2 * linux/arch/arm/mach-sa1100/badge4.c
4 * BadgePAD 4 specific initialization
6 * Tim Connors <connors@hpl.hp.com>
7 * Christopher Hoover <ch@hpl.hp.com>
9 * Copyright (C) 2002 Hewlett-Packard Company
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/platform_device.h>
20 #include <linux/delay.h>
21 #include <linux/tty.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
24 #include <linux/errno.h>
26 #include <mach/hardware.h>
27 #include <asm/mach-types.h>
28 #include <asm/setup.h>
29 #include <mach/irqs.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/flash.h>
33 #include <asm/mach/map.h>
34 #include <asm/hardware/sa1111.h>
35 #include <asm/mach/serial_sa1100.h>
37 #include <mach/badge4.h>
41 static struct resource sa1111_resources[] = {
43 .start = BADGE4_SA1111_BASE,
44 .end = BADGE4_SA1111_BASE + 0x00001fff,
45 .flags = IORESOURCE_MEM,
48 .start = BADGE4_IRQ_GPIO_SA1111,
49 .end = BADGE4_IRQ_GPIO_SA1111,
50 .flags = IORESOURCE_IRQ,
54 static int badge4_sa1111_enable(void *data, unsigned devid)
56 if (devid == SA1111_DEVID_USB)
57 badge4_set_5V(BADGE4_5V_USB, 1);
61 static void badge4_sa1111_disable(void *data, unsigned devid)
63 if (devid == SA1111_DEVID_USB)
64 badge4_set_5V(BADGE4_5V_USB, 0);
67 static struct sa1111_platform_data sa1111_info = {
68 .irq_base = IRQ_BOARD_END,
69 .disable_devs = SA1111_DEVID_PS2_MSE,
70 .enable = badge4_sa1111_enable,
71 .disable = badge4_sa1111_disable,
74 static u64 sa1111_dmamask = 0xffffffffUL;
76 static struct platform_device sa1111_device = {
80 .dma_mask = &sa1111_dmamask,
81 .coherent_dma_mask = 0xffffffff,
82 .platform_data = &sa1111_info,
84 .num_resources = ARRAY_SIZE(sa1111_resources),
85 .resource = sa1111_resources,
88 static struct platform_device *devices[] __initdata = {
92 static int __init badge4_sa1111_init(void)
95 * Ensure that the memory bus request/grant signals are setup,
96 * and the grant is held in its inactive state
103 return platform_add_devices(devices, ARRAY_SIZE(devices));
108 * 1 x Intel 28F320C3 Advanced+ Boot Block Flash (32 Mi bit)
109 * Eight 4 KiW Parameter Bottom Blocks (64 KiB)
110 * Sixty-three 32 KiW Main Blocks (4032 Ki b)
114 * 1 x Intel 28F640C3 Advanced+ Boot Block Flash (64 Mi bit)
115 * Eight 4 KiW Parameter Bottom Blocks (64 KiB)
116 * One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
118 static struct mtd_partition badge4_partitions[] = {
120 .name = "BLOB boot loader",
125 .offset = MTDPART_OFS_APPEND,
129 .offset = MTDPART_OFS_APPEND,
130 .size = MTDPART_SIZ_FULL
134 static struct flash_platform_data badge4_flash_data = {
135 .map_name = "cfi_probe",
136 .parts = badge4_partitions,
137 .nr_parts = ARRAY_SIZE(badge4_partitions),
140 static struct resource badge4_flash_resource = {
141 .start = SA1100_CS0_PHYS,
142 .end = SA1100_CS0_PHYS + SZ_64M - 1,
143 .flags = IORESOURCE_MEM,
146 static int five_v_on __initdata = 0;
148 static int __init five_v_on_setup(char *ignore)
153 __setup("five_v_on", five_v_on_setup);
156 static int __init badge4_init(void)
160 if (!machine_is_badge4())
164 GPCR = (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
165 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
166 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
167 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
168 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
169 BADGE4_GPIO_GPC_VID);
170 GPDR &= ~BADGE4_GPIO_INT_VID;
171 GPDR |= (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
172 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
173 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
174 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
175 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
176 BADGE4_GPIO_GPC_VID);
179 GPCR = (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
180 GPDR |= (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
183 GPCR = (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
184 GPDR |= (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
186 /* CPLD muxsel0 input for mux/adc chip select */
187 GPCR = BADGE4_GPIO_MUXSEL0;
188 GPDR |= BADGE4_GPIO_MUXSEL0;
190 /* test points: J5, J6 as inputs, J7 outputs */
191 GPDR &= ~(BADGE4_GPIO_TESTPT_J5 | BADGE4_GPIO_TESTPT_J6);
192 GPCR = BADGE4_GPIO_TESTPT_J7;
193 GPDR |= BADGE4_GPIO_TESTPT_J7;
195 /* 5V supply rail. */
196 GPCR = BADGE4_GPIO_PCMEN5V; /* initially off */
197 GPDR |= BADGE4_GPIO_PCMEN5V;
199 /* CPLD sdram type inputs; set up by blob */
200 //GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
201 printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
202 !!(GPLR & BADGE4_GPIO_SDTYP1),
203 !!(GPLR & BADGE4_GPIO_SDTYP0));
205 /* SA1111 reset pin; set up by blob */
206 //GPSR = BADGE4_GPIO_SA1111_NRST;
207 //GPDR |= BADGE4_GPIO_SA1111_NRST;
210 /* power management cruft */
216 PWER |= PWER_GPIO26; /* wake up on an edge from TESTPT_J5 */
217 PWER |= PWER_RTC; /* wake up if rtc fires */
219 /* drive sa1111_nrst during sleep */
220 PGSR |= BADGE4_GPIO_SA1111_NRST;
221 /* drive CPLD as is during sleep */
222 PGSR |= (GPLR & (BADGE4_GPIO_SDTYP0|BADGE4_GPIO_SDTYP1));
225 /* Now bring up the SA-1111. */
226 ret = badge4_sa1111_init();
229 "%s: SA-1111 initialization failed (%d)\n",
233 /* maybe turn on 5v0 from the start */
234 badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
236 sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
241 arch_initcall(badge4_init);
244 static unsigned badge4_5V_bitmap = 0;
246 void badge4_set_5V(unsigned subsystem, int on)
249 unsigned old_5V_bitmap;
251 local_irq_save(flags);
253 old_5V_bitmap = badge4_5V_bitmap;
256 badge4_5V_bitmap |= subsystem;
258 badge4_5V_bitmap &= ~subsystem;
261 /* detect on->off and off->on transitions */
262 if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
263 /* was off, now on */
264 printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
265 GPSR = BADGE4_GPIO_PCMEN5V;
266 } else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
267 /* was on, now off */
268 printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
269 GPCR = BADGE4_GPIO_PCMEN5V;
272 local_irq_restore(flags);
274 EXPORT_SYMBOL(badge4_set_5V);
277 static struct map_desc badge4_io_desc[] __initdata = {
279 .virtual = 0xf1000000,
280 .pfn = __phys_to_pfn(0x08000000),
281 .length = 0x00100000,
283 }, { /* SRAM bank 2 */
284 .virtual = 0xf2000000,
285 .pfn = __phys_to_pfn(0x10000000),
286 .length = 0x00100000,
289 .virtual = 0xf4000000,
290 .pfn = __phys_to_pfn(0x48000000),
291 .length = 0x00100000,
297 badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
300 Ser1SDCR0 |= SDCR0_UART;
304 static struct sa1100_port_fns badge4_port_fns __initdata = {
305 //.get_mctrl = badge4_get_mctrl,
306 //.set_mctrl = badge4_set_mctrl,
307 .pm = badge4_uart_pm,
310 static void __init badge4_map_io(void)
313 iotable_init(badge4_io_desc, ARRAY_SIZE(badge4_io_desc));
315 sa1100_register_uart_fns(&badge4_port_fns);
316 sa1100_register_uart(0, 3);
317 sa1100_register_uart(1, 1);
320 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
321 .atag_offset = 0x100,
322 .map_io = badge4_map_io,
323 .init_irq = sa1100_init_irq,
324 .timer = &sa1100_timer,
326 .dma_zone_size = SZ_1M,
328 .restart = sa11x0_restart,