2 * Copyright (C) 2007 Atmel Corporation
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file COPYING in the main directory of this archive for
9 #include <asm/mach/arch.h>
10 #include <asm/mach/map.h>
12 #include <linux/dma-mapping.h>
13 #include <linux/platform_device.h>
14 #include <linux/i2c-gpio.h>
17 #include <video/atmel_lcdc.h>
19 #include <asm/arch/board.h>
20 #include <asm/arch/gpio.h>
21 #include <asm/arch/at91sam9rl.h>
22 #include <asm/arch/at91sam9rl_matrix.h>
23 #include <asm/arch/at91sam9_smc.h>
28 /* --------------------------------------------------------------------
30 * -------------------------------------------------------------------- */
32 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
33 static u64 mmc_dmamask = DMA_BIT_MASK(32);
34 static struct at91_mmc_data mmc_data;
36 static struct resource mmc_resources[] = {
38 .start = AT91SAM9RL_BASE_MCI,
39 .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
40 .flags = IORESOURCE_MEM,
43 .start = AT91SAM9RL_ID_MCI,
44 .end = AT91SAM9RL_ID_MCI,
45 .flags = IORESOURCE_IRQ,
49 static struct platform_device at91sam9rl_mmc_device = {
53 .dma_mask = &mmc_dmamask,
54 .coherent_dma_mask = DMA_BIT_MASK(32),
55 .platform_data = &mmc_data,
57 .resource = mmc_resources,
58 .num_resources = ARRAY_SIZE(mmc_resources),
61 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
68 at91_set_gpio_input(data->det_pin, 1);
69 at91_set_deglitch(data->det_pin, 1);
72 at91_set_gpio_input(data->wp_pin, 1);
74 at91_set_gpio_output(data->vcc_pin, 0);
77 at91_set_A_periph(AT91_PIN_PA2, 0);
80 at91_set_A_periph(AT91_PIN_PA1, 1);
82 /* DAT0, maybe DAT1..DAT3 */
83 at91_set_A_periph(AT91_PIN_PA0, 1);
85 at91_set_A_periph(AT91_PIN_PA3, 1);
86 at91_set_A_periph(AT91_PIN_PA4, 1);
87 at91_set_A_periph(AT91_PIN_PA5, 1);
91 platform_device_register(&at91sam9rl_mmc_device);
94 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
98 /* --------------------------------------------------------------------
100 * -------------------------------------------------------------------- */
102 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
103 static struct at91_nand_data nand_data;
105 #define NAND_BASE AT91_CHIPSELECT_3
107 static struct resource nand_resources[] = {
110 .end = NAND_BASE + SZ_256M - 1,
111 .flags = IORESOURCE_MEM,
114 .start = AT91_BASE_SYS + AT91_ECC,
115 .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
116 .flags = IORESOURCE_MEM,
120 static struct platform_device at91_nand_device = {
124 .platform_data = &nand_data,
126 .resource = nand_resources,
127 .num_resources = ARRAY_SIZE(nand_resources),
130 void __init at91_add_device_nand(struct at91_nand_data *data)
137 csa = at91_sys_read(AT91_MATRIX_EBICSA);
138 at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
140 /* set the bus interface characteristics */
141 at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
142 | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
144 at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
145 | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
147 at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
149 at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
152 if (data->enable_pin)
153 at91_set_gpio_output(data->enable_pin, 1);
157 at91_set_gpio_input(data->rdy_pin, 1);
159 /* card detect pin */
161 at91_set_gpio_input(data->det_pin, 1);
163 at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
164 at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
167 platform_device_register(&at91_nand_device);
171 void __init at91_add_device_nand(struct at91_nand_data *data) {}
175 /* --------------------------------------------------------------------
177 * -------------------------------------------------------------------- */
180 * Prefer the GPIO code since the TWI controller isn't robust
181 * (gets overruns and underruns under load) and can only issue
182 * repeated STARTs in one scenario (the driver doesn't yet handle them).
184 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
186 static struct i2c_gpio_platform_data pdata = {
187 .sda_pin = AT91_PIN_PA23,
188 .sda_is_open_drain = 1,
189 .scl_pin = AT91_PIN_PA24,
190 .scl_is_open_drain = 1,
191 .udelay = 2, /* ~100 kHz */
194 static struct platform_device at91sam9rl_twi_device = {
197 .dev.platform_data = &pdata,
200 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
202 at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
203 at91_set_multi_drive(AT91_PIN_PA23, 1);
205 at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
206 at91_set_multi_drive(AT91_PIN_PA24, 1);
208 i2c_register_board_info(0, devices, nr_devices);
209 platform_device_register(&at91sam9rl_twi_device);
212 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
214 static struct resource twi_resources[] = {
216 .start = AT91SAM9RL_BASE_TWI0,
217 .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
218 .flags = IORESOURCE_MEM,
221 .start = AT91SAM9RL_ID_TWI0,
222 .end = AT91SAM9RL_ID_TWI0,
223 .flags = IORESOURCE_IRQ,
227 static struct platform_device at91sam9rl_twi_device = {
230 .resource = twi_resources,
231 .num_resources = ARRAY_SIZE(twi_resources),
234 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
236 /* pins used for TWI interface */
237 at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
238 at91_set_multi_drive(AT91_PIN_PA23, 1);
240 at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
241 at91_set_multi_drive(AT91_PIN_PA24, 1);
243 i2c_register_board_info(0, devices, nr_devices);
244 platform_device_register(&at91sam9rl_twi_device);
247 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
251 /* --------------------------------------------------------------------
253 * -------------------------------------------------------------------- */
255 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
256 static u64 spi_dmamask = DMA_BIT_MASK(32);
258 static struct resource spi_resources[] = {
260 .start = AT91SAM9RL_BASE_SPI,
261 .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
262 .flags = IORESOURCE_MEM,
265 .start = AT91SAM9RL_ID_SPI,
266 .end = AT91SAM9RL_ID_SPI,
267 .flags = IORESOURCE_IRQ,
271 static struct platform_device at91sam9rl_spi_device = {
275 .dma_mask = &spi_dmamask,
276 .coherent_dma_mask = DMA_BIT_MASK(32),
278 .resource = spi_resources,
279 .num_resources = ARRAY_SIZE(spi_resources),
282 static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
285 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
288 unsigned long cs_pin;
290 at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */
291 at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */
292 at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */
294 /* Enable SPI chip-selects */
295 for (i = 0; i < nr_devices; i++) {
296 if (devices[i].controller_data)
297 cs_pin = (unsigned long) devices[i].controller_data;
299 cs_pin = spi_standard_cs[devices[i].chip_select];
301 /* enable chip-select pin */
302 at91_set_gpio_output(cs_pin, 1);
304 /* pass chip-select pin to driver */
305 devices[i].controller_data = (void *) cs_pin;
308 spi_register_board_info(devices, nr_devices);
309 platform_device_register(&at91sam9rl_spi_device);
312 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
316 /* --------------------------------------------------------------------
318 * -------------------------------------------------------------------- */
320 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
321 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
322 static struct atmel_lcdfb_info lcdc_data;
324 static struct resource lcdc_resources[] = {
326 .start = AT91SAM9RL_LCDC_BASE,
327 .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
328 .flags = IORESOURCE_MEM,
331 .start = AT91SAM9RL_ID_LCDC,
332 .end = AT91SAM9RL_ID_LCDC,
333 .flags = IORESOURCE_IRQ,
335 #if defined(CONFIG_FB_INTSRAM)
337 .start = AT91SAM9RL_SRAM_BASE,
338 .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
339 .flags = IORESOURCE_MEM,
344 static struct platform_device at91_lcdc_device = {
345 .name = "atmel_lcdfb",
348 .dma_mask = &lcdc_dmamask,
349 .coherent_dma_mask = DMA_BIT_MASK(32),
350 .platform_data = &lcdc_data,
352 .resource = lcdc_resources,
353 .num_resources = ARRAY_SIZE(lcdc_resources),
356 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
362 at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
363 at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
364 at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
365 at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
366 at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
367 at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
368 at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
369 at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
370 at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
371 at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
372 at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
373 at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
374 at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
375 at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
376 at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
377 at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
378 at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
379 at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
380 at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
381 at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
382 at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
385 platform_device_register(&at91_lcdc_device);
388 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
392 /* --------------------------------------------------------------------
394 * -------------------------------------------------------------------- */
396 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
397 static struct platform_device at91sam9rl_rtc_device = {
403 static void __init at91_add_device_rtc(void)
405 platform_device_register(&at91sam9rl_rtc_device);
408 static void __init at91_add_device_rtc(void) {}
412 /* --------------------------------------------------------------------
414 * -------------------------------------------------------------------- */
416 static struct resource rtt_resources[] = {
418 .start = AT91_BASE_SYS + AT91_RTT,
419 .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
420 .flags = IORESOURCE_MEM,
424 static struct platform_device at91sam9rl_rtt_device = {
427 .resource = rtt_resources,
428 .num_resources = ARRAY_SIZE(rtt_resources),
431 static void __init at91_add_device_rtt(void)
433 platform_device_register(&at91sam9rl_rtt_device);
437 /* --------------------------------------------------------------------
439 * -------------------------------------------------------------------- */
441 #if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
442 static struct platform_device at91sam9rl_wdt_device = {
448 static void __init at91_add_device_watchdog(void)
450 platform_device_register(&at91sam9rl_wdt_device);
453 static void __init at91_add_device_watchdog(void) {}
457 /* --------------------------------------------------------------------
458 * SSC -- Synchronous Serial Controller
459 * -------------------------------------------------------------------- */
461 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
462 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
464 static struct resource ssc0_resources[] = {
466 .start = AT91SAM9RL_BASE_SSC0,
467 .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
468 .flags = IORESOURCE_MEM,
471 .start = AT91SAM9RL_ID_SSC0,
472 .end = AT91SAM9RL_ID_SSC0,
473 .flags = IORESOURCE_IRQ,
477 static struct platform_device at91sam9rl_ssc0_device = {
481 .dma_mask = &ssc0_dmamask,
482 .coherent_dma_mask = DMA_BIT_MASK(32),
484 .resource = ssc0_resources,
485 .num_resources = ARRAY_SIZE(ssc0_resources),
488 static inline void configure_ssc0_pins(unsigned pins)
490 if (pins & ATMEL_SSC_TF)
491 at91_set_A_periph(AT91_PIN_PC0, 1);
492 if (pins & ATMEL_SSC_TK)
493 at91_set_A_periph(AT91_PIN_PC1, 1);
494 if (pins & ATMEL_SSC_TD)
495 at91_set_A_periph(AT91_PIN_PA15, 1);
496 if (pins & ATMEL_SSC_RD)
497 at91_set_A_periph(AT91_PIN_PA16, 1);
498 if (pins & ATMEL_SSC_RK)
499 at91_set_B_periph(AT91_PIN_PA10, 1);
500 if (pins & ATMEL_SSC_RF)
501 at91_set_B_periph(AT91_PIN_PA22, 1);
504 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
506 static struct resource ssc1_resources[] = {
508 .start = AT91SAM9RL_BASE_SSC1,
509 .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
510 .flags = IORESOURCE_MEM,
513 .start = AT91SAM9RL_ID_SSC1,
514 .end = AT91SAM9RL_ID_SSC1,
515 .flags = IORESOURCE_IRQ,
519 static struct platform_device at91sam9rl_ssc1_device = {
523 .dma_mask = &ssc1_dmamask,
524 .coherent_dma_mask = DMA_BIT_MASK(32),
526 .resource = ssc1_resources,
527 .num_resources = ARRAY_SIZE(ssc1_resources),
530 static inline void configure_ssc1_pins(unsigned pins)
532 if (pins & ATMEL_SSC_TF)
533 at91_set_B_periph(AT91_PIN_PA29, 1);
534 if (pins & ATMEL_SSC_TK)
535 at91_set_B_periph(AT91_PIN_PA30, 1);
536 if (pins & ATMEL_SSC_TD)
537 at91_set_B_periph(AT91_PIN_PA13, 1);
538 if (pins & ATMEL_SSC_RD)
539 at91_set_B_periph(AT91_PIN_PA14, 1);
540 if (pins & ATMEL_SSC_RK)
541 at91_set_B_periph(AT91_PIN_PA9, 1);
542 if (pins & ATMEL_SSC_RF)
543 at91_set_B_periph(AT91_PIN_PA8, 1);
547 * Return the device node so that board init code can use it as the
548 * parent for the device node reflecting how it's used on this board.
550 * SSC controllers are accessed through library code, instead of any
551 * kind of all-singing/all-dancing driver. For example one could be
552 * used by a particular I2S audio codec's driver, while another one
553 * on the same system might be used by a custom data capture driver.
555 void __init at91_add_device_ssc(unsigned id, unsigned pins)
557 struct platform_device *pdev;
560 * NOTE: caller is responsible for passing information matching
561 * "pins" to whatever will be using each particular controller.
564 case AT91SAM9RL_ID_SSC0:
565 pdev = &at91sam9rl_ssc0_device;
566 configure_ssc0_pins(pins);
567 at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
569 case AT91SAM9RL_ID_SSC1:
570 pdev = &at91sam9rl_ssc1_device;
571 configure_ssc1_pins(pins);
572 at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
578 platform_device_register(pdev);
582 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
586 /* --------------------------------------------------------------------
588 * -------------------------------------------------------------------- */
590 #if defined(CONFIG_SERIAL_ATMEL)
591 static struct resource dbgu_resources[] = {
593 .start = AT91_VA_BASE_SYS + AT91_DBGU,
594 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
595 .flags = IORESOURCE_MEM,
598 .start = AT91_ID_SYS,
600 .flags = IORESOURCE_IRQ,
604 static struct atmel_uart_data dbgu_data = {
606 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
607 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
610 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
612 static struct platform_device at91sam9rl_dbgu_device = {
613 .name = "atmel_usart",
616 .dma_mask = &dbgu_dmamask,
617 .coherent_dma_mask = DMA_BIT_MASK(32),
618 .platform_data = &dbgu_data,
620 .resource = dbgu_resources,
621 .num_resources = ARRAY_SIZE(dbgu_resources),
624 static inline void configure_dbgu_pins(void)
626 at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
627 at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
630 static struct resource uart0_resources[] = {
632 .start = AT91SAM9RL_BASE_US0,
633 .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
634 .flags = IORESOURCE_MEM,
637 .start = AT91SAM9RL_ID_US0,
638 .end = AT91SAM9RL_ID_US0,
639 .flags = IORESOURCE_IRQ,
643 static struct atmel_uart_data uart0_data = {
648 static u64 uart0_dmamask = DMA_BIT_MASK(32);
650 static struct platform_device at91sam9rl_uart0_device = {
651 .name = "atmel_usart",
654 .dma_mask = &uart0_dmamask,
655 .coherent_dma_mask = DMA_BIT_MASK(32),
656 .platform_data = &uart0_data,
658 .resource = uart0_resources,
659 .num_resources = ARRAY_SIZE(uart0_resources),
662 static inline void configure_usart0_pins(unsigned pins)
664 at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
665 at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
667 if (pins & ATMEL_UART_RTS)
668 at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
669 if (pins & ATMEL_UART_CTS)
670 at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
671 if (pins & ATMEL_UART_DSR)
672 at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
673 if (pins & ATMEL_UART_DTR)
674 at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
675 if (pins & ATMEL_UART_DCD)
676 at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
677 if (pins & ATMEL_UART_RI)
678 at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
681 static struct resource uart1_resources[] = {
683 .start = AT91SAM9RL_BASE_US1,
684 .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
685 .flags = IORESOURCE_MEM,
688 .start = AT91SAM9RL_ID_US1,
689 .end = AT91SAM9RL_ID_US1,
690 .flags = IORESOURCE_IRQ,
694 static struct atmel_uart_data uart1_data = {
699 static u64 uart1_dmamask = DMA_BIT_MASK(32);
701 static struct platform_device at91sam9rl_uart1_device = {
702 .name = "atmel_usart",
705 .dma_mask = &uart1_dmamask,
706 .coherent_dma_mask = DMA_BIT_MASK(32),
707 .platform_data = &uart1_data,
709 .resource = uart1_resources,
710 .num_resources = ARRAY_SIZE(uart1_resources),
713 static inline void configure_usart1_pins(unsigned pins)
715 at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
716 at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
718 if (pins & ATMEL_UART_RTS)
719 at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
720 if (pins & ATMEL_UART_CTS)
721 at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
724 static struct resource uart2_resources[] = {
726 .start = AT91SAM9RL_BASE_US2,
727 .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
728 .flags = IORESOURCE_MEM,
731 .start = AT91SAM9RL_ID_US2,
732 .end = AT91SAM9RL_ID_US2,
733 .flags = IORESOURCE_IRQ,
737 static struct atmel_uart_data uart2_data = {
742 static u64 uart2_dmamask = DMA_BIT_MASK(32);
744 static struct platform_device at91sam9rl_uart2_device = {
745 .name = "atmel_usart",
748 .dma_mask = &uart2_dmamask,
749 .coherent_dma_mask = DMA_BIT_MASK(32),
750 .platform_data = &uart2_data,
752 .resource = uart2_resources,
753 .num_resources = ARRAY_SIZE(uart2_resources),
756 static inline void configure_usart2_pins(unsigned pins)
758 at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
759 at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
761 if (pins & ATMEL_UART_RTS)
762 at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
763 if (pins & ATMEL_UART_CTS)
764 at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
767 static struct resource uart3_resources[] = {
769 .start = AT91SAM9RL_BASE_US3,
770 .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
771 .flags = IORESOURCE_MEM,
774 .start = AT91SAM9RL_ID_US3,
775 .end = AT91SAM9RL_ID_US3,
776 .flags = IORESOURCE_IRQ,
780 static struct atmel_uart_data uart3_data = {
785 static u64 uart3_dmamask = DMA_BIT_MASK(32);
787 static struct platform_device at91sam9rl_uart3_device = {
788 .name = "atmel_usart",
791 .dma_mask = &uart3_dmamask,
792 .coherent_dma_mask = DMA_BIT_MASK(32),
793 .platform_data = &uart3_data,
795 .resource = uart3_resources,
796 .num_resources = ARRAY_SIZE(uart3_resources),
799 static inline void configure_usart3_pins(unsigned pins)
801 at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
802 at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
804 if (pins & ATMEL_UART_RTS)
805 at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
806 if (pins & ATMEL_UART_CTS)
807 at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
810 static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
811 struct platform_device *atmel_default_console_device; /* the serial console device */
813 void __init __deprecated at91_init_serial(struct at91_uart_config *config)
817 /* Fill in list of supported UARTs */
818 for (i = 0; i < config->nr_tty; i++) {
819 switch (config->tty_map[i]) {
821 configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
822 at91_uarts[i] = &at91sam9rl_uart0_device;
823 at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
826 configure_usart1_pins(0);
827 at91_uarts[i] = &at91sam9rl_uart1_device;
828 at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
831 configure_usart2_pins(0);
832 at91_uarts[i] = &at91sam9rl_uart2_device;
833 at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
836 configure_usart3_pins(0);
837 at91_uarts[i] = &at91sam9rl_uart3_device;
838 at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
841 configure_dbgu_pins();
842 at91_uarts[i] = &at91sam9rl_dbgu_device;
843 at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
848 at91_uarts[i]->id = i; /* update ID number to mapped ID */
851 /* Set serial console device */
852 if (config->console_tty < ATMEL_MAX_UART)
853 atmel_default_console_device = at91_uarts[config->console_tty];
854 if (!atmel_default_console_device)
855 printk(KERN_INFO "AT91: No default serial console defined.\n");
858 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
860 struct platform_device *pdev;
864 pdev = &at91sam9rl_dbgu_device;
865 configure_dbgu_pins();
866 at91_clock_associate("mck", &pdev->dev, "usart");
868 case AT91SAM9RL_ID_US0:
869 pdev = &at91sam9rl_uart0_device;
870 configure_usart0_pins(pins);
871 at91_clock_associate("usart0_clk", &pdev->dev, "usart");
873 case AT91SAM9RL_ID_US1:
874 pdev = &at91sam9rl_uart1_device;
875 configure_usart1_pins(pins);
876 at91_clock_associate("usart1_clk", &pdev->dev, "usart");
878 case AT91SAM9RL_ID_US2:
879 pdev = &at91sam9rl_uart2_device;
880 configure_usart2_pins(pins);
881 at91_clock_associate("usart2_clk", &pdev->dev, "usart");
883 case AT91SAM9RL_ID_US3:
884 pdev = &at91sam9rl_uart3_device;
885 configure_usart3_pins(pins);
886 at91_clock_associate("usart3_clk", &pdev->dev, "usart");
891 pdev->id = portnr; /* update to mapped ID */
893 if (portnr < ATMEL_MAX_UART)
894 at91_uarts[portnr] = pdev;
897 void __init at91_set_serial_console(unsigned portnr)
899 if (portnr < ATMEL_MAX_UART)
900 atmel_default_console_device = at91_uarts[portnr];
901 if (!atmel_default_console_device)
902 printk(KERN_INFO "AT91: No default serial console defined.\n");
905 void __init at91_add_device_serial(void)
909 for (i = 0; i < ATMEL_MAX_UART; i++) {
911 platform_device_register(at91_uarts[i]);
915 void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
916 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
917 void __init at91_set_serial_console(unsigned portnr) {}
918 void __init at91_add_device_serial(void) {}
922 /* -------------------------------------------------------------------- */
925 * These devices are always present and don't need any board-specific
928 static int __init at91_add_standard_devices(void)
930 at91_add_device_rtc();
931 at91_add_device_rtt();
932 at91_add_device_watchdog();
936 arch_initcall(at91_add_standard_devices);