2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
39 #include "i915_trace.h"
40 #include "drm_dp_helper.h"
41 #include "drm_crtc_helper.h"
42 #include <linux/dma_remapping.h>
44 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
46 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
47 static void intel_increase_pllclock(struct drm_crtc *crtc);
48 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
71 #define INTEL_P2_NUM 2
72 typedef struct intel_limit intel_limit_t;
74 intel_range_t dot, vco, n, m, m1, m2, p, p1;
76 bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
77 int, int, intel_clock_t *, intel_clock_t *);
81 #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */
84 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
85 int target, int refclk, intel_clock_t *match_clock,
86 intel_clock_t *best_clock);
88 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
89 int target, int refclk, intel_clock_t *match_clock,
90 intel_clock_t *best_clock);
93 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
94 int target, int refclk, intel_clock_t *match_clock,
95 intel_clock_t *best_clock);
97 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
98 int target, int refclk, intel_clock_t *match_clock,
99 intel_clock_t *best_clock);
102 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
103 int target, int refclk, intel_clock_t *match_clock,
104 intel_clock_t *best_clock);
106 static inline u32 /* units of 100MHz */
107 intel_fdi_link_freq(struct drm_device *dev)
110 struct drm_i915_private *dev_priv = dev->dev_private;
111 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
116 static const intel_limit_t intel_limits_i8xx_dvo = {
117 .dot = { .min = 25000, .max = 350000 },
118 .vco = { .min = 930000, .max = 1400000 },
119 .n = { .min = 3, .max = 16 },
120 .m = { .min = 96, .max = 140 },
121 .m1 = { .min = 18, .max = 26 },
122 .m2 = { .min = 6, .max = 16 },
123 .p = { .min = 4, .max = 128 },
124 .p1 = { .min = 2, .max = 33 },
125 .p2 = { .dot_limit = 165000,
126 .p2_slow = 4, .p2_fast = 2 },
127 .find_pll = intel_find_best_PLL,
130 static const intel_limit_t intel_limits_i8xx_lvds = {
131 .dot = { .min = 25000, .max = 350000 },
132 .vco = { .min = 930000, .max = 1400000 },
133 .n = { .min = 3, .max = 16 },
134 .m = { .min = 96, .max = 140 },
135 .m1 = { .min = 18, .max = 26 },
136 .m2 = { .min = 6, .max = 16 },
137 .p = { .min = 4, .max = 128 },
138 .p1 = { .min = 1, .max = 6 },
139 .p2 = { .dot_limit = 165000,
140 .p2_slow = 14, .p2_fast = 7 },
141 .find_pll = intel_find_best_PLL,
144 static const intel_limit_t intel_limits_i9xx_sdvo = {
145 .dot = { .min = 20000, .max = 400000 },
146 .vco = { .min = 1400000, .max = 2800000 },
147 .n = { .min = 1, .max = 6 },
148 .m = { .min = 70, .max = 120 },
149 .m1 = { .min = 10, .max = 22 },
150 .m2 = { .min = 5, .max = 9 },
151 .p = { .min = 5, .max = 80 },
152 .p1 = { .min = 1, .max = 8 },
153 .p2 = { .dot_limit = 200000,
154 .p2_slow = 10, .p2_fast = 5 },
155 .find_pll = intel_find_best_PLL,
158 static const intel_limit_t intel_limits_i9xx_lvds = {
159 .dot = { .min = 20000, .max = 400000 },
160 .vco = { .min = 1400000, .max = 2800000 },
161 .n = { .min = 1, .max = 6 },
162 .m = { .min = 70, .max = 120 },
163 .m1 = { .min = 10, .max = 22 },
164 .m2 = { .min = 5, .max = 9 },
165 .p = { .min = 7, .max = 98 },
166 .p1 = { .min = 1, .max = 8 },
167 .p2 = { .dot_limit = 112000,
168 .p2_slow = 14, .p2_fast = 7 },
169 .find_pll = intel_find_best_PLL,
173 static const intel_limit_t intel_limits_g4x_sdvo = {
174 .dot = { .min = 25000, .max = 270000 },
175 .vco = { .min = 1750000, .max = 3500000},
176 .n = { .min = 1, .max = 4 },
177 .m = { .min = 104, .max = 138 },
178 .m1 = { .min = 17, .max = 23 },
179 .m2 = { .min = 5, .max = 11 },
180 .p = { .min = 10, .max = 30 },
181 .p1 = { .min = 1, .max = 3},
182 .p2 = { .dot_limit = 270000,
186 .find_pll = intel_g4x_find_best_PLL,
189 static const intel_limit_t intel_limits_g4x_hdmi = {
190 .dot = { .min = 22000, .max = 400000 },
191 .vco = { .min = 1750000, .max = 3500000},
192 .n = { .min = 1, .max = 4 },
193 .m = { .min = 104, .max = 138 },
194 .m1 = { .min = 16, .max = 23 },
195 .m2 = { .min = 5, .max = 11 },
196 .p = { .min = 5, .max = 80 },
197 .p1 = { .min = 1, .max = 8},
198 .p2 = { .dot_limit = 165000,
199 .p2_slow = 10, .p2_fast = 5 },
200 .find_pll = intel_g4x_find_best_PLL,
203 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
204 .dot = { .min = 20000, .max = 115000 },
205 .vco = { .min = 1750000, .max = 3500000 },
206 .n = { .min = 1, .max = 3 },
207 .m = { .min = 104, .max = 138 },
208 .m1 = { .min = 17, .max = 23 },
209 .m2 = { .min = 5, .max = 11 },
210 .p = { .min = 28, .max = 112 },
211 .p1 = { .min = 2, .max = 8 },
212 .p2 = { .dot_limit = 0,
213 .p2_slow = 14, .p2_fast = 14
215 .find_pll = intel_g4x_find_best_PLL,
218 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
219 .dot = { .min = 80000, .max = 224000 },
220 .vco = { .min = 1750000, .max = 3500000 },
221 .n = { .min = 1, .max = 3 },
222 .m = { .min = 104, .max = 138 },
223 .m1 = { .min = 17, .max = 23 },
224 .m2 = { .min = 5, .max = 11 },
225 .p = { .min = 14, .max = 42 },
226 .p1 = { .min = 2, .max = 6 },
227 .p2 = { .dot_limit = 0,
228 .p2_slow = 7, .p2_fast = 7
230 .find_pll = intel_g4x_find_best_PLL,
233 static const intel_limit_t intel_limits_g4x_display_port = {
234 .dot = { .min = 161670, .max = 227000 },
235 .vco = { .min = 1750000, .max = 3500000},
236 .n = { .min = 1, .max = 2 },
237 .m = { .min = 97, .max = 108 },
238 .m1 = { .min = 0x10, .max = 0x12 },
239 .m2 = { .min = 0x05, .max = 0x06 },
240 .p = { .min = 10, .max = 20 },
241 .p1 = { .min = 1, .max = 2},
242 .p2 = { .dot_limit = 0,
243 .p2_slow = 10, .p2_fast = 10 },
244 .find_pll = intel_find_pll_g4x_dp,
247 static const intel_limit_t intel_limits_pineview_sdvo = {
248 .dot = { .min = 20000, .max = 400000},
249 .vco = { .min = 1700000, .max = 3500000 },
250 /* Pineview's Ncounter is a ring counter */
251 .n = { .min = 3, .max = 6 },
252 .m = { .min = 2, .max = 256 },
253 /* Pineview only has one combined m divider, which we treat as m2. */
254 .m1 = { .min = 0, .max = 0 },
255 .m2 = { .min = 0, .max = 254 },
256 .p = { .min = 5, .max = 80 },
257 .p1 = { .min = 1, .max = 8 },
258 .p2 = { .dot_limit = 200000,
259 .p2_slow = 10, .p2_fast = 5 },
260 .find_pll = intel_find_best_PLL,
263 static const intel_limit_t intel_limits_pineview_lvds = {
264 .dot = { .min = 20000, .max = 400000 },
265 .vco = { .min = 1700000, .max = 3500000 },
266 .n = { .min = 3, .max = 6 },
267 .m = { .min = 2, .max = 256 },
268 .m1 = { .min = 0, .max = 0 },
269 .m2 = { .min = 0, .max = 254 },
270 .p = { .min = 7, .max = 112 },
271 .p1 = { .min = 1, .max = 8 },
272 .p2 = { .dot_limit = 112000,
273 .p2_slow = 14, .p2_fast = 14 },
274 .find_pll = intel_find_best_PLL,
277 /* Ironlake / Sandybridge
279 * We calculate clock using (register_value + 2) for N/M1/M2, so here
280 * the range value for them is (actual_value - 2).
282 static const intel_limit_t intel_limits_ironlake_dac = {
283 .dot = { .min = 25000, .max = 350000 },
284 .vco = { .min = 1760000, .max = 3510000 },
285 .n = { .min = 1, .max = 5 },
286 .m = { .min = 79, .max = 127 },
287 .m1 = { .min = 12, .max = 22 },
288 .m2 = { .min = 5, .max = 9 },
289 .p = { .min = 5, .max = 80 },
290 .p1 = { .min = 1, .max = 8 },
291 .p2 = { .dot_limit = 225000,
292 .p2_slow = 10, .p2_fast = 5 },
293 .find_pll = intel_g4x_find_best_PLL,
296 static const intel_limit_t intel_limits_ironlake_single_lvds = {
297 .dot = { .min = 25000, .max = 350000 },
298 .vco = { .min = 1760000, .max = 3510000 },
299 .n = { .min = 1, .max = 3 },
300 .m = { .min = 79, .max = 118 },
301 .m1 = { .min = 12, .max = 22 },
302 .m2 = { .min = 5, .max = 9 },
303 .p = { .min = 28, .max = 112 },
304 .p1 = { .min = 2, .max = 8 },
305 .p2 = { .dot_limit = 225000,
306 .p2_slow = 14, .p2_fast = 14 },
307 .find_pll = intel_g4x_find_best_PLL,
310 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
311 .dot = { .min = 25000, .max = 350000 },
312 .vco = { .min = 1760000, .max = 3510000 },
313 .n = { .min = 1, .max = 3 },
314 .m = { .min = 79, .max = 127 },
315 .m1 = { .min = 12, .max = 22 },
316 .m2 = { .min = 5, .max = 9 },
317 .p = { .min = 14, .max = 56 },
318 .p1 = { .min = 2, .max = 8 },
319 .p2 = { .dot_limit = 225000,
320 .p2_slow = 7, .p2_fast = 7 },
321 .find_pll = intel_g4x_find_best_PLL,
324 /* LVDS 100mhz refclk limits. */
325 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
326 .dot = { .min = 25000, .max = 350000 },
327 .vco = { .min = 1760000, .max = 3510000 },
328 .n = { .min = 1, .max = 2 },
329 .m = { .min = 79, .max = 126 },
330 .m1 = { .min = 12, .max = 22 },
331 .m2 = { .min = 5, .max = 9 },
332 .p = { .min = 28, .max = 112 },
333 .p1 = { .min = 2, .max = 8 },
334 .p2 = { .dot_limit = 225000,
335 .p2_slow = 14, .p2_fast = 14 },
336 .find_pll = intel_g4x_find_best_PLL,
339 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
340 .dot = { .min = 25000, .max = 350000 },
341 .vco = { .min = 1760000, .max = 3510000 },
342 .n = { .min = 1, .max = 3 },
343 .m = { .min = 79, .max = 126 },
344 .m1 = { .min = 12, .max = 22 },
345 .m2 = { .min = 5, .max = 9 },
346 .p = { .min = 14, .max = 42 },
347 .p1 = { .min = 2, .max = 6 },
348 .p2 = { .dot_limit = 225000,
349 .p2_slow = 7, .p2_fast = 7 },
350 .find_pll = intel_g4x_find_best_PLL,
353 static const intel_limit_t intel_limits_ironlake_display_port = {
354 .dot = { .min = 25000, .max = 350000 },
355 .vco = { .min = 1760000, .max = 3510000},
356 .n = { .min = 1, .max = 2 },
357 .m = { .min = 81, .max = 90 },
358 .m1 = { .min = 12, .max = 22 },
359 .m2 = { .min = 5, .max = 9 },
360 .p = { .min = 10, .max = 20 },
361 .p1 = { .min = 1, .max = 2},
362 .p2 = { .dot_limit = 0,
363 .p2_slow = 10, .p2_fast = 10 },
364 .find_pll = intel_find_pll_ironlake_dp,
367 static const intel_limit_t intel_limits_vlv_dac = {
368 .dot = { .min = 25000, .max = 270000 },
369 .vco = { .min = 4000000, .max = 6000000 },
370 .n = { .min = 1, .max = 7 },
371 .m = { .min = 22, .max = 450 }, /* guess */
372 .m1 = { .min = 2, .max = 3 },
373 .m2 = { .min = 11, .max = 156 },
374 .p = { .min = 10, .max = 30 },
375 .p1 = { .min = 2, .max = 3 },
376 .p2 = { .dot_limit = 270000,
377 .p2_slow = 2, .p2_fast = 20 },
378 .find_pll = intel_vlv_find_best_pll,
381 static const intel_limit_t intel_limits_vlv_hdmi = {
382 .dot = { .min = 20000, .max = 165000 },
383 .vco = { .min = 5994000, .max = 4000000 },
384 .n = { .min = 1, .max = 7 },
385 .m = { .min = 60, .max = 300 }, /* guess */
386 .m1 = { .min = 2, .max = 3 },
387 .m2 = { .min = 11, .max = 156 },
388 .p = { .min = 10, .max = 30 },
389 .p1 = { .min = 2, .max = 3 },
390 .p2 = { .dot_limit = 270000,
391 .p2_slow = 2, .p2_fast = 20 },
392 .find_pll = intel_vlv_find_best_pll,
395 static const intel_limit_t intel_limits_vlv_dp = {
396 .dot = { .min = 162000, .max = 270000 },
397 .vco = { .min = 5994000, .max = 4000000 },
398 .n = { .min = 1, .max = 7 },
399 .m = { .min = 60, .max = 300 }, /* guess */
400 .m1 = { .min = 2, .max = 3 },
401 .m2 = { .min = 11, .max = 156 },
402 .p = { .min = 10, .max = 30 },
403 .p1 = { .min = 2, .max = 3 },
404 .p2 = { .dot_limit = 270000,
405 .p2_slow = 2, .p2_fast = 20 },
406 .find_pll = intel_vlv_find_best_pll,
409 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
414 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
415 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
416 DRM_ERROR("DPIO idle wait timed out\n");
420 I915_WRITE(DPIO_REG, reg);
421 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
423 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
424 DRM_ERROR("DPIO read wait timed out\n");
427 val = I915_READ(DPIO_DATA);
430 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
434 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
439 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
440 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
441 DRM_ERROR("DPIO idle wait timed out\n");
445 I915_WRITE(DPIO_DATA, val);
446 I915_WRITE(DPIO_REG, reg);
447 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
449 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
450 DRM_ERROR("DPIO write wait timed out\n");
453 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
456 static void vlv_init_dpio(struct drm_device *dev)
458 struct drm_i915_private *dev_priv = dev->dev_private;
460 /* Reset the DPIO config */
461 I915_WRITE(DPIO_CTL, 0);
462 POSTING_READ(DPIO_CTL);
463 I915_WRITE(DPIO_CTL, 1);
464 POSTING_READ(DPIO_CTL);
467 static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
469 DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
473 static const struct dmi_system_id intel_dual_link_lvds[] = {
475 .callback = intel_dual_link_lvds_callback,
476 .ident = "Apple MacBook Pro (Core i5/i7 Series)",
478 DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
479 DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
482 { } /* terminating entry */
485 static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
490 /* use the module option value if specified */
491 if (i915_lvds_channel_mode > 0)
492 return i915_lvds_channel_mode == 2;
494 if (dmi_check_system(intel_dual_link_lvds))
497 if (dev_priv->lvds_val)
498 val = dev_priv->lvds_val;
500 /* BIOS should set the proper LVDS register value at boot, but
501 * in reality, it doesn't set the value when the lid is closed;
502 * we need to check "the value to be set" in VBT when LVDS
503 * register is uninitialized.
505 val = I915_READ(reg);
506 if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
507 val = dev_priv->bios_lvds_val;
508 dev_priv->lvds_val = val;
510 return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
513 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
516 struct drm_device *dev = crtc->dev;
517 struct drm_i915_private *dev_priv = dev->dev_private;
518 const intel_limit_t *limit;
520 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
521 if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
522 /* LVDS dual channel */
523 if (refclk == 100000)
524 limit = &intel_limits_ironlake_dual_lvds_100m;
526 limit = &intel_limits_ironlake_dual_lvds;
528 if (refclk == 100000)
529 limit = &intel_limits_ironlake_single_lvds_100m;
531 limit = &intel_limits_ironlake_single_lvds;
533 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
535 limit = &intel_limits_ironlake_display_port;
537 limit = &intel_limits_ironlake_dac;
542 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
544 struct drm_device *dev = crtc->dev;
545 struct drm_i915_private *dev_priv = dev->dev_private;
546 const intel_limit_t *limit;
548 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
549 if (is_dual_link_lvds(dev_priv, LVDS))
550 /* LVDS with dual channel */
551 limit = &intel_limits_g4x_dual_channel_lvds;
553 /* LVDS with dual channel */
554 limit = &intel_limits_g4x_single_channel_lvds;
555 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
556 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
557 limit = &intel_limits_g4x_hdmi;
558 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
559 limit = &intel_limits_g4x_sdvo;
560 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
561 limit = &intel_limits_g4x_display_port;
562 } else /* The option is for other outputs */
563 limit = &intel_limits_i9xx_sdvo;
568 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
570 struct drm_device *dev = crtc->dev;
571 const intel_limit_t *limit;
573 if (HAS_PCH_SPLIT(dev))
574 limit = intel_ironlake_limit(crtc, refclk);
575 else if (IS_G4X(dev)) {
576 limit = intel_g4x_limit(crtc);
577 } else if (IS_PINEVIEW(dev)) {
578 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
579 limit = &intel_limits_pineview_lvds;
581 limit = &intel_limits_pineview_sdvo;
582 } else if (IS_VALLEYVIEW(dev)) {
583 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG))
584 limit = &intel_limits_vlv_dac;
585 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
586 limit = &intel_limits_vlv_hdmi;
588 limit = &intel_limits_vlv_dp;
589 } else if (!IS_GEN2(dev)) {
590 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
591 limit = &intel_limits_i9xx_lvds;
593 limit = &intel_limits_i9xx_sdvo;
595 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
596 limit = &intel_limits_i8xx_lvds;
598 limit = &intel_limits_i8xx_dvo;
603 /* m1 is reserved as 0 in Pineview, n is a ring counter */
604 static void pineview_clock(int refclk, intel_clock_t *clock)
606 clock->m = clock->m2 + 2;
607 clock->p = clock->p1 * clock->p2;
608 clock->vco = refclk * clock->m / clock->n;
609 clock->dot = clock->vco / clock->p;
612 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
614 if (IS_PINEVIEW(dev)) {
615 pineview_clock(refclk, clock);
618 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
619 clock->p = clock->p1 * clock->p2;
620 clock->vco = refclk * clock->m / (clock->n + 2);
621 clock->dot = clock->vco / clock->p;
625 * Returns whether any output on the specified pipe is of the specified type
627 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
629 struct drm_device *dev = crtc->dev;
630 struct intel_encoder *encoder;
632 for_each_encoder_on_crtc(dev, crtc, encoder)
633 if (encoder->type == type)
639 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
641 * Returns whether the given set of divisors are valid for a given refclk with
642 * the given connectors.
645 static bool intel_PLL_is_valid(struct drm_device *dev,
646 const intel_limit_t *limit,
647 const intel_clock_t *clock)
649 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
650 INTELPllInvalid("p1 out of range\n");
651 if (clock->p < limit->p.min || limit->p.max < clock->p)
652 INTELPllInvalid("p out of range\n");
653 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
654 INTELPllInvalid("m2 out of range\n");
655 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
656 INTELPllInvalid("m1 out of range\n");
657 if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
658 INTELPllInvalid("m1 <= m2\n");
659 if (clock->m < limit->m.min || limit->m.max < clock->m)
660 INTELPllInvalid("m out of range\n");
661 if (clock->n < limit->n.min || limit->n.max < clock->n)
662 INTELPllInvalid("n out of range\n");
663 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
664 INTELPllInvalid("vco out of range\n");
665 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
666 * connector, etc., rather than just a single range.
668 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
669 INTELPllInvalid("dot out of range\n");
675 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
676 int target, int refclk, intel_clock_t *match_clock,
677 intel_clock_t *best_clock)
680 struct drm_device *dev = crtc->dev;
681 struct drm_i915_private *dev_priv = dev->dev_private;
685 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
686 (I915_READ(LVDS)) != 0) {
688 * For LVDS, if the panel is on, just rely on its current
689 * settings for dual-channel. We haven't figured out how to
690 * reliably set up different single/dual channel state, if we
693 if (is_dual_link_lvds(dev_priv, LVDS))
694 clock.p2 = limit->p2.p2_fast;
696 clock.p2 = limit->p2.p2_slow;
698 if (target < limit->p2.dot_limit)
699 clock.p2 = limit->p2.p2_slow;
701 clock.p2 = limit->p2.p2_fast;
704 memset(best_clock, 0, sizeof(*best_clock));
706 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
708 for (clock.m2 = limit->m2.min;
709 clock.m2 <= limit->m2.max; clock.m2++) {
710 /* m1 is always 0 in Pineview */
711 if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
713 for (clock.n = limit->n.min;
714 clock.n <= limit->n.max; clock.n++) {
715 for (clock.p1 = limit->p1.min;
716 clock.p1 <= limit->p1.max; clock.p1++) {
719 intel_clock(dev, refclk, &clock);
720 if (!intel_PLL_is_valid(dev, limit,
724 clock.p != match_clock->p)
727 this_err = abs(clock.dot - target);
728 if (this_err < err) {
737 return (err != target);
741 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
742 int target, int refclk, intel_clock_t *match_clock,
743 intel_clock_t *best_clock)
745 struct drm_device *dev = crtc->dev;
746 struct drm_i915_private *dev_priv = dev->dev_private;
750 /* approximately equals target * 0.00585 */
751 int err_most = (target >> 8) + (target >> 9);
754 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
757 if (HAS_PCH_SPLIT(dev))
761 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
763 clock.p2 = limit->p2.p2_fast;
765 clock.p2 = limit->p2.p2_slow;
767 if (target < limit->p2.dot_limit)
768 clock.p2 = limit->p2.p2_slow;
770 clock.p2 = limit->p2.p2_fast;
773 memset(best_clock, 0, sizeof(*best_clock));
774 max_n = limit->n.max;
775 /* based on hardware requirement, prefer smaller n to precision */
776 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
777 /* based on hardware requirement, prefere larger m1,m2 */
778 for (clock.m1 = limit->m1.max;
779 clock.m1 >= limit->m1.min; clock.m1--) {
780 for (clock.m2 = limit->m2.max;
781 clock.m2 >= limit->m2.min; clock.m2--) {
782 for (clock.p1 = limit->p1.max;
783 clock.p1 >= limit->p1.min; clock.p1--) {
786 intel_clock(dev, refclk, &clock);
787 if (!intel_PLL_is_valid(dev, limit,
791 clock.p != match_clock->p)
794 this_err = abs(clock.dot - target);
795 if (this_err < err_most) {
809 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
810 int target, int refclk, intel_clock_t *match_clock,
811 intel_clock_t *best_clock)
813 struct drm_device *dev = crtc->dev;
816 if (target < 200000) {
829 intel_clock(dev, refclk, &clock);
830 memcpy(best_clock, &clock, sizeof(intel_clock_t));
834 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
836 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
837 int target, int refclk, intel_clock_t *match_clock,
838 intel_clock_t *best_clock)
841 if (target < 200000) {
854 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
855 clock.p = (clock.p1 * clock.p2);
856 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
858 memcpy(best_clock, &clock, sizeof(intel_clock_t));
862 intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
863 int target, int refclk, intel_clock_t *match_clock,
864 intel_clock_t *best_clock)
866 u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
868 u32 updrate, minupdate, fracbits, p;
869 unsigned long bestppm, ppm, absppm;
873 dotclk = target * 1000;
876 fastclk = dotclk / (2*100);
880 n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
881 bestm1 = bestm2 = bestp1 = bestp2 = 0;
883 /* based on hardware requirement, prefer smaller n to precision */
884 for (n = limit->n.min; n <= ((refclk) / minupdate); n++) {
885 updrate = refclk / n;
886 for (p1 = limit->p1.max; p1 > limit->p1.min; p1--) {
887 for (p2 = limit->p2.p2_fast+1; p2 > 0; p2--) {
891 /* based on hardware requirement, prefer bigger m1,m2 values */
892 for (m1 = limit->m1.min; m1 <= limit->m1.max; m1++) {
893 m2 = (((2*(fastclk * p * n / m1 )) +
894 refclk) / (2*refclk));
897 if (vco >= limit->vco.min && vco < limit->vco.max) {
898 ppm = 1000000 * ((vco / p) - fastclk) / fastclk;
899 absppm = (ppm > 0) ? ppm : (-ppm);
900 if (absppm < 100 && ((p1 * p2) > (bestp1 * bestp2))) {
904 if (absppm < bestppm - 10) {
921 best_clock->n = bestn;
922 best_clock->m1 = bestm1;
923 best_clock->m2 = bestm2;
924 best_clock->p1 = bestp1;
925 best_clock->p2 = bestp2;
930 static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
932 struct drm_i915_private *dev_priv = dev->dev_private;
933 u32 frame, frame_reg = PIPEFRAME(pipe);
935 frame = I915_READ(frame_reg);
937 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
938 DRM_DEBUG_KMS("vblank wait timed out\n");
942 * intel_wait_for_vblank - wait for vblank on a given pipe
944 * @pipe: pipe to wait for
946 * Wait for vblank to occur on a given pipe. Needed for various bits of
949 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
951 struct drm_i915_private *dev_priv = dev->dev_private;
952 int pipestat_reg = PIPESTAT(pipe);
954 if (INTEL_INFO(dev)->gen >= 5) {
955 ironlake_wait_for_vblank(dev, pipe);
959 /* Clear existing vblank status. Note this will clear any other
960 * sticky status fields as well.
962 * This races with i915_driver_irq_handler() with the result
963 * that either function could miss a vblank event. Here it is not
964 * fatal, as we will either wait upon the next vblank interrupt or
965 * timeout. Generally speaking intel_wait_for_vblank() is only
966 * called during modeset at which time the GPU should be idle and
967 * should *not* be performing page flips and thus not waiting on
969 * Currently, the result of us stealing a vblank from the irq
970 * handler is that a single frame will be skipped during swapbuffers.
972 I915_WRITE(pipestat_reg,
973 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
975 /* Wait for vblank interrupt bit to set */
976 if (wait_for(I915_READ(pipestat_reg) &
977 PIPE_VBLANK_INTERRUPT_STATUS,
979 DRM_DEBUG_KMS("vblank wait timed out\n");
983 * intel_wait_for_pipe_off - wait for pipe to turn off
985 * @pipe: pipe to wait for
987 * After disabling a pipe, we can't wait for vblank in the usual way,
988 * spinning on the vblank interrupt status bit, since we won't actually
989 * see an interrupt when the pipe is disabled.
992 * wait for the pipe register state bit to turn off
995 * wait for the display line value to settle (it usually
996 * ends up stopping at the start of the next frame).
999 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
1001 struct drm_i915_private *dev_priv = dev->dev_private;
1003 if (INTEL_INFO(dev)->gen >= 4) {
1004 int reg = PIPECONF(pipe);
1006 /* Wait for the Pipe State to go off */
1007 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
1009 DRM_DEBUG_KMS("pipe_off wait timed out\n");
1011 u32 last_line, line_mask;
1012 int reg = PIPEDSL(pipe);
1013 unsigned long timeout = jiffies + msecs_to_jiffies(100);
1016 line_mask = DSL_LINEMASK_GEN2;
1018 line_mask = DSL_LINEMASK_GEN3;
1020 /* Wait for the display line to settle */
1022 last_line = I915_READ(reg) & line_mask;
1024 } while (((I915_READ(reg) & line_mask) != last_line) &&
1025 time_after(timeout, jiffies));
1026 if (time_after(jiffies, timeout))
1027 DRM_DEBUG_KMS("pipe_off wait timed out\n");
1031 static const char *state_string(bool enabled)
1033 return enabled ? "on" : "off";
1036 /* Only for pre-ILK configs */
1037 static void assert_pll(struct drm_i915_private *dev_priv,
1038 enum pipe pipe, bool state)
1045 val = I915_READ(reg);
1046 cur_state = !!(val & DPLL_VCO_ENABLE);
1047 WARN(cur_state != state,
1048 "PLL state assertion failure (expected %s, current %s)\n",
1049 state_string(state), state_string(cur_state));
1051 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
1052 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
1055 static void assert_pch_pll(struct drm_i915_private *dev_priv,
1056 struct intel_pch_pll *pll,
1057 struct intel_crtc *crtc,
1063 if (HAS_PCH_LPT(dev_priv->dev)) {
1064 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
1069 "asserting PCH PLL %s with no PLL\n", state_string(state)))
1072 val = I915_READ(pll->pll_reg);
1073 cur_state = !!(val & DPLL_VCO_ENABLE);
1074 WARN(cur_state != state,
1075 "PCH PLL state for reg %x assertion failure (expected %s, current %s), val=%08x\n",
1076 pll->pll_reg, state_string(state), state_string(cur_state), val);
1078 /* Make sure the selected PLL is correctly attached to the transcoder */
1079 if (crtc && HAS_PCH_CPT(dev_priv->dev)) {
1082 pch_dpll = I915_READ(PCH_DPLL_SEL);
1083 cur_state = pll->pll_reg == _PCH_DPLL_B;
1084 if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state,
1085 "PLL[%d] not attached to this transcoder %d: %08x\n",
1086 cur_state, crtc->pipe, pch_dpll)) {
1087 cur_state = !!(val >> (4*crtc->pipe + 3));
1088 WARN(cur_state != state,
1089 "PLL[%d] not %s on this transcoder %d: %08x\n",
1090 pll->pll_reg == _PCH_DPLL_B,
1091 state_string(state),
1097 #define assert_pch_pll_enabled(d, p, c) assert_pch_pll(d, p, c, true)
1098 #define assert_pch_pll_disabled(d, p, c) assert_pch_pll(d, p, c, false)
1100 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1101 enum pipe pipe, bool state)
1107 if (IS_HASWELL(dev_priv->dev)) {
1108 /* On Haswell, DDI is used instead of FDI_TX_CTL */
1109 reg = DDI_FUNC_CTL(pipe);
1110 val = I915_READ(reg);
1111 cur_state = !!(val & PIPE_DDI_FUNC_ENABLE);
1113 reg = FDI_TX_CTL(pipe);
1114 val = I915_READ(reg);
1115 cur_state = !!(val & FDI_TX_ENABLE);
1117 WARN(cur_state != state,
1118 "FDI TX state assertion failure (expected %s, current %s)\n",
1119 state_string(state), state_string(cur_state));
1121 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1122 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1124 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1125 enum pipe pipe, bool state)
1131 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1132 DRM_ERROR("Attempting to enable FDI_RX on Haswell pipe > 0\n");
1135 reg = FDI_RX_CTL(pipe);
1136 val = I915_READ(reg);
1137 cur_state = !!(val & FDI_RX_ENABLE);
1139 WARN(cur_state != state,
1140 "FDI RX state assertion failure (expected %s, current %s)\n",
1141 state_string(state), state_string(cur_state));
1143 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1144 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1146 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1152 /* ILK FDI PLL is always enabled */
1153 if (dev_priv->info->gen == 5)
1156 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1157 if (IS_HASWELL(dev_priv->dev))
1160 reg = FDI_TX_CTL(pipe);
1161 val = I915_READ(reg);
1162 WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1165 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
1171 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1172 DRM_ERROR("Attempting to enable FDI on Haswell with pipe > 0\n");
1175 reg = FDI_RX_CTL(pipe);
1176 val = I915_READ(reg);
1177 WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
1180 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1183 int pp_reg, lvds_reg;
1185 enum pipe panel_pipe = PIPE_A;
1188 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1189 pp_reg = PCH_PP_CONTROL;
1190 lvds_reg = PCH_LVDS;
1192 pp_reg = PP_CONTROL;
1196 val = I915_READ(pp_reg);
1197 if (!(val & PANEL_POWER_ON) ||
1198 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1201 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1202 panel_pipe = PIPE_B;
1204 WARN(panel_pipe == pipe && locked,
1205 "panel assertion failure, pipe %c regs locked\n",
1209 void assert_pipe(struct drm_i915_private *dev_priv,
1210 enum pipe pipe, bool state)
1216 /* if we need the pipe A quirk it must be always on */
1217 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1220 reg = PIPECONF(pipe);
1221 val = I915_READ(reg);
1222 cur_state = !!(val & PIPECONF_ENABLE);
1223 WARN(cur_state != state,
1224 "pipe %c assertion failure (expected %s, current %s)\n",
1225 pipe_name(pipe), state_string(state), state_string(cur_state));
1228 static void assert_plane(struct drm_i915_private *dev_priv,
1229 enum plane plane, bool state)
1235 reg = DSPCNTR(plane);
1236 val = I915_READ(reg);
1237 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1238 WARN(cur_state != state,
1239 "plane %c assertion failure (expected %s, current %s)\n",
1240 plane_name(plane), state_string(state), state_string(cur_state));
1243 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1244 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1246 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1253 /* Planes are fixed to pipes on ILK+ */
1254 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1255 reg = DSPCNTR(pipe);
1256 val = I915_READ(reg);
1257 WARN((val & DISPLAY_PLANE_ENABLE),
1258 "plane %c assertion failure, should be disabled but not\n",
1263 /* Need to check both planes against the pipe */
1264 for (i = 0; i < 2; i++) {
1266 val = I915_READ(reg);
1267 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1268 DISPPLANE_SEL_PIPE_SHIFT;
1269 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1270 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1271 plane_name(i), pipe_name(pipe));
1275 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1280 if (HAS_PCH_LPT(dev_priv->dev)) {
1281 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1285 val = I915_READ(PCH_DREF_CONTROL);
1286 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1287 DREF_SUPERSPREAD_SOURCE_MASK));
1288 WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1291 static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
1298 reg = TRANSCONF(pipe);
1299 val = I915_READ(reg);
1300 enabled = !!(val & TRANS_ENABLE);
1302 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1306 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1307 enum pipe pipe, u32 port_sel, u32 val)
1309 if ((val & DP_PORT_EN) == 0)
1312 if (HAS_PCH_CPT(dev_priv->dev)) {
1313 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1314 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1315 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1318 if ((val & DP_PIPE_MASK) != (pipe << 30))
1324 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1325 enum pipe pipe, u32 val)
1327 if ((val & PORT_ENABLE) == 0)
1330 if (HAS_PCH_CPT(dev_priv->dev)) {
1331 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1334 if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
1340 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1341 enum pipe pipe, u32 val)
1343 if ((val & LVDS_PORT_EN) == 0)
1346 if (HAS_PCH_CPT(dev_priv->dev)) {
1347 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1350 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1356 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1357 enum pipe pipe, u32 val)
1359 if ((val & ADPA_DAC_ENABLE) == 0)
1361 if (HAS_PCH_CPT(dev_priv->dev)) {
1362 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1365 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1371 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1372 enum pipe pipe, int reg, u32 port_sel)
1374 u32 val = I915_READ(reg);
1375 WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1376 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1377 reg, pipe_name(pipe));
1379 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
1380 "IBX PCH dp port still using transcoder B\n");
1383 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1384 enum pipe pipe, int reg)
1386 u32 val = I915_READ(reg);
1387 WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
1388 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1389 reg, pipe_name(pipe));
1391 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT),
1392 "IBX PCH hdmi port still using transcoder B\n");
1395 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1401 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1402 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1403 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1406 val = I915_READ(reg);
1407 WARN(adpa_pipe_enabled(dev_priv, val, pipe),
1408 "PCH VGA enabled on transcoder %c, should be disabled\n",
1412 val = I915_READ(reg);
1413 WARN(lvds_pipe_enabled(dev_priv, val, pipe),
1414 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1417 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
1418 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
1419 assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
1423 * intel_enable_pll - enable a PLL
1424 * @dev_priv: i915 private structure
1425 * @pipe: pipe PLL to enable
1427 * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to
1428 * make sure the PLL reg is writable first though, since the panel write
1429 * protect mechanism may be enabled.
1431 * Note! This is for pre-ILK only.
1433 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1438 /* No really, not for ILK+ */
1439 BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
1441 /* PLL is protected by panel, make sure we can write it */
1442 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1443 assert_panel_unlocked(dev_priv, pipe);
1446 val = I915_READ(reg);
1447 val |= DPLL_VCO_ENABLE;
1449 /* We do this three times for luck */
1450 I915_WRITE(reg, val);
1452 udelay(150); /* wait for warmup */
1453 I915_WRITE(reg, val);
1455 udelay(150); /* wait for warmup */
1456 I915_WRITE(reg, val);
1458 udelay(150); /* wait for warmup */
1462 * intel_disable_pll - disable a PLL
1463 * @dev_priv: i915 private structure
1464 * @pipe: pipe PLL to disable
1466 * Disable the PLL for @pipe, making sure the pipe is off first.
1468 * Note! This is for pre-ILK only.
1470 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1475 /* Don't disable pipe A or pipe A PLLs if needed */
1476 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1479 /* Make sure the pipe isn't still relying on us */
1480 assert_pipe_disabled(dev_priv, pipe);
1483 val = I915_READ(reg);
1484 val &= ~DPLL_VCO_ENABLE;
1485 I915_WRITE(reg, val);
1491 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value)
1493 unsigned long flags;
1495 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
1496 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1498 DRM_ERROR("timeout waiting for SBI to become ready\n");
1502 I915_WRITE(SBI_ADDR,
1504 I915_WRITE(SBI_DATA,
1506 I915_WRITE(SBI_CTL_STAT,
1510 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1512 DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
1517 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
1521 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg)
1523 unsigned long flags;
1526 spin_lock_irqsave(&dev_priv->dpio_lock, flags);
1527 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
1529 DRM_ERROR("timeout waiting for SBI to become ready\n");
1533 I915_WRITE(SBI_ADDR,
1535 I915_WRITE(SBI_CTL_STAT,
1539 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
1541 DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
1545 value = I915_READ(SBI_DATA);
1548 spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
1553 * intel_enable_pch_pll - enable PCH PLL
1554 * @dev_priv: i915 private structure
1555 * @pipe: pipe PLL to enable
1557 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1558 * drives the transcoder clock.
1560 static void intel_enable_pch_pll(struct intel_crtc *intel_crtc)
1562 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1563 struct intel_pch_pll *pll;
1567 /* PCH PLLs only available on ILK, SNB and IVB */
1568 BUG_ON(dev_priv->info->gen < 5);
1569 pll = intel_crtc->pch_pll;
1573 if (WARN_ON(pll->refcount == 0))
1576 DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n",
1577 pll->pll_reg, pll->active, pll->on,
1578 intel_crtc->base.base.id);
1580 /* PCH refclock must be enabled first */
1581 assert_pch_refclk_enabled(dev_priv);
1583 if (pll->active++ && pll->on) {
1584 assert_pch_pll_enabled(dev_priv, pll, NULL);
1588 DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg);
1591 val = I915_READ(reg);
1592 val |= DPLL_VCO_ENABLE;
1593 I915_WRITE(reg, val);
1600 static void intel_disable_pch_pll(struct intel_crtc *intel_crtc)
1602 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1603 struct intel_pch_pll *pll = intel_crtc->pch_pll;
1607 /* PCH only available on ILK+ */
1608 BUG_ON(dev_priv->info->gen < 5);
1612 if (WARN_ON(pll->refcount == 0))
1615 DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n",
1616 pll->pll_reg, pll->active, pll->on,
1617 intel_crtc->base.base.id);
1619 if (WARN_ON(pll->active == 0)) {
1620 assert_pch_pll_disabled(dev_priv, pll, NULL);
1624 if (--pll->active) {
1625 assert_pch_pll_enabled(dev_priv, pll, NULL);
1629 DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
1631 /* Make sure transcoder isn't still depending on us */
1632 assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
1635 val = I915_READ(reg);
1636 val &= ~DPLL_VCO_ENABLE;
1637 I915_WRITE(reg, val);
1644 static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
1648 u32 val, pipeconf_val;
1649 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1651 /* PCH only available on ILK+ */
1652 BUG_ON(dev_priv->info->gen < 5);
1654 /* Make sure PCH DPLL is enabled */
1655 assert_pch_pll_enabled(dev_priv,
1656 to_intel_crtc(crtc)->pch_pll,
1657 to_intel_crtc(crtc));
1659 /* FDI must be feeding us bits for PCH ports */
1660 assert_fdi_tx_enabled(dev_priv, pipe);
1661 assert_fdi_rx_enabled(dev_priv, pipe);
1663 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1664 DRM_ERROR("Attempting to enable transcoder on Haswell with pipe > 0\n");
1667 reg = TRANSCONF(pipe);
1668 val = I915_READ(reg);
1669 pipeconf_val = I915_READ(PIPECONF(pipe));
1671 if (HAS_PCH_IBX(dev_priv->dev)) {
1673 * make the BPC in transcoder be consistent with
1674 * that in pipeconf reg.
1676 val &= ~PIPE_BPC_MASK;
1677 val |= pipeconf_val & PIPE_BPC_MASK;
1680 val &= ~TRANS_INTERLACE_MASK;
1681 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1682 if (HAS_PCH_IBX(dev_priv->dev) &&
1683 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1684 val |= TRANS_LEGACY_INTERLACED_ILK;
1686 val |= TRANS_INTERLACED;
1688 val |= TRANS_PROGRESSIVE;
1690 I915_WRITE(reg, val | TRANS_ENABLE);
1691 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1692 DRM_ERROR("failed to enable transcoder %d\n", pipe);
1695 static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
1701 /* FDI relies on the transcoder */
1702 assert_fdi_tx_disabled(dev_priv, pipe);
1703 assert_fdi_rx_disabled(dev_priv, pipe);
1705 /* Ports must be off as well */
1706 assert_pch_ports_disabled(dev_priv, pipe);
1708 reg = TRANSCONF(pipe);
1709 val = I915_READ(reg);
1710 val &= ~TRANS_ENABLE;
1711 I915_WRITE(reg, val);
1712 /* wait for PCH transcoder off, transcoder state */
1713 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1714 DRM_ERROR("failed to disable transcoder %d\n", pipe);
1718 * intel_enable_pipe - enable a pipe, asserting requirements
1719 * @dev_priv: i915 private structure
1720 * @pipe: pipe to enable
1721 * @pch_port: on ILK+, is this pipe driving a PCH port or not
1723 * Enable @pipe, making sure that various hardware specific requirements
1724 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1726 * @pipe should be %PIPE_A or %PIPE_B.
1728 * Will wait until the pipe is actually running (i.e. first vblank) before
1731 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1738 * A pipe without a PLL won't actually be able to drive bits from
1739 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1742 if (!HAS_PCH_SPLIT(dev_priv->dev))
1743 assert_pll_enabled(dev_priv, pipe);
1746 /* if driving the PCH, we need FDI enabled */
1747 assert_fdi_rx_pll_enabled(dev_priv, pipe);
1748 assert_fdi_tx_pll_enabled(dev_priv, pipe);
1750 /* FIXME: assert CPU port conditions for SNB+ */
1753 reg = PIPECONF(pipe);
1754 val = I915_READ(reg);
1755 if (val & PIPECONF_ENABLE)
1758 I915_WRITE(reg, val | PIPECONF_ENABLE);
1759 intel_wait_for_vblank(dev_priv->dev, pipe);
1763 * intel_disable_pipe - disable a pipe, asserting requirements
1764 * @dev_priv: i915 private structure
1765 * @pipe: pipe to disable
1767 * Disable @pipe, making sure that various hardware specific requirements
1768 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1770 * @pipe should be %PIPE_A or %PIPE_B.
1772 * Will wait until the pipe has shut down before returning.
1774 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1781 * Make sure planes won't keep trying to pump pixels to us,
1782 * or we might hang the display.
1784 assert_planes_disabled(dev_priv, pipe);
1786 /* Don't disable pipe A or pipe A PLLs if needed */
1787 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1790 reg = PIPECONF(pipe);
1791 val = I915_READ(reg);
1792 if ((val & PIPECONF_ENABLE) == 0)
1795 I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1796 intel_wait_for_pipe_off(dev_priv->dev, pipe);
1800 * Plane regs are double buffered, going from enabled->disabled needs a
1801 * trigger in order to latch. The display address reg provides this.
1803 void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1806 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1807 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1811 * intel_enable_plane - enable a display plane on a given pipe
1812 * @dev_priv: i915 private structure
1813 * @plane: plane to enable
1814 * @pipe: pipe being fed
1816 * Enable @plane on @pipe, making sure that @pipe is running first.
1818 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1819 enum plane plane, enum pipe pipe)
1824 /* If the pipe isn't enabled, we can't pump pixels and may hang */
1825 assert_pipe_enabled(dev_priv, pipe);
1827 reg = DSPCNTR(plane);
1828 val = I915_READ(reg);
1829 if (val & DISPLAY_PLANE_ENABLE)
1832 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1833 intel_flush_display_plane(dev_priv, plane);
1834 intel_wait_for_vblank(dev_priv->dev, pipe);
1838 * intel_disable_plane - disable a display plane
1839 * @dev_priv: i915 private structure
1840 * @plane: plane to disable
1841 * @pipe: pipe consuming the data
1843 * Disable @plane; should be an independent operation.
1845 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1846 enum plane plane, enum pipe pipe)
1851 reg = DSPCNTR(plane);
1852 val = I915_READ(reg);
1853 if ((val & DISPLAY_PLANE_ENABLE) == 0)
1856 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1857 intel_flush_display_plane(dev_priv, plane);
1858 intel_wait_for_vblank(dev_priv->dev, pipe);
1861 static void disable_pch_dp(struct drm_i915_private *dev_priv,
1862 enum pipe pipe, int reg, u32 port_sel)
1864 u32 val = I915_READ(reg);
1865 if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
1866 DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
1867 I915_WRITE(reg, val & ~DP_PORT_EN);
1871 static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
1872 enum pipe pipe, int reg)
1874 u32 val = I915_READ(reg);
1875 if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
1876 DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
1878 I915_WRITE(reg, val & ~PORT_ENABLE);
1882 /* Disable any ports connected to this transcoder */
1883 static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
1888 val = I915_READ(PCH_PP_CONTROL);
1889 I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
1891 disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1892 disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1893 disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1896 val = I915_READ(reg);
1897 if (adpa_pipe_enabled(dev_priv, val, pipe))
1898 I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
1901 val = I915_READ(reg);
1902 if (lvds_pipe_enabled(dev_priv, val, pipe)) {
1903 DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
1904 I915_WRITE(reg, val & ~LVDS_PORT_EN);
1909 disable_pch_hdmi(dev_priv, pipe, HDMIB);
1910 disable_pch_hdmi(dev_priv, pipe, HDMIC);
1911 disable_pch_hdmi(dev_priv, pipe, HDMID);
1915 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1916 struct drm_i915_gem_object *obj,
1917 struct intel_ring_buffer *pipelined)
1919 struct drm_i915_private *dev_priv = dev->dev_private;
1923 switch (obj->tiling_mode) {
1924 case I915_TILING_NONE:
1925 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1926 alignment = 128 * 1024;
1927 else if (INTEL_INFO(dev)->gen >= 4)
1928 alignment = 4 * 1024;
1930 alignment = 64 * 1024;
1933 /* pin() will align the object as required by fence */
1937 /* FIXME: Is this true? */
1938 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1944 dev_priv->mm.interruptible = false;
1945 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1947 goto err_interruptible;
1949 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1950 * fence, whereas 965+ only requires a fence if using
1951 * framebuffer compression. For simplicity, we always install
1952 * a fence as the cost is not that onerous.
1954 ret = i915_gem_object_get_fence(obj);
1958 i915_gem_object_pin_fence(obj);
1960 dev_priv->mm.interruptible = true;
1964 i915_gem_object_unpin(obj);
1966 dev_priv->mm.interruptible = true;
1970 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
1972 i915_gem_object_unpin_fence(obj);
1973 i915_gem_object_unpin(obj);
1976 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
1977 * is assumed to be a power-of-two. */
1978 static unsigned long gen4_compute_dspaddr_offset_xtiled(int *x, int *y,
1982 int tile_rows, tiles;
1986 tiles = *x / (512/bpp);
1989 return tile_rows * pitch * 8 + tiles * 4096;
1992 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
1995 struct drm_device *dev = crtc->dev;
1996 struct drm_i915_private *dev_priv = dev->dev_private;
1997 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1998 struct intel_framebuffer *intel_fb;
1999 struct drm_i915_gem_object *obj;
2000 int plane = intel_crtc->plane;
2001 unsigned long linear_offset;
2010 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2014 intel_fb = to_intel_framebuffer(fb);
2015 obj = intel_fb->obj;
2017 reg = DSPCNTR(plane);
2018 dspcntr = I915_READ(reg);
2019 /* Mask out pixel format bits in case we change it */
2020 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2021 switch (fb->bits_per_pixel) {
2023 dspcntr |= DISPPLANE_8BPP;
2026 if (fb->depth == 15)
2027 dspcntr |= DISPPLANE_15_16BPP;
2029 dspcntr |= DISPPLANE_16BPP;
2033 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
2036 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
2039 if (INTEL_INFO(dev)->gen >= 4) {
2040 if (obj->tiling_mode != I915_TILING_NONE)
2041 dspcntr |= DISPPLANE_TILED;
2043 dspcntr &= ~DISPPLANE_TILED;
2046 I915_WRITE(reg, dspcntr);
2048 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2050 if (INTEL_INFO(dev)->gen >= 4) {
2051 intel_crtc->dspaddr_offset =
2052 gen4_compute_dspaddr_offset_xtiled(&x, &y,
2053 fb->bits_per_pixel / 8,
2055 linear_offset -= intel_crtc->dspaddr_offset;
2057 intel_crtc->dspaddr_offset = linear_offset;
2060 DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2061 obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2062 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2063 if (INTEL_INFO(dev)->gen >= 4) {
2064 I915_MODIFY_DISPBASE(DSPSURF(plane),
2065 obj->gtt_offset + intel_crtc->dspaddr_offset);
2066 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2067 I915_WRITE(DSPLINOFF(plane), linear_offset);
2069 I915_WRITE(DSPADDR(plane), obj->gtt_offset + linear_offset);
2075 static int ironlake_update_plane(struct drm_crtc *crtc,
2076 struct drm_framebuffer *fb, int x, int y)
2078 struct drm_device *dev = crtc->dev;
2079 struct drm_i915_private *dev_priv = dev->dev_private;
2080 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2081 struct intel_framebuffer *intel_fb;
2082 struct drm_i915_gem_object *obj;
2083 int plane = intel_crtc->plane;
2084 unsigned long linear_offset;
2094 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2098 intel_fb = to_intel_framebuffer(fb);
2099 obj = intel_fb->obj;
2101 reg = DSPCNTR(plane);
2102 dspcntr = I915_READ(reg);
2103 /* Mask out pixel format bits in case we change it */
2104 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2105 switch (fb->bits_per_pixel) {
2107 dspcntr |= DISPPLANE_8BPP;
2110 if (fb->depth != 16)
2113 dspcntr |= DISPPLANE_16BPP;
2117 if (fb->depth == 24)
2118 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
2119 else if (fb->depth == 30)
2120 dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
2125 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
2129 if (obj->tiling_mode != I915_TILING_NONE)
2130 dspcntr |= DISPPLANE_TILED;
2132 dspcntr &= ~DISPPLANE_TILED;
2135 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2137 I915_WRITE(reg, dspcntr);
2139 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2140 intel_crtc->dspaddr_offset =
2141 gen4_compute_dspaddr_offset_xtiled(&x, &y,
2142 fb->bits_per_pixel / 8,
2144 linear_offset -= intel_crtc->dspaddr_offset;
2146 DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2147 obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2148 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2149 I915_MODIFY_DISPBASE(DSPSURF(plane),
2150 obj->gtt_offset + intel_crtc->dspaddr_offset);
2151 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2152 I915_WRITE(DSPLINOFF(plane), linear_offset);
2158 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2160 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2161 int x, int y, enum mode_set_atomic state)
2163 struct drm_device *dev = crtc->dev;
2164 struct drm_i915_private *dev_priv = dev->dev_private;
2166 if (dev_priv->display.disable_fbc)
2167 dev_priv->display.disable_fbc(dev);
2168 intel_increase_pllclock(crtc);
2170 return dev_priv->display.update_plane(crtc, fb, x, y);
2174 intel_finish_fb(struct drm_framebuffer *old_fb)
2176 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2177 struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2178 bool was_interruptible = dev_priv->mm.interruptible;
2181 wait_event(dev_priv->pending_flip_queue,
2182 atomic_read(&dev_priv->mm.wedged) ||
2183 atomic_read(&obj->pending_flip) == 0);
2185 /* Big Hammer, we also need to ensure that any pending
2186 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2187 * current scanout is retired before unpinning the old
2190 * This should only fail upon a hung GPU, in which case we
2191 * can safely continue.
2193 dev_priv->mm.interruptible = false;
2194 ret = i915_gem_object_finish_gpu(obj);
2195 dev_priv->mm.interruptible = was_interruptible;
2201 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2202 struct drm_framebuffer *old_fb)
2204 struct drm_device *dev = crtc->dev;
2205 struct drm_i915_private *dev_priv = dev->dev_private;
2206 struct drm_i915_master_private *master_priv;
2207 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2212 DRM_ERROR("No FB bound\n");
2216 if(intel_crtc->plane > dev_priv->num_pipe) {
2217 DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
2219 dev_priv->num_pipe);
2223 mutex_lock(&dev->struct_mutex);
2224 ret = intel_pin_and_fence_fb_obj(dev,
2225 to_intel_framebuffer(crtc->fb)->obj,
2228 mutex_unlock(&dev->struct_mutex);
2229 DRM_ERROR("pin & fence failed\n");
2234 intel_finish_fb(old_fb);
2236 ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y);
2238 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
2239 mutex_unlock(&dev->struct_mutex);
2240 DRM_ERROR("failed to update base address\n");
2245 intel_wait_for_vblank(dev, intel_crtc->pipe);
2246 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2249 intel_update_fbc(dev);
2250 mutex_unlock(&dev->struct_mutex);
2252 if (!dev->primary->master)
2255 master_priv = dev->primary->master->driver_priv;
2256 if (!master_priv->sarea_priv)
2259 if (intel_crtc->pipe) {
2260 master_priv->sarea_priv->pipeB_x = x;
2261 master_priv->sarea_priv->pipeB_y = y;
2263 master_priv->sarea_priv->pipeA_x = x;
2264 master_priv->sarea_priv->pipeA_y = y;
2270 static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
2272 struct drm_device *dev = crtc->dev;
2273 struct drm_i915_private *dev_priv = dev->dev_private;
2276 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
2277 dpa_ctl = I915_READ(DP_A);
2278 dpa_ctl &= ~DP_PLL_FREQ_MASK;
2280 if (clock < 200000) {
2282 dpa_ctl |= DP_PLL_FREQ_160MHZ;
2283 /* workaround for 160Mhz:
2284 1) program 0x4600c bits 15:0 = 0x8124
2285 2) program 0x46010 bit 0 = 1
2286 3) program 0x46034 bit 24 = 1
2287 4) program 0x64000 bit 14 = 1
2289 temp = I915_READ(0x4600c);
2291 I915_WRITE(0x4600c, temp | 0x8124);
2293 temp = I915_READ(0x46010);
2294 I915_WRITE(0x46010, temp | 1);
2296 temp = I915_READ(0x46034);
2297 I915_WRITE(0x46034, temp | (1 << 24));
2299 dpa_ctl |= DP_PLL_FREQ_270MHZ;
2301 I915_WRITE(DP_A, dpa_ctl);
2307 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2309 struct drm_device *dev = crtc->dev;
2310 struct drm_i915_private *dev_priv = dev->dev_private;
2311 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2312 int pipe = intel_crtc->pipe;
2315 /* enable normal train */
2316 reg = FDI_TX_CTL(pipe);
2317 temp = I915_READ(reg);
2318 if (IS_IVYBRIDGE(dev)) {
2319 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2320 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2322 temp &= ~FDI_LINK_TRAIN_NONE;
2323 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2325 I915_WRITE(reg, temp);
2327 reg = FDI_RX_CTL(pipe);
2328 temp = I915_READ(reg);
2329 if (HAS_PCH_CPT(dev)) {
2330 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2331 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2333 temp &= ~FDI_LINK_TRAIN_NONE;
2334 temp |= FDI_LINK_TRAIN_NONE;
2336 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2338 /* wait one idle pattern time */
2342 /* IVB wants error correction enabled */
2343 if (IS_IVYBRIDGE(dev))
2344 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2345 FDI_FE_ERRC_ENABLE);
2348 static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
2350 struct drm_i915_private *dev_priv = dev->dev_private;
2351 u32 flags = I915_READ(SOUTH_CHICKEN1);
2353 flags |= FDI_PHASE_SYNC_OVR(pipe);
2354 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
2355 flags |= FDI_PHASE_SYNC_EN(pipe);
2356 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
2357 POSTING_READ(SOUTH_CHICKEN1);
2360 /* The FDI link training functions for ILK/Ibexpeak. */
2361 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2363 struct drm_device *dev = crtc->dev;
2364 struct drm_i915_private *dev_priv = dev->dev_private;
2365 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2366 int pipe = intel_crtc->pipe;
2367 int plane = intel_crtc->plane;
2368 u32 reg, temp, tries;
2370 /* FDI needs bits from pipe & plane first */
2371 assert_pipe_enabled(dev_priv, pipe);
2372 assert_plane_enabled(dev_priv, plane);
2374 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2376 reg = FDI_RX_IMR(pipe);
2377 temp = I915_READ(reg);
2378 temp &= ~FDI_RX_SYMBOL_LOCK;
2379 temp &= ~FDI_RX_BIT_LOCK;
2380 I915_WRITE(reg, temp);
2384 /* enable CPU FDI TX and PCH FDI RX */
2385 reg = FDI_TX_CTL(pipe);
2386 temp = I915_READ(reg);
2388 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2389 temp &= ~FDI_LINK_TRAIN_NONE;
2390 temp |= FDI_LINK_TRAIN_PATTERN_1;
2391 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2393 reg = FDI_RX_CTL(pipe);
2394 temp = I915_READ(reg);
2395 temp &= ~FDI_LINK_TRAIN_NONE;
2396 temp |= FDI_LINK_TRAIN_PATTERN_1;
2397 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2402 /* Ironlake workaround, enable clock pointer after FDI enable*/
2403 if (HAS_PCH_IBX(dev)) {
2404 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2405 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2406 FDI_RX_PHASE_SYNC_POINTER_EN);
2409 reg = FDI_RX_IIR(pipe);
2410 for (tries = 0; tries < 5; tries++) {
2411 temp = I915_READ(reg);
2412 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2414 if ((temp & FDI_RX_BIT_LOCK)) {
2415 DRM_DEBUG_KMS("FDI train 1 done.\n");
2416 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2421 DRM_ERROR("FDI train 1 fail!\n");
2424 reg = FDI_TX_CTL(pipe);
2425 temp = I915_READ(reg);
2426 temp &= ~FDI_LINK_TRAIN_NONE;
2427 temp |= FDI_LINK_TRAIN_PATTERN_2;
2428 I915_WRITE(reg, temp);
2430 reg = FDI_RX_CTL(pipe);
2431 temp = I915_READ(reg);
2432 temp &= ~FDI_LINK_TRAIN_NONE;
2433 temp |= FDI_LINK_TRAIN_PATTERN_2;
2434 I915_WRITE(reg, temp);
2439 reg = FDI_RX_IIR(pipe);
2440 for (tries = 0; tries < 5; tries++) {
2441 temp = I915_READ(reg);
2442 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2444 if (temp & FDI_RX_SYMBOL_LOCK) {
2445 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2446 DRM_DEBUG_KMS("FDI train 2 done.\n");
2451 DRM_ERROR("FDI train 2 fail!\n");
2453 DRM_DEBUG_KMS("FDI train done\n");
2457 static const int snb_b_fdi_train_param[] = {
2458 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2459 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2460 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2461 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2464 /* The FDI link training functions for SNB/Cougarpoint. */
2465 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2467 struct drm_device *dev = crtc->dev;
2468 struct drm_i915_private *dev_priv = dev->dev_private;
2469 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2470 int pipe = intel_crtc->pipe;
2471 u32 reg, temp, i, retry;
2473 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2475 reg = FDI_RX_IMR(pipe);
2476 temp = I915_READ(reg);
2477 temp &= ~FDI_RX_SYMBOL_LOCK;
2478 temp &= ~FDI_RX_BIT_LOCK;
2479 I915_WRITE(reg, temp);
2484 /* enable CPU FDI TX and PCH FDI RX */
2485 reg = FDI_TX_CTL(pipe);
2486 temp = I915_READ(reg);
2488 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2489 temp &= ~FDI_LINK_TRAIN_NONE;
2490 temp |= FDI_LINK_TRAIN_PATTERN_1;
2491 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2493 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2494 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2496 reg = FDI_RX_CTL(pipe);
2497 temp = I915_READ(reg);
2498 if (HAS_PCH_CPT(dev)) {
2499 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2500 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2502 temp &= ~FDI_LINK_TRAIN_NONE;
2503 temp |= FDI_LINK_TRAIN_PATTERN_1;
2505 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2510 if (HAS_PCH_CPT(dev))
2511 cpt_phase_pointer_enable(dev, pipe);
2513 for (i = 0; i < 4; i++) {
2514 reg = FDI_TX_CTL(pipe);
2515 temp = I915_READ(reg);
2516 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2517 temp |= snb_b_fdi_train_param[i];
2518 I915_WRITE(reg, temp);
2523 for (retry = 0; retry < 5; retry++) {
2524 reg = FDI_RX_IIR(pipe);
2525 temp = I915_READ(reg);
2526 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2527 if (temp & FDI_RX_BIT_LOCK) {
2528 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2529 DRM_DEBUG_KMS("FDI train 1 done.\n");
2538 DRM_ERROR("FDI train 1 fail!\n");
2541 reg = FDI_TX_CTL(pipe);
2542 temp = I915_READ(reg);
2543 temp &= ~FDI_LINK_TRAIN_NONE;
2544 temp |= FDI_LINK_TRAIN_PATTERN_2;
2546 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2548 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2550 I915_WRITE(reg, temp);
2552 reg = FDI_RX_CTL(pipe);
2553 temp = I915_READ(reg);
2554 if (HAS_PCH_CPT(dev)) {
2555 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2556 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2558 temp &= ~FDI_LINK_TRAIN_NONE;
2559 temp |= FDI_LINK_TRAIN_PATTERN_2;
2561 I915_WRITE(reg, temp);
2566 for (i = 0; i < 4; i++) {
2567 reg = FDI_TX_CTL(pipe);
2568 temp = I915_READ(reg);
2569 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2570 temp |= snb_b_fdi_train_param[i];
2571 I915_WRITE(reg, temp);
2576 for (retry = 0; retry < 5; retry++) {
2577 reg = FDI_RX_IIR(pipe);
2578 temp = I915_READ(reg);
2579 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2580 if (temp & FDI_RX_SYMBOL_LOCK) {
2581 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2582 DRM_DEBUG_KMS("FDI train 2 done.\n");
2591 DRM_ERROR("FDI train 2 fail!\n");
2593 DRM_DEBUG_KMS("FDI train done.\n");
2596 /* Manual link training for Ivy Bridge A0 parts */
2597 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2599 struct drm_device *dev = crtc->dev;
2600 struct drm_i915_private *dev_priv = dev->dev_private;
2601 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2602 int pipe = intel_crtc->pipe;
2605 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2607 reg = FDI_RX_IMR(pipe);
2608 temp = I915_READ(reg);
2609 temp &= ~FDI_RX_SYMBOL_LOCK;
2610 temp &= ~FDI_RX_BIT_LOCK;
2611 I915_WRITE(reg, temp);
2616 /* enable CPU FDI TX and PCH FDI RX */
2617 reg = FDI_TX_CTL(pipe);
2618 temp = I915_READ(reg);
2620 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2621 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2622 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2623 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2624 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2625 temp |= FDI_COMPOSITE_SYNC;
2626 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2628 reg = FDI_RX_CTL(pipe);
2629 temp = I915_READ(reg);
2630 temp &= ~FDI_LINK_TRAIN_AUTO;
2631 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2632 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2633 temp |= FDI_COMPOSITE_SYNC;
2634 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2639 if (HAS_PCH_CPT(dev))
2640 cpt_phase_pointer_enable(dev, pipe);
2642 for (i = 0; i < 4; i++) {
2643 reg = FDI_TX_CTL(pipe);
2644 temp = I915_READ(reg);
2645 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2646 temp |= snb_b_fdi_train_param[i];
2647 I915_WRITE(reg, temp);
2652 reg = FDI_RX_IIR(pipe);
2653 temp = I915_READ(reg);
2654 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2656 if (temp & FDI_RX_BIT_LOCK ||
2657 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2658 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2659 DRM_DEBUG_KMS("FDI train 1 done.\n");
2664 DRM_ERROR("FDI train 1 fail!\n");
2667 reg = FDI_TX_CTL(pipe);
2668 temp = I915_READ(reg);
2669 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2670 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2671 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2672 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2673 I915_WRITE(reg, temp);
2675 reg = FDI_RX_CTL(pipe);
2676 temp = I915_READ(reg);
2677 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2678 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2679 I915_WRITE(reg, temp);
2684 for (i = 0; i < 4; i++) {
2685 reg = FDI_TX_CTL(pipe);
2686 temp = I915_READ(reg);
2687 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2688 temp |= snb_b_fdi_train_param[i];
2689 I915_WRITE(reg, temp);
2694 reg = FDI_RX_IIR(pipe);
2695 temp = I915_READ(reg);
2696 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2698 if (temp & FDI_RX_SYMBOL_LOCK) {
2699 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2700 DRM_DEBUG_KMS("FDI train 2 done.\n");
2705 DRM_ERROR("FDI train 2 fail!\n");
2707 DRM_DEBUG_KMS("FDI train done.\n");
2710 static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
2712 struct drm_device *dev = crtc->dev;
2713 struct drm_i915_private *dev_priv = dev->dev_private;
2714 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2715 int pipe = intel_crtc->pipe;
2718 /* Write the TU size bits so error detection works */
2719 I915_WRITE(FDI_RX_TUSIZE1(pipe),
2720 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
2722 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2723 reg = FDI_RX_CTL(pipe);
2724 temp = I915_READ(reg);
2725 temp &= ~((0x7 << 19) | (0x7 << 16));
2726 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2727 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2728 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2733 /* Switch from Rawclk to PCDclk */
2734 temp = I915_READ(reg);
2735 I915_WRITE(reg, temp | FDI_PCDCLK);
2740 /* On Haswell, the PLL configuration for ports and pipes is handled
2741 * separately, as part of DDI setup */
2742 if (!IS_HASWELL(dev)) {
2743 /* Enable CPU FDI TX PLL, always on for Ironlake */
2744 reg = FDI_TX_CTL(pipe);
2745 temp = I915_READ(reg);
2746 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2747 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2755 static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
2757 struct drm_i915_private *dev_priv = dev->dev_private;
2758 u32 flags = I915_READ(SOUTH_CHICKEN1);
2760 flags &= ~(FDI_PHASE_SYNC_EN(pipe));
2761 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
2762 flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
2763 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
2764 POSTING_READ(SOUTH_CHICKEN1);
2766 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2768 struct drm_device *dev = crtc->dev;
2769 struct drm_i915_private *dev_priv = dev->dev_private;
2770 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2771 int pipe = intel_crtc->pipe;
2774 /* disable CPU FDI tx and PCH FDI rx */
2775 reg = FDI_TX_CTL(pipe);
2776 temp = I915_READ(reg);
2777 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2780 reg = FDI_RX_CTL(pipe);
2781 temp = I915_READ(reg);
2782 temp &= ~(0x7 << 16);
2783 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2784 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2789 /* Ironlake workaround, disable clock pointer after downing FDI */
2790 if (HAS_PCH_IBX(dev)) {
2791 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2792 I915_WRITE(FDI_RX_CHICKEN(pipe),
2793 I915_READ(FDI_RX_CHICKEN(pipe) &
2794 ~FDI_RX_PHASE_SYNC_POINTER_EN));
2795 } else if (HAS_PCH_CPT(dev)) {
2796 cpt_phase_pointer_disable(dev, pipe);
2799 /* still set train pattern 1 */
2800 reg = FDI_TX_CTL(pipe);
2801 temp = I915_READ(reg);
2802 temp &= ~FDI_LINK_TRAIN_NONE;
2803 temp |= FDI_LINK_TRAIN_PATTERN_1;
2804 I915_WRITE(reg, temp);
2806 reg = FDI_RX_CTL(pipe);
2807 temp = I915_READ(reg);
2808 if (HAS_PCH_CPT(dev)) {
2809 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2810 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2812 temp &= ~FDI_LINK_TRAIN_NONE;
2813 temp |= FDI_LINK_TRAIN_PATTERN_1;
2815 /* BPC in FDI rx is consistent with that in PIPECONF */
2816 temp &= ~(0x07 << 16);
2817 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2818 I915_WRITE(reg, temp);
2824 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2826 struct drm_device *dev = crtc->dev;
2828 if (crtc->fb == NULL)
2831 mutex_lock(&dev->struct_mutex);
2832 intel_finish_fb(crtc->fb);
2833 mutex_unlock(&dev->struct_mutex);
2836 static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
2838 struct drm_device *dev = crtc->dev;
2839 struct intel_encoder *encoder;
2842 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
2843 * must be driven by its own crtc; no sharing is possible.
2845 for_each_encoder_on_crtc(dev, crtc, encoder) {
2847 /* On Haswell, LPT PCH handles the VGA connection via FDI, and Haswell
2848 * CPU handles all others */
2849 if (IS_HASWELL(dev)) {
2850 /* It is still unclear how this will work on PPT, so throw up a warning */
2851 WARN_ON(!HAS_PCH_LPT(dev));
2853 if (encoder->type == DRM_MODE_ENCODER_DAC) {
2854 DRM_DEBUG_KMS("Haswell detected DAC encoder, assuming is PCH\n");
2857 DRM_DEBUG_KMS("Haswell detected encoder %d, assuming is CPU\n",
2863 switch (encoder->type) {
2864 case INTEL_OUTPUT_EDP:
2865 if (!intel_encoder_is_pch_edp(&encoder->base))
2874 /* Program iCLKIP clock to the desired frequency */
2875 static void lpt_program_iclkip(struct drm_crtc *crtc)
2877 struct drm_device *dev = crtc->dev;
2878 struct drm_i915_private *dev_priv = dev->dev_private;
2879 u32 divsel, phaseinc, auxdiv, phasedir = 0;
2882 /* It is necessary to ungate the pixclk gate prior to programming
2883 * the divisors, and gate it back when it is done.
2885 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
2887 /* Disable SSCCTL */
2888 intel_sbi_write(dev_priv, SBI_SSCCTL6,
2889 intel_sbi_read(dev_priv, SBI_SSCCTL6) |
2890 SBI_SSCCTL_DISABLE);
2892 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
2893 if (crtc->mode.clock == 20000) {
2898 /* The iCLK virtual clock root frequency is in MHz,
2899 * but the crtc->mode.clock in in KHz. To get the divisors,
2900 * it is necessary to divide one by another, so we
2901 * convert the virtual clock precision to KHz here for higher
2904 u32 iclk_virtual_root_freq = 172800 * 1000;
2905 u32 iclk_pi_range = 64;
2906 u32 desired_divisor, msb_divisor_value, pi_value;
2908 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock);
2909 msb_divisor_value = desired_divisor / iclk_pi_range;
2910 pi_value = desired_divisor % iclk_pi_range;
2913 divsel = msb_divisor_value - 2;
2914 phaseinc = pi_value;
2917 /* This should not happen with any sane values */
2918 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
2919 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
2920 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
2921 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
2923 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
2930 /* Program SSCDIVINTPHASE6 */
2931 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6);
2932 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
2933 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
2934 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
2935 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
2936 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
2937 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
2939 intel_sbi_write(dev_priv,
2940 SBI_SSCDIVINTPHASE6,
2943 /* Program SSCAUXDIV */
2944 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6);
2945 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
2946 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
2947 intel_sbi_write(dev_priv,
2952 /* Enable modulator and associated divider */
2953 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6);
2954 temp &= ~SBI_SSCCTL_DISABLE;
2955 intel_sbi_write(dev_priv,
2959 /* Wait for initialization time */
2962 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
2966 * Enable PCH resources required for PCH ports:
2968 * - FDI training & RX/TX
2969 * - update transcoder timings
2970 * - DP transcoding bits
2973 static void ironlake_pch_enable(struct drm_crtc *crtc)
2975 struct drm_device *dev = crtc->dev;
2976 struct drm_i915_private *dev_priv = dev->dev_private;
2977 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2978 int pipe = intel_crtc->pipe;
2981 assert_transcoder_disabled(dev_priv, pipe);
2983 /* For PCH output, training FDI link */
2984 dev_priv->display.fdi_link_train(crtc);
2986 intel_enable_pch_pll(intel_crtc);
2988 if (HAS_PCH_LPT(dev)) {
2989 DRM_DEBUG_KMS("LPT detected: programming iCLKIP\n");
2990 lpt_program_iclkip(crtc);
2991 } else if (HAS_PCH_CPT(dev)) {
2994 temp = I915_READ(PCH_DPLL_SEL);
2998 temp |= TRANSA_DPLL_ENABLE;
2999 sel = TRANSA_DPLLB_SEL;
3002 temp |= TRANSB_DPLL_ENABLE;
3003 sel = TRANSB_DPLLB_SEL;
3006 temp |= TRANSC_DPLL_ENABLE;
3007 sel = TRANSC_DPLLB_SEL;
3010 if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B)
3014 I915_WRITE(PCH_DPLL_SEL, temp);
3017 /* set transcoder timing, panel must allow it */
3018 assert_panel_unlocked(dev_priv, pipe);
3019 I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
3020 I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
3021 I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
3023 I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
3024 I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
3025 I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
3026 I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
3028 if (!IS_HASWELL(dev))
3029 intel_fdi_normal_train(crtc);
3031 /* For PCH DP, enable TRANS_DP_CTL */
3032 if (HAS_PCH_CPT(dev) &&
3033 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3034 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3035 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
3036 reg = TRANS_DP_CTL(pipe);
3037 temp = I915_READ(reg);
3038 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3039 TRANS_DP_SYNC_MASK |
3041 temp |= (TRANS_DP_OUTPUT_ENABLE |
3042 TRANS_DP_ENH_FRAMING);
3043 temp |= bpc << 9; /* same format but at 11:9 */
3045 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3046 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3047 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3048 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3050 switch (intel_trans_dp_port_sel(crtc)) {
3052 temp |= TRANS_DP_PORT_SEL_B;
3055 temp |= TRANS_DP_PORT_SEL_C;
3058 temp |= TRANS_DP_PORT_SEL_D;
3061 DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
3062 temp |= TRANS_DP_PORT_SEL_B;
3066 I915_WRITE(reg, temp);
3069 intel_enable_transcoder(dev_priv, pipe);
3072 static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
3074 struct intel_pch_pll *pll = intel_crtc->pch_pll;
3079 if (pll->refcount == 0) {
3080 WARN(1, "bad PCH PLL refcount\n");
3085 intel_crtc->pch_pll = NULL;
3088 static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp)
3090 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
3091 struct intel_pch_pll *pll;
3094 pll = intel_crtc->pch_pll;
3096 DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n",
3097 intel_crtc->base.base.id, pll->pll_reg);
3101 if (HAS_PCH_IBX(dev_priv->dev)) {
3102 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3103 i = intel_crtc->pipe;
3104 pll = &dev_priv->pch_plls[i];
3106 DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n",
3107 intel_crtc->base.base.id, pll->pll_reg);
3112 for (i = 0; i < dev_priv->num_pch_pll; i++) {
3113 pll = &dev_priv->pch_plls[i];
3115 /* Only want to check enabled timings first */
3116 if (pll->refcount == 0)
3119 if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) &&
3120 fp == I915_READ(pll->fp0_reg)) {
3121 DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n",
3122 intel_crtc->base.base.id,
3123 pll->pll_reg, pll->refcount, pll->active);
3129 /* Ok no matching timings, maybe there's a free one? */
3130 for (i = 0; i < dev_priv->num_pch_pll; i++) {
3131 pll = &dev_priv->pch_plls[i];
3132 if (pll->refcount == 0) {
3133 DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n",
3134 intel_crtc->base.base.id, pll->pll_reg);
3142 intel_crtc->pch_pll = pll;
3144 DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
3145 prepare: /* separate function? */
3146 DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
3148 /* Wait for the clocks to stabilize before rewriting the regs */
3149 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3150 POSTING_READ(pll->pll_reg);
3153 I915_WRITE(pll->fp0_reg, fp);
3154 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3159 void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
3161 struct drm_i915_private *dev_priv = dev->dev_private;
3162 int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
3165 temp = I915_READ(dslreg);
3167 if (wait_for(I915_READ(dslreg) != temp, 5)) {
3168 /* Without this, mode sets may fail silently on FDI */
3169 I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
3171 I915_WRITE(tc2reg, 0);
3172 if (wait_for(I915_READ(dslreg) != temp, 5))
3173 DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
3177 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3179 struct drm_device *dev = crtc->dev;
3180 struct drm_i915_private *dev_priv = dev->dev_private;
3181 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3182 int pipe = intel_crtc->pipe;
3183 int plane = intel_crtc->plane;
3187 if (intel_crtc->active)
3190 intel_crtc->active = true;
3191 intel_update_watermarks(dev);
3193 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3194 temp = I915_READ(PCH_LVDS);
3195 if ((temp & LVDS_PORT_EN) == 0)
3196 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3199 is_pch_port = intel_crtc_driving_pch(crtc);
3202 ironlake_fdi_pll_enable(crtc);
3204 ironlake_fdi_disable(crtc);
3206 /* Enable panel fitting for LVDS */
3207 if (dev_priv->pch_pf_size &&
3208 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
3209 /* Force use of hard-coded filter coefficients
3210 * as some pre-programmed values are broken,
3213 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3214 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3215 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3219 * On ILK+ LUT must be loaded before the pipe is running but with
3222 intel_crtc_load_lut(crtc);
3224 intel_enable_pipe(dev_priv, pipe, is_pch_port);
3225 intel_enable_plane(dev_priv, plane, pipe);
3228 ironlake_pch_enable(crtc);
3230 mutex_lock(&dev->struct_mutex);
3231 intel_update_fbc(dev);
3232 mutex_unlock(&dev->struct_mutex);
3234 intel_crtc_update_cursor(crtc, true);
3237 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3239 struct drm_device *dev = crtc->dev;
3240 struct drm_i915_private *dev_priv = dev->dev_private;
3241 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3242 int pipe = intel_crtc->pipe;
3243 int plane = intel_crtc->plane;
3246 if (!intel_crtc->active)
3249 intel_crtc_wait_for_pending_flips(crtc);
3250 drm_vblank_off(dev, pipe);
3251 intel_crtc_update_cursor(crtc, false);
3253 intel_disable_plane(dev_priv, plane, pipe);
3255 if (dev_priv->cfb_plane == plane)
3256 intel_disable_fbc(dev);
3258 intel_disable_pipe(dev_priv, pipe);
3261 I915_WRITE(PF_CTL(pipe), 0);
3262 I915_WRITE(PF_WIN_SZ(pipe), 0);
3264 ironlake_fdi_disable(crtc);
3266 /* This is a horrible layering violation; we should be doing this in
3267 * the connector/encoder ->prepare instead, but we don't always have
3268 * enough information there about the config to know whether it will
3269 * actually be necessary or just cause undesired flicker.
3271 intel_disable_pch_ports(dev_priv, pipe);
3273 intel_disable_transcoder(dev_priv, pipe);
3275 if (HAS_PCH_CPT(dev)) {
3276 /* disable TRANS_DP_CTL */
3277 reg = TRANS_DP_CTL(pipe);
3278 temp = I915_READ(reg);
3279 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
3280 temp |= TRANS_DP_PORT_SEL_NONE;
3281 I915_WRITE(reg, temp);
3283 /* disable DPLL_SEL */
3284 temp = I915_READ(PCH_DPLL_SEL);
3287 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
3290 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3293 /* C shares PLL A or B */
3294 temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
3299 I915_WRITE(PCH_DPLL_SEL, temp);
3302 /* disable PCH DPLL */
3303 intel_disable_pch_pll(intel_crtc);
3305 /* Switch from PCDclk to Rawclk */
3306 reg = FDI_RX_CTL(pipe);
3307 temp = I915_READ(reg);
3308 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3310 /* Disable CPU FDI TX PLL */
3311 reg = FDI_TX_CTL(pipe);
3312 temp = I915_READ(reg);
3313 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3318 reg = FDI_RX_CTL(pipe);
3319 temp = I915_READ(reg);
3320 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3322 /* Wait for the clocks to turn off. */
3326 intel_crtc->active = false;
3327 intel_update_watermarks(dev);
3329 mutex_lock(&dev->struct_mutex);
3330 intel_update_fbc(dev);
3331 mutex_unlock(&dev->struct_mutex);
3334 static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
3336 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3337 int pipe = intel_crtc->pipe;
3338 int plane = intel_crtc->plane;
3340 /* XXX: When our outputs are all unaware of DPMS modes other than off
3341 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
3344 case DRM_MODE_DPMS_ON:
3345 case DRM_MODE_DPMS_STANDBY:
3346 case DRM_MODE_DPMS_SUSPEND:
3347 DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
3348 ironlake_crtc_enable(crtc);
3351 case DRM_MODE_DPMS_OFF:
3352 DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
3353 ironlake_crtc_disable(crtc);
3358 static void ironlake_crtc_off(struct drm_crtc *crtc)
3360 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3361 intel_put_pch_pll(intel_crtc);
3364 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3366 if (!enable && intel_crtc->overlay) {
3367 struct drm_device *dev = intel_crtc->base.dev;
3368 struct drm_i915_private *dev_priv = dev->dev_private;
3370 mutex_lock(&dev->struct_mutex);
3371 dev_priv->mm.interruptible = false;
3372 (void) intel_overlay_switch_off(intel_crtc->overlay);
3373 dev_priv->mm.interruptible = true;
3374 mutex_unlock(&dev->struct_mutex);
3377 /* Let userspace switch the overlay on again. In most cases userspace
3378 * has to recompute where to put it anyway.
3382 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3384 struct drm_device *dev = crtc->dev;
3385 struct drm_i915_private *dev_priv = dev->dev_private;
3386 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3387 int pipe = intel_crtc->pipe;
3388 int plane = intel_crtc->plane;
3390 if (intel_crtc->active)
3393 intel_crtc->active = true;
3394 intel_update_watermarks(dev);
3396 intel_enable_pll(dev_priv, pipe);
3397 intel_enable_pipe(dev_priv, pipe, false);
3398 intel_enable_plane(dev_priv, plane, pipe);
3400 intel_crtc_load_lut(crtc);
3401 intel_update_fbc(dev);
3403 /* Give the overlay scaler a chance to enable if it's on this pipe */
3404 intel_crtc_dpms_overlay(intel_crtc, true);
3405 intel_crtc_update_cursor(crtc, true);
3408 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3410 struct drm_device *dev = crtc->dev;
3411 struct drm_i915_private *dev_priv = dev->dev_private;
3412 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3413 int pipe = intel_crtc->pipe;
3414 int plane = intel_crtc->plane;
3416 if (!intel_crtc->active)
3419 /* Give the overlay scaler a chance to disable if it's on this pipe */
3420 intel_crtc_wait_for_pending_flips(crtc);
3421 drm_vblank_off(dev, pipe);
3422 intel_crtc_dpms_overlay(intel_crtc, false);
3423 intel_crtc_update_cursor(crtc, false);
3425 if (dev_priv->cfb_plane == plane)
3426 intel_disable_fbc(dev);
3428 intel_disable_plane(dev_priv, plane, pipe);
3429 intel_disable_pipe(dev_priv, pipe);
3430 intel_disable_pll(dev_priv, pipe);
3432 intel_crtc->active = false;
3433 intel_update_fbc(dev);
3434 intel_update_watermarks(dev);
3437 static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
3439 /* XXX: When our outputs are all unaware of DPMS modes other than off
3440 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
3443 case DRM_MODE_DPMS_ON:
3444 case DRM_MODE_DPMS_STANDBY:
3445 case DRM_MODE_DPMS_SUSPEND:
3446 i9xx_crtc_enable(crtc);
3448 case DRM_MODE_DPMS_OFF:
3449 i9xx_crtc_disable(crtc);
3454 static void i9xx_crtc_off(struct drm_crtc *crtc)
3459 * Sets the power management mode of the pipe and plane.
3461 static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
3463 struct drm_device *dev = crtc->dev;
3464 struct drm_i915_private *dev_priv = dev->dev_private;
3465 struct drm_i915_master_private *master_priv;
3466 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3467 int pipe = intel_crtc->pipe;
3470 if (intel_crtc->dpms_mode == mode)
3473 intel_crtc->dpms_mode = mode;
3475 dev_priv->display.dpms(crtc, mode);
3477 if (!dev->primary->master)
3480 master_priv = dev->primary->master->driver_priv;
3481 if (!master_priv->sarea_priv)
3484 enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
3488 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3489 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3492 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3493 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3496 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3501 static void intel_crtc_disable(struct drm_crtc *crtc)
3503 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
3504 struct drm_device *dev = crtc->dev;
3505 struct drm_i915_private *dev_priv = dev->dev_private;
3507 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
3508 dev_priv->display.off(crtc);
3510 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3511 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3514 mutex_lock(&dev->struct_mutex);
3515 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3516 mutex_unlock(&dev->struct_mutex);
3520 /* Prepare for a mode set.
3522 * Note we could be a lot smarter here. We need to figure out which outputs
3523 * will be enabled, which disabled (in short, how the config will changes)
3524 * and perform the minimum necessary steps to accomplish that, e.g. updating
3525 * watermarks, FBC configuration, making sure PLLs are programmed correctly,
3526 * panel fitting is in the proper state, etc.
3528 static void i9xx_crtc_prepare(struct drm_crtc *crtc)
3530 i9xx_crtc_disable(crtc);
3533 static void i9xx_crtc_commit(struct drm_crtc *crtc)
3535 i9xx_crtc_enable(crtc);
3538 static void ironlake_crtc_prepare(struct drm_crtc *crtc)
3540 ironlake_crtc_disable(crtc);
3543 static void ironlake_crtc_commit(struct drm_crtc *crtc)
3545 ironlake_crtc_enable(crtc);
3548 void intel_encoder_prepare(struct drm_encoder *encoder)
3550 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3551 /* lvds has its own version of prepare see intel_lvds_prepare */
3552 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
3555 void intel_encoder_commit(struct drm_encoder *encoder)
3557 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3558 struct drm_device *dev = encoder->dev;
3559 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
3561 /* lvds has its own version of commit see intel_lvds_commit */
3562 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
3564 if (HAS_PCH_CPT(dev))
3565 intel_cpt_verify_modeset(dev, intel_crtc->pipe);
3568 void intel_encoder_destroy(struct drm_encoder *encoder)
3570 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3572 drm_encoder_cleanup(encoder);
3573 kfree(intel_encoder);
3576 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
3577 const struct drm_display_mode *mode,
3578 struct drm_display_mode *adjusted_mode)
3580 struct drm_device *dev = crtc->dev;
3582 if (HAS_PCH_SPLIT(dev)) {
3583 /* FDI link clock is fixed at 2.7G */
3584 if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
3588 /* All interlaced capable intel hw wants timings in frames. Note though
3589 * that intel_lvds_mode_fixup does some funny tricks with the crtc
3590 * timings, so we need to be careful not to clobber these.*/
3591 if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
3592 drm_mode_set_crtcinfo(adjusted_mode, 0);
3597 static int valleyview_get_display_clock_speed(struct drm_device *dev)
3599 return 400000; /* FIXME */
3602 static int i945_get_display_clock_speed(struct drm_device *dev)
3607 static int i915_get_display_clock_speed(struct drm_device *dev)
3612 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
3617 static int i915gm_get_display_clock_speed(struct drm_device *dev)
3621 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3623 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
3626 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
3627 case GC_DISPLAY_CLOCK_333_MHZ:
3630 case GC_DISPLAY_CLOCK_190_200_MHZ:
3636 static int i865_get_display_clock_speed(struct drm_device *dev)
3641 static int i855_get_display_clock_speed(struct drm_device *dev)
3644 /* Assume that the hardware is in the high speed state. This
3645 * should be the default.
3647 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
3648 case GC_CLOCK_133_200:
3649 case GC_CLOCK_100_200:
3651 case GC_CLOCK_166_250:
3653 case GC_CLOCK_100_133:
3657 /* Shouldn't happen */
3661 static int i830_get_display_clock_speed(struct drm_device *dev)
3675 fdi_reduce_ratio(u32 *num, u32 *den)
3677 while (*num > 0xffffff || *den > 0xffffff) {
3684 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
3685 int link_clock, struct fdi_m_n *m_n)
3687 m_n->tu = 64; /* default size */
3689 /* BUG_ON(pixel_clock > INT_MAX / 36); */
3690 m_n->gmch_m = bits_per_pixel * pixel_clock;
3691 m_n->gmch_n = link_clock * nlanes * 8;
3692 fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
3694 m_n->link_m = pixel_clock;
3695 m_n->link_n = link_clock;
3696 fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
3699 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
3701 if (i915_panel_use_ssc >= 0)
3702 return i915_panel_use_ssc != 0;
3703 return dev_priv->lvds_use_ssc
3704 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
3708 * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
3709 * @crtc: CRTC structure
3710 * @mode: requested mode
3712 * A pipe may be connected to one or more outputs. Based on the depth of the
3713 * attached framebuffer, choose a good color depth to use on the pipe.
3715 * If possible, match the pipe depth to the fb depth. In some cases, this
3716 * isn't ideal, because the connected output supports a lesser or restricted
3717 * set of depths. Resolve that here:
3718 * LVDS typically supports only 6bpc, so clamp down in that case
3719 * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
3720 * Displays may support a restricted set as well, check EDID and clamp as
3722 * DP may want to dither down to 6bpc to fit larger modes
3725 * Dithering requirement (i.e. false if display bpc and pipe bpc match,
3726 * true if they don't match).
3728 static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
3729 unsigned int *pipe_bpp,
3730 struct drm_display_mode *mode)
3732 struct drm_device *dev = crtc->dev;
3733 struct drm_i915_private *dev_priv = dev->dev_private;
3734 struct drm_connector *connector;
3735 struct intel_encoder *intel_encoder;
3736 unsigned int display_bpc = UINT_MAX, bpc;
3738 /* Walk the encoders & connectors on this crtc, get min bpc */
3739 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
3741 if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
3742 unsigned int lvds_bpc;
3744 if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
3750 if (lvds_bpc < display_bpc) {
3751 DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
3752 display_bpc = lvds_bpc;
3757 /* Not one of the known troublemakers, check the EDID */
3758 list_for_each_entry(connector, &dev->mode_config.connector_list,
3760 if (connector->encoder != &intel_encoder->base)
3763 /* Don't use an invalid EDID bpc value */
3764 if (connector->display_info.bpc &&
3765 connector->display_info.bpc < display_bpc) {
3766 DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
3767 display_bpc = connector->display_info.bpc;
3772 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
3773 * through, clamp it down. (Note: >12bpc will be caught below.)
3775 if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
3776 if (display_bpc > 8 && display_bpc < 12) {
3777 DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
3780 DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
3786 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
3787 DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
3792 * We could just drive the pipe at the highest bpc all the time and
3793 * enable dithering as needed, but that costs bandwidth. So choose
3794 * the minimum value that expresses the full color range of the fb but
3795 * also stays within the max display bpc discovered above.
3798 switch (crtc->fb->depth) {
3800 bpc = 8; /* since we go through a colormap */
3804 bpc = 6; /* min is 18bpp */
3816 DRM_DEBUG("unsupported depth, assuming 24 bits\n");
3817 bpc = min((unsigned int)8, display_bpc);
3821 display_bpc = min(display_bpc, bpc);
3823 DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
3826 *pipe_bpp = display_bpc * 3;
3828 return display_bpc != bpc;
3831 static int vlv_get_refclk(struct drm_crtc *crtc)
3833 struct drm_device *dev = crtc->dev;
3834 struct drm_i915_private *dev_priv = dev->dev_private;
3835 int refclk = 27000; /* for DP & HDMI */
3837 return 100000; /* only one validated so far */
3839 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
3841 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3842 if (intel_panel_use_ssc(dev_priv))
3846 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
3853 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
3855 struct drm_device *dev = crtc->dev;
3856 struct drm_i915_private *dev_priv = dev->dev_private;
3859 if (IS_VALLEYVIEW(dev)) {
3860 refclk = vlv_get_refclk(crtc);
3861 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
3862 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
3863 refclk = dev_priv->lvds_ssc_freq * 1000;
3864 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
3866 } else if (!IS_GEN2(dev)) {
3875 static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
3876 intel_clock_t *clock)
3878 /* SDVO TV has fixed PLL values depend on its clock range,
3879 this mirrors vbios setting. */
3880 if (adjusted_mode->clock >= 100000
3881 && adjusted_mode->clock < 140500) {
3887 } else if (adjusted_mode->clock >= 140500
3888 && adjusted_mode->clock <= 200000) {
3897 static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
3898 intel_clock_t *clock,
3899 intel_clock_t *reduced_clock)
3901 struct drm_device *dev = crtc->dev;
3902 struct drm_i915_private *dev_priv = dev->dev_private;
3903 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3904 int pipe = intel_crtc->pipe;
3907 if (IS_PINEVIEW(dev)) {
3908 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
3910 fp2 = (1 << reduced_clock->n) << 16 |
3911 reduced_clock->m1 << 8 | reduced_clock->m2;
3913 fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
3915 fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
3919 I915_WRITE(FP0(pipe), fp);
3921 intel_crtc->lowfreq_avail = false;
3922 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
3923 reduced_clock && i915_powersave) {
3924 I915_WRITE(FP1(pipe), fp2);
3925 intel_crtc->lowfreq_avail = true;
3927 I915_WRITE(FP1(pipe), fp);
3931 static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
3932 struct drm_display_mode *adjusted_mode)
3934 struct drm_device *dev = crtc->dev;
3935 struct drm_i915_private *dev_priv = dev->dev_private;
3936 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3937 int pipe = intel_crtc->pipe;
3940 temp = I915_READ(LVDS);
3941 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
3943 temp |= LVDS_PIPEB_SELECT;
3945 temp &= ~LVDS_PIPEB_SELECT;
3947 /* set the corresponsding LVDS_BORDER bit */
3948 temp |= dev_priv->lvds_border_bits;
3949 /* Set the B0-B3 data pairs corresponding to whether we're going to
3950 * set the DPLLs for dual-channel mode or not.
3953 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
3955 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
3957 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
3958 * appropriately here, but we need to look more thoroughly into how
3959 * panels behave in the two modes.
3961 /* set the dithering flag on LVDS as needed */
3962 if (INTEL_INFO(dev)->gen >= 4) {
3963 if (dev_priv->lvds_dither)
3964 temp |= LVDS_ENABLE_DITHER;
3966 temp &= ~LVDS_ENABLE_DITHER;
3968 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
3969 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
3970 temp |= LVDS_HSYNC_POLARITY;
3971 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
3972 temp |= LVDS_VSYNC_POLARITY;
3973 I915_WRITE(LVDS, temp);
3976 static void vlv_update_pll(struct drm_crtc *crtc,
3977 struct drm_display_mode *mode,
3978 struct drm_display_mode *adjusted_mode,
3979 intel_clock_t *clock, intel_clock_t *reduced_clock,
3980 int refclk, int num_connectors)
3982 struct drm_device *dev = crtc->dev;
3983 struct drm_i915_private *dev_priv = dev->dev_private;
3984 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3985 int pipe = intel_crtc->pipe;
3986 u32 dpll, mdiv, pdiv;
3987 u32 bestn, bestm1, bestm2, bestp1, bestp2;
3990 is_hdmi = intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
3998 /* Enable DPIO clock input */
3999 dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
4000 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
4001 I915_WRITE(DPLL(pipe), dpll);
4002 POSTING_READ(DPLL(pipe));
4004 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4005 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4006 mdiv |= ((bestn << DPIO_N_SHIFT));
4007 mdiv |= (1 << DPIO_POST_DIV_SHIFT);
4008 mdiv |= (1 << DPIO_K_SHIFT);
4009 mdiv |= DPIO_ENABLE_CALIBRATION;
4010 intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
4012 intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
4014 pdiv = DPIO_REFSEL_OVERRIDE | (5 << DPIO_PLL_MODESEL_SHIFT) |
4015 (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
4016 (8 << DPIO_DRIVER_CTL_SHIFT) | (5 << DPIO_CLK_BIAS_CTL_SHIFT);
4017 intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
4019 intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x009f0051);
4021 dpll |= DPLL_VCO_ENABLE;
4022 I915_WRITE(DPLL(pipe), dpll);
4023 POSTING_READ(DPLL(pipe));
4024 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
4025 DRM_ERROR("DPLL %d failed to lock\n", pipe);
4028 u32 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
4031 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4035 I915_WRITE(DPLL_MD(pipe), temp);
4036 POSTING_READ(DPLL_MD(pipe));
4039 intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x641); /* ??? */
4042 static void i9xx_update_pll(struct drm_crtc *crtc,
4043 struct drm_display_mode *mode,
4044 struct drm_display_mode *adjusted_mode,
4045 intel_clock_t *clock, intel_clock_t *reduced_clock,
4048 struct drm_device *dev = crtc->dev;
4049 struct drm_i915_private *dev_priv = dev->dev_private;
4050 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4051 int pipe = intel_crtc->pipe;
4055 is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
4056 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
4058 dpll = DPLL_VGA_MODE_DIS;
4060 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
4061 dpll |= DPLLB_MODE_LVDS;
4063 dpll |= DPLLB_MODE_DAC_SERIAL;
4065 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
4066 if (pixel_multiplier > 1) {
4067 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
4068 dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
4070 dpll |= DPLL_DVO_HIGH_SPEED;
4072 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
4073 dpll |= DPLL_DVO_HIGH_SPEED;
4075 /* compute bitmask from p1 value */
4076 if (IS_PINEVIEW(dev))
4077 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
4079 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4080 if (IS_G4X(dev) && reduced_clock)
4081 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4083 switch (clock->p2) {
4085 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4088 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4091 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4094 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4097 if (INTEL_INFO(dev)->gen >= 4)
4098 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
4100 if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
4101 dpll |= PLL_REF_INPUT_TVCLKINBC;
4102 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
4103 /* XXX: just matching BIOS for now */
4104 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4106 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4107 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4108 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4110 dpll |= PLL_REF_INPUT_DREFCLK;
4112 dpll |= DPLL_VCO_ENABLE;
4113 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4114 POSTING_READ(DPLL(pipe));
4117 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
4118 * This is an exception to the general rule that mode_set doesn't turn
4121 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
4122 intel_update_lvds(crtc, clock, adjusted_mode);
4124 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
4125 intel_dp_set_m_n(crtc, mode, adjusted_mode);
4127 I915_WRITE(DPLL(pipe), dpll);
4129 /* Wait for the clocks to stabilize. */
4130 POSTING_READ(DPLL(pipe));
4133 if (INTEL_INFO(dev)->gen >= 4) {
4136 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
4138 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4142 I915_WRITE(DPLL_MD(pipe), temp);
4144 /* The pixel multiplier can only be updated once the
4145 * DPLL is enabled and the clocks are stable.
4147 * So write it again.
4149 I915_WRITE(DPLL(pipe), dpll);
4153 static void i8xx_update_pll(struct drm_crtc *crtc,
4154 struct drm_display_mode *adjusted_mode,
4155 intel_clock_t *clock,
4158 struct drm_device *dev = crtc->dev;
4159 struct drm_i915_private *dev_priv = dev->dev_private;
4160 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4161 int pipe = intel_crtc->pipe;
4164 dpll = DPLL_VGA_MODE_DIS;
4166 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
4167 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4170 dpll |= PLL_P1_DIVIDE_BY_TWO;
4172 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4174 dpll |= PLL_P2_DIVIDE_BY_4;
4177 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
4178 /* XXX: just matching BIOS for now */
4179 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4181 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4182 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4183 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4185 dpll |= PLL_REF_INPUT_DREFCLK;
4187 dpll |= DPLL_VCO_ENABLE;
4188 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4189 POSTING_READ(DPLL(pipe));
4192 I915_WRITE(DPLL(pipe), dpll);
4194 /* Wait for the clocks to stabilize. */
4195 POSTING_READ(DPLL(pipe));
4198 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
4199 * This is an exception to the general rule that mode_set doesn't turn
4202 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
4203 intel_update_lvds(crtc, clock, adjusted_mode);
4205 /* The pixel multiplier can only be updated once the
4206 * DPLL is enabled and the clocks are stable.
4208 * So write it again.
4210 I915_WRITE(DPLL(pipe), dpll);
4213 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
4214 struct drm_display_mode *mode,
4215 struct drm_display_mode *adjusted_mode,
4217 struct drm_framebuffer *old_fb)
4219 struct drm_device *dev = crtc->dev;
4220 struct drm_i915_private *dev_priv = dev->dev_private;
4221 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4222 int pipe = intel_crtc->pipe;
4223 int plane = intel_crtc->plane;
4224 int refclk, num_connectors = 0;
4225 intel_clock_t clock, reduced_clock;
4226 u32 dspcntr, pipeconf, vsyncshift;
4227 bool ok, has_reduced_clock = false, is_sdvo = false;
4228 bool is_lvds = false, is_tv = false, is_dp = false;
4229 struct intel_encoder *encoder;
4230 const intel_limit_t *limit;
4233 for_each_encoder_on_crtc(dev, crtc, encoder) {
4234 switch (encoder->type) {
4235 case INTEL_OUTPUT_LVDS:
4238 case INTEL_OUTPUT_SDVO:
4239 case INTEL_OUTPUT_HDMI:
4241 if (encoder->needs_tv_clock)
4244 case INTEL_OUTPUT_TVOUT:
4247 case INTEL_OUTPUT_DISPLAYPORT:
4255 refclk = i9xx_get_refclk(crtc, num_connectors);
4258 * Returns a set of divisors for the desired target clock with the given
4259 * refclk, or FALSE. The returned values represent the clock equation:
4260 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4262 limit = intel_limit(crtc, refclk);
4263 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4266 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4270 /* Ensure that the cursor is valid for the new mode before changing... */
4271 intel_crtc_update_cursor(crtc, true);
4273 if (is_lvds && dev_priv->lvds_downclock_avail) {
4275 * Ensure we match the reduced clock's P to the target clock.
4276 * If the clocks don't match, we can't switch the display clock
4277 * by using the FP0/FP1. In such case we will disable the LVDS
4278 * downclock feature.
4280 has_reduced_clock = limit->find_pll(limit, crtc,
4281 dev_priv->lvds_downclock,
4287 if (is_sdvo && is_tv)
4288 i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
4290 i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
4291 &reduced_clock : NULL);
4294 i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
4295 else if (IS_VALLEYVIEW(dev))
4296 vlv_update_pll(crtc, mode,adjusted_mode, &clock, NULL,
4297 refclk, num_connectors);
4299 i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
4300 has_reduced_clock ? &reduced_clock : NULL,
4303 /* setup pipeconf */
4304 pipeconf = I915_READ(PIPECONF(pipe));
4306 /* Set up the display plane register */
4307 dspcntr = DISPPLANE_GAMMA_ENABLE;
4310 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
4312 dspcntr |= DISPPLANE_SEL_PIPE_B;
4314 if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
4315 /* Enable pixel doubling when the dot clock is > 90% of the (display)
4318 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
4322 dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
4323 pipeconf |= PIPECONF_DOUBLE_WIDE;
4325 pipeconf &= ~PIPECONF_DOUBLE_WIDE;
4328 /* default to 8bpc */
4329 pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
4331 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
4332 pipeconf |= PIPECONF_BPP_6 |
4333 PIPECONF_DITHER_EN |
4334 PIPECONF_DITHER_TYPE_SP;
4338 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
4339 drm_mode_debug_printmodeline(mode);
4341 if (HAS_PIPE_CXSR(dev)) {
4342 if (intel_crtc->lowfreq_avail) {
4343 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4344 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4346 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4347 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4351 pipeconf &= ~PIPECONF_INTERLACE_MASK;
4352 if (!IS_GEN2(dev) &&
4353 adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4354 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4355 /* the chip adds 2 halflines automatically */
4356 adjusted_mode->crtc_vtotal -= 1;
4357 adjusted_mode->crtc_vblank_end -= 1;
4358 vsyncshift = adjusted_mode->crtc_hsync_start
4359 - adjusted_mode->crtc_htotal/2;
4361 pipeconf |= PIPECONF_PROGRESSIVE;
4366 I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
4368 I915_WRITE(HTOTAL(pipe),
4369 (adjusted_mode->crtc_hdisplay - 1) |
4370 ((adjusted_mode->crtc_htotal - 1) << 16));
4371 I915_WRITE(HBLANK(pipe),
4372 (adjusted_mode->crtc_hblank_start - 1) |
4373 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4374 I915_WRITE(HSYNC(pipe),
4375 (adjusted_mode->crtc_hsync_start - 1) |
4376 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4378 I915_WRITE(VTOTAL(pipe),
4379 (adjusted_mode->crtc_vdisplay - 1) |
4380 ((adjusted_mode->crtc_vtotal - 1) << 16));
4381 I915_WRITE(VBLANK(pipe),
4382 (adjusted_mode->crtc_vblank_start - 1) |
4383 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4384 I915_WRITE(VSYNC(pipe),
4385 (adjusted_mode->crtc_vsync_start - 1) |
4386 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4388 /* pipesrc and dspsize control the size that is scaled from,
4389 * which should always be the user's requested size.
4391 I915_WRITE(DSPSIZE(plane),
4392 ((mode->vdisplay - 1) << 16) |
4393 (mode->hdisplay - 1));
4394 I915_WRITE(DSPPOS(plane), 0);
4395 I915_WRITE(PIPESRC(pipe),
4396 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4398 I915_WRITE(PIPECONF(pipe), pipeconf);
4399 POSTING_READ(PIPECONF(pipe));
4400 intel_enable_pipe(dev_priv, pipe, false);
4402 intel_wait_for_vblank(dev, pipe);
4404 I915_WRITE(DSPCNTR(plane), dspcntr);
4405 POSTING_READ(DSPCNTR(plane));
4407 ret = intel_pipe_set_base(crtc, x, y, old_fb);
4409 intel_update_watermarks(dev);
4415 * Initialize reference clocks when the driver loads
4417 void ironlake_init_pch_refclk(struct drm_device *dev)
4419 struct drm_i915_private *dev_priv = dev->dev_private;
4420 struct drm_mode_config *mode_config = &dev->mode_config;
4421 struct intel_encoder *encoder;
4423 bool has_lvds = false;
4424 bool has_cpu_edp = false;
4425 bool has_pch_edp = false;
4426 bool has_panel = false;
4427 bool has_ck505 = false;
4428 bool can_ssc = false;
4430 /* We need to take the global config into account */
4431 list_for_each_entry(encoder, &mode_config->encoder_list,
4433 switch (encoder->type) {
4434 case INTEL_OUTPUT_LVDS:
4438 case INTEL_OUTPUT_EDP:
4440 if (intel_encoder_is_pch_edp(&encoder->base))
4448 if (HAS_PCH_IBX(dev)) {
4449 has_ck505 = dev_priv->display_clock_mode;
4450 can_ssc = has_ck505;
4456 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
4457 has_panel, has_lvds, has_pch_edp, has_cpu_edp,
4460 /* Ironlake: try to setup display ref clock before DPLL
4461 * enabling. This is only under driver's control after
4462 * PCH B stepping, previous chipset stepping should be
4463 * ignoring this setting.
4465 temp = I915_READ(PCH_DREF_CONTROL);
4466 /* Always enable nonspread source */
4467 temp &= ~DREF_NONSPREAD_SOURCE_MASK;
4470 temp |= DREF_NONSPREAD_CK505_ENABLE;
4472 temp |= DREF_NONSPREAD_SOURCE_ENABLE;
4475 temp &= ~DREF_SSC_SOURCE_MASK;
4476 temp |= DREF_SSC_SOURCE_ENABLE;
4478 /* SSC must be turned on before enabling the CPU output */
4479 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4480 DRM_DEBUG_KMS("Using SSC on panel\n");
4481 temp |= DREF_SSC1_ENABLE;
4483 temp &= ~DREF_SSC1_ENABLE;
4485 /* Get SSC going before enabling the outputs */
4486 I915_WRITE(PCH_DREF_CONTROL, temp);
4487 POSTING_READ(PCH_DREF_CONTROL);
4490 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4492 /* Enable CPU source on CPU attached eDP */
4494 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4495 DRM_DEBUG_KMS("Using SSC on eDP\n");
4496 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4499 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4501 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4503 I915_WRITE(PCH_DREF_CONTROL, temp);
4504 POSTING_READ(PCH_DREF_CONTROL);
4507 DRM_DEBUG_KMS("Disabling SSC entirely\n");
4509 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4511 /* Turn off CPU output */
4512 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4514 I915_WRITE(PCH_DREF_CONTROL, temp);
4515 POSTING_READ(PCH_DREF_CONTROL);
4518 /* Turn off the SSC source */
4519 temp &= ~DREF_SSC_SOURCE_MASK;
4520 temp |= DREF_SSC_SOURCE_DISABLE;
4523 temp &= ~ DREF_SSC1_ENABLE;
4525 I915_WRITE(PCH_DREF_CONTROL, temp);
4526 POSTING_READ(PCH_DREF_CONTROL);
4531 static int ironlake_get_refclk(struct drm_crtc *crtc)
4533 struct drm_device *dev = crtc->dev;
4534 struct drm_i915_private *dev_priv = dev->dev_private;
4535 struct intel_encoder *encoder;
4536 struct intel_encoder *edp_encoder = NULL;
4537 int num_connectors = 0;
4538 bool is_lvds = false;
4540 for_each_encoder_on_crtc(dev, crtc, encoder) {
4541 switch (encoder->type) {
4542 case INTEL_OUTPUT_LVDS:
4545 case INTEL_OUTPUT_EDP:
4546 edp_encoder = encoder;
4552 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4553 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4554 dev_priv->lvds_ssc_freq);
4555 return dev_priv->lvds_ssc_freq * 1000;
4561 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
4562 struct drm_display_mode *mode,
4563 struct drm_display_mode *adjusted_mode,
4565 struct drm_framebuffer *old_fb)
4567 struct drm_device *dev = crtc->dev;
4568 struct drm_i915_private *dev_priv = dev->dev_private;
4569 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4570 int pipe = intel_crtc->pipe;
4571 int plane = intel_crtc->plane;
4572 int refclk, num_connectors = 0;
4573 intel_clock_t clock, reduced_clock;
4574 u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
4575 bool ok, has_reduced_clock = false, is_sdvo = false;
4576 bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
4577 struct intel_encoder *encoder, *edp_encoder = NULL;
4578 const intel_limit_t *limit;
4580 struct fdi_m_n m_n = {0};
4582 int target_clock, pixel_multiplier, lane, link_bw, factor;
4583 unsigned int pipe_bpp;
4585 bool is_cpu_edp = false, is_pch_edp = false;
4587 for_each_encoder_on_crtc(dev, crtc, encoder) {
4588 switch (encoder->type) {
4589 case INTEL_OUTPUT_LVDS:
4592 case INTEL_OUTPUT_SDVO:
4593 case INTEL_OUTPUT_HDMI:
4595 if (encoder->needs_tv_clock)
4598 case INTEL_OUTPUT_TVOUT:
4601 case INTEL_OUTPUT_ANALOG:
4604 case INTEL_OUTPUT_DISPLAYPORT:
4607 case INTEL_OUTPUT_EDP:
4609 if (intel_encoder_is_pch_edp(&encoder->base))
4613 edp_encoder = encoder;
4620 refclk = ironlake_get_refclk(crtc);
4623 * Returns a set of divisors for the desired target clock with the given
4624 * refclk, or FALSE. The returned values represent the clock equation:
4625 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4627 limit = intel_limit(crtc, refclk);
4628 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4631 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4635 /* Ensure that the cursor is valid for the new mode before changing... */
4636 intel_crtc_update_cursor(crtc, true);
4638 if (is_lvds && dev_priv->lvds_downclock_avail) {
4640 * Ensure we match the reduced clock's P to the target clock.
4641 * If the clocks don't match, we can't switch the display clock
4642 * by using the FP0/FP1. In such case we will disable the LVDS
4643 * downclock feature.
4645 has_reduced_clock = limit->find_pll(limit, crtc,
4646 dev_priv->lvds_downclock,
4652 if (is_sdvo && is_tv)
4653 i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
4657 pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
4659 /* CPU eDP doesn't require FDI link, so just set DP M/N
4660 according to current link config */
4662 intel_edp_link_config(edp_encoder, &lane, &link_bw);
4664 /* FDI is a binary signal running at ~2.7GHz, encoding
4665 * each output octet as 10 bits. The actual frequency
4666 * is stored as a divider into a 100MHz clock, and the
4667 * mode pixel clock is stored in units of 1KHz.
4668 * Hence the bw of each lane in terms of the mode signal
4671 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
4674 /* [e]DP over FDI requires target mode clock instead of link clock. */
4676 target_clock = intel_edp_target_clock(edp_encoder, mode);
4678 target_clock = mode->clock;
4680 target_clock = adjusted_mode->clock;
4682 /* determine panel color depth */
4683 temp = I915_READ(PIPECONF(pipe));
4684 temp &= ~PIPE_BPC_MASK;
4685 dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
4700 WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n",
4707 intel_crtc->bpp = pipe_bpp;
4708 I915_WRITE(PIPECONF(pipe), temp);
4712 * Account for spread spectrum to avoid
4713 * oversubscribing the link. Max center spread
4714 * is 2.5%; use 5% for safety's sake.
4716 u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
4717 lane = bps / (link_bw * 8) + 1;
4720 intel_crtc->fdi_lanes = lane;
4722 if (pixel_multiplier > 1)
4723 link_bw *= pixel_multiplier;
4724 ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
4727 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
4728 if (has_reduced_clock)
4729 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
4732 /* Enable autotuning of the PLL clock (if permissible) */
4735 if ((intel_panel_use_ssc(dev_priv) &&
4736 dev_priv->lvds_ssc_freq == 100) ||
4737 (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
4739 } else if (is_sdvo && is_tv)
4742 if (clock.m < factor * clock.n)
4748 dpll |= DPLLB_MODE_LVDS;
4750 dpll |= DPLLB_MODE_DAC_SERIAL;
4752 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
4753 if (pixel_multiplier > 1) {
4754 dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
4756 dpll |= DPLL_DVO_HIGH_SPEED;
4758 if (is_dp && !is_cpu_edp)
4759 dpll |= DPLL_DVO_HIGH_SPEED;
4761 /* compute bitmask from p1 value */
4762 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4764 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4768 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4771 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4774 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4777 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4781 if (is_sdvo && is_tv)
4782 dpll |= PLL_REF_INPUT_TVCLKINBC;
4784 /* XXX: just matching BIOS for now */
4785 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4787 else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4788 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4790 dpll |= PLL_REF_INPUT_DREFCLK;
4792 /* setup pipeconf */
4793 pipeconf = I915_READ(PIPECONF(pipe));
4795 /* Set up the display plane register */
4796 dspcntr = DISPPLANE_GAMMA_ENABLE;
4798 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
4799 drm_mode_debug_printmodeline(mode);
4801 /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
4802 * pre-Haswell/LPT generation */
4803 if (HAS_PCH_LPT(dev)) {
4804 DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
4806 } else if (!is_cpu_edp) {
4807 struct intel_pch_pll *pll;
4809 pll = intel_get_pch_pll(intel_crtc, dpll, fp);
4811 DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
4816 intel_put_pch_pll(intel_crtc);
4818 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
4819 * This is an exception to the general rule that mode_set doesn't turn
4823 temp = I915_READ(PCH_LVDS);
4824 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
4825 if (HAS_PCH_CPT(dev)) {
4826 temp &= ~PORT_TRANS_SEL_MASK;
4827 temp |= PORT_TRANS_SEL_CPT(pipe);
4830 temp |= LVDS_PIPEB_SELECT;
4832 temp &= ~LVDS_PIPEB_SELECT;
4835 /* set the corresponsding LVDS_BORDER bit */
4836 temp |= dev_priv->lvds_border_bits;
4837 /* Set the B0-B3 data pairs corresponding to whether we're going to
4838 * set the DPLLs for dual-channel mode or not.
4841 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
4843 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
4845 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
4846 * appropriately here, but we need to look more thoroughly into how
4847 * panels behave in the two modes.
4849 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
4850 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
4851 temp |= LVDS_HSYNC_POLARITY;
4852 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
4853 temp |= LVDS_VSYNC_POLARITY;
4854 I915_WRITE(PCH_LVDS, temp);
4857 pipeconf &= ~PIPECONF_DITHER_EN;
4858 pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
4859 if ((is_lvds && dev_priv->lvds_dither) || dither) {
4860 pipeconf |= PIPECONF_DITHER_EN;
4861 pipeconf |= PIPECONF_DITHER_TYPE_SP;
4863 if (is_dp && !is_cpu_edp) {
4864 intel_dp_set_m_n(crtc, mode, adjusted_mode);
4866 /* For non-DP output, clear any trans DP clock recovery setting.*/
4867 I915_WRITE(TRANSDATA_M1(pipe), 0);
4868 I915_WRITE(TRANSDATA_N1(pipe), 0);
4869 I915_WRITE(TRANSDPLINK_M1(pipe), 0);
4870 I915_WRITE(TRANSDPLINK_N1(pipe), 0);
4873 if (intel_crtc->pch_pll) {
4874 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
4876 /* Wait for the clocks to stabilize. */
4877 POSTING_READ(intel_crtc->pch_pll->pll_reg);
4880 /* The pixel multiplier can only be updated once the
4881 * DPLL is enabled and the clocks are stable.
4883 * So write it again.
4885 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
4888 intel_crtc->lowfreq_avail = false;
4889 if (intel_crtc->pch_pll) {
4890 if (is_lvds && has_reduced_clock && i915_powersave) {
4891 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
4892 intel_crtc->lowfreq_avail = true;
4894 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
4898 pipeconf &= ~PIPECONF_INTERLACE_MASK;
4899 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4900 pipeconf |= PIPECONF_INTERLACED_ILK;
4901 /* the chip adds 2 halflines automatically */
4902 adjusted_mode->crtc_vtotal -= 1;
4903 adjusted_mode->crtc_vblank_end -= 1;
4904 I915_WRITE(VSYNCSHIFT(pipe),
4905 adjusted_mode->crtc_hsync_start
4906 - adjusted_mode->crtc_htotal/2);
4908 pipeconf |= PIPECONF_PROGRESSIVE;
4909 I915_WRITE(VSYNCSHIFT(pipe), 0);
4912 I915_WRITE(HTOTAL(pipe),
4913 (adjusted_mode->crtc_hdisplay - 1) |
4914 ((adjusted_mode->crtc_htotal - 1) << 16));
4915 I915_WRITE(HBLANK(pipe),
4916 (adjusted_mode->crtc_hblank_start - 1) |
4917 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4918 I915_WRITE(HSYNC(pipe),
4919 (adjusted_mode->crtc_hsync_start - 1) |
4920 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4922 I915_WRITE(VTOTAL(pipe),
4923 (adjusted_mode->crtc_vdisplay - 1) |
4924 ((adjusted_mode->crtc_vtotal - 1) << 16));
4925 I915_WRITE(VBLANK(pipe),
4926 (adjusted_mode->crtc_vblank_start - 1) |
4927 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4928 I915_WRITE(VSYNC(pipe),
4929 (adjusted_mode->crtc_vsync_start - 1) |
4930 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4932 /* pipesrc controls the size that is scaled from, which should
4933 * always be the user's requested size.
4935 I915_WRITE(PIPESRC(pipe),
4936 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4938 I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
4939 I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
4940 I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
4941 I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
4944 ironlake_set_pll_edp(crtc, adjusted_mode->clock);
4946 I915_WRITE(PIPECONF(pipe), pipeconf);
4947 POSTING_READ(PIPECONF(pipe));
4949 intel_wait_for_vblank(dev, pipe);
4951 I915_WRITE(DSPCNTR(plane), dspcntr);
4952 POSTING_READ(DSPCNTR(plane));
4954 ret = intel_pipe_set_base(crtc, x, y, old_fb);
4956 intel_update_watermarks(dev);
4958 intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
4963 static int intel_crtc_mode_set(struct drm_crtc *crtc,
4964 struct drm_display_mode *mode,
4965 struct drm_display_mode *adjusted_mode,
4967 struct drm_framebuffer *old_fb)
4969 struct drm_device *dev = crtc->dev;
4970 struct drm_i915_private *dev_priv = dev->dev_private;
4971 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4972 int pipe = intel_crtc->pipe;
4975 drm_vblank_pre_modeset(dev, pipe);
4977 ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
4979 drm_vblank_post_modeset(dev, pipe);
4982 intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
4984 intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
4989 static bool intel_eld_uptodate(struct drm_connector *connector,
4990 int reg_eldv, uint32_t bits_eldv,
4991 int reg_elda, uint32_t bits_elda,
4994 struct drm_i915_private *dev_priv = connector->dev->dev_private;
4995 uint8_t *eld = connector->eld;
4998 i = I915_READ(reg_eldv);
5007 i = I915_READ(reg_elda);
5009 I915_WRITE(reg_elda, i);
5011 for (i = 0; i < eld[2]; i++)
5012 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
5018 static void g4x_write_eld(struct drm_connector *connector,
5019 struct drm_crtc *crtc)
5021 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5022 uint8_t *eld = connector->eld;
5027 i = I915_READ(G4X_AUD_VID_DID);
5029 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
5030 eldv = G4X_ELDV_DEVCL_DEVBLC;
5032 eldv = G4X_ELDV_DEVCTG;
5034 if (intel_eld_uptodate(connector,
5035 G4X_AUD_CNTL_ST, eldv,
5036 G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
5037 G4X_HDMIW_HDMIEDID))
5040 i = I915_READ(G4X_AUD_CNTL_ST);
5041 i &= ~(eldv | G4X_ELD_ADDR);
5042 len = (i >> 9) & 0x1f; /* ELD buffer size */
5043 I915_WRITE(G4X_AUD_CNTL_ST, i);
5048 len = min_t(uint8_t, eld[2], len);
5049 DRM_DEBUG_DRIVER("ELD size %d\n", len);
5050 for (i = 0; i < len; i++)
5051 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
5053 i = I915_READ(G4X_AUD_CNTL_ST);
5055 I915_WRITE(G4X_AUD_CNTL_ST, i);
5058 static void ironlake_write_eld(struct drm_connector *connector,
5059 struct drm_crtc *crtc)
5061 struct drm_i915_private *dev_priv = connector->dev->dev_private;
5062 uint8_t *eld = connector->eld;
5071 if (HAS_PCH_IBX(connector->dev)) {
5072 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
5073 aud_config = IBX_AUD_CONFIG_A;
5074 aud_cntl_st = IBX_AUD_CNTL_ST_A;
5075 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
5077 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
5078 aud_config = CPT_AUD_CONFIG_A;
5079 aud_cntl_st = CPT_AUD_CNTL_ST_A;
5080 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
5083 i = to_intel_crtc(crtc)->pipe;
5084 hdmiw_hdmiedid += i * 0x100;
5085 aud_cntl_st += i * 0x100;
5086 aud_config += i * 0x100;
5088 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
5090 i = I915_READ(aud_cntl_st);
5091 i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */
5093 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
5094 /* operate blindly on all ports */
5095 eldv = IBX_ELD_VALIDB;
5096 eldv |= IBX_ELD_VALIDB << 4;
5097 eldv |= IBX_ELD_VALIDB << 8;
5099 DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
5100 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
5103 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
5104 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
5105 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
5106 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
5108 I915_WRITE(aud_config, 0);
5110 if (intel_eld_uptodate(connector,
5111 aud_cntrl_st2, eldv,
5112 aud_cntl_st, IBX_ELD_ADDRESS,
5116 i = I915_READ(aud_cntrl_st2);
5118 I915_WRITE(aud_cntrl_st2, i);
5123 i = I915_READ(aud_cntl_st);
5124 i &= ~IBX_ELD_ADDRESS;
5125 I915_WRITE(aud_cntl_st, i);
5127 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
5128 DRM_DEBUG_DRIVER("ELD size %d\n", len);
5129 for (i = 0; i < len; i++)
5130 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
5132 i = I915_READ(aud_cntrl_st2);
5134 I915_WRITE(aud_cntrl_st2, i);
5137 void intel_write_eld(struct drm_encoder *encoder,
5138 struct drm_display_mode *mode)
5140 struct drm_crtc *crtc = encoder->crtc;
5141 struct drm_connector *connector;
5142 struct drm_device *dev = encoder->dev;
5143 struct drm_i915_private *dev_priv = dev->dev_private;
5145 connector = drm_select_eld(encoder, mode);
5149 DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
5151 drm_get_connector_name(connector),
5152 connector->encoder->base.id,
5153 drm_get_encoder_name(connector->encoder));
5155 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
5157 if (dev_priv->display.write_eld)
5158 dev_priv->display.write_eld(connector, crtc);
5161 /** Loads the palette/gamma unit for the CRTC with the prepared values */
5162 void intel_crtc_load_lut(struct drm_crtc *crtc)
5164 struct drm_device *dev = crtc->dev;
5165 struct drm_i915_private *dev_priv = dev->dev_private;
5166 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5167 int palreg = PALETTE(intel_crtc->pipe);
5170 /* The clocks have to be on to load the palette. */
5171 if (!crtc->enabled || !intel_crtc->active)
5174 /* use legacy palette for Ironlake */
5175 if (HAS_PCH_SPLIT(dev))
5176 palreg = LGC_PALETTE(intel_crtc->pipe);
5178 for (i = 0; i < 256; i++) {
5179 I915_WRITE(palreg + 4 * i,
5180 (intel_crtc->lut_r[i] << 16) |
5181 (intel_crtc->lut_g[i] << 8) |
5182 intel_crtc->lut_b[i]);
5186 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
5188 struct drm_device *dev = crtc->dev;
5189 struct drm_i915_private *dev_priv = dev->dev_private;
5190 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5191 bool visible = base != 0;
5194 if (intel_crtc->cursor_visible == visible)
5197 cntl = I915_READ(_CURACNTR);
5199 /* On these chipsets we can only modify the base whilst
5200 * the cursor is disabled.
5202 I915_WRITE(_CURABASE, base);
5204 cntl &= ~(CURSOR_FORMAT_MASK);
5205 /* XXX width must be 64, stride 256 => 0x00 << 28 */
5206 cntl |= CURSOR_ENABLE |
5207 CURSOR_GAMMA_ENABLE |
5210 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
5211 I915_WRITE(_CURACNTR, cntl);
5213 intel_crtc->cursor_visible = visible;
5216 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
5218 struct drm_device *dev = crtc->dev;
5219 struct drm_i915_private *dev_priv = dev->dev_private;
5220 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5221 int pipe = intel_crtc->pipe;
5222 bool visible = base != 0;
5224 if (intel_crtc->cursor_visible != visible) {
5225 uint32_t cntl = I915_READ(CURCNTR(pipe));
5227 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
5228 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
5229 cntl |= pipe << 28; /* Connect to correct pipe */
5231 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
5232 cntl |= CURSOR_MODE_DISABLE;
5234 I915_WRITE(CURCNTR(pipe), cntl);
5236 intel_crtc->cursor_visible = visible;
5238 /* and commit changes on next vblank */
5239 I915_WRITE(CURBASE(pipe), base);
5242 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
5244 struct drm_device *dev = crtc->dev;
5245 struct drm_i915_private *dev_priv = dev->dev_private;
5246 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5247 int pipe = intel_crtc->pipe;
5248 bool visible = base != 0;
5250 if (intel_crtc->cursor_visible != visible) {
5251 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
5253 cntl &= ~CURSOR_MODE;
5254 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
5256 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
5257 cntl |= CURSOR_MODE_DISABLE;
5259 I915_WRITE(CURCNTR_IVB(pipe), cntl);
5261 intel_crtc->cursor_visible = visible;
5263 /* and commit changes on next vblank */
5264 I915_WRITE(CURBASE_IVB(pipe), base);
5267 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
5268 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
5271 struct drm_device *dev = crtc->dev;
5272 struct drm_i915_private *dev_priv = dev->dev_private;
5273 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5274 int pipe = intel_crtc->pipe;
5275 int x = intel_crtc->cursor_x;
5276 int y = intel_crtc->cursor_y;
5282 if (on && crtc->enabled && crtc->fb) {
5283 base = intel_crtc->cursor_addr;
5284 if (x > (int) crtc->fb->width)
5287 if (y > (int) crtc->fb->height)
5293 if (x + intel_crtc->cursor_width < 0)
5296 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
5299 pos |= x << CURSOR_X_SHIFT;
5302 if (y + intel_crtc->cursor_height < 0)
5305 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
5308 pos |= y << CURSOR_Y_SHIFT;
5310 visible = base != 0;
5311 if (!visible && !intel_crtc->cursor_visible)
5314 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
5315 I915_WRITE(CURPOS_IVB(pipe), pos);
5316 ivb_update_cursor(crtc, base);
5318 I915_WRITE(CURPOS(pipe), pos);
5319 if (IS_845G(dev) || IS_I865G(dev))
5320 i845_update_cursor(crtc, base);
5322 i9xx_update_cursor(crtc, base);
5326 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
5327 struct drm_file *file,
5329 uint32_t width, uint32_t height)
5331 struct drm_device *dev = crtc->dev;
5332 struct drm_i915_private *dev_priv = dev->dev_private;
5333 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5334 struct drm_i915_gem_object *obj;
5338 DRM_DEBUG_KMS("\n");
5340 /* if we want to turn off the cursor ignore width and height */
5342 DRM_DEBUG_KMS("cursor off\n");
5345 mutex_lock(&dev->struct_mutex);
5349 /* Currently we only support 64x64 cursors */
5350 if (width != 64 || height != 64) {
5351 DRM_ERROR("we currently only support 64x64 cursors\n");
5355 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
5356 if (&obj->base == NULL)
5359 if (obj->base.size < width * height * 4) {
5360 DRM_ERROR("buffer is to small\n");
5365 /* we only need to pin inside GTT if cursor is non-phy */
5366 mutex_lock(&dev->struct_mutex);
5367 if (!dev_priv->info->cursor_needs_physical) {
5368 if (obj->tiling_mode) {
5369 DRM_ERROR("cursor cannot be tiled\n");
5374 ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
5376 DRM_ERROR("failed to move cursor bo into the GTT\n");
5380 ret = i915_gem_object_put_fence(obj);
5382 DRM_ERROR("failed to release fence for cursor");
5386 addr = obj->gtt_offset;
5388 int align = IS_I830(dev) ? 16 * 1024 : 256;
5389 ret = i915_gem_attach_phys_object(dev, obj,
5390 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
5393 DRM_ERROR("failed to attach phys object\n");
5396 addr = obj->phys_obj->handle->busaddr;
5400 I915_WRITE(CURSIZE, (height << 12) | width);
5403 if (intel_crtc->cursor_bo) {
5404 if (dev_priv->info->cursor_needs_physical) {
5405 if (intel_crtc->cursor_bo != obj)
5406 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
5408 i915_gem_object_unpin(intel_crtc->cursor_bo);
5409 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
5412 mutex_unlock(&dev->struct_mutex);
5414 intel_crtc->cursor_addr = addr;
5415 intel_crtc->cursor_bo = obj;
5416 intel_crtc->cursor_width = width;
5417 intel_crtc->cursor_height = height;
5419 intel_crtc_update_cursor(crtc, true);
5423 i915_gem_object_unpin(obj);
5425 mutex_unlock(&dev->struct_mutex);
5427 drm_gem_object_unreference_unlocked(&obj->base);
5431 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
5433 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5435 intel_crtc->cursor_x = x;
5436 intel_crtc->cursor_y = y;
5438 intel_crtc_update_cursor(crtc, true);
5443 /** Sets the color ramps on behalf of RandR */
5444 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
5445 u16 blue, int regno)
5447 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5449 intel_crtc->lut_r[regno] = red >> 8;
5450 intel_crtc->lut_g[regno] = green >> 8;
5451 intel_crtc->lut_b[regno] = blue >> 8;
5454 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
5455 u16 *blue, int regno)
5457 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5459 *red = intel_crtc->lut_r[regno] << 8;
5460 *green = intel_crtc->lut_g[regno] << 8;
5461 *blue = intel_crtc->lut_b[regno] << 8;
5464 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
5465 u16 *blue, uint32_t start, uint32_t size)
5467 int end = (start + size > 256) ? 256 : start + size, i;
5468 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5470 for (i = start; i < end; i++) {
5471 intel_crtc->lut_r[i] = red[i] >> 8;
5472 intel_crtc->lut_g[i] = green[i] >> 8;
5473 intel_crtc->lut_b[i] = blue[i] >> 8;
5476 intel_crtc_load_lut(crtc);
5480 * Get a pipe with a simple mode set on it for doing load-based monitor
5483 * It will be up to the load-detect code to adjust the pipe as appropriate for
5484 * its requirements. The pipe will be connected to no other encoders.
5486 * Currently this code will only succeed if there is a pipe with no encoders
5487 * configured for it. In the future, it could choose to temporarily disable
5488 * some outputs to free up a pipe for its use.
5490 * \return crtc, or NULL if no pipes are available.
5493 /* VESA 640x480x72Hz mode to set on the pipe */
5494 static struct drm_display_mode load_detect_mode = {
5495 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
5496 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
5499 static struct drm_framebuffer *
5500 intel_framebuffer_create(struct drm_device *dev,
5501 struct drm_mode_fb_cmd2 *mode_cmd,
5502 struct drm_i915_gem_object *obj)
5504 struct intel_framebuffer *intel_fb;
5507 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
5509 drm_gem_object_unreference_unlocked(&obj->base);
5510 return ERR_PTR(-ENOMEM);
5513 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
5515 drm_gem_object_unreference_unlocked(&obj->base);
5517 return ERR_PTR(ret);
5520 return &intel_fb->base;
5524 intel_framebuffer_pitch_for_width(int width, int bpp)
5526 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
5527 return ALIGN(pitch, 64);
5531 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
5533 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
5534 return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
5537 static struct drm_framebuffer *
5538 intel_framebuffer_create_for_mode(struct drm_device *dev,
5539 struct drm_display_mode *mode,
5542 struct drm_i915_gem_object *obj;
5543 struct drm_mode_fb_cmd2 mode_cmd;
5545 obj = i915_gem_alloc_object(dev,
5546 intel_framebuffer_size_for_mode(mode, bpp));
5548 return ERR_PTR(-ENOMEM);
5550 mode_cmd.width = mode->hdisplay;
5551 mode_cmd.height = mode->vdisplay;
5552 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
5554 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
5556 return intel_framebuffer_create(dev, &mode_cmd, obj);
5559 static struct drm_framebuffer *
5560 mode_fits_in_fbdev(struct drm_device *dev,
5561 struct drm_display_mode *mode)
5563 struct drm_i915_private *dev_priv = dev->dev_private;
5564 struct drm_i915_gem_object *obj;
5565 struct drm_framebuffer *fb;
5567 if (dev_priv->fbdev == NULL)
5570 obj = dev_priv->fbdev->ifb.obj;
5574 fb = &dev_priv->fbdev->ifb.base;
5575 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
5576 fb->bits_per_pixel))
5579 if (obj->base.size < mode->vdisplay * fb->pitches[0])
5585 bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
5586 struct drm_connector *connector,
5587 struct drm_display_mode *mode,
5588 struct intel_load_detect_pipe *old)
5590 struct intel_crtc *intel_crtc;
5591 struct drm_crtc *possible_crtc;
5592 struct drm_encoder *encoder = &intel_encoder->base;
5593 struct drm_crtc *crtc = NULL;
5594 struct drm_device *dev = encoder->dev;
5595 struct drm_framebuffer *old_fb;
5598 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
5599 connector->base.id, drm_get_connector_name(connector),
5600 encoder->base.id, drm_get_encoder_name(encoder));
5603 * Algorithm gets a little messy:
5605 * - if the connector already has an assigned crtc, use it (but make
5606 * sure it's on first)
5608 * - try to find the first unused crtc that can drive this connector,
5609 * and use that if we find one
5612 /* See if we already have a CRTC for this connector */
5613 if (encoder->crtc) {
5614 crtc = encoder->crtc;
5616 intel_crtc = to_intel_crtc(crtc);
5617 old->dpms_mode = intel_crtc->dpms_mode;
5618 old->load_detect_temp = false;
5620 /* Make sure the crtc and connector are running */
5621 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
5622 struct drm_encoder_helper_funcs *encoder_funcs;
5623 struct drm_crtc_helper_funcs *crtc_funcs;
5625 crtc_funcs = crtc->helper_private;
5626 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
5628 encoder_funcs = encoder->helper_private;
5629 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
5635 /* Find an unused one (if possible) */
5636 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
5638 if (!(encoder->possible_crtcs & (1 << i)))
5640 if (!possible_crtc->enabled) {
5641 crtc = possible_crtc;
5647 * If we didn't find an unused CRTC, don't use any.
5650 DRM_DEBUG_KMS("no pipe available for load-detect\n");
5654 encoder->crtc = crtc;
5655 connector->encoder = encoder;
5657 intel_crtc = to_intel_crtc(crtc);
5658 old->dpms_mode = intel_crtc->dpms_mode;
5659 old->load_detect_temp = true;
5660 old->release_fb = NULL;
5663 mode = &load_detect_mode;
5667 /* We need a framebuffer large enough to accommodate all accesses
5668 * that the plane may generate whilst we perform load detection.
5669 * We can not rely on the fbcon either being present (we get called
5670 * during its initialisation to detect all boot displays, or it may
5671 * not even exist) or that it is large enough to satisfy the
5674 crtc->fb = mode_fits_in_fbdev(dev, mode);
5675 if (crtc->fb == NULL) {
5676 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
5677 crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
5678 old->release_fb = crtc->fb;
5680 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
5681 if (IS_ERR(crtc->fb)) {
5682 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
5687 if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
5688 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
5689 if (old->release_fb)
5690 old->release_fb->funcs->destroy(old->release_fb);
5695 /* let the connector get through one full cycle before testing */
5696 intel_wait_for_vblank(dev, intel_crtc->pipe);
5701 void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
5702 struct drm_connector *connector,
5703 struct intel_load_detect_pipe *old)
5705 struct drm_encoder *encoder = &intel_encoder->base;
5706 struct drm_device *dev = encoder->dev;
5707 struct drm_crtc *crtc = encoder->crtc;
5708 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
5709 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
5711 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
5712 connector->base.id, drm_get_connector_name(connector),
5713 encoder->base.id, drm_get_encoder_name(encoder));
5715 if (old->load_detect_temp) {
5716 connector->encoder = NULL;
5717 drm_helper_disable_unused_functions(dev);
5719 if (old->release_fb)
5720 old->release_fb->funcs->destroy(old->release_fb);
5725 /* Switch crtc and encoder back off if necessary */
5726 if (old->dpms_mode != DRM_MODE_DPMS_ON) {
5727 encoder_funcs->dpms(encoder, old->dpms_mode);
5728 crtc_funcs->dpms(crtc, old->dpms_mode);
5732 /* Returns the clock of the currently programmed mode of the given pipe. */
5733 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
5735 struct drm_i915_private *dev_priv = dev->dev_private;
5736 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5737 int pipe = intel_crtc->pipe;
5738 u32 dpll = I915_READ(DPLL(pipe));
5740 intel_clock_t clock;
5742 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
5743 fp = I915_READ(FP0(pipe));
5745 fp = I915_READ(FP1(pipe));
5747 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
5748 if (IS_PINEVIEW(dev)) {
5749 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
5750 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
5752 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
5753 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
5756 if (!IS_GEN2(dev)) {
5757 if (IS_PINEVIEW(dev))
5758 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
5759 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
5761 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
5762 DPLL_FPA01_P1_POST_DIV_SHIFT);
5764 switch (dpll & DPLL_MODE_MASK) {
5765 case DPLLB_MODE_DAC_SERIAL:
5766 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
5769 case DPLLB_MODE_LVDS:
5770 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
5774 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
5775 "mode\n", (int)(dpll & DPLL_MODE_MASK));
5779 /* XXX: Handle the 100Mhz refclk */
5780 intel_clock(dev, 96000, &clock);
5782 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
5785 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
5786 DPLL_FPA01_P1_POST_DIV_SHIFT);
5789 if ((dpll & PLL_REF_INPUT_MASK) ==
5790 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
5791 /* XXX: might not be 66MHz */
5792 intel_clock(dev, 66000, &clock);
5794 intel_clock(dev, 48000, &clock);
5796 if (dpll & PLL_P1_DIVIDE_BY_TWO)
5799 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
5800 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
5802 if (dpll & PLL_P2_DIVIDE_BY_4)
5807 intel_clock(dev, 48000, &clock);
5811 /* XXX: It would be nice to validate the clocks, but we can't reuse
5812 * i830PllIsValid() because it relies on the xf86_config connector
5813 * configuration being accurate, which it isn't necessarily.
5819 /** Returns the currently programmed mode of the given pipe. */
5820 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
5821 struct drm_crtc *crtc)
5823 struct drm_i915_private *dev_priv = dev->dev_private;
5824 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5825 int pipe = intel_crtc->pipe;
5826 struct drm_display_mode *mode;
5827 int htot = I915_READ(HTOTAL(pipe));
5828 int hsync = I915_READ(HSYNC(pipe));
5829 int vtot = I915_READ(VTOTAL(pipe));
5830 int vsync = I915_READ(VSYNC(pipe));
5832 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
5836 mode->clock = intel_crtc_clock_get(dev, crtc);
5837 mode->hdisplay = (htot & 0xffff) + 1;
5838 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
5839 mode->hsync_start = (hsync & 0xffff) + 1;
5840 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
5841 mode->vdisplay = (vtot & 0xffff) + 1;
5842 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
5843 mode->vsync_start = (vsync & 0xffff) + 1;
5844 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
5846 drm_mode_set_name(mode);
5851 #define GPU_IDLE_TIMEOUT 500 /* ms */
5853 /* When this timer fires, we've been idle for awhile */
5854 static void intel_gpu_idle_timer(unsigned long arg)
5856 struct drm_device *dev = (struct drm_device *)arg;
5857 drm_i915_private_t *dev_priv = dev->dev_private;
5859 if (!list_empty(&dev_priv->mm.active_list)) {
5860 /* Still processing requests, so just re-arm the timer. */
5861 mod_timer(&dev_priv->idle_timer, jiffies +
5862 msecs_to_jiffies(GPU_IDLE_TIMEOUT));
5866 dev_priv->busy = false;
5867 queue_work(dev_priv->wq, &dev_priv->idle_work);
5870 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
5872 static void intel_crtc_idle_timer(unsigned long arg)
5874 struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
5875 struct drm_crtc *crtc = &intel_crtc->base;
5876 drm_i915_private_t *dev_priv = crtc->dev->dev_private;
5877 struct intel_framebuffer *intel_fb;
5879 intel_fb = to_intel_framebuffer(crtc->fb);
5880 if (intel_fb && intel_fb->obj->active) {
5881 /* The framebuffer is still being accessed by the GPU. */
5882 mod_timer(&intel_crtc->idle_timer, jiffies +
5883 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
5887 intel_crtc->busy = false;
5888 queue_work(dev_priv->wq, &dev_priv->idle_work);
5891 static void intel_increase_pllclock(struct drm_crtc *crtc)
5893 struct drm_device *dev = crtc->dev;
5894 drm_i915_private_t *dev_priv = dev->dev_private;
5895 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5896 int pipe = intel_crtc->pipe;
5897 int dpll_reg = DPLL(pipe);
5900 if (HAS_PCH_SPLIT(dev))
5903 if (!dev_priv->lvds_downclock_avail)
5906 dpll = I915_READ(dpll_reg);
5907 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
5908 DRM_DEBUG_DRIVER("upclocking LVDS\n");
5910 assert_panel_unlocked(dev_priv, pipe);
5912 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
5913 I915_WRITE(dpll_reg, dpll);
5914 intel_wait_for_vblank(dev, pipe);
5916 dpll = I915_READ(dpll_reg);
5917 if (dpll & DISPLAY_RATE_SELECT_FPA1)
5918 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
5921 /* Schedule downclock */
5922 mod_timer(&intel_crtc->idle_timer, jiffies +
5923 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
5926 static void intel_decrease_pllclock(struct drm_crtc *crtc)
5928 struct drm_device *dev = crtc->dev;
5929 drm_i915_private_t *dev_priv = dev->dev_private;
5930 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5932 if (HAS_PCH_SPLIT(dev))
5935 if (!dev_priv->lvds_downclock_avail)
5939 * Since this is called by a timer, we should never get here in
5942 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
5943 int pipe = intel_crtc->pipe;
5944 int dpll_reg = DPLL(pipe);
5947 DRM_DEBUG_DRIVER("downclocking LVDS\n");
5949 assert_panel_unlocked(dev_priv, pipe);
5951 dpll = I915_READ(dpll_reg);
5952 dpll |= DISPLAY_RATE_SELECT_FPA1;
5953 I915_WRITE(dpll_reg, dpll);
5954 intel_wait_for_vblank(dev, pipe);
5955 dpll = I915_READ(dpll_reg);
5956 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
5957 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
5963 * intel_idle_update - adjust clocks for idleness
5964 * @work: work struct
5966 * Either the GPU or display (or both) went idle. Check the busy status
5967 * here and adjust the CRTC and GPU clocks as necessary.
5969 static void intel_idle_update(struct work_struct *work)
5971 drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
5973 struct drm_device *dev = dev_priv->dev;
5974 struct drm_crtc *crtc;
5975 struct intel_crtc *intel_crtc;
5977 if (!i915_powersave)
5980 mutex_lock(&dev->struct_mutex);
5982 i915_update_gfx_val(dev_priv);
5984 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
5985 /* Skip inactive CRTCs */
5989 intel_crtc = to_intel_crtc(crtc);
5990 if (!intel_crtc->busy)
5991 intel_decrease_pllclock(crtc);
5995 mutex_unlock(&dev->struct_mutex);
5999 * intel_mark_busy - mark the GPU and possibly the display busy
6001 * @obj: object we're operating on
6003 * Callers can use this function to indicate that the GPU is busy processing
6004 * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout
6005 * buffer), we'll also mark the display as busy, so we know to increase its
6008 void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
6010 drm_i915_private_t *dev_priv = dev->dev_private;
6011 struct drm_crtc *crtc = NULL;
6012 struct intel_framebuffer *intel_fb;
6013 struct intel_crtc *intel_crtc;
6015 if (!drm_core_check_feature(dev, DRIVER_MODESET))
6018 if (!dev_priv->busy) {
6019 intel_sanitize_pm(dev);
6020 dev_priv->busy = true;
6022 mod_timer(&dev_priv->idle_timer, jiffies +
6023 msecs_to_jiffies(GPU_IDLE_TIMEOUT));
6028 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6032 intel_crtc = to_intel_crtc(crtc);
6033 intel_fb = to_intel_framebuffer(crtc->fb);
6034 if (intel_fb->obj == obj) {
6035 if (!intel_crtc->busy) {
6036 /* Non-busy -> busy, upclock */
6037 intel_increase_pllclock(crtc);
6038 intel_crtc->busy = true;
6040 /* Busy -> busy, put off timer */
6041 mod_timer(&intel_crtc->idle_timer, jiffies +
6042 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
6048 static void intel_crtc_destroy(struct drm_crtc *crtc)
6050 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6051 struct drm_device *dev = crtc->dev;
6052 struct intel_unpin_work *work;
6053 unsigned long flags;
6055 spin_lock_irqsave(&dev->event_lock, flags);
6056 work = intel_crtc->unpin_work;
6057 intel_crtc->unpin_work = NULL;
6058 spin_unlock_irqrestore(&dev->event_lock, flags);
6061 cancel_work_sync(&work->work);
6065 drm_crtc_cleanup(crtc);
6070 static void intel_unpin_work_fn(struct work_struct *__work)
6072 struct intel_unpin_work *work =
6073 container_of(__work, struct intel_unpin_work, work);
6075 mutex_lock(&work->dev->struct_mutex);
6076 intel_unpin_fb_obj(work->old_fb_obj);
6077 drm_gem_object_unreference(&work->pending_flip_obj->base);
6078 drm_gem_object_unreference(&work->old_fb_obj->base);
6080 intel_update_fbc(work->dev);
6081 mutex_unlock(&work->dev->struct_mutex);
6085 static void do_intel_finish_page_flip(struct drm_device *dev,
6086 struct drm_crtc *crtc)
6088 drm_i915_private_t *dev_priv = dev->dev_private;
6089 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6090 struct intel_unpin_work *work;
6091 struct drm_i915_gem_object *obj;
6092 struct drm_pending_vblank_event *e;
6093 struct timeval tnow, tvbl;
6094 unsigned long flags;
6096 /* Ignore early vblank irqs */
6097 if (intel_crtc == NULL)
6100 do_gettimeofday(&tnow);
6102 spin_lock_irqsave(&dev->event_lock, flags);
6103 work = intel_crtc->unpin_work;
6104 if (work == NULL || !work->pending) {
6105 spin_unlock_irqrestore(&dev->event_lock, flags);
6109 intel_crtc->unpin_work = NULL;
6113 e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
6115 /* Called before vblank count and timestamps have
6116 * been updated for the vblank interval of flip
6117 * completion? Need to increment vblank count and
6118 * add one videorefresh duration to returned timestamp
6119 * to account for this. We assume this happened if we
6120 * get called over 0.9 frame durations after the last
6121 * timestamped vblank.
6123 * This calculation can not be used with vrefresh rates
6124 * below 5Hz (10Hz to be on the safe side) without
6125 * promoting to 64 integers.
6127 if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
6128 9 * crtc->framedur_ns) {
6129 e->event.sequence++;
6130 tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
6134 e->event.tv_sec = tvbl.tv_sec;
6135 e->event.tv_usec = tvbl.tv_usec;
6137 list_add_tail(&e->base.link,
6138 &e->base.file_priv->event_list);
6139 wake_up_interruptible(&e->base.file_priv->event_wait);
6142 drm_vblank_put(dev, intel_crtc->pipe);
6144 spin_unlock_irqrestore(&dev->event_lock, flags);
6146 obj = work->old_fb_obj;
6148 atomic_clear_mask(1 << intel_crtc->plane,
6149 &obj->pending_flip.counter);
6150 if (atomic_read(&obj->pending_flip) == 0)
6151 wake_up(&dev_priv->pending_flip_queue);
6153 schedule_work(&work->work);
6155 trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
6158 void intel_finish_page_flip(struct drm_device *dev, int pipe)
6160 drm_i915_private_t *dev_priv = dev->dev_private;
6161 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
6163 do_intel_finish_page_flip(dev, crtc);
6166 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
6168 drm_i915_private_t *dev_priv = dev->dev_private;
6169 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
6171 do_intel_finish_page_flip(dev, crtc);
6174 void intel_prepare_page_flip(struct drm_device *dev, int plane)
6176 drm_i915_private_t *dev_priv = dev->dev_private;
6177 struct intel_crtc *intel_crtc =
6178 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
6179 unsigned long flags;
6181 spin_lock_irqsave(&dev->event_lock, flags);
6182 if (intel_crtc->unpin_work) {
6183 if ((++intel_crtc->unpin_work->pending) > 1)
6184 DRM_ERROR("Prepared flip multiple times\n");
6186 DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
6188 spin_unlock_irqrestore(&dev->event_lock, flags);
6191 static int intel_gen2_queue_flip(struct drm_device *dev,
6192 struct drm_crtc *crtc,
6193 struct drm_framebuffer *fb,
6194 struct drm_i915_gem_object *obj)
6196 struct drm_i915_private *dev_priv = dev->dev_private;
6197 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6199 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6202 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6206 ret = intel_ring_begin(ring, 6);
6210 /* Can't queue multiple flips, so wait for the previous
6211 * one to finish before executing the next.
6213 if (intel_crtc->plane)
6214 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
6216 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
6217 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
6218 intel_ring_emit(ring, MI_NOOP);
6219 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6220 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6221 intel_ring_emit(ring, fb->pitches[0]);
6222 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6223 intel_ring_emit(ring, 0); /* aux display base address, unused */
6224 intel_ring_advance(ring);
6228 intel_unpin_fb_obj(obj);
6233 static int intel_gen3_queue_flip(struct drm_device *dev,
6234 struct drm_crtc *crtc,
6235 struct drm_framebuffer *fb,
6236 struct drm_i915_gem_object *obj)
6238 struct drm_i915_private *dev_priv = dev->dev_private;
6239 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6241 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6244 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6248 ret = intel_ring_begin(ring, 6);
6252 if (intel_crtc->plane)
6253 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
6255 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
6256 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
6257 intel_ring_emit(ring, MI_NOOP);
6258 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
6259 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6260 intel_ring_emit(ring, fb->pitches[0]);
6261 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6262 intel_ring_emit(ring, MI_NOOP);
6264 intel_ring_advance(ring);
6268 intel_unpin_fb_obj(obj);
6273 static int intel_gen4_queue_flip(struct drm_device *dev,
6274 struct drm_crtc *crtc,
6275 struct drm_framebuffer *fb,
6276 struct drm_i915_gem_object *obj)
6278 struct drm_i915_private *dev_priv = dev->dev_private;
6279 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6280 uint32_t pf, pipesrc;
6281 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6284 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6288 ret = intel_ring_begin(ring, 4);
6292 /* i965+ uses the linear or tiled offsets from the
6293 * Display Registers (which do not change across a page-flip)
6294 * so we need only reprogram the base address.
6296 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6297 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6298 intel_ring_emit(ring, fb->pitches[0]);
6299 intel_ring_emit(ring,
6300 (obj->gtt_offset + intel_crtc->dspaddr_offset) |
6303 /* XXX Enabling the panel-fitter across page-flip is so far
6304 * untested on non-native modes, so ignore it for now.
6305 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
6308 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
6309 intel_ring_emit(ring, pf | pipesrc);
6310 intel_ring_advance(ring);
6314 intel_unpin_fb_obj(obj);
6319 static int intel_gen6_queue_flip(struct drm_device *dev,
6320 struct drm_crtc *crtc,
6321 struct drm_framebuffer *fb,
6322 struct drm_i915_gem_object *obj)
6324 struct drm_i915_private *dev_priv = dev->dev_private;
6325 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6326 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
6327 uint32_t pf, pipesrc;
6330 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6334 ret = intel_ring_begin(ring, 4);
6338 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6339 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6340 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
6341 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6343 /* Contrary to the suggestions in the documentation,
6344 * "Enable Panel Fitter" does not seem to be required when page
6345 * flipping with a non-native mode, and worse causes a normal
6347 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
6350 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
6351 intel_ring_emit(ring, pf | pipesrc);
6352 intel_ring_advance(ring);
6356 intel_unpin_fb_obj(obj);
6362 * On gen7 we currently use the blit ring because (in early silicon at least)
6363 * the render ring doesn't give us interrpts for page flip completion, which
6364 * means clients will hang after the first flip is queued. Fortunately the
6365 * blit ring generates interrupts properly, so use it instead.
6367 static int intel_gen7_queue_flip(struct drm_device *dev,
6368 struct drm_crtc *crtc,
6369 struct drm_framebuffer *fb,
6370 struct drm_i915_gem_object *obj)
6372 struct drm_i915_private *dev_priv = dev->dev_private;
6373 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6374 struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
6375 uint32_t plane_bit = 0;
6378 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6382 switch(intel_crtc->plane) {
6384 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
6387 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
6390 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
6393 WARN_ONCE(1, "unknown plane in flip command\n");
6398 ret = intel_ring_begin(ring, 4);
6402 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
6403 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
6404 intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
6405 intel_ring_emit(ring, (MI_NOOP));
6406 intel_ring_advance(ring);
6410 intel_unpin_fb_obj(obj);
6415 static int intel_default_queue_flip(struct drm_device *dev,
6416 struct drm_crtc *crtc,
6417 struct drm_framebuffer *fb,
6418 struct drm_i915_gem_object *obj)
6423 static int intel_crtc_page_flip(struct drm_crtc *crtc,
6424 struct drm_framebuffer *fb,
6425 struct drm_pending_vblank_event *event)
6427 struct drm_device *dev = crtc->dev;
6428 struct drm_i915_private *dev_priv = dev->dev_private;
6429 struct intel_framebuffer *intel_fb;
6430 struct drm_i915_gem_object *obj;
6431 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6432 struct intel_unpin_work *work;
6433 unsigned long flags;
6436 /* Can't change pixel format via MI display flips. */
6437 if (fb->pixel_format != crtc->fb->pixel_format)
6441 * TILEOFF/LINOFF registers can't be changed via MI display flips.
6442 * Note that pitch changes could also affect these register.
6444 if (INTEL_INFO(dev)->gen > 3 &&
6445 (fb->offsets[0] != crtc->fb->offsets[0] ||
6446 fb->pitches[0] != crtc->fb->pitches[0]))
6449 work = kzalloc(sizeof *work, GFP_KERNEL);
6453 work->event = event;
6454 work->dev = crtc->dev;
6455 intel_fb = to_intel_framebuffer(crtc->fb);
6456 work->old_fb_obj = intel_fb->obj;
6457 INIT_WORK(&work->work, intel_unpin_work_fn);
6459 ret = drm_vblank_get(dev, intel_crtc->pipe);
6463 /* We borrow the event spin lock for protecting unpin_work */
6464 spin_lock_irqsave(&dev->event_lock, flags);
6465 if (intel_crtc->unpin_work) {
6466 spin_unlock_irqrestore(&dev->event_lock, flags);
6468 drm_vblank_put(dev, intel_crtc->pipe);
6470 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
6473 intel_crtc->unpin_work = work;
6474 spin_unlock_irqrestore(&dev->event_lock, flags);
6476 intel_fb = to_intel_framebuffer(fb);
6477 obj = intel_fb->obj;
6479 ret = i915_mutex_lock_interruptible(dev);
6483 /* Reference the objects for the scheduled work. */
6484 drm_gem_object_reference(&work->old_fb_obj->base);
6485 drm_gem_object_reference(&obj->base);
6489 work->pending_flip_obj = obj;
6491 work->enable_stall_check = true;
6493 /* Block clients from rendering to the new back buffer until
6494 * the flip occurs and the object is no longer visible.
6496 atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
6498 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
6500 goto cleanup_pending;
6502 intel_disable_fbc(dev);
6503 intel_mark_busy(dev, obj);
6504 mutex_unlock(&dev->struct_mutex);
6506 trace_i915_flip_request(intel_crtc->plane, obj);
6511 atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
6512 drm_gem_object_unreference(&work->old_fb_obj->base);
6513 drm_gem_object_unreference(&obj->base);
6514 mutex_unlock(&dev->struct_mutex);
6517 spin_lock_irqsave(&dev->event_lock, flags);
6518 intel_crtc->unpin_work = NULL;
6519 spin_unlock_irqrestore(&dev->event_lock, flags);
6521 drm_vblank_put(dev, intel_crtc->pipe);
6528 static void intel_sanitize_modesetting(struct drm_device *dev,
6529 int pipe, int plane)
6531 struct drm_i915_private *dev_priv = dev->dev_private;
6535 /* Clear any frame start delays used for debugging left by the BIOS */
6538 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
6541 if (HAS_PCH_SPLIT(dev))
6544 /* Who knows what state these registers were left in by the BIOS or
6547 * If we leave the registers in a conflicting state (e.g. with the
6548 * display plane reading from the other pipe than the one we intend
6549 * to use) then when we attempt to teardown the active mode, we will
6550 * not disable the pipes and planes in the correct order -- leaving
6551 * a plane reading from a disabled pipe and possibly leading to
6552 * undefined behaviour.
6555 reg = DSPCNTR(plane);
6556 val = I915_READ(reg);
6558 if ((val & DISPLAY_PLANE_ENABLE) == 0)
6560 if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
6563 /* This display plane is active and attached to the other CPU pipe. */
6566 /* Disable the plane and wait for it to stop reading from the pipe. */
6567 intel_disable_plane(dev_priv, plane, pipe);
6568 intel_disable_pipe(dev_priv, pipe);
6571 static void intel_crtc_reset(struct drm_crtc *crtc)
6573 struct drm_device *dev = crtc->dev;
6574 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6576 /* Reset flags back to the 'unknown' status so that they
6577 * will be correctly set on the initial modeset.
6579 intel_crtc->dpms_mode = -1;
6581 /* We need to fix up any BIOS configuration that conflicts with
6584 intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
6587 static struct drm_crtc_helper_funcs intel_helper_funcs = {
6588 .dpms = intel_crtc_dpms,
6589 .mode_fixup = intel_crtc_mode_fixup,
6590 .mode_set = intel_crtc_mode_set,
6591 .mode_set_base = intel_pipe_set_base,
6592 .mode_set_base_atomic = intel_pipe_set_base_atomic,
6593 .load_lut = intel_crtc_load_lut,
6594 .disable = intel_crtc_disable,
6597 static const struct drm_crtc_funcs intel_crtc_funcs = {
6598 .reset = intel_crtc_reset,
6599 .cursor_set = intel_crtc_cursor_set,
6600 .cursor_move = intel_crtc_cursor_move,
6601 .gamma_set = intel_crtc_gamma_set,
6602 .set_config = drm_crtc_helper_set_config,
6603 .destroy = intel_crtc_destroy,
6604 .page_flip = intel_crtc_page_flip,
6607 static void intel_pch_pll_init(struct drm_device *dev)
6609 drm_i915_private_t *dev_priv = dev->dev_private;
6612 if (dev_priv->num_pch_pll == 0) {
6613 DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n");
6617 for (i = 0; i < dev_priv->num_pch_pll; i++) {
6618 dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i);
6619 dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i);
6620 dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i);
6624 static void intel_crtc_init(struct drm_device *dev, int pipe)
6626 drm_i915_private_t *dev_priv = dev->dev_private;
6627 struct intel_crtc *intel_crtc;
6630 intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
6631 if (intel_crtc == NULL)
6634 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
6636 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
6637 for (i = 0; i < 256; i++) {
6638 intel_crtc->lut_r[i] = i;
6639 intel_crtc->lut_g[i] = i;
6640 intel_crtc->lut_b[i] = i;
6643 /* Swap pipes & planes for FBC on pre-965 */
6644 intel_crtc->pipe = pipe;
6645 intel_crtc->plane = pipe;
6646 if (IS_MOBILE(dev) && IS_GEN3(dev)) {
6647 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
6648 intel_crtc->plane = !pipe;
6651 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
6652 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
6653 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
6654 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
6656 intel_crtc_reset(&intel_crtc->base);
6657 intel_crtc->active = true; /* force the pipe off on setup_init_config */
6658 intel_crtc->bpp = 24; /* default for pre-Ironlake */
6660 if (HAS_PCH_SPLIT(dev)) {
6661 intel_helper_funcs.prepare = ironlake_crtc_prepare;
6662 intel_helper_funcs.commit = ironlake_crtc_commit;
6664 intel_helper_funcs.prepare = i9xx_crtc_prepare;
6665 intel_helper_funcs.commit = i9xx_crtc_commit;
6668 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
6670 intel_crtc->busy = false;
6672 setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
6673 (unsigned long)intel_crtc);
6676 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
6677 struct drm_file *file)
6679 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
6680 struct drm_mode_object *drmmode_obj;
6681 struct intel_crtc *crtc;
6683 if (!drm_core_check_feature(dev, DRIVER_MODESET))
6686 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
6687 DRM_MODE_OBJECT_CRTC);
6690 DRM_ERROR("no such CRTC id\n");
6694 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
6695 pipe_from_crtc_id->pipe = crtc->pipe;
6700 static int intel_encoder_clones(struct drm_device *dev, int type_mask)
6702 struct intel_encoder *encoder;
6706 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
6707 if (type_mask & encoder->clone_mask)
6708 index_mask |= (1 << entry);
6715 static bool has_edp_a(struct drm_device *dev)
6717 struct drm_i915_private *dev_priv = dev->dev_private;
6719 if (!IS_MOBILE(dev))
6722 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
6726 (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
6732 static void intel_setup_outputs(struct drm_device *dev)
6734 struct drm_i915_private *dev_priv = dev->dev_private;
6735 struct intel_encoder *encoder;
6736 bool dpd_is_edp = false;
6739 has_lvds = intel_lvds_init(dev);
6740 if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
6741 /* disable the panel fitter on everything but LVDS */
6742 I915_WRITE(PFIT_CONTROL, 0);
6745 if (HAS_PCH_SPLIT(dev)) {
6746 dpd_is_edp = intel_dpd_is_edp(dev);
6749 intel_dp_init(dev, DP_A);
6751 if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
6752 intel_dp_init(dev, PCH_DP_D);
6755 intel_crt_init(dev);
6757 if (IS_HASWELL(dev)) {
6760 /* Haswell uses DDI functions to detect digital outputs */
6761 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
6762 /* DDI A only supports eDP */
6764 intel_ddi_init(dev, PORT_A);
6766 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
6768 found = I915_READ(SFUSE_STRAP);
6770 if (found & SFUSE_STRAP_DDIB_DETECTED)
6771 intel_ddi_init(dev, PORT_B);
6772 if (found & SFUSE_STRAP_DDIC_DETECTED)
6773 intel_ddi_init(dev, PORT_C);
6774 if (found & SFUSE_STRAP_DDID_DETECTED)
6775 intel_ddi_init(dev, PORT_D);
6776 } else if (HAS_PCH_SPLIT(dev)) {
6779 if (I915_READ(HDMIB) & PORT_DETECTED) {
6780 /* PCH SDVOB multiplex with HDMIB */
6781 found = intel_sdvo_init(dev, PCH_SDVOB, true);
6783 intel_hdmi_init(dev, HDMIB);
6784 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
6785 intel_dp_init(dev, PCH_DP_B);
6788 if (I915_READ(HDMIC) & PORT_DETECTED)
6789 intel_hdmi_init(dev, HDMIC);
6791 if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
6792 intel_hdmi_init(dev, HDMID);
6794 if (I915_READ(PCH_DP_C) & DP_DETECTED)
6795 intel_dp_init(dev, PCH_DP_C);
6797 if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
6798 intel_dp_init(dev, PCH_DP_D);
6799 } else if (IS_VALLEYVIEW(dev)) {
6802 if (I915_READ(SDVOB) & PORT_DETECTED) {
6803 /* SDVOB multiplex with HDMIB */
6804 found = intel_sdvo_init(dev, SDVOB, true);
6806 intel_hdmi_init(dev, SDVOB);
6807 if (!found && (I915_READ(DP_B) & DP_DETECTED))
6808 intel_dp_init(dev, DP_B);
6811 if (I915_READ(SDVOC) & PORT_DETECTED)
6812 intel_hdmi_init(dev, SDVOC);
6814 /* Shares lanes with HDMI on SDVOC */
6815 if (I915_READ(DP_C) & DP_DETECTED)
6816 intel_dp_init(dev, DP_C);
6817 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
6820 if (I915_READ(SDVOB) & SDVO_DETECTED) {
6821 DRM_DEBUG_KMS("probing SDVOB\n");
6822 found = intel_sdvo_init(dev, SDVOB, true);
6823 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
6824 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
6825 intel_hdmi_init(dev, SDVOB);
6828 if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
6829 DRM_DEBUG_KMS("probing DP_B\n");
6830 intel_dp_init(dev, DP_B);
6834 /* Before G4X SDVOC doesn't have its own detect register */
6836 if (I915_READ(SDVOB) & SDVO_DETECTED) {
6837 DRM_DEBUG_KMS("probing SDVOC\n");
6838 found = intel_sdvo_init(dev, SDVOC, false);
6841 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
6843 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
6844 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
6845 intel_hdmi_init(dev, SDVOC);
6847 if (SUPPORTS_INTEGRATED_DP(dev)) {
6848 DRM_DEBUG_KMS("probing DP_C\n");
6849 intel_dp_init(dev, DP_C);
6853 if (SUPPORTS_INTEGRATED_DP(dev) &&
6854 (I915_READ(DP_D) & DP_DETECTED)) {
6855 DRM_DEBUG_KMS("probing DP_D\n");
6856 intel_dp_init(dev, DP_D);
6858 } else if (IS_GEN2(dev))
6859 intel_dvo_init(dev);
6861 if (SUPPORTS_TV(dev))
6864 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
6865 encoder->base.possible_crtcs = encoder->crtc_mask;
6866 encoder->base.possible_clones =
6867 intel_encoder_clones(dev, encoder->clone_mask);
6870 /* disable all the possible outputs/crtcs before entering KMS mode */
6871 drm_helper_disable_unused_functions(dev);
6873 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
6874 ironlake_init_pch_refclk(dev);
6877 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
6879 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
6881 drm_framebuffer_cleanup(fb);
6882 drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
6887 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
6888 struct drm_file *file,
6889 unsigned int *handle)
6891 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
6892 struct drm_i915_gem_object *obj = intel_fb->obj;
6894 return drm_gem_handle_create(file, &obj->base, handle);
6897 static const struct drm_framebuffer_funcs intel_fb_funcs = {
6898 .destroy = intel_user_framebuffer_destroy,
6899 .create_handle = intel_user_framebuffer_create_handle,
6902 int intel_framebuffer_init(struct drm_device *dev,
6903 struct intel_framebuffer *intel_fb,
6904 struct drm_mode_fb_cmd2 *mode_cmd,
6905 struct drm_i915_gem_object *obj)
6909 if (obj->tiling_mode == I915_TILING_Y)
6912 if (mode_cmd->pitches[0] & 63)
6915 switch (mode_cmd->pixel_format) {
6916 case DRM_FORMAT_RGB332:
6917 case DRM_FORMAT_RGB565:
6918 case DRM_FORMAT_XRGB8888:
6919 case DRM_FORMAT_XBGR8888:
6920 case DRM_FORMAT_ARGB8888:
6921 case DRM_FORMAT_XRGB2101010:
6922 case DRM_FORMAT_ARGB2101010:
6923 /* RGB formats are common across chipsets */
6925 case DRM_FORMAT_YUYV:
6926 case DRM_FORMAT_UYVY:
6927 case DRM_FORMAT_YVYU:
6928 case DRM_FORMAT_VYUY:
6931 DRM_DEBUG_KMS("unsupported pixel format %u\n",
6932 mode_cmd->pixel_format);
6936 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
6938 DRM_ERROR("framebuffer init failed %d\n", ret);
6942 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
6943 intel_fb->obj = obj;
6947 static struct drm_framebuffer *
6948 intel_user_framebuffer_create(struct drm_device *dev,
6949 struct drm_file *filp,
6950 struct drm_mode_fb_cmd2 *mode_cmd)
6952 struct drm_i915_gem_object *obj;
6954 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
6955 mode_cmd->handles[0]));
6956 if (&obj->base == NULL)
6957 return ERR_PTR(-ENOENT);
6959 return intel_framebuffer_create(dev, mode_cmd, obj);
6962 static const struct drm_mode_config_funcs intel_mode_funcs = {
6963 .fb_create = intel_user_framebuffer_create,
6964 .output_poll_changed = intel_fb_output_poll_changed,
6967 /* Set up chip specific display functions */
6968 static void intel_init_display(struct drm_device *dev)
6970 struct drm_i915_private *dev_priv = dev->dev_private;
6972 /* We always want a DPMS function */
6973 if (HAS_PCH_SPLIT(dev)) {
6974 dev_priv->display.dpms = ironlake_crtc_dpms;
6975 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
6976 dev_priv->display.off = ironlake_crtc_off;
6977 dev_priv->display.update_plane = ironlake_update_plane;
6979 dev_priv->display.dpms = i9xx_crtc_dpms;
6980 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
6981 dev_priv->display.off = i9xx_crtc_off;
6982 dev_priv->display.update_plane = i9xx_update_plane;
6985 /* Returns the core display clock speed */
6986 if (IS_VALLEYVIEW(dev))
6987 dev_priv->display.get_display_clock_speed =
6988 valleyview_get_display_clock_speed;
6989 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
6990 dev_priv->display.get_display_clock_speed =
6991 i945_get_display_clock_speed;
6992 else if (IS_I915G(dev))
6993 dev_priv->display.get_display_clock_speed =
6994 i915_get_display_clock_speed;
6995 else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
6996 dev_priv->display.get_display_clock_speed =
6997 i9xx_misc_get_display_clock_speed;
6998 else if (IS_I915GM(dev))
6999 dev_priv->display.get_display_clock_speed =
7000 i915gm_get_display_clock_speed;
7001 else if (IS_I865G(dev))
7002 dev_priv->display.get_display_clock_speed =
7003 i865_get_display_clock_speed;
7004 else if (IS_I85X(dev))
7005 dev_priv->display.get_display_clock_speed =
7006 i855_get_display_clock_speed;
7008 dev_priv->display.get_display_clock_speed =
7009 i830_get_display_clock_speed;
7011 if (HAS_PCH_SPLIT(dev)) {
7013 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
7014 dev_priv->display.write_eld = ironlake_write_eld;
7015 } else if (IS_GEN6(dev)) {
7016 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
7017 dev_priv->display.write_eld = ironlake_write_eld;
7018 } else if (IS_IVYBRIDGE(dev)) {
7019 /* FIXME: detect B0+ stepping and use auto training */
7020 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
7021 dev_priv->display.write_eld = ironlake_write_eld;
7022 } else if (IS_HASWELL(dev)) {
7023 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
7024 dev_priv->display.write_eld = ironlake_write_eld;
7026 dev_priv->display.update_wm = NULL;
7027 } else if (IS_G4X(dev)) {
7028 dev_priv->display.write_eld = g4x_write_eld;
7031 /* Default just returns -ENODEV to indicate unsupported */
7032 dev_priv->display.queue_flip = intel_default_queue_flip;
7034 switch (INTEL_INFO(dev)->gen) {
7036 dev_priv->display.queue_flip = intel_gen2_queue_flip;
7040 dev_priv->display.queue_flip = intel_gen3_queue_flip;
7045 dev_priv->display.queue_flip = intel_gen4_queue_flip;
7049 dev_priv->display.queue_flip = intel_gen6_queue_flip;
7052 dev_priv->display.queue_flip = intel_gen7_queue_flip;
7058 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
7059 * resume, or other times. This quirk makes sure that's the case for
7062 static void quirk_pipea_force(struct drm_device *dev)
7064 struct drm_i915_private *dev_priv = dev->dev_private;
7066 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
7067 DRM_INFO("applying pipe a force quirk\n");
7071 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
7073 static void quirk_ssc_force_disable(struct drm_device *dev)
7075 struct drm_i915_private *dev_priv = dev->dev_private;
7076 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
7077 DRM_INFO("applying lvds SSC disable quirk\n");
7081 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
7084 static void quirk_invert_brightness(struct drm_device *dev)
7086 struct drm_i915_private *dev_priv = dev->dev_private;
7087 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
7088 DRM_INFO("applying inverted panel brightness quirk\n");
7091 struct intel_quirk {
7093 int subsystem_vendor;
7094 int subsystem_device;
7095 void (*hook)(struct drm_device *dev);
7098 static struct intel_quirk intel_quirks[] = {
7099 /* HP Mini needs pipe A force quirk (LP: #322104) */
7100 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
7102 /* Thinkpad R31 needs pipe A force quirk */
7103 { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
7104 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
7105 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
7107 /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
7108 { 0x3577, 0x1014, 0x0513, quirk_pipea_force },
7109 /* ThinkPad X40 needs pipe A force quirk */
7111 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
7112 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
7114 /* 855 & before need to leave pipe A & dpll A up */
7115 { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
7116 { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
7118 /* Lenovo U160 cannot use SSC on LVDS */
7119 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
7121 /* Sony Vaio Y cannot use SSC on LVDS */
7122 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
7124 /* Acer Aspire 5734Z must invert backlight brightness */
7125 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
7128 static void intel_init_quirks(struct drm_device *dev)
7130 struct pci_dev *d = dev->pdev;
7133 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
7134 struct intel_quirk *q = &intel_quirks[i];
7136 if (d->device == q->device &&
7137 (d->subsystem_vendor == q->subsystem_vendor ||
7138 q->subsystem_vendor == PCI_ANY_ID) &&
7139 (d->subsystem_device == q->subsystem_device ||
7140 q->subsystem_device == PCI_ANY_ID))
7145 /* Disable the VGA plane that we never use */
7146 static void i915_disable_vga(struct drm_device *dev)
7148 struct drm_i915_private *dev_priv = dev->dev_private;
7152 if (HAS_PCH_SPLIT(dev))
7153 vga_reg = CPU_VGACNTRL;
7157 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
7158 outb(SR01, VGA_SR_INDEX);
7159 sr1 = inb(VGA_SR_DATA);
7160 outb(sr1 | 1<<5, VGA_SR_DATA);
7161 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
7164 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
7165 POSTING_READ(vga_reg);
7168 void intel_modeset_init_hw(struct drm_device *dev)
7170 /* We attempt to init the necessary power wells early in the initialization
7171 * time, so the subsystems that expect power to be enabled can work.
7173 intel_init_power_wells(dev);
7175 intel_prepare_ddi(dev);
7177 intel_init_clock_gating(dev);
7179 mutex_lock(&dev->struct_mutex);
7180 intel_enable_gt_powersave(dev);
7181 mutex_unlock(&dev->struct_mutex);
7184 void intel_modeset_init(struct drm_device *dev)
7186 struct drm_i915_private *dev_priv = dev->dev_private;
7189 drm_mode_config_init(dev);
7191 dev->mode_config.min_width = 0;
7192 dev->mode_config.min_height = 0;
7194 dev->mode_config.preferred_depth = 24;
7195 dev->mode_config.prefer_shadow = 1;
7197 dev->mode_config.funcs = &intel_mode_funcs;
7199 intel_init_quirks(dev);
7203 intel_init_display(dev);
7206 dev->mode_config.max_width = 2048;
7207 dev->mode_config.max_height = 2048;
7208 } else if (IS_GEN3(dev)) {
7209 dev->mode_config.max_width = 4096;
7210 dev->mode_config.max_height = 4096;
7212 dev->mode_config.max_width = 8192;
7213 dev->mode_config.max_height = 8192;
7215 dev->mode_config.fb_base = dev_priv->mm.gtt_base_addr;
7217 DRM_DEBUG_KMS("%d display pipe%s available.\n",
7218 dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
7220 for (i = 0; i < dev_priv->num_pipe; i++) {
7221 intel_crtc_init(dev, i);
7222 ret = intel_plane_init(dev, i);
7224 DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
7227 intel_pch_pll_init(dev);
7229 /* Just disable it once at startup */
7230 i915_disable_vga(dev);
7231 intel_setup_outputs(dev);
7233 INIT_WORK(&dev_priv->idle_work, intel_idle_update);
7234 setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
7235 (unsigned long)dev);
7238 void intel_modeset_gem_init(struct drm_device *dev)
7240 intel_modeset_init_hw(dev);
7242 intel_setup_overlay(dev);
7245 void intel_modeset_cleanup(struct drm_device *dev)
7247 struct drm_i915_private *dev_priv = dev->dev_private;
7248 struct drm_crtc *crtc;
7249 struct intel_crtc *intel_crtc;
7251 drm_kms_helper_poll_fini(dev);
7252 mutex_lock(&dev->struct_mutex);
7254 intel_unregister_dsm_handler();
7257 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7258 /* Skip inactive CRTCs */
7262 intel_crtc = to_intel_crtc(crtc);
7263 intel_increase_pllclock(crtc);
7266 intel_disable_fbc(dev);
7268 intel_disable_gt_powersave(dev);
7270 ironlake_teardown_rc6(dev);
7272 if (IS_VALLEYVIEW(dev))
7275 mutex_unlock(&dev->struct_mutex);
7277 /* Disable the irq before mode object teardown, for the irq might
7278 * enqueue unpin/hotplug work. */
7279 drm_irq_uninstall(dev);
7280 cancel_work_sync(&dev_priv->hotplug_work);
7281 cancel_work_sync(&dev_priv->rps_work);
7283 /* flush any delayed tasks or pending work */
7284 flush_scheduled_work();
7286 /* Shut off idle work before the crtcs get freed. */
7287 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7288 intel_crtc = to_intel_crtc(crtc);
7289 del_timer_sync(&intel_crtc->idle_timer);
7291 del_timer_sync(&dev_priv->idle_timer);
7292 cancel_work_sync(&dev_priv->idle_work);
7294 drm_mode_config_cleanup(dev);
7298 * Return which encoder is currently attached for connector.
7300 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
7302 return &intel_attached_encoder(connector)->base;
7305 void intel_connector_attach_encoder(struct intel_connector *connector,
7306 struct intel_encoder *encoder)
7308 connector->encoder = encoder;
7309 drm_mode_connector_attach_encoder(&connector->base,
7314 * set vga decode state - true == enable VGA decode
7316 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
7318 struct drm_i915_private *dev_priv = dev->dev_private;
7321 pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
7323 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
7325 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
7326 pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
7330 #ifdef CONFIG_DEBUG_FS
7331 #include <linux/seq_file.h>
7333 struct intel_display_error_state {
7334 struct intel_cursor_error_state {
7341 struct intel_pipe_error_state {
7353 struct intel_plane_error_state {
7364 struct intel_display_error_state *
7365 intel_display_capture_error_state(struct drm_device *dev)
7367 drm_i915_private_t *dev_priv = dev->dev_private;
7368 struct intel_display_error_state *error;
7371 error = kmalloc(sizeof(*error), GFP_ATOMIC);
7375 for (i = 0; i < 2; i++) {
7376 error->cursor[i].control = I915_READ(CURCNTR(i));
7377 error->cursor[i].position = I915_READ(CURPOS(i));
7378 error->cursor[i].base = I915_READ(CURBASE(i));
7380 error->plane[i].control = I915_READ(DSPCNTR(i));
7381 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
7382 error->plane[i].size = I915_READ(DSPSIZE(i));
7383 error->plane[i].pos = I915_READ(DSPPOS(i));
7384 error->plane[i].addr = I915_READ(DSPADDR(i));
7385 if (INTEL_INFO(dev)->gen >= 4) {
7386 error->plane[i].surface = I915_READ(DSPSURF(i));
7387 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
7390 error->pipe[i].conf = I915_READ(PIPECONF(i));
7391 error->pipe[i].source = I915_READ(PIPESRC(i));
7392 error->pipe[i].htotal = I915_READ(HTOTAL(i));
7393 error->pipe[i].hblank = I915_READ(HBLANK(i));
7394 error->pipe[i].hsync = I915_READ(HSYNC(i));
7395 error->pipe[i].vtotal = I915_READ(VTOTAL(i));
7396 error->pipe[i].vblank = I915_READ(VBLANK(i));
7397 error->pipe[i].vsync = I915_READ(VSYNC(i));
7404 intel_display_print_error_state(struct seq_file *m,
7405 struct drm_device *dev,
7406 struct intel_display_error_state *error)
7410 for (i = 0; i < 2; i++) {
7411 seq_printf(m, "Pipe [%d]:\n", i);
7412 seq_printf(m, " CONF: %08x\n", error->pipe[i].conf);
7413 seq_printf(m, " SRC: %08x\n", error->pipe[i].source);
7414 seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
7415 seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
7416 seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
7417 seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
7418 seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
7419 seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
7421 seq_printf(m, "Plane [%d]:\n", i);
7422 seq_printf(m, " CNTR: %08x\n", error->plane[i].control);
7423 seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
7424 seq_printf(m, " SIZE: %08x\n", error->plane[i].size);
7425 seq_printf(m, " POS: %08x\n", error->plane[i].pos);
7426 seq_printf(m, " ADDR: %08x\n", error->plane[i].addr);
7427 if (INTEL_INFO(dev)->gen >= 4) {
7428 seq_printf(m, " SURF: %08x\n", error->plane[i].surface);
7429 seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
7432 seq_printf(m, "Cursor [%d]:\n", i);
7433 seq_printf(m, " CNTR: %08x\n", error->cursor[i].control);
7434 seq_printf(m, " POS: %08x\n", error->cursor[i].position);
7435 seq_printf(m, " BASE: %08x\n", error->cursor[i].base);