arch/arm/boot/dts/kirkwood-nsa310a.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood-nsa310-common.dtsi"
   4
   5 /*
   6  * There are at least two different NSA310 designs. This variant does
   7  * not have the red USB Led.
   8  */
   9
  10 / {
  11         compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  12
  13         memory {
  14                 device_type = "memory";
  15                 reg = <0x00000000 0x10000000>;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         ocp@f1000000 {
  23                 pinctrl: pinctrl@10000 {
  24                         pinctrl-names = "default";
  25
  26                         pmx_led_esata_green: pmx-led-esata-green {
  27                                 marvell,pins = "mpp12";
  28                                 marvell,function = "gpio";
  29                         };
  30
  31                         pmx_led_esata_red: pmx-led-esata-red {
  32                                 marvell,pins = "mpp13";
  33                                 marvell,function = "gpio";
  34                         };
  35
  36                         pmx_led_usb_green: pmx-led-usb-green {
  37                                 marvell,pins = "mpp15";
  38                                 marvell,function = "gpio";
  39                         };
  40
  41                         pmx_usb_power_off: pmx-usb-power-off {
  42                                 marvell,pins = "mpp21";
  43                                 marvell,function = "gpio";
  44                         };
  45
  46                         pmx_led_sys_green: pmx-led-sys-green {
  47                                 marvell,pins = "mpp28";
  48                                 marvell,function = "gpio";
  49                         };
  50
  51                         pmx_led_sys_red: pmx-led-sys-red {
  52                                 marvell,pins = "mpp29";
  53                                 marvell,function = "gpio";
  54                         };
  55
  56                         pmx_btn_reset: pmx-btn-reset {
  57                                 marvell,pins = "mpp36";
  58                                 marvell,function = "gpio";
  59                         };
  60
  61                         pmx_btn_copy: pmx-btn-copy {
  62                                 marvell,pins = "mpp37";
  63                                 marvell,function = "gpio";
  64                         };
  65
  66                         pmx_led_copy_green: pmx-led-copy-green {
  67                                 marvell,pins = "mpp39";
  68                                 marvell,function = "gpio";
  69                         };
  70
  71                         pmx_led_copy_red: pmx-led-copy-red {
  72                                 marvell,pins = "mpp40";
  73                                 marvell,function = "gpio";
  74                         };
  75
  76                         pmx_led_hdd_green: pmx-led-hdd-green {
  77                                 marvell,pins = "mpp41";
  78                                 marvell,function = "gpio";
  79                         };
  80
  81                         pmx_led_hdd_red: pmx-led-hdd-red {
  82                                 marvell,pins = "mpp42";
  83                                 marvell,function = "gpio";
  84                         };
  85
  86                         pmx_btn_power: pmx-btn-power {
  87                                 marvell,pins = "mpp46";
  88                                 marvell,function = "gpio";
  89                         };
  90
  91                 };
  92
  93                 i2c@11000 {
  94                         status = "okay";
  95
  96                         lm85: lm85@2e {
  97                                 compatible = "national,lm85";
  98                                 reg = <0x2e>;
  99                         };
 100                 };
 101         };
 102
 103         gpio_keys {
 104                 compatible = "gpio-keys";
 105                 #address-cells = <1>;
 106                 #size-cells = <0>;
 107
 108                 button@1 {
 109                         label = "Power Button";
 110                         linux,code = <KEY_POWER>;
 111                         gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 112                 };
 113                 button@2 {
 114                         label = "Copy Button";
 115                         linux,code = <KEY_COPY>;
 116                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 117                 };
 118                 button@3 {
 119                         label = "Reset Button";
 120                         linux,code = <KEY_RESTART>;
 121                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 122                 };
 123         };
 124
 125         gpio-leds {
 126                 compatible = "gpio-leds";
 127
 128                 green-sys {
 129                         label = "nsa310:green:sys";
 130                         gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 131                 };
 132                 red-sys {
 133                         label = "nsa310:red:sys";
 134                         gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 135                 };
 136                 green-hdd {
 137                         label = "nsa310:green:hdd";
 138                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 139                 };
 140                 red-hdd {
 141                         label = "nsa310:red:hdd";
 142                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 143                 };
 144                 green-esata {
 145                         label = "nsa310:green:esata";
 146                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 147                 };
 148                 red-esata {
 149                         label = "nsa310:red:esata";
 150                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 151                 };
 152                 green-usb {
 153                         label = "nsa310:green:usb";
 154                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 155                 };
 156                 green-copy {
 157                         label = "nsa310:green:copy";
 158                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 159                 };
 160                 red-copy {
 161                         label = "nsa310:red:copy";
 162                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 163                 };
 164         };
 165 };