drivers/media/video/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #include <linux/config.h>
  29 #include <linux/delay.h>
  30 #include <linux/module.h>
  31 #include <linux/moduleparam.h>
  32 #include <linux/kmod.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/firmware.h>
  37
  38 #include <asm/io.h>
  39
  40 #include "bttvp.h"
  41
  42 /* fwd decl */
  43 static void boot_msp34xx(struct bttv *btv, int pin);
  44 static void boot_bt832(struct bttv *btv);
  45 static void hauppauge_eeprom(struct bttv *btv);
  46 static void avermedia_eeprom(struct bttv *btv);
  47 static void osprey_eeprom(struct bttv *btv);
  48 static void modtec_eeprom(struct bttv *btv);
  49 static void init_PXC200(struct bttv *btv);
  50 static void init_RTV24(struct bttv *btv);
  51
  52 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
  53 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
  54 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
  55                                     int set);
  56 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
  57                                       int set);
  58 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
  59 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
  60 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
  61 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
  62 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
  63 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
  64 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
  65 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
  66 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  67 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  68 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  69 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  70 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  71
  72 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  73
  74 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  75 static void picolo_tetra_init(struct bttv *btv);
  76
  77 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  78 static void tibetCS16_init(struct bttv *btv);
  79
  80 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  81 static void kodicom4400r_init(struct bttv *btv);
  82
  83 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  84 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  85
  86 static int terratec_active_radio_upgrade(struct bttv *btv);
  87 static int tea5757_read(struct bttv *btv);
  88 static int tea5757_write(struct bttv *btv, int value);
  89 static void identify_by_eeprom(struct bttv *btv,
  90                                unsigned char eeprom_data[256]);
  91 static int __devinit pvr_boot(struct bttv *btv);
  92
  93 /* config variables */
  94 static unsigned int triton1=0;
  95 static unsigned int vsfx=0;
  96 static unsigned int latency = UNSET;
  97 int no_overlay=-1;
  98
  99 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 100 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 104 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 105 #ifdef MODULE
 106 static unsigned int autoload = 1;
 107 #else
 108 static unsigned int autoload = 0;
 109 #endif
 110 static unsigned int gpiomask = UNSET;
 111 static unsigned int audioall = UNSET;
 112 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 113
 114 /* insmod options */
 115 module_param(triton1,    int, 0444);
 116 module_param(vsfx,       int, 0444);
 117 module_param(no_overlay, int, 0444);
 118 module_param(latency,    int, 0444);
 119 module_param(gpiomask,   int, 0444);
 120 module_param(audioall,   int, 0444);
 121 module_param(autoload,   int, 0444);
 122
 123 module_param_array(card,     int, NULL, 0444);
 124 module_param_array(pll,      int, NULL, 0444);
 125 module_param_array(tuner,    int, NULL, 0444);
 126 module_param_array(svhs,     int, NULL, 0444);
 127 module_param_array(remote,   int, NULL, 0444);
 128 module_param_array(audiomux, int, NULL, 0444);
 129
 130 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 131                  "[enable bug compatibility for triton1 + others]");
 132 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 133                  "[yet another chipset flaw workaround]");
 134 MODULE_PARM_DESC(latency,"pci latency timer");
 135 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 136 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 137 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 138 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
 139
 140 /* ----------------------------------------------------------------------- */
 141 /* list of card IDs for bt878+ cards                                       */
 142
 143 static struct CARD {
 144         unsigned id;
 145         int cardnr;
 146         char *name;
 147 } cards[] __devinitdata = {
 148         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 149         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 150         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 151         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 152         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 153         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 154         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 155         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 156         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 157
 158         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 159         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 160
 161         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 162         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 163         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 164         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 165         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 166         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 167         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 168         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 169         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 170
 171         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 172         /* some cards ship with byteswapped IDs ... */
 173         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 174         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 175         /* this seems to happen as well ... */
 176         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 177
 178         { 0x3000121a, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 179         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM/ VoodooTV 200" },
 180         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 181
 182         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 183         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 184         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 185         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 186         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 187         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 188         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 189
 190         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 191         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 192         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 193         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 194         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 195
 196         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 197         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 198         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 199         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 200
 201         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 202         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 203         /* clashes with FlyVideo
 204          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 205         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 206         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 207         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 208         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 209
 210         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 211         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 212         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 213         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 214         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 215
 216         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 217         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 218         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 219         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 220         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 221
 222         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 223         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 224         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 225         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 226
 227         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 228         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 229         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 230         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 231
 232         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 233         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 234         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 235         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 236         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 237         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 238         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 239         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 240         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 241         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 242         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 243         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 244         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 245         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 247         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 248         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 249         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 250         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 251         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 252         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 253         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 254         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 255         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 256         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 257
 258         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 259         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 260
 261         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 262         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 263         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 264         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 265         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 266         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 267
 268         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 269         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 270
 271         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 272         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 273         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 274         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
 275         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 276         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 277         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 278         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 279         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 280         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 281
 282         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 283         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 284
 285         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 286         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 287         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 288         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 289
 290         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 291
 292         /* likely broken, vendor id doesn't match the other magic views ...
 293          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 294
 295         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 296         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 297
 298         /* DVB cards (using pci function .1 for mpeg data xfer) */
 299         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 300         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 301         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 302         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 303         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 304         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 305         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 306         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 307         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 308
 309         { 0, -1, NULL }
 310 };
 311
 312 /* ----------------------------------------------------------------------- */
 313 /* array with description for bt848 / bt878 tv/grabber cards               */
 314
 315 struct tvcard bttv_tvcards[] = {
 316         /* ---- card 0x00 ---------------------------------- */
 317         [BTTV_BOARD_UNKNOWN] = {
 318                 .name           = " *** UNKNOWN/GENERIC *** ",
 319                 .video_inputs   = 4,
 320                 .audio_inputs   = 1,
 321                 .tuner          = 0,
 322                 .svhs           = 2,
 323                 .muxsel         = { 2, 3, 1, 0},
 324                 .tuner_type     = -1,
 325                 .tuner_addr     = ADDR_UNSET,
 326                 .radio_addr     = ADDR_UNSET,
 327         },
 328         [BTTV_BOARD_MIRO] = {
 329                 .name           = "MIRO PCTV",
 330                 .video_inputs   = 4,
 331                 .audio_inputs   = 1,
 332                 .tuner          = 0,
 333                 .svhs           = 2,
 334                 .gpiomask       = 15,
 335                 .muxsel         = { 2, 3, 1, 1},
 336                 .audiomux       = { 2, 0, 0, 0, 10},
 337                 .needs_tvaudio  = 1,
 338                 .tuner_type     = -1,
 339                 .tuner_addr     = ADDR_UNSET,
 340                 .radio_addr     = ADDR_UNSET,
 341         },
 342         [BTTV_BOARD_HAUPPAUGE] = {
 343                 .name           = "Hauppauge (bt848)",
 344                 .video_inputs   = 4,
 345                 .audio_inputs   = 1,
 346                 .tuner          = 0,
 347                 .svhs           = 2,
 348                 .gpiomask       = 7,
 349                 .muxsel         = { 2, 3, 1, 1},
 350                 .audiomux       = { 0, 1, 2, 3, 4},
 351                 .needs_tvaudio  = 1,
 352                 .tuner_type     = -1,
 353                 .tuner_addr     = ADDR_UNSET,
 354                 .radio_addr     = ADDR_UNSET,
 355         },
 356         [BTTV_BOARD_STB] = {
 357                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 358                 .video_inputs   = 3,
 359                 .audio_inputs   = 1,
 360                 .tuner          = 0,
 361                 .svhs           = 2,
 362                 .gpiomask       = 7,
 363                 .muxsel         = { 2, 3, 1, 1},
 364                 .audiomux       = { 4, 0, 2, 3, 1},
 365                 .no_msp34xx     = 1,
 366                 .needs_tvaudio  = 1,
 367                 .tuner_type     = TUNER_PHILIPS_NTSC,
 368                 .tuner_addr     = ADDR_UNSET,
 369                 .radio_addr     = ADDR_UNSET,
 370                 .pll            = PLL_28,
 371                 .has_radio      = 1,
 372         },
 373
 374         /* ---- card 0x04 ---------------------------------- */
 375         [BTTV_BOARD_INTEL] = {
 376                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 377                 .video_inputs   = 4,
 378                 .audio_inputs   = 0,
 379                 .tuner          = -1,
 380                 .svhs           = 2,
 381                 .gpiomask       = 0,
 382                 .muxsel         = { 2, 3, 1, 1},
 383                 .audiomux       = { 0 },
 384                 .needs_tvaudio  = 0,
 385                 .tuner_type     = 4,
 386                 .tuner_addr     = ADDR_UNSET,
 387                 .radio_addr     = ADDR_UNSET,
 388         },
 389         [BTTV_BOARD_DIAMOND] = {
 390                 .name           = "Diamond DTV2000",
 391                 .video_inputs   = 4,
 392                 .audio_inputs   = 1,
 393                 .tuner          = 0,
 394                 .svhs           = 2,
 395                 .gpiomask       = 3,
 396                 .muxsel         = { 2, 3, 1, 0},
 397                 .audiomux       = { 0, 1, 0, 1, 3},
 398                 .needs_tvaudio  = 1,
 399                 .tuner_type     = -1,
 400                 .tuner_addr     = ADDR_UNSET,
 401                 .radio_addr     = ADDR_UNSET,
 402         },
 403         [BTTV_BOARD_AVERMEDIA] = {
 404                 .name           = "AVerMedia TVPhone",
 405                 .video_inputs   = 3,
 406                 .audio_inputs   = 1,
 407                 .tuner          = 0,
 408                 .svhs           = 3,
 409                 .muxsel         = { 2, 3, 1, 1},
 410                 .gpiomask       = 0x0f,
 411                 .audiomux       = { 0x0c, 0x04, 0x08, 0x04, 0},
 412                 /*                0x04 for some cards ?? */
 413                 .needs_tvaudio  = 1,
 414                 .tuner_type     = -1,
 415                 .tuner_addr     = ADDR_UNSET,
 416                 .radio_addr     = ADDR_UNSET,
 417                 .audio_hook     = avermedia_tvphone_audio,
 418                 .has_remote     = 1,
 419         },
 420         [BTTV_BOARD_MATRIX_VISION] = {
 421                 .name           = "MATRIX-Vision MV-Delta",
 422                 .video_inputs   = 5,
 423                 .audio_inputs   = 1,
 424                 .tuner          = -1,
 425                 .svhs           = 3,
 426                 .gpiomask       = 0,
 427                 .muxsel         = { 2, 3, 1, 0, 0},
 428                 .audiomux       = {0 },
 429                 .needs_tvaudio  = 1,
 430                 .tuner_type     = -1,
 431                 .tuner_addr     = ADDR_UNSET,
 432                 .radio_addr     = ADDR_UNSET,
 433         },
 434
 435         /* ---- card 0x08 ---------------------------------- */
 436         [BTTV_BOARD_FLYVIDEO] = {
 437                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 438                 .video_inputs   = 4,
 439                 .audio_inputs   = 1,
 440                 .tuner          = 0,
 441                 .svhs           = 2,
 442                 .gpiomask       = 0xc00,
 443                 .muxsel         = { 2, 3, 1, 1},
 444                 .audiomux       = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
 445                 .needs_tvaudio  = 1,
 446                 .pll            = PLL_28,
 447                 .tuner_type     = -1,
 448                 .tuner_addr     = ADDR_UNSET,
 449                 .radio_addr     = ADDR_UNSET,
 450         },
 451         [BTTV_BOARD_TURBOTV] = {
 452                 .name           = "IMS/IXmicro TurboTV",
 453                 .video_inputs   = 3,
 454                 .audio_inputs   = 1,
 455                 .tuner          = 0,
 456                 .svhs           = 2,
 457                 .gpiomask       = 3,
 458                 .muxsel         = { 2, 3, 1, 1},
 459                 .audiomux       = { 1, 1, 2, 3, 0},
 460                 .needs_tvaudio  = 0,
 461                 .pll            = PLL_28,
 462                 .tuner_type     = TUNER_TEMIC_PAL,
 463                 .tuner_addr     = ADDR_UNSET,
 464                 .radio_addr     = ADDR_UNSET,
 465         },
 466         [BTTV_BOARD_HAUPPAUGE878] = {
 467                 .name           = "Hauppauge (bt878)",
 468                 .video_inputs   = 4,
 469                 .audio_inputs   = 1,
 470                 .tuner          = 0,
 471                 .svhs           = 2,
 472                 .gpiomask       = 0x0f, /* old: 7 */
 473                 .muxsel         = { 2, 0, 1, 1},
 474                 .audiomux       = { 0, 1, 2, 3, 4},
 475                 .needs_tvaudio  = 1,
 476                 .pll            = PLL_28,
 477                 .tuner_type     = -1,
 478                 .tuner_addr     = ADDR_UNSET,
 479                 .radio_addr     = ADDR_UNSET,
 480         },
 481         [BTTV_BOARD_MIROPRO] = {
 482                 .name           = "MIRO PCTV pro",
 483                 .video_inputs   = 3,
 484                 .audio_inputs   = 1,
 485                 .tuner          = 0,
 486                 .svhs           = 2,
 487                 .gpiomask       = 0x3014f,
 488                 .muxsel         = { 2, 3, 1, 1},
 489                 .audiomux       = { 0x20001,0x10001, 0, 0,10},
 490                 .needs_tvaudio  = 1,
 491                 .tuner_type     = -1,
 492                 .tuner_addr     = ADDR_UNSET,
 493                 .radio_addr     = ADDR_UNSET,
 494         },
 495
 496         /* ---- card 0x0c ---------------------------------- */
 497         [BTTV_BOARD_ADSTECH_TV] = {
 498                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 499                 .video_inputs   = 3,
 500                 .audio_inputs   = 1,
 501                 .tuner          = 0,
 502                 .svhs           = 2,
 503                 .gpiomask       = 15,
 504                 .muxsel         = { 2, 3, 1, 1},
 505                 .audiomux       = { 13, 14, 11, 7, 0, 0},
 506                 .needs_tvaudio  = 1,
 507                 .tuner_type     = -1,
 508                 .tuner_addr     = ADDR_UNSET,
 509                 .radio_addr     = ADDR_UNSET,
 510         },
 511         [BTTV_BOARD_AVERMEDIA98] = {
 512                 .name           = "AVerMedia TVCapture 98",
 513                 .video_inputs   = 3,
 514                 .audio_inputs   = 4,
 515                 .tuner          = 0,
 516                 .svhs           = 2,
 517                 .gpiomask       = 15,
 518                 .muxsel         = { 2, 3, 1, 1},
 519                 .audiomux       = { 13, 14, 11, 7, 0, 0},
 520                 .needs_tvaudio  = 1,
 521                 .msp34xx_alt    = 1,
 522                 .pll            = PLL_28,
 523                 .tuner_type     = TUNER_PHILIPS_PAL,
 524                 .tuner_addr     = ADDR_UNSET,
 525                 .radio_addr     = ADDR_UNSET,
 526                 .audio_hook     = avermedia_tv_stereo_audio,
 527                 .no_gpioirq     = 1,
 528         },
 529         [BTTV_BOARD_VHX] = {
 530                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 531                 .video_inputs   = 3,
 532                 .audio_inputs   = 1,
 533                 .tuner          = 0,
 534                 .svhs           = 2,
 535                 .gpiomask       = 7,
 536                 .muxsel         = { 2, 3, 1, 1},
 537                 .audiomux       = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
 538                 .needs_tvaudio  = 1,
 539                 .pll            = PLL_28,
 540                 .tuner_type     = -1,
 541                 .tuner_addr     = ADDR_UNSET,
 542                 .radio_addr     = ADDR_UNSET,
 543         },
 544         [BTTV_BOARD_ZOLTRIX] = {
 545                 .name           = "Zoltrix TV-Max",
 546                 .video_inputs   = 3,
 547                 .audio_inputs   = 1,
 548                 .tuner          = 0,
 549                 .svhs           = 2,
 550                 .gpiomask       = 15,
 551                 .muxsel         = { 2, 3, 1, 1},
 552                 .audiomux       = {0 , 0, 1 , 0, 10},
 553                 .needs_tvaudio  = 1,
 554                 .tuner_type     = -1,
 555                 .tuner_addr     = ADDR_UNSET,
 556                 .radio_addr     = ADDR_UNSET,
 557         },
 558
 559         /* ---- card 0x10 ---------------------------------- */
 560         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 561                 .name           = "Prolink Pixelview PlayTV (bt878)",
 562                 .video_inputs   = 3,
 563                 .audio_inputs   = 1,
 564                 .tuner          = 0,
 565                 .svhs           = 2,
 566                 .gpiomask       = 0x01fe00,
 567                 .muxsel         = { 2, 3, 1, 1},
 568         #if 0
 569                 /* old */
 570                 .audiomux       = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
 571         #else
 572                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 573                 .audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
 574         #endif
 575                 .needs_tvaudio  = 1,
 576                 .pll            = PLL_28,
 577                 .tuner_type     = -1,
 578         },
 579         [BTTV_BOARD_WINVIEW_601] = {
 580                 .name           = "Leadtek WinView 601",
 581                 .video_inputs   = 3,
 582                 .audio_inputs   = 1,
 583                 .tuner          = 0,
 584                 .svhs           = 2,
 585                 .gpiomask       = 0x8300f8,
 586                 .muxsel         = { 2, 3, 1, 1,0},
 587                 .audiomux       = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
 588                 .needs_tvaudio  = 1,
 589                 .tuner_type     = -1,
 590                 .tuner_addr     = ADDR_UNSET,
 591                 .radio_addr     = ADDR_UNSET,
 592                 .audio_hook     = winview_audio,
 593                 .has_radio      = 1,
 594         },
 595         [BTTV_BOARD_AVEC_INTERCAP] = {
 596                 .name           = "AVEC Intercapture",
 597                 .video_inputs   = 3,
 598                 .audio_inputs   = 2,
 599                 .tuner          = 0,
 600                 .svhs           = 2,
 601                 .gpiomask       = 0,
 602                 .muxsel         = {2, 3, 1, 1},
 603                 .audiomux       = {1, 0, 0, 0, 0},
 604                 .needs_tvaudio  = 1,
 605                 .tuner_type     = -1,
 606                 .tuner_addr     = ADDR_UNSET,
 607                 .radio_addr     = ADDR_UNSET,
 608         },
 609         [BTTV_BOARD_LIFE_FLYKIT] = {
 610                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 611                 .video_inputs   = 4,
 612                 .audio_inputs   = 1,
 613                 .tuner          = -1,
 614                 .svhs           = -1,
 615                 .gpiomask       = 0x8dff00,
 616                 .muxsel         = { 2, 3, 1, 1},
 617                 .audiomux       = { 0 },
 618                 .no_msp34xx     = 1,
 619                 .tuner_type     = -1,
 620                 .tuner_addr     = ADDR_UNSET,
 621                 .radio_addr     = ADDR_UNSET,
 622         },
 623
 624         /* ---- card 0x14 ---------------------------------- */
 625         [BTTV_BOARD_CEI_RAFFLES] = {
 626                 .name           = "CEI Raffles Card",
 627                 .video_inputs   = 3,
 628                 .audio_inputs   = 3,
 629                 .tuner          = 0,
 630                 .svhs           = 2,
 631                 .muxsel         = {2, 3, 1, 1},
 632                 .tuner_type     = -1,
 633                 .tuner_addr     = ADDR_UNSET,
 634                 .radio_addr     = ADDR_UNSET,
 635         },
 636         [BTTV_BOARD_CONFERENCETV] = {
 637                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 638                 .video_inputs   = 4,
 639                 .audio_inputs   = 2,  /* tuner, line in */
 640                 .tuner          = 0,
 641                 .svhs           = 2,
 642                 .gpiomask       = 0x1800,
 643                 .muxsel         = { 2, 3, 1, 1},
 644                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800},
 645                 .pll            = PLL_28,
 646                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 647                 .tuner_addr     = ADDR_UNSET,
 648                 .radio_addr     = ADDR_UNSET,
 649         },
 650         [BTTV_BOARD_PHOEBE_TVMAS] = {
 651                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 652                 .video_inputs   = 3,
 653                 .audio_inputs   = 1,
 654                 .tuner          = 0,
 655                 .svhs           = 2,
 656                 .gpiomask       = 0xc00,
 657                 .muxsel         = { 2, 3, 1, 1},
 658                 .audiomux       = {0, 1, 0x800, 0x400, 0xc00, 0},
 659                 .needs_tvaudio  = 1,
 660                 .pll            = PLL_28,
 661                 .tuner_type     = -1,
 662                 .tuner_addr     = ADDR_UNSET,
 663                 .radio_addr     = ADDR_UNSET,
 664         },
 665         [BTTV_BOARD_MODTEC_205] = {
 666                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 667                 .video_inputs   = 3,
 668                 .audio_inputs   = 1,
 669                 .tuner          = 0,
 670                 .svhs           = -1,
 671                 .gpiomask       = 7,
 672                 .muxsel         = { 2, 3, -1 },
 673                 .digital_mode   = DIGITAL_MODE_CAMERA,
 674                 .audiomux       = { 0, 0, 0, 0, 0 },
 675                 .no_msp34xx     = 1,
 676                 .pll            = PLL_28,
 677                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 678                 .tuner_addr     = ADDR_UNSET,
 679                 .radio_addr     = ADDR_UNSET,
 680         },
 681
 682         /* ---- card 0x18 ---------------------------------- */
 683         [BTTV_BOARD_MAGICTVIEW061] = {
 684                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 685                 .video_inputs   = 3,
 686                 .audio_inputs   = 1,
 687                 .tuner          = 0,
 688                 .svhs           = 2,
 689                 .gpiomask       = 0xe00,
 690                 .muxsel         = { 2, 3, 1, 1},
 691                 .audiomux       = {0x400, 0x400, 0x400, 0x400, 0xc00},
 692                 .needs_tvaudio  = 1,
 693                 .pll            = PLL_28,
 694                 .tuner_type     = -1,
 695                 .tuner_addr     = ADDR_UNSET,
 696                 .radio_addr     = ADDR_UNSET,
 697                 .has_remote     = 1,
 698         },
 699         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 700                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 701                 .video_inputs   = 3,
 702                 .audio_inputs   = 1,
 703                 .tuner          = 0,
 704                 .svhs           = 2,
 705                 .gpiomask       = 0x1f0fff,
 706                 .muxsel         = { 2, 3, 1, 1},
 707                 .audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
 708                 .needs_tvaudio  = 0,
 709                 .tuner_type     = TUNER_PHILIPS_PAL,
 710                 .tuner_addr     = ADDR_UNSET,
 711                 .radio_addr     = ADDR_UNSET,
 712                 .audio_hook     = terratv_audio,
 713         },
 714         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 715                 .name           = "Hauppauge WinCam newer (bt878)",
 716                 .video_inputs   = 4,
 717                 .audio_inputs   = 1,
 718                 .tuner          = 0,
 719                 .svhs           = 3,
 720                 .gpiomask       = 7,
 721                 .muxsel         = { 2, 0, 1, 1},
 722                 .audiomux       = { 0, 1, 2, 3, 4},
 723                 .needs_tvaudio  = 1,
 724                 .tuner_type     = -1,
 725                 .tuner_addr     = ADDR_UNSET,
 726                 .radio_addr     = ADDR_UNSET,
 727         },
 728         [BTTV_BOARD_MAXI] = {
 729                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 730                 .video_inputs   = 4,
 731                 .audio_inputs   = 2,
 732                 .tuner          = 0,
 733                 .svhs           = 2,
 734                 .gpiomask       = 0x1800,
 735                 .muxsel         = { 2, 3, 1, 1},
 736                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800},
 737                 .pll            = PLL_28,
 738                 .tuner_type     = TUNER_PHILIPS_SECAM,
 739                 .tuner_addr     = ADDR_UNSET,
 740                 .radio_addr     = ADDR_UNSET,
 741         },
 742
 743         /* ---- card 0x1c ---------------------------------- */
 744         [BTTV_BOARD_TERRATV] = {
 745                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 746                 .video_inputs   = 3,
 747                 .audio_inputs   = 1,
 748                 .tuner          = 0,
 749                 .svhs           = 2,
 750                 .gpiomask       = 0x1f0fff,
 751                 .muxsel         = { 2, 3, 1, 1},
 752                 .audiomux       = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
 753                 .needs_tvaudio  = 0,
 754                 .tuner_type     = TUNER_PHILIPS_PAL,
 755                 .tuner_addr     = ADDR_UNSET,
 756                 .radio_addr     = ADDR_UNSET,
 757                 .audio_hook     = terratv_audio,
 758                 /* GPIO wiring:
 759                 External 20 pin connector (for Active Radio Upgrade board)
 760                 gpio00: i2c-sda
 761                 gpio01: i2c-scl
 762                 gpio02: om5610-data
 763                 gpio03: om5610-clk
 764                 gpio04: om5610-wre
 765                 gpio05: om5610-stereo
 766                 gpio06: rds6588-davn
 767                 gpio07: Pin 7 n.c.
 768                 gpio08: nIOW
 769                 gpio09+10: nIOR, nSEL ?? (bt878)
 770                         gpio09: nIOR (bt848)
 771                         gpio10: nSEL (bt848)
 772                 Sound Routing:
 773                 gpio16: u2-A0 (1st 4052bt)
 774                 gpio17: u2-A1
 775                 gpio18: u2-nEN
 776                 gpio19: u4-A0 (2nd 4052)
 777                 gpio20: u4-A1
 778                         u4-nEN - GND
 779                 Btspy:
 780                         00000 : Cdrom (internal audio input)
 781                         10000 : ext. Video audio input
 782                         20000 : TV Mono
 783                         a0000 : TV Mono/2
 784                 1a0000 : TV Stereo
 785                         30000 : Radio
 786                         40000 : Mute
 787         */
 788
 789         },
 790         [BTTV_BOARD_PXC200] = {
 791                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 792                 .name           = "Imagenation PXC200",
 793                 .video_inputs   = 5,
 794                 .audio_inputs   = 1,
 795                 .tuner          = -1,
 796                 .svhs           = 1, /* was: 4 */
 797                 .gpiomask       = 0,
 798                 .muxsel         = { 2, 3, 1, 0, 0},
 799                 .audiomux       = { 0 },
 800                 .needs_tvaudio  = 1,
 801                 .tuner_type     = -1,
 802                 .tuner_addr     = ADDR_UNSET,
 803                 .radio_addr     = ADDR_UNSET,
 804                 .muxsel_hook    = PXC200_muxsel,
 805
 806         },
 807         [BTTV_BOARD_FLYVIDEO_98] = {
 808                 .name           = "Lifeview FlyVideo 98 LR50",
 809                 .video_inputs   = 4,
 810                 .audio_inputs   = 1,
 811                 .tuner          = 0,
 812                 .svhs           = 2,
 813                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 814                 .muxsel         = { 2, 3, 1, 1},
 815                 .audiomux       = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
 816                 .pll            = PLL_28,
 817                 .tuner_type     = -1,
 818                 .tuner_addr     = ADDR_UNSET,
 819                 .radio_addr     = ADDR_UNSET,
 820         },
 821         [BTTV_BOARD_IPROTV] = {
 822                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 823                 .video_inputs   = 4,
 824                 .audio_inputs   = 1,
 825                 .tuner          = 0,
 826                 .svhs           = 3,
 827                 .gpiomask       = 1,
 828                 .muxsel         = { 2, 3, 1, 1},
 829                 .audiomux       = { 1, 0, 0, 0, 0 },
 830                 .pll            = PLL_28,
 831                 .tuner_type     = TUNER_PHILIPS_PAL,
 832                 .tuner_addr     = ADDR_UNSET,
 833                 .radio_addr     = ADDR_UNSET,
 834         },
 835
 836         /* ---- card 0x20 ---------------------------------- */
 837         [BTTV_BOARD_INTEL_C_S_PCI] = {
 838                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 839                 .video_inputs   = 4,
 840                 .audio_inputs   = 0,
 841                 .tuner          = -1,
 842                 .svhs           = 2,
 843                 .gpiomask       = 0,
 844                 .muxsel         = { 2, 3, 1, 1},
 845                 .audiomux       = { 0 },
 846                 .needs_tvaudio  = 0,
 847                 .tuner_type     = 4,
 848                 .tuner_addr     = ADDR_UNSET,
 849                 .radio_addr     = ADDR_UNSET,
 850         },
 851         [BTTV_BOARD_TERRATVALUE] = {
 852                 .name           = "Terratec TerraTValue Version Bt878",
 853                 .video_inputs   = 3,
 854                 .audio_inputs   = 1,
 855                 .tuner          = 0,
 856                 .svhs           = 2,
 857                 .gpiomask       = 0xffff00,
 858                 .muxsel         = { 2, 3, 1, 1},
 859                 .audiomux       = { 0x500, 0, 0x300, 0x900, 0x900},
 860                 .needs_tvaudio  = 1,
 861                 .pll            = PLL_28,
 862                 .tuner_type     = TUNER_PHILIPS_PAL,
 863                 .tuner_addr     = ADDR_UNSET,
 864                 .radio_addr     = ADDR_UNSET,
 865         },
 866         [BTTV_BOARD_WINFAST2000] = {
 867                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 868                 .video_inputs   = 4,
 869                 .audio_inputs   = 1,
 870                 .tuner          = 0,
 871                 .svhs           = 2,
 872                 .muxsel         = { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
 873         #if 0
 874                 .gpiomask       = 0xc33000,
 875                 .audiomux       = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
 876         #else
 877                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 878                 .gpiomask       = 0xb33000,
 879                 .audiomux       = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
 880         #endif
 881                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 882                         gpio23 -- hef4052:nEnable (0x800000)
 883                         gpio12 -- hef4052:A1
 884                         gpio13 -- hef4052:A0
 885                 0x0000: external audio
 886                 0x1000: FM
 887                 0x2000: TV
 888                 0x3000: n.c.
 889                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 890                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 891                 */
 892                 .needs_tvaudio  = 0,
 893                 .pll            = PLL_28,
 894                 .has_radio      = 1,
 895                 .tuner_type     = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 896                 .tuner_addr     = ADDR_UNSET,
 897                 .radio_addr     = ADDR_UNSET,
 898                 .audio_hook     = winfast2000_audio,
 899                 .has_remote     = 1,
 900         },
 901         [BTTV_BOARD_CHRONOS_VS2] = {
 902                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 903                 .video_inputs   = 4,
 904                 .audio_inputs   = 3,
 905                 .tuner          = 0,
 906                 .svhs           = 2,
 907                 .gpiomask       = 0x1800,
 908                 .muxsel         = { 2, 3, 1, 1},
 909                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800},
 910                 .pll            = PLL_28,
 911                 .tuner_type     = -1,
 912                 .tuner_addr     = ADDR_UNSET,
 913                 .radio_addr     = ADDR_UNSET,
 914         },
 915
 916         /* ---- card 0x24 ---------------------------------- */
 917         [BTTV_BOARD_TYPHOON_TVIEW] = {
 918                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 919                 .video_inputs   = 4,
 920                 .audio_inputs   = 3,
 921                 .tuner          = 0,
 922                 .svhs           = 2,
 923                 .gpiomask       = 0x1800,
 924                 .muxsel         = { 2, 3, 1, 1},
 925                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
 926                 .pll            = PLL_28,
 927                 .tuner_type     = -1,
 928                 .tuner_addr     = ADDR_UNSET,
 929                 .radio_addr     = ADDR_UNSET,
 930                 .has_radio      = 1,
 931         },
 932         [BTTV_BOARD_PXELVWPLTVPRO] = {
 933                 .name           = "Prolink PixelView PlayTV pro",
 934                 .video_inputs   = 3,
 935                 .audio_inputs   = 1,
 936                 .tuner          = 0,
 937                 .svhs           = 2,
 938                 .gpiomask       = 0xff,
 939                 .muxsel         = { 2, 3, 1, 1 },
 940                 .audiomux       = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
 941                 .no_msp34xx     = 1,
 942                 .pll            = PLL_28,
 943                 .tuner_type     = -1,
 944                 .tuner_addr     = ADDR_UNSET,
 945                 .radio_addr     = ADDR_UNSET,
 946         },
 947         [BTTV_BOARD_MAGICTVIEW063] = {
 948                 .name           = "Askey CPH06X TView99",
 949                 .video_inputs   = 4,
 950                 .audio_inputs   = 1,
 951                 .tuner          = 0,
 952                 .svhs           = 2,
 953                 .gpiomask       = 0x551e00,
 954                 .muxsel         = { 2, 3, 1, 0},
 955                 .audiomux       = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
 956                 .needs_tvaudio  = 1,
 957                 .pll            = PLL_28,
 958                 .tuner_type     = 1,
 959                 .tuner_addr     = ADDR_UNSET,
 960                 .radio_addr     = ADDR_UNSET,
 961                 .has_remote     = 1,
 962         },
 963         [BTTV_BOARD_PINNACLE] = {
 964                 .name           = "Pinnacle PCTV Studio/Rave",
 965                 .video_inputs   = 3,
 966                 .audio_inputs   = 1,
 967                 .tuner          = 0,
 968                 .svhs           = 2,
 969                 .gpiomask       = 0x03000F,
 970                 .muxsel         = { 2, 3, 1, 1},
 971                 .audiomux       = { 2, 0xd0001, 0, 0, 1},
 972                 .needs_tvaudio  = 0,
 973                 .pll            = PLL_28,
 974                 .tuner_type     = -1,
 975                 .tuner_addr     = ADDR_UNSET,
 976                 .radio_addr     = ADDR_UNSET,
 977         },
 978
 979         /* ---- card 0x28 ---------------------------------- */
 980         [BTTV_BOARD_STB2] = {
 981                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 982                 .video_inputs   = 3,
 983                 .audio_inputs   = 1,
 984                 .tuner          = 0,
 985                 .svhs           = 2,
 986                 .gpiomask       = 7,
 987                 .muxsel         = { 2, 3, 1, 1},
 988                 .audiomux       = { 4, 0, 2, 3, 1},
 989                 .no_msp34xx     = 1,
 990                 .needs_tvaudio  = 1,
 991                 .tuner_type     = TUNER_PHILIPS_NTSC,
 992                 .tuner_addr     = ADDR_UNSET,
 993                 .radio_addr     = ADDR_UNSET,
 994                 .pll            = PLL_28,
 995                 .has_radio      = 1,
 996         },
 997         [BTTV_BOARD_AVPHONE98] = {
 998                 .name           = "AVerMedia TVPhone 98",
 999                 .video_inputs   = 3,
1000                 .audio_inputs   = 4,
1001                 .tuner          = 0,
1002                 .svhs           = 2,
1003                 .gpiomask       = 15,
1004                 .muxsel         = { 2, 3, 1, 1},
1005                 .audiomux       = { 13, 4, 11, 7, 0, 0},
1006                 .needs_tvaudio  = 1,
1007                 .pll            = PLL_28,
1008                 .tuner_type     = -1,
1009                 .tuner_addr     = ADDR_UNSET,
1010                 .radio_addr     = ADDR_UNSET,
1011                 .has_radio      = 1,
1012                 .audio_hook     = avermedia_tvphone_audio,
1013         },
1014         [BTTV_BOARD_PV951] = {
1015                 .name           = "ProVideo PV951", /* pic16c54 */
1016                 .video_inputs   = 3,
1017                 .audio_inputs   = 1,
1018                 .tuner          = 0,
1019                 .svhs           = 2,
1020                 .gpiomask       = 0,
1021                 .muxsel         = { 2, 3, 1, 1},
1022                 .audiomux       = { 0, 0, 0, 0, 0},
1023                 .needs_tvaudio  = 1,
1024                 .no_msp34xx     = 1,
1025                 .pll            = PLL_28,
1026                 .tuner_type     = 1,
1027                 .tuner_addr     = ADDR_UNSET,
1028                 .radio_addr     = ADDR_UNSET,
1029         },
1030         [BTTV_BOARD_ONAIR_TV] = {
1031                 .name           = "Little OnAir TV",
1032                 .video_inputs   = 3,
1033                 .audio_inputs   = 1,
1034                 .tuner          = 0,
1035                 .svhs           = 2,
1036                 .gpiomask       = 0xe00b,
1037                 .muxsel         = {2, 3, 1, 1},
1038                 .audiomux       = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
1039                 .no_msp34xx     = 1,
1040                 .tuner_type     = -1,
1041                 .tuner_addr     = ADDR_UNSET,
1042                 .radio_addr     = ADDR_UNSET,
1043         },
1044
1045         /* ---- card 0x2c ---------------------------------- */
1046         [BTTV_BOARD_SIGMA_TVII_FM] = {
1047                 .name           = "Sigma TVII-FM",
1048                 .video_inputs   = 2,
1049                 .audio_inputs   = 1,
1050                 .tuner          = 0,
1051                 .svhs           = -1,
1052                 .gpiomask       = 3,
1053                 .muxsel         = {2, 3, 1, 1},
1054                 .audiomux       = {1, 1, 0, 2, 3},
1055                 .no_msp34xx     = 1,
1056                 .pll            = PLL_NONE,
1057                 .tuner_type     = -1,
1058                 .tuner_addr     = ADDR_UNSET,
1059                 .radio_addr     = ADDR_UNSET,
1060         },
1061         [BTTV_BOARD_MATRIX_VISION2] = {
1062                 .name           = "MATRIX-Vision MV-Delta 2",
1063                 .video_inputs   = 5,
1064                 .audio_inputs   = 1,
1065                 .tuner          = -1,
1066                 .svhs           = 3,
1067                 .gpiomask       = 0,
1068                 .muxsel         = { 2, 3, 1, 0, 0},
1069                 .audiomux       = {0 },
1070                 .no_msp34xx     = 1,
1071                 .pll            = PLL_28,
1072                 .tuner_type     = -1,
1073                 .tuner_addr     = ADDR_UNSET,
1074                 .radio_addr     = ADDR_UNSET,
1075         },
1076         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1077                 .name           = "Zoltrix Genie TV/FM",
1078                 .video_inputs   = 3,
1079                 .audio_inputs   = 1,
1080                 .tuner          = 0,
1081                 .svhs           = 2,
1082                 .gpiomask       = 0xbcf03f,
1083                 .muxsel         = { 2, 3, 1, 1},
1084                 .audiomux       = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
1085                 .no_msp34xx     = 1,
1086                 .pll            = PLL_28,
1087                 .tuner_type     = 21,
1088                 .tuner_addr     = ADDR_UNSET,
1089                 .radio_addr     = ADDR_UNSET,
1090         },
1091         [BTTV_BOARD_TERRATVRADIO] = {
1092                 .name           = "Terratec TV/Radio+",
1093                 .video_inputs   = 3,
1094                 .audio_inputs   = 1,
1095                 .tuner          = 0,
1096                 .svhs           = 2,
1097                 .gpiomask       = 0x70000,
1098                 .muxsel         = { 2, 3, 1, 1},
1099                 .audiomux       = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
1100                 .needs_tvaudio  = 1,
1101                 .no_msp34xx     = 1,
1102                 .pll            = PLL_35,
1103                 .tuner_type     = 1,
1104                 .tuner_addr     = ADDR_UNSET,
1105                 .radio_addr     = ADDR_UNSET,
1106                 .has_radio      = 1,
1107         },
1108
1109         /* ---- card 0x30 ---------------------------------- */
1110         [BTTV_BOARD_DYNALINK] = {
1111                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1112                 .video_inputs   = 3,
1113                 .audio_inputs   = 1,
1114                 .tuner          = 0,
1115                 .svhs           = 2,
1116                 .gpiomask       = 15,
1117                 .muxsel         = { 2, 3, 1, 1},
1118                 .audiomux       = {2,0,0,0,1},
1119                 .needs_tvaudio  = 1,
1120                 .pll            = PLL_28,
1121                 .tuner_type     = -1,
1122                 .tuner_addr     = ADDR_UNSET,
1123                 .radio_addr     = ADDR_UNSET,
1124         },
1125         [BTTV_BOARD_GVBCTV3PCI] = {
1126                 .name           = "IODATA GV-BCTV3/PCI",
1127                 .video_inputs   = 3,
1128                 .audio_inputs   = 1,
1129                 .tuner          = 0,
1130                 .svhs           = 2,
1131                 .gpiomask       = 0x010f00,
1132                 .muxsel         = {2, 3, 0, 0},
1133                 .audiomux       = {0x10000, 0, 0x10000, 0, 0, 0},
1134                 .no_msp34xx     = 1,
1135                 .pll            = PLL_28,
1136                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1137                 .tuner_addr     = ADDR_UNSET,
1138                 .radio_addr     = ADDR_UNSET,
1139                 .audio_hook     = gvbctv3pci_audio,
1140         },
1141         [BTTV_BOARD_PXELVWPLTVPAK] = {
1142                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1143                 .video_inputs   = 5,
1144                 .audio_inputs   = 1,
1145                 .tuner          = 0,
1146                 .svhs           = 3,
1147                 .gpiomask       = 0xAA0000,
1148                 .muxsel         = { 2,3,1,1,-1 },
1149                 .digital_mode   = DIGITAL_MODE_CAMERA,
1150                 .audiomux       = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000  },
1151                 .no_msp34xx     = 1,
1152                 .pll            = PLL_28,
1153                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1154                 .tuner_addr     = ADDR_UNSET,
1155                 .radio_addr     = ADDR_UNSET,
1156                 .has_remote     = 1,
1157                 /* GPIO wiring: (different from Rev.4C !)
1158                         GPIO17: U4.A0 (first hef4052bt)
1159                         GPIO19: U4.A1
1160                         GPIO20: U5.A1 (second hef4052bt)
1161                         GPIO21: U4.nEN
1162                         GPIO22: BT832 Reset Line
1163                         GPIO23: A5,A0, U5,nEN
1164                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1165                 */
1166         },
1167         [BTTV_BOARD_EAGLE] = {
1168                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1169                 .video_inputs   = 4,
1170                 .audio_inputs   = 1,
1171                 .tuner          = 0,
1172                 .svhs           = 2,
1173                 .gpiomask       = 7,
1174                 .muxsel         = { 2, 0, 1, 1},
1175                 .audiomux       = { 0, 1, 2, 3, 4},
1176                 .pll            = PLL_28,
1177                 .tuner_type     = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1178                 .tuner_addr     = ADDR_UNSET,
1179                 .radio_addr     = ADDR_UNSET,
1180         },
1181
1182         /* ---- card 0x34 ---------------------------------- */
1183         [BTTV_BOARD_PINNACLEPRO] = {
1184                 /* David Härdeman <david@2gen.com> */
1185                 .name           = "Pinnacle PCTV Studio Pro",
1186                 .video_inputs   = 4,
1187                 .audio_inputs   = 1,
1188                 .tuner          = 0,
1189                 .svhs           = 3,
1190                 .gpiomask       = 0x03000F,
1191                 .muxsel         = { 2, 3, 1, 1},
1192                 .audiomux       = { 1, 0xd0001, 0, 0, 10},
1193                                 /* sound path (5 sources):
1194                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1195                                         0= ext. Audio IN
1196                                         1= from MUX2
1197                                         2= Mono TV sound from Tuner
1198                                         3= not connected
1199                                 MUX2 (mask 0x30000):
1200                                         0,2,3= from MSP34xx
1201                                         1= FM stereo Radio from Tuner */
1202                 .needs_tvaudio  = 0,
1203                 .pll            = PLL_28,
1204                 .tuner_type     = -1,
1205                 .tuner_addr     = ADDR_UNSET,
1206                 .radio_addr     = ADDR_UNSET,
1207         },
1208         [BTTV_BOARD_TVIEW_RDS_FM] = {
1209                 /* Claas Langbehn <claas@bigfoot.com>,
1210                 Sven Grothklags <sven@upb.de> */
1211                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1212                 .video_inputs   = 4,
1213                 .audio_inputs   = 3,
1214                 .tuner          = 0,
1215                 .svhs           = 2,
1216                 .gpiomask       = 0x1c,
1217                 .muxsel         = { 2, 3, 1, 1},
1218                 .audiomux       = { 0, 0, 0x10, 8, 4 },
1219                 .needs_tvaudio  = 1,
1220                 .pll            = PLL_28,
1221                 .tuner_type     = TUNER_PHILIPS_PAL,
1222                 .tuner_addr     = ADDR_UNSET,
1223                 .radio_addr     = ADDR_UNSET,
1224                 .has_radio      = 1,
1225         },
1226         [BTTV_BOARD_LIFETEC_9415] = {
1227                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1228                 in de.comp.os.unix.linux.hardware:
1229                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1230                         audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1231                         options tuner type=5 */
1232                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1233                 .video_inputs   = 4,
1234                 .audio_inputs   = 1,
1235                 .tuner          = 0,
1236                 .svhs           = 2,
1237                 .gpiomask       = 0x18e0,
1238                 .muxsel         = { 2, 3, 1, 1},
1239                 .audiomux       = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1240                         /* For cards with tda9820/tda9821:
1241                                 0x0000: Tuner normal stereo
1242                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1243                                 0x0880: Tuner A2 stereo */
1244                 .pll            = PLL_28,
1245                 .tuner_type     = -1,
1246                 .tuner_addr     = ADDR_UNSET,
1247                 .radio_addr     = ADDR_UNSET,
1248         },
1249         [BTTV_BOARD_BESTBUY_EASYTV] = {
1250                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1251                 old Easy TV BT848 version (model CPH031) */
1252                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1253                 .video_inputs   = 4,
1254                 .audio_inputs   = 1,
1255                 .tuner          = 0,
1256                 .svhs           = 2,
1257                 .gpiomask       = 0xF,
1258                 .muxsel         = { 2, 3, 1, 0},
1259                 .audiomux       = { 2, 0, 0, 0, 10},
1260                 .needs_tvaudio  = 0,
1261                 .pll            = PLL_28,
1262                 .tuner_type     = TUNER_TEMIC_PAL,
1263                 .tuner_addr     = ADDR_UNSET,
1264                 .radio_addr     = ADDR_UNSET,
1265         },
1266
1267         /* ---- card 0x38 ---------------------------------- */
1268         [BTTV_BOARD_FLYVIDEO_98FM] = {
1269                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1270                 .name           = "Lifeview FlyVideo 98FM LR50",
1271                 .video_inputs   = 4,
1272                 .audio_inputs   = 3,
1273                 .tuner          = 0,
1274                 .svhs           = 2,
1275                 .gpiomask       = 0x1800,
1276                 .muxsel         = { 2, 3, 1, 1},
1277                 .audiomux       = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1278                 .pll            = PLL_28,
1279                 .tuner_type     = 5,
1280                 .tuner_addr     = ADDR_UNSET,
1281                 .radio_addr     = ADDR_UNSET,
1282         },
1283                 /* This is the ultimate cheapo capture card
1284                 * just a BT848A on a small PCB!
1285                 * Steve Hosgood <steve@equiinet.com> */
1286         [BTTV_BOARD_GRANDTEC] = {
1287                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1288                 .video_inputs   = 2,
1289                 .audio_inputs   = 0,
1290                 .tuner          = -1,
1291                 .svhs           = 1,
1292                 .gpiomask       = 0,
1293                 .muxsel         = { 3, 1 },
1294                 .audiomux       = { 0 },
1295                 .needs_tvaudio  = 0,
1296                 .no_msp34xx     = 1,
1297                 .pll            = PLL_35,
1298                 .tuner_type     = -1,
1299                 .tuner_addr     = ADDR_UNSET,
1300                 .radio_addr     = ADDR_UNSET,
1301         },
1302         [BTTV_BOARD_ASKEY_CPH060] = {
1303                 /* Daniel Herrington <daniel.herrington@home.com> */
1304                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1305                 .video_inputs   = 3,
1306                 .audio_inputs   = 1,
1307                 .tuner          = 0,
1308                 .svhs           = 2,
1309                 .gpiomask       = 0xe00,
1310                 .muxsel         = { 2, 3, 1, 1},
1311                 .audiomux       = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1312                 .needs_tvaudio  = 1,
1313                 .pll            = PLL_28,
1314                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1315                 .tuner_addr     = ADDR_UNSET,
1316                 .radio_addr     = ADDR_UNSET,
1317         },
1318         [BTTV_BOARD_ASKEY_CPH03X] = {
1319                 /* Matti Mottus <mottus@physic.ut.ee> */
1320                 .name           = "Askey CPH03x TV Capturer",
1321                 .video_inputs   = 4,
1322                 .audio_inputs   = 1,
1323                 .tuner          = 0,
1324                 .svhs           = 2,
1325                 .gpiomask       = 0x03000F,
1326                 .muxsel         = { 2, 3, 1, 0},
1327                 .audiomux       = { 2,0,0,0,1 },
1328                 .pll            = PLL_28,
1329                 .tuner_type     = 0,
1330                 .tuner_addr     = ADDR_UNSET,
1331                 .radio_addr     = ADDR_UNSET,
1332         },
1333
1334         /* ---- card 0x3c ---------------------------------- */
1335         [BTTV_BOARD_MM100PCTV] = {
1336                 /* Philip Blundell <philb@gnu.org> */
1337                 .name           = "Modular Technology MM100PCTV",
1338                 .video_inputs   = 2,
1339                 .audio_inputs   = 2,
1340                 .tuner          = 0,
1341                 .svhs           = -1,
1342                 .gpiomask       = 11,
1343                 .muxsel         = { 2, 3, 1, 1},
1344                 .audiomux       = { 2, 0, 0, 1, 8},
1345                 .pll            = PLL_35,
1346                 .tuner_type     = TUNER_TEMIC_PAL,
1347                 .tuner_addr     = ADDR_UNSET,
1348                 .radio_addr     = ADDR_UNSET,
1349         },
1350         [BTTV_BOARD_GMV1] = {
1351                 /* Adrian Cox <adrian@humboldt.co.uk */
1352                 .name           = "AG Electronics GMV1",
1353                 .video_inputs   = 2,
1354                 .audio_inputs   = 0,
1355                 .tuner          = -1,
1356                 .svhs           = 1,
1357                 .gpiomask       = 0xF,
1358                 .muxsel         = { 2, 2},
1359                 .audiomux       = { },
1360                 .no_msp34xx     = 1,
1361                 .needs_tvaudio  = 0,
1362                 .pll            = PLL_28,
1363                 .tuner_type     = -1,
1364                 .tuner_addr     = ADDR_UNSET,
1365                 .radio_addr     = ADDR_UNSET,
1366         },
1367         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1368                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1369                 new Easy TV BT878 version (model CPH061)
1370                 special thanks to Informatica Mieres for providing the card */
1371                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1372                 .video_inputs   = 3,
1373                 .audio_inputs   = 2,
1374                 .tuner          = 0,
1375                 .svhs           = 2,
1376                 .gpiomask       = 0xFF,
1377                 .muxsel         = { 2, 3, 1, 0},
1378                 .audiomux       = { 1, 0, 4, 4, 9},
1379                 .needs_tvaudio  = 0,
1380                 .pll            = PLL_28,
1381                 .tuner_type     = TUNER_PHILIPS_PAL,
1382                 .tuner_addr     = ADDR_UNSET,
1383                 .radio_addr     = ADDR_UNSET,
1384         },
1385         [BTTV_BOARD_ATI_TVWONDER] = {
1386                 /* Lukas Gebauer <geby@volny.cz> */
1387                 .name           = "ATI TV-Wonder",
1388                 .video_inputs   = 3,
1389                 .audio_inputs   = 1,
1390                 .tuner          = 0,
1391                 .svhs           = 2,
1392                 .gpiomask       = 0xf03f,
1393                 .muxsel         = { 2, 3, 1, 0 },
1394                 .audiomux       = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1395                 .pll            = PLL_28,
1396                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1397                 .tuner_addr     = ADDR_UNSET,
1398                 .radio_addr     = ADDR_UNSET,
1399         },
1400
1401         /* ---- card 0x40 ---------------------------------- */
1402         [BTTV_BOARD_ATI_TVWONDERVE] = {
1403                 /* Lukas Gebauer <geby@volny.cz> */
1404                 .name           = "ATI TV-Wonder VE",
1405                 .video_inputs   = 2,
1406                 .audio_inputs   = 1,
1407                 .tuner          = 0,
1408                 .svhs           = -1,
1409                 .gpiomask       = 1,
1410                 .muxsel         = { 2, 3, 0, 1},
1411                 .audiomux       = { 0, 0, 1, 0, 0},
1412                 .no_msp34xx     = 1,
1413                 .pll            = PLL_28,
1414                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1415                 .tuner_addr     = ADDR_UNSET,
1416                 .radio_addr     = ADDR_UNSET,
1417         },
1418         [BTTV_BOARD_FLYVIDEO2000] = {
1419                 /* DeeJay <deejay@westel900.net (2000S) */
1420                 .name           = "Lifeview FlyVideo 2000S LR90",
1421                 .video_inputs   = 3,
1422                 .audio_inputs   = 3,
1423                 .tuner          = 0,
1424                 .svhs           = 2,
1425                 .gpiomask       = 0x18e0,
1426                 .muxsel         = { 2, 3, 0, 1},
1427                                 /* Radio changed from 1e80 to 0x800 to make
1428                                 FlyVideo2000S in .hu happy (gm)*/
1429                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1430                 .audiomux       = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1431                 .audio_hook     = fv2000s_audio,
1432                 .no_msp34xx     = 1,
1433                 .no_tda9875     = 1,
1434                 .needs_tvaudio  = 1,
1435                 .pll            = PLL_28,
1436                 .tuner_type     = 5,
1437                 .tuner_addr     = ADDR_UNSET,
1438                 .radio_addr     = ADDR_UNSET,
1439         },
1440         [BTTV_BOARD_TERRATVALUER] = {
1441                 .name           = "Terratec TValueRadio",
1442                 .video_inputs   = 3,
1443                 .audio_inputs   = 1,
1444                 .tuner          = 0,
1445                 .svhs           = 2,
1446                 .gpiomask       = 0xffff00,
1447                 .muxsel         = { 2, 3, 1, 1},
1448                 .audiomux       = { 0x500, 0x500, 0x300, 0x900, 0x900},
1449                 .needs_tvaudio  = 1,
1450                 .pll            = PLL_28,
1451                 .tuner_type     = TUNER_PHILIPS_PAL,
1452                 .tuner_addr     = ADDR_UNSET,
1453                 .radio_addr     = ADDR_UNSET,
1454                 .has_radio      = 1,
1455         },
1456         [BTTV_BOARD_GVBCTV4PCI] = {
1457                 /* TANAKA Kei <peg00625@nifty.com> */
1458                 .name           = "IODATA GV-BCTV4/PCI",
1459                 .video_inputs   = 3,
1460                 .audio_inputs   = 1,
1461                 .tuner          = 0,
1462                 .svhs           = 2,
1463                 .gpiomask       = 0x010f00,
1464                 .muxsel         = {2, 3, 0, 0},
1465                 .audiomux       = {0x10000, 0, 0x10000, 0, 0, 0},
1466                 .no_msp34xx     = 1,
1467                 .pll            = PLL_28,
1468                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1469                 .tuner_addr     = ADDR_UNSET,
1470                 .radio_addr     = ADDR_UNSET,
1471                 .audio_hook     = gvbctv3pci_audio,
1472         },
1473
1474         /* ---- card 0x44 ---------------------------------- */
1475         [BTTV_BOARD_VOODOOTV_FM] = {
1476                 .name           = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1477                 /* try "insmod msp3400 simple=0" if you have
1478                 * sound problems with this card. */
1479                 .video_inputs   = 4,
1480                 .audio_inputs   = 1,
1481                 .tuner          = 0,
1482                 .svhs           = -1,
1483                 .gpiomask       = 0x4f8a00,
1484                 /* 0x100000: 1=MSP enabled (0=disable again)
1485                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1486                 .audiomux       = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1487                 /* tvtuner, radio,   external,internal, mute,  stereo
1488                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1489                 .muxsel         = { 2, 3 ,0 ,1},
1490                 .tuner_type     = TUNER_MT2032,
1491                 .tuner_addr     = ADDR_UNSET,
1492                 .radio_addr     = ADDR_UNSET,
1493                 .pll            = PLL_28,
1494                 .has_radio      = 1,
1495         },
1496         [BTTV_BOARD_AIMMS] = {
1497                 /* Philip Blundell <pb@nexus.co.uk> */
1498                 .name           = "Active Imaging AIMMS",
1499                 .video_inputs   = 1,
1500                 .audio_inputs   = 0,
1501                 .tuner          = -1,
1502                 .tuner_type     = -1,
1503                 .tuner_addr     = ADDR_UNSET,
1504                 .radio_addr     = ADDR_UNSET,
1505                 .pll            = PLL_28,
1506                 .muxsel         = { 2 },
1507                 .gpiomask       = 0
1508         },
1509         [BTTV_BOARD_PV_BT878P_PLUS] = {
1510                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1511                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1512                 .video_inputs   = 3,
1513                 .audio_inputs   = 4,
1514                 .tuner          = 0,
1515                 .svhs           = 2,
1516                 .gpiomask       = 15,
1517                 .muxsel         = { 2, 3, 1, 1},
1518                 .audiomux       = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
1519                 .needs_tvaudio  = 1,
1520                 .pll            = PLL_28,
1521                 .tuner_type     = 25,
1522                 .tuner_addr     = ADDR_UNSET,
1523                 .radio_addr     = ADDR_UNSET,
1524                 .has_remote     = 1,
1525                 /* GPIO wiring:
1526                         GPIO0: U4.A0 (hef4052bt)
1527                         GPIO1: U4.A1
1528                         GPIO2: U4.A1 (second hef4052bt)
1529                         GPIO3: U4.nEN, U5.A0, A5.nEN
1530                         GPIO8-15: vrd866b ?
1531                 */
1532         },
1533         [BTTV_BOARD_FLYVIDEO98EZ] = {
1534                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1535                 .video_inputs   = 4,
1536                 .audio_inputs   = 0,
1537                 .tuner          = -1,
1538                 .svhs           = 2,
1539                 .muxsel         = { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1540                 .pll            = PLL_28,
1541                 .no_msp34xx     = 1,
1542                 .tuner_type     = UNSET,
1543                 .tuner_addr     = ADDR_UNSET,
1544                 .radio_addr     = ADDR_UNSET,
1545         },
1546
1547         /* ---- card 0x48 ---------------------------------- */
1548         [BTTV_BOARD_PV_BT878P_9B] = {
1549                 /* Dariusz Kowalewski <darekk@automex.pl> */
1550                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1551                 .video_inputs   = 4,
1552                 .audio_inputs   = 1,
1553                 .tuner          = 0,
1554                 .svhs           = 2,
1555                 .gpiomask       = 0x3f,
1556                 .muxsel         = { 2, 3, 1, 1 },
1557                 .audiomux       = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1558                 .needs_tvaudio  = 1,
1559                 .no_msp34xx     = 1,
1560                 .no_tda9875     = 1,
1561                 .pll            = PLL_28,
1562                 .tuner_type     = 5,
1563                 .tuner_addr     = ADDR_UNSET,
1564                 .radio_addr     = ADDR_UNSET,
1565                 .audio_hook     = pvbt878p9b_audio, /* Note: not all cards have stereo */
1566                 .has_radio      = 1,  /* Note: not all cards have radio */
1567                 .has_remote     = 1,
1568                 /* GPIO wiring:
1569                         GPIO0: A0 hef4052
1570                         GPIO1: A1 hef4052
1571                         GPIO3: nEN hef4052
1572                         GPIO8-15: vrd866b
1573                         GPIO20,22,23: R30,R29,R28
1574                 */
1575         },
1576         [BTTV_BOARD_SENSORAY311] = {
1577                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1578                 /* you must jumper JP5 for the card to work */
1579                 .name           = "Sensoray 311",
1580                 .video_inputs   = 5,
1581                 .audio_inputs   = 0,
1582                 .tuner          = -1,
1583                 .svhs           = 4,
1584                 .gpiomask       = 0,
1585                 .muxsel         = { 2, 3, 1, 0, 0},
1586                 .audiomux       = { 0 },
1587                 .needs_tvaudio  = 0,
1588                 .tuner_type     = -1,
1589                 .tuner_addr     = ADDR_UNSET,
1590                 .radio_addr     = ADDR_UNSET,
1591         },
1592         [BTTV_BOARD_RV605] = {
1593                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1594                 .name           = "RemoteVision MX (RV605)",
1595                 .video_inputs   = 16,
1596                 .audio_inputs   = 0,
1597                 .tuner          = -1,
1598                 .svhs           = -1,
1599                 .gpiomask       = 0x00,
1600                 .gpiomask2      = 0x07ff,
1601                 .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1602                                 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1603                 .no_msp34xx     = 1,
1604                 .no_tda9875     = 1,
1605                 .tuner_type     = -1,
1606                 .tuner_addr     = ADDR_UNSET,
1607                 .radio_addr     = ADDR_UNSET,
1608                 .muxsel_hook    = rv605_muxsel,
1609         },
1610         [BTTV_BOARD_POWERCLR_MTV878] = {
1611                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1612                 .video_inputs   = 3,
1613                 .audio_inputs   = 2,
1614                 .tuner          = 0,
1615                 .svhs           = 2,
1616                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1617                 .muxsel         = { 2, 1, 1, },
1618                 .audiomux       = { 0, 1, 2, 2, 4 },
1619                 .needs_tvaudio  = 0,
1620                 .tuner_type     = TUNER_PHILIPS_PAL,
1621                 .tuner_addr     = ADDR_UNSET,
1622                 .radio_addr     = ADDR_UNSET,
1623                 .pll            = PLL_28,
1624                 .has_radio      = 1,
1625         },
1626
1627         /* ---- card 0x4c ---------------------------------- */
1628         [BTTV_BOARD_WINDVR] = {
1629                 /* Masaki Suzuki <masaki@btree.org> */
1630                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1631                 .video_inputs   = 3,
1632                 .audio_inputs   = 1,
1633                 .tuner          = 0,
1634                 .svhs           = 2,
1635                 .gpiomask       = 0x140007,
1636                 .muxsel         = { 2, 3, 1, 1 },
1637                 .audiomux       = { 0, 1, 2, 3, 4, 0 },
1638                 .tuner_type     = TUNER_PHILIPS_NTSC,
1639                 .tuner_addr     = ADDR_UNSET,
1640                 .radio_addr     = ADDR_UNSET,
1641                 .audio_hook     = windvr_audio,
1642         },
1643         [BTTV_BOARD_GRANDTEC_MULTI] = {
1644                 .name           = "GrandTec Multi Capture Card (Bt878)",
1645                 .video_inputs   = 4,
1646                 .audio_inputs   = 0,
1647                 .tuner          = -1,
1648                 .svhs           = -1,
1649                 .gpiomask       = 0,
1650                 .muxsel         = { 2, 3, 1, 0 },
1651                 .audiomux       = { 0 },
1652                 .needs_tvaudio  = 0,
1653                 .no_msp34xx     = 1,
1654                 .pll            = PLL_28,
1655                 .tuner_type     = -1,
1656                 .tuner_addr     = ADDR_UNSET,
1657                 .radio_addr     = ADDR_UNSET,
1658         },
1659         [BTTV_BOARD_KWORLD] = {
1660                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1661                 .video_inputs   = 4,
1662                 .audio_inputs   = 3,
1663                 .tuner          = 0,
1664                 .svhs           = 2,
1665                 .gpiomask       = 7,
1666                 .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1667                 .audiomux       = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
1668                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1669                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1670                                                 * This card lacks PCI subsystem ID, sigh.
1671                                                 * audiomux=1: lower volume, 2+3: mute
1672                                                 * btwincap uses 0x80000/0x80003
1673                                                 */
1674                 .needs_tvaudio  = 0,
1675                 .no_msp34xx     = 1,
1676                 .pll            = PLL_28,
1677                 .tuner_type     = 5,
1678                 .tuner_addr     = ADDR_UNSET,
1679                 .radio_addr     = ADDR_UNSET,
1680                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1681                 radio signal strength indicators work fine. */
1682                 .has_radio      = 1,
1683                 /* GPIO Info:
1684                         GPIO0,1:   HEF4052 A0,A1
1685                         GPIO2:     HEF4052 nENABLE
1686                         GPIO3-7:   n.c.
1687                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1688                         GPIO14,15: ??
1689                         GPIO16-21: n.c.
1690                         GPIO22,23: ??
1691                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1692         },
1693         [BTTV_BOARD_DSP_TCVIDEO] = {
1694                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1695                 .name           = "DSP Design TCVIDEO",
1696                 .video_inputs   = 4,
1697                 .svhs           = -1,
1698                 .muxsel         = { 2, 3, 1, 0},
1699                 .pll            = PLL_28,
1700                 .tuner_type     = -1,
1701                 .tuner_addr     = ADDR_UNSET,
1702                 .radio_addr     = ADDR_UNSET,
1703         },
1704
1705                 /* ---- card 0x50 ---------------------------------- */
1706         [BTTV_BOARD_HAUPPAUGEPVR] = {
1707                 .name           = "Hauppauge WinTV PVR",
1708                 .video_inputs   = 4,
1709                 .audio_inputs   = 1,
1710                 .tuner          = 0,
1711                 .svhs           = 2,
1712                 .muxsel         = { 2, 0, 1, 1},
1713                 .needs_tvaudio  = 1,
1714                 .pll            = PLL_28,
1715                 .tuner_type     = -1,
1716                 .tuner_addr     = ADDR_UNSET,
1717                 .radio_addr     = ADDR_UNSET,
1718
1719                 .gpiomask       = 7,
1720                 .audiomux       = {7},
1721         },
1722         [BTTV_BOARD_GVBCTV5PCI] = {
1723                 .name           = "IODATA GV-BCTV5/PCI",
1724                 .video_inputs   = 3,
1725                 .audio_inputs   = 1,
1726                 .tuner          = 0,
1727                 .svhs           = 2,
1728                 .gpiomask       = 0x0f0f80,
1729                 .muxsel         = {2, 3, 1, 0},
1730                 .audiomux       = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1731                 .no_msp34xx     = 1,
1732                 .pll            = PLL_28,
1733                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1734                 .tuner_addr     = ADDR_UNSET,
1735                 .radio_addr     = ADDR_UNSET,
1736                 .audio_hook     = gvbctv5pci_audio,
1737                 .has_radio      = 1,
1738         },
1739         [BTTV_BOARD_OSPREY1x0] = {
1740                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1741                 .video_inputs   = 4,                  /* id-inputs-clock */
1742                 .audio_inputs   = 0,
1743                 .tuner          = -1,
1744                 .svhs           = 3,
1745                 .muxsel         = { 3, 2, 0, 1 },
1746                 .pll            = PLL_28,
1747                 .tuner_type     = -1,
1748                 .tuner_addr     = ADDR_UNSET,
1749                 .radio_addr     = ADDR_UNSET,
1750                 .no_msp34xx     = 1,
1751                 .no_tda9875     = 1,
1752                 .no_tda7432     = 1,
1753         },
1754         [BTTV_BOARD_OSPREY1x0_848] = {
1755                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1756                 .video_inputs   = 3,
1757                 .audio_inputs   = 0,
1758                 .tuner          = -1,
1759                 .svhs           = 2,
1760                 .muxsel         = { 2, 3, 1 },
1761                 .pll            = PLL_28,
1762                 .tuner_type     = -1,
1763                 .tuner_addr     = ADDR_UNSET,
1764                 .radio_addr     = ADDR_UNSET,
1765                 .no_msp34xx     = 1,
1766                 .no_tda9875     = 1,
1767                 .no_tda7432     = 1,
1768         },
1769
1770                 /* ---- card 0x54 ---------------------------------- */
1771         [BTTV_BOARD_OSPREY101_848] = {
1772                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1773                 .video_inputs   = 2,
1774                 .audio_inputs   = 0,
1775                 .tuner          = -1,
1776                 .svhs           = 1,
1777                 .muxsel         = { 3, 1 },
1778                 .pll            = PLL_28,
1779                 .tuner_type     = -1,
1780                 .tuner_addr     = ADDR_UNSET,
1781                 .radio_addr     = ADDR_UNSET,
1782                 .no_msp34xx     = 1,
1783                 .no_tda9875     = 1,
1784                 .no_tda7432     = 1,
1785         },
1786         [BTTV_BOARD_OSPREY1x1] = {
1787                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1788                 .video_inputs   = 1,
1789                 .audio_inputs   = 0,
1790                 .tuner          = -1,
1791                 .svhs           = -1,
1792                 .muxsel         = { 0 },
1793                 .pll            = PLL_28,
1794                 .tuner_type     = -1,
1795                 .tuner_addr     = ADDR_UNSET,
1796                 .radio_addr     = ADDR_UNSET,
1797                 .no_msp34xx     = 1,
1798                 .no_tda9875     = 1,
1799                 .no_tda7432     = 1,
1800         },
1801         [BTTV_BOARD_OSPREY1x1_SVID] = {
1802                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1803                 .video_inputs   = 2,
1804                 .audio_inputs   = 0,
1805                 .tuner          = -1,
1806                 .svhs           = 1,
1807                 .muxsel         = { 0, 1 },
1808                 .pll            = PLL_28,
1809                 .tuner_type     = -1,
1810                 .tuner_addr     = ADDR_UNSET,
1811                 .radio_addr     = ADDR_UNSET,
1812                 .no_msp34xx     = 1,
1813                 .no_tda9875     = 1,
1814                 .no_tda7432     = 1,
1815         },
1816         [BTTV_BOARD_OSPREY2xx] = {
1817                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1818                 .video_inputs   = 1,
1819                 .audio_inputs   = 1,
1820                 .tuner          = -1,
1821                 .svhs           = -1,
1822                 .muxsel         = { 0 },
1823                 .pll            = PLL_28,
1824                 .tuner_type     = UNSET,
1825                 .tuner_addr     = ADDR_UNSET,
1826                 .radio_addr     = ADDR_UNSET,
1827                 .no_msp34xx     = 1,
1828                 .no_tda9875     = 1,
1829                 .no_tda7432     = 1,
1830         },
1831
1832                 /* ---- card 0x58 ---------------------------------- */
1833         [BTTV_BOARD_OSPREY2x0_SVID] = {
1834                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1835                 .video_inputs   = 2,
1836                 .audio_inputs   = 1,
1837                 .tuner          = -1,
1838                 .svhs           = 1,
1839                 .muxsel         = { 0, 1 },
1840                 .pll            = PLL_28,
1841                 .tuner_type     = UNSET,
1842                 .tuner_addr     = ADDR_UNSET,
1843                 .radio_addr     = ADDR_UNSET,
1844                 .no_msp34xx     = 1,
1845                 .no_tda9875     = 1,
1846                 .no_tda7432     = 1,
1847         },
1848         [BTTV_BOARD_OSPREY2x0] = {
1849                 .name           = "Osprey 210/220",   /* 0x1(A|B)-04C0-C1 */
1850                 .video_inputs   = 2,
1851                 .audio_inputs   = 1,
1852                 .tuner          = -1,
1853                 .svhs           = 1,
1854                 .muxsel         = { 2, 3 },
1855                 .pll            = PLL_28,
1856                 .tuner_type     = UNSET,
1857                 .tuner_addr     = ADDR_UNSET,
1858                 .radio_addr     = ADDR_UNSET,
1859                 .no_msp34xx     = 1,
1860                 .no_tda9875     = 1,
1861                 .no_tda7432     = 1,
1862         },
1863         [BTTV_BOARD_OSPREY500] = {
1864                 .name           = "Osprey 500",   /* 500 */
1865                 .video_inputs   = 2,
1866                 .audio_inputs   = 1,
1867                 .tuner          = -1,
1868                 .svhs           = 1,
1869                 .muxsel         = { 2, 3 },
1870                 .pll            = PLL_28,
1871                 .tuner_type     = -1,
1872                 .tuner_addr     = ADDR_UNSET,
1873                 .radio_addr     = ADDR_UNSET,
1874                 .no_msp34xx     = 1,
1875                 .no_tda9875     = 1,
1876                 .no_tda7432     = 1,
1877         },
1878         [BTTV_BOARD_OSPREY540] = {
1879                 .name           = "Osprey 540",   /* 540 */
1880                 .video_inputs   = 4,
1881                 .audio_inputs   = 1,
1882                 .tuner          = -1,
1883         #if 0 /* TODO ... */
1884                 .svhs           = OSPREY540_SVID_ANALOG,
1885                 .muxsel         = {       [OSPREY540_COMP_ANALOG] = 2,
1886                                         [OSPREY540_SVID_ANALOG] = 3, },
1887         #endif
1888                 .pll            = PLL_28,
1889                 .tuner_type     = -1,
1890                 .tuner_addr     = ADDR_UNSET,
1891                 .radio_addr     = ADDR_UNSET,
1892                 .no_msp34xx     = 1,
1893                 .no_tda9875     = 1,
1894                 .no_tda7432     = 1,
1895         #if 0 /* TODO ... */
1896                 .muxsel_hook    = osprey_540_muxsel,
1897                 .picture_hook   = osprey_540_set_picture,
1898         #endif
1899         },
1900
1901                 /* ---- card 0x5C ---------------------------------- */
1902         [BTTV_BOARD_OSPREY2000] = {
1903                 .name           = "Osprey 2000",  /* 2000 */
1904                 .video_inputs   = 2,
1905                 .audio_inputs   = 1,
1906                 .tuner          = -1,
1907                 .svhs           = 1,
1908                 .muxsel         = { 2, 3 },
1909                 .pll            = PLL_28,
1910                 .tuner_type     = UNSET,
1911                 .tuner_addr     = ADDR_UNSET,
1912                 .radio_addr     = ADDR_UNSET,
1913                 .no_msp34xx     = 1,
1914                 .no_tda9875     = 1,
1915                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1916         },
1917         [BTTV_BOARD_IDS_EAGLE] = {
1918                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1919                 .name           = "IDS Eagle",
1920                 .video_inputs   = 4,
1921                 .audio_inputs   = 0,
1922                 .tuner          = -1,
1923                 .tuner_type     = -1,
1924                 .tuner_addr     = ADDR_UNSET,
1925                 .radio_addr     = ADDR_UNSET,
1926                 .svhs           = -1,
1927                 .gpiomask       = 0,
1928                 .muxsel         = { 0, 1, 2, 3 },
1929                 .muxsel_hook    = eagle_muxsel,
1930                 .no_msp34xx     = 1,
1931                 .no_tda9875     = 1,
1932                 .pll            = PLL_28,
1933         },
1934         [BTTV_BOARD_PINNACLESAT] = {
1935                 .name           = "Pinnacle PCTV Sat",
1936                 .video_inputs   = 2,
1937                 .audio_inputs   = 0,
1938                 .svhs           = 1,
1939                 .tuner          = -1,
1940                 .tuner_type     = -1,
1941                 .tuner_addr     = ADDR_UNSET,
1942                 .radio_addr     = ADDR_UNSET,
1943                 .no_msp34xx     = 1,
1944                 .no_tda9875     = 1,
1945                 .no_tda7432     = 1,
1946                 .muxsel         = { 3, 0, 1, 2},
1947                 .pll            = PLL_28,
1948                 .no_gpioirq     = 1,
1949                 .has_dvb        = 1,
1950         },
1951         [BTTV_BOARD_FORMAC_PROTV] = {
1952                 .name           = "Formac ProTV II (bt878)",
1953                 .video_inputs   = 4,
1954                 .audio_inputs   = 1,
1955                 .tuner          = 0,
1956                 .svhs           = 3,
1957                 .gpiomask       = 2,
1958                 /* TV, Comp1, Composite over SVID con, SVID */
1959                 .muxsel         = { 2, 3, 1, 1},
1960                 .audiomux       = { 2, 2, 0, 0, 0 },
1961                 .pll            = PLL_28,
1962                 .has_radio      = 1,
1963                 .tuner_type     = TUNER_PHILIPS_PAL,
1964                 .tuner_addr     = ADDR_UNSET,
1965                 .radio_addr     = ADDR_UNSET,
1966         /* sound routing:
1967                 GPIO=0x00,0x01,0x03: mute (?)
1968                 0x02: both TV and radio (tuner: FM1216/I)
1969                 The card has onboard audio connectors labeled "cdrom" and "board",
1970                 not soldered here, though unknown wiring.
1971                 Card lacks: external audio in, pci subsystem id.
1972         */
1973         },
1974
1975                 /* ---- card 0x60 ---------------------------------- */
1976         [BTTV_BOARD_MACHTV] = {
1977                 .name           = "MachTV",
1978                 .video_inputs   = 3,
1979                 .audio_inputs   = 1,
1980                 .tuner          = 0,
1981                 .svhs           = -1,
1982                 .gpiomask       = 7,
1983                 .muxsel         = { 2, 3, 1, 1},
1984                 .audiomux       = { 0, 1, 2, 3, 4},
1985                 .needs_tvaudio  = 1,
1986                 .tuner_type     = 5,
1987                 .tuner_addr     = ADDR_UNSET,
1988                 .radio_addr     = ADDR_UNSET,
1989                 .pll            = PLL_28,
1990         },
1991         [BTTV_BOARD_EURESYS_PICOLO] = {
1992                 .name           = "Euresys Picolo",
1993                 .video_inputs   = 3,
1994                 .audio_inputs   = 0,
1995                 .tuner          = -1,
1996                 .svhs           = 2,
1997                 .gpiomask       = 0,
1998                 .no_msp34xx     = 1,
1999                 .no_tda9875     = 1,
2000                 .no_tda7432     = 1,
2001                 .muxsel         = { 2, 0, 1},
2002                 .pll            = PLL_28,
2003                 .tuner_type     = UNSET,
2004                 .tuner_addr     = ADDR_UNSET,
2005                 .radio_addr     = ADDR_UNSET,
2006         },
2007         [BTTV_BOARD_PV150] = {
2008                 /* Luc Van Hoeylandt <luc@e-magic.be> */
2009                 .name           = "ProVideo PV150", /* 0x4f */
2010                 .video_inputs   = 2,
2011                 .audio_inputs   = 0,
2012                 .tuner          = -1,
2013                 .svhs           = -1,
2014                 .gpiomask       = 0,
2015                 .muxsel         = { 2, 3 },
2016                 .audiomux       = { 0 },
2017                 .needs_tvaudio  = 0,
2018                 .no_msp34xx     = 1,
2019                 .pll            = PLL_28,
2020                 .tuner_type     = UNSET,
2021                 .tuner_addr     = ADDR_UNSET,
2022                 .radio_addr     = ADDR_UNSET,
2023         },
2024         [BTTV_BOARD_AD_TVK503] = {
2025                 /* Hiroshi Takekawa <sian@big.or.jp> */
2026                 /* This card lacks subsystem ID */
2027                 .name           = "AD-TVK503", /* 0x63 */
2028                 .video_inputs   = 4,
2029                 .audio_inputs   = 1,
2030                 .tuner          = 0,
2031                 .svhs           = 2,
2032                 .gpiomask       = 0x001e8007,
2033                 .muxsel         = { 2, 3, 1, 0 },
2034                 /*                  Tuner, Radio, external, internal, off,  on */
2035                 .audiomux       = { 0x08,  0x0f,  0x0a,     0x08,     0x0f, 0x08 },
2036                 .needs_tvaudio  = 0,
2037                 .no_msp34xx     = 1,
2038                 .pll            = PLL_28,
2039                 .tuner_type     = 2,
2040                 .tuner_addr     = ADDR_UNSET,
2041                 .radio_addr     = ADDR_UNSET,
2042                 .audio_hook     = adtvk503_audio,
2043         },
2044
2045                 /* ---- card 0x64 ---------------------------------- */
2046         [BTTV_BOARD_HERCULES_SM_TV] = {
2047                 .name           = "Hercules Smart TV Stereo",
2048                 .video_inputs   = 4,
2049                 .audio_inputs   = 1,
2050                 .tuner          = 0,
2051                 .svhs           = 2,
2052                 .gpiomask       = 0x00,
2053                 .muxsel         = { 2, 3, 1, 1 },
2054                 .needs_tvaudio  = 1,
2055                 .no_msp34xx     = 1,
2056                 .pll            = PLL_28,
2057                 .tuner_type     = 5,
2058                 .tuner_addr     = ADDR_UNSET,
2059                 .radio_addr     = ADDR_UNSET,
2060                 /* Notes:
2061                 - card lacks subsystem ID
2062                 - stereo variant w/ daughter board with tda9874a @0xb0
2063                 - Audio Routing:
2064                         always from tda9874 independent of GPIO (?)
2065                         external line in: unknown
2066                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2067                         hef4053 (instead 4052) for unknown function
2068                 */
2069         },
2070         [BTTV_BOARD_PACETV] = {
2071                 .name           = "Pace TV & Radio Card",
2072                 .video_inputs   = 4,
2073                 .audio_inputs   = 1,
2074                 .tuner          = 0,
2075                 .svhs           = 2,
2076                 .muxsel         = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
2077                 .gpiomask       = 0,
2078                 .no_tda9875     = 1,
2079                 .no_tda7432     = 1,
2080                 .tuner_type     = 1,
2081                 .tuner_addr     = ADDR_UNSET,
2082                 .radio_addr     = ADDR_UNSET,
2083                 .has_radio      = 1,
2084                 .pll            = PLL_28,
2085                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2086                 only internal line out: (4pin header) RGGL
2087                 Radio must be decoded by msp3410d (not routed through)*/
2088                 /*
2089                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
2090                 */
2091         },
2092         [BTTV_BOARD_IVC200] = {
2093                 /* Chris Willing <chris@vislab.usyd.edu.au> */
2094                 .name           = "IVC-200",
2095                 .video_inputs   = 1,
2096                 .audio_inputs   = 0,
2097                 .tuner          = -1,
2098                 .tuner_type     = -1,
2099                 .tuner_addr     = ADDR_UNSET,
2100                 .radio_addr     = ADDR_UNSET,
2101                 .svhs           = -1,
2102                 .gpiomask       = 0xdf,
2103                 .muxsel         = { 2 },
2104                 .pll            = PLL_28,
2105         },
2106         [BTTV_BOARD_XGUARD] = {
2107                 .name           = "Grand X-Guard / Trust 814PCI",
2108                 .video_inputs   = 16,
2109                 .audio_inputs   = 0,
2110                 .tuner          = -1,
2111                 .svhs           = -1,
2112                 .tuner_type     = 4,
2113                 .tuner_addr     = ADDR_UNSET,
2114                 .radio_addr     = ADDR_UNSET,
2115                 .gpiomask2      = 0xff,
2116                 .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2117                 .muxsel_hook    = xguard_muxsel,
2118                 .no_msp34xx     = 1,
2119                 .no_tda9875     = 1,
2120                 .no_tda7432     = 1,
2121                 .pll            = PLL_28,
2122         },
2123
2124                 /* ---- card 0x68 ---------------------------------- */
2125         [BTTV_BOARD_NEBULA_DIGITV] = {
2126                 .name           = "Nebula Electronics DigiTV",
2127                 .video_inputs   = 1,
2128                 .tuner          = -1,
2129                 .svhs           = -1,
2130                 .muxsel         = { 2, 3, 1, 0},
2131                 .no_msp34xx     = 1,
2132                 .no_tda9875     = 1,
2133                 .no_tda7432     = 1,
2134                 .pll            = PLL_28,
2135                 .tuner_type     = -1,
2136                 .tuner_addr     = ADDR_UNSET,
2137                 .radio_addr     = ADDR_UNSET,
2138                 .has_dvb        = 1,
2139                 .has_remote     = 1,
2140                 .gpiomask       = 0x1b,
2141                 .no_gpioirq     = 1,
2142         },
2143         [BTTV_BOARD_PV143] = {
2144                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2145                 .name           = "ProVideo PV143",
2146                 .video_inputs   = 4,
2147                 .audio_inputs   = 0,
2148                 .tuner          = -1,
2149                 .svhs           = -1,
2150                 .gpiomask       = 0,
2151                 .muxsel         = { 2, 3, 1, 0 },
2152                 .audiomux       = { 0 },
2153                 .needs_tvaudio  = 0,
2154                 .no_msp34xx     = 1,
2155                 .pll            = PLL_28,
2156                 .tuner_type     = -1,
2157                 .tuner_addr     = ADDR_UNSET,
2158                 .radio_addr     = ADDR_UNSET,
2159         },
2160         [BTTV_BOARD_VD009X1_MINIDIN] = {
2161                 /* M.Klahr@phytec.de */
2162                 .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2163                 .video_inputs   = 4,
2164                 .audio_inputs   = 0,
2165                 .tuner          = -1, /* card has no tuner */
2166                 .svhs           = 3,
2167                 .gpiomask       = 0x00,
2168                 .muxsel         = { 2, 3, 1, 0},
2169                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2170                 .needs_tvaudio  = 1,
2171                 .pll            = PLL_28,
2172                 .tuner_type     = -1,
2173                 .tuner_addr     = ADDR_UNSET,
2174                 .radio_addr     = ADDR_UNSET,
2175         },
2176         [BTTV_BOARD_VD009X1_COMBI] = {
2177                 .name           = "PHYTEC VD-009-X1 Combi (bt878)",
2178                 .video_inputs   = 4,
2179                 .audio_inputs   = 0,
2180                 .tuner          = -1, /* card has no tuner */
2181                 .svhs           = 3,
2182                 .gpiomask       = 0x00,
2183                 .muxsel         = { 2, 3, 1, 1},
2184                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2185                 .needs_tvaudio  = 1,
2186                 .pll            = PLL_28,
2187                 .tuner_type     = -1,
2188                 .tuner_addr     = ADDR_UNSET,
2189                 .radio_addr     = ADDR_UNSET,
2190         },
2191
2192                 /* ---- card 0x6c ---------------------------------- */
2193         [BTTV_BOARD_VD009_MINIDIN] = {
2194                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2195                 .video_inputs   = 10,
2196                 .audio_inputs   = 0,
2197                 .tuner          = -1, /* card has no tuner */
2198                 .svhs           = 9,
2199                 .gpiomask       = 0x00,
2200                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2201                                         via the upper nibble of muxsel. here: used for
2202                                         xternal video-mux */
2203                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2204                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2205                 .needs_tvaudio  = 1,
2206                 .pll            = PLL_28,
2207                 .tuner_type     = -1,
2208                 .tuner_addr     = ADDR_UNSET,
2209                 .radio_addr     = ADDR_UNSET,
2210         },
2211         [BTTV_BOARD_VD009_COMBI] = {
2212                 .name           = "PHYTEC VD-009 Combi (bt878)",
2213                 .video_inputs   = 10,
2214                 .audio_inputs   = 0,
2215                 .tuner          = -1, /* card has no tuner */
2216                 .svhs           = 9,
2217                 .gpiomask       = 0x00,
2218                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2219                                         via the upper nibble of muxsel. here: used for
2220                                         xternal video-mux */
2221                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2222                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2223                 .needs_tvaudio  = 1,
2224                 .pll            = PLL_28,
2225                 .tuner_type     = -1,
2226                 .tuner_addr     = ADDR_UNSET,
2227                 .radio_addr     = ADDR_UNSET,
2228         },
2229         [BTTV_BOARD_IVC100] = {
2230                 .name           = "IVC-100",
2231                 .video_inputs   = 4,
2232                 .audio_inputs   = 0,
2233                 .tuner          = -1,
2234                 .tuner_type     = -1,
2235                 .tuner_addr     = ADDR_UNSET,
2236                 .radio_addr     = ADDR_UNSET,
2237                 .svhs           = -1,
2238                 .gpiomask       = 0xdf,
2239                 .muxsel         = { 2, 3, 1, 0 },
2240                 .pll            = PLL_28,
2241         },
2242         [BTTV_BOARD_IVC120] = {
2243                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2244                 .name           = "IVC-120G",
2245                 .video_inputs   = 16,
2246                 .audio_inputs   = 0,    /* card has no audio */
2247                 .tuner          = -1,   /* card has no tuner */
2248                 .tuner_type     = -1,
2249                 .tuner_addr     = ADDR_UNSET,
2250                 .radio_addr     = ADDR_UNSET,
2251                 .svhs           = -1,   /* card has no svhs */
2252                 .needs_tvaudio  = 0,
2253                 .no_msp34xx     = 1,
2254                 .no_tda9875     = 1,
2255                 .no_tda7432     = 1,
2256                 .gpiomask       = 0x00,
2257                 .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2258                                 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2259                 .muxsel_hook    = ivc120_muxsel,
2260                 .pll            = PLL_28,
2261         },
2262
2263                 /* ---- card 0x70 ---------------------------------- */
2264         [BTTV_BOARD_PC_HDTV] = {
2265                 .name           = "pcHDTV HD-2000 TV",
2266                 .video_inputs   = 4,
2267                 .audio_inputs   = 1,
2268                 .tuner          = 0,
2269                 .svhs           = 2,
2270                 .muxsel         = { 2, 3, 1, 0},
2271                 .tuner_type     = TUNER_PHILIPS_ATSC,
2272                 .tuner_addr     = ADDR_UNSET,
2273                 .radio_addr     = ADDR_UNSET,
2274                 .has_dvb        = 1,
2275         },
2276         [BTTV_BOARD_TWINHAN_DST] = {
2277                 .name           = "Twinhan DST + clones",
2278                 .no_msp34xx     = 1,
2279                 .no_tda9875     = 1,
2280                 .no_tda7432     = 1,
2281                 .tuner_type     = TUNER_ABSENT,
2282                 .tuner_addr     = ADDR_UNSET,
2283                 .radio_addr     = ADDR_UNSET,
2284                 .no_video       = 1,
2285                 .has_dvb        = 1,
2286         },
2287         [BTTV_BOARD_WINFASTVC100] = {
2288                 .name           = "Winfast VC100",
2289                 .video_inputs   = 3,
2290                 .audio_inputs   = 0,
2291                 .svhs           = 1,
2292                 .tuner          = -1,
2293                 .muxsel         = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
2294                 .no_msp34xx     = 1,
2295                 .no_tda9875     = 1,
2296                 .no_tda7432     = 1,
2297                 .tuner_type     = TUNER_ABSENT,
2298                 .tuner_addr     = ADDR_UNSET,
2299                 .radio_addr     = ADDR_UNSET,
2300                 .pll            = PLL_28,
2301         },
2302         [BTTV_BOARD_TEV560] = {
2303                 .name           = "Teppro TEV-560/InterVision IV-560",
2304                 .video_inputs   = 3,
2305                 .audio_inputs   = 1,
2306                 .tuner          = 0,
2307                 .svhs           = 2,
2308                 .gpiomask       = 3,
2309                 .muxsel         = { 2, 3, 1, 1},
2310                 .audiomux       = { 1, 1, 1, 1, 0},
2311                 .needs_tvaudio  = 1,
2312                 .tuner_type     = TUNER_PHILIPS_PAL,
2313                 .tuner_addr     = ADDR_UNSET,
2314                 .radio_addr     = ADDR_UNSET,
2315                 .pll            = PLL_35,
2316         },
2317
2318                 /* ---- card 0x74 ---------------------------------- */
2319         [BTTV_BOARD_SIMUS_GVC1100] = {
2320                 .name           = "SIMUS GVC1100",
2321                 .video_inputs   = 4,
2322                 .audio_inputs   = 0,
2323                 .tuner          = -1,
2324                 .svhs           = -1,
2325                 .tuner_type     = -1,
2326                 .tuner_addr     = ADDR_UNSET,
2327                 .radio_addr     = ADDR_UNSET,
2328                 .pll            = PLL_28,
2329                 .muxsel         = { 2, 2, 2, 2},
2330                 .gpiomask       = 0x3F,
2331                 .muxsel_hook    = gvc1100_muxsel,
2332         },
2333         [BTTV_BOARD_NGSTV_PLUS] = {
2334                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2335                 .name           = "NGS NGSTV+",
2336                 .video_inputs   = 3,
2337                 .tuner          = 0,
2338                 .svhs           = 2,
2339                 .gpiomask       = 0x008007,
2340                 .muxsel         = {2, 3, 0, 0},
2341                 .audiomux       = {0, 0, 0, 0, 0x000003, 0},
2342                 .pll            = PLL_28,
2343                 .tuner_type     = TUNER_PHILIPS_PAL,
2344                 .tuner_addr     = ADDR_UNSET,
2345                 .radio_addr     = ADDR_UNSET,
2346                 .has_remote     = 1,
2347         },
2348         [BTTV_BOARD_LMLBT4] = {
2349                 /* http://linuxmedialabs.com */
2350                 .name           = "LMLBT4",
2351                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2352                 .audio_inputs   = 0,
2353                 .tuner          = -1,
2354                 .svhs           = -1,
2355                 .muxsel         = { 2, 3, 1, 0 },
2356                 .no_msp34xx     = 1,
2357                 .no_tda9875     = 1,
2358                 .no_tda7432     = 1,
2359                 .needs_tvaudio  = 0,
2360                 .tuner_type     = -1,
2361                 .tuner_addr     = ADDR_UNSET,
2362                 .radio_addr     = ADDR_UNSET,
2363         },
2364         [BTTV_BOARD_TEKRAM_M205] = {
2365                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2366                 .name           = "Tekram M205 PRO",
2367                 .video_inputs   = 3,
2368                 .audio_inputs   = 1,
2369                 .tuner          = 0,
2370                 .tuner_type     = TUNER_PHILIPS_PAL,
2371                 .tuner_addr     = ADDR_UNSET,
2372                 .radio_addr     = ADDR_UNSET,
2373                 .svhs           = 2,
2374                 .needs_tvaudio  = 0,
2375                 .gpiomask       = 0x68,
2376                 .muxsel         = { 2, 3, 1},
2377                 .audiomux       = { 0x68, 0x68, 0x61, 0x61, 0x00 },
2378                 .pll            = PLL_28,
2379         },
2380
2381                 /* ---- card 0x78 ---------------------------------- */
2382         [BTTV_BOARD_CONTVFMI] = {
2383                 /* Javier Cendan Ares <jcendan@lycos.es> */
2384                 /* bt878 TV + FM without subsystem ID */
2385                 .name           = "Conceptronic CONTVFMi",
2386                 .video_inputs   = 3,
2387                 .audio_inputs   = 1,
2388                 .tuner          = 0,
2389                 .svhs           = 2,
2390                 .gpiomask       = 0x008007,
2391                 .muxsel         = { 2, 3, 1, 1 },
2392                 .audiomux       = { 0, 1, 2, 2, 3 },
2393                 .needs_tvaudio  = 0,
2394                 .pll            = PLL_28,
2395                 .tuner_type     = TUNER_PHILIPS_PAL,
2396                 .tuner_addr     = ADDR_UNSET,
2397                 .radio_addr     = ADDR_UNSET,
2398                 .has_remote     = 1,
2399                 .has_radio      = 1,
2400         },
2401         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2402                 /*Eric DEBIEF <debief@telemsa.com>*/
2403                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2404                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2405                 /*0x79 in bttv.h*/
2406                 .name           = "Euresys Picolo Tetra",
2407                 .video_inputs   = 4,
2408                 .audio_inputs   = 0,
2409                 .tuner          = -1,
2410                 .svhs           = -1,
2411                 .gpiomask       = 0,
2412                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2413                 .no_msp34xx     = 1,
2414                 .no_tda9875     = 1,
2415                 .no_tda7432     = 1,
2416                 .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2417                 .audiomux       = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2418                 .pll            = PLL_28,
2419                 .needs_tvaudio  = 0,
2420                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2421                 .tuner_type     = -1,
2422                 .tuner_addr     = ADDR_UNSET,
2423                 .radio_addr     = ADDR_UNSET,
2424         },
2425         [BTTV_BOARD_SPIRIT_TV] = {
2426                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2427                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2428                 .name           = "Spirit TV Tuner",
2429                 .video_inputs   = 3,
2430                 .audio_inputs   = 1,
2431                 .tuner          = 0,
2432                 .svhs           = 2,
2433                 .gpiomask       = 0x0000000f,
2434                 .muxsel         = { 2, 1, 1 },
2435                 .audiomux       = { 0x02, 0x00, 0x00, 0x00, 0x00},
2436                 .tuner_type     = TUNER_TEMIC_PAL,
2437                 .tuner_addr     = ADDR_UNSET,
2438                 .radio_addr     = ADDR_UNSET,
2439                 .no_msp34xx     = 1,
2440                 .no_tda9875     = 1,
2441         },
2442         [BTTV_BOARD_AVDVBT_771] = {
2443                 /* Wolfram Joost <wojo@frokaschwei.de> */
2444                 .name           = "AVerMedia AVerTV DVB-T 771",
2445                 .video_inputs   = 2,
2446                 .svhs           = 1,
2447                 .tuner          = -1,
2448                 .tuner_type     = TUNER_ABSENT,
2449                 .tuner_addr     = ADDR_UNSET,
2450                 .radio_addr     = ADDR_UNSET,
2451                 .muxsel         = { 3 , 3 },
2452                 .no_msp34xx     = 1,
2453                 .no_tda9875     = 1,
2454                 .no_tda7432     = 1,
2455                 .pll            = PLL_28,
2456                 .has_dvb        = 1,
2457                 .no_gpioirq     = 1,
2458                 .has_remote     = 1,
2459         },
2460                 /* ---- card 0x7c ---------------------------------- */
2461         [BTTV_BOARD_AVDVBT_761] = {
2462                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2463                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2464                 .name           = "AverMedia AverTV DVB-T 761",
2465                 .video_inputs   = 2,
2466                 .tuner          = -1,
2467                 .svhs           = 1,
2468                 .muxsel         = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2469                 .no_msp34xx     = 1,
2470                 .no_tda9875     = 1,
2471                 .no_tda7432     = 1,
2472                 .pll            = PLL_28,
2473                 .tuner_type     = -1,
2474                 .tuner_addr     = ADDR_UNSET,
2475                 .radio_addr     = ADDR_UNSET,
2476                 .has_dvb        = 1,
2477                 .no_gpioirq     = 1,
2478                 .has_remote     = 1,
2479         },
2480         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2481                 /* andre.schwarz@matrix-vision.de */
2482                 .name             = "MATRIX Vision Sigma-SQ",
2483                 .video_inputs     = 16,
2484                 .audio_inputs     = 0,
2485                 .tuner            = -1,
2486                 .svhs             = -1,
2487                 .gpiomask         = 0x0,
2488                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2489                                 3, 3, 3, 3, 3, 3, 3, 3 },
2490                 .muxsel_hook      = sigmaSQ_muxsel,
2491                 .audiomux         = { 0 },
2492                 .no_msp34xx       = 1,
2493                 .pll              = PLL_28,
2494                 .tuner_type       = -1,
2495                 .tuner_addr       = ADDR_UNSET,
2496                 .radio_addr     = ADDR_UNSET,
2497         },
2498         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2499                 /* andre.schwarz@matrix-vision.de */
2500                 .name             = "MATRIX Vision Sigma-SLC",
2501                 .video_inputs     = 4,
2502                 .audio_inputs     = 0,
2503                 .tuner            = -1,
2504                 .svhs             = -1,
2505                 .gpiomask         = 0x0,
2506                 .muxsel           = { 2, 2, 2, 2 },
2507                 .muxsel_hook      = sigmaSLC_muxsel,
2508                 .audiomux         = { 0 },
2509                 .no_msp34xx       = 1,
2510                 .pll              = PLL_28,
2511                 .tuner_type       = -1,
2512                 .tuner_addr       = ADDR_UNSET,
2513                 .radio_addr     = ADDR_UNSET,
2514         },
2515                 /* BTTV_BOARD_APAC_VIEWCOMP */
2516         [BTTV_BOARD_APAC_VIEWCOMP] = {
2517                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2518                 /* bt878 TV + FM 0x00000000 subsystem ID */
2519                 .name           = "APAC Viewcomp 878(AMAX)",
2520                 .video_inputs   = 2,
2521                 .audio_inputs   = 1,
2522                 .tuner          = 0,
2523                 .svhs           = -1,
2524                 .gpiomask       = 0xFF,
2525                 .muxsel         = { 2, 3, 1, 1},
2526                 .audiomux       = { 2, 0, 0, 0, 10},
2527                 .needs_tvaudio  = 0,
2528                 .pll            = PLL_28,
2529                 .tuner_type     = TUNER_PHILIPS_PAL,
2530                 .tuner_addr     = ADDR_UNSET,
2531                 .radio_addr     = ADDR_UNSET,
2532                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2533                 .has_radio      = 1,   /* not every card has radio */
2534         },
2535
2536                 /* ---- card 0x80 ---------------------------------- */
2537         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2538                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2539                 .name           = "DViCO FusionHDTV DVB-T Lite",
2540                 .tuner          = -1,
2541                 .no_msp34xx     = 1,
2542                 .no_tda9875     = 1,
2543                 .no_tda7432     = 1,
2544                 .pll            = PLL_28,
2545                 .no_video       = 1,
2546                 .has_dvb        = 1,
2547                 .tuner_type     = -1,
2548                 .tuner_addr     = ADDR_UNSET,
2549                 .radio_addr     = ADDR_UNSET,
2550         },
2551         [BTTV_BOARD_VGEAR_MYVCD] = {
2552                 /* Steven <photon38@pchome.com.tw> */
2553                 .name           = "V-Gear MyVCD",
2554                 .video_inputs   = 3,
2555                 .audio_inputs   = 1,
2556                 .tuner          = 0,
2557                 .svhs           = 2,
2558                 .gpiomask       = 0x3f,
2559                 .muxsel         = {2, 3, 1, 0},
2560                 .audiomux       = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2561                 .no_msp34xx     = 1,
2562                 .pll            = PLL_28,
2563                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2564                 .tuner_addr     = ADDR_UNSET,
2565                 .radio_addr     = ADDR_UNSET,
2566                 .has_radio      = 0,
2567         #if 0
2568                 .has_remote     = 1,
2569         #endif
2570         },
2571         [BTTV_BOARD_SUPER_TV] = {
2572                 /* Rick C <cryptdragoon@gmail.com> */
2573                 .name           = "Super TV Tuner",
2574                 .video_inputs   = 4,
2575                 .audio_inputs   = 1,
2576                 .tuner          = 0,
2577                 .svhs           = 2,
2578                 .muxsel         = { 2, 3, 1, 0},
2579                 .tuner_type     = TUNER_PHILIPS_NTSC,
2580                 .tuner_addr     = ADDR_UNSET,
2581                 .radio_addr     = ADDR_UNSET,
2582                 .gpiomask       = 0x008007,
2583                 .audiomux       = { 0, 0x000001,0,0, 0},
2584                 .needs_tvaudio  = 1,
2585                 .has_radio      = 1,
2586         },
2587         [BTTV_BOARD_TIBET_CS16] = {
2588                 /* Chris Fanning <video4linux@haydon.net> */
2589                 .name           = "Tibet Systems 'Progress DVR' CS16",
2590                 .video_inputs   = 16,
2591                 .audio_inputs   = 0,
2592                 .tuner          = -1,
2593                 .svhs           = -1,
2594                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2595                 .pll            = PLL_28,
2596                 .no_msp34xx     = 1,
2597                 .no_tda9875     = 1,
2598                 .no_tda7432     = 1,
2599                 .tuner_type     = -1,
2600                 .tuner_addr     = ADDR_UNSET,
2601                 .radio_addr     = ADDR_UNSET,
2602                 .muxsel_hook    = tibetCS16_muxsel,
2603         },
2604         [BTTV_BOARD_KODICOM_4400R] = {
2605                 /* Bill Brack <wbrack@mmm.com.hk> */
2606                 /*
2607                 * Note that, because of the card's wiring, the "master"
2608                 * BT878A chip (i.e. the one which controls the analog switch
2609                 * and must use this card type) is the 2nd one detected.  The
2610                 * other 3 chips should use card type 0x85, whose description
2611                 * follows this one.  There is a EEPROM on the card (which is
2612                 * connected to the I2C of one of those other chips), but is
2613                 * not currently handled.  There is also a facility for a
2614                 * "monitor", which is also not currently implemented.
2615                 */
2616                 .name           = "Kodicom 4400R (master)",
2617                 .video_inputs   = 16,
2618                 .audio_inputs   = 0,
2619                 .tuner          = -1,
2620                 .tuner_type     = -1,
2621                 .tuner_addr     = ADDR_UNSET,
2622                 .radio_addr     = ADDR_UNSET,
2623                 .svhs           = -1,
2624                 /* GPIO bits 0-9 used for analog switch:
2625                 *   00 - 03:    camera selector
2626                 *   04 - 06:    channel (controller) selector
2627                 *   07: data (1->on, 0->off)
2628                 *   08: strobe
2629                 *   09: reset
2630                 * bit 16 is input from sync separator for the channel
2631                 */
2632                 .gpiomask       = 0x0003ff,
2633                 .no_gpioirq     = 1,
2634                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2635                 .pll            = PLL_28,
2636                 .no_msp34xx     = 1,
2637                 .no_tda7432     = 1,
2638                 .no_tda9875     = 1,
2639                 .muxsel_hook    = kodicom4400r_muxsel,
2640         },
2641         [BTTV_BOARD_KODICOM_4400R_SL] = {
2642                 /* Bill Brack <wbrack@mmm.com.hk> */
2643                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2644                 * one which controls the analog switch, and must use the card type)
2645                 * is the 2nd one detected.  The other 3 chips should use this card
2646                 * type
2647                 */
2648                 .name           = "Kodicom 4400R (slave)",
2649                 .video_inputs   = 16,
2650                 .audio_inputs   = 0,
2651                 .tuner          = -1,
2652                 .tuner_type     = -1,
2653                 .tuner_addr     = ADDR_UNSET,
2654                 .radio_addr     = ADDR_UNSET,
2655                 .svhs           = -1,
2656                 .gpiomask       = 0x010000,
2657                 .no_gpioirq     = 1,
2658                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2659                 .pll            = PLL_28,
2660                 .no_msp34xx     = 1,
2661                 .no_tda7432     = 1,
2662                 .no_tda9875     = 1,
2663                 .muxsel_hook    = kodicom4400r_muxsel,
2664         },
2665                 /* ---- card 0x86---------------------------------- */
2666         [BTTV_BOARD_ADLINK_RTV24] = {
2667                 /* Michael Henson <mhenson@clarityvi.com> */
2668                 /* Adlink RTV24 with special unlock codes */
2669                 .name           = "Adlink RTV24",
2670                 .video_inputs   = 4,
2671                 .audio_inputs   = 1,
2672                 .tuner          = 0,
2673                 .svhs           = 2,
2674                 .muxsel         = { 2, 3, 1, 0},
2675                 .tuner_type     = -1,
2676                 .tuner_addr     = ADDR_UNSET,
2677                 .radio_addr     = ADDR_UNSET,
2678                 .pll            = PLL_28,
2679         },
2680                 /* ---- card 0x87---------------------------------- */
2681         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2682                 /* Michael Krufky <mkrufky@m1k.net> */
2683                 .name           = "DViCO FusionHDTV 5 Lite",
2684                 .tuner          = 0,
2685                 .tuner_type     = TUNER_LG_TDVS_H062F,
2686                 .tuner_addr     = ADDR_UNSET,
2687                 .radio_addr     = ADDR_UNSET,
2688                 .video_inputs   = 3,
2689                 .audio_inputs   = 1,
2690                 .svhs           = 2,
2691                 .muxsel         = { 2, 3, 1 },
2692                 .gpiomask       = 0x00e00007,
2693                 .audiomux       = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
2694                 .no_msp34xx     = 1,
2695                 .no_tda9875     = 1,
2696                 .no_tda7432     = 1,
2697                 .has_dvb        = 1,
2698         },
2699                 /* ---- card 0x88---------------------------------- */
2700         [BTTV_BOARD_ACORP_Y878F] = {
2701                 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2702                 .name           = "Acorp Y878F",
2703                 .video_inputs   = 3,
2704                 .audio_inputs   = 1,
2705                 .tuner          = 0,
2706                 .svhs           = 2,
2707                 .gpiomask       = 0x01fe00,
2708                 .muxsel         = { 2, 3, 1, 1},
2709                 .audiomux       = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
2710                 .needs_tvaudio  = 1,
2711                 .pll            = PLL_28,
2712                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2713                 .tuner_addr     = 0xc1 >>1,
2714                 .radio_addr     = 0xc1 >>1,
2715                 .has_radio      = 1,
2716         },
2717                 /* ---- card 0x89 ---------------------------------- */
2718         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2719                 .name           = "Conceptronic CTVFMi v2",
2720                 .video_inputs   = 3,
2721                 .audio_inputs   = 1,
2722                 .tuner          = 0,
2723                 .svhs           = 2,
2724                 .gpiomask       = 0x001c0007,
2725                 .muxsel         = { 2, 3, 1, 1 },
2726                 .audiomux       = { 0, 1, 2, 2, 3 },
2727                 .needs_tvaudio  = 0,
2728                 .pll            = PLL_28,
2729                 .tuner_type     = TUNER_TENA_9533_DI,
2730                 .tuner_addr     = ADDR_UNSET,
2731                 .radio_addr     = ADDR_UNSET,
2732                 .has_remote     = 1,
2733                 .has_radio      = 1,
2734         },
2735                 /* ---- card 0x8a ---------------------------------- */
2736         [BTTV_BOARD_PV_BT878P_2E] = {
2737                 .name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2738                 .video_inputs  = 5,
2739                 .audio_inputs  = 1,
2740                 .tuner         = 0,
2741                 .svhs          = 3,
2742                 .gpiomask      = 0x01fe00,
2743                 .muxsel        = { 2,3,1,1,-1 },
2744                 .digital_mode  = DIGITAL_MODE_CAMERA,
2745                 .audiomux      = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000  },
2746                 .no_msp34xx    = 1,
2747                 .pll           = PLL_28,
2748                 .tuner_type    = TUNER_LG_PAL_FM,
2749                 .tuner_addr     = ADDR_UNSET,
2750                 .radio_addr     = ADDR_UNSET,
2751                 .has_remote    = 1,
2752         },
2753                 /* ---- card 0x8b ---------------------------------- */
2754         [BTTV_BOARD_PV_M4900] = {
2755                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2756                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2757                 .video_inputs   = 3,
2758                 .audio_inputs   = 1,
2759                 .tuner          = 0,
2760                 .svhs           = 2,
2761                 .gpiomask       = 0x3f,
2762                 .muxsel         = { 2, 3, 1, 1 },
2763                 .audiomux       = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
2764                 .no_msp34xx     = 1,
2765                 .pll            = PLL_28,
2766                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2767                 .tuner_addr     = ADDR_UNSET,
2768                 .radio_addr     = ADDR_UNSET,
2769                 .has_radio      = 1,
2770                 .has_remote     = 1,
2771         },
2772                 /* ---- card 0x8c ---------------------------------- */
2773         [BTTV_BOARD_OSPREY440]  = {
2774                 .name           = "Osprey 440",
2775                 .video_inputs   = 1,
2776                 .audio_inputs   = 1,
2777                 .tuner          = -1,
2778                 .svhs           = 1,
2779                 .muxsel         = { 2 },
2780                 .pll            = PLL_28,
2781                 .tuner_type     = UNSET,
2782                 .tuner_addr     = ADDR_UNSET,
2783                 .radio_addr     = ADDR_UNSET,
2784                 .no_msp34xx     = 1,
2785                 .no_tda9875     = 1,
2786                 .no_tda7432     = 1,
2787         },
2788                 /* ---- card 0x8d ---------------------------------- */
2789         [BTTV_BOARD_ASOUND_SKYEYE] = {
2790                 .name           = "Asound Skyeye PCTV",
2791                 .video_inputs   = 3,
2792                 .audio_inputs   = 1,
2793                 .tuner          = 0,
2794                 .svhs           = 2,
2795                 .gpiomask       = 15,
2796                 .muxsel         = { 2, 3, 1, 1},
2797                 .audiomux       = {2,0,0,0,1},
2798                 .needs_tvaudio  = 1,
2799                 .pll            = PLL_28,
2800                 .tuner_type     = 2,
2801                 .tuner_addr     = ADDR_UNSET,
2802                 .radio_addr     = ADDR_UNSET,
2803         },
2804                 /* ---- card 0x8e ---------------------------------- */
2805         [BTTV_BOARD_SABRENT_TVFM] = {
2806                 .name           = "Sabrent TV-FM (bttv version)",
2807                 .video_inputs   = 3,
2808                 .audio_inputs   = 1,
2809                 .tuner          = 0,
2810                 .svhs           = 2,
2811                 .gpiomask       = 0x108007,
2812                 .muxsel         = { 2, 3, 1, 1},
2813                 .audiomux       = { 100000, 100002, 100002, 100000},
2814                 .no_msp34xx     = 1,
2815                 .no_tda9875     = 1,
2816                 .no_tda7432     = 1,
2817                 .pll            = PLL_28,
2818                 .tuner_type     = TUNER_TNF_5335MF,
2819                 .tuner_addr     = ADDR_UNSET,
2820                 .has_radio      = 1,
2821         },
2822         /* ---- card 0x8f ---------------------------------- */
2823         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2824                 .name           = "Hauppauge ImpactVCB (bt878)",
2825                 .video_inputs   = 4,
2826                 .audio_inputs   = 0,
2827                 .tuner          = -1,
2828                 .svhs           = -1,
2829                 .gpiomask       = 0x0f, /* old: 7 */
2830                 .muxsel         = { 0, 1, 3, 2}, /* Composite 0-3 */
2831                 .no_msp34xx     = 1,
2832                 .no_tda9875     = 1,
2833                 .no_tda7432     = 1,
2834                 .tuner_type     = -1,
2835                 .tuner_addr     = ADDR_UNSET,
2836                 .radio_addr     = ADDR_UNSET,
2837         },
2838 };
2839
2840 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2841
2842 /* ----------------------------------------------------------------------- */
2843
2844 static unsigned char eeprom_data[256];
2845
2846 /*
2847  * identify card
2848  */
2849 void __devinit bttv_idcard(struct bttv *btv)
2850 {
2851         unsigned int gpiobits;
2852         int i,type;
2853         unsigned short tmp;
2854
2855         /* read PCI subsystem ID */
2856         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2857         btv->cardid = tmp << 16;
2858         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2859         btv->cardid |= tmp;
2860
2861         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2862                 /* look for the card */
2863                 for (type = -1, i = 0; cards[i].id != 0; i++)
2864                         if (cards[i].id  == btv->cardid)
2865                                 type = i;
2866
2867                 if (type != -1) {
2868                         /* found it */
2869                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2870                                "PCI subsystem ID is %04x:%04x\n",
2871                                btv->c.nr,cards[type].name,cards[type].cardnr,
2872                                btv->cardid & 0xffff,
2873                                (btv->cardid >> 16) & 0xffff);
2874                         btv->c.type = cards[type].cardnr;
2875                 } else {
2876                         /* 404 */
2877                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2878                                btv->c.nr, btv->cardid & 0xffff,
2879                                (btv->cardid >> 16) & 0xffff);
2880                         printk(KERN_DEBUG "please mail id, board name and "
2881                                "the correct card= insmod option to video4linux-list@redhat.com\n");
2882                 }
2883         }
2884
2885         /* let the user override the autodetected type */
2886         if (card[btv->c.nr] < bttv_num_tvcards)
2887                 btv->c.type=card[btv->c.nr];
2888
2889         /* print which card config we are using */
2890         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2891                bttv_tvcards[btv->c.type].name, btv->c.type,
2892                card[btv->c.nr] < bttv_num_tvcards
2893                ? "insmod option" : "autodetected");
2894
2895         /* overwrite gpio stuff ?? */
2896         if (UNSET == audioall && UNSET == audiomux[0])
2897                 return;
2898
2899         if (UNSET != audiomux[0]) {
2900                 gpiobits = 0;
2901                 for (i = 0; i < 5; i++) {
2902                         bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2903                         gpiobits |= audiomux[i];
2904                 }
2905         } else {
2906                 gpiobits = audioall;
2907                 for (i = 0; i < 5; i++) {
2908                         bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2909                 }
2910         }
2911         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2912         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2913                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2914         for (i = 0; i < 5; i++) {
2915                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2916         }
2917         printk("\n");
2918 }
2919
2920 /*
2921  * (most) board specific initialisations goes here
2922  */
2923
2924 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2925 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2926 {
2927         int type = -1;
2928
2929         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2930                 type = BTTV_BOARD_MODTEC_205;
2931         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2932                 type = BTTV_BOARD_EURESYS_PICOLO;
2933         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2934                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2935
2936         if (-1 != type) {
2937                 btv->c.type = type;
2938                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2939                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2940         }
2941 }
2942
2943 static void flyvideo_gpio(struct bttv *btv)
2944 {
2945         int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2946         int tuner=-1,ttype;
2947
2948         gpio_inout(0xffffff, 0);
2949         udelay(8);  /* without this we would see the 0x1800 mask */
2950         gpio = gpio_read();
2951         /* FIXME: must restore OUR_EN ??? */
2952
2953         /* all cards provide GPIO info, some have an additional eeprom
2954          * LR50: GPIO coding can be found lower right CP1 .. CP9
2955          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2956          *       GPIO14-12: n.c.
2957          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2958
2959          * lowest 3 bytes are remote control codes (no handshake needed)
2960          * xxxFFF: No remote control chip soldered
2961          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2962          * Note: Some bits are Audio_Mask !
2963          */
2964         ttype=(gpio&0x0f0000)>>16;
2965         switch(ttype) {
2966         case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
2967                 break;
2968         case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
2969                 break;
2970         case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2971                 break;
2972         case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
2973                 break;
2974                 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2975                 break;
2976         default:
2977                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2978         }
2979
2980         has_remote          =   gpio & 0x800000;
2981         has_radio           =   gpio & 0x400000;
2982         /*   unknown                   0x200000;
2983          *   unknown2                  0x100000; */
2984         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
2985         has_tda9820_tda9821 = !(gpio & 0x004000);
2986         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2987         /*
2988          * gpio & 0x001000    output bit for audio routing */
2989
2990         if(is_capture_only)
2991                 tuner=4; /* No tuner present */
2992
2993         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2994                btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
2995         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2996                 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
2997                 is_capture_only?"yes":"no ");
2998
2999         if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3000                 btv->tuner_type = tuner;
3001         btv->has_radio = has_radio;
3002
3003         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3004          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3005          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3006         if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3007         /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3008 }
3009
3010 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3011                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3012 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3013                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3014
3015 static void miro_pinnacle_gpio(struct bttv *btv)
3016 {
3017         int id,msp,gpio;
3018         char *info;
3019
3020         gpio_inout(0xffffff, 0);
3021         gpio = gpio_read();
3022         id   = ((gpio>>10) & 63) -1;
3023         msp  = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
3024         if (id < 32) {
3025                 btv->tuner_type = miro_tunermap[id];
3026                 if (0 == (gpio & 0x20)) {
3027                         btv->has_radio = 1;
3028                         if (!miro_fmtuner[id]) {
3029                                 btv->has_matchbox = 1;
3030                                 btv->mbox_we    = (1<<6);
3031                                 btv->mbox_most  = (1<<7);
3032                                 btv->mbox_clk   = (1<<8);
3033                                 btv->mbox_data  = (1<<9);
3034                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3035                         }
3036                 } else {
3037                         btv->has_radio = 0;
3038                 }
3039                 if (-1 != msp) {
3040                         if (btv->c.type == BTTV_BOARD_MIRO)
3041                                 btv->c.type = BTTV_BOARD_MIROPRO;
3042                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3043                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3044                 }
3045                 printk(KERN_INFO
3046                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3047                        btv->c.nr, id+1, btv->tuner_type,
3048                        !btv->has_radio ? "no" :
3049                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3050                        (-1 == msp) ? "no" : "yes");
3051         } else {
3052                 /* new cards with microtune tuner */
3053                 id = 63 - id;
3054                 btv->has_radio = 0;
3055                 switch (id) {
3056                 case 1:
3057                         info = "PAL / mono";
3058                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3059                         break;
3060                 case 2:
3061                         info = "PAL+SECAM / stereo";
3062                         btv->has_radio = 1;
3063                         btv->tda9887_conf = TDA9887_QSS;
3064                         break;
3065                 case 3:
3066                         info = "NTSC / stereo";
3067                         btv->has_radio = 1;
3068                         btv->tda9887_conf = TDA9887_QSS;
3069                         break;
3070                 case 4:
3071                         info = "PAL+SECAM / mono";
3072                         btv->tda9887_conf = TDA9887_QSS;
3073                         break;
3074                 case 5:
3075                         info = "NTSC / mono";
3076                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3077                         break;
3078                 case 6:
3079                         info = "NTSC / stereo";
3080                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3081                         break;
3082                 case 7:
3083                         info = "PAL / stereo";
3084                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3085                         break;
3086                 default:
3087                         info = "oops: unknown card";
3088                         break;
3089                 }
3090                 if (-1 != msp)
3091                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3092                 printk(KERN_INFO
3093                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3094                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3095                 btv->tuner_type = TUNER_MT2032;
3096         }
3097 }
3098
3099 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3100 #define LM1882_SYNC_DRIVE     0x200000L
3101
3102 static void init_ids_eagle(struct bttv *btv)
3103 {
3104         gpio_inout(0xffffff,0xFFFF37);
3105         gpio_write(0x200020);
3106
3107         /* flash strobe inverter ?! */
3108         gpio_write(0x200024);
3109
3110         /* switch sync drive off */
3111         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3112
3113         /* set BT848 muxel to 2 */
3114         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3115 }
3116
3117 /* Muxsel helper for the IDS Eagle.
3118  * the eagles does not use the standard muxsel-bits but
3119  * has its own multiplexer */
3120 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3121 {
3122         btaor((2)<<5, ~(3<<5), BT848_IFORM);
3123         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3124
3125        /* composite */
3126        /* set chroma ADC to sleep */
3127        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3128        /* set to composite video */
3129        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3130        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3131
3132        /* switch sync drive off */
3133        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3134 }
3135
3136 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3137 {
3138         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3139         gpio_write(masks[input%4]);
3140 }
3141
3142 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3143    alarms output
3144
3145    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3146    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3147
3148    IN - sensor inputs, INx - sensor inputs and TI XORed together
3149    O1,O2,O3 - alarm outputs (relays)
3150
3151    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3152
3153 */
3154
3155 static void init_lmlbt4x(struct bttv *btv)
3156 {
3157         printk(KERN_DEBUG "LMLBT4x init\n");
3158         btwrite(0x000000, BT848_GPIO_REG_INP);
3159         gpio_inout(0xffffff, 0x0006C0);
3160         gpio_write(0x000000);
3161 }
3162
3163 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3164 {
3165         unsigned int inmux = input % 8;
3166         gpio_inout( 0xf, 0xf );
3167         gpio_bits( 0xf, inmux );
3168 }
3169
3170 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3171 {
3172         unsigned int inmux = input % 4;
3173         gpio_inout( 3<<9, 3<<9 );
3174         gpio_bits( 3<<9, inmux<<9 );
3175 }
3176
3177 /* ----------------------------------------------------------------------- */
3178
3179 static void bttv_reset_audio(struct bttv *btv)
3180 {
3181         /*
3182          * BT878A has a audio-reset register.
3183          * 1. This register is an audio reset function but it is in
3184          *    function-0 (video capture) address space.
3185          * 2. It is enough to do this once per power-up of the card.
3186          * 3. There is a typo in the Conexant doc -- it is not at
3187          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3188          * --//Shrikumar 030609
3189          */
3190         if (btv->id != 878)
3191                 return;
3192
3193         if (bttv_debug)
3194                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3195         btwrite((1<<7), 0x058);
3196         udelay(10);
3197         btwrite(     0, 0x058);
3198 }
3199
3200 /* initialization part one -- before registering i2c bus */
3201 void __devinit bttv_init_card1(struct bttv *btv)
3202 {
3203         switch (btv->c.type) {
3204         case BTTV_BOARD_HAUPPAUGE:
3205         case BTTV_BOARD_HAUPPAUGE878:
3206                 boot_msp34xx(btv,5);
3207                 break;
3208         case BTTV_BOARD_VOODOOTV_FM:
3209                 boot_msp34xx(btv,20);
3210                 break;
3211         case BTTV_BOARD_AVERMEDIA98:
3212                 boot_msp34xx(btv,11);
3213                 break;
3214         case BTTV_BOARD_HAUPPAUGEPVR:
3215                 pvr_boot(btv);
3216                 break;
3217         case BTTV_BOARD_TWINHAN_DST:
3218         case BTTV_BOARD_AVDVBT_771:
3219         case BTTV_BOARD_PINNACLESAT:
3220                 btv->use_i2c_hw = 1;
3221                 break;
3222         case BTTV_BOARD_ADLINK_RTV24:
3223                 init_RTV24( btv );
3224                 break;
3225
3226         }
3227         if (!bttv_tvcards[btv->c.type].has_dvb)
3228                 bttv_reset_audio(btv);
3229 }
3230
3231 /* initialization part two -- after registering i2c bus */
3232 void __devinit bttv_init_card2(struct bttv *btv)
3233 {
3234         int tda9887;
3235         int addr=ADDR_UNSET;
3236
3237         btv->tuner_type = -1;
3238
3239         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3240                 bttv_readee(btv,eeprom_data,0xa0);
3241                 identify_by_eeprom(btv,eeprom_data);
3242         }
3243
3244         switch (btv->c.type) {
3245         case BTTV_BOARD_MIRO:
3246         case BTTV_BOARD_MIROPRO:
3247         case BTTV_BOARD_PINNACLE:
3248         case BTTV_BOARD_PINNACLEPRO:
3249                 /* miro/pinnacle */
3250                 miro_pinnacle_gpio(btv);
3251                 break;
3252         case BTTV_BOARD_FLYVIDEO_98:
3253         case BTTV_BOARD_MAXI:
3254         case BTTV_BOARD_LIFE_FLYKIT:
3255         case BTTV_BOARD_FLYVIDEO:
3256         case BTTV_BOARD_TYPHOON_TVIEW:
3257         case BTTV_BOARD_CHRONOS_VS2:
3258         case BTTV_BOARD_FLYVIDEO_98FM:
3259         case BTTV_BOARD_FLYVIDEO2000:
3260         case BTTV_BOARD_FLYVIDEO98EZ:
3261         case BTTV_BOARD_CONFERENCETV:
3262         case BTTV_BOARD_LIFETEC_9415:
3263                 flyvideo_gpio(btv);
3264                 break;
3265         case BTTV_BOARD_HAUPPAUGE:
3266         case BTTV_BOARD_HAUPPAUGE878:
3267         case BTTV_BOARD_HAUPPAUGEPVR:
3268                 /* pick up some config infos from the eeprom */
3269                 bttv_readee(btv,eeprom_data,0xa0);
3270                 hauppauge_eeprom(btv);
3271                 break;
3272         case BTTV_BOARD_AVERMEDIA98:
3273         case BTTV_BOARD_AVPHONE98:
3274                 bttv_readee(btv,eeprom_data,0xa0);
3275                 avermedia_eeprom(btv);
3276                 break;
3277         case BTTV_BOARD_PXC200:
3278                 init_PXC200(btv);
3279                 break;
3280         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3281                 picolo_tetra_init(btv);
3282                 break;
3283         case BTTV_BOARD_VHX:
3284                 btv->has_radio    = 1;
3285                 btv->has_matchbox = 1;
3286                 btv->mbox_we      = 0x20;
3287                 btv->mbox_most    = 0;
3288                 btv->mbox_clk     = 0x08;
3289                 btv->mbox_data    = 0x10;
3290                 btv->mbox_mask    = 0x38;
3291                 break;
3292         case BTTV_BOARD_VOBIS_BOOSTAR:
3293         case BTTV_BOARD_TERRATV:
3294                 terratec_active_radio_upgrade(btv);
3295                 break;
3296         case BTTV_BOARD_MAGICTVIEW061:
3297                 if (btv->cardid == 0x3002144f) {
3298                         btv->has_radio=1;
3299                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3300                 }
3301                 break;
3302        case BTTV_BOARD_STB2:
3303                 if (btv->cardid == 0x3060121a) {
3304                         /* Fix up entry for 3DFX VoodooTV 100,
3305                            which is an OEM STB card variant. */
3306                         btv->has_radio=0;
3307                         btv->tuner_type=TUNER_TEMIC_NTSC;
3308                 }
3309                 break;
3310         case BTTV_BOARD_OSPREY1x0:
3311         case BTTV_BOARD_OSPREY1x0_848:
3312         case BTTV_BOARD_OSPREY101_848:
3313         case BTTV_BOARD_OSPREY1x1:
3314         case BTTV_BOARD_OSPREY1x1_SVID:
3315         case BTTV_BOARD_OSPREY2xx:
3316         case BTTV_BOARD_OSPREY2x0_SVID:
3317         case BTTV_BOARD_OSPREY2x0:
3318         case BTTV_BOARD_OSPREY500:
3319         case BTTV_BOARD_OSPREY540:
3320         case BTTV_BOARD_OSPREY2000:
3321                 bttv_readee(btv,eeprom_data,0xa0);
3322                 osprey_eeprom(btv);
3323                 break;
3324         case BTTV_BOARD_IDS_EAGLE:
3325                 init_ids_eagle(btv);
3326                 break;
3327         case BTTV_BOARD_MODTEC_205:
3328                 bttv_readee(btv,eeprom_data,0xa0);
3329                 modtec_eeprom(btv);
3330                 break;
3331         case BTTV_BOARD_LMLBT4:
3332                 init_lmlbt4x(btv);
3333                 break;
3334         case BTTV_BOARD_TIBET_CS16:
3335                 tibetCS16_init(btv);
3336                 break;
3337         case BTTV_BOARD_KODICOM_4400R:
3338                 kodicom4400r_init(btv);
3339                 break;
3340         }
3341
3342         /* pll configuration */
3343         if (!(btv->id==848 && btv->revision==0x11)) {
3344                 /* defaults from card list */
3345                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3346                         btv->pll.pll_ifreq=28636363;
3347                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3348                 }
3349                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3350                         btv->pll.pll_ifreq=35468950;
3351                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3352                 }
3353                 /* insmod options can override */
3354                 switch (pll[btv->c.nr]) {
3355                 case 0: /* none */
3356                         btv->pll.pll_crystal = 0;
3357                         btv->pll.pll_ifreq   = 0;
3358                         btv->pll.pll_ofreq   = 0;
3359                         break;
3360                 case 1: /* 28 MHz */
3361                 case 28:
3362                         btv->pll.pll_ifreq   = 28636363;
3363                         btv->pll.pll_ofreq   = 0;
3364                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3365                         break;
3366                 case 2: /* 35 MHz */
3367                 case 35:
3368                         btv->pll.pll_ifreq   = 35468950;
3369                         btv->pll.pll_ofreq   = 0;
3370                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3371                         break;
3372                 }
3373         }
3374         btv->pll.pll_current = -1;
3375
3376         /* tuner configuration (from card list / autodetect / insmod option) */
3377         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3378                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3379
3380         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3381                 if(UNSET == btv->tuner_type)
3382                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3383         if (UNSET != tuner[btv->c.nr])
3384                 btv->tuner_type = tuner[btv->c.nr];
3385         printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3386
3387         if (btv->tuner_type != UNSET) {
3388                 struct tuner_setup tun_setup;
3389
3390                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3391                 tun_setup.type = btv->tuner_type;
3392                 tun_setup.addr = addr;
3393
3394                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3395         }
3396
3397         if (btv->tda9887_conf) {
3398                 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3399                                                         &btv->tda9887_conf);
3400         }
3401
3402         btv->svhs = bttv_tvcards[btv->c.type].svhs;
3403         if (svhs[btv->c.nr] != UNSET)
3404                 btv->svhs = svhs[btv->c.nr];
3405         if (remote[btv->c.nr] != UNSET)
3406                 btv->has_remote = remote[btv->c.nr];
3407
3408         if (bttv_tvcards[btv->c.type].has_radio)
3409                 btv->has_radio=1;
3410         if (bttv_tvcards[btv->c.type].has_remote)
3411                 btv->has_remote=1;
3412         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3413                 btv->gpioirq=1;
3414         if (bttv_tvcards[btv->c.type].audio_hook)
3415                 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3416
3417         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3418                 /* detect Bt832 chip for quartzsight digital camera */
3419                 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
3420                     (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
3421                         boot_bt832(btv);
3422         }
3423
3424         if (!autoload)
3425                 return;
3426
3427         /* try to detect audio/fader chips */
3428         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3429             bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
3430                 request_module("msp3400");
3431
3432         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3433             bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3434                 request_module("msp3400");
3435
3436         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3437             bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
3438                 request_module("tda9875");
3439
3440         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3441             bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
3442                 request_module("tda7432");
3443
3444         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3445                 request_module("tvaudio");
3446
3447         /* tuner modules */
3448         tda9887 = 0;
3449         if (btv->tda9887_conf)
3450                 tda9887 = 1;
3451         if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3452             bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
3453                 tda9887 = 1;
3454         /* Hybrid DVB card, DOES have a tda9887 */
3455         if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3456                 tda9887 = 1;
3457         if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
3458            (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
3459            (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
3460             tda9887)
3461                 request_module("tda9887");
3462         if (btv->tuner_type != UNSET)
3463                 request_module("tuner");
3464 }
3465
3466
3467 /* ----------------------------------------------------------------------- */
3468
3469 static void modtec_eeprom(struct bttv *btv)
3470 {
3471         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3472                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3473                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3474                        btv->c.nr,&eeprom_data[0x1e]);
3475         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3476                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3477                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3478                        btv->c.nr,&eeprom_data[0x1e]);
3479         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3480                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3481                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3482                        btv->c.nr,&eeprom_data[0x1e]);
3483         } else {
3484                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3485                        btv->c.nr,&eeprom_data[0x1e]);
3486         }
3487 }
3488
3489 static void __devinit hauppauge_eeprom(struct bttv *btv)
3490 {
3491         struct tveeprom tv;
3492
3493         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3494         btv->tuner_type = tv.tuner_type;
3495         btv->has_radio  = tv.has_radio;
3496
3497         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3498                 btv->c.nr, tv.model);
3499
3500         /*
3501          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3502          * type based on model #.
3503          */
3504         if(tv.model == 64900) {
3505                 printk("bttv%d: Switching board type from %s to %s\n",
3506                         btv->c.nr,
3507                         bttv_tvcards[btv->c.type].name,
3508                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3509                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3510         }
3511 }
3512
3513 static int terratec_active_radio_upgrade(struct bttv *btv)
3514 {
3515         int freq;
3516
3517         btv->has_radio    = 1;
3518         btv->has_matchbox = 1;
3519         btv->mbox_we      = 0x10;
3520         btv->mbox_most    = 0x20;
3521         btv->mbox_clk     = 0x08;
3522         btv->mbox_data    = 0x04;
3523         btv->mbox_mask    = 0x3c;
3524
3525         btv->mbox_iow     = 1 <<  8;
3526         btv->mbox_ior     = 1 <<  9;
3527         btv->mbox_csel    = 1 << 10;
3528
3529         freq=88000/62.5;
3530         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3531         if (0x1ed8 == tea5757_read(btv)) {
3532                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3533                        btv->c.nr);
3534                 btv->has_radio    = 1;
3535                 btv->has_matchbox = 1;
3536         } else {
3537                 btv->has_radio    = 0;
3538                 btv->has_matchbox = 0;
3539         }
3540         return 0;
3541 }
3542
3543
3544 /* ----------------------------------------------------------------------- */
3545
3546 /*
3547  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3548  *
3549  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3550  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3551  * unpacked with unzip).
3552  */
3553 #define PVR_GPIO_DELAY          10
3554
3555 #define BTTV_ALT_DATA           0x000001
3556 #define BTTV_ALT_DCLK           0x100000
3557 #define BTTV_ALT_NCONFIG        0x800000
3558
3559 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3560 {
3561         u32 n;
3562         u8 bits;
3563         int i;
3564
3565         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3566         gpio_write(0);
3567         udelay(PVR_GPIO_DELAY);
3568
3569         gpio_write(BTTV_ALT_NCONFIG);
3570         udelay(PVR_GPIO_DELAY);
3571
3572         for (n = 0; n < microlen; n++) {
3573                 bits = micro[n];
3574                 for ( i = 0 ; i < 8 ; i++ ) {
3575                         gpio_bits(BTTV_ALT_DCLK,0);
3576                         if (bits & 0x01)
3577                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3578                         else
3579                                 gpio_bits(BTTV_ALT_DATA,0);
3580                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3581                         bits >>= 1;
3582                 }
3583         }
3584         gpio_bits(BTTV_ALT_DCLK,0);
3585         udelay(PVR_GPIO_DELAY);
3586
3587         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3588         for (i = 0 ; i < 30 ; i++) {
3589                 gpio_bits(BTTV_ALT_DCLK,0);
3590                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3591         }
3592         gpio_bits(BTTV_ALT_DCLK,0);
3593         return 0;
3594 }
3595
3596 static int __devinit pvr_boot(struct bttv *btv)
3597 {
3598         const struct firmware *fw_entry;
3599         int rc;
3600
3601         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3602         if (rc != 0) {
3603                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3604                        btv->c.nr);
3605                 return rc;
3606         }
3607         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3608         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3609                btv->c.nr, (rc < 0) ? "failed" : "ok");
3610         release_firmware(fw_entry);
3611         return rc;
3612 }
3613
3614 /* ----------------------------------------------------------------------- */
3615 /* some osprey specific stuff                                              */
3616
3617 static void __devinit osprey_eeprom(struct bttv *btv)
3618 {
3619        int i = 0;
3620        unsigned char *ee = eeprom_data;
3621        unsigned long serial = 0;
3622
3623        if (btv->c.type == 0) {
3624                /* this might be an antique... check for MMAC label in eeprom */
3625                if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3626                        unsigned char checksum = 0;
3627                        for (i =0; i<21; i++)
3628                                checksum += ee[i];
3629                        if (checksum != ee[21])
3630                                return;
3631                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3632                        for (i = 12; i < 21; i++)
3633                                serial *= 10, serial += ee[i] - '0';
3634                }
3635        } else {
3636                unsigned short type;
3637                int offset = 4*16;
3638
3639                for(; offset < 8*16; offset += 16) {
3640                        unsigned short checksum = 0;
3641                        /* verify the checksum */
3642                        for(i = 0; i<14; i++) checksum += ee[i+offset];
3643                                checksum = ~checksum;  /* no idea why */
3644                                if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3645                                    ((checksum & 0x0FF) == ee[offset+15])) {
3646                                break;
3647                        }
3648                }
3649
3650                if (offset >= 8*16)
3651                        return;
3652
3653                /* found a valid descriptor */
3654                type = (ee[offset+4]<<8) | (ee[offset+5]);
3655
3656                switch(type) {
3657
3658                /* 848 based */
3659                case 0x0004:
3660                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3661                        break;
3662                case 0x0005:
3663                        btv->c.type = BTTV_BOARD_OSPREY101_848;
3664                        break;
3665
3666                /* 878 based */
3667                case 0x0012:
3668                case 0x0013:
3669                        btv->c.type = BTTV_BOARD_OSPREY1x0;
3670                        break;
3671                case 0x0014:
3672                case 0x0015:
3673                        btv->c.type = BTTV_BOARD_OSPREY1x1;
3674                        break;
3675                case 0x0016:
3676                case 0x0017:
3677                case 0x0020:
3678                        btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3679                        break;
3680                case 0x0018:
3681                case 0x0019:
3682                case 0x001E:
3683                case 0x001F:
3684                        btv->c.type = BTTV_BOARD_OSPREY2xx;
3685                        break;
3686                case 0x001A:
3687                case 0x001B:
3688                        btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3689                        break;
3690                case 0x0040:
3691                        btv->c.type = BTTV_BOARD_OSPREY500;
3692                        break;
3693                case 0x0050:
3694                case 0x0056:
3695                        btv->c.type = BTTV_BOARD_OSPREY540;
3696                        /* bttv_osprey_540_init(btv); */
3697                        break;
3698                case 0x0060:
3699                case 0x0070:
3700                        btv->c.type = BTTV_BOARD_OSPREY2x0;
3701                        /* enable output on select control lines */
3702                        gpio_inout(0xffffff,0x000303);
3703                        break;
3704                default:
3705                        /* unknown...leave generic, but get serial # */
3706                        break;
3707                }
3708                serial =  (ee[offset+6] << 24)
3709                        | (ee[offset+7] << 16)
3710                        | (ee[offset+8] <<  8)
3711                        | (ee[offset+9]);
3712        }
3713
3714        printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3715               btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3716 }
3717
3718 /* ----------------------------------------------------------------------- */
3719 /* AVermedia specific stuff, from  bktr_card.c                             */
3720
3721 static int tuner_0_table[] = {
3722         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3723         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3724         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3725         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3726         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3727         TUNER_PHILIPS_FM1216ME_MK3 };
3728
3729 static int tuner_1_table[] = {
3730         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3731         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3732         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3733         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3734         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3735
3736 static void __devinit avermedia_eeprom(struct bttv *btv)
3737 {
3738         int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3739
3740         tuner_make      = (eeprom_data[0x41] & 0x7);
3741         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3742         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3743         btv->has_remote = (eeprom_data[0x42] & 0x01);
3744
3745         if (tuner_make == 0 || tuner_make == 2)
3746                 if(tuner_format <=0x0a)
3747                         tuner = tuner_0_table[tuner_format];
3748         if (tuner_make == 1)
3749                 if(tuner_format <=9)
3750                         tuner = tuner_1_table[tuner_format];
3751
3752         if (tuner_make == 4)
3753                 if(tuner_format == 0x09)
3754                         tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3755
3756         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3757                 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3758         if(tuner) {
3759                 btv->tuner_type=tuner;
3760                 printk("%d",tuner);
3761         } else
3762                 printk("Unknown type");
3763         printk(" radio:%s remote control:%s\n",
3764                tuner_tv_fm     ? "yes" : "no",
3765                btv->has_remote ? "yes" : "no");
3766 }
3767
3768 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3769 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3770 {
3771         /* fix up our card entry */
3772         if(norm==VIDEO_MODE_NTSC) {
3773                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff;
3774                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff;
3775                 dprintk("bttv_tda9880_setnorm to NTSC\n");
3776         }
3777         else {
3778                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff;
3779                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff;
3780                 dprintk("bttv_tda9880_setnorm to PAL\n");
3781         }
3782         /* set GPIO according */
3783         gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3784                   bttv_tvcards[btv->c.type].audiomux[btv->audio]);
3785 }
3786
3787
3788 /*
3789  * reset/enable the MSP on some Hauppauge cards
3790  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3791  *
3792  * Hauppauge:  pin  5
3793  * Voodoo:     pin 20
3794  */
3795 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3796 {
3797         int mask = (1 << pin);
3798
3799         gpio_inout(mask,mask);
3800         gpio_bits(mask,0);
3801         udelay(2500);
3802         gpio_bits(mask,mask);
3803
3804         if (bttv_gpio)
3805                 bttv_gpio_tracking(btv,"msp34xx");
3806         if (bttv_verbose)
3807                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3808                        "init [%d]\n", btv->c.nr, pin);
3809 }
3810
3811 static void __devinit boot_bt832(struct bttv *btv)
3812 {
3813 }
3814
3815 /* ----------------------------------------------------------------------- */
3816 /*  Imagenation L-Model PXC200 Framegrabber */
3817 /*  This is basically the same procedure as
3818  *  used by Alessandro Rubini in his pxc200
3819  *  driver, but using BTTV functions */
3820
3821 static void __devinit init_PXC200(struct bttv *btv)
3822 {
3823         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3824                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3825                                             0x00 };
3826         unsigned int i;
3827         int tmp;
3828         u32 val;
3829
3830         /* Initialise GPIO-connevted stuff */
3831         gpio_inout(0xffffff, (1<<13));
3832         gpio_write(0);
3833         udelay(3);
3834         gpio_write(1<<13);
3835         /* GPIO inputs are pulled up, so no need to drive
3836          * reset pin any longer */
3837         gpio_bits(0xffffff, 0);
3838         if (bttv_gpio)
3839                 bttv_gpio_tracking(btv,"pxc200");
3840
3841         /*  we could/should try and reset/control the AD pots? but
3842             right now  we simply  turned off the crushing.  Without
3843             this the AGC drifts drifts
3844             remember the EN is reverse logic -->
3845             setting BT848_ADC_AGC_EN disable the AGC
3846             tboult@eecs.lehigh.edu
3847         */
3848
3849         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3850
3851         /*      Initialise MAX517 DAC */
3852         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3853         bttv_I2CWrite(btv,0x5E,0,0x80,1);
3854
3855         /*      Initialise 12C508 PIC */
3856         /*      The I2CWrite and I2CRead commmands are actually to the
3857          *      same chips - but the R/W bit is included in the address
3858          *      argument so the numbers are different */
3859
3860
3861         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3862
3863         /* First of all, enable the clock line. This is used in the PXC200-F */
3864         val = btread(BT848_GPIO_DMA_CTL);
3865         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3866         btwrite(val, BT848_GPIO_DMA_CTL);
3867
3868         /* Then, push to 0 the reset pin long enough to reset the *
3869          * device same as above for the reset line, but not the same
3870          * value sent to the GPIO-connected stuff
3871          * which one is the good one? */
3872         gpio_inout(0xffffff,(1<<2));
3873         gpio_write(0);
3874         udelay(10);
3875         gpio_write(1<<2);
3876
3877         for (i = 0; i < ARRAY_SIZE(vals); i++) {
3878                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3879                 if (tmp != -1) {
3880                         printk(KERN_INFO
3881                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3882                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3883                 }
3884         }
3885
3886         printk(KERN_INFO "PXC200 Initialised.\n");
3887 }
3888
3889
3890
3891 /* ----------------------------------------------------------------------- */
3892 /*
3893  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3894  *  it. This apparently involves the following procedure for each 878 chip:
3895  *
3896  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
3897  *
3898  *  2)  write to GPIO_DATA
3899  *      - 0x0E
3900  *      - sleep 1ms
3901  *      - 0x10 + 0x0E
3902  *      - sleep 10ms
3903  *      - 0x0E
3904  *     read from GPIO_DATA into buf (uint_32)
3905  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3906  *                 error. ERROR_CPLD_Check_Failed stop.
3907  *
3908  *  3) write to GPIO_DATA
3909  *      - write 0x4400 + 0x0E
3910  *      - sleep 10ms
3911  *      - write 0x4410 + 0x0E
3912  *      - sleep 1ms
3913  *      - write 0x0E
3914  *     read from GPIO_DATA into buf (uint_32)
3915  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3916  *                error. ERROR_CPLD_Check_Failed.
3917  */
3918 /* ----------------------------------------------------------------------- */
3919 static void
3920 init_RTV24 (struct bttv *btv)
3921 {
3922         uint32_t dataRead = 0;
3923         long watchdog_value = 0x0E;
3924
3925         printk (KERN_INFO
3926                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3927                 btv->c.nr);
3928
3929         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
3930
3931         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3932         msleep (1);
3933         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
3934         msleep (10);
3935         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3936
3937         dataRead = btread (BT848_GPIO_DATA);
3938
3939         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
3940                 printk (KERN_INFO
3941                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3942                         btv->c.nr, dataRead);
3943         }
3944
3945         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
3946         msleep (10);
3947         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
3948         msleep (1);
3949         btwrite (watchdog_value, BT848_GPIO_DATA);
3950         msleep (1);
3951         dataRead = btread (BT848_GPIO_DATA);
3952
3953         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
3954                 printk (KERN_INFO
3955                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3956                         btv->c.nr, dataRead);
3957
3958                 return;
3959         }
3960
3961         printk (KERN_INFO
3962                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
3963 }
3964
3965
3966
3967 /* ----------------------------------------------------------------------- */
3968 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
3969 /*
3970  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3971  * This code is placed under the terms of the GNU General Public License
3972  *
3973  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3974  */
3975
3976 static void bus_low(struct bttv *btv, int bit)
3977 {
3978         if (btv->mbox_ior) {
3979                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3980                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3981                 udelay(5);
3982         }
3983
3984         gpio_bits(bit,0);
3985         udelay(5);
3986
3987         if (btv->mbox_ior) {
3988                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3989                 udelay(5);
3990         }
3991 }
3992
3993 static void bus_high(struct bttv *btv, int bit)
3994 {
3995         if (btv->mbox_ior) {
3996                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3997                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3998                 udelay(5);
3999         }
4000
4001         gpio_bits(bit,bit);
4002         udelay(5);
4003
4004         if (btv->mbox_ior) {
4005                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4006                 udelay(5);
4007         }
4008 }
4009
4010 static int bus_in(struct bttv *btv, int bit)
4011 {
4012         if (btv->mbox_ior) {
4013                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4014                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4015                 udelay(5);
4016
4017                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4018                 udelay(5);
4019         }
4020         return gpio_read() & (bit);
4021 }
4022
4023 /* TEA5757 register bits */
4024 #define TEA_FREQ                0:14
4025 #define TEA_BUFFER              15:15
4026
4027 #define TEA_SIGNAL_STRENGTH     16:17
4028
4029 #define TEA_PORT1               18:18
4030 #define TEA_PORT0               19:19
4031
4032 #define TEA_BAND                20:21
4033 #define TEA_BAND_FM             0
4034 #define TEA_BAND_MW             1
4035 #define TEA_BAND_LW             2
4036 #define TEA_BAND_SW             3
4037
4038 #define TEA_MONO                22:22
4039 #define TEA_ALLOW_STEREO        0
4040 #define TEA_FORCE_MONO          1
4041
4042 #define TEA_SEARCH_DIRECTION    23:23
4043 #define TEA_SEARCH_DOWN         0
4044 #define TEA_SEARCH_UP           1
4045
4046 #define TEA_STATUS              24:24
4047 #define TEA_STATUS_TUNED        0
4048 #define TEA_STATUS_SEARCHING    1
4049
4050 /* Low-level stuff */
4051 static int tea5757_read(struct bttv *btv)
4052 {
4053         unsigned long timeout;
4054         int value = 0;
4055         int i;
4056
4057         /* better safe than sorry */
4058         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4059
4060         if (btv->mbox_ior) {
4061                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4062                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4063                 udelay(5);
4064         }
4065
4066         if (bttv_gpio)
4067                 bttv_gpio_tracking(btv,"tea5757 read");
4068
4069         bus_low(btv,btv->mbox_we);
4070         bus_low(btv,btv->mbox_clk);
4071
4072         udelay(10);
4073         timeout= jiffies + HZ;
4074
4075         /* wait for DATA line to go low; error if it doesn't */
4076         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4077                 schedule();
4078         if (bus_in(btv,btv->mbox_data)) {
4079                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4080                 return -1;
4081         }
4082
4083         dprintk("bttv%d: tea5757:",btv->c.nr);
4084         for(i = 0; i < 24; i++)
4085         {
4086                 udelay(5);
4087                 bus_high(btv,btv->mbox_clk);
4088                 udelay(5);
4089                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4090                 bus_low(btv,btv->mbox_clk);
4091                 value <<= 1;
4092                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4093                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4094         }
4095         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4096         return value;
4097 }
4098
4099 static int tea5757_write(struct bttv *btv, int value)
4100 {
4101         int i;
4102         int reg = value;
4103
4104         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4105
4106         if (btv->mbox_ior) {
4107                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4108                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4109                 udelay(5);
4110         }
4111         if (bttv_gpio)
4112                 bttv_gpio_tracking(btv,"tea5757 write");
4113
4114         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4115         bus_low(btv,btv->mbox_clk);
4116         bus_high(btv,btv->mbox_we);
4117         for(i = 0; i < 25; i++)
4118         {
4119                 if (reg & 0x1000000)
4120                         bus_high(btv,btv->mbox_data);
4121                 else
4122                         bus_low(btv,btv->mbox_data);
4123                 reg <<= 1;
4124                 bus_high(btv,btv->mbox_clk);
4125                 udelay(10);
4126                 bus_low(btv,btv->mbox_clk);
4127                 udelay(10);
4128         }
4129         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4130         return 0;
4131 }
4132
4133 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4134 {
4135         dprintk("tea5757_set_freq %d\n",freq);
4136         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4137 }
4138
4139
4140 /* ----------------------------------------------------------------------- */
4141 /* winview                                                                 */
4142
4143 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4144 {
4145         /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4146         int bits_out, loops, vol, data;
4147
4148         if (!set) {
4149                 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4150                 v->flags |= VIDEO_AUDIO_VOLUME;
4151                 return;
4152         }
4153
4154         /* 32 levels logarithmic */
4155         vol = 32 - ((v->volume>>11));
4156         /* units */
4157         bits_out = (PT2254_DBS_IN_2>>(vol%5));
4158         /* tens */
4159         bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4160         bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4161         data = gpio_read();
4162         data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4163                   WINVIEW_PT2254_STROBE);
4164         for (loops = 17; loops >= 0 ; loops--) {
4165                 if (bits_out & (1<<loops))
4166                         data |=  WINVIEW_PT2254_DATA;
4167                 else
4168                         data &= ~WINVIEW_PT2254_DATA;
4169                 gpio_write(data);
4170                 udelay(5);
4171                 data |= WINVIEW_PT2254_CLK;
4172                 gpio_write(data);
4173                 udelay(5);
4174                 data &= ~WINVIEW_PT2254_CLK;
4175                 gpio_write(data);
4176         }
4177         data |=  WINVIEW_PT2254_STROBE;
4178         data &= ~WINVIEW_PT2254_DATA;
4179         gpio_write(data);
4180         udelay(10);
4181         data &= ~WINVIEW_PT2254_STROBE;
4182         gpio_write(data);
4183 }
4184
4185 /* ----------------------------------------------------------------------- */
4186 /* mono/stereo control for various cards (which don't use i2c chips but    */
4187 /* connect something to the GPIO pins                                      */
4188
4189 static void
4190 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4191 {
4192         unsigned int con = 0;
4193
4194         if (set) {
4195                 gpio_inout(0x300, 0x300);
4196                 if (v->mode & VIDEO_SOUND_LANG1)
4197                         con = 0x000;
4198                 if (v->mode & VIDEO_SOUND_LANG2)
4199                         con = 0x300;
4200                 if (v->mode & VIDEO_SOUND_STEREO)
4201                         con = 0x200;
4202 /*              if (v->mode & VIDEO_SOUND_MONO)
4203  *                      con = 0x100; */
4204                 gpio_bits(0x300, con);
4205         } else {
4206                 v->mode = VIDEO_SOUND_STEREO |
4207                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4208         }
4209 }
4210
4211 static void
4212 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4213 {
4214         unsigned int val, con;
4215
4216         if (btv->radio_user)
4217                 return;
4218
4219         val = gpio_read();
4220         if (set) {
4221                 con = 0x000;
4222                 if (v->mode & VIDEO_SOUND_LANG2) {
4223                         if (v->mode & VIDEO_SOUND_LANG1) {
4224                                 /* LANG1 + LANG2 */
4225                                 con = 0x100;
4226                         }
4227                         else {
4228                                 /* LANG2 */
4229                                 con = 0x300;
4230                         }
4231                 }
4232                 if (con != (val & 0x300)) {
4233                         gpio_bits(0x300, con);
4234                         if (bttv_gpio)
4235                                 bttv_gpio_tracking(btv,"gvbctv5pci");
4236                 }
4237         } else {
4238                 switch (val & 0x70) {
4239                   case 0x10:
4240                         v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4241                         break;
4242                   case 0x30:
4243                         v->mode = VIDEO_SOUND_LANG2;
4244                         break;
4245                   case 0x50:
4246                         v->mode = VIDEO_SOUND_LANG1;
4247                         break;
4248                   case 0x60:
4249                         v->mode = VIDEO_SOUND_STEREO;
4250                         break;
4251                   case 0x70:
4252                         v->mode = VIDEO_SOUND_MONO;
4253                         break;
4254                   default:
4255                         v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4256                                   VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4257                 }
4258         }
4259 }
4260
4261 /*
4262  * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4263  *  I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4264  *  0xdde enables mono and 0xccd enables sap
4265  *
4266  * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4267  *  P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4268  *  input/output sound connection, so both must be set for output mode.
4269  *
4270  * Looks like it's needed only for the "tvphone", the "tvphone 98"
4271  * handles this with a tda9840
4272  *
4273  */
4274 static void
4275 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4276 {
4277         int val = 0;
4278
4279         if (set) {
4280                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4281                         val = 0x02;
4282                 if (v->mode & VIDEO_SOUND_STEREO)
4283                         val = 0x01;
4284                 if (val) {
4285                         gpio_bits(0x03,val);
4286                         if (bttv_gpio)
4287                                 bttv_gpio_tracking(btv,"avermedia");
4288                 }
4289         } else {
4290                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4291                         VIDEO_SOUND_LANG1;
4292                 return;
4293         }
4294 }
4295
4296 static void
4297 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4298 {
4299         int val = 0;
4300
4301         if (set) {
4302                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4303                         val = 0x01;
4304                 if (v->mode & VIDEO_SOUND_STEREO)  /* STEREO */
4305                         val = 0x02;
4306                 btaor(val, ~0x03, BT848_GPIO_DATA);
4307                 if (bttv_gpio)
4308                         bttv_gpio_tracking(btv,"avermedia");
4309         } else {
4310                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4311                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4312                 return;
4313         }
4314 }
4315
4316 /* Lifetec 9415 handling */
4317 static void
4318 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4319 {
4320         int val = 0;
4321
4322         if (gpio_read() & 0x4000) {
4323                 v->mode = VIDEO_SOUND_MONO;
4324                 return;
4325         }
4326
4327         if (set) {
4328                 if (v->mode & VIDEO_SOUND_LANG2)  /* A2 SAP */
4329                         val = 0x0080;
4330                 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4331                         val = 0x0880;
4332                 if ((v->mode & VIDEO_SOUND_LANG1) ||
4333                     (v->mode & VIDEO_SOUND_MONO))
4334                         val = 0;
4335                 gpio_bits(0x0880, val);
4336                 if (bttv_gpio)
4337                         bttv_gpio_tracking(btv,"lt9415");
4338         } else {
4339                 /* autodetect doesn't work with this card :-( */
4340                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4341                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4342                 return;
4343         }
4344 }
4345
4346 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4347 static void
4348 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4349 {
4350         unsigned int con = 0;
4351
4352         if (set) {
4353                 gpio_inout(0x180000,0x180000);
4354                 if (v->mode & VIDEO_SOUND_LANG2)
4355                         con = 0x080000;
4356                 if (v->mode & VIDEO_SOUND_STEREO)
4357                         con = 0x180000;
4358                 gpio_bits(0x180000, con);
4359                 if (bttv_gpio)
4360                         bttv_gpio_tracking(btv,"terratv");
4361         } else {
4362                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4363                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4364         }
4365 }
4366
4367 static void
4368 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4369 {
4370         unsigned long val = 0;
4371
4372         if (set) {
4373                 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4374                 if (v->mode & VIDEO_SOUND_MONO)         /* Mono */
4375                         val = 0x420000;
4376                 if (v->mode & VIDEO_SOUND_LANG1)        /* Mono */
4377                         val = 0x420000;
4378                 if (v->mode & VIDEO_SOUND_LANG2)        /* SAP */
4379                         val = 0x410000;
4380                 if (v->mode & VIDEO_SOUND_STEREO)       /* Stereo */
4381                         val = 0x020000;
4382                 if (val) {
4383                         gpio_bits(0x430000, val);
4384                         if (bttv_gpio)
4385                                 bttv_gpio_tracking(btv,"winfast2000");
4386                 }
4387         } else {
4388                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4389                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4390         }
4391 }
4392
4393 /*
4394  * Dariusz Kowalewski <darekk@automex.pl>
4395  * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4396  * revision 9B has on-board TDA9874A sound decoder).
4397  *
4398  * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4399  *       will mute this cards.
4400  */
4401 static void
4402 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4403 {
4404         unsigned int val = 0;
4405
4406         if (btv->radio_user)
4407                 return;
4408
4409         if (set) {
4410                 if (v->mode & VIDEO_SOUND_MONO) {
4411                         val = 0x01;
4412                 }
4413                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4414                     || (v->mode & VIDEO_SOUND_STEREO)) {
4415                         val = 0x02;
4416                 }
4417                 if (val) {
4418                         gpio_bits(0x03,val);
4419                         if (bttv_gpio)
4420                                 bttv_gpio_tracking(btv,"pvbt878p9b");
4421                 }
4422         } else {
4423                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4424                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4425         }
4426 }
4427
4428 /*
4429  * Dariusz Kowalewski <darekk@automex.pl>
4430  * sound control for FlyVideo 2000S (with tda9874 decoder)
4431  * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4432  */
4433 static void
4434 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4435 {
4436         unsigned int val = 0xffff;
4437
4438         if (btv->radio_user)
4439                 return;
4440         if (set) {
4441                 if (v->mode & VIDEO_SOUND_MONO) {
4442                         val = 0x0000;
4443                 }
4444                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4445                     || (v->mode & VIDEO_SOUND_STEREO)) {
4446                         val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4447                 }
4448                 if (val != 0xffff) {
4449                         gpio_bits(0x1800, val);
4450                         if (bttv_gpio)
4451                                 bttv_gpio_tracking(btv,"fv2000s");
4452                 }
4453         } else {
4454                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4455                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4456         }
4457 }
4458
4459 /*
4460  * sound control for Canopus WinDVR PCI
4461  * Masaki Suzuki <masaki@btree.org>
4462  */
4463 static void
4464 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4465 {
4466         unsigned long val = 0;
4467
4468         if (set) {
4469                 if (v->mode & VIDEO_SOUND_MONO)
4470                         val = 0x040000;
4471                 if (v->mode & VIDEO_SOUND_LANG1)
4472                         val = 0;
4473                 if (v->mode & VIDEO_SOUND_LANG2)
4474                         val = 0x100000;
4475                 if (v->mode & VIDEO_SOUND_STEREO)
4476                         val = 0;
4477                 if (val) {
4478                         gpio_bits(0x140000, val);
4479                         if (bttv_gpio)
4480                                 bttv_gpio_tracking(btv,"windvr");
4481                 }
4482         } else {
4483                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4484                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4485         }
4486 }
4487
4488 /*
4489  * sound control for AD-TVK503
4490  * Hiroshi Takekawa <sian@big.or.jp>
4491  */
4492 static void
4493 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4494 {
4495         unsigned int con = 0xffffff;
4496
4497         /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4498
4499         if (set) {
4500                 /* btor(***, BT848_GPIO_OUT_EN); */
4501                 if (v->mode & VIDEO_SOUND_LANG1)
4502                         con = 0x00000000;
4503                 if (v->mode & VIDEO_SOUND_LANG2)
4504                         con = 0x00180000;
4505                 if (v->mode & VIDEO_SOUND_STEREO)
4506                         con = 0x00000000;
4507                 if (v->mode & VIDEO_SOUND_MONO)
4508                         con = 0x00060000;
4509                 if (con != 0xffffff) {
4510                         gpio_bits(0x1e0000,con);
4511                         if (bttv_gpio)
4512                                 bttv_gpio_tracking(btv, "adtvk503");
4513                 }
4514         } else {
4515                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4516                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4517         }
4518 }
4519
4520 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4521  *
4522  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4523  * switch instead (CD22M3494E). This IC can have multiple active connections
4524  * between Xn (input) and Yn (output) pins. We need to clear any existing
4525  * connection prior to establish a new one, pulsing the STROBE pin.
4526  *
4527  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4528  * GPIO pins are wired as:
4529  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4530  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4531  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroler)
4532  *  GPIO[8]   -                  - P3[5] (microcontroler)
4533  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroler)
4534  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroler)
4535  *  GPINTR    -                  - P3[4] (microcontroler)
4536  *
4537  * The microcontroler is a 80C32 like. It should be possible to change xpoint
4538  * configuration either directly (as we are doing) or using the microcontroler
4539  * which is also wired to I2C interface. I have no further info on the
4540  * microcontroler features, one would need to disassembly the firmware.
4541  * note: the vendor refused to give any information on this product, all
4542  *       that stuff was found using a multimeter! :)
4543  */
4544 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4545 {
4546         /* reset all conections */
4547         gpio_bits(0x200,0x200);
4548         mdelay(1);
4549         gpio_bits(0x200,0x000);
4550         mdelay(1);
4551
4552         /* create a new conection */
4553         gpio_bits(0x480,0x080);
4554         gpio_bits(0x480,0x480);
4555         mdelay(1);
4556         gpio_bits(0x480,0x080);
4557         mdelay(1);
4558 }
4559
4560 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4561  *
4562  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4563  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4564  * chips, ten eight input analog multiplexors, a not chip and a few
4565  * other components.
4566  *
4567  * 16 inputs on a secondary bracket are provided and can be selected
4568  * from each of the four capture chips.  Two of the eight input
4569  * multiplexors are used to select from any of the 16 input signals.
4570  *
4571  * Unsupported hardware capabilities:
4572  *  . A video output monitor on the secondary bracket can be selected from
4573  *    one of the 878A chips.
4574  *  . Another passthrough but I haven't spent any time investigating it.
4575  *  . Digital I/O (logic level connected to GPIO) is available from an
4576  *    onboard header.
4577  *
4578  * The on chip input mux should always be set to 2.
4579  * GPIO[16:19] - Video input selection
4580  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4581  * GPIO[?:?]   - Digital I/O.
4582  *
4583  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4584  * determined what function (if any) it provides.  With the microcontroller
4585  * and sync seperator chips a guess is that it might have to do with video
4586  * switching and maybe some digital I/O.
4587  */
4588 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4589 {
4590         /* video mux */
4591         gpio_bits(0x0f0000, input << 16);
4592 }
4593
4594 static void tibetCS16_init(struct bttv *btv)
4595 {
4596         /* enable gpio bits, mask obtained via btSpy */
4597         gpio_inout(0xffffff, 0x0f7fff);
4598         gpio_write(0x0f7fff);
4599 }
4600
4601 /*
4602  * The following routines for the Kodicom-4400r get a little mind-twisting.
4603  * There is a "master" controller and three "slave" controllers, together
4604  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4605  * The analog switch is controlled by the "master", but the detection order
4606  * of the four BT878A chips is in an order which I just don't understand.
4607  * The "master" is actually the second controller to be detected.  The
4608  * logic on the board uses logical numbers for the 4 controlers, but
4609  * those numbers are different from the detection sequence.  When working
4610  * with the analog switch, we need to "map" from the detection sequence
4611  * over to the board's logical controller number.  This mapping sequence
4612  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4613  * unit 3, the second (which is the master) is logical unit 0, etc.
4614  * We need to maintain the status of the analog switch (which of the 16
4615  * cameras is connected to which of the 4 controllers).  Rather than
4616  * add to the bttv structure for this, we use the data reserved for
4617  * the mbox (unused for this card type).
4618  */
4619
4620 /*
4621  * First a routine to set the analog switch, which controls which camera
4622  * is routed to which controller.  The switch comprises an X-address
4623  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4624  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4625  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4626  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4627  * specified address.  The idea is to set the address and data, then bring
4628  * STROBE high, and finally bring STROBE back to low.
4629  */
4630 static void kodicom4400r_write(struct bttv *btv,
4631                                unsigned char xaddr,
4632                                unsigned char yaddr,
4633                                unsigned char data) {
4634         unsigned int udata;
4635
4636         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4637         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4638         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4639         gpio_bits(0x1ff, udata);                /* strobe low */
4640 }
4641
4642 /*
4643  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4644  * use this routine.  The routine finds the "master" for the card, maps
4645  * the controller number from the detected position over to the logical
4646  * number, writes the appropriate data to the analog switch, and housekeeps
4647  * the local copy of the switch information.  The parameter 'input' is the
4648  * requested camera number (0 - 15).
4649  */
4650 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4651 {
4652         char *sw_status;
4653         int xaddr, yaddr;
4654         struct bttv *mctlr;
4655         static unsigned char map[4] = {3, 0, 2, 1};
4656
4657         mctlr = master[btv->c.nr];
4658         if (mctlr == NULL) {    /* ignore if master not yet detected */
4659                 return;
4660         }
4661         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4662         yaddr = map[yaddr];
4663         sw_status = (char *)(&mctlr->mbox_we);
4664         xaddr = input & 0xf;
4665         /* Check if the controller/camera pair has changed, else ignore */
4666         if (sw_status[yaddr] != xaddr)
4667         {
4668                 /* "open" the old switch, "close" the new one, save the new */
4669                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4670                 sw_status[yaddr] = xaddr;
4671                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4672         }
4673 }
4674
4675 /*
4676  * During initialisation, we need to reset the analog switch.  We
4677  * also preset the switch to map the 4 connectors on the card to the
4678  * *user's* (see above description of kodicom4400r_muxsel) channels
4679  * 0 through 3
4680  */
4681 static void kodicom4400r_init(struct bttv *btv)
4682 {
4683         char *sw_status = (char *)(&btv->mbox_we);
4684         int ix;
4685
4686         gpio_inout(0x0003ff, 0x0003ff);
4687         gpio_write(1 << 9);     /* reset MUX */
4688         gpio_write(0);
4689         /* Preset camera 0 to the 4 controllers */
4690         for (ix=0; ix<4; ix++) {
4691                 sw_status[ix] = ix;
4692                 kodicom4400r_write(btv, ix, ix, 1);
4693         }
4694         /*
4695          * Since this is the "master", we need to set up the
4696          * other three controller chips' pointers to this structure
4697          * for later use in the muxsel routine.
4698          */
4699         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4700             return;
4701         master[btv->c.nr-1] = btv;
4702         master[btv->c.nr]   = btv;
4703         master[btv->c.nr+1] = btv;
4704         master[btv->c.nr+2] = btv;
4705 }
4706
4707 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4708  * video multiplexers to provide up to 16 video inputs. These
4709  * multiplexers are controlled by the lower 8 GPIO pins of the
4710  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4711
4712  * xxx0 is pin xxx of multiplexer U5,
4713  * yyy1 is pin yyy of multiplexer U2
4714  */
4715 #define ENA0    0x01
4716 #define ENB0    0x02
4717 #define ENA1    0x04
4718 #define ENB1    0x08
4719
4720 #define IN10    0x10
4721 #define IN00    0x20
4722 #define IN11    0x40
4723 #define IN01    0x80
4724
4725 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4726 {
4727         static const int masks[] = {
4728                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4729                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4730                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4731                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4732         };
4733         gpio_write(masks[input%16]);
4734 }
4735 static void picolo_tetra_init(struct bttv *btv)
4736 {
4737         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4738         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4739         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4740 }
4741 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4742 {
4743
4744         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4745         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4746         /*GPIO[20]&GPIO[21] used to choose the right input*/
4747         btwrite (input<<20,BT848_GPIO_DATA);
4748
4749 }
4750
4751 /*
4752  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4753  *
4754  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4755  * swichers to provide 16 channels to MUX0. The TDA8540's have
4756  * 4 indepedant outputs and as such the IVC120G also has the
4757  * optional "Monitor Out" bus. This allows the card to be looking
4758  * at one input while the monitor is looking at another.
4759  *
4760  * Since I've couldn't be bothered figuring out how to add an
4761  * independant muxsel for the monitor bus, I've just set it to
4762  * whatever the card is looking at.
4763  *
4764  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4765  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4766  *
4767  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4768  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4769  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4770  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4771  *
4772  */
4773
4774 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4775 #define I2C_TDA8540        0x90
4776 #define I2C_TDA8540_ALT1   0x92
4777 #define I2C_TDA8540_ALT2   0x94
4778 #define I2C_TDA8540_ALT3   0x96
4779 #define I2C_TDA8540_ALT4   0x98
4780 #define I2C_TDA8540_ALT5   0x9a
4781 #define I2C_TDA8540_ALT6   0x9c
4782
4783 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4784 {
4785         /* Simple maths */
4786         int key = input % 4;
4787         int matrix = input / 4;
4788
4789         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4790                 btv->c.nr, input, matrix, key);
4791
4792         /* Handles the input selection on the TDA8540's */
4793         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4794                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4795         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4796                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4797         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4798                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4799         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4800                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4801
4802         /* Handles the output enables on the TDA8540's */
4803         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4804                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4805         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4806                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4807         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4808                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4809         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4810                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4811
4812         /* Selects MUX0 for input on the 878 */
4813         btaor((0)<<5, ~(3<<5), BT848_IFORM);
4814 }
4815
4816
4817 /* PXC200 muxsel helper
4818  * luke@syseng.anu.edu.au
4819  * another transplant
4820  * from Alessandro Rubini (rubini@linux.it)
4821  *
4822  * There are 4 kinds of cards:
4823  * PXC200L which is bt848
4824  * PXC200F which is bt848 with PIC controlling mux
4825  * PXC200AL which is bt878
4826  * PXC200AF which is bt878 with PIC controlling mux
4827  */
4828 #define PX_CFG_PXC200F 0x01
4829 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4830 #define PX_I2C_PIC       0x0f
4831 #define PX_PXC200A_CARDID 0x200a1295
4832 #define PX_I2C_CMD_CFG   0x00
4833
4834 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4835 {
4836         int rc;
4837         long mux;
4838         int bitmask;
4839         unsigned char buf[2];
4840
4841         /* Read PIC config to determine if this is a PXC200F */
4842         /* PX_I2C_CMD_CFG*/
4843         buf[0]=0;
4844         buf[1]=0;
4845         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4846         if (rc) {
4847           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4848           /* not PXC ? do nothing */
4849           return;
4850         }
4851
4852         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4853         if (!(rc & PX_CFG_PXC200F)) {
4854           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4855           return;
4856         }
4857
4858
4859         /* The multiplexer in the 200F is handled by the GPIO port */
4860         /* get correct mapping between inputs  */
4861         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4862         /* ** not needed!?   */
4863         mux = input;
4864
4865         /* make sure output pins are enabled */
4866         /* bitmask=0x30f; */
4867         bitmask=0x302;
4868         /* check whether we have a PXC200A */
4869         if (btv->cardid == PX_PXC200A_CARDID)  {
4870            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4871            bitmask |= 7<<4; /* the DAC */
4872         }
4873         btwrite(bitmask, BT848_GPIO_OUT_EN);
4874
4875         bitmask = btread(BT848_GPIO_DATA);
4876         if (btv->cardid == PX_PXC200A_CARDID)
4877           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4878         else /* older device */
4879           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4880         btwrite(bitmask,BT848_GPIO_DATA);
4881
4882         /*
4883          * Was "to be safe, set the bt848 to input 0"
4884          * Actually, since it's ok at load time, better not messing
4885          * with these bits (on PXC200AF you need to set mux 2 here)
4886          *
4887          * needed because bttv-driver sets mux before calling this function
4888          */
4889         if (btv->cardid == PX_PXC200A_CARDID)
4890           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4891         else /* older device */
4892           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4893
4894         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4895 }
4896
4897 /* ----------------------------------------------------------------------- */
4898 /* motherboard chipset specific stuff                                      */
4899
4900 void __devinit bttv_check_chipset(void)
4901 {
4902         int pcipci_fail = 0;
4903         struct pci_dev *dev = NULL;
4904
4905         if (pci_pci_problems & PCIPCI_FAIL)
4906                 pcipci_fail = 1;
4907         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4908                 triton1 = 1;
4909         if (pci_pci_problems & PCIPCI_VSFX)
4910                 vsfx = 1;
4911 #ifdef PCIPCI_ALIMAGIK
4912         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4913                 latency = 0x0A;
4914 #endif
4915
4916
4917         /* print warnings about any quirks found */
4918         if (triton1)
4919                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4920         if (vsfx)
4921                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4922         if (pcipci_fail) {
4923                 printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
4924                 if (!no_overlay) {
4925                         printk(KERN_WARNING "bttv: overlay will be disabled.\n");
4926                         no_overlay = 1;
4927                 } else {
4928                         printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
4929                 }
4930         }
4931         if (UNSET != latency)
4932                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4933         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4934                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4935                 unsigned char b;
4936                 pci_read_config_byte(dev, 0x53, &b);
4937                 if (bttv_debug)
4938                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4939                                "bufcon=0x%02x\n",b);
4940         }
4941 }
4942
4943 int __devinit bttv_handle_chipset(struct bttv *btv)
4944 {
4945         unsigned char command;
4946
4947         if (!triton1 && !vsfx && UNSET == latency)
4948                 return 0;
4949
4950         if (bttv_verbose) {
4951                 if (triton1)
4952                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4953                 if (vsfx && btv->id >= 878)
4954                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4955                 if (UNSET != latency)
4956                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4957                                btv->c.nr,latency);
4958         }
4959
4960         if (btv->id < 878) {
4961                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4962                 if (triton1)
4963                         btv->triton1 = BT848_INT_ETBF;
4964         } else {
4965                 /* bt878 has a bit in the pci config space for it */
4966                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4967                 if (triton1)
4968                         command |= BT878_EN_TBFX;
4969                 if (vsfx)
4970                         command |= BT878_EN_VSFX;
4971                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4972         }
4973         if (UNSET != latency)
4974                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4975         return 0;
4976 }
4977
4978
4979 /*
4980  * Local variables:
4981  * c-basic-offset: 8
4982  * End:
4983  */