Merge tag 'regmap-v3.15-nodev' of git://git.kernel.org/pub/scm/linux/kernel/git/broon...
[cascardo/linux.git] / arch / x86 / kernel / vmlinux.lds.S
1 /*
2  * ld script for the x86 kernel
3  *
4  * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
5  *
6  * Modernisation, unification and other changes and fixes:
7  *   Copyright (C) 2007-2009  Sam Ravnborg <sam@ravnborg.org>
8  *
9  *
10  * Don't define absolute symbols until and unless you know that symbol
11  * value is should remain constant even if kernel image is relocated
12  * at run time. Absolute symbols are not relocated. If symbol value should
13  * change if kernel is relocated, make the symbol section relative and
14  * put it inside the section definition.
15  */
16
17 #ifdef CONFIG_X86_32
18 #define LOAD_OFFSET __PAGE_OFFSET
19 #else
20 #define LOAD_OFFSET __START_KERNEL_map
21 #endif
22
23 #include <asm-generic/vmlinux.lds.h>
24 #include <asm/asm-offsets.h>
25 #include <asm/thread_info.h>
26 #include <asm/page_types.h>
27 #include <asm/cache.h>
28 #include <asm/boot.h>
29
30 #undef i386     /* in case the preprocessor is a 32bit one */
31
32 OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
33
34 #ifdef CONFIG_X86_32
35 OUTPUT_ARCH(i386)
36 ENTRY(phys_startup_32)
37 jiffies = jiffies_64;
38 #else
39 OUTPUT_ARCH(i386:x86-64)
40 ENTRY(phys_startup_64)
41 jiffies_64 = jiffies;
42 #endif
43
44 #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
45 /*
46  * On 64-bit, align RODATA to 2MB so that even with CONFIG_DEBUG_RODATA
47  * we retain large page mappings for boundaries spanning kernel text, rodata
48  * and data sections.
49  *
50  * However, kernel identity mappings will have different RWX permissions
51  * to the pages mapping to text and to the pages padding (which are freed) the
52  * text section. Hence kernel identity mappings will be broken to smaller
53  * pages. For 64-bit, kernel text and kernel identity mappings are different,
54  * so we can enable protection checks that come with CONFIG_DEBUG_RODATA,
55  * as well as retain 2MB large page mappings for kernel text.
56  */
57 #define X64_ALIGN_DEBUG_RODATA_BEGIN    . = ALIGN(HPAGE_SIZE);
58
59 #define X64_ALIGN_DEBUG_RODATA_END                              \
60                 . = ALIGN(HPAGE_SIZE);                          \
61                 __end_rodata_hpage_align = .;
62
63 #else
64
65 #define X64_ALIGN_DEBUG_RODATA_BEGIN
66 #define X64_ALIGN_DEBUG_RODATA_END
67
68 #endif
69
70 PHDRS {
71         text PT_LOAD FLAGS(5);          /* R_E */
72         data PT_LOAD FLAGS(6);          /* RW_ */
73 #ifdef CONFIG_X86_64
74 #ifdef CONFIG_SMP
75         percpu PT_LOAD FLAGS(6);        /* RW_ */
76 #endif
77         init PT_LOAD FLAGS(7);          /* RWE */
78 #endif
79         note PT_NOTE FLAGS(0);          /* ___ */
80 }
81
82 SECTIONS
83 {
84 #ifdef CONFIG_X86_32
85         . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
86         phys_startup_32 = startup_32 - LOAD_OFFSET;
87 #else
88         . = __START_KERNEL;
89         phys_startup_64 = startup_64 - LOAD_OFFSET;
90 #endif
91
92         /* Text and read-only data */
93         .text :  AT(ADDR(.text) - LOAD_OFFSET) {
94                 _text = .;
95                 /* bootstrapping code */
96                 HEAD_TEXT
97                 . = ALIGN(8);
98                 _stext = .;
99                 TEXT_TEXT
100                 SCHED_TEXT
101                 LOCK_TEXT
102                 KPROBES_TEXT
103                 ENTRY_TEXT
104                 IRQENTRY_TEXT
105                 *(.fixup)
106                 *(.gnu.warning)
107                 /* End of text section */
108                 _etext = .;
109         } :text = 0x9090
110
111         NOTES :text :note
112
113         EXCEPTION_TABLE(16) :text = 0x9090
114
115 #if defined(CONFIG_DEBUG_RODATA)
116         /* .text should occupy whole number of pages */
117         . = ALIGN(PAGE_SIZE);
118 #endif
119         X64_ALIGN_DEBUG_RODATA_BEGIN
120         RO_DATA(PAGE_SIZE)
121         X64_ALIGN_DEBUG_RODATA_END
122
123         /* Data */
124         .data : AT(ADDR(.data) - LOAD_OFFSET) {
125                 /* Start of data section */
126                 _sdata = .;
127
128                 /* init_task */
129                 INIT_TASK_DATA(THREAD_SIZE)
130
131 #ifdef CONFIG_X86_32
132                 /* 32 bit has nosave before _edata */
133                 NOSAVE_DATA
134 #endif
135
136                 PAGE_ALIGNED_DATA(PAGE_SIZE)
137
138                 CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
139
140                 DATA_DATA
141                 CONSTRUCTORS
142
143                 /* rarely changed data like cpu maps */
144                 READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
145
146                 /* End of data section */
147                 _edata = .;
148         } :data
149
150
151         . = ALIGN(PAGE_SIZE);
152         __vvar_page = .;
153
154         .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
155                 /* work around gold bug 13023 */
156                 __vvar_beginning_hack = .;
157
158                 /* Place all vvars at the offsets in asm/vvar.h. */
159 #define EMIT_VVAR(name, offset)                         \
160                 . = __vvar_beginning_hack + offset;     \
161                 *(.vvar_ ## name)
162 #define __VVAR_KERNEL_LDS
163 #include <asm/vvar.h>
164 #undef __VVAR_KERNEL_LDS
165 #undef EMIT_VVAR
166
167                 /*
168                  * Pad the rest of the page with zeros.  Otherwise the loader
169                  * can leave garbage here.
170                  */
171                 . = __vvar_beginning_hack + PAGE_SIZE;
172         } :data
173
174        . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
175
176         /* Init code and data - will be freed after init */
177         . = ALIGN(PAGE_SIZE);
178         .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
179                 __init_begin = .; /* paired with __init_end */
180         }
181
182 #if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
183         /*
184          * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
185          * output PHDR, so the next output section - .init.text - should
186          * start another segment - init.
187          */
188         PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
189 #endif
190
191         INIT_TEXT_SECTION(PAGE_SIZE)
192 #ifdef CONFIG_X86_64
193         :init
194 #endif
195
196         INIT_DATA_SECTION(16)
197
198         .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
199                 __x86_cpu_dev_start = .;
200                 *(.x86_cpu_dev.init)
201                 __x86_cpu_dev_end = .;
202         }
203
204 #ifdef CONFIG_X86_INTEL_MID
205         .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
206                                                                 LOAD_OFFSET) {
207                 __x86_intel_mid_dev_start = .;
208                 *(.x86_intel_mid_dev.init)
209                 __x86_intel_mid_dev_end = .;
210         }
211 #endif
212
213         /*
214          * start address and size of operations which during runtime
215          * can be patched with virtualization friendly instructions or
216          * baremetal native ones. Think page table operations.
217          * Details in paravirt_types.h
218          */
219         . = ALIGN(8);
220         .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
221                 __parainstructions = .;
222                 *(.parainstructions)
223                 __parainstructions_end = .;
224         }
225
226         /*
227          * struct alt_inst entries. From the header (alternative.h):
228          * "Alternative instructions for different CPU types or capabilities"
229          * Think locking instructions on spinlocks.
230          */
231         . = ALIGN(8);
232         .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
233                 __alt_instructions = .;
234                 *(.altinstructions)
235                 __alt_instructions_end = .;
236         }
237
238         /*
239          * And here are the replacement instructions. The linker sticks
240          * them as binary blobs. The .altinstructions has enough data to
241          * get the address and the length of them to patch the kernel safely.
242          */
243         .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
244                 *(.altinstr_replacement)
245         }
246
247         /*
248          * struct iommu_table_entry entries are injected in this section.
249          * It is an array of IOMMUs which during run time gets sorted depending
250          * on its dependency order. After rootfs_initcall is complete
251          * this section can be safely removed.
252          */
253         .iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
254                 __iommu_table = .;
255                 *(.iommu_table)
256                 __iommu_table_end = .;
257         }
258
259         . = ALIGN(8);
260         .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
261                 __apicdrivers = .;
262                 *(.apicdrivers);
263                 __apicdrivers_end = .;
264         }
265
266         . = ALIGN(8);
267         /*
268          * .exit.text is discard at runtime, not link time, to deal with
269          *  references from .altinstructions and .eh_frame
270          */
271         .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
272                 EXIT_TEXT
273         }
274
275         .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
276                 EXIT_DATA
277         }
278
279 #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
280         PERCPU_SECTION(INTERNODE_CACHE_BYTES)
281 #endif
282
283         . = ALIGN(PAGE_SIZE);
284
285         /* freed after init ends here */
286         .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
287                 __init_end = .;
288         }
289
290         /*
291          * smp_locks might be freed after init
292          * start/end must be page aligned
293          */
294         . = ALIGN(PAGE_SIZE);
295         .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
296                 __smp_locks = .;
297                 *(.smp_locks)
298                 . = ALIGN(PAGE_SIZE);
299                 __smp_locks_end = .;
300         }
301
302 #ifdef CONFIG_X86_64
303         .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
304                 NOSAVE_DATA
305         }
306 #endif
307
308         /* BSS */
309         . = ALIGN(PAGE_SIZE);
310         .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
311                 __bss_start = .;
312                 *(.bss..page_aligned)
313                 *(.bss)
314                 . = ALIGN(PAGE_SIZE);
315                 __bss_stop = .;
316         }
317
318         . = ALIGN(PAGE_SIZE);
319         .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
320                 __brk_base = .;
321                 . += 64 * 1024;         /* 64k alignment slop space */
322                 *(.brk_reservation)     /* areas brk users have reserved */
323                 __brk_limit = .;
324         }
325
326         _end = .;
327
328         STABS_DEBUG
329         DWARF_DEBUG
330
331         /* Sections to be discarded */
332         DISCARDS
333         /DISCARD/ : { *(.eh_frame) }
334 }
335
336
337 #ifdef CONFIG_X86_32
338 /*
339  * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
340  */
341 . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
342            "kernel image bigger than KERNEL_IMAGE_SIZE");
343 #else
344 /*
345  * Per-cpu symbols which need to be offset from __per_cpu_load
346  * for the boot processor.
347  */
348 #define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
349 INIT_PER_CPU(gdt_page);
350 INIT_PER_CPU(irq_stack_union);
351
352 /*
353  * Build-time check on the image size:
354  */
355 . = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
356            "kernel image bigger than KERNEL_IMAGE_SIZE");
357
358 #ifdef CONFIG_SMP
359 . = ASSERT((irq_stack_union == 0),
360            "irq_stack_union is not at start of per-cpu area");
361 #endif
362
363 #endif /* CONFIG_X86_32 */
364
365 #ifdef CONFIG_KEXEC
366 #include <asm/kexec.h>
367
368 . = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
369            "kexec control code size is too big");
370 #endif
371