arch/arm/boot/dts/omap3-cm-t3x30.dtsi

   1 /*
   2  * Common support for CompuLab CM-T3x30 CoMs
   3  */
   4
   5 #include "omap3-cm-t3x.dtsi"
   6
   7 / {
   8         cpus {
   9                 cpu@0 {
  10                         cpu0-supply = <&vcc>;
  11                 };
  12         };
  13 };
  14
  15 &omap3_pmx_core {
  16
  17         smsc1_pins: pinmux_smsc1_pins {
  18                 pinctrl-single,pins = <
  19                         OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs5.gpmc_ncs5 */
  20                         OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
  21                 >;
  22         };
  23
  24         hsusb0_pins: pinmux_hsusb0_pins {
  25                 pinctrl-single,pins = <
  26                         OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)               /* hsusb0_clk.hsusb0_clk */
  27                         OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)               /* hsusb0_stp.hsusb0_stp */
  28                         OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_dir.hsusb0_dir */
  29                         OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_nxt.hsusb0_nxt */
  30                         OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data0.hsusb2_data0 */
  31                         OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data1.hsusb0_data1 */
  32                         OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data2.hsusb0_data2 */
  33                         OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data3 */
  34                         OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data4 */
  35                         OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data5 */
  36                         OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data6 */
  37                         OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* hsusb0_data7.hsusb0_data7 */
  38                 >;
  39         };
  40 };
  41
  42 #include "omap-gpmc-smsc911x.dtsi"
  43
  44 &gpmc {
  45         ranges = <5 0 0x2c000000 0x01000000>;
  46
  47         smsc1: ethernet@gpmc {
  48                 compatible = "smsc,lan9221", "smsc,lan9115";
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&smsc1_pins>;
  51                 interrupt-parent = <&gpio6>;
  52                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  53                 reg = <5 0 0xff>;
  54         };
  55 };
  56
  57 &i2c1 {
  58         twl: twl@48 {
  59                 reg = <0x48>;
  60                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
  61                 interrupt-parent = <&intc>;
  62         };
  63 };
  64
  65 #include "twl4030.dtsi"
  66 #include "twl4030_omap3.dtsi"
  67
  68 &mmc1 {
  69         vmmc-supply = <&vmmc1>;
  70 };
  71
  72 &twl_gpio {
  73         ti,use-leds;
  74         /* pullups: BIT(0) */
  75         ti,pullups = <0x000001>;
  76 };
  77
  78 &hsusb1_phy {
  79         reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
  80 };
  81
  82 &hsusb2_phy {
  83         reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
  84 };
  85
  86 &usb_otg_hs {
  87         pinctrl-names = "default";
  88         pinctrl-0 = <&hsusb0_pins>;
  89         interface-type = <0>;
  90         usb-phy = <&usb2_phy>;
  91         phys = <&usb2_phy>;
  92         phy-names = "usb2-phy";
  93         mode = <3>;
  94         power = <50>;
  95 };