arch/powerpc/boot/dts/sbc8548-post.dtsi

   1 /*
   2  * SBC8548 Device Tree Source
   3  *
   4  * Copyright 2007 Wind River Systems Inc.
   5  *
   6  * Paul Gortmaker (see MAINTAINERS for contact information)
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  */
  13
  14 /{
  15         soc8548@e0000000 {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 device_type = "soc";
  19                 ranges = <0x00000000 0xe0000000 0x00100000>;
  20                 bus-frequency = <0>;
  21                 compatible = "simple-bus";
  22
  23                 ecm-law@0 {
  24                         compatible = "fsl,ecm-law";
  25                         reg = <0x0 0x1000>;
  26                         fsl,num-laws = <10>;
  27                 };
  28
  29                 ecm@1000 {
  30                         compatible = "fsl,mpc8548-ecm", "fsl,ecm";
  31                         reg = <0x1000 0x1000>;
  32                         interrupts = <17 2>;
  33                         interrupt-parent = <&mpic>;
  34                 };
  35
  36                 memory-controller@2000 {
  37                         compatible = "fsl,mpc8548-memory-controller";
  38                         reg = <0x2000 0x1000>;
  39                         interrupt-parent = <&mpic>;
  40                         interrupts = <0x12 0x2>;
  41                 };
  42
  43                 L2: l2-cache-controller@20000 {
  44                         compatible = "fsl,mpc8548-l2-cache-controller";
  45                         reg = <0x20000 0x1000>;
  46                         cache-line-size = <0x20>;       // 32 bytes
  47                         cache-size = <0x80000>; // L2, 512K
  48                         interrupt-parent = <&mpic>;
  49                         interrupts = <0x10 0x2>;
  50                 };
  51
  52                 i2c@3000 {
  53                         #address-cells = <1>;
  54                         #size-cells = <0>;
  55                         cell-index = <0>;
  56                         compatible = "fsl-i2c";
  57                         reg = <0x3000 0x100>;
  58                         interrupts = <0x2b 0x2>;
  59                         interrupt-parent = <&mpic>;
  60                         dfsrr;
  61                 };
  62
  63                 i2c@3100 {
  64                         #address-cells = <1>;
  65                         #size-cells = <0>;
  66                         cell-index = <1>;
  67                         compatible = "fsl-i2c";
  68                         reg = <0x3100 0x100>;
  69                         interrupts = <0x2b 0x2>;
  70                         interrupt-parent = <&mpic>;
  71                         dfsrr;
  72                 };
  73
  74                 dma@21300 {
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77                         compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
  78                         reg = <0x21300 0x4>;
  79                         ranges = <0x0 0x21100 0x200>;
  80                         cell-index = <0>;
  81                         dma-channel@0 {
  82                                 compatible = "fsl,mpc8548-dma-channel",
  83                                                 "fsl,eloplus-dma-channel";
  84                                 reg = <0x0 0x80>;
  85                                 cell-index = <0>;
  86                                 interrupt-parent = <&mpic>;
  87                                 interrupts = <20 2>;
  88                         };
  89                         dma-channel@80 {
  90                                 compatible = "fsl,mpc8548-dma-channel",
  91                                                 "fsl,eloplus-dma-channel";
  92                                 reg = <0x80 0x80>;
  93                                 cell-index = <1>;
  94                                 interrupt-parent = <&mpic>;
  95                                 interrupts = <21 2>;
  96                         };
  97                         dma-channel@100 {
  98                                 compatible = "fsl,mpc8548-dma-channel",
  99                                                 "fsl,eloplus-dma-channel";
 100                                 reg = <0x100 0x80>;
 101                                 cell-index = <2>;
 102                                 interrupt-parent = <&mpic>;
 103                                 interrupts = <22 2>;
 104                         };
 105                         dma-channel@180 {
 106                                 compatible = "fsl,mpc8548-dma-channel",
 107                                                 "fsl,eloplus-dma-channel";
 108                                 reg = <0x180 0x80>;
 109                                 cell-index = <3>;
 110                                 interrupt-parent = <&mpic>;
 111                                 interrupts = <23 2>;
 112                         };
 113                 };
 114
 115                 enet0: ethernet@24000 {
 116                         #address-cells = <1>;
 117                         #size-cells = <1>;
 118                         cell-index = <0>;
 119                         device_type = "network";
 120                         model = "eTSEC";
 121                         compatible = "gianfar";
 122                         reg = <0x24000 0x1000>;
 123                         ranges = <0x0 0x24000 0x1000>;
 124                         local-mac-address = [ 00 00 00 00 00 00 ];
 125                         interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
 126                         interrupt-parent = <&mpic>;
 127                         tbi-handle = <&tbi0>;
 128                         phy-handle = <&phy0>;
 129
 130                         mdio@520 {
 131                                 #address-cells = <1>;
 132                                 #size-cells = <0>;
 133                                 compatible = "fsl,gianfar-mdio";
 134                                 reg = <0x520 0x20>;
 135
 136                                 phy0: ethernet-phy@19 {
 137                                         interrupt-parent = <&mpic>;
 138                                         interrupts = <0x6 0x1>;
 139                                         reg = <0x19>;
 140                                         device_type = "ethernet-phy";
 141                                 };
 142                                 phy1: ethernet-phy@1a {
 143                                         interrupt-parent = <&mpic>;
 144                                         interrupts = <0x7 0x1>;
 145                                         reg = <0x1a>;
 146                                         device_type = "ethernet-phy";
 147                                 };
 148                                 tbi0: tbi-phy@11 {
 149                                         reg = <0x11>;
 150                                         device_type = "tbi-phy";
 151                                 };
 152                         };
 153                 };
 154
 155                 enet1: ethernet@25000 {
 156                         #address-cells = <1>;
 157                         #size-cells = <1>;
 158                         cell-index = <1>;
 159                         device_type = "network";
 160                         model = "eTSEC";
 161                         compatible = "gianfar";
 162                         reg = <0x25000 0x1000>;
 163                         ranges = <0x0 0x25000 0x1000>;
 164                         local-mac-address = [ 00 00 00 00 00 00 ];
 165                         interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
 166                         interrupt-parent = <&mpic>;
 167                         tbi-handle = <&tbi1>;
 168                         phy-handle = <&phy1>;
 169
 170                         mdio@520 {
 171                                 #address-cells = <1>;
 172                                 #size-cells = <0>;
 173                                 compatible = "fsl,gianfar-tbi";
 174                                 reg = <0x520 0x20>;
 175
 176                                 tbi1: tbi-phy@11 {
 177                                         reg = <0x11>;
 178                                         device_type = "tbi-phy";
 179                                 };
 180                         };
 181                 };
 182
 183                 serial0: serial@4500 {
 184                         cell-index = <0>;
 185                         device_type = "serial";
 186                         compatible = "fsl,ns16550", "ns16550";
 187                         reg = <0x4500 0x100>;   // reg base, size
 188                         clock-frequency = <0>;  // should we fill in in uboot?
 189                         interrupts = <0x2a 0x2>;
 190                         interrupt-parent = <&mpic>;
 191                 };
 192
 193                 serial1: serial@4600 {
 194                         cell-index = <1>;
 195                         device_type = "serial";
 196                         compatible = "fsl,ns16550", "ns16550";
 197                         reg = <0x4600 0x100>;   // reg base, size
 198                         clock-frequency = <0>;  // should we fill in in uboot?
 199                         interrupts = <0x2a 0x2>;
 200                         interrupt-parent = <&mpic>;
 201                 };
 202
 203                 global-utilities@e0000 {        //global utilities reg
 204                         compatible = "fsl,mpc8548-guts";
 205                         reg = <0xe0000 0x1000>;
 206                         fsl,has-rstcr;
 207                 };
 208
 209                 crypto@30000 {
 210                         compatible = "fsl,sec2.1", "fsl,sec2.0";
 211                         reg = <0x30000 0x10000>;
 212                         interrupts = <45 2>;
 213                         interrupt-parent = <&mpic>;
 214                         fsl,num-channels = <4>;
 215                         fsl,channel-fifo-len = <24>;
 216                         fsl,exec-units-mask = <0xfe>;
 217                         fsl,descriptor-types-mask = <0x12b0ebf>;
 218                 };
 219
 220                 mpic: pic@40000 {
 221                         interrupt-controller;
 222                         #address-cells = <0>;
 223                         #interrupt-cells = <2>;
 224                         reg = <0x40000 0x40000>;
 225                         compatible = "chrp,open-pic";
 226                         device_type = "open-pic";
 227                 };
 228         };
 229
 230         pci0: pci@e0008000 {
 231                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 232                 interrupt-map = <
 233                         /* IDSEL 0x01 (PCI-X slot) @66MHz */
 234                         0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
 235                         0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
 236                         0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
 237                         0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
 238
 239                         /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
 240                         0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
 241                         0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
 242                         0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
 243                         0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 244
 245                 interrupt-parent = <&mpic>;
 246                 interrupts = <0x18 0x2>;
 247                 bus-range = <0 0>;
 248                 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 249                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
 250                 clock-frequency = <66000000>;
 251                 #interrupt-cells = <1>;
 252                 #size-cells = <2>;
 253                 #address-cells = <3>;
 254                 reg = <0xe0008000 0x1000>;
 255                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 256                 device_type = "pci";
 257         };
 258
 259         pci1: pcie@e000a000 {
 260                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 261                 interrupt-map = <
 262
 263                         /* IDSEL 0x0 (PEX) */
 264                         0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
 265                         0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
 266                         0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
 267                         0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 268
 269                 interrupt-parent = <&mpic>;
 270                 interrupts = <0x1a 0x2>;
 271                 bus-range = <0x0 0xff>;
 272                 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 273                           0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
 274                 clock-frequency = <33000000>;
 275                 #interrupt-cells = <1>;
 276                 #size-cells = <2>;
 277                 #address-cells = <3>;
 278                 reg = <0xe000a000 0x1000>;
 279                 compatible = "fsl,mpc8548-pcie";
 280                 device_type = "pci";
 281                 pcie@0 {
 282                         reg = <0x0 0x0 0x0 0x0 0x0>;
 283                         #size-cells = <2>;
 284                         #address-cells = <3>;
 285                         device_type = "pci";
 286                         ranges = <0x02000000 0x0 0xa0000000
 287                                   0x02000000 0x0 0xa0000000
 288                                   0x0 0x10000000
 289
 290                                   0x01000000 0x0 0x00000000
 291                                   0x01000000 0x0 0x00000000
 292                                   0x0 0x00800000>;
 293                 };
 294         };
 295 };