Merge remote-tracking branches 'spi/fix/qup' and 'spi/fix/topcliff-pch' into spi...
[cascardo/linux.git] / drivers / media / platform / Kconfig
1 #
2 # Platform drivers
3 #       All drivers here are currently for webcam support
4
5 menuconfig V4L_PLATFORM_DRIVERS
6         bool "V4L platform devices"
7         depends on MEDIA_CAMERA_SUPPORT
8         default n
9         ---help---
10           Say Y here to enable support for platform-specific V4L drivers.
11
12 if V4L_PLATFORM_DRIVERS
13
14 source "drivers/media/platform/marvell-ccic/Kconfig"
15
16 config VIDEO_VIA_CAMERA
17         tristate "VIAFB camera controller support"
18         depends on FB_VIA
19         select VIDEOBUF_DMA_SG
20         select VIDEO_OV7670
21         help
22            Driver support for the integrated camera controller in VIA
23            Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
24            with ov7670 sensors.
25
26 #
27 # Platform multimedia device configuration
28 #
29
30 source "drivers/media/platform/davinci/Kconfig"
31
32 source "drivers/media/platform/omap/Kconfig"
33
34 source "drivers/media/platform/blackfin/Kconfig"
35
36 config VIDEO_SH_VOU
37         tristate "SuperH VOU video output driver"
38         depends on MEDIA_CAMERA_SUPPORT
39         depends on VIDEO_DEV && I2C && HAS_DMA
40         depends on ARCH_SHMOBILE || COMPILE_TEST
41         select VIDEOBUF_DMA_CONTIG
42         help
43           Support for the Video Output Unit (VOU) on SuperH SoCs.
44
45 config VIDEO_VIU
46         tristate "Freescale VIU Video Driver"
47         depends on VIDEO_V4L2 && PPC_MPC512x
48         select VIDEOBUF_DMA_CONTIG
49         default y
50         ---help---
51           Support for Freescale VIU video driver. This device captures
52           video data, or overlays video on DIU frame buffer.
53
54           Say Y here if you want to enable VIU device on MPC5121e Rev2+.
55           In doubt, say N.
56
57 config VIDEO_TIMBERDALE
58         tristate "Support for timberdale Video In/LogiWIN"
59         depends on MFD_TIMBERDALE && VIDEO_V4L2 && I2C && DMADEVICES
60         select DMA_ENGINE
61         select TIMB_DMA
62         select VIDEO_ADV7180
63         select VIDEOBUF_DMA_CONTIG
64         ---help---
65           Add support for the Video In peripherial of the timberdale FPGA.
66
67 config VIDEO_VINO
68         tristate "SGI Vino Video For Linux"
69         depends on I2C && SGI_IP22 && VIDEO_V4L2
70         select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
71         help
72           Say Y here to build in support for the Vino video input system found
73           on SGI Indy machines.
74
75 config VIDEO_M32R_AR
76         tristate "AR devices"
77         depends on M32R && VIDEO_V4L2
78         ---help---
79           This is a video4linux driver for the Renesas AR (Artificial Retina)
80           camera module.
81
82 config VIDEO_M32R_AR_M64278
83         tristate "AR device with color module M64278(VGA)"
84         depends on PLAT_M32700UT
85         select VIDEO_M32R_AR
86         ---help---
87           This is a video4linux driver for the Renesas AR (Artificial
88           Retina) with M64278E-800 camera module.
89           This module supports VGA(640x480 pixels) resolutions.
90
91           To compile this driver as a module, choose M here: the
92           module will be called arv.
93
94 config VIDEO_OMAP3
95         tristate "OMAP 3 Camera support"
96         depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
97         ---help---
98           Driver for an OMAP 3 camera controller.
99
100 config VIDEO_OMAP3_DEBUG
101         bool "OMAP 3 Camera debug messages"
102         depends on VIDEO_OMAP3
103         ---help---
104           Enable debug messages on OMAP 3 camera controller driver.
105
106 config VIDEO_S3C_CAMIF
107         tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
108         depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
109         depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
110         select VIDEOBUF2_DMA_CONTIG
111         ---help---
112           This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
113           host interface (CAMIF).
114
115           To compile this driver as a module, choose M here: the module
116           will be called s3c-camif.
117
118 source "drivers/media/platform/soc_camera/Kconfig"
119 source "drivers/media/platform/exynos4-is/Kconfig"
120 source "drivers/media/platform/s5p-tv/Kconfig"
121
122 endif # V4L_PLATFORM_DRIVERS
123
124 menuconfig V4L_MEM2MEM_DRIVERS
125         bool "Memory-to-memory multimedia devices"
126         depends on VIDEO_V4L2
127         depends on MEDIA_CAMERA_SUPPORT
128         default n
129         ---help---
130           Say Y here to enable selecting drivers for V4L devices that
131           use system memory for both source and destination buffers, as opposed
132           to capture and output drivers, which use memory buffers for just
133           one of those.
134
135 if V4L_MEM2MEM_DRIVERS
136
137 config VIDEO_CODA
138         tristate "Chips&Media Coda multi-standard codec IP"
139         depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC
140         select SRAM
141         select VIDEOBUF2_DMA_CONTIG
142         select V4L2_MEM2MEM_DEV
143         ---help---
144            Coda is a range of video codec IPs that supports
145            H.264, MPEG-4, and other video formats.
146
147 config VIDEO_MEM2MEM_DEINTERLACE
148         tristate "Deinterlace support"
149         depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
150         select VIDEOBUF2_DMA_CONTIG
151         select V4L2_MEM2MEM_DEV
152         help
153             Generic deinterlacing V4L2 driver.
154
155 config VIDEO_SAMSUNG_S5P_G2D
156         tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
157         depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
158         select VIDEOBUF2_DMA_CONTIG
159         select V4L2_MEM2MEM_DEV
160         default n
161         ---help---
162           This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
163           2d graphics accelerator.
164
165 config VIDEO_SAMSUNG_S5P_JPEG
166         tristate "Samsung S5P/Exynos4 JPEG codec driver"
167         depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
168         select VIDEOBUF2_DMA_CONTIG
169         select V4L2_MEM2MEM_DEV
170         ---help---
171           This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
172
173 config VIDEO_SAMSUNG_S5P_MFC
174         tristate "Samsung S5P MFC Video Codec"
175         depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
176         select VIDEOBUF2_DMA_CONTIG
177         default n
178         help
179             MFC 5.1 and 6.x driver for V4L2
180
181 config VIDEO_MX2_EMMAPRP
182         tristate "MX2 eMMa-PrP support"
183         depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
184         select VIDEOBUF2_DMA_CONTIG
185         select V4L2_MEM2MEM_DEV
186         help
187             MX2X chips have a PrP that can be used to process buffers from
188             memory to memory. Operations include resizing and format
189             conversion.
190
191 config VIDEO_SAMSUNG_EXYNOS_GSC
192         tristate "Samsung Exynos G-Scaler driver"
193         depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5
194         select VIDEOBUF2_DMA_CONTIG
195         select V4L2_MEM2MEM_DEV
196         help
197           This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
198
199 config VIDEO_SH_VEU
200         tristate "SuperH VEU mem2mem video processing driver"
201         depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
202         select VIDEOBUF2_DMA_CONTIG
203         select V4L2_MEM2MEM_DEV
204         help
205             Support for the Video Engine Unit (VEU) on SuperH and
206             SH-Mobile SoCs.
207
208 config VIDEO_RENESAS_VSP1
209         tristate "Renesas VSP1 Video Processing Engine"
210         depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
211         select VIDEOBUF2_DMA_CONTIG
212         ---help---
213           This is a V4L2 driver for the Renesas VSP1 video processing engine.
214
215           To compile this driver as a module, choose M here: the module
216           will be called vsp1.
217
218 config VIDEO_TI_VPE
219         tristate "TI VPE (Video Processing Engine) driver"
220         depends on VIDEO_DEV && VIDEO_V4L2 && SOC_DRA7XX
221         select VIDEOBUF2_DMA_CONTIG
222         select V4L2_MEM2MEM_DEV
223         default n
224         ---help---
225           Support for the TI VPE(Video Processing Engine) block
226           found on DRA7XX SoC.
227
228 config VIDEO_TI_VPE_DEBUG
229         bool "VPE debug messages"
230         depends on VIDEO_TI_VPE
231         ---help---
232           Enable debug messages on VPE driver.
233
234 endif # V4L_MEM2MEM_DRIVERS
235
236 menuconfig V4L_TEST_DRIVERS
237         bool "Media test drivers"
238         depends on MEDIA_CAMERA_SUPPORT
239
240 if V4L_TEST_DRIVERS
241 config VIDEO_VIVI
242         tristate "Virtual Video Driver"
243         depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
244         select FONT_SUPPORT
245         select FONT_8x16
246         select VIDEOBUF2_VMALLOC
247         default n
248         ---help---
249           Enables a virtual video driver. This device shows a color bar
250           and a timestamp, as a real device would generate by using V4L2
251           api.
252           Say Y here if you want to test video apps or debug V4L devices.
253           In doubt, say N.
254
255 config VIDEO_MEM2MEM_TESTDEV
256         tristate "Virtual test device for mem2mem framework"
257         depends on VIDEO_DEV && VIDEO_V4L2
258         select VIDEOBUF2_VMALLOC
259         select V4L2_MEM2MEM_DEV
260         default n
261         ---help---
262           This is a virtual test device for the memory-to-memory driver
263           framework.
264 endif #V4L_TEST_DRIVERS