2 * Copyright (c) 2006-2009 Red Hat Inc.
3 * Copyright (c) 2006-2008 Intel Corporation
4 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
6 * DRM framebuffer helper functions
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
27 * Dave Airlie <airlied@linux.ie>
28 * Jesse Barnes <jesse.barnes@intel.com>
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/sysrq.h>
34 #include <linux/slab.h>
36 #include <linux/module.h>
38 #include <drm/drm_crtc.h>
39 #include <drm/drm_fb_helper.h>
40 #include <drm/drm_crtc_helper.h>
42 static LIST_HEAD(kernel_fb_helper_list);
47 * The fb helper functions are useful to provide an fbdev on top of a drm kernel
48 * mode setting driver. They can be used mostly independently from the crtc
49 * helper functions used by many drivers to implement the kernel mode setting
52 * Initialization is done as a four-step process with drm_fb_helper_prepare(),
53 * drm_fb_helper_init(), drm_fb_helper_single_add_all_connectors() and
54 * drm_fb_helper_initial_config(). Drivers with fancier requirements than the
55 * default behaviour can override the third step with their own code.
56 * Teardown is done with drm_fb_helper_fini().
58 * At runtime drivers should restore the fbdev console by calling
59 * drm_fb_helper_restore_fbdev_mode() from their ->lastclose callback. They
60 * should also notify the fb helper code from updates to the output
61 * configuration by calling drm_fb_helper_hotplug_event(). For easier
62 * integration with the output polling code in drm_crtc_helper.c the modeset
63 * code provides a ->output_poll_changed callback.
65 * All other functions exported by the fb helper library can be used to
66 * implement the fbdev driver interface by the driver.
68 * It is possible, though perhaps somewhat tricky, to implement race-free
69 * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
70 * helper must be called first to initialize the minimum required to make
71 * hotplug detection work. Drivers also need to make sure to properly set up
72 * the dev->mode_config.funcs member. After calling drm_kms_helper_poll_init()
73 * it is safe to enable interrupts and start processing hotplug events. At the
74 * same time, drivers should initialize all modeset objects such as CRTCs,
75 * encoders and connectors. To finish up the fbdev helper initialization, the
76 * drm_fb_helper_init() function is called. To probe for all attached displays
77 * and set up an initial configuration using the detected hardware, drivers
78 * should call drm_fb_helper_single_add_all_connectors() followed by
79 * drm_fb_helper_initial_config().
83 * drm_fb_helper_single_add_all_connectors() - add all connectors to fbdev
85 * @fb_helper: fbdev initialized with drm_fb_helper_init
87 * This functions adds all the available connectors for use with the given
88 * fb_helper. This is a separate step to allow drivers to freely assign
89 * connectors to the fbdev, e.g. if some are reserved for special purposes or
90 * not adequate to be used for the fbcon.
92 * Since this is part of the initial setup before the fbdev is published, no
93 * locking is required.
95 int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
97 struct drm_device *dev = fb_helper->dev;
98 struct drm_connector *connector;
101 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
102 struct drm_fb_helper_connector *fb_helper_connector;
104 fb_helper_connector = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
105 if (!fb_helper_connector)
108 fb_helper_connector->connector = connector;
109 fb_helper->connector_info[fb_helper->connector_count++] = fb_helper_connector;
113 for (i = 0; i < fb_helper->connector_count; i++) {
114 kfree(fb_helper->connector_info[i]);
115 fb_helper->connector_info[i] = NULL;
117 fb_helper->connector_count = 0;
120 EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
122 int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper, struct drm_connector *connector)
124 struct drm_fb_helper_connector **temp;
125 struct drm_fb_helper_connector *fb_helper_connector;
127 WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
128 if (fb_helper->connector_count + 1 > fb_helper->connector_info_alloc_count) {
129 temp = krealloc(fb_helper->connector_info, sizeof(struct drm_fb_helper_connector *) * (fb_helper->connector_count + 1), GFP_KERNEL);
133 fb_helper->connector_info_alloc_count = fb_helper->connector_count + 1;
134 fb_helper->connector_info = temp;
138 fb_helper_connector = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
139 if (!fb_helper_connector)
142 fb_helper_connector->connector = connector;
143 fb_helper->connector_info[fb_helper->connector_count++] = fb_helper_connector;
146 EXPORT_SYMBOL(drm_fb_helper_add_one_connector);
148 int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
149 struct drm_connector *connector)
151 struct drm_fb_helper_connector *fb_helper_connector;
154 WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
156 for (i = 0; i < fb_helper->connector_count; i++) {
157 if (fb_helper->connector_info[i]->connector == connector)
161 if (i == fb_helper->connector_count)
163 fb_helper_connector = fb_helper->connector_info[i];
165 for (j = i + 1; j < fb_helper->connector_count; j++) {
166 fb_helper->connector_info[j - 1] = fb_helper->connector_info[j];
168 fb_helper->connector_count--;
169 kfree(fb_helper_connector);
172 EXPORT_SYMBOL(drm_fb_helper_remove_one_connector);
174 static void drm_fb_helper_save_lut_atomic(struct drm_crtc *crtc, struct drm_fb_helper *helper)
176 uint16_t *r_base, *g_base, *b_base;
179 if (helper->funcs->gamma_get == NULL)
182 r_base = crtc->gamma_store;
183 g_base = r_base + crtc->gamma_size;
184 b_base = g_base + crtc->gamma_size;
186 for (i = 0; i < crtc->gamma_size; i++)
187 helper->funcs->gamma_get(crtc, &r_base[i], &g_base[i], &b_base[i], i);
190 static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
192 uint16_t *r_base, *g_base, *b_base;
194 if (crtc->funcs->gamma_set == NULL)
197 r_base = crtc->gamma_store;
198 g_base = r_base + crtc->gamma_size;
199 b_base = g_base + crtc->gamma_size;
201 crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, 0, crtc->gamma_size);
205 * drm_fb_helper_debug_enter - implementation for ->fb_debug_enter
206 * @info: fbdev registered by the helper
208 int drm_fb_helper_debug_enter(struct fb_info *info)
210 struct drm_fb_helper *helper = info->par;
211 struct drm_crtc_helper_funcs *funcs;
214 list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
215 for (i = 0; i < helper->crtc_count; i++) {
216 struct drm_mode_set *mode_set =
217 &helper->crtc_info[i].mode_set;
219 if (!mode_set->crtc->enabled)
222 funcs = mode_set->crtc->helper_private;
223 drm_fb_helper_save_lut_atomic(mode_set->crtc, helper);
224 funcs->mode_set_base_atomic(mode_set->crtc,
228 ENTER_ATOMIC_MODE_SET);
234 EXPORT_SYMBOL(drm_fb_helper_debug_enter);
236 /* Find the real fb for a given fb helper CRTC */
237 static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
239 struct drm_device *dev = crtc->dev;
242 list_for_each_entry(c, &dev->mode_config.crtc_list, head) {
243 if (crtc->base.id == c->base.id)
244 return c->primary->fb;
251 * drm_fb_helper_debug_leave - implementation for ->fb_debug_leave
252 * @info: fbdev registered by the helper
254 int drm_fb_helper_debug_leave(struct fb_info *info)
256 struct drm_fb_helper *helper = info->par;
257 struct drm_crtc *crtc;
258 struct drm_crtc_helper_funcs *funcs;
259 struct drm_framebuffer *fb;
262 for (i = 0; i < helper->crtc_count; i++) {
263 struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
264 crtc = mode_set->crtc;
265 funcs = crtc->helper_private;
266 fb = drm_mode_config_fb(crtc);
272 DRM_ERROR("no fb to restore??\n");
276 drm_fb_helper_restore_lut_atomic(mode_set->crtc);
277 funcs->mode_set_base_atomic(mode_set->crtc, fb, crtc->x,
278 crtc->y, LEAVE_ATOMIC_MODE_SET);
283 EXPORT_SYMBOL(drm_fb_helper_debug_leave);
285 static bool restore_fbdev_mode(struct drm_fb_helper *fb_helper)
287 struct drm_device *dev = fb_helper->dev;
288 struct drm_plane *plane;
292 drm_warn_on_modeset_not_all_locked(dev);
294 list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
295 if (plane->type != DRM_PLANE_TYPE_PRIMARY)
296 drm_plane_force_disable(plane);
298 if (dev->mode_config.rotation_property) {
299 drm_mode_plane_set_obj_prop(plane,
300 dev->mode_config.rotation_property,
305 for (i = 0; i < fb_helper->crtc_count; i++) {
306 struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
307 struct drm_crtc *crtc = mode_set->crtc;
310 if (crtc->funcs->cursor_set) {
311 ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
316 ret = drm_mode_set_config_internal(mode_set);
323 * drm_fb_helper_restore_fbdev_mode - restore fbdev configuration
324 * @fb_helper: fbcon to restore
326 * This should be called from driver's drm ->lastclose callback
327 * when implementing an fbcon on top of kms using this helper. This ensures that
328 * the user isn't greeted with a black screen when e.g. X dies.
330 * Use this variant if you need to bypass locking (panic), or already
331 * hold all modeset locks. Otherwise use drm_fb_helper_restore_fbdev_mode_unlocked()
333 static bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper)
335 return restore_fbdev_mode(fb_helper);
339 * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
340 * @fb_helper: fbcon to restore
342 * This should be called from driver's drm ->lastclose callback
343 * when implementing an fbcon on top of kms using this helper. This ensures that
344 * the user isn't greeted with a black screen when e.g. X dies.
346 bool drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
348 struct drm_device *dev = fb_helper->dev;
350 bool do_delayed = false;
352 drm_modeset_lock_all(dev);
353 ret = restore_fbdev_mode(fb_helper);
355 do_delayed = fb_helper->delayed_hotplug;
357 fb_helper->delayed_hotplug = false;
358 drm_modeset_unlock_all(dev);
361 drm_fb_helper_hotplug_event(fb_helper);
364 EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode_unlocked);
367 * restore fbcon display for all kms driver's using this helper, used for sysrq
368 * and panic handling.
370 static bool drm_fb_helper_force_kernel_mode(void)
372 bool ret, error = false;
373 struct drm_fb_helper *helper;
375 if (list_empty(&kernel_fb_helper_list))
378 list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
379 struct drm_device *dev = helper->dev;
381 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
385 * NOTE: Use trylock mode to avoid deadlocks and sleeping in
388 if (__drm_modeset_lock_all(dev, true) != 0) {
393 ret = drm_fb_helper_restore_fbdev_mode(helper);
397 drm_modeset_unlock_all(dev);
402 static int drm_fb_helper_panic(struct notifier_block *n, unsigned long ununsed,
406 * It's a waste of time and effort to switch back to text console
407 * if the kernel should reboot before panic messages can be seen.
409 if (panic_timeout < 0)
412 pr_err("panic occurred, switching back to text console\n");
413 return drm_fb_helper_force_kernel_mode();
416 static struct notifier_block paniced = {
417 .notifier_call = drm_fb_helper_panic,
420 static bool drm_fb_helper_is_bound(struct drm_fb_helper *fb_helper)
422 struct drm_device *dev = fb_helper->dev;
423 struct drm_crtc *crtc;
424 int bound = 0, crtcs_bound = 0;
426 /* Sometimes user space wants everything disabled, so don't steal the
427 * display if there's a master. */
428 if (dev->primary->master)
431 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
432 if (crtc->primary->fb)
434 if (crtc->primary->fb == fb_helper->fb)
438 if (bound < crtcs_bound)
444 #ifdef CONFIG_MAGIC_SYSRQ
445 static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
448 ret = drm_fb_helper_force_kernel_mode();
450 DRM_ERROR("Failed to restore crtc configuration\n");
452 static DECLARE_WORK(drm_fb_helper_restore_work, drm_fb_helper_restore_work_fn);
454 static void drm_fb_helper_sysrq(int dummy1)
456 schedule_work(&drm_fb_helper_restore_work);
459 static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
460 .handler = drm_fb_helper_sysrq,
461 .help_msg = "force-fb(V)",
462 .action_msg = "Restore framebuffer console",
465 static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
468 static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
470 struct drm_fb_helper *fb_helper = info->par;
471 struct drm_device *dev = fb_helper->dev;
472 struct drm_crtc *crtc;
473 struct drm_connector *connector;
477 * fbdev->blank can be called from irq context in case of a panic.
478 * Since we already have our own special panic handler which will
479 * restore the fbdev console mode completely, just bail out early.
481 if (oops_in_progress)
485 * For each CRTC in this fb, turn the connectors on/off.
487 drm_modeset_lock_all(dev);
488 if (!drm_fb_helper_is_bound(fb_helper)) {
489 drm_modeset_unlock_all(dev);
493 for (i = 0; i < fb_helper->crtc_count; i++) {
494 crtc = fb_helper->crtc_info[i].mode_set.crtc;
499 /* Walk the connectors & encoders on this fb turning them on/off */
500 for (j = 0; j < fb_helper->connector_count; j++) {
501 connector = fb_helper->connector_info[j]->connector;
502 connector->funcs->dpms(connector, dpms_mode);
503 drm_object_property_set_value(&connector->base,
504 dev->mode_config.dpms_property, dpms_mode);
507 drm_modeset_unlock_all(dev);
511 * drm_fb_helper_blank - implementation for ->fb_blank
512 * @blank: desired blanking state
513 * @info: fbdev registered by the helper
515 int drm_fb_helper_blank(int blank, struct fb_info *info)
518 /* Display: On; HSync: On, VSync: On */
519 case FB_BLANK_UNBLANK:
520 drm_fb_helper_dpms(info, DRM_MODE_DPMS_ON);
522 /* Display: Off; HSync: On, VSync: On */
523 case FB_BLANK_NORMAL:
524 drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
526 /* Display: Off; HSync: Off, VSync: On */
527 case FB_BLANK_HSYNC_SUSPEND:
528 drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
530 /* Display: Off; HSync: On, VSync: Off */
531 case FB_BLANK_VSYNC_SUSPEND:
532 drm_fb_helper_dpms(info, DRM_MODE_DPMS_SUSPEND);
534 /* Display: Off; HSync: Off, VSync: Off */
535 case FB_BLANK_POWERDOWN:
536 drm_fb_helper_dpms(info, DRM_MODE_DPMS_OFF);
541 EXPORT_SYMBOL(drm_fb_helper_blank);
543 static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper)
547 for (i = 0; i < helper->connector_count; i++)
548 kfree(helper->connector_info[i]);
549 kfree(helper->connector_info);
550 for (i = 0; i < helper->crtc_count; i++) {
551 kfree(helper->crtc_info[i].mode_set.connectors);
552 if (helper->crtc_info[i].mode_set.mode)
553 drm_mode_destroy(helper->dev, helper->crtc_info[i].mode_set.mode);
555 kfree(helper->crtc_info);
559 * drm_fb_helper_prepare - setup a drm_fb_helper structure
561 * @helper: driver-allocated fbdev helper structure to set up
562 * @funcs: pointer to structure of functions associate with this helper
564 * Sets up the bare minimum to make the framebuffer helper usable. This is
565 * useful to implement race-free initialization of the polling helpers.
567 void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
568 const struct drm_fb_helper_funcs *funcs)
570 INIT_LIST_HEAD(&helper->kernel_fb_list);
571 helper->funcs = funcs;
574 EXPORT_SYMBOL(drm_fb_helper_prepare);
577 * drm_fb_helper_init - initialize a drm_fb_helper structure
579 * @fb_helper: driver-allocated fbdev helper structure to initialize
580 * @crtc_count: maximum number of crtcs to support in this fbdev emulation
581 * @max_conn_count: max connector count
583 * This allocates the structures for the fbdev helper with the given limits.
584 * Note that this won't yet touch the hardware (through the driver interfaces)
585 * nor register the fbdev. This is only done in drm_fb_helper_initial_config()
586 * to allow driver writes more control over the exact init sequence.
588 * Drivers must call drm_fb_helper_prepare() before calling this function.
591 * Zero if everything went ok, nonzero otherwise.
593 int drm_fb_helper_init(struct drm_device *dev,
594 struct drm_fb_helper *fb_helper,
595 int crtc_count, int max_conn_count)
597 struct drm_crtc *crtc;
603 fb_helper->crtc_info = kcalloc(crtc_count, sizeof(struct drm_fb_helper_crtc), GFP_KERNEL);
604 if (!fb_helper->crtc_info)
607 fb_helper->crtc_count = crtc_count;
608 fb_helper->connector_info = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_fb_helper_connector *), GFP_KERNEL);
609 if (!fb_helper->connector_info) {
610 kfree(fb_helper->crtc_info);
613 fb_helper->connector_info_alloc_count = dev->mode_config.num_connector;
614 fb_helper->connector_count = 0;
616 for (i = 0; i < crtc_count; i++) {
617 fb_helper->crtc_info[i].mode_set.connectors =
618 kcalloc(max_conn_count,
619 sizeof(struct drm_connector *),
622 if (!fb_helper->crtc_info[i].mode_set.connectors)
624 fb_helper->crtc_info[i].mode_set.num_connectors = 0;
628 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
629 fb_helper->crtc_info[i].mode_set.crtc = crtc;
635 drm_fb_helper_crtc_free(fb_helper);
638 EXPORT_SYMBOL(drm_fb_helper_init);
640 void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
642 if (!list_empty(&fb_helper->kernel_fb_list)) {
643 list_del(&fb_helper->kernel_fb_list);
644 if (list_empty(&kernel_fb_helper_list)) {
645 pr_info("drm: unregistered panic notifier\n");
646 atomic_notifier_chain_unregister(&panic_notifier_list,
648 unregister_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
652 drm_fb_helper_crtc_free(fb_helper);
655 EXPORT_SYMBOL(drm_fb_helper_fini);
657 static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
658 u16 blue, u16 regno, struct fb_info *info)
660 struct drm_fb_helper *fb_helper = info->par;
661 struct drm_framebuffer *fb = fb_helper->fb;
664 if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
667 /* place color in psuedopalette */
670 palette = (u32 *)info->pseudo_palette;
671 red >>= (16 - info->var.red.length);
672 green >>= (16 - info->var.green.length);
673 blue >>= (16 - info->var.blue.length);
674 value = (red << info->var.red.offset) |
675 (green << info->var.green.offset) |
676 (blue << info->var.blue.offset);
677 if (info->var.transp.length > 0) {
678 u32 mask = (1 << info->var.transp.length) - 1;
679 mask <<= info->var.transp.offset;
682 palette[regno] = value;
687 * The driver really shouldn't advertise pseudo/directcolor
688 * visuals if it can't deal with the palette.
690 if (WARN_ON(!fb_helper->funcs->gamma_set ||
691 !fb_helper->funcs->gamma_get))
696 if (fb->bits_per_pixel == 16) {
699 if (fb->depth == 16 && regno > 63)
701 if (fb->depth == 15 && regno > 31)
704 if (fb->depth == 16) {
708 for (i = 0; i < 8; i++)
709 fb_helper->funcs->gamma_set(crtc, red,
710 green, blue, pindex + i);
713 fb_helper->funcs->gamma_get(crtc, &r,
717 for (i = 0; i < 4; i++)
718 fb_helper->funcs->gamma_set(crtc, r,
725 fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex);
730 * drm_fb_helper_setcmap - implementation for ->fb_setcmap
732 * @info: fbdev registered by the helper
734 int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
736 struct drm_fb_helper *fb_helper = info->par;
737 struct drm_device *dev = fb_helper->dev;
738 struct drm_crtc_helper_funcs *crtc_funcs;
739 u16 *red, *green, *blue, *transp;
740 struct drm_crtc *crtc;
744 if (__drm_modeset_lock_all(dev, !!oops_in_progress)) {
747 if (!drm_fb_helper_is_bound(fb_helper)) {
748 drm_modeset_unlock_all(dev);
752 for (i = 0; i < fb_helper->crtc_count; i++) {
753 crtc = fb_helper->crtc_info[i].mode_set.crtc;
754 crtc_funcs = crtc->helper_private;
759 transp = cmap->transp;
762 for (j = 0; j < cmap->len; j++) {
763 u16 hred, hgreen, hblue, htransp = 0xffff;
772 rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
776 if (crtc_funcs->load_lut)
777 crtc_funcs->load_lut(crtc);
780 drm_modeset_unlock_all(dev);
783 EXPORT_SYMBOL(drm_fb_helper_setcmap);
786 * drm_fb_helper_check_var - implementation for ->fb_check_var
787 * @var: screeninfo to check
788 * @info: fbdev registered by the helper
790 int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
791 struct fb_info *info)
793 struct drm_fb_helper *fb_helper = info->par;
794 struct drm_framebuffer *fb = fb_helper->fb;
797 if (var->pixclock != 0 || in_dbg_master())
800 /* Need to resize the fb object !!! */
801 if (var->bits_per_pixel > fb->bits_per_pixel ||
802 var->xres > fb->width || var->yres > fb->height ||
803 var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
804 DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb "
805 "request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
806 var->xres, var->yres, var->bits_per_pixel,
807 var->xres_virtual, var->yres_virtual,
808 fb->width, fb->height, fb->bits_per_pixel);
812 switch (var->bits_per_pixel) {
814 depth = (var->green.length == 6) ? 16 : 15;
817 depth = (var->transp.length > 0) ? 32 : 24;
820 depth = var->bits_per_pixel;
827 var->green.offset = 0;
828 var->blue.offset = 0;
830 var->green.length = 8;
831 var->blue.length = 8;
832 var->transp.length = 0;
833 var->transp.offset = 0;
836 var->red.offset = 10;
837 var->green.offset = 5;
838 var->blue.offset = 0;
840 var->green.length = 5;
841 var->blue.length = 5;
842 var->transp.length = 1;
843 var->transp.offset = 15;
846 var->red.offset = 11;
847 var->green.offset = 5;
848 var->blue.offset = 0;
850 var->green.length = 6;
851 var->blue.length = 5;
852 var->transp.length = 0;
853 var->transp.offset = 0;
856 var->red.offset = 16;
857 var->green.offset = 8;
858 var->blue.offset = 0;
860 var->green.length = 8;
861 var->blue.length = 8;
862 var->transp.length = 0;
863 var->transp.offset = 0;
866 var->red.offset = 16;
867 var->green.offset = 8;
868 var->blue.offset = 0;
870 var->green.length = 8;
871 var->blue.length = 8;
872 var->transp.length = 8;
873 var->transp.offset = 24;
880 EXPORT_SYMBOL(drm_fb_helper_check_var);
883 * drm_fb_helper_set_par - implementation for ->fb_set_par
884 * @info: fbdev registered by the helper
886 * This will let fbcon do the mode init and is called at initialization time by
887 * the fbdev core when registering the driver, and later on through the hotplug
890 int drm_fb_helper_set_par(struct fb_info *info)
892 struct drm_fb_helper *fb_helper = info->par;
893 struct fb_var_screeninfo *var = &info->var;
895 if (var->pixclock != 0) {
896 DRM_ERROR("PIXEL CLOCK SET\n");
900 drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
904 EXPORT_SYMBOL(drm_fb_helper_set_par);
907 * drm_fb_helper_pan_display - implementation for ->fb_pan_display
908 * @var: updated screen information
909 * @info: fbdev registered by the helper
911 int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
912 struct fb_info *info)
914 struct drm_fb_helper *fb_helper = info->par;
915 struct drm_device *dev = fb_helper->dev;
916 struct drm_mode_set *modeset;
920 if (__drm_modeset_lock_all(dev, !!oops_in_progress)) {
923 if (!drm_fb_helper_is_bound(fb_helper)) {
924 drm_modeset_unlock_all(dev);
928 for (i = 0; i < fb_helper->crtc_count; i++) {
929 modeset = &fb_helper->crtc_info[i].mode_set;
931 modeset->x = var->xoffset;
932 modeset->y = var->yoffset;
934 if (modeset->num_connectors) {
935 ret = drm_mode_set_config_internal(modeset);
937 info->var.xoffset = var->xoffset;
938 info->var.yoffset = var->yoffset;
942 drm_modeset_unlock_all(dev);
945 EXPORT_SYMBOL(drm_fb_helper_pan_display);
948 * Allocates the backing storage and sets up the fbdev info structure through
949 * the ->fb_probe callback and then registers the fbdev and sets up the panic
952 static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
958 struct fb_info *info;
959 struct drm_fb_helper_surface_size sizes;
962 memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size));
963 sizes.surface_depth = 24;
964 sizes.surface_bpp = 32;
965 sizes.fb_width = (unsigned)-1;
966 sizes.fb_height = (unsigned)-1;
968 /* if driver picks 8 or 16 by default use that
969 for both depth/bpp */
970 if (preferred_bpp != sizes.surface_bpp)
971 sizes.surface_depth = sizes.surface_bpp = preferred_bpp;
973 /* first up get a count of crtcs now in use and new min/maxes width/heights */
974 for (i = 0; i < fb_helper->connector_count; i++) {
975 struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
976 struct drm_cmdline_mode *cmdline_mode;
978 cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
980 if (cmdline_mode->bpp_specified) {
981 switch (cmdline_mode->bpp) {
983 sizes.surface_depth = sizes.surface_bpp = 8;
986 sizes.surface_depth = 15;
987 sizes.surface_bpp = 16;
990 sizes.surface_depth = sizes.surface_bpp = 16;
993 sizes.surface_depth = sizes.surface_bpp = 24;
996 sizes.surface_depth = 24;
997 sizes.surface_bpp = 32;
1005 for (i = 0; i < fb_helper->crtc_count; i++) {
1006 struct drm_display_mode *desired_mode;
1008 desired_mode = fb_helper->crtc_info[i].desired_mode;
1009 x = fb_helper->crtc_info[i].x;
1010 y = fb_helper->crtc_info[i].y;
1012 if (gamma_size == 0)
1013 gamma_size = fb_helper->crtc_info[i].mode_set.crtc->gamma_size;
1014 if (desired_mode->hdisplay + x < sizes.fb_width)
1015 sizes.fb_width = desired_mode->hdisplay + x;
1016 if (desired_mode->vdisplay + y < sizes.fb_height)
1017 sizes.fb_height = desired_mode->vdisplay + y;
1018 if (desired_mode->hdisplay + x > sizes.surface_width)
1019 sizes.surface_width = desired_mode->hdisplay + x;
1020 if (desired_mode->vdisplay + y > sizes.surface_height)
1021 sizes.surface_height = desired_mode->vdisplay + y;
1026 if (crtc_count == 0 || sizes.fb_width == -1 || sizes.fb_height == -1) {
1027 /* hmm everyone went away - assume VGA cable just fell out
1028 and will come back later. */
1029 DRM_INFO("Cannot find any crtc or sizes - going 1024x768\n");
1030 sizes.fb_width = sizes.surface_width = 1024;
1031 sizes.fb_height = sizes.surface_height = 768;
1034 /* push down into drivers */
1035 ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
1039 info = fb_helper->fbdev;
1042 * Set the fb pointer - usually drm_setup_crtcs does this for hotplug
1043 * events, but at init time drm_setup_crtcs needs to be called before
1044 * the fb is allocated (since we need to figure out the desired size of
1045 * the fb before we can allocate it ...). Hence we need to fix things up
1048 for (i = 0; i < fb_helper->crtc_count; i++)
1049 if (fb_helper->crtc_info[i].mode_set.num_connectors)
1050 fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
1053 info->var.pixclock = 0;
1054 if (register_framebuffer(info) < 0)
1057 dev_info(fb_helper->dev->dev, "fb%d: %s frame buffer device\n",
1058 info->node, info->fix.id);
1060 /* Switch back to kernel console on panic */
1061 /* multi card linked list maybe */
1062 if (list_empty(&kernel_fb_helper_list)) {
1063 dev_info(fb_helper->dev->dev, "registered panic notifier\n");
1064 atomic_notifier_chain_register(&panic_notifier_list,
1066 register_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
1069 list_add(&fb_helper->kernel_fb_list, &kernel_fb_helper_list);
1075 * drm_fb_helper_fill_fix - initializes fixed fbdev information
1076 * @info: fbdev registered by the helper
1077 * @pitch: desired pitch
1078 * @depth: desired depth
1080 * Helper to fill in the fixed fbdev information useful for a non-accelerated
1081 * fbdev emulations. Drivers which support acceleration methods which impose
1082 * additional constraints need to set up their own limits.
1084 * Drivers should call this (or their equivalent setup code) from their
1085 * ->fb_probe callback.
1087 void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
1090 info->fix.type = FB_TYPE_PACKED_PIXELS;
1091 info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
1092 FB_VISUAL_TRUECOLOR;
1093 info->fix.mmio_start = 0;
1094 info->fix.mmio_len = 0;
1095 info->fix.type_aux = 0;
1096 info->fix.xpanstep = 1; /* doing it in hw */
1097 info->fix.ypanstep = 1; /* doing it in hw */
1098 info->fix.ywrapstep = 0;
1099 info->fix.accel = FB_ACCEL_NONE;
1101 info->fix.line_length = pitch;
1104 EXPORT_SYMBOL(drm_fb_helper_fill_fix);
1107 * drm_fb_helper_fill_var - initalizes variable fbdev information
1108 * @info: fbdev instance to set up
1109 * @fb_helper: fb helper instance to use as template
1110 * @fb_width: desired fb width
1111 * @fb_height: desired fb height
1113 * Sets up the variable fbdev metainformation from the given fb helper instance
1114 * and the drm framebuffer allocated in fb_helper->fb.
1116 * Drivers should call this (or their equivalent setup code) from their
1117 * ->fb_probe callback after having allocated the fbdev backing
1118 * storage framebuffer.
1120 void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
1121 uint32_t fb_width, uint32_t fb_height)
1123 struct drm_framebuffer *fb = fb_helper->fb;
1124 info->pseudo_palette = fb_helper->pseudo_palette;
1125 info->var.xres_virtual = fb->width;
1126 info->var.yres_virtual = fb->height;
1127 info->var.bits_per_pixel = fb->bits_per_pixel;
1128 info->var.accel_flags = FB_ACCELF_TEXT;
1129 info->var.xoffset = 0;
1130 info->var.yoffset = 0;
1131 info->var.activate = FB_ACTIVATE_NOW;
1132 info->var.height = -1;
1133 info->var.width = -1;
1135 switch (fb->depth) {
1137 info->var.red.offset = 0;
1138 info->var.green.offset = 0;
1139 info->var.blue.offset = 0;
1140 info->var.red.length = 8; /* 8bit DAC */
1141 info->var.green.length = 8;
1142 info->var.blue.length = 8;
1143 info->var.transp.offset = 0;
1144 info->var.transp.length = 0;
1147 info->var.red.offset = 10;
1148 info->var.green.offset = 5;
1149 info->var.blue.offset = 0;
1150 info->var.red.length = 5;
1151 info->var.green.length = 5;
1152 info->var.blue.length = 5;
1153 info->var.transp.offset = 15;
1154 info->var.transp.length = 1;
1157 info->var.red.offset = 11;
1158 info->var.green.offset = 5;
1159 info->var.blue.offset = 0;
1160 info->var.red.length = 5;
1161 info->var.green.length = 6;
1162 info->var.blue.length = 5;
1163 info->var.transp.offset = 0;
1166 info->var.red.offset = 16;
1167 info->var.green.offset = 8;
1168 info->var.blue.offset = 0;
1169 info->var.red.length = 8;
1170 info->var.green.length = 8;
1171 info->var.blue.length = 8;
1172 info->var.transp.offset = 0;
1173 info->var.transp.length = 0;
1176 info->var.red.offset = 16;
1177 info->var.green.offset = 8;
1178 info->var.blue.offset = 0;
1179 info->var.red.length = 8;
1180 info->var.green.length = 8;
1181 info->var.blue.length = 8;
1182 info->var.transp.offset = 24;
1183 info->var.transp.length = 8;
1189 info->var.xres = fb_width;
1190 info->var.yres = fb_height;
1192 EXPORT_SYMBOL(drm_fb_helper_fill_var);
1194 static int drm_fb_helper_probe_connector_modes(struct drm_fb_helper *fb_helper,
1198 struct drm_connector *connector;
1202 for (i = 0; i < fb_helper->connector_count; i++) {
1203 connector = fb_helper->connector_info[i]->connector;
1204 count += connector->funcs->fill_modes(connector, maxX, maxY);
1210 struct drm_display_mode *drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector, int width, int height)
1212 struct drm_display_mode *mode;
1214 list_for_each_entry(mode, &fb_connector->connector->modes, head) {
1215 if (mode->hdisplay > width ||
1216 mode->vdisplay > height)
1218 if (mode->type & DRM_MODE_TYPE_PREFERRED)
1223 EXPORT_SYMBOL(drm_has_preferred_mode);
1225 static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
1227 return fb_connector->connector->cmdline_mode.specified;
1230 struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn,
1231 int width, int height)
1233 struct drm_cmdline_mode *cmdline_mode;
1234 struct drm_display_mode *mode = NULL;
1235 bool prefer_non_interlace;
1237 cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
1238 if (cmdline_mode->specified == false)
1241 /* attempt to find a matching mode in the list of modes
1242 * we have gotten so far, if not add a CVT mode that conforms
1244 if (cmdline_mode->rb || cmdline_mode->margins)
1247 prefer_non_interlace = !cmdline_mode->interlace;
1249 list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
1250 /* check width/height */
1251 if (mode->hdisplay != cmdline_mode->xres ||
1252 mode->vdisplay != cmdline_mode->yres)
1255 if (cmdline_mode->refresh_specified) {
1256 if (mode->vrefresh != cmdline_mode->refresh)
1260 if (cmdline_mode->interlace) {
1261 if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
1263 } else if (prefer_non_interlace) {
1264 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
1270 if (prefer_non_interlace) {
1271 prefer_non_interlace = false;
1276 mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
1278 list_add(&mode->head, &fb_helper_conn->connector->modes);
1281 EXPORT_SYMBOL(drm_pick_cmdline_mode);
1283 static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
1288 enable = connector->status == connector_status_connected;
1290 enable = connector->status != connector_status_disconnected;
1295 static void drm_enable_connectors(struct drm_fb_helper *fb_helper,
1298 bool any_enabled = false;
1299 struct drm_connector *connector;
1302 for (i = 0; i < fb_helper->connector_count; i++) {
1303 connector = fb_helper->connector_info[i]->connector;
1304 enabled[i] = drm_connector_enabled(connector, true);
1305 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
1306 enabled[i] ? "yes" : "no");
1307 any_enabled |= enabled[i];
1313 for (i = 0; i < fb_helper->connector_count; i++) {
1314 connector = fb_helper->connector_info[i]->connector;
1315 enabled[i] = drm_connector_enabled(connector, false);
1319 static bool drm_target_cloned(struct drm_fb_helper *fb_helper,
1320 struct drm_display_mode **modes,
1321 struct drm_fb_offset *offsets,
1322 bool *enabled, int width, int height)
1325 bool can_clone = false;
1326 struct drm_fb_helper_connector *fb_helper_conn;
1327 struct drm_display_mode *dmt_mode, *mode;
1329 /* only contemplate cloning in the single crtc case */
1330 if (fb_helper->crtc_count > 1)
1334 for (i = 0; i < fb_helper->connector_count; i++) {
1339 /* only contemplate cloning if more than one connector is enabled */
1343 /* check the command line or if nothing common pick 1024x768 */
1345 for (i = 0; i < fb_helper->connector_count; i++) {
1348 fb_helper_conn = fb_helper->connector_info[i];
1349 modes[i] = drm_pick_cmdline_mode(fb_helper_conn, width, height);
1354 for (j = 0; j < i; j++) {
1357 if (!drm_mode_equal(modes[j], modes[i]))
1363 DRM_DEBUG_KMS("can clone using command line\n");
1367 /* try and find a 1024x768 mode on each connector */
1369 dmt_mode = drm_mode_find_dmt(fb_helper->dev, 1024, 768, 60, false);
1371 for (i = 0; i < fb_helper->connector_count; i++) {
1376 fb_helper_conn = fb_helper->connector_info[i];
1377 list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
1378 if (drm_mode_equal(mode, dmt_mode))
1386 DRM_DEBUG_KMS("can clone using 1024x768\n");
1389 DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
1393 static int drm_get_tile_offsets(struct drm_fb_helper *fb_helper,
1394 struct drm_display_mode **modes,
1395 struct drm_fb_offset *offsets,
1397 int h_idx, int v_idx)
1399 struct drm_fb_helper_connector *fb_helper_conn;
1401 int hoffset = 0, voffset = 0;
1403 for (i = 0; i < fb_helper->connector_count; i++) {
1404 fb_helper_conn = fb_helper->connector_info[i];
1405 if (!fb_helper_conn->connector->has_tile)
1408 if (!modes[i] && (h_idx || v_idx)) {
1409 DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
1410 fb_helper_conn->connector->base.id);
1413 if (fb_helper_conn->connector->tile_h_loc < h_idx)
1414 hoffset += modes[i]->hdisplay;
1416 if (fb_helper_conn->connector->tile_v_loc < v_idx)
1417 voffset += modes[i]->vdisplay;
1419 offsets[idx].x = hoffset;
1420 offsets[idx].y = voffset;
1421 DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
1425 static bool drm_target_preferred(struct drm_fb_helper *fb_helper,
1426 struct drm_display_mode **modes,
1427 struct drm_fb_offset *offsets,
1428 bool *enabled, int width, int height)
1430 struct drm_fb_helper_connector *fb_helper_conn;
1432 uint64_t conn_configured = 0, mask;
1434 mask = (1 << fb_helper->connector_count) - 1;
1436 for (i = 0; i < fb_helper->connector_count; i++) {
1437 fb_helper_conn = fb_helper->connector_info[i];
1439 if (conn_configured & (1 << i))
1442 if (enabled[i] == false) {
1443 conn_configured |= (1 << i);
1447 /* first pass over all the untiled connectors */
1448 if (tile_pass == 0 && fb_helper_conn->connector->has_tile)
1451 if (tile_pass == 1) {
1452 if (fb_helper_conn->connector->tile_h_loc != 0 ||
1453 fb_helper_conn->connector->tile_v_loc != 0)
1457 if (fb_helper_conn->connector->tile_h_loc != tile_pass -1 &&
1458 fb_helper_conn->connector->tile_v_loc != tile_pass - 1)
1459 /* if this tile_pass doesn't cover any of the tiles - keep going */
1462 /* find the tile offsets for this pass - need
1463 to find all tiles left and above */
1464 drm_get_tile_offsets(fb_helper, modes, offsets,
1465 i, fb_helper_conn->connector->tile_h_loc, fb_helper_conn->connector->tile_v_loc);
1467 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
1468 fb_helper_conn->connector->base.id);
1470 /* got for command line mode first */
1471 modes[i] = drm_pick_cmdline_mode(fb_helper_conn, width, height);
1473 DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
1474 fb_helper_conn->connector->base.id, fb_helper_conn->connector->tile_group ? fb_helper_conn->connector->tile_group->id : 0);
1475 modes[i] = drm_has_preferred_mode(fb_helper_conn, width, height);
1477 /* No preferred modes, pick one off the list */
1478 if (!modes[i] && !list_empty(&fb_helper_conn->connector->modes)) {
1479 list_for_each_entry(modes[i], &fb_helper_conn->connector->modes, head)
1482 DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
1484 conn_configured |= (1 << i);
1487 if ((conn_configured & mask) != mask) {
1494 static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
1495 struct drm_fb_helper_crtc **best_crtcs,
1496 struct drm_display_mode **modes,
1497 int n, int width, int height)
1500 struct drm_device *dev = fb_helper->dev;
1501 struct drm_connector *connector;
1502 struct drm_connector_helper_funcs *connector_funcs;
1503 struct drm_encoder *encoder;
1504 int my_score, best_score, score;
1505 struct drm_fb_helper_crtc **crtcs, *crtc;
1506 struct drm_fb_helper_connector *fb_helper_conn;
1508 if (n == fb_helper->connector_count)
1511 fb_helper_conn = fb_helper->connector_info[n];
1512 connector = fb_helper_conn->connector;
1514 best_crtcs[n] = NULL;
1515 best_score = drm_pick_crtcs(fb_helper, best_crtcs, modes, n+1, width, height);
1516 if (modes[n] == NULL)
1519 crtcs = kzalloc(dev->mode_config.num_connector *
1520 sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
1525 if (connector->status == connector_status_connected)
1527 if (drm_has_cmdline_mode(fb_helper_conn))
1529 if (drm_has_preferred_mode(fb_helper_conn, width, height))
1532 connector_funcs = connector->helper_private;
1533 encoder = connector_funcs->best_encoder(connector);
1537 /* select a crtc for this connector and then attempt to configure
1538 remaining connectors */
1539 for (c = 0; c < fb_helper->crtc_count; c++) {
1540 crtc = &fb_helper->crtc_info[c];
1542 if ((encoder->possible_crtcs & (1 << c)) == 0)
1545 for (o = 0; o < n; o++)
1546 if (best_crtcs[o] == crtc)
1550 /* ignore cloning unless only a single crtc */
1551 if (fb_helper->crtc_count > 1)
1554 if (!drm_mode_equal(modes[o], modes[n]))
1559 memcpy(crtcs, best_crtcs, n * sizeof(struct drm_fb_helper_crtc *));
1560 score = my_score + drm_pick_crtcs(fb_helper, crtcs, modes, n + 1,
1562 if (score > best_score) {
1564 memcpy(best_crtcs, crtcs,
1565 dev->mode_config.num_connector *
1566 sizeof(struct drm_fb_helper_crtc *));
1574 static void drm_setup_crtcs(struct drm_fb_helper *fb_helper)
1576 struct drm_device *dev = fb_helper->dev;
1577 struct drm_fb_helper_crtc **crtcs;
1578 struct drm_display_mode **modes;
1579 struct drm_fb_offset *offsets;
1580 struct drm_mode_set *modeset;
1585 DRM_DEBUG_KMS("\n");
1587 width = dev->mode_config.max_width;
1588 height = dev->mode_config.max_height;
1590 crtcs = kcalloc(dev->mode_config.num_connector,
1591 sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
1592 modes = kcalloc(dev->mode_config.num_connector,
1593 sizeof(struct drm_display_mode *), GFP_KERNEL);
1594 offsets = kcalloc(dev->mode_config.num_connector,
1595 sizeof(struct drm_fb_offset), GFP_KERNEL);
1596 enabled = kcalloc(dev->mode_config.num_connector,
1597 sizeof(bool), GFP_KERNEL);
1598 if (!crtcs || !modes || !enabled || !offsets) {
1599 DRM_ERROR("Memory allocation failed\n");
1604 drm_enable_connectors(fb_helper, enabled);
1606 if (!(fb_helper->funcs->initial_config &&
1607 fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
1609 enabled, width, height))) {
1610 memset(modes, 0, dev->mode_config.num_connector*sizeof(modes[0]));
1611 memset(crtcs, 0, dev->mode_config.num_connector*sizeof(crtcs[0]));
1612 memset(offsets, 0, dev->mode_config.num_connector*sizeof(offsets[0]));
1614 if (!drm_target_cloned(fb_helper, modes, offsets,
1615 enabled, width, height) &&
1616 !drm_target_preferred(fb_helper, modes, offsets,
1617 enabled, width, height))
1618 DRM_ERROR("Unable to find initial modes\n");
1620 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
1623 drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
1626 /* need to set the modesets up here for use later */
1627 /* fill out the connector<->crtc mappings into the modesets */
1628 for (i = 0; i < fb_helper->crtc_count; i++) {
1629 modeset = &fb_helper->crtc_info[i].mode_set;
1630 modeset->num_connectors = 0;
1634 for (i = 0; i < fb_helper->connector_count; i++) {
1635 struct drm_display_mode *mode = modes[i];
1636 struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
1637 struct drm_fb_offset *offset = &offsets[i];
1638 modeset = &fb_crtc->mode_set;
1640 if (mode && fb_crtc) {
1641 DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
1642 mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y);
1643 fb_crtc->desired_mode = mode;
1644 fb_crtc->x = offset->x;
1645 fb_crtc->y = offset->y;
1647 drm_mode_destroy(dev, modeset->mode);
1648 modeset->mode = drm_mode_duplicate(dev,
1649 fb_crtc->desired_mode);
1650 modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector;
1651 modeset->fb = fb_helper->fb;
1652 modeset->x = offset->x;
1653 modeset->y = offset->y;
1657 /* Clear out any old modes if there are no more connected outputs. */
1658 for (i = 0; i < fb_helper->crtc_count; i++) {
1659 modeset = &fb_helper->crtc_info[i].mode_set;
1660 if (modeset->num_connectors == 0) {
1661 BUG_ON(modeset->fb);
1663 drm_mode_destroy(dev, modeset->mode);
1664 modeset->mode = NULL;
1675 * drm_fb_helper_initial_config - setup a sane initial connector configuration
1676 * @fb_helper: fb_helper device struct
1677 * @bpp_sel: bpp value to use for the framebuffer configuration
1679 * Scans the CRTCs and connectors and tries to put together an initial setup.
1680 * At the moment, this is a cloned configuration across all heads with
1681 * a new framebuffer object as the backing store.
1683 * Note that this also registers the fbdev and so allows userspace to call into
1684 * the driver through the fbdev interfaces.
1686 * This function will call down into the ->fb_probe callback to let
1687 * the driver allocate and initialize the fbdev info structure and the drm
1688 * framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
1689 * drm_fb_helper_fill_fix() are provided as helpers to setup simple default
1690 * values for the fbdev info structure.
1693 * Zero if everything went ok, nonzero otherwise.
1695 bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
1697 struct drm_device *dev = fb_helper->dev;
1700 mutex_lock(&dev->mode_config.mutex);
1701 count = drm_fb_helper_probe_connector_modes(fb_helper,
1702 dev->mode_config.max_width,
1703 dev->mode_config.max_height);
1704 mutex_unlock(&dev->mode_config.mutex);
1706 * we shouldn't end up with no modes here.
1709 dev_info(fb_helper->dev->dev, "No connectors reported connected with modes\n");
1711 drm_setup_crtcs(fb_helper);
1713 return drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
1715 EXPORT_SYMBOL(drm_fb_helper_initial_config);
1718 * drm_fb_helper_hotplug_event - respond to a hotplug notification by
1719 * probing all the outputs attached to the fb
1720 * @fb_helper: the drm_fb_helper
1722 * Scan the connectors attached to the fb_helper and try to put together a
1723 * setup after *notification of a change in output configuration.
1725 * Called at runtime, takes the mode config locks to be able to check/change the
1726 * modeset configuration. Must be run from process context (which usually means
1727 * either the output polling work or a work item launched from the driver's
1728 * hotplug interrupt).
1730 * Note that drivers may call this even before calling
1731 * drm_fb_helper_initial_config but only aftert drm_fb_helper_init. This allows
1732 * for a race-free fbcon setup and will make sure that the fbdev emulation will
1733 * not miss any hotplug events.
1736 * 0 on success and a non-zero error code otherwise.
1738 int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
1740 struct drm_device *dev = fb_helper->dev;
1741 u32 max_width, max_height;
1743 mutex_lock(&fb_helper->dev->mode_config.mutex);
1744 if (!fb_helper->fb || !drm_fb_helper_is_bound(fb_helper)) {
1745 fb_helper->delayed_hotplug = true;
1746 mutex_unlock(&fb_helper->dev->mode_config.mutex);
1749 DRM_DEBUG_KMS("\n");
1751 max_width = fb_helper->fb->width;
1752 max_height = fb_helper->fb->height;
1754 drm_fb_helper_probe_connector_modes(fb_helper, max_width, max_height);
1755 mutex_unlock(&fb_helper->dev->mode_config.mutex);
1757 drm_modeset_lock_all(dev);
1758 drm_setup_crtcs(fb_helper);
1759 drm_modeset_unlock_all(dev);
1760 drm_fb_helper_set_par(fb_helper->fbdev);
1764 EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
1766 /* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
1767 * but the module doesn't depend on any fb console symbols. At least
1768 * attempt to load fbcon to avoid leaving the system without a usable console.
1770 #if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
1771 static int __init drm_fb_helper_modinit(void)
1773 const char *name = "fbcon";
1774 struct module *fbcon;
1776 mutex_lock(&module_mutex);
1777 fbcon = find_module(name);
1778 mutex_unlock(&module_mutex);
1781 request_module_nowait(name);
1785 module_init(drm_fb_helper_modinit);