1 <?xml version="1.0" encoding="UTF-8"?>
2 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
3 "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
5 <book id="drmDevelopersGuide">
7 <title>Linux DRM Developer's Guide</title>
11 <firstname>Jesse</firstname>
12 <surname>Barnes</surname>
13 <contrib>Initial version</contrib>
15 <orgname>Intel Corporation</orgname>
17 <email>jesse.barnes@intel.com</email>
22 <firstname>Laurent</firstname>
23 <surname>Pinchart</surname>
24 <contrib>Driver internals</contrib>
26 <orgname>Ideas on board SPRL</orgname>
28 <email>laurent.pinchart@ideasonboard.com</email>
33 <firstname>Daniel</firstname>
34 <surname>Vetter</surname>
35 <contrib>Contributions all over the place</contrib>
37 <orgname>Intel Corporation</orgname>
39 <email>daniel.vetter@ffwll.ch</email>
46 <year>2008-2009</year>
47 <year>2013-2014</year>
48 <holder>Intel Corporation</holder>
52 <holder>Laurent Pinchart</holder>
57 The contents of this file may be used under the terms of the GNU
58 General Public License version 2 (the "GPL") as distributed in
59 the kernel source COPYING file.
64 <!-- Put document revisions here, newest first. -->
66 <revnumber>1.0</revnumber>
67 <date>2012-07-13</date>
68 <authorinitials>LP</authorinitials>
69 <revremark>Added extensive documentation about driver internals.
78 <title>DRM Core</title>
81 This first part of the DRM Developer's Guide documents core DRM code,
82 helper libraries for writting drivers and generic userspace interfaces
83 exposed by DRM drivers.
87 <chapter id="drmIntroduction">
88 <title>Introduction</title>
90 The Linux DRM layer contains code intended to support the needs
91 of complex graphics devices, usually containing programmable
92 pipelines well suited to 3D graphics acceleration. Graphics
93 drivers in the kernel may make use of DRM functions to make
94 tasks like memory management, interrupt handling and DMA easier,
95 and provide a uniform interface to applications.
98 A note on versions: this guide covers features found in the DRM
99 tree, including the TTM memory manager, output configuration and
100 mode setting, and the new vblank internals, in addition to all
101 the regular features found in current kernels.
104 [Insert diagram of typical DRM stack here]
110 <chapter id="drmInternals">
111 <title>DRM Internals</title>
113 This chapter documents DRM internals relevant to driver authors
114 and developers working to add support for the latest features to
118 First, we go over some typical driver initialization
119 requirements, like setting up command buffers, creating an
120 initial output configuration, and initializing core services.
121 Subsequent sections cover core internals in more detail,
122 providing implementation notes and examples.
125 The DRM layer provides several services to graphics drivers,
126 many of them driven by the application interfaces it provides
127 through libdrm, the library that wraps most of the DRM ioctls.
128 These include vblank event handling, memory
129 management, output management, framebuffer management, command
130 submission & fencing, suspend/resume support, and DMA
134 <!-- Internals: driver init -->
137 <title>Driver Initialization</title>
139 At the core of every DRM driver is a <structname>drm_driver</structname>
140 structure. Drivers typically statically initialize a drm_driver structure,
141 and then pass it to one of the <function>drm_*_init()</function> functions
142 to register it with the DRM subsystem.
145 The <structname>drm_driver</structname> structure contains static
146 information that describes the driver and features it supports, and
147 pointers to methods that the DRM core will call to implement the DRM API.
148 We will first go through the <structname>drm_driver</structname> static
149 information fields, and will then describe individual operations in
150 details as they get used in later sections.
153 <title>Driver Information</title>
155 <title>Driver Features</title>
157 Drivers inform the DRM core about their requirements and supported
158 features by setting appropriate flags in the
159 <structfield>driver_features</structfield> field. Since those flags
160 influence the DRM core behaviour since registration time, most of them
161 must be set to registering the <structname>drm_driver</structname>
164 <synopsis>u32 driver_features;</synopsis>
166 <title>Driver Feature Flags</title>
168 <term>DRIVER_USE_AGP</term>
170 Driver uses AGP interface, the DRM core will manage AGP resources.
174 <term>DRIVER_REQUIRE_AGP</term>
176 Driver needs AGP interface to function. AGP initialization failure
177 will become a fatal error.
181 <term>DRIVER_PCI_DMA</term>
183 Driver is capable of PCI DMA, mapping of PCI DMA buffers to
184 userspace will be enabled. Deprecated.
188 <term>DRIVER_SG</term>
190 Driver can perform scatter/gather DMA, allocation and mapping of
191 scatter/gather buffers will be enabled. Deprecated.
195 <term>DRIVER_HAVE_DMA</term>
197 Driver supports DMA, the userspace DMA API will be supported.
202 <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
204 DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler
205 managed by the DRM Core. The core will support simple IRQ handler
206 installation when the flag is set. The installation process is
207 described in <xref linkend="drm-irq-registration"/>.</para>
208 <para>DRIVER_IRQ_SHARED indicates whether the device & handler
209 support shared IRQs (note that this is required of PCI drivers).
213 <term>DRIVER_GEM</term>
215 Driver use the GEM memory manager.
219 <term>DRIVER_MODESET</term>
221 Driver supports mode setting interfaces (KMS).
225 <term>DRIVER_PRIME</term>
227 Driver implements DRM PRIME buffer sharing.
231 <term>DRIVER_RENDER</term>
233 Driver supports dedicated render nodes.
239 <title>Major, Minor and Patchlevel</title>
242 int patchlevel;</synopsis>
244 The DRM core identifies driver versions by a major, minor and patch
245 level triplet. The information is printed to the kernel log at
246 initialization time and passed to userspace through the
247 DRM_IOCTL_VERSION ioctl.
250 The major and minor numbers are also used to verify the requested driver
251 API version passed to DRM_IOCTL_SET_VERSION. When the driver API changes
252 between minor versions, applications can call DRM_IOCTL_SET_VERSION to
253 select a specific version of the API. If the requested major isn't equal
254 to the driver major, or the requested minor is larger than the driver
255 minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise
256 the driver's set_version() method will be called with the requested
261 <title>Name, Description and Date</title>
262 <synopsis>char *name;
264 char *date;</synopsis>
266 The driver name is printed to the kernel log at initialization time,
267 used for IRQ registration and passed to userspace through
271 The driver description is a purely informative string passed to
272 userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by
276 The driver date, formatted as YYYYMMDD, is meant to identify the date of
277 the latest modification to the driver. However, as most drivers fail to
278 update it, its value is mostly useless. The DRM core prints it to the
279 kernel log at initialization time and passes it to userspace through the
280 DRM_IOCTL_VERSION ioctl.
285 <title>Driver Load</title>
287 The <methodname>load</methodname> method is the driver and device
288 initialization entry point. The method is responsible for allocating and
289 initializing driver private data, performing resource allocation and
290 mapping (e.g. acquiring
291 clocks, mapping registers or allocating command buffers), initializing
292 the memory manager (<xref linkend="drm-memory-management"/>), installing
293 the IRQ handler (<xref linkend="drm-irq-registration"/>), setting up
294 vertical blanking handling (<xref linkend="drm-vertical-blank"/>), mode
295 setting (<xref linkend="drm-mode-setting"/>) and initial output
296 configuration (<xref linkend="drm-kms-init"/>).
299 If compatibility is a concern (e.g. with drivers converted over from
300 User Mode Setting to Kernel Mode Setting), care must be taken to prevent
301 device initialization and control that is incompatible with currently
302 active userspace drivers. For instance, if user level mode setting
303 drivers are in use, it would be problematic to perform output discovery
304 & configuration at load time. Likewise, if user-level drivers
305 unaware of memory management are in use, memory management and command
306 buffer setup may need to be omitted. These requirements are
307 driver-specific, and care needs to be taken to keep both old and new
308 applications and libraries working.
310 <synopsis>int (*load) (struct drm_device *, unsigned long flags);</synopsis>
312 The method takes two arguments, a pointer to the newly created
313 <structname>drm_device</structname> and flags. The flags are used to
314 pass the <structfield>driver_data</structfield> field of the device id
315 corresponding to the device passed to <function>drm_*_init()</function>.
316 Only PCI devices currently use this, USB and platform DRM drivers have
317 their <methodname>load</methodname> method called with flags to 0.
320 <title>Driver Private Data</title>
322 The driver private hangs off the main
323 <structname>drm_device</structname> structure and can be used for
324 tracking various device-specific bits of information, like register
325 offsets, command buffer status, register state for suspend/resume, etc.
326 At load time, a driver may simply allocate one and set
327 <structname>drm_device</structname>.<structfield>dev_priv</structfield>
328 appropriately; it should be freed and
329 <structname>drm_device</structname>.<structfield>dev_priv</structfield>
330 set to NULL when the driver is unloaded.
333 <sect3 id="drm-irq-registration">
334 <title>IRQ Registration</title>
336 The DRM core tries to facilitate IRQ handler registration and
337 unregistration by providing <function>drm_irq_install</function> and
338 <function>drm_irq_uninstall</function> functions. Those functions only
339 support a single interrupt per device, devices that use more than one
340 IRQs need to be handled manually.
343 <title>Managed IRQ Registration</title>
345 Both the <function>drm_irq_install</function> and
346 <function>drm_irq_uninstall</function> functions get the device IRQ by
347 calling <function>drm_dev_to_irq</function>. This inline function will
348 call a bus-specific operation to retrieve the IRQ number. For platform
349 devices, <function>platform_get_irq</function>(..., 0) is used to
350 retrieve the IRQ number.
353 <function>drm_irq_install</function> starts by calling the
354 <methodname>irq_preinstall</methodname> driver operation. The operation
355 is optional and must make sure that the interrupt will not get fired by
356 clearing all pending interrupt flags or disabling the interrupt.
359 The IRQ will then be requested by a call to
360 <function>request_irq</function>. If the DRIVER_IRQ_SHARED driver
361 feature flag is set, a shared (IRQF_SHARED) IRQ handler will be
365 The IRQ handler function must be provided as the mandatory irq_handler
366 driver operation. It will get passed directly to
367 <function>request_irq</function> and thus has the same prototype as all
368 IRQ handlers. It will get called with a pointer to the DRM device as the
372 Finally the function calls the optional
373 <methodname>irq_postinstall</methodname> driver operation. The operation
374 usually enables interrupts (excluding the vblank interrupt, which is
375 enabled separately), but drivers may choose to enable/disable interrupts
379 <function>drm_irq_uninstall</function> is similarly used to uninstall an
380 IRQ handler. It starts by waking up all processes waiting on a vblank
381 interrupt to make sure they don't hang, and then calls the optional
382 <methodname>irq_uninstall</methodname> driver operation. The operation
383 must disable all hardware interrupts. Finally the function frees the IRQ
384 by calling <function>free_irq</function>.
388 <title>Manual IRQ Registration</title>
390 Drivers that require multiple interrupt handlers can't use the managed
391 IRQ registration functions. In that case IRQs must be registered and
392 unregistered manually (usually with the <function>request_irq</function>
393 and <function>free_irq</function> functions, or their devm_* equivalent).
396 When manually registering IRQs, drivers must not set the DRIVER_HAVE_IRQ
397 driver feature flag, and must not provide the
398 <methodname>irq_handler</methodname> driver operation. They must set the
399 <structname>drm_device</structname> <structfield>irq_enabled</structfield>
400 field to 1 upon registration of the IRQs, and clear it to 0 after
401 unregistering the IRQs.
406 <title>Memory Manager Initialization</title>
408 Every DRM driver requires a memory manager which must be initialized at
409 load time. DRM currently contains two memory managers, the Translation
410 Table Manager (TTM) and the Graphics Execution Manager (GEM).
411 This document describes the use of the GEM memory manager only. See
412 <xref linkend="drm-memory-management"/> for details.
416 <title>Miscellaneous Device Configuration</title>
418 Another task that may be necessary for PCI devices during configuration
419 is mapping the video BIOS. On many devices, the VBIOS describes device
420 configuration, LCD panel timings (if any), and contains flags indicating
421 device state. Mapping the BIOS can be done using the pci_map_rom() call,
422 a convenience function that takes care of mapping the actual ROM,
423 whether it has been shadowed into memory (typically at address 0xc0000)
424 or exists on the PCI device in the ROM BAR. Note that after the ROM has
425 been mapped and any necessary information has been extracted, it should
426 be unmapped; on many devices, the ROM address decoder is shared with
427 other BARs, so leaving it mapped could cause undesired behaviour like
428 hangs or memory corruption.
429 <!--!Fdrivers/pci/rom.c pci_map_rom-->
435 <!-- Internals: memory management -->
437 <sect1 id="drm-memory-management">
438 <title>Memory management</title>
440 Modern Linux systems require large amount of graphics memory to store
441 frame buffers, textures, vertices and other graphics-related data. Given
442 the very dynamic nature of many of that data, managing graphics memory
443 efficiently is thus crucial for the graphics stack and plays a central
444 role in the DRM infrastructure.
447 The DRM core includes two memory managers, namely Translation Table Maps
448 (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory
449 manager to be developed and tried to be a one-size-fits-them all
450 solution. It provides a single userspace API to accommodate the need of
451 all hardware, supporting both Unified Memory Architecture (UMA) devices
452 and devices with dedicated video RAM (i.e. most discrete video cards).
453 This resulted in a large, complex piece of code that turned out to be
454 hard to use for driver development.
457 GEM started as an Intel-sponsored project in reaction to TTM's
458 complexity. Its design philosophy is completely different: instead of
459 providing a solution to every graphics memory-related problems, GEM
460 identified common code between drivers and created a support library to
461 share it. GEM has simpler initialization and execution requirements than
462 TTM, but has no video RAM management capabitilies and is thus limited to
466 <title>The Translation Table Manager (TTM)</title>
468 TTM design background and information belongs here.
471 <title>TTM initialization</title>
472 <warning><para>This section is outdated.</para></warning>
474 Drivers wishing to support TTM must fill out a drm_bo_driver
475 structure. The structure contains several fields with function
476 pointers for initializing the TTM, allocating and freeing memory,
477 waiting for command completion and fence synchronization, and memory
478 migration. See the radeon_ttm.c file for an example of usage.
481 The ttm_global_reference structure is made up of several fields:
484 struct ttm_global_reference {
485 enum ttm_global_types global_type;
488 int (*init) (struct ttm_global_reference *);
489 void (*release) (struct ttm_global_reference *);
493 There should be one global reference structure for your memory
494 manager as a whole, and there will be others for each object
495 created by the memory manager at runtime. Your global TTM should
496 have a type of TTM_GLOBAL_TTM_MEM. The size field for the global
497 object should be sizeof(struct ttm_mem_global), and the init and
498 release hooks should point at your driver-specific init and
499 release routines, which probably eventually call
500 ttm_mem_global_init and ttm_mem_global_release, respectively.
503 Once your global TTM accounting structure is set up and initialized
504 by calling ttm_global_item_ref() on it,
505 you need to create a buffer object TTM to
506 provide a pool for buffer object allocation by clients and the
507 kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO,
508 and its size should be sizeof(struct ttm_bo_global). Again,
509 driver-specific init and release functions may be provided,
510 likely eventually calling ttm_bo_global_init() and
511 ttm_bo_global_release(), respectively. Also, like the previous
512 object, ttm_global_item_ref() is used to create an initial reference
513 count for the TTM, which will call your initialization function.
518 <title>The Graphics Execution Manager (GEM)</title>
520 The GEM design approach has resulted in a memory manager that doesn't
521 provide full coverage of all (or even all common) use cases in its
522 userspace or kernel API. GEM exposes a set of standard memory-related
523 operations to userspace and a set of helper functions to drivers, and let
524 drivers implement hardware-specific operations with their own private API.
527 The GEM userspace API is described in the
528 <ulink url="http://lwn.net/Articles/283798/"><citetitle>GEM - the Graphics
529 Execution Manager</citetitle></ulink> article on LWN. While slightly
530 outdated, the document provides a good overview of the GEM API principles.
531 Buffer allocation and read and write operations, described as part of the
532 common GEM API, are currently implemented using driver-specific ioctls.
535 GEM is data-agnostic. It manages abstract buffer objects without knowing
536 what individual buffers contain. APIs that require knowledge of buffer
537 contents or purpose, such as buffer allocation or synchronization
538 primitives, are thus outside of the scope of GEM and must be implemented
539 using driver-specific ioctls.
542 On a fundamental level, GEM involves several operations:
544 <listitem>Memory allocation and freeing</listitem>
545 <listitem>Command execution</listitem>
546 <listitem>Aperture management at command execution time</listitem>
548 Buffer object allocation is relatively straightforward and largely
549 provided by Linux's shmem layer, which provides memory to back each
553 Device-specific operations, such as command execution, pinning, buffer
554 read & write, mapping, and domain ownership transfers are left to
555 driver-specific ioctls.
558 <title>GEM Initialization</title>
560 Drivers that use GEM must set the DRIVER_GEM bit in the struct
561 <structname>drm_driver</structname>
562 <structfield>driver_features</structfield> field. The DRM core will
563 then automatically initialize the GEM core before calling the
564 <methodname>load</methodname> operation. Behind the scene, this will
565 create a DRM Memory Manager object which provides an address space
566 pool for object allocation.
569 In a KMS configuration, drivers need to allocate and initialize a
570 command ring buffer following core GEM initialization if required by
571 the hardware. UMA devices usually have what is called a "stolen"
572 memory region, which provides space for the initial framebuffer and
573 large, contiguous memory regions required by the device. This space is
574 typically not managed by GEM, and must be initialized separately into
575 its own DRM MM object.
579 <title>GEM Objects Creation</title>
581 GEM splits creation of GEM objects and allocation of the memory that
582 backs them in two distinct operations.
585 GEM objects are represented by an instance of struct
586 <structname>drm_gem_object</structname>. Drivers usually need to extend
587 GEM objects with private information and thus create a driver-specific
588 GEM object structure type that embeds an instance of struct
589 <structname>drm_gem_object</structname>.
592 To create a GEM object, a driver allocates memory for an instance of its
593 specific GEM object type and initializes the embedded struct
594 <structname>drm_gem_object</structname> with a call to
595 <function>drm_gem_object_init</function>. The function takes a pointer to
596 the DRM device, a pointer to the GEM object and the buffer object size
600 GEM uses shmem to allocate anonymous pageable memory.
601 <function>drm_gem_object_init</function> will create an shmfs file of
602 the requested size and store it into the struct
603 <structname>drm_gem_object</structname> <structfield>filp</structfield>
604 field. The memory is used as either main storage for the object when the
605 graphics hardware uses system memory directly or as a backing store
609 Drivers are responsible for the actual physical pages allocation by
610 calling <function>shmem_read_mapping_page_gfp</function> for each page.
611 Note that they can decide to allocate pages when initializing the GEM
612 object, or to delay allocation until the memory is needed (for instance
613 when a page fault occurs as a result of a userspace memory access or
614 when the driver needs to start a DMA transfer involving the memory).
617 Anonymous pageable memory allocation is not always desired, for instance
618 when the hardware requires physically contiguous system memory as is
619 often the case in embedded devices. Drivers can create GEM objects with
620 no shmfs backing (called private GEM objects) by initializing them with
621 a call to <function>drm_gem_private_object_init</function> instead of
622 <function>drm_gem_object_init</function>. Storage for private GEM
623 objects must be managed by drivers.
626 Drivers that do not need to extend GEM objects with private information
627 can call the <function>drm_gem_object_alloc</function> function to
628 allocate and initialize a struct <structname>drm_gem_object</structname>
629 instance. The GEM core will call the optional driver
630 <methodname>gem_init_object</methodname> operation after initializing
631 the GEM object with <function>drm_gem_object_init</function>.
632 <synopsis>int (*gem_init_object) (struct drm_gem_object *obj);</synopsis>
635 No alloc-and-init function exists for private GEM objects.
639 <title>GEM Objects Lifetime</title>
641 All GEM objects are reference-counted by the GEM core. References can be
642 acquired and release by <function>calling drm_gem_object_reference</function>
643 and <function>drm_gem_object_unreference</function> respectively. The
644 caller must hold the <structname>drm_device</structname>
645 <structfield>struct_mutex</structfield> lock. As a convenience, GEM
646 provides the <function>drm_gem_object_reference_unlocked</function> and
647 <function>drm_gem_object_unreference_unlocked</function> functions that
648 can be called without holding the lock.
651 When the last reference to a GEM object is released the GEM core calls
652 the <structname>drm_driver</structname>
653 <methodname>gem_free_object</methodname> operation. That operation is
654 mandatory for GEM-enabled drivers and must free the GEM object and all
655 associated resources.
658 <synopsis>void (*gem_free_object) (struct drm_gem_object *obj);</synopsis>
659 Drivers are responsible for freeing all GEM object resources, including
660 the resources created by the GEM core. If an mmap offset has been
661 created for the object (in which case
662 <structname>drm_gem_object</structname>::<structfield>map_list</structfield>::<structfield>map</structfield>
663 is not NULL) it must be freed by a call to
664 <function>drm_gem_free_mmap_offset</function>. The shmfs backing store
665 must be released by calling <function>drm_gem_object_release</function>
666 (that function can safely be called if no shmfs backing store has been
671 <title>GEM Objects Naming</title>
673 Communication between userspace and the kernel refers to GEM objects
674 using local handles, global names or, more recently, file descriptors.
675 All of those are 32-bit integer values; the usual Linux kernel limits
676 apply to the file descriptors.
679 GEM handles are local to a DRM file. Applications get a handle to a GEM
680 object through a driver-specific ioctl, and can use that handle to refer
681 to the GEM object in other standard or driver-specific ioctls. Closing a
682 DRM file handle frees all its GEM handles and dereferences the
683 associated GEM objects.
686 To create a handle for a GEM object drivers call
687 <function>drm_gem_handle_create</function>. The function takes a pointer
688 to the DRM file and the GEM object and returns a locally unique handle.
689 When the handle is no longer needed drivers delete it with a call to
690 <function>drm_gem_handle_delete</function>. Finally the GEM object
691 associated with a handle can be retrieved by a call to
692 <function>drm_gem_object_lookup</function>.
695 Handles don't take ownership of GEM objects, they only take a reference
696 to the object that will be dropped when the handle is destroyed. To
697 avoid leaking GEM objects, drivers must make sure they drop the
698 reference(s) they own (such as the initial reference taken at object
699 creation time) as appropriate, without any special consideration for the
700 handle. For example, in the particular case of combined GEM object and
701 handle creation in the implementation of the
702 <methodname>dumb_create</methodname> operation, drivers must drop the
703 initial reference to the GEM object before returning the handle.
706 GEM names are similar in purpose to handles but are not local to DRM
707 files. They can be passed between processes to reference a GEM object
708 globally. Names can't be used directly to refer to objects in the DRM
709 API, applications must convert handles to names and names to handles
710 using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls
711 respectively. The conversion is handled by the DRM core without any
712 driver-specific support.
715 GEM also supports buffer sharing with dma-buf file descriptors through
716 PRIME. GEM-based drivers must use the provided helpers functions to
717 implement the exporting and importing correctly. See <xref linkend="drm-prime-support" />.
718 Since sharing file descriptors is inherently more secure than the
719 easily guessable and global GEM names it is the preferred buffer
720 sharing mechanism. Sharing buffers through GEM names is only supported
721 for legacy userspace. Furthermore PRIME also allows cross-device
722 buffer sharing since it is based on dma-bufs.
725 <sect3 id="drm-gem-objects-mapping">
726 <title>GEM Objects Mapping</title>
728 Because mapping operations are fairly heavyweight GEM favours
729 read/write-like access to buffers, implemented through driver-specific
730 ioctls, over mapping buffers to userspace. However, when random access
731 to the buffer is needed (to perform software rendering for instance),
732 direct access to the object can be more efficient.
735 The mmap system call can't be used directly to map GEM objects, as they
736 don't have their own file handle. Two alternative methods currently
737 co-exist to map GEM objects to userspace. The first method uses a
738 driver-specific ioctl to perform the mapping operation, calling
739 <function>do_mmap</function> under the hood. This is often considered
740 dubious, seems to be discouraged for new GEM-enabled drivers, and will
741 thus not be described here.
744 The second method uses the mmap system call on the DRM file handle.
745 <synopsis>void *mmap(void *addr, size_t length, int prot, int flags, int fd,
746 off_t offset);</synopsis>
747 DRM identifies the GEM object to be mapped by a fake offset passed
748 through the mmap offset argument. Prior to being mapped, a GEM object
749 must thus be associated with a fake offset. To do so, drivers must call
750 <function>drm_gem_create_mmap_offset</function> on the object. The
751 function allocates a fake offset range from a pool and stores the
752 offset divided by PAGE_SIZE in
753 <literal>obj->map_list.hash.key</literal>. Care must be taken not to
754 call <function>drm_gem_create_mmap_offset</function> if a fake offset
755 has already been allocated for the object. This can be tested by
756 <literal>obj->map_list.map</literal> being non-NULL.
759 Once allocated, the fake offset value
760 (<literal>obj->map_list.hash.key << PAGE_SHIFT</literal>)
761 must be passed to the application in a driver-specific way and can then
762 be used as the mmap offset argument.
765 The GEM core provides a helper method <function>drm_gem_mmap</function>
766 to handle object mapping. The method can be set directly as the mmap
767 file operation handler. It will look up the GEM object based on the
768 offset value and set the VMA operations to the
769 <structname>drm_driver</structname> <structfield>gem_vm_ops</structfield>
770 field. Note that <function>drm_gem_mmap</function> doesn't map memory to
771 userspace, but relies on the driver-provided fault handler to map pages
775 To use <function>drm_gem_mmap</function>, drivers must fill the struct
776 <structname>drm_driver</structname> <structfield>gem_vm_ops</structfield>
777 field with a pointer to VM operations.
780 <synopsis>struct vm_operations_struct *gem_vm_ops
782 struct vm_operations_struct {
783 void (*open)(struct vm_area_struct * area);
784 void (*close)(struct vm_area_struct * area);
785 int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf);
789 The <methodname>open</methodname> and <methodname>close</methodname>
790 operations must update the GEM object reference count. Drivers can use
791 the <function>drm_gem_vm_open</function> and
792 <function>drm_gem_vm_close</function> helper functions directly as open
796 The fault operation handler is responsible for mapping individual pages
797 to userspace when a page fault occurs. Depending on the memory
798 allocation scheme, drivers can allocate pages at fault time, or can
799 decide to allocate memory for the GEM object at the time the object is
803 Drivers that want to map the GEM object upfront instead of handling page
804 faults can implement their own mmap file operation handler.
808 <title>Memory Coherency</title>
810 When mapped to the device or used in a command buffer, backing pages
811 for an object are flushed to memory and marked write combined so as to
812 be coherent with the GPU. Likewise, if the CPU accesses an object
813 after the GPU has finished rendering to the object, then the object
814 must be made coherent with the CPU's view of memory, usually involving
815 GPU cache flushing of various kinds. This core CPU<->GPU
816 coherency management is provided by a device-specific ioctl, which
817 evaluates an object's current domain and performs any necessary
818 flushing or synchronization to put the object into the desired
819 coherency domain (note that the object may be busy, i.e. an active
820 render target; in that case, setting the domain blocks the client and
821 waits for rendering to complete before performing any necessary
822 flushing operations).
826 <title>Command Execution</title>
828 Perhaps the most important GEM function for GPU devices is providing a
829 command execution interface to clients. Client programs construct
830 command buffers containing references to previously allocated memory
831 objects, and then submit them to GEM. At that point, GEM takes care to
832 bind all the objects into the GTT, execute the buffer, and provide
833 necessary synchronization between clients accessing the same buffers.
834 This often involves evicting some objects from the GTT and re-binding
835 others (a fairly expensive operation), and providing relocation
836 support which hides fixed GTT offsets from clients. Clients must take
837 care not to submit command buffers that reference more objects than
838 can fit in the GTT; otherwise, GEM will reject them and no rendering
839 will occur. Similarly, if several objects in the buffer require fence
840 registers to be allocated for correct rendering (e.g. 2D blits on
841 pre-965 chips), care must be taken not to require more fence registers
842 than are available to the client. Such resource management should be
843 abstracted from the client in libdrm.
847 <title>GEM Function Reference</title>
848 !Edrivers/gpu/drm/drm_gem.c
852 <title>VMA Offset Manager</title>
853 !Pdrivers/gpu/drm/drm_vma_manager.c vma offset manager
854 !Edrivers/gpu/drm/drm_vma_manager.c
855 !Iinclude/drm/drm_vma_manager.h
857 <sect2 id="drm-prime-support">
858 <title>PRIME Buffer Sharing</title>
860 PRIME is the cross device buffer sharing framework in drm, originally
861 created for the OPTIMUS range of multi-gpu platforms. To userspace
862 PRIME buffers are dma-buf based file descriptors.
865 <title>Overview and Driver Interface</title>
867 Similar to GEM global names, PRIME file descriptors are
868 also used to share buffer objects across processes. They offer
869 additional security: as file descriptors must be explicitly sent over
870 UNIX domain sockets to be shared between applications, they can't be
871 guessed like the globally unique GEM names.
874 Drivers that support the PRIME
875 API must set the DRIVER_PRIME bit in the struct
876 <structname>drm_driver</structname>
877 <structfield>driver_features</structfield> field, and implement the
878 <methodname>prime_handle_to_fd</methodname> and
879 <methodname>prime_fd_to_handle</methodname> operations.
882 <synopsis>int (*prime_handle_to_fd)(struct drm_device *dev,
883 struct drm_file *file_priv, uint32_t handle,
884 uint32_t flags, int *prime_fd);
885 int (*prime_fd_to_handle)(struct drm_device *dev,
886 struct drm_file *file_priv, int prime_fd,
887 uint32_t *handle);</synopsis>
888 Those two operations convert a handle to a PRIME file descriptor and
889 vice versa. Drivers must use the kernel dma-buf buffer sharing framework
890 to manage the PRIME file descriptors. Similar to the mode setting
891 API PRIME is agnostic to the underlying buffer object manager, as
892 long as handles are 32bit unsinged integers.
895 While non-GEM drivers must implement the operations themselves, GEM
896 drivers must use the <function>drm_gem_prime_handle_to_fd</function>
897 and <function>drm_gem_prime_fd_to_handle</function> helper functions.
898 Those helpers rely on the driver
899 <methodname>gem_prime_export</methodname> and
900 <methodname>gem_prime_import</methodname> operations to create a dma-buf
901 instance from a GEM object (dma-buf exporter role) and to create a GEM
902 object from a dma-buf instance (dma-buf importer role).
905 <synopsis>struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
906 struct drm_gem_object *obj,
908 struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev,
909 struct dma_buf *dma_buf);</synopsis>
910 These two operations are mandatory for GEM drivers that support
915 <title>PRIME Helper Functions</title>
916 !Pdrivers/gpu/drm/drm_prime.c PRIME Helpers
920 <title>PRIME Function References</title>
921 !Edrivers/gpu/drm/drm_prime.c
924 <title>DRM MM Range Allocator</title>
926 <title>Overview</title>
927 !Pdrivers/gpu/drm/drm_mm.c Overview
930 <title>LRU Scan/Eviction Support</title>
931 !Pdrivers/gpu/drm/drm_mm.c lru scan roaster
935 <title>DRM MM Range Allocator Function References</title>
936 !Edrivers/gpu/drm/drm_mm.c
937 !Iinclude/drm/drm_mm.h
941 <!-- Internals: mode setting -->
943 <sect1 id="drm-mode-setting">
944 <title>Mode Setting</title>
946 Drivers must initialize the mode setting core by calling
947 <function>drm_mode_config_init</function> on the DRM device. The function
948 initializes the <structname>drm_device</structname>
949 <structfield>mode_config</structfield> field and never fails. Once done,
950 mode configuration must be setup by initializing the following fields.
954 <synopsis>int min_width, min_height;
955 int max_width, max_height;</synopsis>
957 Minimum and maximum width and height of the frame buffers in pixel
962 <synopsis>struct drm_mode_config_funcs *funcs;</synopsis>
963 <para>Mode setting functions.</para>
967 <title>Display Modes Function Reference</title>
968 !Iinclude/drm/drm_modes.h
969 !Edrivers/gpu/drm/drm_modes.c
972 <title>Frame Buffer Creation</title>
973 <synopsis>struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
974 struct drm_file *file_priv,
975 struct drm_mode_fb_cmd2 *mode_cmd);</synopsis>
977 Frame buffers are abstract memory objects that provide a source of
978 pixels to scanout to a CRTC. Applications explicitly request the
979 creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and
980 receive an opaque handle that can be passed to the KMS CRTC control,
981 plane configuration and page flip functions.
984 Frame buffers rely on the underneath memory manager for low-level memory
985 operations. When creating a frame buffer applications pass a memory
986 handle (or a list of memory handles for multi-planar formats) through
987 the <parameter>drm_mode_fb_cmd2</parameter> argument. For drivers using
988 GEM as their userspace buffer management interface this would be a GEM
989 handle. Drivers are however free to use their own backing storage object
990 handles, e.g. vmwgfx directly exposes special TTM handles to userspace
991 and so expects TTM handles in the create ioctl and not GEM handles.
994 Drivers must first validate the requested frame buffer parameters passed
995 through the mode_cmd argument. In particular this is where invalid
996 sizes, pixel formats or pitches can be caught.
999 If the parameters are deemed valid, drivers then create, initialize and
1000 return an instance of struct <structname>drm_framebuffer</structname>.
1001 If desired the instance can be embedded in a larger driver-specific
1002 structure. Drivers must fill its <structfield>width</structfield>,
1003 <structfield>height</structfield>, <structfield>pitches</structfield>,
1004 <structfield>offsets</structfield>, <structfield>depth</structfield>,
1005 <structfield>bits_per_pixel</structfield> and
1006 <structfield>pixel_format</structfield> fields from the values passed
1007 through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
1008 should call the <function>drm_helper_mode_fill_fb_struct</function>
1009 helper function to do so.
1013 The initialization of the new framebuffer instance is finalized with a
1014 call to <function>drm_framebuffer_init</function> which takes a pointer
1015 to DRM frame buffer operations (struct
1016 <structname>drm_framebuffer_funcs</structname>). Note that this function
1017 publishes the framebuffer and so from this point on it can be accessed
1018 concurrently from other threads. Hence it must be the last step in the
1019 driver's framebuffer initialization sequence. Frame buffer operations
1023 <synopsis>int (*create_handle)(struct drm_framebuffer *fb,
1024 struct drm_file *file_priv, unsigned int *handle);</synopsis>
1026 Create a handle to the frame buffer underlying memory object. If
1027 the frame buffer uses a multi-plane format, the handle will
1028 reference the memory object associated with the first plane.
1031 Drivers call <function>drm_gem_handle_create</function> to create
1036 <synopsis>void (*destroy)(struct drm_framebuffer *framebuffer);</synopsis>
1038 Destroy the frame buffer object and frees all associated
1039 resources. Drivers must call
1040 <function>drm_framebuffer_cleanup</function> to free resources
1041 allocated by the DRM core for the frame buffer object, and must
1042 make sure to unreference all memory objects associated with the
1043 frame buffer. Handles created by the
1044 <methodname>create_handle</methodname> operation are released by
1049 <synopsis>int (*dirty)(struct drm_framebuffer *framebuffer,
1050 struct drm_file *file_priv, unsigned flags, unsigned color,
1051 struct drm_clip_rect *clips, unsigned num_clips);</synopsis>
1053 This optional operation notifies the driver that a region of the
1054 frame buffer has changed in response to a DRM_IOCTL_MODE_DIRTYFB
1061 The lifetime of a drm framebuffer is controlled with a reference count,
1062 drivers can grab additional references with
1063 <function>drm_framebuffer_reference</function>and drop them
1064 again with <function>drm_framebuffer_unreference</function>. For
1065 driver-private framebuffers for which the last reference is never
1066 dropped (e.g. for the fbdev framebuffer when the struct
1067 <structname>drm_framebuffer</structname> is embedded into the fbdev
1068 helper struct) drivers can manually clean up a framebuffer at module
1070 <function>drm_framebuffer_unregister_private</function>.
1074 <title>Dumb Buffer Objects</title>
1076 The KMS API doesn't standardize backing storage object creation and
1077 leaves it to driver-specific ioctls. Furthermore actually creating a
1078 buffer object even for GEM-based drivers is done through a
1079 driver-specific ioctl - GEM only has a common userspace interface for
1080 sharing and destroying objects. While not an issue for full-fledged
1081 graphics stacks that include device-specific userspace components (in
1082 libdrm for instance), this limit makes DRM-based early boot graphics
1083 unnecessarily complex.
1086 Dumb objects partly alleviate the problem by providing a standard
1087 API to create dumb buffers suitable for scanout, which can then be used
1088 to create KMS frame buffers.
1091 To support dumb objects drivers must implement the
1092 <methodname>dumb_create</methodname>,
1093 <methodname>dumb_destroy</methodname> and
1094 <methodname>dumb_map_offset</methodname> operations.
1098 <synopsis>int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev,
1099 struct drm_mode_create_dumb *args);</synopsis>
1101 The <methodname>dumb_create</methodname> operation creates a driver
1102 object (GEM or TTM handle) suitable for scanout based on the
1103 width, height and depth from the struct
1104 <structname>drm_mode_create_dumb</structname> argument. It fills the
1105 argument's <structfield>handle</structfield>,
1106 <structfield>pitch</structfield> and <structfield>size</structfield>
1107 fields with a handle for the newly created object and its line
1108 pitch and size in bytes.
1112 <synopsis>int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev,
1113 uint32_t handle);</synopsis>
1115 The <methodname>dumb_destroy</methodname> operation destroys a dumb
1116 object created by <methodname>dumb_create</methodname>.
1120 <synopsis>int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev,
1121 uint32_t handle, uint64_t *offset);</synopsis>
1123 The <methodname>dumb_map_offset</methodname> operation associates an
1124 mmap fake offset with the object given by the handle and returns
1125 it. Drivers must use the
1126 <function>drm_gem_create_mmap_offset</function> function to
1127 associate the fake offset as described in
1128 <xref linkend="drm-gem-objects-mapping"/>.
1133 Note that dumb objects may not be used for gpu acceleration, as has been
1134 attempted on some ARM embedded platforms. Such drivers really must have
1135 a hardware-specific ioctl to allocate suitable buffer objects.
1139 <title>Output Polling</title>
1140 <synopsis>void (*output_poll_changed)(struct drm_device *dev);</synopsis>
1142 This operation notifies the driver that the status of one or more
1143 connectors has changed. Drivers that use the fb helper can just call the
1144 <function>drm_fb_helper_hotplug_event</function> function to handle this
1149 <title>Locking</title>
1151 Beside some lookup structures with their own locking (which is hidden
1152 behind the interface functions) most of the modeset state is protected
1153 by the <code>dev-<mode_config.lock</code> mutex and additionally
1154 per-crtc locks to allow cursor updates, pageflips and similar operations
1155 to occur concurrently with background tasks like output detection.
1156 Operations which cross domains like a full modeset always grab all
1157 locks. Drivers there need to protect resources shared between crtcs with
1158 additional locking. They also need to be careful to always grab the
1159 relevant crtc locks if a modset functions touches crtc state, e.g. for
1160 load detection (which does only grab the <code>mode_config.lock</code>
1161 to allow concurrent screen updates on live crtcs).
1166 <!-- Internals: kms initialization and cleanup -->
1168 <sect1 id="drm-kms-init">
1169 <title>KMS Initialization and Cleanup</title>
1171 A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders
1172 and connectors. KMS drivers must thus create and initialize all those
1173 objects at load time after initializing mode setting.
1176 <title>CRTCs (struct <structname>drm_crtc</structname>)</title>
1178 A CRTC is an abstraction representing a part of the chip that contains a
1179 pointer to a scanout buffer. Therefore, the number of CRTCs available
1180 determines how many independent scanout buffers can be active at any
1181 given time. The CRTC structure contains several fields to support this:
1182 a pointer to some video memory (abstracted as a frame buffer object), a
1183 display mode, and an (x, y) offset into the video memory to support
1184 panning or configurations where one piece of video memory spans multiple
1188 <title>CRTC Initialization</title>
1190 A KMS device must create and register at least one struct
1191 <structname>drm_crtc</structname> instance. The instance is allocated
1192 and zeroed by the driver, possibly as part of a larger structure, and
1193 registered with a call to <function>drm_crtc_init</function> with a
1194 pointer to CRTC functions.
1197 <sect3 id="drm-kms-crtcops">
1198 <title>CRTC Operations</title>
1200 <title>Set Configuration</title>
1201 <synopsis>int (*set_config)(struct drm_mode_set *set);</synopsis>
1203 Apply a new CRTC configuration to the device. The configuration
1204 specifies a CRTC, a frame buffer to scan out from, a (x,y) position in
1205 the frame buffer, a display mode and an array of connectors to drive
1206 with the CRTC if possible.
1209 If the frame buffer specified in the configuration is NULL, the driver
1210 must detach all encoders connected to the CRTC and all connectors
1211 attached to those encoders and disable them.
1214 This operation is called with the mode config lock held.
1217 Note that the drm core has no notion of restoring the mode setting
1218 state after resume, since all resume handling is in the full
1219 responsibility of the driver. The common mode setting helper library
1220 though provides a helper which can be used for this:
1221 <function>drm_helper_resume_force_mode</function>.
1225 <title>Page Flipping</title>
1226 <synopsis>int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
1227 struct drm_pending_vblank_event *event);</synopsis>
1229 Schedule a page flip to the given frame buffer for the CRTC. This
1230 operation is called with the mode config mutex held.
1233 Page flipping is a synchronization mechanism that replaces the frame
1234 buffer being scanned out by the CRTC with a new frame buffer during
1235 vertical blanking, avoiding tearing. When an application requests a page
1236 flip the DRM core verifies that the new frame buffer is large enough to
1237 be scanned out by the CRTC in the currently configured mode and then
1238 calls the CRTC <methodname>page_flip</methodname> operation with a
1239 pointer to the new frame buffer.
1242 The <methodname>page_flip</methodname> operation schedules a page flip.
1243 Once any pending rendering targeting the new frame buffer has
1244 completed, the CRTC will be reprogrammed to display that frame buffer
1245 after the next vertical refresh. The operation must return immediately
1246 without waiting for rendering or page flip to complete and must block
1247 any new rendering to the frame buffer until the page flip completes.
1250 If a page flip can be successfully scheduled the driver must set the
1251 <code>drm_crtc-<fb</code> field to the new framebuffer pointed to
1252 by <code>fb</code>. This is important so that the reference counting
1253 on framebuffers stays balanced.
1256 If a page flip is already pending, the
1257 <methodname>page_flip</methodname> operation must return
1258 -<errorname>EBUSY</errorname>.
1261 To synchronize page flip to vertical blanking the driver will likely
1262 need to enable vertical blanking interrupts. It should call
1263 <function>drm_vblank_get</function> for that purpose, and call
1264 <function>drm_vblank_put</function> after the page flip completes.
1267 If the application has requested to be notified when page flip completes
1268 the <methodname>page_flip</methodname> operation will be called with a
1269 non-NULL <parameter>event</parameter> argument pointing to a
1270 <structname>drm_pending_vblank_event</structname> instance. Upon page
1271 flip completion the driver must call <methodname>drm_send_vblank_event</methodname>
1272 to fill in the event and send to wake up any waiting processes.
1273 This can be performed with
1274 <programlisting><![CDATA[
1275 spin_lock_irqsave(&dev->event_lock, flags);
1277 drm_send_vblank_event(dev, pipe, event);
1278 spin_unlock_irqrestore(&dev->event_lock, flags);
1279 ]]></programlisting>
1282 FIXME: Could drivers that don't need to wait for rendering to complete
1283 just add the event to <literal>dev->vblank_event_list</literal> and
1284 let the DRM core handle everything, as for "normal" vertical blanking
1288 While waiting for the page flip to complete, the
1289 <literal>event->base.link</literal> list head can be used freely by
1290 the driver to store the pending event in a driver-specific list.
1293 If the file handle is closed before the event is signaled, drivers must
1294 take care to destroy the event in their
1295 <methodname>preclose</methodname> operation (and, if needed, call
1296 <function>drm_vblank_put</function>).
1300 <title>Miscellaneous</title>
1303 <synopsis>void (*set_property)(struct drm_crtc *crtc,
1304 struct drm_property *property, uint64_t value);</synopsis>
1306 Set the value of the given CRTC property to
1307 <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
1308 for more information about properties.
1312 <synopsis>void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
1313 uint32_t start, uint32_t size);</synopsis>
1315 Apply a gamma table to the device. The operation is optional.
1319 <synopsis>void (*destroy)(struct drm_crtc *crtc);</synopsis>
1321 Destroy the CRTC when not needed anymore. See
1322 <xref linkend="drm-kms-init"/>.
1330 <title>Planes (struct <structname>drm_plane</structname>)</title>
1332 A plane represents an image source that can be blended with or overlayed
1333 on top of a CRTC during the scanout process. Planes are associated with
1334 a frame buffer to crop a portion of the image memory (source) and
1335 optionally scale it to a destination size. The result is then blended
1336 with or overlayed on top of a CRTC.
1339 The DRM core recognizes three types of planes:
1342 DRM_PLANE_TYPE_PRIMARY represents a "main" plane for a CRTC. Primary
1343 planes are the planes operated upon by by CRTC modesetting and flipping
1344 operations described in <xref linkend="drm-kms-crtcops"/>.
1347 DRM_PLANE_TYPE_CURSOR represents a "cursor" plane for a CRTC. Cursor
1348 planes are the planes operated upon by the DRM_IOCTL_MODE_CURSOR and
1349 DRM_IOCTL_MODE_CURSOR2 ioctls.
1352 DRM_PLANE_TYPE_OVERLAY represents all non-primary, non-cursor planes.
1353 Some drivers refer to these types of planes as "sprites" internally.
1356 For compatibility with legacy userspace, only overlay planes are made
1357 available to userspace by default. Userspace clients may set the
1358 DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate that
1359 they wish to receive a universal plane list containing all plane types.
1362 <title>Plane Initialization</title>
1364 To create a plane, a KMS drivers allocates and
1365 zeroes an instances of struct <structname>drm_plane</structname>
1366 (possibly as part of a larger structure) and registers it with a call
1367 to <function>drm_universal_plane_init</function>. The function takes a bitmask
1368 of the CRTCs that can be associated with the plane, a pointer to the
1369 plane functions, a list of format supported formats, and the type of
1370 plane (primary, cursor, or overlay) being initialized.
1373 Cursor and overlay planes are optional. All drivers should provide
1374 one primary plane per CRTC (although this requirement may change in
1375 the future); drivers that do not wish to provide special handling for
1376 primary planes may make use of the helper functions described in
1377 <xref linkend="drm-kms-planehelpers"/> to create and register a
1378 primary plane with standard capabilities.
1382 <title>Plane Operations</title>
1385 <synopsis>int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc,
1386 struct drm_framebuffer *fb, int crtc_x, int crtc_y,
1387 unsigned int crtc_w, unsigned int crtc_h,
1388 uint32_t src_x, uint32_t src_y,
1389 uint32_t src_w, uint32_t src_h);</synopsis>
1391 Enable and configure the plane to use the given CRTC and frame buffer.
1394 The source rectangle in frame buffer memory coordinates is given by
1395 the <parameter>src_x</parameter>, <parameter>src_y</parameter>,
1396 <parameter>src_w</parameter> and <parameter>src_h</parameter>
1397 parameters (as 16.16 fixed point values). Devices that don't support
1398 subpixel plane coordinates can ignore the fractional part.
1401 The destination rectangle in CRTC coordinates is given by the
1402 <parameter>crtc_x</parameter>, <parameter>crtc_y</parameter>,
1403 <parameter>crtc_w</parameter> and <parameter>crtc_h</parameter>
1404 parameters (as integer values). Devices scale the source rectangle to
1405 the destination rectangle. If scaling is not supported, and the source
1406 rectangle size doesn't match the destination rectangle size, the
1407 driver must return a -<errorname>EINVAL</errorname> error.
1411 <synopsis>int (*disable_plane)(struct drm_plane *plane);</synopsis>
1413 Disable the plane. The DRM core calls this method in response to a
1414 DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0.
1415 Disabled planes must not be processed by the CRTC.
1419 <synopsis>void (*destroy)(struct drm_plane *plane);</synopsis>
1421 Destroy the plane when not needed anymore. See
1422 <xref linkend="drm-kms-init"/>.
1429 <title>Encoders (struct <structname>drm_encoder</structname>)</title>
1431 An encoder takes pixel data from a CRTC and converts it to a format
1432 suitable for any attached connectors. On some devices, it may be
1433 possible to have a CRTC send data to more than one encoder. In that
1434 case, both encoders would receive data from the same scanout buffer,
1435 resulting in a "cloned" display configuration across the connectors
1436 attached to each encoder.
1439 <title>Encoder Initialization</title>
1441 As for CRTCs, a KMS driver must create, initialize and register at
1442 least one struct <structname>drm_encoder</structname> instance. The
1443 instance is allocated and zeroed by the driver, possibly as part of a
1447 Drivers must initialize the struct <structname>drm_encoder</structname>
1448 <structfield>possible_crtcs</structfield> and
1449 <structfield>possible_clones</structfield> fields before registering the
1450 encoder. Both fields are bitmasks of respectively the CRTCs that the
1451 encoder can be connected to, and sibling encoders candidate for cloning.
1454 After being initialized, the encoder must be registered with a call to
1455 <function>drm_encoder_init</function>. The function takes a pointer to
1456 the encoder functions and an encoder type. Supported types are
1459 DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A
1462 DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort
1465 DRM_MODE_ENCODER_LVDS for display panels
1468 DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, Component,
1472 DRM_MODE_ENCODER_VIRTUAL for virtual machine displays
1477 Encoders must be attached to a CRTC to be used. DRM drivers leave
1478 encoders unattached at initialization time. Applications (or the fbdev
1479 compatibility layer when implemented) are responsible for attaching the
1480 encoders they want to use to a CRTC.
1484 <title>Encoder Operations</title>
1487 <synopsis>void (*destroy)(struct drm_encoder *encoder);</synopsis>
1489 Called to destroy the encoder when not needed anymore. See
1490 <xref linkend="drm-kms-init"/>.
1494 <synopsis>void (*set_property)(struct drm_plane *plane,
1495 struct drm_property *property, uint64_t value);</synopsis>
1497 Set the value of the given plane property to
1498 <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
1499 for more information about properties.
1506 <title>Connectors (struct <structname>drm_connector</structname>)</title>
1508 A connector is the final destination for pixel data on a device, and
1509 usually connects directly to an external display device like a monitor
1510 or laptop panel. A connector can only be attached to one encoder at a
1511 time. The connector is also the structure where information about the
1512 attached display is kept, so it contains fields for display data, EDID
1513 data, DPMS & connection status, and information about modes
1514 supported on the attached displays.
1517 <title>Connector Initialization</title>
1519 Finally a KMS driver must create, initialize, register and attach at
1520 least one struct <structname>drm_connector</structname> instance. The
1521 instance is created as other KMS objects and initialized by setting the
1526 <term><structfield>interlace_allowed</structfield></term>
1528 Whether the connector can handle interlaced modes.
1532 <term><structfield>doublescan_allowed</structfield></term>
1534 Whether the connector can handle doublescan.
1538 <term><structfield>display_info
1539 </structfield></term>
1541 Display information is filled from EDID information when a display
1542 is detected. For non hot-pluggable displays such as flat panels in
1543 embedded systems, the driver should initialize the
1544 <structfield>display_info</structfield>.<structfield>width_mm</structfield>
1546 <structfield>display_info</structfield>.<structfield>height_mm</structfield>
1547 fields with the physical size of the display.
1551 <term id="drm-kms-connector-polled"><structfield>polled</structfield></term>
1553 Connector polling mode, a combination of
1556 <term>DRM_CONNECTOR_POLL_HPD</term>
1558 The connector generates hotplug events and doesn't need to be
1559 periodically polled. The CONNECT and DISCONNECT flags must not
1560 be set together with the HPD flag.
1564 <term>DRM_CONNECTOR_POLL_CONNECT</term>
1566 Periodically poll the connector for connection.
1570 <term>DRM_CONNECTOR_POLL_DISCONNECT</term>
1572 Periodically poll the connector for disconnection.
1576 Set to 0 for connectors that don't support connection status
1582 The connector is then registered with a call to
1583 <function>drm_connector_init</function> with a pointer to the connector
1584 functions and a connector type, and exposed through sysfs with a call to
1585 <function>drm_sysfs_connector_add</function>.
1588 Supported connector types are
1590 <listitem>DRM_MODE_CONNECTOR_VGA</listitem>
1591 <listitem>DRM_MODE_CONNECTOR_DVII</listitem>
1592 <listitem>DRM_MODE_CONNECTOR_DVID</listitem>
1593 <listitem>DRM_MODE_CONNECTOR_DVIA</listitem>
1594 <listitem>DRM_MODE_CONNECTOR_Composite</listitem>
1595 <listitem>DRM_MODE_CONNECTOR_SVIDEO</listitem>
1596 <listitem>DRM_MODE_CONNECTOR_LVDS</listitem>
1597 <listitem>DRM_MODE_CONNECTOR_Component</listitem>
1598 <listitem>DRM_MODE_CONNECTOR_9PinDIN</listitem>
1599 <listitem>DRM_MODE_CONNECTOR_DisplayPort</listitem>
1600 <listitem>DRM_MODE_CONNECTOR_HDMIA</listitem>
1601 <listitem>DRM_MODE_CONNECTOR_HDMIB</listitem>
1602 <listitem>DRM_MODE_CONNECTOR_TV</listitem>
1603 <listitem>DRM_MODE_CONNECTOR_eDP</listitem>
1604 <listitem>DRM_MODE_CONNECTOR_VIRTUAL</listitem>
1608 Connectors must be attached to an encoder to be used. For devices that
1609 map connectors to encoders 1:1, the connector should be attached at
1610 initialization time with a call to
1611 <function>drm_mode_connector_attach_encoder</function>. The driver must
1612 also set the <structname>drm_connector</structname>
1613 <structfield>encoder</structfield> field to point to the attached
1617 Finally, drivers must initialize the connectors state change detection
1618 with a call to <function>drm_kms_helper_poll_init</function>. If at
1619 least one connector is pollable but can't generate hotplug interrupts
1620 (indicated by the DRM_CONNECTOR_POLL_CONNECT and
1621 DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will
1622 automatically be queued to periodically poll for changes. Connectors
1623 that can generate hotplug interrupts must be marked with the
1624 DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must
1625 call <function>drm_helper_hpd_irq_event</function>. The function will
1626 queue a delayed work to check the state of all connectors, but no
1627 periodic polling will be done.
1631 <title>Connector Operations</title>
1633 Unless otherwise state, all operations are mandatory.
1637 <synopsis>void (*dpms)(struct drm_connector *connector, int mode);</synopsis>
1639 The DPMS operation sets the power state of a connector. The mode
1642 <listitem><para>DRM_MODE_DPMS_ON</para></listitem>
1643 <listitem><para>DRM_MODE_DPMS_STANDBY</para></listitem>
1644 <listitem><para>DRM_MODE_DPMS_SUSPEND</para></listitem>
1645 <listitem><para>DRM_MODE_DPMS_OFF</para></listitem>
1649 In all but DPMS_ON mode the encoder to which the connector is attached
1650 should put the display in low-power mode by driving its signals
1651 appropriately. If more than one connector is attached to the encoder
1652 care should be taken not to change the power state of other displays as
1653 a side effect. Low-power mode should be propagated to the encoders and
1654 CRTCs when all related connectors are put in low-power mode.
1658 <title>Modes</title>
1659 <synopsis>int (*fill_modes)(struct drm_connector *connector, uint32_t max_width,
1660 uint32_t max_height);</synopsis>
1662 Fill the mode list with all supported modes for the connector. If the
1663 <parameter>max_width</parameter> and <parameter>max_height</parameter>
1664 arguments are non-zero, the implementation must ignore all modes wider
1665 than <parameter>max_width</parameter> or higher than
1666 <parameter>max_height</parameter>.
1669 The connector must also fill in this operation its
1670 <structfield>display_info</structfield>
1671 <structfield>width_mm</structfield> and
1672 <structfield>height_mm</structfield> fields with the connected display
1673 physical size in millimeters. The fields should be set to 0 if the value
1674 isn't known or is not applicable (for instance for projector devices).
1678 <title>Connection Status</title>
1680 The connection status is updated through polling or hotplug events when
1681 supported (see <xref linkend="drm-kms-connector-polled"/>). The status
1682 value is reported to userspace through ioctls and must not be used
1683 inside the driver, as it only gets initialized by a call to
1684 <function>drm_mode_getconnector</function> from userspace.
1686 <synopsis>enum drm_connector_status (*detect)(struct drm_connector *connector,
1687 bool force);</synopsis>
1689 Check to see if anything is attached to the connector. The
1690 <parameter>force</parameter> parameter is set to false whilst polling or
1691 to true when checking the connector due to user request.
1692 <parameter>force</parameter> can be used by the driver to avoid
1693 expensive, destructive operations during automated probing.
1696 Return connector_status_connected if something is connected to the
1697 connector, connector_status_disconnected if nothing is connected and
1698 connector_status_unknown if the connection state isn't known.
1701 Drivers should only return connector_status_connected if the connection
1702 status has really been probed as connected. Connectors that can't detect
1703 the connection status, or failed connection status probes, should return
1704 connector_status_unknown.
1708 <title>Miscellaneous</title>
1711 <synopsis>void (*set_property)(struct drm_connector *connector,
1712 struct drm_property *property, uint64_t value);</synopsis>
1714 Set the value of the given connector property to
1715 <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
1716 for more information about properties.
1720 <synopsis>void (*destroy)(struct drm_connector *connector);</synopsis>
1722 Destroy the connector when not needed anymore. See
1723 <xref linkend="drm-kms-init"/>.
1731 <title>Cleanup</title>
1733 The DRM core manages its objects' lifetime. When an object is not needed
1734 anymore the core calls its destroy function, which must clean up and
1735 free every resource allocated for the object. Every
1736 <function>drm_*_init</function> call must be matched with a
1737 corresponding <function>drm_*_cleanup</function> call to cleanup CRTCs
1738 (<function>drm_crtc_cleanup</function>), planes
1739 (<function>drm_plane_cleanup</function>), encoders
1740 (<function>drm_encoder_cleanup</function>) and connectors
1741 (<function>drm_connector_cleanup</function>). Furthermore, connectors
1742 that have been added to sysfs must be removed by a call to
1743 <function>drm_sysfs_connector_remove</function> before calling
1744 <function>drm_connector_cleanup</function>.
1747 Connectors state change detection must be cleanup up with a call to
1748 <function>drm_kms_helper_poll_fini</function>.
1752 <title>Output discovery and initialization example</title>
1753 <programlisting><![CDATA[
1754 void intel_crt_init(struct drm_device *dev)
1756 struct drm_connector *connector;
1757 struct intel_output *intel_output;
1759 intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
1763 connector = &intel_output->base;
1764 drm_connector_init(dev, &intel_output->base,
1765 &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
1767 drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
1768 DRM_MODE_ENCODER_DAC);
1770 drm_mode_connector_attach_encoder(&intel_output->base,
1771 &intel_output->enc);
1773 /* Set up the DDC bus. */
1774 intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
1775 if (!intel_output->ddc_bus) {
1776 dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
1781 intel_output->type = INTEL_OUTPUT_ANALOG;
1782 connector->interlace_allowed = 0;
1783 connector->doublescan_allowed = 0;
1785 drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
1786 drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
1788 drm_sysfs_connector_add(connector);
1789 }]]></programlisting>
1791 In the example above (taken from the i915 driver), a CRTC, connector and
1792 encoder combination is created. A device-specific i2c bus is also
1793 created for fetching EDID data and performing monitor detection. Once
1794 the process is complete, the new connector is registered with sysfs to
1795 make its properties available to applications.
1799 <title>KMS API Functions</title>
1800 !Edrivers/gpu/drm/drm_crtc.c
1804 <!-- Internals: kms helper functions -->
1807 <title>Mode Setting Helper Functions</title>
1809 The plane, CRTC, encoder and connector functions provided by the drivers
1810 implement the DRM API. They're called by the DRM core and ioctl handlers
1811 to handle device state changes and configuration request. As implementing
1812 those functions often requires logic not specific to drivers, mid-layer
1813 helper functions are available to avoid duplicating boilerplate code.
1816 The DRM core contains one mid-layer implementation. The mid-layer provides
1817 implementations of several plane, CRTC, encoder and connector functions
1818 (called from the top of the mid-layer) that pre-process requests and call
1819 lower-level functions provided by the driver (at the bottom of the
1820 mid-layer). For instance, the
1821 <function>drm_crtc_helper_set_config</function> function can be used to
1822 fill the struct <structname>drm_crtc_funcs</structname>
1823 <structfield>set_config</structfield> field. When called, it will split
1824 the <methodname>set_config</methodname> operation in smaller, simpler
1825 operations and call the driver to handle them.
1828 To use the mid-layer, drivers call <function>drm_crtc_helper_add</function>,
1829 <function>drm_encoder_helper_add</function> and
1830 <function>drm_connector_helper_add</function> functions to install their
1831 mid-layer bottom operations handlers, and fill the
1832 <structname>drm_crtc_funcs</structname>,
1833 <structname>drm_encoder_funcs</structname> and
1834 <structname>drm_connector_funcs</structname> structures with pointers to
1835 the mid-layer top API functions. Installing the mid-layer bottom operation
1836 handlers is best done right after registering the corresponding KMS object.
1839 The mid-layer is not split between CRTC, encoder and connector operations.
1840 To use it, a driver must provide bottom functions for all of the three KMS
1844 <title>Helper Functions</title>
1847 <synopsis>int drm_crtc_helper_set_config(struct drm_mode_set *set);</synopsis>
1849 The <function>drm_crtc_helper_set_config</function> helper function
1850 is a CRTC <methodname>set_config</methodname> implementation. It
1851 first tries to locate the best encoder for each connector by calling
1852 the connector <methodname>best_encoder</methodname> helper
1856 After locating the appropriate encoders, the helper function will
1857 call the <methodname>mode_fixup</methodname> encoder and CRTC helper
1858 operations to adjust the requested mode, or reject it completely in
1859 which case an error will be returned to the application. If the new
1860 configuration after mode adjustment is identical to the current
1861 configuration the helper function will return without performing any
1865 If the adjusted mode is identical to the current mode but changes to
1866 the frame buffer need to be applied, the
1867 <function>drm_crtc_helper_set_config</function> function will call
1868 the CRTC <methodname>mode_set_base</methodname> helper operation. If
1869 the adjusted mode differs from the current mode, or if the
1870 <methodname>mode_set_base</methodname> helper operation is not
1871 provided, the helper function performs a full mode set sequence by
1872 calling the <methodname>prepare</methodname>,
1873 <methodname>mode_set</methodname> and
1874 <methodname>commit</methodname> CRTC and encoder helper operations,
1879 <synopsis>void drm_helper_connector_dpms(struct drm_connector *connector, int mode);</synopsis>
1881 The <function>drm_helper_connector_dpms</function> helper function
1882 is a connector <methodname>dpms</methodname> implementation that
1883 tracks power state of connectors. To use the function, drivers must
1884 provide <methodname>dpms</methodname> helper operations for CRTCs
1885 and encoders to apply the DPMS state to the device.
1888 The mid-layer doesn't track the power state of CRTCs and encoders.
1889 The <methodname>dpms</methodname> helper operations can thus be
1890 called with a mode identical to the currently active mode.
1894 <synopsis>int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
1895 uint32_t maxX, uint32_t maxY);</synopsis>
1897 The <function>drm_helper_probe_single_connector_modes</function> helper
1898 function is a connector <methodname>fill_modes</methodname>
1899 implementation that updates the connection status for the connector
1900 and then retrieves a list of modes by calling the connector
1901 <methodname>get_modes</methodname> helper operation.
1904 The function filters out modes larger than
1905 <parameter>max_width</parameter> and <parameter>max_height</parameter>
1906 if specified. It then calls the connector
1907 <methodname>mode_valid</methodname> helper operation for each mode in
1908 the probed list to check whether the mode is valid for the connector.
1914 <title>CRTC Helper Operations</title>
1916 <listitem id="drm-helper-crtc-mode-fixup">
1917 <synopsis>bool (*mode_fixup)(struct drm_crtc *crtc,
1918 const struct drm_display_mode *mode,
1919 struct drm_display_mode *adjusted_mode);</synopsis>
1921 Let CRTCs adjust the requested mode or reject it completely. This
1922 operation returns true if the mode is accepted (possibly after being
1923 adjusted) or false if it is rejected.
1926 The <methodname>mode_fixup</methodname> operation should reject the
1927 mode if it can't reasonably use it. The definition of "reasonable"
1928 is currently fuzzy in this context. One possible behaviour would be
1929 to set the adjusted mode to the panel timings when a fixed-mode
1930 panel is used with hardware capable of scaling. Another behaviour
1931 would be to accept any input mode and adjust it to the closest mode
1932 supported by the hardware (FIXME: This needs to be clarified).
1936 <synopsis>int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
1937 struct drm_framebuffer *old_fb)</synopsis>
1939 Move the CRTC on the current frame buffer (stored in
1940 <literal>crtc->fb</literal>) to position (x,y). Any of the frame
1941 buffer, x position or y position may have been modified.
1944 This helper operation is optional. If not provided, the
1945 <function>drm_crtc_helper_set_config</function> function will fall
1946 back to the <methodname>mode_set</methodname> helper operation.
1949 FIXME: Why are x and y passed as arguments, as they can be accessed
1950 through <literal>crtc->x</literal> and
1951 <literal>crtc->y</literal>?
1955 <synopsis>void (*prepare)(struct drm_crtc *crtc);</synopsis>
1957 Prepare the CRTC for mode setting. This operation is called after
1958 validating the requested mode. Drivers use it to perform
1959 device-specific operations required before setting the new mode.
1963 <synopsis>int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
1964 struct drm_display_mode *adjusted_mode, int x, int y,
1965 struct drm_framebuffer *old_fb);</synopsis>
1967 Set a new mode, position and frame buffer. Depending on the device
1968 requirements, the mode can be stored internally by the driver and
1969 applied in the <methodname>commit</methodname> operation, or
1970 programmed to the hardware immediately.
1973 The <methodname>mode_set</methodname> operation returns 0 on success
1974 or a negative error code if an error occurs.
1978 <synopsis>void (*commit)(struct drm_crtc *crtc);</synopsis>
1980 Commit a mode. This operation is called after setting the new mode.
1981 Upon return the device must use the new mode and be fully
1988 <title>Encoder Helper Operations</title>
1991 <synopsis>bool (*mode_fixup)(struct drm_encoder *encoder,
1992 const struct drm_display_mode *mode,
1993 struct drm_display_mode *adjusted_mode);</synopsis>
1995 Let encoders adjust the requested mode or reject it completely. This
1996 operation returns true if the mode is accepted (possibly after being
1997 adjusted) or false if it is rejected. See the
1998 <link linkend="drm-helper-crtc-mode-fixup">mode_fixup CRTC helper
1999 operation</link> for an explanation of the allowed adjustments.
2003 <synopsis>void (*prepare)(struct drm_encoder *encoder);</synopsis>
2005 Prepare the encoder for mode setting. This operation is called after
2006 validating the requested mode. Drivers use it to perform
2007 device-specific operations required before setting the new mode.
2011 <synopsis>void (*mode_set)(struct drm_encoder *encoder,
2012 struct drm_display_mode *mode,
2013 struct drm_display_mode *adjusted_mode);</synopsis>
2015 Set a new mode. Depending on the device requirements, the mode can
2016 be stored internally by the driver and applied in the
2017 <methodname>commit</methodname> operation, or programmed to the
2018 hardware immediately.
2022 <synopsis>void (*commit)(struct drm_encoder *encoder);</synopsis>
2024 Commit a mode. This operation is called after setting the new mode.
2025 Upon return the device must use the new mode and be fully
2032 <title>Connector Helper Operations</title>
2035 <synopsis>struct drm_encoder *(*best_encoder)(struct drm_connector *connector);</synopsis>
2037 Return a pointer to the best encoder for the connecter. Device that
2038 map connectors to encoders 1:1 simply return the pointer to the
2039 associated encoder. This operation is mandatory.
2043 <synopsis>int (*get_modes)(struct drm_connector *connector);</synopsis>
2045 Fill the connector's <structfield>probed_modes</structfield> list
2046 by parsing EDID data with <function>drm_add_edid_modes</function> or
2047 calling <function>drm_mode_probed_add</function> directly for every
2048 supported mode and return the number of modes it has detected. This
2049 operation is mandatory.
2052 When adding modes manually the driver creates each mode with a call to
2053 <function>drm_mode_create</function> and must fill the following fields.
2056 <synopsis>__u32 type;</synopsis>
2058 Mode type bitmask, a combination of
2061 <term>DRM_MODE_TYPE_BUILTIN</term>
2062 <listitem><para>not used?</para></listitem>
2065 <term>DRM_MODE_TYPE_CLOCK_C</term>
2066 <listitem><para>not used?</para></listitem>
2069 <term>DRM_MODE_TYPE_CRTC_C</term>
2070 <listitem><para>not used?</para></listitem>
2074 DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector
2077 <para>not used?</para>
2081 <term>DRM_MODE_TYPE_DEFAULT</term>
2082 <listitem><para>not used?</para></listitem>
2085 <term>DRM_MODE_TYPE_USERDEF</term>
2086 <listitem><para>not used?</para></listitem>
2089 <term>DRM_MODE_TYPE_DRIVER</term>
2092 The mode has been created by the driver (as opposed to
2093 to user-created modes).
2098 Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they
2099 create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred
2104 <synopsis>__u32 clock;</synopsis>
2105 <para>Pixel clock frequency in kHz unit</para>
2108 <synopsis>__u16 hdisplay, hsync_start, hsync_end, htotal;
2109 __u16 vdisplay, vsync_start, vsync_end, vtotal;</synopsis>
2110 <para>Horizontal and vertical timing information</para>
2112 Active Front Sync Back
2114 <-----------------------><----------------><-------------><-------------->
2116 //////////////////////|
2117 ////////////////////// |
2118 ////////////////////// |.................. ................
2121 <----- [hv]display ----->
2122 <------------- [hv]sync_start ------------>
2123 <--------------------- [hv]sync_end --------------------->
2124 <-------------------------------- [hv]total ----------------------------->
2128 <synopsis>__u16 hskew;
2129 __u16 vscan;</synopsis>
2130 <para>Unknown</para>
2133 <synopsis>__u32 flags;</synopsis>
2135 Mode flags, a combination of
2138 <term>DRM_MODE_FLAG_PHSYNC</term>
2140 Horizontal sync is active high
2144 <term>DRM_MODE_FLAG_NHSYNC</term>
2146 Horizontal sync is active low
2150 <term>DRM_MODE_FLAG_PVSYNC</term>
2152 Vertical sync is active high
2156 <term>DRM_MODE_FLAG_NVSYNC</term>
2158 Vertical sync is active low
2162 <term>DRM_MODE_FLAG_INTERLACE</term>
2168 <term>DRM_MODE_FLAG_DBLSCAN</term>
2170 Mode uses doublescan
2174 <term>DRM_MODE_FLAG_CSYNC</term>
2176 Mode uses composite sync
2180 <term>DRM_MODE_FLAG_PCSYNC</term>
2182 Composite sync is active high
2186 <term>DRM_MODE_FLAG_NCSYNC</term>
2188 Composite sync is active low
2192 <term>DRM_MODE_FLAG_HSKEW</term>
2194 hskew provided (not used?)
2198 <term>DRM_MODE_FLAG_BCAST</term>
2204 <term>DRM_MODE_FLAG_PIXMUX</term>
2210 <term>DRM_MODE_FLAG_DBLCLK</term>
2216 <term>DRM_MODE_FLAG_CLKDIV2</term>
2224 Note that modes marked with the INTERLACE or DBLSCAN flags will be
2226 <function>drm_helper_probe_single_connector_modes</function> if
2227 the connector's <structfield>interlace_allowed</structfield> or
2228 <structfield>doublescan_allowed</structfield> field is set to 0.
2232 <synopsis>char name[DRM_DISPLAY_MODE_LEN];</synopsis>
2234 Mode name. The driver must call
2235 <function>drm_mode_set_name</function> to fill the mode name from
2236 <structfield>hdisplay</structfield>,
2237 <structfield>vdisplay</structfield> and interlace flag after
2238 filling the corresponding fields.
2244 The <structfield>vrefresh</structfield> value is computed by
2245 <function>drm_helper_probe_single_connector_modes</function>.
2248 When parsing EDID data, <function>drm_add_edid_modes</function> fill the
2249 connector <structfield>display_info</structfield>
2250 <structfield>width_mm</structfield> and
2251 <structfield>height_mm</structfield> fields. When creating modes
2252 manually the <methodname>get_modes</methodname> helper operation must
2253 set the <structfield>display_info</structfield>
2254 <structfield>width_mm</structfield> and
2255 <structfield>height_mm</structfield> fields if they haven't been set
2256 already (for instance at initialization time when a fixed-size panel is
2257 attached to the connector). The mode <structfield>width_mm</structfield>
2258 and <structfield>height_mm</structfield> fields are only used internally
2259 during EDID parsing and should not be set when creating modes manually.
2263 <synopsis>int (*mode_valid)(struct drm_connector *connector,
2264 struct drm_display_mode *mode);</synopsis>
2266 Verify whether a mode is valid for the connector. Return MODE_OK for
2267 supported modes and one of the enum drm_mode_status values (MODE_*)
2268 for unsupported modes. This operation is mandatory.
2271 As the mode rejection reason is currently not used beside for
2272 immediately removing the unsupported mode, an implementation can
2273 return MODE_BAD regardless of the exact reason why the mode is not
2277 Note that the <methodname>mode_valid</methodname> helper operation is
2278 only called for modes detected by the device, and
2279 <emphasis>not</emphasis> for modes set by the user through the CRTC
2280 <methodname>set_config</methodname> operation.
2286 <title>Modeset Helper Functions Reference</title>
2287 !Edrivers/gpu/drm/drm_crtc_helper.c
2290 <title>Output Probing Helper Functions Reference</title>
2291 !Pdrivers/gpu/drm/drm_probe_helper.c output probing helper overview
2292 !Edrivers/gpu/drm/drm_probe_helper.c
2295 <title>fbdev Helper Functions Reference</title>
2296 !Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers
2297 !Edrivers/gpu/drm/drm_fb_helper.c
2298 !Iinclude/drm/drm_fb_helper.h
2301 <title>Display Port Helper Functions Reference</title>
2302 !Pdrivers/gpu/drm/drm_dp_helper.c dp helpers
2303 !Iinclude/drm/drm_dp_helper.h
2304 !Edrivers/gpu/drm/drm_dp_helper.c
2307 <title>EDID Helper Functions Reference</title>
2308 !Edrivers/gpu/drm/drm_edid.c
2311 <title>Rectangle Utilities Reference</title>
2312 !Pinclude/drm/drm_rect.h rect utils
2313 !Iinclude/drm/drm_rect.h
2314 !Edrivers/gpu/drm/drm_rect.c
2317 <title>Flip-work Helper Reference</title>
2318 !Pinclude/drm/drm_flip_work.h flip utils
2319 !Iinclude/drm/drm_flip_work.h
2320 !Edrivers/gpu/drm/drm_flip_work.c
2323 <title>HDMI Infoframes Helper Reference</title>
2325 Strictly speaking this is not a DRM helper library but generally useable
2326 by any driver interfacing with HDMI outputs like v4l or alsa drivers.
2327 But it nicely fits into the overall topic of mode setting helper
2328 libraries and hence is also included here.
2330 !Iinclude/linux/hdmi.h
2331 !Edrivers/video/hdmi.c
2334 <title id="drm-kms-planehelpers">Plane Helper Reference</title>
2335 !Edrivers/gpu/drm/drm_plane_helper.c Plane Helpers
2339 <!-- Internals: kms properties -->
2341 <sect1 id="drm-kms-properties">
2342 <title>KMS Properties</title>
2344 Drivers may need to expose additional parameters to applications than
2345 those described in the previous sections. KMS supports attaching
2346 properties to CRTCs, connectors and planes and offers a userspace API to
2347 list, get and set the property values.
2350 Properties are identified by a name that uniquely defines the property
2351 purpose, and store an associated value. For all property types except blob
2352 properties the value is a 64-bit unsigned integer.
2355 KMS differentiates between properties and property instances. Drivers
2356 first create properties and then create and associate individual instances
2357 of those properties to objects. A property can be instantiated multiple
2358 times and associated with different objects. Values are stored in property
2359 instances, and all other property information are stored in the propery
2360 and shared between all instances of the property.
2363 Every property is created with a type that influences how the KMS core
2364 handles the property. Supported property types are
2367 <term>DRM_MODE_PROP_RANGE</term>
2368 <listitem><para>Range properties report their minimum and maximum
2369 admissible values. The KMS core verifies that values set by
2370 application fit in that range.</para></listitem>
2373 <term>DRM_MODE_PROP_ENUM</term>
2374 <listitem><para>Enumerated properties take a numerical value that
2375 ranges from 0 to the number of enumerated values defined by the
2376 property minus one, and associate a free-formed string name to each
2377 value. Applications can retrieve the list of defined value-name pairs
2378 and use the numerical value to get and set property instance values.
2382 <term>DRM_MODE_PROP_BITMASK</term>
2383 <listitem><para>Bitmask properties are enumeration properties that
2384 additionally restrict all enumerated values to the 0..63 range.
2385 Bitmask property instance values combine one or more of the
2386 enumerated bits defined by the property.</para></listitem>
2389 <term>DRM_MODE_PROP_BLOB</term>
2390 <listitem><para>Blob properties store a binary blob without any format
2391 restriction. The binary blobs are created as KMS standalone objects,
2392 and blob property instance values store the ID of their associated
2394 <para>Blob properties are only used for the connector EDID property
2395 and cannot be created by drivers.</para></listitem>
2400 To create a property drivers call one of the following functions depending
2401 on the property type. All property creation functions take property flags
2402 and name, as well as type-specific arguments.
2405 <synopsis>struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
2407 uint64_t min, uint64_t max);</synopsis>
2408 <para>Create a range property with the given minimum and maximum
2412 <synopsis>struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags,
2414 const struct drm_prop_enum_list *props,
2415 int num_values);</synopsis>
2416 <para>Create an enumerated property. The <parameter>props</parameter>
2417 argument points to an array of <parameter>num_values</parameter>
2418 value-name pairs.</para>
2421 <synopsis>struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
2422 int flags, const char *name,
2423 const struct drm_prop_enum_list *props,
2424 int num_values);</synopsis>
2425 <para>Create a bitmask property. The <parameter>props</parameter>
2426 argument points to an array of <parameter>num_values</parameter>
2427 value-name pairs.</para>
2432 Properties can additionally be created as immutable, in which case they
2433 will be read-only for applications but can be modified by the driver. To
2434 create an immutable property drivers must set the DRM_MODE_PROP_IMMUTABLE
2435 flag at property creation time.
2438 When no array of value-name pairs is readily available at property
2439 creation time for enumerated or range properties, drivers can create
2440 the property using the <function>drm_property_create</function> function
2441 and manually add enumeration value-name pairs by calling the
2442 <function>drm_property_add_enum</function> function. Care must be taken to
2443 properly specify the property type through the <parameter>flags</parameter>
2447 After creating properties drivers can attach property instances to CRTC,
2448 connector and plane objects by calling the
2449 <function>drm_object_attach_property</function>. The function takes a
2450 pointer to the target object, a pointer to the previously created property
2451 and an initial instance value.
2455 <!-- Internals: vertical blanking -->
2457 <sect1 id="drm-vertical-blank">
2458 <title>Vertical Blanking</title>
2460 Vertical blanking plays a major role in graphics rendering. To achieve
2461 tear-free display, users must synchronize page flips and/or rendering to
2462 vertical blanking. The DRM API offers ioctls to perform page flips
2463 synchronized to vertical blanking and wait for vertical blanking.
2466 The DRM core handles most of the vertical blanking management logic, which
2467 involves filtering out spurious interrupts, keeping race-free blanking
2468 counters, coping with counter wrap-around and resets and keeping use
2469 counts. It relies on the driver to generate vertical blanking interrupts
2470 and optionally provide a hardware vertical blanking counter. Drivers must
2471 implement the following operations.
2475 <synopsis>int (*enable_vblank) (struct drm_device *dev, int crtc);
2476 void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis>
2478 Enable or disable vertical blanking interrupts for the given CRTC.
2482 <synopsis>u32 (*get_vblank_counter) (struct drm_device *dev, int crtc);</synopsis>
2484 Retrieve the value of the vertical blanking counter for the given
2485 CRTC. If the hardware maintains a vertical blanking counter its value
2486 should be returned. Otherwise drivers can use the
2487 <function>drm_vblank_count</function> helper function to handle this
2493 Drivers must initialize the vertical blanking handling core with a call to
2494 <function>drm_vblank_init</function> in their
2495 <methodname>load</methodname> operation. The function will set the struct
2496 <structname>drm_device</structname>
2497 <structfield>vblank_disable_allowed</structfield> field to 0. This will
2498 keep vertical blanking interrupts enabled permanently until the first mode
2499 set operation, where <structfield>vblank_disable_allowed</structfield> is
2500 set to 1. The reason behind this is not clear. Drivers can set the field
2501 to 1 after <function>calling drm_vblank_init</function> to make vertical
2502 blanking interrupts dynamically managed from the beginning.
2505 Vertical blanking interrupts can be enabled by the DRM core or by drivers
2506 themselves (for instance to handle page flipping operations). The DRM core
2507 maintains a vertical blanking use count to ensure that the interrupts are
2508 not disabled while a user still needs them. To increment the use count,
2509 drivers call <function>drm_vblank_get</function>. Upon return vertical
2510 blanking interrupts are guaranteed to be enabled.
2513 To decrement the use count drivers call
2514 <function>drm_vblank_put</function>. Only when the use count drops to zero
2515 will the DRM core disable the vertical blanking interrupts after a delay
2516 by scheduling a timer. The delay is accessible through the vblankoffdelay
2517 module parameter or the <varname>drm_vblank_offdelay</varname> global
2518 variable and expressed in milliseconds. Its default value is 5000 ms.
2521 When a vertical blanking interrupt occurs drivers only need to call the
2522 <function>drm_handle_vblank</function> function to account for the
2526 Resources allocated by <function>drm_vblank_init</function> must be freed
2527 with a call to <function>drm_vblank_cleanup</function> in the driver
2528 <methodname>unload</methodname> operation handler.
2532 <!-- Internals: open/close, file operations and ioctls -->
2535 <title>Open/Close, File Operations and IOCTLs</title>
2537 <title>Open and Close</title>
2538 <synopsis>int (*firstopen) (struct drm_device *);
2539 void (*lastclose) (struct drm_device *);
2540 int (*open) (struct drm_device *, struct drm_file *);
2541 void (*preclose) (struct drm_device *, struct drm_file *);
2542 void (*postclose) (struct drm_device *, struct drm_file *);</synopsis>
2543 <abstract>Open and close handlers. None of those methods are mandatory.
2546 The <methodname>firstopen</methodname> method is called by the DRM core
2547 for legacy UMS (User Mode Setting) drivers only when an application
2548 opens a device that has no other opened file handle. UMS drivers can
2549 implement it to acquire device resources. KMS drivers can't use the
2550 method and must acquire resources in the <methodname>load</methodname>
2554 Similarly the <methodname>lastclose</methodname> method is called when
2555 the last application holding a file handle opened on the device closes
2556 it, for both UMS and KMS drivers. Additionally, the method is also
2557 called at module unload time or, for hot-pluggable devices, when the
2558 device is unplugged. The <methodname>firstopen</methodname> and
2559 <methodname>lastclose</methodname> calls can thus be unbalanced.
2562 The <methodname>open</methodname> method is called every time the device
2563 is opened by an application. Drivers can allocate per-file private data
2564 in this method and store them in the struct
2565 <structname>drm_file</structname> <structfield>driver_priv</structfield>
2566 field. Note that the <methodname>open</methodname> method is called
2567 before <methodname>firstopen</methodname>.
2570 The close operation is split into <methodname>preclose</methodname> and
2571 <methodname>postclose</methodname> methods. Drivers must stop and
2572 cleanup all per-file operations in the <methodname>preclose</methodname>
2573 method. For instance pending vertical blanking and page flip events must
2574 be cancelled. No per-file operation is allowed on the file handle after
2575 returning from the <methodname>preclose</methodname> method.
2578 Finally the <methodname>postclose</methodname> method is called as the
2579 last step of the close operation, right before calling the
2580 <methodname>lastclose</methodname> method if no other open file handle
2581 exists for the device. Drivers that have allocated per-file private data
2582 in the <methodname>open</methodname> method should free it here.
2585 The <methodname>lastclose</methodname> method should restore CRTC and
2586 plane properties to default value, so that a subsequent open of the
2587 device will not inherit state from the previous user. It can also be
2588 used to execute delayed power switching state changes, e.g. in
2589 conjunction with the vga-switcheroo infrastructure. Beyond that KMS
2590 drivers should not do any further cleanup. Only legacy UMS drivers might
2591 need to clean up device state so that the vga console or an independent
2592 fbdev driver could take over.
2596 <title>File Operations</title>
2597 <synopsis>const struct file_operations *fops</synopsis>
2598 <abstract>File operations for the DRM device node.</abstract>
2600 Drivers must define the file operations structure that forms the DRM
2601 userspace API entry point, even though most of those operations are
2602 implemented in the DRM core. The <methodname>open</methodname>,
2603 <methodname>release</methodname> and <methodname>ioctl</methodname>
2604 operations are handled by
2606 .owner = THIS_MODULE,
2608 .release = drm_release,
2609 .unlocked_ioctl = drm_ioctl,
2610 #ifdef CONFIG_COMPAT
2611 .compat_ioctl = drm_compat_ioctl,
2616 Drivers that implement private ioctls that requires 32/64bit
2617 compatibility support must provide their own
2618 <methodname>compat_ioctl</methodname> handler that processes private
2619 ioctls and calls <function>drm_compat_ioctl</function> for core ioctls.
2622 The <methodname>read</methodname> and <methodname>poll</methodname>
2623 operations provide support for reading DRM events and polling them. They
2628 .llseek = no_llseek,
2632 The memory mapping implementation varies depending on how the driver
2633 manages memory. Pre-GEM drivers will use <function>drm_mmap</function>,
2634 while GEM-aware drivers will use <function>drm_gem_mmap</function>. See
2635 <xref linkend="drm-gem"/>.
2637 .mmap = drm_gem_mmap,
2641 No other file operation is supported by the DRM API.
2645 <title>IOCTLs</title>
2646 <synopsis>struct drm_ioctl_desc *ioctls;
2647 int num_ioctls;</synopsis>
2648 <abstract>Driver-specific ioctls descriptors table.</abstract>
2650 Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls
2651 descriptors table is indexed by the ioctl number offset from the base
2652 value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize the
2656 <programlisting>DRM_IOCTL_DEF_DRV(ioctl, func, flags)</programlisting>
2658 <parameter>ioctl</parameter> is the ioctl name. Drivers must define
2659 the DRM_##ioctl and DRM_IOCTL_##ioctl macros to the ioctl number
2660 offset from DRM_COMMAND_BASE and the ioctl number respectively. The
2661 first macro is private to the device while the second must be exposed
2662 to userspace in a public header.
2665 <parameter>func</parameter> is a pointer to the ioctl handler function
2666 compatible with the <type>drm_ioctl_t</type> type.
2667 <programlisting>typedef int drm_ioctl_t(struct drm_device *dev, void *data,
2668 struct drm_file *file_priv);</programlisting>
2671 <parameter>flags</parameter> is a bitmask combination of the following
2672 values. It restricts how the ioctl is allowed to be called.
2675 DRM_AUTH - Only authenticated callers allowed
2678 DRM_MASTER - The ioctl can only be called on the master file
2682 DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed
2685 DRM_CONTROL_ALLOW - The ioctl can only be called on a control
2689 DRM_UNLOCKED - The ioctl handler will be called without locking
2690 the DRM global mutex
2698 <title>Legacy Support Code</title>
2700 The section very brievely covers some of the old legacy support code which
2701 is only used by old DRM drivers which have done a so-called shadow-attach
2702 to the underlying device instead of registering as a real driver. This
2703 also includes some of the old generic buffer mangement and command
2704 submission code. Do not use any of this in new and modern drivers.
2708 <title>Legacy Suspend/Resume</title>
2710 The DRM core provides some suspend/resume code, but drivers wanting full
2711 suspend/resume support should provide save() and restore() functions.
2712 These are called at suspend, hibernate, or resume time, and should perform
2713 any state save or restore required by your device across suspend or
2716 <synopsis>int (*suspend) (struct drm_device *, pm_message_t state);
2717 int (*resume) (struct drm_device *);</synopsis>
2719 Those are legacy suspend and resume methods which
2720 <emphasis>only</emphasis> work with the legacy shadow-attach driver
2721 registration functions. New driver should use the power management
2722 interface provided by their bus type (usually through
2723 the struct <structname>device_driver</structname> dev_pm_ops) and set
2724 these methods to NULL.
2729 <title>Legacy DMA Services</title>
2731 This should cover how DMA mapping etc. is supported by the core.
2732 These functions are deprecated and should not be used.
2741 - Document the struct_mutex catch-all lock
2742 - Document connector properties
2744 - Why is the load method optional?
2745 - What are drivers supposed to set the initial display state to, and how?
2746 Connector's DPMS states are not initialized and are thus equal to
2747 DRM_MODE_DPMS_ON. The fbcon compatibility layer calls
2748 drm_helper_disable_unused_functions(), which disables unused encoders and
2749 CRTCs, but doesn't touch the connectors' DPMS state, and
2750 drm_helper_connector_dpms() in reaction to fbdev blanking events. Do drivers
2751 that don't implement (or just don't use) fbcon compatibility need to call
2752 those functions themselves?
2753 - KMS drivers must call drm_vblank_pre_modeset() and drm_vblank_post_modeset()
2754 around mode setting. Should this be done in the DRM core?
2755 - vblank_disable_allowed is set to 1 in the first drm_vblank_post_modeset()
2756 call and never set back to 0. It seems to be safe to permanently set it to 1
2757 in drm_vblank_init() for KMS driver, and it might be safe for UMS drivers as
2758 well. This should be investigated.
2759 - crtc and connector .save and .restore operations are only used internally in
2760 drivers, should they be removed from the core?
2761 - encoder mid-layer .save and .restore operations are only used internally in
2762 drivers, should they be removed from the core?
2763 - encoder mid-layer .detect operation is only used internally in drivers,
2764 should it be removed from the core?
2767 <!-- External interfaces -->
2769 <chapter id="drmExternals">
2770 <title>Userland interfaces</title>
2772 The DRM core exports several interfaces to applications,
2773 generally intended to be used through corresponding libdrm
2774 wrapper functions. In addition, drivers export device-specific
2775 interfaces for use by userspace drivers & device-aware
2776 applications through ioctls and sysfs files.
2779 External interfaces include: memory mapping, context management,
2780 DMA operations, AGP management, vblank control, fence
2781 management, memory management, and output management.
2784 Cover generic ioctls and sysfs layout here. We only need high-level
2785 info, since man pages should cover the rest.
2788 <!-- External: render nodes -->
2791 <title>Render nodes</title>
2793 DRM core provides multiple character-devices for user-space to use.
2794 Depending on which device is opened, user-space can perform a different
2795 set of operations (mainly ioctls). The primary node is always created
2796 and called card<num>. Additionally, a currently
2797 unused control node, called controlD<num> is also
2798 created. The primary node provides all legacy operations and
2799 historically was the only interface used by userspace. With KMS, the
2800 control node was introduced. However, the planned KMS control interface
2801 has never been written and so the control node stays unused to date.
2804 With the increased use of offscreen renderers and GPGPU applications,
2805 clients no longer require running compositors or graphics servers to
2806 make use of a GPU. But the DRM API required unprivileged clients to
2807 authenticate to a DRM-Master prior to getting GPU access. To avoid this
2808 step and to grant clients GPU access without authenticating, render
2809 nodes were introduced. Render nodes solely serve render clients, that
2810 is, no modesetting or privileged ioctls can be issued on render nodes.
2811 Only non-global rendering commands are allowed. If a driver supports
2812 render nodes, it must advertise it via the DRIVER_RENDER
2813 DRM driver capability. If not supported, the primary node must be used
2814 for render clients together with the legacy drmAuth authentication
2818 If a driver advertises render node support, DRM core will create a
2819 separate render node called renderD<num>. There will
2820 be one render node per device. No ioctls except PRIME-related ioctls
2821 will be allowed on this node. Especially GEM_OPEN will be
2822 explicitly prohibited. Render nodes are designed to avoid the
2823 buffer-leaks, which occur if clients guess the flink names or mmap
2824 offsets on the legacy interface. Additionally to this basic interface,
2825 drivers must mark their driver-dependent render-only ioctls as
2826 DRM_RENDER_ALLOW so render clients can use them. Driver
2827 authors must be careful not to allow any privileged ioctls on render
2831 With render nodes, user-space can now control access to the render node
2832 via basic file-system access-modes. A running graphics server which
2833 authenticates clients on the privileged primary/legacy node is no longer
2834 required. Instead, a client can open the render node and is immediately
2835 granted GPU access. Communication between clients (or servers) is done
2836 via PRIME. FLINK from render node to legacy node is not supported. New
2837 clients must not use the insecure FLINK interface.
2840 Besides dropping all modeset/global ioctls, render nodes also drop the
2841 DRM-Master concept. There is no reason to associate render clients with
2842 a DRM-Master as they are independent of any graphics server. Besides,
2843 they must work without any running master, anyway.
2844 Drivers must be able to run without a master object if they support
2845 render nodes. If, on the other hand, a driver requires shared state
2846 between clients which is visible to user-space and accessible beyond
2847 open-file boundaries, they cannot support render nodes.
2851 <!-- External: vblank handling -->
2854 <title>VBlank event handling</title>
2856 The DRM core exposes two vertical blank related ioctls:
2859 <term>DRM_IOCTL_WAIT_VBLANK</term>
2862 This takes a struct drm_wait_vblank structure as its argument,
2863 and it is used to block or request a signal when a specified
2864 vblank event occurs.
2869 <term>DRM_IOCTL_MODESET_CTL</term>
2872 This should be called by application level drivers before and
2873 after mode setting, since on many devices the vertical blank
2874 counter is reset at that time. Internally, the DRM snapshots
2875 the last vblank count when the ioctl is called with the
2876 _DRM_PRE_MODESET command, so that the counter won't go backwards
2877 (which is dealt with when _DRM_POST_MODESET is used).
2882 <!--!Edrivers/char/drm/drm_irq.c-->
2888 <part id="drmDrivers">
2889 <title>DRM Drivers</title>
2893 This second part of the DRM Developer's Guide documents driver code,
2894 implementation details and also all the driver-specific userspace
2895 interfaces. Especially since all hardware-acceleration interfaces to
2896 userspace are driver specific for efficiency and other reasons these
2897 interfaces can be rather substantial. Hence every driver has its own
2902 <chapter id="drmI915">
2903 <title>drm/i915 Intel GFX Driver</title>
2905 The drm/i915 driver supports all (with the exception of some very early
2906 models) integrated GFX chipsets with both Intel display and rendering
2907 blocks. This excludes a set of SoC platforms with an SGX rendering unit,
2908 those have basic support through the gma500 drm driver.
2911 <title>Display Hardware Handling</title>
2913 This section covers everything related to the display hardware including
2914 the mode setting infrastructure, plane, sprite and cursor handling and
2915 display, output probing and related topics.
2918 <title>Mode Setting Infrastructure</title>
2920 The i915 driver is thus far the only DRM driver which doesn't use the
2921 common DRM helper code to implement mode setting sequences. Thus it
2922 has its own tailor-made infrastructure for executing a display
2923 configuration change.
2927 <title>Plane Configuration</title>
2929 This section covers plane configuration and composition with the
2930 primary plane, sprites, cursors and overlays. This includes the
2931 infrastructure to do atomic vsync'ed updates of all this state and
2932 also tightly coupled topics like watermark setup and computation,
2933 framebuffer compression and panel self refresh.
2937 <title>Output Probing</title>
2939 This section covers output probing and related infrastructure like the
2940 hotplug interrupt storm detection and mitigation code. Note that the
2941 i915 driver still uses most of the common DRM helper code for output
2942 probing, so those sections fully apply.
2948 <title>Memory Management and Command Submission</title>
2950 This sections covers all things related to the GEM implementation in the
projects / cascardo / linux.git / blob