drivers/acpi/acpica/dbinput.c

   1 /*******************************************************************************
   2  *
   3  * Module Name: dbinput - user front-end to the AML debugger
   4  *
   5  ******************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acdebug.h"
  47
  48 #ifdef ACPI_APPLICATION
  49 #include "acapps.h"
  50 #endif
  51
  52 #define _COMPONENT          ACPI_CA_DEBUGGER
  53 ACPI_MODULE_NAME("dbinput")
  54
  55 /* Local prototypes */
  56 static u32 acpi_db_get_line(char *input_buffer);
  57
  58 static u32 acpi_db_match_command(char *user_command);
  59
  60 static void acpi_db_display_command_info(const char *command, u8 display_all);
  61
  62 static void acpi_db_display_help(char *command);
  63
  64 static u8
  65 acpi_db_match_command_help(const char *command,
  66                            const struct acpi_db_command_help *help);
  67
  68 /*
  69  * Top-level debugger commands.
  70  *
  71  * This list of commands must match the string table below it
  72  */
  73 enum acpi_ex_debugger_commands {
  74         CMD_NOT_FOUND = 0,
  75         CMD_NULL,
  76         CMD_ALLOCATIONS,
  77         CMD_ARGS,
  78         CMD_ARGUMENTS,
  79         CMD_BREAKPOINT,
  80         CMD_BUSINFO,
  81         CMD_CALL,
  82         CMD_DEBUG,
  83         CMD_DISASSEMBLE,
  84         CMD_DISASM,
  85         CMD_DUMP,
  86         CMD_EVALUATE,
  87         CMD_EXECUTE,
  88         CMD_EXIT,
  89         CMD_FIND,
  90         CMD_GO,
  91         CMD_HANDLERS,
  92         CMD_HELP,
  93         CMD_HELP2,
  94         CMD_HISTORY,
  95         CMD_HISTORY_EXE,
  96         CMD_HISTORY_LAST,
  97         CMD_INFORMATION,
  98         CMD_INTEGRITY,
  99         CMD_INTO,
 100         CMD_LEVEL,
 101         CMD_LIST,
 102         CMD_LOCALS,
 103         CMD_LOCKS,
 104         CMD_METHODS,
 105         CMD_NAMESPACE,
 106         CMD_NOTIFY,
 107         CMD_OBJECTS,
 108         CMD_OSI,
 109         CMD_OWNER,
 110         CMD_PATHS,
 111         CMD_PREDEFINED,
 112         CMD_PREFIX,
 113         CMD_QUIT,
 114         CMD_REFERENCES,
 115         CMD_RESOURCES,
 116         CMD_RESULTS,
 117         CMD_SET,
 118         CMD_STATS,
 119         CMD_STOP,
 120         CMD_TABLES,
 121         CMD_TEMPLATE,
 122         CMD_TRACE,
 123         CMD_TREE,
 124         CMD_TYPE,
 125 #ifdef ACPI_APPLICATION
 126         CMD_ENABLEACPI,
 127         CMD_EVENT,
 128         CMD_GPE,
 129         CMD_GPES,
 130         CMD_SCI,
 131         CMD_SLEEP,
 132
 133         CMD_CLOSE,
 134         CMD_LOAD,
 135         CMD_OPEN,
 136         CMD_UNLOAD,
 137
 138         CMD_TERMINATE,
 139         CMD_THREADS,
 140
 141         CMD_TEST,
 142 #endif
 143 };
 144
 145 #define CMD_FIRST_VALID     2
 146
 147 /* Second parameter is the required argument count */
 148
 149 static const struct acpi_db_command_info acpi_gbl_db_commands[] = {
 150         {"<NOT FOUND>", 0},
 151         {"<NULL>", 0},
 152         {"ALLOCATIONS", 0},
 153         {"ARGS", 0},
 154         {"ARGUMENTS", 0},
 155         {"BREAKPOINT", 1},
 156         {"BUSINFO", 0},
 157         {"CALL", 0},
 158         {"DEBUG", 1},
 159         {"DISASSEMBLE", 1},
 160         {"DISASM", 1},
 161         {"DUMP", 1},
 162         {"EVALUATE", 1},
 163         {"EXECUTE", 1},
 164         {"EXIT", 0},
 165         {"FIND", 1},
 166         {"GO", 0},
 167         {"HANDLERS", 0},
 168         {"HELP", 0},
 169         {"?", 0},
 170         {"HISTORY", 0},
 171         {"!", 1},
 172         {"!!", 0},
 173         {"INFORMATION", 0},
 174         {"INTEGRITY", 0},
 175         {"INTO", 0},
 176         {"LEVEL", 0},
 177         {"LIST", 0},
 178         {"LOCALS", 0},
 179         {"LOCKS", 0},
 180         {"METHODS", 0},
 181         {"NAMESPACE", 0},
 182         {"NOTIFY", 2},
 183         {"OBJECTS", 0},
 184         {"OSI", 0},
 185         {"OWNER", 1},
 186         {"PATHS", 0},
 187         {"PREDEFINED", 0},
 188         {"PREFIX", 0},
 189         {"QUIT", 0},
 190         {"REFERENCES", 1},
 191         {"RESOURCES", 0},
 192         {"RESULTS", 0},
 193         {"SET", 3},
 194         {"STATS", 1},
 195         {"STOP", 0},
 196         {"TABLES", 0},
 197         {"TEMPLATE", 1},
 198         {"TRACE", 1},
 199         {"TREE", 0},
 200         {"TYPE", 1},
 201 #ifdef ACPI_APPLICATION
 202         {"ENABLEACPI", 0},
 203         {"EVENT", 1},
 204         {"GPE", 1},
 205         {"GPES", 0},
 206         {"SCI", 0},
 207         {"SLEEP", 0},
 208
 209         {"CLOSE", 0},
 210         {"LOAD", 1},
 211         {"OPEN", 1},
 212         {"UNLOAD", 1},
 213
 214         {"TERMINATE", 0},
 215         {"THREADS", 3},
 216
 217         {"TEST", 1},
 218 #endif
 219         {NULL, 0}
 220 };
 221
 222 /*
 223  * Help for all debugger commands. First argument is the number of lines
 224  * of help to output for the command.
 225  */
 226 static const struct acpi_db_command_help acpi_gbl_db_command_help[] = {
 227         {0, "\nGeneral-Purpose Commands:", "\n"},
 228         {1, "  Allocations", "Display list of current memory allocations\n"},
 229         {2, "  Dump <Address>|<Namepath>", "\n"},
 230         {0, "       [Byte|Word|Dword|Qword]",
 231          "Display ACPI objects or memory\n"},
 232         {1, "  Handlers", "Info about global handlers\n"},
 233         {1, "  Help [Command]", "This help screen or individual command\n"},
 234         {1, "  History", "Display command history buffer\n"},
 235         {1, "  Level <DebugLevel>] [console]",
 236          "Get/Set debug level for file or console\n"},
 237         {1, "  Locks", "Current status of internal mutexes\n"},
 238         {1, "  Osi [Install|Remove <name>]",
 239          "Display or modify global _OSI list\n"},
 240         {1, "  Quit or Exit", "Exit this command\n"},
 241         {8, "  Stats <SubCommand>",
 242          "Display namespace and memory statistics\n"},
 243         {1, "     Allocations", "Display list of current memory allocations\n"},
 244         {1, "     Memory", "Dump internal memory lists\n"},
 245         {1, "     Misc", "Namespace search and mutex stats\n"},
 246         {1, "     Objects", "Summary of namespace objects\n"},
 247         {1, "     Sizes", "Sizes for each of the internal objects\n"},
 248         {1, "     Stack", "Display CPU stack usage\n"},
 249         {1, "     Tables", "Info about current ACPI table(s)\n"},
 250         {1, "  Tables", "Display info about loaded ACPI tables\n"},
 251         {1, "  ! <CommandNumber>", "Execute command from history buffer\n"},
 252         {1, "  !!", "Execute last command again\n"},
 253
 254         {0, "\nNamespace Access Commands:", "\n"},
 255         {1, "  Businfo", "Display system bus info\n"},
 256         {1, "  Disassemble <Method>", "Disassemble a control method\n"},
 257         {1, "  Find <AcpiName> (? is wildcard)",
 258          "Find ACPI name(s) with wildcards\n"},
 259         {1, "  Integrity", "Validate namespace integrity\n"},
 260         {1, "  Methods", "Display list of loaded control methods\n"},
 261         {1, "  Namespace [Object] [Depth]",
 262          "Display loaded namespace tree/subtree\n"},
 263         {1, "  Notify <Object> <Value>", "Send a notification on Object\n"},
 264         {1, "  Objects [ObjectType]",
 265          "Display summary of all objects or just given type\n"},
 266         {1, "  Owner <OwnerId> [Depth]",
 267          "Display loaded namespace by object owner\n"},
 268         {1, "  Paths", "Display full pathnames of namespace objects\n"},
 269         {1, "  Predefined", "Check all predefined names\n"},
 270         {1, "  Prefix [<Namepath>]", "Set or Get current execution prefix\n"},
 271         {1, "  References <Addr>", "Find all references to object at addr\n"},
 272         {1, "  Resources [DeviceName]",
 273          "Display Device resources (no arg = all devices)\n"},
 274         {1, "  Set N <NamedObject> <Value>", "Set value for named integer\n"},
 275         {1, "  Template <Object>", "Format/dump a Buffer/ResourceTemplate\n"},
 276         {1, "  Type <Object>", "Display object type\n"},
 277
 278         {0, "\nControl Method Execution Commands:", "\n"},
 279         {1, "  Arguments (or Args)", "Display method arguments\n"},
 280         {1, "  Breakpoint <AmlOffset>", "Set an AML execution breakpoint\n"},
 281         {1, "  Call", "Run to next control method invocation\n"},
 282         {1, "  Debug <Namepath> [Arguments]", "Single Step a control method\n"},
 283         {6, "  Evaluate", "Synonym for Execute\n"},
 284         {5, "  Execute <Namepath> [Arguments]", "Execute control method\n"},
 285         {1, "     Hex Integer", "Integer method argument\n"},
 286         {1, "     \"Ascii String\"", "String method argument\n"},
 287         {1, "     (Hex Byte List)", "Buffer method argument\n"},
 288         {1, "     [Package Element List]", "Package method argument\n"},
 289         {5, "  Execute predefined",
 290          "Execute all predefined (public) methods\n"},
 291         {1, "  Go", "Allow method to run to completion\n"},
 292         {1, "  Information", "Display info about the current method\n"},
 293         {1, "  Into", "Step into (not over) a method call\n"},
 294         {1, "  List [# of Aml Opcodes]", "Display method ASL statements\n"},
 295         {1, "  Locals", "Display method local variables\n"},
 296         {1, "  Results", "Display method result stack\n"},
 297         {1, "  Set <A|L> <#> <Value>", "Set method data (Arguments/Locals)\n"},
 298         {1, "  Stop", "Terminate control method\n"},
 299         {5, "  Trace <State> [<Namepath>] [Once]",
 300          "Trace control method execution\n"},
 301         {1, "     Enable", "Enable all messages\n"},
 302         {1, "     Disable", "Disable tracing\n"},
 303         {1, "     Method", "Enable method execution messages\n"},
 304         {1, "     Opcode", "Enable opcode execution messages\n"},
 305         {1, "  Tree", "Display control method calling tree\n"},
 306         {1, "  <Enter>", "Single step next AML opcode (over calls)\n"},
 307
 308 #ifdef ACPI_APPLICATION
 309         {0, "\nHardware Simulation Commands:", "\n"},
 310         {1, "  EnableAcpi", "Enable ACPI (hardware) mode\n"},
 311         {1, "  Event <F|G> <Value>", "Generate AcpiEvent (Fixed/GPE)\n"},
 312         {1, "  Gpe <GpeNum> [GpeBlockDevice]", "Simulate a GPE\n"},
 313         {1, "  Gpes", "Display info on all GPE devices\n"},
 314         {1, "  Sci", "Generate an SCI\n"},
 315         {1, "  Sleep [SleepState]", "Simulate sleep/wake sequence(s) (0-5)\n"},
 316
 317         {0, "\nFile I/O Commands:", "\n"},
 318         {1, "  Close", "Close debug output file\n"},
 319         {1, "  Load <Input Filename>", "Load ACPI table from a file\n"},
 320         {1, "  Open <Output Filename>", "Open a file for debug output\n"},
 321         {1, "  Unload <Namepath>",
 322          "Unload an ACPI table via namespace object\n"},
 323
 324         {0, "\nUser Space Commands:", "\n"},
 325         {1, "  Terminate", "Delete namespace and all internal objects\n"},
 326         {1, "  Thread <Threads><Loops><NamePath>",
 327          "Spawn threads to execute method(s)\n"},
 328
 329         {0, "\nDebug Test Commands:", "\n"},
 330         {3, "  Test <TestName>", "Invoke a debug test\n"},
 331         {1, "     Objects", "Read/write/compare all namespace data objects\n"},
 332         {1, "     Predefined",
 333          "Execute all ACPI predefined names (_STA, etc.)\n"},
 334 #endif
 335         {0, NULL, NULL}
 336 };
 337
 338 /*******************************************************************************
 339  *
 340  * FUNCTION:    acpi_db_match_command_help
 341  *
 342  * PARAMETERS:  command             - Command string to match
 343  *              help                - Help table entry to attempt match
 344  *
 345  * RETURN:      TRUE if command matched, FALSE otherwise
 346  *
 347  * DESCRIPTION: Attempt to match a command in the help table in order to
 348  *              print help information for a single command.
 349  *
 350  ******************************************************************************/
 351
 352 static u8
 353 acpi_db_match_command_help(const char *command,
 354                            const struct acpi_db_command_help *help)
 355 {
 356         char *invocation = help->invocation;
 357         u32 line_count;
 358
 359         /* Valid commands in the help table begin with a couple of spaces */
 360
 361         if (*invocation != ' ') {
 362                 return (FALSE);
 363         }
 364
 365         while (*invocation == ' ') {
 366                 invocation++;
 367         }
 368
 369         /* Match command name (full command or substring) */
 370
 371         while ((*command) && (*invocation) && (*invocation != ' ')) {
 372                 if (tolower((int)*command) != tolower((int)*invocation)) {
 373                         return (FALSE);
 374                 }
 375
 376                 invocation++;
 377                 command++;
 378         }
 379
 380         /* Print the appropriate number of help lines */
 381
 382         line_count = help->line_count;
 383         while (line_count) {
 384                 acpi_os_printf("%-38s : %s", help->invocation,
 385                                help->description);
 386                 help++;
 387                 line_count--;
 388         }
 389
 390         return (TRUE);
 391 }
 392
 393 /*******************************************************************************
 394  *
 395  * FUNCTION:    acpi_db_display_command_info
 396  *
 397  * PARAMETERS:  command             - Command string to match
 398  *              display_all         - Display all matching commands, or just
 399  *                                    the first one (substring match)
 400  *
 401  * RETURN:      None
 402  *
 403  * DESCRIPTION: Display help information for a Debugger command.
 404  *
 405  ******************************************************************************/
 406
 407 static void acpi_db_display_command_info(const char *command, u8 display_all)
 408 {
 409         const struct acpi_db_command_help *next;
 410         u8 matched;
 411
 412         next = acpi_gbl_db_command_help;
 413         while (next->invocation) {
 414                 matched = acpi_db_match_command_help(command, next);
 415                 if (!display_all && matched) {
 416                         return;
 417                 }
 418
 419                 next++;
 420         }
 421 }
 422
 423 /*******************************************************************************
 424  *
 425  * FUNCTION:    acpi_db_display_help
 426  *
 427  * PARAMETERS:  command             - Optional command string to display help.
 428  *                                    if not specified, all debugger command
 429  *                                    help strings are displayed
 430  *
 431  * RETURN:      None
 432  *
 433  * DESCRIPTION: Display help for a single debugger command, or all of them.
 434  *
 435  ******************************************************************************/
 436
 437 static void acpi_db_display_help(char *command)
 438 {
 439         const struct acpi_db_command_help *next = acpi_gbl_db_command_help;
 440
 441         if (!command) {
 442
 443                 /* No argument to help, display help for all commands */
 444
 445                 while (next->invocation) {
 446                         acpi_os_printf("%-38s%s", next->invocation,
 447                                        next->description);
 448                         next++;
 449                 }
 450         } else {
 451                 /* Display help for all commands that match the subtring */
 452
 453                 acpi_db_display_command_info(command, TRUE);
 454         }
 455 }
 456
 457 /*******************************************************************************
 458  *
 459  * FUNCTION:    acpi_db_get_next_token
 460  *
 461  * PARAMETERS:  string          - Command buffer
 462  *              next            - Return value, end of next token
 463  *
 464  * RETURN:      Pointer to the start of the next token.
 465  *
 466  * DESCRIPTION: Command line parsing. Get the next token on the command line
 467  *
 468  ******************************************************************************/
 469
 470 char *acpi_db_get_next_token(char *string,
 471                              char **next, acpi_object_type *return_type)
 472 {
 473         char *start;
 474         u32 depth;
 475         acpi_object_type type = ACPI_TYPE_INTEGER;
 476
 477         /* At end of buffer? */
 478
 479         if (!string || !(*string)) {
 480                 return (NULL);
 481         }
 482
 483         /* Remove any spaces at the beginning */
 484
 485         if (*string == ' ') {
 486                 while (*string && (*string == ' ')) {
 487                         string++;
 488                 }
 489
 490                 if (!(*string)) {
 491                         return (NULL);
 492                 }
 493         }
 494
 495         switch (*string) {
 496         case '"':
 497
 498                 /* This is a quoted string, scan until closing quote */
 499
 500                 string++;
 501                 start = string;
 502                 type = ACPI_TYPE_STRING;
 503
 504                 /* Find end of string */
 505
 506                 while (*string && (*string != '"')) {
 507                         string++;
 508                 }
 509                 break;
 510
 511         case '(':
 512
 513                 /* This is the start of a buffer, scan until closing paren */
 514
 515                 string++;
 516                 start = string;
 517                 type = ACPI_TYPE_BUFFER;
 518
 519                 /* Find end of buffer */
 520
 521                 while (*string && (*string != ')')) {
 522                         string++;
 523                 }
 524                 break;
 525
 526         case '[':
 527
 528                 /* This is the start of a package, scan until closing bracket */
 529
 530                 string++;
 531                 depth = 1;
 532                 start = string;
 533                 type = ACPI_TYPE_PACKAGE;
 534
 535                 /* Find end of package (closing bracket) */
 536
 537                 while (*string) {
 538
 539                         /* Handle String package elements */
 540
 541                         if (*string == '"') {
 542                                 /* Find end of string */
 543
 544                                 string++;
 545                                 while (*string && (*string != '"')) {
 546                                         string++;
 547                                 }
 548                                 if (!(*string)) {
 549                                         break;
 550                                 }
 551                         } else if (*string == '[') {
 552                                 depth++;        /* A nested package declaration */
 553                         } else if (*string == ']') {
 554                                 depth--;
 555                                 if (depth == 0) {       /* Found final package closing bracket */
 556                                         break;
 557                                 }
 558                         }
 559
 560                         string++;
 561                 }
 562                 break;
 563
 564         default:
 565
 566                 start = string;
 567
 568                 /* Find end of token */
 569
 570                 while (*string && (*string != ' ')) {
 571                         string++;
 572                 }
 573                 break;
 574         }
 575
 576         if (!(*string)) {
 577                 *next = NULL;
 578         } else {
 579                 *string = 0;
 580                 *next = string + 1;
 581         }
 582
 583         *return_type = type;
 584         return (start);
 585 }
 586
 587 /*******************************************************************************
 588  *
 589  * FUNCTION:    acpi_db_get_line
 590  *
 591  * PARAMETERS:  input_buffer        - Command line buffer
 592  *
 593  * RETURN:      Count of arguments to the command
 594  *
 595  * DESCRIPTION: Get the next command line from the user. Gets entire line
 596  *              up to the next newline
 597  *
 598  ******************************************************************************/
 599
 600 static u32 acpi_db_get_line(char *input_buffer)
 601 {
 602         u32 i;
 603         u32 count;
 604         char *next;
 605         char *this;
 606
 607         if (acpi_ut_safe_strcpy
 608             (acpi_gbl_db_parsed_buf, sizeof(acpi_gbl_db_parsed_buf),
 609              input_buffer)) {
 610                 acpi_os_printf
 611                     ("Buffer overflow while parsing input line (max %u characters)\n",
 612                      sizeof(acpi_gbl_db_parsed_buf));
 613                 return (0);
 614         }
 615
 616         this = acpi_gbl_db_parsed_buf;
 617         for (i = 0; i < ACPI_DEBUGGER_MAX_ARGS; i++) {
 618                 acpi_gbl_db_args[i] = acpi_db_get_next_token(this, &next,
 619                                                              &acpi_gbl_db_arg_types
 620                                                              [i]);
 621                 if (!acpi_gbl_db_args[i]) {
 622                         break;
 623                 }
 624
 625                 this = next;
 626         }
 627
 628         /* Uppercase the actual command */
 629
 630         acpi_ut_strupr(acpi_gbl_db_args[0]);
 631
 632         count = i;
 633         if (count) {
 634                 count--;        /* Number of args only */
 635         }
 636
 637         return (count);
 638 }
 639
 640 /*******************************************************************************
 641  *
 642  * FUNCTION:    acpi_db_match_command
 643  *
 644  * PARAMETERS:  user_command            - User command line
 645  *
 646  * RETURN:      Index into command array, -1 if not found
 647  *
 648  * DESCRIPTION: Search command array for a command match
 649  *
 650  ******************************************************************************/
 651
 652 static u32 acpi_db_match_command(char *user_command)
 653 {
 654         u32 i;
 655
 656         if (!user_command || user_command[0] == 0) {
 657                 return (CMD_NULL);
 658         }
 659
 660         for (i = CMD_FIRST_VALID; acpi_gbl_db_commands[i].name; i++) {
 661                 if (strstr
 662                     (ACPI_CAST_PTR(char, acpi_gbl_db_commands[i].name),
 663                      user_command) == acpi_gbl_db_commands[i].name) {
 664                         return (i);
 665                 }
 666         }
 667
 668         /* Command not recognized */
 669
 670         return (CMD_NOT_FOUND);
 671 }
 672
 673 /*******************************************************************************
 674  *
 675  * FUNCTION:    acpi_db_command_dispatch
 676  *
 677  * PARAMETERS:  input_buffer        - Command line buffer
 678  *              walk_state          - Current walk
 679  *              op                  - Current (executing) parse op
 680  *
 681  * RETURN:      Status
 682  *
 683  * DESCRIPTION: Command dispatcher.
 684  *
 685  ******************************************************************************/
 686
 687 acpi_status
 688 acpi_db_command_dispatch(char *input_buffer,
 689                          struct acpi_walk_state *walk_state,
 690                          union acpi_parse_object *op)
 691 {
 692         u32 temp;
 693         u32 command_index;
 694         u32 param_count;
 695         char *command_line;
 696         acpi_status status = AE_CTRL_TRUE;
 697
 698         /* If acpi_terminate has been called, terminate this thread */
 699
 700         if (acpi_gbl_db_terminate_loop) {
 701                 return (AE_CTRL_TERMINATE);
 702         }
 703
 704         /* Find command and add to the history buffer */
 705
 706         param_count = acpi_db_get_line(input_buffer);
 707         command_index = acpi_db_match_command(acpi_gbl_db_args[0]);
 708         temp = 0;
 709
 710         /*
 711          * We don't want to add the !! command to the history buffer. It
 712          * would cause an infinite loop because it would always be the
 713          * previous command.
 714          */
 715         if (command_index != CMD_HISTORY_LAST) {
 716                 acpi_db_add_to_history(input_buffer);
 717         }
 718
 719         /* Verify that we have the minimum number of params */
 720
 721         if (param_count < acpi_gbl_db_commands[command_index].min_args) {
 722                 acpi_os_printf
 723                     ("%u parameters entered, [%s] requires %u parameters\n",
 724                      param_count, acpi_gbl_db_commands[command_index].name,
 725                      acpi_gbl_db_commands[command_index].min_args);
 726
 727                 acpi_db_display_command_info(acpi_gbl_db_commands
 728                                              [command_index].name, FALSE);
 729                 return (AE_CTRL_TRUE);
 730         }
 731
 732         /* Decode and dispatch the command */
 733
 734         switch (command_index) {
 735         case CMD_NULL:
 736
 737                 if (op) {
 738                         return (AE_OK);
 739                 }
 740                 break;
 741
 742         case CMD_ALLOCATIONS:
 743
 744 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
 745                 acpi_ut_dump_allocations((u32)-1, NULL);
 746 #endif
 747                 break;
 748
 749         case CMD_ARGS:
 750         case CMD_ARGUMENTS:
 751
 752                 acpi_db_display_arguments();
 753                 break;
 754
 755         case CMD_BREAKPOINT:
 756
 757                 acpi_db_set_method_breakpoint(acpi_gbl_db_args[1], walk_state,
 758                                               op);
 759                 break;
 760
 761         case CMD_BUSINFO:
 762
 763                 acpi_db_get_bus_info();
 764                 break;
 765
 766         case CMD_CALL:
 767
 768                 acpi_db_set_method_call_breakpoint(op);
 769                 status = AE_OK;
 770                 break;
 771
 772         case CMD_DEBUG:
 773
 774                 acpi_db_execute(acpi_gbl_db_args[1],
 775                                 &acpi_gbl_db_args[2], &acpi_gbl_db_arg_types[2],
 776                                 EX_SINGLE_STEP);
 777                 break;
 778
 779         case CMD_DISASSEMBLE:
 780         case CMD_DISASM:
 781
 782                 (void)acpi_db_disassemble_method(acpi_gbl_db_args[1]);
 783                 break;
 784
 785         case CMD_DUMP:
 786
 787                 acpi_db_decode_and_display_object(acpi_gbl_db_args[1],
 788                                                   acpi_gbl_db_args[2]);
 789                 break;
 790
 791         case CMD_EVALUATE:
 792         case CMD_EXECUTE:
 793
 794                 acpi_db_execute(acpi_gbl_db_args[1],
 795                                 &acpi_gbl_db_args[2], &acpi_gbl_db_arg_types[2],
 796                                 EX_NO_SINGLE_STEP);
 797                 break;
 798
 799         case CMD_FIND:
 800
 801                 status = acpi_db_find_name_in_namespace(acpi_gbl_db_args[1]);
 802                 break;
 803
 804         case CMD_GO:
 805
 806                 acpi_gbl_cm_single_step = FALSE;
 807                 return (AE_OK);
 808
 809         case CMD_HANDLERS:
 810
 811                 acpi_db_display_handlers();
 812                 break;
 813
 814         case CMD_HELP:
 815         case CMD_HELP2:
 816
 817                 acpi_db_display_help(acpi_gbl_db_args[1]);
 818                 break;
 819
 820         case CMD_HISTORY:
 821
 822                 acpi_db_display_history();
 823                 break;
 824
 825         case CMD_HISTORY_EXE:   /* ! command */
 826
 827                 command_line = acpi_db_get_from_history(acpi_gbl_db_args[1]);
 828                 if (!command_line) {
 829                         return (AE_CTRL_TRUE);
 830                 }
 831
 832                 status = acpi_db_command_dispatch(command_line, walk_state, op);
 833                 return (status);
 834
 835         case CMD_HISTORY_LAST:  /* !! command */
 836
 837                 command_line = acpi_db_get_from_history(NULL);
 838                 if (!command_line) {
 839                         return (AE_CTRL_TRUE);
 840                 }
 841
 842                 status = acpi_db_command_dispatch(command_line, walk_state, op);
 843                 return (status);
 844
 845         case CMD_INFORMATION:
 846
 847                 acpi_db_display_method_info(op);
 848                 break;
 849
 850         case CMD_INTEGRITY:
 851
 852                 acpi_db_check_integrity();
 853                 break;
 854
 855         case CMD_INTO:
 856
 857                 if (op) {
 858                         acpi_gbl_cm_single_step = TRUE;
 859                         return (AE_OK);
 860                 }
 861                 break;
 862
 863         case CMD_LEVEL:
 864
 865                 if (param_count == 0) {
 866                         acpi_os_printf
 867                             ("Current debug level for file output is:    %8.8lX\n",
 868                              acpi_gbl_db_debug_level);
 869                         acpi_os_printf
 870                             ("Current debug level for console output is: %8.8lX\n",
 871                              acpi_gbl_db_console_debug_level);
 872                 } else if (param_count == 2) {
 873                         temp = acpi_gbl_db_console_debug_level;
 874                         acpi_gbl_db_console_debug_level =
 875                             strtoul(acpi_gbl_db_args[1], NULL, 16);
 876                         acpi_os_printf
 877                             ("Debug Level for console output was %8.8lX, now %8.8lX\n",
 878                              temp, acpi_gbl_db_console_debug_level);
 879                 } else {
 880                         temp = acpi_gbl_db_debug_level;
 881                         acpi_gbl_db_debug_level =
 882                             strtoul(acpi_gbl_db_args[1], NULL, 16);
 883                         acpi_os_printf
 884                             ("Debug Level for file output was %8.8lX, now %8.8lX\n",
 885                              temp, acpi_gbl_db_debug_level);
 886                 }
 887                 break;
 888
 889         case CMD_LIST:
 890
 891                 acpi_db_disassemble_aml(acpi_gbl_db_args[1], op);
 892                 break;
 893
 894         case CMD_LOCKS:
 895
 896                 acpi_db_display_locks();
 897                 break;
 898
 899         case CMD_LOCALS:
 900
 901                 acpi_db_display_locals();
 902                 break;
 903
 904         case CMD_METHODS:
 905
 906                 status = acpi_db_display_objects("METHOD", acpi_gbl_db_args[1]);
 907                 break;
 908
 909         case CMD_NAMESPACE:
 910
 911                 acpi_db_dump_namespace(acpi_gbl_db_args[1],
 912                                        acpi_gbl_db_args[2]);
 913                 break;
 914
 915         case CMD_NOTIFY:
 916
 917                 temp = strtoul(acpi_gbl_db_args[2], NULL, 0);
 918                 acpi_db_send_notify(acpi_gbl_db_args[1], temp);
 919                 break;
 920
 921         case CMD_OBJECTS:
 922
 923                 acpi_ut_strupr(acpi_gbl_db_args[1]);
 924                 status =
 925                     acpi_db_display_objects(acpi_gbl_db_args[1],
 926                                             acpi_gbl_db_args[2]);
 927                 break;
 928
 929         case CMD_OSI:
 930
 931                 acpi_db_display_interfaces(acpi_gbl_db_args[1],
 932                                            acpi_gbl_db_args[2]);
 933                 break;
 934
 935         case CMD_OWNER:
 936
 937                 acpi_db_dump_namespace_by_owner(acpi_gbl_db_args[1],
 938                                                 acpi_gbl_db_args[2]);
 939                 break;
 940
 941         case CMD_PATHS:
 942
 943                 acpi_db_dump_namespace_paths();
 944                 break;
 945
 946         case CMD_PREFIX:
 947
 948                 acpi_db_set_scope(acpi_gbl_db_args[1]);
 949                 break;
 950
 951         case CMD_REFERENCES:
 952
 953                 acpi_db_find_references(acpi_gbl_db_args[1]);
 954                 break;
 955
 956         case CMD_RESOURCES:
 957
 958                 acpi_db_display_resources(acpi_gbl_db_args[1]);
 959                 break;
 960
 961         case CMD_RESULTS:
 962
 963                 acpi_db_display_results();
 964                 break;
 965
 966         case CMD_SET:
 967
 968                 acpi_db_set_method_data(acpi_gbl_db_args[1],
 969                                         acpi_gbl_db_args[2],
 970                                         acpi_gbl_db_args[3]);
 971                 break;
 972
 973         case CMD_STATS:
 974
 975                 status = acpi_db_display_statistics(acpi_gbl_db_args[1]);
 976                 break;
 977
 978         case CMD_STOP:
 979
 980                 return (AE_NOT_IMPLEMENTED);
 981
 982         case CMD_TABLES:
 983
 984                 acpi_db_display_table_info(acpi_gbl_db_args[1]);
 985                 break;
 986
 987         case CMD_TEMPLATE:
 988
 989                 acpi_db_display_template(acpi_gbl_db_args[1]);
 990                 break;
 991
 992         case CMD_TRACE:
 993
 994                 acpi_db_trace(acpi_gbl_db_args[1], acpi_gbl_db_args[2],
 995                               acpi_gbl_db_args[3]);
 996                 break;
 997
 998         case CMD_TREE:
 999
1000                 acpi_db_display_calling_tree();
1001                 break;
1002
1003         case CMD_TYPE:
1004
1005                 acpi_db_display_object_type(acpi_gbl_db_args[1]);
1006                 break;
1007
1008 #ifdef ACPI_APPLICATION
1009
1010                 /* Hardware simulation commands. */
1011
1012         case CMD_ENABLEACPI:
1013 #if (!ACPI_REDUCED_HARDWARE)
1014
1015                 status = acpi_enable();
1016                 if (ACPI_FAILURE(status)) {
1017                         acpi_os_printf("AcpiEnable failed (Status=%X)\n",
1018                                        status);
1019                         return (status);
1020                 }
1021 #endif                          /* !ACPI_REDUCED_HARDWARE */
1022                 break;
1023
1024         case CMD_EVENT:
1025
1026                 acpi_os_printf("Event command not implemented\n");
1027                 break;
1028
1029         case CMD_GPE:
1030
1031                 acpi_db_generate_gpe(acpi_gbl_db_args[1], acpi_gbl_db_args[2]);
1032                 break;
1033
1034         case CMD_GPES:
1035
1036                 acpi_db_display_gpes();
1037                 break;
1038
1039         case CMD_SCI:
1040
1041                 acpi_db_generate_sci();
1042                 break;
1043
1044         case CMD_SLEEP:
1045
1046                 status = acpi_db_sleep(acpi_gbl_db_args[1]);
1047                 break;
1048
1049                 /* File I/O commands. */
1050
1051         case CMD_CLOSE:
1052
1053                 acpi_db_close_debug_file();
1054                 break;
1055
1056         case CMD_LOAD:{
1057                         struct acpi_new_table_desc *list_head = NULL;
1058
1059                         status =
1060                             ac_get_all_tables_from_file(acpi_gbl_db_args[1],
1061                                                         ACPI_GET_ALL_TABLES,
1062                                                         &list_head);
1063                         if (ACPI_SUCCESS(status)) {
1064                                 acpi_db_load_tables(list_head);
1065                         }
1066                 }
1067                 break;
1068
1069         case CMD_OPEN:
1070
1071                 acpi_db_open_debug_file(acpi_gbl_db_args[1]);
1072                 break;
1073
1074                 /* User space commands. */
1075
1076         case CMD_TERMINATE:
1077
1078                 acpi_db_set_output_destination(ACPI_DB_REDIRECTABLE_OUTPUT);
1079                 acpi_ut_subsystem_shutdown();
1080
1081                 /*
1082                  * TBD: [Restructure] Need some way to re-initialize without
1083                  * re-creating the semaphores!
1084                  */
1085
1086                 acpi_gbl_db_terminate_loop = TRUE;
1087                 /*  acpi_initialize (NULL); */
1088                 break;
1089
1090         case CMD_THREADS:
1091
1092                 acpi_db_create_execution_threads(acpi_gbl_db_args[1],
1093                                                  acpi_gbl_db_args[2],
1094                                                  acpi_gbl_db_args[3]);
1095                 break;
1096
1097                 /* Debug test commands. */
1098
1099         case CMD_PREDEFINED:
1100
1101                 acpi_db_check_predefined_names();
1102                 break;
1103
1104         case CMD_TEST:
1105
1106                 acpi_db_execute_test(acpi_gbl_db_args[1]);
1107                 break;
1108
1109         case CMD_UNLOAD:
1110
1111                 acpi_db_unload_acpi_table(acpi_gbl_db_args[1]);
1112                 break;
1113 #endif
1114
1115         case CMD_EXIT:
1116         case CMD_QUIT:
1117
1118                 if (op) {
1119                         acpi_os_printf("Method execution terminated\n");
1120                         return (AE_CTRL_TERMINATE);
1121                 }
1122
1123                 if (!acpi_gbl_db_output_to_file) {
1124                         acpi_dbg_level = ACPI_DEBUG_DEFAULT;
1125                 }
1126 #ifdef ACPI_APPLICATION
1127                 acpi_db_close_debug_file();
1128 #endif
1129                 acpi_gbl_db_terminate_loop = TRUE;
1130                 return (AE_CTRL_TERMINATE);
1131
1132         case CMD_NOT_FOUND:
1133         default:
1134
1135                 acpi_os_printf("%s: unknown command\n", acpi_gbl_db_args[0]);
1136                 return (AE_CTRL_TRUE);
1137         }
1138
1139         if (ACPI_SUCCESS(status)) {
1140                 status = AE_CTRL_TRUE;
1141         }
1142
1143         return (status);
1144 }
1145
1146 /*******************************************************************************
1147  *
1148  * FUNCTION:    acpi_db_execute_thread
1149  *
1150  * PARAMETERS:  context         - Not used
1151  *
1152  * RETURN:      None
1153  *
1154  * DESCRIPTION: Debugger execute thread. Waits for a command line, then
1155  *              simply dispatches it.
1156  *
1157  ******************************************************************************/
1158
1159 void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context)
1160 {
1161
1162         (void)acpi_db_user_commands();
1163         acpi_gbl_db_threads_terminated = TRUE;
1164 }
1165
1166 /*******************************************************************************
1167  *
1168  * FUNCTION:    acpi_db_user_commands
1169  *
1170  * PARAMETERS:  None
1171  *
1172  * RETURN:      None
1173  *
1174  * DESCRIPTION: Command line execution for the AML debugger. Commands are
1175  *              matched and dispatched here.
1176  *
1177  ******************************************************************************/
1178
1179 acpi_status acpi_db_user_commands(void)
1180 {
1181         acpi_status status = AE_OK;
1182
1183         acpi_os_printf("\n");
1184
1185         /* TBD: [Restructure] Need a separate command line buffer for step mode */
1186
1187         while (!acpi_gbl_db_terminate_loop) {
1188
1189                 /* Wait the readiness of the command */
1190
1191                 status = acpi_os_wait_command_ready();
1192                 if (ACPI_FAILURE(status)) {
1193                         break;
1194                 }
1195
1196                 /* Just call to the command line interpreter */
1197
1198                 acpi_gbl_method_executing = FALSE;
1199                 acpi_gbl_step_to_next_call = FALSE;
1200
1201                 (void)acpi_db_command_dispatch(acpi_gbl_db_line_buf, NULL,
1202                                                NULL);
1203
1204                 /* Notify the completion of the command */
1205
1206                 status = acpi_os_notify_command_complete();
1207                 if (ACPI_FAILURE(status)) {
1208                         break;
1209                 }
1210         }
1211
1212         if (ACPI_FAILURE(status) && status != AE_CTRL_TERMINATE) {
1213                 ACPI_EXCEPTION((AE_INFO, status, "While parsing command line"));
1214         }
1215         return (status);
1216 }