drivers/gpu/drm/i915/intel_runtime_pm.c

   1 /*
   2  * Copyright © 2012-2014 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
  21  * IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *    Eugeni Dodonov <eugeni.dodonov@intel.com>
  25  *    Daniel Vetter <daniel.vetter@ffwll.ch>
  26  *
  27  */
  28
  29 #include <linux/pm_runtime.h>
  30 #include <linux/vgaarb.h>
  31
  32 #include "i915_drv.h"
  33 #include "intel_drv.h"
  34
  35 /**
  36  * DOC: runtime pm
  37  *
  38  * The i915 driver supports dynamic enabling and disabling of entire hardware
  39  * blocks at runtime. This is especially important on the display side where
  40  * software is supposed to control many power gates manually on recent hardware,
  41  * since on the GT side a lot of the power management is done by the hardware.
  42  * But even there some manual control at the device level is required.
  43  *
  44  * Since i915 supports a diverse set of platforms with a unified codebase and
  45  * hardware engineers just love to shuffle functionality around between power
  46  * domains there's a sizeable amount of indirection required. This file provides
  47  * generic functions to the driver for grabbing and releasing references for
  48  * abstract power domains. It then maps those to the actual power wells
  49  * present for a given platform.
  50  */
  51
  52 #define for_each_power_well(i, power_well, domain_mask, power_domains)  \
  53         for (i = 0;                                                     \
  54              i < (power_domains)->power_well_count &&                   \
  55                  ((power_well) = &(power_domains)->power_wells[i]);     \
  56              i++)                                                       \
  57                 for_each_if ((power_well)->domains & (domain_mask))
  58
  59 #define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \
  60         for (i = (power_domains)->power_well_count - 1;                  \
  61              i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\
  62              i--)                                                        \
  63                 for_each_if ((power_well)->domains & (domain_mask))
  64
  65 bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
  66                                     int power_well_id);
  67
  68 const char *
  69 intel_display_power_domain_str(enum intel_display_power_domain domain)
  70 {
  71         switch (domain) {
  72         case POWER_DOMAIN_PIPE_A:
  73                 return "PIPE_A";
  74         case POWER_DOMAIN_PIPE_B:
  75                 return "PIPE_B";
  76         case POWER_DOMAIN_PIPE_C:
  77                 return "PIPE_C";
  78         case POWER_DOMAIN_PIPE_A_PANEL_FITTER:
  79                 return "PIPE_A_PANEL_FITTER";
  80         case POWER_DOMAIN_PIPE_B_PANEL_FITTER:
  81                 return "PIPE_B_PANEL_FITTER";
  82         case POWER_DOMAIN_PIPE_C_PANEL_FITTER:
  83                 return "PIPE_C_PANEL_FITTER";
  84         case POWER_DOMAIN_TRANSCODER_A:
  85                 return "TRANSCODER_A";
  86         case POWER_DOMAIN_TRANSCODER_B:
  87                 return "TRANSCODER_B";
  88         case POWER_DOMAIN_TRANSCODER_C:
  89                 return "TRANSCODER_C";
  90         case POWER_DOMAIN_TRANSCODER_EDP:
  91                 return "TRANSCODER_EDP";
  92         case POWER_DOMAIN_TRANSCODER_DSI_A:
  93                 return "TRANSCODER_DSI_A";
  94         case POWER_DOMAIN_TRANSCODER_DSI_C:
  95                 return "TRANSCODER_DSI_C";
  96         case POWER_DOMAIN_PORT_DDI_A_LANES:
  97                 return "PORT_DDI_A_LANES";
  98         case POWER_DOMAIN_PORT_DDI_B_LANES:
  99                 return "PORT_DDI_B_LANES";
 100         case POWER_DOMAIN_PORT_DDI_C_LANES:
 101                 return "PORT_DDI_C_LANES";
 102         case POWER_DOMAIN_PORT_DDI_D_LANES:
 103                 return "PORT_DDI_D_LANES";
 104         case POWER_DOMAIN_PORT_DDI_E_LANES:
 105                 return "PORT_DDI_E_LANES";
 106         case POWER_DOMAIN_PORT_DSI:
 107                 return "PORT_DSI";
 108         case POWER_DOMAIN_PORT_CRT:
 109                 return "PORT_CRT";
 110         case POWER_DOMAIN_PORT_OTHER:
 111                 return "PORT_OTHER";
 112         case POWER_DOMAIN_VGA:
 113                 return "VGA";
 114         case POWER_DOMAIN_AUDIO:
 115                 return "AUDIO";
 116         case POWER_DOMAIN_PLLS:
 117                 return "PLLS";
 118         case POWER_DOMAIN_AUX_A:
 119                 return "AUX_A";
 120         case POWER_DOMAIN_AUX_B:
 121                 return "AUX_B";
 122         case POWER_DOMAIN_AUX_C:
 123                 return "AUX_C";
 124         case POWER_DOMAIN_AUX_D:
 125                 return "AUX_D";
 126         case POWER_DOMAIN_GMBUS:
 127                 return "GMBUS";
 128         case POWER_DOMAIN_INIT:
 129                 return "INIT";
 130         case POWER_DOMAIN_MODESET:
 131                 return "MODESET";
 132         default:
 133                 MISSING_CASE(domain);
 134                 return "?";
 135         }
 136 }
 137
 138 static void intel_power_well_enable(struct drm_i915_private *dev_priv,
 139                                     struct i915_power_well *power_well)
 140 {
 141         DRM_DEBUG_KMS("enabling %s\n", power_well->name);
 142         power_well->ops->enable(dev_priv, power_well);
 143         power_well->hw_enabled = true;
 144 }
 145
 146 static void intel_power_well_disable(struct drm_i915_private *dev_priv,
 147                                      struct i915_power_well *power_well)
 148 {
 149         DRM_DEBUG_KMS("disabling %s\n", power_well->name);
 150         power_well->hw_enabled = false;
 151         power_well->ops->disable(dev_priv, power_well);
 152 }
 153
 154 /*
 155  * We should only use the power well if we explicitly asked the hardware to
 156  * enable it, so check if it's enabled and also check if we've requested it to
 157  * be enabled.
 158  */
 159 static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
 160                                    struct i915_power_well *power_well)
 161 {
 162         return I915_READ(HSW_PWR_WELL_DRIVER) ==
 163                      (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
 164 }
 165
 166 /**
 167  * __intel_display_power_is_enabled - unlocked check for a power domain
 168  * @dev_priv: i915 device instance
 169  * @domain: power domain to check
 170  *
 171  * This is the unlocked version of intel_display_power_is_enabled() and should
 172  * only be used from error capture and recovery code where deadlocks are
 173  * possible.
 174  *
 175  * Returns:
 176  * True when the power domain is enabled, false otherwise.
 177  */
 178 bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
 179                                       enum intel_display_power_domain domain)
 180 {
 181         struct i915_power_domains *power_domains;
 182         struct i915_power_well *power_well;
 183         bool is_enabled;
 184         int i;
 185
 186         if (dev_priv->pm.suspended)
 187                 return false;
 188
 189         power_domains = &dev_priv->power_domains;
 190
 191         is_enabled = true;
 192
 193         for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
 194                 if (power_well->always_on)
 195                         continue;
 196
 197                 if (!power_well->hw_enabled) {
 198                         is_enabled = false;
 199                         break;
 200                 }
 201         }
 202
 203         return is_enabled;
 204 }
 205
 206 /**
 207  * intel_display_power_is_enabled - check for a power domain
 208  * @dev_priv: i915 device instance
 209  * @domain: power domain to check
 210  *
 211  * This function can be used to check the hw power domain state. It is mostly
 212  * used in hardware state readout functions. Everywhere else code should rely
 213  * upon explicit power domain reference counting to ensure that the hardware
 214  * block is powered up before accessing it.
 215  *
 216  * Callers must hold the relevant modesetting locks to ensure that concurrent
 217  * threads can't disable the power well while the caller tries to read a few
 218  * registers.
 219  *
 220  * Returns:
 221  * True when the power domain is enabled, false otherwise.
 222  */
 223 bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
 224                                     enum intel_display_power_domain domain)
 225 {
 226         struct i915_power_domains *power_domains;
 227         bool ret;
 228
 229         power_domains = &dev_priv->power_domains;
 230
 231         mutex_lock(&power_domains->lock);
 232         ret = __intel_display_power_is_enabled(dev_priv, domain);
 233         mutex_unlock(&power_domains->lock);
 234
 235         return ret;
 236 }
 237
 238 /**
 239  * intel_display_set_init_power - set the initial power domain state
 240  * @dev_priv: i915 device instance
 241  * @enable: whether to enable or disable the initial power domain state
 242  *
 243  * For simplicity our driver load/unload and system suspend/resume code assumes
 244  * that all power domains are always enabled. This functions controls the state
 245  * of this little hack. While the initial power domain state is enabled runtime
 246  * pm is effectively disabled.
 247  */
 248 void intel_display_set_init_power(struct drm_i915_private *dev_priv,
 249                                   bool enable)
 250 {
 251         if (dev_priv->power_domains.init_power_on == enable)
 252                 return;
 253
 254         if (enable)
 255                 intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
 256         else
 257                 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
 258
 259         dev_priv->power_domains.init_power_on = enable;
 260 }
 261
 262 /*
 263  * Starting with Haswell, we have a "Power Down Well" that can be turned off
 264  * when not needed anymore. We have 4 registers that can request the power well
 265  * to be enabled, and it will only be disabled if none of the registers is
 266  * requesting it to be enabled.
 267  */
 268 static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
 269 {
 270         struct drm_device *dev = dev_priv->dev;
 271
 272         /*
 273          * After we re-enable the power well, if we touch VGA register 0x3d5
 274          * we'll get unclaimed register interrupts. This stops after we write
 275          * anything to the VGA MSR register. The vgacon module uses this
 276          * register all the time, so if we unbind our driver and, as a
 277          * consequence, bind vgacon, we'll get stuck in an infinite loop at
 278          * console_unlock(). So make here we touch the VGA MSR register, making
 279          * sure vgacon can keep working normally without triggering interrupts
 280          * and error messages.
 281          */
 282         vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
 283         outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
 284         vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
 285
 286         if (IS_BROADWELL(dev))
 287                 gen8_irq_power_well_post_enable(dev_priv,
 288                                                 1 << PIPE_C | 1 << PIPE_B);
 289 }
 290
 291 static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv)
 292 {
 293         if (IS_BROADWELL(dev_priv))
 294                 gen8_irq_power_well_pre_disable(dev_priv,
 295                                                 1 << PIPE_C | 1 << PIPE_B);
 296 }
 297
 298 static void skl_power_well_post_enable(struct drm_i915_private *dev_priv,
 299                                        struct i915_power_well *power_well)
 300 {
 301         struct drm_device *dev = dev_priv->dev;
 302
 303         /*
 304          * After we re-enable the power well, if we touch VGA register 0x3d5
 305          * we'll get unclaimed register interrupts. This stops after we write
 306          * anything to the VGA MSR register. The vgacon module uses this
 307          * register all the time, so if we unbind our driver and, as a
 308          * consequence, bind vgacon, we'll get stuck in an infinite loop at
 309          * console_unlock(). So make here we touch the VGA MSR register, making
 310          * sure vgacon can keep working normally without triggering interrupts
 311          * and error messages.
 312          */
 313         if (power_well->data == SKL_DISP_PW_2) {
 314                 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
 315                 outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
 316                 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
 317
 318                 gen8_irq_power_well_post_enable(dev_priv,
 319                                                 1 << PIPE_C | 1 << PIPE_B);
 320         }
 321 }
 322
 323 static void skl_power_well_pre_disable(struct drm_i915_private *dev_priv,
 324                                        struct i915_power_well *power_well)
 325 {
 326         if (power_well->data == SKL_DISP_PW_2)
 327                 gen8_irq_power_well_pre_disable(dev_priv,
 328                                                 1 << PIPE_C | 1 << PIPE_B);
 329 }
 330
 331 static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 332                                struct i915_power_well *power_well, bool enable)
 333 {
 334         bool is_enabled, enable_requested;
 335         uint32_t tmp;
 336
 337         tmp = I915_READ(HSW_PWR_WELL_DRIVER);
 338         is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
 339         enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
 340
 341         if (enable) {
 342                 if (!enable_requested)
 343                         I915_WRITE(HSW_PWR_WELL_DRIVER,
 344                                    HSW_PWR_WELL_ENABLE_REQUEST);
 345
 346                 if (!is_enabled) {
 347                         DRM_DEBUG_KMS("Enabling power well\n");
 348                         if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
 349                                       HSW_PWR_WELL_STATE_ENABLED), 20))
 350                                 DRM_ERROR("Timeout enabling power well\n");
 351                         hsw_power_well_post_enable(dev_priv);
 352                 }
 353
 354         } else {
 355                 if (enable_requested) {
 356                         hsw_power_well_pre_disable(dev_priv);
 357                         I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
 358                         POSTING_READ(HSW_PWR_WELL_DRIVER);
 359                         DRM_DEBUG_KMS("Requesting to disable the power well\n");
 360                 }
 361         }
 362 }
 363
 364 #define SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS (         \
 365         BIT(POWER_DOMAIN_TRANSCODER_A) |                \
 366         BIT(POWER_DOMAIN_PIPE_B) |                      \
 367         BIT(POWER_DOMAIN_TRANSCODER_B) |                \
 368         BIT(POWER_DOMAIN_PIPE_C) |                      \
 369         BIT(POWER_DOMAIN_TRANSCODER_C) |                \
 370         BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) |         \
 371         BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) |         \
 372         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |            \
 373         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |            \
 374         BIT(POWER_DOMAIN_PORT_DDI_D_LANES) |            \
 375         BIT(POWER_DOMAIN_PORT_DDI_E_LANES) |            \
 376         BIT(POWER_DOMAIN_AUX_B) |                       \
 377         BIT(POWER_DOMAIN_AUX_C) |                       \
 378         BIT(POWER_DOMAIN_AUX_D) |                       \
 379         BIT(POWER_DOMAIN_AUDIO) |                       \
 380         BIT(POWER_DOMAIN_VGA) |                         \
 381         BIT(POWER_DOMAIN_INIT))
 382 #define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS (             \
 383         BIT(POWER_DOMAIN_PORT_DDI_A_LANES) |            \
 384         BIT(POWER_DOMAIN_PORT_DDI_E_LANES) |            \
 385         BIT(POWER_DOMAIN_INIT))
 386 #define SKL_DISPLAY_DDI_B_POWER_DOMAINS (               \
 387         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |            \
 388         BIT(POWER_DOMAIN_INIT))
 389 #define SKL_DISPLAY_DDI_C_POWER_DOMAINS (               \
 390         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |            \
 391         BIT(POWER_DOMAIN_INIT))
 392 #define SKL_DISPLAY_DDI_D_POWER_DOMAINS (               \
 393         BIT(POWER_DOMAIN_PORT_DDI_D_LANES) |            \
 394         BIT(POWER_DOMAIN_INIT))
 395 #define SKL_DISPLAY_DC_OFF_POWER_DOMAINS (              \
 396         SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS |         \
 397         BIT(POWER_DOMAIN_MODESET) |                     \
 398         BIT(POWER_DOMAIN_AUX_A) |                       \
 399         BIT(POWER_DOMAIN_INIT))
 400 #define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS (           \
 401         (POWER_DOMAIN_MASK & ~(                         \
 402         SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS |         \
 403         SKL_DISPLAY_DC_OFF_POWER_DOMAINS)) |            \
 404         BIT(POWER_DOMAIN_INIT))
 405
 406 #define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS (         \
 407         BIT(POWER_DOMAIN_TRANSCODER_A) |                \
 408         BIT(POWER_DOMAIN_PIPE_B) |                      \
 409         BIT(POWER_DOMAIN_TRANSCODER_B) |                \
 410         BIT(POWER_DOMAIN_PIPE_C) |                      \
 411         BIT(POWER_DOMAIN_TRANSCODER_C) |                \
 412         BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) |         \
 413         BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) |         \
 414         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |            \
 415         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |            \
 416         BIT(POWER_DOMAIN_AUX_B) |                       \
 417         BIT(POWER_DOMAIN_AUX_C) |                       \
 418         BIT(POWER_DOMAIN_AUDIO) |                       \
 419         BIT(POWER_DOMAIN_VGA) |                         \
 420         BIT(POWER_DOMAIN_GMBUS) |                       \
 421         BIT(POWER_DOMAIN_INIT))
 422 #define BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS (         \
 423         BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS |         \
 424         BIT(POWER_DOMAIN_PIPE_A) |                      \
 425         BIT(POWER_DOMAIN_TRANSCODER_EDP) |              \
 426         BIT(POWER_DOMAIN_TRANSCODER_DSI_A) |            \
 427         BIT(POWER_DOMAIN_TRANSCODER_DSI_C) |            \
 428         BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) |         \
 429         BIT(POWER_DOMAIN_PORT_DDI_A_LANES) |            \
 430         BIT(POWER_DOMAIN_PORT_DSI) |                    \
 431         BIT(POWER_DOMAIN_AUX_A) |                       \
 432         BIT(POWER_DOMAIN_PLLS) |                        \
 433         BIT(POWER_DOMAIN_INIT))
 434 #define BXT_DISPLAY_DC_OFF_POWER_DOMAINS (              \
 435         BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS |         \
 436         BIT(POWER_DOMAIN_MODESET) |                     \
 437         BIT(POWER_DOMAIN_AUX_A) |                       \
 438         BIT(POWER_DOMAIN_INIT))
 439 #define BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS (           \
 440         (POWER_DOMAIN_MASK & ~(BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS |  \
 441         BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) |       \
 442         BIT(POWER_DOMAIN_INIT))
 443
 444 static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
 445 {
 446         struct drm_device *dev = dev_priv->dev;
 447
 448         WARN(!IS_BROXTON(dev), "Platform doesn't support DC9.\n");
 449         WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
 450                 "DC9 already programmed to be enabled.\n");
 451         WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
 452                 "DC5 still not disabled to enable DC9.\n");
 453         WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n");
 454         WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
 455
 456          /*
 457           * TODO: check for the following to verify the conditions to enter DC9
 458           * state are satisfied:
 459           * 1] Check relevant display engine registers to verify if mode set
 460           * disable sequence was followed.
 461           * 2] Check if display uninitialize sequence is initialized.
 462           */
 463 }
 464
 465 static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
 466 {
 467         WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
 468         WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
 469                 "DC5 still not disabled.\n");
 470
 471          /*
 472           * TODO: check for the following to verify DC9 state was indeed
 473           * entered before programming to disable it:
 474           * 1] Check relevant display engine registers to verify if mode
 475           *  set disable sequence was followed.
 476           * 2] Check if display uninitialize sequence is initialized.
 477           */
 478 }
 479
 480 static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
 481                                 u32 state)
 482 {
 483         int rewrites = 0;
 484         int rereads = 0;
 485         u32 v;
 486
 487         I915_WRITE(DC_STATE_EN, state);
 488
 489         /* It has been observed that disabling the dc6 state sometimes
 490          * doesn't stick and dmc keeps returning old value. Make sure
 491          * the write really sticks enough times and also force rewrite until
 492          * we are confident that state is exactly what we want.
 493          */
 494         do  {
 495                 v = I915_READ(DC_STATE_EN);
 496
 497                 if (v != state) {
 498                         I915_WRITE(DC_STATE_EN, state);
 499                         rewrites++;
 500                         rereads = 0;
 501                 } else if (rereads++ > 5) {
 502                         break;
 503                 }
 504
 505         } while (rewrites < 100);
 506
 507         if (v != state)
 508                 DRM_ERROR("Writing dc state to 0x%x failed, now 0x%x\n",
 509                           state, v);
 510
 511         /* Most of the times we need one retry, avoid spam */
 512         if (rewrites > 1)
 513                 DRM_DEBUG_KMS("Rewrote dc state to 0x%x %d times\n",
 514                               state, rewrites);
 515 }
 516
 517 static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
 518 {
 519         uint32_t val;
 520         uint32_t mask;
 521
 522         mask = DC_STATE_EN_UPTO_DC5;
 523         if (IS_BROXTON(dev_priv))
 524                 mask |= DC_STATE_EN_DC9;
 525         else
 526                 mask |= DC_STATE_EN_UPTO_DC6;
 527
 528         if (WARN_ON_ONCE(state & ~dev_priv->csr.allowed_dc_mask))
 529                 state &= dev_priv->csr.allowed_dc_mask;
 530
 531         val = I915_READ(DC_STATE_EN);
 532         DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
 533                       val & mask, state);
 534
 535         /* Check if DMC is ignoring our DC state requests */
 536         if ((val & mask) != dev_priv->csr.dc_state)
 537                 DRM_ERROR("DC state mismatch (0x%x -> 0x%x)\n",
 538                           dev_priv->csr.dc_state, val & mask);
 539
 540         val &= ~mask;
 541         val |= state;
 542
 543         gen9_write_dc_state(dev_priv, val);
 544
 545         dev_priv->csr.dc_state = val & mask;
 546 }
 547
 548 void bxt_enable_dc9(struct drm_i915_private *dev_priv)
 549 {
 550         assert_can_enable_dc9(dev_priv);
 551
 552         DRM_DEBUG_KMS("Enabling DC9\n");
 553
 554         gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
 555 }
 556
 557 void bxt_disable_dc9(struct drm_i915_private *dev_priv)
 558 {
 559         assert_can_disable_dc9(dev_priv);
 560
 561         DRM_DEBUG_KMS("Disabling DC9\n");
 562
 563         gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 564 }
 565
 566 static void assert_csr_loaded(struct drm_i915_private *dev_priv)
 567 {
 568         WARN_ONCE(!I915_READ(CSR_PROGRAM(0)),
 569                   "CSR program storage start is NULL\n");
 570         WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n");
 571         WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n");
 572 }
 573
 574 static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
 575 {
 576         struct drm_device *dev = dev_priv->dev;
 577         bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv,
 578                                         SKL_DISP_PW_2);
 579
 580         WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev),
 581                   "Platform doesn't support DC5.\n");
 582         WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
 583         WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n");
 584
 585         WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5),
 586                   "DC5 already programmed to be enabled.\n");
 587         assert_rpm_wakelock_held(dev_priv);
 588
 589         assert_csr_loaded(dev_priv);
 590 }
 591
 592 static void gen9_enable_dc5(struct drm_i915_private *dev_priv)
 593 {
 594         assert_can_enable_dc5(dev_priv);
 595
 596         DRM_DEBUG_KMS("Enabling DC5\n");
 597
 598         gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
 599 }
 600
 601 static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
 602 {
 603         struct drm_device *dev = dev_priv->dev;
 604
 605         WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev),
 606                   "Platform doesn't support DC6.\n");
 607         WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n");
 608         WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
 609                   "Backlight is not disabled.\n");
 610         WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6),
 611                   "DC6 already programmed to be enabled.\n");
 612
 613         assert_csr_loaded(dev_priv);
 614 }
 615
 616 void skl_enable_dc6(struct drm_i915_private *dev_priv)
 617 {
 618         assert_can_enable_dc6(dev_priv);
 619
 620         DRM_DEBUG_KMS("Enabling DC6\n");
 621
 622         gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
 623
 624 }
 625
 626 void skl_disable_dc6(struct drm_i915_private *dev_priv)
 627 {
 628         DRM_DEBUG_KMS("Disabling DC6\n");
 629
 630         gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 631 }
 632
 633 static void skl_set_power_well(struct drm_i915_private *dev_priv,
 634                         struct i915_power_well *power_well, bool enable)
 635 {
 636         uint32_t tmp, fuse_status;
 637         uint32_t req_mask, state_mask;
 638         bool is_enabled, enable_requested, check_fuse_status = false;
 639
 640         tmp = I915_READ(HSW_PWR_WELL_DRIVER);
 641         fuse_status = I915_READ(SKL_FUSE_STATUS);
 642
 643         switch (power_well->data) {
 644         case SKL_DISP_PW_1:
 645                 if (wait_for((I915_READ(SKL_FUSE_STATUS) &
 646                         SKL_FUSE_PG0_DIST_STATUS), 1)) {
 647                         DRM_ERROR("PG0 not enabled\n");
 648                         return;
 649                 }
 650                 break;
 651         case SKL_DISP_PW_2:
 652                 if (!(fuse_status & SKL_FUSE_PG1_DIST_STATUS)) {
 653                         DRM_ERROR("PG1 in disabled state\n");
 654                         return;
 655                 }
 656                 break;
 657         case SKL_DISP_PW_DDI_A_E:
 658         case SKL_DISP_PW_DDI_B:
 659         case SKL_DISP_PW_DDI_C:
 660         case SKL_DISP_PW_DDI_D:
 661         case SKL_DISP_PW_MISC_IO:
 662                 break;
 663         default:
 664                 WARN(1, "Unknown power well %lu\n", power_well->data);
 665                 return;
 666         }
 667
 668         req_mask = SKL_POWER_WELL_REQ(power_well->data);
 669         enable_requested = tmp & req_mask;
 670         state_mask = SKL_POWER_WELL_STATE(power_well->data);
 671         is_enabled = tmp & state_mask;
 672
 673         if (!enable && enable_requested)
 674                 skl_power_well_pre_disable(dev_priv, power_well);
 675
 676         if (enable) {
 677                 if (!enable_requested) {
 678                         WARN((tmp & state_mask) &&
 679                                 !I915_READ(HSW_PWR_WELL_BIOS),
 680                                 "Invalid for power well status to be enabled, unless done by the BIOS, \
 681                                 when request is to disable!\n");
 682                         I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
 683                 }
 684
 685                 if (!is_enabled) {
 686                         DRM_DEBUG_KMS("Enabling %s\n", power_well->name);
 687                         if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
 688                                 state_mask), 1))
 689                                 DRM_ERROR("%s enable timeout\n",
 690                                         power_well->name);
 691                         check_fuse_status = true;
 692                 }
 693         } else {
 694                 if (enable_requested) {
 695                         I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask);
 696                         POSTING_READ(HSW_PWR_WELL_DRIVER);
 697                         DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
 698                 }
 699         }
 700
 701         if (check_fuse_status) {
 702                 if (power_well->data == SKL_DISP_PW_1) {
 703                         if (wait_for((I915_READ(SKL_FUSE_STATUS) &
 704                                 SKL_FUSE_PG1_DIST_STATUS), 1))
 705                                 DRM_ERROR("PG1 distributing status timeout\n");
 706                 } else if (power_well->data == SKL_DISP_PW_2) {
 707                         if (wait_for((I915_READ(SKL_FUSE_STATUS) &
 708                                 SKL_FUSE_PG2_DIST_STATUS), 1))
 709                                 DRM_ERROR("PG2 distributing status timeout\n");
 710                 }
 711         }
 712
 713         if (enable && !is_enabled)
 714                 skl_power_well_post_enable(dev_priv, power_well);
 715 }
 716
 717 static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
 718                                    struct i915_power_well *power_well)
 719 {
 720         hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
 721
 722         /*
 723          * We're taking over the BIOS, so clear any requests made by it since
 724          * the driver is in charge now.
 725          */
 726         if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
 727                 I915_WRITE(HSW_PWR_WELL_BIOS, 0);
 728 }
 729
 730 static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
 731                                   struct i915_power_well *power_well)
 732 {
 733         hsw_set_power_well(dev_priv, power_well, true);
 734 }
 735
 736 static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
 737                                    struct i915_power_well *power_well)
 738 {
 739         hsw_set_power_well(dev_priv, power_well, false);
 740 }
 741
 742 static bool skl_power_well_enabled(struct drm_i915_private *dev_priv,
 743                                         struct i915_power_well *power_well)
 744 {
 745         uint32_t mask = SKL_POWER_WELL_REQ(power_well->data) |
 746                 SKL_POWER_WELL_STATE(power_well->data);
 747
 748         return (I915_READ(HSW_PWR_WELL_DRIVER) & mask) == mask;
 749 }
 750
 751 static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv,
 752                                 struct i915_power_well *power_well)
 753 {
 754         skl_set_power_well(dev_priv, power_well, power_well->count > 0);
 755
 756         /* Clear any request made by BIOS as driver is taking over */
 757         I915_WRITE(HSW_PWR_WELL_BIOS, 0);
 758 }
 759
 760 static void skl_power_well_enable(struct drm_i915_private *dev_priv,
 761                                 struct i915_power_well *power_well)
 762 {
 763         skl_set_power_well(dev_priv, power_well, true);
 764 }
 765
 766 static void skl_power_well_disable(struct drm_i915_private *dev_priv,
 767                                 struct i915_power_well *power_well)
 768 {
 769         skl_set_power_well(dev_priv, power_well, false);
 770 }
 771
 772 static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
 773                                            struct i915_power_well *power_well)
 774 {
 775         return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0;
 776 }
 777
 778 static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
 779                                           struct i915_power_well *power_well)
 780 {
 781         gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 782 }
 783
 784 static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
 785                                            struct i915_power_well *power_well)
 786 {
 787         if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC6)
 788                 skl_enable_dc6(dev_priv);
 789         else if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5)
 790                 gen9_enable_dc5(dev_priv);
 791 }
 792
 793 static void gen9_dc_off_power_well_sync_hw(struct drm_i915_private *dev_priv,
 794                                            struct i915_power_well *power_well)
 795 {
 796         if (power_well->count > 0)
 797                 gen9_dc_off_power_well_enable(dev_priv, power_well);
 798         else
 799                 gen9_dc_off_power_well_disable(dev_priv, power_well);
 800 }
 801
 802 static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
 803                                            struct i915_power_well *power_well)
 804 {
 805 }
 806
 807 static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
 808                                              struct i915_power_well *power_well)
 809 {
 810         return true;
 811 }
 812
 813 static void vlv_set_power_well(struct drm_i915_private *dev_priv,
 814                                struct i915_power_well *power_well, bool enable)
 815 {
 816         enum punit_power_well power_well_id = power_well->data;
 817         u32 mask;
 818         u32 state;
 819         u32 ctrl;
 820
 821         mask = PUNIT_PWRGT_MASK(power_well_id);
 822         state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
 823                          PUNIT_PWRGT_PWR_GATE(power_well_id);
 824
 825         mutex_lock(&dev_priv->rps.hw_lock);
 826
 827 #define COND \
 828         ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
 829
 830         if (COND)
 831                 goto out;
 832
 833         ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
 834         ctrl &= ~mask;
 835         ctrl |= state;
 836         vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
 837
 838         if (wait_for(COND, 100))
 839                 DRM_ERROR("timeout setting power well state %08x (%08x)\n",
 840                           state,
 841                           vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
 842
 843 #undef COND
 844
 845 out:
 846         mutex_unlock(&dev_priv->rps.hw_lock);
 847 }
 848
 849 static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
 850                                    struct i915_power_well *power_well)
 851 {
 852         vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
 853 }
 854
 855 static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
 856                                   struct i915_power_well *power_well)
 857 {
 858         vlv_set_power_well(dev_priv, power_well, true);
 859 }
 860
 861 static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
 862                                    struct i915_power_well *power_well)
 863 {
 864         vlv_set_power_well(dev_priv, power_well, false);
 865 }
 866
 867 static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
 868                                    struct i915_power_well *power_well)
 869 {
 870         int power_well_id = power_well->data;
 871         bool enabled = false;
 872         u32 mask;
 873         u32 state;
 874         u32 ctrl;
 875
 876         mask = PUNIT_PWRGT_MASK(power_well_id);
 877         ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
 878
 879         mutex_lock(&dev_priv->rps.hw_lock);
 880
 881         state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
 882         /*
 883          * We only ever set the power-on and power-gate states, anything
 884          * else is unexpected.
 885          */
 886         WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
 887                 state != PUNIT_PWRGT_PWR_GATE(power_well_id));
 888         if (state == ctrl)
 889                 enabled = true;
 890
 891         /*
 892          * A transient state at this point would mean some unexpected party
 893          * is poking at the power controls too.
 894          */
 895         ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
 896         WARN_ON(ctrl != state);
 897
 898         mutex_unlock(&dev_priv->rps.hw_lock);
 899
 900         return enabled;
 901 }
 902
 903 static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 904 {
 905         enum pipe pipe;
 906
 907         /*
 908          * Enable the CRI clock source so we can get at the
 909          * display and the reference clock for VGA
 910          * hotplug / manual detection. Supposedly DSI also
 911          * needs the ref clock up and running.
 912          *
 913          * CHV DPLL B/C have some issues if VGA mode is enabled.
 914          */
 915         for_each_pipe(dev_priv->dev, pipe) {
 916                 u32 val = I915_READ(DPLL(pipe));
 917
 918                 val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
 919                 if (pipe != PIPE_A)
 920                         val |= DPLL_INTEGRATED_CRI_CLK_VLV;
 921
 922                 I915_WRITE(DPLL(pipe), val);
 923         }
 924
 925         spin_lock_irq(&dev_priv->irq_lock);
 926         valleyview_enable_display_irqs(dev_priv);
 927         spin_unlock_irq(&dev_priv->irq_lock);
 928
 929         /*
 930          * During driver initialization/resume we can avoid restoring the
 931          * part of the HW/SW state that will be inited anyway explicitly.
 932          */
 933         if (dev_priv->power_domains.initializing)
 934                 return;
 935
 936         intel_hpd_init(dev_priv);
 937
 938         i915_redisable_vga_power_on(dev_priv->dev);
 939 }
 940
 941 static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
 942 {
 943         spin_lock_irq(&dev_priv->irq_lock);
 944         valleyview_disable_display_irqs(dev_priv);
 945         spin_unlock_irq(&dev_priv->irq_lock);
 946
 947         /* make sure we're done processing display irqs */
 948         synchronize_irq(dev_priv->dev->irq);
 949
 950         vlv_power_sequencer_reset(dev_priv);
 951 }
 952
 953 static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
 954                                           struct i915_power_well *power_well)
 955 {
 956         WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
 957
 958         vlv_set_power_well(dev_priv, power_well, true);
 959
 960         vlv_display_power_well_init(dev_priv);
 961 }
 962
 963 static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
 964                                            struct i915_power_well *power_well)
 965 {
 966         WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
 967
 968         vlv_display_power_well_deinit(dev_priv);
 969
 970         vlv_set_power_well(dev_priv, power_well, false);
 971 }
 972
 973 static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
 974                                            struct i915_power_well *power_well)
 975 {
 976         WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
 977
 978         /* since ref/cri clock was enabled */
 979         udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
 980
 981         vlv_set_power_well(dev_priv, power_well, true);
 982
 983         /*
 984          * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
 985          *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.
 986          *   a. GUnit 0x2110 bit[0] set to 1 (def 0)
 987          *   b. The other bits such as sfr settings / modesel may all
 988          *      be set to 0.
 989          *
 990          * This should only be done on init and resume from S3 with
 991          * both PLLs disabled, or we risk losing DPIO and PLL
 992          * synchronization.
 993          */
 994         I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
 995 }
 996
 997 static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
 998                                             struct i915_power_well *power_well)
 999 {
1000         enum pipe pipe;
1001
1002         WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
1003
1004         for_each_pipe(dev_priv, pipe)
1005                 assert_pll_disabled(dev_priv, pipe);
1006
1007         /* Assert common reset */
1008         I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
1009
1010         vlv_set_power_well(dev_priv, power_well, false);
1011 }
1012
1013 #define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
1014
1015 static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
1016                                                  int power_well_id)
1017 {
1018         struct i915_power_domains *power_domains = &dev_priv->power_domains;
1019         int i;
1020
1021         for (i = 0; i < power_domains->power_well_count; i++) {
1022                 struct i915_power_well *power_well;
1023
1024                 power_well = &power_domains->power_wells[i];
1025                 if (power_well->data == power_well_id)
1026                         return power_well;
1027         }
1028
1029         return NULL;
1030 }
1031
1032 #define BITS_SET(val, bits) (((val) & (bits)) == (bits))
1033
1034 static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
1035 {
1036         struct i915_power_well *cmn_bc =
1037                 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
1038         struct i915_power_well *cmn_d =
1039                 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
1040         u32 phy_control = dev_priv->chv_phy_control;
1041         u32 phy_status = 0;
1042         u32 phy_status_mask = 0xffffffff;
1043         u32 tmp;
1044
1045         /*
1046          * The BIOS can leave the PHY is some weird state
1047          * where it doesn't fully power down some parts.
1048          * Disable the asserts until the PHY has been fully
1049          * reset (ie. the power well has been disabled at
1050          * least once).
1051          */
1052         if (!dev_priv->chv_phy_assert[DPIO_PHY0])
1053                 phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) |
1054                                      PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) |
1055                                      PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) |
1056                                      PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) |
1057                                      PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) |
1058                                      PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1));
1059
1060         if (!dev_priv->chv_phy_assert[DPIO_PHY1])
1061                 phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) |
1062                                      PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) |
1063                                      PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1));
1064
1065         if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
1066                 phy_status |= PHY_POWERGOOD(DPIO_PHY0);
1067
1068                 /* this assumes override is only used to enable lanes */
1069                 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0)
1070                         phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0);
1071
1072                 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0)
1073                         phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1);
1074
1075                 /* CL1 is on whenever anything is on in either channel */
1076                 if (BITS_SET(phy_control,
1077                              PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) |
1078                              PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)))
1079                         phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0);
1080
1081                 /*
1082                  * The DPLLB check accounts for the pipe B + port A usage
1083                  * with CL2 powered up but all the lanes in the second channel
1084                  * powered down.
1085                  */
1086                 if (BITS_SET(phy_control,
1087                              PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
1088                     (I915_READ(DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
1089                         phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
1090
1091                 if (BITS_SET(phy_control,
1092                              PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0)))
1093                         phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0);
1094                 if (BITS_SET(phy_control,
1095                              PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0)))
1096                         phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1);
1097
1098                 if (BITS_SET(phy_control,
1099                              PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1)))
1100                         phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0);
1101                 if (BITS_SET(phy_control,
1102                              PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1)))
1103                         phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1);
1104         }
1105
1106         if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
1107                 phy_status |= PHY_POWERGOOD(DPIO_PHY1);
1108
1109                 /* this assumes override is only used to enable lanes */
1110                 if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0)
1111                         phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0);
1112
1113                 if (BITS_SET(phy_control,
1114                              PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0)))
1115                         phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0);
1116
1117                 if (BITS_SET(phy_control,
1118                              PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0)))
1119                         phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0);
1120                 if (BITS_SET(phy_control,
1121                              PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0)))
1122                         phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1);
1123         }
1124
1125         phy_status &= phy_status_mask;
1126
1127         /*
1128          * The PHY may be busy with some initial calibration and whatnot,
1129          * so the power state can take a while to actually change.
1130          */
1131         if (wait_for((tmp = I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask) == phy_status, 10))
1132                 WARN(phy_status != tmp,
1133                      "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
1134                      tmp, phy_status, dev_priv->chv_phy_control);
1135 }
1136
1137 #undef BITS_SET
1138
1139 static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
1140                                            struct i915_power_well *power_well)
1141 {
1142         enum dpio_phy phy;
1143         enum pipe pipe;
1144         uint32_t tmp;
1145
1146         WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
1147                      power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
1148
1149         if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
1150                 pipe = PIPE_A;
1151                 phy = DPIO_PHY0;
1152         } else {
1153                 pipe = PIPE_C;
1154                 phy = DPIO_PHY1;
1155         }
1156
1157         /* since ref/cri clock was enabled */
1158         udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
1159         vlv_set_power_well(dev_priv, power_well, true);
1160
1161         /* Poll for phypwrgood signal */
1162         if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
1163                 DRM_ERROR("Display PHY %d is not power up\n", phy);
1164
1165         mutex_lock(&dev_priv->sb_lock);
1166
1167         /* Enable dynamic power down */
1168         tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28);
1169         tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN |
1170                 DPIO_SUS_CLK_CONFIG_GATE_CLKREQ;
1171         vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp);
1172
1173         if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
1174                 tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1);
1175                 tmp |= DPIO_DYNPWRDOWNEN_CH1;
1176                 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp);
1177         } else {
1178                 /*
1179                  * Force the non-existing CL2 off. BXT does this
1180                  * too, so maybe it saves some power even though
1181                  * CL2 doesn't exist?
1182                  */
1183                 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
1184                 tmp |= DPIO_CL2_LDOFUSE_PWRENB;
1185                 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp);
1186         }
1187
1188         mutex_unlock(&dev_priv->sb_lock);
1189
1190         dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy);
1191         I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1192
1193         DRM_DEBUG_KMS("Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
1194                       phy, dev_priv->chv_phy_control);
1195
1196         assert_chv_phy_status(dev_priv);
1197 }
1198
1199 static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
1200                                             struct i915_power_well *power_well)
1201 {
1202         enum dpio_phy phy;
1203
1204         WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
1205                      power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
1206
1207         if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
1208                 phy = DPIO_PHY0;
1209                 assert_pll_disabled(dev_priv, PIPE_A);
1210                 assert_pll_disabled(dev_priv, PIPE_B);
1211         } else {
1212                 phy = DPIO_PHY1;
1213                 assert_pll_disabled(dev_priv, PIPE_C);
1214         }
1215
1216         dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy);
1217         I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1218
1219         vlv_set_power_well(dev_priv, power_well, false);
1220
1221         DRM_DEBUG_KMS("Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
1222                       phy, dev_priv->chv_phy_control);
1223
1224         /* PHY is fully reset now, so we can enable the PHY state asserts */
1225         dev_priv->chv_phy_assert[phy] = true;
1226
1227         assert_chv_phy_status(dev_priv);
1228 }
1229
1230 static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy,
1231                                      enum dpio_channel ch, bool override, unsigned int mask)
1232 {
1233         enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C;
1234         u32 reg, val, expected, actual;
1235
1236         /*
1237          * The BIOS can leave the PHY is some weird state
1238          * where it doesn't fully power down some parts.
1239          * Disable the asserts until the PHY has been fully
1240          * reset (ie. the power well has been disabled at
1241          * least once).
1242          */
1243         if (!dev_priv->chv_phy_assert[phy])
1244                 return;
1245
1246         if (ch == DPIO_CH0)
1247                 reg = _CHV_CMN_DW0_CH0;
1248         else
1249                 reg = _CHV_CMN_DW6_CH1;
1250
1251         mutex_lock(&dev_priv->sb_lock);
1252         val = vlv_dpio_read(dev_priv, pipe, reg);
1253         mutex_unlock(&dev_priv->sb_lock);
1254
1255         /*
1256          * This assumes !override is only used when the port is disabled.
1257          * All lanes should power down even without the override when
1258          * the port is disabled.
1259          */
1260         if (!override || mask == 0xf) {
1261                 expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
1262                 /*
1263                  * If CH1 common lane is not active anymore
1264                  * (eg. for pipe B DPLL) the entire channel will
1265                  * shut down, which causes the common lane registers
1266                  * to read as 0. That means we can't actually check
1267                  * the lane power down status bits, but as the entire
1268                  * register reads as 0 it's a good indication that the
1269                  * channel is indeed entirely powered down.
1270                  */
1271                 if (ch == DPIO_CH1 && val == 0)
1272                         expected = 0;
1273         } else if (mask != 0x0) {
1274                 expected = DPIO_ANYDL_POWERDOWN;
1275         } else {
1276                 expected = 0;
1277         }
1278
1279         if (ch == DPIO_CH0)
1280                 actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0;
1281         else
1282                 actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1;
1283         actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
1284
1285         WARN(actual != expected,
1286              "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n",
1287              !!(actual & DPIO_ALLDL_POWERDOWN), !!(actual & DPIO_ANYDL_POWERDOWN),
1288              !!(expected & DPIO_ALLDL_POWERDOWN), !!(expected & DPIO_ANYDL_POWERDOWN),
1289              reg, val);
1290 }
1291
1292 bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
1293                           enum dpio_channel ch, bool override)
1294 {
1295         struct i915_power_domains *power_domains = &dev_priv->power_domains;
1296         bool was_override;
1297
1298         mutex_lock(&power_domains->lock);
1299
1300         was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1301
1302         if (override == was_override)
1303                 goto out;
1304
1305         if (override)
1306                 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1307         else
1308                 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1309
1310         I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1311
1312         DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
1313                       phy, ch, dev_priv->chv_phy_control);
1314
1315         assert_chv_phy_status(dev_priv);
1316
1317 out:
1318         mutex_unlock(&power_domains->lock);
1319
1320         return was_override;
1321 }
1322
1323 void chv_phy_powergate_lanes(struct intel_encoder *encoder,
1324                              bool override, unsigned int mask)
1325 {
1326         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
1327         struct i915_power_domains *power_domains = &dev_priv->power_domains;
1328         enum dpio_phy phy = vlv_dport_to_phy(enc_to_dig_port(&encoder->base));
1329         enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
1330
1331         mutex_lock(&power_domains->lock);
1332
1333         dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch);
1334         dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch);
1335
1336         if (override)
1337                 dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1338         else
1339                 dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
1340
1341         I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
1342
1343         DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n",
1344                       phy, ch, mask, dev_priv->chv_phy_control);
1345
1346         assert_chv_phy_status(dev_priv);
1347
1348         assert_chv_phy_powergate(dev_priv, phy, ch, override, mask);
1349
1350         mutex_unlock(&power_domains->lock);
1351 }
1352
1353 static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
1354                                         struct i915_power_well *power_well)
1355 {
1356         enum pipe pipe = power_well->data;
1357         bool enabled;
1358         u32 state, ctrl;
1359
1360         mutex_lock(&dev_priv->rps.hw_lock);
1361
1362         state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
1363         /*
1364          * We only ever set the power-on and power-gate states, anything
1365          * else is unexpected.
1366          */
1367         WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
1368         enabled = state == DP_SSS_PWR_ON(pipe);
1369
1370         /*
1371          * A transient state at this point would mean some unexpected party
1372          * is poking at the power controls too.
1373          */
1374         ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
1375         WARN_ON(ctrl << 16 != state);
1376
1377         mutex_unlock(&dev_priv->rps.hw_lock);
1378
1379         return enabled;
1380 }
1381
1382 static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
1383                                     struct i915_power_well *power_well,
1384                                     bool enable)
1385 {
1386         enum pipe pipe = power_well->data;
1387         u32 state;
1388         u32 ctrl;
1389
1390         state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
1391
1392         mutex_lock(&dev_priv->rps.hw_lock);
1393
1394 #define COND \
1395         ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
1396
1397         if (COND)
1398                 goto out;
1399
1400         ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
1401         ctrl &= ~DP_SSC_MASK(pipe);
1402         ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
1403         vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
1404
1405         if (wait_for(COND, 100))
1406                 DRM_ERROR("timeout setting power well state %08x (%08x)\n",
1407                           state,
1408                           vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
1409
1410 #undef COND
1411
1412 out:
1413         mutex_unlock(&dev_priv->rps.hw_lock);
1414 }
1415
1416 static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
1417                                         struct i915_power_well *power_well)
1418 {
1419         WARN_ON_ONCE(power_well->data != PIPE_A);
1420
1421         chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
1422 }
1423
1424 static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
1425                                        struct i915_power_well *power_well)
1426 {
1427         WARN_ON_ONCE(power_well->data != PIPE_A);
1428
1429         chv_set_pipe_power_well(dev_priv, power_well, true);
1430
1431         vlv_display_power_well_init(dev_priv);
1432 }
1433
1434 static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
1435                                         struct i915_power_well *power_well)
1436 {
1437         WARN_ON_ONCE(power_well->data != PIPE_A);
1438
1439         vlv_display_power_well_deinit(dev_priv);
1440
1441         chv_set_pipe_power_well(dev_priv, power_well, false);
1442 }
1443
1444 static void
1445 __intel_display_power_get_domain(struct drm_i915_private *dev_priv,
1446                                  enum intel_display_power_domain domain)
1447 {
1448         struct i915_power_domains *power_domains = &dev_priv->power_domains;
1449         struct i915_power_well *power_well;
1450         int i;
1451
1452         for_each_power_well(i, power_well, BIT(domain), power_domains) {
1453                 if (!power_well->count++)
1454                         intel_power_well_enable(dev_priv, power_well);
1455         }
1456
1457         power_domains->domain_use_count[domain]++;
1458 }
1459
1460 /**
1461  * intel_display_power_get - grab a power domain reference
1462  * @dev_priv: i915 device instance
1463  * @domain: power domain to reference
1464  *
1465  * This function grabs a power domain reference for @domain and ensures that the
1466  * power domain and all its parents are powered up. Therefore users should only
1467  * grab a reference to the innermost power domain they need.
1468  *
1469  * Any power domain reference obtained by this function must have a symmetric
1470  * call to intel_display_power_put() to release the reference again.
1471  */
1472 void intel_display_power_get(struct drm_i915_private *dev_priv,
1473                              enum intel_display_power_domain domain)
1474 {
1475         struct i915_power_domains *power_domains = &dev_priv->power_domains;
1476
1477         intel_runtime_pm_get(dev_priv);
1478
1479         mutex_lock(&power_domains->lock);
1480
1481         __intel_display_power_get_domain(dev_priv, domain);
1482
1483         mutex_unlock(&power_domains->lock);
1484 }
1485
1486 /**
1487  * intel_display_power_get_if_enabled - grab a reference for an enabled display power domain
1488  * @dev_priv: i915 device instance
1489  * @domain: power domain to reference
1490  *
1491  * This function grabs a power domain reference for @domain and ensures that the
1492  * power domain and all its parents are powered up. Therefore users should only
1493  * grab a reference to the innermost power domain they need.
1494  *
1495  * Any power domain reference obtained by this function must have a symmetric
1496  * call to intel_display_power_put() to release the reference again.
1497  */
1498 bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv,
1499                                         enum intel_display_power_domain domain)
1500 {
1501         struct i915_power_domains *power_domains = &dev_priv->power_domains;
1502         bool is_enabled;
1503
1504         if (!intel_runtime_pm_get_if_in_use(dev_priv))
1505                 return false;
1506
1507         mutex_lock(&power_domains->lock);
1508
1509         if (__intel_display_power_is_enabled(dev_priv, domain)) {
1510                 __intel_display_power_get_domain(dev_priv, domain);
1511                 is_enabled = true;
1512         } else {
1513                 is_enabled = false;
1514         }
1515
1516         mutex_unlock(&power_domains->lock);
1517
1518         if (!is_enabled)
1519                 intel_runtime_pm_put(dev_priv);
1520
1521         return is_enabled;
1522 }
1523
1524 /**
1525  * intel_display_power_put - release a power domain reference
1526  * @dev_priv: i915 device instance
1527  * @domain: power domain to reference
1528  *
1529  * This function drops the power domain reference obtained by
1530  * intel_display_power_get() and might power down the corresponding hardware
1531  * block right away if this is the last reference.
1532  */
1533 void intel_display_power_put(struct drm_i915_private *dev_priv,
1534                              enum intel_display_power_domain domain)
1535 {
1536         struct i915_power_domains *power_domains;
1537         struct i915_power_well *power_well;
1538         int i;
1539
1540         power_domains = &dev_priv->power_domains;
1541
1542         mutex_lock(&power_domains->lock);
1543
1544         WARN(!power_domains->domain_use_count[domain],
1545              "Use count on domain %s is already zero\n",
1546              intel_display_power_domain_str(domain));
1547         power_domains->domain_use_count[domain]--;
1548
1549         for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
1550                 WARN(!power_well->count,
1551                      "Use count on power well %s is already zero",
1552                      power_well->name);
1553
1554                 if (!--power_well->count)
1555                         intel_power_well_disable(dev_priv, power_well);
1556         }
1557
1558         mutex_unlock(&power_domains->lock);
1559
1560         intel_runtime_pm_put(dev_priv);
1561 }
1562
1563 #define HSW_ALWAYS_ON_POWER_DOMAINS (                   \
1564         BIT(POWER_DOMAIN_PIPE_A) |                      \
1565         BIT(POWER_DOMAIN_TRANSCODER_EDP) |              \
1566         BIT(POWER_DOMAIN_PORT_DDI_A_LANES) |            \
1567         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |            \
1568         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |            \
1569         BIT(POWER_DOMAIN_PORT_DDI_D_LANES) |            \
1570         BIT(POWER_DOMAIN_PORT_CRT) |                    \
1571         BIT(POWER_DOMAIN_PLLS) |                        \
1572         BIT(POWER_DOMAIN_AUX_A) |                       \
1573         BIT(POWER_DOMAIN_AUX_B) |                       \
1574         BIT(POWER_DOMAIN_AUX_C) |                       \
1575         BIT(POWER_DOMAIN_AUX_D) |                       \
1576         BIT(POWER_DOMAIN_GMBUS) |                       \
1577         BIT(POWER_DOMAIN_INIT))
1578 #define HSW_DISPLAY_POWER_DOMAINS (                             \
1579         (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |    \
1580         BIT(POWER_DOMAIN_INIT))
1581
1582 #define BDW_ALWAYS_ON_POWER_DOMAINS (                   \
1583         HSW_ALWAYS_ON_POWER_DOMAINS |                   \
1584         BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
1585 #define BDW_DISPLAY_POWER_DOMAINS (                             \
1586         (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) |    \
1587         BIT(POWER_DOMAIN_INIT))
1588
1589 #define VLV_ALWAYS_ON_POWER_DOMAINS     BIT(POWER_DOMAIN_INIT)
1590 #define VLV_DISPLAY_POWER_DOMAINS       POWER_DOMAIN_MASK
1591
1592 #define VLV_DPIO_CMN_BC_POWER_DOMAINS (         \
1593         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |    \
1594         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |    \
1595         BIT(POWER_DOMAIN_PORT_CRT) |            \
1596         BIT(POWER_DOMAIN_AUX_B) |               \
1597         BIT(POWER_DOMAIN_AUX_C) |               \
1598         BIT(POWER_DOMAIN_INIT))
1599
1600 #define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS (  \
1601         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |    \
1602         BIT(POWER_DOMAIN_AUX_B) |               \
1603         BIT(POWER_DOMAIN_INIT))
1604
1605 #define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS (  \
1606         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |    \
1607         BIT(POWER_DOMAIN_AUX_B) |               \
1608         BIT(POWER_DOMAIN_INIT))
1609
1610 #define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS (  \
1611         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |    \
1612         BIT(POWER_DOMAIN_AUX_C) |               \
1613         BIT(POWER_DOMAIN_INIT))
1614
1615 #define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS (  \
1616         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |    \
1617         BIT(POWER_DOMAIN_AUX_C) |               \
1618         BIT(POWER_DOMAIN_INIT))
1619
1620 #define CHV_DPIO_CMN_BC_POWER_DOMAINS (         \
1621         BIT(POWER_DOMAIN_PORT_DDI_B_LANES) |    \
1622         BIT(POWER_DOMAIN_PORT_DDI_C_LANES) |    \
1623         BIT(POWER_DOMAIN_AUX_B) |               \
1624         BIT(POWER_DOMAIN_AUX_C) |               \
1625         BIT(POWER_DOMAIN_INIT))
1626
1627 #define CHV_DPIO_CMN_D_POWER_DOMAINS (          \
1628         BIT(POWER_DOMAIN_PORT_DDI_D_LANES) |    \
1629         BIT(POWER_DOMAIN_AUX_D) |               \
1630         BIT(POWER_DOMAIN_INIT))
1631
1632 static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
1633         .sync_hw = i9xx_always_on_power_well_noop,
1634         .enable = i9xx_always_on_power_well_noop,
1635         .disable = i9xx_always_on_power_well_noop,
1636         .is_enabled = i9xx_always_on_power_well_enabled,
1637 };
1638
1639 static const struct i915_power_well_ops chv_pipe_power_well_ops = {
1640         .sync_hw = chv_pipe_power_well_sync_hw,
1641         .enable = chv_pipe_power_well_enable,
1642         .disable = chv_pipe_power_well_disable,
1643         .is_enabled = chv_pipe_power_well_enabled,
1644 };
1645
1646 static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
1647         .sync_hw = vlv_power_well_sync_hw,
1648         .enable = chv_dpio_cmn_power_well_enable,
1649         .disable = chv_dpio_cmn_power_well_disable,
1650         .is_enabled = vlv_power_well_enabled,
1651 };
1652
1653 static struct i915_power_well i9xx_always_on_power_well[] = {
1654         {
1655                 .name = "always-on",
1656                 .always_on = 1,
1657                 .domains = POWER_DOMAIN_MASK,
1658                 .ops = &i9xx_always_on_power_well_ops,
1659         },
1660 };
1661
1662 static const struct i915_power_well_ops hsw_power_well_ops = {
1663         .sync_hw = hsw_power_well_sync_hw,
1664         .enable = hsw_power_well_enable,
1665         .disable = hsw_power_well_disable,
1666         .is_enabled = hsw_power_well_enabled,
1667 };
1668
1669 static const struct i915_power_well_ops skl_power_well_ops = {
1670         .sync_hw = skl_power_well_sync_hw,
1671         .enable = skl_power_well_enable,
1672         .disable = skl_power_well_disable,
1673         .is_enabled = skl_power_well_enabled,
1674 };
1675
1676 static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
1677         .sync_hw = gen9_dc_off_power_well_sync_hw,
1678         .enable = gen9_dc_off_power_well_enable,
1679         .disable = gen9_dc_off_power_well_disable,
1680         .is_enabled = gen9_dc_off_power_well_enabled,
1681 };
1682
1683 static struct i915_power_well hsw_power_wells[] = {
1684         {
1685                 .name = "always-on",
1686                 .always_on = 1,
1687                 .domains = HSW_ALWAYS_ON_POWER_DOMAINS,
1688                 .ops = &i9xx_always_on_power_well_ops,
1689         },
1690         {
1691                 .name = "display",
1692                 .domains = HSW_DISPLAY_POWER_DOMAINS,
1693                 .ops = &hsw_power_well_ops,
1694         },
1695 };
1696
1697 static struct i915_power_well bdw_power_wells[] = {
1698         {
1699                 .name = "always-on",
1700                 .always_on = 1,
1701                 .domains = BDW_ALWAYS_ON_POWER_DOMAINS,
1702                 .ops = &i9xx_always_on_power_well_ops,
1703         },
1704         {
1705                 .name = "display",
1706                 .domains = BDW_DISPLAY_POWER_DOMAINS,
1707                 .ops = &hsw_power_well_ops,
1708         },
1709 };
1710
1711 static const struct i915_power_well_ops vlv_display_power_well_ops = {
1712         .sync_hw = vlv_power_well_sync_hw,
1713         .enable = vlv_display_power_well_enable,
1714         .disable = vlv_display_power_well_disable,
1715         .is_enabled = vlv_power_well_enabled,
1716 };
1717
1718 static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
1719         .sync_hw = vlv_power_well_sync_hw,
1720         .enable = vlv_dpio_cmn_power_well_enable,
1721         .disable = vlv_dpio_cmn_power_well_disable,
1722         .is_enabled = vlv_power_well_enabled,
1723 };
1724
1725 static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
1726         .sync_hw = vlv_power_well_sync_hw,
1727         .enable = vlv_power_well_enable,
1728         .disable = vlv_power_well_disable,
1729         .is_enabled = vlv_power_well_enabled,
1730 };
1731
1732 static struct i915_power_well vlv_power_wells[] = {
1733         {
1734                 .name = "always-on",
1735                 .always_on = 1,
1736                 .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
1737                 .ops = &i9xx_always_on_power_well_ops,
1738                 .data = PUNIT_POWER_WELL_ALWAYS_ON,
1739         },
1740         {
1741                 .name = "display",
1742                 .domains = VLV_DISPLAY_POWER_DOMAINS,
1743                 .data = PUNIT_POWER_WELL_DISP2D,
1744                 .ops = &vlv_display_power_well_ops,
1745         },
1746         {
1747                 .name = "dpio-tx-b-01",
1748                 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
1749                            VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
1750                            VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
1751                            VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
1752                 .ops = &vlv_dpio_power_well_ops,
1753                 .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
1754         },
1755         {
1756                 .name = "dpio-tx-b-23",
1757                 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
1758                            VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
1759                            VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
1760                            VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
1761                 .ops = &vlv_dpio_power_well_ops,
1762                 .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
1763         },
1764         {
1765                 .name = "dpio-tx-c-01",
1766                 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
1767                            VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
1768                            VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
1769                            VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
1770                 .ops = &vlv_dpio_power_well_ops,
1771                 .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
1772         },
1773         {
1774                 .name = "dpio-tx-c-23",
1775                 .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
1776                            VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
1777                            VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
1778                            VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
1779                 .ops = &vlv_dpio_power_well_ops,
1780                 .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
1781         },
1782         {
1783                 .name = "dpio-common",
1784                 .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
1785                 .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
1786                 .ops = &vlv_dpio_cmn_power_well_ops,
1787         },
1788 };
1789
1790 static struct i915_power_well chv_power_wells[] = {
1791         {
1792                 .name = "always-on",
1793                 .always_on = 1,
1794                 .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
1795                 .ops = &i9xx_always_on_power_well_ops,
1796         },
1797         {
1798                 .name = "display",
1799                 /*
1800                  * Pipe A power well is the new disp2d well. Pipe B and C
1801                  * power wells don't actually exist. Pipe A power well is
1802                  * required for any pipe to work.
1803                  */
1804                 .domains = VLV_DISPLAY_POWER_DOMAINS,
1805                 .data = PIPE_A,
1806                 .ops = &chv_pipe_power_well_ops,
1807         },
1808         {
1809                 .name = "dpio-common-bc",
1810                 .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS,
1811                 .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
1812                 .ops = &chv_dpio_cmn_power_well_ops,
1813         },
1814         {
1815                 .name = "dpio-common-d",
1816                 .domains = CHV_DPIO_CMN_D_POWER_DOMAINS,
1817                 .data = PUNIT_POWER_WELL_DPIO_CMN_D,
1818                 .ops = &chv_dpio_cmn_power_well_ops,
1819         },
1820 };
1821
1822 bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv,
1823                                     int power_well_id)
1824 {
1825         struct i915_power_well *power_well;
1826         bool ret;
1827
1828         power_well = lookup_power_well(dev_priv, power_well_id);
1829         ret = power_well->ops->is_enabled(dev_priv, power_well);
1830
1831         return ret;
1832 }
1833
1834 static struct i915_power_well skl_power_wells[] = {
1835         {
1836                 .name = "always-on",
1837                 .always_on = 1,
1838                 .domains = SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS,
1839                 .ops = &i9xx_always_on_power_well_ops,
1840                 .data = SKL_DISP_PW_ALWAYS_ON,
1841         },
1842         {
1843                 .name = "power well 1",
1844                 /* Handled by the DMC firmware */
1845                 .domains = 0,
1846                 .ops = &skl_power_well_ops,
1847                 .data = SKL_DISP_PW_1,
1848         },
1849         {
1850                 .name = "MISC IO power well",
1851                 /* Handled by the DMC firmware */
1852                 .domains = 0,
1853                 .ops = &skl_power_well_ops,
1854                 .data = SKL_DISP_PW_MISC_IO,
1855         },
1856         {
1857                 .name = "DC off",
1858                 .domains = SKL_DISPLAY_DC_OFF_POWER_DOMAINS,
1859                 .ops = &gen9_dc_off_power_well_ops,
1860                 .data = SKL_DISP_PW_DC_OFF,
1861         },
1862         {
1863                 .name = "power well 2",
1864                 .domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS,
1865                 .ops = &skl_power_well_ops,
1866                 .data = SKL_DISP_PW_2,
1867         },
1868         {
1869                 .name = "DDI A/E power well",
1870                 .domains = SKL_DISPLAY_DDI_A_E_POWER_DOMAINS,
1871                 .ops = &skl_power_well_ops,
1872                 .data = SKL_DISP_PW_DDI_A_E,
1873         },
1874         {
1875                 .name = "DDI B power well",
1876                 .domains = SKL_DISPLAY_DDI_B_POWER_DOMAINS,
1877                 .ops = &skl_power_well_ops,
1878                 .data = SKL_DISP_PW_DDI_B,
1879         },
1880         {
1881                 .name = "DDI C power well",
1882                 .domains = SKL_DISPLAY_DDI_C_POWER_DOMAINS,
1883                 .ops = &skl_power_well_ops,
1884                 .data = SKL_DISP_PW_DDI_C,
1885         },
1886         {
1887                 .name = "DDI D power well",
1888                 .domains = SKL_DISPLAY_DDI_D_POWER_DOMAINS,
1889                 .ops = &skl_power_well_ops,
1890                 .data = SKL_DISP_PW_DDI_D,
1891         },
1892 };
1893
1894 void skl_pw1_misc_io_init(struct drm_i915_private *dev_priv)
1895 {
1896         struct i915_power_well *well;
1897
1898         if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)))
1899                 return;
1900
1901         well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
1902         intel_power_well_enable(dev_priv, well);
1903
1904         well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
1905         intel_power_well_enable(dev_priv, well);
1906 }
1907
1908 void skl_pw1_misc_io_fini(struct drm_i915_private *dev_priv)
1909 {
1910         struct i915_power_well *well;
1911
1912         if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)))
1913                 return;
1914
1915         well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
1916         intel_power_well_disable(dev_priv, well);
1917
1918         well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO);
1919         intel_power_well_disable(dev_priv, well);
1920 }
1921
1922 static struct i915_power_well bxt_power_wells[] = {
1923         {
1924                 .name = "always-on",
1925                 .always_on = 1,
1926                 .domains = BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS,
1927                 .ops = &i9xx_always_on_power_well_ops,
1928         },
1929         {
1930                 .name = "power well 1",
1931                 .domains = BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS,
1932                 .ops = &skl_power_well_ops,
1933                 .data = SKL_DISP_PW_1,
1934         },
1935         {
1936                 .name = "DC off",
1937                 .domains = BXT_DISPLAY_DC_OFF_POWER_DOMAINS,
1938                 .ops = &gen9_dc_off_power_well_ops,
1939                 .data = SKL_DISP_PW_DC_OFF,
1940         },
1941         {
1942                 .name = "power well 2",
1943                 .domains = BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS,
1944                 .ops = &skl_power_well_ops,
1945                 .data = SKL_DISP_PW_2,
1946         },
1947 };
1948
1949 static int
1950 sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
1951                                    int disable_power_well)
1952 {
1953         if (disable_power_well >= 0)
1954                 return !!disable_power_well;
1955
1956         if (IS_BROXTON(dev_priv)) {
1957                 DRM_DEBUG_KMS("Disabling display power well support\n");
1958                 return 0;
1959         }
1960
1961         return 1;
1962 }
1963
1964 static uint32_t get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
1965                                     int enable_dc)
1966 {
1967         uint32_t mask;
1968         int requested_dc;
1969         int max_dc;
1970
1971         if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
1972                 max_dc = 2;
1973                 mask = 0;
1974         } else if (IS_BROXTON(dev_priv)) {
1975                 max_dc = 1;
1976                 /*
1977                  * DC9 has a separate HW flow from the rest of the DC states,
1978                  * not depending on the DMC firmware. It's needed by system
1979                  * suspend/resume, so allow it unconditionally.
1980                  */
1981                 mask = DC_STATE_EN_DC9;
1982         } else {
1983                 max_dc = 0;
1984                 mask = 0;
1985         }
1986
1987         if (!i915.disable_power_well)
1988                 max_dc = 0;
1989
1990         if (enable_dc >= 0 && enable_dc <= max_dc) {
1991                 requested_dc = enable_dc;
1992         } else if (enable_dc == -1) {
1993                 requested_dc = max_dc;
1994         } else if (enable_dc > max_dc && enable_dc <= 2) {
1995                 DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n",
1996                               enable_dc, max_dc);
1997                 requested_dc = max_dc;
1998         } else {
1999                 DRM_ERROR("Unexpected value for enable_dc (%d)\n", enable_dc);
2000                 requested_dc = max_dc;
2001         }
2002
2003         if (requested_dc > 1)
2004                 mask |= DC_STATE_EN_UPTO_DC6;
2005         if (requested_dc > 0)
2006                 mask |= DC_STATE_EN_UPTO_DC5;
2007
2008         DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask);
2009
2010         return mask;
2011 }
2012
2013 #define set_power_wells(power_domains, __power_wells) ({                \
2014         (power_domains)->power_wells = (__power_wells);                 \
2015         (power_domains)->power_well_count = ARRAY_SIZE(__power_wells);  \
2016 })
2017
2018 /**
2019  * intel_power_domains_init - initializes the power domain structures
2020  * @dev_priv: i915 device instance
2021  *
2022  * Initializes the power domain structures for @dev_priv depending upon the
2023  * supported platform.
2024  */
2025 int intel_power_domains_init(struct drm_i915_private *dev_priv)
2026 {
2027         struct i915_power_domains *power_domains = &dev_priv->power_domains;
2028
2029         i915.disable_power_well = sanitize_disable_power_well_option(dev_priv,
2030                                                      i915.disable_power_well);
2031         dev_priv->csr.allowed_dc_mask = get_allowed_dc_mask(dev_priv,
2032                                                             i915.enable_dc);
2033
2034         BUILD_BUG_ON(POWER_DOMAIN_NUM > 31);
2035
2036         mutex_init(&power_domains->lock);
2037
2038         /*
2039          * The enabling order will be from lower to higher indexed wells,
2040          * the disabling order is reversed.
2041          */
2042         if (IS_HASWELL(dev_priv->dev)) {
2043                 set_power_wells(power_domains, hsw_power_wells);
2044         } else if (IS_BROADWELL(dev_priv->dev)) {
2045                 set_power_wells(power_domains, bdw_power_wells);
2046         } else if (IS_SKYLAKE(dev_priv->dev) || IS_KABYLAKE(dev_priv->dev)) {
2047                 set_power_wells(power_domains, skl_power_wells);
2048         } else if (IS_BROXTON(dev_priv->dev)) {
2049                 set_power_wells(power_domains, bxt_power_wells);
2050         } else if (IS_CHERRYVIEW(dev_priv->dev)) {
2051                 set_power_wells(power_domains, chv_power_wells);
2052         } else if (IS_VALLEYVIEW(dev_priv->dev)) {
2053                 set_power_wells(power_domains, vlv_power_wells);
2054         } else {
2055                 set_power_wells(power_domains, i9xx_always_on_power_well);
2056         }
2057
2058         return 0;
2059 }
2060
2061 /**
2062  * intel_power_domains_fini - finalizes the power domain structures
2063  * @dev_priv: i915 device instance
2064  *
2065  * Finalizes the power domain structures for @dev_priv depending upon the
2066  * supported platform. This function also disables runtime pm and ensures that
2067  * the device stays powered up so that the driver can be reloaded.
2068  */
2069 void intel_power_domains_fini(struct drm_i915_private *dev_priv)
2070 {
2071         struct device *device = &dev_priv->dev->pdev->dev;
2072
2073         /*
2074          * The i915.ko module is still not prepared to be loaded when
2075          * the power well is not enabled, so just enable it in case
2076          * we're going to unload/reload.
2077          * The following also reacquires the RPM reference the core passed
2078          * to the driver during loading, which is dropped in
2079          * intel_runtime_pm_enable(). We have to hand back the control of the
2080          * device to the core with this reference held.
2081          */
2082         intel_display_set_init_power(dev_priv, true);
2083
2084         /* Remove the refcount we took to keep power well support disabled. */
2085         if (!i915.disable_power_well)
2086                 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
2087
2088         /*
2089          * Remove the refcount we took in intel_runtime_pm_enable() in case
2090          * the platform doesn't support runtime PM.
2091          */
2092         if (!HAS_RUNTIME_PM(dev_priv))
2093                 pm_runtime_put(device);
2094 }
2095
2096 static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
2097 {
2098         struct i915_power_domains *power_domains = &dev_priv->power_domains;
2099         struct i915_power_well *power_well;
2100         int i;
2101
2102         mutex_lock(&power_domains->lock);
2103         for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
2104                 power_well->ops->sync_hw(dev_priv, power_well);
2105                 power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
2106                                                                      power_well);
2107         }
2108         mutex_unlock(&power_domains->lock);
2109 }
2110
2111 static void skl_display_core_init(struct drm_i915_private *dev_priv,
2112                                   bool resume)
2113 {
2114         struct i915_power_domains *power_domains = &dev_priv->power_domains;
2115         uint32_t val;
2116
2117         gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2118
2119         /* enable PCH reset handshake */
2120         val = I915_READ(HSW_NDE_RSTWRN_OPT);
2121         I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
2122
2123         /* enable PG1 and Misc I/O */
2124         mutex_lock(&power_domains->lock);
2125         skl_pw1_misc_io_init(dev_priv);
2126         mutex_unlock(&power_domains->lock);
2127
2128         if (!resume)
2129                 return;
2130
2131         skl_init_cdclk(dev_priv);
2132
2133         if (dev_priv->csr.dmc_payload)
2134                 intel_csr_load_program(dev_priv);
2135 }
2136
2137 static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
2138 {
2139         struct i915_power_domains *power_domains = &dev_priv->power_domains;
2140
2141         gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
2142
2143         skl_uninit_cdclk(dev_priv);
2144
2145         /* The spec doesn't call for removing the reset handshake flag */
2146         /* disable PG1 and Misc I/O */
2147         mutex_lock(&power_domains->lock);
2148         skl_pw1_misc_io_fini(dev_priv);
2149         mutex_unlock(&power_domains->lock);
2150 }
2151
2152 static void chv_phy_control_init(struct drm_i915_private *dev_priv)
2153 {
2154         struct i915_power_well *cmn_bc =
2155                 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
2156         struct i915_power_well *cmn_d =
2157                 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D);
2158
2159         /*
2160          * DISPLAY_PHY_CONTROL can get corrupted if read. As a
2161          * workaround never ever read DISPLAY_PHY_CONTROL, and
2162          * instead maintain a shadow copy ourselves. Use the actual
2163          * power well state and lane status to reconstruct the
2164          * expected initial value.
2165          */
2166         dev_priv->chv_phy_control =
2167                 PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) |
2168                 PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) |
2169                 PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) |
2170                 PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) |
2171                 PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0);
2172
2173         /*
2174          * If all lanes are disabled we leave the override disabled
2175          * with all power down bits cleared to match the state we
2176          * would use after disabling the port. Otherwise enable the
2177          * override and set the lane powerdown bits accding to the
2178          * current lane status.
2179          */
2180         if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) {
2181                 uint32_t status = I915_READ(DPLL(PIPE_A));
2182                 unsigned int mask;
2183
2184                 mask = status & DPLL_PORTB_READY_MASK;
2185                 if (mask == 0xf)
2186                         mask = 0x0;
2187                 else
2188                         dev_priv->chv_phy_control |=
2189                                 PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0);
2190
2191                 dev_priv->chv_phy_control |=
2192                         PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0);
2193
2194                 mask = (status & DPLL_PORTC_READY_MASK) >> 4;
2195                 if (mask == 0xf)
2196                         mask = 0x0;
2197                 else
2198                         dev_priv->chv_phy_control |=
2199                                 PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1);
2200
2201                 dev_priv->chv_phy_control |=
2202                         PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1);
2203
2204                 dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0);
2205
2206                 dev_priv->chv_phy_assert[DPIO_PHY0] = false;
2207         } else {
2208                 dev_priv->chv_phy_assert[DPIO_PHY0] = true;
2209         }
2210
2211         if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) {
2212                 uint32_t status = I915_READ(DPIO_PHY_STATUS);
2213                 unsigned int mask;
2214
2215                 mask = status & DPLL_PORTD_READY_MASK;
2216
2217                 if (mask == 0xf)
2218                         mask = 0x0;
2219                 else
2220                         dev_priv->chv_phy_control |=
2221                                 PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0);
2222
2223                 dev_priv->chv_phy_control |=
2224                         PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0);
2225
2226                 dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1);
2227
2228                 dev_priv->chv_phy_assert[DPIO_PHY1] = false;
2229         } else {
2230                 dev_priv->chv_phy_assert[DPIO_PHY1] = true;
2231         }
2232
2233         I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
2234
2235         DRM_DEBUG_KMS("Initial PHY_CONTROL=0x%08x\n",
2236                       dev_priv->chv_phy_control);
2237 }
2238
2239 static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
2240 {
2241         struct i915_power_well *cmn =
2242                 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
2243         struct i915_power_well *disp2d =
2244                 lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
2245
2246         /* If the display might be already active skip this */
2247         if (cmn->ops->is_enabled(dev_priv, cmn) &&
2248             disp2d->ops->is_enabled(dev_priv, disp2d) &&
2249             I915_READ(DPIO_CTL) & DPIO_CMNRST)
2250                 return;
2251
2252         DRM_DEBUG_KMS("toggling display PHY side reset\n");
2253
2254         /* cmnlane needs DPLL registers */
2255         disp2d->ops->enable(dev_priv, disp2d);
2256
2257         /*
2258          * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
2259          * Need to assert and de-assert PHY SB reset by gating the
2260          * common lane power, then un-gating it.
2261          * Simply ungating isn't enough to reset the PHY enough to get
2262          * ports and lanes running.
2263          */
2264         cmn->ops->disable(dev_priv, cmn);
2265 }
2266
2267 /**
2268  * intel_power_domains_init_hw - initialize hardware power domain state
2269  * @dev_priv: i915 device instance
2270  *
2271  * This function initializes the hardware power domain state and enables all
2272  * power domains using intel_display_set_init_power().
2273  */
2274 void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
2275 {
2276         struct drm_device *dev = dev_priv->dev;
2277         struct i915_power_domains *power_domains = &dev_priv->power_domains;
2278
2279         power_domains->initializing = true;
2280
2281         if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
2282                 skl_display_core_init(dev_priv, resume);
2283         } else if (IS_CHERRYVIEW(dev)) {
2284                 mutex_lock(&power_domains->lock);
2285                 chv_phy_control_init(dev_priv);
2286                 mutex_unlock(&power_domains->lock);
2287         } else if (IS_VALLEYVIEW(dev)) {
2288                 mutex_lock(&power_domains->lock);
2289                 vlv_cmnlane_wa(dev_priv);
2290                 mutex_unlock(&power_domains->lock);
2291         }
2292
2293         /* For now, we need the power well to be always enabled. */
2294         intel_display_set_init_power(dev_priv, true);
2295         /* Disable power support if the user asked so. */
2296         if (!i915.disable_power_well)
2297                 intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
2298         intel_power_domains_sync_hw(dev_priv);
2299         power_domains->initializing = false;
2300 }
2301
2302 /**
2303  * intel_power_domains_suspend - suspend power domain state
2304  * @dev_priv: i915 device instance
2305  *
2306  * This function prepares the hardware power domain state before entering
2307  * system suspend. It must be paired with intel_power_domains_init_hw().
2308  */
2309 void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
2310 {
2311         /*
2312          * Even if power well support was disabled we still want to disable
2313          * power wells while we are system suspended.
2314          */
2315         if (!i915.disable_power_well)
2316                 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
2317
2318         if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
2319                 skl_display_core_uninit(dev_priv);
2320 }
2321
2322 /**
2323  * intel_runtime_pm_get - grab a runtime pm reference
2324  * @dev_priv: i915 device instance
2325  *
2326  * This function grabs a device-level runtime pm reference (mostly used for GEM
2327  * code to ensure the GTT or GT is on) and ensures that it is powered up.
2328  *
2329  * Any runtime pm reference obtained by this function must have a symmetric
2330  * call to intel_runtime_pm_put() to release the reference again.
2331  */
2332 void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
2333 {
2334         struct drm_device *dev = dev_priv->dev;
2335         struct device *device = &dev->pdev->dev;
2336
2337         pm_runtime_get_sync(device);
2338
2339         atomic_inc(&dev_priv->pm.wakeref_count);
2340         assert_rpm_wakelock_held(dev_priv);
2341 }
2342
2343 /**
2344  * intel_runtime_pm_get_if_in_use - grab a runtime pm reference if device in use
2345  * @dev_priv: i915 device instance
2346  *
2347  * This function grabs a device-level runtime pm reference if the device is
2348  * already in use and ensures that it is powered up.
2349  *
2350  * Any runtime pm reference obtained by this function must have a symmetric
2351  * call to intel_runtime_pm_put() to release the reference again.
2352  */
2353 bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv)
2354 {
2355         struct drm_device *dev = dev_priv->dev;
2356         struct device *device = &dev->pdev->dev;
2357
2358         if (IS_ENABLED(CONFIG_PM)) {
2359                 int ret = pm_runtime_get_if_in_use(device);
2360
2361                 /*
2362                  * In cases runtime PM is disabled by the RPM core and we get
2363                  * an -EINVAL return value we are not supposed to call this
2364                  * function, since the power state is undefined. This applies
2365                  * atm to the late/early system suspend/resume handlers.
2366                  */
2367                 WARN_ON_ONCE(ret < 0);
2368                 if (ret <= 0)
2369                         return false;
2370         }
2371
2372         atomic_inc(&dev_priv->pm.wakeref_count);
2373         assert_rpm_wakelock_held(dev_priv);
2374
2375         return true;
2376 }
2377
2378 /**
2379  * intel_runtime_pm_get_noresume - grab a runtime pm reference
2380  * @dev_priv: i915 device instance
2381  *
2382  * This function grabs a device-level runtime pm reference (mostly used for GEM
2383  * code to ensure the GTT or GT is on).
2384  *
2385  * It will _not_ power up the device but instead only check that it's powered
2386  * on.  Therefore it is only valid to call this functions from contexts where
2387  * the device is known to be powered up and where trying to power it up would
2388  * result in hilarity and deadlocks. That pretty much means only the system
2389  * suspend/resume code where this is used to grab runtime pm references for
2390  * delayed setup down in work items.
2391  *
2392  * Any runtime pm reference obtained by this function must have a symmetric
2393  * call to intel_runtime_pm_put() to release the reference again.
2394  */
2395 void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
2396 {
2397         struct drm_device *dev = dev_priv->dev;
2398         struct device *device = &dev->pdev->dev;
2399
2400         assert_rpm_wakelock_held(dev_priv);
2401         pm_runtime_get_noresume(device);
2402
2403         atomic_inc(&dev_priv->pm.wakeref_count);
2404 }
2405
2406 /**
2407  * intel_runtime_pm_put - release a runtime pm reference
2408  * @dev_priv: i915 device instance
2409  *
2410  * This function drops the device-level runtime pm reference obtained by
2411  * intel_runtime_pm_get() and might power down the corresponding
2412  * hardware block right away if this is the last reference.
2413  */
2414 void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
2415 {
2416         struct drm_device *dev = dev_priv->dev;
2417         struct device *device = &dev->pdev->dev;
2418
2419         assert_rpm_wakelock_held(dev_priv);
2420         if (atomic_dec_and_test(&dev_priv->pm.wakeref_count))
2421                 atomic_inc(&dev_priv->pm.atomic_seq);
2422
2423         pm_runtime_mark_last_busy(device);
2424         pm_runtime_put_autosuspend(device);
2425 }
2426
2427 /**
2428  * intel_runtime_pm_enable - enable runtime pm
2429  * @dev_priv: i915 device instance
2430  *
2431  * This function enables runtime pm at the end of the driver load sequence.
2432  *
2433  * Note that this function does currently not enable runtime pm for the
2434  * subordinate display power domains. That is only done on the first modeset
2435  * using intel_display_set_init_power().
2436  */
2437 void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
2438 {
2439         struct drm_device *dev = dev_priv->dev;
2440         struct device *device = &dev->pdev->dev;
2441
2442         pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
2443         pm_runtime_mark_last_busy(device);
2444
2445         /*
2446          * Take a permanent reference to disable the RPM functionality and drop
2447          * it only when unloading the driver. Use the low level get/put helpers,
2448          * so the driver's own RPM reference tracking asserts also work on
2449          * platforms without RPM support.
2450          */
2451         if (!HAS_RUNTIME_PM(dev)) {
2452                 pm_runtime_dont_use_autosuspend(device);
2453                 pm_runtime_get_sync(device);
2454         } else {
2455                 pm_runtime_use_autosuspend(device);
2456         }
2457
2458         /*
2459          * The core calls the driver load handler with an RPM reference held.
2460          * We drop that here and will reacquire it during unloading in
2461          * intel_power_domains_fini().
2462          */
2463         pm_runtime_put_autosuspend(device);
2464 }
2465