drivers/acpi/acpica/exconvrt.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exconvrt - Object conversion routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2015, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acinterp.h"
  47 #include "amlcode.h"
  48
  49 #define _COMPONENT          ACPI_EXECUTER
  50 ACPI_MODULE_NAME("exconvrt")
  51
  52 /* Local prototypes */
  53 static u32
  54 acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length);
  55
  56 /*******************************************************************************
  57  *
  58  * FUNCTION:    acpi_ex_convert_to_integer
  59  *
  60  * PARAMETERS:  obj_desc        - Object to be converted. Must be an
  61  *                                Integer, Buffer, or String
  62  *              result_desc     - Where the new Integer object is returned
  63  *              flags           - Used for string conversion
  64  *
  65  * RETURN:      Status
  66  *
  67  * DESCRIPTION: Convert an ACPI Object to an integer.
  68  *
  69  ******************************************************************************/
  70
  71 acpi_status
  72 acpi_ex_convert_to_integer(union acpi_operand_object *obj_desc,
  73                            union acpi_operand_object **result_desc, u32 flags)
  74 {
  75         union acpi_operand_object *return_desc;
  76         u8 *pointer;
  77         u64 result;
  78         u32 i;
  79         u32 count;
  80         acpi_status status;
  81
  82         ACPI_FUNCTION_TRACE_PTR(ex_convert_to_integer, obj_desc);
  83
  84         switch (obj_desc->common.type) {
  85         case ACPI_TYPE_INTEGER:
  86
  87                 /* No conversion necessary */
  88
  89                 *result_desc = obj_desc;
  90                 return_ACPI_STATUS(AE_OK);
  91
  92         case ACPI_TYPE_BUFFER:
  93         case ACPI_TYPE_STRING:
  94
  95                 /* Note: Takes advantage of common buffer/string fields */
  96
  97                 pointer = obj_desc->buffer.pointer;
  98                 count = obj_desc->buffer.length;
  99                 break;
 100
 101         default:
 102
 103                 return_ACPI_STATUS(AE_TYPE);
 104         }
 105
 106         /*
 107          * Convert the buffer/string to an integer. Note that both buffers and
 108          * strings are treated as raw data - we don't convert ascii to hex for
 109          * strings.
 110          *
 111          * There are two terminating conditions for the loop:
 112          * 1) The size of an integer has been reached, or
 113          * 2) The end of the buffer or string has been reached
 114          */
 115         result = 0;
 116
 117         /* String conversion is different than Buffer conversion */
 118
 119         switch (obj_desc->common.type) {
 120         case ACPI_TYPE_STRING:
 121                 /*
 122                  * Convert string to an integer - for most cases, the string must be
 123                  * hexadecimal as per the ACPI specification. The only exception (as
 124                  * of ACPI 3.0) is that the to_integer() operator allows both decimal
 125                  * and hexadecimal strings (hex prefixed with "0x").
 126                  */
 127                 status = acpi_ut_strtoul64((char *)pointer, flags, &result);
 128                 if (ACPI_FAILURE(status)) {
 129                         return_ACPI_STATUS(status);
 130                 }
 131                 break;
 132
 133         case ACPI_TYPE_BUFFER:
 134
 135                 /* Check for zero-length buffer */
 136
 137                 if (!count) {
 138                         return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
 139                 }
 140
 141                 /* Transfer no more than an integer's worth of data */
 142
 143                 if (count > acpi_gbl_integer_byte_width) {
 144                         count = acpi_gbl_integer_byte_width;
 145                 }
 146
 147                 /*
 148                  * Convert buffer to an integer - we simply grab enough raw data
 149                  * from the buffer to fill an integer
 150                  */
 151                 for (i = 0; i < count; i++) {
 152                         /*
 153                          * Get next byte and shift it into the Result.
 154                          * Little endian is used, meaning that the first byte of the buffer
 155                          * is the LSB of the integer
 156                          */
 157                         result |= (((u64) pointer[i]) << (i * 8));
 158                 }
 159                 break;
 160
 161         default:
 162
 163                 /* No other types can get here */
 164
 165                 break;
 166         }
 167
 168         /* Create a new integer */
 169
 170         return_desc = acpi_ut_create_integer_object(result);
 171         if (!return_desc) {
 172                 return_ACPI_STATUS(AE_NO_MEMORY);
 173         }
 174
 175         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
 176                           ACPI_FORMAT_UINT64(result)));
 177
 178         /* Save the Result */
 179
 180         (void)acpi_ex_truncate_for32bit_table(return_desc);
 181         *result_desc = return_desc;
 182         return_ACPI_STATUS(AE_OK);
 183 }
 184
 185 /*******************************************************************************
 186  *
 187  * FUNCTION:    acpi_ex_convert_to_buffer
 188  *
 189  * PARAMETERS:  obj_desc        - Object to be converted. Must be an
 190  *                                Integer, Buffer, or String
 191  *              result_desc     - Where the new buffer object is returned
 192  *
 193  * RETURN:      Status
 194  *
 195  * DESCRIPTION: Convert an ACPI Object to a Buffer
 196  *
 197  ******************************************************************************/
 198
 199 acpi_status
 200 acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc,
 201                           union acpi_operand_object **result_desc)
 202 {
 203         union acpi_operand_object *return_desc;
 204         u8 *new_buf;
 205
 206         ACPI_FUNCTION_TRACE_PTR(ex_convert_to_buffer, obj_desc);
 207
 208         switch (obj_desc->common.type) {
 209         case ACPI_TYPE_BUFFER:
 210
 211                 /* No conversion necessary */
 212
 213                 *result_desc = obj_desc;
 214                 return_ACPI_STATUS(AE_OK);
 215
 216         case ACPI_TYPE_INTEGER:
 217                 /*
 218                  * Create a new Buffer object.
 219                  * Need enough space for one integer
 220                  */
 221                 return_desc =
 222                     acpi_ut_create_buffer_object(acpi_gbl_integer_byte_width);
 223                 if (!return_desc) {
 224                         return_ACPI_STATUS(AE_NO_MEMORY);
 225                 }
 226
 227                 /* Copy the integer to the buffer, LSB first */
 228
 229                 new_buf = return_desc->buffer.pointer;
 230                 memcpy(new_buf, &obj_desc->integer.value,
 231                        acpi_gbl_integer_byte_width);
 232                 break;
 233
 234         case ACPI_TYPE_STRING:
 235                 /*
 236                  * Create a new Buffer object
 237                  * Size will be the string length
 238                  *
 239                  * NOTE: Add one to the string length to include the null terminator.
 240                  * The ACPI spec is unclear on this subject, but there is existing
 241                  * ASL/AML code that depends on the null being transferred to the new
 242                  * buffer.
 243                  */
 244                 return_desc = acpi_ut_create_buffer_object((acpi_size)
 245                                                            obj_desc->string.
 246                                                            length + 1);
 247                 if (!return_desc) {
 248                         return_ACPI_STATUS(AE_NO_MEMORY);
 249                 }
 250
 251                 /* Copy the string to the buffer */
 252
 253                 new_buf = return_desc->buffer.pointer;
 254                 strncpy((char *)new_buf, (char *)obj_desc->string.pointer,
 255                         obj_desc->string.length);
 256                 break;
 257
 258         default:
 259
 260                 return_ACPI_STATUS(AE_TYPE);
 261         }
 262
 263         /* Mark buffer initialized */
 264
 265         return_desc->common.flags |= AOPOBJ_DATA_VALID;
 266         *result_desc = return_desc;
 267         return_ACPI_STATUS(AE_OK);
 268 }
 269
 270 /*******************************************************************************
 271  *
 272  * FUNCTION:    acpi_ex_convert_to_ascii
 273  *
 274  * PARAMETERS:  integer         - Value to be converted
 275  *              base            - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
 276  *              string          - Where the string is returned
 277  *              data_width      - Size of data item to be converted, in bytes
 278  *
 279  * RETURN:      Actual string length
 280  *
 281  * DESCRIPTION: Convert an ACPI Integer to a hex or decimal string
 282  *
 283  ******************************************************************************/
 284
 285 static u32
 286 acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width)
 287 {
 288         u64 digit;
 289         u32 i;
 290         u32 j;
 291         u32 k = 0;
 292         u32 hex_length;
 293         u32 decimal_length;
 294         u32 remainder;
 295         u8 supress_zeros;
 296
 297         ACPI_FUNCTION_ENTRY();
 298
 299         switch (base) {
 300         case 10:
 301
 302                 /* Setup max length for the decimal number */
 303
 304                 switch (data_width) {
 305                 case 1:
 306
 307                         decimal_length = ACPI_MAX8_DECIMAL_DIGITS;
 308                         break;
 309
 310                 case 4:
 311
 312                         decimal_length = ACPI_MAX32_DECIMAL_DIGITS;
 313                         break;
 314
 315                 case 8:
 316                 default:
 317
 318                         decimal_length = ACPI_MAX64_DECIMAL_DIGITS;
 319                         break;
 320                 }
 321
 322                 supress_zeros = TRUE;   /* No leading zeros */
 323                 remainder = 0;
 324
 325                 for (i = decimal_length; i > 0; i--) {
 326
 327                         /* Divide by nth factor of 10 */
 328
 329                         digit = integer;
 330                         for (j = 0; j < i; j++) {
 331                                 (void)acpi_ut_short_divide(digit, 10, &digit,
 332                                                            &remainder);
 333                         }
 334
 335                         /* Handle leading zeros */
 336
 337                         if (remainder != 0) {
 338                                 supress_zeros = FALSE;
 339                         }
 340
 341                         if (!supress_zeros) {
 342                                 string[k] = (u8) (ACPI_ASCII_ZERO + remainder);
 343                                 k++;
 344                         }
 345                 }
 346                 break;
 347
 348         case 16:
 349
 350                 /* hex_length: 2 ascii hex chars per data byte */
 351
 352                 hex_length = ACPI_MUL_2(data_width);
 353                 for (i = 0, j = (hex_length - 1); i < hex_length; i++, j--) {
 354
 355                         /* Get one hex digit, most significant digits first */
 356
 357                         string[k] = (u8)
 358                             acpi_ut_hex_to_ascii_char(integer, ACPI_MUL_4(j));
 359                         k++;
 360                 }
 361                 break;
 362
 363         default:
 364                 return (0);
 365         }
 366
 367         /*
 368          * Since leading zeros are suppressed, we must check for the case where
 369          * the integer equals 0
 370          *
 371          * Finally, null terminate the string and return the length
 372          */
 373         if (!k) {
 374                 string[0] = ACPI_ASCII_ZERO;
 375                 k = 1;
 376         }
 377
 378         string[k] = 0;
 379         return ((u32) k);
 380 }
 381
 382 /*******************************************************************************
 383  *
 384  * FUNCTION:    acpi_ex_convert_to_string
 385  *
 386  * PARAMETERS:  obj_desc        - Object to be converted. Must be an
 387  *                                Integer, Buffer, or String
 388  *              result_desc     - Where the string object is returned
 389  *              type            - String flags (base and conversion type)
 390  *
 391  * RETURN:      Status
 392  *
 393  * DESCRIPTION: Convert an ACPI Object to a string
 394  *
 395  ******************************************************************************/
 396
 397 acpi_status
 398 acpi_ex_convert_to_string(union acpi_operand_object * obj_desc,
 399                           union acpi_operand_object ** result_desc, u32 type)
 400 {
 401         union acpi_operand_object *return_desc;
 402         u8 *new_buf;
 403         u32 i;
 404         u32 string_length = 0;
 405         u16 base = 16;
 406         u8 separator = ',';
 407
 408         ACPI_FUNCTION_TRACE_PTR(ex_convert_to_string, obj_desc);
 409
 410         switch (obj_desc->common.type) {
 411         case ACPI_TYPE_STRING:
 412
 413                 /* No conversion necessary */
 414
 415                 *result_desc = obj_desc;
 416                 return_ACPI_STATUS(AE_OK);
 417
 418         case ACPI_TYPE_INTEGER:
 419
 420                 switch (type) {
 421                 case ACPI_EXPLICIT_CONVERT_DECIMAL:
 422
 423                         /* Make room for maximum decimal number */
 424
 425                         string_length = ACPI_MAX_DECIMAL_DIGITS;
 426                         base = 10;
 427                         break;
 428
 429                 default:
 430
 431                         /* Two hex string characters for each integer byte */
 432
 433                         string_length = ACPI_MUL_2(acpi_gbl_integer_byte_width);
 434                         break;
 435                 }
 436
 437                 /*
 438                  * Create a new String
 439                  * Need enough space for one ASCII integer (plus null terminator)
 440                  */
 441                 return_desc =
 442                     acpi_ut_create_string_object((acpi_size) string_length);
 443                 if (!return_desc) {
 444                         return_ACPI_STATUS(AE_NO_MEMORY);
 445                 }
 446
 447                 new_buf = return_desc->buffer.pointer;
 448
 449                 /* Convert integer to string */
 450
 451                 string_length =
 452                     acpi_ex_convert_to_ascii(obj_desc->integer.value, base,
 453                                              new_buf,
 454                                              acpi_gbl_integer_byte_width);
 455
 456                 /* Null terminate at the correct place */
 457
 458                 return_desc->string.length = string_length;
 459                 new_buf[string_length] = 0;
 460                 break;
 461
 462         case ACPI_TYPE_BUFFER:
 463
 464                 /* Setup string length, base, and separator */
 465
 466                 switch (type) {
 467                 case ACPI_EXPLICIT_CONVERT_DECIMAL:     /* Used by to_decimal_string */
 468                         /*
 469                          * From ACPI: "If Data is a buffer, it is converted to a string of
 470                          * decimal values separated by commas."
 471                          */
 472                         base = 10;
 473
 474                         /*
 475                          * Calculate the final string length. Individual string values
 476                          * are variable length (include separator for each)
 477                          */
 478                         for (i = 0; i < obj_desc->buffer.length; i++) {
 479                                 if (obj_desc->buffer.pointer[i] >= 100) {
 480                                         string_length += 4;
 481                                 } else if (obj_desc->buffer.pointer[i] >= 10) {
 482                                         string_length += 3;
 483                                 } else {
 484                                         string_length += 2;
 485                                 }
 486                         }
 487                         break;
 488
 489                 case ACPI_IMPLICIT_CONVERT_HEX:
 490                         /*
 491                          * From the ACPI spec:
 492                          *"The entire contents of the buffer are converted to a string of
 493                          * two-character hexadecimal numbers, each separated by a space."
 494                          */
 495                         separator = ' ';
 496                         string_length = (obj_desc->buffer.length * 3);
 497                         break;
 498
 499                 case ACPI_EXPLICIT_CONVERT_HEX: /* Used by to_hex_string */
 500                         /*
 501                          * From ACPI: "If Data is a buffer, it is converted to a string of
 502                          * hexadecimal values separated by commas."
 503                          */
 504                         string_length = (obj_desc->buffer.length * 3);
 505                         break;
 506
 507                 default:
 508                         return_ACPI_STATUS(AE_BAD_PARAMETER);
 509                 }
 510
 511                 /*
 512                  * Create a new string object and string buffer
 513                  * (-1 because of extra separator included in string_length from above)
 514                  * Allow creation of zero-length strings from zero-length buffers.
 515                  */
 516                 if (string_length) {
 517                         string_length--;
 518                 }
 519
 520                 return_desc =
 521                     acpi_ut_create_string_object((acpi_size) string_length);
 522                 if (!return_desc) {
 523                         return_ACPI_STATUS(AE_NO_MEMORY);
 524                 }
 525
 526                 new_buf = return_desc->buffer.pointer;
 527
 528                 /*
 529                  * Convert buffer bytes to hex or decimal values
 530                  * (separated by commas or spaces)
 531                  */
 532                 for (i = 0; i < obj_desc->buffer.length; i++) {
 533                         new_buf += acpi_ex_convert_to_ascii((u64) obj_desc->
 534                                                             buffer.pointer[i],
 535                                                             base, new_buf, 1);
 536                         *new_buf++ = separator; /* each separated by a comma or space */
 537                 }
 538
 539                 /*
 540                  * Null terminate the string
 541                  * (overwrites final comma/space from above)
 542                  */
 543                 if (obj_desc->buffer.length) {
 544                         new_buf--;
 545                 }
 546                 *new_buf = 0;
 547                 break;
 548
 549         default:
 550
 551                 return_ACPI_STATUS(AE_TYPE);
 552         }
 553
 554         *result_desc = return_desc;
 555         return_ACPI_STATUS(AE_OK);
 556 }
 557
 558 /*******************************************************************************
 559  *
 560  * FUNCTION:    acpi_ex_convert_to_target_type
 561  *
 562  * PARAMETERS:  destination_type    - Current type of the destination
 563  *              source_desc         - Source object to be converted.
 564  *              result_desc         - Where the converted object is returned
 565  *              walk_state          - Current method state
 566  *
 567  * RETURN:      Status
 568  *
 569  * DESCRIPTION: Implements "implicit conversion" rules for storing an object.
 570  *
 571  ******************************************************************************/
 572
 573 acpi_status
 574 acpi_ex_convert_to_target_type(acpi_object_type destination_type,
 575                                union acpi_operand_object *source_desc,
 576                                union acpi_operand_object **result_desc,
 577                                struct acpi_walk_state *walk_state)
 578 {
 579         acpi_status status = AE_OK;
 580
 581         ACPI_FUNCTION_TRACE(ex_convert_to_target_type);
 582
 583         /* Default behavior */
 584
 585         *result_desc = source_desc;
 586
 587         /*
 588          * If required by the target,
 589          * perform implicit conversion on the source before we store it.
 590          */
 591         switch (GET_CURRENT_ARG_TYPE(walk_state->op_info->runtime_args)) {
 592         case ARGI_SIMPLE_TARGET:
 593         case ARGI_FIXED_TARGET:
 594         case ARGI_INTEGER_REF:  /* Handles Increment, Decrement cases */
 595
 596                 switch (destination_type) {
 597                 case ACPI_TYPE_LOCAL_REGION_FIELD:
 598                         /*
 599                          * Named field can always handle conversions
 600                          */
 601                         break;
 602
 603                 default:
 604
 605                         /* No conversion allowed for these types */
 606
 607                         if (destination_type != source_desc->common.type) {
 608                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 609                                                   "Explicit operator, will store (%s) over existing type (%s)\n",
 610                                                   acpi_ut_get_object_type_name
 611                                                   (source_desc),
 612                                                   acpi_ut_get_type_name
 613                                                   (destination_type)));
 614                                 status = AE_TYPE;
 615                         }
 616                 }
 617                 break;
 618
 619         case ARGI_TARGETREF:
 620         case ARGI_STORE_TARGET:
 621
 622                 switch (destination_type) {
 623                 case ACPI_TYPE_INTEGER:
 624                 case ACPI_TYPE_BUFFER_FIELD:
 625                 case ACPI_TYPE_LOCAL_BANK_FIELD:
 626                 case ACPI_TYPE_LOCAL_INDEX_FIELD:
 627                         /*
 628                          * These types require an Integer operand. We can convert
 629                          * a Buffer or a String to an Integer if necessary.
 630                          */
 631                         status =
 632                             acpi_ex_convert_to_integer(source_desc, result_desc,
 633                                                        16);
 634                         break;
 635
 636                 case ACPI_TYPE_STRING:
 637                         /*
 638                          * The operand must be a String. We can convert an
 639                          * Integer or Buffer if necessary
 640                          */
 641                         status =
 642                             acpi_ex_convert_to_string(source_desc, result_desc,
 643                                                       ACPI_IMPLICIT_CONVERT_HEX);
 644                         break;
 645
 646                 case ACPI_TYPE_BUFFER:
 647                         /*
 648                          * The operand must be a Buffer. We can convert an
 649                          * Integer or String if necessary
 650                          */
 651                         status =
 652                             acpi_ex_convert_to_buffer(source_desc, result_desc);
 653                         break;
 654
 655                 default:
 656
 657                         ACPI_ERROR((AE_INFO,
 658                                     "Bad destination type during conversion: 0x%X",
 659                                     destination_type));
 660                         status = AE_AML_INTERNAL;
 661                         break;
 662                 }
 663                 break;
 664
 665         case ARGI_REFERENCE:
 666                 /*
 667                  * create_xxxx_field cases - we are storing the field object into the name
 668                  */
 669                 break;
 670
 671         default:
 672
 673                 ACPI_ERROR((AE_INFO,
 674                             "Unknown Target type ID 0x%X AmlOpcode 0x%X DestType %s",
 675                             GET_CURRENT_ARG_TYPE(walk_state->op_info->
 676                                                  runtime_args),
 677                             walk_state->opcode,
 678                             acpi_ut_get_type_name(destination_type)));
 679                 status = AE_AML_INTERNAL;
 680         }
 681
 682         /*
 683          * Source-to-Target conversion semantics:
 684          *
 685          * If conversion to the target type cannot be performed, then simply
 686          * overwrite the target with the new object and type.
 687          */
 688         if (status == AE_TYPE) {
 689                 status = AE_OK;
 690         }
 691
 692         return_ACPI_STATUS(status);
 693 }