arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi

   1 /*
   2  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "imx6q.dtsi"
  13
  14 / {
  15         model = "Phytec phyFLEX-i.MX6 Ouad";
  16         compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
  17
  18         memory {
  19                 reg = <0x10000000 0x80000000>;
  20         };
  21 };
  22
  23 &iomuxc {
  24         pinctrl-names = "default";
  25         pinctrl-0 = <&pinctrl_hog>;
  26
  27         hog {
  28                 pinctrl_hog: hoggrp {
  29                         fsl,pins = <
  30                                 MX6Q_PAD_EIM_D23__GPIO3_IO23    0x80000000
  31                         >;
  32                 };
  33         };
  34
  35         pfla02 {
  36                 pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
  37                         fsl,pins = <
  38                                 MX6Q_PAD_ENET_RXD0__GPIO1_IO27  0x80000000
  39                                 MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000
  40                         >;
  41                 };
  42         };
  43 };
  44
  45 &fec {
  46         pinctrl-names = "default";
  47         pinctrl-0 = <&pinctrl_enet_3>;
  48         phy-mode = "rgmii";
  49         phy-reset-gpios = <&gpio3 23 0>;
  50         status = "disabled";
  51 };
  52
  53 &uart4 {
  54         pinctrl-names = "default";
  55         pinctrl-0 = <&pinctrl_uart4_1>;
  56         status = "disabled";
  57 };
  58
  59 &usdhc2 {
  60         pinctrl-names = "default";
  61         pinctrl-0 = <&pinctrl_usdhc2_2>;
  62         cd-gpios = <&gpio1 4 0>;
  63         wp-gpios = <&gpio1 2 0>;
  64         status = "disabled";
  65 };
  66
  67 &usdhc3 {
  68         pinctrl-names = "default";
  69         pinctrl-0 = <&pinctrl_usdhc3_2
  70                      &pinctrl_usdhc3_pfla02>;
  71         cd-gpios = <&gpio1 27 0>;
  72         wp-gpios = <&gpio1 29 0>;
  73         status = "disabled";
  74 };