drivers/acpi/acpica/evxfgpe.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs)
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2014, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #define EXPORT_ACPI_INTERFACES
  45
  46 #include <acpi/acpi.h>
  47 #include "accommon.h"
  48 #include "acevents.h"
  49 #include "acnamesp.h"
  50
  51 #define _COMPONENT          ACPI_EVENTS
  52 ACPI_MODULE_NAME("evxfgpe")
  53
  54 #if (!ACPI_REDUCED_HARDWARE)    /* Entire module */
  55 /*******************************************************************************
  56  *
  57  * FUNCTION:    acpi_update_all_gpes
  58  *
  59  * PARAMETERS:  None
  60  *
  61  * RETURN:      Status
  62  *
  63  * DESCRIPTION: Complete GPE initialization and enable all GPEs that have
  64  *              associated _Lxx or _Exx methods and are not pointed to by any
  65  *              device _PRW methods (this indicates that these GPEs are
  66  *              generally intended for system or device wakeup. Such GPEs
  67  *              have to be enabled directly when the devices whose _PRW
  68  *              methods point to them are set up for wakeup signaling.)
  69  *
  70  * NOTE: Should be called after any GPEs are added to the system. Primarily,
  71  * after the system _PRW methods have been run, but also after a GPE Block
  72  * Device has been added or if any new GPE methods have been added via a
  73  * dynamic table load.
  74  *
  75  ******************************************************************************/
  76
  77 acpi_status acpi_update_all_gpes(void)
  78 {
  79         acpi_status status;
  80
  81         ACPI_FUNCTION_TRACE(acpi_update_all_gpes);
  82
  83         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
  84         if (ACPI_FAILURE(status)) {
  85                 return_ACPI_STATUS(status);
  86         }
  87
  88         if (acpi_gbl_all_gpes_initialized) {
  89                 goto unlock_and_exit;
  90         }
  91
  92         status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL);
  93         if (ACPI_SUCCESS(status)) {
  94                 acpi_gbl_all_gpes_initialized = TRUE;
  95         }
  96
  97 unlock_and_exit:
  98         (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
  99
 100         return_ACPI_STATUS(status);
 101 }
 102
 103 ACPI_EXPORT_SYMBOL(acpi_update_all_gpes)
 104
 105 /*******************************************************************************
 106  *
 107  * FUNCTION:    acpi_enable_gpe
 108  *
 109  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 110  *              gpe_number      - GPE level within the GPE block
 111  *
 112  * RETURN:      Status
 113  *
 114  * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
 115  *              hardware-enabled.
 116  *
 117  ******************************************************************************/
 118
 119 acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
 120 {
 121         acpi_status status = AE_BAD_PARAMETER;
 122         struct acpi_gpe_event_info *gpe_event_info;
 123         acpi_cpu_flags flags;
 124
 125         ACPI_FUNCTION_TRACE(acpi_enable_gpe);
 126
 127         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 128
 129         /*
 130          * Ensure that we have a valid GPE number and that there is some way
 131          * of handling the GPE (handler or a GPE method). In other words, we
 132          * won't allow a valid GPE to be enabled if there is no way to handle it.
 133          */
 134         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 135         if (gpe_event_info) {
 136                 if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) !=
 137                     ACPI_GPE_DISPATCH_NONE) {
 138                         status = acpi_ev_add_gpe_reference(gpe_event_info);
 139                 } else {
 140                         status = AE_NO_HANDLER;
 141                 }
 142         }
 143
 144         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 145         return_ACPI_STATUS(status);
 146 }
 147 ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
 148
 149 /*******************************************************************************
 150  *
 151  * FUNCTION:    acpi_disable_gpe
 152  *
 153  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 154  *              gpe_number      - GPE level within the GPE block
 155  *
 156  * RETURN:      Status
 157  *
 158  * DESCRIPTION: Remove a reference to a GPE. When the last reference is
 159  *              removed, only then is the GPE disabled (for runtime GPEs), or
 160  *              the GPE mask bit disabled (for wake GPEs)
 161  *
 162  ******************************************************************************/
 163
 164 acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
 165 {
 166         acpi_status status = AE_BAD_PARAMETER;
 167         struct acpi_gpe_event_info *gpe_event_info;
 168         acpi_cpu_flags flags;
 169
 170         ACPI_FUNCTION_TRACE(acpi_disable_gpe);
 171
 172         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 173
 174         /* Ensure that we have a valid GPE number */
 175
 176         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 177         if (gpe_event_info) {
 178                 status = acpi_ev_remove_gpe_reference(gpe_event_info) ;
 179         }
 180
 181         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 182         return_ACPI_STATUS(status);
 183 }
 184
 185 ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
 186
 187
 188 /*******************************************************************************
 189  *
 190  * FUNCTION:    acpi_mark_gpe_for_wake
 191  *
 192  * PARAMETERS:  gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 193  *              gpe_number          - GPE level within the GPE block
 194  *
 195  * RETURN:      Status
 196  *
 197  * DESCRIPTION: Mark a GPE as having the ability to wake the system. Simply
 198  *              sets the ACPI_GPE_CAN_WAKE flag.
 199  *
 200  * Some potential callers of acpi_setup_gpe_for_wake may know in advance that
 201  * there won't be any notify handlers installed for device wake notifications
 202  * from the given GPE (one example is a button GPE in Linux). For these cases,
 203  * acpi_mark_gpe_for_wake should be used instead of acpi_setup_gpe_for_wake.
 204  * This will set the ACPI_GPE_CAN_WAKE flag for the GPE without trying to
 205  * setup implicit wake notification for it (since there's no handler method).
 206  *
 207  ******************************************************************************/
 208 acpi_status acpi_mark_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number)
 209 {
 210         struct acpi_gpe_event_info *gpe_event_info;
 211         acpi_status status = AE_BAD_PARAMETER;
 212         acpi_cpu_flags flags;
 213
 214         ACPI_FUNCTION_TRACE(acpi_mark_gpe_for_wake);
 215
 216         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 217
 218         /* Ensure that we have a valid GPE number */
 219
 220         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 221         if (gpe_event_info) {
 222
 223                 /* Mark the GPE as a possible wake event */
 224
 225                 gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
 226                 status = AE_OK;
 227         }
 228
 229         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 230         return_ACPI_STATUS(status);
 231 }
 232
 233 ACPI_EXPORT_SYMBOL(acpi_mark_gpe_for_wake)
 234
 235 /*******************************************************************************
 236  *
 237  * FUNCTION:    acpi_setup_gpe_for_wake
 238  *
 239  * PARAMETERS:  wake_device         - Device associated with the GPE (via _PRW)
 240  *              gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 241  *              gpe_number          - GPE level within the GPE block
 242  *
 243  * RETURN:      Status
 244  *
 245  * DESCRIPTION: Mark a GPE as having the ability to wake the system. This
 246  *              interface is intended to be used as the host executes the
 247  *              _PRW methods (Power Resources for Wake) in the system tables.
 248  *              Each _PRW appears under a Device Object (The wake_device), and
 249  *              contains the info for the wake GPE associated with the
 250  *              wake_device.
 251  *
 252  ******************************************************************************/
 253 acpi_status
 254 acpi_setup_gpe_for_wake(acpi_handle wake_device,
 255                         acpi_handle gpe_device, u32 gpe_number)
 256 {
 257         acpi_status status;
 258         struct acpi_gpe_event_info *gpe_event_info;
 259         struct acpi_namespace_node *device_node;
 260         struct acpi_gpe_notify_info *notify;
 261         struct acpi_gpe_notify_info *new_notify;
 262         acpi_cpu_flags flags;
 263
 264         ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
 265
 266         /* Parameter Validation */
 267
 268         if (!wake_device) {
 269                 /*
 270                  * By forcing wake_device to be valid, we automatically enable the
 271                  * implicit notify feature on all hosts.
 272                  */
 273                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 274         }
 275
 276         /* Handle root object case */
 277
 278         if (wake_device == ACPI_ROOT_OBJECT) {
 279                 device_node = acpi_gbl_root_node;
 280         } else {
 281                 device_node =
 282                     ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
 283         }
 284
 285         /* Validate wake_device is of type Device */
 286
 287         if (device_node->type != ACPI_TYPE_DEVICE) {
 288                 return_ACPI_STATUS (AE_BAD_PARAMETER);
 289         }
 290
 291         /*
 292          * Allocate a new notify object up front, in case it is needed.
 293          * Memory allocation while holding a spinlock is a big no-no
 294          * on some hosts.
 295          */
 296         new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info));
 297         if (!new_notify) {
 298                 return_ACPI_STATUS(AE_NO_MEMORY);
 299         }
 300
 301         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 302
 303         /* Ensure that we have a valid GPE number */
 304
 305         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 306         if (!gpe_event_info) {
 307                 status = AE_BAD_PARAMETER;
 308                 goto unlock_and_exit;
 309         }
 310
 311         /*
 312          * If there is no method or handler for this GPE, then the
 313          * wake_device will be notified whenever this GPE fires. This is
 314          * known as an "implicit notify". Note: The GPE is assumed to be
 315          * level-triggered (for windows compatibility).
 316          */
 317         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 318             ACPI_GPE_DISPATCH_NONE) {
 319                 /*
 320                  * This is the first device for implicit notify on this GPE.
 321                  * Just set the flags here, and enter the NOTIFY block below.
 322                  */
 323                 gpe_event_info->flags =
 324                     (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
 325         }
 326
 327         /*
 328          * If we already have an implicit notify on this GPE, add
 329          * this device to the notify list.
 330          */
 331         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 332             ACPI_GPE_DISPATCH_NOTIFY) {
 333
 334                 /* Ensure that the device is not already in the list */
 335
 336                 notify = gpe_event_info->dispatch.notify_list;
 337                 while (notify) {
 338                         if (notify->device_node == device_node) {
 339                                 status = AE_ALREADY_EXISTS;
 340                                 goto unlock_and_exit;
 341                         }
 342                         notify = notify->next;
 343                 }
 344
 345                 /* Add this device to the notify list for this GPE */
 346
 347                 new_notify->device_node = device_node;
 348                 new_notify->next = gpe_event_info->dispatch.notify_list;
 349                 gpe_event_info->dispatch.notify_list = new_notify;
 350                 new_notify = NULL;
 351         }
 352
 353         /* Mark the GPE as a possible wake event */
 354
 355         gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
 356         status = AE_OK;
 357
 358 unlock_and_exit:
 359         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 360
 361         /* Delete the notify object if it was not used above */
 362
 363         if (new_notify) {
 364                 ACPI_FREE(new_notify);
 365         }
 366         return_ACPI_STATUS(status);
 367 }
 368 ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
 369
 370 /*******************************************************************************
 371  *
 372  * FUNCTION:    acpi_set_gpe_wake_mask
 373  *
 374  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 375  *              gpe_number      - GPE level within the GPE block
 376  *              action              - Enable or Disable
 377  *
 378  * RETURN:      Status
 379  *
 380  * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
 381  *              already be marked as a WAKE GPE.
 382  *
 383  ******************************************************************************/
 384
 385 acpi_status
 386 acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
 387 {
 388         acpi_status status = AE_OK;
 389         struct acpi_gpe_event_info *gpe_event_info;
 390         struct acpi_gpe_register_info *gpe_register_info;
 391         acpi_cpu_flags flags;
 392         u32 register_bit;
 393
 394         ACPI_FUNCTION_TRACE(acpi_set_gpe_wake_mask);
 395
 396         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 397
 398         /*
 399          * Ensure that we have a valid GPE number and that this GPE is in
 400          * fact a wake GPE
 401          */
 402         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 403         if (!gpe_event_info) {
 404                 status = AE_BAD_PARAMETER;
 405                 goto unlock_and_exit;
 406         }
 407
 408         if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
 409                 status = AE_TYPE;
 410                 goto unlock_and_exit;
 411         }
 412
 413         gpe_register_info = gpe_event_info->register_info;
 414         if (!gpe_register_info) {
 415                 status = AE_NOT_EXIST;
 416                 goto unlock_and_exit;
 417         }
 418
 419         register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 420
 421         /* Perform the action */
 422
 423         switch (action) {
 424         case ACPI_GPE_ENABLE:
 425
 426                 ACPI_SET_BIT(gpe_register_info->enable_for_wake,
 427                              (u8)register_bit);
 428                 break;
 429
 430         case ACPI_GPE_DISABLE:
 431
 432                 ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
 433                                (u8)register_bit);
 434                 break;
 435
 436         default:
 437
 438                 ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
 439                 status = AE_BAD_PARAMETER;
 440                 break;
 441         }
 442
 443 unlock_and_exit:
 444         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 445         return_ACPI_STATUS(status);
 446 }
 447
 448 ACPI_EXPORT_SYMBOL(acpi_set_gpe_wake_mask)
 449
 450 /*******************************************************************************
 451  *
 452  * FUNCTION:    acpi_clear_gpe
 453  *
 454  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 455  *              gpe_number      - GPE level within the GPE block
 456  *
 457  * RETURN:      Status
 458  *
 459  * DESCRIPTION: Clear an ACPI event (general purpose)
 460  *
 461  ******************************************************************************/
 462 acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number)
 463 {
 464         acpi_status status = AE_OK;
 465         struct acpi_gpe_event_info *gpe_event_info;
 466         acpi_cpu_flags flags;
 467
 468         ACPI_FUNCTION_TRACE(acpi_clear_gpe);
 469
 470         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 471
 472         /* Ensure that we have a valid GPE number */
 473
 474         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 475         if (!gpe_event_info) {
 476                 status = AE_BAD_PARAMETER;
 477                 goto unlock_and_exit;
 478         }
 479
 480         status = acpi_hw_clear_gpe(gpe_event_info);
 481
 482       unlock_and_exit:
 483         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 484         return_ACPI_STATUS(status);
 485 }
 486
 487 ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
 488
 489 /*******************************************************************************
 490  *
 491  * FUNCTION:    acpi_get_gpe_status
 492  *
 493  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 494  *              gpe_number      - GPE level within the GPE block
 495  *              event_status        - Where the current status of the event
 496  *                                    will be returned
 497  *
 498  * RETURN:      Status
 499  *
 500  * DESCRIPTION: Get the current status of a GPE (signalled/not_signalled)
 501  *
 502  ******************************************************************************/
 503 acpi_status
 504 acpi_get_gpe_status(acpi_handle gpe_device,
 505                     u32 gpe_number, acpi_event_status *event_status)
 506 {
 507         acpi_status status = AE_OK;
 508         struct acpi_gpe_event_info *gpe_event_info;
 509         acpi_cpu_flags flags;
 510
 511         ACPI_FUNCTION_TRACE(acpi_get_gpe_status);
 512
 513         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 514
 515         /* Ensure that we have a valid GPE number */
 516
 517         gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 518         if (!gpe_event_info) {
 519                 status = AE_BAD_PARAMETER;
 520                 goto unlock_and_exit;
 521         }
 522
 523         /* Obtain status on the requested GPE number */
 524
 525         status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
 526
 527         if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
 528                 *event_status |= ACPI_EVENT_FLAG_HANDLE;
 529
 530 unlock_and_exit:
 531         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 532         return_ACPI_STATUS(status);
 533 }
 534
 535 ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
 536
 537 /******************************************************************************
 538  *
 539  * FUNCTION:    acpi_disable_all_gpes
 540  *
 541  * PARAMETERS:  None
 542  *
 543  * RETURN:      Status
 544  *
 545  * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
 546  *
 547  ******************************************************************************/
 548
 549 acpi_status acpi_disable_all_gpes(void)
 550 {
 551         acpi_status status;
 552
 553         ACPI_FUNCTION_TRACE(acpi_disable_all_gpes);
 554
 555         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
 556         if (ACPI_FAILURE(status)) {
 557                 return_ACPI_STATUS(status);
 558         }
 559
 560         status = acpi_hw_disable_all_gpes();
 561         (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 562
 563         return_ACPI_STATUS(status);
 564 }
 565
 566 ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes)
 567
 568 /******************************************************************************
 569  *
 570  * FUNCTION:    acpi_enable_all_runtime_gpes
 571  *
 572  * PARAMETERS:  None
 573  *
 574  * RETURN:      Status
 575  *
 576  * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
 577  *
 578  ******************************************************************************/
 579
 580 acpi_status acpi_enable_all_runtime_gpes(void)
 581 {
 582         acpi_status status;
 583
 584         ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes);
 585
 586         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
 587         if (ACPI_FAILURE(status)) {
 588                 return_ACPI_STATUS(status);
 589         }
 590
 591         status = acpi_hw_enable_all_runtime_gpes();
 592         (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 593
 594         return_ACPI_STATUS(status);
 595 }
 596
 597 ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes)
 598
 599 /******************************************************************************
 600  *
 601  * FUNCTION:    acpi_enable_all_wakeup_gpes
 602  *
 603  * PARAMETERS:  None
 604  *
 605  * RETURN:      Status
 606  *
 607  * DESCRIPTION: Enable all "wakeup" GPEs and disable all of the other GPEs, in
 608  *              all GPE blocks.
 609  *
 610  ******************************************************************************/
 611
 612 acpi_status acpi_enable_all_wakeup_gpes(void)
 613 {
 614         acpi_status status;
 615
 616         ACPI_FUNCTION_TRACE(acpi_enable_all_wakeup_gpes);
 617
 618         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
 619         if (ACPI_FAILURE(status)) {
 620                 return_ACPI_STATUS(status);
 621         }
 622
 623         status = acpi_hw_enable_all_wakeup_gpes();
 624         (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 625
 626         return_ACPI_STATUS(status);
 627 }
 628
 629 ACPI_EXPORT_SYMBOL(acpi_enable_all_wakeup_gpes)
 630
 631 /*******************************************************************************
 632  *
 633  * FUNCTION:    acpi_install_gpe_block
 634  *
 635  * PARAMETERS:  gpe_device          - Handle to the parent GPE Block Device
 636  *              gpe_block_address   - Address and space_ID
 637  *              register_count      - Number of GPE register pairs in the block
 638  *              interrupt_number    - H/W interrupt for the block
 639  *
 640  * RETURN:      Status
 641  *
 642  * DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not
 643  *              enabled here.
 644  *
 645  ******************************************************************************/
 646 acpi_status
 647 acpi_install_gpe_block(acpi_handle gpe_device,
 648                        struct acpi_generic_address *gpe_block_address,
 649                        u32 register_count, u32 interrupt_number)
 650 {
 651         acpi_status status;
 652         union acpi_operand_object *obj_desc;
 653         struct acpi_namespace_node *node;
 654         struct acpi_gpe_block_info *gpe_block;
 655
 656         ACPI_FUNCTION_TRACE(acpi_install_gpe_block);
 657
 658         if ((!gpe_device) || (!gpe_block_address) || (!register_count)) {
 659                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 660         }
 661
 662         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 663         if (ACPI_FAILURE(status)) {
 664                 return_ACPI_STATUS(status);
 665         }
 666
 667         node = acpi_ns_validate_handle(gpe_device);
 668         if (!node) {
 669                 status = AE_BAD_PARAMETER;
 670                 goto unlock_and_exit;
 671         }
 672
 673         /* Validate the parent device */
 674
 675         if (node->type != ACPI_TYPE_DEVICE) {
 676                 status = AE_TYPE;
 677                 goto unlock_and_exit;
 678         }
 679
 680         if (node->object) {
 681                 status = AE_ALREADY_EXISTS;
 682                 goto unlock_and_exit;
 683         }
 684
 685         /*
 686          * For user-installed GPE Block Devices, the gpe_block_base_number
 687          * is always zero
 688          */
 689         status = acpi_ev_create_gpe_block(node, gpe_block_address->address,
 690                                           gpe_block_address->space_id,
 691                                           register_count, 0, interrupt_number,
 692                                           &gpe_block);
 693         if (ACPI_FAILURE(status)) {
 694                 goto unlock_and_exit;
 695         }
 696
 697         /* Install block in the device_object attached to the node */
 698
 699         obj_desc = acpi_ns_get_attached_object(node);
 700         if (!obj_desc) {
 701
 702                 /*
 703                  * No object, create a new one (Device nodes do not always have
 704                  * an attached object)
 705                  */
 706                 obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE);
 707                 if (!obj_desc) {
 708                         status = AE_NO_MEMORY;
 709                         goto unlock_and_exit;
 710                 }
 711
 712                 status =
 713                     acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE);
 714
 715                 /* Remove local reference to the object */
 716
 717                 acpi_ut_remove_reference(obj_desc);
 718
 719                 if (ACPI_FAILURE(status)) {
 720                         goto unlock_and_exit;
 721                 }
 722         }
 723
 724         /* Now install the GPE block in the device_object */
 725
 726         obj_desc->device.gpe_block = gpe_block;
 727
 728 unlock_and_exit:
 729         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 730         return_ACPI_STATUS(status);
 731 }
 732
 733 ACPI_EXPORT_SYMBOL(acpi_install_gpe_block)
 734
 735 /*******************************************************************************
 736  *
 737  * FUNCTION:    acpi_remove_gpe_block
 738  *
 739  * PARAMETERS:  gpe_device          - Handle to the parent GPE Block Device
 740  *
 741  * RETURN:      Status
 742  *
 743  * DESCRIPTION: Remove a previously installed block of GPE registers
 744  *
 745  ******************************************************************************/
 746 acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
 747 {
 748         union acpi_operand_object *obj_desc;
 749         acpi_status status;
 750         struct acpi_namespace_node *node;
 751
 752         ACPI_FUNCTION_TRACE(acpi_remove_gpe_block);
 753
 754         if (!gpe_device) {
 755                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 756         }
 757
 758         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 759         if (ACPI_FAILURE(status)) {
 760                 return_ACPI_STATUS(status);
 761         }
 762
 763         node = acpi_ns_validate_handle(gpe_device);
 764         if (!node) {
 765                 status = AE_BAD_PARAMETER;
 766                 goto unlock_and_exit;
 767         }
 768
 769         /* Validate the parent device */
 770
 771         if (node->type != ACPI_TYPE_DEVICE) {
 772                 status = AE_TYPE;
 773                 goto unlock_and_exit;
 774         }
 775
 776         /* Get the device_object attached to the node */
 777
 778         obj_desc = acpi_ns_get_attached_object(node);
 779         if (!obj_desc || !obj_desc->device.gpe_block) {
 780                 return_ACPI_STATUS(AE_NULL_OBJECT);
 781         }
 782
 783         /* Delete the GPE block (but not the device_object) */
 784
 785         status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block);
 786         if (ACPI_SUCCESS(status)) {
 787                 obj_desc->device.gpe_block = NULL;
 788         }
 789
 790 unlock_and_exit:
 791         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 792         return_ACPI_STATUS(status);
 793 }
 794
 795 ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)
 796
 797 /*******************************************************************************
 798  *
 799  * FUNCTION:    acpi_get_gpe_device
 800  *
 801  * PARAMETERS:  index               - System GPE index (0-current_gpe_count)
 802  *              gpe_device          - Where the parent GPE Device is returned
 803  *
 804  * RETURN:      Status
 805  *
 806  * DESCRIPTION: Obtain the GPE device associated with the input index. A NULL
 807  *              gpe device indicates that the gpe number is contained in one of
 808  *              the FADT-defined gpe blocks. Otherwise, the GPE block device.
 809  *
 810  ******************************************************************************/
 811 acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
 812 {
 813         struct acpi_gpe_device_info info;
 814         acpi_status status;
 815
 816         ACPI_FUNCTION_TRACE(acpi_get_gpe_device);
 817
 818         if (!gpe_device) {
 819                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 820         }
 821
 822         if (index >= acpi_current_gpe_count) {
 823                 return_ACPI_STATUS(AE_NOT_EXIST);
 824         }
 825
 826         /* Setup and walk the GPE list */
 827
 828         info.index = index;
 829         info.status = AE_NOT_EXIST;
 830         info.gpe_device = NULL;
 831         info.next_block_base_index = 0;
 832
 833         status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info);
 834         if (ACPI_FAILURE(status)) {
 835                 return_ACPI_STATUS(status);
 836         }
 837
 838         *gpe_device = ACPI_CAST_PTR(acpi_handle, info.gpe_device);
 839         return_ACPI_STATUS(info.status);
 840 }
 841
 842 ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
 843 #endif                          /* !ACPI_REDUCED_HARDWARE */