arch/arm/boot/dts/vfxxx.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License
  11  *     version 2 as published by the Free Software Foundation.
  12  *
  13  *     This file is distributed in the hope that it will be useful
  14  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  *     GNU General Public License for more details.
  17  *
  18  * Or, alternatively
  19  *
  20  *  b) Permission is hereby granted, free of charge, to any person
  21  *     obtaining a copy of this software and associated documentation
  22  *     files (the "Software"), to deal in the Software without
  23  *     restriction, including without limitation the rights to use
  24  *     copy, modify, merge, publish, distribute, sublicense, and/or
  25  *     sell copies of the Software, and to permit persons to whom the
  26  *     Software is furnished to do so, subject to the following
  27  *     conditions:
  28  *
  29  *     The above copyright notice and this permission notice shall be
  30  *     included in all copies or substantial portions of the Software.
  31  *
  32  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  33  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  34  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  35  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  36  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  37  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  39  *     OTHER DEALINGS IN THE SOFTWARE.
  40  */
  41
  42 #include "vf610-pinfunc.h"
  43 #include <dt-bindings/clock/vf610-clock.h>
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45 #include <dt-bindings/gpio/gpio.h>
  46
  47 / {
  48         aliases {
  49                 can0 = &can0;
  50                 can1 = &can1;
  51                 ethernet0 = &fec0;
  52                 ethernet1 = &fec1;
  53                 serial0 = &uart0;
  54                 serial1 = &uart1;
  55                 serial2 = &uart2;
  56                 serial3 = &uart3;
  57                 serial4 = &uart4;
  58                 serial5 = &uart5;
  59                 gpio0 = &gpio0;
  60                 gpio1 = &gpio1;
  61                 gpio2 = &gpio2;
  62                 gpio3 = &gpio3;
  63                 gpio4 = &gpio4;
  64                 usbphy0 = &usbphy0;
  65                 usbphy1 = &usbphy1;
  66         };
  67
  68         fxosc: fxosc {
  69                 compatible = "fixed-clock";
  70                 #clock-cells = <0>;
  71                 clock-frequency = <24000000>;
  72         };
  73
  74         sxosc: sxosc {
  75                 compatible = "fixed-clock";
  76                 #clock-cells = <0>;
  77                 clock-frequency = <32768>;
  78         };
  79
  80         reboot: syscon-reboot {
  81                 compatible = "syscon-reboot";
  82                 regmap = <&src>;
  83                 offset = <0x0>;
  84                 mask = <0x1000>;
  85         };
  86
  87         soc {
  88                 #address-cells = <1>;
  89                 #size-cells = <1>;
  90                 compatible = "simple-bus";
  91                 interrupt-parent = <&mscm_ir>;
  92                 ranges;
  93
  94                 aips0: aips-bus@40000000 {
  95                         compatible = "fsl,aips-bus", "simple-bus";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98                         reg = <0x40000000 0x00070000>;
  99                         ranges;
 100
 101                         mscm_cpucfg: cpucfg@40001000 {
 102                                 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
 103                                 reg = <0x40001000 0x800>;
 104                         };
 105
 106                         mscm_ir: interrupt-controller@40001800 {
 107                                 compatible = "fsl,vf610-mscm-ir";
 108                                 reg = <0x40001800 0x400>;
 109                                 fsl,cpucfg = <&mscm_cpucfg>;
 110                                 interrupt-controller;
 111                                 #interrupt-cells = <2>;
 112                         };
 113
 114                         edma0: dma-controller@40018000 {
 115                                 #dma-cells = <2>;
 116                                 compatible = "fsl,vf610-edma";
 117                                 reg = <0x40018000 0x2000>,
 118                                         <0x40024000 0x1000>,
 119                                         <0x40025000 0x1000>;
 120                                 dma-channels = <32>;
 121                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
 122                                                 <9 IRQ_TYPE_LEVEL_HIGH>;
 123                                 interrupt-names = "edma-tx", "edma-err";
 124                                 clock-names = "dmamux0", "dmamux1";
 125                                 clocks = <&clks VF610_CLK_DMAMUX0>,
 126                                         <&clks VF610_CLK_DMAMUX1>;
 127                                 status = "disabled";
 128                         };
 129
 130                         can0: flexcan@40020000 {
 131                                 compatible = "fsl,vf610-flexcan";
 132                                 reg = <0x40020000 0x4000>;
 133                                 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
 134                                 clocks = <&clks VF610_CLK_FLEXCAN0>,
 135                                          <&clks VF610_CLK_FLEXCAN0>;
 136                                 clock-names = "ipg", "per";
 137                                 status = "disabled";
 138                         };
 139
 140                         uart0: serial@40027000 {
 141                                 compatible = "fsl,vf610-lpuart";
 142                                 reg = <0x40027000 0x1000>;
 143                                 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 144                                 clocks = <&clks VF610_CLK_UART0>;
 145                                 clock-names = "ipg";
 146                                 dmas = <&edma0 0 2>,
 147                                         <&edma0 0 3>;
 148                                 dma-names = "rx","tx";
 149                                 status = "disabled";
 150                         };
 151
 152                         uart1: serial@40028000 {
 153                                 compatible = "fsl,vf610-lpuart";
 154                                 reg = <0x40028000 0x1000>;
 155                                 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 156                                 clocks = <&clks VF610_CLK_UART1>;
 157                                 clock-names = "ipg";
 158                                 dmas = <&edma0 0 4>,
 159                                         <&edma0 0 5>;
 160                                 dma-names = "rx","tx";
 161                                 status = "disabled";
 162                         };
 163
 164                         uart2: serial@40029000 {
 165                                 compatible = "fsl,vf610-lpuart";
 166                                 reg = <0x40029000 0x1000>;
 167                                 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 168                                 clocks = <&clks VF610_CLK_UART2>;
 169                                 clock-names = "ipg";
 170                                 dmas = <&edma0 0 6>,
 171                                         <&edma0 0 7>;
 172                                 dma-names = "rx","tx";
 173                                 status = "disabled";
 174                         };
 175
 176                         uart3: serial@4002a000 {
 177                                 compatible = "fsl,vf610-lpuart";
 178                                 reg = <0x4002a000 0x1000>;
 179                                 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 180                                 clocks = <&clks VF610_CLK_UART3>;
 181                                 clock-names = "ipg";
 182                                 dmas = <&edma0 0 8>,
 183                                         <&edma0 0 9>;
 184                                 dma-names = "rx","tx";
 185                                 status = "disabled";
 186                         };
 187
 188                         dspi0: dspi0@4002c000 {
 189                                 #address-cells = <1>;
 190                                 #size-cells = <0>;
 191                                 compatible = "fsl,vf610-dspi";
 192                                 reg = <0x4002c000 0x1000>;
 193                                 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 194                                 clocks = <&clks VF610_CLK_DSPI0>;
 195                                 clock-names = "dspi";
 196                                 spi-num-chipselects = <6>;
 197                                 status = "disabled";
 198                         };
 199
 200                         dspi1: dspi1@4002d000 {
 201                                 #address-cells = <1>;
 202                                 #size-cells = <0>;
 203                                 compatible = "fsl,vf610-dspi";
 204                                 reg = <0x4002d000 0x1000>;
 205                                 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 206                                 clocks = <&clks VF610_CLK_DSPI1>;
 207                                 clock-names = "dspi";
 208                                 spi-num-chipselects = <4>;
 209                                 status = "disabled";
 210                         };
 211
 212                         sai0: sai@4002f000 {
 213                                 compatible = "fsl,vf610-sai";
 214                                 reg = <0x4002f000 0x1000>;
 215                                 interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
 216                                 clocks = <&clks VF610_CLK_SAI0>,
 217                                         <&clks VF610_CLK_SAI0_DIV>,
 218                                         <&clks 0>, <&clks 0>;
 219                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 220                                 dma-names = "tx", "rx";
 221                                 dmas = <&edma0 0 17>,
 222                                         <&edma0 0 16>;
 223                                 status = "disabled";
 224                         };
 225
 226                         sai1: sai@40030000 {
 227                                 compatible = "fsl,vf610-sai";
 228                                 reg = <0x40030000 0x1000>;
 229                                 interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
 230                                 clocks = <&clks VF610_CLK_SAI1>,
 231                                         <&clks VF610_CLK_SAI1_DIV>,
 232                                         <&clks 0>, <&clks 0>;
 233                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 234                                 dma-names = "tx", "rx";
 235                                 dmas = <&edma0 0 19>,
 236                                         <&edma0 0 18>;
 237                                 status = "disabled";
 238                         };
 239
 240                         sai2: sai@40031000 {
 241                                 compatible = "fsl,vf610-sai";
 242                                 reg = <0x40031000 0x1000>;
 243                                 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 244                                 clocks = <&clks VF610_CLK_SAI2>,
 245                                         <&clks VF610_CLK_SAI2_DIV>,
 246                                         <&clks 0>, <&clks 0>;
 247                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 248                                 dma-names = "tx", "rx";
 249                                 dmas = <&edma0 0 21>,
 250                                         <&edma0 0 20>;
 251                                 status = "disabled";
 252                         };
 253
 254                         sai3: sai@40032000 {
 255                                 compatible = "fsl,vf610-sai";
 256                                 reg = <0x40032000 0x1000>;
 257                                 interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
 258                                 clocks = <&clks VF610_CLK_SAI3>,
 259                                         <&clks VF610_CLK_SAI3_DIV>,
 260                                         <&clks 0>, <&clks 0>;
 261                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 262                                 dma-names = "tx", "rx";
 263                                 dmas = <&edma0 1 9>,
 264                                         <&edma0 1 8>;
 265                                 status = "disabled";
 266                         };
 267
 268                         pit: pit@40037000 {
 269                                 compatible = "fsl,vf610-pit";
 270                                 reg = <0x40037000 0x1000>;
 271                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 272                                 clocks = <&clks VF610_CLK_PIT>;
 273                                 clock-names = "pit";
 274                         };
 275
 276                         pwm0: pwm@40038000 {
 277                                 compatible = "fsl,vf610-ftm-pwm";
 278                                 #pwm-cells = <3>;
 279                                 reg = <0x40038000 0x1000>;
 280                                 clock-names = "ftm_sys", "ftm_ext",
 281                                               "ftm_fix", "ftm_cnt_clk_en";
 282                                 clocks = <&clks VF610_CLK_FTM0>,
 283                                         <&clks VF610_CLK_FTM0_EXT_SEL>,
 284                                         <&clks VF610_CLK_FTM0_FIX_SEL>,
 285                                         <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 286                                 status = "disabled";
 287                         };
 288
 289                         pwm1: pwm@40039000 {
 290                                 compatible = "fsl,vf610-ftm-pwm";
 291                                 #pwm-cells = <3>;
 292                                 reg = <0x40039000 0x1000>;
 293                                 clock-names = "ftm_sys", "ftm_ext",
 294                                               "ftm_fix", "ftm_cnt_clk_en";
 295                                 clocks = <&clks VF610_CLK_FTM1>,
 296                                         <&clks VF610_CLK_FTM1_EXT_SEL>,
 297                                         <&clks VF610_CLK_FTM1_FIX_SEL>,
 298                                         <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 299                                 status = "disabled";
 300                         };
 301
 302                         adc0: adc@4003b000 {
 303                                 compatible = "fsl,vf610-adc";
 304                                 reg = <0x4003b000 0x1000>;
 305                                 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 306                                 clocks = <&clks VF610_CLK_ADC0>;
 307                                 clock-names = "adc";
 308                                 #io-channel-cells = <1>;
 309                                 status = "disabled";
 310                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 311                                                         <20000000>;
 312                         };
 313
 314                         tcon0: timing-controller@4003d000 {
 315                                 compatible = "fsl,vf610-tcon";
 316                                 reg = <0x4003d000 0x1000>;
 317                                 clocks = <&clks VF610_CLK_TCON0>;
 318                                 clock-names = "ipg";
 319                                 status = "disabled";
 320                         };
 321
 322                         wdoga5: wdog@4003e000 {
 323                                 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 324                                 reg = <0x4003e000 0x1000>;
 325                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 326                                 clocks = <&clks VF610_CLK_WDT>;
 327                                 clock-names = "wdog";
 328                                 status = "disabled";
 329                         };
 330
 331                         qspi0: quadspi@40044000 {
 332                                 #address-cells = <1>;
 333                                 #size-cells = <0>;
 334                                 compatible = "fsl,vf610-qspi";
 335                                 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
 336                                 reg-names = "QuadSPI", "QuadSPI-memory";
 337                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 338                                 clocks = <&clks VF610_CLK_QSPI0_EN>,
 339                                         <&clks VF610_CLK_QSPI0>;
 340                                 clock-names = "qspi_en", "qspi";
 341                                 status = "disabled";
 342                         };
 343
 344                         iomuxc: iomuxc@40048000 {
 345                                 compatible = "fsl,vf610-iomuxc";
 346                                 reg = <0x40048000 0x1000>;
 347                         };
 348
 349                         gpio0: gpio@40049000 {
 350                                 compatible = "fsl,vf610-gpio";
 351                                 reg = <0x40049000 0x1000 0x400ff000 0x40>;
 352                                 gpio-controller;
 353                                 #gpio-cells = <2>;
 354                                 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 355                                 interrupt-controller;
 356                                 #interrupt-cells = <2>;
 357                                 gpio-ranges = <&iomuxc 0 0 32>;
 358                         };
 359
 360                         gpio1: gpio@4004a000 {
 361                                 compatible = "fsl,vf610-gpio";
 362                                 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 363                                 gpio-controller;
 364                                 #gpio-cells = <2>;
 365                                 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 366                                 interrupt-controller;
 367                                 #interrupt-cells = <2>;
 368                                 gpio-ranges = <&iomuxc 0 32 32>;
 369                         };
 370
 371                         gpio2: gpio@4004b000 {
 372                                 compatible = "fsl,vf610-gpio";
 373                                 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 374                                 gpio-controller;
 375                                 #gpio-cells = <2>;
 376                                 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 377                                 interrupt-controller;
 378                                 #interrupt-cells = <2>;
 379                                 gpio-ranges = <&iomuxc 0 64 32>;
 380                         };
 381
 382                         gpio3: gpio@4004c000 {
 383                                 compatible = "fsl,vf610-gpio";
 384                                 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 385                                 gpio-controller;
 386                                 #gpio-cells = <2>;
 387                                 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 388                                 interrupt-controller;
 389                                 #interrupt-cells = <2>;
 390                                 gpio-ranges = <&iomuxc 0 96 32>;
 391                         };
 392
 393                         gpio4: gpio@4004d000 {
 394                                 compatible = "fsl,vf610-gpio";
 395                                 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 396                                 gpio-controller;
 397                                 #gpio-cells = <2>;
 398                                 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 399                                 interrupt-controller;
 400                                 #interrupt-cells = <2>;
 401                                 gpio-ranges = <&iomuxc 0 128 7>;
 402                         };
 403
 404                         anatop: anatop@40050000 {
 405                                 compatible = "fsl,vf610-anatop", "syscon";
 406                                 reg = <0x40050000 0x400>;
 407                         };
 408
 409                         usbphy0: usbphy@40050800 {
 410                                 compatible = "fsl,vf610-usbphy";
 411                                 reg = <0x40050800 0x400>;
 412                                 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 413                                 clocks = <&clks VF610_CLK_USBPHY0>;
 414                                 fsl,anatop = <&anatop>;
 415                                 status = "disabled";
 416                         };
 417
 418                         usbphy1: usbphy@40050c00 {
 419                                 compatible = "fsl,vf610-usbphy";
 420                                 reg = <0x40050c00 0x400>;
 421                                 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 422                                 clocks = <&clks VF610_CLK_USBPHY1>;
 423                                 fsl,anatop = <&anatop>;
 424                                 status = "disabled";
 425                         };
 426
 427                         dcu0: dcu@40058000 {
 428                                 compatible = "fsl,vf610-dcu";
 429                                 reg = <0x40058000 0x1200>;
 430                                 interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
 431                                 clocks = <&clks VF610_CLK_DCU0>,
 432                                         <&clks VF610_CLK_DCU0_DIV>;
 433                                 clock-names = "dcu", "pix";
 434                                 fsl,tcon = <&tcon0>;
 435                                 status = "disabled";
 436                         };
 437
 438                         i2c0: i2c@40066000 {
 439                                 #address-cells = <1>;
 440                                 #size-cells = <0>;
 441                                 compatible = "fsl,vf610-i2c";
 442                                 reg = <0x40066000 0x1000>;
 443                                 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 444                                 clocks = <&clks VF610_CLK_I2C0>;
 445                                 clock-names = "ipg";
 446                                 dmas = <&edma0 0 50>,
 447                                         <&edma0 0 51>;
 448                                 dma-names = "rx","tx";
 449                                 status = "disabled";
 450                         };
 451
 452                         i2c1: i2c@40067000 {
 453                                 #address-cells = <1>;
 454                                 #size-cells = <0>;
 455                                 compatible = "fsl,vf610-i2c";
 456                                 reg = <0x40067000 0x1000>;
 457                                 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 458                                 clocks = <&clks VF610_CLK_I2C1>;
 459                                 clock-names = "ipg";
 460                                 dmas = <&edma0 0 52>,
 461                                         <&edma0 0 53>;
 462                                 dma-names = "rx","tx";
 463                                 status = "disabled";
 464                         };
 465
 466                         clks: ccm@4006b000 {
 467                                 compatible = "fsl,vf610-ccm";
 468                                 reg = <0x4006b000 0x1000>;
 469                                 clocks = <&sxosc>, <&fxosc>;
 470                                 clock-names = "sxosc", "fxosc";
 471                                 #clock-cells = <1>;
 472                         };
 473
 474                         usbdev0: usb@40034000 {
 475                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 476                                 reg = <0x40034000 0x800>;
 477                                 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 478                                 clocks = <&clks VF610_CLK_USBC0>;
 479                                 fsl,usbphy = <&usbphy0>;
 480                                 fsl,usbmisc = <&usbmisc0 0>;
 481                                 dr_mode = "peripheral";
 482                                 status = "disabled";
 483                         };
 484
 485                         usbmisc0: usb@40034800 {
 486                                 #index-cells = <1>;
 487                                 compatible = "fsl,vf610-usbmisc";
 488                                 reg = <0x40034800 0x200>;
 489                                 clocks = <&clks VF610_CLK_USBC0>;
 490                                 status = "disabled";
 491                         };
 492
 493                         src: src@4006e000 {
 494                                 compatible = "fsl,vf610-src", "syscon";
 495                                 reg = <0x4006e000 0x1000>;
 496                                 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 497                         };
 498                 };
 499
 500                 aips1: aips-bus@40080000 {
 501                         compatible = "fsl,aips-bus", "simple-bus";
 502                         #address-cells = <1>;
 503                         #size-cells = <1>;
 504                         reg = <0x40080000 0x0007f000>;
 505                         ranges;
 506
 507                         edma1: dma-controller@40098000 {
 508                                 #dma-cells = <2>;
 509                                 compatible = "fsl,vf610-edma";
 510                                 reg = <0x40098000 0x2000>,
 511                                         <0x400a1000 0x1000>,
 512                                         <0x400a2000 0x1000>;
 513                                 dma-channels = <32>;
 514                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 515                                                 <11 IRQ_TYPE_LEVEL_HIGH>;
 516                                 interrupt-names = "edma-tx", "edma-err";
 517                                 clock-names = "dmamux0", "dmamux1";
 518                                 clocks = <&clks VF610_CLK_DMAMUX2>,
 519                                         <&clks VF610_CLK_DMAMUX3>;
 520                                 status = "disabled";
 521                         };
 522
 523                         snvs0: snvs@400a7000 {
 524                             compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 525                                 reg = <0x400a7000 0x2000>;
 526
 527                                 snvsrtc: snvs-rtc-lp {
 528                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 529                                         regmap = <&snvs0>;
 530                                         offset = <0x34>;
 531                                         interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 532                                         clocks = <&clks VF610_CLK_SNVS>;
 533                                         clock-names = "snvs-rtc";
 534                                 };
 535                         };
 536
 537                         uart4: serial@400a9000 {
 538                                 compatible = "fsl,vf610-lpuart";
 539                                 reg = <0x400a9000 0x1000>;
 540                                 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 541                                 clocks = <&clks VF610_CLK_UART4>;
 542                                 clock-names = "ipg";
 543                                 status = "disabled";
 544                         };
 545
 546                         uart5: serial@400aa000 {
 547                                 compatible = "fsl,vf610-lpuart";
 548                                 reg = <0x400aa000 0x1000>;
 549                                 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 550                                 clocks = <&clks VF610_CLK_UART5>;
 551                                 clock-names = "ipg";
 552                                 status = "disabled";
 553                         };
 554
 555                         dspi2: dspi2@400ac000 {
 556                                 #address-cells = <1>;
 557                                 #size-cells = <0>;
 558                                 compatible = "fsl,vf610-dspi";
 559                                 reg = <0x400ac000 0x1000>;
 560                                 interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
 561                                 clocks = <&clks VF610_CLK_DSPI2>;
 562                                 clock-names = "dspi";
 563                                 spi-num-chipselects = <2>;
 564                                 status = "disabled";
 565                         };
 566
 567                         dspi3: dspi3@400ad000 {
 568                                 #address-cells = <1>;
 569                                 #size-cells = <0>;
 570                                 compatible = "fsl,vf610-dspi";
 571                                 reg = <0x400ad000 0x1000>;
 572                                 interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
 573                                 clocks = <&clks VF610_CLK_DSPI3>;
 574                                 clock-names = "dspi";
 575                                 spi-num-chipselects = <2>;
 576                                 status = "disabled";
 577                         };
 578
 579                         adc1: adc@400bb000 {
 580                                 compatible = "fsl,vf610-adc";
 581                                 reg = <0x400bb000 0x1000>;
 582                                 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 583                                 clocks = <&clks VF610_CLK_ADC1>;
 584                                 clock-names = "adc";
 585                                 #io-channel-cells = <1>;
 586                                 status = "disabled";
 587                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 588                                                         <20000000>;
 589                         };
 590
 591                         esdhc0: esdhc@400b1000 {
 592                                 compatible = "fsl,imx53-esdhc";
 593                                 reg = <0x400b1000 0x1000>;
 594                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 595                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 596                                         <&clks VF610_CLK_PLATFORM_BUS>,
 597                                         <&clks VF610_CLK_ESDHC0>;
 598                                 clock-names = "ipg", "ahb", "per";
 599                                 status = "disabled";
 600                         };
 601
 602                         esdhc1: esdhc@400b2000 {
 603                                 compatible = "fsl,imx53-esdhc";
 604                                 reg = <0x400b2000 0x1000>;
 605                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 606                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 607                                         <&clks VF610_CLK_PLATFORM_BUS>,
 608                                         <&clks VF610_CLK_ESDHC1>;
 609                                 clock-names = "ipg", "ahb", "per";
 610                                 status = "disabled";
 611                         };
 612
 613                         usbh1: usb@400b4000 {
 614                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 615                                 reg = <0x400b4000 0x800>;
 616                                 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 617                                 clocks = <&clks VF610_CLK_USBC1>;
 618                                 fsl,usbphy = <&usbphy1>;
 619                                 fsl,usbmisc = <&usbmisc1 0>;
 620                                 dr_mode = "host";
 621                                 status = "disabled";
 622                         };
 623
 624                         usbmisc1: usb@400b4800 {
 625                                 #index-cells = <1>;
 626                                 compatible = "fsl,vf610-usbmisc";
 627                                 reg = <0x400b4800 0x200>;
 628                                 clocks = <&clks VF610_CLK_USBC1>;
 629                                 status = "disabled";
 630                         };
 631
 632                         ftm: ftm@400b8000 {
 633                                 compatible = "fsl,ftm-timer";
 634                                 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 635                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 636                                 clock-names = "ftm-evt", "ftm-src",
 637                                         "ftm-evt-counter-en", "ftm-src-counter-en";
 638                                 clocks = <&clks VF610_CLK_FTM2>,
 639                                         <&clks VF610_CLK_FTM3>,
 640                                         <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 641                                         <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 642                                 status = "disabled";
 643                         };
 644
 645                         qspi1: quadspi@400c4000 {
 646                                 #address-cells = <1>;
 647                                 #size-cells = <0>;
 648                                 compatible = "fsl,vf610-qspi";
 649                                 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
 650                                 reg-names = "QuadSPI", "QuadSPI-memory";
 651                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 652                                 clocks = <&clks VF610_CLK_QSPI1_EN>,
 653                                         <&clks VF610_CLK_QSPI1>;
 654                                 clock-names = "qspi_en", "qspi";
 655                                 status = "disabled";
 656                         };
 657
 658                         dac0: dac@400cc000 {
 659                                 compatible = "fsl,vf610-dac";
 660                                 reg = <0x400cc000 1000>;
 661                                 interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
 662                                 clock-names = "dac";
 663                                 clocks = <&clks VF610_CLK_DAC0>;
 664                                 status = "disabled";
 665                         };
 666
 667                         dac1: dac@400cd000 {
 668                                 compatible = "fsl,vf610-dac";
 669                                 reg = <0x400cd000 1000>;
 670                                 interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
 671                                 clock-names = "dac";
 672                                 clocks = <&clks VF610_CLK_DAC1>;
 673                                 status = "disabled";
 674                         };
 675
 676                         fec0: ethernet@400d0000 {
 677                                 compatible = "fsl,mvf600-fec";
 678                                 reg = <0x400d0000 0x1000>;
 679                                 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 680                                 clocks = <&clks VF610_CLK_ENET0>,
 681                                         <&clks VF610_CLK_ENET0>,
 682                                         <&clks VF610_CLK_ENET>;
 683                                 clock-names = "ipg", "ahb", "ptp";
 684                                 status = "disabled";
 685                         };
 686
 687                         fec1: ethernet@400d1000 {
 688                                 compatible = "fsl,mvf600-fec";
 689                                 reg = <0x400d1000 0x1000>;
 690                                 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 691                                 clocks = <&clks VF610_CLK_ENET1>,
 692                                         <&clks VF610_CLK_ENET1>,
 693                                         <&clks VF610_CLK_ENET>;
 694                                 clock-names = "ipg", "ahb", "ptp";
 695                                 status = "disabled";
 696                         };
 697
 698                         can1: flexcan@400d4000 {
 699                                 compatible = "fsl,vf610-flexcan";
 700                                 reg = <0x400d4000 0x4000>;
 701                                 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 702                                 clocks = <&clks VF610_CLK_FLEXCAN1>,
 703                                          <&clks VF610_CLK_FLEXCAN1>;
 704                                 clock-names = "ipg", "per";
 705                                 status = "disabled";
 706                         };
 707
 708                         nfc: nand@400e0000 {
 709                                 #address-cells = <1>;
 710                                 #size-cells = <0>;
 711                                 compatible = "fsl,vf610-nfc";
 712                                 reg = <0x400e0000 0x4000>;
 713                                 interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
 714                                 clocks = <&clks VF610_CLK_NFC>;
 715                                 clock-names = "nfc";
 716                                 status = "disabled";
 717                         };
 718
 719                         i2c2: i2c@400e6000 {
 720                                 #address-cells = <1>;
 721                                 #size-cells = <0>;
 722                                 compatible = "fsl,vf610-i2c";
 723                                 reg = <0x400e6000 0x1000>;
 724                                 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
 725                                 clocks = <&clks VF610_CLK_I2C2>;
 726                                 clock-names = "ipg";
 727                                 dmas = <&edma0 1 36>,
 728                                         <&edma0 1 37>;
 729                                 dma-names = "rx","tx";
 730                                 status = "disabled";
 731                         };
 732
 733                         i2c3: i2c@400e7000 {
 734                                 #address-cells = <1>;
 735                                 #size-cells = <0>;
 736                                 compatible = "fsl,vf610-i2c";
 737                                 reg = <0x400e7000 0x1000>;
 738                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 739                                 clocks = <&clks VF610_CLK_I2C3>;
 740                                 clock-names = "ipg";
 741                                 dmas = <&edma0 1 38>,
 742                                         <&edma0 1 39>;
 743                                 dma-names = "rx","tx";
 744                                 status = "disabled";
 745                         };
 746                 };
 747
 748                 iio-hwmon {
 749                         compatible = "iio-hwmon";
 750                         io-channels = <&adc0 16>, <&adc1 16>;
 751                 };
 752         };
 753 };