arch/arm/boot/dts/kirkwood-6281.dtsi

   1 / {
   2         ocp@f1000000 {
   3                 pinctrl: pinctrl@10000 {
   4                         compatible = "marvell,88f6281-pinctrl";
   5                         reg = <0x10000 0x20>;
   6
   7                         pmx_nand: pmx-nand {
   8                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
   9                                                "mpp4", "mpp5", "mpp18",
  10                                                "mpp19";
  11                                 marvell,function = "nand";
  12                         };
  13                         pmx_sata0: pmx-sata0 {
  14                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  15                                 marvell,function = "sata0";
  16                         };
  17                         pmx_sata1: pmx-sata1 {
  18                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  19                                 marvell,function = "sata1";
  20                         };
  21                         pmx_spi: pmx-spi {
  22                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
  23                                 marvell,function = "spi";
  24                         };
  25                         pmx_twsi0: pmx-twsi0 {
  26                                 marvell,pins = "mpp8", "mpp9";
  27                                 marvell,function = "twsi0";
  28                         };
  29                         pmx_uart0: pmx-uart0 {
  30                                 marvell,pins = "mpp10", "mpp11";
  31                                 marvell,function = "uart0";
  32                         };
  33                         pmx_uart1: pmx-uart1 {
  34                                 marvell,pins = "mpp13", "mpp14";
  35                                 marvell,function = "uart1";
  36                         };
  37                         pmx_sdio: pmx-sdio {
  38                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  39                                                "mpp15", "mpp16", "mpp17";
  40                                 marvell,function = "sdio";
  41                         };
  42                 };
  43
  44                 pcie-controller {
  45                         compatible = "marvell,kirkwood-pcie";
  46                         status = "disabled";
  47                         device_type = "pci";
  48
  49                         #address-cells = <3>;
  50                         #size-cells = <2>;
  51
  52                         bus-range = <0x00 0xff>;
  53
  54                         ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
  55                                   0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
  56                                   0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
  57
  58                         pcie@1,0 {
  59                                 device_type = "pci";
  60                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  61                                 reg = <0x0800 0 0 0 0>;
  62                                 #address-cells = <3>;
  63                                 #size-cells = <2>;
  64                                 #interrupt-cells = <1>;
  65                                 ranges;
  66                                 interrupt-map-mask = <0 0 0 0>;
  67                                 interrupt-map = <0 0 0 0 &intc 9>;
  68                                 marvell,pcie-port = <0>;
  69                                 marvell,pcie-lane = <0>;
  70                                 clocks = <&gate_clk 2>;
  71                                 status = "disabled";
  72                         };
  73                 };
  74
  75                 rtc@10300 {
  76                         compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
  77                         reg = <0x10300 0x20>;
  78                         interrupts = <53>;
  79                         clocks = <&gate_clk 7>;
  80                 };
  81
  82                 sata@80000 {
  83                         compatible = "marvell,orion-sata";
  84                         reg = <0x80000 0x5000>;
  85                         interrupts = <21>;
  86                         clocks = <&gate_clk 14>, <&gate_clk 15>;
  87                         clock-names = "0", "1";
  88                         status = "disabled";
  89                 };
  90
  91                 mvsdio@90000 {
  92                         compatible = "marvell,orion-sdio";
  93                         reg = <0x90000 0x200>;
  94                         interrupts = <28>;
  95                         clocks = <&gate_clk 4>;
  96                         bus-width = <4>;
  97                         cap-sdio-irq;
  98                         cap-sd-highspeed;
  99                         cap-mmc-highspeed;
 100                         status = "disabled";
 101                 };
 102         };
 103 };