drivers/media/video/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  29
  30 #include <linux/delay.h>
  31 #include <linux/module.h>
  32 #include <linux/kmod.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/firmware.h>
  37 #include <net/checksum.h>
  38
  39 #include <asm/unaligned.h>
  40 #include <asm/io.h>
  41
  42 #include "bttvp.h"
  43 #include <media/v4l2-common.h>
  44 #include <media/tvaudio.h>
  45 #include "bttv-audio-hook.h"
  46
  47 /* fwd decl */
  48 static void boot_msp34xx(struct bttv *btv, int pin);
  49 static void hauppauge_eeprom(struct bttv *btv);
  50 static void avermedia_eeprom(struct bttv *btv);
  51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  52 static void modtec_eeprom(struct bttv *btv);
  53 static void init_PXC200(struct bttv *btv);
  54 static void init_RTV24(struct bttv *btv);
  55
  56 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  57 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  58 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  59 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  60 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  61
  62 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  63
  64 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  65 static void picolo_tetra_init(struct bttv *btv);
  66
  67 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  68 static void tibetCS16_init(struct bttv *btv);
  69
  70 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  71 static void kodicom4400r_init(struct bttv *btv);
  72
  73 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  74 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  75
  76 static void geovision_muxsel(struct bttv *btv, unsigned int input);
  77
  78 static void phytec_muxsel(struct bttv *btv, unsigned int input);
  79
  80 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  81 static void gv800s_init(struct bttv *btv);
  82
  83 static void td3116_muxsel(struct bttv *btv, unsigned int input);
  84
  85 static int terratec_active_radio_upgrade(struct bttv *btv);
  86 static int tea5757_read(struct bttv *btv);
  87 static int tea5757_write(struct bttv *btv, int value);
  88 static void identify_by_eeprom(struct bttv *btv,
  89                                unsigned char eeprom_data[256]);
  90 static int __devinit pvr_boot(struct bttv *btv);
  91
  92 /* config variables */
  93 static unsigned int triton1;
  94 static unsigned int vsfx;
  95 static unsigned int latency = UNSET;
  96 int no_overlay=-1;
  97
  98 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  99 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 100 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int audiodev[BTTV_MAX];
 104 static unsigned int saa6588[BTTV_MAX];
 105 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 106 static unsigned int autoload = UNSET;
 107 static unsigned int gpiomask = UNSET;
 108 static unsigned int audioall = UNSET;
 109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 110
 111 /* insmod options */
 112 module_param(triton1,    int, 0444);
 113 module_param(vsfx,       int, 0444);
 114 module_param(no_overlay, int, 0444);
 115 module_param(latency,    int, 0444);
 116 module_param(gpiomask,   int, 0444);
 117 module_param(audioall,   int, 0444);
 118 module_param(autoload,   int, 0444);
 119
 120 module_param_array(card,     int, NULL, 0444);
 121 module_param_array(pll,      int, NULL, 0444);
 122 module_param_array(tuner,    int, NULL, 0444);
 123 module_param_array(svhs,     int, NULL, 0444);
 124 module_param_array(remote,   int, NULL, 0444);
 125 module_param_array(audiodev, int, NULL, 0444);
 126 module_param_array(audiomux, int, NULL, 0444);
 127
 128 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 129                  "[enable bug compatibility for triton1 + others]");
 130 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 131                  "[yet another chipset flaw workaround]");
 132 MODULE_PARM_DESC(latency,"pci latency timer");
 133 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 134 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 135 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 136 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 137 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 138                 "\t\t-1 = no audio\n"
 139                 "\t\t 0 = autodetect (default)\n"
 140                 "\t\t 1 = msp3400\n"
 141                 "\t\t 2 = tda7432\n"
 142                 "\t\t 3 = tvaudio");
 143 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 144 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 145                 " [some VIA/SIS chipsets are known to have problem with overlay]");
 146
 147 /* ----------------------------------------------------------------------- */
 148 /* list of card IDs for bt878+ cards                                       */
 149
 150 static struct CARD {
 151         unsigned id;
 152         int cardnr;
 153         char *name;
 154 } cards[] __devinitdata = {
 155         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 156         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 157         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 158         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 159         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 160         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 161         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 162         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 163         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 164
 165         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 166         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 167
 168         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 169         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 170         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 171         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 172         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 173         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 174         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 175         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 176         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 177
 178         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 179         /* some cards ship with byteswapped IDs ... */
 180         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 181         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 182         /* this seems to happen as well ... */
 183         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 184
 185         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 186         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 187         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 188
 189         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 190         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 191         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 192         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 193         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 194         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 195         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 196
 197         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 198         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 199         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 200         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 201         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 202
 203         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 204         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 205         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 206         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 207
 208         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 209         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 210         /* clashes with FlyVideo
 211          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 212         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 213         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 214         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 215         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 216
 217         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 218         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 219         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 220         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 221         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 222
 223         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 224         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 225         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 226         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 227         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 228
 229         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 230         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 231         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 232         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 233
 234         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 235         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 236         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 237         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 238
 239         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 240         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 241         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 242         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 243         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 244         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 245         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 246         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 247         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 248         { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 249         { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 250         { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 251         { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 252         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 257         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 258         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 259         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 260         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 261         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 262         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 263         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 264         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 265         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 266         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 267         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 268         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 269         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 270         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 271         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 272
 273         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 274         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 275
 276         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 277         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 278         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 279         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 280         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 281         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 282
 283         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 284         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 285
 286         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 287         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 288         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 289         { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 290         { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 291         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 292         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 293         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 294         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 295         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 296
 297         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 298         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 299
 300         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 301         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 302         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 303         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 304
 305         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 306
 307         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 308         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 309
 310         /* likely broken, vendor id doesn't match the other magic views ...
 311          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 312
 313         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 314         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 315
 316         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 317
 318         /* DVB cards (using pci function .1 for mpeg data xfer) */
 319         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 320         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 321         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 322         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 323         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 324         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 325         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 326         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 327         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 328         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 329         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 330         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 331         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 332         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 333         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 334         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 335         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 336         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 337         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 338
 339         { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 340         { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 341         { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 342         { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 343         { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 344         { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 345         { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 346         { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 347         { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 348         { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
 349         { 0, -1, NULL }
 350 };
 351
 352 /* ----------------------------------------------------------------------- */
 353 /* array with description for bt848 / bt878 tv/grabber cards               */
 354
 355 struct tvcard bttv_tvcards[] = {
 356         /* ---- card 0x00 ---------------------------------- */
 357         [BTTV_BOARD_UNKNOWN] = {
 358                 .name           = " *** UNKNOWN/GENERIC *** ",
 359                 .video_inputs   = 4,
 360                 .svhs           = 2,
 361                 .muxsel         = MUXSEL(2, 3, 1, 0),
 362                 .tuner_type     = UNSET,
 363                 .tuner_addr     = ADDR_UNSET,
 364         },
 365         [BTTV_BOARD_MIRO] = {
 366                 .name           = "MIRO PCTV",
 367                 .video_inputs   = 4,
 368                 /* .audio_inputs= 1, */
 369                 .svhs           = 2,
 370                 .gpiomask       = 15,
 371                 .muxsel         = MUXSEL(2, 3, 1, 1),
 372                 .gpiomux        = { 2, 0, 0, 0 },
 373                 .gpiomute       = 10,
 374                 .tuner_type     = UNSET,
 375                 .tuner_addr     = ADDR_UNSET,
 376         },
 377         [BTTV_BOARD_HAUPPAUGE] = {
 378                 .name           = "Hauppauge (bt848)",
 379                 .video_inputs   = 4,
 380                 /* .audio_inputs= 1, */
 381                 .svhs           = 2,
 382                 .gpiomask       = 7,
 383                 .muxsel         = MUXSEL(2, 3, 1, 1),
 384                 .gpiomux        = { 0, 1, 2, 3 },
 385                 .gpiomute       = 4,
 386                 .tuner_type     = UNSET,
 387                 .tuner_addr     = ADDR_UNSET,
 388         },
 389         [BTTV_BOARD_STB] = {
 390                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 391                 .video_inputs   = 3,
 392                 /* .audio_inputs= 1, */
 393                 .svhs           = 2,
 394                 .gpiomask       = 7,
 395                 .muxsel         = MUXSEL(2, 3, 1, 1),
 396                 .gpiomux        = { 4, 0, 2, 3 },
 397                 .gpiomute       = 1,
 398                 .no_msp34xx     = 1,
 399                 .tuner_type     = TUNER_PHILIPS_NTSC,
 400                 .tuner_addr     = ADDR_UNSET,
 401                 .pll            = PLL_28,
 402                 .has_radio      = 1,
 403         },
 404
 405         /* ---- card 0x04 ---------------------------------- */
 406         [BTTV_BOARD_INTEL] = {
 407                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 408                 .video_inputs   = 4,
 409                 /* .audio_inputs= 0, */
 410                 .svhs           = 2,
 411                 .gpiomask       = 0,
 412                 .muxsel         = MUXSEL(2, 3, 1, 1),
 413                 .gpiomux        = { 0 },
 414                 .tuner_type     = TUNER_ABSENT,
 415                 .tuner_addr     = ADDR_UNSET,
 416         },
 417         [BTTV_BOARD_DIAMOND] = {
 418                 .name           = "Diamond DTV2000",
 419                 .video_inputs   = 4,
 420                 /* .audio_inputs= 1, */
 421                 .svhs           = 2,
 422                 .gpiomask       = 3,
 423                 .muxsel         = MUXSEL(2, 3, 1, 0),
 424                 .gpiomux        = { 0, 1, 0, 1 },
 425                 .gpiomute       = 3,
 426                 .tuner_type     = UNSET,
 427                 .tuner_addr     = ADDR_UNSET,
 428         },
 429         [BTTV_BOARD_AVERMEDIA] = {
 430                 .name           = "AVerMedia TVPhone",
 431                 .video_inputs   = 3,
 432                 /* .audio_inputs= 1, */
 433                 .svhs           = 3,
 434                 .muxsel         = MUXSEL(2, 3, 1, 1),
 435                 .gpiomask       = 0x0f,
 436                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 437                 /*                0x04 for some cards ?? */
 438                 .tuner_type     = UNSET,
 439                 .tuner_addr     = ADDR_UNSET,
 440                 .audio_mode_gpio= avermedia_tvphone_audio,
 441                 .has_remote     = 1,
 442         },
 443         [BTTV_BOARD_MATRIX_VISION] = {
 444                 .name           = "MATRIX-Vision MV-Delta",
 445                 .video_inputs   = 5,
 446                 /* .audio_inputs= 1, */
 447                 .svhs           = 3,
 448                 .gpiomask       = 0,
 449                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 450                 .gpiomux        = { 0 },
 451                 .tuner_type     = TUNER_ABSENT,
 452                 .tuner_addr     = ADDR_UNSET,
 453         },
 454
 455         /* ---- card 0x08 ---------------------------------- */
 456         [BTTV_BOARD_FLYVIDEO] = {
 457                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 458                 .video_inputs   = 4,
 459                 /* .audio_inputs= 1, */
 460                 .svhs           = 2,
 461                 .gpiomask       = 0xc00,
 462                 .muxsel         = MUXSEL(2, 3, 1, 1),
 463                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 464                 .gpiomute       = 0xc00,
 465                 .pll            = PLL_28,
 466                 .tuner_type     = UNSET,
 467                 .tuner_addr     = ADDR_UNSET,
 468         },
 469         [BTTV_BOARD_TURBOTV] = {
 470                 .name           = "IMS/IXmicro TurboTV",
 471                 .video_inputs   = 3,
 472                 /* .audio_inputs= 1, */
 473                 .svhs           = 2,
 474                 .gpiomask       = 3,
 475                 .muxsel         = MUXSEL(2, 3, 1, 1),
 476                 .gpiomux        = { 1, 1, 2, 3 },
 477                 .pll            = PLL_28,
 478                 .tuner_type     = TUNER_TEMIC_PAL,
 479                 .tuner_addr     = ADDR_UNSET,
 480         },
 481         [BTTV_BOARD_HAUPPAUGE878] = {
 482                 .name           = "Hauppauge (bt878)",
 483                 .video_inputs   = 4,
 484                 /* .audio_inputs= 1, */
 485                 .svhs           = 2,
 486                 .gpiomask       = 0x0f, /* old: 7 */
 487                 .muxsel         = MUXSEL(2, 0, 1, 1),
 488                 .gpiomux        = { 0, 1, 2, 3 },
 489                 .gpiomute       = 4,
 490                 .pll            = PLL_28,
 491                 .tuner_type     = UNSET,
 492                 .tuner_addr     = ADDR_UNSET,
 493         },
 494         [BTTV_BOARD_MIROPRO] = {
 495                 .name           = "MIRO PCTV pro",
 496                 .video_inputs   = 3,
 497                 /* .audio_inputs= 1, */
 498                 .svhs           = 2,
 499                 .gpiomask       = 0x3014f,
 500                 .muxsel         = MUXSEL(2, 3, 1, 1),
 501                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 502                 .gpiomute       = 10,
 503                 .tuner_type     = UNSET,
 504                 .tuner_addr     = ADDR_UNSET,
 505         },
 506
 507         /* ---- card 0x0c ---------------------------------- */
 508         [BTTV_BOARD_ADSTECH_TV] = {
 509                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 510                 .video_inputs   = 3,
 511                 /* .audio_inputs= 1, */
 512                 .svhs           = 2,
 513                 .gpiomask       = 15,
 514                 .muxsel         = MUXSEL(2, 3, 1, 1),
 515                 .gpiomux        = { 13, 14, 11, 7 },
 516                 .tuner_type     = UNSET,
 517                 .tuner_addr     = ADDR_UNSET,
 518         },
 519         [BTTV_BOARD_AVERMEDIA98] = {
 520                 .name           = "AVerMedia TVCapture 98",
 521                 .video_inputs   = 3,
 522                 /* .audio_inputs= 4, */
 523                 .svhs           = 2,
 524                 .gpiomask       = 15,
 525                 .muxsel         = MUXSEL(2, 3, 1, 1),
 526                 .gpiomux        = { 13, 14, 11, 7 },
 527                 .msp34xx_alt    = 1,
 528                 .pll            = PLL_28,
 529                 .tuner_type     = TUNER_PHILIPS_PAL,
 530                 .tuner_addr     = ADDR_UNSET,
 531                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 532                 .no_gpioirq     = 1,
 533         },
 534         [BTTV_BOARD_VHX] = {
 535                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 536                 .video_inputs   = 3,
 537                 /* .audio_inputs= 1, */
 538                 .svhs           = 2,
 539                 .gpiomask       = 7,
 540                 .muxsel         = MUXSEL(2, 3, 1, 1),
 541                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 542                 .gpiomute       = 4,
 543                 .pll            = PLL_28,
 544                 .tuner_type     = UNSET,
 545                 .tuner_addr     = ADDR_UNSET,
 546         },
 547         [BTTV_BOARD_ZOLTRIX] = {
 548                 .name           = "Zoltrix TV-Max",
 549                 .video_inputs   = 3,
 550                 /* .audio_inputs= 1, */
 551                 .svhs           = 2,
 552                 .gpiomask       = 15,
 553                 .muxsel         = MUXSEL(2, 3, 1, 1),
 554                 .gpiomux        = { 0, 0, 1, 0 },
 555                 .gpiomute       = 10,
 556                 .tuner_type     = UNSET,
 557                 .tuner_addr     = ADDR_UNSET,
 558         },
 559
 560         /* ---- card 0x10 ---------------------------------- */
 561         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 562                 .name           = "Prolink Pixelview PlayTV (bt878)",
 563                 .video_inputs   = 3,
 564                 /* .audio_inputs= 1, */
 565                 .svhs           = 2,
 566                 .gpiomask       = 0x01fe00,
 567                 .muxsel         = MUXSEL(2, 3, 1, 1),
 568                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 569                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 570                 .gpiomute       = 0x002000,
 571                 .pll            = PLL_28,
 572                 .tuner_type     = UNSET,
 573                 .tuner_addr     = ADDR_UNSET,
 574         },
 575         [BTTV_BOARD_WINVIEW_601] = {
 576                 .name           = "Leadtek WinView 601",
 577                 .video_inputs   = 3,
 578                 /* .audio_inputs= 1, */
 579                 .svhs           = 2,
 580                 .gpiomask       = 0x8300f8,
 581                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 582                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 583                 .gpiomute       = 0xcfa007,
 584                 .tuner_type     = UNSET,
 585                 .tuner_addr     = ADDR_UNSET,
 586                 .volume_gpio    = winview_volume,
 587                 .has_radio      = 1,
 588         },
 589         [BTTV_BOARD_AVEC_INTERCAP] = {
 590                 .name           = "AVEC Intercapture",
 591                 .video_inputs   = 3,
 592                 /* .audio_inputs= 2, */
 593                 .svhs           = 2,
 594                 .gpiomask       = 0,
 595                 .muxsel         = MUXSEL(2, 3, 1, 1),
 596                 .gpiomux        = { 1, 0, 0, 0 },
 597                 .tuner_type     = UNSET,
 598                 .tuner_addr     = ADDR_UNSET,
 599         },
 600         [BTTV_BOARD_LIFE_FLYKIT] = {
 601                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 602                 .video_inputs   = 4,
 603                 /* .audio_inputs= 1, */
 604                 .svhs           = NO_SVHS,
 605                 .gpiomask       = 0x8dff00,
 606                 .muxsel         = MUXSEL(2, 3, 1, 1),
 607                 .gpiomux        = { 0 },
 608                 .no_msp34xx     = 1,
 609                 .tuner_type     = TUNER_ABSENT,
 610                 .tuner_addr     = ADDR_UNSET,
 611         },
 612
 613         /* ---- card 0x14 ---------------------------------- */
 614         [BTTV_BOARD_CEI_RAFFLES] = {
 615                 .name           = "CEI Raffles Card",
 616                 .video_inputs   = 3,
 617                 /* .audio_inputs= 3, */
 618                 .svhs           = 2,
 619                 .muxsel         = MUXSEL(2, 3, 1, 1),
 620                 .tuner_type     = UNSET,
 621                 .tuner_addr     = ADDR_UNSET,
 622         },
 623         [BTTV_BOARD_CONFERENCETV] = {
 624                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 625                 .video_inputs   = 4,
 626                 /* .audio_inputs= 2,  tuner, line in */
 627                 .svhs           = 2,
 628                 .gpiomask       = 0x1800,
 629                 .muxsel         = MUXSEL(2, 3, 1, 1),
 630                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 631                 .gpiomute       = 0x1800,
 632                 .pll            = PLL_28,
 633                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 634                 .tuner_addr     = ADDR_UNSET,
 635         },
 636         [BTTV_BOARD_PHOEBE_TVMAS] = {
 637                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 638                 .video_inputs   = 3,
 639                 /* .audio_inputs= 1, */
 640                 .svhs           = 2,
 641                 .gpiomask       = 0xc00,
 642                 .muxsel         = MUXSEL(2, 3, 1, 1),
 643                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 644                 .gpiomute       = 0xc00,
 645                 .pll            = PLL_28,
 646                 .tuner_type     = UNSET,
 647                 .tuner_addr     = ADDR_UNSET,
 648         },
 649         [BTTV_BOARD_MODTEC_205] = {
 650                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 651                 .video_inputs   = 3,
 652                 /* .audio_inputs= 1, */
 653                 .svhs           = NO_SVHS,
 654                 .has_dig_in     = 1,
 655                 .gpiomask       = 7,
 656                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 657                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
 658                 .gpiomux        = { 0, 0, 0, 0 },
 659                 .no_msp34xx     = 1,
 660                 .pll            = PLL_28,
 661                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 662                 .tuner_addr     = ADDR_UNSET,
 663         },
 664
 665         /* ---- card 0x18 ---------------------------------- */
 666         [BTTV_BOARD_MAGICTVIEW061] = {
 667                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 668                 .video_inputs   = 3,
 669                 /* .audio_inputs= 1, */
 670                 .svhs           = 2,
 671                 .gpiomask       = 0xe00,
 672                 .muxsel         = MUXSEL(2, 3, 1, 1),
 673                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 674                 .gpiomute       = 0xc00,
 675                 .pll            = PLL_28,
 676                 .tuner_type     = UNSET,
 677                 .tuner_addr     = ADDR_UNSET,
 678                 .has_remote     = 1,
 679                 .has_radio      = 1,  /* not every card has radio */
 680         },
 681         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 682                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 683                 .video_inputs   = 3,
 684                 /* .audio_inputs= 1, */
 685                 .svhs           = 2,
 686                 .gpiomask       = 0x1f0fff,
 687                 .muxsel         = MUXSEL(2, 3, 1, 1),
 688                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 689                 .gpiomute       = 0x40000,
 690                 .tuner_type     = TUNER_PHILIPS_PAL,
 691                 .tuner_addr     = ADDR_UNSET,
 692                 .audio_mode_gpio= terratv_audio,
 693         },
 694         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 695                 .name           = "Hauppauge WinCam newer (bt878)",
 696                 .video_inputs   = 4,
 697                 /* .audio_inputs= 1, */
 698                 .svhs           = 3,
 699                 .gpiomask       = 7,
 700                 .muxsel         = MUXSEL(2, 0, 1, 1),
 701                 .gpiomux        = { 0, 1, 2, 3 },
 702                 .gpiomute       = 4,
 703                 .tuner_type     = UNSET,
 704                 .tuner_addr     = ADDR_UNSET,
 705         },
 706         [BTTV_BOARD_MAXI] = {
 707                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 708                 .video_inputs   = 4,
 709                 /* .audio_inputs= 2, */
 710                 .svhs           = 2,
 711                 .gpiomask       = 0x1800,
 712                 .muxsel         = MUXSEL(2, 3, 1, 1),
 713                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 714                 .gpiomute       = 0x1800,
 715                 .pll            = PLL_28,
 716                 .tuner_type     = TUNER_PHILIPS_SECAM,
 717                 .tuner_addr     = ADDR_UNSET,
 718         },
 719
 720         /* ---- card 0x1c ---------------------------------- */
 721         [BTTV_BOARD_TERRATV] = {
 722                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 723                 .video_inputs   = 3,
 724                 /* .audio_inputs= 1, */
 725                 .svhs           = 2,
 726                 .gpiomask       = 0x1f0fff,
 727                 .muxsel         = MUXSEL(2, 3, 1, 1),
 728                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 729                 .gpiomute       = 0x40000,
 730                 .tuner_type     = TUNER_PHILIPS_PAL,
 731                 .tuner_addr     = ADDR_UNSET,
 732                 .audio_mode_gpio= terratv_audio,
 733                 /* GPIO wiring:
 734                 External 20 pin connector (for Active Radio Upgrade board)
 735                 gpio00: i2c-sda
 736                 gpio01: i2c-scl
 737                 gpio02: om5610-data
 738                 gpio03: om5610-clk
 739                 gpio04: om5610-wre
 740                 gpio05: om5610-stereo
 741                 gpio06: rds6588-davn
 742                 gpio07: Pin 7 n.c.
 743                 gpio08: nIOW
 744                 gpio09+10: nIOR, nSEL ?? (bt878)
 745                         gpio09: nIOR (bt848)
 746                         gpio10: nSEL (bt848)
 747                 Sound Routing:
 748                 gpio16: u2-A0 (1st 4052bt)
 749                 gpio17: u2-A1
 750                 gpio18: u2-nEN
 751                 gpio19: u4-A0 (2nd 4052)
 752                 gpio20: u4-A1
 753                         u4-nEN - GND
 754                 Btspy:
 755                         00000 : Cdrom (internal audio input)
 756                         10000 : ext. Video audio input
 757                         20000 : TV Mono
 758                         a0000 : TV Mono/2
 759                 1a0000 : TV Stereo
 760                         30000 : Radio
 761                         40000 : Mute
 762         */
 763
 764         },
 765         [BTTV_BOARD_PXC200] = {
 766                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 767                 .name           = "Imagenation PXC200",
 768                 .video_inputs   = 5,
 769                 /* .audio_inputs= 1, */
 770                 .svhs           = 1, /* was: 4 */
 771                 .gpiomask       = 0,
 772                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 773                 .gpiomux        = { 0 },
 774                 .tuner_type     = TUNER_ABSENT,
 775                 .tuner_addr     = ADDR_UNSET,
 776                 .muxsel_hook    = PXC200_muxsel,
 777
 778         },
 779         [BTTV_BOARD_FLYVIDEO_98] = {
 780                 .name           = "Lifeview FlyVideo 98 LR50",
 781                 .video_inputs   = 4,
 782                 /* .audio_inputs= 1, */
 783                 .svhs           = 2,
 784                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 785                 .muxsel         = MUXSEL(2, 3, 1, 1),
 786                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 787                 .gpiomute       = 0x1800,
 788                 .pll            = PLL_28,
 789                 .tuner_type     = UNSET,
 790                 .tuner_addr     = ADDR_UNSET,
 791         },
 792         [BTTV_BOARD_IPROTV] = {
 793                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 794                 .video_inputs   = 4,
 795                 /* .audio_inputs= 1, */
 796                 .svhs           = 3,
 797                 .gpiomask       = 1,
 798                 .muxsel         = MUXSEL(2, 3, 1, 1),
 799                 .gpiomux        = { 1, 0, 0, 0 },
 800                 .pll            = PLL_28,
 801                 .tuner_type     = TUNER_PHILIPS_PAL,
 802                 .tuner_addr     = ADDR_UNSET,
 803         },
 804
 805         /* ---- card 0x20 ---------------------------------- */
 806         [BTTV_BOARD_INTEL_C_S_PCI] = {
 807                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 808                 .video_inputs   = 4,
 809                 /* .audio_inputs= 0, */
 810                 .svhs           = 2,
 811                 .gpiomask       = 0,
 812                 .muxsel         = MUXSEL(2, 3, 1, 1),
 813                 .gpiomux        = { 0 },
 814                 .tuner_type     = TUNER_ABSENT,
 815                 .tuner_addr     = ADDR_UNSET,
 816         },
 817         [BTTV_BOARD_TERRATVALUE] = {
 818                 .name           = "Terratec TerraTValue Version Bt878",
 819                 .video_inputs   = 3,
 820                 /* .audio_inputs= 1, */
 821                 .svhs           = 2,
 822                 .gpiomask       = 0xffff00,
 823                 .muxsel         = MUXSEL(2, 3, 1, 1),
 824                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 825                 .gpiomute       = 0x900,
 826                 .pll            = PLL_28,
 827                 .tuner_type     = TUNER_PHILIPS_PAL,
 828                 .tuner_addr     = ADDR_UNSET,
 829         },
 830         [BTTV_BOARD_WINFAST2000] = {
 831                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 832                 .video_inputs   = 4,
 833                 /* .audio_inputs= 1, */
 834                 .svhs           = 2,
 835                 /* TV, CVid, SVid, CVid over SVid connector */
 836                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 837                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 838                 .gpiomask       = 0xb33000,
 839                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 840                 .gpiomute       = 0x800000,
 841                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 842                         gpio23 -- hef4052:nEnable (0x800000)
 843                         gpio12 -- hef4052:A1
 844                         gpio13 -- hef4052:A0
 845                 0x0000: external audio
 846                 0x1000: FM
 847                 0x2000: TV
 848                 0x3000: n.c.
 849                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 850                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 851                 */
 852                 .pll            = PLL_28,
 853                 .has_radio      = 1,
 854                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 855                 .tuner_addr     = ADDR_UNSET,
 856                 .audio_mode_gpio= winfast2000_audio,
 857                 .has_remote     = 1,
 858         },
 859         [BTTV_BOARD_CHRONOS_VS2] = {
 860                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 861                 .video_inputs   = 4,
 862                 /* .audio_inputs= 3, */
 863                 .svhs           = 2,
 864                 .gpiomask       = 0x1800,
 865                 .muxsel         = MUXSEL(2, 3, 1, 1),
 866                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 867                 .gpiomute       = 0x1800,
 868                 .pll            = PLL_28,
 869                 .tuner_type     = UNSET,
 870                 .tuner_addr     = ADDR_UNSET,
 871         },
 872
 873         /* ---- card 0x24 ---------------------------------- */
 874         [BTTV_BOARD_TYPHOON_TVIEW] = {
 875                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 876                 .video_inputs   = 4,
 877                 /* .audio_inputs= 3, */
 878                 .svhs           = 2,
 879                 .gpiomask       = 0x1800,
 880                 .muxsel         = MUXSEL(2, 3, 1, 1),
 881                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 882                 .gpiomute       = 0x1800,
 883                 .pll            = PLL_28,
 884                 .tuner_type     = UNSET,
 885                 .tuner_addr     = ADDR_UNSET,
 886                 .has_radio      = 1,
 887         },
 888         [BTTV_BOARD_PXELVWPLTVPRO] = {
 889                 .name           = "Prolink PixelView PlayTV pro",
 890                 .video_inputs   = 3,
 891                 /* .audio_inputs= 1, */
 892                 .svhs           = 2,
 893                 .gpiomask       = 0xff,
 894                 .muxsel         = MUXSEL(2, 3, 1, 1),
 895                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 896                 .gpiomute       = 0x29,
 897                 .no_msp34xx     = 1,
 898                 .pll            = PLL_28,
 899                 .tuner_type     = UNSET,
 900                 .tuner_addr     = ADDR_UNSET,
 901         },
 902         [BTTV_BOARD_MAGICTVIEW063] = {
 903                 .name           = "Askey CPH06X TView99",
 904                 .video_inputs   = 4,
 905                 /* .audio_inputs= 1, */
 906                 .svhs           = 2,
 907                 .gpiomask       = 0x551e00,
 908                 .muxsel         = MUXSEL(2, 3, 1, 0),
 909                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 910                 .gpiomute       = 0x551c00,
 911                 .pll            = PLL_28,
 912                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 913                 .tuner_addr     = ADDR_UNSET,
 914                 .has_remote     = 1,
 915         },
 916         [BTTV_BOARD_PINNACLE] = {
 917                 .name           = "Pinnacle PCTV Studio/Rave",
 918                 .video_inputs   = 3,
 919                 /* .audio_inputs= 1, */
 920                 .svhs           = 2,
 921                 .gpiomask       = 0x03000F,
 922                 .muxsel         = MUXSEL(2, 3, 1, 1),
 923                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 924                 .gpiomute       = 1,
 925                 .pll            = PLL_28,
 926                 .tuner_type     = UNSET,
 927                 .tuner_addr     = ADDR_UNSET,
 928         },
 929
 930         /* ---- card 0x28 ---------------------------------- */
 931         [BTTV_BOARD_STB2] = {
 932                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 933                 .video_inputs   = 3,
 934                 /* .audio_inputs= 1, */
 935                 .svhs           = 2,
 936                 .gpiomask       = 7,
 937                 .muxsel         = MUXSEL(2, 3, 1, 1),
 938                 .gpiomux        = { 4, 0, 2, 3 },
 939                 .gpiomute       = 1,
 940                 .no_msp34xx     = 1,
 941                 .tuner_type     = TUNER_PHILIPS_NTSC,
 942                 .tuner_addr     = ADDR_UNSET,
 943                 .pll            = PLL_28,
 944                 .has_radio      = 1,
 945         },
 946         [BTTV_BOARD_AVPHONE98] = {
 947                 .name           = "AVerMedia TVPhone 98",
 948                 .video_inputs   = 3,
 949                 /* .audio_inputs= 4, */
 950                 .svhs           = 2,
 951                 .gpiomask       = 15,
 952                 .muxsel         = MUXSEL(2, 3, 1, 1),
 953                 .gpiomux        = { 13, 4, 11, 7 },
 954                 .pll            = PLL_28,
 955                 .tuner_type     = UNSET,
 956                 .tuner_addr     = ADDR_UNSET,
 957                 .has_radio      = 1,
 958                 .audio_mode_gpio= avermedia_tvphone_audio,
 959         },
 960         [BTTV_BOARD_PV951] = {
 961                 .name           = "ProVideo PV951", /* pic16c54 */
 962                 .video_inputs   = 3,
 963                 /* .audio_inputs= 1, */
 964                 .svhs           = 2,
 965                 .gpiomask       = 0,
 966                 .muxsel         = MUXSEL(2, 3, 1, 1),
 967                 .gpiomux        = { 0, 0, 0, 0},
 968                 .no_msp34xx     = 1,
 969                 .pll            = PLL_28,
 970                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 971                 .tuner_addr     = ADDR_UNSET,
 972         },
 973         [BTTV_BOARD_ONAIR_TV] = {
 974                 .name           = "Little OnAir TV",
 975                 .video_inputs   = 3,
 976                 /* .audio_inputs= 1, */
 977                 .svhs           = 2,
 978                 .gpiomask       = 0xe00b,
 979                 .muxsel         = MUXSEL(2, 3, 1, 1),
 980                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 981                 .gpiomute       = 0xff3ffc,
 982                 .no_msp34xx     = 1,
 983                 .tuner_type     = UNSET,
 984                 .tuner_addr     = ADDR_UNSET,
 985         },
 986
 987         /* ---- card 0x2c ---------------------------------- */
 988         [BTTV_BOARD_SIGMA_TVII_FM] = {
 989                 .name           = "Sigma TVII-FM",
 990                 .video_inputs   = 2,
 991                 /* .audio_inputs= 1, */
 992                 .svhs           = NO_SVHS,
 993                 .gpiomask       = 3,
 994                 .muxsel         = MUXSEL(2, 3, 1, 1),
 995                 .gpiomux        = { 1, 1, 0, 2 },
 996                 .gpiomute       = 3,
 997                 .no_msp34xx     = 1,
 998                 .pll            = PLL_NONE,
 999                 .tuner_type     = UNSET,
1000                 .tuner_addr     = ADDR_UNSET,
1001         },
1002         [BTTV_BOARD_MATRIX_VISION2] = {
1003                 .name           = "MATRIX-Vision MV-Delta 2",
1004                 .video_inputs   = 5,
1005                 /* .audio_inputs= 1, */
1006                 .svhs           = 3,
1007                 .gpiomask       = 0,
1008                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1009                 .gpiomux        = { 0 },
1010                 .no_msp34xx     = 1,
1011                 .pll            = PLL_28,
1012                 .tuner_type     = TUNER_ABSENT,
1013                 .tuner_addr     = ADDR_UNSET,
1014         },
1015         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1016                 .name           = "Zoltrix Genie TV/FM",
1017                 .video_inputs   = 3,
1018                 /* .audio_inputs= 1, */
1019                 .svhs           = 2,
1020                 .gpiomask       = 0xbcf03f,
1021                 .muxsel         = MUXSEL(2, 3, 1, 1),
1022                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1023                 .gpiomute       = 0xbcb03f,
1024                 .no_msp34xx     = 1,
1025                 .pll            = PLL_28,
1026                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1027                 .tuner_addr     = ADDR_UNSET,
1028         },
1029         [BTTV_BOARD_TERRATVRADIO] = {
1030                 .name           = "Terratec TV/Radio+",
1031                 .video_inputs   = 3,
1032                 /* .audio_inputs= 1, */
1033                 .svhs           = 2,
1034                 .gpiomask       = 0x70000,
1035                 .muxsel         = MUXSEL(2, 3, 1, 1),
1036                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1037                 .gpiomute       = 0x40000,
1038                 .no_msp34xx     = 1,
1039                 .pll            = PLL_35,
1040                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1041                 .tuner_addr     = ADDR_UNSET,
1042                 .has_radio      = 1,
1043         },
1044
1045         /* ---- card 0x30 ---------------------------------- */
1046         [BTTV_BOARD_DYNALINK] = {
1047                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1048                 .video_inputs   = 3,
1049                 /* .audio_inputs= 1, */
1050                 .svhs           = 2,
1051                 .gpiomask       = 15,
1052                 .muxsel         = MUXSEL(2, 3, 1, 1),
1053                 .gpiomux        = {2,0,0,0 },
1054                 .gpiomute       = 1,
1055                 .pll            = PLL_28,
1056                 .tuner_type     = UNSET,
1057                 .tuner_addr     = ADDR_UNSET,
1058         },
1059         [BTTV_BOARD_GVBCTV3PCI] = {
1060                 .name           = "IODATA GV-BCTV3/PCI",
1061                 .video_inputs   = 3,
1062                 /* .audio_inputs= 1, */
1063                 .svhs           = 2,
1064                 .gpiomask       = 0x010f00,
1065                 .muxsel         = MUXSEL(2, 3, 0, 0),
1066                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1067                 .no_msp34xx     = 1,
1068                 .pll            = PLL_28,
1069                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1070                 .tuner_addr     = ADDR_UNSET,
1071                 .audio_mode_gpio= gvbctv3pci_audio,
1072         },
1073         [BTTV_BOARD_PXELVWPLTVPAK] = {
1074                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1075                 .video_inputs   = 5,
1076                 /* .audio_inputs= 1, */
1077                 .svhs           = 3,
1078                 .has_dig_in     = 1,
1079                 .gpiomask       = 0xAA0000,
1080                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1081                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1082                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1083                 .gpiomute       = 0xa8000,
1084                 .no_msp34xx     = 1,
1085                 .pll            = PLL_28,
1086                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1087                 .tuner_addr     = ADDR_UNSET,
1088                 .has_remote     = 1,
1089                 /* GPIO wiring: (different from Rev.4C !)
1090                         GPIO17: U4.A0 (first hef4052bt)
1091                         GPIO19: U4.A1
1092                         GPIO20: U5.A1 (second hef4052bt)
1093                         GPIO21: U4.nEN
1094                         GPIO22: BT832 Reset Line
1095                         GPIO23: A5,A0, U5,nEN
1096                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1097                 */
1098         },
1099         [BTTV_BOARD_EAGLE] = {
1100                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1101                 .video_inputs   = 4,
1102                 /* .audio_inputs= 1, */
1103                 .svhs           = 2,
1104                 .gpiomask       = 7,
1105                 .muxsel         = MUXSEL(2, 0, 1, 1),
1106                 .gpiomux        = { 0, 1, 2, 3 },
1107                 .gpiomute       = 4,
1108                 .pll            = PLL_28,
1109                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1110                 .tuner_addr     = ADDR_UNSET,
1111         },
1112
1113         /* ---- card 0x34 ---------------------------------- */
1114         [BTTV_BOARD_PINNACLEPRO] = {
1115                 /* David Härdeman <david@2gen.com> */
1116                 .name           = "Pinnacle PCTV Studio Pro",
1117                 .video_inputs   = 4,
1118                 /* .audio_inputs= 1, */
1119                 .svhs           = 3,
1120                 .gpiomask       = 0x03000F,
1121                 .muxsel         = MUXSEL(2, 3, 1, 1),
1122                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1123                 .gpiomute       = 10,
1124                                 /* sound path (5 sources):
1125                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1126                                         0= ext. Audio IN
1127                                         1= from MUX2
1128                                         2= Mono TV sound from Tuner
1129                                         3= not connected
1130                                 MUX2 (mask 0x30000):
1131                                         0,2,3= from MSP34xx
1132                                         1= FM stereo Radio from Tuner */
1133                 .pll            = PLL_28,
1134                 .tuner_type     = UNSET,
1135                 .tuner_addr     = ADDR_UNSET,
1136         },
1137         [BTTV_BOARD_TVIEW_RDS_FM] = {
1138                 /* Claas Langbehn <claas@bigfoot.com>,
1139                 Sven Grothklags <sven@upb.de> */
1140                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1141                 .video_inputs   = 4,
1142                 /* .audio_inputs= 3, */
1143                 .svhs           = 2,
1144                 .gpiomask       = 0x1c,
1145                 .muxsel         = MUXSEL(2, 3, 1, 1),
1146                 .gpiomux        = { 0, 0, 0x10, 8 },
1147                 .gpiomute       = 4,
1148                 .pll            = PLL_28,
1149                 .tuner_type     = TUNER_PHILIPS_PAL,
1150                 .tuner_addr     = ADDR_UNSET,
1151                 .has_radio      = 1,
1152         },
1153         [BTTV_BOARD_LIFETEC_9415] = {
1154                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1155                 in de.comp.os.unix.linux.hardware:
1156                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1157                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1158                         options tuner type=5 */
1159                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1160                 .video_inputs   = 4,
1161                 /* .audio_inputs= 1, */
1162                 .svhs           = 2,
1163                 .gpiomask       = 0x18e0,
1164                 .muxsel         = MUXSEL(2, 3, 1, 1),
1165                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1166                 .gpiomute       = 0x18e0,
1167                         /* For cards with tda9820/tda9821:
1168                                 0x0000: Tuner normal stereo
1169                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1170                                 0x0880: Tuner A2 stereo */
1171                 .pll            = PLL_28,
1172                 .tuner_type     = UNSET,
1173                 .tuner_addr     = ADDR_UNSET,
1174         },
1175         [BTTV_BOARD_BESTBUY_EASYTV] = {
1176                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1177                 old Easy TV BT848 version (model CPH031) */
1178                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1179                 .video_inputs   = 4,
1180                 /* .audio_inputs= 1, */
1181                 .svhs           = 2,
1182                 .gpiomask       = 0xF,
1183                 .muxsel         = MUXSEL(2, 3, 1, 0),
1184                 .gpiomux        = { 2, 0, 0, 0 },
1185                 .gpiomute       = 10,
1186                 .pll            = PLL_28,
1187                 .tuner_type     = TUNER_TEMIC_PAL,
1188                 .tuner_addr     = ADDR_UNSET,
1189         },
1190
1191         /* ---- card 0x38 ---------------------------------- */
1192         [BTTV_BOARD_FLYVIDEO_98FM] = {
1193                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1194                 .name           = "Lifeview FlyVideo 98FM LR50",
1195                 .video_inputs   = 4,
1196                 /* .audio_inputs= 3, */
1197                 .svhs           = 2,
1198                 .gpiomask       = 0x1800,
1199                 .muxsel         = MUXSEL(2, 3, 1, 1),
1200                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1201                 .gpiomute       = 0x1800,
1202                 .pll            = PLL_28,
1203                 .tuner_type     = TUNER_PHILIPS_PAL,
1204                 .tuner_addr     = ADDR_UNSET,
1205         },
1206                 /* This is the ultimate cheapo capture card
1207                 * just a BT848A on a small PCB!
1208                 * Steve Hosgood <steve@equiinet.com> */
1209         [BTTV_BOARD_GRANDTEC] = {
1210                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1211                 .video_inputs   = 2,
1212                 /* .audio_inputs= 0, */
1213                 .svhs           = 1,
1214                 .gpiomask       = 0,
1215                 .muxsel         = MUXSEL(3, 1),
1216                 .gpiomux        = { 0 },
1217                 .no_msp34xx     = 1,
1218                 .pll            = PLL_35,
1219                 .tuner_type     = TUNER_ABSENT,
1220                 .tuner_addr     = ADDR_UNSET,
1221         },
1222         [BTTV_BOARD_ASKEY_CPH060] = {
1223                 /* Daniel Herrington <daniel.herrington@home.com> */
1224                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1225                 .video_inputs   = 3,
1226                 /* .audio_inputs= 1, */
1227                 .svhs           = 2,
1228                 .gpiomask       = 0xe00,
1229                 .muxsel         = MUXSEL(2, 3, 1, 1),
1230                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1231                 .gpiomute       = 0x800,
1232                 .pll            = PLL_28,
1233                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1234                 .tuner_addr     = ADDR_UNSET,
1235         },
1236         [BTTV_BOARD_ASKEY_CPH03X] = {
1237                 /* Matti Mottus <mottus@physic.ut.ee> */
1238                 .name           = "Askey CPH03x TV Capturer",
1239                 .video_inputs   = 4,
1240                 /* .audio_inputs= 1, */
1241                 .svhs           = 2,
1242                 .gpiomask       = 0x03000F,
1243                 .muxsel         = MUXSEL(2, 3, 1, 0),
1244                 .gpiomux        = { 2, 0, 0, 0 },
1245                 .gpiomute       = 1,
1246                 .pll            = PLL_28,
1247                 .tuner_type     = TUNER_TEMIC_PAL,
1248                 .tuner_addr     = ADDR_UNSET,
1249                 .has_remote     = 1,
1250         },
1251
1252         /* ---- card 0x3c ---------------------------------- */
1253         [BTTV_BOARD_MM100PCTV] = {
1254                 /* Philip Blundell <philb@gnu.org> */
1255                 .name           = "Modular Technology MM100PCTV",
1256                 .video_inputs   = 2,
1257                 /* .audio_inputs= 2, */
1258                 .svhs           = NO_SVHS,
1259                 .gpiomask       = 11,
1260                 .muxsel         = MUXSEL(2, 3, 1, 1),
1261                 .gpiomux        = { 2, 0, 0, 1 },
1262                 .gpiomute       = 8,
1263                 .pll            = PLL_35,
1264                 .tuner_type     = TUNER_TEMIC_PAL,
1265                 .tuner_addr     = ADDR_UNSET,
1266         },
1267         [BTTV_BOARD_GMV1] = {
1268                 /* Adrian Cox <adrian@humboldt.co.uk */
1269                 .name           = "AG Electronics GMV1",
1270                 .video_inputs   = 2,
1271                 /* .audio_inputs= 0, */
1272                 .svhs           = 1,
1273                 .gpiomask       = 0xF,
1274                 .muxsel         = MUXSEL(2, 2),
1275                 .gpiomux        = { },
1276                 .no_msp34xx     = 1,
1277                 .pll            = PLL_28,
1278                 .tuner_type     = TUNER_ABSENT,
1279                 .tuner_addr     = ADDR_UNSET,
1280         },
1281         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1282                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1283                 new Easy TV BT878 version (model CPH061)
1284                 special thanks to Informatica Mieres for providing the card */
1285                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1286                 .video_inputs   = 3,
1287                 /* .audio_inputs= 2, */
1288                 .svhs           = 2,
1289                 .gpiomask       = 0xFF,
1290                 .muxsel         = MUXSEL(2, 3, 1, 0),
1291                 .gpiomux        = { 1, 0, 4, 4 },
1292                 .gpiomute       = 9,
1293                 .pll            = PLL_28,
1294                 .tuner_type     = TUNER_PHILIPS_PAL,
1295                 .tuner_addr     = ADDR_UNSET,
1296         },
1297         [BTTV_BOARD_ATI_TVWONDER] = {
1298                 /* Lukas Gebauer <geby@volny.cz> */
1299                 .name           = "ATI TV-Wonder",
1300                 .video_inputs   = 3,
1301                 /* .audio_inputs= 1, */
1302                 .svhs           = 2,
1303                 .gpiomask       = 0xf03f,
1304                 .muxsel         = MUXSEL(2, 3, 1, 0),
1305                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1306                 .gpiomute       = 0xbffe,
1307                 .pll            = PLL_28,
1308                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1309                 .tuner_addr     = ADDR_UNSET,
1310         },
1311
1312         /* ---- card 0x40 ---------------------------------- */
1313         [BTTV_BOARD_ATI_TVWONDERVE] = {
1314                 /* Lukas Gebauer <geby@volny.cz> */
1315                 .name           = "ATI TV-Wonder VE",
1316                 .video_inputs   = 2,
1317                 /* .audio_inputs= 1, */
1318                 .svhs           = NO_SVHS,
1319                 .gpiomask       = 1,
1320                 .muxsel         = MUXSEL(2, 3, 0, 1),
1321                 .gpiomux        = { 0, 0, 1, 0 },
1322                 .no_msp34xx     = 1,
1323                 .pll            = PLL_28,
1324                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1325                 .tuner_addr     = ADDR_UNSET,
1326         },
1327         [BTTV_BOARD_FLYVIDEO2000] = {
1328                 /* DeeJay <deejay@westel900.net (2000S) */
1329                 .name           = "Lifeview FlyVideo 2000S LR90",
1330                 .video_inputs   = 3,
1331                 /* .audio_inputs= 3, */
1332                 .svhs           = 2,
1333                 .gpiomask       = 0x18e0,
1334                 .muxsel         = MUXSEL(2, 3, 0, 1),
1335                                 /* Radio changed from 1e80 to 0x800 to make
1336                                 FlyVideo2000S in .hu happy (gm)*/
1337                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1338                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1339                 .gpiomute       = 0x1800,
1340                 .audio_mode_gpio= fv2000s_audio,
1341                 .no_msp34xx     = 1,
1342                 .pll            = PLL_28,
1343                 .tuner_type     = TUNER_PHILIPS_PAL,
1344                 .tuner_addr     = ADDR_UNSET,
1345         },
1346         [BTTV_BOARD_TERRATVALUER] = {
1347                 .name           = "Terratec TValueRadio",
1348                 .video_inputs   = 3,
1349                 /* .audio_inputs= 1, */
1350                 .svhs           = 2,
1351                 .gpiomask       = 0xffff00,
1352                 .muxsel         = MUXSEL(2, 3, 1, 1),
1353                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1354                 .gpiomute       = 0x900,
1355                 .pll            = PLL_28,
1356                 .tuner_type     = TUNER_PHILIPS_PAL,
1357                 .tuner_addr     = ADDR_UNSET,
1358                 .has_radio      = 1,
1359         },
1360         [BTTV_BOARD_GVBCTV4PCI] = {
1361                 /* TANAKA Kei <peg00625@nifty.com> */
1362                 .name           = "IODATA GV-BCTV4/PCI",
1363                 .video_inputs   = 3,
1364                 /* .audio_inputs= 1, */
1365                 .svhs           = 2,
1366                 .gpiomask       = 0x010f00,
1367                 .muxsel         = MUXSEL(2, 3, 0, 0),
1368                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1369                 .no_msp34xx     = 1,
1370                 .pll            = PLL_28,
1371                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1372                 .tuner_addr     = ADDR_UNSET,
1373                 .audio_mode_gpio= gvbctv3pci_audio,
1374         },
1375
1376         /* ---- card 0x44 ---------------------------------- */
1377         [BTTV_BOARD_VOODOOTV_FM] = {
1378                 .name           = "3Dfx VoodooTV FM (Euro)",
1379                 /* try "insmod msp3400 simple=0" if you have
1380                 * sound problems with this card. */
1381                 .video_inputs   = 4,
1382                 /* .audio_inputs= 1, */
1383                 .svhs           = NO_SVHS,
1384                 .gpiomask       = 0x4f8a00,
1385                 /* 0x100000: 1=MSP enabled (0=disable again)
1386                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1387                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1388                 .gpiomute       = 0x947fff,
1389                 /* tvtuner, radio,   external,internal, mute,  stereo
1390                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1391                 .muxsel         = MUXSEL(2, 3, 0, 1),
1392                 .tuner_type     = TUNER_MT2032,
1393                 .tuner_addr     = ADDR_UNSET,
1394                 .pll            = PLL_28,
1395                 .has_radio      = 1,
1396         },
1397         [BTTV_BOARD_VOODOOTV_200] = {
1398                 .name           = "VoodooTV 200 (USA)",
1399                 /* try "insmod msp3400 simple=0" if you have
1400                 * sound problems with this card. */
1401                 .video_inputs   = 4,
1402                 /* .audio_inputs= 1, */
1403                 .svhs           = NO_SVHS,
1404                 .gpiomask       = 0x4f8a00,
1405                 /* 0x100000: 1=MSP enabled (0=disable again)
1406                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1407                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1408                 .gpiomute       = 0x947fff,
1409                 /* tvtuner, radio,   external,internal, mute,  stereo
1410                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1411                 .muxsel         = MUXSEL(2, 3, 0, 1),
1412                 .tuner_type     = TUNER_MT2032,
1413                 .tuner_addr     = ADDR_UNSET,
1414                 .pll            = PLL_28,
1415                 .has_radio      = 1,
1416         },
1417         [BTTV_BOARD_AIMMS] = {
1418                 /* Philip Blundell <pb@nexus.co.uk> */
1419                 .name           = "Active Imaging AIMMS",
1420                 .video_inputs   = 1,
1421                 /* .audio_inputs= 0, */
1422                 .tuner_type     = TUNER_ABSENT,
1423                 .tuner_addr     = ADDR_UNSET,
1424                 .pll            = PLL_28,
1425                 .muxsel         = MUXSEL(2),
1426                 .gpiomask       = 0
1427         },
1428         [BTTV_BOARD_PV_BT878P_PLUS] = {
1429                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1430                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1431                 .video_inputs   = 3,
1432                 /* .audio_inputs= 4, */
1433                 .svhs           = 2,
1434                 .gpiomask       = 15,
1435                 .muxsel         = MUXSEL(2, 3, 1, 1),
1436                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1437                 .gpiomute       = 13,
1438                 .pll            = PLL_28,
1439                 .tuner_type     = TUNER_LG_PAL_I_FM,
1440                 .tuner_addr     = ADDR_UNSET,
1441                 .has_remote     = 1,
1442                 /* GPIO wiring:
1443                         GPIO0: U4.A0 (hef4052bt)
1444                         GPIO1: U4.A1
1445                         GPIO2: U4.A1 (second hef4052bt)
1446                         GPIO3: U4.nEN, U5.A0, A5.nEN
1447                         GPIO8-15: vrd866b ?
1448                 */
1449         },
1450         [BTTV_BOARD_FLYVIDEO98EZ] = {
1451                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1452                 .video_inputs   = 4,
1453                 /* .audio_inputs= 0, */
1454                 .svhs           = 2,
1455                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1456                 .muxsel         = MUXSEL(2, 3, 1, 1),
1457                 .pll            = PLL_28,
1458                 .no_msp34xx     = 1,
1459                 .tuner_type     = TUNER_ABSENT,
1460                 .tuner_addr     = ADDR_UNSET,
1461         },
1462
1463         /* ---- card 0x48 ---------------------------------- */
1464         [BTTV_BOARD_PV_BT878P_9B] = {
1465                 /* Dariusz Kowalewski <darekk@automex.pl> */
1466                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1467                 .video_inputs   = 4,
1468                 /* .audio_inputs= 1, */
1469                 .svhs           = 2,
1470                 .gpiomask       = 0x3f,
1471                 .muxsel         = MUXSEL(2, 3, 1, 1),
1472                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1473                 .gpiomute       = 0x09,
1474                 .no_msp34xx     = 1,
1475                 .pll            = PLL_28,
1476                 .tuner_type     = TUNER_PHILIPS_PAL,
1477                 .tuner_addr     = ADDR_UNSET,
1478                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1479                 .has_radio      = 1,  /* Note: not all cards have radio */
1480                 .has_remote     = 1,
1481                 /* GPIO wiring:
1482                         GPIO0: A0 hef4052
1483                         GPIO1: A1 hef4052
1484                         GPIO3: nEN hef4052
1485                         GPIO8-15: vrd866b
1486                         GPIO20,22,23: R30,R29,R28
1487                 */
1488         },
1489         [BTTV_BOARD_SENSORAY311_611] = {
1490                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1491                 /* you must jumper JP5 for the 311 card (PC/104+) to work */
1492                 .name           = "Sensoray 311/611",
1493                 .video_inputs   = 5,
1494                 /* .audio_inputs= 0, */
1495                 .svhs           = 4,
1496                 .gpiomask       = 0,
1497                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1498                 .gpiomux        = { 0 },
1499                 .tuner_type     = TUNER_ABSENT,
1500                 .tuner_addr     = ADDR_UNSET,
1501         },
1502         [BTTV_BOARD_RV605] = {
1503                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1504                 .name           = "RemoteVision MX (RV605)",
1505                 .video_inputs   = 16,
1506                 /* .audio_inputs= 0, */
1507                 .svhs           = NO_SVHS,
1508                 .gpiomask       = 0x00,
1509                 .gpiomask2      = 0x07ff,
1510                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1511                 .no_msp34xx     = 1,
1512                 .tuner_type     = TUNER_ABSENT,
1513                 .tuner_addr     = ADDR_UNSET,
1514                 .muxsel_hook    = rv605_muxsel,
1515         },
1516         [BTTV_BOARD_POWERCLR_MTV878] = {
1517                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1518                 .video_inputs   = 3,
1519                 /* .audio_inputs= 2, */
1520                 .svhs           = 2,
1521                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1522                 .muxsel         = MUXSEL(2, 1, 1),
1523                 .gpiomux        = { 0, 1, 2, 2 },
1524                 .gpiomute       = 4,
1525                 .tuner_type     = TUNER_PHILIPS_PAL,
1526                 .tuner_addr     = ADDR_UNSET,
1527                 .pll            = PLL_28,
1528                 .has_radio      = 1,
1529         },
1530
1531         /* ---- card 0x4c ---------------------------------- */
1532         [BTTV_BOARD_WINDVR] = {
1533                 /* Masaki Suzuki <masaki@btree.org> */
1534                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1535                 .video_inputs   = 3,
1536                 /* .audio_inputs= 1, */
1537                 .svhs           = 2,
1538                 .gpiomask       = 0x140007,
1539                 .muxsel         = MUXSEL(2, 3, 1, 1),
1540                 .gpiomux        = { 0, 1, 2, 3 },
1541                 .gpiomute       = 4,
1542                 .tuner_type     = TUNER_PHILIPS_NTSC,
1543                 .tuner_addr     = ADDR_UNSET,
1544                 .audio_mode_gpio= windvr_audio,
1545         },
1546         [BTTV_BOARD_GRANDTEC_MULTI] = {
1547                 .name           = "GrandTec Multi Capture Card (Bt878)",
1548                 .video_inputs   = 4,
1549                 /* .audio_inputs= 0, */
1550                 .svhs           = NO_SVHS,
1551                 .gpiomask       = 0,
1552                 .muxsel         = MUXSEL(2, 3, 1, 0),
1553                 .gpiomux        = { 0 },
1554                 .no_msp34xx     = 1,
1555                 .pll            = PLL_28,
1556                 .tuner_type     = TUNER_ABSENT,
1557                 .tuner_addr     = ADDR_UNSET,
1558         },
1559         [BTTV_BOARD_KWORLD] = {
1560                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1561                 .video_inputs   = 4,
1562                 /* .audio_inputs= 3, */
1563                 .svhs           = 2,
1564                 .gpiomask       = 7,
1565                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1566                 .muxsel         = MUXSEL(2, 3, 1, 1),
1567                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1568                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1569                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1570                                                 * This card lacks PCI subsystem ID, sigh.
1571                                                 * gpiomux =1: lower volume, 2+3: mute
1572                                                 * btwincap uses 0x80000/0x80003
1573                                                 */
1574                 .gpiomute       = 4,
1575                 .no_msp34xx     = 1,
1576                 .pll            = PLL_28,
1577                 .tuner_type     = TUNER_PHILIPS_PAL,
1578                 .tuner_addr     = ADDR_UNSET,
1579                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1580                 radio signal strength indicators work fine. */
1581                 .has_radio      = 1,
1582                 /* GPIO Info:
1583                         GPIO0,1:   HEF4052 A0,A1
1584                         GPIO2:     HEF4052 nENABLE
1585                         GPIO3-7:   n.c.
1586                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1587                         GPIO14,15: ??
1588                         GPIO16-21: n.c.
1589                         GPIO22,23: ??
1590                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1591         },
1592         [BTTV_BOARD_DSP_TCVIDEO] = {
1593                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1594                 .name           = "DSP Design TCVIDEO",
1595                 .video_inputs   = 4,
1596                 .svhs           = NO_SVHS,
1597                 .muxsel         = MUXSEL(2, 3, 1, 0),
1598                 .pll            = PLL_28,
1599                 .tuner_type     = UNSET,
1600                 .tuner_addr     = ADDR_UNSET,
1601         },
1602
1603                 /* ---- card 0x50 ---------------------------------- */
1604         [BTTV_BOARD_HAUPPAUGEPVR] = {
1605                 .name           = "Hauppauge WinTV PVR",
1606                 .video_inputs   = 4,
1607                 /* .audio_inputs= 1, */
1608                 .svhs           = 2,
1609                 .muxsel         = MUXSEL(2, 0, 1, 1),
1610                 .pll            = PLL_28,
1611                 .tuner_type     = UNSET,
1612                 .tuner_addr     = ADDR_UNSET,
1613
1614                 .gpiomask       = 7,
1615                 .gpiomux        = {7},
1616         },
1617         [BTTV_BOARD_GVBCTV5PCI] = {
1618                 .name           = "IODATA GV-BCTV5/PCI",
1619                 .video_inputs   = 3,
1620                 /* .audio_inputs= 1, */
1621                 .svhs           = 2,
1622                 .gpiomask       = 0x0f0f80,
1623                 .muxsel         = MUXSEL(2, 3, 1, 0),
1624                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1625                 .gpiomute       = 0x020000,
1626                 .no_msp34xx     = 1,
1627                 .pll            = PLL_28,
1628                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1629                 .tuner_addr     = ADDR_UNSET,
1630                 .audio_mode_gpio= gvbctv5pci_audio,
1631                 .has_radio      = 1,
1632         },
1633         [BTTV_BOARD_OSPREY1x0] = {
1634                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1635                 .video_inputs   = 4,                  /* id-inputs-clock */
1636                 /* .audio_inputs= 0, */
1637                 .svhs           = 3,
1638                 .muxsel         = MUXSEL(3, 2, 0, 1),
1639                 .pll            = PLL_28,
1640                 .tuner_type     = TUNER_ABSENT,
1641                 .tuner_addr     = ADDR_UNSET,
1642                 .no_msp34xx     = 1,
1643                 .no_tda7432     = 1,
1644         },
1645         [BTTV_BOARD_OSPREY1x0_848] = {
1646                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1647                 .video_inputs   = 3,
1648                 /* .audio_inputs= 0, */
1649                 .svhs           = 2,
1650                 .muxsel         = MUXSEL(2, 3, 1),
1651                 .pll            = PLL_28,
1652                 .tuner_type     = TUNER_ABSENT,
1653                 .tuner_addr     = ADDR_UNSET,
1654                 .no_msp34xx     = 1,
1655                 .no_tda7432     = 1,
1656         },
1657
1658                 /* ---- card 0x54 ---------------------------------- */
1659         [BTTV_BOARD_OSPREY101_848] = {
1660                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1661                 .video_inputs   = 2,
1662                 /* .audio_inputs= 0, */
1663                 .svhs           = 1,
1664                 .muxsel         = MUXSEL(3, 1),
1665                 .pll            = PLL_28,
1666                 .tuner_type     = TUNER_ABSENT,
1667                 .tuner_addr     = ADDR_UNSET,
1668                 .no_msp34xx     = 1,
1669                 .no_tda7432     = 1,
1670         },
1671         [BTTV_BOARD_OSPREY1x1] = {
1672                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1673                 .video_inputs   = 1,
1674                 /* .audio_inputs= 0, */
1675                 .svhs           = NO_SVHS,
1676                 .muxsel         = MUXSEL(0),
1677                 .pll            = PLL_28,
1678                 .tuner_type     = TUNER_ABSENT,
1679                 .tuner_addr     = ADDR_UNSET,
1680                 .no_msp34xx     = 1,
1681                 .no_tda7432     = 1,
1682         },
1683         [BTTV_BOARD_OSPREY1x1_SVID] = {
1684                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1685                 .video_inputs   = 2,
1686                 /* .audio_inputs= 0, */
1687                 .svhs           = 1,
1688                 .muxsel         = MUXSEL(0, 1),
1689                 .pll            = PLL_28,
1690                 .tuner_type     = TUNER_ABSENT,
1691                 .tuner_addr     = ADDR_UNSET,
1692                 .no_msp34xx     = 1,
1693                 .no_tda7432     = 1,
1694         },
1695         [BTTV_BOARD_OSPREY2xx] = {
1696                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1697                 .video_inputs   = 1,
1698                 /* .audio_inputs= 1, */
1699                 .svhs           = NO_SVHS,
1700                 .muxsel         = MUXSEL(0),
1701                 .pll            = PLL_28,
1702                 .tuner_type     = TUNER_ABSENT,
1703                 .tuner_addr     = ADDR_UNSET,
1704                 .no_msp34xx     = 1,
1705                 .no_tda7432     = 1,
1706         },
1707
1708                 /* ---- card 0x58 ---------------------------------- */
1709         [BTTV_BOARD_OSPREY2x0_SVID] = {
1710                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1711                 .video_inputs   = 2,
1712                 /* .audio_inputs= 1, */
1713                 .svhs           = 1,
1714                 .muxsel         = MUXSEL(0, 1),
1715                 .pll            = PLL_28,
1716                 .tuner_type     = TUNER_ABSENT,
1717                 .tuner_addr     = ADDR_UNSET,
1718                 .no_msp34xx     = 1,
1719                 .no_tda7432     = 1,
1720         },
1721         [BTTV_BOARD_OSPREY2x0] = {
1722                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1723                 .video_inputs   = 2,
1724                 /* .audio_inputs= 1, */
1725                 .svhs           = 1,
1726                 .muxsel         = MUXSEL(2, 3),
1727                 .pll            = PLL_28,
1728                 .tuner_type     = TUNER_ABSENT,
1729                 .tuner_addr     = ADDR_UNSET,
1730                 .no_msp34xx     = 1,
1731                 .no_tda7432     = 1,
1732         },
1733         [BTTV_BOARD_OSPREY500] = {
1734                 .name           = "Osprey 500",   /* 500 */
1735                 .video_inputs   = 2,
1736                 /* .audio_inputs= 1, */
1737                 .svhs           = 1,
1738                 .muxsel         = MUXSEL(2, 3),
1739                 .pll            = PLL_28,
1740                 .tuner_type     = TUNER_ABSENT,
1741                 .tuner_addr     = ADDR_UNSET,
1742                 .no_msp34xx     = 1,
1743                 .no_tda7432     = 1,
1744         },
1745         [BTTV_BOARD_OSPREY540] = {
1746                 .name           = "Osprey 540",   /* 540 */
1747                 .video_inputs   = 4,
1748                 /* .audio_inputs= 1, */
1749                 .pll            = PLL_28,
1750                 .tuner_type     = TUNER_ABSENT,
1751                 .tuner_addr     = ADDR_UNSET,
1752                 .no_msp34xx     = 1,
1753                 .no_tda7432     = 1,
1754         },
1755
1756                 /* ---- card 0x5C ---------------------------------- */
1757         [BTTV_BOARD_OSPREY2000] = {
1758                 .name           = "Osprey 2000",  /* 2000 */
1759                 .video_inputs   = 2,
1760                 /* .audio_inputs= 1, */
1761                 .svhs           = 1,
1762                 .muxsel         = MUXSEL(2, 3),
1763                 .pll            = PLL_28,
1764                 .tuner_type     = TUNER_ABSENT,
1765                 .tuner_addr     = ADDR_UNSET,
1766                 .no_msp34xx     = 1,
1767                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1768         },
1769         [BTTV_BOARD_IDS_EAGLE] = {
1770                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1771                 .name           = "IDS Eagle",
1772                 .video_inputs   = 4,
1773                 /* .audio_inputs= 0, */
1774                 .tuner_type     = TUNER_ABSENT,
1775                 .tuner_addr     = ADDR_UNSET,
1776                 .svhs           = NO_SVHS,
1777                 .gpiomask       = 0,
1778                 .muxsel         = MUXSEL(2, 2, 2, 2),
1779                 .muxsel_hook    = eagle_muxsel,
1780                 .no_msp34xx     = 1,
1781                 .pll            = PLL_28,
1782         },
1783         [BTTV_BOARD_PINNACLESAT] = {
1784                 .name           = "Pinnacle PCTV Sat",
1785                 .video_inputs   = 2,
1786                 /* .audio_inputs= 0, */
1787                 .svhs           = 1,
1788                 .tuner_type     = TUNER_ABSENT,
1789                 .tuner_addr     = ADDR_UNSET,
1790                 .no_msp34xx     = 1,
1791                 .no_tda7432     = 1,
1792                 .muxsel         = MUXSEL(3, 1),
1793                 .pll            = PLL_28,
1794                 .no_gpioirq     = 1,
1795                 .has_dvb        = 1,
1796         },
1797         [BTTV_BOARD_FORMAC_PROTV] = {
1798                 .name           = "Formac ProTV II (bt878)",
1799                 .video_inputs   = 4,
1800                 /* .audio_inputs= 1, */
1801                 .svhs           = 3,
1802                 .gpiomask       = 2,
1803                 /* TV, Comp1, Composite over SVID con, SVID */
1804                 .muxsel         = MUXSEL(2, 3, 1, 1),
1805                 .gpiomux        = { 2, 2, 0, 0 },
1806                 .pll            = PLL_28,
1807                 .has_radio      = 1,
1808                 .tuner_type     = TUNER_PHILIPS_PAL,
1809                 .tuner_addr     = ADDR_UNSET,
1810         /* sound routing:
1811                 GPIO=0x00,0x01,0x03: mute (?)
1812                 0x02: both TV and radio (tuner: FM1216/I)
1813                 The card has onboard audio connectors labeled "cdrom" and "board",
1814                 not soldered here, though unknown wiring.
1815                 Card lacks: external audio in, pci subsystem id.
1816         */
1817         },
1818
1819                 /* ---- card 0x60 ---------------------------------- */
1820         [BTTV_BOARD_MACHTV] = {
1821                 .name           = "MachTV",
1822                 .video_inputs   = 3,
1823                 /* .audio_inputs= 1, */
1824                 .svhs           = NO_SVHS,
1825                 .gpiomask       = 7,
1826                 .muxsel         = MUXSEL(2, 3, 1, 1),
1827                 .gpiomux        = { 0, 1, 2, 3},
1828                 .gpiomute       = 4,
1829                 .tuner_type     = TUNER_PHILIPS_PAL,
1830                 .tuner_addr     = ADDR_UNSET,
1831                 .pll            = PLL_28,
1832         },
1833         [BTTV_BOARD_EURESYS_PICOLO] = {
1834                 .name           = "Euresys Picolo",
1835                 .video_inputs   = 3,
1836                 /* .audio_inputs= 0, */
1837                 .svhs           = 2,
1838                 .gpiomask       = 0,
1839                 .no_msp34xx     = 1,
1840                 .no_tda7432     = 1,
1841                 .muxsel         = MUXSEL(2, 0, 1),
1842                 .pll            = PLL_28,
1843                 .tuner_type     = TUNER_ABSENT,
1844                 .tuner_addr     = ADDR_UNSET,
1845         },
1846         [BTTV_BOARD_PV150] = {
1847                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1848                 .name           = "ProVideo PV150", /* 0x4f */
1849                 .video_inputs   = 2,
1850                 /* .audio_inputs= 0, */
1851                 .svhs           = NO_SVHS,
1852                 .gpiomask       = 0,
1853                 .muxsel         = MUXSEL(2, 3),
1854                 .gpiomux        = { 0 },
1855                 .no_msp34xx     = 1,
1856                 .pll            = PLL_28,
1857                 .tuner_type     = TUNER_ABSENT,
1858                 .tuner_addr     = ADDR_UNSET,
1859         },
1860         [BTTV_BOARD_AD_TVK503] = {
1861                 /* Hiroshi Takekawa <sian@big.or.jp> */
1862                 /* This card lacks subsystem ID */
1863                 .name           = "AD-TVK503", /* 0x63 */
1864                 .video_inputs   = 4,
1865                 /* .audio_inputs= 1, */
1866                 .svhs           = 2,
1867                 .gpiomask       = 0x001e8007,
1868                 .muxsel         = MUXSEL(2, 3, 1, 0),
1869                 /*                  Tuner, Radio, external, internal, off,  on */
1870                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1871                 .gpiomute       = 0x0f,
1872                 .no_msp34xx     = 1,
1873                 .pll            = PLL_28,
1874                 .tuner_type     = TUNER_PHILIPS_NTSC,
1875                 .tuner_addr     = ADDR_UNSET,
1876                 .audio_mode_gpio= adtvk503_audio,
1877         },
1878
1879                 /* ---- card 0x64 ---------------------------------- */
1880         [BTTV_BOARD_HERCULES_SM_TV] = {
1881                 .name           = "Hercules Smart TV Stereo",
1882                 .video_inputs   = 4,
1883                 /* .audio_inputs= 1, */
1884                 .svhs           = 2,
1885                 .gpiomask       = 0x00,
1886                 .muxsel         = MUXSEL(2, 3, 1, 1),
1887                 .no_msp34xx     = 1,
1888                 .pll            = PLL_28,
1889                 .tuner_type     = TUNER_PHILIPS_PAL,
1890                 .tuner_addr     = ADDR_UNSET,
1891                 /* Notes:
1892                 - card lacks subsystem ID
1893                 - stereo variant w/ daughter board with tda9874a @0xb0
1894                 - Audio Routing:
1895                         always from tda9874 independent of GPIO (?)
1896                         external line in: unknown
1897                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1898                         hef4053 (instead 4052) for unknown function
1899                 */
1900         },
1901         [BTTV_BOARD_PACETV] = {
1902                 .name           = "Pace TV & Radio Card",
1903                 .video_inputs   = 4,
1904                 /* .audio_inputs= 1, */
1905                 .svhs           = 2,
1906                 /* Tuner, CVid, SVid, CVid over SVid connector */
1907                 .muxsel         = MUXSEL(2, 3, 1, 1),
1908                 .gpiomask       = 0,
1909                 .no_tda7432     = 1,
1910                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1911                 .tuner_addr     = ADDR_UNSET,
1912                 .has_radio      = 1,
1913                 .pll            = PLL_28,
1914                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1915                 only internal line out: (4pin header) RGGL
1916                 Radio must be decoded by msp3410d (not routed through)*/
1917                 /*
1918                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1919                 */
1920         },
1921         [BTTV_BOARD_IVC200] = {
1922                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1923                 .name           = "IVC-200",
1924                 .video_inputs   = 1,
1925                 /* .audio_inputs= 0, */
1926                 .tuner_type     = TUNER_ABSENT,
1927                 .tuner_addr     = ADDR_UNSET,
1928                 .svhs           = NO_SVHS,
1929                 .gpiomask       = 0xdf,
1930                 .muxsel         = MUXSEL(2),
1931                 .pll            = PLL_28,
1932         },
1933         [BTTV_BOARD_IVCE8784] = {
1934                 .name           = "IVCE-8784",
1935                 .video_inputs   = 1,
1936                 /* .audio_inputs= 0, */
1937                 .tuner_type     = TUNER_ABSENT,
1938                 .tuner_addr     = ADDR_UNSET,
1939                 .svhs           = NO_SVHS,
1940                 .gpiomask       = 0xdf,
1941                 .muxsel         = MUXSEL(2),
1942                 .pll            = PLL_28,
1943         },
1944         [BTTV_BOARD_XGUARD] = {
1945                 .name           = "Grand X-Guard / Trust 814PCI",
1946                 .video_inputs   = 16,
1947                 /* .audio_inputs= 0, */
1948                 .svhs           = NO_SVHS,
1949                 .tuner_type     = TUNER_ABSENT,
1950                 .tuner_addr     = ADDR_UNSET,
1951                 .gpiomask2      = 0xff,
1952                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1953                 .muxsel_hook    = xguard_muxsel,
1954                 .no_msp34xx     = 1,
1955                 .no_tda7432     = 1,
1956                 .pll            = PLL_28,
1957         },
1958
1959                 /* ---- card 0x68 ---------------------------------- */
1960         [BTTV_BOARD_NEBULA_DIGITV] = {
1961                 .name           = "Nebula Electronics DigiTV",
1962                 .video_inputs   = 1,
1963                 .svhs           = NO_SVHS,
1964                 .muxsel         = MUXSEL(2, 3, 1, 0),
1965                 .no_msp34xx     = 1,
1966                 .no_tda7432     = 1,
1967                 .pll            = PLL_28,
1968                 .tuner_type     = TUNER_ABSENT,
1969                 .tuner_addr     = ADDR_UNSET,
1970                 .has_dvb        = 1,
1971                 .has_remote     = 1,
1972                 .gpiomask       = 0x1b,
1973                 .no_gpioirq     = 1,
1974         },
1975         [BTTV_BOARD_PV143] = {
1976                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1977                 .name           = "ProVideo PV143",
1978                 .video_inputs   = 4,
1979                 /* .audio_inputs= 0, */
1980                 .svhs           = NO_SVHS,
1981                 .gpiomask       = 0,
1982                 .muxsel         = MUXSEL(2, 3, 1, 0),
1983                 .gpiomux        = { 0 },
1984                 .no_msp34xx     = 1,
1985                 .pll            = PLL_28,
1986                 .tuner_type     = TUNER_ABSENT,
1987                 .tuner_addr     = ADDR_UNSET,
1988         },
1989         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1990                 /* M.Klahr@phytec.de */
1991                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1992                 .video_inputs   = 4,
1993                 /* .audio_inputs= 0, */
1994                 .svhs           = 3,
1995                 .gpiomask       = 0x00,
1996                 .muxsel         = MUXSEL(2, 3, 1, 0),
1997                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1998                 .pll            = PLL_28,
1999                 .tuner_type     = TUNER_ABSENT,
2000                 .tuner_addr     = ADDR_UNSET,
2001         },
2002         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2003                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2004                 .video_inputs   = 4,
2005                 /* .audio_inputs= 0, */
2006                 .svhs           = 3,
2007                 .gpiomask       = 0x00,
2008                 .muxsel         = MUXSEL(2, 3, 1, 1),
2009                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2010                 .pll            = PLL_28,
2011                 .tuner_type     = TUNER_ABSENT,
2012                 .tuner_addr     = ADDR_UNSET,
2013         },
2014
2015                 /* ---- card 0x6c ---------------------------------- */
2016         [BTTV_BOARD_VD009_MINIDIN] = {
2017                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2018                 .video_inputs   = 10,
2019                 /* .audio_inputs= 0, */
2020                 .svhs           = 9,
2021                 .gpiomask       = 0x00,
2022                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2023                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2024                 .muxsel_hook    = phytec_muxsel,
2025                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2026                 .pll            = PLL_28,
2027                 .tuner_type     = TUNER_ABSENT,
2028                 .tuner_addr     = ADDR_UNSET,
2029         },
2030         [BTTV_BOARD_VD009_COMBI] = {
2031                 .name           = "PHYTEC VD-009 Combi (bt878)",
2032                 .video_inputs   = 10,
2033                 /* .audio_inputs= 0, */
2034                 .svhs           = 9,
2035                 .gpiomask       = 0x00,
2036                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2037                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2038                 .muxsel_hook    = phytec_muxsel,
2039                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2040                 .pll            = PLL_28,
2041                 .tuner_type     = TUNER_ABSENT,
2042                 .tuner_addr     = ADDR_UNSET,
2043         },
2044         [BTTV_BOARD_IVC100] = {
2045                 .name           = "IVC-100",
2046                 .video_inputs   = 4,
2047                 /* .audio_inputs= 0, */
2048                 .tuner_type     = TUNER_ABSENT,
2049                 .tuner_addr     = ADDR_UNSET,
2050                 .svhs           = NO_SVHS,
2051                 .gpiomask       = 0xdf,
2052                 .muxsel         = MUXSEL(2, 3, 1, 0),
2053                 .pll            = PLL_28,
2054         },
2055         [BTTV_BOARD_IVC120] = {
2056                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2057                 .name           = "IVC-120G",
2058                 .video_inputs   = 16,
2059                 /* .audio_inputs= 0, */
2060                 .tuner_type     = TUNER_ABSENT,
2061                 .tuner_addr     = ADDR_UNSET,
2062                 .svhs           = NO_SVHS,   /* card has no svhs */
2063                 .no_msp34xx     = 1,
2064                 .no_tda7432     = 1,
2065                 .gpiomask       = 0x00,
2066                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2067                 .muxsel_hook    = ivc120_muxsel,
2068                 .pll            = PLL_28,
2069         },
2070
2071                 /* ---- card 0x70 ---------------------------------- */
2072         [BTTV_BOARD_PC_HDTV] = {
2073                 .name           = "pcHDTV HD-2000 TV",
2074                 .video_inputs   = 4,
2075                 /* .audio_inputs= 1, */
2076                 .svhs           = 2,
2077                 .muxsel         = MUXSEL(2, 3, 1, 0),
2078                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2079                 .tuner_addr     = ADDR_UNSET,
2080                 .has_dvb        = 1,
2081         },
2082         [BTTV_BOARD_TWINHAN_DST] = {
2083                 .name           = "Twinhan DST + clones",
2084                 .no_msp34xx     = 1,
2085                 .no_tda7432     = 1,
2086                 .tuner_type     = TUNER_ABSENT,
2087                 .tuner_addr     = ADDR_UNSET,
2088                 .no_video       = 1,
2089                 .has_dvb        = 1,
2090         },
2091         [BTTV_BOARD_WINFASTVC100] = {
2092                 .name           = "Winfast VC100",
2093                 .video_inputs   = 3,
2094                 /* .audio_inputs= 0, */
2095                 .svhs           = 1,
2096                 /* Vid In, SVid In, Vid over SVid in connector */
2097                 .muxsel         = MUXSEL(3, 1, 1, 3),
2098                 .no_msp34xx     = 1,
2099                 .no_tda7432     = 1,
2100                 .tuner_type     = TUNER_ABSENT,
2101                 .tuner_addr     = ADDR_UNSET,
2102                 .pll            = PLL_28,
2103         },
2104         [BTTV_BOARD_TEV560] = {
2105                 .name           = "Teppro TEV-560/InterVision IV-560",
2106                 .video_inputs   = 3,
2107                 /* .audio_inputs= 1, */
2108                 .svhs           = 2,
2109                 .gpiomask       = 3,
2110                 .muxsel         = MUXSEL(2, 3, 1, 1),
2111                 .gpiomux        = { 1, 1, 1, 1 },
2112                 .tuner_type     = TUNER_PHILIPS_PAL,
2113                 .tuner_addr     = ADDR_UNSET,
2114                 .pll            = PLL_35,
2115         },
2116
2117                 /* ---- card 0x74 ---------------------------------- */
2118         [BTTV_BOARD_SIMUS_GVC1100] = {
2119                 .name           = "SIMUS GVC1100",
2120                 .video_inputs   = 4,
2121                 /* .audio_inputs= 0, */
2122                 .svhs           = NO_SVHS,
2123                 .tuner_type     = TUNER_ABSENT,
2124                 .tuner_addr     = ADDR_UNSET,
2125                 .pll            = PLL_28,
2126                 .muxsel         = MUXSEL(2, 2, 2, 2),
2127                 .gpiomask       = 0x3F,
2128                 .muxsel_hook    = gvc1100_muxsel,
2129         },
2130         [BTTV_BOARD_NGSTV_PLUS] = {
2131                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2132                 .name           = "NGS NGSTV+",
2133                 .video_inputs   = 3,
2134                 .svhs           = 2,
2135                 .gpiomask       = 0x008007,
2136                 .muxsel         = MUXSEL(2, 3, 0, 0),
2137                 .gpiomux        = { 0, 0, 0, 0 },
2138                 .gpiomute       = 0x000003,
2139                 .pll            = PLL_28,
2140                 .tuner_type     = TUNER_PHILIPS_PAL,
2141                 .tuner_addr     = ADDR_UNSET,
2142                 .has_remote     = 1,
2143         },
2144         [BTTV_BOARD_LMLBT4] = {
2145                 /* http://linuxmedialabs.com */
2146                 .name           = "LMLBT4",
2147                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2148                 /* .audio_inputs= 0, */
2149                 .svhs           = NO_SVHS,
2150                 .muxsel         = MUXSEL(2, 3, 1, 0),
2151                 .no_msp34xx     = 1,
2152                 .no_tda7432     = 1,
2153                 .tuner_type     = TUNER_ABSENT,
2154                 .tuner_addr     = ADDR_UNSET,
2155         },
2156         [BTTV_BOARD_TEKRAM_M205] = {
2157                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2158                 .name           = "Tekram M205 PRO",
2159                 .video_inputs   = 3,
2160                 /* .audio_inputs= 1, */
2161                 .tuner_type     = TUNER_PHILIPS_PAL,
2162                 .tuner_addr     = ADDR_UNSET,
2163                 .svhs           = 2,
2164                 .gpiomask       = 0x68,
2165                 .muxsel         = MUXSEL(2, 3, 1),
2166                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2167                 .pll            = PLL_28,
2168         },
2169
2170                 /* ---- card 0x78 ---------------------------------- */
2171         [BTTV_BOARD_CONTVFMI] = {
2172                 /* Javier Cendan Ares <jcendan@lycos.es> */
2173                 /* bt878 TV + FM without subsystem ID */
2174                 .name           = "Conceptronic CONTVFMi",
2175                 .video_inputs   = 3,
2176                 /* .audio_inputs= 1, */
2177                 .svhs           = 2,
2178                 .gpiomask       = 0x008007,
2179                 .muxsel         = MUXSEL(2, 3, 1, 1),
2180                 .gpiomux        = { 0, 1, 2, 2 },
2181                 .gpiomute       = 3,
2182                 .pll            = PLL_28,
2183                 .tuner_type     = TUNER_PHILIPS_PAL,
2184                 .tuner_addr     = ADDR_UNSET,
2185                 .has_remote     = 1,
2186                 .has_radio      = 1,
2187         },
2188         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2189                 /*Eric DEBIEF <debief@telemsa.com>*/
2190                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2191                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2192                 /*0x79 in bttv.h*/
2193                 .name           = "Euresys Picolo Tetra",
2194                 .video_inputs   = 4,
2195                 /* .audio_inputs= 0, */
2196                 .svhs           = NO_SVHS,
2197                 .gpiomask       = 0,
2198                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2199                 .no_msp34xx     = 1,
2200                 .no_tda7432     = 1,
2201                 /*878A input is always MUX0, see above.*/
2202                 .muxsel         = MUXSEL(2, 2, 2, 2),
2203                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2204                 .pll            = PLL_28,
2205                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2206                 .tuner_type     = TUNER_ABSENT,
2207                 .tuner_addr     = ADDR_UNSET,
2208         },
2209         [BTTV_BOARD_SPIRIT_TV] = {
2210                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2211                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2212                 .name           = "Spirit TV Tuner",
2213                 .video_inputs   = 3,
2214                 /* .audio_inputs= 1, */
2215                 .svhs           = 2,
2216                 .gpiomask       = 0x0000000f,
2217                 .muxsel         = MUXSEL(2, 1, 1),
2218                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2219                 .tuner_type     = TUNER_TEMIC_PAL,
2220                 .tuner_addr     = ADDR_UNSET,
2221                 .no_msp34xx     = 1,
2222         },
2223         [BTTV_BOARD_AVDVBT_771] = {
2224                 /* Wolfram Joost <wojo@frokaschwei.de> */
2225                 .name           = "AVerMedia AVerTV DVB-T 771",
2226                 .video_inputs   = 2,
2227                 .svhs           = 1,
2228                 .tuner_type     = TUNER_ABSENT,
2229                 .tuner_addr     = ADDR_UNSET,
2230                 .muxsel         = MUXSEL(3, 3),
2231                 .no_msp34xx     = 1,
2232                 .no_tda7432     = 1,
2233                 .pll            = PLL_28,
2234                 .has_dvb        = 1,
2235                 .no_gpioirq     = 1,
2236                 .has_remote     = 1,
2237         },
2238                 /* ---- card 0x7c ---------------------------------- */
2239         [BTTV_BOARD_AVDVBT_761] = {
2240                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2241                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2242                 .name           = "AverMedia AverTV DVB-T 761",
2243                 .video_inputs   = 2,
2244                 .svhs           = 1,
2245                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2246                 .no_msp34xx     = 1,
2247                 .no_tda7432     = 1,
2248                 .pll            = PLL_28,
2249                 .tuner_type     = TUNER_ABSENT,
2250                 .tuner_addr     = ADDR_UNSET,
2251                 .has_dvb        = 1,
2252                 .no_gpioirq     = 1,
2253                 .has_remote     = 1,
2254         },
2255         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2256                 /* andre.schwarz@matrix-vision.de */
2257                 .name           = "MATRIX Vision Sigma-SQ",
2258                 .video_inputs   = 16,
2259                 /* .audio_inputs= 0, */
2260                 .svhs           = NO_SVHS,
2261                 .gpiomask       = 0x0,
2262                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2263                 .muxsel_hook    = sigmaSQ_muxsel,
2264                 .gpiomux        = { 0 },
2265                 .no_msp34xx     = 1,
2266                 .pll            = PLL_28,
2267                 .tuner_type     = TUNER_ABSENT,
2268                 .tuner_addr     = ADDR_UNSET,
2269         },
2270         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2271                 /* andre.schwarz@matrix-vision.de */
2272                 .name           = "MATRIX Vision Sigma-SLC",
2273                 .video_inputs   = 4,
2274                 /* .audio_inputs= 0, */
2275                 .svhs           = NO_SVHS,
2276                 .gpiomask       = 0x0,
2277                 .muxsel         = MUXSEL(2, 2, 2, 2),
2278                 .muxsel_hook    = sigmaSLC_muxsel,
2279                 .gpiomux        = { 0 },
2280                 .no_msp34xx     = 1,
2281                 .pll            = PLL_28,
2282                 .tuner_type     = TUNER_ABSENT,
2283                 .tuner_addr     = ADDR_UNSET,
2284         },
2285                 /* BTTV_BOARD_APAC_VIEWCOMP */
2286         [BTTV_BOARD_APAC_VIEWCOMP] = {
2287                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2288                 /* bt878 TV + FM 0x00000000 subsystem ID */
2289                 .name           = "APAC Viewcomp 878(AMAX)",
2290                 .video_inputs   = 2,
2291                 /* .audio_inputs= 1, */
2292                 .svhs           = NO_SVHS,
2293                 .gpiomask       = 0xFF,
2294                 .muxsel         = MUXSEL(2, 3, 1, 1),
2295                 .gpiomux        = { 2, 0, 0, 0 },
2296                 .gpiomute       = 10,
2297                 .pll            = PLL_28,
2298                 .tuner_type     = TUNER_PHILIPS_PAL,
2299                 .tuner_addr     = ADDR_UNSET,
2300                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2301                 .has_radio      = 1,   /* not every card has radio */
2302         },
2303
2304                 /* ---- card 0x80 ---------------------------------- */
2305         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2306                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2307                 .name           = "DViCO FusionHDTV DVB-T Lite",
2308                 .no_msp34xx     = 1,
2309                 .no_tda7432     = 1,
2310                 .pll            = PLL_28,
2311                 .no_video       = 1,
2312                 .has_dvb        = 1,
2313                 .tuner_type     = TUNER_ABSENT,
2314                 .tuner_addr     = ADDR_UNSET,
2315         },
2316         [BTTV_BOARD_VGEAR_MYVCD] = {
2317                 /* Steven <photon38@pchome.com.tw> */
2318                 .name           = "V-Gear MyVCD",
2319                 .video_inputs   = 3,
2320                 /* .audio_inputs= 1, */
2321                 .svhs           = 2,
2322                 .gpiomask       = 0x3f,
2323                 .muxsel         = MUXSEL(2, 3, 1, 0),
2324                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2325                 .gpiomute       = 0x31,
2326                 .no_msp34xx     = 1,
2327                 .pll            = PLL_28,
2328                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2329                 .tuner_addr     = ADDR_UNSET,
2330                 .has_radio      = 0,
2331         },
2332         [BTTV_BOARD_SUPER_TV] = {
2333                 /* Rick C <cryptdragoon@gmail.com> */
2334                 .name           = "Super TV Tuner",
2335                 .video_inputs   = 4,
2336                 /* .audio_inputs= 1, */
2337                 .svhs           = 2,
2338                 .muxsel         = MUXSEL(2, 3, 1, 0),
2339                 .tuner_type     = TUNER_PHILIPS_NTSC,
2340                 .tuner_addr     = ADDR_UNSET,
2341                 .gpiomask       = 0x008007,
2342                 .gpiomux        = { 0, 0x000001,0,0 },
2343                 .has_radio      = 1,
2344         },
2345         [BTTV_BOARD_TIBET_CS16] = {
2346                 /* Chris Fanning <video4linux@haydon.net> */
2347                 .name           = "Tibet Systems 'Progress DVR' CS16",
2348                 .video_inputs   = 16,
2349                 /* .audio_inputs= 0, */
2350                 .svhs           = NO_SVHS,
2351                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2352                 .pll            = PLL_28,
2353                 .no_msp34xx     = 1,
2354                 .no_tda7432     = 1,
2355                 .tuner_type     = TUNER_ABSENT,
2356                 .tuner_addr     = ADDR_UNSET,
2357                 .muxsel_hook    = tibetCS16_muxsel,
2358         },
2359         [BTTV_BOARD_KODICOM_4400R] = {
2360                 /* Bill Brack <wbrack@mmm.com.hk> */
2361                 /*
2362                 * Note that, because of the card's wiring, the "master"
2363                 * BT878A chip (i.e. the one which controls the analog switch
2364                 * and must use this card type) is the 2nd one detected.  The
2365                 * other 3 chips should use card type 0x85, whose description
2366                 * follows this one.  There is a EEPROM on the card (which is
2367                 * connected to the I2C of one of those other chips), but is
2368                 * not currently handled.  There is also a facility for a
2369                 * "monitor", which is also not currently implemented.
2370                 */
2371                 .name           = "Kodicom 4400R (master)",
2372                 .video_inputs   = 16,
2373                 /* .audio_inputs= 0, */
2374                 .tuner_type     = TUNER_ABSENT,
2375                 .tuner_addr     = ADDR_UNSET,
2376                 .svhs           = NO_SVHS,
2377                 /* GPIO bits 0-9 used for analog switch:
2378                 *   00 - 03:    camera selector
2379                 *   04 - 06:    channel (controller) selector
2380                 *   07: data (1->on, 0->off)
2381                 *   08: strobe
2382                 *   09: reset
2383                 * bit 16 is input from sync separator for the channel
2384                 */
2385                 .gpiomask       = 0x0003ff,
2386                 .no_gpioirq     = 1,
2387                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2388                 .pll            = PLL_28,
2389                 .no_msp34xx     = 1,
2390                 .no_tda7432     = 1,
2391                 .muxsel_hook    = kodicom4400r_muxsel,
2392         },
2393         [BTTV_BOARD_KODICOM_4400R_SL] = {
2394                 /* Bill Brack <wbrack@mmm.com.hk> */
2395                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2396                 * one which controls the analog switch, and must use the card type)
2397                 * is the 2nd one detected.  The other 3 chips should use this card
2398                 * type
2399                 */
2400                 .name           = "Kodicom 4400R (slave)",
2401                 .video_inputs   = 16,
2402                 /* .audio_inputs= 0, */
2403                 .tuner_type     = TUNER_ABSENT,
2404                 .tuner_addr     = ADDR_UNSET,
2405                 .svhs           = NO_SVHS,
2406                 .gpiomask       = 0x010000,
2407                 .no_gpioirq     = 1,
2408                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2409                 .pll            = PLL_28,
2410                 .no_msp34xx     = 1,
2411                 .no_tda7432     = 1,
2412                 .muxsel_hook    = kodicom4400r_muxsel,
2413         },
2414                 /* ---- card 0x86---------------------------------- */
2415         [BTTV_BOARD_ADLINK_RTV24] = {
2416                 /* Michael Henson <mhenson@clarityvi.com> */
2417                 /* Adlink RTV24 with special unlock codes */
2418                 .name           = "Adlink RTV24",
2419                 .video_inputs   = 4,
2420                 /* .audio_inputs= 1, */
2421                 .svhs           = 2,
2422                 .muxsel         = MUXSEL(2, 3, 1, 0),
2423                 .tuner_type     = UNSET,
2424                 .tuner_addr     = ADDR_UNSET,
2425                 .pll            = PLL_28,
2426         },
2427                 /* ---- card 0x87---------------------------------- */
2428         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2429                 /* Michael Krufky <mkrufky@m1k.net> */
2430                 .name           = "DViCO FusionHDTV 5 Lite",
2431                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2432                 .tuner_addr     = ADDR_UNSET,
2433                 .video_inputs   = 3,
2434                 /* .audio_inputs= 1, */
2435                 .svhs           = 2,
2436                 .muxsel         = MUXSEL(2, 3, 1),
2437                 .gpiomask       = 0x00e00007,
2438                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2439                 .gpiomute       = 0x00c00007,
2440                 .no_msp34xx     = 1,
2441                 .no_tda7432     = 1,
2442                 .has_dvb        = 1,
2443         },
2444                 /* ---- card 0x88---------------------------------- */
2445         [BTTV_BOARD_ACORP_Y878F] = {
2446                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2447                 .name           = "Acorp Y878F",
2448                 .video_inputs   = 3,
2449                 /* .audio_inputs= 1, */
2450                 .svhs           = 2,
2451                 .gpiomask       = 0x01fe00,
2452                 .muxsel         = MUXSEL(2, 3, 1, 1),
2453                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2454                 .gpiomute       = 0x002000,
2455                 .pll            = PLL_28,
2456                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2457                 .tuner_addr     = 0xc1 >>1,
2458                 .has_radio      = 1,
2459         },
2460                 /* ---- card 0x89 ---------------------------------- */
2461         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2462                 .name           = "Conceptronic CTVFMi v2",
2463                 .video_inputs   = 3,
2464                 /* .audio_inputs= 1, */
2465                 .svhs           = 2,
2466                 .gpiomask       = 0x001c0007,
2467                 .muxsel         = MUXSEL(2, 3, 1, 1),
2468                 .gpiomux        = { 0, 1, 2, 2 },
2469                 .gpiomute       = 3,
2470                 .pll            = PLL_28,
2471                 .tuner_type     = TUNER_TENA_9533_DI,
2472                 .tuner_addr     = ADDR_UNSET,
2473                 .has_remote     = 1,
2474                 .has_radio      = 1,
2475         },
2476                 /* ---- card 0x8a ---------------------------------- */
2477         [BTTV_BOARD_PV_BT878P_2E] = {
2478                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2479                 .video_inputs   = 5,
2480                 /* .audio_inputs= 1, */
2481                 .svhs           = 3,
2482                 .has_dig_in     = 1,
2483                 .gpiomask       = 0x01fe00,
2484                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2485                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2486                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2487                 .gpiomute       = 0x12400,
2488                 .no_msp34xx     = 1,
2489                 .pll            = PLL_28,
2490                 .tuner_type     = TUNER_LG_PAL_FM,
2491                 .tuner_addr     = ADDR_UNSET,
2492                 .has_remote     = 1,
2493         },
2494                 /* ---- card 0x8b ---------------------------------- */
2495         [BTTV_BOARD_PV_M4900] = {
2496                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2497                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2498                 .video_inputs   = 3,
2499                 /* .audio_inputs= 1, */
2500                 .svhs           = 2,
2501                 .gpiomask       = 0x3f,
2502                 .muxsel         = MUXSEL(2, 3, 1, 1),
2503                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2504                 .gpiomute       = 0x29,
2505                 .no_msp34xx     = 1,
2506                 .pll            = PLL_28,
2507                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2508                 .tuner_addr     = ADDR_UNSET,
2509                 .has_radio      = 1,
2510                 .has_remote     = 1,
2511         },
2512                 /* ---- card 0x8c ---------------------------------- */
2513         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2514              one external BNC composite input (mux 2)
2515              three internal composite inputs (unknown muxes)
2516              an 18-bit stereo A/D (CS5331A), which has:
2517                one external stereo unblanced (RCA) audio connection
2518                one (or 3?) internal stereo balanced (XLR) audio connection
2519                input is selected via gpio to a 14052B mux
2520                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2521                gain is controlled via an X9221A chip on the I2C bus @0x28
2522                sample rate is controlled via gpio to an MK1413S
2523                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2524              There is neither a tuner nor an svideo input. */
2525         [BTTV_BOARD_OSPREY440]  = {
2526                 .name           = "Osprey 440",
2527                 .video_inputs   = 4,
2528                 /* .audio_inputs= 2, */
2529                 .svhs           = NO_SVHS,
2530                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2531                 .gpiomask       = 0x303,
2532                 .gpiomute       = 0x000, /* int + 32kHz */
2533                 .gpiomux        = { 0, 0, 0x000, 0x100},
2534                 .pll            = PLL_28,
2535                 .tuner_type     = TUNER_ABSENT,
2536                 .tuner_addr     = ADDR_UNSET,
2537                 .no_msp34xx     = 1,
2538                 .no_tda7432     = 1,
2539         },
2540                 /* ---- card 0x8d ---------------------------------- */
2541         [BTTV_BOARD_ASOUND_SKYEYE] = {
2542                 .name           = "Asound Skyeye PCTV",
2543                 .video_inputs   = 3,
2544                 /* .audio_inputs= 1, */
2545                 .svhs           = 2,
2546                 .gpiomask       = 15,
2547                 .muxsel         = MUXSEL(2, 3, 1, 1),
2548                 .gpiomux        = { 2, 0, 0, 0 },
2549                 .gpiomute       = 1,
2550                 .pll            = PLL_28,
2551                 .tuner_type     = TUNER_PHILIPS_NTSC,
2552                 .tuner_addr     = ADDR_UNSET,
2553         },
2554                 /* ---- card 0x8e ---------------------------------- */
2555         [BTTV_BOARD_SABRENT_TVFM] = {
2556                 .name           = "Sabrent TV-FM (bttv version)",
2557                 .video_inputs   = 3,
2558                 /* .audio_inputs= 1, */
2559                 .svhs           = 2,
2560                 .gpiomask       = 0x108007,
2561                 .muxsel         = MUXSEL(2, 3, 1, 1),
2562                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2563                 .no_msp34xx     = 1,
2564                 .no_tda7432     = 1,
2565                 .pll            = PLL_28,
2566                 .tuner_type     = TUNER_TNF_5335MF,
2567                 .tuner_addr     = ADDR_UNSET,
2568                 .has_radio      = 1,
2569         },
2570         /* ---- card 0x8f ---------------------------------- */
2571         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2572                 .name           = "Hauppauge ImpactVCB (bt878)",
2573                 .video_inputs   = 4,
2574                 /* .audio_inputs= 0, */
2575                 .svhs           = NO_SVHS,
2576                 .gpiomask       = 0x0f, /* old: 7 */
2577                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2578                 .no_msp34xx     = 1,
2579                 .no_tda7432     = 1,
2580                 .tuner_type     = TUNER_ABSENT,
2581                 .tuner_addr     = ADDR_UNSET,
2582         },
2583         [BTTV_BOARD_MACHTV_MAGICTV] = {
2584                 /* Julian Calaby <julian.calaby@gmail.com>
2585                  * Slightly different from original MachTV definition (0x60)
2586
2587                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2588                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2589                  * properly (methinks) causing no keyup bits being set */
2590
2591                 .name           = "MagicTV", /* rebranded MachTV */
2592                 .video_inputs   = 3,
2593                 /* .audio_inputs= 1, */
2594                 .svhs           = 2,
2595                 .gpiomask       = 7,
2596                 .muxsel         = MUXSEL(2, 3, 1, 1),
2597                 .gpiomux        = { 0, 1, 2, 3 },
2598                 .gpiomute       = 4,
2599                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2600                 .tuner_addr     = ADDR_UNSET,
2601                 .pll            = PLL_28,
2602                 .has_radio      = 1,
2603                 .has_remote     = 1,
2604         },
2605         [BTTV_BOARD_SSAI_SECURITY] = {
2606                 .name           = "SSAI Security Video Interface",
2607                 .video_inputs   = 4,
2608                 /* .audio_inputs= 0, */
2609                 .svhs           = NO_SVHS,
2610                 .muxsel         = MUXSEL(0, 1, 2, 3),
2611                 .tuner_type     = TUNER_ABSENT,
2612                 .tuner_addr     = ADDR_UNSET,
2613         },
2614         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2615                 .name           = "SSAI Ultrasound Video Interface",
2616                 .video_inputs   = 2,
2617                 /* .audio_inputs= 0, */
2618                 .svhs           = 1,
2619                 .muxsel         = MUXSEL(2, 0, 1, 3),
2620                 .tuner_type     = TUNER_ABSENT,
2621                 .tuner_addr     = ADDR_UNSET,
2622         },
2623         /* ---- card 0x94---------------------------------- */
2624         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2625                 .name           = "DViCO FusionHDTV 2",
2626                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2627                 .tuner_addr     = ADDR_UNSET,
2628                 .video_inputs   = 3,
2629                 /* .audio_inputs= 1, */
2630                 .svhs           = 2,
2631                 .muxsel         = MUXSEL(2, 3, 1),
2632                 .gpiomask       = 0x00e00007,
2633                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2634                 .gpiomute       = 0x00c00007,
2635                 .no_msp34xx     = 1,
2636                 .no_tda7432     = 1,
2637         },
2638         /* ---- card 0x95---------------------------------- */
2639         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2640                 .name           = "Typhoon TV-Tuner PCI (50684)",
2641                 .video_inputs   = 3,
2642                 /* .audio_inputs= 1, */
2643                 .svhs           = 2,
2644                 .gpiomask       = 0x3014f,
2645                 .muxsel         = MUXSEL(2, 3, 1, 1),
2646                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2647                 .gpiomute       = 10,
2648                 .pll            = PLL_28,
2649                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2650                 .tuner_addr     = ADDR_UNSET,
2651         },
2652         [BTTV_BOARD_GEOVISION_GV600] = {
2653                 /* emhn@usb.ve */
2654                 .name           = "Geovision GV-600",
2655                 .video_inputs   = 16,
2656                 /* .audio_inputs= 0, */
2657                 .svhs           = NO_SVHS,
2658                 .gpiomask       = 0x0,
2659                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2660                 .muxsel_hook    = geovision_muxsel,
2661                 .gpiomux        = { 0 },
2662                 .no_msp34xx     = 1,
2663                 .pll            = PLL_28,
2664                 .tuner_type     = TUNER_ABSENT,
2665                 .tuner_addr     = ADDR_UNSET,
2666         },
2667         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2668                 /* Mauro Lacy <mauro@lacy.com.ar>
2669                  * Based on MagicTV and Conceptronic CONTVFMi */
2670
2671                 .name           = "Kozumi KTV-01C",
2672                 .video_inputs   = 3,
2673                 /* .audio_inputs= 1, */
2674                 .svhs           = 2,
2675                 .gpiomask       = 0x008007,
2676                 .muxsel         = MUXSEL(2, 3, 1, 1),
2677                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2678                 .gpiomute       = 3, /* CONTVFMi */
2679                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2680                 .tuner_addr     = ADDR_UNSET,
2681                 .pll            = PLL_28,
2682                 .has_radio      = 1,
2683                 .has_remote     = 1,
2684         },
2685         [BTTV_BOARD_ENLTV_FM_2] = {
2686                 /* Encore TV Tuner Pro ENL TV-FM-2
2687                    Mauro Carvalho Chehab <mchehab@infradead.org */
2688                 .name           = "Encore ENL TV-FM-2",
2689                 .video_inputs   = 3,
2690                 /* .audio_inputs= 1, */
2691                 .svhs           = 2,
2692                 /* bit 6          -> IR disabled
2693                    bit 18/17 = 00 -> mute
2694                                01 -> enable external audio input
2695                                10 -> internal audio input (mono?)
2696                                11 -> internal audio input
2697                  */
2698                 .gpiomask       = 0x060040,
2699                 .muxsel         = MUXSEL(2, 3, 3),
2700                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2701                 .gpiomute       = 0,
2702                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2703                 .tuner_addr     = ADDR_UNSET,
2704                 .pll            = PLL_28,
2705                 .has_radio      = 1,
2706                 .has_remote     = 1,
2707         },
2708                 [BTTV_BOARD_VD012] = {
2709                 /* D.Heer@Phytec.de */
2710                 .name           = "PHYTEC VD-012 (bt878)",
2711                 .video_inputs   = 4,
2712                 /* .audio_inputs= 0, */
2713                 .svhs           = NO_SVHS,
2714                 .gpiomask       = 0x00,
2715                 .muxsel         = MUXSEL(0, 2, 3, 1),
2716                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2717                 .pll            = PLL_28,
2718                 .tuner_type     = TUNER_ABSENT,
2719                 .tuner_addr     = ADDR_UNSET,
2720         },
2721                 [BTTV_BOARD_VD012_X1] = {
2722                 /* D.Heer@Phytec.de */
2723                 .name           = "PHYTEC VD-012-X1 (bt878)",
2724                 .video_inputs   = 4,
2725                 /* .audio_inputs= 0, */
2726                 .svhs           = 3,
2727                 .gpiomask       = 0x00,
2728                 .muxsel         = MUXSEL(2, 3, 1),
2729                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2730                 .pll            = PLL_28,
2731                 .tuner_type     = TUNER_ABSENT,
2732                 .tuner_addr     = ADDR_UNSET,
2733         },
2734                 [BTTV_BOARD_VD012_X2] = {
2735                 /* D.Heer@Phytec.de */
2736                 .name           = "PHYTEC VD-012-X2 (bt878)",
2737                 .video_inputs   = 4,
2738                 /* .audio_inputs= 0, */
2739                 .svhs           = 3,
2740                 .gpiomask       = 0x00,
2741                 .muxsel         = MUXSEL(3, 2, 1),
2742                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2743                 .pll            = PLL_28,
2744                 .tuner_type     = TUNER_ABSENT,
2745                 .tuner_addr     = ADDR_UNSET,
2746         },
2747                 [BTTV_BOARD_GEOVISION_GV800S] = {
2748                 /* Bruno Christo <bchristo@inf.ufsm.br>
2749                  *
2750                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2751                  *      1 audio input  per BT878A = 4 audio inputs
2752                  *      4 video inputs per BT878A = 16 video inputs
2753                  * This is the first BT878A chip of the GV-800(S). It's the
2754                  * "master" chip and it controls the video inputs through an
2755                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2756                  * slaves should use card type 0x9e (following this one).
2757                  * There is a EEPROM on the card which is currently not handled.
2758                  * The audio input is not working yet.
2759                  */
2760                 .name           = "Geovision GV-800(S) (master)",
2761                 .video_inputs   = 4,
2762                 /* .audio_inputs= 1, */
2763                 .tuner_type     = TUNER_ABSENT,
2764                 .tuner_addr     = ADDR_UNSET,
2765                 .svhs           = NO_SVHS,
2766                 .gpiomask       = 0xf107f,
2767                 .no_gpioirq     = 1,
2768                 .muxsel         = MUXSEL(2, 2, 2, 2),
2769                 .pll            = PLL_28,
2770                 .no_msp34xx     = 1,
2771                 .no_tda7432     = 1,
2772                 .muxsel_hook    = gv800s_muxsel,
2773         },
2774                 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2775                 /* Bruno Christo <bchristo@inf.ufsm.br>
2776                  *
2777                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2778                  *      1 audio input  per BT878A = 4 audio inputs
2779                  *      4 video inputs per BT878A = 16 video inputs
2780                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2781                  * and should use this card type.
2782                  * The audio input is not working yet.
2783                  */
2784                 .name           = "Geovision GV-800(S) (slave)",
2785                 .video_inputs   = 4,
2786                 /* .audio_inputs= 1, */
2787                 .tuner_type     = TUNER_ABSENT,
2788                 .tuner_addr     = ADDR_UNSET,
2789                 .svhs           = NO_SVHS,
2790                 .gpiomask       = 0x00,
2791                 .no_gpioirq     = 1,
2792                 .muxsel         = MUXSEL(2, 2, 2, 2),
2793                 .pll            = PLL_28,
2794                 .no_msp34xx     = 1,
2795                 .no_tda7432     = 1,
2796                 .muxsel_hook    = gv800s_muxsel,
2797         },
2798         [BTTV_BOARD_PV183] = {
2799                 .name           = "ProVideo PV183", /* 0x9f */
2800                 .video_inputs   = 2,
2801                 /* .audio_inputs= 0, */
2802                 .svhs           = NO_SVHS,
2803                 .gpiomask       = 0,
2804                 .muxsel         = MUXSEL(2, 3),
2805                 .gpiomux        = { 0 },
2806                 .no_msp34xx     = 1,
2807                 .pll            = PLL_28,
2808                 .tuner_type     = TUNER_ABSENT,
2809                 .tuner_addr     = ADDR_UNSET,
2810         },
2811         [BTTV_BOARD_TVT_TD3116] = {
2812                 .name           = "Tongwei Video Technology TD-3116",
2813                 .video_inputs   = 16,
2814                 .gpiomask       = 0xc00ff,
2815                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2816                 .muxsel_hook    = td3116_muxsel,
2817                 .svhs           = NO_SVHS,
2818                 .pll            = PLL_28,
2819                 .tuner_type     = TUNER_ABSENT,
2820         },
2821         [BTTV_BOARD_APOSONIC_WDVR] = {
2822                 .name           = "Aposonic W-DVR",
2823                 .video_inputs   = 4,
2824                 .svhs           = NO_SVHS,
2825                 .muxsel         = MUXSEL(2, 3, 1, 0),
2826                 .tuner_type     = TUNER_ABSENT,
2827         },
2828
2829 };
2830
2831 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2832
2833 /* ----------------------------------------------------------------------- */
2834
2835 static unsigned char eeprom_data[256];
2836
2837 /*
2838  * identify card
2839  */
2840 void __devinit bttv_idcard(struct bttv *btv)
2841 {
2842         unsigned int gpiobits;
2843         int i,type;
2844
2845         /* read PCI subsystem ID */
2846         btv->cardid  = btv->c.pci->subsystem_device << 16;
2847         btv->cardid |= btv->c.pci->subsystem_vendor;
2848
2849         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2850                 /* look for the card */
2851                 for (type = -1, i = 0; cards[i].id != 0; i++)
2852                         if (cards[i].id  == btv->cardid)
2853                                 type = i;
2854
2855                 if (type != -1) {
2856                         /* found it */
2857                         pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2858                                 btv->c.nr, cards[type].name, cards[type].cardnr,
2859                                 btv->cardid & 0xffff,
2860                                 (btv->cardid >> 16) & 0xffff);
2861                         btv->c.type = cards[type].cardnr;
2862                 } else {
2863                         /* 404 */
2864                         pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2865                                 btv->c.nr, btv->cardid & 0xffff,
2866                                 (btv->cardid >> 16) & 0xffff);
2867                         pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2868                 }
2869         }
2870
2871         /* let the user override the autodetected type */
2872         if (card[btv->c.nr] < bttv_num_tvcards)
2873                 btv->c.type=card[btv->c.nr];
2874
2875         /* print which card config we are using */
2876         pr_info("%d: using: %s [card=%d,%s]\n",
2877                 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2878                 card[btv->c.nr] < bttv_num_tvcards
2879                 ? "insmod option" : "autodetected");
2880
2881         /* overwrite gpio stuff ?? */
2882         if (UNSET == audioall && UNSET == audiomux[0])
2883                 return;
2884
2885         if (UNSET != audiomux[0]) {
2886                 gpiobits = 0;
2887                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2888                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2889                         gpiobits |= audiomux[i];
2890                 }
2891         } else {
2892                 gpiobits = audioall;
2893                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2894                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2895                 }
2896         }
2897         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2898         pr_info("%d: gpio config override: mask=0x%x, mux=",
2899                 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2900         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2901                 pr_cont("%s0x%x",
2902                         i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2903         }
2904         pr_cont("\n");
2905 }
2906
2907 /*
2908  * (most) board specific initialisations goes here
2909  */
2910
2911 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2912 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2913 {
2914         int type = -1;
2915
2916         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2917                 type = BTTV_BOARD_MODTEC_205;
2918         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2919                 type = BTTV_BOARD_EURESYS_PICOLO;
2920         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2921                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2922
2923         if (-1 != type) {
2924                 btv->c.type = type;
2925                 pr_info("%d: detected by eeprom: %s [card=%d]\n",
2926                         btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2927         }
2928 }
2929
2930 static void flyvideo_gpio(struct bttv *btv)
2931 {
2932         int gpio, has_remote, has_radio, is_capture_only;
2933         int is_lr90, has_tda9820_tda9821;
2934         int tuner_type = UNSET, ttype;
2935
2936         gpio_inout(0xffffff, 0);
2937         udelay(8);  /* without this we would see the 0x1800 mask */
2938         gpio = gpio_read();
2939         /* FIXME: must restore OUR_EN ??? */
2940
2941         /* all cards provide GPIO info, some have an additional eeprom
2942          * LR50: GPIO coding can be found lower right CP1 .. CP9
2943          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2944          *       GPIO14-12: n.c.
2945          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2946
2947          * lowest 3 bytes are remote control codes (no handshake needed)
2948          * xxxFFF: No remote control chip soldered
2949          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2950          * Note: Some bits are Audio_Mask !
2951          */
2952         ttype = (gpio & 0x0f0000) >> 16;
2953         switch (ttype) {
2954         case 0x0:
2955                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
2956                 break;
2957         case 0x2:
2958                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
2959                 break;
2960         case 0x4:
2961                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2962                 break;
2963         case 0x6:
2964                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
2965                 break;
2966         case 0xC:
2967                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2968                 break;
2969         default:
2970                 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
2971                 break;
2972         }
2973
2974         has_remote          =   gpio & 0x800000;
2975         has_radio           =   gpio & 0x400000;
2976         /*   unknown                   0x200000;
2977          *   unknown2                  0x100000; */
2978         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
2979         has_tda9820_tda9821 = !(gpio & 0x004000);
2980         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2981         /*
2982          * gpio & 0x001000    output bit for audio routing */
2983
2984         if (is_capture_only)
2985                 tuner_type = TUNER_ABSENT; /* No tuner present */
2986
2987         pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2988                 btv->c.nr, has_radio ? "yes" : "no",
2989                 has_remote ? "yes" : "no", tuner_type, gpio);
2990         pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2991                 btv->c.nr, is_lr90 ? "yes" : "no",
2992                 has_tda9820_tda9821 ? "yes" : "no",
2993                 is_capture_only ? "yes" : "no");
2994
2995         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
2996                 btv->tuner_type = tuner_type;
2997         btv->has_radio = has_radio;
2998
2999         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3000          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3001          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3002         if (has_tda9820_tda9821)
3003                 btv->audio_mode_gpio = lt9415_audio;
3004         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3005 }
3006
3007 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3008                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3009 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3010                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3011
3012 static void miro_pinnacle_gpio(struct bttv *btv)
3013 {
3014         int id,msp,gpio;
3015         char *info;
3016
3017         gpio_inout(0xffffff, 0);
3018         gpio = gpio_read();
3019         id   = ((gpio>>10) & 63) -1;
3020         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3021         if (id < 32) {
3022                 btv->tuner_type = miro_tunermap[id];
3023                 if (0 == (gpio & 0x20)) {
3024                         btv->has_radio = 1;
3025                         if (!miro_fmtuner[id]) {
3026                                 btv->has_matchbox = 1;
3027                                 btv->mbox_we    = (1<<6);
3028                                 btv->mbox_most  = (1<<7);
3029                                 btv->mbox_clk   = (1<<8);
3030                                 btv->mbox_data  = (1<<9);
3031                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3032                         }
3033                 } else {
3034                         btv->has_radio = 0;
3035                 }
3036                 if (-1 != msp) {
3037                         if (btv->c.type == BTTV_BOARD_MIRO)
3038                                 btv->c.type = BTTV_BOARD_MIROPRO;
3039                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3040                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3041                 }
3042                 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3043                         btv->c.nr, id+1, btv->tuner_type,
3044                         !btv->has_radio ? "no" :
3045                         (btv->has_matchbox ? "matchbox" : "fmtuner"),
3046                         (-1 == msp) ? "no" : "yes");
3047         } else {
3048                 /* new cards with microtune tuner */
3049                 id = 63 - id;
3050                 btv->has_radio = 0;
3051                 switch (id) {
3052                 case 1:
3053                         info = "PAL / mono";
3054                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3055                         break;
3056                 case 2:
3057                         info = "PAL+SECAM / stereo";
3058                         btv->has_radio = 1;
3059                         btv->tda9887_conf = TDA9887_QSS;
3060                         break;
3061                 case 3:
3062                         info = "NTSC / stereo";
3063                         btv->has_radio = 1;
3064                         btv->tda9887_conf = TDA9887_QSS;
3065                         break;
3066                 case 4:
3067                         info = "PAL+SECAM / mono";
3068                         btv->tda9887_conf = TDA9887_QSS;
3069                         break;
3070                 case 5:
3071                         info = "NTSC / mono";
3072                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3073                         break;
3074                 case 6:
3075                         info = "NTSC / stereo";
3076                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3077                         break;
3078                 case 7:
3079                         info = "PAL / stereo";
3080                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3081                         break;
3082                 default:
3083                         info = "oops: unknown card";
3084                         break;
3085                 }
3086                 if (-1 != msp)
3087                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3088                 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3089                         btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3090                 btv->tuner_type = TUNER_MT2032;
3091         }
3092 }
3093
3094 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3095 #define LM1882_SYNC_DRIVE     0x200000L
3096
3097 static void init_ids_eagle(struct bttv *btv)
3098 {
3099         gpio_inout(0xffffff,0xFFFF37);
3100         gpio_write(0x200020);
3101
3102         /* flash strobe inverter ?! */
3103         gpio_write(0x200024);
3104
3105         /* switch sync drive off */
3106         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3107
3108         /* set BT848 muxel to 2 */
3109         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3110 }
3111
3112 /* Muxsel helper for the IDS Eagle.
3113  * the eagles does not use the standard muxsel-bits but
3114  * has its own multiplexer */
3115 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3116 {
3117         gpio_bits(3, input & 3);
3118
3119         /* composite */
3120         /* set chroma ADC to sleep */
3121         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3122         /* set to composite video */
3123         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3124         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3125
3126         /* switch sync drive off */
3127         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3128 }
3129
3130 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3131 {
3132         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3133         gpio_write(masks[input%4]);
3134 }
3135
3136 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3137    alarms output
3138
3139    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3140    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3141
3142    IN - sensor inputs, INx - sensor inputs and TI XORed together
3143    O1,O2,O3 - alarm outputs (relays)
3144
3145    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3146
3147 */
3148
3149 static void init_lmlbt4x(struct bttv *btv)
3150 {
3151         pr_debug("LMLBT4x init\n");
3152         btwrite(0x000000, BT848_GPIO_REG_INP);
3153         gpio_inout(0xffffff, 0x0006C0);
3154         gpio_write(0x000000);
3155 }
3156
3157 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3158 {
3159         unsigned int inmux = input % 8;
3160         gpio_inout( 0xf, 0xf );
3161         gpio_bits( 0xf, inmux );
3162 }
3163
3164 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3165 {
3166         unsigned int inmux = input % 4;
3167         gpio_inout( 3<<9, 3<<9 );
3168         gpio_bits( 3<<9, inmux<<9 );
3169 }
3170
3171 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3172 {
3173         unsigned int inmux = input % 16;
3174         gpio_inout(0xf, 0xf);
3175         gpio_bits(0xf, inmux);
3176 }
3177
3178 /*
3179  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3180  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3181  * The muxes are controlled via a 74HC373 latch which is connected to
3182  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3183  * Q0 of the latch is connected to the Enable (~E) input of the first
3184  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3185  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3186  */
3187
3188 static void td3116_latch_value(struct bttv *btv, u32 value)
3189 {
3190         gpio_bits((1<<18) | 0xff, value);
3191         gpio_bits((1<<18) | 0xff, (1<<18) | value);
3192         udelay(1);
3193         gpio_bits((1<<18) | 0xff, value);
3194 }
3195
3196 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3197 {
3198         u32 value;
3199         u32 highbit;
3200
3201         highbit = (input & 0x8) >> 3 ;
3202
3203         /* Disable outputs and set value in the mux */
3204         value = 0x11; /* Disable outputs */
3205         value |= ((input & 0x7) << 1)  << (4 * highbit);
3206         td3116_latch_value(btv, value);
3207
3208         /* Enable the correct output */
3209         value &= ~0x11;
3210         value |= ((highbit ^ 0x1) << 4) | highbit;
3211         td3116_latch_value(btv, value);
3212 }
3213
3214 /* ----------------------------------------------------------------------- */
3215
3216 static void bttv_reset_audio(struct bttv *btv)
3217 {
3218         /*
3219          * BT878A has a audio-reset register.
3220          * 1. This register is an audio reset function but it is in
3221          *    function-0 (video capture) address space.
3222          * 2. It is enough to do this once per power-up of the card.
3223          * 3. There is a typo in the Conexant doc -- it is not at
3224          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3225          * --//Shrikumar 030609
3226          */
3227         if (btv->id != 878)
3228                 return;
3229
3230         if (bttv_debug)
3231                 pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3232         btwrite((1<<7), 0x058);
3233         udelay(10);
3234         btwrite(     0, 0x058);
3235 }
3236
3237 /* initialization part one -- before registering i2c bus */
3238 void __devinit bttv_init_card1(struct bttv *btv)
3239 {
3240         switch (btv->c.type) {
3241         case BTTV_BOARD_HAUPPAUGE:
3242         case BTTV_BOARD_HAUPPAUGE878:
3243                 boot_msp34xx(btv,5);
3244                 break;
3245         case BTTV_BOARD_VOODOOTV_200:
3246         case BTTV_BOARD_VOODOOTV_FM:
3247                 boot_msp34xx(btv,20);
3248                 break;
3249         case BTTV_BOARD_AVERMEDIA98:
3250                 boot_msp34xx(btv,11);
3251                 break;
3252         case BTTV_BOARD_HAUPPAUGEPVR:
3253                 pvr_boot(btv);
3254                 break;
3255         case BTTV_BOARD_TWINHAN_DST:
3256         case BTTV_BOARD_AVDVBT_771:
3257         case BTTV_BOARD_PINNACLESAT:
3258                 btv->use_i2c_hw = 1;
3259                 break;
3260         case BTTV_BOARD_ADLINK_RTV24:
3261                 init_RTV24( btv );
3262                 break;
3263
3264         }
3265         if (!bttv_tvcards[btv->c.type].has_dvb)
3266                 bttv_reset_audio(btv);
3267 }
3268
3269 /* initialization part two -- after registering i2c bus */
3270 void __devinit bttv_init_card2(struct bttv *btv)
3271 {
3272         btv->tuner_type = UNSET;
3273
3274         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3275                 bttv_readee(btv,eeprom_data,0xa0);
3276                 identify_by_eeprom(btv,eeprom_data);
3277         }
3278
3279         switch (btv->c.type) {
3280         case BTTV_BOARD_MIRO:
3281         case BTTV_BOARD_MIROPRO:
3282         case BTTV_BOARD_PINNACLE:
3283         case BTTV_BOARD_PINNACLEPRO:
3284                 /* miro/pinnacle */
3285                 miro_pinnacle_gpio(btv);
3286                 break;
3287         case BTTV_BOARD_FLYVIDEO_98:
3288         case BTTV_BOARD_MAXI:
3289         case BTTV_BOARD_LIFE_FLYKIT:
3290         case BTTV_BOARD_FLYVIDEO:
3291         case BTTV_BOARD_TYPHOON_TVIEW:
3292         case BTTV_BOARD_CHRONOS_VS2:
3293         case BTTV_BOARD_FLYVIDEO_98FM:
3294         case BTTV_BOARD_FLYVIDEO2000:
3295         case BTTV_BOARD_FLYVIDEO98EZ:
3296         case BTTV_BOARD_CONFERENCETV:
3297         case BTTV_BOARD_LIFETEC_9415:
3298                 flyvideo_gpio(btv);
3299                 break;
3300         case BTTV_BOARD_HAUPPAUGE:
3301         case BTTV_BOARD_HAUPPAUGE878:
3302         case BTTV_BOARD_HAUPPAUGEPVR:
3303                 /* pick up some config infos from the eeprom */
3304                 bttv_readee(btv,eeprom_data,0xa0);
3305                 hauppauge_eeprom(btv);
3306                 break;
3307         case BTTV_BOARD_AVERMEDIA98:
3308         case BTTV_BOARD_AVPHONE98:
3309                 bttv_readee(btv,eeprom_data,0xa0);
3310                 avermedia_eeprom(btv);
3311                 break;
3312         case BTTV_BOARD_PXC200:
3313                 init_PXC200(btv);
3314                 break;
3315         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3316                 picolo_tetra_init(btv);
3317                 break;
3318         case BTTV_BOARD_VHX:
3319                 btv->has_radio    = 1;
3320                 btv->has_matchbox = 1;
3321                 btv->mbox_we      = 0x20;
3322                 btv->mbox_most    = 0;
3323                 btv->mbox_clk     = 0x08;
3324                 btv->mbox_data    = 0x10;
3325                 btv->mbox_mask    = 0x38;
3326                 break;
3327         case BTTV_BOARD_VOBIS_BOOSTAR:
3328         case BTTV_BOARD_TERRATV:
3329                 terratec_active_radio_upgrade(btv);
3330                 break;
3331         case BTTV_BOARD_MAGICTVIEW061:
3332                 if (btv->cardid == 0x3002144f) {
3333                         btv->has_radio=1;
3334                         pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3335                                 btv->c.nr);
3336                 }
3337                 break;
3338         case BTTV_BOARD_STB2:
3339                 if (btv->cardid == 0x3060121a) {
3340                         /* Fix up entry for 3DFX VoodooTV 100,
3341                            which is an OEM STB card variant. */
3342                         btv->has_radio=0;
3343                         btv->tuner_type=TUNER_TEMIC_NTSC;
3344                 }
3345                 break;
3346         case BTTV_BOARD_OSPREY1x0:
3347         case BTTV_BOARD_OSPREY1x0_848:
3348         case BTTV_BOARD_OSPREY101_848:
3349         case BTTV_BOARD_OSPREY1x1:
3350         case BTTV_BOARD_OSPREY1x1_SVID:
3351         case BTTV_BOARD_OSPREY2xx:
3352         case BTTV_BOARD_OSPREY2x0_SVID:
3353         case BTTV_BOARD_OSPREY2x0:
3354         case BTTV_BOARD_OSPREY440:
3355         case BTTV_BOARD_OSPREY500:
3356         case BTTV_BOARD_OSPREY540:
3357         case BTTV_BOARD_OSPREY2000:
3358                 bttv_readee(btv,eeprom_data,0xa0);
3359                 osprey_eeprom(btv, eeprom_data);
3360                 break;
3361         case BTTV_BOARD_IDS_EAGLE:
3362                 init_ids_eagle(btv);
3363                 break;
3364         case BTTV_BOARD_MODTEC_205:
3365                 bttv_readee(btv,eeprom_data,0xa0);
3366                 modtec_eeprom(btv);
3367                 break;
3368         case BTTV_BOARD_LMLBT4:
3369                 init_lmlbt4x(btv);
3370                 break;
3371         case BTTV_BOARD_TIBET_CS16:
3372                 tibetCS16_init(btv);
3373                 break;
3374         case BTTV_BOARD_KODICOM_4400R:
3375                 kodicom4400r_init(btv);
3376                 break;
3377         case BTTV_BOARD_GEOVISION_GV800S:
3378                 gv800s_init(btv);
3379                 break;
3380         }
3381
3382         /* pll configuration */
3383         if (!(btv->id==848 && btv->revision==0x11)) {
3384                 /* defaults from card list */
3385                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3386                         btv->pll.pll_ifreq=28636363;
3387                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3388                 }
3389                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3390                         btv->pll.pll_ifreq=35468950;
3391                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3392                 }
3393                 /* insmod options can override */
3394                 switch (pll[btv->c.nr]) {
3395                 case 0: /* none */
3396                         btv->pll.pll_crystal = 0;
3397                         btv->pll.pll_ifreq   = 0;
3398                         btv->pll.pll_ofreq   = 0;
3399                         break;
3400                 case 1: /* 28 MHz */
3401                 case 28:
3402                         btv->pll.pll_ifreq   = 28636363;
3403                         btv->pll.pll_ofreq   = 0;
3404                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3405                         break;
3406                 case 2: /* 35 MHz */
3407                 case 35:
3408                         btv->pll.pll_ifreq   = 35468950;
3409                         btv->pll.pll_ofreq   = 0;
3410                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3411                         break;
3412                 }
3413         }
3414         btv->pll.pll_current = -1;
3415
3416         /* tuner configuration (from card list / autodetect / insmod option) */
3417         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3418                 if (UNSET == btv->tuner_type)
3419                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3420         if (UNSET != tuner[btv->c.nr])
3421                 btv->tuner_type = tuner[btv->c.nr];
3422
3423         if (btv->tuner_type == TUNER_ABSENT)
3424                 pr_info("%d: tuner absent\n", btv->c.nr);
3425         else if (btv->tuner_type == UNSET)
3426                 pr_warn("%d: tuner type unset\n", btv->c.nr);
3427         else
3428                 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3429
3430         if (autoload != UNSET) {
3431                 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3432                 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3433                         btv->c.nr);
3434         }
3435
3436         if (UNSET == btv->tuner_type)
3437                 btv->tuner_type = TUNER_ABSENT;
3438
3439         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3440                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3441         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3442                     UNSET : bttv_tvcards[btv->c.type].svhs;
3443         if (svhs[btv->c.nr] != UNSET)
3444                 btv->svhs = svhs[btv->c.nr];
3445         if (remote[btv->c.nr] != UNSET)
3446                 btv->has_remote = remote[btv->c.nr];
3447
3448         if (bttv_tvcards[btv->c.type].has_radio)
3449                 btv->has_radio = 1;
3450         if (bttv_tvcards[btv->c.type].has_remote)
3451                 btv->has_remote = 1;
3452         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3453                 btv->gpioirq = 1;
3454         if (bttv_tvcards[btv->c.type].volume_gpio)
3455                 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3456         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3457                 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3458
3459         if (btv->tuner_type == TUNER_ABSENT)
3460                 return;  /* no tuner or related drivers to load */
3461
3462         if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3463                 /* Probe for RDS receiver chip */
3464                 static const unsigned short addrs[] = {
3465                         0x20 >> 1,
3466                         0x22 >> 1,
3467                         I2C_CLIENT_END
3468                 };
3469                 struct v4l2_subdev *sd;
3470
3471                 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3472                         &btv->c.i2c_adap, "saa6588", 0, addrs);
3473                 btv->has_saa6588 = (sd != NULL);
3474         }
3475
3476         /* try to detect audio/fader chips */
3477
3478         /* First check if the user specified the audio chip via a module
3479            option. */
3480
3481         switch (audiodev[btv->c.nr]) {
3482         case -1:
3483                 return; /* do not load any audio module */
3484
3485         case 0: /* autodetect */
3486                 break;
3487
3488         case 1: {
3489                 /* The user specified that we should probe for msp3400 */
3490                 static const unsigned short addrs[] = {
3491                         I2C_ADDR_MSP3400 >> 1,
3492                         I2C_ADDR_MSP3400_ALT >> 1,
3493                         I2C_CLIENT_END
3494                 };
3495
3496                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3497                         &btv->c.i2c_adap, "msp3400", 0, addrs);
3498                 if (btv->sd_msp34xx)
3499                         return;
3500                 goto no_audio;
3501         }
3502
3503         case 2: {
3504                 /* The user specified that we should probe for tda7432 */
3505                 static const unsigned short addrs[] = {
3506                         I2C_ADDR_TDA7432 >> 1,
3507                         I2C_CLIENT_END
3508                 };
3509
3510                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3511                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3512                         return;
3513                 goto no_audio;
3514         }
3515
3516         case 3: {
3517                 /* The user specified that we should probe for tvaudio */
3518                 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3519                         &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3520                 if (btv->sd_tvaudio)
3521                         return;
3522                 goto no_audio;
3523         }
3524
3525         default:
3526                 pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3527                 return;
3528         }
3529
3530         /* There were no overrides, so now we try to discover this through the
3531            card definition */
3532
3533         /* probe for msp3400 first: this driver can detect whether or not
3534            it really is a msp3400, so it will return NULL when the device
3535            found is really something else (e.g. a tea6300). */
3536         if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3537                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3538                         &btv->c.i2c_adap, "msp3400",
3539                         0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3540         } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3541                 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3542                         &btv->c.i2c_adap, "msp3400",
3543                         0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3544         }
3545
3546         /* If we found a msp34xx, then we're done. */
3547         if (btv->sd_msp34xx)
3548                 return;
3549
3550         /* it might also be a tda7432. */
3551         if (!bttv_tvcards[btv->c.type].no_tda7432) {
3552                 static const unsigned short addrs[] = {
3553                         I2C_ADDR_TDA7432 >> 1,
3554                         I2C_CLIENT_END
3555                 };
3556
3557                 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3558                                 &btv->c.i2c_adap, "tda7432", 0, addrs))
3559                         return;
3560         }
3561
3562         /* Now see if we can find one of the tvaudio devices. */
3563         btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3564                 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3565         if (btv->sd_tvaudio)
3566                 return;
3567
3568 no_audio:
3569         pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3570 }
3571
3572
3573 /* initialize the tuner */
3574 void __devinit bttv_init_tuner(struct bttv *btv)
3575 {
3576         int addr = ADDR_UNSET;
3577
3578         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3579                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3580
3581         if (btv->tuner_type != TUNER_ABSENT) {
3582                 struct tuner_setup tun_setup;
3583
3584                 /* Load tuner module before issuing tuner config call! */
3585                 if (btv->has_radio)
3586                         v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3587                                 &btv->c.i2c_adap, "tuner",
3588                                 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3589                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3590                                 &btv->c.i2c_adap, "tuner",
3591                                 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3592                 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3593                                 &btv->c.i2c_adap, "tuner",
3594                                 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3595
3596                 tun_setup.mode_mask = T_ANALOG_TV;
3597                 tun_setup.type = btv->tuner_type;
3598                 tun_setup.addr = addr;
3599
3600                 if (btv->has_radio)
3601                         tun_setup.mode_mask |= T_RADIO;
3602
3603                 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3604         }
3605
3606         if (btv->tda9887_conf) {
3607                 struct v4l2_priv_tun_config tda9887_cfg;
3608
3609                 tda9887_cfg.tuner = TUNER_TDA9887;
3610                 tda9887_cfg.priv = &btv->tda9887_conf;
3611
3612                 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3613         }
3614 }
3615
3616 /* ----------------------------------------------------------------------- */
3617
3618 static void modtec_eeprom(struct bttv *btv)
3619 {
3620         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3621                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3622                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3623                         btv->c.nr, &eeprom_data[0x1e]);
3624         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3625                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3626                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3627                         btv->c.nr, &eeprom_data[0x1e]);
3628         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3629                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3630                 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3631                         btv->c.nr, &eeprom_data[0x1e]);
3632         } else {
3633                 pr_info("%d: Modtec: Unknown TunerString: %s\n",
3634                         btv->c.nr, &eeprom_data[0x1e]);
3635         }
3636 }
3637
3638 static void __devinit hauppauge_eeprom(struct bttv *btv)
3639 {
3640         struct tveeprom tv;
3641
3642         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3643         btv->tuner_type = tv.tuner_type;
3644         btv->has_radio  = tv.has_radio;
3645
3646         pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3647                 btv->c.nr, tv.model);
3648
3649         /*
3650          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3651          * type based on model #.
3652          */
3653         if(tv.model == 64900) {
3654                 pr_info("%d: Switching board type from %s to %s\n",
3655                         btv->c.nr,
3656                         bttv_tvcards[btv->c.type].name,
3657                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3658                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3659         }
3660
3661         /* The 61334 needs the msp3410 to do the radio demod to get sound */
3662         if (tv.model == 61334)
3663                 btv->radio_uses_msp_demodulator = 1;
3664 }
3665
3666 static int terratec_active_radio_upgrade(struct bttv *btv)
3667 {
3668         int freq;
3669
3670         btv->has_radio    = 1;
3671         btv->has_matchbox = 1;
3672         btv->mbox_we      = 0x10;
3673         btv->mbox_most    = 0x20;
3674         btv->mbox_clk     = 0x08;
3675         btv->mbox_data    = 0x04;
3676         btv->mbox_mask    = 0x3c;
3677
3678         btv->mbox_iow     = 1 <<  8;
3679         btv->mbox_ior     = 1 <<  9;
3680         btv->mbox_csel    = 1 << 10;
3681
3682         freq=88000/62.5;
3683         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3684         if (0x1ed8 == tea5757_read(btv)) {
3685                 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3686                 btv->has_radio    = 1;
3687                 btv->has_saa6588  = 1;
3688                 btv->has_matchbox = 1;
3689         } else {
3690                 btv->has_radio    = 0;
3691                 btv->has_matchbox = 0;
3692         }
3693         return 0;
3694 }
3695
3696
3697 /* ----------------------------------------------------------------------- */
3698
3699 /*
3700  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3701  *
3702  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3703  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3704  * unpacked with unzip).
3705  */
3706 #define PVR_GPIO_DELAY          10
3707
3708 #define BTTV_ALT_DATA           0x000001
3709 #define BTTV_ALT_DCLK           0x100000
3710 #define BTTV_ALT_NCONFIG        0x800000
3711
3712 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3713                                      u32 microlen)
3714 {
3715         u32 n;
3716         u8 bits;
3717         int i;
3718
3719         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3720         gpio_write(0);
3721         udelay(PVR_GPIO_DELAY);
3722
3723         gpio_write(BTTV_ALT_NCONFIG);
3724         udelay(PVR_GPIO_DELAY);
3725
3726         for (n = 0; n < microlen; n++) {
3727                 bits = micro[n];
3728                 for (i = 0 ; i < 8 ; i++) {
3729                         gpio_bits(BTTV_ALT_DCLK,0);
3730                         if (bits & 0x01)
3731                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3732                         else
3733                                 gpio_bits(BTTV_ALT_DATA,0);
3734                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3735                         bits >>= 1;
3736                 }
3737         }
3738         gpio_bits(BTTV_ALT_DCLK,0);
3739         udelay(PVR_GPIO_DELAY);
3740
3741         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3742         for (i = 0 ; i < 30 ; i++) {
3743                 gpio_bits(BTTV_ALT_DCLK,0);
3744                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3745         }
3746         gpio_bits(BTTV_ALT_DCLK,0);
3747         return 0;
3748 }
3749
3750 static int __devinit pvr_boot(struct bttv *btv)
3751 {
3752         const struct firmware *fw_entry;
3753         int rc;
3754
3755         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3756         if (rc != 0) {
3757                 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3758                 return rc;
3759         }
3760         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3761         pr_info("%d: altera firmware upload %s\n",
3762                 btv->c.nr, (rc < 0) ? "failed" : "ok");
3763         release_firmware(fw_entry);
3764         return rc;
3765 }
3766
3767 /* ----------------------------------------------------------------------- */
3768 /* some osprey specific stuff                                              */
3769
3770 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3771 {
3772         int i;
3773         u32 serial = 0;
3774         int cardid = -1;
3775
3776         /* This code will nevery actually get called in this case.... */
3777         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3778                 /* this might be an antique... check for MMAC label in eeprom */
3779                 if (!strncmp(ee, "MMAC", 4)) {
3780                         u8 checksum = 0;
3781                         for (i = 0; i < 21; i++)
3782                                 checksum += ee[i];
3783                         if (checksum != ee[21])
3784                                 return;
3785                         cardid = BTTV_BOARD_OSPREY1x0_848;
3786                         for (i = 12; i < 21; i++)
3787                                 serial *= 10, serial += ee[i] - '0';
3788                 }
3789         } else {
3790                 unsigned short type;
3791
3792                 for (i = 4*16; i < 8*16; i += 16) {
3793                         u16 checksum = ip_compute_csum(ee + i, 16);
3794
3795                         if ((checksum&0xff) + (checksum>>8) == 0xff)
3796                                 break;
3797                 }
3798                 if (i >= 8*16)
3799                         return;
3800                 ee += i;
3801
3802                 /* found a valid descriptor */
3803                 type = get_unaligned_be16((__be16 *)(ee+4));
3804
3805                 switch(type) {
3806                 /* 848 based */
3807                 case 0x0004:
3808                         cardid = BTTV_BOARD_OSPREY1x0_848;
3809                         break;
3810                 case 0x0005:
3811                         cardid = BTTV_BOARD_OSPREY101_848;
3812                         break;
3813
3814                 /* 878 based */
3815                 case 0x0012:
3816                 case 0x0013:
3817                         cardid = BTTV_BOARD_OSPREY1x0;
3818                         break;
3819                 case 0x0014:
3820                 case 0x0015:
3821                         cardid = BTTV_BOARD_OSPREY1x1;
3822                         break;
3823                 case 0x0016:
3824                 case 0x0017:
3825                 case 0x0020:
3826                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3827                         break;
3828                 case 0x0018:
3829                 case 0x0019:
3830                 case 0x001E:
3831                 case 0x001F:
3832                         cardid = BTTV_BOARD_OSPREY2xx;
3833                         break;
3834                 case 0x001A:
3835                 case 0x001B:
3836                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3837                         break;
3838                 case 0x0040:
3839                         cardid = BTTV_BOARD_OSPREY500;
3840                         break;
3841                 case 0x0050:
3842                 case 0x0056:
3843                         cardid = BTTV_BOARD_OSPREY540;
3844                         /* bttv_osprey_540_init(btv); */
3845                         break;
3846                 case 0x0060:
3847                 case 0x0070:
3848                 case 0x00A0:
3849                         cardid = BTTV_BOARD_OSPREY2x0;
3850                         /* enable output on select control lines */
3851                         gpio_inout(0xffffff,0x000303);
3852                         break;
3853                 case 0x00D8:
3854                         cardid = BTTV_BOARD_OSPREY440;
3855                         break;
3856                 default:
3857                         /* unknown...leave generic, but get serial # */
3858                         pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
3859                                 btv->c.nr, type);
3860                         break;
3861                 }
3862                 serial = get_unaligned_be32((__be32 *)(ee+6));
3863         }
3864
3865         pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
3866                 btv->c.nr, cardid,
3867                 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3868
3869         if (cardid<0 || btv->c.type == cardid)
3870                 return;
3871
3872         /* card type isn't set correctly */
3873         if (card[btv->c.nr] < bttv_num_tvcards) {
3874                 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
3875                         btv->c.nr);
3876         } else {
3877                 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
3878                         btv->c.nr, btv->c.type, cardid);
3879                 btv->c.type = cardid;
3880         }
3881 }
3882
3883 /* ----------------------------------------------------------------------- */
3884 /* AVermedia specific stuff, from  bktr_card.c                             */
3885
3886 static int tuner_0_table[] = {
3887         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3888         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3889         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3890         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3891         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3892         TUNER_PHILIPS_FM1216ME_MK3 };
3893
3894 static int tuner_1_table[] = {
3895         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3896         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3897         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3898         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3899         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3900
3901 static void __devinit avermedia_eeprom(struct bttv *btv)
3902 {
3903         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3904
3905         tuner_make      = (eeprom_data[0x41] & 0x7);
3906         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3907         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3908         btv->has_remote = (eeprom_data[0x42] & 0x01);
3909
3910         if (tuner_make == 0 || tuner_make == 2)
3911                 if (tuner_format <= 0x0a)
3912                         tuner_type = tuner_0_table[tuner_format];
3913         if (tuner_make == 1)
3914                 if (tuner_format <= 9)
3915                         tuner_type = tuner_1_table[tuner_format];
3916
3917         if (tuner_make == 4)
3918                 if (tuner_format == 0x09)
3919                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3920
3921         pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3922                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3923         if (tuner_type) {
3924                 btv->tuner_type = tuner_type;
3925                 pr_cont("%d", tuner_type);
3926         } else
3927                 pr_cont("Unknown type");
3928         pr_cont(" radio:%s remote control:%s\n",
3929                tuner_tv_fm     ? "yes" : "no",
3930                btv->has_remote ? "yes" : "no");
3931 }
3932
3933 /*
3934  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
3935  * analog demod, which is not I2C controlled like the newer and more common
3936  * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
3937  * that control the IF for the video and audio.  Apparently, bttv GPIO
3938  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3939  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3940  */
3941 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3942 {
3943
3944         if (btv->audio == TVAUDIO_INPUT_TUNER) {
3945                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3946                         gpiobits |= 0x10000;
3947                 else
3948                         gpiobits &= ~0x10000;
3949         }
3950
3951         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3952         return gpiobits;
3953 }
3954
3955
3956 /*
3957  * reset/enable the MSP on some Hauppauge cards
3958  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3959  *
3960  * Hauppauge:  pin  5
3961  * Voodoo:     pin 20
3962  */
3963 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3964 {
3965         int mask = (1 << pin);
3966
3967         gpio_inout(mask,mask);
3968         gpio_bits(mask,0);
3969         mdelay(2);
3970         udelay(500);
3971         gpio_bits(mask,mask);
3972
3973         if (bttv_gpio)
3974                 bttv_gpio_tracking(btv,"msp34xx");
3975         if (bttv_verbose)
3976                 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
3977                         btv->c.nr, pin);
3978 }
3979
3980 /* ----------------------------------------------------------------------- */
3981 /*  Imagenation L-Model PXC200 Framegrabber */
3982 /*  This is basically the same procedure as
3983  *  used by Alessandro Rubini in his pxc200
3984  *  driver, but using BTTV functions */
3985
3986 static void __devinit init_PXC200(struct bttv *btv)
3987 {
3988         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3989                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3990                                             0x00 };
3991         unsigned int i;
3992         int tmp;
3993         u32 val;
3994
3995         /* Initialise GPIO-connevted stuff */
3996         gpio_inout(0xffffff, (1<<13));
3997         gpio_write(0);
3998         udelay(3);
3999         gpio_write(1<<13);
4000         /* GPIO inputs are pulled up, so no need to drive
4001          * reset pin any longer */
4002         gpio_bits(0xffffff, 0);
4003         if (bttv_gpio)
4004                 bttv_gpio_tracking(btv,"pxc200");
4005
4006         /*  we could/should try and reset/control the AD pots? but
4007             right now  we simply  turned off the crushing.  Without
4008             this the AGC drifts drifts
4009             remember the EN is reverse logic -->
4010             setting BT848_ADC_AGC_EN disable the AGC
4011             tboult@eecs.lehigh.edu
4012         */
4013
4014         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4015
4016         /*      Initialise MAX517 DAC */
4017         pr_info("Setting DAC reference voltage level ...\n");
4018         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4019
4020         /*      Initialise 12C508 PIC */
4021         /*      The I2CWrite and I2CRead commmands are actually to the
4022          *      same chips - but the R/W bit is included in the address
4023          *      argument so the numbers are different */
4024
4025
4026         pr_info("Initialising 12C508 PIC chip ...\n");
4027
4028         /* First of all, enable the clock line. This is used in the PXC200-F */
4029         val = btread(BT848_GPIO_DMA_CTL);
4030         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4031         btwrite(val, BT848_GPIO_DMA_CTL);
4032
4033         /* Then, push to 0 the reset pin long enough to reset the *
4034          * device same as above for the reset line, but not the same
4035          * value sent to the GPIO-connected stuff
4036          * which one is the good one? */
4037         gpio_inout(0xffffff,(1<<2));
4038         gpio_write(0);
4039         udelay(10);
4040         gpio_write(1<<2);
4041
4042         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4043                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4044                 if (tmp != -1) {
4045                         pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4046                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4047                 }
4048         }
4049
4050         pr_info("PXC200 Initialised\n");
4051 }
4052
4053
4054
4055 /* ----------------------------------------------------------------------- */
4056 /*
4057  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4058  *  it. This apparently involves the following procedure for each 878 chip:
4059  *
4060  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4061  *
4062  *  2)  write to GPIO_DATA
4063  *      - 0x0E
4064  *      - sleep 1ms
4065  *      - 0x10 + 0x0E
4066  *      - sleep 10ms
4067  *      - 0x0E
4068  *     read from GPIO_DATA into buf (uint_32)
4069  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4070  *                 error. ERROR_CPLD_Check_Failed stop.
4071  *
4072  *  3) write to GPIO_DATA
4073  *      - write 0x4400 + 0x0E
4074  *      - sleep 10ms
4075  *      - write 0x4410 + 0x0E
4076  *      - sleep 1ms
4077  *      - write 0x0E
4078  *     read from GPIO_DATA into buf (uint_32)
4079  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4080  *                error. ERROR_CPLD_Check_Failed.
4081  */
4082 /* ----------------------------------------------------------------------- */
4083 static void
4084 init_RTV24 (struct bttv *btv)
4085 {
4086         uint32_t dataRead = 0;
4087         long watchdog_value = 0x0E;
4088
4089         pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4090                 btv->c.nr);
4091
4092         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4093
4094         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4095         msleep (1);
4096         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4097         msleep (10);
4098         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4099
4100         dataRead = btread (BT848_GPIO_DATA);
4101
4102         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4103                 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4104                         btv->c.nr, dataRead);
4105         }
4106
4107         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4108         msleep (10);
4109         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4110         msleep (1);
4111         btwrite (watchdog_value, BT848_GPIO_DATA);
4112         msleep (1);
4113         dataRead = btread (BT848_GPIO_DATA);
4114
4115         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4116                 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4117                         btv->c.nr, dataRead);
4118
4119                 return;
4120         }
4121
4122         pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4123 }
4124
4125
4126
4127 /* ----------------------------------------------------------------------- */
4128 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4129 /*
4130  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4131  * This code is placed under the terms of the GNU General Public License
4132  *
4133  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4134  */
4135
4136 static void bus_low(struct bttv *btv, int bit)
4137 {
4138         if (btv->mbox_ior) {
4139                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4140                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4141                 udelay(5);
4142         }
4143
4144         gpio_bits(bit,0);
4145         udelay(5);
4146
4147         if (btv->mbox_ior) {
4148                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4149                 udelay(5);
4150         }
4151 }
4152
4153 static void bus_high(struct bttv *btv, int bit)
4154 {
4155         if (btv->mbox_ior) {
4156                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4157                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4158                 udelay(5);
4159         }
4160
4161         gpio_bits(bit,bit);
4162         udelay(5);
4163
4164         if (btv->mbox_ior) {
4165                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4166                 udelay(5);
4167         }
4168 }
4169
4170 static int bus_in(struct bttv *btv, int bit)
4171 {
4172         if (btv->mbox_ior) {
4173                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4174                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4175                 udelay(5);
4176
4177                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4178                 udelay(5);
4179         }
4180         return gpio_read() & (bit);
4181 }
4182
4183 /* TEA5757 register bits */
4184 #define TEA_FREQ                0:14
4185 #define TEA_BUFFER              15:15
4186
4187 #define TEA_SIGNAL_STRENGTH     16:17
4188
4189 #define TEA_PORT1               18:18
4190 #define TEA_PORT0               19:19
4191
4192 #define TEA_BAND                20:21
4193 #define TEA_BAND_FM             0
4194 #define TEA_BAND_MW             1
4195 #define TEA_BAND_LW             2
4196 #define TEA_BAND_SW             3
4197
4198 #define TEA_MONO                22:22
4199 #define TEA_ALLOW_STEREO        0
4200 #define TEA_FORCE_MONO          1
4201
4202 #define TEA_SEARCH_DIRECTION    23:23
4203 #define TEA_SEARCH_DOWN         0
4204 #define TEA_SEARCH_UP           1
4205
4206 #define TEA_STATUS              24:24
4207 #define TEA_STATUS_TUNED        0
4208 #define TEA_STATUS_SEARCHING    1
4209
4210 /* Low-level stuff */
4211 static int tea5757_read(struct bttv *btv)
4212 {
4213         unsigned long timeout;
4214         int value = 0;
4215         int i;
4216
4217         /* better safe than sorry */
4218         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4219
4220         if (btv->mbox_ior) {
4221                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4222                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4223                 udelay(5);
4224         }
4225
4226         if (bttv_gpio)
4227                 bttv_gpio_tracking(btv,"tea5757 read");
4228
4229         bus_low(btv,btv->mbox_we);
4230         bus_low(btv,btv->mbox_clk);
4231
4232         udelay(10);
4233         timeout= jiffies + msecs_to_jiffies(1000);
4234
4235         /* wait for DATA line to go low; error if it doesn't */
4236         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4237                 schedule();
4238         if (bus_in(btv,btv->mbox_data)) {
4239                 pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
4240                 return -1;
4241         }
4242
4243         dprintk("%d: tea5757:", btv->c.nr);
4244         for (i = 0; i < 24; i++) {
4245                 udelay(5);
4246                 bus_high(btv,btv->mbox_clk);
4247                 udelay(5);
4248                 dprintk_cont("%c",
4249                              bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
4250                 bus_low(btv,btv->mbox_clk);
4251                 value <<= 1;
4252                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4253                 dprintk_cont("%c",
4254                              bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
4255         }
4256         dprintk_cont("\n");
4257         dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
4258         return value;
4259 }
4260
4261 static int tea5757_write(struct bttv *btv, int value)
4262 {
4263         int i;
4264         int reg = value;
4265
4266         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4267
4268         if (btv->mbox_ior) {
4269                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4270                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4271                 udelay(5);
4272         }
4273         if (bttv_gpio)
4274                 bttv_gpio_tracking(btv,"tea5757 write");
4275
4276         dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
4277         bus_low(btv,btv->mbox_clk);
4278         bus_high(btv,btv->mbox_we);
4279         for (i = 0; i < 25; i++) {
4280                 if (reg & 0x1000000)
4281                         bus_high(btv,btv->mbox_data);
4282                 else
4283                         bus_low(btv,btv->mbox_data);
4284                 reg <<= 1;
4285                 bus_high(btv,btv->mbox_clk);
4286                 udelay(10);
4287                 bus_low(btv,btv->mbox_clk);
4288                 udelay(10);
4289         }
4290         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4291         return 0;
4292 }
4293
4294 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4295 {
4296         dprintk("tea5757_set_freq %d\n",freq);
4297         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4298 }
4299
4300 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4301  *
4302  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4303  * switch instead (CD22M3494E). This IC can have multiple active connections
4304  * between Xn (input) and Yn (output) pins. We need to clear any existing
4305  * connection prior to establish a new one, pulsing the STROBE pin.
4306  *
4307  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4308  * GPIO pins are wired as:
4309  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4310  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4311  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4312  *  GPIO[8]   -                  - P3[5] (microcontroller)
4313  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4314  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4315  *  GPINTR    -                  - P3[4] (microcontroller)
4316  *
4317  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4318  * configuration either directly (as we are doing) or using the microcontroller
4319  * which is also wired to I2C interface. I have no further info on the
4320  * microcontroller features, one would need to disassembly the firmware.
4321  * note: the vendor refused to give any information on this product, all
4322  *       that stuff was found using a multimeter! :)
4323  */
4324 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4325 {
4326         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4327                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4328
4329         gpio_bits(0x07f, muxgpio[input]);
4330
4331         /* reset all conections */
4332         gpio_bits(0x200,0x200);
4333         mdelay(1);
4334         gpio_bits(0x200,0x000);
4335         mdelay(1);
4336
4337         /* create a new connection */
4338         gpio_bits(0x480,0x480);
4339         mdelay(1);
4340         gpio_bits(0x480,0x080);
4341         mdelay(1);
4342 }
4343
4344 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4345  *
4346  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4347  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4348  * chips, ten eight input analog multiplexors, a not chip and a few
4349  * other components.
4350  *
4351  * 16 inputs on a secondary bracket are provided and can be selected
4352  * from each of the four capture chips.  Two of the eight input
4353  * multiplexors are used to select from any of the 16 input signals.
4354  *
4355  * Unsupported hardware capabilities:
4356  *  . A video output monitor on the secondary bracket can be selected from
4357  *    one of the 878A chips.
4358  *  . Another passthrough but I haven't spent any time investigating it.
4359  *  . Digital I/O (logic level connected to GPIO) is available from an
4360  *    onboard header.
4361  *
4362  * The on chip input mux should always be set to 2.
4363  * GPIO[16:19] - Video input selection
4364  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4365  * GPIO[?:?]   - Digital I/O.
4366  *
4367  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4368  * determined what function (if any) it provides.  With the microcontroller
4369  * and sync separator chips a guess is that it might have to do with video
4370  * switching and maybe some digital I/O.
4371  */
4372 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4373 {
4374         /* video mux */
4375         gpio_bits(0x0f0000, input << 16);
4376 }
4377
4378 static void tibetCS16_init(struct bttv *btv)
4379 {
4380         /* enable gpio bits, mask obtained via btSpy */
4381         gpio_inout(0xffffff, 0x0f7fff);
4382         gpio_write(0x0f7fff);
4383 }
4384
4385 /*
4386  * The following routines for the Kodicom-4400r get a little mind-twisting.
4387  * There is a "master" controller and three "slave" controllers, together
4388  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4389  * The analog switch is controlled by the "master", but the detection order
4390  * of the four BT878A chips is in an order which I just don't understand.
4391  * The "master" is actually the second controller to be detected.  The
4392  * logic on the board uses logical numbers for the 4 controllers, but
4393  * those numbers are different from the detection sequence.  When working
4394  * with the analog switch, we need to "map" from the detection sequence
4395  * over to the board's logical controller number.  This mapping sequence
4396  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4397  * unit 3, the second (which is the master) is logical unit 0, etc.
4398  * We need to maintain the status of the analog switch (which of the 16
4399  * cameras is connected to which of the 4 controllers).  Rather than
4400  * add to the bttv structure for this, we use the data reserved for
4401  * the mbox (unused for this card type).
4402  */
4403
4404 /*
4405  * First a routine to set the analog switch, which controls which camera
4406  * is routed to which controller.  The switch comprises an X-address
4407  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4408  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4409  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4410  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4411  * specified address.  The idea is to set the address and data, then bring
4412  * STROBE high, and finally bring STROBE back to low.
4413  */
4414 static void kodicom4400r_write(struct bttv *btv,
4415                                unsigned char xaddr,
4416                                unsigned char yaddr,
4417                                unsigned char data) {
4418         unsigned int udata;
4419
4420         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4421         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4422         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4423         gpio_bits(0x1ff, udata);                /* strobe low */
4424 }
4425
4426 /*
4427  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4428  * use this routine.  The routine finds the "master" for the card, maps
4429  * the controller number from the detected position over to the logical
4430  * number, writes the appropriate data to the analog switch, and housekeeps
4431  * the local copy of the switch information.  The parameter 'input' is the
4432  * requested camera number (0 - 15).
4433  */
4434 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4435 {
4436         char *sw_status;
4437         int xaddr, yaddr;
4438         struct bttv *mctlr;
4439         static unsigned char map[4] = {3, 0, 2, 1};
4440
4441         mctlr = master[btv->c.nr];
4442         if (mctlr == NULL) {    /* ignore if master not yet detected */
4443                 return;
4444         }
4445         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4446         yaddr = map[yaddr];
4447         sw_status = (char *)(&mctlr->mbox_we);
4448         xaddr = input & 0xf;
4449         /* Check if the controller/camera pair has changed, else ignore */
4450         if (sw_status[yaddr] != xaddr)
4451         {
4452                 /* "open" the old switch, "close" the new one, save the new */
4453                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4454                 sw_status[yaddr] = xaddr;
4455                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4456         }
4457 }
4458
4459 /*
4460  * During initialisation, we need to reset the analog switch.  We
4461  * also preset the switch to map the 4 connectors on the card to the
4462  * *user's* (see above description of kodicom4400r_muxsel) channels
4463  * 0 through 3
4464  */
4465 static void kodicom4400r_init(struct bttv *btv)
4466 {
4467         char *sw_status = (char *)(&btv->mbox_we);
4468         int ix;
4469
4470         gpio_inout(0x0003ff, 0x0003ff);
4471         gpio_write(1 << 9);     /* reset MUX */
4472         gpio_write(0);
4473         /* Preset camera 0 to the 4 controllers */
4474         for (ix = 0; ix < 4; ix++) {
4475                 sw_status[ix] = ix;
4476                 kodicom4400r_write(btv, ix, ix, 1);
4477         }
4478         /*
4479          * Since this is the "master", we need to set up the
4480          * other three controller chips' pointers to this structure
4481          * for later use in the muxsel routine.
4482          */
4483         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4484             return;
4485         master[btv->c.nr-1] = btv;
4486         master[btv->c.nr]   = btv;
4487         master[btv->c.nr+1] = btv;
4488         master[btv->c.nr+2] = btv;
4489 }
4490
4491 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4492  * video multiplexers to provide up to 16 video inputs. These
4493  * multiplexers are controlled by the lower 8 GPIO pins of the
4494  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4495
4496  * xxx0 is pin xxx of multiplexer U5,
4497  * yyy1 is pin yyy of multiplexer U2
4498  */
4499 #define ENA0    0x01
4500 #define ENB0    0x02
4501 #define ENA1    0x04
4502 #define ENB1    0x08
4503
4504 #define IN10    0x10
4505 #define IN00    0x20
4506 #define IN11    0x40
4507 #define IN01    0x80
4508
4509 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4510 {
4511         static const int masks[] = {
4512                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4513                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4514                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4515                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4516         };
4517         gpio_write(masks[input%16]);
4518 }
4519 static void picolo_tetra_init(struct bttv *btv)
4520 {
4521         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4522         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4523         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4524 }
4525 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4526 {
4527
4528         dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4529         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4530         /*GPIO[20]&GPIO[21] used to choose the right input*/
4531         btwrite (input<<20,BT848_GPIO_DATA);
4532
4533 }
4534
4535 /*
4536  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4537  *
4538  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4539  * swichers to provide 16 channels to MUX0. The TDA8540's have
4540  * 4 independent outputs and as such the IVC120G also has the
4541  * optional "Monitor Out" bus. This allows the card to be looking
4542  * at one input while the monitor is looking at another.
4543  *
4544  * Since I've couldn't be bothered figuring out how to add an
4545  * independent muxsel for the monitor bus, I've just set it to
4546  * whatever the card is looking at.
4547  *
4548  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4549  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4550  *
4551  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4552  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4553  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4554  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4555  *
4556  */
4557
4558 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4559 #define I2C_TDA8540        0x90
4560 #define I2C_TDA8540_ALT1   0x92
4561 #define I2C_TDA8540_ALT2   0x94
4562 #define I2C_TDA8540_ALT3   0x96
4563 #define I2C_TDA8540_ALT4   0x98
4564 #define I2C_TDA8540_ALT5   0x9a
4565 #define I2C_TDA8540_ALT6   0x9c
4566
4567 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4568 {
4569         /* Simple maths */
4570         int key = input % 4;
4571         int matrix = input / 4;
4572
4573         dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4574                 btv->c.nr, input, matrix, key);
4575
4576         /* Handles the input selection on the TDA8540's */
4577         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4578                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4579         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4580                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4581         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4582                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4583         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4584                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4585
4586         /* Handles the output enables on the TDA8540's */
4587         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4588                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4589         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4590                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4591         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4592                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4593         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4594                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4595
4596         /* 878's MUX0 is already selected for input via muxsel values */
4597 }
4598
4599
4600 /* PXC200 muxsel helper
4601  * luke@syseng.anu.edu.au
4602  * another transplant
4603  * from Alessandro Rubini (rubini@linux.it)
4604  *
4605  * There are 4 kinds of cards:
4606  * PXC200L which is bt848
4607  * PXC200F which is bt848 with PIC controlling mux
4608  * PXC200AL which is bt878
4609  * PXC200AF which is bt878 with PIC controlling mux
4610  */
4611 #define PX_CFG_PXC200F 0x01
4612 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4613 #define PX_I2C_PIC       0x0f
4614 #define PX_PXC200A_CARDID 0x200a1295
4615 #define PX_I2C_CMD_CFG   0x00
4616
4617 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4618 {
4619         int rc;
4620         long mux;
4621         int bitmask;
4622         unsigned char buf[2];
4623
4624         /* Read PIC config to determine if this is a PXC200F */
4625         /* PX_I2C_CMD_CFG*/
4626         buf[0]=0;
4627         buf[1]=0;
4628         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4629         if (rc) {
4630                 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4631                          btv->c.nr, rc);
4632           /* not PXC ? do nothing */
4633                 return;
4634         }
4635
4636         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4637         if (!(rc & PX_CFG_PXC200F)) {
4638                 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4639                          btv->c.nr, rc);
4640                 return;
4641         }
4642
4643
4644         /* The multiplexer in the 200F is handled by the GPIO port */
4645         /* get correct mapping between inputs  */
4646         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4647         /* ** not needed!?   */
4648         mux = input;
4649
4650         /* make sure output pins are enabled */
4651         /* bitmask=0x30f; */
4652         bitmask=0x302;
4653         /* check whether we have a PXC200A */
4654         if (btv->cardid == PX_PXC200A_CARDID)  {
4655            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4656            bitmask |= 7<<4; /* the DAC */
4657         }
4658         btwrite(bitmask, BT848_GPIO_OUT_EN);
4659
4660         bitmask = btread(BT848_GPIO_DATA);
4661         if (btv->cardid == PX_PXC200A_CARDID)
4662           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4663         else /* older device */
4664           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4665         btwrite(bitmask,BT848_GPIO_DATA);
4666
4667         /*
4668          * Was "to be safe, set the bt848 to input 0"
4669          * Actually, since it's ok at load time, better not messing
4670          * with these bits (on PXC200AF you need to set mux 2 here)
4671          *
4672          * needed because bttv-driver sets mux before calling this function
4673          */
4674         if (btv->cardid == PX_PXC200A_CARDID)
4675           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4676         else /* older device */
4677           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4678
4679         pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4680 }
4681
4682 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4683 {
4684         unsigned int mux = input % 4;
4685
4686         if (input == btv->svhs)
4687                 mux = 0;
4688
4689         gpio_bits(0x3, mux);
4690 }
4691
4692 /*
4693  * GeoVision GV-800(S) functions
4694  * Bruno Christo <bchristo@inf.ufsm.br>
4695 */
4696
4697 /* This is a function to control the analog switch, which determines which
4698  * camera is routed to which controller.  The switch comprises an X-address
4699  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4700  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4701  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4702  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4703  * specified address. There is also a chip select (gpio bit 16).
4704  * The idea is to set the address and chip select together, bring
4705  * STROBE high, write the data, and finally bring STROBE back to low.
4706  */
4707 static void gv800s_write(struct bttv *btv,
4708                          unsigned char xaddr,
4709                          unsigned char yaddr,
4710                          unsigned char data) {
4711         /* On the "master" 878A:
4712         * GPIO bits 0-9 are used for the analog switch:
4713         *   00 - 03:    camera selector
4714         *   04 - 06:    878A (controller) selector
4715         *   16:         cselect
4716         *   17:         strobe
4717         *   18:         data (1->on, 0->off)
4718         *   19:         reset
4719         */
4720         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4721         const u32 CSELECT = 1<<16;
4722         const u32 STROBE = 1<<17;
4723         const u32 DATA = data<<18;
4724
4725         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4726         gpio_bits(0x20000, STROBE);             /* STROBE high */
4727         gpio_bits(0x40000, DATA);               /* write DATA */
4728         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4729 }
4730
4731 /*
4732  * GeoVision GV-800(S) muxsel
4733  *
4734  * Each of the 4 cards (controllers) use this function.
4735  * The controller using this function selects the input through the GPIO pins
4736  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4737  *
4738  * The parameter 'input' is the requested camera number (0-4) on the controller.
4739  * The map array has the address of each input. Note that the addresses in the
4740  * array are in the sequence the original GeoVision driver uses, that is, set
4741  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4742  * the physical "camera 1" connector corresponds to controller 0 input 0,
4743  * "camera 2" corresponds to controller 1 input 0, and so on.
4744  *
4745  * After getting the input address, the function then writes the appropriate
4746  * data to the analog switch, and housekeeps the local copy of the switch
4747  * information.
4748  */
4749 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4750 {
4751         struct bttv *mctlr;
4752         char *sw_status;
4753         int xaddr, yaddr;
4754         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4755                                           { 0x1, 0x5, 0xb, 0x7 },
4756                                           { 0x2, 0x8, 0xc, 0xe },
4757                                           { 0x3, 0x9, 0xd, 0xf } };
4758         input = input%4;
4759         mctlr = master[btv->c.nr];
4760         if (mctlr == NULL) {
4761                 /* do nothing until the "master" is detected */
4762                 return;
4763         }
4764         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4765         sw_status = (char *)(&mctlr->mbox_we);
4766         xaddr = map[yaddr][input] & 0xf;
4767
4768         /* Check if the controller/camera pair has changed, ignore otherwise */
4769         if (sw_status[yaddr] != xaddr) {
4770                 /* disable the old switch, enable the new one and save status */
4771                 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4772                 sw_status[yaddr] = xaddr;
4773                 gv800s_write(mctlr, xaddr, yaddr, 1);
4774         }
4775 }
4776
4777 /* GeoVision GV-800(S) "master" chip init */
4778 static void gv800s_init(struct bttv *btv)
4779 {
4780         char *sw_status = (char *)(&btv->mbox_we);
4781         int ix;
4782
4783         gpio_inout(0xf107f, 0xf107f);
4784         gpio_write(1<<19); /* reset the analog MUX */
4785         gpio_write(0);
4786
4787         /* Preset camera 0 to the 4 controllers */
4788         for (ix = 0; ix < 4; ix++) {
4789                 sw_status[ix] = ix;
4790                 gv800s_write(btv, ix, ix, 1);
4791         }
4792
4793         /* Inputs on the "master" controller need this brightness fix */
4794         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4795
4796         if (btv->c.nr > BTTV_MAX-4)
4797                 return;
4798         /*
4799          * Store the "master" controller pointer in the master
4800          * array for later use in the muxsel function.
4801          */
4802         master[btv->c.nr]   = btv;
4803         master[btv->c.nr+1] = btv;
4804         master[btv->c.nr+2] = btv;
4805         master[btv->c.nr+3] = btv;
4806 }
4807
4808 /* ----------------------------------------------------------------------- */
4809 /* motherboard chipset specific stuff                                      */
4810
4811 void __init bttv_check_chipset(void)
4812 {
4813         int pcipci_fail = 0;
4814         struct pci_dev *dev = NULL;
4815
4816         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4817                 pcipci_fail = 1;
4818         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4819                 triton1 = 1;
4820         if (pci_pci_problems & PCIPCI_VSFX)
4821                 vsfx = 1;
4822 #ifdef PCIPCI_ALIMAGIK
4823         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4824                 latency = 0x0A;
4825 #endif
4826
4827
4828         /* print warnings about any quirks found */
4829         if (triton1)
4830                 pr_info("Host bridge needs ETBF enabled\n");
4831         if (vsfx)
4832                 pr_info("Host bridge needs VSFX enabled\n");
4833         if (pcipci_fail) {
4834                 pr_info("bttv and your chipset may not work together\n");
4835                 if (!no_overlay) {
4836                         pr_info("overlay will be disabled\n");
4837                         no_overlay = 1;
4838                 } else {
4839                         pr_info("overlay forced. Use this option at your own risk.\n");
4840                 }
4841         }
4842         if (UNSET != latency)
4843                 pr_info("pci latency fixup [%d]\n", latency);
4844         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4845                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4846                 unsigned char b;
4847                 pci_read_config_byte(dev, 0x53, &b);
4848                 if (bttv_debug)
4849                         pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4850                                 b);
4851         }
4852 }
4853
4854 int __devinit bttv_handle_chipset(struct bttv *btv)
4855 {
4856         unsigned char command;
4857
4858         if (!triton1 && !vsfx && UNSET == latency)
4859                 return 0;
4860
4861         if (bttv_verbose) {
4862                 if (triton1)
4863                         pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4864                                 btv->c.nr);
4865                 if (vsfx && btv->id >= 878)
4866                         pr_info("%d: enabling VSFX\n", btv->c.nr);
4867                 if (UNSET != latency)
4868                         pr_info("%d: setting pci timer to %d\n",
4869                                 btv->c.nr, latency);
4870         }
4871
4872         if (btv->id < 878) {
4873                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4874                 if (triton1)
4875                         btv->triton1 = BT848_INT_ETBF;
4876         } else {
4877                 /* bt878 has a bit in the pci config space for it */
4878                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4879                 if (triton1)
4880                         command |= BT878_EN_TBFX;
4881                 if (vsfx)
4882                         command |= BT878_EN_VSFX;
4883                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4884         }
4885         if (UNSET != latency)
4886                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4887         return 0;
4888 }
4889
4890
4891 /*
4892  * Local variables:
4893  * c-basic-offset: 8
4894  * End:
4895  */