2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "intel_dsi.h"
40 #include "i915_trace.h"
41 #include <drm/drm_atomic.h>
42 #include <drm/drm_atomic_helper.h>
43 #include <drm/drm_dp_helper.h>
44 #include <drm/drm_crtc_helper.h>
45 #include <drm/drm_plane_helper.h>
46 #include <drm/drm_rect.h>
47 #include <linux/dma_remapping.h>
48 #include <linux/reservation.h>
49 #include <linux/dma-buf.h>
51 /* Primary plane formats for gen <= 3 */
52 static const uint32_t i8xx_primary_formats[] = {
59 /* Primary plane formats for gen >= 4 */
60 static const uint32_t i965_primary_formats[] = {
65 DRM_FORMAT_XRGB2101010,
66 DRM_FORMAT_XBGR2101010,
69 static const uint32_t skl_primary_formats[] = {
76 DRM_FORMAT_XRGB2101010,
77 DRM_FORMAT_XBGR2101010,
85 static const uint32_t intel_cursor_formats[] = {
89 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
90 struct intel_crtc_state *pipe_config);
91 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
92 struct intel_crtc_state *pipe_config);
94 static int intel_framebuffer_init(struct drm_device *dev,
95 struct intel_framebuffer *ifb,
96 struct drm_mode_fb_cmd2 *mode_cmd,
97 struct drm_i915_gem_object *obj);
98 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
99 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
100 static void intel_set_pipe_src_size(struct intel_crtc *intel_crtc);
101 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
102 struct intel_link_m_n *m_n,
103 struct intel_link_m_n *m2_n2);
104 static void ironlake_set_pipeconf(struct drm_crtc *crtc);
105 static void haswell_set_pipeconf(struct drm_crtc *crtc);
106 static void haswell_set_pipemisc(struct drm_crtc *crtc);
107 static void vlv_prepare_pll(struct intel_crtc *crtc,
108 const struct intel_crtc_state *pipe_config);
109 static void chv_prepare_pll(struct intel_crtc *crtc,
110 const struct intel_crtc_state *pipe_config);
111 static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
112 static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
113 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
114 struct intel_crtc_state *crtc_state);
115 static void skylake_pfit_enable(struct intel_crtc *crtc);
116 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
117 static void ironlake_pfit_enable(struct intel_crtc *crtc);
118 static void intel_modeset_setup_hw_state(struct drm_device *dev);
119 static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
127 int p2_slow, p2_fast;
130 typedef struct intel_limit intel_limit_t;
132 intel_range_t dot, vco, n, m, m1, m2, p, p1;
136 /* returns HPLL frequency in kHz */
137 static int valleyview_get_vco(struct drm_i915_private *dev_priv)
139 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
141 /* Obtain SKU information */
142 mutex_lock(&dev_priv->sb_lock);
143 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
144 CCK_FUSE_HPLL_FREQ_MASK;
145 mutex_unlock(&dev_priv->sb_lock);
147 return vco_freq[hpll_freq] * 1000;
150 int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
151 const char *name, u32 reg, int ref_freq)
156 mutex_lock(&dev_priv->sb_lock);
157 val = vlv_cck_read(dev_priv, reg);
158 mutex_unlock(&dev_priv->sb_lock);
160 divider = val & CCK_FREQUENCY_VALUES;
162 WARN((val & CCK_FREQUENCY_STATUS) !=
163 (divider << CCK_FREQUENCY_STATUS_SHIFT),
164 "%s change in progress\n", name);
166 return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1);
169 static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
170 const char *name, u32 reg)
172 if (dev_priv->hpll_freq == 0)
173 dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
175 return vlv_get_cck_clock(dev_priv, name, reg,
176 dev_priv->hpll_freq);
180 intel_pch_rawclk(struct drm_i915_private *dev_priv)
182 return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
186 intel_vlv_hrawclk(struct drm_i915_private *dev_priv)
188 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
189 CCK_DISPLAY_REF_CLOCK_CONTROL);
193 intel_g4x_hrawclk(struct drm_i915_private *dev_priv)
197 /* hrawclock is 1/4 the FSB frequency */
198 clkcfg = I915_READ(CLKCFG);
199 switch (clkcfg & CLKCFG_FSB_MASK) {
208 case CLKCFG_FSB_1067:
210 case CLKCFG_FSB_1333:
212 /* these two are just a guess; one of them might be right */
213 case CLKCFG_FSB_1600:
214 case CLKCFG_FSB_1600_ALT:
221 static void intel_update_rawclk(struct drm_i915_private *dev_priv)
223 if (HAS_PCH_SPLIT(dev_priv))
224 dev_priv->rawclk_freq = intel_pch_rawclk(dev_priv);
225 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
226 dev_priv->rawclk_freq = intel_vlv_hrawclk(dev_priv);
227 else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv))
228 dev_priv->rawclk_freq = intel_g4x_hrawclk(dev_priv);
230 return; /* no rawclk on other platforms, or no need to know it */
232 DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq);
235 static void intel_update_czclk(struct drm_i915_private *dev_priv)
237 if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
240 dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
241 CCK_CZ_CLOCK_CONTROL);
243 DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
246 static inline u32 /* units of 100MHz */
247 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
248 const struct intel_crtc_state *pipe_config)
250 if (HAS_DDI(dev_priv))
251 return pipe_config->port_clock; /* SPLL */
252 else if (IS_GEN5(dev_priv))
253 return ((I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2) * 10000;
258 static const intel_limit_t intel_limits_i8xx_dac = {
259 .dot = { .min = 25000, .max = 350000 },
260 .vco = { .min = 908000, .max = 1512000 },
261 .n = { .min = 2, .max = 16 },
262 .m = { .min = 96, .max = 140 },
263 .m1 = { .min = 18, .max = 26 },
264 .m2 = { .min = 6, .max = 16 },
265 .p = { .min = 4, .max = 128 },
266 .p1 = { .min = 2, .max = 33 },
267 .p2 = { .dot_limit = 165000,
268 .p2_slow = 4, .p2_fast = 2 },
271 static const intel_limit_t intel_limits_i8xx_dvo = {
272 .dot = { .min = 25000, .max = 350000 },
273 .vco = { .min = 908000, .max = 1512000 },
274 .n = { .min = 2, .max = 16 },
275 .m = { .min = 96, .max = 140 },
276 .m1 = { .min = 18, .max = 26 },
277 .m2 = { .min = 6, .max = 16 },
278 .p = { .min = 4, .max = 128 },
279 .p1 = { .min = 2, .max = 33 },
280 .p2 = { .dot_limit = 165000,
281 .p2_slow = 4, .p2_fast = 4 },
284 static const intel_limit_t intel_limits_i8xx_lvds = {
285 .dot = { .min = 25000, .max = 350000 },
286 .vco = { .min = 908000, .max = 1512000 },
287 .n = { .min = 2, .max = 16 },
288 .m = { .min = 96, .max = 140 },
289 .m1 = { .min = 18, .max = 26 },
290 .m2 = { .min = 6, .max = 16 },
291 .p = { .min = 4, .max = 128 },
292 .p1 = { .min = 1, .max = 6 },
293 .p2 = { .dot_limit = 165000,
294 .p2_slow = 14, .p2_fast = 7 },
297 static const intel_limit_t intel_limits_i9xx_sdvo = {
298 .dot = { .min = 20000, .max = 400000 },
299 .vco = { .min = 1400000, .max = 2800000 },
300 .n = { .min = 1, .max = 6 },
301 .m = { .min = 70, .max = 120 },
302 .m1 = { .min = 8, .max = 18 },
303 .m2 = { .min = 3, .max = 7 },
304 .p = { .min = 5, .max = 80 },
305 .p1 = { .min = 1, .max = 8 },
306 .p2 = { .dot_limit = 200000,
307 .p2_slow = 10, .p2_fast = 5 },
310 static const intel_limit_t intel_limits_i9xx_lvds = {
311 .dot = { .min = 20000, .max = 400000 },
312 .vco = { .min = 1400000, .max = 2800000 },
313 .n = { .min = 1, .max = 6 },
314 .m = { .min = 70, .max = 120 },
315 .m1 = { .min = 8, .max = 18 },
316 .m2 = { .min = 3, .max = 7 },
317 .p = { .min = 7, .max = 98 },
318 .p1 = { .min = 1, .max = 8 },
319 .p2 = { .dot_limit = 112000,
320 .p2_slow = 14, .p2_fast = 7 },
324 static const intel_limit_t intel_limits_g4x_sdvo = {
325 .dot = { .min = 25000, .max = 270000 },
326 .vco = { .min = 1750000, .max = 3500000},
327 .n = { .min = 1, .max = 4 },
328 .m = { .min = 104, .max = 138 },
329 .m1 = { .min = 17, .max = 23 },
330 .m2 = { .min = 5, .max = 11 },
331 .p = { .min = 10, .max = 30 },
332 .p1 = { .min = 1, .max = 3},
333 .p2 = { .dot_limit = 270000,
339 static const intel_limit_t intel_limits_g4x_hdmi = {
340 .dot = { .min = 22000, .max = 400000 },
341 .vco = { .min = 1750000, .max = 3500000},
342 .n = { .min = 1, .max = 4 },
343 .m = { .min = 104, .max = 138 },
344 .m1 = { .min = 16, .max = 23 },
345 .m2 = { .min = 5, .max = 11 },
346 .p = { .min = 5, .max = 80 },
347 .p1 = { .min = 1, .max = 8},
348 .p2 = { .dot_limit = 165000,
349 .p2_slow = 10, .p2_fast = 5 },
352 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
353 .dot = { .min = 20000, .max = 115000 },
354 .vco = { .min = 1750000, .max = 3500000 },
355 .n = { .min = 1, .max = 3 },
356 .m = { .min = 104, .max = 138 },
357 .m1 = { .min = 17, .max = 23 },
358 .m2 = { .min = 5, .max = 11 },
359 .p = { .min = 28, .max = 112 },
360 .p1 = { .min = 2, .max = 8 },
361 .p2 = { .dot_limit = 0,
362 .p2_slow = 14, .p2_fast = 14
366 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
367 .dot = { .min = 80000, .max = 224000 },
368 .vco = { .min = 1750000, .max = 3500000 },
369 .n = { .min = 1, .max = 3 },
370 .m = { .min = 104, .max = 138 },
371 .m1 = { .min = 17, .max = 23 },
372 .m2 = { .min = 5, .max = 11 },
373 .p = { .min = 14, .max = 42 },
374 .p1 = { .min = 2, .max = 6 },
375 .p2 = { .dot_limit = 0,
376 .p2_slow = 7, .p2_fast = 7
380 static const intel_limit_t intel_limits_pineview_sdvo = {
381 .dot = { .min = 20000, .max = 400000},
382 .vco = { .min = 1700000, .max = 3500000 },
383 /* Pineview's Ncounter is a ring counter */
384 .n = { .min = 3, .max = 6 },
385 .m = { .min = 2, .max = 256 },
386 /* Pineview only has one combined m divider, which we treat as m2. */
387 .m1 = { .min = 0, .max = 0 },
388 .m2 = { .min = 0, .max = 254 },
389 .p = { .min = 5, .max = 80 },
390 .p1 = { .min = 1, .max = 8 },
391 .p2 = { .dot_limit = 200000,
392 .p2_slow = 10, .p2_fast = 5 },
395 static const intel_limit_t intel_limits_pineview_lvds = {
396 .dot = { .min = 20000, .max = 400000 },
397 .vco = { .min = 1700000, .max = 3500000 },
398 .n = { .min = 3, .max = 6 },
399 .m = { .min = 2, .max = 256 },
400 .m1 = { .min = 0, .max = 0 },
401 .m2 = { .min = 0, .max = 254 },
402 .p = { .min = 7, .max = 112 },
403 .p1 = { .min = 1, .max = 8 },
404 .p2 = { .dot_limit = 112000,
405 .p2_slow = 14, .p2_fast = 14 },
408 /* Ironlake / Sandybridge
410 * We calculate clock using (register_value + 2) for N/M1/M2, so here
411 * the range value for them is (actual_value - 2).
413 static const intel_limit_t intel_limits_ironlake_dac = {
414 .dot = { .min = 25000, .max = 350000 },
415 .vco = { .min = 1760000, .max = 3510000 },
416 .n = { .min = 1, .max = 5 },
417 .m = { .min = 79, .max = 127 },
418 .m1 = { .min = 12, .max = 22 },
419 .m2 = { .min = 5, .max = 9 },
420 .p = { .min = 5, .max = 80 },
421 .p1 = { .min = 1, .max = 8 },
422 .p2 = { .dot_limit = 225000,
423 .p2_slow = 10, .p2_fast = 5 },
426 static const intel_limit_t intel_limits_ironlake_single_lvds = {
427 .dot = { .min = 25000, .max = 350000 },
428 .vco = { .min = 1760000, .max = 3510000 },
429 .n = { .min = 1, .max = 3 },
430 .m = { .min = 79, .max = 118 },
431 .m1 = { .min = 12, .max = 22 },
432 .m2 = { .min = 5, .max = 9 },
433 .p = { .min = 28, .max = 112 },
434 .p1 = { .min = 2, .max = 8 },
435 .p2 = { .dot_limit = 225000,
436 .p2_slow = 14, .p2_fast = 14 },
439 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
440 .dot = { .min = 25000, .max = 350000 },
441 .vco = { .min = 1760000, .max = 3510000 },
442 .n = { .min = 1, .max = 3 },
443 .m = { .min = 79, .max = 127 },
444 .m1 = { .min = 12, .max = 22 },
445 .m2 = { .min = 5, .max = 9 },
446 .p = { .min = 14, .max = 56 },
447 .p1 = { .min = 2, .max = 8 },
448 .p2 = { .dot_limit = 225000,
449 .p2_slow = 7, .p2_fast = 7 },
452 /* LVDS 100mhz refclk limits. */
453 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
454 .dot = { .min = 25000, .max = 350000 },
455 .vco = { .min = 1760000, .max = 3510000 },
456 .n = { .min = 1, .max = 2 },
457 .m = { .min = 79, .max = 126 },
458 .m1 = { .min = 12, .max = 22 },
459 .m2 = { .min = 5, .max = 9 },
460 .p = { .min = 28, .max = 112 },
461 .p1 = { .min = 2, .max = 8 },
462 .p2 = { .dot_limit = 225000,
463 .p2_slow = 14, .p2_fast = 14 },
466 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
467 .dot = { .min = 25000, .max = 350000 },
468 .vco = { .min = 1760000, .max = 3510000 },
469 .n = { .min = 1, .max = 3 },
470 .m = { .min = 79, .max = 126 },
471 .m1 = { .min = 12, .max = 22 },
472 .m2 = { .min = 5, .max = 9 },
473 .p = { .min = 14, .max = 42 },
474 .p1 = { .min = 2, .max = 6 },
475 .p2 = { .dot_limit = 225000,
476 .p2_slow = 7, .p2_fast = 7 },
479 static const intel_limit_t intel_limits_vlv = {
481 * These are the data rate limits (measured in fast clocks)
482 * since those are the strictest limits we have. The fast
483 * clock and actual rate limits are more relaxed, so checking
484 * them would make no difference.
486 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
487 .vco = { .min = 4000000, .max = 6000000 },
488 .n = { .min = 1, .max = 7 },
489 .m1 = { .min = 2, .max = 3 },
490 .m2 = { .min = 11, .max = 156 },
491 .p1 = { .min = 2, .max = 3 },
492 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
495 static const intel_limit_t intel_limits_chv = {
497 * These are the data rate limits (measured in fast clocks)
498 * since those are the strictest limits we have. The fast
499 * clock and actual rate limits are more relaxed, so checking
500 * them would make no difference.
502 .dot = { .min = 25000 * 5, .max = 540000 * 5},
503 .vco = { .min = 4800000, .max = 6480000 },
504 .n = { .min = 1, .max = 1 },
505 .m1 = { .min = 2, .max = 2 },
506 .m2 = { .min = 24 << 22, .max = 175 << 22 },
507 .p1 = { .min = 2, .max = 4 },
508 .p2 = { .p2_slow = 1, .p2_fast = 14 },
511 static const intel_limit_t intel_limits_bxt = {
512 /* FIXME: find real dot limits */
513 .dot = { .min = 0, .max = INT_MAX },
514 .vco = { .min = 4800000, .max = 6700000 },
515 .n = { .min = 1, .max = 1 },
516 .m1 = { .min = 2, .max = 2 },
517 /* FIXME: find real m2 limits */
518 .m2 = { .min = 2 << 22, .max = 255 << 22 },
519 .p1 = { .min = 2, .max = 4 },
520 .p2 = { .p2_slow = 1, .p2_fast = 20 },
524 needs_modeset(struct drm_crtc_state *state)
526 return drm_atomic_crtc_needs_modeset(state);
530 * Returns whether any output on the specified pipe is of the specified type
532 bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
534 struct drm_device *dev = crtc->base.dev;
535 struct intel_encoder *encoder;
537 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
538 if (encoder->type == type)
545 * Returns whether any output on the specified pipe will have the specified
546 * type after a staged modeset is complete, i.e., the same as
547 * intel_pipe_has_type() but looking at encoder->new_crtc instead of
550 static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
553 struct drm_atomic_state *state = crtc_state->base.state;
554 struct drm_connector *connector;
555 struct drm_connector_state *connector_state;
556 struct intel_encoder *encoder;
557 int i, num_connectors = 0;
559 for_each_connector_in_state(state, connector, connector_state, i) {
560 if (connector_state->crtc != crtc_state->base.crtc)
565 encoder = to_intel_encoder(connector_state->best_encoder);
566 if (encoder->type == type)
570 WARN_ON(num_connectors == 0);
576 * Platform specific helpers to calculate the port PLL loopback- (clock.m),
577 * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
578 * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
579 * The helpers' return value is the rate of the clock that is fed to the
580 * display engine's pipe which can be the above fast dot clock rate or a
581 * divided-down version of it.
583 /* m1 is reserved as 0 in Pineview, n is a ring counter */
584 static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock)
586 clock->m = clock->m2 + 2;
587 clock->p = clock->p1 * clock->p2;
588 if (WARN_ON(clock->n == 0 || clock->p == 0))
590 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
591 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
596 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
598 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
601 static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock)
603 clock->m = i9xx_dpll_compute_m(clock);
604 clock->p = clock->p1 * clock->p2;
605 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
607 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
608 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
613 static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock)
615 clock->m = clock->m1 * clock->m2;
616 clock->p = clock->p1 * clock->p2;
617 if (WARN_ON(clock->n == 0 || clock->p == 0))
619 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
620 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
622 return clock->dot / 5;
625 int chv_calc_dpll_params(int refclk, intel_clock_t *clock)
627 clock->m = clock->m1 * clock->m2;
628 clock->p = clock->p1 * clock->p2;
629 if (WARN_ON(clock->n == 0 || clock->p == 0))
631 clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
633 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
635 return clock->dot / 5;
638 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
640 * Returns whether the given set of divisors are valid for a given refclk with
641 * the given connectors.
644 static bool intel_PLL_is_valid(struct drm_device *dev,
645 const intel_limit_t *limit,
646 const intel_clock_t *clock)
648 if (clock->n < limit->n.min || limit->n.max < clock->n)
649 INTELPllInvalid("n out of range\n");
650 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
651 INTELPllInvalid("p1 out of range\n");
652 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
653 INTELPllInvalid("m2 out of range\n");
654 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
655 INTELPllInvalid("m1 out of range\n");
657 if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev) &&
658 !IS_CHERRYVIEW(dev) && !IS_BROXTON(dev))
659 if (clock->m1 <= clock->m2)
660 INTELPllInvalid("m1 <= m2\n");
662 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) && !IS_BROXTON(dev)) {
663 if (clock->p < limit->p.min || limit->p.max < clock->p)
664 INTELPllInvalid("p out of range\n");
665 if (clock->m < limit->m.min || limit->m.max < clock->m)
666 INTELPllInvalid("m out of range\n");
669 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
670 INTELPllInvalid("vco out of range\n");
671 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
672 * connector, etc., rather than just a single range.
674 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
675 INTELPllInvalid("dot out of range\n");
681 i9xx_select_p2_div(const intel_limit_t *limit,
682 const struct intel_crtc_state *crtc_state,
685 struct drm_device *dev = crtc_state->base.crtc->dev;
687 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
689 * For LVDS just rely on its current settings for dual-channel.
690 * We haven't figured out how to reliably set up different
691 * single/dual channel state, if we even can.
693 if (intel_is_dual_link_lvds(dev))
694 return limit->p2.p2_fast;
696 return limit->p2.p2_slow;
698 if (target < limit->p2.dot_limit)
699 return limit->p2.p2_slow;
701 return limit->p2.p2_fast;
706 * Returns a set of divisors for the desired target clock with the given
707 * refclk, or FALSE. The returned values represent the clock equation:
708 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
710 * Target and reference clocks are specified in kHz.
712 * If match_clock is provided, then best_clock P divider must match the P
713 * divider from @match_clock used for LVDS downclocking.
716 i9xx_find_best_dpll(const intel_limit_t *limit,
717 struct intel_crtc_state *crtc_state,
718 int target, int refclk, intel_clock_t *match_clock,
719 intel_clock_t *best_clock)
721 struct drm_device *dev = crtc_state->base.crtc->dev;
725 memset(best_clock, 0, sizeof(*best_clock));
727 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
729 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
731 for (clock.m2 = limit->m2.min;
732 clock.m2 <= limit->m2.max; clock.m2++) {
733 if (clock.m2 >= clock.m1)
735 for (clock.n = limit->n.min;
736 clock.n <= limit->n.max; clock.n++) {
737 for (clock.p1 = limit->p1.min;
738 clock.p1 <= limit->p1.max; clock.p1++) {
741 i9xx_calc_dpll_params(refclk, &clock);
742 if (!intel_PLL_is_valid(dev, limit,
746 clock.p != match_clock->p)
749 this_err = abs(clock.dot - target);
750 if (this_err < err) {
759 return (err != target);
763 * Returns a set of divisors for the desired target clock with the given
764 * refclk, or FALSE. The returned values represent the clock equation:
765 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
767 * Target and reference clocks are specified in kHz.
769 * If match_clock is provided, then best_clock P divider must match the P
770 * divider from @match_clock used for LVDS downclocking.
773 pnv_find_best_dpll(const intel_limit_t *limit,
774 struct intel_crtc_state *crtc_state,
775 int target, int refclk, intel_clock_t *match_clock,
776 intel_clock_t *best_clock)
778 struct drm_device *dev = crtc_state->base.crtc->dev;
782 memset(best_clock, 0, sizeof(*best_clock));
784 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
786 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
788 for (clock.m2 = limit->m2.min;
789 clock.m2 <= limit->m2.max; clock.m2++) {
790 for (clock.n = limit->n.min;
791 clock.n <= limit->n.max; clock.n++) {
792 for (clock.p1 = limit->p1.min;
793 clock.p1 <= limit->p1.max; clock.p1++) {
796 pnv_calc_dpll_params(refclk, &clock);
797 if (!intel_PLL_is_valid(dev, limit,
801 clock.p != match_clock->p)
804 this_err = abs(clock.dot - target);
805 if (this_err < err) {
814 return (err != target);
818 * Returns a set of divisors for the desired target clock with the given
819 * refclk, or FALSE. The returned values represent the clock equation:
820 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
822 * Target and reference clocks are specified in kHz.
824 * If match_clock is provided, then best_clock P divider must match the P
825 * divider from @match_clock used for LVDS downclocking.
828 g4x_find_best_dpll(const intel_limit_t *limit,
829 struct intel_crtc_state *crtc_state,
830 int target, int refclk, intel_clock_t *match_clock,
831 intel_clock_t *best_clock)
833 struct drm_device *dev = crtc_state->base.crtc->dev;
837 /* approximately equals target * 0.00585 */
838 int err_most = (target >> 8) + (target >> 9);
840 memset(best_clock, 0, sizeof(*best_clock));
842 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
844 max_n = limit->n.max;
845 /* based on hardware requirement, prefer smaller n to precision */
846 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
847 /* based on hardware requirement, prefere larger m1,m2 */
848 for (clock.m1 = limit->m1.max;
849 clock.m1 >= limit->m1.min; clock.m1--) {
850 for (clock.m2 = limit->m2.max;
851 clock.m2 >= limit->m2.min; clock.m2--) {
852 for (clock.p1 = limit->p1.max;
853 clock.p1 >= limit->p1.min; clock.p1--) {
856 i9xx_calc_dpll_params(refclk, &clock);
857 if (!intel_PLL_is_valid(dev, limit,
861 this_err = abs(clock.dot - target);
862 if (this_err < err_most) {
876 * Check if the calculated PLL configuration is more optimal compared to the
877 * best configuration and error found so far. Return the calculated error.
879 static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
880 const intel_clock_t *calculated_clock,
881 const intel_clock_t *best_clock,
882 unsigned int best_error_ppm,
883 unsigned int *error_ppm)
886 * For CHV ignore the error and consider only the P value.
887 * Prefer a bigger P value based on HW requirements.
889 if (IS_CHERRYVIEW(dev)) {
892 return calculated_clock->p > best_clock->p;
895 if (WARN_ON_ONCE(!target_freq))
898 *error_ppm = div_u64(1000000ULL *
899 abs(target_freq - calculated_clock->dot),
902 * Prefer a better P value over a better (smaller) error if the error
903 * is small. Ensure this preference for future configurations too by
904 * setting the error to 0.
906 if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
912 return *error_ppm + 10 < best_error_ppm;
916 * Returns a set of divisors for the desired target clock with the given
917 * refclk, or FALSE. The returned values represent the clock equation:
918 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
921 vlv_find_best_dpll(const intel_limit_t *limit,
922 struct intel_crtc_state *crtc_state,
923 int target, int refclk, intel_clock_t *match_clock,
924 intel_clock_t *best_clock)
926 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
927 struct drm_device *dev = crtc->base.dev;
929 unsigned int bestppm = 1000000;
930 /* min update 19.2 MHz */
931 int max_n = min(limit->n.max, refclk / 19200);
934 target *= 5; /* fast clock */
936 memset(best_clock, 0, sizeof(*best_clock));
938 /* based on hardware requirement, prefer smaller n to precision */
939 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
940 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
941 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
942 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
943 clock.p = clock.p1 * clock.p2;
944 /* based on hardware requirement, prefer bigger m1,m2 values */
945 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
948 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
951 vlv_calc_dpll_params(refclk, &clock);
953 if (!intel_PLL_is_valid(dev, limit,
957 if (!vlv_PLL_is_optimal(dev, target,
975 * Returns a set of divisors for the desired target clock with the given
976 * refclk, or FALSE. The returned values represent the clock equation:
977 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
980 chv_find_best_dpll(const intel_limit_t *limit,
981 struct intel_crtc_state *crtc_state,
982 int target, int refclk, intel_clock_t *match_clock,
983 intel_clock_t *best_clock)
985 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
986 struct drm_device *dev = crtc->base.dev;
987 unsigned int best_error_ppm;
992 memset(best_clock, 0, sizeof(*best_clock));
993 best_error_ppm = 1000000;
996 * Based on hardware doc, the n always set to 1, and m1 always
997 * set to 2. If requires to support 200Mhz refclk, we need to
998 * revisit this because n may not 1 anymore.
1000 clock.n = 1, clock.m1 = 2;
1001 target *= 5; /* fast clock */
1003 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
1004 for (clock.p2 = limit->p2.p2_fast;
1005 clock.p2 >= limit->p2.p2_slow;
1006 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
1007 unsigned int error_ppm;
1009 clock.p = clock.p1 * clock.p2;
1011 m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
1012 clock.n) << 22, refclk * clock.m1);
1014 if (m2 > INT_MAX/clock.m1)
1019 chv_calc_dpll_params(refclk, &clock);
1021 if (!intel_PLL_is_valid(dev, limit, &clock))
1024 if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
1025 best_error_ppm, &error_ppm))
1028 *best_clock = clock;
1029 best_error_ppm = error_ppm;
1037 bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
1038 intel_clock_t *best_clock)
1040 int refclk = 100000;
1041 const intel_limit_t *limit = &intel_limits_bxt;
1043 return chv_find_best_dpll(limit, crtc_state,
1044 target_clock, refclk, NULL, best_clock);
1047 bool intel_crtc_active(struct drm_crtc *crtc)
1049 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1051 /* Be paranoid as we can arrive here with only partial
1052 * state retrieved from the hardware during setup.
1054 * We can ditch the adjusted_mode.crtc_clock check as soon
1055 * as Haswell has gained clock readout/fastboot support.
1057 * We can ditch the crtc->primary->fb check as soon as we can
1058 * properly reconstruct framebuffers.
1060 * FIXME: The intel_crtc->active here should be switched to
1061 * crtc->state->active once we have proper CRTC states wired up
1064 return intel_crtc->active && crtc->primary->state->fb &&
1065 intel_crtc->config->base.adjusted_mode.crtc_clock;
1068 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
1071 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1072 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1074 return intel_crtc->config->cpu_transcoder;
1077 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
1079 struct drm_i915_private *dev_priv = dev->dev_private;
1080 i915_reg_t reg = PIPEDSL(pipe);
1085 line_mask = DSL_LINEMASK_GEN2;
1087 line_mask = DSL_LINEMASK_GEN3;
1089 line1 = I915_READ(reg) & line_mask;
1091 line2 = I915_READ(reg) & line_mask;
1093 return line1 == line2;
1097 * intel_wait_for_pipe_off - wait for pipe to turn off
1098 * @crtc: crtc whose pipe to wait for
1100 * After disabling a pipe, we can't wait for vblank in the usual way,
1101 * spinning on the vblank interrupt status bit, since we won't actually
1102 * see an interrupt when the pipe is disabled.
1104 * On Gen4 and above:
1105 * wait for the pipe register state bit to turn off
1108 * wait for the display line value to settle (it usually
1109 * ends up stopping at the start of the next frame).
1112 static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
1114 struct drm_device *dev = crtc->base.dev;
1115 struct drm_i915_private *dev_priv = dev->dev_private;
1116 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1117 enum pipe pipe = crtc->pipe;
1119 if (INTEL_INFO(dev)->gen >= 4) {
1120 i915_reg_t reg = PIPECONF(cpu_transcoder);
1122 /* Wait for the Pipe State to go off */
1123 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
1125 WARN(1, "pipe_off wait timed out\n");
1127 /* Wait for the display line to settle */
1128 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
1129 WARN(1, "pipe_off wait timed out\n");
1133 /* Only for pre-ILK configs */
1134 void assert_pll(struct drm_i915_private *dev_priv,
1135 enum pipe pipe, bool state)
1140 val = I915_READ(DPLL(pipe));
1141 cur_state = !!(val & DPLL_VCO_ENABLE);
1142 I915_STATE_WARN(cur_state != state,
1143 "PLL state assertion failure (expected %s, current %s)\n",
1144 onoff(state), onoff(cur_state));
1147 /* XXX: the dsi pll is shared between MIPI DSI ports */
1148 void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1153 mutex_lock(&dev_priv->sb_lock);
1154 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1155 mutex_unlock(&dev_priv->sb_lock);
1157 cur_state = val & DSI_PLL_VCO_EN;
1158 I915_STATE_WARN(cur_state != state,
1159 "DSI PLL state assertion failure (expected %s, current %s)\n",
1160 onoff(state), onoff(cur_state));
1163 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1164 enum pipe pipe, bool state)
1167 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1170 if (HAS_DDI(dev_priv)) {
1171 /* DDI does not have a specific FDI_TX register */
1172 u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
1173 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1175 u32 val = I915_READ(FDI_TX_CTL(pipe));
1176 cur_state = !!(val & FDI_TX_ENABLE);
1178 I915_STATE_WARN(cur_state != state,
1179 "FDI TX state assertion failure (expected %s, current %s)\n",
1180 onoff(state), onoff(cur_state));
1182 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1183 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1185 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1186 enum pipe pipe, bool state)
1191 val = I915_READ(FDI_RX_CTL(pipe));
1192 cur_state = !!(val & FDI_RX_ENABLE);
1193 I915_STATE_WARN(cur_state != state,
1194 "FDI RX state assertion failure (expected %s, current %s)\n",
1195 onoff(state), onoff(cur_state));
1197 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1198 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1200 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1205 /* ILK FDI PLL is always enabled */
1206 if (INTEL_INFO(dev_priv)->gen == 5)
1209 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1210 if (HAS_DDI(dev_priv))
1213 val = I915_READ(FDI_TX_CTL(pipe));
1214 I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1217 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1218 enum pipe pipe, bool state)
1223 val = I915_READ(FDI_RX_CTL(pipe));
1224 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1225 I915_STATE_WARN(cur_state != state,
1226 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1227 onoff(state), onoff(cur_state));
1230 void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1233 struct drm_device *dev = dev_priv->dev;
1236 enum pipe panel_pipe = PIPE_A;
1239 if (WARN_ON(HAS_DDI(dev)))
1242 if (HAS_PCH_SPLIT(dev)) {
1245 pp_reg = PCH_PP_CONTROL;
1246 port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
1248 if (port_sel == PANEL_PORT_SELECT_LVDS &&
1249 I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
1250 panel_pipe = PIPE_B;
1251 /* XXX: else fix for eDP */
1252 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1253 /* presumably write lock depends on pipe, not port select */
1254 pp_reg = VLV_PIPE_PP_CONTROL(pipe);
1257 pp_reg = PP_CONTROL;
1258 if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
1259 panel_pipe = PIPE_B;
1262 val = I915_READ(pp_reg);
1263 if (!(val & PANEL_POWER_ON) ||
1264 ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1267 I915_STATE_WARN(panel_pipe == pipe && locked,
1268 "panel assertion failure, pipe %c regs locked\n",
1272 static void assert_cursor(struct drm_i915_private *dev_priv,
1273 enum pipe pipe, bool state)
1275 struct drm_device *dev = dev_priv->dev;
1278 if (IS_845G(dev) || IS_I865G(dev))
1279 cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
1281 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1283 I915_STATE_WARN(cur_state != state,
1284 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1285 pipe_name(pipe), onoff(state), onoff(cur_state));
1287 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1288 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1290 void assert_pipe(struct drm_i915_private *dev_priv,
1291 enum pipe pipe, bool state)
1294 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1296 enum intel_display_power_domain power_domain;
1298 /* if we need the pipe quirk it must be always on */
1299 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1300 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1303 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
1304 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
1305 u32 val = I915_READ(PIPECONF(cpu_transcoder));
1306 cur_state = !!(val & PIPECONF_ENABLE);
1308 intel_display_power_put(dev_priv, power_domain);
1313 I915_STATE_WARN(cur_state != state,
1314 "pipe %c assertion failure (expected %s, current %s)\n",
1315 pipe_name(pipe), onoff(state), onoff(cur_state));
1318 static void assert_plane(struct drm_i915_private *dev_priv,
1319 enum plane plane, bool state)
1324 val = I915_READ(DSPCNTR(plane));
1325 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1326 I915_STATE_WARN(cur_state != state,
1327 "plane %c assertion failure (expected %s, current %s)\n",
1328 plane_name(plane), onoff(state), onoff(cur_state));
1331 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1332 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1334 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1337 struct drm_device *dev = dev_priv->dev;
1340 /* Primary planes are fixed to pipes on gen4+ */
1341 if (INTEL_INFO(dev)->gen >= 4) {
1342 u32 val = I915_READ(DSPCNTR(pipe));
1343 I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
1344 "plane %c assertion failure, should be disabled but not\n",
1349 /* Need to check both planes against the pipe */
1350 for_each_pipe(dev_priv, i) {
1351 u32 val = I915_READ(DSPCNTR(i));
1352 enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1353 DISPPLANE_SEL_PIPE_SHIFT;
1354 I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1355 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1356 plane_name(i), pipe_name(pipe));
1360 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1363 struct drm_device *dev = dev_priv->dev;
1366 if (INTEL_INFO(dev)->gen >= 9) {
1367 for_each_sprite(dev_priv, pipe, sprite) {
1368 u32 val = I915_READ(PLANE_CTL(pipe, sprite));
1369 I915_STATE_WARN(val & PLANE_CTL_ENABLE,
1370 "plane %d assertion failure, should be off on pipe %c but is still active\n",
1371 sprite, pipe_name(pipe));
1373 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1374 for_each_sprite(dev_priv, pipe, sprite) {
1375 u32 val = I915_READ(SPCNTR(pipe, sprite));
1376 I915_STATE_WARN(val & SP_ENABLE,
1377 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1378 sprite_name(pipe, sprite), pipe_name(pipe));
1380 } else if (INTEL_INFO(dev)->gen >= 7) {
1381 u32 val = I915_READ(SPRCTL(pipe));
1382 I915_STATE_WARN(val & SPRITE_ENABLE,
1383 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1384 plane_name(pipe), pipe_name(pipe));
1385 } else if (INTEL_INFO(dev)->gen >= 5) {
1386 u32 val = I915_READ(DVSCNTR(pipe));
1387 I915_STATE_WARN(val & DVS_ENABLE,
1388 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1389 plane_name(pipe), pipe_name(pipe));
1393 static void assert_vblank_disabled(struct drm_crtc *crtc)
1395 if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1396 drm_crtc_vblank_put(crtc);
1399 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1405 val = I915_READ(PCH_TRANSCONF(pipe));
1406 enabled = !!(val & TRANS_ENABLE);
1407 I915_STATE_WARN(enabled,
1408 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1412 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1413 enum pipe pipe, u32 port_sel, u32 val)
1415 if ((val & DP_PORT_EN) == 0)
1418 if (HAS_PCH_CPT(dev_priv)) {
1419 u32 trans_dp_ctl = I915_READ(TRANS_DP_CTL(pipe));
1420 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1422 } else if (IS_CHERRYVIEW(dev_priv)) {
1423 if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
1426 if ((val & DP_PIPE_MASK) != (pipe << 30))
1432 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1433 enum pipe pipe, u32 val)
1435 if ((val & SDVO_ENABLE) == 0)
1438 if (HAS_PCH_CPT(dev_priv)) {
1439 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1441 } else if (IS_CHERRYVIEW(dev_priv)) {
1442 if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
1445 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1451 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1452 enum pipe pipe, u32 val)
1454 if ((val & LVDS_PORT_EN) == 0)
1457 if (HAS_PCH_CPT(dev_priv)) {
1458 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1461 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1467 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1468 enum pipe pipe, u32 val)
1470 if ((val & ADPA_DAC_ENABLE) == 0)
1472 if (HAS_PCH_CPT(dev_priv)) {
1473 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1476 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1482 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1483 enum pipe pipe, i915_reg_t reg,
1486 u32 val = I915_READ(reg);
1487 I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1488 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1489 i915_mmio_reg_offset(reg), pipe_name(pipe));
1491 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & DP_PORT_EN) == 0
1492 && (val & DP_PIPEB_SELECT),
1493 "IBX PCH dp port still using transcoder B\n");
1496 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1497 enum pipe pipe, i915_reg_t reg)
1499 u32 val = I915_READ(reg);
1500 I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1501 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1502 i915_mmio_reg_offset(reg), pipe_name(pipe));
1504 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && (val & SDVO_ENABLE) == 0
1505 && (val & SDVO_PIPE_B_SELECT),
1506 "IBX PCH hdmi port still using transcoder B\n");
1509 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1514 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1515 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1516 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1518 val = I915_READ(PCH_ADPA);
1519 I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1520 "PCH VGA enabled on transcoder %c, should be disabled\n",
1523 val = I915_READ(PCH_LVDS);
1524 I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1525 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1528 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1529 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1530 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1533 static void _vlv_enable_pll(struct intel_crtc *crtc,
1534 const struct intel_crtc_state *pipe_config)
1536 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1537 enum pipe pipe = crtc->pipe;
1539 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1540 POSTING_READ(DPLL(pipe));
1543 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1544 DRM_ERROR("DPLL %d failed to lock\n", pipe);
1547 static void vlv_enable_pll(struct intel_crtc *crtc,
1548 const struct intel_crtc_state *pipe_config)
1550 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1551 enum pipe pipe = crtc->pipe;
1553 assert_pipe_disabled(dev_priv, pipe);
1555 /* PLL is protected by panel, make sure we can write it */
1556 assert_panel_unlocked(dev_priv, pipe);
1558 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1559 _vlv_enable_pll(crtc, pipe_config);
1561 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1562 POSTING_READ(DPLL_MD(pipe));
1566 static void _chv_enable_pll(struct intel_crtc *crtc,
1567 const struct intel_crtc_state *pipe_config)
1569 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1570 enum pipe pipe = crtc->pipe;
1571 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1574 mutex_lock(&dev_priv->sb_lock);
1576 /* Enable back the 10bit clock to display controller */
1577 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1578 tmp |= DPIO_DCLKP_EN;
1579 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1581 mutex_unlock(&dev_priv->sb_lock);
1584 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1589 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1591 /* Check PLL is locked */
1592 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1593 DRM_ERROR("PLL %d failed to lock\n", pipe);
1596 static void chv_enable_pll(struct intel_crtc *crtc,
1597 const struct intel_crtc_state *pipe_config)
1599 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1600 enum pipe pipe = crtc->pipe;
1602 assert_pipe_disabled(dev_priv, pipe);
1604 /* PLL is protected by panel, make sure we can write it */
1605 assert_panel_unlocked(dev_priv, pipe);
1607 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1608 _chv_enable_pll(crtc, pipe_config);
1610 if (pipe != PIPE_A) {
1612 * WaPixelRepeatModeFixForC0:chv
1614 * DPLLCMD is AWOL. Use chicken bits to propagate
1615 * the value from DPLLBMD to either pipe B or C.
1617 I915_WRITE(CBR4_VLV, pipe == PIPE_B ? CBR_DPLLBMD_PIPE_B : CBR_DPLLBMD_PIPE_C);
1618 I915_WRITE(DPLL_MD(PIPE_B), pipe_config->dpll_hw_state.dpll_md);
1619 I915_WRITE(CBR4_VLV, 0);
1620 dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;
1623 * DPLLB VGA mode also seems to cause problems.
1624 * We should always have it disabled.
1626 WARN_ON((I915_READ(DPLL(PIPE_B)) & DPLL_VGA_MODE_DIS) == 0);
1628 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1629 POSTING_READ(DPLL_MD(pipe));
1633 static int intel_num_dvo_pipes(struct drm_device *dev)
1635 struct intel_crtc *crtc;
1638 for_each_intel_crtc(dev, crtc)
1639 count += crtc->base.state->active &&
1640 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
1645 static void i9xx_enable_pll(struct intel_crtc *crtc)
1647 struct drm_device *dev = crtc->base.dev;
1648 struct drm_i915_private *dev_priv = dev->dev_private;
1649 i915_reg_t reg = DPLL(crtc->pipe);
1650 u32 dpll = crtc->config->dpll_hw_state.dpll;
1652 assert_pipe_disabled(dev_priv, crtc->pipe);
1654 /* PLL is protected by panel, make sure we can write it */
1655 if (IS_MOBILE(dev) && !IS_I830(dev))
1656 assert_panel_unlocked(dev_priv, crtc->pipe);
1658 /* Enable DVO 2x clock on both PLLs if necessary */
1659 if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
1661 * It appears to be important that we don't enable this
1662 * for the current pipe before otherwise configuring the
1663 * PLL. No idea how this should be handled if multiple
1664 * DVO outputs are enabled simultaneosly.
1666 dpll |= DPLL_DVO_2X_MODE;
1667 I915_WRITE(DPLL(!crtc->pipe),
1668 I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
1672 * Apparently we need to have VGA mode enabled prior to changing
1673 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
1674 * dividers, even though the register value does change.
1678 I915_WRITE(reg, dpll);
1680 /* Wait for the clocks to stabilize. */
1684 if (INTEL_INFO(dev)->gen >= 4) {
1685 I915_WRITE(DPLL_MD(crtc->pipe),
1686 crtc->config->dpll_hw_state.dpll_md);
1688 /* The pixel multiplier can only be updated once the
1689 * DPLL is enabled and the clocks are stable.
1691 * So write it again.
1693 I915_WRITE(reg, dpll);
1696 /* We do this three times for luck */
1697 I915_WRITE(reg, dpll);
1699 udelay(150); /* wait for warmup */
1700 I915_WRITE(reg, dpll);
1702 udelay(150); /* wait for warmup */
1703 I915_WRITE(reg, dpll);
1705 udelay(150); /* wait for warmup */
1709 * i9xx_disable_pll - disable a PLL
1710 * @dev_priv: i915 private structure
1711 * @pipe: pipe PLL to disable
1713 * Disable the PLL for @pipe, making sure the pipe is off first.
1715 * Note! This is for pre-ILK only.
1717 static void i9xx_disable_pll(struct intel_crtc *crtc)
1719 struct drm_device *dev = crtc->base.dev;
1720 struct drm_i915_private *dev_priv = dev->dev_private;
1721 enum pipe pipe = crtc->pipe;
1723 /* Disable DVO 2x clock on both PLLs if necessary */
1725 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
1726 !intel_num_dvo_pipes(dev)) {
1727 I915_WRITE(DPLL(PIPE_B),
1728 I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
1729 I915_WRITE(DPLL(PIPE_A),
1730 I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
1733 /* Don't disable pipe or pipe PLLs if needed */
1734 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1735 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1738 /* Make sure the pipe isn't still relying on us */
1739 assert_pipe_disabled(dev_priv, pipe);
1741 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
1742 POSTING_READ(DPLL(pipe));
1745 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1749 /* Make sure the pipe isn't still relying on us */
1750 assert_pipe_disabled(dev_priv, pipe);
1752 val = DPLL_INTEGRATED_REF_CLK_VLV |
1753 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1755 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1757 I915_WRITE(DPLL(pipe), val);
1758 POSTING_READ(DPLL(pipe));
1761 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1763 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1766 /* Make sure the pipe isn't still relying on us */
1767 assert_pipe_disabled(dev_priv, pipe);
1769 val = DPLL_SSC_REF_CLK_CHV |
1770 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1772 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1774 I915_WRITE(DPLL(pipe), val);
1775 POSTING_READ(DPLL(pipe));
1777 mutex_lock(&dev_priv->sb_lock);
1779 /* Disable 10bit clock to display controller */
1780 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1781 val &= ~DPIO_DCLKP_EN;
1782 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1784 mutex_unlock(&dev_priv->sb_lock);
1787 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1788 struct intel_digital_port *dport,
1789 unsigned int expected_mask)
1792 i915_reg_t dpll_reg;
1794 switch (dport->port) {
1796 port_mask = DPLL_PORTB_READY_MASK;
1800 port_mask = DPLL_PORTC_READY_MASK;
1802 expected_mask <<= 4;
1805 port_mask = DPLL_PORTD_READY_MASK;
1806 dpll_reg = DPIO_PHY_STATUS;
1812 if (wait_for((I915_READ(dpll_reg) & port_mask) == expected_mask, 1000))
1813 WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
1814 port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
1817 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1820 struct drm_device *dev = dev_priv->dev;
1821 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1822 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1824 uint32_t val, pipeconf_val;
1826 /* Make sure PCH DPLL is enabled */
1827 assert_shared_dpll_enabled(dev_priv, intel_crtc->config->shared_dpll);
1829 /* FDI must be feeding us bits for PCH ports */
1830 assert_fdi_tx_enabled(dev_priv, pipe);
1831 assert_fdi_rx_enabled(dev_priv, pipe);
1833 if (HAS_PCH_CPT(dev)) {
1834 /* Workaround: Set the timing override bit before enabling the
1835 * pch transcoder. */
1836 reg = TRANS_CHICKEN2(pipe);
1837 val = I915_READ(reg);
1838 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1839 I915_WRITE(reg, val);
1842 reg = PCH_TRANSCONF(pipe);
1843 val = I915_READ(reg);
1844 pipeconf_val = I915_READ(PIPECONF(pipe));
1846 if (HAS_PCH_IBX(dev_priv)) {
1848 * Make the BPC in transcoder be consistent with
1849 * that in pipeconf reg. For HDMI we must use 8bpc
1850 * here for both 8bpc and 12bpc.
1852 val &= ~PIPECONF_BPC_MASK;
1853 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
1854 val |= PIPECONF_8BPC;
1856 val |= pipeconf_val & PIPECONF_BPC_MASK;
1859 val &= ~TRANS_INTERLACE_MASK;
1860 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1861 if (HAS_PCH_IBX(dev_priv) &&
1862 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
1863 val |= TRANS_LEGACY_INTERLACED_ILK;
1865 val |= TRANS_INTERLACED;
1867 val |= TRANS_PROGRESSIVE;
1869 I915_WRITE(reg, val | TRANS_ENABLE);
1870 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1871 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1874 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1875 enum transcoder cpu_transcoder)
1877 u32 val, pipeconf_val;
1879 /* FDI must be feeding us bits for PCH ports */
1880 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1881 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1883 /* Workaround: set timing override bit. */
1884 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1885 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1886 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1889 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1891 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1892 PIPECONF_INTERLACED_ILK)
1893 val |= TRANS_INTERLACED;
1895 val |= TRANS_PROGRESSIVE;
1897 I915_WRITE(LPT_TRANSCONF, val);
1898 if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1899 DRM_ERROR("Failed to enable PCH transcoder\n");
1902 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1905 struct drm_device *dev = dev_priv->dev;
1909 /* FDI relies on the transcoder */
1910 assert_fdi_tx_disabled(dev_priv, pipe);
1911 assert_fdi_rx_disabled(dev_priv, pipe);
1913 /* Ports must be off as well */
1914 assert_pch_ports_disabled(dev_priv, pipe);
1916 reg = PCH_TRANSCONF(pipe);
1917 val = I915_READ(reg);
1918 val &= ~TRANS_ENABLE;
1919 I915_WRITE(reg, val);
1920 /* wait for PCH transcoder off, transcoder state */
1921 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1922 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1924 if (HAS_PCH_CPT(dev)) {
1925 /* Workaround: Clear the timing override chicken bit again. */
1926 reg = TRANS_CHICKEN2(pipe);
1927 val = I915_READ(reg);
1928 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1929 I915_WRITE(reg, val);
1933 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1937 val = I915_READ(LPT_TRANSCONF);
1938 val &= ~TRANS_ENABLE;
1939 I915_WRITE(LPT_TRANSCONF, val);
1940 /* wait for PCH transcoder off, transcoder state */
1941 if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1942 DRM_ERROR("Failed to disable PCH transcoder\n");
1944 /* Workaround: clear timing override bit. */
1945 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1946 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1947 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1951 * intel_enable_pipe - enable a pipe, asserting requirements
1952 * @crtc: crtc responsible for the pipe
1954 * Enable @crtc's pipe, making sure that various hardware specific requirements
1955 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1957 static void intel_enable_pipe(struct intel_crtc *crtc)
1959 struct drm_device *dev = crtc->base.dev;
1960 struct drm_i915_private *dev_priv = dev->dev_private;
1961 enum pipe pipe = crtc->pipe;
1962 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1963 enum pipe pch_transcoder;
1967 DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
1969 assert_planes_disabled(dev_priv, pipe);
1970 assert_cursor_disabled(dev_priv, pipe);
1971 assert_sprites_disabled(dev_priv, pipe);
1973 if (HAS_PCH_LPT(dev_priv))
1974 pch_transcoder = TRANSCODER_A;
1976 pch_transcoder = pipe;
1979 * A pipe without a PLL won't actually be able to drive bits from
1980 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1983 if (HAS_GMCH_DISPLAY(dev_priv))
1984 if (crtc->config->has_dsi_encoder)
1985 assert_dsi_pll_enabled(dev_priv);
1987 assert_pll_enabled(dev_priv, pipe);
1989 if (crtc->config->has_pch_encoder) {
1990 /* if driving the PCH, we need FDI enabled */
1991 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1992 assert_fdi_tx_pll_enabled(dev_priv,
1993 (enum pipe) cpu_transcoder);
1995 /* FIXME: assert CPU port conditions for SNB+ */
1998 reg = PIPECONF(cpu_transcoder);
1999 val = I915_READ(reg);
2000 if (val & PIPECONF_ENABLE) {
2001 WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
2002 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
2006 I915_WRITE(reg, val | PIPECONF_ENABLE);
2010 * Until the pipe starts DSL will read as 0, which would cause
2011 * an apparent vblank timestamp jump, which messes up also the
2012 * frame count when it's derived from the timestamps. So let's
2013 * wait for the pipe to start properly before we call
2014 * drm_crtc_vblank_on()
2016 if (dev->max_vblank_count == 0 &&
2017 wait_for(intel_get_crtc_scanline(crtc) != crtc->scanline_offset, 50))
2018 DRM_ERROR("pipe %c didn't start\n", pipe_name(pipe));
2022 * intel_disable_pipe - disable a pipe, asserting requirements
2023 * @crtc: crtc whose pipes is to be disabled
2025 * Disable the pipe of @crtc, making sure that various hardware
2026 * specific requirements are met, if applicable, e.g. plane
2027 * disabled, panel fitter off, etc.
2029 * Will wait until the pipe has shut down before returning.
2031 static void intel_disable_pipe(struct intel_crtc *crtc)
2033 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
2034 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
2035 enum pipe pipe = crtc->pipe;
2039 DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
2042 * Make sure planes won't keep trying to pump pixels to us,
2043 * or we might hang the display.
2045 assert_planes_disabled(dev_priv, pipe);
2046 assert_cursor_disabled(dev_priv, pipe);
2047 assert_sprites_disabled(dev_priv, pipe);
2049 reg = PIPECONF(cpu_transcoder);
2050 val = I915_READ(reg);
2051 if ((val & PIPECONF_ENABLE) == 0)
2055 * Double wide has implications for planes
2056 * so best keep it disabled when not needed.
2058 if (crtc->config->double_wide)
2059 val &= ~PIPECONF_DOUBLE_WIDE;
2061 /* Don't disable pipe or pipe PLLs if needed */
2062 if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
2063 !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
2064 val &= ~PIPECONF_ENABLE;
2066 I915_WRITE(reg, val);
2067 if ((val & PIPECONF_ENABLE) == 0)
2068 intel_wait_for_pipe_off(crtc);
2071 static bool need_vtd_wa(struct drm_device *dev)
2073 #ifdef CONFIG_INTEL_IOMMU
2074 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
2080 static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
2082 return IS_GEN2(dev_priv) ? 2048 : 4096;
2085 static unsigned int intel_tile_width_bytes(const struct drm_i915_private *dev_priv,
2086 uint64_t fb_modifier, unsigned int cpp)
2088 switch (fb_modifier) {
2089 case DRM_FORMAT_MOD_NONE:
2091 case I915_FORMAT_MOD_X_TILED:
2092 if (IS_GEN2(dev_priv))
2096 case I915_FORMAT_MOD_Y_TILED:
2097 if (IS_GEN2(dev_priv) || HAS_128_BYTE_Y_TILING(dev_priv))
2101 case I915_FORMAT_MOD_Yf_TILED:
2117 MISSING_CASE(fb_modifier);
2122 unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
2123 uint64_t fb_modifier, unsigned int cpp)
2125 if (fb_modifier == DRM_FORMAT_MOD_NONE)
2128 return intel_tile_size(dev_priv) /
2129 intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2132 /* Return the tile dimensions in pixel units */
2133 static void intel_tile_dims(const struct drm_i915_private *dev_priv,
2134 unsigned int *tile_width,
2135 unsigned int *tile_height,
2136 uint64_t fb_modifier,
2139 unsigned int tile_width_bytes =
2140 intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2142 *tile_width = tile_width_bytes / cpp;
2143 *tile_height = intel_tile_size(dev_priv) / tile_width_bytes;
2147 intel_fb_align_height(struct drm_device *dev, unsigned int height,
2148 uint32_t pixel_format, uint64_t fb_modifier)
2150 unsigned int cpp = drm_format_plane_cpp(pixel_format, 0);
2151 unsigned int tile_height = intel_tile_height(to_i915(dev), fb_modifier, cpp);
2153 return ALIGN(height, tile_height);
2156 unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
2158 unsigned int size = 0;
2161 for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
2162 size += rot_info->plane[i].width * rot_info->plane[i].height;
2168 intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
2169 const struct drm_framebuffer *fb,
2170 unsigned int rotation)
2172 if (intel_rotation_90_or_270(rotation)) {
2173 *view = i915_ggtt_view_rotated;
2174 view->params.rotated = to_intel_framebuffer(fb)->rot_info;
2176 *view = i915_ggtt_view_normal;
2181 intel_fill_fb_info(struct drm_i915_private *dev_priv,
2182 struct drm_framebuffer *fb)
2184 struct intel_rotation_info *info = &to_intel_framebuffer(fb)->rot_info;
2185 unsigned int tile_size, tile_width, tile_height, cpp;
2187 tile_size = intel_tile_size(dev_priv);
2189 cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2190 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2191 fb->modifier[0], cpp);
2193 info->plane[0].width = DIV_ROUND_UP(fb->pitches[0], tile_width * cpp);
2194 info->plane[0].height = DIV_ROUND_UP(fb->height, tile_height);
2196 if (info->pixel_format == DRM_FORMAT_NV12) {
2197 cpp = drm_format_plane_cpp(fb->pixel_format, 1);
2198 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2199 fb->modifier[1], cpp);
2201 info->uv_offset = fb->offsets[1];
2202 info->plane[1].width = DIV_ROUND_UP(fb->pitches[1], tile_width * cpp);
2203 info->plane[1].height = DIV_ROUND_UP(fb->height / 2, tile_height);
2207 static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
2209 if (INTEL_INFO(dev_priv)->gen >= 9)
2211 else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
2212 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2214 else if (INTEL_INFO(dev_priv)->gen >= 4)
2220 static unsigned int intel_surf_alignment(const struct drm_i915_private *dev_priv,
2221 uint64_t fb_modifier)
2223 switch (fb_modifier) {
2224 case DRM_FORMAT_MOD_NONE:
2225 return intel_linear_alignment(dev_priv);
2226 case I915_FORMAT_MOD_X_TILED:
2227 if (INTEL_INFO(dev_priv)->gen >= 9)
2230 case I915_FORMAT_MOD_Y_TILED:
2231 case I915_FORMAT_MOD_Yf_TILED:
2232 return 1 * 1024 * 1024;
2234 MISSING_CASE(fb_modifier);
2240 intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
2241 unsigned int rotation)
2243 struct drm_device *dev = fb->dev;
2244 struct drm_i915_private *dev_priv = dev->dev_private;
2245 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2246 struct i915_ggtt_view view;
2250 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
2252 alignment = intel_surf_alignment(dev_priv, fb->modifier[0]);
2254 intel_fill_fb_ggtt_view(&view, fb, rotation);
2256 /* Note that the w/a also requires 64 PTE of padding following the
2257 * bo. We currently fill all unused PTE with the shadow page and so
2258 * we should always have valid PTE following the scanout preventing
2261 if (need_vtd_wa(dev) && alignment < 256 * 1024)
2262 alignment = 256 * 1024;
2265 * Global gtt pte registers are special registers which actually forward
2266 * writes to a chunk of system memory. Which means that there is no risk
2267 * that the register values disappear as soon as we call
2268 * intel_runtime_pm_put(), so it is correct to wrap only the
2269 * pin/unpin/fence and not more.
2271 intel_runtime_pm_get(dev_priv);
2273 ret = i915_gem_object_pin_to_display_plane(obj, alignment,
2278 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2279 * fence, whereas 965+ only requires a fence if using
2280 * framebuffer compression. For simplicity, we always install
2281 * a fence as the cost is not that onerous.
2283 if (view.type == I915_GGTT_VIEW_NORMAL) {
2284 ret = i915_gem_object_get_fence(obj);
2285 if (ret == -EDEADLK) {
2287 * -EDEADLK means there are no free fences
2290 * This is propagated to atomic, but it uses
2291 * -EDEADLK to force a locking recovery, so
2292 * change the returned error to -EBUSY.
2299 i915_gem_object_pin_fence(obj);
2302 intel_runtime_pm_put(dev_priv);
2306 i915_gem_object_unpin_from_display_plane(obj, &view);
2308 intel_runtime_pm_put(dev_priv);
2312 static void intel_unpin_fb_obj(struct drm_framebuffer *fb, unsigned int rotation)
2314 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2315 struct i915_ggtt_view view;
2317 WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
2319 intel_fill_fb_ggtt_view(&view, fb, rotation);
2321 if (view.type == I915_GGTT_VIEW_NORMAL)
2322 i915_gem_object_unpin_fence(obj);
2324 i915_gem_object_unpin_from_display_plane(obj, &view);
2328 * Adjust the tile offset by moving the difference into
2331 * Input tile dimensions and pitch must already be
2332 * rotated to match x and y, and in pixel units.
2334 static u32 intel_adjust_tile_offset(int *x, int *y,
2335 unsigned int tile_width,
2336 unsigned int tile_height,
2337 unsigned int tile_size,
2338 unsigned int pitch_tiles,
2344 WARN_ON(old_offset & (tile_size - 1));
2345 WARN_ON(new_offset & (tile_size - 1));
2346 WARN_ON(new_offset > old_offset);
2348 tiles = (old_offset - new_offset) / tile_size;
2350 *y += tiles / pitch_tiles * tile_height;
2351 *x += tiles % pitch_tiles * tile_width;
2357 * Computes the linear offset to the base tile and adjusts
2358 * x, y. bytes per pixel is assumed to be a power-of-two.
2360 * In the 90/270 rotated case, x and y are assumed
2361 * to be already rotated to match the rotated GTT view, and
2362 * pitch is the tile_height aligned framebuffer height.
2364 u32 intel_compute_tile_offset(int *x, int *y,
2365 const struct drm_framebuffer *fb, int plane,
2367 unsigned int rotation)
2369 const struct drm_i915_private *dev_priv = to_i915(fb->dev);
2370 uint64_t fb_modifier = fb->modifier[plane];
2371 unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
2372 u32 offset, offset_aligned, alignment;
2374 alignment = intel_surf_alignment(dev_priv, fb_modifier);
2378 if (fb_modifier != DRM_FORMAT_MOD_NONE) {
2379 unsigned int tile_size, tile_width, tile_height;
2380 unsigned int tile_rows, tiles, pitch_tiles;
2382 tile_size = intel_tile_size(dev_priv);
2383 intel_tile_dims(dev_priv, &tile_width, &tile_height,
2386 if (intel_rotation_90_or_270(rotation)) {
2387 pitch_tiles = pitch / tile_height;
2388 swap(tile_width, tile_height);
2390 pitch_tiles = pitch / (tile_width * cpp);
2393 tile_rows = *y / tile_height;
2396 tiles = *x / tile_width;
2399 offset = (tile_rows * pitch_tiles + tiles) * tile_size;
2400 offset_aligned = offset & ~alignment;
2402 intel_adjust_tile_offset(x, y, tile_width, tile_height,
2403 tile_size, pitch_tiles,
2404 offset, offset_aligned);
2406 offset = *y * pitch + *x * cpp;
2407 offset_aligned = offset & ~alignment;
2409 *y = (offset & alignment) / pitch;
2410 *x = ((offset & alignment) - *y * pitch) / cpp;
2413 return offset_aligned;
2416 static int i9xx_format_to_fourcc(int format)
2419 case DISPPLANE_8BPP:
2420 return DRM_FORMAT_C8;
2421 case DISPPLANE_BGRX555:
2422 return DRM_FORMAT_XRGB1555;
2423 case DISPPLANE_BGRX565:
2424 return DRM_FORMAT_RGB565;
2426 case DISPPLANE_BGRX888:
2427 return DRM_FORMAT_XRGB8888;
2428 case DISPPLANE_RGBX888:
2429 return DRM_FORMAT_XBGR8888;
2430 case DISPPLANE_BGRX101010:
2431 return DRM_FORMAT_XRGB2101010;
2432 case DISPPLANE_RGBX101010:
2433 return DRM_FORMAT_XBGR2101010;
2437 static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
2440 case PLANE_CTL_FORMAT_RGB_565:
2441 return DRM_FORMAT_RGB565;
2443 case PLANE_CTL_FORMAT_XRGB_8888:
2446 return DRM_FORMAT_ABGR8888;
2448 return DRM_FORMAT_XBGR8888;
2451 return DRM_FORMAT_ARGB8888;
2453 return DRM_FORMAT_XRGB8888;
2455 case PLANE_CTL_FORMAT_XRGB_2101010:
2457 return DRM_FORMAT_XBGR2101010;
2459 return DRM_FORMAT_XRGB2101010;
2464 intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
2465 struct intel_initial_plane_config *plane_config)
2467 struct drm_device *dev = crtc->base.dev;
2468 struct drm_i915_private *dev_priv = to_i915(dev);
2469 struct i915_ggtt *ggtt = &dev_priv->ggtt;
2470 struct drm_i915_gem_object *obj = NULL;
2471 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2472 struct drm_framebuffer *fb = &plane_config->fb->base;
2473 u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
2474 u32 size_aligned = round_up(plane_config->base + plane_config->size,
2477 size_aligned -= base_aligned;
2479 if (plane_config->size == 0)
2482 /* If the FB is too big, just don't use it since fbdev is not very
2483 * important and we should probably use that space with FBC or other
2485 if (size_aligned * 2 > ggtt->stolen_usable_size)
2488 mutex_lock(&dev->struct_mutex);
2490 obj = i915_gem_object_create_stolen_for_preallocated(dev,
2495 mutex_unlock(&dev->struct_mutex);
2499 obj->tiling_mode = plane_config->tiling;
2500 if (obj->tiling_mode == I915_TILING_X)
2501 obj->stride = fb->pitches[0];
2503 mode_cmd.pixel_format = fb->pixel_format;
2504 mode_cmd.width = fb->width;
2505 mode_cmd.height = fb->height;
2506 mode_cmd.pitches[0] = fb->pitches[0];
2507 mode_cmd.modifier[0] = fb->modifier[0];
2508 mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
2510 if (intel_framebuffer_init(dev, to_intel_framebuffer(fb),
2512 DRM_DEBUG_KMS("intel fb init failed\n");
2516 mutex_unlock(&dev->struct_mutex);
2518 DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
2522 drm_gem_object_unreference(&obj->base);
2523 mutex_unlock(&dev->struct_mutex);
2527 /* Update plane->state->fb to match plane->fb after driver-internal updates */
2529 update_state_fb(struct drm_plane *plane)
2531 if (plane->fb == plane->state->fb)
2534 if (plane->state->fb)
2535 drm_framebuffer_unreference(plane->state->fb);
2536 plane->state->fb = plane->fb;
2537 if (plane->state->fb)
2538 drm_framebuffer_reference(plane->state->fb);
2542 intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
2543 struct intel_initial_plane_config *plane_config)
2545 struct drm_device *dev = intel_crtc->base.dev;
2546 struct drm_i915_private *dev_priv = dev->dev_private;
2548 struct intel_crtc *i;
2549 struct drm_i915_gem_object *obj;
2550 struct drm_plane *primary = intel_crtc->base.primary;
2551 struct drm_plane_state *plane_state = primary->state;
2552 struct drm_crtc_state *crtc_state = intel_crtc->base.state;
2553 struct intel_plane *intel_plane = to_intel_plane(primary);
2554 struct intel_plane_state *intel_state =
2555 to_intel_plane_state(plane_state);
2556 struct drm_framebuffer *fb;
2558 if (!plane_config->fb)
2561 if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
2562 fb = &plane_config->fb->base;
2566 kfree(plane_config->fb);
2569 * Failed to alloc the obj, check to see if we should share
2570 * an fb with another CRTC instead
2572 for_each_crtc(dev, c) {
2573 i = to_intel_crtc(c);
2575 if (c == &intel_crtc->base)
2581 fb = c->primary->fb;
2585 obj = intel_fb_obj(fb);
2586 if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
2587 drm_framebuffer_reference(fb);
2593 * We've failed to reconstruct the BIOS FB. Current display state
2594 * indicates that the primary plane is visible, but has a NULL FB,
2595 * which will lead to problems later if we don't fix it up. The
2596 * simplest solution is to just disable the primary plane now and
2597 * pretend the BIOS never had it enabled.
2599 to_intel_plane_state(plane_state)->visible = false;
2600 crtc_state->plane_mask &= ~(1 << drm_plane_index(primary));
2601 intel_pre_disable_primary_noatomic(&intel_crtc->base);
2602 intel_plane->disable_plane(primary, &intel_crtc->base);
2607 plane_state->src_x = 0;
2608 plane_state->src_y = 0;
2609 plane_state->src_w = fb->width << 16;
2610 plane_state->src_h = fb->height << 16;
2612 plane_state->crtc_x = 0;
2613 plane_state->crtc_y = 0;
2614 plane_state->crtc_w = fb->width;
2615 plane_state->crtc_h = fb->height;
2617 intel_state->src.x1 = plane_state->src_x;
2618 intel_state->src.y1 = plane_state->src_y;
2619 intel_state->src.x2 = plane_state->src_x + plane_state->src_w;
2620 intel_state->src.y2 = plane_state->src_y + plane_state->src_h;
2621 intel_state->dst.x1 = plane_state->crtc_x;
2622 intel_state->dst.y1 = plane_state->crtc_y;
2623 intel_state->dst.x2 = plane_state->crtc_x + plane_state->crtc_w;
2624 intel_state->dst.y2 = plane_state->crtc_y + plane_state->crtc_h;
2626 obj = intel_fb_obj(fb);
2627 if (obj->tiling_mode != I915_TILING_NONE)
2628 dev_priv->preserve_bios_swizzle = true;
2630 drm_framebuffer_reference(fb);
2631 primary->fb = primary->state->fb = fb;
2632 primary->crtc = primary->state->crtc = &intel_crtc->base;
2633 intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
2634 obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
2637 static void i9xx_update_primary_plane(struct drm_plane *primary,
2638 const struct intel_crtc_state *crtc_state,
2639 const struct intel_plane_state *plane_state)
2641 struct drm_device *dev = primary->dev;
2642 struct drm_i915_private *dev_priv = dev->dev_private;
2643 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
2644 struct drm_framebuffer *fb = plane_state->base.fb;
2645 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2646 int plane = intel_crtc->plane;
2649 i915_reg_t reg = DSPCNTR(plane);
2650 unsigned int rotation = plane_state->base.rotation;
2651 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2652 int x = plane_state->src.x1 >> 16;
2653 int y = plane_state->src.y1 >> 16;
2655 dspcntr = DISPPLANE_GAMMA_ENABLE;
2657 dspcntr |= DISPLAY_PLANE_ENABLE;
2659 if (INTEL_INFO(dev)->gen < 4) {
2660 if (intel_crtc->pipe == PIPE_B)
2661 dspcntr |= DISPPLANE_SEL_PIPE_B;
2663 /* pipesrc and dspsize control the size that is scaled from,
2664 * which should always be the user's requested size.
2666 I915_WRITE(DSPSIZE(plane),
2667 ((crtc_state->pipe_src_h - 1) << 16) |
2668 (crtc_state->pipe_src_w - 1));
2669 I915_WRITE(DSPPOS(plane), 0);
2670 } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
2671 I915_WRITE(PRIMSIZE(plane),
2672 ((crtc_state->pipe_src_h - 1) << 16) |
2673 (crtc_state->pipe_src_w - 1));
2674 I915_WRITE(PRIMPOS(plane), 0);
2675 I915_WRITE(PRIMCNSTALPHA(plane), 0);
2678 switch (fb->pixel_format) {
2680 dspcntr |= DISPPLANE_8BPP;
2682 case DRM_FORMAT_XRGB1555:
2683 dspcntr |= DISPPLANE_BGRX555;
2685 case DRM_FORMAT_RGB565:
2686 dspcntr |= DISPPLANE_BGRX565;
2688 case DRM_FORMAT_XRGB8888:
2689 dspcntr |= DISPPLANE_BGRX888;
2691 case DRM_FORMAT_XBGR8888:
2692 dspcntr |= DISPPLANE_RGBX888;
2694 case DRM_FORMAT_XRGB2101010:
2695 dspcntr |= DISPPLANE_BGRX101010;
2697 case DRM_FORMAT_XBGR2101010:
2698 dspcntr |= DISPPLANE_RGBX101010;
2704 if (INTEL_INFO(dev)->gen >= 4 &&
2705 obj->tiling_mode != I915_TILING_NONE)
2706 dspcntr |= DISPPLANE_TILED;
2709 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2711 linear_offset = y * fb->pitches[0] + x * cpp;
2713 if (INTEL_INFO(dev)->gen >= 4) {
2714 intel_crtc->dspaddr_offset =
2715 intel_compute_tile_offset(&x, &y, fb, 0,
2716 fb->pitches[0], rotation);
2717 linear_offset -= intel_crtc->dspaddr_offset;
2719 intel_crtc->dspaddr_offset = linear_offset;
2722 if (rotation == BIT(DRM_ROTATE_180)) {
2723 dspcntr |= DISPPLANE_ROTATE_180;
2725 x += (crtc_state->pipe_src_w - 1);
2726 y += (crtc_state->pipe_src_h - 1);
2728 /* Finding the last pixel of the last line of the display
2729 data and adding to linear_offset*/
2731 (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
2732 (crtc_state->pipe_src_w - 1) * cpp;
2735 intel_crtc->adjusted_x = x;
2736 intel_crtc->adjusted_y = y;
2738 I915_WRITE(reg, dspcntr);
2740 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2741 if (INTEL_INFO(dev)->gen >= 4) {
2742 I915_WRITE(DSPSURF(plane),
2743 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2744 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2745 I915_WRITE(DSPLINOFF(plane), linear_offset);
2747 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2751 static void i9xx_disable_primary_plane(struct drm_plane *primary,
2752 struct drm_crtc *crtc)
2754 struct drm_device *dev = crtc->dev;
2755 struct drm_i915_private *dev_priv = dev->dev_private;
2756 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2757 int plane = intel_crtc->plane;
2759 I915_WRITE(DSPCNTR(plane), 0);
2760 if (INTEL_INFO(dev_priv)->gen >= 4)
2761 I915_WRITE(DSPSURF(plane), 0);
2763 I915_WRITE(DSPADDR(plane), 0);
2764 POSTING_READ(DSPCNTR(plane));
2767 static void ironlake_update_primary_plane(struct drm_plane *primary,
2768 const struct intel_crtc_state *crtc_state,
2769 const struct intel_plane_state *plane_state)
2771 struct drm_device *dev = primary->dev;
2772 struct drm_i915_private *dev_priv = dev->dev_private;
2773 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
2774 struct drm_framebuffer *fb = plane_state->base.fb;
2775 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2776 int plane = intel_crtc->plane;
2779 i915_reg_t reg = DSPCNTR(plane);
2780 unsigned int rotation = plane_state->base.rotation;
2781 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
2782 int x = plane_state->src.x1 >> 16;
2783 int y = plane_state->src.y1 >> 16;
2785 dspcntr = DISPPLANE_GAMMA_ENABLE;
2786 dspcntr |= DISPLAY_PLANE_ENABLE;
2788 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2789 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
2791 switch (fb->pixel_format) {
2793 dspcntr |= DISPPLANE_8BPP;
2795 case DRM_FORMAT_RGB565:
2796 dspcntr |= DISPPLANE_BGRX565;
2798 case DRM_FORMAT_XRGB8888:
2799 dspcntr |= DISPPLANE_BGRX888;
2801 case DRM_FORMAT_XBGR8888:
2802 dspcntr |= DISPPLANE_RGBX888;
2804 case DRM_FORMAT_XRGB2101010:
2805 dspcntr |= DISPPLANE_BGRX101010;
2807 case DRM_FORMAT_XBGR2101010:
2808 dspcntr |= DISPPLANE_RGBX101010;
2814 if (obj->tiling_mode != I915_TILING_NONE)
2815 dspcntr |= DISPPLANE_TILED;
2817 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
2818 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2820 linear_offset = y * fb->pitches[0] + x * cpp;
2821 intel_crtc->dspaddr_offset =
2822 intel_compute_tile_offset(&x, &y, fb, 0,
2823 fb->pitches[0], rotation);
2824 linear_offset -= intel_crtc->dspaddr_offset;
2825 if (rotation == BIT(DRM_ROTATE_180)) {
2826 dspcntr |= DISPPLANE_ROTATE_180;
2828 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
2829 x += (crtc_state->pipe_src_w - 1);
2830 y += (crtc_state->pipe_src_h - 1);
2832 /* Finding the last pixel of the last line of the display
2833 data and adding to linear_offset*/
2835 (crtc_state->pipe_src_h - 1) * fb->pitches[0] +
2836 (crtc_state->pipe_src_w - 1) * cpp;
2840 intel_crtc->adjusted_x = x;
2841 intel_crtc->adjusted_y = y;
2843 I915_WRITE(reg, dspcntr);
2845 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2846 I915_WRITE(DSPSURF(plane),
2847 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2848 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2849 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2851 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2852 I915_WRITE(DSPLINOFF(plane), linear_offset);
2857 u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv,
2858 uint64_t fb_modifier, uint32_t pixel_format)
2860 if (fb_modifier == DRM_FORMAT_MOD_NONE) {
2863 int cpp = drm_format_plane_cpp(pixel_format, 0);
2865 return intel_tile_width_bytes(dev_priv, fb_modifier, cpp);
2869 u32 intel_plane_obj_offset(struct intel_plane *intel_plane,
2870 struct drm_i915_gem_object *obj,
2873 struct i915_ggtt_view view;
2874 struct i915_vma *vma;
2877 intel_fill_fb_ggtt_view(&view, intel_plane->base.state->fb,
2878 intel_plane->base.state->rotation);
2880 vma = i915_gem_obj_to_ggtt_view(obj, &view);
2881 if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
2885 offset = vma->node.start;
2888 offset += vma->ggtt_view.params.rotated.uv_start_page *
2892 WARN_ON(upper_32_bits(offset));
2894 return lower_32_bits(offset);
2897 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
2899 struct drm_device *dev = intel_crtc->base.dev;
2900 struct drm_i915_private *dev_priv = dev->dev_private;
2902 I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
2903 I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
2904 I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
2908 * This function detaches (aka. unbinds) unused scalers in hardware
2910 static void skl_detach_scalers(struct intel_crtc *intel_crtc)
2912 struct intel_crtc_scaler_state *scaler_state;
2915 scaler_state = &intel_crtc->config->scaler_state;
2917 /* loop through and disable scalers that aren't in use */
2918 for (i = 0; i < intel_crtc->num_scalers; i++) {
2919 if (!scaler_state->scalers[i].in_use)
2920 skl_detach_scaler(intel_crtc, i);
2924 u32 skl_plane_ctl_format(uint32_t pixel_format)
2926 switch (pixel_format) {
2928 return PLANE_CTL_FORMAT_INDEXED;
2929 case DRM_FORMAT_RGB565:
2930 return PLANE_CTL_FORMAT_RGB_565;
2931 case DRM_FORMAT_XBGR8888:
2932 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
2933 case DRM_FORMAT_XRGB8888:
2934 return PLANE_CTL_FORMAT_XRGB_8888;
2936 * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
2937 * to be already pre-multiplied. We need to add a knob (or a different
2938 * DRM_FORMAT) for user-space to configure that.
2940 case DRM_FORMAT_ABGR8888:
2941 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
2942 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
2943 case DRM_FORMAT_ARGB8888:
2944 return PLANE_CTL_FORMAT_XRGB_8888 |
2945 PLANE_CTL_ALPHA_SW_PREMULTIPLY;
2946 case DRM_FORMAT_XRGB2101010:
2947 return PLANE_CTL_FORMAT_XRGB_2101010;
2948 case DRM_FORMAT_XBGR2101010:
2949 return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
2950 case DRM_FORMAT_YUYV:
2951 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
2952 case DRM_FORMAT_YVYU:
2953 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
2954 case DRM_FORMAT_UYVY:
2955 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
2956 case DRM_FORMAT_VYUY:
2957 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
2959 MISSING_CASE(pixel_format);
2965 u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
2967 switch (fb_modifier) {
2968 case DRM_FORMAT_MOD_NONE:
2970 case I915_FORMAT_MOD_X_TILED:
2971 return PLANE_CTL_TILED_X;
2972 case I915_FORMAT_MOD_Y_TILED:
2973 return PLANE_CTL_TILED_Y;
2974 case I915_FORMAT_MOD_Yf_TILED:
2975 return PLANE_CTL_TILED_YF;
2977 MISSING_CASE(fb_modifier);
2983 u32 skl_plane_ctl_rotation(unsigned int rotation)
2986 case BIT(DRM_ROTATE_0):
2989 * DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr
2990 * while i915 HW rotation is clockwise, thats why this swapping.
2992 case BIT(DRM_ROTATE_90):
2993 return PLANE_CTL_ROTATE_270;
2994 case BIT(DRM_ROTATE_180):
2995 return PLANE_CTL_ROTATE_180;
2996 case BIT(DRM_ROTATE_270):
2997 return PLANE_CTL_ROTATE_90;
2999 MISSING_CASE(rotation);
3005 static void skylake_update_primary_plane(struct drm_plane *plane,
3006 const struct intel_crtc_state *crtc_state,
3007 const struct intel_plane_state *plane_state)
3009 struct drm_device *dev = plane->dev;
3010 struct drm_i915_private *dev_priv = dev->dev_private;
3011 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
3012 struct drm_framebuffer *fb = plane_state->base.fb;
3013 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
3014 int pipe = intel_crtc->pipe;
3015 u32 plane_ctl, stride_div, stride;
3016 u32 tile_height, plane_offset, plane_size;
3017 unsigned int rotation = plane_state->base.rotation;
3018 int x_offset, y_offset;
3020 int scaler_id = plane_state->scaler_id;
3021 int src_x = plane_state->src.x1 >> 16;
3022 int src_y = plane_state->src.y1 >> 16;
3023 int src_w = drm_rect_width(&plane_state->src) >> 16;
3024 int src_h = drm_rect_height(&plane_state->src) >> 16;
3025 int dst_x = plane_state->dst.x1;
3026 int dst_y = plane_state->dst.y1;
3027 int dst_w = drm_rect_width(&plane_state->dst);
3028 int dst_h = drm_rect_height(&plane_state->dst);
3030 plane_ctl = PLANE_CTL_ENABLE |
3031 PLANE_CTL_PIPE_GAMMA_ENABLE |
3032 PLANE_CTL_PIPE_CSC_ENABLE;
3034 plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
3035 plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
3036 plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
3037 plane_ctl |= skl_plane_ctl_rotation(rotation);
3039 stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
3041 surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
3043 WARN_ON(drm_rect_width(&plane_state->src) == 0);
3045 if (intel_rotation_90_or_270(rotation)) {
3046 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
3048 /* stride = Surface height in tiles */
3049 tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
3050 stride = DIV_ROUND_UP(fb->height, tile_height);
3051 x_offset = stride * tile_height - src_y - src_h;
3053 plane_size = (src_w - 1) << 16 | (src_h - 1);
3055 stride = fb->pitches[0] / stride_div;
3058 plane_size = (src_h - 1) << 16 | (src_w - 1);
3060 plane_offset = y_offset << 16 | x_offset;
3062 intel_crtc->adjusted_x = x_offset;
3063 intel_crtc->adjusted_y = y_offset;
3065 I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
3066 I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
3067 I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
3068 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
3070 if (scaler_id >= 0) {
3071 uint32_t ps_ctrl = 0;
3073 WARN_ON(!dst_w || !dst_h);
3074 ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
3075 crtc_state->scaler_state.scalers[scaler_id].mode;
3076 I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
3077 I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
3078 I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
3079 I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
3080 I915_WRITE(PLANE_POS(pipe, 0), 0);
3082 I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
3085 I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
3087 POSTING_READ(PLANE_SURF(pipe, 0));
3090 static void skylake_disable_primary_plane(struct drm_plane *primary,
3091 struct drm_crtc *crtc)
3093 struct drm_device *dev = crtc->dev;
3094 struct drm_i915_private *dev_priv = dev->dev_private;
3095 int pipe = to_intel_crtc(crtc)->pipe;
3097 I915_WRITE(PLANE_CTL(pipe, 0), 0);
3098 I915_WRITE(PLANE_SURF(pipe, 0), 0);
3099 POSTING_READ(PLANE_SURF(pipe, 0));
3102 /* Assume fb object is pinned & idle & fenced and just update base pointers */
3104 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
3105 int x, int y, enum mode_set_atomic state)
3107 /* Support for kgdboc is disabled, this needs a major rework. */
3108 DRM_ERROR("legacy panic handler not supported any more.\n");
3113 static void intel_complete_page_flips(struct drm_device *dev)
3115 struct drm_crtc *crtc;
3117 for_each_crtc(dev, crtc) {
3118 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3119 enum plane plane = intel_crtc->plane;
3121 intel_prepare_page_flip(dev, plane);
3122 intel_finish_page_flip_plane(dev, plane);
3126 static void intel_update_primary_planes(struct drm_device *dev)
3128 struct drm_crtc *crtc;
3130 for_each_crtc(dev, crtc) {
3131 struct intel_plane *plane = to_intel_plane(crtc->primary);
3132 struct intel_plane_state *plane_state;
3134 drm_modeset_lock_crtc(crtc, &plane->base);
3135 plane_state = to_intel_plane_state(plane->base.state);
3137 if (plane_state->visible)
3138 plane->update_plane(&plane->base,
3139 to_intel_crtc_state(crtc->state),
3142 drm_modeset_unlock_crtc(crtc);
3146 void intel_prepare_reset(struct drm_device *dev)
3148 /* no reset support for gen2 */
3152 /* reset doesn't touch the display */
3153 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
3156 drm_modeset_lock_all(dev);
3158 * Disabling the crtcs gracefully seems nicer. Also the
3159 * g33 docs say we should at least disable all the planes.
3161 intel_display_suspend(dev);
3164 void intel_finish_reset(struct drm_device *dev)
3166 struct drm_i915_private *dev_priv = to_i915(dev);
3169 * Flips in the rings will be nuked by the reset,
3170 * so complete all pending flips so that user space
3171 * will get its events and not get stuck.
3173 intel_complete_page_flips(dev);
3175 /* no reset support for gen2 */
3179 /* reset doesn't touch the display */
3180 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) {
3182 * Flips in the rings have been nuked by the reset,
3183 * so update the base address of all primary
3184 * planes to the the last fb to make sure we're
3185 * showing the correct fb after a reset.
3187 * FIXME: Atomic will make this obsolete since we won't schedule
3188 * CS-based flips (which might get lost in gpu resets) any more.
3190 intel_update_primary_planes(dev);
3195 * The display has been reset as well,
3196 * so need a full re-initialization.
3198 intel_runtime_pm_disable_interrupts(dev_priv);
3199 intel_runtime_pm_enable_interrupts(dev_priv);
3201 intel_modeset_init_hw(dev);
3203 spin_lock_irq(&dev_priv->irq_lock);
3204 if (dev_priv->display.hpd_irq_setup)
3205 dev_priv->display.hpd_irq_setup(dev);
3206 spin_unlock_irq(&dev_priv->irq_lock);
3208 intel_display_resume(dev);
3210 intel_hpd_init(dev_priv);
3212 drm_modeset_unlock_all(dev);
3215 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
3217 struct drm_device *dev = crtc->dev;
3218 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3219 unsigned reset_counter;
3222 reset_counter = i915_reset_counter(&to_i915(dev)->gpu_error);
3223 if (intel_crtc->reset_counter != reset_counter)
3226 spin_lock_irq(&dev->event_lock);
3227 pending = to_intel_crtc(crtc)->unpin_work != NULL;
3228 spin_unlock_irq(&dev->event_lock);
3233 static void intel_update_pipe_config(struct intel_crtc *crtc,
3234 struct intel_crtc_state *old_crtc_state)
3236 struct drm_device *dev = crtc->base.dev;
3237 struct drm_i915_private *dev_priv = dev->dev_private;
3238 struct intel_crtc_state *pipe_config =
3239 to_intel_crtc_state(crtc->base.state);
3241 /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
3242 crtc->base.mode = crtc->base.state->mode;
3244 DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
3245 old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
3246 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
3249 * Update pipe size and adjust fitter if needed: the reason for this is
3250 * that in compute_mode_changes we check the native mode (not the pfit
3251 * mode) to see if we can flip rather than do a full mode set. In the
3252 * fastboot case, we'll flip, but if we don't update the pipesrc and
3253 * pfit state, we'll end up with a big fb scanned out into the wrong
3257 I915_WRITE(PIPESRC(crtc->pipe),
3258 ((pipe_config->pipe_src_w - 1) << 16) |
3259 (pipe_config->pipe_src_h - 1));
3261 /* on skylake this is done by detaching scalers */
3262 if (INTEL_INFO(dev)->gen >= 9) {
3263 skl_detach_scalers(crtc);
3265 if (pipe_config->pch_pfit.enabled)
3266 skylake_pfit_enable(crtc);
3267 } else if (HAS_PCH_SPLIT(dev)) {
3268 if (pipe_config->pch_pfit.enabled)
3269 ironlake_pfit_enable(crtc);
3270 else if (old_crtc_state->pch_pfit.enabled)
3271 ironlake_pfit_disable(crtc, true);
3275 static void intel_fdi_normal_train(struct drm_crtc *crtc)
3277 struct drm_device *dev = crtc->dev;
3278 struct drm_i915_private *dev_priv = dev->dev_private;
3279 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3280 int pipe = intel_crtc->pipe;
3284 /* enable normal train */
3285 reg = FDI_TX_CTL(pipe);
3286 temp = I915_READ(reg);
3287 if (IS_IVYBRIDGE(dev)) {
3288 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3289 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
3291 temp &= ~FDI_LINK_TRAIN_NONE;
3292 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
3294 I915_WRITE(reg, temp);
3296 reg = FDI_RX_CTL(pipe);
3297 temp = I915_READ(reg);
3298 if (HAS_PCH_CPT(dev)) {
3299 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3300 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
3302 temp &= ~FDI_LINK_TRAIN_NONE;
3303 temp |= FDI_LINK_TRAIN_NONE;
3305 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
3307 /* wait one idle pattern time */
3311 /* IVB wants error correction enabled */
3312 if (IS_IVYBRIDGE(dev))
3313 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
3314 FDI_FE_ERRC_ENABLE);
3317 /* The FDI link training functions for ILK/Ibexpeak. */
3318 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
3320 struct drm_device *dev = crtc->dev;
3321 struct drm_i915_private *dev_priv = dev->dev_private;
3322 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3323 int pipe = intel_crtc->pipe;
3327 /* FDI needs bits from pipe first */
3328 assert_pipe_enabled(dev_priv, pipe);
3330 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3332 reg = FDI_RX_IMR(pipe);
3333 temp = I915_READ(reg);
3334 temp &= ~FDI_RX_SYMBOL_LOCK;
3335 temp &= ~FDI_RX_BIT_LOCK;
3336 I915_WRITE(reg, temp);
3340 /* enable CPU FDI TX and PCH FDI RX */
3341 reg = FDI_TX_CTL(pipe);
3342 temp = I915_READ(reg);
3343 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3344 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3345 temp &= ~FDI_LINK_TRAIN_NONE;
3346 temp |= FDI_LINK_TRAIN_PATTERN_1;
3347 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3349 reg = FDI_RX_CTL(pipe);
3350 temp = I915_READ(reg);
3351 temp &= ~FDI_LINK_TRAIN_NONE;
3352 temp |= FDI_LINK_TRAIN_PATTERN_1;
3353 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3358 /* Ironlake workaround, enable clock pointer after FDI enable*/
3359 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3360 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
3361 FDI_RX_PHASE_SYNC_POINTER_EN);
3363 reg = FDI_RX_IIR(pipe);
3364 for (tries = 0; tries < 5; tries++) {
3365 temp = I915_READ(reg);
3366 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3368 if ((temp & FDI_RX_BIT_LOCK)) {
3369 DRM_DEBUG_KMS("FDI train 1 done.\n");
3370 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3375 DRM_ERROR("FDI train 1 fail!\n");
3378 reg = FDI_TX_CTL(pipe);
3379 temp = I915_READ(reg);
3380 temp &= ~FDI_LINK_TRAIN_NONE;
3381 temp |= FDI_LINK_TRAIN_PATTERN_2;
3382 I915_WRITE(reg, temp);
3384 reg = FDI_RX_CTL(pipe);
3385 temp = I915_READ(reg);
3386 temp &= ~FDI_LINK_TRAIN_NONE;
3387 temp |= FDI_LINK_TRAIN_PATTERN_2;
3388 I915_WRITE(reg, temp);
3393 reg = FDI_RX_IIR(pipe);
3394 for (tries = 0; tries < 5; tries++) {
3395 temp = I915_READ(reg);
3396 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3398 if (temp & FDI_RX_SYMBOL_LOCK) {
3399 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3400 DRM_DEBUG_KMS("FDI train 2 done.\n");
3405 DRM_ERROR("FDI train 2 fail!\n");
3407 DRM_DEBUG_KMS("FDI train done\n");
3411 static const int snb_b_fdi_train_param[] = {
3412 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
3413 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
3414 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
3415 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
3418 /* The FDI link training functions for SNB/Cougarpoint. */
3419 static void gen6_fdi_link_train(struct drm_crtc *crtc)
3421 struct drm_device *dev = crtc->dev;
3422 struct drm_i915_private *dev_priv = dev->dev_private;
3423 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3424 int pipe = intel_crtc->pipe;
3428 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3430 reg = FDI_RX_IMR(pipe);
3431 temp = I915_READ(reg);
3432 temp &= ~FDI_RX_SYMBOL_LOCK;
3433 temp &= ~FDI_RX_BIT_LOCK;
3434 I915_WRITE(reg, temp);
3439 /* enable CPU FDI TX and PCH FDI RX */
3440 reg = FDI_TX_CTL(pipe);
3441 temp = I915_READ(reg);
3442 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3443 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3444 temp &= ~FDI_LINK_TRAIN_NONE;
3445 temp |= FDI_LINK_TRAIN_PATTERN_1;
3446 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3448 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3449 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3451 I915_WRITE(FDI_RX_MISC(pipe),
3452 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3454 reg = FDI_RX_CTL(pipe);
3455 temp = I915_READ(reg);
3456 if (HAS_PCH_CPT(dev)) {
3457 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3458 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3460 temp &= ~FDI_LINK_TRAIN_NONE;
3461 temp |= FDI_LINK_TRAIN_PATTERN_1;
3463 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3468 for (i = 0; i < 4; i++) {
3469 reg = FDI_TX_CTL(pipe);
3470 temp = I915_READ(reg);
3471 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3472 temp |= snb_b_fdi_train_param[i];
3473 I915_WRITE(reg, temp);
3478 for (retry = 0; retry < 5; retry++) {
3479 reg = FDI_RX_IIR(pipe);
3480 temp = I915_READ(reg);
3481 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3482 if (temp & FDI_RX_BIT_LOCK) {
3483 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3484 DRM_DEBUG_KMS("FDI train 1 done.\n");
3493 DRM_ERROR("FDI train 1 fail!\n");
3496 reg = FDI_TX_CTL(pipe);
3497 temp = I915_READ(reg);
3498 temp &= ~FDI_LINK_TRAIN_NONE;
3499 temp |= FDI_LINK_TRAIN_PATTERN_2;
3501 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3503 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3505 I915_WRITE(reg, temp);
3507 reg = FDI_RX_CTL(pipe);
3508 temp = I915_READ(reg);
3509 if (HAS_PCH_CPT(dev)) {
3510 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3511 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3513 temp &= ~FDI_LINK_TRAIN_NONE;
3514 temp |= FDI_LINK_TRAIN_PATTERN_2;
3516 I915_WRITE(reg, temp);
3521 for (i = 0; i < 4; i++) {
3522 reg = FDI_TX_CTL(pipe);
3523 temp = I915_READ(reg);
3524 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3525 temp |= snb_b_fdi_train_param[i];
3526 I915_WRITE(reg, temp);
3531 for (retry = 0; retry < 5; retry++) {
3532 reg = FDI_RX_IIR(pipe);
3533 temp = I915_READ(reg);
3534 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3535 if (temp & FDI_RX_SYMBOL_LOCK) {
3536 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3537 DRM_DEBUG_KMS("FDI train 2 done.\n");
3546 DRM_ERROR("FDI train 2 fail!\n");
3548 DRM_DEBUG_KMS("FDI train done.\n");
3551 /* Manual link training for Ivy Bridge A0 parts */
3552 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
3554 struct drm_device *dev = crtc->dev;
3555 struct drm_i915_private *dev_priv = dev->dev_private;
3556 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3557 int pipe = intel_crtc->pipe;
3561 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3563 reg = FDI_RX_IMR(pipe);
3564 temp = I915_READ(reg);
3565 temp &= ~FDI_RX_SYMBOL_LOCK;
3566 temp &= ~FDI_RX_BIT_LOCK;
3567 I915_WRITE(reg, temp);
3572 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
3573 I915_READ(FDI_RX_IIR(pipe)));
3575 /* Try each vswing and preemphasis setting twice before moving on */
3576 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
3577 /* disable first in case we need to retry */
3578 reg = FDI_TX_CTL(pipe);
3579 temp = I915_READ(reg);
3580 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
3581 temp &= ~FDI_TX_ENABLE;
3582 I915_WRITE(reg, temp);
3584 reg = FDI_RX_CTL(pipe);
3585 temp = I915_READ(reg);
3586 temp &= ~FDI_LINK_TRAIN_AUTO;
3587 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3588 temp &= ~FDI_RX_ENABLE;
3589 I915_WRITE(reg, temp);
3591 /* enable CPU FDI TX and PCH FDI RX */
3592 reg = FDI_TX_CTL(pipe);
3593 temp = I915_READ(reg);
3594 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3595 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3596 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
3597 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3598 temp |= snb_b_fdi_train_param[j/2];
3599 temp |= FDI_COMPOSITE_SYNC;
3600 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3602 I915_WRITE(FDI_RX_MISC(pipe),
3603 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3605 reg = FDI_RX_CTL(pipe);
3606 temp = I915_READ(reg);
3607 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3608 temp |= FDI_COMPOSITE_SYNC;
3609 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3612 udelay(1); /* should be 0.5us */
3614 for (i = 0; i < 4; i++) {
3615 reg = FDI_RX_IIR(pipe);
3616 temp = I915_READ(reg);
3617 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3619 if (temp & FDI_RX_BIT_LOCK ||
3620 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
3621 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3622 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
3626 udelay(1); /* should be 0.5us */
3629 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
3634 reg = FDI_TX_CTL(pipe);
3635 temp = I915_READ(reg);
3636 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3637 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
3638 I915_WRITE(reg, temp);
3640 reg = FDI_RX_CTL(pipe);
3641 temp = I915_READ(reg);
3642 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3643 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3644 I915_WRITE(reg, temp);
3647 udelay(2); /* should be 1.5us */
3649 for (i = 0; i < 4; i++) {
3650 reg = FDI_RX_IIR(pipe);
3651 temp = I915_READ(reg);
3652 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3654 if (temp & FDI_RX_SYMBOL_LOCK ||
3655 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
3656 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3657 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
3661 udelay(2); /* should be 1.5us */
3664 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
3668 DRM_DEBUG_KMS("FDI train done.\n");
3671 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
3673 struct drm_device *dev = intel_crtc->base.dev;
3674 struct drm_i915_private *dev_priv = dev->dev_private;
3675 int pipe = intel_crtc->pipe;
3679 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
3680 reg = FDI_RX_CTL(pipe);
3681 temp = I915_READ(reg);
3682 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
3683 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3684 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3685 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
3690 /* Switch from Rawclk to PCDclk */
3691 temp = I915_READ(reg);
3692 I915_WRITE(reg, temp | FDI_PCDCLK);
3697 /* Enable CPU FDI TX PLL, always on for Ironlake */
3698 reg = FDI_TX_CTL(pipe);
3699 temp = I915_READ(reg);
3700 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
3701 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
3708 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
3710 struct drm_device *dev = intel_crtc->base.dev;
3711 struct drm_i915_private *dev_priv = dev->dev_private;
3712 int pipe = intel_crtc->pipe;
3716 /* Switch from PCDclk to Rawclk */
3717 reg = FDI_RX_CTL(pipe);
3718 temp = I915_READ(reg);
3719 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3721 /* Disable CPU FDI TX PLL */
3722 reg = FDI_TX_CTL(pipe);
3723 temp = I915_READ(reg);
3724 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3729 reg = FDI_RX_CTL(pipe);
3730 temp = I915_READ(reg);
3731 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3733 /* Wait for the clocks to turn off. */
3738 static void ironlake_fdi_disable(struct drm_crtc *crtc)
3740 struct drm_device *dev = crtc->dev;
3741 struct drm_i915_private *dev_priv = dev->dev_private;
3742 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3743 int pipe = intel_crtc->pipe;
3747 /* disable CPU FDI tx and PCH FDI rx */
3748 reg = FDI_TX_CTL(pipe);
3749 temp = I915_READ(reg);
3750 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
3753 reg = FDI_RX_CTL(pipe);
3754 temp = I915_READ(reg);
3755 temp &= ~(0x7 << 16);
3756 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3757 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
3762 /* Ironlake workaround, disable clock pointer after downing FDI */
3763 if (HAS_PCH_IBX(dev))
3764 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3766 /* still set train pattern 1 */
3767 reg = FDI_TX_CTL(pipe);
3768 temp = I915_READ(reg);
3769 temp &= ~FDI_LINK_TRAIN_NONE;
3770 temp |= FDI_LINK_TRAIN_PATTERN_1;
3771 I915_WRITE(reg, temp);
3773 reg = FDI_RX_CTL(pipe);
3774 temp = I915_READ(reg);
3775 if (HAS_PCH_CPT(dev)) {
3776 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3777 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3779 temp &= ~FDI_LINK_TRAIN_NONE;
3780 temp |= FDI_LINK_TRAIN_PATTERN_1;
3782 /* BPC in FDI rx is consistent with that in PIPECONF */
3783 temp &= ~(0x07 << 16);
3784 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3785 I915_WRITE(reg, temp);
3791 bool intel_has_pending_fb_unpin(struct drm_device *dev)
3793 struct intel_crtc *crtc;
3795 /* Note that we don't need to be called with mode_config.lock here
3796 * as our list of CRTC objects is static for the lifetime of the
3797 * device and so cannot disappear as we iterate. Similarly, we can
3798 * happily treat the predicates as racy, atomic checks as userspace
3799 * cannot claim and pin a new fb without at least acquring the
3800 * struct_mutex and so serialising with us.
3802 for_each_intel_crtc(dev, crtc) {
3803 if (atomic_read(&crtc->unpin_work_count) == 0)
3806 if (crtc->unpin_work)
3807 intel_wait_for_vblank(dev, crtc->pipe);
3815 static void page_flip_completed(struct intel_crtc *intel_crtc)
3817 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
3818 struct intel_unpin_work *work = intel_crtc->unpin_work;
3820 /* ensure that the unpin work is consistent wrt ->pending. */
3822 intel_crtc->unpin_work = NULL;
3825 drm_crtc_send_vblank_event(&intel_crtc->base, work->event);
3827 drm_crtc_vblank_put(&intel_crtc->base);
3829 wake_up_all(&dev_priv->pending_flip_queue);
3830 queue_work(dev_priv->wq, &work->work);
3832 trace_i915_flip_complete(intel_crtc->plane,
3833 work->pending_flip_obj);
3836 static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3838 struct drm_device *dev = crtc->dev;
3839 struct drm_i915_private *dev_priv = dev->dev_private;
3842 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3844 ret = wait_event_interruptible_timeout(
3845 dev_priv->pending_flip_queue,
3846 !intel_crtc_has_pending_flip(crtc),
3853 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3855 spin_lock_irq(&dev->event_lock);
3856 if (intel_crtc->unpin_work) {
3857 WARN_ONCE(1, "Removing stuck page flip\n");
3858 page_flip_completed(intel_crtc);
3860 spin_unlock_irq(&dev->event_lock);
3866 static void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
3870 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3872 mutex_lock(&dev_priv->sb_lock);
3874 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3875 temp |= SBI_SSCCTL_DISABLE;
3876 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3878 mutex_unlock(&dev_priv->sb_lock);
3881 /* Program iCLKIP clock to the desired frequency */
3882 static void lpt_program_iclkip(struct drm_crtc *crtc)
3884 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
3885 int clock = to_intel_crtc(crtc)->config->base.adjusted_mode.crtc_clock;
3886 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3889 lpt_disable_iclkip(dev_priv);
3891 /* The iCLK virtual clock root frequency is in MHz,
3892 * but the adjusted_mode->crtc_clock in in KHz. To get the
3893 * divisors, it is necessary to divide one by another, so we
3894 * convert the virtual clock precision to KHz here for higher
3897 for (auxdiv = 0; auxdiv < 2; auxdiv++) {
3898 u32 iclk_virtual_root_freq = 172800 * 1000;
3899 u32 iclk_pi_range = 64;
3900 u32 desired_divisor;
3902 desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
3904 divsel = (desired_divisor / iclk_pi_range) - 2;
3905 phaseinc = desired_divisor % iclk_pi_range;
3908 * Near 20MHz is a corner case which is
3909 * out of range for the 7-bit divisor
3915 /* This should not happen with any sane values */
3916 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3917 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3918 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3919 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3921 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3928 mutex_lock(&dev_priv->sb_lock);
3930 /* Program SSCDIVINTPHASE6 */
3931 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3932 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3933 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3934 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3935 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3936 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3937 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3938 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3940 /* Program SSCAUXDIV */
3941 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3942 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3943 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3944 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3946 /* Enable modulator and associated divider */
3947 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3948 temp &= ~SBI_SSCCTL_DISABLE;
3949 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3951 mutex_unlock(&dev_priv->sb_lock);
3953 /* Wait for initialization time */
3956 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3959 int lpt_get_iclkip(struct drm_i915_private *dev_priv)
3961 u32 divsel, phaseinc, auxdiv;
3962 u32 iclk_virtual_root_freq = 172800 * 1000;
3963 u32 iclk_pi_range = 64;
3964 u32 desired_divisor;
3967 if ((I915_READ(PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0)
3970 mutex_lock(&dev_priv->sb_lock);
3972 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3973 if (temp & SBI_SSCCTL_DISABLE) {
3974 mutex_unlock(&dev_priv->sb_lock);
3978 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3979 divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >>
3980 SBI_SSCDIVINTPHASE_DIVSEL_SHIFT;
3981 phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >>
3982 SBI_SSCDIVINTPHASE_INCVAL_SHIFT;
3984 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3985 auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >>
3986 SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT;
3988 mutex_unlock(&dev_priv->sb_lock);
3990 desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc;
3992 return DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
3993 desired_divisor << auxdiv);
3996 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
3997 enum pipe pch_transcoder)
3999 struct drm_device *dev = crtc->base.dev;
4000 struct drm_i915_private *dev_priv = dev->dev_private;
4001 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
4003 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
4004 I915_READ(HTOTAL(cpu_transcoder)));
4005 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
4006 I915_READ(HBLANK(cpu_transcoder)));
4007 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
4008 I915_READ(HSYNC(cpu_transcoder)));
4010 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
4011 I915_READ(VTOTAL(cpu_transcoder)));
4012 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
4013 I915_READ(VBLANK(cpu_transcoder)));
4014 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
4015 I915_READ(VSYNC(cpu_transcoder)));
4016 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
4017 I915_READ(VSYNCSHIFT(cpu_transcoder)));
4020 static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable)
4022 struct drm_i915_private *dev_priv = dev->dev_private;
4025 temp = I915_READ(SOUTH_CHICKEN1);
4026 if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
4029 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
4030 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
4032 temp &= ~FDI_BC_BIFURCATION_SELECT;
4034 temp |= FDI_BC_BIFURCATION_SELECT;
4036 DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
4037 I915_WRITE(SOUTH_CHICKEN1, temp);
4038 POSTING_READ(SOUTH_CHICKEN1);
4041 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
4043 struct drm_device *dev = intel_crtc->base.dev;
4045 switch (intel_crtc->pipe) {
4049 if (intel_crtc->config->fdi_lanes > 2)
4050 cpt_set_fdi_bc_bifurcation(dev, false);
4052 cpt_set_fdi_bc_bifurcation(dev, true);
4056 cpt_set_fdi_bc_bifurcation(dev, true);
4064 /* Return which DP Port should be selected for Transcoder DP control */
4066 intel_trans_dp_port_sel(struct drm_crtc *crtc)
4068 struct drm_device *dev = crtc->dev;
4069 struct intel_encoder *encoder;
4071 for_each_encoder_on_crtc(dev, crtc, encoder) {
4072 if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
4073 encoder->type == INTEL_OUTPUT_EDP)
4074 return enc_to_dig_port(&encoder->base)->port;
4081 * Enable PCH resources required for PCH ports:
4083 * - FDI training & RX/TX
4084 * - update transcoder timings
4085 * - DP transcoding bits
4088 static void ironlake_pch_enable(struct drm_crtc *crtc)
4090 struct drm_device *dev = crtc->dev;
4091 struct drm_i915_private *dev_priv = dev->dev_private;
4092 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4093 int pipe = intel_crtc->pipe;
4096 assert_pch_transcoder_disabled(dev_priv, pipe);
4098 if (IS_IVYBRIDGE(dev))
4099 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
4101 /* Write the TU size bits before fdi link training, so that error
4102 * detection works. */
4103 I915_WRITE(FDI_RX_TUSIZE1(pipe),
4104 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
4106 /* For PCH output, training FDI link */
4107 dev_priv->display.fdi_link_train(crtc);
4109 /* We need to program the right clock selection before writing the pixel
4110 * mutliplier into the DPLL. */
4111 if (HAS_PCH_CPT(dev)) {
4114 temp = I915_READ(PCH_DPLL_SEL);
4115 temp |= TRANS_DPLL_ENABLE(pipe);
4116 sel = TRANS_DPLLB_SEL(pipe);
4117 if (intel_crtc->config->shared_dpll ==
4118 intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
4122 I915_WRITE(PCH_DPLL_SEL, temp);
4125 /* XXX: pch pll's can be enabled any time before we enable the PCH
4126 * transcoder, and we actually should do this to not upset any PCH
4127 * transcoder that already use the clock when we share it.
4129 * Note that enable_shared_dpll tries to do the right thing, but
4130 * get_shared_dpll unconditionally resets the pll - we need that to have
4131 * the right LVDS enable sequence. */
4132 intel_enable_shared_dpll(intel_crtc);
4134 /* set transcoder timing, panel must allow it */
4135 assert_panel_unlocked(dev_priv, pipe);
4136 ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
4138 intel_fdi_normal_train(crtc);
4140 /* For PCH DP, enable TRANS_DP_CTL */
4141 if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
4142 const struct drm_display_mode *adjusted_mode =
4143 &intel_crtc->config->base.adjusted_mode;
4144 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
4145 i915_reg_t reg = TRANS_DP_CTL(pipe);
4146 temp = I915_READ(reg);
4147 temp &= ~(TRANS_DP_PORT_SEL_MASK |
4148 TRANS_DP_SYNC_MASK |
4150 temp |= TRANS_DP_OUTPUT_ENABLE;
4151 temp |= bpc << 9; /* same format but at 11:9 */
4153 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
4154 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
4155 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
4156 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
4158 switch (intel_trans_dp_port_sel(crtc)) {
4160 temp |= TRANS_DP_PORT_SEL_B;
4163 temp |= TRANS_DP_PORT_SEL_C;
4166 temp |= TRANS_DP_PORT_SEL_D;
4172 I915_WRITE(reg, temp);
4175 ironlake_enable_pch_transcoder(dev_priv, pipe);
4178 static void lpt_pch_enable(struct drm_crtc *crtc)
4180 struct drm_device *dev = crtc->dev;
4181 struct drm_i915_private *dev_priv = dev->dev_private;
4182 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4183 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
4185 assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
4187 lpt_program_iclkip(crtc);
4189 /* Set transcoder timing. */
4190 ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
4192 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
4195 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
4197 struct drm_i915_private *dev_priv = dev->dev_private;
4198 i915_reg_t dslreg = PIPEDSL(pipe);
4201 temp = I915_READ(dslreg);
4203 if (wait_for(I915_READ(dslreg) != temp, 5)) {
4204 if (wait_for(I915_READ(dslreg) != temp, 5))
4205 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
4210 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
4211 unsigned scaler_user, int *scaler_id, unsigned int rotation,
4212 int src_w, int src_h, int dst_w, int dst_h)
4214 struct intel_crtc_scaler_state *scaler_state =
4215 &crtc_state->scaler_state;
4216 struct intel_crtc *intel_crtc =
4217 to_intel_crtc(crtc_state->base.crtc);
4220 need_scaling = intel_rotation_90_or_270(rotation) ?
4221 (src_h != dst_w || src_w != dst_h):
4222 (src_w != dst_w || src_h != dst_h);
4225 * if plane is being disabled or scaler is no more required or force detach
4226 * - free scaler binded to this plane/crtc
4227 * - in order to do this, update crtc->scaler_usage
4229 * Here scaler state in crtc_state is set free so that
4230 * scaler can be assigned to other user. Actual register
4231 * update to free the scaler is done in plane/panel-fit programming.
4232 * For this purpose crtc/plane_state->scaler_id isn't reset here.
4234 if (force_detach || !need_scaling) {
4235 if (*scaler_id >= 0) {
4236 scaler_state->scaler_users &= ~(1 << scaler_user);
4237 scaler_state->scalers[*scaler_id].in_use = 0;
4239 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4240 "Staged freeing scaler id %d scaler_users = 0x%x\n",
4241 intel_crtc->pipe, scaler_user, *scaler_id,
4242 scaler_state->scaler_users);
4249 if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
4250 dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
4252 src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
4253 dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
4254 DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
4255 "size is out of scaler range\n",
4256 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
4260 /* mark this plane as a scaler user in crtc_state */
4261 scaler_state->scaler_users |= (1 << scaler_user);
4262 DRM_DEBUG_KMS("scaler_user index %u.%u: "
4263 "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
4264 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
4265 scaler_state->scaler_users);
4271 * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
4273 * @state: crtc's scaler state
4276 * 0 - scaler_usage updated successfully
4277 * error - requested scaling cannot be supported or other error condition
4279 int skl_update_scaler_crtc(struct intel_crtc_state *state)
4281 struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
4282 const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
4284 DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n",
4285 intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX);
4287 return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
4288 &state->scaler_state.scaler_id, BIT(DRM_ROTATE_0),
4289 state->pipe_src_w, state->pipe_src_h,
4290 adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
4294 * skl_update_scaler_plane - Stages update to scaler state for a given plane.
4296 * @state: crtc's scaler state
4297 * @plane_state: atomic plane state to update
4300 * 0 - scaler_usage updated successfully
4301 * error - requested scaling cannot be supported or other error condition
4303 static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
4304 struct intel_plane_state *plane_state)
4307 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
4308 struct intel_plane *intel_plane =
4309 to_intel_plane(plane_state->base.plane);
4310 struct drm_framebuffer *fb = plane_state->base.fb;
4313 bool force_detach = !fb || !plane_state->visible;
4315 DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n",
4316 intel_plane->base.base.id, intel_crtc->pipe,
4317 drm_plane_index(&intel_plane->base));
4319 ret = skl_update_scaler(crtc_state, force_detach,
4320 drm_plane_index(&intel_plane->base),
4321 &plane_state->scaler_id,
4322 plane_state->base.rotation,
4323 drm_rect_width(&plane_state->src) >> 16,
4324 drm_rect_height(&plane_state->src) >> 16,
4325 drm_rect_width(&plane_state->dst),
4326 drm_rect_height(&plane_state->dst));
4328 if (ret || plane_state->scaler_id < 0)
4331 /* check colorkey */
4332 if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
4333 DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed",
4334 intel_plane->base.base.id);
4338 /* Check src format */
4339 switch (fb->pixel_format) {
4340 case DRM_FORMAT_RGB565:
4341 case DRM_FORMAT_XBGR8888:
4342 case DRM_FORMAT_XRGB8888:
4343 case DRM_FORMAT_ABGR8888:
4344 case DRM_FORMAT_ARGB8888:
4345 case DRM_FORMAT_XRGB2101010:
4346 case DRM_FORMAT_XBGR2101010:
4347 case DRM_FORMAT_YUYV:
4348 case DRM_FORMAT_YVYU:
4349 case DRM_FORMAT_UYVY:
4350 case DRM_FORMAT_VYUY:
4353 DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n",
4354 intel_plane->base.base.id, fb->base.id, fb->pixel_format);
4361 static void skylake_scaler_disable(struct intel_crtc *crtc)
4365 for (i = 0; i < crtc->num_scalers; i++)
4366 skl_detach_scaler(crtc, i);
4369 static void skylake_pfit_enable(struct intel_crtc *crtc)
4371 struct drm_device *dev = crtc->base.dev;
4372 struct drm_i915_private *dev_priv = dev->dev_private;
4373 int pipe = crtc->pipe;
4374 struct intel_crtc_scaler_state *scaler_state =
4375 &crtc->config->scaler_state;
4377 DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
4379 if (crtc->config->pch_pfit.enabled) {
4382 if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
4383 DRM_ERROR("Requesting pfit without getting a scaler first\n");
4387 id = scaler_state->scaler_id;
4388 I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
4389 PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
4390 I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
4391 I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
4393 DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
4397 static void ironlake_pfit_enable(struct intel_crtc *crtc)
4399 struct drm_device *dev = crtc->base.dev;
4400 struct drm_i915_private *dev_priv = dev->dev_private;
4401 int pipe = crtc->pipe;
4403 if (crtc->config->pch_pfit.enabled) {
4404 /* Force use of hard-coded filter coefficients
4405 * as some pre-programmed values are broken,
4408 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
4409 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
4410 PF_PIPE_SEL_IVB(pipe));
4412 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
4413 I915_WRITE(PF_WIN_POS(pipe), crtc->config->pch_pfit.pos);
4414 I915_WRITE(PF_WIN_SZ(pipe), crtc->config->pch_pfit.size);
4418 void hsw_enable_ips(struct intel_crtc *crtc)
4420 struct drm_device *dev = crtc->base.dev;
4421 struct drm_i915_private *dev_priv = dev->dev_private;
4423 if (!crtc->config->ips_enabled)
4427 * We can only enable IPS after we enable a plane and wait for a vblank
4428 * This function is called from post_plane_update, which is run after
4432 assert_plane_enabled(dev_priv, crtc->plane);
4433 if (IS_BROADWELL(dev)) {
4434 mutex_lock(&dev_priv->rps.hw_lock);
4435 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
4436 mutex_unlock(&dev_priv->rps.hw_lock);
4437 /* Quoting Art Runyan: "its not safe to expect any particular
4438 * value in IPS_CTL bit 31 after enabling IPS through the
4439 * mailbox." Moreover, the mailbox may return a bogus state,
4440 * so we need to just enable it and continue on.
4443 I915_WRITE(IPS_CTL, IPS_ENABLE);
4444 /* The bit only becomes 1 in the next vblank, so this wait here
4445 * is essentially intel_wait_for_vblank. If we don't have this
4446 * and don't wait for vblanks until the end of crtc_enable, then
4447 * the HW state readout code will complain that the expected
4448 * IPS_CTL value is not the one we read. */
4449 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
4450 DRM_ERROR("Timed out waiting for IPS enable\n");
4454 void hsw_disable_ips(struct intel_crtc *crtc)
4456 struct drm_device *dev = crtc->base.dev;
4457 struct drm_i915_private *dev_priv = dev->dev_private;
4459 if (!crtc->config->ips_enabled)
4462 assert_plane_enabled(dev_priv, crtc->plane);
4463 if (IS_BROADWELL(dev)) {
4464 mutex_lock(&dev_priv->rps.hw_lock);
4465 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
4466 mutex_unlock(&dev_priv->rps.hw_lock);
4467 /* wait for pcode to finish disabling IPS, which may take up to 42ms */
4468 if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42))
4469 DRM_ERROR("Timed out waiting for IPS disable\n");
4471 I915_WRITE(IPS_CTL, 0);
4472 POSTING_READ(IPS_CTL);
4475 /* We need to wait for a vblank before we can disable the plane. */
4476 intel_wait_for_vblank(dev, crtc->pipe);
4479 static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
4481 if (intel_crtc->overlay) {
4482 struct drm_device *dev = intel_crtc->base.dev;
4483 struct drm_i915_private *dev_priv = dev->dev_private;
4485 mutex_lock(&dev->struct_mutex);
4486 dev_priv->mm.interruptible = false;
4487 (void) intel_overlay_switch_off(intel_crtc->overlay);
4488 dev_priv->mm.interruptible = true;
4489 mutex_unlock(&dev->struct_mutex);
4492 /* Let userspace switch the overlay on again. In most cases userspace
4493 * has to recompute where to put it anyway.
4498 * intel_post_enable_primary - Perform operations after enabling primary plane
4499 * @crtc: the CRTC whose primary plane was just enabled
4501 * Performs potentially sleeping operations that must be done after the primary
4502 * plane is enabled, such as updating FBC and IPS. Note that this may be
4503 * called due to an explicit primary plane update, or due to an implicit
4504 * re-enable that is caused when a sprite plane is updated to no longer
4505 * completely hide the primary plane.
4508 intel_post_enable_primary(struct drm_crtc *crtc)
4510 struct drm_device *dev = crtc->dev;
4511 struct drm_i915_private *dev_priv = dev->dev_private;
4512 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4513 int pipe = intel_crtc->pipe;
4516 * FIXME IPS should be fine as long as one plane is
4517 * enabled, but in practice it seems to have problems
4518 * when going from primary only to sprite only and vice
4521 hsw_enable_ips(intel_crtc);
4524 * Gen2 reports pipe underruns whenever all planes are disabled.
4525 * So don't enable underrun reporting before at least some planes
4527 * FIXME: Need to fix the logic to work when we turn off all planes
4528 * but leave the pipe running.
4531 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4533 /* Underruns don't always raise interrupts, so check manually. */
4534 intel_check_cpu_fifo_underruns(dev_priv);
4535 intel_check_pch_fifo_underruns(dev_priv);
4538 /* FIXME move all this to pre_plane_update() with proper state tracking */
4540 intel_pre_disable_primary(struct drm_crtc *crtc)
4542 struct drm_device *dev = crtc->dev;
4543 struct drm_i915_private *dev_priv = dev->dev_private;
4544 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4545 int pipe = intel_crtc->pipe;
4548 * Gen2 reports pipe underruns whenever all planes are disabled.
4549 * So diasble underrun reporting before all the planes get disabled.
4550 * FIXME: Need to fix the logic to work when we turn off all planes
4551 * but leave the pipe running.
4554 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4557 * FIXME IPS should be fine as long as one plane is
4558 * enabled, but in practice it seems to have problems
4559 * when going from primary only to sprite only and vice
4562 hsw_disable_ips(intel_crtc);
4565 /* FIXME get rid of this and use pre_plane_update */
4567 intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
4569 struct drm_device *dev = crtc->dev;
4570 struct drm_i915_private *dev_priv = dev->dev_private;
4571 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4572 int pipe = intel_crtc->pipe;
4574 intel_pre_disable_primary(crtc);
4577 * Vblank time updates from the shadow to live plane control register
4578 * are blocked if the memory self-refresh mode is active at that
4579 * moment. So to make sure the plane gets truly disabled, disable
4580 * first the self-refresh mode. The self-refresh enable bit in turn
4581 * will be checked/applied by the HW only at the next frame start
4582 * event which is after the vblank start event, so we need to have a
4583 * wait-for-vblank between disabling the plane and the pipe.
4585 if (HAS_GMCH_DISPLAY(dev)) {
4586 intel_set_memory_cxsr(dev_priv, false);
4587 dev_priv->wm.vlv.cxsr = false;
4588 intel_wait_for_vblank(dev, pipe);
4592 static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
4594 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4595 struct drm_atomic_state *old_state = old_crtc_state->base.state;
4596 struct intel_crtc_state *pipe_config =
4597 to_intel_crtc_state(crtc->base.state);
4598 struct drm_device *dev = crtc->base.dev;
4599 struct drm_plane *primary = crtc->base.primary;
4600 struct drm_plane_state *old_pri_state =
4601 drm_atomic_get_existing_plane_state(old_state, primary);
4603 intel_frontbuffer_flip(dev, pipe_config->fb_bits);
4605 crtc->wm.cxsr_allowed = true;
4607 if (pipe_config->update_wm_post && pipe_config->base.active)
4608 intel_update_watermarks(&crtc->base);
4610 if (old_pri_state) {
4611 struct intel_plane_state *primary_state =
4612 to_intel_plane_state(primary->state);
4613 struct intel_plane_state *old_primary_state =
4614 to_intel_plane_state(old_pri_state);
4616 intel_fbc_post_update(crtc);
4618 if (primary_state->visible &&
4619 (needs_modeset(&pipe_config->base) ||
4620 !old_primary_state->visible))
4621 intel_post_enable_primary(&crtc->base);
4625 static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state)
4627 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4628 struct drm_device *dev = crtc->base.dev;
4629 struct drm_i915_private *dev_priv = dev->dev_private;
4630 struct intel_crtc_state *pipe_config =
4631 to_intel_crtc_state(crtc->base.state);
4632 struct drm_atomic_state *old_state = old_crtc_state->base.state;
4633 struct drm_plane *primary = crtc->base.primary;
4634 struct drm_plane_state *old_pri_state =
4635 drm_atomic_get_existing_plane_state(old_state, primary);
4636 bool modeset = needs_modeset(&pipe_config->base);
4638 if (old_pri_state) {
4639 struct intel_plane_state *primary_state =
4640 to_intel_plane_state(primary->state);
4641 struct intel_plane_state *old_primary_state =
4642 to_intel_plane_state(old_pri_state);
4644 intel_fbc_pre_update(crtc);
4646 if (old_primary_state->visible &&
4647 (modeset || !primary_state->visible))
4648 intel_pre_disable_primary(&crtc->base);
4651 if (pipe_config->disable_cxsr) {
4652 crtc->wm.cxsr_allowed = false;
4655 * Vblank time updates from the shadow to live plane control register
4656 * are blocked if the memory self-refresh mode is active at that
4657 * moment. So to make sure the plane gets truly disabled, disable
4658 * first the self-refresh mode. The self-refresh enable bit in turn
4659 * will be checked/applied by the HW only at the next frame start
4660 * event which is after the vblank start event, so we need to have a
4661 * wait-for-vblank between disabling the plane and the pipe.
4663 if (old_crtc_state->base.active) {
4664 intel_set_memory_cxsr(dev_priv, false);
4665 dev_priv->wm.vlv.cxsr = false;
4666 intel_wait_for_vblank(dev, crtc->pipe);
4671 * IVB workaround: must disable low power watermarks for at least
4672 * one frame before enabling scaling. LP watermarks can be re-enabled
4673 * when scaling is disabled.
4675 * WaCxSRDisabledForSpriteScaling:ivb
4677 if (pipe_config->disable_lp_wm) {
4678 ilk_disable_lp_wm(dev);
4679 intel_wait_for_vblank(dev, crtc->pipe);
4683 * If we're doing a modeset, we're done. No need to do any pre-vblank
4684 * watermark programming here.
4686 if (needs_modeset(&pipe_config->base))
4690 * For platforms that support atomic watermarks, program the
4691 * 'intermediate' watermarks immediately. On pre-gen9 platforms, these
4692 * will be the intermediate values that are safe for both pre- and
4693 * post- vblank; when vblank happens, the 'active' values will be set
4694 * to the final 'target' values and we'll do this again to get the
4695 * optimal watermarks. For gen9+ platforms, the values we program here
4696 * will be the final target values which will get automatically latched
4697 * at vblank time; no further programming will be necessary.
4699 * If a platform hasn't been transitioned to atomic watermarks yet,
4700 * we'll continue to update watermarks the old way, if flags tell
4703 if (dev_priv->display.initial_watermarks != NULL)
4704 dev_priv->display.initial_watermarks(pipe_config);
4705 else if (pipe_config->update_wm_pre)
4706 intel_update_watermarks(&crtc->base);
4709 static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
4711 struct drm_device *dev = crtc->dev;
4712 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4713 struct drm_plane *p;
4714 int pipe = intel_crtc->pipe;
4716 intel_crtc_dpms_overlay_disable(intel_crtc);
4718 drm_for_each_plane_mask(p, dev, plane_mask)
4719 to_intel_plane(p)->disable_plane(p, crtc);
4722 * FIXME: Once we grow proper nuclear flip support out of this we need
4723 * to compute the mask of flip planes precisely. For the time being
4724 * consider this a flip to a NULL plane.
4726 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
4729 static void ironlake_crtc_enable(struct drm_crtc *crtc)
4731 struct drm_device *dev = crtc->dev;
4732 struct drm_i915_private *dev_priv = dev->dev_private;
4733 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4734 struct intel_encoder *encoder;
4735 int pipe = intel_crtc->pipe;
4736 struct intel_crtc_state *pipe_config =
4737 to_intel_crtc_state(crtc->state);
4739 if (WARN_ON(intel_crtc->active))
4743 * Sometimes spurious CPU pipe underruns happen during FDI
4744 * training, at least with VGA+HDMI cloning. Suppress them.
4746 * On ILK we get an occasional spurious CPU pipe underruns
4747 * between eDP port A enable and vdd enable. Also PCH port
4748 * enable seems to result in the occasional CPU pipe underrun.
4750 * Spurious PCH underruns also occur during PCH enabling.
4752 if (intel_crtc->config->has_pch_encoder || IS_GEN5(dev_priv))
4753 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4754 if (intel_crtc->config->has_pch_encoder)
4755 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
4757 if (intel_crtc->config->has_pch_encoder)
4758 intel_prepare_shared_dpll(intel_crtc);
4760 if (intel_crtc->config->has_dp_encoder)
4761 intel_dp_set_m_n(intel_crtc, M1_N1);
4763 intel_set_pipe_timings(intel_crtc);
4764 intel_set_pipe_src_size(intel_crtc);
4766 if (intel_crtc->config->has_pch_encoder) {
4767 intel_cpu_transcoder_set_m_n(intel_crtc,
4768 &intel_crtc->config->fdi_m_n, NULL);
4771 ironlake_set_pipeconf(crtc);
4773 intel_crtc->active = true;
4775 for_each_encoder_on_crtc(dev, crtc, encoder)
4776 if (encoder->pre_enable)
4777 encoder->pre_enable(encoder);
4779 if (intel_crtc->config->has_pch_encoder) {
4780 /* Note: FDI PLL enabling _must_ be done before we enable the
4781 * cpu pipes, hence this is separate from all the other fdi/pch
4783 ironlake_fdi_pll_enable(intel_crtc);
4785 assert_fdi_tx_disabled(dev_priv, pipe);
4786 assert_fdi_rx_disabled(dev_priv, pipe);
4789 ironlake_pfit_enable(intel_crtc);
4792 * On ILK+ LUT must be loaded before the pipe is running but with
4795 intel_color_load_luts(&pipe_config->base);
4797 if (dev_priv->display.initial_watermarks != NULL)
4798 dev_priv->display.initial_watermarks(intel_crtc->config);
4799 intel_enable_pipe(intel_crtc);
4801 if (intel_crtc->config->has_pch_encoder)
4802 ironlake_pch_enable(crtc);
4804 assert_vblank_disabled(crtc);
4805 drm_crtc_vblank_on(crtc);
4807 for_each_encoder_on_crtc(dev, crtc, encoder)
4808 encoder->enable(encoder);
4810 if (HAS_PCH_CPT(dev))
4811 cpt_verify_modeset(dev, intel_crtc->pipe);
4813 /* Must wait for vblank to avoid spurious PCH FIFO underruns */
4814 if (intel_crtc->config->has_pch_encoder)
4815 intel_wait_for_vblank(dev, pipe);
4816 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4817 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
4820 /* IPS only exists on ULT machines and is tied to pipe A. */
4821 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
4823 return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
4826 static void haswell_crtc_enable(struct drm_crtc *crtc)
4828 struct drm_device *dev = crtc->dev;
4829 struct drm_i915_private *dev_priv = dev->dev_private;
4830 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4831 struct intel_encoder *encoder;
4832 int pipe = intel_crtc->pipe, hsw_workaround_pipe;
4833 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
4834 struct intel_crtc_state *pipe_config =
4835 to_intel_crtc_state(crtc->state);
4837 if (WARN_ON(intel_crtc->active))
4840 if (intel_crtc->config->has_pch_encoder)
4841 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4844 if (intel_crtc->config->shared_dpll)
4845 intel_enable_shared_dpll(intel_crtc);
4847 if (intel_crtc->config->has_dp_encoder)
4848 intel_dp_set_m_n(intel_crtc, M1_N1);
4850 if (!intel_crtc->config->has_dsi_encoder)
4851 intel_set_pipe_timings(intel_crtc);
4853 intel_set_pipe_src_size(intel_crtc);
4855 if (cpu_transcoder != TRANSCODER_EDP &&
4856 !transcoder_is_dsi(cpu_transcoder)) {
4857 I915_WRITE(PIPE_MULT(cpu_transcoder),
4858 intel_crtc->config->pixel_multiplier - 1);
4861 if (intel_crtc->config->has_pch_encoder) {
4862 intel_cpu_transcoder_set_m_n(intel_crtc,
4863 &intel_crtc->config->fdi_m_n, NULL);
4866 if (!intel_crtc->config->has_dsi_encoder)
4867 haswell_set_pipeconf(crtc);
4869 haswell_set_pipemisc(crtc);
4871 intel_color_set_csc(&pipe_config->base);
4873 intel_crtc->active = true;
4875 if (intel_crtc->config->has_pch_encoder)
4876 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4878 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4880 for_each_encoder_on_crtc(dev, crtc, encoder) {
4881 if (encoder->pre_enable)
4882 encoder->pre_enable(encoder);
4885 if (intel_crtc->config->has_pch_encoder)
4886 dev_priv->display.fdi_link_train(crtc);
4888 if (!intel_crtc->config->has_dsi_encoder)
4889 intel_ddi_enable_pipe_clock(intel_crtc);
4891 if (INTEL_INFO(dev)->gen >= 9)
4892 skylake_pfit_enable(intel_crtc);
4894 ironlake_pfit_enable(intel_crtc);
4897 * On ILK+ LUT must be loaded before the pipe is running but with
4900 intel_color_load_luts(&pipe_config->base);
4902 intel_ddi_set_pipe_settings(crtc);
4903 if (!intel_crtc->config->has_dsi_encoder)
4904 intel_ddi_enable_transcoder_func(crtc);
4906 if (dev_priv->display.initial_watermarks != NULL)
4907 dev_priv->display.initial_watermarks(pipe_config);
4909 intel_update_watermarks(crtc);
4911 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
4912 if (!intel_crtc->config->has_dsi_encoder)
4913 intel_enable_pipe(intel_crtc);
4915 if (intel_crtc->config->has_pch_encoder)
4916 lpt_pch_enable(crtc);
4918 if (intel_crtc->config->dp_encoder_is_mst)
4919 intel_ddi_set_vc_payload_alloc(crtc, true);
4921 assert_vblank_disabled(crtc);
4922 drm_crtc_vblank_on(crtc);
4924 for_each_encoder_on_crtc(dev, crtc, encoder) {
4925 encoder->enable(encoder);
4926 intel_opregion_notify_encoder(encoder, true);
4929 if (intel_crtc->config->has_pch_encoder) {
4930 intel_wait_for_vblank(dev, pipe);
4931 intel_wait_for_vblank(dev, pipe);
4932 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4933 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4937 /* If we change the relative order between pipe/planes enabling, we need
4938 * to change the workaround. */
4939 hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
4940 if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
4941 intel_wait_for_vblank(dev, hsw_workaround_pipe);
4942 intel_wait_for_vblank(dev, hsw_workaround_pipe);
4946 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
4948 struct drm_device *dev = crtc->base.dev;
4949 struct drm_i915_private *dev_priv = dev->dev_private;
4950 int pipe = crtc->pipe;
4952 /* To avoid upsetting the power well on haswell only disable the pfit if
4953 * it's in use. The hw state code will make sure we get this right. */
4954 if (force || crtc->config->pch_pfit.enabled) {
4955 I915_WRITE(PF_CTL(pipe), 0);
4956 I915_WRITE(PF_WIN_POS(pipe), 0);
4957 I915_WRITE(PF_WIN_SZ(pipe), 0);
4961 static void ironlake_crtc_disable(struct drm_crtc *crtc)
4963 struct drm_device *dev = crtc->dev;
4964 struct drm_i915_private *dev_priv = dev->dev_private;
4965 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4966 struct intel_encoder *encoder;
4967 int pipe = intel_crtc->pipe;
4970 * Sometimes spurious CPU pipe underruns happen when the
4971 * pipe is already disabled, but FDI RX/TX is still enabled.
4972 * Happens at least with VGA+HDMI cloning. Suppress them.
4974 if (intel_crtc->config->has_pch_encoder) {
4975 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4976 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
4979 for_each_encoder_on_crtc(dev, crtc, encoder)
4980 encoder->disable(encoder);
4982 drm_crtc_vblank_off(crtc);
4983 assert_vblank_disabled(crtc);
4985 intel_disable_pipe(intel_crtc);
4987 ironlake_pfit_disable(intel_crtc, false);
4989 if (intel_crtc->config->has_pch_encoder)
4990 ironlake_fdi_disable(crtc);
4992 for_each_encoder_on_crtc(dev, crtc, encoder)
4993 if (encoder->post_disable)
4994 encoder->post_disable(encoder);
4996 if (intel_crtc->config->has_pch_encoder) {
4997 ironlake_disable_pch_transcoder(dev_priv, pipe);
4999 if (HAS_PCH_CPT(dev)) {
5003 /* disable TRANS_DP_CTL */
5004 reg = TRANS_DP_CTL(pipe);
5005 temp = I915_READ(reg);
5006 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
5007 TRANS_DP_PORT_SEL_MASK);
5008 temp |= TRANS_DP_PORT_SEL_NONE;
5009 I915_WRITE(reg, temp);
5011 /* disable DPLL_SEL */
5012 temp = I915_READ(PCH_DPLL_SEL);
5013 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
5014 I915_WRITE(PCH_DPLL_SEL, temp);
5017 ironlake_fdi_pll_disable(intel_crtc);
5020 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5021 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
5024 static void haswell_crtc_disable(struct drm_crtc *crtc)
5026 struct drm_device *dev = crtc->dev;
5027 struct drm_i915_private *dev_priv = dev->dev_private;
5028 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5029 struct intel_encoder *encoder;
5030 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
5032 if (intel_crtc->config->has_pch_encoder)
5033 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5036 for_each_encoder_on_crtc(dev, crtc, encoder) {
5037 intel_opregion_notify_encoder(encoder, false);
5038 encoder->disable(encoder);
5041 drm_crtc_vblank_off(crtc);
5042 assert_vblank_disabled(crtc);
5044 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
5045 if (!intel_crtc->config->has_dsi_encoder)
5046 intel_disable_pipe(intel_crtc);
5048 if (intel_crtc->config->dp_encoder_is_mst)
5049 intel_ddi_set_vc_payload_alloc(crtc, false);
5051 if (!intel_crtc->config->has_dsi_encoder)
5052 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
5054 if (INTEL_INFO(dev)->gen >= 9)
5055 skylake_scaler_disable(intel_crtc);
5057 ironlake_pfit_disable(intel_crtc, false);
5059 if (!intel_crtc->config->has_dsi_encoder)
5060 intel_ddi_disable_pipe_clock(intel_crtc);
5062 for_each_encoder_on_crtc(dev, crtc, encoder)
5063 if (encoder->post_disable)
5064 encoder->post_disable(encoder);
5066 if (intel_crtc->config->has_pch_encoder) {
5067 lpt_disable_pch_transcoder(dev_priv);
5068 lpt_disable_iclkip(dev_priv);
5069 intel_ddi_fdi_disable(crtc);
5071 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5076 static void i9xx_pfit_enable(struct intel_crtc *crtc)
5078 struct drm_device *dev = crtc->base.dev;
5079 struct drm_i915_private *dev_priv = dev->dev_private;
5080 struct intel_crtc_state *pipe_config = crtc->config;
5082 if (!pipe_config->gmch_pfit.control)
5086 * The panel fitter should only be adjusted whilst the pipe is disabled,
5087 * according to register description and PRM.
5089 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
5090 assert_pipe_disabled(dev_priv, crtc->pipe);
5092 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
5093 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
5095 /* Border color in case we don't scale up to the full screen. Black by
5096 * default, change to something else for debugging. */
5097 I915_WRITE(BCLRPAT(crtc->pipe), 0);
5100 static enum intel_display_power_domain port_to_power_domain(enum port port)
5104 return POWER_DOMAIN_PORT_DDI_A_LANES;
5106 return POWER_DOMAIN_PORT_DDI_B_LANES;
5108 return POWER_DOMAIN_PORT_DDI_C_LANES;
5110 return POWER_DOMAIN_PORT_DDI_D_LANES;
5112 return POWER_DOMAIN_PORT_DDI_E_LANES;
5115 return POWER_DOMAIN_PORT_OTHER;
5119 static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
5123 return POWER_DOMAIN_AUX_A;
5125 return POWER_DOMAIN_AUX_B;
5127 return POWER_DOMAIN_AUX_C;
5129 return POWER_DOMAIN_AUX_D;
5131 /* FIXME: Check VBT for actual wiring of PORT E */
5132 return POWER_DOMAIN_AUX_D;
5135 return POWER_DOMAIN_AUX_A;
5139 enum intel_display_power_domain
5140 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
5142 struct drm_device *dev = intel_encoder->base.dev;
5143 struct intel_digital_port *intel_dig_port;
5145 switch (intel_encoder->type) {
5146 case INTEL_OUTPUT_UNKNOWN:
5147 /* Only DDI platforms should ever use this output type */
5148 WARN_ON_ONCE(!HAS_DDI(dev));
5149 case INTEL_OUTPUT_DISPLAYPORT:
5150 case INTEL_OUTPUT_HDMI:
5151 case INTEL_OUTPUT_EDP:
5152 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5153 return port_to_power_domain(intel_dig_port->port);
5154 case INTEL_OUTPUT_DP_MST:
5155 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5156 return port_to_power_domain(intel_dig_port->port);
5157 case INTEL_OUTPUT_ANALOG:
5158 return POWER_DOMAIN_PORT_CRT;
5159 case INTEL_OUTPUT_DSI:
5160 return POWER_DOMAIN_PORT_DSI;
5162 return POWER_DOMAIN_PORT_OTHER;
5166 enum intel_display_power_domain
5167 intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
5169 struct drm_device *dev = intel_encoder->base.dev;
5170 struct intel_digital_port *intel_dig_port;
5172 switch (intel_encoder->type) {
5173 case INTEL_OUTPUT_UNKNOWN:
5174 case INTEL_OUTPUT_HDMI:
5176 * Only DDI platforms should ever use these output types.
5177 * We can get here after the HDMI detect code has already set
5178 * the type of the shared encoder. Since we can't be sure
5179 * what's the status of the given connectors, play safe and
5180 * run the DP detection too.
5182 WARN_ON_ONCE(!HAS_DDI(dev));
5183 case INTEL_OUTPUT_DISPLAYPORT:
5184 case INTEL_OUTPUT_EDP:
5185 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5186 return port_to_aux_power_domain(intel_dig_port->port);
5187 case INTEL_OUTPUT_DP_MST:
5188 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5189 return port_to_aux_power_domain(intel_dig_port->port);
5191 MISSING_CASE(intel_encoder->type);
5192 return POWER_DOMAIN_AUX_A;
5196 static unsigned long get_crtc_power_domains(struct drm_crtc *crtc,
5197 struct intel_crtc_state *crtc_state)
5199 struct drm_device *dev = crtc->dev;
5200 struct drm_encoder *encoder;
5201 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5202 enum pipe pipe = intel_crtc->pipe;
5204 enum transcoder transcoder = crtc_state->cpu_transcoder;
5206 if (!crtc_state->base.active)
5209 mask = BIT(POWER_DOMAIN_PIPE(pipe));
5210 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
5211 if (crtc_state->pch_pfit.enabled ||
5212 crtc_state->pch_pfit.force_thru)
5213 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
5215 drm_for_each_encoder_mask(encoder, dev, crtc_state->base.encoder_mask) {
5216 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
5218 mask |= BIT(intel_display_port_power_domain(intel_encoder));
5221 if (crtc_state->shared_dpll)
5222 mask |= BIT(POWER_DOMAIN_PLLS);
5227 static unsigned long
5228 modeset_get_crtc_power_domains(struct drm_crtc *crtc,
5229 struct intel_crtc_state *crtc_state)
5231 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5232 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5233 enum intel_display_power_domain domain;
5234 unsigned long domains, new_domains, old_domains;
5236 old_domains = intel_crtc->enabled_power_domains;
5237 intel_crtc->enabled_power_domains = new_domains =
5238 get_crtc_power_domains(crtc, crtc_state);
5240 domains = new_domains & ~old_domains;
5242 for_each_power_domain(domain, domains)
5243 intel_display_power_get(dev_priv, domain);
5245 return old_domains & ~new_domains;
5248 static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
5249 unsigned long domains)
5251 enum intel_display_power_domain domain;
5253 for_each_power_domain(domain, domains)
5254 intel_display_power_put(dev_priv, domain);
5257 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
5259 int max_cdclk_freq = dev_priv->max_cdclk_freq;
5261 if (INTEL_INFO(dev_priv)->gen >= 9 ||
5262 IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
5263 return max_cdclk_freq;
5264 else if (IS_CHERRYVIEW(dev_priv))
5265 return max_cdclk_freq*95/100;
5266 else if (INTEL_INFO(dev_priv)->gen < 4)
5267 return 2*max_cdclk_freq*90/100;
5269 return max_cdclk_freq*90/100;
5272 static void intel_update_max_cdclk(struct drm_device *dev)
5274 struct drm_i915_private *dev_priv = dev->dev_private;
5276 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
5277 u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
5279 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
5280 dev_priv->max_cdclk_freq = 675000;
5281 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
5282 dev_priv->max_cdclk_freq = 540000;
5283 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
5284 dev_priv->max_cdclk_freq = 450000;
5286 dev_priv->max_cdclk_freq = 337500;
5287 } else if (IS_BROXTON(dev)) {
5288 dev_priv->max_cdclk_freq = 624000;
5289 } else if (IS_BROADWELL(dev)) {
5291 * FIXME with extra cooling we can allow
5292 * 540 MHz for ULX and 675 Mhz for ULT.
5293 * How can we know if extra cooling is
5294 * available? PCI ID, VTB, something else?
5296 if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
5297 dev_priv->max_cdclk_freq = 450000;
5298 else if (IS_BDW_ULX(dev))
5299 dev_priv->max_cdclk_freq = 450000;
5300 else if (IS_BDW_ULT(dev))
5301 dev_priv->max_cdclk_freq = 540000;
5303 dev_priv->max_cdclk_freq = 675000;
5304 } else if (IS_CHERRYVIEW(dev)) {
5305 dev_priv->max_cdclk_freq = 320000;
5306 } else if (IS_VALLEYVIEW(dev)) {
5307 dev_priv->max_cdclk_freq = 400000;
5309 /* otherwise assume cdclk is fixed */
5310 dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
5313 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
5315 DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
5316 dev_priv->max_cdclk_freq);
5318 DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
5319 dev_priv->max_dotclk_freq);
5322 static void intel_update_cdclk(struct drm_device *dev)
5324 struct drm_i915_private *dev_priv = dev->dev_private;
5326 dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
5327 DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
5328 dev_priv->cdclk_freq);
5331 * Program the gmbus_freq based on the cdclk frequency.
5332 * BSpec erroneously claims we should aim for 4MHz, but
5333 * in fact 1MHz is the correct frequency.
5335 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
5337 * Program the gmbus_freq based on the cdclk frequency.
5338 * BSpec erroneously claims we should aim for 4MHz, but
5339 * in fact 1MHz is the correct frequency.
5341 I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
5344 if (dev_priv->max_cdclk_freq == 0)
5345 intel_update_max_cdclk(dev);
5348 static void broxton_set_cdclk(struct drm_i915_private *dev_priv, int frequency)
5352 uint32_t current_freq;
5355 /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
5356 switch (frequency) {
5358 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
5359 ratio = BXT_DE_PLL_RATIO(60);
5362 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
5363 ratio = BXT_DE_PLL_RATIO(60);
5366 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
5367 ratio = BXT_DE_PLL_RATIO(60);
5370 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5371 ratio = BXT_DE_PLL_RATIO(60);
5374 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5375 ratio = BXT_DE_PLL_RATIO(65);
5379 * Bypass frequency with DE PLL disabled. Init ratio, divider
5380 * to suppress GCC warning.
5386 DRM_ERROR("unsupported CDCLK freq %d", frequency);
5391 mutex_lock(&dev_priv->rps.hw_lock);
5392 /* Inform power controller of upcoming frequency change */
5393 ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5395 mutex_unlock(&dev_priv->rps.hw_lock);
5398 DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
5403 current_freq = I915_READ(CDCLK_CTL) & CDCLK_FREQ_DECIMAL_MASK;
5404 /* convert from .1 fixpoint MHz with -1MHz offset to kHz */
5405 current_freq = current_freq * 500 + 1000;
5408 * DE PLL has to be disabled when
5409 * - setting to 19.2MHz (bypass, PLL isn't used)
5410 * - before setting to 624MHz (PLL needs toggling)
5411 * - before setting to any frequency from 624MHz (PLL needs toggling)
5413 if (frequency == 19200 || frequency == 624000 ||
5414 current_freq == 624000) {
5415 I915_WRITE(BXT_DE_PLL_ENABLE, ~BXT_DE_PLL_PLL_ENABLE);
5417 if (wait_for(!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK),
5419 DRM_ERROR("timout waiting for DE PLL unlock\n");
5422 if (frequency != 19200) {
5425 val = I915_READ(BXT_DE_PLL_CTL);
5426 val &= ~BXT_DE_PLL_RATIO_MASK;
5428 I915_WRITE(BXT_DE_PLL_CTL, val);
5430 I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
5432 if (wait_for(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK, 1))
5433 DRM_ERROR("timeout waiting for DE PLL lock\n");
5435 val = I915_READ(CDCLK_CTL);
5436 val &= ~BXT_CDCLK_CD2X_DIV_SEL_MASK;
5439 * Disable SSA Precharge when CD clock frequency < 500 MHz,
5442 val &= ~BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5443 if (frequency >= 500000)
5444 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5446 val &= ~CDCLK_FREQ_DECIMAL_MASK;
5447 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
5448 val |= (frequency - 1000) / 500;
5449 I915_WRITE(CDCLK_CTL, val);
5452 mutex_lock(&dev_priv->rps.hw_lock);
5453 ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5454 DIV_ROUND_UP(frequency, 25000));
5455 mutex_unlock(&dev_priv->rps.hw_lock);
5458 DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
5463 intel_update_cdclk(dev_priv->dev);
5466 static bool broxton_cdclk_is_enabled(struct drm_i915_private *dev_priv)
5468 if (!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE))
5471 /* TODO: Check for a valid CDCLK rate */
5473 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_REQUEST)) {
5474 DRM_DEBUG_DRIVER("CDCLK enabled, but DBUF power not requested\n");
5479 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE)) {
5480 DRM_DEBUG_DRIVER("CDCLK enabled, but DBUF power hasn't settled\n");
5488 bool broxton_cdclk_verify_state(struct drm_i915_private *dev_priv)
5490 return broxton_cdclk_is_enabled(dev_priv);
5493 void broxton_init_cdclk(struct drm_i915_private *dev_priv)
5495 /* check if cd clock is enabled */
5496 if (broxton_cdclk_is_enabled(dev_priv)) {
5497 DRM_DEBUG_KMS("CDCLK already enabled, won't reprogram it\n");
5501 DRM_DEBUG_KMS("CDCLK not enabled, enabling it\n");
5505 * - The initial CDCLK needs to be read from VBT.
5506 * Need to make this change after VBT has changes for BXT.
5507 * - check if setting the max (or any) cdclk freq is really necessary
5508 * here, it belongs to modeset time
5510 broxton_set_cdclk(dev_priv, 624000);
5512 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
5513 POSTING_READ(DBUF_CTL);
5517 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
5518 DRM_ERROR("DBuf power enable timeout!\n");
5521 void broxton_uninit_cdclk(struct drm_i915_private *dev_priv)
5523 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
5524 POSTING_READ(DBUF_CTL);
5528 if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
5529 DRM_ERROR("DBuf power disable timeout!\n");
5531 /* Set minimum (bypass) frequency, in effect turning off the DE PLL */
5532 broxton_set_cdclk(dev_priv, 19200);
5535 static const struct skl_cdclk_entry {
5538 } skl_cdclk_frequencies[] = {
5539 { .freq = 308570, .vco = 8640 },
5540 { .freq = 337500, .vco = 8100 },
5541 { .freq = 432000, .vco = 8640 },
5542 { .freq = 450000, .vco = 8100 },
5543 { .freq = 540000, .vco = 8100 },
5544 { .freq = 617140, .vco = 8640 },
5545 { .freq = 675000, .vco = 8100 },
5548 static unsigned int skl_cdclk_decimal(unsigned int freq)
5550 return (freq - 1000) / 500;
5553 static unsigned int skl_cdclk_get_vco(unsigned int freq)
5557 for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
5558 const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
5560 if (e->freq == freq)
5568 skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
5570 unsigned int min_freq;
5573 /* select the minimum CDCLK before enabling DPLL 0 */
5574 val = I915_READ(CDCLK_CTL);
5575 val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
5576 val |= CDCLK_FREQ_337_308;
5578 if (required_vco == 8640)
5583 val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
5585 I915_WRITE(CDCLK_CTL, val);
5586 POSTING_READ(CDCLK_CTL);
5589 * We always enable DPLL0 with the lowest link rate possible, but still
5590 * taking into account the VCO required to operate the eDP panel at the
5591 * desired frequency. The usual DP link rates operate with a VCO of
5592 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
5593 * The modeset code is responsible for the selection of the exact link
5594 * rate later on, with the constraint of choosing a frequency that
5595 * works with required_vco.
5597 val = I915_READ(DPLL_CTRL1);
5599 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
5600 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
5601 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
5602 if (required_vco == 8640)
5603 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
5606 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
5609 I915_WRITE(DPLL_CTRL1, val);
5610 POSTING_READ(DPLL_CTRL1);
5612 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
5614 if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
5615 DRM_ERROR("DPLL0 not locked\n");
5618 static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
5623 /* inform PCU we want to change CDCLK */
5624 val = SKL_CDCLK_PREPARE_FOR_CHANGE;
5625 mutex_lock(&dev_priv->rps.hw_lock);
5626 ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
5627 mutex_unlock(&dev_priv->rps.hw_lock);
5629 return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
5632 static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
5636 for (i = 0; i < 15; i++) {
5637 if (skl_cdclk_pcu_ready(dev_priv))
5645 static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
5647 struct drm_device *dev = dev_priv->dev;
5648 u32 freq_select, pcu_ack;
5650 DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
5652 if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
5653 DRM_ERROR("failed to inform PCU about cdclk change\n");
5661 freq_select = CDCLK_FREQ_450_432;
5665 freq_select = CDCLK_FREQ_540;
5671 freq_select = CDCLK_FREQ_337_308;
5676 freq_select = CDCLK_FREQ_675_617;
5681 I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
5682 POSTING_READ(CDCLK_CTL);
5684 /* inform PCU of the change */
5685 mutex_lock(&dev_priv->rps.hw_lock);
5686 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
5687 mutex_unlock(&dev_priv->rps.hw_lock);
5689 intel_update_cdclk(dev);
5692 void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
5694 /* disable DBUF power */
5695 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
5696 POSTING_READ(DBUF_CTL);
5700 if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
5701 DRM_ERROR("DBuf power disable timeout\n");
5704 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
5705 if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
5706 DRM_ERROR("Couldn't disable DPLL0\n");
5709 void skl_init_cdclk(struct drm_i915_private *dev_priv)
5711 unsigned int required_vco;
5713 /* DPLL0 not enabled (happens on early BIOS versions) */
5714 if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
5716 required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
5717 skl_dpll0_enable(dev_priv, required_vco);
5720 /* set CDCLK to the frequency the BIOS chose */
5721 skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
5723 /* enable DBUF power */
5724 I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
5725 POSTING_READ(DBUF_CTL);
5729 if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
5730 DRM_ERROR("DBuf power enable timeout\n");
5733 int skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
5735 uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
5736 uint32_t cdctl = I915_READ(CDCLK_CTL);
5737 int freq = dev_priv->skl_boot_cdclk;
5740 * check if the pre-os intialized the display
5741 * There is SWF18 scratchpad register defined which is set by the
5742 * pre-os which can be used by the OS drivers to check the status
5744 if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
5747 /* Is PLL enabled and locked ? */
5748 if (!((lcpll1 & LCPLL_PLL_ENABLE) && (lcpll1 & LCPLL_PLL_LOCK)))
5751 /* DPLL okay; verify the cdclock
5753 * Noticed in some instances that the freq selection is correct but
5754 * decimal part is programmed wrong from BIOS where pre-os does not
5755 * enable display. Verify the same as well.
5757 if (cdctl == ((cdctl & CDCLK_FREQ_SEL_MASK) | skl_cdclk_decimal(freq)))
5758 /* All well; nothing to sanitize */
5762 * As of now initialize with max cdclk till
5763 * we get dynamic cdclk support
5765 dev_priv->skl_boot_cdclk = dev_priv->max_cdclk_freq;
5766 skl_init_cdclk(dev_priv);
5768 /* we did have to sanitize */
5772 /* Adjust CDclk dividers to allow high res or save power if possible */
5773 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
5775 struct drm_i915_private *dev_priv = dev->dev_private;
5778 WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5779 != dev_priv->cdclk_freq);
5781 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
5783 else if (cdclk == 266667)
5788 mutex_lock(&dev_priv->rps.hw_lock);
5789 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5790 val &= ~DSPFREQGUAR_MASK;
5791 val |= (cmd << DSPFREQGUAR_SHIFT);
5792 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5793 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5794 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
5796 DRM_ERROR("timed out waiting for CDclk change\n");
5798 mutex_unlock(&dev_priv->rps.hw_lock);
5800 mutex_lock(&dev_priv->sb_lock);
5802 if (cdclk == 400000) {
5805 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5807 /* adjust cdclk divider */
5808 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
5809 val &= ~CCK_FREQUENCY_VALUES;
5811 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
5813 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
5814 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
5816 DRM_ERROR("timed out waiting for CDclk change\n");
5819 /* adjust self-refresh exit latency value */
5820 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
5824 * For high bandwidth configs, we set a higher latency in the bunit
5825 * so that the core display fetch happens in time to avoid underruns.
5827 if (cdclk == 400000)
5828 val |= 4500 / 250; /* 4.5 usec */
5830 val |= 3000 / 250; /* 3.0 usec */
5831 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
5833 mutex_unlock(&dev_priv->sb_lock);
5835 intel_update_cdclk(dev);
5838 static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
5840 struct drm_i915_private *dev_priv = dev->dev_private;
5843 WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5844 != dev_priv->cdclk_freq);
5853 MISSING_CASE(cdclk);
5858 * Specs are full of misinformation, but testing on actual
5859 * hardware has shown that we just need to write the desired
5860 * CCK divider into the Punit register.
5862 cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5864 mutex_lock(&dev_priv->rps.hw_lock);
5865 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5866 val &= ~DSPFREQGUAR_MASK_CHV;
5867 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
5868 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5869 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5870 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
5872 DRM_ERROR("timed out waiting for CDclk change\n");
5874 mutex_unlock(&dev_priv->rps.hw_lock);
5876 intel_update_cdclk(dev);
5879 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
5882 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
5883 int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
5886 * Really only a few cases to deal with, as only 4 CDclks are supported:
5889 * 320/333MHz (depends on HPLL freq)
5891 * So we check to see whether we're above 90% (VLV) or 95% (CHV)
5892 * of the lower bin and adjust if needed.
5894 * We seem to get an unstable or solid color picture at 200MHz.
5895 * Not sure what's wrong. For now use 200MHz only when all pipes
5898 if (!IS_CHERRYVIEW(dev_priv) &&
5899 max_pixclk > freq_320*limit/100)
5901 else if (max_pixclk > 266667*limit/100)
5903 else if (max_pixclk > 0)
5909 static int broxton_calc_cdclk(struct drm_i915_private *dev_priv,
5914 * - remove the guardband, it's not needed on BXT
5915 * - set 19.2MHz bypass frequency if there are no active pipes
5917 if (max_pixclk > 576000*9/10)
5919 else if (max_pixclk > 384000*9/10)
5921 else if (max_pixclk > 288000*9/10)
5923 else if (max_pixclk > 144000*9/10)
5929 /* Compute the max pixel clock for new configuration. */
5930 static int intel_mode_max_pixclk(struct drm_device *dev,
5931 struct drm_atomic_state *state)
5933 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
5934 struct drm_i915_private *dev_priv = dev->dev_private;
5935 struct drm_crtc *crtc;
5936 struct drm_crtc_state *crtc_state;
5937 unsigned max_pixclk = 0, i;
5940 memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
5941 sizeof(intel_state->min_pixclk));
5943 for_each_crtc_in_state(state, crtc, crtc_state, i) {
5946 if (crtc_state->enable)
5947 pixclk = crtc_state->adjusted_mode.crtc_clock;
5949 intel_state->min_pixclk[i] = pixclk;
5952 for_each_pipe(dev_priv, pipe)
5953 max_pixclk = max(intel_state->min_pixclk[pipe], max_pixclk);
5958 static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
5960 struct drm_device *dev = state->dev;
5961 struct drm_i915_private *dev_priv = dev->dev_private;
5962 int max_pixclk = intel_mode_max_pixclk(dev, state);
5963 struct intel_atomic_state *intel_state =
5964 to_intel_atomic_state(state);
5969 intel_state->cdclk = intel_state->dev_cdclk =
5970 valleyview_calc_cdclk(dev_priv, max_pixclk);
5972 if (!intel_state->active_crtcs)
5973 intel_state->dev_cdclk = valleyview_calc_cdclk(dev_priv, 0);
5978 static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state)
5980 struct drm_device *dev = state->dev;
5981 struct drm_i915_private *dev_priv = dev->dev_private;
5982 int max_pixclk = intel_mode_max_pixclk(dev, state);
5983 struct intel_atomic_state *intel_state =
5984 to_intel_atomic_state(state);
5989 intel_state->cdclk = intel_state->dev_cdclk =
5990 broxton_calc_cdclk(dev_priv, max_pixclk);
5992 if (!intel_state->active_crtcs)
5993 intel_state->dev_cdclk = broxton_calc_cdclk(dev_priv, 0);
5998 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
6000 unsigned int credits, default_credits;
6002 if (IS_CHERRYVIEW(dev_priv))
6003 default_credits = PFI_CREDIT(12);
6005 default_credits = PFI_CREDIT(8);
6007 if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) {
6008 /* CHV suggested value is 31 or 63 */
6009 if (IS_CHERRYVIEW(dev_priv))
6010 credits = PFI_CREDIT_63;
6012 credits = PFI_CREDIT(15);
6014 credits = default_credits;
6018 * WA - write default credits before re-programming
6019 * FIXME: should we also set the resend bit here?
6021 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6024 I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6025 credits | PFI_CREDIT_RESEND);
6028 * FIXME is this guaranteed to clear
6029 * immediately or should we poll for it?
6031 WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
6034 static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
6036 struct drm_device *dev = old_state->dev;
6037 struct drm_i915_private *dev_priv = dev->dev_private;
6038 struct intel_atomic_state *old_intel_state =
6039 to_intel_atomic_state(old_state);
6040 unsigned req_cdclk = old_intel_state->dev_cdclk;
6043 * FIXME: We can end up here with all power domains off, yet
6044 * with a CDCLK frequency other than the minimum. To account
6045 * for this take the PIPE-A power domain, which covers the HW
6046 * blocks needed for the following programming. This can be
6047 * removed once it's guaranteed that we get here either with
6048 * the minimum CDCLK set, or the required power domains
6051 intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
6053 if (IS_CHERRYVIEW(dev))
6054 cherryview_set_cdclk(dev, req_cdclk);
6056 valleyview_set_cdclk(dev, req_cdclk);
6058 vlv_program_pfi_credits(dev_priv);
6060 intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
6063 static void valleyview_crtc_enable(struct drm_crtc *crtc)
6065 struct drm_device *dev = crtc->dev;
6066 struct drm_i915_private *dev_priv = to_i915(dev);
6067 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6068 struct intel_encoder *encoder;
6069 struct intel_crtc_state *pipe_config =
6070 to_intel_crtc_state(crtc->state);
6071 int pipe = intel_crtc->pipe;
6073 if (WARN_ON(intel_crtc->active))
6076 if (intel_crtc->config->has_dp_encoder)
6077 intel_dp_set_m_n(intel_crtc, M1_N1);
6079 intel_set_pipe_timings(intel_crtc);
6080 intel_set_pipe_src_size(intel_crtc);
6082 if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) {
6083 struct drm_i915_private *dev_priv = dev->dev_private;
6085 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
6086 I915_WRITE(CHV_CANVAS(pipe), 0);
6089 i9xx_set_pipeconf(intel_crtc);
6091 intel_crtc->active = true;
6093 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6095 for_each_encoder_on_crtc(dev, crtc, encoder)
6096 if (encoder->pre_pll_enable)
6097 encoder->pre_pll_enable(encoder);
6099 if (IS_CHERRYVIEW(dev)) {
6100 chv_prepare_pll(intel_crtc, intel_crtc->config);
6101 chv_enable_pll(intel_crtc, intel_crtc->config);
6103 vlv_prepare_pll(intel_crtc, intel_crtc->config);
6104 vlv_enable_pll(intel_crtc, intel_crtc->config);
6107 for_each_encoder_on_crtc(dev, crtc, encoder)
6108 if (encoder->pre_enable)
6109 encoder->pre_enable(encoder);
6111 i9xx_pfit_enable(intel_crtc);
6113 intel_color_load_luts(&pipe_config->base);
6115 intel_update_watermarks(crtc);
6116 intel_enable_pipe(intel_crtc);
6118 assert_vblank_disabled(crtc);
6119 drm_crtc_vblank_on(crtc);
6121 for_each_encoder_on_crtc(dev, crtc, encoder)
6122 encoder->enable(encoder);
6125 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
6127 struct drm_device *dev = crtc->base.dev;
6128 struct drm_i915_private *dev_priv = dev->dev_private;
6130 I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
6131 I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
6134 static void i9xx_crtc_enable(struct drm_crtc *crtc)
6136 struct drm_device *dev = crtc->dev;
6137 struct drm_i915_private *dev_priv = to_i915(dev);
6138 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6139 struct intel_encoder *encoder;
6140 struct intel_crtc_state *pipe_config =
6141 to_intel_crtc_state(crtc->state);
6142 enum pipe pipe = intel_crtc->pipe;
6144 if (WARN_ON(intel_crtc->active))
6147 i9xx_set_pll_dividers(intel_crtc);
6149 if (intel_crtc->config->has_dp_encoder)
6150 intel_dp_set_m_n(intel_crtc, M1_N1);
6152 intel_set_pipe_timings(intel_crtc);
6153 intel_set_pipe_src_size(intel_crtc);
6155 i9xx_set_pipeconf(intel_crtc);
6157 intel_crtc->active = true;
6160 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6162 for_each_encoder_on_crtc(dev, crtc, encoder)
6163 if (encoder->pre_enable)
6164 encoder->pre_enable(encoder);
6166 i9xx_enable_pll(intel_crtc);
6168 i9xx_pfit_enable(intel_crtc);
6170 intel_color_load_luts(&pipe_config->base);
6172 intel_update_watermarks(crtc);
6173 intel_enable_pipe(intel_crtc);
6175 assert_vblank_disabled(crtc);
6176 drm_crtc_vblank_on(crtc);
6178 for_each_encoder_on_crtc(dev, crtc, encoder)
6179 encoder->enable(encoder);
6182 static void i9xx_pfit_disable(struct intel_crtc *crtc)
6184 struct drm_device *dev = crtc->base.dev;
6185 struct drm_i915_private *dev_priv = dev->dev_private;
6187 if (!crtc->config->gmch_pfit.control)
6190 assert_pipe_disabled(dev_priv, crtc->pipe);
6192 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
6193 I915_READ(PFIT_CONTROL));
6194 I915_WRITE(PFIT_CONTROL, 0);
6197 static void i9xx_crtc_disable(struct drm_crtc *crtc)
6199 struct drm_device *dev = crtc->dev;
6200 struct drm_i915_private *dev_priv = dev->dev_private;
6201 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6202 struct intel_encoder *encoder;
6203 int pipe = intel_crtc->pipe;
6206 * On gen2 planes are double buffered but the pipe isn't, so we must
6207 * wait for planes to fully turn off before disabling the pipe.
6210 intel_wait_for_vblank(dev, pipe);
6212 for_each_encoder_on_crtc(dev, crtc, encoder)
6213 encoder->disable(encoder);
6215 drm_crtc_vblank_off(crtc);
6216 assert_vblank_disabled(crtc);
6218 intel_disable_pipe(intel_crtc);
6220 i9xx_pfit_disable(intel_crtc);
6222 for_each_encoder_on_crtc(dev, crtc, encoder)
6223 if (encoder->post_disable)
6224 encoder->post_disable(encoder);
6226 if (!intel_crtc->config->has_dsi_encoder) {
6227 if (IS_CHERRYVIEW(dev))
6228 chv_disable_pll(dev_priv, pipe);
6229 else if (IS_VALLEYVIEW(dev))
6230 vlv_disable_pll(dev_priv, pipe);
6232 i9xx_disable_pll(intel_crtc);
6235 for_each_encoder_on_crtc(dev, crtc, encoder)
6236 if (encoder->post_pll_disable)
6237 encoder->post_pll_disable(encoder);
6240 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
6243 static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
6245 struct intel_encoder *encoder;
6246 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6247 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
6248 enum intel_display_power_domain domain;
6249 unsigned long domains;
6251 if (!intel_crtc->active)
6254 if (to_intel_plane_state(crtc->primary->state)->visible) {
6255 WARN_ON(intel_crtc->unpin_work);
6257 intel_pre_disable_primary_noatomic(crtc);
6259 intel_crtc_disable_planes(crtc, 1 << drm_plane_index(crtc->primary));
6260 to_intel_plane_state(crtc->primary->state)->visible = false;
6263 dev_priv->display.crtc_disable(crtc);
6265 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was enabled, now disabled\n",
6268 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->state, NULL) < 0);
6269 crtc->state->active = false;
6270 intel_crtc->active = false;
6271 crtc->enabled = false;
6272 crtc->state->connector_mask = 0;
6273 crtc->state->encoder_mask = 0;
6275 for_each_encoder_on_crtc(crtc->dev, crtc, encoder)
6276 encoder->base.crtc = NULL;
6278 intel_fbc_disable(intel_crtc);
6279 intel_update_watermarks(crtc);
6280 intel_disable_shared_dpll(intel_crtc);
6282 domains = intel_crtc->enabled_power_domains;
6283 for_each_power_domain(domain, domains)
6284 intel_display_power_put(dev_priv, domain);
6285 intel_crtc->enabled_power_domains = 0;
6287 dev_priv->active_crtcs &= ~(1 << intel_crtc->pipe);
6288 dev_priv->min_pixclk[intel_crtc->pipe] = 0;
6292 * turn all crtc's off, but do not adjust state
6293 * This has to be paired with a call to intel_modeset_setup_hw_state.
6295 int intel_display_suspend(struct drm_device *dev)
6297 struct drm_i915_private *dev_priv = to_i915(dev);
6298 struct drm_atomic_state *state;
6301 state = drm_atomic_helper_suspend(dev);
6302 ret = PTR_ERR_OR_ZERO(state);
6304 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
6306 dev_priv->modeset_restore_state = state;
6310 void intel_encoder_destroy(struct drm_encoder *encoder)
6312 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
6314 drm_encoder_cleanup(encoder);
6315 kfree(intel_encoder);
6318 /* Cross check the actual hw state with our own modeset state tracking (and it's
6319 * internal consistency). */
6320 static void intel_connector_verify_state(struct intel_connector *connector)
6322 struct drm_crtc *crtc = connector->base.state->crtc;
6324 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
6325 connector->base.base.id,
6326 connector->base.name);
6328 if (connector->get_hw_state(connector)) {
6329 struct intel_encoder *encoder = connector->encoder;
6330 struct drm_connector_state *conn_state = connector->base.state;
6332 I915_STATE_WARN(!crtc,
6333 "connector enabled without attached crtc\n");
6338 I915_STATE_WARN(!crtc->state->active,
6339 "connector is active, but attached crtc isn't\n");
6341 if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
6344 I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
6345 "atomic encoder doesn't match attached encoder\n");
6347 I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
6348 "attached encoder crtc differs from connector crtc\n");
6350 I915_STATE_WARN(crtc && crtc->state->active,
6351 "attached crtc is active, but connector isn't\n");
6352 I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
6353 "best encoder set without crtc!\n");
6357 int intel_connector_init(struct intel_connector *connector)
6359 drm_atomic_helper_connector_reset(&connector->base);
6361 if (!connector->base.state)
6367 struct intel_connector *intel_connector_alloc(void)
6369 struct intel_connector *connector;
6371 connector = kzalloc(sizeof *connector, GFP_KERNEL);
6375 if (intel_connector_init(connector) < 0) {
6383 /* Simple connector->get_hw_state implementation for encoders that support only
6384 * one connector and no cloning and hence the encoder state determines the state
6385 * of the connector. */
6386 bool intel_connector_get_hw_state(struct intel_connector *connector)
6389 struct intel_encoder *encoder = connector->encoder;
6391 return encoder->get_hw_state(encoder, &pipe);
6394 static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
6396 if (crtc_state->base.enable && crtc_state->has_pch_encoder)
6397 return crtc_state->fdi_lanes;
6402 static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
6403 struct intel_crtc_state *pipe_config)
6405 struct drm_atomic_state *state = pipe_config->base.state;
6406 struct intel_crtc *other_crtc;
6407 struct intel_crtc_state *other_crtc_state;
6409 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
6410 pipe_name(pipe), pipe_config->fdi_lanes);
6411 if (pipe_config->fdi_lanes > 4) {
6412 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
6413 pipe_name(pipe), pipe_config->fdi_lanes);
6417 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
6418 if (pipe_config->fdi_lanes > 2) {
6419 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
6420 pipe_config->fdi_lanes);
6427 if (INTEL_INFO(dev)->num_pipes == 2)
6430 /* Ivybridge 3 pipe is really complicated */
6435 if (pipe_config->fdi_lanes <= 2)
6438 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_C));
6440 intel_atomic_get_crtc_state(state, other_crtc);
6441 if (IS_ERR(other_crtc_state))
6442 return PTR_ERR(other_crtc_state);
6444 if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
6445 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
6446 pipe_name(pipe), pipe_config->fdi_lanes);
6451 if (pipe_config->fdi_lanes > 2) {
6452 DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
6453 pipe_name(pipe), pipe_config->fdi_lanes);
6457 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_B));
6459 intel_atomic_get_crtc_state(state, other_crtc);
6460 if (IS_ERR(other_crtc_state))
6461 return PTR_ERR(other_crtc_state);
6463 if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
6464 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
6474 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
6475 struct intel_crtc_state *pipe_config)
6477 struct drm_device *dev = intel_crtc->base.dev;
6478 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6479 int lane, link_bw, fdi_dotclock, ret;
6480 bool needs_recompute = false;
6483 /* FDI is a binary signal running at ~2.7GHz, encoding
6484 * each output octet as 10 bits. The actual frequency
6485 * is stored as a divider into a 100MHz clock, and the
6486 * mode pixel clock is stored in units of 1KHz.
6487 * Hence the bw of each lane in terms of the mode signal
6490 link_bw = intel_fdi_link_freq(to_i915(dev), pipe_config);
6492 fdi_dotclock = adjusted_mode->crtc_clock;
6494 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
6495 pipe_config->pipe_bpp);
6497 pipe_config->fdi_lanes = lane;
6499 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
6500 link_bw, &pipe_config->fdi_m_n);
6502 ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
6503 if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
6504 pipe_config->pipe_bpp -= 2*3;
6505 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
6506 pipe_config->pipe_bpp);
6507 needs_recompute = true;
6508 pipe_config->bw_constrained = true;
6513 if (needs_recompute)
6519 static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
6520 struct intel_crtc_state *pipe_config)
6522 if (pipe_config->pipe_bpp > 24)
6525 /* HSW can handle pixel rate up to cdclk? */
6526 if (IS_HASWELL(dev_priv))
6530 * We compare against max which means we must take
6531 * the increased cdclk requirement into account when
6532 * calculating the new cdclk.
6534 * Should measure whether using a lower cdclk w/o IPS
6536 return ilk_pipe_pixel_rate(pipe_config) <=
6537 dev_priv->max_cdclk_freq * 95 / 100;
6540 static void hsw_compute_ips_config(struct intel_crtc *crtc,
6541 struct intel_crtc_state *pipe_config)
6543 struct drm_device *dev = crtc->base.dev;
6544 struct drm_i915_private *dev_priv = dev->dev_private;
6546 pipe_config->ips_enabled = i915.enable_ips &&
6547 hsw_crtc_supports_ips(crtc) &&
6548 pipe_config_supports_ips(dev_priv, pipe_config);
6551 static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
6553 const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6555 /* GDG double wide on either pipe, otherwise pipe A only */
6556 return INTEL_INFO(dev_priv)->gen < 4 &&
6557 (crtc->pipe == PIPE_A || IS_I915G(dev_priv));
6560 static int intel_crtc_compute_config(struct intel_crtc *crtc,
6561 struct intel_crtc_state *pipe_config)
6563 struct drm_device *dev = crtc->base.dev;
6564 struct drm_i915_private *dev_priv = dev->dev_private;
6565 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6567 /* FIXME should check pixel clock limits on all platforms */
6568 if (INTEL_INFO(dev)->gen < 4) {
6569 int clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
6572 * Enable double wide mode when the dot clock
6573 * is > 90% of the (display) core speed.
6575 if (intel_crtc_supports_double_wide(crtc) &&
6576 adjusted_mode->crtc_clock > clock_limit) {
6578 pipe_config->double_wide = true;
6581 if (adjusted_mode->crtc_clock > clock_limit) {
6582 DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
6583 adjusted_mode->crtc_clock, clock_limit,
6584 yesno(pipe_config->double_wide));
6590 * Pipe horizontal size must be even in:
6592 * - LVDS dual channel mode
6593 * - Double wide pipe
6595 if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
6596 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
6597 pipe_config->pipe_src_w &= ~1;
6599 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
6600 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
6602 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
6603 adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
6607 hsw_compute_ips_config(crtc, pipe_config);
6609 if (pipe_config->has_pch_encoder)
6610 return ironlake_fdi_compute_config(crtc, pipe_config);
6615 static int skylake_get_display_clock_speed(struct drm_device *dev)
6617 struct drm_i915_private *dev_priv = to_i915(dev);
6618 uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
6619 uint32_t cdctl = I915_READ(CDCLK_CTL);
6622 if (!(lcpll1 & LCPLL_PLL_ENABLE))
6623 return 24000; /* 24MHz is the cd freq with NSSC ref */
6625 if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
6628 linkrate = (I915_READ(DPLL_CTRL1) &
6629 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
6631 if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
6632 linkrate == DPLL_CTRL1_LINK_RATE_1080) {
6634 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6635 case CDCLK_FREQ_450_432:
6637 case CDCLK_FREQ_337_308:
6639 case CDCLK_FREQ_675_617:
6642 WARN(1, "Unknown cd freq selection\n");
6646 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6647 case CDCLK_FREQ_450_432:
6649 case CDCLK_FREQ_337_308:
6651 case CDCLK_FREQ_675_617:
6654 WARN(1, "Unknown cd freq selection\n");
6658 /* error case, do as if DPLL0 isn't enabled */
6662 static int broxton_get_display_clock_speed(struct drm_device *dev)
6664 struct drm_i915_private *dev_priv = to_i915(dev);
6665 uint32_t cdctl = I915_READ(CDCLK_CTL);
6666 uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
6667 uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
6670 if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
6673 cdclk = 19200 * pll_ratio / 2;
6675 switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
6676 case BXT_CDCLK_CD2X_DIV_SEL_1:
6677 return cdclk; /* 576MHz or 624MHz */
6678 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
6679 return cdclk * 2 / 3; /* 384MHz */
6680 case BXT_CDCLK_CD2X_DIV_SEL_2:
6681 return cdclk / 2; /* 288MHz */
6682 case BXT_CDCLK_CD2X_DIV_SEL_4:
6683 return cdclk / 4; /* 144MHz */
6686 /* error case, do as if DE PLL isn't enabled */
6690 static int broadwell_get_display_clock_speed(struct drm_device *dev)
6692 struct drm_i915_private *dev_priv = dev->dev_private;
6693 uint32_t lcpll = I915_READ(LCPLL_CTL);
6694 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6696 if (lcpll & LCPLL_CD_SOURCE_FCLK)
6698 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6700 else if (freq == LCPLL_CLK_FREQ_450)
6702 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
6704 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
6710 static int haswell_get_display_clock_speed(struct drm_device *dev)
6712 struct drm_i915_private *dev_priv = dev->dev_private;
6713 uint32_t lcpll = I915_READ(LCPLL_CTL);
6714 uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6716 if (lcpll & LCPLL_CD_SOURCE_FCLK)
6718 else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6720 else if (freq == LCPLL_CLK_FREQ_450)
6722 else if (IS_HSW_ULT(dev))
6728 static int valleyview_get_display_clock_speed(struct drm_device *dev)
6730 return vlv_get_cck_clock_hpll(to_i915(dev), "cdclk",
6731 CCK_DISPLAY_CLOCK_CONTROL);
6734 static int ilk_get_display_clock_speed(struct drm_device *dev)
6739 static int i945_get_display_clock_speed(struct drm_device *dev)
6744 static int i915_get_display_clock_speed(struct drm_device *dev)
6749 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
6754 static int pnv_get_display_clock_speed(struct drm_device *dev)
6758 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6760 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6761 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
6763 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
6765 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
6767 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
6770 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
6771 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
6773 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
6778 static int i915gm_get_display_clock_speed(struct drm_device *dev)
6782 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6784 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
6787 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6788 case GC_DISPLAY_CLOCK_333_MHZ:
6791 case GC_DISPLAY_CLOCK_190_200_MHZ:
6797 static int i865_get_display_clock_speed(struct drm_device *dev)
6802 static int i85x_get_display_clock_speed(struct drm_device *dev)
6807 * 852GM/852GMV only supports 133 MHz and the HPLLCC
6808 * encoding is different :(
6809 * FIXME is this the right way to detect 852GM/852GMV?
6811 if (dev->pdev->revision == 0x1)
6814 pci_bus_read_config_word(dev->pdev->bus,
6815 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
6817 /* Assume that the hardware is in the high speed state. This
6818 * should be the default.
6820 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
6821 case GC_CLOCK_133_200:
6822 case GC_CLOCK_133_200_2:
6823 case GC_CLOCK_100_200:
6825 case GC_CLOCK_166_250:
6827 case GC_CLOCK_100_133:
6829 case GC_CLOCK_133_266:
6830 case GC_CLOCK_133_266_2:
6831 case GC_CLOCK_166_266:
6835 /* Shouldn't happen */
6839 static int i830_get_display_clock_speed(struct drm_device *dev)
6844 static unsigned int intel_hpll_vco(struct drm_device *dev)
6846 struct drm_i915_private *dev_priv = dev->dev_private;
6847 static const unsigned int blb_vco[8] = {
6854 static const unsigned int pnv_vco[8] = {
6861 static const unsigned int cl_vco[8] = {
6870 static const unsigned int elk_vco[8] = {
6876 static const unsigned int ctg_vco[8] = {
6884 const unsigned int *vco_table;
6888 /* FIXME other chipsets? */
6890 vco_table = ctg_vco;
6891 else if (IS_G4X(dev))
6892 vco_table = elk_vco;
6893 else if (IS_CRESTLINE(dev))
6895 else if (IS_PINEVIEW(dev))
6896 vco_table = pnv_vco;
6897 else if (IS_G33(dev))
6898 vco_table = blb_vco;
6902 tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
6904 vco = vco_table[tmp & 0x7];
6906 DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
6908 DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
6913 static int gm45_get_display_clock_speed(struct drm_device *dev)
6915 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
6918 pci_read_config_word(dev->pdev, GCFGC, &tmp);
6920 cdclk_sel = (tmp >> 12) & 0x1;
6926 return cdclk_sel ? 333333 : 222222;
6928 return cdclk_sel ? 320000 : 228571;
6930 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
6935 static int i965gm_get_display_clock_speed(struct drm_device *dev)
6937 static const uint8_t div_3200[] = { 16, 10, 8 };
6938 static const uint8_t div_4000[] = { 20, 12, 10 };
6939 static const uint8_t div_5333[] = { 24, 16, 14 };
6940 const uint8_t *div_table;
6941 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
6944 pci_read_config_word(dev->pdev, GCFGC, &tmp);
6946 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
6948 if (cdclk_sel >= ARRAY_SIZE(div_3200))
6953 div_table = div_3200;
6956 div_table = div_4000;
6959 div_table = div_5333;
6965 return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
6968 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
6972 static int g33_get_display_clock_speed(struct drm_device *dev)
6974 static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
6975 static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
6976 static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
6977 static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
6978 const uint8_t *div_table;
6979 unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
6982 pci_read_config_word(dev->pdev, GCFGC, &tmp);
6984 cdclk_sel = (tmp >> 4) & 0x7;
6986 if (cdclk_sel >= ARRAY_SIZE(div_3200))
6991 div_table = div_3200;
6994 div_table = div_4000;
6997 div_table = div_4800;
7000 div_table = div_5333;
7006 return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7009 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
7014 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
7016 while (*num > DATA_LINK_M_N_MASK ||
7017 *den > DATA_LINK_M_N_MASK) {
7023 static void compute_m_n(unsigned int m, unsigned int n,
7024 uint32_t *ret_m, uint32_t *ret_n)
7026 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
7027 *ret_m = div_u64((uint64_t) m * *ret_n, n);
7028 intel_reduce_m_n_ratio(ret_m, ret_n);
7032 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
7033 int pixel_clock, int link_clock,
7034 struct intel_link_m_n *m_n)
7038 compute_m_n(bits_per_pixel * pixel_clock,
7039 link_clock * nlanes * 8,
7040 &m_n->gmch_m, &m_n->gmch_n);
7042 compute_m_n(pixel_clock, link_clock,
7043 &m_n->link_m, &m_n->link_n);
7046 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
7048 if (i915.panel_use_ssc >= 0)
7049 return i915.panel_use_ssc != 0;
7050 return dev_priv->vbt.lvds_use_ssc
7051 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
7054 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
7056 return (1 << dpll->n) << 16 | dpll->m2;
7059 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
7061 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
7064 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
7065 struct intel_crtc_state *crtc_state,
7066 intel_clock_t *reduced_clock)
7068 struct drm_device *dev = crtc->base.dev;
7071 if (IS_PINEVIEW(dev)) {
7072 fp = pnv_dpll_compute_fp(&crtc_state->dpll);
7074 fp2 = pnv_dpll_compute_fp(reduced_clock);
7076 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
7078 fp2 = i9xx_dpll_compute_fp(reduced_clock);
7081 crtc_state->dpll_hw_state.fp0 = fp;
7083 crtc->lowfreq_avail = false;
7084 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7086 crtc_state->dpll_hw_state.fp1 = fp2;
7087 crtc->lowfreq_avail = true;
7089 crtc_state->dpll_hw_state.fp1 = fp;
7093 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
7099 * PLLB opamp always calibrates to max value of 0x3f, force enable it
7100 * and set it to a reasonable value instead.
7102 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7103 reg_val &= 0xffffff00;
7104 reg_val |= 0x00000030;
7105 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7107 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7108 reg_val &= 0x8cffffff;
7109 reg_val = 0x8c000000;
7110 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7112 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7113 reg_val &= 0xffffff00;
7114 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7116 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7117 reg_val &= 0x00ffffff;
7118 reg_val |= 0xb0000000;
7119 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7122 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
7123 struct intel_link_m_n *m_n)
7125 struct drm_device *dev = crtc->base.dev;
7126 struct drm_i915_private *dev_priv = dev->dev_private;
7127 int pipe = crtc->pipe;
7129 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7130 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
7131 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
7132 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
7135 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
7136 struct intel_link_m_n *m_n,
7137 struct intel_link_m_n *m2_n2)
7139 struct drm_device *dev = crtc->base.dev;
7140 struct drm_i915_private *dev_priv = dev->dev_private;
7141 int pipe = crtc->pipe;
7142 enum transcoder transcoder = crtc->config->cpu_transcoder;
7144 if (INTEL_INFO(dev)->gen >= 5) {
7145 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
7146 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
7147 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
7148 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
7149 /* M2_N2 registers to be set only for gen < 8 (M2_N2 available
7150 * for gen < 8) and if DRRS is supported (to make sure the
7151 * registers are not unnecessarily accessed).
7153 if (m2_n2 && (IS_CHERRYVIEW(dev) || INTEL_INFO(dev)->gen < 8) &&
7154 crtc->config->has_drrs) {
7155 I915_WRITE(PIPE_DATA_M2(transcoder),
7156 TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
7157 I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
7158 I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
7159 I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
7162 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7163 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
7164 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
7165 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
7169 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
7171 struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
7174 dp_m_n = &crtc->config->dp_m_n;
7175 dp_m2_n2 = &crtc->config->dp_m2_n2;
7176 } else if (m_n == M2_N2) {
7179 * M2_N2 registers are not supported. Hence m2_n2 divider value
7180 * needs to be programmed into M1_N1.
7182 dp_m_n = &crtc->config->dp_m2_n2;
7184 DRM_ERROR("Unsupported divider value\n");
7188 if (crtc->config->has_pch_encoder)
7189 intel_pch_transcoder_set_m_n(crtc, &crtc->config->dp_m_n);
7191 intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
7194 static void vlv_compute_dpll(struct intel_crtc *crtc,
7195 struct intel_crtc_state *pipe_config)
7197 pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
7198 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
7199 if (crtc->pipe != PIPE_A)
7200 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7202 /* DPLL not used with DSI, but still need the rest set up */
7203 if (!pipe_config->has_dsi_encoder)
7204 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
7205 DPLL_EXT_BUFFER_ENABLE_VLV;
7207 pipe_config->dpll_hw_state.dpll_md =
7208 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7211 static void chv_compute_dpll(struct intel_crtc *crtc,
7212 struct intel_crtc_state *pipe_config)
7214 pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
7215 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
7216 if (crtc->pipe != PIPE_A)
7217 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7219 /* DPLL not used with DSI, but still need the rest set up */
7220 if (!pipe_config->has_dsi_encoder)
7221 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
7223 pipe_config->dpll_hw_state.dpll_md =
7224 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7227 static void vlv_prepare_pll(struct intel_crtc *crtc,
7228 const struct intel_crtc_state *pipe_config)
7230 struct drm_device *dev = crtc->base.dev;
7231 struct drm_i915_private *dev_priv = dev->dev_private;
7232 enum pipe pipe = crtc->pipe;
7234 u32 bestn, bestm1, bestm2, bestp1, bestp2;
7235 u32 coreclk, reg_val;
7238 I915_WRITE(DPLL(pipe),
7239 pipe_config->dpll_hw_state.dpll &
7240 ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
7242 /* No need to actually set up the DPLL with DSI */
7243 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7246 mutex_lock(&dev_priv->sb_lock);
7248 bestn = pipe_config->dpll.n;
7249 bestm1 = pipe_config->dpll.m1;
7250 bestm2 = pipe_config->dpll.m2;
7251 bestp1 = pipe_config->dpll.p1;
7252 bestp2 = pipe_config->dpll.p2;
7254 /* See eDP HDMI DPIO driver vbios notes doc */
7256 /* PLL B needs special handling */
7258 vlv_pllb_recal_opamp(dev_priv, pipe);
7260 /* Set up Tx target for periodic Rcomp update */
7261 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
7263 /* Disable target IRef on PLL */
7264 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
7265 reg_val &= 0x00ffffff;
7266 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
7268 /* Disable fast lock */
7269 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
7271 /* Set idtafcrecal before PLL is enabled */
7272 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
7273 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
7274 mdiv |= ((bestn << DPIO_N_SHIFT));
7275 mdiv |= (1 << DPIO_K_SHIFT);
7278 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
7279 * but we don't support that).
7280 * Note: don't use the DAC post divider as it seems unstable.
7282 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
7283 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7285 mdiv |= DPIO_ENABLE_CALIBRATION;
7286 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7288 /* Set HBR and RBR LPF coefficients */
7289 if (pipe_config->port_clock == 162000 ||
7290 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
7291 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
7292 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7295 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7298 if (pipe_config->has_dp_encoder) {
7299 /* Use SSC source */
7301 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7304 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7306 } else { /* HDMI or VGA */
7307 /* Use bend source */
7309 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7312 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7316 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
7317 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
7318 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
7319 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
7320 coreclk |= 0x01000000;
7321 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
7323 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
7324 mutex_unlock(&dev_priv->sb_lock);
7327 static void chv_prepare_pll(struct intel_crtc *crtc,
7328 const struct intel_crtc_state *pipe_config)
7330 struct drm_device *dev = crtc->base.dev;
7331 struct drm_i915_private *dev_priv = dev->dev_private;
7332 enum pipe pipe = crtc->pipe;
7333 enum dpio_channel port = vlv_pipe_to_channel(pipe);
7334 u32 loopfilter, tribuf_calcntr;
7335 u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
7339 /* Enable Refclk and SSC */
7340 I915_WRITE(DPLL(pipe),
7341 pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
7343 /* No need to actually set up the DPLL with DSI */
7344 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7347 bestn = pipe_config->dpll.n;
7348 bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
7349 bestm1 = pipe_config->dpll.m1;
7350 bestm2 = pipe_config->dpll.m2 >> 22;
7351 bestp1 = pipe_config->dpll.p1;
7352 bestp2 = pipe_config->dpll.p2;
7353 vco = pipe_config->dpll.vco;
7357 mutex_lock(&dev_priv->sb_lock);
7359 /* p1 and p2 divider */
7360 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
7361 5 << DPIO_CHV_S1_DIV_SHIFT |
7362 bestp1 << DPIO_CHV_P1_DIV_SHIFT |
7363 bestp2 << DPIO_CHV_P2_DIV_SHIFT |
7364 1 << DPIO_CHV_K_DIV_SHIFT);
7366 /* Feedback post-divider - m2 */
7367 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
7369 /* Feedback refclk divider - n and m1 */
7370 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
7371 DPIO_CHV_M1_DIV_BY_2 |
7372 1 << DPIO_CHV_N_DIV_SHIFT);
7374 /* M2 fraction division */
7375 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
7377 /* M2 fraction division enable */
7378 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
7379 dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
7380 dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
7382 dpio_val |= DPIO_CHV_FRAC_DIV_EN;
7383 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
7385 /* Program digital lock detect threshold */
7386 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
7387 dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
7388 DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
7389 dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
7391 dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
7392 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
7395 if (vco == 5400000) {
7396 loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
7397 loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
7398 loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
7399 tribuf_calcntr = 0x9;
7400 } else if (vco <= 6200000) {
7401 loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
7402 loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
7403 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7404 tribuf_calcntr = 0x9;
7405 } else if (vco <= 6480000) {
7406 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7407 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7408 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7409 tribuf_calcntr = 0x8;
7411 /* Not supported. Apply the same limits as in the max case */
7412 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7413 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7414 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7417 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
7419 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
7420 dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
7421 dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
7422 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
7425 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
7426 vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
7429 mutex_unlock(&dev_priv->sb_lock);
7433 * vlv_force_pll_on - forcibly enable just the PLL
7434 * @dev_priv: i915 private structure
7435 * @pipe: pipe PLL to enable
7436 * @dpll: PLL configuration
7438 * Enable the PLL for @pipe using the supplied @dpll config. To be used
7439 * in cases where we need the PLL enabled even when @pipe is not going to
7442 int vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
7443 const struct dpll *dpll)
7445 struct intel_crtc *crtc =
7446 to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
7447 struct intel_crtc_state *pipe_config;
7449 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
7453 pipe_config->base.crtc = &crtc->base;
7454 pipe_config->pixel_multiplier = 1;
7455 pipe_config->dpll = *dpll;
7457 if (IS_CHERRYVIEW(dev)) {
7458 chv_compute_dpll(crtc, pipe_config);
7459 chv_prepare_pll(crtc, pipe_config);
7460 chv_enable_pll(crtc, pipe_config);
7462 vlv_compute_dpll(crtc, pipe_config);
7463 vlv_prepare_pll(crtc, pipe_config);
7464 vlv_enable_pll(crtc, pipe_config);
7473 * vlv_force_pll_off - forcibly disable just the PLL
7474 * @dev_priv: i915 private structure
7475 * @pipe: pipe PLL to disable
7477 * Disable the PLL for @pipe. To be used in cases where we need
7478 * the PLL enabled even when @pipe is not going to be enabled.
7480 void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
7482 if (IS_CHERRYVIEW(dev))
7483 chv_disable_pll(to_i915(dev), pipe);
7485 vlv_disable_pll(to_i915(dev), pipe);
7488 static void i9xx_compute_dpll(struct intel_crtc *crtc,
7489 struct intel_crtc_state *crtc_state,
7490 intel_clock_t *reduced_clock)
7492 struct drm_device *dev = crtc->base.dev;
7493 struct drm_i915_private *dev_priv = dev->dev_private;
7496 struct dpll *clock = &crtc_state->dpll;
7498 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7500 is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
7501 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
7503 dpll = DPLL_VGA_MODE_DIS;
7505 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
7506 dpll |= DPLLB_MODE_LVDS;
7508 dpll |= DPLLB_MODE_DAC_SERIAL;
7510 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
7511 dpll |= (crtc_state->pixel_multiplier - 1)
7512 << SDVO_MULTIPLIER_SHIFT_HIRES;
7516 dpll |= DPLL_SDVO_HIGH_SPEED;
7518 if (crtc_state->has_dp_encoder)
7519 dpll |= DPLL_SDVO_HIGH_SPEED;
7521 /* compute bitmask from p1 value */
7522 if (IS_PINEVIEW(dev))
7523 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
7525 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7526 if (IS_G4X(dev) && reduced_clock)
7527 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
7529 switch (clock->p2) {
7531 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
7534 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
7537 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
7540 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
7543 if (INTEL_INFO(dev)->gen >= 4)
7544 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
7546 if (crtc_state->sdvo_tv_clock)
7547 dpll |= PLL_REF_INPUT_TVCLKINBC;
7548 else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7549 intel_panel_use_ssc(dev_priv))
7550 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7552 dpll |= PLL_REF_INPUT_DREFCLK;
7554 dpll |= DPLL_VCO_ENABLE;
7555 crtc_state->dpll_hw_state.dpll = dpll;
7557 if (INTEL_INFO(dev)->gen >= 4) {
7558 u32 dpll_md = (crtc_state->pixel_multiplier - 1)
7559 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7560 crtc_state->dpll_hw_state.dpll_md = dpll_md;
7564 static void i8xx_compute_dpll(struct intel_crtc *crtc,
7565 struct intel_crtc_state *crtc_state,
7566 intel_clock_t *reduced_clock)
7568 struct drm_device *dev = crtc->base.dev;
7569 struct drm_i915_private *dev_priv = dev->dev_private;
7571 struct dpll *clock = &crtc_state->dpll;
7573 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7575 dpll = DPLL_VGA_MODE_DIS;
7577 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7578 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7581 dpll |= PLL_P1_DIVIDE_BY_TWO;
7583 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7585 dpll |= PLL_P2_DIVIDE_BY_4;
7588 if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
7589 dpll |= DPLL_DVO_2X_MODE;
7591 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7592 intel_panel_use_ssc(dev_priv))
7593 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7595 dpll |= PLL_REF_INPUT_DREFCLK;
7597 dpll |= DPLL_VCO_ENABLE;
7598 crtc_state->dpll_hw_state.dpll = dpll;
7601 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
7603 struct drm_device *dev = intel_crtc->base.dev;
7604 struct drm_i915_private *dev_priv = dev->dev_private;
7605 enum pipe pipe = intel_crtc->pipe;
7606 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
7607 const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
7608 uint32_t crtc_vtotal, crtc_vblank_end;
7611 /* We need to be careful not to changed the adjusted mode, for otherwise
7612 * the hw state checker will get angry at the mismatch. */
7613 crtc_vtotal = adjusted_mode->crtc_vtotal;
7614 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
7616 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
7617 /* the chip adds 2 halflines automatically */
7619 crtc_vblank_end -= 1;
7621 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7622 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
7624 vsyncshift = adjusted_mode->crtc_hsync_start -
7625 adjusted_mode->crtc_htotal / 2;
7627 vsyncshift += adjusted_mode->crtc_htotal;
7630 if (INTEL_INFO(dev)->gen > 3)
7631 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
7633 I915_WRITE(HTOTAL(cpu_transcoder),
7634 (adjusted_mode->crtc_hdisplay - 1) |
7635 ((adjusted_mode->crtc_htotal - 1) << 16));
7636 I915_WRITE(HBLANK(cpu_transcoder),
7637 (adjusted_mode->crtc_hblank_start - 1) |
7638 ((adjusted_mode->crtc_hblank_end - 1) << 16));
7639 I915_WRITE(HSYNC(cpu_transcoder),
7640 (adjusted_mode->crtc_hsync_start - 1) |
7641 ((adjusted_mode->crtc_hsync_end - 1) << 16));
7643 I915_WRITE(VTOTAL(cpu_transcoder),
7644 (adjusted_mode->crtc_vdisplay - 1) |
7645 ((crtc_vtotal - 1) << 16));
7646 I915_WRITE(VBLANK(cpu_transcoder),
7647 (adjusted_mode->crtc_vblank_start - 1) |
7648 ((crtc_vblank_end - 1) << 16));
7649 I915_WRITE(VSYNC(cpu_transcoder),
7650 (adjusted_mode->crtc_vsync_start - 1) |
7651 ((adjusted_mode->crtc_vsync_end - 1) << 16));
7653 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
7654 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
7655 * documented on the DDI_FUNC_CTL register description, EDP Input Select
7657 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
7658 (pipe == PIPE_B || pipe == PIPE_C))
7659 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
7663 static void intel_set_pipe_src_size(struct intel_crtc *intel_crtc)
7665 struct drm_device *dev = intel_crtc->base.dev;
7666 struct drm_i915_private *dev_priv = dev->dev_private;
7667 enum pipe pipe = intel_crtc->pipe;
7669 /* pipesrc controls the size that is scaled from, which should
7670 * always be the user's requested size.
7672 I915_WRITE(PIPESRC(pipe),
7673 ((intel_crtc->config->pipe_src_w - 1) << 16) |
7674 (intel_crtc->config->pipe_src_h - 1));
7677 static void intel_get_pipe_timings(struct intel_crtc *crtc,
7678 struct intel_crtc_state *pipe_config)
7680 struct drm_device *dev = crtc->base.dev;
7681 struct drm_i915_private *dev_priv = dev->dev_private;
7682 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
7685 tmp = I915_READ(HTOTAL(cpu_transcoder));
7686 pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
7687 pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
7688 tmp = I915_READ(HBLANK(cpu_transcoder));
7689 pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
7690 pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
7691 tmp = I915_READ(HSYNC(cpu_transcoder));
7692 pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
7693 pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
7695 tmp = I915_READ(VTOTAL(cpu_transcoder));
7696 pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
7697 pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
7698 tmp = I915_READ(VBLANK(cpu_transcoder));
7699 pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
7700 pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
7701 tmp = I915_READ(VSYNC(cpu_transcoder));
7702 pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
7703 pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
7705 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
7706 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
7707 pipe_config->base.adjusted_mode.crtc_vtotal += 1;
7708 pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
7712 static void intel_get_pipe_src_size(struct intel_crtc *crtc,
7713 struct intel_crtc_state *pipe_config)
7715 struct drm_device *dev = crtc->base.dev;
7716 struct drm_i915_private *dev_priv = dev->dev_private;
7719 tmp = I915_READ(PIPESRC(crtc->pipe));
7720 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
7721 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
7723 pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
7724 pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
7727 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
7728 struct intel_crtc_state *pipe_config)
7730 mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
7731 mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
7732 mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
7733 mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
7735 mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
7736 mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
7737 mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
7738 mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
7740 mode->flags = pipe_config->base.adjusted_mode.flags;
7741 mode->type = DRM_MODE_TYPE_DRIVER;
7743 mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
7744 mode->flags |= pipe_config->base.adjusted_mode.flags;
7746 mode->hsync = drm_mode_hsync(mode);
7747 mode->vrefresh = drm_mode_vrefresh(mode);
7748 drm_mode_set_name(mode);
7751 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
7753 struct drm_device *dev = intel_crtc->base.dev;
7754 struct drm_i915_private *dev_priv = dev->dev_private;
7759 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
7760 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
7761 pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
7763 if (intel_crtc->config->double_wide)
7764 pipeconf |= PIPECONF_DOUBLE_WIDE;
7766 /* only g4x and later have fancy bpc/dither controls */
7767 if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
7768 /* Bspec claims that we can't use dithering for 30bpp pipes. */
7769 if (intel_crtc->config->dither && intel_crtc->config->pipe_bpp != 30)
7770 pipeconf |= PIPECONF_DITHER_EN |
7771 PIPECONF_DITHER_TYPE_SP;
7773 switch (intel_crtc->config->pipe_bpp) {
7775 pipeconf |= PIPECONF_6BPC;
7778 pipeconf |= PIPECONF_8BPC;
7781 pipeconf |= PIPECONF_10BPC;
7784 /* Case prevented by intel_choose_pipe_bpp_dither. */
7789 if (HAS_PIPE_CXSR(dev)) {
7790 if (intel_crtc->lowfreq_avail) {
7791 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
7792 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
7794 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
7798 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
7799 if (INTEL_INFO(dev)->gen < 4 ||
7800 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7801 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
7803 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
7805 pipeconf |= PIPECONF_PROGRESSIVE;
7807 if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
7808 intel_crtc->config->limited_color_range)
7809 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
7811 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
7812 POSTING_READ(PIPECONF(intel_crtc->pipe));
7815 static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
7816 struct intel_crtc_state *crtc_state)
7818 struct drm_device *dev = crtc->base.dev;
7819 struct drm_i915_private *dev_priv = dev->dev_private;
7820 const intel_limit_t *limit;
7823 memset(&crtc_state->dpll_hw_state, 0,
7824 sizeof(crtc_state->dpll_hw_state));
7826 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7827 if (intel_panel_use_ssc(dev_priv)) {
7828 refclk = dev_priv->vbt.lvds_ssc_freq;
7829 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7832 limit = &intel_limits_i8xx_lvds;
7833 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO)) {
7834 limit = &intel_limits_i8xx_dvo;
7836 limit = &intel_limits_i8xx_dac;
7839 if (!crtc_state->clock_set &&
7840 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7841 refclk, NULL, &crtc_state->dpll)) {
7842 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7846 i8xx_compute_dpll(crtc, crtc_state, NULL);
7851 static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
7852 struct intel_crtc_state *crtc_state)
7854 struct drm_device *dev = crtc->base.dev;
7855 struct drm_i915_private *dev_priv = dev->dev_private;
7856 const intel_limit_t *limit;
7859 memset(&crtc_state->dpll_hw_state, 0,
7860 sizeof(crtc_state->dpll_hw_state));
7862 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7863 if (intel_panel_use_ssc(dev_priv)) {
7864 refclk = dev_priv->vbt.lvds_ssc_freq;
7865 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7868 if (intel_is_dual_link_lvds(dev))
7869 limit = &intel_limits_g4x_dual_channel_lvds;
7871 limit = &intel_limits_g4x_single_channel_lvds;
7872 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
7873 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
7874 limit = &intel_limits_g4x_hdmi;
7875 } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
7876 limit = &intel_limits_g4x_sdvo;
7878 /* The option is for other outputs */
7879 limit = &intel_limits_i9xx_sdvo;
7882 if (!crtc_state->clock_set &&
7883 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7884 refclk, NULL, &crtc_state->dpll)) {
7885 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7889 i9xx_compute_dpll(crtc, crtc_state, NULL);
7894 static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
7895 struct intel_crtc_state *crtc_state)
7897 struct drm_device *dev = crtc->base.dev;
7898 struct drm_i915_private *dev_priv = dev->dev_private;
7899 const intel_limit_t *limit;
7902 memset(&crtc_state->dpll_hw_state, 0,
7903 sizeof(crtc_state->dpll_hw_state));
7905 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7906 if (intel_panel_use_ssc(dev_priv)) {
7907 refclk = dev_priv->vbt.lvds_ssc_freq;
7908 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7911 limit = &intel_limits_pineview_lvds;
7913 limit = &intel_limits_pineview_sdvo;
7916 if (!crtc_state->clock_set &&
7917 !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7918 refclk, NULL, &crtc_state->dpll)) {
7919 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7923 i9xx_compute_dpll(crtc, crtc_state, NULL);
7928 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
7929 struct intel_crtc_state *crtc_state)
7931 struct drm_device *dev = crtc->base.dev;
7932 struct drm_i915_private *dev_priv = dev->dev_private;
7933 const intel_limit_t *limit;
7936 memset(&crtc_state->dpll_hw_state, 0,
7937 sizeof(crtc_state->dpll_hw_state));
7939 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7940 if (intel_panel_use_ssc(dev_priv)) {
7941 refclk = dev_priv->vbt.lvds_ssc_freq;
7942 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7945 limit = &intel_limits_i9xx_lvds;
7947 limit = &intel_limits_i9xx_sdvo;
7950 if (!crtc_state->clock_set &&
7951 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7952 refclk, NULL, &crtc_state->dpll)) {
7953 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7957 i9xx_compute_dpll(crtc, crtc_state, NULL);
7962 static int chv_crtc_compute_clock(struct intel_crtc *crtc,
7963 struct intel_crtc_state *crtc_state)
7965 int refclk = 100000;
7966 const intel_limit_t *limit = &intel_limits_chv;
7968 memset(&crtc_state->dpll_hw_state, 0,
7969 sizeof(crtc_state->dpll_hw_state));
7971 if (!crtc_state->clock_set &&
7972 !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7973 refclk, NULL, &crtc_state->dpll)) {
7974 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7978 chv_compute_dpll(crtc, crtc_state);
7983 static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
7984 struct intel_crtc_state *crtc_state)
7986 int refclk = 100000;
7987 const intel_limit_t *limit = &intel_limits_vlv;
7989 memset(&crtc_state->dpll_hw_state, 0,
7990 sizeof(crtc_state->dpll_hw_state));
7992 if (!crtc_state->clock_set &&
7993 !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
7994 refclk, NULL, &crtc_state->dpll)) {
7995 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7999 vlv_compute_dpll(crtc, crtc_state);
8004 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
8005 struct intel_crtc_state *pipe_config)
8007 struct drm_device *dev = crtc->base.dev;
8008 struct drm_i915_private *dev_priv = dev->dev_private;
8011 if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
8014 tmp = I915_READ(PFIT_CONTROL);
8015 if (!(tmp & PFIT_ENABLE))
8018 /* Check whether the pfit is attached to our pipe. */
8019 if (INTEL_INFO(dev)->gen < 4) {
8020 if (crtc->pipe != PIPE_B)
8023 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
8027 pipe_config->gmch_pfit.control = tmp;
8028 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
8031 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
8032 struct intel_crtc_state *pipe_config)
8034 struct drm_device *dev = crtc->base.dev;
8035 struct drm_i915_private *dev_priv = dev->dev_private;
8036 int pipe = pipe_config->cpu_transcoder;
8037 intel_clock_t clock;
8039 int refclk = 100000;
8041 /* In case of DSI, DPLL will not be used */
8042 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
8045 mutex_lock(&dev_priv->sb_lock);
8046 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
8047 mutex_unlock(&dev_priv->sb_lock);
8049 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
8050 clock.m2 = mdiv & DPIO_M2DIV_MASK;
8051 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
8052 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
8053 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
8055 pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
8059 i9xx_get_initial_plane_config(struct intel_crtc *crtc,
8060 struct intel_initial_plane_config *plane_config)
8062 struct drm_device *dev = crtc->base.dev;
8063 struct drm_i915_private *dev_priv = dev->dev_private;
8064 u32 val, base, offset;
8065 int pipe = crtc->pipe, plane = crtc->plane;
8066 int fourcc, pixel_format;
8067 unsigned int aligned_height;
8068 struct drm_framebuffer *fb;
8069 struct intel_framebuffer *intel_fb;
8071 val = I915_READ(DSPCNTR(plane));
8072 if (!(val & DISPLAY_PLANE_ENABLE))
8075 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8077 DRM_DEBUG_KMS("failed to alloc fb\n");
8081 fb = &intel_fb->base;
8083 if (INTEL_INFO(dev)->gen >= 4) {
8084 if (val & DISPPLANE_TILED) {
8085 plane_config->tiling = I915_TILING_X;
8086 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
8090 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
8091 fourcc = i9xx_format_to_fourcc(pixel_format);
8092 fb->pixel_format = fourcc;
8093 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
8095 if (INTEL_INFO(dev)->gen >= 4) {
8096 if (plane_config->tiling)
8097 offset = I915_READ(DSPTILEOFF(plane));
8099 offset = I915_READ(DSPLINOFF(plane));
8100 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
8102 base = I915_READ(DSPADDR(plane));
8104 plane_config->base = base;
8106 val = I915_READ(PIPESRC(pipe));
8107 fb->width = ((val >> 16) & 0xfff) + 1;
8108 fb->height = ((val >> 0) & 0xfff) + 1;
8110 val = I915_READ(DSPSTRIDE(pipe));
8111 fb->pitches[0] = val & 0xffffffc0;
8113 aligned_height = intel_fb_align_height(dev, fb->height,
8117 plane_config->size = fb->pitches[0] * aligned_height;
8119 DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8120 pipe_name(pipe), plane, fb->width, fb->height,
8121 fb->bits_per_pixel, base, fb->pitches[0],
8122 plane_config->size);
8124 plane_config->fb = intel_fb;
8127 static void chv_crtc_clock_get(struct intel_crtc *crtc,
8128 struct intel_crtc_state *pipe_config)
8130 struct drm_device *dev = crtc->base.dev;
8131 struct drm_i915_private *dev_priv = dev->dev_private;
8132 int pipe = pipe_config->cpu_transcoder;
8133 enum dpio_channel port = vlv_pipe_to_channel(pipe);
8134 intel_clock_t clock;
8135 u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
8136 int refclk = 100000;
8138 /* In case of DSI, DPLL will not be used */
8139 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
8142 mutex_lock(&dev_priv->sb_lock);
8143 cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
8144 pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
8145 pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
8146 pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
8147 pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
8148 mutex_unlock(&dev_priv->sb_lock);
8150 clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
8151 clock.m2 = (pll_dw0 & 0xff) << 22;
8152 if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
8153 clock.m2 |= pll_dw2 & 0x3fffff;
8154 clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
8155 clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
8156 clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
8158 pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
8161 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
8162 struct intel_crtc_state *pipe_config)
8164 struct drm_device *dev = crtc->base.dev;
8165 struct drm_i915_private *dev_priv = dev->dev_private;
8166 enum intel_display_power_domain power_domain;
8170 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
8171 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
8174 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8175 pipe_config->shared_dpll = NULL;
8179 tmp = I915_READ(PIPECONF(crtc->pipe));
8180 if (!(tmp & PIPECONF_ENABLE))
8183 if (IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
8184 switch (tmp & PIPECONF_BPC_MASK) {
8186 pipe_config->pipe_bpp = 18;
8189 pipe_config->pipe_bpp = 24;
8191 case PIPECONF_10BPC:
8192 pipe_config->pipe_bpp = 30;
8199 if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
8200 (tmp & PIPECONF_COLOR_RANGE_SELECT))
8201 pipe_config->limited_color_range = true;
8203 if (INTEL_INFO(dev)->gen < 4)
8204 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
8206 intel_get_pipe_timings(crtc, pipe_config);
8207 intel_get_pipe_src_size(crtc, pipe_config);
8209 i9xx_get_pfit_config(crtc, pipe_config);
8211 if (INTEL_INFO(dev)->gen >= 4) {
8212 /* No way to read it out on pipes B and C */
8213 if (IS_CHERRYVIEW(dev) && crtc->pipe != PIPE_A)
8214 tmp = dev_priv->chv_dpll_md[crtc->pipe];
8216 tmp = I915_READ(DPLL_MD(crtc->pipe));
8217 pipe_config->pixel_multiplier =
8218 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
8219 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
8220 pipe_config->dpll_hw_state.dpll_md = tmp;
8221 } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
8222 tmp = I915_READ(DPLL(crtc->pipe));
8223 pipe_config->pixel_multiplier =
8224 ((tmp & SDVO_MULTIPLIER_MASK)
8225 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
8227 /* Note that on i915G/GM the pixel multiplier is in the sdvo
8228 * port and will be fixed up in the encoder->get_config
8230 pipe_config->pixel_multiplier = 1;
8232 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
8233 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
8235 * DPLL_DVO_2X_MODE must be enabled for both DPLLs
8236 * on 830. Filter it out here so that we don't
8237 * report errors due to that.
8240 pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
8242 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
8243 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
8245 /* Mask out read-only status bits. */
8246 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
8247 DPLL_PORTC_READY_MASK |
8248 DPLL_PORTB_READY_MASK);
8251 if (IS_CHERRYVIEW(dev))
8252 chv_crtc_clock_get(crtc, pipe_config);
8253 else if (IS_VALLEYVIEW(dev))
8254 vlv_crtc_clock_get(crtc, pipe_config);
8256 i9xx_crtc_clock_get(crtc, pipe_config);
8259 * Normally the dotclock is filled in by the encoder .get_config()
8260 * but in case the pipe is enabled w/o any ports we need a sane
8263 pipe_config->base.adjusted_mode.crtc_clock =
8264 pipe_config->port_clock / pipe_config->pixel_multiplier;
8269 intel_display_power_put(dev_priv, power_domain);
8274 static void ironlake_init_pch_refclk(struct drm_device *dev)
8276 struct drm_i915_private *dev_priv = dev->dev_private;
8277 struct intel_encoder *encoder;
8279 bool has_lvds = false;
8280 bool has_cpu_edp = false;
8281 bool has_panel = false;
8282 bool has_ck505 = false;
8283 bool can_ssc = false;
8285 /* We need to take the global config into account */
8286 for_each_intel_encoder(dev, encoder) {
8287 switch (encoder->type) {
8288 case INTEL_OUTPUT_LVDS:
8292 case INTEL_OUTPUT_EDP:
8294 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
8302 if (HAS_PCH_IBX(dev)) {
8303 has_ck505 = dev_priv->vbt.display_clock_mode;
8304 can_ssc = has_ck505;
8310 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
8311 has_panel, has_lvds, has_ck505);
8313 /* Ironlake: try to setup display ref clock before DPLL
8314 * enabling. This is only under driver's control after
8315 * PCH B stepping, previous chipset stepping should be
8316 * ignoring this setting.
8318 val = I915_READ(PCH_DREF_CONTROL);
8320 /* As we must carefully and slowly disable/enable each source in turn,
8321 * compute the final state we want first and check if we need to
8322 * make any changes at all.
8325 final &= ~DREF_NONSPREAD_SOURCE_MASK;
8327 final |= DREF_NONSPREAD_CK505_ENABLE;
8329 final |= DREF_NONSPREAD_SOURCE_ENABLE;
8331 final &= ~DREF_SSC_SOURCE_MASK;
8332 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8333 final &= ~DREF_SSC1_ENABLE;
8336 final |= DREF_SSC_SOURCE_ENABLE;
8338 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8339 final |= DREF_SSC1_ENABLE;
8342 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8343 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8345 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8347 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8349 final |= DREF_SSC_SOURCE_DISABLE;
8350 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8356 /* Always enable nonspread source */
8357 val &= ~DREF_NONSPREAD_SOURCE_MASK;
8360 val |= DREF_NONSPREAD_CK505_ENABLE;
8362 val |= DREF_NONSPREAD_SOURCE_ENABLE;
8365 val &= ~DREF_SSC_SOURCE_MASK;
8366 val |= DREF_SSC_SOURCE_ENABLE;
8368 /* SSC must be turned on before enabling the CPU output */
8369 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8370 DRM_DEBUG_KMS("Using SSC on panel\n");
8371 val |= DREF_SSC1_ENABLE;
8373 val &= ~DREF_SSC1_ENABLE;
8375 /* Get SSC going before enabling the outputs */
8376 I915_WRITE(PCH_DREF_CONTROL, val);
8377 POSTING_READ(PCH_DREF_CONTROL);
8380 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8382 /* Enable CPU source on CPU attached eDP */
8384 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8385 DRM_DEBUG_KMS("Using SSC on eDP\n");
8386 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8388 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8390 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8392 I915_WRITE(PCH_DREF_CONTROL, val);
8393 POSTING_READ(PCH_DREF_CONTROL);
8396 DRM_DEBUG_KMS("Disabling SSC entirely\n");
8398 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8400 /* Turn off CPU output */
8401 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8403 I915_WRITE(PCH_DREF_CONTROL, val);
8404 POSTING_READ(PCH_DREF_CONTROL);
8407 /* Turn off the SSC source */
8408 val &= ~DREF_SSC_SOURCE_MASK;
8409 val |= DREF_SSC_SOURCE_DISABLE;
8412 val &= ~DREF_SSC1_ENABLE;
8414 I915_WRITE(PCH_DREF_CONTROL, val);
8415 POSTING_READ(PCH_DREF_CONTROL);
8419 BUG_ON(val != final);
8422 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
8426 tmp = I915_READ(SOUTH_CHICKEN2);
8427 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
8428 I915_WRITE(SOUTH_CHICKEN2, tmp);
8430 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
8431 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
8432 DRM_ERROR("FDI mPHY reset assert timeout\n");
8434 tmp = I915_READ(SOUTH_CHICKEN2);
8435 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
8436 I915_WRITE(SOUTH_CHICKEN2, tmp);
8438 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
8439 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
8440 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
8443 /* WaMPhyProgramming:hsw */
8444 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
8448 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
8449 tmp &= ~(0xFF << 24);
8450 tmp |= (0x12 << 24);
8451 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
8453 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
8455 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
8457 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
8459 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
8461 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
8462 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8463 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
8465 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
8466 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8467 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
8469 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
8472 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
8474 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
8477 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
8479 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
8482 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
8484 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
8487 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
8489 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
8490 tmp &= ~(0xFF << 16);
8491 tmp |= (0x1C << 16);
8492 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
8494 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
8495 tmp &= ~(0xFF << 16);
8496 tmp |= (0x1C << 16);
8497 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
8499 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
8501 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
8503 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
8505 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
8507 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
8508 tmp &= ~(0xF << 28);
8510 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
8512 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
8513 tmp &= ~(0xF << 28);
8515 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
8518 /* Implements 3 different sequences from BSpec chapter "Display iCLK
8519 * Programming" based on the parameters passed:
8520 * - Sequence to enable CLKOUT_DP
8521 * - Sequence to enable CLKOUT_DP without spread
8522 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
8524 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
8527 struct drm_i915_private *dev_priv = dev->dev_private;
8530 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
8532 if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
8535 mutex_lock(&dev_priv->sb_lock);
8537 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8538 tmp &= ~SBI_SSCCTL_DISABLE;
8539 tmp |= SBI_SSCCTL_PATHALT;
8540 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8545 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8546 tmp &= ~SBI_SSCCTL_PATHALT;
8547 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8550 lpt_reset_fdi_mphy(dev_priv);
8551 lpt_program_fdi_mphy(dev_priv);
8555 reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8556 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8557 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8558 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8560 mutex_unlock(&dev_priv->sb_lock);
8563 /* Sequence to disable CLKOUT_DP */
8564 static void lpt_disable_clkout_dp(struct drm_device *dev)
8566 struct drm_i915_private *dev_priv = dev->dev_private;
8569 mutex_lock(&dev_priv->sb_lock);
8571 reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8572 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8573 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8574 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8576 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8577 if (!(tmp & SBI_SSCCTL_DISABLE)) {
8578 if (!(tmp & SBI_SSCCTL_PATHALT)) {
8579 tmp |= SBI_SSCCTL_PATHALT;
8580 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8583 tmp |= SBI_SSCCTL_DISABLE;
8584 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8587 mutex_unlock(&dev_priv->sb_lock);
8590 #define BEND_IDX(steps) ((50 + (steps)) / 5)
8592 static const uint16_t sscdivintphase[] = {
8593 [BEND_IDX( 50)] = 0x3B23,
8594 [BEND_IDX( 45)] = 0x3B23,
8595 [BEND_IDX( 40)] = 0x3C23,
8596 [BEND_IDX( 35)] = 0x3C23,
8597 [BEND_IDX( 30)] = 0x3D23,
8598 [BEND_IDX( 25)] = 0x3D23,
8599 [BEND_IDX( 20)] = 0x3E23,
8600 [BEND_IDX( 15)] = 0x3E23,
8601 [BEND_IDX( 10)] = 0x3F23,
8602 [BEND_IDX( 5)] = 0x3F23,
8603 [BEND_IDX( 0)] = 0x0025,
8604 [BEND_IDX( -5)] = 0x0025,
8605 [BEND_IDX(-10)] = 0x0125,
8606 [BEND_IDX(-15)] = 0x0125,
8607 [BEND_IDX(-20)] = 0x0225,
8608 [BEND_IDX(-25)] = 0x0225,
8609 [BEND_IDX(-30)] = 0x0325,
8610 [BEND_IDX(-35)] = 0x0325,
8611 [BEND_IDX(-40)] = 0x0425,
8612 [BEND_IDX(-45)] = 0x0425,
8613 [BEND_IDX(-50)] = 0x0525,
8618 * steps -50 to 50 inclusive, in steps of 5
8619 * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
8620 * change in clock period = -(steps / 10) * 5.787 ps
8622 static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
8625 int idx = BEND_IDX(steps);
8627 if (WARN_ON(steps % 5 != 0))
8630 if (WARN_ON(idx >= ARRAY_SIZE(sscdivintphase)))
8633 mutex_lock(&dev_priv->sb_lock);
8635 if (steps % 10 != 0)
8639 intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);
8641 tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
8643 tmp |= sscdivintphase[idx];
8644 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);
8646 mutex_unlock(&dev_priv->sb_lock);
8651 static void lpt_init_pch_refclk(struct drm_device *dev)
8653 struct intel_encoder *encoder;
8654 bool has_vga = false;
8656 for_each_intel_encoder(dev, encoder) {
8657 switch (encoder->type) {
8658 case INTEL_OUTPUT_ANALOG:
8667 lpt_bend_clkout_dp(to_i915(dev), 0);
8668 lpt_enable_clkout_dp(dev, true, true);
8670 lpt_disable_clkout_dp(dev);
8675 * Initialize reference clocks when the driver loads
8677 void intel_init_pch_refclk(struct drm_device *dev)
8679 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
8680 ironlake_init_pch_refclk(dev);
8681 else if (HAS_PCH_LPT(dev))
8682 lpt_init_pch_refclk(dev);
8685 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
8687 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8688 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8689 int pipe = intel_crtc->pipe;
8694 switch (intel_crtc->config->pipe_bpp) {
8696 val |= PIPECONF_6BPC;
8699 val |= PIPECONF_8BPC;
8702 val |= PIPECONF_10BPC;
8705 val |= PIPECONF_12BPC;
8708 /* Case prevented by intel_choose_pipe_bpp_dither. */
8712 if (intel_crtc->config->dither)
8713 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8715 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8716 val |= PIPECONF_INTERLACED_ILK;
8718 val |= PIPECONF_PROGRESSIVE;
8720 if (intel_crtc->config->limited_color_range)
8721 val |= PIPECONF_COLOR_RANGE_SELECT;
8723 I915_WRITE(PIPECONF(pipe), val);
8724 POSTING_READ(PIPECONF(pipe));
8727 static void haswell_set_pipeconf(struct drm_crtc *crtc)
8729 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8730 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8731 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
8734 if (IS_HASWELL(dev_priv) && intel_crtc->config->dither)
8735 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8737 if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8738 val |= PIPECONF_INTERLACED_ILK;
8740 val |= PIPECONF_PROGRESSIVE;
8742 I915_WRITE(PIPECONF(cpu_transcoder), val);
8743 POSTING_READ(PIPECONF(cpu_transcoder));
8746 static void haswell_set_pipemisc(struct drm_crtc *crtc)
8748 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8749 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8751 if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
8754 switch (intel_crtc->config->pipe_bpp) {
8756 val |= PIPEMISC_DITHER_6_BPC;
8759 val |= PIPEMISC_DITHER_8_BPC;
8762 val |= PIPEMISC_DITHER_10_BPC;
8765 val |= PIPEMISC_DITHER_12_BPC;
8768 /* Case prevented by pipe_config_set_bpp. */
8772 if (intel_crtc->config->dither)
8773 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
8775 I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
8779 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
8782 * Account for spread spectrum to avoid
8783 * oversubscribing the link. Max center spread
8784 * is 2.5%; use 5% for safety's sake.
8786 u32 bps = target_clock * bpp * 21 / 20;
8787 return DIV_ROUND_UP(bps, link_bw * 8);
8790 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
8792 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
8795 static void ironlake_compute_dpll(struct intel_crtc *intel_crtc,
8796 struct intel_crtc_state *crtc_state,
8797 intel_clock_t *reduced_clock)
8799 struct drm_crtc *crtc = &intel_crtc->base;
8800 struct drm_device *dev = crtc->dev;
8801 struct drm_i915_private *dev_priv = dev->dev_private;
8802 struct drm_atomic_state *state = crtc_state->base.state;
8803 struct drm_connector *connector;
8804 struct drm_connector_state *connector_state;
8805 struct intel_encoder *encoder;
8808 bool is_lvds = false, is_sdvo = false;
8810 for_each_connector_in_state(state, connector, connector_state, i) {
8811 if (connector_state->crtc != crtc_state->base.crtc)
8814 encoder = to_intel_encoder(connector_state->best_encoder);
8816 switch (encoder->type) {
8817 case INTEL_OUTPUT_LVDS:
8820 case INTEL_OUTPUT_SDVO:
8821 case INTEL_OUTPUT_HDMI:
8829 /* Enable autotuning of the PLL clock (if permissible) */
8832 if ((intel_panel_use_ssc(dev_priv) &&
8833 dev_priv->vbt.lvds_ssc_freq == 100000) ||
8834 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
8836 } else if (crtc_state->sdvo_tv_clock)
8839 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
8841 if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
8844 if (reduced_clock) {
8845 fp2 = i9xx_dpll_compute_fp(reduced_clock);
8847 if (reduced_clock->m < factor * reduced_clock->n)
8856 dpll |= DPLLB_MODE_LVDS;
8858 dpll |= DPLLB_MODE_DAC_SERIAL;
8860 dpll |= (crtc_state->pixel_multiplier - 1)
8861 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
8864 dpll |= DPLL_SDVO_HIGH_SPEED;
8865 if (crtc_state->has_dp_encoder)
8866 dpll |= DPLL_SDVO_HIGH_SPEED;
8868 /* compute bitmask from p1 value */
8869 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8871 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
8873 switch (crtc_state->dpll.p2) {
8875 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
8878 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
8881 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
8884 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
8888 if (is_lvds && intel_panel_use_ssc(dev_priv))
8889 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
8891 dpll |= PLL_REF_INPUT_DREFCLK;
8893 dpll |= DPLL_VCO_ENABLE;
8895 crtc_state->dpll_hw_state.dpll = dpll;
8896 crtc_state->dpll_hw_state.fp0 = fp;
8897 crtc_state->dpll_hw_state.fp1 = fp2;
8900 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
8901 struct intel_crtc_state *crtc_state)
8903 struct drm_device *dev = crtc->base.dev;
8904 struct drm_i915_private *dev_priv = dev->dev_private;
8905 intel_clock_t reduced_clock;
8906 bool has_reduced_clock = false;
8907 struct intel_shared_dpll *pll;
8908 const intel_limit_t *limit;
8909 int refclk = 120000;
8911 memset(&crtc_state->dpll_hw_state, 0,
8912 sizeof(crtc_state->dpll_hw_state));
8914 crtc->lowfreq_avail = false;
8916 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
8917 if (!crtc_state->has_pch_encoder)
8920 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8921 if (intel_panel_use_ssc(dev_priv)) {
8922 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
8923 dev_priv->vbt.lvds_ssc_freq);
8924 refclk = dev_priv->vbt.lvds_ssc_freq;
8927 if (intel_is_dual_link_lvds(dev)) {
8928 if (refclk == 100000)
8929 limit = &intel_limits_ironlake_dual_lvds_100m;
8931 limit = &intel_limits_ironlake_dual_lvds;
8933 if (refclk == 100000)
8934 limit = &intel_limits_ironlake_single_lvds_100m;
8936 limit = &intel_limits_ironlake_single_lvds;
8939 limit = &intel_limits_ironlake_dac;
8942 if (!crtc_state->clock_set &&
8943 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8944 refclk, NULL, &crtc_state->dpll)) {
8945 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8949 ironlake_compute_dpll(crtc, crtc_state,
8950 has_reduced_clock ? &reduced_clock : NULL);
8952 pll = intel_get_shared_dpll(crtc, crtc_state, NULL);
8954 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
8955 pipe_name(crtc->pipe));
8959 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
8961 crtc->lowfreq_avail = true;
8966 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
8967 struct intel_link_m_n *m_n)
8969 struct drm_device *dev = crtc->base.dev;
8970 struct drm_i915_private *dev_priv = dev->dev_private;
8971 enum pipe pipe = crtc->pipe;
8973 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
8974 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
8975 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
8977 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
8978 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
8979 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8982 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
8983 enum transcoder transcoder,
8984 struct intel_link_m_n *m_n,
8985 struct intel_link_m_n *m2_n2)
8987 struct drm_device *dev = crtc->base.dev;
8988 struct drm_i915_private *dev_priv = dev->dev_private;
8989 enum pipe pipe = crtc->pipe;
8991 if (INTEL_INFO(dev)->gen >= 5) {
8992 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
8993 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
8994 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
8996 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
8997 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
8998 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8999 /* Read M2_N2 registers only for gen < 8 (M2_N2 available for
9000 * gen < 8) and if DRRS is supported (to make sure the
9001 * registers are not unnecessarily read).
9003 if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
9004 crtc->config->has_drrs) {
9005 m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
9006 m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
9007 m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
9009 m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
9010 m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
9011 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9014 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
9015 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
9016 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
9018 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
9019 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
9020 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9024 void intel_dp_get_m_n(struct intel_crtc *crtc,
9025 struct intel_crtc_state *pipe_config)
9027 if (pipe_config->has_pch_encoder)
9028 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
9030 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9031 &pipe_config->dp_m_n,
9032 &pipe_config->dp_m2_n2);
9035 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
9036 struct intel_crtc_state *pipe_config)
9038 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9039 &pipe_config->fdi_m_n, NULL);
9042 static void skylake_get_pfit_config(struct intel_crtc *crtc,
9043 struct intel_crtc_state *pipe_config)
9045 struct drm_device *dev = crtc->base.dev;
9046 struct drm_i915_private *dev_priv = dev->dev_private;
9047 struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
9048 uint32_t ps_ctrl = 0;
9052 /* find scaler attached to this pipe */
9053 for (i = 0; i < crtc->num_scalers; i++) {
9054 ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
9055 if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
9057 pipe_config->pch_pfit.enabled = true;
9058 pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
9059 pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
9064 scaler_state->scaler_id = id;
9066 scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
9068 scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
9073 skylake_get_initial_plane_config(struct intel_crtc *crtc,
9074 struct intel_initial_plane_config *plane_config)
9076 struct drm_device *dev = crtc->base.dev;
9077 struct drm_i915_private *dev_priv = dev->dev_private;
9078 u32 val, base, offset, stride_mult, tiling;
9079 int pipe = crtc->pipe;
9080 int fourcc, pixel_format;
9081 unsigned int aligned_height;
9082 struct drm_framebuffer *fb;
9083 struct intel_framebuffer *intel_fb;
9085 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9087 DRM_DEBUG_KMS("failed to alloc fb\n");
9091 fb = &intel_fb->base;
9093 val = I915_READ(PLANE_CTL(pipe, 0));
9094 if (!(val & PLANE_CTL_ENABLE))
9097 pixel_format = val & PLANE_CTL_FORMAT_MASK;
9098 fourcc = skl_format_to_fourcc(pixel_format,
9099 val & PLANE_CTL_ORDER_RGBX,
9100 val & PLANE_CTL_ALPHA_MASK);
9101 fb->pixel_format = fourcc;
9102 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9104 tiling = val & PLANE_CTL_TILED_MASK;
9106 case PLANE_CTL_TILED_LINEAR:
9107 fb->modifier[0] = DRM_FORMAT_MOD_NONE;
9109 case PLANE_CTL_TILED_X:
9110 plane_config->tiling = I915_TILING_X;
9111 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9113 case PLANE_CTL_TILED_Y:
9114 fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
9116 case PLANE_CTL_TILED_YF:
9117 fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
9120 MISSING_CASE(tiling);
9124 base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
9125 plane_config->base = base;
9127 offset = I915_READ(PLANE_OFFSET(pipe, 0));
9129 val = I915_READ(PLANE_SIZE(pipe, 0));
9130 fb->height = ((val >> 16) & 0xfff) + 1;
9131 fb->width = ((val >> 0) & 0x1fff) + 1;
9133 val = I915_READ(PLANE_STRIDE(pipe, 0));
9134 stride_mult = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
9136 fb->pitches[0] = (val & 0x3ff) * stride_mult;
9138 aligned_height = intel_fb_align_height(dev, fb->height,
9142 plane_config->size = fb->pitches[0] * aligned_height;
9144 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9145 pipe_name(pipe), fb->width, fb->height,
9146 fb->bits_per_pixel, base, fb->pitches[0],
9147 plane_config->size);
9149 plane_config->fb = intel_fb;
9156 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
9157 struct intel_crtc_state *pipe_config)
9159 struct drm_device *dev = crtc->base.dev;
9160 struct drm_i915_private *dev_priv = dev->dev_private;
9163 tmp = I915_READ(PF_CTL(crtc->pipe));
9165 if (tmp & PF_ENABLE) {
9166 pipe_config->pch_pfit.enabled = true;
9167 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
9168 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
9170 /* We currently do not free assignements of panel fitters on
9171 * ivb/hsw (since we don't use the higher upscaling modes which
9172 * differentiates them) so just WARN about this case for now. */
9174 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
9175 PF_PIPE_SEL_IVB(crtc->pipe));
9181 ironlake_get_initial_plane_config(struct intel_crtc *crtc,
9182 struct intel_initial_plane_config *plane_config)
9184 struct drm_device *dev = crtc->base.dev;
9185 struct drm_i915_private *dev_priv = dev->dev_private;
9186 u32 val, base, offset;
9187 int pipe = crtc->pipe;
9188 int fourcc, pixel_format;
9189 unsigned int aligned_height;
9190 struct drm_framebuffer *fb;
9191 struct intel_framebuffer *intel_fb;
9193 val = I915_READ(DSPCNTR(pipe));
9194 if (!(val & DISPLAY_PLANE_ENABLE))
9197 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9199 DRM_DEBUG_KMS("failed to alloc fb\n");
9203 fb = &intel_fb->base;
9205 if (INTEL_INFO(dev)->gen >= 4) {
9206 if (val & DISPPLANE_TILED) {
9207 plane_config->tiling = I915_TILING_X;
9208 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9212 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
9213 fourcc = i9xx_format_to_fourcc(pixel_format);
9214 fb->pixel_format = fourcc;
9215 fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9217 base = I915_READ(DSPSURF(pipe)) & 0xfffff000;
9218 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
9219 offset = I915_READ(DSPOFFSET(pipe));
9221 if (plane_config->tiling)
9222 offset = I915_READ(DSPTILEOFF(pipe));
9224 offset = I915_READ(DSPLINOFF(pipe));
9226 plane_config->base = base;
9228 val = I915_READ(PIPESRC(pipe));
9229 fb->width = ((val >> 16) & 0xfff) + 1;
9230 fb->height = ((val >> 0) & 0xfff) + 1;
9232 val = I915_READ(DSPSTRIDE(pipe));
9233 fb->pitches[0] = val & 0xffffffc0;
9235 aligned_height = intel_fb_align_height(dev, fb->height,
9239 plane_config->size = fb->pitches[0] * aligned_height;
9241 DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9242 pipe_name(pipe), fb->width, fb->height,
9243 fb->bits_per_pixel, base, fb->pitches[0],
9244 plane_config->size);
9246 plane_config->fb = intel_fb;
9249 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
9250 struct intel_crtc_state *pipe_config)
9252 struct drm_device *dev = crtc->base.dev;
9253 struct drm_i915_private *dev_priv = dev->dev_private;
9254 enum intel_display_power_domain power_domain;
9258 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
9259 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9262 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9263 pipe_config->shared_dpll = NULL;
9266 tmp = I915_READ(PIPECONF(crtc->pipe));
9267 if (!(tmp & PIPECONF_ENABLE))
9270 switch (tmp & PIPECONF_BPC_MASK) {
9272 pipe_config->pipe_bpp = 18;
9275 pipe_config->pipe_bpp = 24;
9277 case PIPECONF_10BPC:
9278 pipe_config->pipe_bpp = 30;
9280 case PIPECONF_12BPC:
9281 pipe_config->pipe_bpp = 36;
9287 if (tmp & PIPECONF_COLOR_RANGE_SELECT)
9288 pipe_config->limited_color_range = true;
9290 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
9291 struct intel_shared_dpll *pll;
9292 enum intel_dpll_id pll_id;
9294 pipe_config->has_pch_encoder = true;
9296 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
9297 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9298 FDI_DP_PORT_WIDTH_SHIFT) + 1;
9300 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9302 if (HAS_PCH_IBX(dev_priv)) {
9303 pll_id = (enum intel_dpll_id) crtc->pipe;
9305 tmp = I915_READ(PCH_DPLL_SEL);
9306 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
9307 pll_id = DPLL_ID_PCH_PLL_B;
9309 pll_id= DPLL_ID_PCH_PLL_A;
9312 pipe_config->shared_dpll =
9313 intel_get_shared_dpll_by_id(dev_priv, pll_id);
9314 pll = pipe_config->shared_dpll;
9316 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
9317 &pipe_config->dpll_hw_state));
9319 tmp = pipe_config->dpll_hw_state.dpll;
9320 pipe_config->pixel_multiplier =
9321 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
9322 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
9324 ironlake_pch_clock_get(crtc, pipe_config);
9326 pipe_config->pixel_multiplier = 1;
9329 intel_get_pipe_timings(crtc, pipe_config);
9330 intel_get_pipe_src_size(crtc, pipe_config);
9332 ironlake_get_pfit_config(crtc, pipe_config);
9337 intel_display_power_put(dev_priv, power_domain);
9342 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
9344 struct drm_device *dev = dev_priv->dev;
9345 struct intel_crtc *crtc;
9347 for_each_intel_crtc(dev, crtc)
9348 I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
9349 pipe_name(crtc->pipe));
9351 I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
9352 I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
9353 I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
9354 I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
9355 I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
9356 I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
9357 "CPU PWM1 enabled\n");
9358 if (IS_HASWELL(dev))
9359 I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
9360 "CPU PWM2 enabled\n");
9361 I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
9362 "PCH PWM1 enabled\n");
9363 I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
9364 "Utility pin enabled\n");
9365 I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
9368 * In theory we can still leave IRQs enabled, as long as only the HPD
9369 * interrupts remain enabled. We used to check for that, but since it's
9370 * gen-specific and since we only disable LCPLL after we fully disable
9371 * the interrupts, the check below should be enough.
9373 I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
9376 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
9378 struct drm_device *dev = dev_priv->dev;
9380 if (IS_HASWELL(dev))
9381 return I915_READ(D_COMP_HSW);
9383 return I915_READ(D_COMP_BDW);
9386 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
9388 struct drm_device *dev = dev_priv->dev;
9390 if (IS_HASWELL(dev)) {
9391 mutex_lock(&dev_priv->rps.hw_lock);
9392 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
9394 DRM_ERROR("Failed to write to D_COMP\n");
9395 mutex_unlock(&dev_priv->rps.hw_lock);
9397 I915_WRITE(D_COMP_BDW, val);
9398 POSTING_READ(D_COMP_BDW);
9403 * This function implements pieces of two sequences from BSpec:
9404 * - Sequence for display software to disable LCPLL
9405 * - Sequence for display software to allow package C8+
9406 * The steps implemented here are just the steps that actually touch the LCPLL
9407 * register. Callers should take care of disabling all the display engine
9408 * functions, doing the mode unset, fixing interrupts, etc.
9410 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
9411 bool switch_to_fclk, bool allow_power_down)
9415 assert_can_disable_lcpll(dev_priv);
9417 val = I915_READ(LCPLL_CTL);
9419 if (switch_to_fclk) {
9420 val |= LCPLL_CD_SOURCE_FCLK;
9421 I915_WRITE(LCPLL_CTL, val);
9423 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
9424 LCPLL_CD_SOURCE_FCLK_DONE, 1))
9425 DRM_ERROR("Switching to FCLK failed\n");
9427 val = I915_READ(LCPLL_CTL);
9430 val |= LCPLL_PLL_DISABLE;
9431 I915_WRITE(LCPLL_CTL, val);
9432 POSTING_READ(LCPLL_CTL);
9434 if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
9435 DRM_ERROR("LCPLL still locked\n");
9437 val = hsw_read_dcomp(dev_priv);
9438 val |= D_COMP_COMP_DISABLE;
9439 hsw_write_dcomp(dev_priv, val);
9442 if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
9444 DRM_ERROR("D_COMP RCOMP still in progress\n");
9446 if (allow_power_down) {
9447 val = I915_READ(LCPLL_CTL);
9448 val |= LCPLL_POWER_DOWN_ALLOW;
9449 I915_WRITE(LCPLL_CTL, val);
9450 POSTING_READ(LCPLL_CTL);
9455 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
9458 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
9462 val = I915_READ(LCPLL_CTL);
9464 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
9465 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
9469 * Make sure we're not on PC8 state before disabling PC8, otherwise
9470 * we'll hang the machine. To prevent PC8 state, just enable force_wake.
9472 intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
9474 if (val & LCPLL_POWER_DOWN_ALLOW) {
9475 val &= ~LCPLL_POWER_DOWN_ALLOW;
9476 I915_WRITE(LCPLL_CTL, val);
9477 POSTING_READ(LCPLL_CTL);
9480 val = hsw_read_dcomp(dev_priv);
9481 val |= D_COMP_COMP_FORCE;
9482 val &= ~D_COMP_COMP_DISABLE;
9483 hsw_write_dcomp(dev_priv, val);
9485 val = I915_READ(LCPLL_CTL);
9486 val &= ~LCPLL_PLL_DISABLE;
9487 I915_WRITE(LCPLL_CTL, val);
9489 if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
9490 DRM_ERROR("LCPLL not locked yet\n");
9492 if (val & LCPLL_CD_SOURCE_FCLK) {
9493 val = I915_READ(LCPLL_CTL);
9494 val &= ~LCPLL_CD_SOURCE_FCLK;
9495 I915_WRITE(LCPLL_CTL, val);
9497 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
9498 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9499 DRM_ERROR("Switching back to LCPLL failed\n");
9502 intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
9503 intel_update_cdclk(dev_priv->dev);
9507 * Package states C8 and deeper are really deep PC states that can only be
9508 * reached when all the devices on the system allow it, so even if the graphics
9509 * device allows PC8+, it doesn't mean the system will actually get to these
9510 * states. Our driver only allows PC8+ when going into runtime PM.
9512 * The requirements for PC8+ are that all the outputs are disabled, the power
9513 * well is disabled and most interrupts are disabled, and these are also
9514 * requirements for runtime PM. When these conditions are met, we manually do
9515 * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
9516 * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
9519 * When we really reach PC8 or deeper states (not just when we allow it) we lose
9520 * the state of some registers, so when we come back from PC8+ we need to
9521 * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
9522 * need to take care of the registers kept by RC6. Notice that this happens even
9523 * if we don't put the device in PCI D3 state (which is what currently happens
9524 * because of the runtime PM support).
9526 * For more, read "Display Sequences for Package C8" on the hardware
9529 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
9531 struct drm_device *dev = dev_priv->dev;
9534 DRM_DEBUG_KMS("Enabling package C8+\n");
9536 if (HAS_PCH_LPT_LP(dev)) {
9537 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9538 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
9539 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9542 lpt_disable_clkout_dp(dev);
9543 hsw_disable_lcpll(dev_priv, true, true);
9546 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
9548 struct drm_device *dev = dev_priv->dev;
9551 DRM_DEBUG_KMS("Disabling package C8+\n");
9553 hsw_restore_lcpll(dev_priv);
9554 lpt_init_pch_refclk(dev);
9556 if (HAS_PCH_LPT_LP(dev)) {
9557 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9558 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
9559 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9563 static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9565 struct drm_device *dev = old_state->dev;
9566 struct intel_atomic_state *old_intel_state =
9567 to_intel_atomic_state(old_state);
9568 unsigned int req_cdclk = old_intel_state->dev_cdclk;
9570 broxton_set_cdclk(to_i915(dev), req_cdclk);
9573 /* compute the max rate for new configuration */
9574 static int ilk_max_pixel_rate(struct drm_atomic_state *state)
9576 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9577 struct drm_i915_private *dev_priv = state->dev->dev_private;
9578 struct drm_crtc *crtc;
9579 struct drm_crtc_state *cstate;
9580 struct intel_crtc_state *crtc_state;
9581 unsigned max_pixel_rate = 0, i;
9584 memcpy(intel_state->min_pixclk, dev_priv->min_pixclk,
9585 sizeof(intel_state->min_pixclk));
9587 for_each_crtc_in_state(state, crtc, cstate, i) {
9590 crtc_state = to_intel_crtc_state(cstate);
9591 if (!crtc_state->base.enable) {
9592 intel_state->min_pixclk[i] = 0;
9596 pixel_rate = ilk_pipe_pixel_rate(crtc_state);
9598 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
9599 if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
9600 pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
9602 intel_state->min_pixclk[i] = pixel_rate;
9605 for_each_pipe(dev_priv, pipe)
9606 max_pixel_rate = max(intel_state->min_pixclk[pipe], max_pixel_rate);
9608 return max_pixel_rate;
9611 static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
9613 struct drm_i915_private *dev_priv = dev->dev_private;
9617 if (WARN((I915_READ(LCPLL_CTL) &
9618 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
9619 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
9620 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
9621 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
9622 "trying to change cdclk frequency with cdclk not enabled\n"))
9625 mutex_lock(&dev_priv->rps.hw_lock);
9626 ret = sandybridge_pcode_write(dev_priv,
9627 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
9628 mutex_unlock(&dev_priv->rps.hw_lock);
9630 DRM_ERROR("failed to inform pcode about cdclk change\n");
9634 val = I915_READ(LCPLL_CTL);
9635 val |= LCPLL_CD_SOURCE_FCLK;
9636 I915_WRITE(LCPLL_CTL, val);
9638 if (wait_for_us(I915_READ(LCPLL_CTL) &
9639 LCPLL_CD_SOURCE_FCLK_DONE, 1))
9640 DRM_ERROR("Switching to FCLK failed\n");
9642 val = I915_READ(LCPLL_CTL);
9643 val &= ~LCPLL_CLK_FREQ_MASK;
9647 val |= LCPLL_CLK_FREQ_450;
9651 val |= LCPLL_CLK_FREQ_54O_BDW;
9655 val |= LCPLL_CLK_FREQ_337_5_BDW;
9659 val |= LCPLL_CLK_FREQ_675_BDW;
9663 WARN(1, "invalid cdclk frequency\n");
9667 I915_WRITE(LCPLL_CTL, val);
9669 val = I915_READ(LCPLL_CTL);
9670 val &= ~LCPLL_CD_SOURCE_FCLK;
9671 I915_WRITE(LCPLL_CTL, val);
9673 if (wait_for_us((I915_READ(LCPLL_CTL) &
9674 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9675 DRM_ERROR("Switching back to LCPLL failed\n");
9677 mutex_lock(&dev_priv->rps.hw_lock);
9678 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
9679 mutex_unlock(&dev_priv->rps.hw_lock);
9681 I915_WRITE(CDCLK_FREQ, DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
9683 intel_update_cdclk(dev);
9685 WARN(cdclk != dev_priv->cdclk_freq,
9686 "cdclk requested %d kHz but got %d kHz\n",
9687 cdclk, dev_priv->cdclk_freq);
9690 static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
9692 struct drm_i915_private *dev_priv = to_i915(state->dev);
9693 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
9694 int max_pixclk = ilk_max_pixel_rate(state);
9698 * FIXME should also account for plane ratio
9699 * once 64bpp pixel formats are supported.
9701 if (max_pixclk > 540000)
9703 else if (max_pixclk > 450000)
9705 else if (max_pixclk > 337500)
9710 if (cdclk > dev_priv->max_cdclk_freq) {
9711 DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
9712 cdclk, dev_priv->max_cdclk_freq);
9716 intel_state->cdclk = intel_state->dev_cdclk = cdclk;
9717 if (!intel_state->active_crtcs)
9718 intel_state->dev_cdclk = 337500;
9723 static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9725 struct drm_device *dev = old_state->dev;
9726 struct intel_atomic_state *old_intel_state =
9727 to_intel_atomic_state(old_state);
9728 unsigned req_cdclk = old_intel_state->dev_cdclk;
9730 broadwell_set_cdclk(dev, req_cdclk);
9733 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
9734 struct intel_crtc_state *crtc_state)
9736 struct intel_encoder *intel_encoder =
9737 intel_ddi_get_crtc_new_encoder(crtc_state);
9739 if (intel_encoder->type != INTEL_OUTPUT_DSI) {
9740 if (!intel_ddi_pll_select(crtc, crtc_state))
9744 crtc->lowfreq_avail = false;
9749 static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
9751 struct intel_crtc_state *pipe_config)
9753 enum intel_dpll_id id;
9757 pipe_config->ddi_pll_sel = SKL_DPLL0;
9758 id = DPLL_ID_SKL_DPLL0;
9761 pipe_config->ddi_pll_sel = SKL_DPLL1;
9762 id = DPLL_ID_SKL_DPLL1;
9765 pipe_config->ddi_pll_sel = SKL_DPLL2;
9766 id = DPLL_ID_SKL_DPLL2;
9769 DRM_ERROR("Incorrect port type\n");
9773 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9776 static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
9778 struct intel_crtc_state *pipe_config)
9780 enum intel_dpll_id id;
9783 temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
9784 pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
9786 switch (pipe_config->ddi_pll_sel) {
9788 id = DPLL_ID_SKL_DPLL0;
9791 id = DPLL_ID_SKL_DPLL1;
9794 id = DPLL_ID_SKL_DPLL2;
9797 id = DPLL_ID_SKL_DPLL3;
9800 MISSING_CASE(pipe_config->ddi_pll_sel);
9804 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9807 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
9809 struct intel_crtc_state *pipe_config)
9811 enum intel_dpll_id id;
9813 pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
9815 switch (pipe_config->ddi_pll_sel) {
9816 case PORT_CLK_SEL_WRPLL1:
9817 id = DPLL_ID_WRPLL1;
9819 case PORT_CLK_SEL_WRPLL2:
9820 id = DPLL_ID_WRPLL2;
9822 case PORT_CLK_SEL_SPLL:
9825 case PORT_CLK_SEL_LCPLL_810:
9826 id = DPLL_ID_LCPLL_810;
9828 case PORT_CLK_SEL_LCPLL_1350:
9829 id = DPLL_ID_LCPLL_1350;
9831 case PORT_CLK_SEL_LCPLL_2700:
9832 id = DPLL_ID_LCPLL_2700;
9835 MISSING_CASE(pipe_config->ddi_pll_sel);
9837 case PORT_CLK_SEL_NONE:
9841 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
9844 static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
9845 struct intel_crtc_state *pipe_config,
9846 unsigned long *power_domain_mask)
9848 struct drm_device *dev = crtc->base.dev;
9849 struct drm_i915_private *dev_priv = dev->dev_private;
9850 enum intel_display_power_domain power_domain;
9853 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9856 * XXX: Do intel_display_power_get_if_enabled before reading this (for
9857 * consistency and less surprising code; it's in always on power).
9859 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
9860 if (tmp & TRANS_DDI_FUNC_ENABLE) {
9861 enum pipe trans_edp_pipe;
9862 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
9864 WARN(1, "unknown pipe linked to edp transcoder\n");
9865 case TRANS_DDI_EDP_INPUT_A_ONOFF:
9866 case TRANS_DDI_EDP_INPUT_A_ON:
9867 trans_edp_pipe = PIPE_A;
9869 case TRANS_DDI_EDP_INPUT_B_ONOFF:
9870 trans_edp_pipe = PIPE_B;
9872 case TRANS_DDI_EDP_INPUT_C_ONOFF:
9873 trans_edp_pipe = PIPE_C;
9877 if (trans_edp_pipe == crtc->pipe)
9878 pipe_config->cpu_transcoder = TRANSCODER_EDP;
9881 power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
9882 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9884 *power_domain_mask |= BIT(power_domain);
9886 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
9888 return tmp & PIPECONF_ENABLE;
9891 static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
9892 struct intel_crtc_state *pipe_config,
9893 unsigned long *power_domain_mask)
9895 struct drm_device *dev = crtc->base.dev;
9896 struct drm_i915_private *dev_priv = dev->dev_private;
9897 enum intel_display_power_domain power_domain;
9899 enum transcoder cpu_transcoder;
9902 pipe_config->has_dsi_encoder = false;
9904 for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
9906 cpu_transcoder = TRANSCODER_DSI_A;
9908 cpu_transcoder = TRANSCODER_DSI_C;
9910 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
9911 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9913 *power_domain_mask |= BIT(power_domain);
9916 * The PLL needs to be enabled with a valid divider
9917 * configuration, otherwise accessing DSI registers will hang
9918 * the machine. See BSpec North Display Engine
9919 * registers/MIPI[BXT]. We can break out here early, since we
9920 * need the same DSI PLL to be enabled for both DSI ports.
9922 if (!intel_dsi_pll_is_enabled(dev_priv))
9925 /* XXX: this works for video mode only */
9926 tmp = I915_READ(BXT_MIPI_PORT_CTRL(port));
9927 if (!(tmp & DPI_ENABLE))
9930 tmp = I915_READ(MIPI_CTRL(port));
9931 if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
9934 pipe_config->cpu_transcoder = cpu_transcoder;
9935 pipe_config->has_dsi_encoder = true;
9939 return pipe_config->has_dsi_encoder;
9942 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
9943 struct intel_crtc_state *pipe_config)
9945 struct drm_device *dev = crtc->base.dev;
9946 struct drm_i915_private *dev_priv = dev->dev_private;
9947 struct intel_shared_dpll *pll;
9951 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
9953 port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
9955 if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
9956 skylake_get_ddi_pll(dev_priv, port, pipe_config);
9957 else if (IS_BROXTON(dev))
9958 bxt_get_ddi_pll(dev_priv, port, pipe_config);
9960 haswell_get_ddi_pll(dev_priv, port, pipe_config);
9962 pll = pipe_config->shared_dpll;
9964 WARN_ON(!pll->funcs.get_hw_state(dev_priv, pll,
9965 &pipe_config->dpll_hw_state));
9969 * Haswell has only FDI/PCH transcoder A. It is which is connected to
9970 * DDI E. So just check whether this pipe is wired to DDI E and whether
9971 * the PCH transcoder is on.
9973 if (INTEL_INFO(dev)->gen < 9 &&
9974 (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
9975 pipe_config->has_pch_encoder = true;
9977 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
9978 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9979 FDI_DP_PORT_WIDTH_SHIFT) + 1;
9981 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9985 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
9986 struct intel_crtc_state *pipe_config)
9988 struct drm_device *dev = crtc->base.dev;
9989 struct drm_i915_private *dev_priv = dev->dev_private;
9990 enum intel_display_power_domain power_domain;
9991 unsigned long power_domain_mask;
9994 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
9995 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
9997 power_domain_mask = BIT(power_domain);
9999 pipe_config->shared_dpll = NULL;
10001 active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_mask);
10003 if (IS_BROXTON(dev_priv)) {
10004 bxt_get_dsi_transcoder_state(crtc, pipe_config,
10005 &power_domain_mask);
10006 WARN_ON(active && pipe_config->has_dsi_encoder);
10007 if (pipe_config->has_dsi_encoder)
10014 if (!pipe_config->has_dsi_encoder) {
10015 haswell_get_ddi_port_state(crtc, pipe_config);
10016 intel_get_pipe_timings(crtc, pipe_config);
10019 intel_get_pipe_src_size(crtc, pipe_config);
10021 pipe_config->gamma_mode =
10022 I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
10024 if (INTEL_INFO(dev)->gen >= 9) {
10025 skl_init_scalers(dev, crtc, pipe_config);
10028 if (INTEL_INFO(dev)->gen >= 9) {
10029 pipe_config->scaler_state.scaler_id = -1;
10030 pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
10033 power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
10034 if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
10035 power_domain_mask |= BIT(power_domain);
10036 if (INTEL_INFO(dev)->gen >= 9)
10037 skylake_get_pfit_config(crtc, pipe_config);
10039 ironlake_get_pfit_config(crtc, pipe_config);
10042 if (IS_HASWELL(dev))
10043 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
10044 (I915_READ(IPS_CTL) & IPS_ENABLE);
10046 if (pipe_config->cpu_transcoder != TRANSCODER_EDP &&
10047 !transcoder_is_dsi(pipe_config->cpu_transcoder)) {
10048 pipe_config->pixel_multiplier =
10049 I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
10051 pipe_config->pixel_multiplier = 1;
10055 for_each_power_domain(power_domain, power_domain_mask)
10056 intel_display_power_put(dev_priv, power_domain);
10061 static void i845_update_cursor(struct drm_crtc *crtc, u32 base,
10062 const struct intel_plane_state *plane_state)
10064 struct drm_device *dev = crtc->dev;
10065 struct drm_i915_private *dev_priv = dev->dev_private;
10066 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10067 uint32_t cntl = 0, size = 0;
10069 if (plane_state && plane_state->visible) {
10070 unsigned int width = plane_state->base.crtc_w;
10071 unsigned int height = plane_state->base.crtc_h;
10072 unsigned int stride = roundup_pow_of_two(width) * 4;
10076 WARN_ONCE(1, "Invalid cursor width/stride, width=%u, stride=%u\n",
10087 cntl |= CURSOR_ENABLE |
10088 CURSOR_GAMMA_ENABLE |
10089 CURSOR_FORMAT_ARGB |
10090 CURSOR_STRIDE(stride);
10092 size = (height << 12) | width;
10095 if (intel_crtc->cursor_cntl != 0 &&
10096 (intel_crtc->cursor_base != base ||
10097 intel_crtc->cursor_size != size ||
10098 intel_crtc->cursor_cntl != cntl)) {
10099 /* On these chipsets we can only modify the base/size/stride
10100 * whilst the cursor is disabled.
10102 I915_WRITE(CURCNTR(PIPE_A), 0);
10103 POSTING_READ(CURCNTR(PIPE_A));
10104 intel_crtc->cursor_cntl = 0;
10107 if (intel_crtc->cursor_base != base) {
10108 I915_WRITE(CURBASE(PIPE_A), base);
10109 intel_crtc->cursor_base = base;
10112 if (intel_crtc->cursor_size != size) {
10113 I915_WRITE(CURSIZE, size);
10114 intel_crtc->cursor_size = size;
10117 if (intel_crtc->cursor_cntl != cntl) {
10118 I915_WRITE(CURCNTR(PIPE_A), cntl);
10119 POSTING_READ(CURCNTR(PIPE_A));
10120 intel_crtc->cursor_cntl = cntl;
10124 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base,
10125 const struct intel_plane_state *plane_state)
10127 struct drm_device *dev = crtc->dev;
10128 struct drm_i915_private *dev_priv = dev->dev_private;
10129 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10130 int pipe = intel_crtc->pipe;
10133 if (plane_state && plane_state->visible) {
10134 cntl = MCURSOR_GAMMA_ENABLE;
10135 switch (plane_state->base.crtc_w) {
10137 cntl |= CURSOR_MODE_64_ARGB_AX;
10140 cntl |= CURSOR_MODE_128_ARGB_AX;
10143 cntl |= CURSOR_MODE_256_ARGB_AX;
10146 MISSING_CASE(plane_state->base.crtc_w);
10149 cntl |= pipe << 28; /* Connect to correct pipe */
10152 cntl |= CURSOR_PIPE_CSC_ENABLE;
10154 if (plane_state->base.rotation == BIT(DRM_ROTATE_180))
10155 cntl |= CURSOR_ROTATE_180;
10158 if (intel_crtc->cursor_cntl != cntl) {
10159 I915_WRITE(CURCNTR(pipe), cntl);
10160 POSTING_READ(CURCNTR(pipe));
10161 intel_crtc->cursor_cntl = cntl;
10164 /* and commit changes on next vblank */
10165 I915_WRITE(CURBASE(pipe), base);
10166 POSTING_READ(CURBASE(pipe));
10168 intel_crtc->cursor_base = base;
10171 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
10172 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
10173 const struct intel_plane_state *plane_state)
10175 struct drm_device *dev = crtc->dev;
10176 struct drm_i915_private *dev_priv = dev->dev_private;
10177 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10178 int pipe = intel_crtc->pipe;
10179 u32 base = intel_crtc->cursor_addr;
10183 int x = plane_state->base.crtc_x;
10184 int y = plane_state->base.crtc_y;
10187 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
10190 pos |= x << CURSOR_X_SHIFT;
10193 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
10196 pos |= y << CURSOR_Y_SHIFT;
10198 /* ILK+ do this automagically */
10199 if (HAS_GMCH_DISPLAY(dev) &&
10200 plane_state->base.rotation == BIT(DRM_ROTATE_180)) {
10201 base += (plane_state->base.crtc_h *
10202 plane_state->base.crtc_w - 1) * 4;
10206 I915_WRITE(CURPOS(pipe), pos);
10208 if (IS_845G(dev) || IS_I865G(dev))
10209 i845_update_cursor(crtc, base, plane_state);
10211 i9xx_update_cursor(crtc, base, plane_state);
10214 static bool cursor_size_ok(struct drm_device *dev,
10215 uint32_t width, uint32_t height)
10217 if (width == 0 || height == 0)
10221 * 845g/865g are special in that they are only limited by
10222 * the width of their cursors, the height is arbitrary up to
10223 * the precision of the register. Everything else requires
10224 * square cursors, limited to a few power-of-two sizes.
10226 if (IS_845G(dev) || IS_I865G(dev)) {
10227 if ((width & 63) != 0)
10230 if (width > (IS_845G(dev) ? 64 : 512))
10236 switch (width | height) {
10251 /* VESA 640x480x72Hz mode to set on the pipe */
10252 static struct drm_display_mode load_detect_mode = {
10253 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
10254 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
10257 struct drm_framebuffer *
10258 __intel_framebuffer_create(struct drm_device *dev,
10259 struct drm_mode_fb_cmd2 *mode_cmd,
10260 struct drm_i915_gem_object *obj)
10262 struct intel_framebuffer *intel_fb;
10265 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
10267 return ERR_PTR(-ENOMEM);
10269 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
10273 return &intel_fb->base;
10277 return ERR_PTR(ret);
10280 static struct drm_framebuffer *
10281 intel_framebuffer_create(struct drm_device *dev,
10282 struct drm_mode_fb_cmd2 *mode_cmd,
10283 struct drm_i915_gem_object *obj)
10285 struct drm_framebuffer *fb;
10288 ret = i915_mutex_lock_interruptible(dev);
10290 return ERR_PTR(ret);
10291 fb = __intel_framebuffer_create(dev, mode_cmd, obj);
10292 mutex_unlock(&dev->struct_mutex);
10298 intel_framebuffer_pitch_for_width(int width, int bpp)
10300 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
10301 return ALIGN(pitch, 64);
10305 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
10307 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
10308 return PAGE_ALIGN(pitch * mode->vdisplay);
10311 static struct drm_framebuffer *
10312 intel_framebuffer_create_for_mode(struct drm_device *dev,
10313 struct drm_display_mode *mode,
10314 int depth, int bpp)
10316 struct drm_framebuffer *fb;
10317 struct drm_i915_gem_object *obj;
10318 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
10320 obj = i915_gem_alloc_object(dev,
10321 intel_framebuffer_size_for_mode(mode, bpp));
10323 return ERR_PTR(-ENOMEM);
10325 mode_cmd.width = mode->hdisplay;
10326 mode_cmd.height = mode->vdisplay;
10327 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
10329 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
10331 fb = intel_framebuffer_create(dev, &mode_cmd, obj);
10333 drm_gem_object_unreference_unlocked(&obj->base);
10338 static struct drm_framebuffer *
10339 mode_fits_in_fbdev(struct drm_device *dev,
10340 struct drm_display_mode *mode)
10342 #ifdef CONFIG_DRM_FBDEV_EMULATION
10343 struct drm_i915_private *dev_priv = dev->dev_private;
10344 struct drm_i915_gem_object *obj;
10345 struct drm_framebuffer *fb;
10347 if (!dev_priv->fbdev)
10350 if (!dev_priv->fbdev->fb)
10353 obj = dev_priv->fbdev->fb->obj;
10356 fb = &dev_priv->fbdev->fb->base;
10357 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
10358 fb->bits_per_pixel))
10361 if (obj->base.size < mode->vdisplay * fb->pitches[0])
10364 drm_framebuffer_reference(fb);
10371 static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
10372 struct drm_crtc *crtc,
10373 struct drm_display_mode *mode,
10374 struct drm_framebuffer *fb,
10377 struct drm_plane_state *plane_state;
10378 int hdisplay, vdisplay;
10381 plane_state = drm_atomic_get_plane_state(state, crtc->primary);
10382 if (IS_ERR(plane_state))
10383 return PTR_ERR(plane_state);
10386 drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
10388 hdisplay = vdisplay = 0;
10390 ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
10393 drm_atomic_set_fb_for_plane(plane_state, fb);
10394 plane_state->crtc_x = 0;
10395 plane_state->crtc_y = 0;
10396 plane_state->crtc_w = hdisplay;
10397 plane_state->crtc_h = vdisplay;
10398 plane_state->src_x = x << 16;
10399 plane_state->src_y = y << 16;
10400 plane_state->src_w = hdisplay << 16;
10401 plane_state->src_h = vdisplay << 16;
10406 bool intel_get_load_detect_pipe(struct drm_connector *connector,
10407 struct drm_display_mode *mode,
10408 struct intel_load_detect_pipe *old,
10409 struct drm_modeset_acquire_ctx *ctx)
10411 struct intel_crtc *intel_crtc;
10412 struct intel_encoder *intel_encoder =
10413 intel_attached_encoder(connector);
10414 struct drm_crtc *possible_crtc;
10415 struct drm_encoder *encoder = &intel_encoder->base;
10416 struct drm_crtc *crtc = NULL;
10417 struct drm_device *dev = encoder->dev;
10418 struct drm_framebuffer *fb;
10419 struct drm_mode_config *config = &dev->mode_config;
10420 struct drm_atomic_state *state = NULL, *restore_state = NULL;
10421 struct drm_connector_state *connector_state;
10422 struct intel_crtc_state *crtc_state;
10425 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10426 connector->base.id, connector->name,
10427 encoder->base.id, encoder->name);
10429 old->restore_state = NULL;
10432 ret = drm_modeset_lock(&config->connection_mutex, ctx);
10437 * Algorithm gets a little messy:
10439 * - if the connector already has an assigned crtc, use it (but make
10440 * sure it's on first)
10442 * - try to find the first unused crtc that can drive this connector,
10443 * and use that if we find one
10446 /* See if we already have a CRTC for this connector */
10447 if (connector->state->crtc) {
10448 crtc = connector->state->crtc;
10450 ret = drm_modeset_lock(&crtc->mutex, ctx);
10454 /* Make sure the crtc and connector are running */
10458 /* Find an unused one (if possible) */
10459 for_each_crtc(dev, possible_crtc) {
10461 if (!(encoder->possible_crtcs & (1 << i)))
10464 ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
10468 if (possible_crtc->state->enable) {
10469 drm_modeset_unlock(&possible_crtc->mutex);
10473 crtc = possible_crtc;
10478 * If we didn't find an unused CRTC, don't use any.
10481 DRM_DEBUG_KMS("no pipe available for load-detect\n");
10486 intel_crtc = to_intel_crtc(crtc);
10488 ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
10492 state = drm_atomic_state_alloc(dev);
10493 restore_state = drm_atomic_state_alloc(dev);
10494 if (!state || !restore_state) {
10499 state->acquire_ctx = ctx;
10500 restore_state->acquire_ctx = ctx;
10502 connector_state = drm_atomic_get_connector_state(state, connector);
10503 if (IS_ERR(connector_state)) {
10504 ret = PTR_ERR(connector_state);
10508 ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
10512 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
10513 if (IS_ERR(crtc_state)) {
10514 ret = PTR_ERR(crtc_state);
10518 crtc_state->base.active = crtc_state->base.enable = true;
10521 mode = &load_detect_mode;
10523 /* We need a framebuffer large enough to accommodate all accesses
10524 * that the plane may generate whilst we perform load detection.
10525 * We can not rely on the fbcon either being present (we get called
10526 * during its initialisation to detect all boot displays, or it may
10527 * not even exist) or that it is large enough to satisfy the
10530 fb = mode_fits_in_fbdev(dev, mode);
10532 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
10533 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
10535 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
10537 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
10541 ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
10545 drm_framebuffer_unreference(fb);
10547 ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
10551 ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
10553 ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
10555 ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
10557 DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
10561 ret = drm_atomic_commit(state);
10563 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
10567 old->restore_state = restore_state;
10569 /* let the connector get through one full cycle before testing */
10570 intel_wait_for_vblank(dev, intel_crtc->pipe);
10574 drm_atomic_state_free(state);
10575 drm_atomic_state_free(restore_state);
10576 restore_state = state = NULL;
10578 if (ret == -EDEADLK) {
10579 drm_modeset_backoff(ctx);
10586 void intel_release_load_detect_pipe(struct drm_connector *connector,
10587 struct intel_load_detect_pipe *old,
10588 struct drm_modeset_acquire_ctx *ctx)
10590 struct intel_encoder *intel_encoder =
10591 intel_attached_encoder(connector);
10592 struct drm_encoder *encoder = &intel_encoder->base;
10593 struct drm_atomic_state *state = old->restore_state;
10596 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10597 connector->base.id, connector->name,
10598 encoder->base.id, encoder->name);
10603 ret = drm_atomic_commit(state);
10605 DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
10606 drm_atomic_state_free(state);
10610 static int i9xx_pll_refclk(struct drm_device *dev,
10611 const struct intel_crtc_state *pipe_config)
10613 struct drm_i915_private *dev_priv = dev->dev_private;
10614 u32 dpll = pipe_config->dpll_hw_state.dpll;
10616 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
10617 return dev_priv->vbt.lvds_ssc_freq;
10618 else if (HAS_PCH_SPLIT(dev))
10620 else if (!IS_GEN2(dev))
10626 /* Returns the clock of the currently programmed mode of the given pipe. */
10627 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
10628 struct intel_crtc_state *pipe_config)
10630 struct drm_device *dev = crtc->base.dev;
10631 struct drm_i915_private *dev_priv = dev->dev_private;
10632 int pipe = pipe_config->cpu_transcoder;
10633 u32 dpll = pipe_config->dpll_hw_state.dpll;
10635 intel_clock_t clock;
10637 int refclk = i9xx_pll_refclk(dev, pipe_config);
10639 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
10640 fp = pipe_config->dpll_hw_state.fp0;
10642 fp = pipe_config->dpll_hw_state.fp1;
10644 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
10645 if (IS_PINEVIEW(dev)) {
10646 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
10647 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
10649 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
10650 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
10653 if (!IS_GEN2(dev)) {
10654 if (IS_PINEVIEW(dev))
10655 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
10656 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
10658 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
10659 DPLL_FPA01_P1_POST_DIV_SHIFT);
10661 switch (dpll & DPLL_MODE_MASK) {
10662 case DPLLB_MODE_DAC_SERIAL:
10663 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
10666 case DPLLB_MODE_LVDS:
10667 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
10671 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
10672 "mode\n", (int)(dpll & DPLL_MODE_MASK));
10676 if (IS_PINEVIEW(dev))
10677 port_clock = pnv_calc_dpll_params(refclk, &clock);
10679 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10681 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
10682 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
10685 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
10686 DPLL_FPA01_P1_POST_DIV_SHIFT);
10688 if (lvds & LVDS_CLKB_POWER_UP)
10693 if (dpll & PLL_P1_DIVIDE_BY_TWO)
10696 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
10697 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
10699 if (dpll & PLL_P2_DIVIDE_BY_4)
10705 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10709 * This value includes pixel_multiplier. We will use
10710 * port_clock to compute adjusted_mode.crtc_clock in the
10711 * encoder's get_config() function.
10713 pipe_config->port_clock = port_clock;
10716 int intel_dotclock_calculate(int link_freq,
10717 const struct intel_link_m_n *m_n)
10720 * The calculation for the data clock is:
10721 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
10722 * But we want to avoid losing precison if possible, so:
10723 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
10725 * and the link clock is simpler:
10726 * link_clock = (m * link_clock) / n
10732 return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
10735 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
10736 struct intel_crtc_state *pipe_config)
10738 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10740 /* read out port_clock from the DPLL */
10741 i9xx_crtc_clock_get(crtc, pipe_config);
10744 * In case there is an active pipe without active ports,
10745 * we may need some idea for the dotclock anyway.
10746 * Calculate one based on the FDI configuration.
10748 pipe_config->base.adjusted_mode.crtc_clock =
10749 intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
10750 &pipe_config->fdi_m_n);
10753 /** Returns the currently programmed mode of the given pipe. */
10754 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
10755 struct drm_crtc *crtc)
10757 struct drm_i915_private *dev_priv = dev->dev_private;
10758 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10759 enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
10760 struct drm_display_mode *mode;
10761 struct intel_crtc_state *pipe_config;
10762 int htot = I915_READ(HTOTAL(cpu_transcoder));
10763 int hsync = I915_READ(HSYNC(cpu_transcoder));
10764 int vtot = I915_READ(VTOTAL(cpu_transcoder));
10765 int vsync = I915_READ(VSYNC(cpu_transcoder));
10766 enum pipe pipe = intel_crtc->pipe;
10768 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
10772 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
10773 if (!pipe_config) {
10779 * Construct a pipe_config sufficient for getting the clock info
10780 * back out of crtc_clock_get.
10782 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
10783 * to use a real value here instead.
10785 pipe_config->cpu_transcoder = (enum transcoder) pipe;
10786 pipe_config->pixel_multiplier = 1;
10787 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(pipe));
10788 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(pipe));
10789 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(pipe));
10790 i9xx_crtc_clock_get(intel_crtc, pipe_config);
10792 mode->clock = pipe_config->port_clock / pipe_config->pixel_multiplier;
10793 mode->hdisplay = (htot & 0xffff) + 1;
10794 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
10795 mode->hsync_start = (hsync & 0xffff) + 1;
10796 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
10797 mode->vdisplay = (vtot & 0xffff) + 1;
10798 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
10799 mode->vsync_start = (vsync & 0xffff) + 1;
10800 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
10802 drm_mode_set_name(mode);
10804 kfree(pipe_config);
10809 void intel_mark_busy(struct drm_device *dev)
10811 struct drm_i915_private *dev_priv = dev->dev_private;
10813 if (dev_priv->mm.busy)
10816 intel_runtime_pm_get(dev_priv);
10817 i915_update_gfx_val(dev_priv);
10818 if (INTEL_INFO(dev)->gen >= 6)
10819 gen6_rps_busy(dev_priv);
10820 dev_priv->mm.busy = true;
10823 void intel_mark_idle(struct drm_device *dev)
10825 struct drm_i915_private *dev_priv = dev->dev_private;
10827 if (!dev_priv->mm.busy)
10830 dev_priv->mm.busy = false;
10832 if (INTEL_INFO(dev)->gen >= 6)
10833 gen6_rps_idle(dev->dev_private);
10835 intel_runtime_pm_put(dev_priv);
10838 static void intel_crtc_destroy(struct drm_crtc *crtc)
10840 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10841 struct drm_device *dev = crtc->dev;
10842 struct intel_unpin_work *work;
10844 spin_lock_irq(&dev->event_lock);
10845 work = intel_crtc->unpin_work;
10846 intel_crtc->unpin_work = NULL;
10847 spin_unlock_irq(&dev->event_lock);
10850 cancel_work_sync(&work->work);
10854 drm_crtc_cleanup(crtc);
10859 static void intel_unpin_work_fn(struct work_struct *__work)
10861 struct intel_unpin_work *work =
10862 container_of(__work, struct intel_unpin_work, work);
10863 struct intel_crtc *crtc = to_intel_crtc(work->crtc);
10864 struct drm_device *dev = crtc->base.dev;
10865 struct drm_plane *primary = crtc->base.primary;
10867 mutex_lock(&dev->struct_mutex);
10868 intel_unpin_fb_obj(work->old_fb, primary->state->rotation);
10869 drm_gem_object_unreference(&work->pending_flip_obj->base);
10871 if (work->flip_queued_req)
10872 i915_gem_request_assign(&work->flip_queued_req, NULL);
10873 mutex_unlock(&dev->struct_mutex);
10875 intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
10876 intel_fbc_post_update(crtc);
10877 drm_framebuffer_unreference(work->old_fb);
10879 BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
10880 atomic_dec(&crtc->unpin_work_count);
10885 static void do_intel_finish_page_flip(struct drm_device *dev,
10886 struct drm_crtc *crtc)
10888 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10889 struct intel_unpin_work *work;
10890 unsigned long flags;
10892 /* Ignore early vblank irqs */
10893 if (intel_crtc == NULL)
10897 * This is called both by irq handlers and the reset code (to complete
10898 * lost pageflips) so needs the full irqsave spinlocks.
10900 spin_lock_irqsave(&dev->event_lock, flags);
10901 work = intel_crtc->unpin_work;
10903 /* Ensure we don't miss a work->pending update ... */
10906 if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
10907 spin_unlock_irqrestore(&dev->event_lock, flags);
10911 page_flip_completed(intel_crtc);
10913 spin_unlock_irqrestore(&dev->event_lock, flags);
10916 void intel_finish_page_flip(struct drm_device *dev, int pipe)
10918 struct drm_i915_private *dev_priv = dev->dev_private;
10919 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
10921 do_intel_finish_page_flip(dev, crtc);
10924 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
10926 struct drm_i915_private *dev_priv = dev->dev_private;
10927 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
10929 do_intel_finish_page_flip(dev, crtc);
10932 /* Is 'a' after or equal to 'b'? */
10933 static bool g4x_flip_count_after_eq(u32 a, u32 b)
10935 return !((a - b) & 0x80000000);
10938 static bool page_flip_finished(struct intel_crtc *crtc)
10940 struct drm_device *dev = crtc->base.dev;
10941 struct drm_i915_private *dev_priv = dev->dev_private;
10942 unsigned reset_counter;
10944 reset_counter = i915_reset_counter(&dev_priv->gpu_error);
10945 if (crtc->reset_counter != reset_counter)
10949 * The relevant registers doen't exist on pre-ctg.
10950 * As the flip done interrupt doesn't trigger for mmio
10951 * flips on gmch platforms, a flip count check isn't
10952 * really needed there. But since ctg has the registers,
10953 * include it in the check anyway.
10955 if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
10959 * BDW signals flip done immediately if the plane
10960 * is disabled, even if the plane enable is already
10961 * armed to occur at the next vblank :(
10965 * A DSPSURFLIVE check isn't enough in case the mmio and CS flips
10966 * used the same base address. In that case the mmio flip might
10967 * have completed, but the CS hasn't even executed the flip yet.
10969 * A flip count check isn't enough as the CS might have updated
10970 * the base address just after start of vblank, but before we
10971 * managed to process the interrupt. This means we'd complete the
10972 * CS flip too soon.
10974 * Combining both checks should get us a good enough result. It may
10975 * still happen that the CS flip has been executed, but has not
10976 * yet actually completed. But in case the base address is the same
10977 * anyway, we don't really care.
10979 return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
10980 crtc->unpin_work->gtt_offset &&
10981 g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_G4X(crtc->pipe)),
10982 crtc->unpin_work->flip_count);
10985 void intel_prepare_page_flip(struct drm_device *dev, int plane)
10987 struct drm_i915_private *dev_priv = dev->dev_private;
10988 struct intel_crtc *intel_crtc =
10989 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
10990 unsigned long flags;
10994 * This is called both by irq handlers and the reset code (to complete
10995 * lost pageflips) so needs the full irqsave spinlocks.
10997 * NB: An MMIO update of the plane base pointer will also
10998 * generate a page-flip completion irq, i.e. every modeset
10999 * is also accompanied by a spurious intel_prepare_page_flip().
11001 spin_lock_irqsave(&dev->event_lock, flags);
11002 if (intel_crtc->unpin_work && page_flip_finished(intel_crtc))
11003 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
11004 spin_unlock_irqrestore(&dev->event_lock, flags);
11007 static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
11009 /* Ensure that the work item is consistent when activating it ... */
11011 atomic_set(&work->pending, INTEL_FLIP_PENDING);
11012 /* and that it is marked active as soon as the irq could fire. */
11016 static int intel_gen2_queue_flip(struct drm_device *dev,
11017 struct drm_crtc *crtc,
11018 struct drm_framebuffer *fb,
11019 struct drm_i915_gem_object *obj,
11020 struct drm_i915_gem_request *req,
11023 struct intel_engine_cs *engine = req->engine;
11024 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11028 ret = intel_ring_begin(req, 6);
11032 /* Can't queue multiple flips, so wait for the previous
11033 * one to finish before executing the next.
11035 if (intel_crtc->plane)
11036 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
11038 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
11039 intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
11040 intel_ring_emit(engine, MI_NOOP);
11041 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11042 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11043 intel_ring_emit(engine, fb->pitches[0]);
11044 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11045 intel_ring_emit(engine, 0); /* aux display base address, unused */
11047 intel_mark_page_flip_active(intel_crtc->unpin_work);
11051 static int intel_gen3_queue_flip(struct drm_device *dev,
11052 struct drm_crtc *crtc,
11053 struct drm_framebuffer *fb,
11054 struct drm_i915_gem_object *obj,
11055 struct drm_i915_gem_request *req,
11058 struct intel_engine_cs *engine = req->engine;
11059 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11063 ret = intel_ring_begin(req, 6);
11067 if (intel_crtc->plane)
11068 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
11070 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
11071 intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
11072 intel_ring_emit(engine, MI_NOOP);
11073 intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 |
11074 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11075 intel_ring_emit(engine, fb->pitches[0]);
11076 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11077 intel_ring_emit(engine, MI_NOOP);
11079 intel_mark_page_flip_active(intel_crtc->unpin_work);
11083 static int intel_gen4_queue_flip(struct drm_device *dev,
11084 struct drm_crtc *crtc,
11085 struct drm_framebuffer *fb,
11086 struct drm_i915_gem_object *obj,
11087 struct drm_i915_gem_request *req,
11090 struct intel_engine_cs *engine = req->engine;
11091 struct drm_i915_private *dev_priv = dev->dev_private;
11092 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11093 uint32_t pf, pipesrc;
11096 ret = intel_ring_begin(req, 4);
11100 /* i965+ uses the linear or tiled offsets from the
11101 * Display Registers (which do not change across a page-flip)
11102 * so we need only reprogram the base address.
11104 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11105 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11106 intel_ring_emit(engine, fb->pitches[0]);
11107 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset |
11110 /* XXX Enabling the panel-fitter across page-flip is so far
11111 * untested on non-native modes, so ignore it for now.
11112 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
11115 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11116 intel_ring_emit(engine, pf | pipesrc);
11118 intel_mark_page_flip_active(intel_crtc->unpin_work);
11122 static int intel_gen6_queue_flip(struct drm_device *dev,
11123 struct drm_crtc *crtc,
11124 struct drm_framebuffer *fb,
11125 struct drm_i915_gem_object *obj,
11126 struct drm_i915_gem_request *req,
11129 struct intel_engine_cs *engine = req->engine;
11130 struct drm_i915_private *dev_priv = dev->dev_private;
11131 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11132 uint32_t pf, pipesrc;
11135 ret = intel_ring_begin(req, 4);
11139 intel_ring_emit(engine, MI_DISPLAY_FLIP |
11140 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11141 intel_ring_emit(engine, fb->pitches[0] | obj->tiling_mode);
11142 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11144 /* Contrary to the suggestions in the documentation,
11145 * "Enable Panel Fitter" does not seem to be required when page
11146 * flipping with a non-native mode, and worse causes a normal
11148 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
11151 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11152 intel_ring_emit(engine, pf | pipesrc);
11154 intel_mark_page_flip_active(intel_crtc->unpin_work);
11158 static int intel_gen7_queue_flip(struct drm_device *dev,
11159 struct drm_crtc *crtc,
11160 struct drm_framebuffer *fb,
11161 struct drm_i915_gem_object *obj,
11162 struct drm_i915_gem_request *req,
11165 struct intel_engine_cs *engine = req->engine;
11166 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11167 uint32_t plane_bit = 0;
11170 switch (intel_crtc->plane) {
11172 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
11175 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
11178 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
11181 WARN_ONCE(1, "unknown plane in flip command\n");
11186 if (engine->id == RCS) {
11189 * On Gen 8, SRM is now taking an extra dword to accommodate
11190 * 48bits addresses, and we need a NOOP for the batch size to
11198 * BSpec MI_DISPLAY_FLIP for IVB:
11199 * "The full packet must be contained within the same cache line."
11201 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
11202 * cacheline, if we ever start emitting more commands before
11203 * the MI_DISPLAY_FLIP we may need to first emit everything else,
11204 * then do the cacheline alignment, and finally emit the
11207 ret = intel_ring_cacheline_align(req);
11211 ret = intel_ring_begin(req, len);
11215 /* Unmask the flip-done completion message. Note that the bspec says that
11216 * we should do this for both the BCS and RCS, and that we must not unmask
11217 * more than one flip event at any time (or ensure that one flip message
11218 * can be sent by waiting for flip-done prior to queueing new flips).
11219 * Experimentation says that BCS works despite DERRMR masking all
11220 * flip-done completion events and that unmasking all planes at once
11221 * for the RCS also doesn't appear to drop events. Setting the DERRMR
11222 * to zero does lead to lockups within MI_DISPLAY_FLIP.
11224 if (engine->id == RCS) {
11225 intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1));
11226 intel_ring_emit_reg(engine, DERRMR);
11227 intel_ring_emit(engine, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
11228 DERRMR_PIPEB_PRI_FLIP_DONE |
11229 DERRMR_PIPEC_PRI_FLIP_DONE));
11231 intel_ring_emit(engine, MI_STORE_REGISTER_MEM_GEN8 |
11232 MI_SRM_LRM_GLOBAL_GTT);
11234 intel_ring_emit(engine, MI_STORE_REGISTER_MEM |
11235 MI_SRM_LRM_GLOBAL_GTT);
11236 intel_ring_emit_reg(engine, DERRMR);
11237 intel_ring_emit(engine, engine->scratch.gtt_offset + 256);
11238 if (IS_GEN8(dev)) {
11239 intel_ring_emit(engine, 0);
11240 intel_ring_emit(engine, MI_NOOP);
11244 intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 | plane_bit);
11245 intel_ring_emit(engine, (fb->pitches[0] | obj->tiling_mode));
11246 intel_ring_emit(engine, intel_crtc->unpin_work->gtt_offset);
11247 intel_ring_emit(engine, (MI_NOOP));
11249 intel_mark_page_flip_active(intel_crtc->unpin_work);
11253 static bool use_mmio_flip(struct intel_engine_cs *engine,
11254 struct drm_i915_gem_object *obj)
11257 * This is not being used for older platforms, because
11258 * non-availability of flip done interrupt forces us to use
11259 * CS flips. Older platforms derive flip done using some clever
11260 * tricks involving the flip_pending status bits and vblank irqs.
11261 * So using MMIO flips there would disrupt this mechanism.
11264 if (engine == NULL)
11267 if (INTEL_INFO(engine->dev)->gen < 5)
11270 if (i915.use_mmio_flip < 0)
11272 else if (i915.use_mmio_flip > 0)
11274 else if (i915.enable_execlists)
11276 else if (obj->base.dma_buf &&
11277 !reservation_object_test_signaled_rcu(obj->base.dma_buf->resv,
11281 return engine != i915_gem_request_get_engine(obj->last_write_req);
11284 static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
11285 unsigned int rotation,
11286 struct intel_unpin_work *work)
11288 struct drm_device *dev = intel_crtc->base.dev;
11289 struct drm_i915_private *dev_priv = dev->dev_private;
11290 struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
11291 const enum pipe pipe = intel_crtc->pipe;
11292 u32 ctl, stride, tile_height;
11294 ctl = I915_READ(PLANE_CTL(pipe, 0));
11295 ctl &= ~PLANE_CTL_TILED_MASK;
11296 switch (fb->modifier[0]) {
11297 case DRM_FORMAT_MOD_NONE:
11299 case I915_FORMAT_MOD_X_TILED:
11300 ctl |= PLANE_CTL_TILED_X;
11302 case I915_FORMAT_MOD_Y_TILED:
11303 ctl |= PLANE_CTL_TILED_Y;
11305 case I915_FORMAT_MOD_Yf_TILED:
11306 ctl |= PLANE_CTL_TILED_YF;
11309 MISSING_CASE(fb->modifier[0]);
11313 * The stride is either expressed as a multiple of 64 bytes chunks for
11314 * linear buffers or in number of tiles for tiled buffers.
11316 if (intel_rotation_90_or_270(rotation)) {
11317 /* stride = Surface height in tiles */
11318 tile_height = intel_tile_height(dev_priv, fb->modifier[0], 0);
11319 stride = DIV_ROUND_UP(fb->height, tile_height);
11321 stride = fb->pitches[0] /
11322 intel_fb_stride_alignment(dev_priv, fb->modifier[0],
11327 * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
11328 * PLANE_SURF updates, the update is then guaranteed to be atomic.
11330 I915_WRITE(PLANE_CTL(pipe, 0), ctl);
11331 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
11333 I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
11334 POSTING_READ(PLANE_SURF(pipe, 0));
11337 static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
11338 struct intel_unpin_work *work)
11340 struct drm_device *dev = intel_crtc->base.dev;
11341 struct drm_i915_private *dev_priv = dev->dev_private;
11342 struct intel_framebuffer *intel_fb =
11343 to_intel_framebuffer(intel_crtc->base.primary->fb);
11344 struct drm_i915_gem_object *obj = intel_fb->obj;
11345 i915_reg_t reg = DSPCNTR(intel_crtc->plane);
11348 dspcntr = I915_READ(reg);
11350 if (obj->tiling_mode != I915_TILING_NONE)
11351 dspcntr |= DISPPLANE_TILED;
11353 dspcntr &= ~DISPPLANE_TILED;
11355 I915_WRITE(reg, dspcntr);
11357 I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
11358 POSTING_READ(DSPSURF(intel_crtc->plane));
11362 * XXX: This is the temporary way to update the plane registers until we get
11363 * around to using the usual plane update functions for MMIO flips
11365 static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
11367 struct intel_crtc *crtc = mmio_flip->crtc;
11368 struct intel_unpin_work *work;
11370 spin_lock_irq(&crtc->base.dev->event_lock);
11371 work = crtc->unpin_work;
11372 spin_unlock_irq(&crtc->base.dev->event_lock);
11376 intel_mark_page_flip_active(work);
11378 intel_pipe_update_start(crtc);
11380 if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
11381 skl_do_mmio_flip(crtc, mmio_flip->rotation, work);
11383 /* use_mmio_flip() retricts MMIO flips to ilk+ */
11384 ilk_do_mmio_flip(crtc, work);
11386 intel_pipe_update_end(crtc);
11389 static void intel_mmio_flip_work_func(struct work_struct *work)
11391 struct intel_mmio_flip *mmio_flip =
11392 container_of(work, struct intel_mmio_flip, work);
11393 struct intel_framebuffer *intel_fb =
11394 to_intel_framebuffer(mmio_flip->crtc->base.primary->fb);
11395 struct drm_i915_gem_object *obj = intel_fb->obj;
11397 if (mmio_flip->req) {
11398 WARN_ON(__i915_wait_request(mmio_flip->req,
11400 &mmio_flip->i915->rps.mmioflips));
11401 i915_gem_request_unreference__unlocked(mmio_flip->req);
11404 /* For framebuffer backed by dmabuf, wait for fence */
11405 if (obj->base.dma_buf)
11406 WARN_ON(reservation_object_wait_timeout_rcu(obj->base.dma_buf->resv,
11408 MAX_SCHEDULE_TIMEOUT) < 0);
11410 intel_do_mmio_flip(mmio_flip);
11414 static int intel_queue_mmio_flip(struct drm_device *dev,
11415 struct drm_crtc *crtc,
11416 struct drm_i915_gem_object *obj)
11418 struct intel_mmio_flip *mmio_flip;
11420 mmio_flip = kmalloc(sizeof(*mmio_flip), GFP_KERNEL);
11421 if (mmio_flip == NULL)
11424 mmio_flip->i915 = to_i915(dev);
11425 mmio_flip->req = i915_gem_request_reference(obj->last_write_req);
11426 mmio_flip->crtc = to_intel_crtc(crtc);
11427 mmio_flip->rotation = crtc->primary->state->rotation;
11429 INIT_WORK(&mmio_flip->work, intel_mmio_flip_work_func);
11430 schedule_work(&mmio_flip->work);
11435 static int intel_default_queue_flip(struct drm_device *dev,
11436 struct drm_crtc *crtc,
11437 struct drm_framebuffer *fb,
11438 struct drm_i915_gem_object *obj,
11439 struct drm_i915_gem_request *req,
11445 static bool __intel_pageflip_stall_check(struct drm_device *dev,
11446 struct drm_crtc *crtc)
11448 struct drm_i915_private *dev_priv = dev->dev_private;
11449 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11450 struct intel_unpin_work *work = intel_crtc->unpin_work;
11453 if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
11456 if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
11459 if (!work->enable_stall_check)
11462 if (work->flip_ready_vblank == 0) {
11463 if (work->flip_queued_req &&
11464 !i915_gem_request_completed(work->flip_queued_req, true))
11467 work->flip_ready_vblank = drm_crtc_vblank_count(crtc);
11470 if (drm_crtc_vblank_count(crtc) - work->flip_ready_vblank < 3)
11473 /* Potential stall - if we see that the flip has happened,
11474 * assume a missed interrupt. */
11475 if (INTEL_INFO(dev)->gen >= 4)
11476 addr = I915_HI_DISPBASE(I915_READ(DSPSURF(intel_crtc->plane)));
11478 addr = I915_READ(DSPADDR(intel_crtc->plane));
11480 /* There is a potential issue here with a false positive after a flip
11481 * to the same address. We could address this by checking for a
11482 * non-incrementing frame counter.
11484 return addr == work->gtt_offset;
11487 void intel_check_page_flip(struct drm_device *dev, int pipe)
11489 struct drm_i915_private *dev_priv = dev->dev_private;
11490 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
11491 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11492 struct intel_unpin_work *work;
11494 WARN_ON(!in_interrupt());
11499 spin_lock(&dev->event_lock);
11500 work = intel_crtc->unpin_work;
11501 if (work != NULL && __intel_pageflip_stall_check(dev, crtc)) {
11502 WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
11503 work->flip_queued_vblank, drm_vblank_count(dev, pipe));
11504 page_flip_completed(intel_crtc);
11507 if (work != NULL &&
11508 drm_vblank_count(dev, pipe) - work->flip_queued_vblank > 1)
11509 intel_queue_rps_boost_for_request(dev, work->flip_queued_req);
11510 spin_unlock(&dev->event_lock);
11513 static int intel_crtc_page_flip(struct drm_crtc *crtc,
11514 struct drm_framebuffer *fb,
11515 struct drm_pending_vblank_event *event,
11516 uint32_t page_flip_flags)
11518 struct drm_device *dev = crtc->dev;
11519 struct drm_i915_private *dev_priv = dev->dev_private;
11520 struct drm_framebuffer *old_fb = crtc->primary->fb;
11521 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11522 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11523 struct drm_plane *primary = crtc->primary;
11524 enum pipe pipe = intel_crtc->pipe;
11525 struct intel_unpin_work *work;
11526 struct intel_engine_cs *engine;
11528 struct drm_i915_gem_request *request = NULL;
11532 * drm_mode_page_flip_ioctl() should already catch this, but double
11533 * check to be safe. In the future we may enable pageflipping from
11534 * a disabled primary plane.
11536 if (WARN_ON(intel_fb_obj(old_fb) == NULL))
11539 /* Can't change pixel format via MI display flips. */
11540 if (fb->pixel_format != crtc->primary->fb->pixel_format)
11544 * TILEOFF/LINOFF registers can't be changed via MI display flips.
11545 * Note that pitch changes could also affect these register.
11547 if (INTEL_INFO(dev)->gen > 3 &&
11548 (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
11549 fb->pitches[0] != crtc->primary->fb->pitches[0]))
11552 if (i915_terminally_wedged(&dev_priv->gpu_error))
11555 work = kzalloc(sizeof(*work), GFP_KERNEL);
11559 work->event = event;
11561 work->old_fb = old_fb;
11562 INIT_WORK(&work->work, intel_unpin_work_fn);
11564 ret = drm_crtc_vblank_get(crtc);
11568 /* We borrow the event spin lock for protecting unpin_work */
11569 spin_lock_irq(&dev->event_lock);
11570 if (intel_crtc->unpin_work) {
11571 /* Before declaring the flip queue wedged, check if
11572 * the hardware completed the operation behind our backs.
11574 if (__intel_pageflip_stall_check(dev, crtc)) {
11575 DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
11576 page_flip_completed(intel_crtc);
11578 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
11579 spin_unlock_irq(&dev->event_lock);
11581 drm_crtc_vblank_put(crtc);
11586 intel_crtc->unpin_work = work;
11587 spin_unlock_irq(&dev->event_lock);
11589 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
11590 flush_workqueue(dev_priv->wq);
11592 /* Reference the objects for the scheduled work. */
11593 drm_framebuffer_reference(work->old_fb);
11594 drm_gem_object_reference(&obj->base);
11596 crtc->primary->fb = fb;
11597 update_state_fb(crtc->primary);
11598 intel_fbc_pre_update(intel_crtc);
11600 work->pending_flip_obj = obj;
11602 ret = i915_mutex_lock_interruptible(dev);
11606 intel_crtc->reset_counter = i915_reset_counter(&dev_priv->gpu_error);
11607 if (__i915_reset_in_progress_or_wedged(intel_crtc->reset_counter)) {
11612 atomic_inc(&intel_crtc->unpin_work_count);
11614 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
11615 work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
11617 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
11618 engine = &dev_priv->engine[BCS];
11619 if (obj->tiling_mode != intel_fb_obj(work->old_fb)->tiling_mode)
11620 /* vlv: DISPLAY_FLIP fails to change tiling */
11622 } else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
11623 engine = &dev_priv->engine[BCS];
11624 } else if (INTEL_INFO(dev)->gen >= 7) {
11625 engine = i915_gem_request_get_engine(obj->last_write_req);
11626 if (engine == NULL || engine->id != RCS)
11627 engine = &dev_priv->engine[BCS];
11629 engine = &dev_priv->engine[RCS];
11632 mmio_flip = use_mmio_flip(engine, obj);
11634 /* When using CS flips, we want to emit semaphores between rings.
11635 * However, when using mmio flips we will create a task to do the
11636 * synchronisation, so all we want here is to pin the framebuffer
11637 * into the display plane and skip any waits.
11640 ret = i915_gem_object_sync(obj, engine, &request);
11642 goto cleanup_pending;
11645 ret = intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
11647 goto cleanup_pending;
11649 work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
11651 work->gtt_offset += intel_crtc->dspaddr_offset;
11654 ret = intel_queue_mmio_flip(dev, crtc, obj);
11656 goto cleanup_unpin;
11658 i915_gem_request_assign(&work->flip_queued_req,
11659 obj->last_write_req);
11662 request = i915_gem_request_alloc(engine, NULL);
11663 if (IS_ERR(request)) {
11664 ret = PTR_ERR(request);
11665 goto cleanup_unpin;
11669 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
11672 goto cleanup_unpin;
11674 i915_gem_request_assign(&work->flip_queued_req, request);
11678 i915_add_request_no_flush(request);
11680 work->flip_queued_vblank = drm_crtc_vblank_count(crtc);
11681 work->enable_stall_check = true;
11683 i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
11684 to_intel_plane(primary)->frontbuffer_bit);
11685 mutex_unlock(&dev->struct_mutex);
11687 intel_frontbuffer_flip_prepare(dev,
11688 to_intel_plane(primary)->frontbuffer_bit);
11690 trace_i915_flip_request(intel_crtc->plane, obj);
11695 intel_unpin_fb_obj(fb, crtc->primary->state->rotation);
11697 if (!IS_ERR_OR_NULL(request))
11698 i915_add_request_no_flush(request);
11699 atomic_dec(&intel_crtc->unpin_work_count);
11700 mutex_unlock(&dev->struct_mutex);
11702 crtc->primary->fb = old_fb;
11703 update_state_fb(crtc->primary);
11705 drm_gem_object_unreference_unlocked(&obj->base);
11706 drm_framebuffer_unreference(work->old_fb);
11708 spin_lock_irq(&dev->event_lock);
11709 intel_crtc->unpin_work = NULL;
11710 spin_unlock_irq(&dev->event_lock);
11712 drm_crtc_vblank_put(crtc);
11717 struct drm_atomic_state *state;
11718 struct drm_plane_state *plane_state;
11721 state = drm_atomic_state_alloc(dev);
11724 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
11727 plane_state = drm_atomic_get_plane_state(state, primary);
11728 ret = PTR_ERR_OR_ZERO(plane_state);
11730 drm_atomic_set_fb_for_plane(plane_state, fb);
11732 ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
11734 ret = drm_atomic_commit(state);
11737 if (ret == -EDEADLK) {
11738 drm_modeset_backoff(state->acquire_ctx);
11739 drm_atomic_state_clear(state);
11744 drm_atomic_state_free(state);
11746 if (ret == 0 && event) {
11747 spin_lock_irq(&dev->event_lock);
11748 drm_crtc_send_vblank_event(crtc, event);
11749 spin_unlock_irq(&dev->event_lock);
11757 * intel_wm_need_update - Check whether watermarks need updating
11758 * @plane: drm plane
11759 * @state: new plane state
11761 * Check current plane state versus the new one to determine whether
11762 * watermarks need to be recalculated.
11764 * Returns true or false.
11766 static bool intel_wm_need_update(struct drm_plane *plane,
11767 struct drm_plane_state *state)
11769 struct intel_plane_state *new = to_intel_plane_state(state);
11770 struct intel_plane_state *cur = to_intel_plane_state(plane->state);
11772 /* Update watermarks on tiling or size changes. */
11773 if (new->visible != cur->visible)
11776 if (!cur->base.fb || !new->base.fb)
11779 if (cur->base.fb->modifier[0] != new->base.fb->modifier[0] ||
11780 cur->base.rotation != new->base.rotation ||
11781 drm_rect_width(&new->src) != drm_rect_width(&cur->src) ||
11782 drm_rect_height(&new->src) != drm_rect_height(&cur->src) ||
11783 drm_rect_width(&new->dst) != drm_rect_width(&cur->dst) ||
11784 drm_rect_height(&new->dst) != drm_rect_height(&cur->dst))
11790 static bool needs_scaling(struct intel_plane_state *state)
11792 int src_w = drm_rect_width(&state->src) >> 16;
11793 int src_h = drm_rect_height(&state->src) >> 16;
11794 int dst_w = drm_rect_width(&state->dst);
11795 int dst_h = drm_rect_height(&state->dst);
11797 return (src_w != dst_w || src_h != dst_h);
11800 int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
11801 struct drm_plane_state *plane_state)
11803 struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc_state);
11804 struct drm_crtc *crtc = crtc_state->crtc;
11805 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11806 struct drm_plane *plane = plane_state->plane;
11807 struct drm_device *dev = crtc->dev;
11808 struct drm_i915_private *dev_priv = to_i915(dev);
11809 struct intel_plane_state *old_plane_state =
11810 to_intel_plane_state(plane->state);
11811 int idx = intel_crtc->base.base.id, ret;
11812 bool mode_changed = needs_modeset(crtc_state);
11813 bool was_crtc_enabled = crtc->state->active;
11814 bool is_crtc_enabled = crtc_state->active;
11815 bool turn_off, turn_on, visible, was_visible;
11816 struct drm_framebuffer *fb = plane_state->fb;
11818 if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
11819 plane->type != DRM_PLANE_TYPE_CURSOR) {
11820 ret = skl_update_scaler_plane(
11821 to_intel_crtc_state(crtc_state),
11822 to_intel_plane_state(plane_state));
11827 was_visible = old_plane_state->visible;
11828 visible = to_intel_plane_state(plane_state)->visible;
11830 if (!was_crtc_enabled && WARN_ON(was_visible))
11831 was_visible = false;
11834 * Visibility is calculated as if the crtc was on, but
11835 * after scaler setup everything depends on it being off
11836 * when the crtc isn't active.
11838 if (!is_crtc_enabled)
11839 to_intel_plane_state(plane_state)->visible = visible = false;
11841 if (!was_visible && !visible)
11844 if (fb != old_plane_state->base.fb)
11845 pipe_config->fb_changed = true;
11847 turn_off = was_visible && (!visible || mode_changed);
11848 turn_on = visible && (!was_visible || mode_changed);
11850 DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx,
11851 plane->base.id, fb ? fb->base.id : -1);
11853 DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n",
11854 plane->base.id, was_visible, visible,
11855 turn_off, turn_on, mode_changed);
11858 pipe_config->update_wm_pre = true;
11860 /* must disable cxsr around plane enable/disable */
11861 if (plane->type != DRM_PLANE_TYPE_CURSOR)
11862 pipe_config->disable_cxsr = true;
11863 } else if (turn_off) {
11864 pipe_config->update_wm_post = true;
11866 /* must disable cxsr around plane enable/disable */
11867 if (plane->type != DRM_PLANE_TYPE_CURSOR)
11868 pipe_config->disable_cxsr = true;
11869 } else if (intel_wm_need_update(plane, plane_state)) {
11870 /* FIXME bollocks */
11871 pipe_config->update_wm_pre = true;
11872 pipe_config->update_wm_post = true;
11875 /* Pre-gen9 platforms need two-step watermark updates */
11876 if ((pipe_config->update_wm_pre || pipe_config->update_wm_post) &&
11877 INTEL_INFO(dev)->gen < 9 && dev_priv->display.optimize_watermarks)
11878 to_intel_crtc_state(crtc_state)->wm.need_postvbl_update = true;
11880 if (visible || was_visible)
11881 pipe_config->fb_bits |= to_intel_plane(plane)->frontbuffer_bit;
11884 * WaCxSRDisabledForSpriteScaling:ivb
11886 * cstate->update_wm was already set above, so this flag will
11887 * take effect when we commit and program watermarks.
11889 if (plane->type == DRM_PLANE_TYPE_OVERLAY && IS_IVYBRIDGE(dev) &&
11890 needs_scaling(to_intel_plane_state(plane_state)) &&
11891 !needs_scaling(old_plane_state))
11892 pipe_config->disable_lp_wm = true;
11897 static bool encoders_cloneable(const struct intel_encoder *a,
11898 const struct intel_encoder *b)
11900 /* masks could be asymmetric, so check both ways */
11901 return a == b || (a->cloneable & (1 << b->type) &&
11902 b->cloneable & (1 << a->type));
11905 static bool check_single_encoder_cloning(struct drm_atomic_state *state,
11906 struct intel_crtc *crtc,
11907 struct intel_encoder *encoder)
11909 struct intel_encoder *source_encoder;
11910 struct drm_connector *connector;
11911 struct drm_connector_state *connector_state;
11914 for_each_connector_in_state(state, connector, connector_state, i) {
11915 if (connector_state->crtc != &crtc->base)
11919 to_intel_encoder(connector_state->best_encoder);
11920 if (!encoders_cloneable(encoder, source_encoder))
11927 static bool check_encoder_cloning(struct drm_atomic_state *state,
11928 struct intel_crtc *crtc)
11930 struct intel_encoder *encoder;
11931 struct drm_connector *connector;
11932 struct drm_connector_state *connector_state;
11935 for_each_connector_in_state(state, connector, connector_state, i) {
11936 if (connector_state->crtc != &crtc->base)
11939 encoder = to_intel_encoder(connector_state->best_encoder);
11940 if (!check_single_encoder_cloning(state, crtc, encoder))
11947 static int intel_crtc_atomic_check(struct drm_crtc *crtc,
11948 struct drm_crtc_state *crtc_state)
11950 struct drm_device *dev = crtc->dev;
11951 struct drm_i915_private *dev_priv = dev->dev_private;
11952 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11953 struct intel_crtc_state *pipe_config =
11954 to_intel_crtc_state(crtc_state);
11955 struct drm_atomic_state *state = crtc_state->state;
11957 bool mode_changed = needs_modeset(crtc_state);
11959 if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
11960 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
11964 if (mode_changed && !crtc_state->active)
11965 pipe_config->update_wm_post = true;
11967 if (mode_changed && crtc_state->enable &&
11968 dev_priv->display.crtc_compute_clock &&
11969 !WARN_ON(pipe_config->shared_dpll)) {
11970 ret = dev_priv->display.crtc_compute_clock(intel_crtc,
11976 if (crtc_state->color_mgmt_changed) {
11977 ret = intel_color_check(crtc, crtc_state);
11983 if (dev_priv->display.compute_pipe_wm) {
11984 ret = dev_priv->display.compute_pipe_wm(pipe_config);
11986 DRM_DEBUG_KMS("Target pipe watermarks are invalid\n");
11991 if (dev_priv->display.compute_intermediate_wm &&
11992 !to_intel_atomic_state(state)->skip_intermediate_wm) {
11993 if (WARN_ON(!dev_priv->display.compute_pipe_wm))
11997 * Calculate 'intermediate' watermarks that satisfy both the
11998 * old state and the new state. We can program these
12001 ret = dev_priv->display.compute_intermediate_wm(crtc->dev,
12005 DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n");
12008 } else if (dev_priv->display.compute_intermediate_wm) {
12009 if (HAS_PCH_SPLIT(dev_priv) && INTEL_GEN(dev_priv) < 9)
12010 pipe_config->wm.intermediate = pipe_config->wm.optimal.ilk;
12013 if (INTEL_INFO(dev)->gen >= 9) {
12015 ret = skl_update_scaler_crtc(pipe_config);
12018 ret = intel_atomic_setup_scalers(dev, intel_crtc,
12025 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
12026 .mode_set_base_atomic = intel_pipe_set_base_atomic,
12027 .atomic_begin = intel_begin_crtc_commit,
12028 .atomic_flush = intel_finish_crtc_commit,
12029 .atomic_check = intel_crtc_atomic_check,
12032 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
12034 struct intel_connector *connector;
12036 for_each_intel_connector(dev, connector) {
12037 if (connector->base.state->crtc)
12038 drm_connector_unreference(&connector->base);
12040 if (connector->base.encoder) {
12041 connector->base.state->best_encoder =
12042 connector->base.encoder;
12043 connector->base.state->crtc =
12044 connector->base.encoder->crtc;
12046 drm_connector_reference(&connector->base);
12048 connector->base.state->best_encoder = NULL;
12049 connector->base.state->crtc = NULL;
12055 connected_sink_compute_bpp(struct intel_connector *connector,
12056 struct intel_crtc_state *pipe_config)
12058 int bpp = pipe_config->pipe_bpp;
12060 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
12061 connector->base.base.id,
12062 connector->base.name);
12064 /* Don't use an invalid EDID bpc value */
12065 if (connector->base.display_info.bpc &&
12066 connector->base.display_info.bpc * 3 < bpp) {
12067 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
12068 bpp, connector->base.display_info.bpc*3);
12069 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
12072 /* Clamp bpp to default limit on screens without EDID 1.4 */
12073 if (connector->base.display_info.bpc == 0) {
12074 int type = connector->base.connector_type;
12075 int clamp_bpp = 24;
12077 /* Fall back to 18 bpp when DP sink capability is unknown. */
12078 if (type == DRM_MODE_CONNECTOR_DisplayPort ||
12079 type == DRM_MODE_CONNECTOR_eDP)
12082 if (bpp > clamp_bpp) {
12083 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of %d\n",
12085 pipe_config->pipe_bpp = clamp_bpp;
12091 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
12092 struct intel_crtc_state *pipe_config)
12094 struct drm_device *dev = crtc->base.dev;
12095 struct drm_atomic_state *state;
12096 struct drm_connector *connector;
12097 struct drm_connector_state *connector_state;
12100 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)))
12102 else if (INTEL_INFO(dev)->gen >= 5)
12108 pipe_config->pipe_bpp = bpp;
12110 state = pipe_config->base.state;
12112 /* Clamp display bpp to EDID value */
12113 for_each_connector_in_state(state, connector, connector_state, i) {
12114 if (connector_state->crtc != &crtc->base)
12117 connected_sink_compute_bpp(to_intel_connector(connector),
12124 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
12126 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
12127 "type: 0x%x flags: 0x%x\n",
12129 mode->crtc_hdisplay, mode->crtc_hsync_start,
12130 mode->crtc_hsync_end, mode->crtc_htotal,
12131 mode->crtc_vdisplay, mode->crtc_vsync_start,
12132 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
12135 static void intel_dump_pipe_config(struct intel_crtc *crtc,
12136 struct intel_crtc_state *pipe_config,
12137 const char *context)
12139 struct drm_device *dev = crtc->base.dev;
12140 struct drm_plane *plane;
12141 struct intel_plane *intel_plane;
12142 struct intel_plane_state *state;
12143 struct drm_framebuffer *fb;
12145 DRM_DEBUG_KMS("[CRTC:%d]%s config %p for pipe %c\n", crtc->base.base.id,
12146 context, pipe_config, pipe_name(crtc->pipe));
12148 DRM_DEBUG_KMS("cpu_transcoder: %s\n", transcoder_name(pipe_config->cpu_transcoder));
12149 DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
12150 pipe_config->pipe_bpp, pipe_config->dither);
12151 DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12152 pipe_config->has_pch_encoder,
12153 pipe_config->fdi_lanes,
12154 pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
12155 pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
12156 pipe_config->fdi_m_n.tu);
12157 DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12158 pipe_config->has_dp_encoder,
12159 pipe_config->lane_count,
12160 pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
12161 pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
12162 pipe_config->dp_m_n.tu);
12164 DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
12165 pipe_config->has_dp_encoder,
12166 pipe_config->lane_count,
12167 pipe_config->dp_m2_n2.gmch_m,
12168 pipe_config->dp_m2_n2.gmch_n,
12169 pipe_config->dp_m2_n2.link_m,
12170 pipe_config->dp_m2_n2.link_n,
12171 pipe_config->dp_m2_n2.tu);
12173 DRM_DEBUG_KMS("audio: %i, infoframes: %i\n",
12174 pipe_config->has_audio,
12175 pipe_config->has_infoframe);
12177 DRM_DEBUG_KMS("requested mode:\n");
12178 drm_mode_debug_printmodeline(&pipe_config->base.mode);
12179 DRM_DEBUG_KMS("adjusted mode:\n");
12180 drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
12181 intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
12182 DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
12183 DRM_DEBUG_KMS("pipe src size: %dx%d\n",
12184 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
12185 DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
12187 pipe_config->scaler_state.scaler_users,
12188 pipe_config->scaler_state.scaler_id);
12189 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
12190 pipe_config->gmch_pfit.control,
12191 pipe_config->gmch_pfit.pgm_ratios,
12192 pipe_config->gmch_pfit.lvds_border_bits);
12193 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
12194 pipe_config->pch_pfit.pos,
12195 pipe_config->pch_pfit.size,
12196 pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
12197 DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
12198 DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
12200 if (IS_BROXTON(dev)) {
12201 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
12202 "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
12203 "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
12204 pipe_config->ddi_pll_sel,
12205 pipe_config->dpll_hw_state.ebb0,
12206 pipe_config->dpll_hw_state.ebb4,
12207 pipe_config->dpll_hw_state.pll0,
12208 pipe_config->dpll_hw_state.pll1,
12209 pipe_config->dpll_hw_state.pll2,
12210 pipe_config->dpll_hw_state.pll3,
12211 pipe_config->dpll_hw_state.pll6,
12212 pipe_config->dpll_hw_state.pll8,
12213 pipe_config->dpll_hw_state.pll9,
12214 pipe_config->dpll_hw_state.pll10,
12215 pipe_config->dpll_hw_state.pcsdw12);
12216 } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
12217 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
12218 "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
12219 pipe_config->ddi_pll_sel,
12220 pipe_config->dpll_hw_state.ctrl1,
12221 pipe_config->dpll_hw_state.cfgcr1,
12222 pipe_config->dpll_hw_state.cfgcr2);
12223 } else if (HAS_DDI(dev)) {
12224 DRM_DEBUG_KMS("ddi_pll_sel: 0x%x; dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
12225 pipe_config->ddi_pll_sel,
12226 pipe_config->dpll_hw_state.wrpll,
12227 pipe_config->dpll_hw_state.spll);
12229 DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
12230 "fp0: 0x%x, fp1: 0x%x\n",
12231 pipe_config->dpll_hw_state.dpll,
12232 pipe_config->dpll_hw_state.dpll_md,
12233 pipe_config->dpll_hw_state.fp0,
12234 pipe_config->dpll_hw_state.fp1);
12237 DRM_DEBUG_KMS("planes on this crtc\n");
12238 list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
12239 intel_plane = to_intel_plane(plane);
12240 if (intel_plane->pipe != crtc->pipe)
12243 state = to_intel_plane_state(plane->state);
12244 fb = state->base.fb;
12246 DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d "
12247 "disabled, scaler_id = %d\n",
12248 plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
12249 plane->base.id, intel_plane->pipe,
12250 (crtc->base.primary == plane) ? 0 : intel_plane->plane + 1,
12251 drm_plane_index(plane), state->scaler_id);
12255 DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d enabled",
12256 plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
12257 plane->base.id, intel_plane->pipe,
12258 crtc->base.primary == plane ? 0 : intel_plane->plane + 1,
12259 drm_plane_index(plane));
12260 DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = 0x%x",
12261 fb->base.id, fb->width, fb->height, fb->pixel_format);
12262 DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
12264 state->src.x1 >> 16, state->src.y1 >> 16,
12265 drm_rect_width(&state->src) >> 16,
12266 drm_rect_height(&state->src) >> 16,
12267 state->dst.x1, state->dst.y1,
12268 drm_rect_width(&state->dst), drm_rect_height(&state->dst));
12272 static bool check_digital_port_conflicts(struct drm_atomic_state *state)
12274 struct drm_device *dev = state->dev;
12275 struct drm_connector *connector;
12276 unsigned int used_ports = 0;
12279 * Walk the connector list instead of the encoder
12280 * list to detect the problem on ddi platforms
12281 * where there's just one encoder per digital port.
12283 drm_for_each_connector(connector, dev) {
12284 struct drm_connector_state *connector_state;
12285 struct intel_encoder *encoder;
12287 connector_state = drm_atomic_get_existing_connector_state(state, connector);
12288 if (!connector_state)
12289 connector_state = connector->state;
12291 if (!connector_state->best_encoder)
12294 encoder = to_intel_encoder(connector_state->best_encoder);
12296 WARN_ON(!connector_state->crtc);
12298 switch (encoder->type) {
12299 unsigned int port_mask;
12300 case INTEL_OUTPUT_UNKNOWN:
12301 if (WARN_ON(!HAS_DDI(dev)))
12303 case INTEL_OUTPUT_DISPLAYPORT:
12304 case INTEL_OUTPUT_HDMI:
12305 case INTEL_OUTPUT_EDP:
12306 port_mask = 1 << enc_to_dig_port(&encoder->base)->port;
12308 /* the same port mustn't appear more than once */
12309 if (used_ports & port_mask)
12312 used_ports |= port_mask;
12322 clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
12324 struct drm_crtc_state tmp_state;
12325 struct intel_crtc_scaler_state scaler_state;
12326 struct intel_dpll_hw_state dpll_hw_state;
12327 struct intel_shared_dpll *shared_dpll;
12328 uint32_t ddi_pll_sel;
12331 /* FIXME: before the switch to atomic started, a new pipe_config was
12332 * kzalloc'd. Code that depends on any field being zero should be
12333 * fixed, so that the crtc_state can be safely duplicated. For now,
12334 * only fields that are know to not cause problems are preserved. */
12336 tmp_state = crtc_state->base;
12337 scaler_state = crtc_state->scaler_state;
12338 shared_dpll = crtc_state->shared_dpll;
12339 dpll_hw_state = crtc_state->dpll_hw_state;
12340 ddi_pll_sel = crtc_state->ddi_pll_sel;
12341 force_thru = crtc_state->pch_pfit.force_thru;
12343 memset(crtc_state, 0, sizeof *crtc_state);
12345 crtc_state->base = tmp_state;
12346 crtc_state->scaler_state = scaler_state;
12347 crtc_state->shared_dpll = shared_dpll;
12348 crtc_state->dpll_hw_state = dpll_hw_state;
12349 crtc_state->ddi_pll_sel = ddi_pll_sel;
12350 crtc_state->pch_pfit.force_thru = force_thru;
12354 intel_modeset_pipe_config(struct drm_crtc *crtc,
12355 struct intel_crtc_state *pipe_config)
12357 struct drm_atomic_state *state = pipe_config->base.state;
12358 struct intel_encoder *encoder;
12359 struct drm_connector *connector;
12360 struct drm_connector_state *connector_state;
12361 int base_bpp, ret = -EINVAL;
12365 clear_intel_crtc_state(pipe_config);
12367 pipe_config->cpu_transcoder =
12368 (enum transcoder) to_intel_crtc(crtc)->pipe;
12371 * Sanitize sync polarity flags based on requested ones. If neither
12372 * positive or negative polarity is requested, treat this as meaning
12373 * negative polarity.
12375 if (!(pipe_config->base.adjusted_mode.flags &
12376 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
12377 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
12379 if (!(pipe_config->base.adjusted_mode.flags &
12380 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
12381 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
12383 base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
12389 * Determine the real pipe dimensions. Note that stereo modes can
12390 * increase the actual pipe size due to the frame doubling and
12391 * insertion of additional space for blanks between the frame. This
12392 * is stored in the crtc timings. We use the requested mode to do this
12393 * computation to clearly distinguish it from the adjusted mode, which
12394 * can be changed by the connectors in the below retry loop.
12396 drm_crtc_get_hv_timing(&pipe_config->base.mode,
12397 &pipe_config->pipe_src_w,
12398 &pipe_config->pipe_src_h);
12401 /* Ensure the port clock defaults are reset when retrying. */
12402 pipe_config->port_clock = 0;
12403 pipe_config->pixel_multiplier = 1;
12405 /* Fill in default crtc timings, allow encoders to overwrite them. */
12406 drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
12407 CRTC_STEREO_DOUBLE);
12409 /* Pass our mode to the connectors and the CRTC to give them a chance to
12410 * adjust it according to limitations or connector properties, and also
12411 * a chance to reject the mode entirely.
12413 for_each_connector_in_state(state, connector, connector_state, i) {
12414 if (connector_state->crtc != crtc)
12417 encoder = to_intel_encoder(connector_state->best_encoder);
12419 if (!(encoder->compute_config(encoder, pipe_config))) {
12420 DRM_DEBUG_KMS("Encoder config failure\n");
12425 /* Set default port clock if not overwritten by the encoder. Needs to be
12426 * done afterwards in case the encoder adjusts the mode. */
12427 if (!pipe_config->port_clock)
12428 pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
12429 * pipe_config->pixel_multiplier;
12431 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
12433 DRM_DEBUG_KMS("CRTC fixup failed\n");
12437 if (ret == RETRY) {
12438 if (WARN(!retry, "loop in pipe configuration computation\n")) {
12443 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
12445 goto encoder_retry;
12448 /* Dithering seems to not pass-through bits correctly when it should, so
12449 * only enable it on 6bpc panels. */
12450 pipe_config->dither = pipe_config->pipe_bpp == 6*3;
12451 DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
12452 base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
12459 intel_modeset_update_crtc_state(struct drm_atomic_state *state)
12461 struct drm_crtc *crtc;
12462 struct drm_crtc_state *crtc_state;
12465 /* Double check state. */
12466 for_each_crtc_in_state(state, crtc, crtc_state, i) {
12467 to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
12469 /* Update hwmode for vblank functions */
12470 if (crtc->state->active)
12471 crtc->hwmode = crtc->state->adjusted_mode;
12473 crtc->hwmode.crtc_clock = 0;
12476 * Update legacy state to satisfy fbc code. This can
12477 * be removed when fbc uses the atomic state.
12479 if (drm_atomic_get_existing_plane_state(state, crtc->primary)) {
12480 struct drm_plane_state *plane_state = crtc->primary->state;
12482 crtc->primary->fb = plane_state->fb;
12483 crtc->x = plane_state->src_x >> 16;
12484 crtc->y = plane_state->src_y >> 16;
12489 static bool intel_fuzzy_clock_check(int clock1, int clock2)
12493 if (clock1 == clock2)
12496 if (!clock1 || !clock2)
12499 diff = abs(clock1 - clock2);
12501 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
12507 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
12508 list_for_each_entry((intel_crtc), \
12509 &(dev)->mode_config.crtc_list, \
12511 for_each_if (mask & (1 <<(intel_crtc)->pipe))
12514 intel_compare_m_n(unsigned int m, unsigned int n,
12515 unsigned int m2, unsigned int n2,
12518 if (m == m2 && n == n2)
12521 if (exact || !m || !n || !m2 || !n2)
12524 BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
12531 } else if (n < n2) {
12541 return intel_fuzzy_clock_check(m, m2);
12545 intel_compare_link_m_n(const struct intel_link_m_n *m_n,
12546 struct intel_link_m_n *m2_n2,
12549 if (m_n->tu == m2_n2->tu &&
12550 intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
12551 m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
12552 intel_compare_m_n(m_n->link_m, m_n->link_n,
12553 m2_n2->link_m, m2_n2->link_n, !adjust)) {
12564 intel_pipe_config_compare(struct drm_device *dev,
12565 struct intel_crtc_state *current_config,
12566 struct intel_crtc_state *pipe_config,
12571 #define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
12574 DRM_ERROR(fmt, ##__VA_ARGS__); \
12576 DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
12579 #define PIPE_CONF_CHECK_X(name) \
12580 if (current_config->name != pipe_config->name) { \
12581 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12582 "(expected 0x%08x, found 0x%08x)\n", \
12583 current_config->name, \
12584 pipe_config->name); \
12588 #define PIPE_CONF_CHECK_I(name) \
12589 if (current_config->name != pipe_config->name) { \
12590 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12591 "(expected %i, found %i)\n", \
12592 current_config->name, \
12593 pipe_config->name); \
12597 #define PIPE_CONF_CHECK_P(name) \
12598 if (current_config->name != pipe_config->name) { \
12599 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12600 "(expected %p, found %p)\n", \
12601 current_config->name, \
12602 pipe_config->name); \
12606 #define PIPE_CONF_CHECK_M_N(name) \
12607 if (!intel_compare_link_m_n(¤t_config->name, \
12608 &pipe_config->name,\
12610 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12611 "(expected tu %i gmch %i/%i link %i/%i, " \
12612 "found tu %i, gmch %i/%i link %i/%i)\n", \
12613 current_config->name.tu, \
12614 current_config->name.gmch_m, \
12615 current_config->name.gmch_n, \
12616 current_config->name.link_m, \
12617 current_config->name.link_n, \
12618 pipe_config->name.tu, \
12619 pipe_config->name.gmch_m, \
12620 pipe_config->name.gmch_n, \
12621 pipe_config->name.link_m, \
12622 pipe_config->name.link_n); \
12626 /* This is required for BDW+ where there is only one set of registers for
12627 * switching between high and low RR.
12628 * This macro can be used whenever a comparison has to be made between one
12629 * hw state and multiple sw state variables.
12631 #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
12632 if (!intel_compare_link_m_n(¤t_config->name, \
12633 &pipe_config->name, adjust) && \
12634 !intel_compare_link_m_n(¤t_config->alt_name, \
12635 &pipe_config->name, adjust)) { \
12636 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12637 "(expected tu %i gmch %i/%i link %i/%i, " \
12638 "or tu %i gmch %i/%i link %i/%i, " \
12639 "found tu %i, gmch %i/%i link %i/%i)\n", \
12640 current_config->name.tu, \
12641 current_config->name.gmch_m, \
12642 current_config->name.gmch_n, \
12643 current_config->name.link_m, \
12644 current_config->name.link_n, \
12645 current_config->alt_name.tu, \
12646 current_config->alt_name.gmch_m, \
12647 current_config->alt_name.gmch_n, \
12648 current_config->alt_name.link_m, \
12649 current_config->alt_name.link_n, \
12650 pipe_config->name.tu, \
12651 pipe_config->name.gmch_m, \
12652 pipe_config->name.gmch_n, \
12653 pipe_config->name.link_m, \
12654 pipe_config->name.link_n); \
12658 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
12659 if ((current_config->name ^ pipe_config->name) & (mask)) { \
12660 INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
12661 "(expected %i, found %i)\n", \
12662 current_config->name & (mask), \
12663 pipe_config->name & (mask)); \
12667 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
12668 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
12669 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12670 "(expected %i, found %i)\n", \
12671 current_config->name, \
12672 pipe_config->name); \
12676 #define PIPE_CONF_QUIRK(quirk) \
12677 ((current_config->quirks | pipe_config->quirks) & (quirk))
12679 PIPE_CONF_CHECK_I(cpu_transcoder);
12681 PIPE_CONF_CHECK_I(has_pch_encoder);
12682 PIPE_CONF_CHECK_I(fdi_lanes);
12683 PIPE_CONF_CHECK_M_N(fdi_m_n);
12685 PIPE_CONF_CHECK_I(has_dp_encoder);
12686 PIPE_CONF_CHECK_I(lane_count);
12688 if (INTEL_INFO(dev)->gen < 8) {
12689 PIPE_CONF_CHECK_M_N(dp_m_n);
12691 if (current_config->has_drrs)
12692 PIPE_CONF_CHECK_M_N(dp_m2_n2);
12694 PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
12696 PIPE_CONF_CHECK_I(has_dsi_encoder);
12698 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
12699 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
12700 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
12701 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
12702 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
12703 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
12705 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
12706 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
12707 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
12708 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
12709 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
12710 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
12712 PIPE_CONF_CHECK_I(pixel_multiplier);
12713 PIPE_CONF_CHECK_I(has_hdmi_sink);
12714 if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
12715 IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
12716 PIPE_CONF_CHECK_I(limited_color_range);
12717 PIPE_CONF_CHECK_I(has_infoframe);
12719 PIPE_CONF_CHECK_I(has_audio);
12721 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12722 DRM_MODE_FLAG_INTERLACE);
12724 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
12725 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12726 DRM_MODE_FLAG_PHSYNC);
12727 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12728 DRM_MODE_FLAG_NHSYNC);
12729 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12730 DRM_MODE_FLAG_PVSYNC);
12731 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12732 DRM_MODE_FLAG_NVSYNC);
12735 PIPE_CONF_CHECK_X(gmch_pfit.control);
12736 /* pfit ratios are autocomputed by the hw on gen4+ */
12737 if (INTEL_INFO(dev)->gen < 4)
12738 PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios);
12739 PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
12742 PIPE_CONF_CHECK_I(pipe_src_w);
12743 PIPE_CONF_CHECK_I(pipe_src_h);
12745 PIPE_CONF_CHECK_I(pch_pfit.enabled);
12746 if (current_config->pch_pfit.enabled) {
12747 PIPE_CONF_CHECK_X(pch_pfit.pos);
12748 PIPE_CONF_CHECK_X(pch_pfit.size);
12751 PIPE_CONF_CHECK_I(scaler_state.scaler_id);
12754 /* BDW+ don't expose a synchronous way to read the state */
12755 if (IS_HASWELL(dev))
12756 PIPE_CONF_CHECK_I(ips_enabled);
12758 PIPE_CONF_CHECK_I(double_wide);
12760 PIPE_CONF_CHECK_X(ddi_pll_sel);
12762 PIPE_CONF_CHECK_P(shared_dpll);
12763 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
12764 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
12765 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
12766 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
12767 PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
12768 PIPE_CONF_CHECK_X(dpll_hw_state.spll);
12769 PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
12770 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
12771 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
12773 PIPE_CONF_CHECK_X(dsi_pll.ctrl);
12774 PIPE_CONF_CHECK_X(dsi_pll.div);
12776 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
12777 PIPE_CONF_CHECK_I(pipe_bpp);
12779 PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
12780 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
12782 #undef PIPE_CONF_CHECK_X
12783 #undef PIPE_CONF_CHECK_I
12784 #undef PIPE_CONF_CHECK_P
12785 #undef PIPE_CONF_CHECK_FLAGS
12786 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
12787 #undef PIPE_CONF_QUIRK
12788 #undef INTEL_ERR_OR_DBG_KMS
12793 static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv,
12794 const struct intel_crtc_state *pipe_config)
12796 if (pipe_config->has_pch_encoder) {
12797 int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
12798 &pipe_config->fdi_m_n);
12799 int dotclock = pipe_config->base.adjusted_mode.crtc_clock;
12802 * FDI already provided one idea for the dotclock.
12803 * Yell if the encoder disagrees.
12805 WARN(!intel_fuzzy_clock_check(fdi_dotclock, dotclock),
12806 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
12807 fdi_dotclock, dotclock);
12811 static void verify_wm_state(struct drm_crtc *crtc,
12812 struct drm_crtc_state *new_state)
12814 struct drm_device *dev = crtc->dev;
12815 struct drm_i915_private *dev_priv = dev->dev_private;
12816 struct skl_ddb_allocation hw_ddb, *sw_ddb;
12817 struct skl_ddb_entry *hw_entry, *sw_entry;
12818 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12819 const enum pipe pipe = intel_crtc->pipe;
12822 if (INTEL_INFO(dev)->gen < 9 || !new_state->active)
12825 skl_ddb_get_hw_state(dev_priv, &hw_ddb);
12826 sw_ddb = &dev_priv->wm.skl_hw.ddb;
12829 for_each_plane(dev_priv, pipe, plane) {
12830 hw_entry = &hw_ddb.plane[pipe][plane];
12831 sw_entry = &sw_ddb->plane[pipe][plane];
12833 if (skl_ddb_entry_equal(hw_entry, sw_entry))
12836 DRM_ERROR("mismatch in DDB state pipe %c plane %d "
12837 "(expected (%u,%u), found (%u,%u))\n",
12838 pipe_name(pipe), plane + 1,
12839 sw_entry->start, sw_entry->end,
12840 hw_entry->start, hw_entry->end);
12844 hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
12845 sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
12847 if (!skl_ddb_entry_equal(hw_entry, sw_entry)) {
12848 DRM_ERROR("mismatch in DDB state pipe %c cursor "
12849 "(expected (%u,%u), found (%u,%u))\n",
12851 sw_entry->start, sw_entry->end,
12852 hw_entry->start, hw_entry->end);
12857 verify_connector_state(struct drm_device *dev, struct drm_crtc *crtc)
12859 struct drm_connector *connector;
12861 drm_for_each_connector(connector, dev) {
12862 struct drm_encoder *encoder = connector->encoder;
12863 struct drm_connector_state *state = connector->state;
12865 if (state->crtc != crtc)
12868 intel_connector_verify_state(to_intel_connector(connector));
12870 I915_STATE_WARN(state->best_encoder != encoder,
12871 "connector's atomic encoder doesn't match legacy encoder\n");
12876 verify_encoder_state(struct drm_device *dev)
12878 struct intel_encoder *encoder;
12879 struct intel_connector *connector;
12881 for_each_intel_encoder(dev, encoder) {
12882 bool enabled = false;
12885 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
12886 encoder->base.base.id,
12887 encoder->base.name);
12889 for_each_intel_connector(dev, connector) {
12890 if (connector->base.state->best_encoder != &encoder->base)
12894 I915_STATE_WARN(connector->base.state->crtc !=
12895 encoder->base.crtc,
12896 "connector's crtc doesn't match encoder crtc\n");
12899 I915_STATE_WARN(!!encoder->base.crtc != enabled,
12900 "encoder's enabled state mismatch "
12901 "(expected %i, found %i)\n",
12902 !!encoder->base.crtc, enabled);
12904 if (!encoder->base.crtc) {
12907 active = encoder->get_hw_state(encoder, &pipe);
12908 I915_STATE_WARN(active,
12909 "encoder detached but still enabled on pipe %c.\n",
12916 verify_crtc_state(struct drm_crtc *crtc,
12917 struct drm_crtc_state *old_crtc_state,
12918 struct drm_crtc_state *new_crtc_state)
12920 struct drm_device *dev = crtc->dev;
12921 struct drm_i915_private *dev_priv = dev->dev_private;
12922 struct intel_encoder *encoder;
12923 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12924 struct intel_crtc_state *pipe_config, *sw_config;
12925 struct drm_atomic_state *old_state;
12928 old_state = old_crtc_state->state;
12929 __drm_atomic_helper_crtc_destroy_state(old_crtc_state);
12930 pipe_config = to_intel_crtc_state(old_crtc_state);
12931 memset(pipe_config, 0, sizeof(*pipe_config));
12932 pipe_config->base.crtc = crtc;
12933 pipe_config->base.state = old_state;
12935 DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
12937 active = dev_priv->display.get_pipe_config(intel_crtc, pipe_config);
12939 /* hw state is inconsistent with the pipe quirk */
12940 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
12941 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
12942 active = new_crtc_state->active;
12944 I915_STATE_WARN(new_crtc_state->active != active,
12945 "crtc active state doesn't match with hw state "
12946 "(expected %i, found %i)\n", new_crtc_state->active, active);
12948 I915_STATE_WARN(intel_crtc->active != new_crtc_state->active,
12949 "transitional active state does not match atomic hw state "
12950 "(expected %i, found %i)\n", new_crtc_state->active, intel_crtc->active);
12952 for_each_encoder_on_crtc(dev, crtc, encoder) {
12955 active = encoder->get_hw_state(encoder, &pipe);
12956 I915_STATE_WARN(active != new_crtc_state->active,
12957 "[ENCODER:%i] active %i with crtc active %i\n",
12958 encoder->base.base.id, active, new_crtc_state->active);
12960 I915_STATE_WARN(active && intel_crtc->pipe != pipe,
12961 "Encoder connected to wrong pipe %c\n",
12965 encoder->get_config(encoder, pipe_config);
12968 if (!new_crtc_state->active)
12971 intel_pipe_config_sanity_check(dev_priv, pipe_config);
12973 sw_config = to_intel_crtc_state(crtc->state);
12974 if (!intel_pipe_config_compare(dev, sw_config,
12975 pipe_config, false)) {
12976 I915_STATE_WARN(1, "pipe state doesn't match!\n");
12977 intel_dump_pipe_config(intel_crtc, pipe_config,
12979 intel_dump_pipe_config(intel_crtc, sw_config,
12985 verify_single_dpll_state(struct drm_i915_private *dev_priv,
12986 struct intel_shared_dpll *pll,
12987 struct drm_crtc *crtc,
12988 struct drm_crtc_state *new_state)
12990 struct intel_dpll_hw_state dpll_hw_state;
12991 unsigned crtc_mask;
12994 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
12996 DRM_DEBUG_KMS("%s\n", pll->name);
12998 active = pll->funcs.get_hw_state(dev_priv, pll, &dpll_hw_state);
13000 if (!(pll->flags & INTEL_DPLL_ALWAYS_ON)) {
13001 I915_STATE_WARN(!pll->on && pll->active_mask,
13002 "pll in active use but not on in sw tracking\n");
13003 I915_STATE_WARN(pll->on && !pll->active_mask,
13004 "pll is on but not used by any active crtc\n");
13005 I915_STATE_WARN(pll->on != active,
13006 "pll on state mismatch (expected %i, found %i)\n",
13011 I915_STATE_WARN(pll->active_mask & ~pll->config.crtc_mask,
13012 "more active pll users than references: %x vs %x\n",
13013 pll->active_mask, pll->config.crtc_mask);
13018 crtc_mask = 1 << drm_crtc_index(crtc);
13020 if (new_state->active)
13021 I915_STATE_WARN(!(pll->active_mask & crtc_mask),
13022 "pll active mismatch (expected pipe %c in active mask 0x%02x)\n",
13023 pipe_name(drm_crtc_index(crtc)), pll->active_mask);
13025 I915_STATE_WARN(pll->active_mask & crtc_mask,
13026 "pll active mismatch (didn't expect pipe %c in active mask 0x%02x)\n",
13027 pipe_name(drm_crtc_index(crtc)), pll->active_mask);
13029 I915_STATE_WARN(!(pll->config.crtc_mask & crtc_mask),
13030 "pll enabled crtcs mismatch (expected 0x%x in 0x%02x)\n",
13031 crtc_mask, pll->config.crtc_mask);
13033 I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state,
13035 sizeof(dpll_hw_state)),
13036 "pll hw state mismatch\n");
13040 verify_shared_dpll_state(struct drm_device *dev, struct drm_crtc *crtc,
13041 struct drm_crtc_state *old_crtc_state,
13042 struct drm_crtc_state *new_crtc_state)
13044 struct drm_i915_private *dev_priv = dev->dev_private;
13045 struct intel_crtc_state *old_state = to_intel_crtc_state(old_crtc_state);
13046 struct intel_crtc_state *new_state = to_intel_crtc_state(new_crtc_state);
13048 if (new_state->shared_dpll)
13049 verify_single_dpll_state(dev_priv, new_state->shared_dpll, crtc, new_crtc_state);
13051 if (old_state->shared_dpll &&
13052 old_state->shared_dpll != new_state->shared_dpll) {
13053 unsigned crtc_mask = 1 << drm_crtc_index(crtc);
13054 struct intel_shared_dpll *pll = old_state->shared_dpll;
13056 I915_STATE_WARN(pll->active_mask & crtc_mask,
13057 "pll active mismatch (didn't expect pipe %c in active mask)\n",
13058 pipe_name(drm_crtc_index(crtc)));
13059 I915_STATE_WARN(pll->config.crtc_mask & crtc_mask,
13060 "pll enabled crtcs mismatch (found %x in enabled mask)\n",
13061 pipe_name(drm_crtc_index(crtc)));
13066 intel_modeset_verify_crtc(struct drm_crtc *crtc,
13067 struct drm_crtc_state *old_state,
13068 struct drm_crtc_state *new_state)
13070 if (!needs_modeset(new_state) &&
13071 !to_intel_crtc_state(new_state)->update_pipe)
13074 verify_wm_state(crtc, new_state);
13075 verify_connector_state(crtc->dev, crtc);
13076 verify_crtc_state(crtc, old_state, new_state);
13077 verify_shared_dpll_state(crtc->dev, crtc, old_state, new_state);
13081 verify_disabled_dpll_state(struct drm_device *dev)
13083 struct drm_i915_private *dev_priv = dev->dev_private;
13086 for (i = 0; i < dev_priv->num_shared_dpll; i++)
13087 verify_single_dpll_state(dev_priv, &dev_priv->shared_dplls[i], NULL, NULL);
13091 intel_modeset_verify_disabled(struct drm_device *dev)
13093 verify_encoder_state(dev);
13094 verify_connector_state(dev, NULL);
13095 verify_disabled_dpll_state(dev);
13098 static void update_scanline_offset(struct intel_crtc *crtc)
13100 struct drm_device *dev = crtc->base.dev;
13103 * The scanline counter increments at the leading edge of hsync.
13105 * On most platforms it starts counting from vtotal-1 on the
13106 * first active line. That means the scanline counter value is
13107 * always one less than what we would expect. Ie. just after
13108 * start of vblank, which also occurs at start of hsync (on the
13109 * last active line), the scanline counter will read vblank_start-1.
13111 * On gen2 the scanline counter starts counting from 1 instead
13112 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
13113 * to keep the value positive), instead of adding one.
13115 * On HSW+ the behaviour of the scanline counter depends on the output
13116 * type. For DP ports it behaves like most other platforms, but on HDMI
13117 * there's an extra 1 line difference. So we need to add two instead of
13118 * one to the value.
13120 if (IS_GEN2(dev)) {
13121 const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
13124 vtotal = adjusted_mode->crtc_vtotal;
13125 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
13128 crtc->scanline_offset = vtotal - 1;
13129 } else if (HAS_DDI(dev) &&
13130 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
13131 crtc->scanline_offset = 2;
13133 crtc->scanline_offset = 1;
13136 static void intel_modeset_clear_plls(struct drm_atomic_state *state)
13138 struct drm_device *dev = state->dev;
13139 struct drm_i915_private *dev_priv = to_i915(dev);
13140 struct intel_shared_dpll_config *shared_dpll = NULL;
13141 struct drm_crtc *crtc;
13142 struct drm_crtc_state *crtc_state;
13145 if (!dev_priv->display.crtc_compute_clock)
13148 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13149 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13150 struct intel_shared_dpll *old_dpll =
13151 to_intel_crtc_state(crtc->state)->shared_dpll;
13153 if (!needs_modeset(crtc_state))
13156 to_intel_crtc_state(crtc_state)->shared_dpll = NULL;
13162 shared_dpll = intel_atomic_get_shared_dpll_state(state);
13164 intel_shared_dpll_config_put(shared_dpll, old_dpll, intel_crtc);
13169 * This implements the workaround described in the "notes" section of the mode
13170 * set sequence documentation. When going from no pipes or single pipe to
13171 * multiple pipes, and planes are enabled after the pipe, we need to wait at
13172 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
13174 static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
13176 struct drm_crtc_state *crtc_state;
13177 struct intel_crtc *intel_crtc;
13178 struct drm_crtc *crtc;
13179 struct intel_crtc_state *first_crtc_state = NULL;
13180 struct intel_crtc_state *other_crtc_state = NULL;
13181 enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
13184 /* look at all crtc's that are going to be enabled in during modeset */
13185 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13186 intel_crtc = to_intel_crtc(crtc);
13188 if (!crtc_state->active || !needs_modeset(crtc_state))
13191 if (first_crtc_state) {
13192 other_crtc_state = to_intel_crtc_state(crtc_state);
13195 first_crtc_state = to_intel_crtc_state(crtc_state);
13196 first_pipe = intel_crtc->pipe;
13200 /* No workaround needed? */
13201 if (!first_crtc_state)
13204 /* w/a possibly needed, check how many crtc's are already enabled. */
13205 for_each_intel_crtc(state->dev, intel_crtc) {
13206 struct intel_crtc_state *pipe_config;
13208 pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
13209 if (IS_ERR(pipe_config))
13210 return PTR_ERR(pipe_config);
13212 pipe_config->hsw_workaround_pipe = INVALID_PIPE;
13214 if (!pipe_config->base.active ||
13215 needs_modeset(&pipe_config->base))
13218 /* 2 or more enabled crtcs means no need for w/a */
13219 if (enabled_pipe != INVALID_PIPE)
13222 enabled_pipe = intel_crtc->pipe;
13225 if (enabled_pipe != INVALID_PIPE)
13226 first_crtc_state->hsw_workaround_pipe = enabled_pipe;
13227 else if (other_crtc_state)
13228 other_crtc_state->hsw_workaround_pipe = first_pipe;
13233 static int intel_modeset_all_pipes(struct drm_atomic_state *state)
13235 struct drm_crtc *crtc;
13236 struct drm_crtc_state *crtc_state;
13239 /* add all active pipes to the state */
13240 for_each_crtc(state->dev, crtc) {
13241 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13242 if (IS_ERR(crtc_state))
13243 return PTR_ERR(crtc_state);
13245 if (!crtc_state->active || needs_modeset(crtc_state))
13248 crtc_state->mode_changed = true;
13250 ret = drm_atomic_add_affected_connectors(state, crtc);
13254 ret = drm_atomic_add_affected_planes(state, crtc);
13262 static int intel_modeset_checks(struct drm_atomic_state *state)
13264 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13265 struct drm_i915_private *dev_priv = state->dev->dev_private;
13266 struct drm_crtc *crtc;
13267 struct drm_crtc_state *crtc_state;
13270 if (!check_digital_port_conflicts(state)) {
13271 DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
13275 intel_state->modeset = true;
13276 intel_state->active_crtcs = dev_priv->active_crtcs;
13278 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13279 if (crtc_state->active)
13280 intel_state->active_crtcs |= 1 << i;
13282 intel_state->active_crtcs &= ~(1 << i);
13286 * See if the config requires any additional preparation, e.g.
13287 * to adjust global state with pipes off. We need to do this
13288 * here so we can get the modeset_pipe updated config for the new
13289 * mode set on this crtc. For other crtcs we need to use the
13290 * adjusted_mode bits in the crtc directly.
13292 if (dev_priv->display.modeset_calc_cdclk) {
13293 ret = dev_priv->display.modeset_calc_cdclk(state);
13295 if (!ret && intel_state->dev_cdclk != dev_priv->cdclk_freq)
13296 ret = intel_modeset_all_pipes(state);
13301 DRM_DEBUG_KMS("New cdclk calculated to be atomic %u, actual %u\n",
13302 intel_state->cdclk, intel_state->dev_cdclk);
13304 to_intel_atomic_state(state)->cdclk = dev_priv->atomic_cdclk_freq;
13306 intel_modeset_clear_plls(state);
13308 if (IS_HASWELL(dev_priv))
13309 return haswell_mode_set_planes_workaround(state);
13315 * Handle calculation of various watermark data at the end of the atomic check
13316 * phase. The code here should be run after the per-crtc and per-plane 'check'
13317 * handlers to ensure that all derived state has been updated.
13319 static void calc_watermark_data(struct drm_atomic_state *state)
13321 struct drm_device *dev = state->dev;
13322 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13323 struct drm_crtc *crtc;
13324 struct drm_crtc_state *cstate;
13325 struct drm_plane *plane;
13326 struct drm_plane_state *pstate;
13329 * Calculate watermark configuration details now that derived
13330 * plane/crtc state is all properly updated.
13332 drm_for_each_crtc(crtc, dev) {
13333 cstate = drm_atomic_get_existing_crtc_state(state, crtc) ?:
13336 if (cstate->active)
13337 intel_state->wm_config.num_pipes_active++;
13339 drm_for_each_legacy_plane(plane, dev) {
13340 pstate = drm_atomic_get_existing_plane_state(state, plane) ?:
13343 if (!to_intel_plane_state(pstate)->visible)
13346 intel_state->wm_config.sprites_enabled = true;
13347 if (pstate->crtc_w != pstate->src_w >> 16 ||
13348 pstate->crtc_h != pstate->src_h >> 16)
13349 intel_state->wm_config.sprites_scaled = true;
13354 * intel_atomic_check - validate state object
13356 * @state: state to validate
13358 static int intel_atomic_check(struct drm_device *dev,
13359 struct drm_atomic_state *state)
13361 struct drm_i915_private *dev_priv = to_i915(dev);
13362 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13363 struct drm_crtc *crtc;
13364 struct drm_crtc_state *crtc_state;
13366 bool any_ms = false;
13368 ret = drm_atomic_helper_check_modeset(dev, state);
13372 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13373 struct intel_crtc_state *pipe_config =
13374 to_intel_crtc_state(crtc_state);
13376 /* Catch I915_MODE_FLAG_INHERITED */
13377 if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
13378 crtc_state->mode_changed = true;
13380 if (!crtc_state->enable) {
13381 if (needs_modeset(crtc_state))
13386 if (!needs_modeset(crtc_state))
13389 /* FIXME: For only active_changed we shouldn't need to do any
13390 * state recomputation at all. */
13392 ret = drm_atomic_add_affected_connectors(state, crtc);
13396 ret = intel_modeset_pipe_config(crtc, pipe_config);
13400 if (i915.fastboot &&
13401 intel_pipe_config_compare(dev,
13402 to_intel_crtc_state(crtc->state),
13403 pipe_config, true)) {
13404 crtc_state->mode_changed = false;
13405 to_intel_crtc_state(crtc_state)->update_pipe = true;
13408 if (needs_modeset(crtc_state)) {
13411 ret = drm_atomic_add_affected_planes(state, crtc);
13416 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
13417 needs_modeset(crtc_state) ?
13418 "[modeset]" : "[fastset]");
13422 ret = intel_modeset_checks(state);
13427 intel_state->cdclk = dev_priv->cdclk_freq;
13429 ret = drm_atomic_helper_check_planes(dev, state);
13433 intel_fbc_choose_crtc(dev_priv, state);
13434 calc_watermark_data(state);
13439 static int intel_atomic_prepare_commit(struct drm_device *dev,
13440 struct drm_atomic_state *state,
13443 struct drm_i915_private *dev_priv = dev->dev_private;
13444 struct drm_plane_state *plane_state;
13445 struct drm_crtc_state *crtc_state;
13446 struct drm_plane *plane;
13447 struct drm_crtc *crtc;
13451 DRM_DEBUG_KMS("i915 does not yet support nonblocking commit\n");
13455 for_each_crtc_in_state(state, crtc, crtc_state, i) {
13456 if (state->legacy_cursor_update)
13459 ret = intel_crtc_wait_for_pending_flips(crtc);
13463 if (atomic_read(&to_intel_crtc(crtc)->unpin_work_count) >= 2)
13464 flush_workqueue(dev_priv->wq);
13467 ret = mutex_lock_interruptible(&dev->struct_mutex);
13471 ret = drm_atomic_helper_prepare_planes(dev, state);
13472 mutex_unlock(&dev->struct_mutex);
13474 if (!ret && !nonblock) {
13475 for_each_plane_in_state(state, plane, plane_state, i) {
13476 struct intel_plane_state *intel_plane_state =
13477 to_intel_plane_state(plane_state);
13479 if (!intel_plane_state->wait_req)
13482 ret = __i915_wait_request(intel_plane_state->wait_req,
13485 /* Any hang should be swallowed by the wait */
13486 WARN_ON(ret == -EIO);
13487 mutex_lock(&dev->struct_mutex);
13488 drm_atomic_helper_cleanup_planes(dev, state);
13489 mutex_unlock(&dev->struct_mutex);
13498 static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
13499 struct drm_i915_private *dev_priv,
13500 unsigned crtc_mask)
13502 unsigned last_vblank_count[I915_MAX_PIPES];
13509 for_each_pipe(dev_priv, pipe) {
13510 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
13512 if (!((1 << pipe) & crtc_mask))
13515 ret = drm_crtc_vblank_get(crtc);
13516 if (WARN_ON(ret != 0)) {
13517 crtc_mask &= ~(1 << pipe);
13521 last_vblank_count[pipe] = drm_crtc_vblank_count(crtc);
13524 for_each_pipe(dev_priv, pipe) {
13525 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
13528 if (!((1 << pipe) & crtc_mask))
13531 lret = wait_event_timeout(dev->vblank[pipe].queue,
13532 last_vblank_count[pipe] !=
13533 drm_crtc_vblank_count(crtc),
13534 msecs_to_jiffies(50));
13536 WARN(!lret, "pipe %c vblank wait timed out\n", pipe_name(pipe));
13538 drm_crtc_vblank_put(crtc);
13542 static bool needs_vblank_wait(struct intel_crtc_state *crtc_state)
13544 /* fb updated, need to unpin old fb */
13545 if (crtc_state->fb_changed)
13548 /* wm changes, need vblank before final wm's */
13549 if (crtc_state->update_wm_post)
13553 * cxsr is re-enabled after vblank.
13554 * This is already handled by crtc_state->update_wm_post,
13555 * but added for clarity.
13557 if (crtc_state->disable_cxsr)
13564 * intel_atomic_commit - commit validated state object
13566 * @state: the top-level driver state object
13567 * @nonblock: nonblocking commit
13569 * This function commits a top-level state object that has been validated
13570 * with drm_atomic_helper_check().
13572 * FIXME: Atomic modeset support for i915 is not yet complete. At the moment
13573 * we can only handle plane-related operations and do not yet support
13574 * nonblocking commit.
13577 * Zero for success or -errno.
13579 static int intel_atomic_commit(struct drm_device *dev,
13580 struct drm_atomic_state *state,
13583 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
13584 struct drm_i915_private *dev_priv = dev->dev_private;
13585 struct drm_crtc_state *old_crtc_state;
13586 struct drm_crtc *crtc;
13587 struct intel_crtc_state *intel_cstate;
13589 bool hw_check = intel_state->modeset;
13590 unsigned long put_domains[I915_MAX_PIPES] = {};
13591 unsigned crtc_vblank_mask = 0;
13593 ret = intel_atomic_prepare_commit(dev, state, nonblock);
13595 DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
13599 drm_atomic_helper_swap_state(dev, state);
13600 dev_priv->wm.config = intel_state->wm_config;
13601 intel_shared_dpll_commit(state);
13603 if (intel_state->modeset) {
13604 memcpy(dev_priv->min_pixclk, intel_state->min_pixclk,
13605 sizeof(intel_state->min_pixclk));
13606 dev_priv->active_crtcs = intel_state->active_crtcs;
13607 dev_priv->atomic_cdclk_freq = intel_state->cdclk;
13609 intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
13612 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13613 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13615 if (needs_modeset(crtc->state) ||
13616 to_intel_crtc_state(crtc->state)->update_pipe) {
13619 put_domains[to_intel_crtc(crtc)->pipe] =
13620 modeset_get_crtc_power_domains(crtc,
13621 to_intel_crtc_state(crtc->state));
13624 if (!needs_modeset(crtc->state))
13627 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
13629 if (old_crtc_state->active) {
13630 intel_crtc_disable_planes(crtc, old_crtc_state->plane_mask);
13631 dev_priv->display.crtc_disable(crtc);
13632 intel_crtc->active = false;
13633 intel_fbc_disable(intel_crtc);
13634 intel_disable_shared_dpll(intel_crtc);
13637 * Underruns don't always raise
13638 * interrupts, so check manually.
13640 intel_check_cpu_fifo_underruns(dev_priv);
13641 intel_check_pch_fifo_underruns(dev_priv);
13643 if (!crtc->state->active)
13644 intel_update_watermarks(crtc);
13648 /* Only after disabling all output pipelines that will be changed can we
13649 * update the the output configuration. */
13650 intel_modeset_update_crtc_state(state);
13652 if (intel_state->modeset) {
13653 drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
13655 if (dev_priv->display.modeset_commit_cdclk &&
13656 intel_state->dev_cdclk != dev_priv->cdclk_freq)
13657 dev_priv->display.modeset_commit_cdclk(state);
13659 intel_modeset_verify_disabled(dev);
13662 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
13663 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13664 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13665 bool modeset = needs_modeset(crtc->state);
13666 struct intel_crtc_state *pipe_config =
13667 to_intel_crtc_state(crtc->state);
13668 bool update_pipe = !modeset && pipe_config->update_pipe;
13670 if (modeset && crtc->state->active) {
13671 update_scanline_offset(to_intel_crtc(crtc));
13672 dev_priv->display.crtc_enable(crtc);
13676 intel_pre_plane_update(to_intel_crtc_state(old_crtc_state));
13678 if (crtc->state->active &&
13679 drm_atomic_get_existing_plane_state(state, crtc->primary))
13680 intel_fbc_enable(intel_crtc);
13682 if (crtc->state->active &&
13683 (crtc->state->planes_changed || update_pipe))
13684 drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
13686 if (pipe_config->base.active && needs_vblank_wait(pipe_config))
13687 crtc_vblank_mask |= 1 << i;
13690 /* FIXME: add subpixel order */
13692 if (!state->legacy_cursor_update)
13693 intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
13696 * Now that the vblank has passed, we can go ahead and program the
13697 * optimal watermarks on platforms that need two-step watermark
13700 * TODO: Move this (and other cleanup) to an async worker eventually.
13702 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13703 intel_cstate = to_intel_crtc_state(crtc->state);
13705 if (dev_priv->display.optimize_watermarks)
13706 dev_priv->display.optimize_watermarks(intel_cstate);
13709 for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
13710 intel_post_plane_update(to_intel_crtc_state(old_crtc_state));
13712 if (put_domains[i])
13713 modeset_put_power_domains(dev_priv, put_domains[i]);
13715 intel_modeset_verify_crtc(crtc, old_crtc_state, crtc->state);
13718 if (intel_state->modeset)
13719 intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET);
13721 mutex_lock(&dev->struct_mutex);
13722 drm_atomic_helper_cleanup_planes(dev, state);
13723 mutex_unlock(&dev->struct_mutex);
13725 drm_atomic_state_free(state);
13727 /* As one of the primary mmio accessors, KMS has a high likelihood
13728 * of triggering bugs in unclaimed access. After we finish
13729 * modesetting, see if an error has been flagged, and if so
13730 * enable debugging for the next modeset - and hope we catch
13733 * XXX note that we assume display power is on at this point.
13734 * This might hold true now but we need to add pm helper to check
13735 * unclaimed only when the hardware is on, as atomic commits
13736 * can happen also when the device is completely off.
13738 intel_uncore_arm_unclaimed_mmio_detection(dev_priv);
13743 void intel_crtc_restore_mode(struct drm_crtc *crtc)
13745 struct drm_device *dev = crtc->dev;
13746 struct drm_atomic_state *state;
13747 struct drm_crtc_state *crtc_state;
13750 state = drm_atomic_state_alloc(dev);
13752 DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory",
13757 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
13760 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13761 ret = PTR_ERR_OR_ZERO(crtc_state);
13763 if (!crtc_state->active)
13766 crtc_state->mode_changed = true;
13767 ret = drm_atomic_commit(state);
13770 if (ret == -EDEADLK) {
13771 drm_atomic_state_clear(state);
13772 drm_modeset_backoff(state->acquire_ctx);
13778 drm_atomic_state_free(state);
13781 #undef for_each_intel_crtc_masked
13783 static const struct drm_crtc_funcs intel_crtc_funcs = {
13784 .gamma_set = drm_atomic_helper_legacy_gamma_set,
13785 .set_config = drm_atomic_helper_set_config,
13786 .set_property = drm_atomic_helper_crtc_set_property,
13787 .destroy = intel_crtc_destroy,
13788 .page_flip = intel_crtc_page_flip,
13789 .atomic_duplicate_state = intel_crtc_duplicate_state,
13790 .atomic_destroy_state = intel_crtc_destroy_state,
13794 * intel_prepare_plane_fb - Prepare fb for usage on plane
13795 * @plane: drm plane to prepare for
13796 * @fb: framebuffer to prepare for presentation
13798 * Prepares a framebuffer for usage on a display plane. Generally this
13799 * involves pinning the underlying object and updating the frontbuffer tracking
13800 * bits. Some older platforms need special physical address handling for
13803 * Must be called with struct_mutex held.
13805 * Returns 0 on success, negative error code on failure.
13808 intel_prepare_plane_fb(struct drm_plane *plane,
13809 const struct drm_plane_state *new_state)
13811 struct drm_device *dev = plane->dev;
13812 struct drm_framebuffer *fb = new_state->fb;
13813 struct intel_plane *intel_plane = to_intel_plane(plane);
13814 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
13815 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->state->fb);
13818 if (!obj && !old_obj)
13822 struct drm_crtc_state *crtc_state =
13823 drm_atomic_get_existing_crtc_state(new_state->state, plane->state->crtc);
13825 /* Big Hammer, we also need to ensure that any pending
13826 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
13827 * current scanout is retired before unpinning the old
13828 * framebuffer. Note that we rely on userspace rendering
13829 * into the buffer attached to the pipe they are waiting
13830 * on. If not, userspace generates a GPU hang with IPEHR
13831 * point to the MI_WAIT_FOR_EVENT.
13833 * This should only fail upon a hung GPU, in which case we
13834 * can safely continue.
13836 if (needs_modeset(crtc_state))
13837 ret = i915_gem_object_wait_rendering(old_obj, true);
13839 /* GPU hangs should have been swallowed by the wait */
13840 WARN_ON(ret == -EIO);
13845 /* For framebuffer backed by dmabuf, wait for fence */
13846 if (obj && obj->base.dma_buf) {
13849 lret = reservation_object_wait_timeout_rcu(obj->base.dma_buf->resv,
13851 MAX_SCHEDULE_TIMEOUT);
13852 if (lret == -ERESTARTSYS)
13855 WARN(lret < 0, "waiting returns %li\n", lret);
13860 } else if (plane->type == DRM_PLANE_TYPE_CURSOR &&
13861 INTEL_INFO(dev)->cursor_needs_physical) {
13862 int align = IS_I830(dev) ? 16 * 1024 : 256;
13863 ret = i915_gem_object_attach_phys(obj, align);
13865 DRM_DEBUG_KMS("failed to attach phys object\n");
13867 ret = intel_pin_and_fence_fb_obj(fb, new_state->rotation);
13872 struct intel_plane_state *plane_state =
13873 to_intel_plane_state(new_state);
13875 i915_gem_request_assign(&plane_state->wait_req,
13876 obj->last_write_req);
13879 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
13886 * intel_cleanup_plane_fb - Cleans up an fb after plane use
13887 * @plane: drm plane to clean up for
13888 * @fb: old framebuffer that was on plane
13890 * Cleans up a framebuffer that has just been removed from a plane.
13892 * Must be called with struct_mutex held.
13895 intel_cleanup_plane_fb(struct drm_plane *plane,
13896 const struct drm_plane_state *old_state)
13898 struct drm_device *dev = plane->dev;
13899 struct intel_plane *intel_plane = to_intel_plane(plane);
13900 struct intel_plane_state *old_intel_state;
13901 struct drm_i915_gem_object *old_obj = intel_fb_obj(old_state->fb);
13902 struct drm_i915_gem_object *obj = intel_fb_obj(plane->state->fb);
13904 old_intel_state = to_intel_plane_state(old_state);
13906 if (!obj && !old_obj)
13909 if (old_obj && (plane->type != DRM_PLANE_TYPE_CURSOR ||
13910 !INTEL_INFO(dev)->cursor_needs_physical))
13911 intel_unpin_fb_obj(old_state->fb, old_state->rotation);
13913 /* prepare_fb aborted? */
13914 if ((old_obj && (old_obj->frontbuffer_bits & intel_plane->frontbuffer_bit)) ||
13915 (obj && !(obj->frontbuffer_bits & intel_plane->frontbuffer_bit)))
13916 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
13918 i915_gem_request_assign(&old_intel_state->wait_req, NULL);
13922 skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
13925 struct drm_device *dev;
13926 struct drm_i915_private *dev_priv;
13927 int crtc_clock, cdclk;
13929 if (!intel_crtc || !crtc_state->base.enable)
13930 return DRM_PLANE_HELPER_NO_SCALING;
13932 dev = intel_crtc->base.dev;
13933 dev_priv = dev->dev_private;
13934 crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
13935 cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
13937 if (WARN_ON_ONCE(!crtc_clock || cdclk < crtc_clock))
13938 return DRM_PLANE_HELPER_NO_SCALING;
13941 * skl max scale is lower of:
13942 * close to 3 but not 3, -1 is for that purpose
13946 max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
13952 intel_check_primary_plane(struct drm_plane *plane,
13953 struct intel_crtc_state *crtc_state,
13954 struct intel_plane_state *state)
13956 struct drm_crtc *crtc = state->base.crtc;
13957 struct drm_framebuffer *fb = state->base.fb;
13958 int min_scale = DRM_PLANE_HELPER_NO_SCALING;
13959 int max_scale = DRM_PLANE_HELPER_NO_SCALING;
13960 bool can_position = false;
13962 if (INTEL_INFO(plane->dev)->gen >= 9) {
13963 /* use scaler when colorkey is not required */
13964 if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
13966 max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
13968 can_position = true;
13971 return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
13972 &state->dst, &state->clip,
13973 min_scale, max_scale,
13974 can_position, true,
13978 static void intel_begin_crtc_commit(struct drm_crtc *crtc,
13979 struct drm_crtc_state *old_crtc_state)
13981 struct drm_device *dev = crtc->dev;
13982 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13983 struct intel_crtc_state *old_intel_state =
13984 to_intel_crtc_state(old_crtc_state);
13985 bool modeset = needs_modeset(crtc->state);
13987 /* Perform vblank evasion around commit operation */
13988 intel_pipe_update_start(intel_crtc);
13993 if (crtc->state->color_mgmt_changed || to_intel_crtc_state(crtc->state)->update_pipe) {
13994 intel_color_set_csc(crtc->state);
13995 intel_color_load_luts(crtc->state);
13998 if (to_intel_crtc_state(crtc->state)->update_pipe)
13999 intel_update_pipe_config(intel_crtc, old_intel_state);
14000 else if (INTEL_INFO(dev)->gen >= 9)
14001 skl_detach_scalers(intel_crtc);
14004 static void intel_finish_crtc_commit(struct drm_crtc *crtc,
14005 struct drm_crtc_state *old_crtc_state)
14007 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14009 intel_pipe_update_end(intel_crtc);
14013 * intel_plane_destroy - destroy a plane
14014 * @plane: plane to destroy
14016 * Common destruction function for all types of planes (primary, cursor,
14019 void intel_plane_destroy(struct drm_plane *plane)
14021 struct intel_plane *intel_plane = to_intel_plane(plane);
14022 drm_plane_cleanup(plane);
14023 kfree(intel_plane);
14026 const struct drm_plane_funcs intel_plane_funcs = {
14027 .update_plane = drm_atomic_helper_update_plane,
14028 .disable_plane = drm_atomic_helper_disable_plane,
14029 .destroy = intel_plane_destroy,
14030 .set_property = drm_atomic_helper_plane_set_property,
14031 .atomic_get_property = intel_plane_atomic_get_property,
14032 .atomic_set_property = intel_plane_atomic_set_property,
14033 .atomic_duplicate_state = intel_plane_duplicate_state,
14034 .atomic_destroy_state = intel_plane_destroy_state,
14038 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
14041 struct intel_plane *primary = NULL;
14042 struct intel_plane_state *state = NULL;
14043 const uint32_t *intel_primary_formats;
14044 unsigned int num_formats;
14047 primary = kzalloc(sizeof(*primary), GFP_KERNEL);
14051 state = intel_create_plane_state(&primary->base);
14054 primary->base.state = &state->base;
14056 primary->can_scale = false;
14057 primary->max_downscale = 1;
14058 if (INTEL_INFO(dev)->gen >= 9) {
14059 primary->can_scale = true;
14060 state->scaler_id = -1;
14062 primary->pipe = pipe;
14063 primary->plane = pipe;
14064 primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
14065 primary->check_plane = intel_check_primary_plane;
14066 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
14067 primary->plane = !pipe;
14069 if (INTEL_INFO(dev)->gen >= 9) {
14070 intel_primary_formats = skl_primary_formats;
14071 num_formats = ARRAY_SIZE(skl_primary_formats);
14073 primary->update_plane = skylake_update_primary_plane;
14074 primary->disable_plane = skylake_disable_primary_plane;
14075 } else if (HAS_PCH_SPLIT(dev)) {
14076 intel_primary_formats = i965_primary_formats;
14077 num_formats = ARRAY_SIZE(i965_primary_formats);
14079 primary->update_plane = ironlake_update_primary_plane;
14080 primary->disable_plane = i9xx_disable_primary_plane;
14081 } else if (INTEL_INFO(dev)->gen >= 4) {
14082 intel_primary_formats = i965_primary_formats;
14083 num_formats = ARRAY_SIZE(i965_primary_formats);
14085 primary->update_plane = i9xx_update_primary_plane;
14086 primary->disable_plane = i9xx_disable_primary_plane;
14088 intel_primary_formats = i8xx_primary_formats;
14089 num_formats = ARRAY_SIZE(i8xx_primary_formats);
14091 primary->update_plane = i9xx_update_primary_plane;
14092 primary->disable_plane = i9xx_disable_primary_plane;
14095 ret = drm_universal_plane_init(dev, &primary->base, 0,
14096 &intel_plane_funcs,
14097 intel_primary_formats, num_formats,
14098 DRM_PLANE_TYPE_PRIMARY, NULL);
14102 if (INTEL_INFO(dev)->gen >= 4)
14103 intel_create_rotation_property(dev, primary);
14105 drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
14107 return &primary->base;
14116 void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
14118 if (!dev->mode_config.rotation_property) {
14119 unsigned long flags = BIT(DRM_ROTATE_0) |
14120 BIT(DRM_ROTATE_180);
14122 if (INTEL_INFO(dev)->gen >= 9)
14123 flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
14125 dev->mode_config.rotation_property =
14126 drm_mode_create_rotation_property(dev, flags);
14128 if (dev->mode_config.rotation_property)
14129 drm_object_attach_property(&plane->base.base,
14130 dev->mode_config.rotation_property,
14131 plane->base.state->rotation);
14135 intel_check_cursor_plane(struct drm_plane *plane,
14136 struct intel_crtc_state *crtc_state,
14137 struct intel_plane_state *state)
14139 struct drm_crtc *crtc = crtc_state->base.crtc;
14140 struct drm_framebuffer *fb = state->base.fb;
14141 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
14142 enum pipe pipe = to_intel_plane(plane)->pipe;
14146 ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
14147 &state->dst, &state->clip,
14148 DRM_PLANE_HELPER_NO_SCALING,
14149 DRM_PLANE_HELPER_NO_SCALING,
14150 true, true, &state->visible);
14154 /* if we want to turn off the cursor ignore width and height */
14158 /* Check for which cursor types we support */
14159 if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
14160 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
14161 state->base.crtc_w, state->base.crtc_h);
14165 stride = roundup_pow_of_two(state->base.crtc_w) * 4;
14166 if (obj->base.size < stride * state->base.crtc_h) {
14167 DRM_DEBUG_KMS("buffer is too small\n");
14171 if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
14172 DRM_DEBUG_KMS("cursor cannot be tiled\n");
14177 * There's something wrong with the cursor on CHV pipe C.
14178 * If it straddles the left edge of the screen then
14179 * moving it away from the edge or disabling it often
14180 * results in a pipe underrun, and often that can lead to
14181 * dead pipe (constant underrun reported, and it scans
14182 * out just a solid color). To recover from that, the
14183 * display power well must be turned off and on again.
14184 * Refuse the put the cursor into that compromised position.
14186 if (IS_CHERRYVIEW(plane->dev) && pipe == PIPE_C &&
14187 state->visible && state->base.crtc_x < 0) {
14188 DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
14196 intel_disable_cursor_plane(struct drm_plane *plane,
14197 struct drm_crtc *crtc)
14199 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14201 intel_crtc->cursor_addr = 0;
14202 intel_crtc_update_cursor(crtc, NULL);
14206 intel_update_cursor_plane(struct drm_plane *plane,
14207 const struct intel_crtc_state *crtc_state,
14208 const struct intel_plane_state *state)
14210 struct drm_crtc *crtc = crtc_state->base.crtc;
14211 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
14212 struct drm_device *dev = plane->dev;
14213 struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
14218 else if (!INTEL_INFO(dev)->cursor_needs_physical)
14219 addr = i915_gem_obj_ggtt_offset(obj);
14221 addr = obj->phys_handle->busaddr;
14223 intel_crtc->cursor_addr = addr;
14224 intel_crtc_update_cursor(crtc, state);
14227 static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
14230 struct intel_plane *cursor = NULL;
14231 struct intel_plane_state *state = NULL;
14234 cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
14238 state = intel_create_plane_state(&cursor->base);
14241 cursor->base.state = &state->base;
14243 cursor->can_scale = false;
14244 cursor->max_downscale = 1;
14245 cursor->pipe = pipe;
14246 cursor->plane = pipe;
14247 cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
14248 cursor->check_plane = intel_check_cursor_plane;
14249 cursor->update_plane = intel_update_cursor_plane;
14250 cursor->disable_plane = intel_disable_cursor_plane;
14252 ret = drm_universal_plane_init(dev, &cursor->base, 0,
14253 &intel_plane_funcs,
14254 intel_cursor_formats,
14255 ARRAY_SIZE(intel_cursor_formats),
14256 DRM_PLANE_TYPE_CURSOR, NULL);
14260 if (INTEL_INFO(dev)->gen >= 4) {
14261 if (!dev->mode_config.rotation_property)
14262 dev->mode_config.rotation_property =
14263 drm_mode_create_rotation_property(dev,
14264 BIT(DRM_ROTATE_0) |
14265 BIT(DRM_ROTATE_180));
14266 if (dev->mode_config.rotation_property)
14267 drm_object_attach_property(&cursor->base.base,
14268 dev->mode_config.rotation_property,
14269 state->base.rotation);
14272 if (INTEL_INFO(dev)->gen >=9)
14273 state->scaler_id = -1;
14275 drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
14277 return &cursor->base;
14286 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
14287 struct intel_crtc_state *crtc_state)
14290 struct intel_scaler *intel_scaler;
14291 struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
14293 for (i = 0; i < intel_crtc->num_scalers; i++) {
14294 intel_scaler = &scaler_state->scalers[i];
14295 intel_scaler->in_use = 0;
14296 intel_scaler->mode = PS_SCALER_MODE_DYN;
14299 scaler_state->scaler_id = -1;
14302 static void intel_crtc_init(struct drm_device *dev, int pipe)
14304 struct drm_i915_private *dev_priv = dev->dev_private;
14305 struct intel_crtc *intel_crtc;
14306 struct intel_crtc_state *crtc_state = NULL;
14307 struct drm_plane *primary = NULL;
14308 struct drm_plane *cursor = NULL;
14311 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
14312 if (intel_crtc == NULL)
14315 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
14318 intel_crtc->config = crtc_state;
14319 intel_crtc->base.state = &crtc_state->base;
14320 crtc_state->base.crtc = &intel_crtc->base;
14322 /* initialize shared scalers */
14323 if (INTEL_INFO(dev)->gen >= 9) {
14324 if (pipe == PIPE_C)
14325 intel_crtc->num_scalers = 1;
14327 intel_crtc->num_scalers = SKL_NUM_SCALERS;
14329 skl_init_scalers(dev, intel_crtc, crtc_state);
14332 primary = intel_primary_plane_create(dev, pipe);
14336 cursor = intel_cursor_plane_create(dev, pipe);
14340 ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
14341 cursor, &intel_crtc_funcs, NULL);
14346 * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
14347 * is hooked to pipe B. Hence we want plane A feeding pipe B.
14349 intel_crtc->pipe = pipe;
14350 intel_crtc->plane = pipe;
14351 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
14352 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
14353 intel_crtc->plane = !pipe;
14356 intel_crtc->cursor_base = ~0;
14357 intel_crtc->cursor_cntl = ~0;
14358 intel_crtc->cursor_size = ~0;
14360 intel_crtc->wm.cxsr_allowed = true;
14362 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
14363 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
14364 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
14365 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
14367 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
14369 intel_color_init(&intel_crtc->base);
14371 WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
14376 drm_plane_cleanup(primary);
14378 drm_plane_cleanup(cursor);
14383 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
14385 struct drm_encoder *encoder = connector->base.encoder;
14386 struct drm_device *dev = connector->base.dev;
14388 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
14390 if (!encoder || WARN_ON(!encoder->crtc))
14391 return INVALID_PIPE;
14393 return to_intel_crtc(encoder->crtc)->pipe;
14396 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
14397 struct drm_file *file)
14399 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
14400 struct drm_crtc *drmmode_crtc;
14401 struct intel_crtc *crtc;
14403 drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
14405 if (!drmmode_crtc) {
14406 DRM_ERROR("no such CRTC id\n");
14410 crtc = to_intel_crtc(drmmode_crtc);
14411 pipe_from_crtc_id->pipe = crtc->pipe;
14416 static int intel_encoder_clones(struct intel_encoder *encoder)
14418 struct drm_device *dev = encoder->base.dev;
14419 struct intel_encoder *source_encoder;
14420 int index_mask = 0;
14423 for_each_intel_encoder(dev, source_encoder) {
14424 if (encoders_cloneable(encoder, source_encoder))
14425 index_mask |= (1 << entry);
14433 static bool has_edp_a(struct drm_device *dev)
14435 struct drm_i915_private *dev_priv = dev->dev_private;
14437 if (!IS_MOBILE(dev))
14440 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
14443 if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
14449 static bool intel_crt_present(struct drm_device *dev)
14451 struct drm_i915_private *dev_priv = dev->dev_private;
14453 if (INTEL_INFO(dev)->gen >= 9)
14456 if (IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
14459 if (IS_CHERRYVIEW(dev))
14462 if (HAS_PCH_LPT_H(dev) && I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
14465 /* DDI E can't be used if DDI A requires 4 lanes */
14466 if (HAS_DDI(dev) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
14469 if (!dev_priv->vbt.int_crt_support)
14475 static void intel_setup_outputs(struct drm_device *dev)
14477 struct drm_i915_private *dev_priv = dev->dev_private;
14478 struct intel_encoder *encoder;
14479 bool dpd_is_edp = false;
14481 intel_lvds_init(dev);
14483 if (intel_crt_present(dev))
14484 intel_crt_init(dev);
14486 if (IS_BROXTON(dev)) {
14488 * FIXME: Broxton doesn't support port detection via the
14489 * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
14490 * detect the ports.
14492 intel_ddi_init(dev, PORT_A);
14493 intel_ddi_init(dev, PORT_B);
14494 intel_ddi_init(dev, PORT_C);
14496 intel_dsi_init(dev);
14497 } else if (HAS_DDI(dev)) {
14501 * Haswell uses DDI functions to detect digital outputs.
14502 * On SKL pre-D0 the strap isn't connected, so we assume
14505 found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
14506 /* WaIgnoreDDIAStrap: skl */
14507 if (found || IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
14508 intel_ddi_init(dev, PORT_A);
14510 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
14512 found = I915_READ(SFUSE_STRAP);
14514 if (found & SFUSE_STRAP_DDIB_DETECTED)
14515 intel_ddi_init(dev, PORT_B);
14516 if (found & SFUSE_STRAP_DDIC_DETECTED)
14517 intel_ddi_init(dev, PORT_C);
14518 if (found & SFUSE_STRAP_DDID_DETECTED)
14519 intel_ddi_init(dev, PORT_D);
14521 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
14523 if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
14524 (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
14525 dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
14526 dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
14527 intel_ddi_init(dev, PORT_E);
14529 } else if (HAS_PCH_SPLIT(dev)) {
14531 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
14533 if (has_edp_a(dev))
14534 intel_dp_init(dev, DP_A, PORT_A);
14536 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
14537 /* PCH SDVOB multiplex with HDMIB */
14538 found = intel_sdvo_init(dev, PCH_SDVOB, PORT_B);
14540 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
14541 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
14542 intel_dp_init(dev, PCH_DP_B, PORT_B);
14545 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
14546 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
14548 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
14549 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
14551 if (I915_READ(PCH_DP_C) & DP_DETECTED)
14552 intel_dp_init(dev, PCH_DP_C, PORT_C);
14554 if (I915_READ(PCH_DP_D) & DP_DETECTED)
14555 intel_dp_init(dev, PCH_DP_D, PORT_D);
14556 } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
14558 * The DP_DETECTED bit is the latched state of the DDC
14559 * SDA pin at boot. However since eDP doesn't require DDC
14560 * (no way to plug in a DP->HDMI dongle) the DDC pins for
14561 * eDP ports may have been muxed to an alternate function.
14562 * Thus we can't rely on the DP_DETECTED bit alone to detect
14563 * eDP ports. Consult the VBT as well as DP_DETECTED to
14564 * detect eDP ports.
14566 if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
14567 !intel_dp_is_edp(dev, PORT_B))
14568 intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
14569 if (I915_READ(VLV_DP_B) & DP_DETECTED ||
14570 intel_dp_is_edp(dev, PORT_B))
14571 intel_dp_init(dev, VLV_DP_B, PORT_B);
14573 if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
14574 !intel_dp_is_edp(dev, PORT_C))
14575 intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
14576 if (I915_READ(VLV_DP_C) & DP_DETECTED ||
14577 intel_dp_is_edp(dev, PORT_C))
14578 intel_dp_init(dev, VLV_DP_C, PORT_C);
14580 if (IS_CHERRYVIEW(dev)) {
14581 /* eDP not supported on port D, so don't check VBT */
14582 if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
14583 intel_hdmi_init(dev, CHV_HDMID, PORT_D);
14584 if (I915_READ(CHV_DP_D) & DP_DETECTED)
14585 intel_dp_init(dev, CHV_DP_D, PORT_D);
14588 intel_dsi_init(dev);
14589 } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
14590 bool found = false;
14592 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14593 DRM_DEBUG_KMS("probing SDVOB\n");
14594 found = intel_sdvo_init(dev, GEN3_SDVOB, PORT_B);
14595 if (!found && IS_G4X(dev)) {
14596 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
14597 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
14600 if (!found && IS_G4X(dev))
14601 intel_dp_init(dev, DP_B, PORT_B);
14604 /* Before G4X SDVOC doesn't have its own detect register */
14606 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14607 DRM_DEBUG_KMS("probing SDVOC\n");
14608 found = intel_sdvo_init(dev, GEN3_SDVOC, PORT_C);
14611 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
14614 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
14615 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
14618 intel_dp_init(dev, DP_C, PORT_C);
14622 (I915_READ(DP_D) & DP_DETECTED))
14623 intel_dp_init(dev, DP_D, PORT_D);
14624 } else if (IS_GEN2(dev))
14625 intel_dvo_init(dev);
14627 if (SUPPORTS_TV(dev))
14628 intel_tv_init(dev);
14630 intel_psr_init(dev);
14632 for_each_intel_encoder(dev, encoder) {
14633 encoder->base.possible_crtcs = encoder->crtc_mask;
14634 encoder->base.possible_clones =
14635 intel_encoder_clones(encoder);
14638 intel_init_pch_refclk(dev);
14640 drm_helper_move_panel_connectors_to_head(dev);
14643 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
14645 struct drm_device *dev = fb->dev;
14646 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14648 drm_framebuffer_cleanup(fb);
14649 mutex_lock(&dev->struct_mutex);
14650 WARN_ON(!intel_fb->obj->framebuffer_references--);
14651 drm_gem_object_unreference(&intel_fb->obj->base);
14652 mutex_unlock(&dev->struct_mutex);
14656 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
14657 struct drm_file *file,
14658 unsigned int *handle)
14660 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14661 struct drm_i915_gem_object *obj = intel_fb->obj;
14663 if (obj->userptr.mm) {
14664 DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
14668 return drm_gem_handle_create(file, &obj->base, handle);
14671 static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
14672 struct drm_file *file,
14673 unsigned flags, unsigned color,
14674 struct drm_clip_rect *clips,
14675 unsigned num_clips)
14677 struct drm_device *dev = fb->dev;
14678 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14679 struct drm_i915_gem_object *obj = intel_fb->obj;
14681 mutex_lock(&dev->struct_mutex);
14682 intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
14683 mutex_unlock(&dev->struct_mutex);
14688 static const struct drm_framebuffer_funcs intel_fb_funcs = {
14689 .destroy = intel_user_framebuffer_destroy,
14690 .create_handle = intel_user_framebuffer_create_handle,
14691 .dirty = intel_user_framebuffer_dirty,
14695 u32 intel_fb_pitch_limit(struct drm_device *dev, uint64_t fb_modifier,
14696 uint32_t pixel_format)
14698 u32 gen = INTEL_INFO(dev)->gen;
14701 int cpp = drm_format_plane_cpp(pixel_format, 0);
14703 /* "The stride in bytes must not exceed the of the size of 8K
14704 * pixels and 32K bytes."
14706 return min(8192 * cpp, 32768);
14707 } else if (gen >= 5 && !IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
14709 } else if (gen >= 4) {
14710 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14714 } else if (gen >= 3) {
14715 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14720 /* XXX DSPC is limited to 4k tiled */
14725 static int intel_framebuffer_init(struct drm_device *dev,
14726 struct intel_framebuffer *intel_fb,
14727 struct drm_mode_fb_cmd2 *mode_cmd,
14728 struct drm_i915_gem_object *obj)
14730 struct drm_i915_private *dev_priv = to_i915(dev);
14731 unsigned int aligned_height;
14733 u32 pitch_limit, stride_alignment;
14735 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
14737 if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
14738 /* Enforce that fb modifier and tiling mode match, but only for
14739 * X-tiled. This is needed for FBC. */
14740 if (!!(obj->tiling_mode == I915_TILING_X) !=
14741 !!(mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)) {
14742 DRM_DEBUG("tiling_mode doesn't match fb modifier\n");
14746 if (obj->tiling_mode == I915_TILING_X)
14747 mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
14748 else if (obj->tiling_mode == I915_TILING_Y) {
14749 DRM_DEBUG("No Y tiling for legacy addfb\n");
14754 /* Passed in modifier sanity checking. */
14755 switch (mode_cmd->modifier[0]) {
14756 case I915_FORMAT_MOD_Y_TILED:
14757 case I915_FORMAT_MOD_Yf_TILED:
14758 if (INTEL_INFO(dev)->gen < 9) {
14759 DRM_DEBUG("Unsupported tiling 0x%llx!\n",
14760 mode_cmd->modifier[0]);
14763 case DRM_FORMAT_MOD_NONE:
14764 case I915_FORMAT_MOD_X_TILED:
14767 DRM_DEBUG("Unsupported fb modifier 0x%llx!\n",
14768 mode_cmd->modifier[0]);
14772 stride_alignment = intel_fb_stride_alignment(dev_priv,
14773 mode_cmd->modifier[0],
14774 mode_cmd->pixel_format);
14775 if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
14776 DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
14777 mode_cmd->pitches[0], stride_alignment);
14781 pitch_limit = intel_fb_pitch_limit(dev, mode_cmd->modifier[0],
14782 mode_cmd->pixel_format);
14783 if (mode_cmd->pitches[0] > pitch_limit) {
14784 DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
14785 mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
14786 "tiled" : "linear",
14787 mode_cmd->pitches[0], pitch_limit);
14791 if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED &&
14792 mode_cmd->pitches[0] != obj->stride) {
14793 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
14794 mode_cmd->pitches[0], obj->stride);
14798 /* Reject formats not supported by any plane early. */
14799 switch (mode_cmd->pixel_format) {
14800 case DRM_FORMAT_C8:
14801 case DRM_FORMAT_RGB565:
14802 case DRM_FORMAT_XRGB8888:
14803 case DRM_FORMAT_ARGB8888:
14805 case DRM_FORMAT_XRGB1555:
14806 if (INTEL_INFO(dev)->gen > 3) {
14807 DRM_DEBUG("unsupported pixel format: %s\n",
14808 drm_get_format_name(mode_cmd->pixel_format));
14812 case DRM_FORMAT_ABGR8888:
14813 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
14814 INTEL_INFO(dev)->gen < 9) {
14815 DRM_DEBUG("unsupported pixel format: %s\n",
14816 drm_get_format_name(mode_cmd->pixel_format));
14820 case DRM_FORMAT_XBGR8888:
14821 case DRM_FORMAT_XRGB2101010:
14822 case DRM_FORMAT_XBGR2101010:
14823 if (INTEL_INFO(dev)->gen < 4) {
14824 DRM_DEBUG("unsupported pixel format: %s\n",
14825 drm_get_format_name(mode_cmd->pixel_format));
14829 case DRM_FORMAT_ABGR2101010:
14830 if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
14831 DRM_DEBUG("unsupported pixel format: %s\n",
14832 drm_get_format_name(mode_cmd->pixel_format));
14836 case DRM_FORMAT_YUYV:
14837 case DRM_FORMAT_UYVY:
14838 case DRM_FORMAT_YVYU:
14839 case DRM_FORMAT_VYUY:
14840 if (INTEL_INFO(dev)->gen < 5) {
14841 DRM_DEBUG("unsupported pixel format: %s\n",
14842 drm_get_format_name(mode_cmd->pixel_format));
14847 DRM_DEBUG("unsupported pixel format: %s\n",
14848 drm_get_format_name(mode_cmd->pixel_format));
14852 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
14853 if (mode_cmd->offsets[0] != 0)
14856 aligned_height = intel_fb_align_height(dev, mode_cmd->height,
14857 mode_cmd->pixel_format,
14858 mode_cmd->modifier[0]);
14859 /* FIXME drm helper for size checks (especially planar formats)? */
14860 if (obj->base.size < aligned_height * mode_cmd->pitches[0])
14863 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
14864 intel_fb->obj = obj;
14866 intel_fill_fb_info(dev_priv, &intel_fb->base);
14868 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
14870 DRM_ERROR("framebuffer init failed %d\n", ret);
14874 intel_fb->obj->framebuffer_references++;
14879 static struct drm_framebuffer *
14880 intel_user_framebuffer_create(struct drm_device *dev,
14881 struct drm_file *filp,
14882 const struct drm_mode_fb_cmd2 *user_mode_cmd)
14884 struct drm_framebuffer *fb;
14885 struct drm_i915_gem_object *obj;
14886 struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
14888 obj = to_intel_bo(drm_gem_object_lookup(filp, mode_cmd.handles[0]));
14889 if (&obj->base == NULL)
14890 return ERR_PTR(-ENOENT);
14892 fb = intel_framebuffer_create(dev, &mode_cmd, obj);
14894 drm_gem_object_unreference_unlocked(&obj->base);
14899 #ifndef CONFIG_DRM_FBDEV_EMULATION
14900 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
14905 static const struct drm_mode_config_funcs intel_mode_funcs = {
14906 .fb_create = intel_user_framebuffer_create,
14907 .output_poll_changed = intel_fbdev_output_poll_changed,
14908 .atomic_check = intel_atomic_check,
14909 .atomic_commit = intel_atomic_commit,
14910 .atomic_state_alloc = intel_atomic_state_alloc,
14911 .atomic_state_clear = intel_atomic_state_clear,
14915 * intel_init_display_hooks - initialize the display modesetting hooks
14916 * @dev_priv: device private
14918 void intel_init_display_hooks(struct drm_i915_private *dev_priv)
14920 if (INTEL_INFO(dev_priv)->gen >= 9) {
14921 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14922 dev_priv->display.get_initial_plane_config =
14923 skylake_get_initial_plane_config;
14924 dev_priv->display.crtc_compute_clock =
14925 haswell_crtc_compute_clock;
14926 dev_priv->display.crtc_enable = haswell_crtc_enable;
14927 dev_priv->display.crtc_disable = haswell_crtc_disable;
14928 } else if (HAS_DDI(dev_priv)) {
14929 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14930 dev_priv->display.get_initial_plane_config =
14931 ironlake_get_initial_plane_config;
14932 dev_priv->display.crtc_compute_clock =
14933 haswell_crtc_compute_clock;
14934 dev_priv->display.crtc_enable = haswell_crtc_enable;
14935 dev_priv->display.crtc_disable = haswell_crtc_disable;
14936 } else if (HAS_PCH_SPLIT(dev_priv)) {
14937 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
14938 dev_priv->display.get_initial_plane_config =
14939 ironlake_get_initial_plane_config;
14940 dev_priv->display.crtc_compute_clock =
14941 ironlake_crtc_compute_clock;
14942 dev_priv->display.crtc_enable = ironlake_crtc_enable;
14943 dev_priv->display.crtc_disable = ironlake_crtc_disable;
14944 } else if (IS_CHERRYVIEW(dev_priv)) {
14945 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14946 dev_priv->display.get_initial_plane_config =
14947 i9xx_get_initial_plane_config;
14948 dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
14949 dev_priv->display.crtc_enable = valleyview_crtc_enable;
14950 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14951 } else if (IS_VALLEYVIEW(dev_priv)) {
14952 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14953 dev_priv->display.get_initial_plane_config =
14954 i9xx_get_initial_plane_config;
14955 dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
14956 dev_priv->display.crtc_enable = valleyview_crtc_enable;
14957 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14958 } else if (IS_G4X(dev_priv)) {
14959 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14960 dev_priv->display.get_initial_plane_config =
14961 i9xx_get_initial_plane_config;
14962 dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
14963 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14964 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14965 } else if (IS_PINEVIEW(dev_priv)) {
14966 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14967 dev_priv->display.get_initial_plane_config =
14968 i9xx_get_initial_plane_config;
14969 dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
14970 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14971 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14972 } else if (!IS_GEN2(dev_priv)) {
14973 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14974 dev_priv->display.get_initial_plane_config =
14975 i9xx_get_initial_plane_config;
14976 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
14977 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14978 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14980 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14981 dev_priv->display.get_initial_plane_config =
14982 i9xx_get_initial_plane_config;
14983 dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
14984 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14985 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14988 /* Returns the core display clock speed */
14989 if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
14990 dev_priv->display.get_display_clock_speed =
14991 skylake_get_display_clock_speed;
14992 else if (IS_BROXTON(dev_priv))
14993 dev_priv->display.get_display_clock_speed =
14994 broxton_get_display_clock_speed;
14995 else if (IS_BROADWELL(dev_priv))
14996 dev_priv->display.get_display_clock_speed =
14997 broadwell_get_display_clock_speed;
14998 else if (IS_HASWELL(dev_priv))
14999 dev_priv->display.get_display_clock_speed =
15000 haswell_get_display_clock_speed;
15001 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
15002 dev_priv->display.get_display_clock_speed =
15003 valleyview_get_display_clock_speed;
15004 else if (IS_GEN5(dev_priv))
15005 dev_priv->display.get_display_clock_speed =
15006 ilk_get_display_clock_speed;
15007 else if (IS_I945G(dev_priv) || IS_BROADWATER(dev_priv) ||
15008 IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv))
15009 dev_priv->display.get_display_clock_speed =
15010 i945_get_display_clock_speed;
15011 else if (IS_GM45(dev_priv))
15012 dev_priv->display.get_display_clock_speed =
15013 gm45_get_display_clock_speed;
15014 else if (IS_CRESTLINE(dev_priv))
15015 dev_priv->display.get_display_clock_speed =
15016 i965gm_get_display_clock_speed;
15017 else if (IS_PINEVIEW(dev_priv))
15018 dev_priv->display.get_display_clock_speed =
15019 pnv_get_display_clock_speed;
15020 else if (IS_G33(dev_priv) || IS_G4X(dev_priv))
15021 dev_priv->display.get_display_clock_speed =
15022 g33_get_display_clock_speed;
15023 else if (IS_I915G(dev_priv))
15024 dev_priv->display.get_display_clock_speed =
15025 i915_get_display_clock_speed;
15026 else if (IS_I945GM(dev_priv) || IS_845G(dev_priv))
15027 dev_priv->display.get_display_clock_speed =
15028 i9xx_misc_get_display_clock_speed;
15029 else if (IS_I915GM(dev_priv))
15030 dev_priv->display.get_display_clock_speed =
15031 i915gm_get_display_clock_speed;
15032 else if (IS_I865G(dev_priv))
15033 dev_priv->display.get_display_clock_speed =
15034 i865_get_display_clock_speed;
15035 else if (IS_I85X(dev_priv))
15036 dev_priv->display.get_display_clock_speed =
15037 i85x_get_display_clock_speed;
15039 WARN(!IS_I830(dev_priv), "Unknown platform. Assuming 133 MHz CDCLK\n");
15040 dev_priv->display.get_display_clock_speed =
15041 i830_get_display_clock_speed;
15044 if (IS_GEN5(dev_priv)) {
15045 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
15046 } else if (IS_GEN6(dev_priv)) {
15047 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
15048 } else if (IS_IVYBRIDGE(dev_priv)) {
15049 /* FIXME: detect B0+ stepping and use auto training */
15050 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
15051 } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
15052 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
15053 if (IS_BROADWELL(dev_priv)) {
15054 dev_priv->display.modeset_commit_cdclk =
15055 broadwell_modeset_commit_cdclk;
15056 dev_priv->display.modeset_calc_cdclk =
15057 broadwell_modeset_calc_cdclk;
15059 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
15060 dev_priv->display.modeset_commit_cdclk =
15061 valleyview_modeset_commit_cdclk;
15062 dev_priv->display.modeset_calc_cdclk =
15063 valleyview_modeset_calc_cdclk;
15064 } else if (IS_BROXTON(dev_priv)) {
15065 dev_priv->display.modeset_commit_cdclk =
15066 broxton_modeset_commit_cdclk;
15067 dev_priv->display.modeset_calc_cdclk =
15068 broxton_modeset_calc_cdclk;
15071 switch (INTEL_INFO(dev_priv)->gen) {
15073 dev_priv->display.queue_flip = intel_gen2_queue_flip;
15077 dev_priv->display.queue_flip = intel_gen3_queue_flip;
15082 dev_priv->display.queue_flip = intel_gen4_queue_flip;
15086 dev_priv->display.queue_flip = intel_gen6_queue_flip;
15089 case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
15090 dev_priv->display.queue_flip = intel_gen7_queue_flip;
15093 /* Drop through - unsupported since execlist only. */
15095 /* Default just returns -ENODEV to indicate unsupported */
15096 dev_priv->display.queue_flip = intel_default_queue_flip;
15101 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
15102 * resume, or other times. This quirk makes sure that's the case for
15103 * affected systems.
15105 static void quirk_pipea_force(struct drm_device *dev)
15107 struct drm_i915_private *dev_priv = dev->dev_private;
15109 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
15110 DRM_INFO("applying pipe a force quirk\n");
15113 static void quirk_pipeb_force(struct drm_device *dev)
15115 struct drm_i915_private *dev_priv = dev->dev_private;
15117 dev_priv->quirks |= QUIRK_PIPEB_FORCE;
15118 DRM_INFO("applying pipe b force quirk\n");
15122 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
15124 static void quirk_ssc_force_disable(struct drm_device *dev)
15126 struct drm_i915_private *dev_priv = dev->dev_private;
15127 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
15128 DRM_INFO("applying lvds SSC disable quirk\n");
15132 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
15135 static void quirk_invert_brightness(struct drm_device *dev)
15137 struct drm_i915_private *dev_priv = dev->dev_private;
15138 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
15139 DRM_INFO("applying inverted panel brightness quirk\n");
15142 /* Some VBT's incorrectly indicate no backlight is present */
15143 static void quirk_backlight_present(struct drm_device *dev)
15145 struct drm_i915_private *dev_priv = dev->dev_private;
15146 dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
15147 DRM_INFO("applying backlight present quirk\n");
15150 struct intel_quirk {
15152 int subsystem_vendor;
15153 int subsystem_device;
15154 void (*hook)(struct drm_device *dev);
15157 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
15158 struct intel_dmi_quirk {
15159 void (*hook)(struct drm_device *dev);
15160 const struct dmi_system_id (*dmi_id_list)[];
15163 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
15165 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
15169 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
15171 .dmi_id_list = &(const struct dmi_system_id[]) {
15173 .callback = intel_dmi_reverse_brightness,
15174 .ident = "NCR Corporation",
15175 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
15176 DMI_MATCH(DMI_PRODUCT_NAME, ""),
15179 { } /* terminating entry */
15181 .hook = quirk_invert_brightness,
15185 static struct intel_quirk intel_quirks[] = {
15186 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
15187 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
15189 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
15190 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
15192 /* 830 needs to leave pipe A & dpll A up */
15193 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
15195 /* 830 needs to leave pipe B & dpll B up */
15196 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
15198 /* Lenovo U160 cannot use SSC on LVDS */
15199 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
15201 /* Sony Vaio Y cannot use SSC on LVDS */
15202 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
15204 /* Acer Aspire 5734Z must invert backlight brightness */
15205 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
15207 /* Acer/eMachines G725 */
15208 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
15210 /* Acer/eMachines e725 */
15211 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
15213 /* Acer/Packard Bell NCL20 */
15214 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
15216 /* Acer Aspire 4736Z */
15217 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
15219 /* Acer Aspire 5336 */
15220 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
15222 /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
15223 { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
15225 /* Acer C720 Chromebook (Core i3 4005U) */
15226 { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
15228 /* Apple Macbook 2,1 (Core 2 T7400) */
15229 { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
15231 /* Apple Macbook 4,1 */
15232 { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
15234 /* Toshiba CB35 Chromebook (Celeron 2955U) */
15235 { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
15237 /* HP Chromebook 14 (Celeron 2955U) */
15238 { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
15240 /* Dell Chromebook 11 */
15241 { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
15243 /* Dell Chromebook 11 (2015 version) */
15244 { 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
15247 static void intel_init_quirks(struct drm_device *dev)
15249 struct pci_dev *d = dev->pdev;
15252 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
15253 struct intel_quirk *q = &intel_quirks[i];
15255 if (d->device == q->device &&
15256 (d->subsystem_vendor == q->subsystem_vendor ||
15257 q->subsystem_vendor == PCI_ANY_ID) &&
15258 (d->subsystem_device == q->subsystem_device ||
15259 q->subsystem_device == PCI_ANY_ID))
15262 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
15263 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
15264 intel_dmi_quirks[i].hook(dev);
15268 /* Disable the VGA plane that we never use */
15269 static void i915_disable_vga(struct drm_device *dev)
15271 struct drm_i915_private *dev_priv = dev->dev_private;
15273 i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
15275 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
15276 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
15277 outb(SR01, VGA_SR_INDEX);
15278 sr1 = inb(VGA_SR_DATA);
15279 outb(sr1 | 1<<5, VGA_SR_DATA);
15280 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
15283 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
15284 POSTING_READ(vga_reg);
15287 void intel_modeset_init_hw(struct drm_device *dev)
15289 struct drm_i915_private *dev_priv = dev->dev_private;
15291 intel_update_cdclk(dev);
15293 dev_priv->atomic_cdclk_freq = dev_priv->cdclk_freq;
15295 intel_init_clock_gating(dev);
15296 intel_enable_gt_powersave(dev);
15300 * Calculate what we think the watermarks should be for the state we've read
15301 * out of the hardware and then immediately program those watermarks so that
15302 * we ensure the hardware settings match our internal state.
15304 * We can calculate what we think WM's should be by creating a duplicate of the
15305 * current state (which was constructed during hardware readout) and running it
15306 * through the atomic check code to calculate new watermark values in the
15309 static void sanitize_watermarks(struct drm_device *dev)
15311 struct drm_i915_private *dev_priv = to_i915(dev);
15312 struct drm_atomic_state *state;
15313 struct drm_crtc *crtc;
15314 struct drm_crtc_state *cstate;
15315 struct drm_modeset_acquire_ctx ctx;
15319 /* Only supported on platforms that use atomic watermark design */
15320 if (!dev_priv->display.optimize_watermarks)
15324 * We need to hold connection_mutex before calling duplicate_state so
15325 * that the connector loop is protected.
15327 drm_modeset_acquire_init(&ctx, 0);
15329 ret = drm_modeset_lock_all_ctx(dev, &ctx);
15330 if (ret == -EDEADLK) {
15331 drm_modeset_backoff(&ctx);
15333 } else if (WARN_ON(ret)) {
15337 state = drm_atomic_helper_duplicate_state(dev, &ctx);
15338 if (WARN_ON(IS_ERR(state)))
15342 * Hardware readout is the only time we don't want to calculate
15343 * intermediate watermarks (since we don't trust the current
15346 to_intel_atomic_state(state)->skip_intermediate_wm = true;
15348 ret = intel_atomic_check(dev, state);
15351 * If we fail here, it means that the hardware appears to be
15352 * programmed in a way that shouldn't be possible, given our
15353 * understanding of watermark requirements. This might mean a
15354 * mistake in the hardware readout code or a mistake in the
15355 * watermark calculations for a given platform. Raise a WARN
15356 * so that this is noticeable.
15358 * If this actually happens, we'll have to just leave the
15359 * BIOS-programmed watermarks untouched and hope for the best.
15361 WARN(true, "Could not determine valid watermarks for inherited state\n");
15365 /* Write calculated watermark values back */
15366 to_i915(dev)->wm.config = to_intel_atomic_state(state)->wm_config;
15367 for_each_crtc_in_state(state, crtc, cstate, i) {
15368 struct intel_crtc_state *cs = to_intel_crtc_state(cstate);
15370 cs->wm.need_postvbl_update = true;
15371 dev_priv->display.optimize_watermarks(cs);
15374 drm_atomic_state_free(state);
15376 drm_modeset_drop_locks(&ctx);
15377 drm_modeset_acquire_fini(&ctx);
15380 void intel_modeset_init(struct drm_device *dev)
15382 struct drm_i915_private *dev_priv = to_i915(dev);
15383 struct i915_ggtt *ggtt = &dev_priv->ggtt;
15386 struct intel_crtc *crtc;
15388 drm_mode_config_init(dev);
15390 dev->mode_config.min_width = 0;
15391 dev->mode_config.min_height = 0;
15393 dev->mode_config.preferred_depth = 24;
15394 dev->mode_config.prefer_shadow = 1;
15396 dev->mode_config.allow_fb_modifiers = true;
15398 dev->mode_config.funcs = &intel_mode_funcs;
15400 intel_init_quirks(dev);
15402 intel_init_pm(dev);
15404 if (INTEL_INFO(dev)->num_pipes == 0)
15408 * There may be no VBT; and if the BIOS enabled SSC we can
15409 * just keep using it to avoid unnecessary flicker. Whereas if the
15410 * BIOS isn't using it, don't assume it will work even if the VBT
15411 * indicates as much.
15413 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
15414 bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
15417 if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
15418 DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
15419 bios_lvds_use_ssc ? "en" : "dis",
15420 dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
15421 dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
15425 if (IS_GEN2(dev)) {
15426 dev->mode_config.max_width = 2048;
15427 dev->mode_config.max_height = 2048;
15428 } else if (IS_GEN3(dev)) {
15429 dev->mode_config.max_width = 4096;
15430 dev->mode_config.max_height = 4096;
15432 dev->mode_config.max_width = 8192;
15433 dev->mode_config.max_height = 8192;
15436 if (IS_845G(dev) || IS_I865G(dev)) {
15437 dev->mode_config.cursor_width = IS_845G(dev) ? 64 : 512;
15438 dev->mode_config.cursor_height = 1023;
15439 } else if (IS_GEN2(dev)) {
15440 dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
15441 dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
15443 dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
15444 dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
15447 dev->mode_config.fb_base = ggtt->mappable_base;
15449 DRM_DEBUG_KMS("%d display pipe%s available.\n",
15450 INTEL_INFO(dev)->num_pipes,
15451 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
15453 for_each_pipe(dev_priv, pipe) {
15454 intel_crtc_init(dev, pipe);
15455 for_each_sprite(dev_priv, pipe, sprite) {
15456 ret = intel_plane_init(dev, pipe, sprite);
15458 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
15459 pipe_name(pipe), sprite_name(pipe, sprite), ret);
15463 intel_update_czclk(dev_priv);
15464 intel_update_rawclk(dev_priv);
15465 intel_update_cdclk(dev);
15467 intel_shared_dpll_init(dev);
15469 /* Just disable it once at startup */
15470 i915_disable_vga(dev);
15471 intel_setup_outputs(dev);
15473 drm_modeset_lock_all(dev);
15474 intel_modeset_setup_hw_state(dev);
15475 drm_modeset_unlock_all(dev);
15477 for_each_intel_crtc(dev, crtc) {
15478 struct intel_initial_plane_config plane_config = {};
15484 * Note that reserving the BIOS fb up front prevents us
15485 * from stuffing other stolen allocations like the ring
15486 * on top. This prevents some ugliness at boot time, and
15487 * can even allow for smooth boot transitions if the BIOS
15488 * fb is large enough for the active pipe configuration.
15490 dev_priv->display.get_initial_plane_config(crtc,
15494 * If the fb is shared between multiple heads, we'll
15495 * just get the first one.
15497 intel_find_initial_plane_obj(crtc, &plane_config);
15501 * Make sure hardware watermarks really match the state we read out.
15502 * Note that we need to do this after reconstructing the BIOS fb's
15503 * since the watermark calculation done here will use pstate->fb.
15505 sanitize_watermarks(dev);
15508 static void intel_enable_pipe_a(struct drm_device *dev)
15510 struct intel_connector *connector;
15511 struct drm_connector *crt = NULL;
15512 struct intel_load_detect_pipe load_detect_temp;
15513 struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
15515 /* We can't just switch on the pipe A, we need to set things up with a
15516 * proper mode and output configuration. As a gross hack, enable pipe A
15517 * by enabling the load detect pipe once. */
15518 for_each_intel_connector(dev, connector) {
15519 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
15520 crt = &connector->base;
15528 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
15529 intel_release_load_detect_pipe(crt, &load_detect_temp, ctx);
15533 intel_check_plane_mapping(struct intel_crtc *crtc)
15535 struct drm_device *dev = crtc->base.dev;
15536 struct drm_i915_private *dev_priv = dev->dev_private;
15539 if (INTEL_INFO(dev)->num_pipes == 1)
15542 val = I915_READ(DSPCNTR(!crtc->plane));
15544 if ((val & DISPLAY_PLANE_ENABLE) &&
15545 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
15551 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
15553 struct drm_device *dev = crtc->base.dev;
15554 struct intel_encoder *encoder;
15556 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
15562 static bool intel_encoder_has_connectors(struct intel_encoder *encoder)
15564 struct drm_device *dev = encoder->base.dev;
15565 struct intel_connector *connector;
15567 for_each_connector_on_encoder(dev, &encoder->base, connector)
15573 static void intel_sanitize_crtc(struct intel_crtc *crtc)
15575 struct drm_device *dev = crtc->base.dev;
15576 struct drm_i915_private *dev_priv = dev->dev_private;
15577 enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
15579 /* Clear any frame start delays used for debugging left by the BIOS */
15580 if (!transcoder_is_dsi(cpu_transcoder)) {
15581 i915_reg_t reg = PIPECONF(cpu_transcoder);
15584 I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
15587 /* restore vblank interrupts to correct state */
15588 drm_crtc_vblank_reset(&crtc->base);
15589 if (crtc->active) {
15590 struct intel_plane *plane;
15592 drm_crtc_vblank_on(&crtc->base);
15594 /* Disable everything but the primary plane */
15595 for_each_intel_plane_on_crtc(dev, crtc, plane) {
15596 if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
15599 plane->disable_plane(&plane->base, &crtc->base);
15603 /* We need to sanitize the plane -> pipe mapping first because this will
15604 * disable the crtc (and hence change the state) if it is wrong. Note
15605 * that gen4+ has a fixed plane -> pipe mapping. */
15606 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
15609 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
15610 crtc->base.base.id);
15612 /* Pipe has the wrong plane attached and the plane is active.
15613 * Temporarily change the plane mapping and disable everything
15615 plane = crtc->plane;
15616 to_intel_plane_state(crtc->base.primary->state)->visible = true;
15617 crtc->plane = !plane;
15618 intel_crtc_disable_noatomic(&crtc->base);
15619 crtc->plane = plane;
15622 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
15623 crtc->pipe == PIPE_A && !crtc->active) {
15624 /* BIOS forgot to enable pipe A, this mostly happens after
15625 * resume. Force-enable the pipe to fix this, the update_dpms
15626 * call below we restore the pipe to the right state, but leave
15627 * the required bits on. */
15628 intel_enable_pipe_a(dev);
15631 /* Adjust the state of the output pipe according to whether we
15632 * have active connectors/encoders. */
15633 if (crtc->active && !intel_crtc_has_encoders(crtc))
15634 intel_crtc_disable_noatomic(&crtc->base);
15636 if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
15638 * We start out with underrun reporting disabled to avoid races.
15639 * For correct bookkeeping mark this on active crtcs.
15641 * Also on gmch platforms we dont have any hardware bits to
15642 * disable the underrun reporting. Which means we need to start
15643 * out with underrun reporting disabled also on inactive pipes,
15644 * since otherwise we'll complain about the garbage we read when
15645 * e.g. coming up after runtime pm.
15647 * No protection against concurrent access is required - at
15648 * worst a fifo underrun happens which also sets this to false.
15650 crtc->cpu_fifo_underrun_disabled = true;
15651 crtc->pch_fifo_underrun_disabled = true;
15655 static void intel_sanitize_encoder(struct intel_encoder *encoder)
15657 struct intel_connector *connector;
15658 struct drm_device *dev = encoder->base.dev;
15660 /* We need to check both for a crtc link (meaning that the
15661 * encoder is active and trying to read from a pipe) and the
15662 * pipe itself being active. */
15663 bool has_active_crtc = encoder->base.crtc &&
15664 to_intel_crtc(encoder->base.crtc)->active;
15666 if (intel_encoder_has_connectors(encoder) && !has_active_crtc) {
15667 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
15668 encoder->base.base.id,
15669 encoder->base.name);
15671 /* Connector is active, but has no active pipe. This is
15672 * fallout from our resume register restoring. Disable
15673 * the encoder manually again. */
15674 if (encoder->base.crtc) {
15675 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
15676 encoder->base.base.id,
15677 encoder->base.name);
15678 encoder->disable(encoder);
15679 if (encoder->post_disable)
15680 encoder->post_disable(encoder);
15682 encoder->base.crtc = NULL;
15684 /* Inconsistent output/port/pipe state happens presumably due to
15685 * a bug in one of the get_hw_state functions. Or someplace else
15686 * in our code, like the register restore mess on resume. Clamp
15687 * things to off as a safer default. */
15688 for_each_intel_connector(dev, connector) {
15689 if (connector->encoder != encoder)
15691 connector->base.dpms = DRM_MODE_DPMS_OFF;
15692 connector->base.encoder = NULL;
15695 /* Enabled encoders without active connectors will be fixed in
15696 * the crtc fixup. */
15699 void i915_redisable_vga_power_on(struct drm_device *dev)
15701 struct drm_i915_private *dev_priv = dev->dev_private;
15702 i915_reg_t vga_reg = i915_vgacntrl_reg(dev);
15704 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
15705 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
15706 i915_disable_vga(dev);
15710 void i915_redisable_vga(struct drm_device *dev)
15712 struct drm_i915_private *dev_priv = dev->dev_private;
15714 /* This function can be called both from intel_modeset_setup_hw_state or
15715 * at a very early point in our resume sequence, where the power well
15716 * structures are not yet restored. Since this function is at a very
15717 * paranoid "someone might have enabled VGA while we were not looking"
15718 * level, just check if the power well is enabled instead of trying to
15719 * follow the "don't touch the power well if we don't need it" policy
15720 * the rest of the driver uses. */
15721 if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_VGA))
15724 i915_redisable_vga_power_on(dev);
15726 intel_display_power_put(dev_priv, POWER_DOMAIN_VGA);
15729 static bool primary_get_hw_state(struct intel_plane *plane)
15731 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
15733 return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
15736 /* FIXME read out full plane state for all planes */
15737 static void readout_plane_state(struct intel_crtc *crtc)
15739 struct drm_plane *primary = crtc->base.primary;
15740 struct intel_plane_state *plane_state =
15741 to_intel_plane_state(primary->state);
15743 plane_state->visible = crtc->active &&
15744 primary_get_hw_state(to_intel_plane(primary));
15746 if (plane_state->visible)
15747 crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
15750 static void intel_modeset_readout_hw_state(struct drm_device *dev)
15752 struct drm_i915_private *dev_priv = dev->dev_private;
15754 struct intel_crtc *crtc;
15755 struct intel_encoder *encoder;
15756 struct intel_connector *connector;
15759 dev_priv->active_crtcs = 0;
15761 for_each_intel_crtc(dev, crtc) {
15762 struct intel_crtc_state *crtc_state = crtc->config;
15765 __drm_atomic_helper_crtc_destroy_state(&crtc_state->base);
15766 memset(crtc_state, 0, sizeof(*crtc_state));
15767 crtc_state->base.crtc = &crtc->base;
15769 crtc_state->base.active = crtc_state->base.enable =
15770 dev_priv->display.get_pipe_config(crtc, crtc_state);
15772 crtc->base.enabled = crtc_state->base.enable;
15773 crtc->active = crtc_state->base.active;
15775 if (crtc_state->base.active) {
15776 dev_priv->active_crtcs |= 1 << crtc->pipe;
15778 if (IS_BROADWELL(dev_priv)) {
15779 pixclk = ilk_pipe_pixel_rate(crtc_state);
15781 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
15782 if (crtc_state->ips_enabled)
15783 pixclk = DIV_ROUND_UP(pixclk * 100, 95);
15784 } else if (IS_VALLEYVIEW(dev_priv) ||
15785 IS_CHERRYVIEW(dev_priv) ||
15786 IS_BROXTON(dev_priv))
15787 pixclk = crtc_state->base.adjusted_mode.crtc_clock;
15789 WARN_ON(dev_priv->display.modeset_calc_cdclk);
15792 dev_priv->min_pixclk[crtc->pipe] = pixclk;
15794 readout_plane_state(crtc);
15796 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
15797 crtc->base.base.id,
15798 crtc->active ? "enabled" : "disabled");
15801 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15802 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15804 pll->on = pll->funcs.get_hw_state(dev_priv, pll,
15805 &pll->config.hw_state);
15806 pll->config.crtc_mask = 0;
15807 for_each_intel_crtc(dev, crtc) {
15808 if (crtc->active && crtc->config->shared_dpll == pll)
15809 pll->config.crtc_mask |= 1 << crtc->pipe;
15811 pll->active_mask = pll->config.crtc_mask;
15813 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
15814 pll->name, pll->config.crtc_mask, pll->on);
15817 for_each_intel_encoder(dev, encoder) {
15820 if (encoder->get_hw_state(encoder, &pipe)) {
15821 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
15822 encoder->base.crtc = &crtc->base;
15823 encoder->get_config(encoder, crtc->config);
15825 encoder->base.crtc = NULL;
15828 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
15829 encoder->base.base.id,
15830 encoder->base.name,
15831 encoder->base.crtc ? "enabled" : "disabled",
15835 for_each_intel_connector(dev, connector) {
15836 if (connector->get_hw_state(connector)) {
15837 connector->base.dpms = DRM_MODE_DPMS_ON;
15839 encoder = connector->encoder;
15840 connector->base.encoder = &encoder->base;
15842 if (encoder->base.crtc &&
15843 encoder->base.crtc->state->active) {
15845 * This has to be done during hardware readout
15846 * because anything calling .crtc_disable may
15847 * rely on the connector_mask being accurate.
15849 encoder->base.crtc->state->connector_mask |=
15850 1 << drm_connector_index(&connector->base);
15851 encoder->base.crtc->state->encoder_mask |=
15852 1 << drm_encoder_index(&encoder->base);
15856 connector->base.dpms = DRM_MODE_DPMS_OFF;
15857 connector->base.encoder = NULL;
15859 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
15860 connector->base.base.id,
15861 connector->base.name,
15862 connector->base.encoder ? "enabled" : "disabled");
15865 for_each_intel_crtc(dev, crtc) {
15866 crtc->base.hwmode = crtc->config->base.adjusted_mode;
15868 memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
15869 if (crtc->base.state->active) {
15870 intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
15871 intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
15872 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
15875 * The initial mode needs to be set in order to keep
15876 * the atomic core happy. It wants a valid mode if the
15877 * crtc's enabled, so we do the above call.
15879 * At this point some state updated by the connectors
15880 * in their ->detect() callback has not run yet, so
15881 * no recalculation can be done yet.
15883 * Even if we could do a recalculation and modeset
15884 * right now it would cause a double modeset if
15885 * fbdev or userspace chooses a different initial mode.
15887 * If that happens, someone indicated they wanted a
15888 * mode change, which means it's safe to do a full
15891 crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
15893 drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
15894 update_scanline_offset(crtc);
15897 intel_pipe_config_sanity_check(dev_priv, crtc->config);
15901 /* Scan out the current hw modeset state,
15902 * and sanitizes it to the current state
15905 intel_modeset_setup_hw_state(struct drm_device *dev)
15907 struct drm_i915_private *dev_priv = dev->dev_private;
15909 struct intel_crtc *crtc;
15910 struct intel_encoder *encoder;
15913 intel_modeset_readout_hw_state(dev);
15915 /* HW state is read out, now we need to sanitize this mess. */
15916 for_each_intel_encoder(dev, encoder) {
15917 intel_sanitize_encoder(encoder);
15920 for_each_pipe(dev_priv, pipe) {
15921 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
15922 intel_sanitize_crtc(crtc);
15923 intel_dump_pipe_config(crtc, crtc->config,
15924 "[setup_hw_state]");
15927 intel_modeset_update_connector_atomic_state(dev);
15929 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15930 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15932 if (!pll->on || pll->active_mask)
15935 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
15937 pll->funcs.disable(dev_priv, pll);
15941 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
15942 vlv_wm_get_hw_state(dev);
15943 else if (IS_GEN9(dev))
15944 skl_wm_get_hw_state(dev);
15945 else if (HAS_PCH_SPLIT(dev))
15946 ilk_wm_get_hw_state(dev);
15948 for_each_intel_crtc(dev, crtc) {
15949 unsigned long put_domains;
15951 put_domains = modeset_get_crtc_power_domains(&crtc->base, crtc->config);
15952 if (WARN_ON(put_domains))
15953 modeset_put_power_domains(dev_priv, put_domains);
15955 intel_display_set_init_power(dev_priv, false);
15957 intel_fbc_init_pipe_state(dev_priv);
15960 void intel_display_resume(struct drm_device *dev)
15962 struct drm_i915_private *dev_priv = to_i915(dev);
15963 struct drm_atomic_state *state = dev_priv->modeset_restore_state;
15964 struct drm_modeset_acquire_ctx ctx;
15966 bool setup = false;
15968 dev_priv->modeset_restore_state = NULL;
15971 * This is a cludge because with real atomic modeset mode_config.mutex
15972 * won't be taken. Unfortunately some probed state like
15973 * audio_codec_enable is still protected by mode_config.mutex, so lock
15976 mutex_lock(&dev->mode_config.mutex);
15977 drm_modeset_acquire_init(&ctx, 0);
15980 ret = drm_modeset_lock_all_ctx(dev, &ctx);
15982 if (ret == 0 && !setup) {
15985 intel_modeset_setup_hw_state(dev);
15986 i915_redisable_vga(dev);
15989 if (ret == 0 && state) {
15990 struct drm_crtc_state *crtc_state;
15991 struct drm_crtc *crtc;
15994 state->acquire_ctx = &ctx;
15996 /* ignore any reset values/BIOS leftovers in the WM registers */
15997 to_intel_atomic_state(state)->skip_intermediate_wm = true;
15999 for_each_crtc_in_state(state, crtc, crtc_state, i) {
16001 * Force recalculation even if we restore
16002 * current state. With fast modeset this may not result
16003 * in a modeset when the state is compatible.
16005 crtc_state->mode_changed = true;
16008 ret = drm_atomic_commit(state);
16011 if (ret == -EDEADLK) {
16012 drm_modeset_backoff(&ctx);
16016 drm_modeset_drop_locks(&ctx);
16017 drm_modeset_acquire_fini(&ctx);
16018 mutex_unlock(&dev->mode_config.mutex);
16021 DRM_ERROR("Restoring old state failed with %i\n", ret);
16022 drm_atomic_state_free(state);
16026 void intel_modeset_gem_init(struct drm_device *dev)
16028 struct drm_crtc *c;
16029 struct drm_i915_gem_object *obj;
16032 intel_init_gt_powersave(dev);
16034 intel_modeset_init_hw(dev);
16036 intel_setup_overlay(dev);
16039 * Make sure any fbs we allocated at startup are properly
16040 * pinned & fenced. When we do the allocation it's too early
16043 for_each_crtc(dev, c) {
16044 obj = intel_fb_obj(c->primary->fb);
16048 mutex_lock(&dev->struct_mutex);
16049 ret = intel_pin_and_fence_fb_obj(c->primary->fb,
16050 c->primary->state->rotation);
16051 mutex_unlock(&dev->struct_mutex);
16053 DRM_ERROR("failed to pin boot fb on pipe %d\n",
16054 to_intel_crtc(c)->pipe);
16055 drm_framebuffer_unreference(c->primary->fb);
16056 c->primary->fb = NULL;
16057 c->primary->crtc = c->primary->state->crtc = NULL;
16058 update_state_fb(c->primary);
16059 c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
16063 intel_backlight_register(dev);
16066 void intel_connector_unregister(struct intel_connector *intel_connector)
16068 struct drm_connector *connector = &intel_connector->base;
16070 intel_panel_destroy_backlight(connector);
16071 drm_connector_unregister(connector);
16074 void intel_modeset_cleanup(struct drm_device *dev)
16076 struct drm_i915_private *dev_priv = dev->dev_private;
16077 struct intel_connector *connector;
16079 intel_disable_gt_powersave(dev);
16081 intel_backlight_unregister(dev);
16084 * Interrupts and polling as the first thing to avoid creating havoc.
16085 * Too much stuff here (turning of connectors, ...) would
16086 * experience fancy races otherwise.
16088 intel_irq_uninstall(dev_priv);
16091 * Due to the hpd irq storm handling the hotplug work can re-arm the
16092 * poll handlers. Hence disable polling after hpd handling is shut down.
16094 drm_kms_helper_poll_fini(dev);
16096 intel_unregister_dsm_handler();
16098 intel_fbc_global_disable(dev_priv);
16100 /* flush any delayed tasks or pending work */
16101 flush_scheduled_work();
16103 /* destroy the backlight and sysfs files before encoders/connectors */
16104 for_each_intel_connector(dev, connector)
16105 connector->unregister(connector);
16107 drm_mode_config_cleanup(dev);
16109 intel_cleanup_overlay(dev);
16111 intel_cleanup_gt_powersave(dev);
16113 intel_teardown_gmbus(dev);
16117 * Return which encoder is currently attached for connector.
16119 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
16121 return &intel_attached_encoder(connector)->base;
16124 void intel_connector_attach_encoder(struct intel_connector *connector,
16125 struct intel_encoder *encoder)
16127 connector->encoder = encoder;
16128 drm_mode_connector_attach_encoder(&connector->base,
16133 * set vga decode state - true == enable VGA decode
16135 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
16137 struct drm_i915_private *dev_priv = dev->dev_private;
16138 unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
16141 if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
16142 DRM_ERROR("failed to read control word\n");
16146 if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
16150 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
16152 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
16154 if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
16155 DRM_ERROR("failed to write control word\n");
16162 struct intel_display_error_state {
16164 u32 power_well_driver;
16166 int num_transcoders;
16168 struct intel_cursor_error_state {
16173 } cursor[I915_MAX_PIPES];
16175 struct intel_pipe_error_state {
16176 bool power_domain_on;
16179 } pipe[I915_MAX_PIPES];
16181 struct intel_plane_error_state {
16189 } plane[I915_MAX_PIPES];
16191 struct intel_transcoder_error_state {
16192 bool power_domain_on;
16193 enum transcoder cpu_transcoder;
16206 struct intel_display_error_state *
16207 intel_display_capture_error_state(struct drm_device *dev)
16209 struct drm_i915_private *dev_priv = dev->dev_private;
16210 struct intel_display_error_state *error;
16211 int transcoders[] = {
16219 if (INTEL_INFO(dev)->num_pipes == 0)
16222 error = kzalloc(sizeof(*error), GFP_ATOMIC);
16226 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
16227 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
16229 for_each_pipe(dev_priv, i) {
16230 error->pipe[i].power_domain_on =
16231 __intel_display_power_is_enabled(dev_priv,
16232 POWER_DOMAIN_PIPE(i));
16233 if (!error->pipe[i].power_domain_on)
16236 error->cursor[i].control = I915_READ(CURCNTR(i));
16237 error->cursor[i].position = I915_READ(CURPOS(i));
16238 error->cursor[i].base = I915_READ(CURBASE(i));
16240 error->plane[i].control = I915_READ(DSPCNTR(i));
16241 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
16242 if (INTEL_INFO(dev)->gen <= 3) {
16243 error->plane[i].size = I915_READ(DSPSIZE(i));
16244 error->plane[i].pos = I915_READ(DSPPOS(i));
16246 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
16247 error->plane[i].addr = I915_READ(DSPADDR(i));
16248 if (INTEL_INFO(dev)->gen >= 4) {
16249 error->plane[i].surface = I915_READ(DSPSURF(i));
16250 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
16253 error->pipe[i].source = I915_READ(PIPESRC(i));
16255 if (HAS_GMCH_DISPLAY(dev))
16256 error->pipe[i].stat = I915_READ(PIPESTAT(i));
16259 /* Note: this does not include DSI transcoders. */
16260 error->num_transcoders = INTEL_INFO(dev)->num_pipes;
16261 if (HAS_DDI(dev_priv))
16262 error->num_transcoders++; /* Account for eDP. */
16264 for (i = 0; i < error->num_transcoders; i++) {
16265 enum transcoder cpu_transcoder = transcoders[i];
16267 error->transcoder[i].power_domain_on =
16268 __intel_display_power_is_enabled(dev_priv,
16269 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
16270 if (!error->transcoder[i].power_domain_on)
16273 error->transcoder[i].cpu_transcoder = cpu_transcoder;
16275 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
16276 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
16277 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
16278 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
16279 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
16280 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
16281 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
16287 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
16290 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
16291 struct drm_device *dev,
16292 struct intel_display_error_state *error)
16294 struct drm_i915_private *dev_priv = dev->dev_private;
16300 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
16301 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
16302 err_printf(m, "PWR_WELL_CTL2: %08x\n",
16303 error->power_well_driver);
16304 for_each_pipe(dev_priv, i) {
16305 err_printf(m, "Pipe [%d]:\n", i);
16306 err_printf(m, " Power: %s\n",
16307 onoff(error->pipe[i].power_domain_on));
16308 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
16309 err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
16311 err_printf(m, "Plane [%d]:\n", i);
16312 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
16313 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
16314 if (INTEL_INFO(dev)->gen <= 3) {
16315 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
16316 err_printf(m, " POS: %08x\n", error->plane[i].pos);
16318 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
16319 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
16320 if (INTEL_INFO(dev)->gen >= 4) {
16321 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
16322 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
16325 err_printf(m, "Cursor [%d]:\n", i);
16326 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
16327 err_printf(m, " POS: %08x\n", error->cursor[i].position);
16328 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
16331 for (i = 0; i < error->num_transcoders; i++) {
16332 err_printf(m, "CPU transcoder: %s\n",
16333 transcoder_name(error->transcoder[i].cpu_transcoder));
16334 err_printf(m, " Power: %s\n",
16335 onoff(error->transcoder[i].power_domain_on));
16336 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
16337 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
16338 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
16339 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
16340 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
16341 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
16342 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);