arch/powerpc/boot/dts/p2041rdb.dts

   1 /*
   2  * P2041RDB Device Tree Source
   3  *
   4  * Copyright 2011 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "fsl/p2041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P2041RDB";
  39         compatible = "fsl,P2041RDB";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         memory {
  45                 device_type = "memory";
  46         };
  47
  48         dcsr: dcsr@f00000000 {
  49                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  50         };
  51
  52         soc: soc@ffe000000 {
  53                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  54                 reg = <0xf 0xfe000000 0 0x00001000>;
  55                 spi@110000 {
  56                         flash@0 {
  57                                 #address-cells = <1>;
  58                                 #size-cells = <1>;
  59                                 compatible = "spansion,s25sl12801";
  60                                 reg = <0>;
  61                                 spi-max-frequency = <40000000>; /* input clock */
  62                                 partition@u-boot {
  63                                         label = "u-boot";
  64                                         reg = <0x00000000 0x00100000>;
  65                                         read-only;
  66                                 };
  67                                 partition@kernel {
  68                                         label = "kernel";
  69                                         reg = <0x00100000 0x00500000>;
  70                                         read-only;
  71                                 };
  72                                 partition@dtb {
  73                                         label = "dtb";
  74                                         reg = <0x00600000 0x00100000>;
  75                                         read-only;
  76                                 };
  77                                 partition@fs {
  78                                         label = "file system";
  79                                         reg = <0x00700000 0x00900000>;
  80                                 };
  81                         };
  82                 };
  83
  84                 i2c@118000 {
  85                         lm75b@48 {
  86                                 compatible = "nxp,lm75a";
  87                                 reg = <0x48>;
  88                         };
  89                         eeprom@50 {
  90                                 compatible = "at24,24c256";
  91                                 reg = <0x50>;
  92                         };
  93                         rtc@68 {
  94                                 compatible = "pericom,pt7c4338";
  95                                 reg = <0x68>;
  96                         };
  97                         adt7461@4c {
  98                                 compatible = "adi,adt7461";
  99                                 reg = <0x4c>;
 100                         };
 101                 };
 102
 103                 i2c@118100 {
 104                         eeprom@50 {
 105                                 compatible = "at24,24c256";
 106                                 reg = <0x50>;
 107                         };
 108                 };
 109
 110                 usb1: usb@211000 {
 111                         dr_mode = "host";
 112                 };
 113         };
 114
 115         rio: rapidio@ffe0c0000 {
 116                 reg = <0xf 0xfe0c0000 0 0x11000>;
 117
 118                 port1 {
 119                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 120                 };
 121                 port2 {
 122                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 123                 };
 124         };
 125
 126         lbc: localbus@ffe124000 {
 127                 reg = <0xf 0xfe124000 0 0x1000>;
 128                 ranges = <0 0 0xf 0xe8000000 0x08000000
 129                           1 0 0xf 0xffa00000 0x00040000>;
 130
 131                 flash@0,0 {
 132                         compatible = "cfi-flash";
 133                         reg = <0 0 0x08000000>;
 134                         bank-width = <2>;
 135                         device-width = <2>;
 136                 };
 137
 138                 nand@1,0 {
 139                         #address-cells = <1>;
 140                         #size-cells = <1>;
 141                         compatible = "fsl,elbc-fcm-nand";
 142                         reg = <0x1 0x0 0x40000>;
 143
 144                         partition@0 {
 145                                 label = "NAND U-Boot Image";
 146                                 reg = <0x0 0x02000000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@2000000 {
 151                                 label = "NAND Root File System";
 152                                 reg = <0x02000000 0x10000000>;
 153                         };
 154
 155                         partition@12000000 {
 156                                 label = "NAND Compressed RFS Image";
 157                                 reg = <0x12000000 0x08000000>;
 158                         };
 159
 160                         partition@1a000000 {
 161                                 label = "NAND Linux Kernel Image";
 162                                 reg = <0x1a000000 0x04000000>;
 163                         };
 164
 165                         partition@1e000000 {
 166                                 label = "NAND DTB Image";
 167                                 reg = <0x1e000000 0x01000000>;
 168                         };
 169
 170                         partition@1f000000 {
 171                                 label = "NAND Writable User area";
 172                                 reg = <0x1f000000 0x01000000>;
 173                         };
 174                 };
 175         };
 176
 177         pci0: pcie@ffe200000 {
 178                 reg = <0xf 0xfe200000 0 0x1000>;
 179                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 180                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 181                 pcie@0 {
 182                         ranges = <0x02000000 0 0xe0000000
 183                                   0x02000000 0 0xe0000000
 184                                   0 0x20000000
 185
 186                                   0x01000000 0 0x00000000
 187                                   0x01000000 0 0x00000000
 188                                   0 0x00010000>;
 189                 };
 190         };
 191
 192         pci1: pcie@ffe201000 {
 193                 reg = <0xf 0xfe201000 0 0x1000>;
 194                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 195                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 196                 pcie@0 {
 197                         ranges = <0x02000000 0 0xe0000000
 198                                   0x02000000 0 0xe0000000
 199                                   0 0x20000000
 200
 201                                   0x01000000 0 0x00000000
 202                                   0x01000000 0 0x00000000
 203                                   0 0x00010000>;
 204                 };
 205         };
 206
 207         pci2: pcie@ffe202000 {
 208                 reg = <0xf 0xfe202000 0 0x1000>;
 209                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 210                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 211                 pcie@0 {
 212                         ranges = <0x02000000 0 0xe0000000
 213                                   0x02000000 0 0xe0000000
 214                                   0 0x20000000
 215
 216                                   0x01000000 0 0x00000000
 217                                   0x01000000 0 0x00000000
 218                                   0 0x00010000>;
 219                 };
 220         };
 221 };
 222
 223 /include/ "fsl/p2041si-post.dtsi"