drivers/acpi/acpica/utxface.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utxface - External interfaces, miscellaneous utility functions
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <linux/export.h>
  45 #include <acpi/acpi.h>
  46 #include "accommon.h"
  47 #include "acdebug.h"
  48
  49 #define _COMPONENT          ACPI_UTILITIES
  50 ACPI_MODULE_NAME("utxface")
  51
  52 /*******************************************************************************
  53  *
  54  * FUNCTION:    acpi_terminate
  55  *
  56  * PARAMETERS:  None
  57  *
  58  * RETURN:      Status
  59  *
  60  * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
  61  *
  62  ******************************************************************************/
  63 acpi_status acpi_terminate(void)
  64 {
  65         acpi_status status;
  66
  67         ACPI_FUNCTION_TRACE(acpi_terminate);
  68
  69         /* Just exit if subsystem is already shutdown */
  70
  71         if (acpi_gbl_shutdown) {
  72                 ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
  73                 return_ACPI_STATUS(AE_OK);
  74         }
  75
  76         /* Subsystem appears active, go ahead and shut it down */
  77
  78         acpi_gbl_shutdown = TRUE;
  79         acpi_gbl_startup_flags = 0;
  80         ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
  81
  82         /* Terminate the AML Debugger if present */
  83
  84         ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
  85
  86         /* Shutdown and free all resources */
  87
  88         acpi_ut_subsystem_shutdown();
  89
  90         /* Free the mutex objects */
  91
  92         acpi_ut_mutex_terminate();
  93
  94 #ifdef ACPI_DEBUGGER
  95
  96         /* Shut down the debugger */
  97
  98         acpi_db_terminate();
  99 #endif
 100
 101         /* Now we can shutdown the OS-dependent layer */
 102
 103         status = acpi_os_terminate();
 104         return_ACPI_STATUS(status);
 105 }
 106
 107 ACPI_EXPORT_SYMBOL(acpi_terminate)
 108
 109 #ifndef ACPI_ASL_COMPILER
 110 #ifdef ACPI_FUTURE_USAGE
 111 /*******************************************************************************
 112  *
 113  * FUNCTION:    acpi_subsystem_status
 114  *
 115  * PARAMETERS:  None
 116  *
 117  * RETURN:      Status of the ACPI subsystem
 118  *
 119  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
 120  *              before making any other calls, to ensure the subsystem
 121  *              initialized successfully.
 122  *
 123  ******************************************************************************/
 124 acpi_status acpi_subsystem_status(void)
 125 {
 126
 127         if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
 128                 return (AE_OK);
 129         } else {
 130                 return (AE_ERROR);
 131         }
 132 }
 133
 134 ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
 135
 136 /*******************************************************************************
 137  *
 138  * FUNCTION:    acpi_get_system_info
 139  *
 140  * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
 141  *                                device
 142  *
 143  * RETURN:      status          - the status of the call
 144  *
 145  * DESCRIPTION: This function is called to get information about the current
 146  *              state of the ACPI subsystem. It will return system information
 147  *              in the out_buffer.
 148  *
 149  *              If the function fails an appropriate status will be returned
 150  *              and the value of out_buffer is undefined.
 151  *
 152  ******************************************************************************/
 153 acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
 154 {
 155         struct acpi_system_info *info_ptr;
 156         acpi_status status;
 157
 158         ACPI_FUNCTION_TRACE(acpi_get_system_info);
 159
 160         /* Parameter validation */
 161
 162         status = acpi_ut_validate_buffer(out_buffer);
 163         if (ACPI_FAILURE(status)) {
 164                 return_ACPI_STATUS(status);
 165         }
 166
 167         /* Validate/Allocate/Clear caller buffer */
 168
 169         status =
 170             acpi_ut_initialize_buffer(out_buffer,
 171                                       sizeof(struct acpi_system_info));
 172         if (ACPI_FAILURE(status)) {
 173                 return_ACPI_STATUS(status);
 174         }
 175
 176         /*
 177          * Populate the return buffer
 178          */
 179         info_ptr = (struct acpi_system_info *)out_buffer->pointer;
 180
 181         info_ptr->acpi_ca_version = ACPI_CA_VERSION;
 182
 183         /* System flags (ACPI capabilities) */
 184
 185         info_ptr->flags = ACPI_SYS_MODE_ACPI;
 186
 187         /* Timer resolution - 24 or 32 bits  */
 188
 189         if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
 190                 info_ptr->timer_resolution = 24;
 191         } else {
 192                 info_ptr->timer_resolution = 32;
 193         }
 194
 195         /* Clear the reserved fields */
 196
 197         info_ptr->reserved1 = 0;
 198         info_ptr->reserved2 = 0;
 199
 200         /* Current debug levels */
 201
 202         info_ptr->debug_layer = acpi_dbg_layer;
 203         info_ptr->debug_level = acpi_dbg_level;
 204
 205         return_ACPI_STATUS(AE_OK);
 206 }
 207
 208 ACPI_EXPORT_SYMBOL(acpi_get_system_info)
 209
 210 /*****************************************************************************
 211  *
 212  * FUNCTION:    acpi_install_initialization_handler
 213  *
 214  * PARAMETERS:  handler             - Callback procedure
 215  *              function            - Not (currently) used, see below
 216  *
 217  * RETURN:      Status
 218  *
 219  * DESCRIPTION: Install an initialization handler
 220  *
 221  * TBD: When a second function is added, must save the Function also.
 222  *
 223  ****************************************************************************/
 224 acpi_status
 225 acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
 226 {
 227
 228         if (!handler) {
 229                 return (AE_BAD_PARAMETER);
 230         }
 231
 232         if (acpi_gbl_init_handler) {
 233                 return (AE_ALREADY_EXISTS);
 234         }
 235
 236         acpi_gbl_init_handler = handler;
 237         return (AE_OK);
 238 }
 239
 240 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
 241 #endif                          /*  ACPI_FUTURE_USAGE  */
 242
 243 /*****************************************************************************
 244  *
 245  * FUNCTION:    acpi_purge_cached_objects
 246  *
 247  * PARAMETERS:  None
 248  *
 249  * RETURN:      Status
 250  *
 251  * DESCRIPTION: Empty all caches (delete the cached objects)
 252  *
 253  ****************************************************************************/
 254 acpi_status acpi_purge_cached_objects(void)
 255 {
 256         ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
 257
 258         (void)acpi_os_purge_cache(acpi_gbl_state_cache);
 259         (void)acpi_os_purge_cache(acpi_gbl_operand_cache);
 260         (void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
 261         (void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
 262
 263         return_ACPI_STATUS(AE_OK);
 264 }
 265
 266 ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
 267
 268 /*****************************************************************************
 269  *
 270  * FUNCTION:    acpi_install_interface
 271  *
 272  * PARAMETERS:  interface_name      - The interface to install
 273  *
 274  * RETURN:      Status
 275  *
 276  * DESCRIPTION: Install an _OSI interface to the global list
 277  *
 278  ****************************************************************************/
 279 acpi_status acpi_install_interface(acpi_string interface_name)
 280 {
 281         acpi_status status;
 282         struct acpi_interface_info *interface_info;
 283
 284         /* Parameter validation */
 285
 286         if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
 287                 return (AE_BAD_PARAMETER);
 288         }
 289
 290         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 291         if (ACPI_FAILURE(status)) {
 292                 return (status);
 293         }
 294
 295         /* Check if the interface name is already in the global list */
 296
 297         interface_info = acpi_ut_get_interface(interface_name);
 298         if (interface_info) {
 299                 /*
 300                  * The interface already exists in the list. This is OK if the
 301                  * interface has been marked invalid -- just clear the bit.
 302                  */
 303                 if (interface_info->flags & ACPI_OSI_INVALID) {
 304                         interface_info->flags &= ~ACPI_OSI_INVALID;
 305                         status = AE_OK;
 306                 } else {
 307                         status = AE_ALREADY_EXISTS;
 308                 }
 309         } else {
 310                 /* New interface name, install into the global list */
 311
 312                 status = acpi_ut_install_interface(interface_name);
 313         }
 314
 315         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 316         return (status);
 317 }
 318
 319 ACPI_EXPORT_SYMBOL(acpi_install_interface)
 320
 321 /*****************************************************************************
 322  *
 323  * FUNCTION:    acpi_remove_interface
 324  *
 325  * PARAMETERS:  interface_name      - The interface to remove
 326  *
 327  * RETURN:      Status
 328  *
 329  * DESCRIPTION: Remove an _OSI interface from the global list
 330  *
 331  ****************************************************************************/
 332 acpi_status acpi_remove_interface(acpi_string interface_name)
 333 {
 334         acpi_status status;
 335
 336         /* Parameter validation */
 337
 338         if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
 339                 return (AE_BAD_PARAMETER);
 340         }
 341
 342         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 343         if (ACPI_FAILURE(status)) {
 344                 return (status);
 345         }
 346
 347         status = acpi_ut_remove_interface(interface_name);
 348
 349         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 350         return (status);
 351 }
 352
 353 ACPI_EXPORT_SYMBOL(acpi_remove_interface)
 354
 355 /*****************************************************************************
 356  *
 357  * FUNCTION:    acpi_install_interface_handler
 358  *
 359  * PARAMETERS:  handler             - The _OSI interface handler to install
 360  *                                    NULL means "remove existing handler"
 361  *
 362  * RETURN:      Status
 363  *
 364  * DESCRIPTION: Install a handler for the predefined _OSI ACPI method.
 365  *              invoked during execution of the internal implementation of
 366  *              _OSI. A NULL handler simply removes any existing handler.
 367  *
 368  ****************************************************************************/
 369 acpi_status acpi_install_interface_handler(acpi_interface_handler handler)
 370 {
 371         acpi_status status;
 372
 373         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 374         if (ACPI_FAILURE(status)) {
 375                 return (status);
 376         }
 377
 378         if (handler && acpi_gbl_interface_handler) {
 379                 status = AE_ALREADY_EXISTS;
 380         } else {
 381                 acpi_gbl_interface_handler = handler;
 382         }
 383
 384         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 385         return (status);
 386 }
 387
 388 ACPI_EXPORT_SYMBOL(acpi_install_interface_handler)
 389
 390 /*****************************************************************************
 391  *
 392  * FUNCTION:    acpi_update_interfaces
 393  *
 394  * PARAMETERS:  action              - Actions to be performed during the
 395  *                                    update
 396  *
 397  * RETURN:      Status
 398  *
 399  * DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor
 400  *              string or/and feature group strings.
 401  *
 402  ****************************************************************************/
 403 acpi_status acpi_update_interfaces(u8 action)
 404 {
 405         acpi_status status;
 406
 407         status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
 408         if (ACPI_FAILURE(status)) {
 409                 return (status);
 410         }
 411
 412         status = acpi_ut_update_interfaces(action);
 413
 414         acpi_os_release_mutex(acpi_gbl_osi_mutex);
 415         return (status);
 416 }
 417
 418 /*****************************************************************************
 419  *
 420  * FUNCTION:    acpi_check_address_range
 421  *
 422  * PARAMETERS:  space_id            - Address space ID
 423  *              address             - Start address
 424  *              length              - Length
 425  *              warn                - TRUE if warning on overlap desired
 426  *
 427  * RETURN:      Count of the number of conflicts detected.
 428  *
 429  * DESCRIPTION: Check if the input address range overlaps any of the
 430  *              ASL operation region address ranges.
 431  *
 432  ****************************************************************************/
 433
 434 u32
 435 acpi_check_address_range(acpi_adr_space_type space_id,
 436                          acpi_physical_address address,
 437                          acpi_size length, u8 warn)
 438 {
 439         u32 overlaps;
 440         acpi_status status;
 441
 442         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 443         if (ACPI_FAILURE(status)) {
 444                 return (0);
 445         }
 446
 447         overlaps = acpi_ut_check_address_range(space_id, address,
 448                                                (u32)length, warn);
 449
 450         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 451         return (overlaps);
 452 }
 453
 454 ACPI_EXPORT_SYMBOL(acpi_check_address_range)
 455 #endif                          /* !ACPI_ASL_COMPILER */
 456 /*******************************************************************************
 457  *
 458  * FUNCTION:    acpi_decode_pld_buffer
 459  *
 460  * PARAMETERS:  in_buffer           - Buffer returned by _PLD method
 461  *              length              - Length of the in_buffer
 462  *              return_buffer       - Where the decode buffer is returned
 463  *
 464  * RETURN:      Status and the decoded _PLD buffer. User must deallocate
 465  *              the buffer via ACPI_FREE.
 466  *
 467  * DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into
 468  *              a local struct that is much more useful to an ACPI driver.
 469  *
 470  ******************************************************************************/
 471 acpi_status
 472 acpi_decode_pld_buffer(u8 *in_buffer,
 473                        acpi_size length, struct acpi_pld_info ** return_buffer)
 474 {
 475         struct acpi_pld_info *pld_info;
 476         u32 *buffer = ACPI_CAST_PTR(u32, in_buffer);
 477         u32 dword;
 478
 479         /* Parameter validation */
 480
 481         if (!in_buffer || !return_buffer || (length < 16)) {
 482                 return (AE_BAD_PARAMETER);
 483         }
 484
 485         pld_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pld_info));
 486         if (!pld_info) {
 487                 return (AE_NO_MEMORY);
 488         }
 489
 490         /* First 32-bit DWord */
 491
 492         ACPI_MOVE_32_TO_32(&dword, &buffer[0]);
 493         pld_info->revision = ACPI_PLD_GET_REVISION(&dword);
 494         pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword);
 495         pld_info->color = ACPI_PLD_GET_COLOR(&dword);
 496
 497         /* Second 32-bit DWord */
 498
 499         ACPI_MOVE_32_TO_32(&dword, &buffer[1]);
 500         pld_info->width = ACPI_PLD_GET_WIDTH(&dword);
 501         pld_info->height = ACPI_PLD_GET_HEIGHT(&dword);
 502
 503         /* Third 32-bit DWord */
 504
 505         ACPI_MOVE_32_TO_32(&dword, &buffer[2]);
 506         pld_info->user_visible = ACPI_PLD_GET_USER_VISIBLE(&dword);
 507         pld_info->dock = ACPI_PLD_GET_DOCK(&dword);
 508         pld_info->lid = ACPI_PLD_GET_LID(&dword);
 509         pld_info->panel = ACPI_PLD_GET_PANEL(&dword);
 510         pld_info->vertical_position = ACPI_PLD_GET_VERTICAL(&dword);
 511         pld_info->horizontal_position = ACPI_PLD_GET_HORIZONTAL(&dword);
 512         pld_info->shape = ACPI_PLD_GET_SHAPE(&dword);
 513         pld_info->group_orientation = ACPI_PLD_GET_ORIENTATION(&dword);
 514         pld_info->group_token = ACPI_PLD_GET_TOKEN(&dword);
 515         pld_info->group_position = ACPI_PLD_GET_POSITION(&dword);
 516         pld_info->bay = ACPI_PLD_GET_BAY(&dword);
 517
 518         /* Fourth 32-bit DWord */
 519
 520         ACPI_MOVE_32_TO_32(&dword, &buffer[3]);
 521         pld_info->ejectable = ACPI_PLD_GET_EJECTABLE(&dword);
 522         pld_info->ospm_eject_required = ACPI_PLD_GET_OSPM_EJECT(&dword);
 523         pld_info->cabinet_number = ACPI_PLD_GET_CABINET(&dword);
 524         pld_info->card_cage_number = ACPI_PLD_GET_CARD_CAGE(&dword);
 525         pld_info->reference = ACPI_PLD_GET_REFERENCE(&dword);
 526         pld_info->rotation = ACPI_PLD_GET_ROTATION(&dword);
 527         pld_info->order = ACPI_PLD_GET_ORDER(&dword);
 528
 529         if (length >= ACPI_PLD_BUFFER_SIZE) {
 530
 531                 /* Fifth 32-bit DWord (Revision 2 of _PLD) */
 532
 533                 ACPI_MOVE_32_TO_32(&dword, &buffer[4]);
 534                 pld_info->vertical_offset = ACPI_PLD_GET_VERT_OFFSET(&dword);
 535                 pld_info->horizontal_offset = ACPI_PLD_GET_HORIZ_OFFSET(&dword);
 536         }
 537
 538         *return_buffer = pld_info;
 539         return (AE_OK);
 540 }
 541
 542 ACPI_EXPORT_SYMBOL(acpi_decode_pld_buffer)