2 * Copyright (C) 2008-2009 Texas Instruments Inc
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 * Image Sensor Interface (ISIF) driver
20 * This driver is for configuring the ISIF IP available on DM365 or any other
21 * TI SoCs. This is used for capturing yuv or bayer video or image data
22 * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
23 * and DM6446, but with enhanced or additional ip blocks. The driver
24 * configures the ISIF upon commands from the vpfe bridge driver through
25 * ccdc_hw_device interface.
27 * TODO: 1) Raw bayer parameter settings and bayer capture
28 * 2) Add support for control ioctl
30 #include <linux/delay.h>
31 #include <linux/platform_device.h>
32 #include <linux/uaccess.h>
34 #include <linux/videodev2.h>
35 #include <linux/clk.h>
36 #include <linux/err.h>
40 #include <media/davinci/isif.h>
41 #include <media/davinci/vpss.h>
43 #include "isif_regs.h"
44 #include "ccdc_hw_device.h"
46 /* Defaults for module configuration parameters */
47 static struct isif_config_params_raw isif_config_defaults = {
50 .corr_shft = ISIF_NO_SHIFT,
83 /* ISIF operation configuration */
84 static struct isif_oper_config {
86 enum vpfe_hw_if_type if_type;
87 struct isif_ycbcr_config ycbcr;
88 struct isif_params_raw bayer;
89 enum isif_data_pack data_pack;
92 /* ISIF base address */
93 void __iomem *base_addr;
94 /* ISIF Linear Table 0 */
95 void __iomem *linear_tbl0_addr;
96 /* ISIF Linear Table 1 */
97 void __iomem *linear_tbl1_addr;
100 .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
101 .frm_fmt = CCDC_FRMFMT_INTERLACED,
102 .win = ISIF_WIN_NTSC,
103 .fid_pol = VPFE_PINPOL_POSITIVE,
104 .vd_pol = VPFE_PINPOL_POSITIVE,
105 .hd_pol = VPFE_PINPOL_POSITIVE,
106 .pix_order = CCDC_PIXORDER_CBYCRY,
107 .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
110 .pix_fmt = CCDC_PIXFMT_RAW,
111 .frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
113 .fid_pol = VPFE_PINPOL_POSITIVE,
114 .vd_pol = VPFE_PINPOL_POSITIVE,
115 .hd_pol = VPFE_PINPOL_POSITIVE,
122 .cfa_pat = ISIF_CFA_PAT_MOSAIC,
123 .data_msb = ISIF_BIT_MSB_11,
125 .data_shift = ISIF_NO_SHIFT,
127 .olop = ISIF_GREEN_BLUE,
130 .elep = ISIF_GREEN_RED,
133 .olop = ISIF_GREEN_BLUE,
136 .elep = ISIF_GREEN_RED,
141 .data_pack = ISIF_DATA_PACK8,
144 /* Raw Bayer formats */
145 static const u32 isif_raw_bayer_pix_formats[] = {
146 V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
148 /* Raw YUV formats */
149 static const u32 isif_raw_yuv_pix_formats[] = {
150 V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
152 /* register access routines */
153 static inline u32 regr(u32 offset)
155 return __raw_readl(isif_cfg.base_addr + offset);
158 static inline void regw(u32 val, u32 offset)
160 __raw_writel(val, isif_cfg.base_addr + offset);
163 /* reg_modify() - read, modify and write register */
164 static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
166 u32 new_val = (regr(offset) & ~mask) | (val & mask);
168 regw(new_val, offset);
172 static inline void regw_lin_tbl(u32 val, u32 offset, int i)
175 __raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
177 __raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
180 static void isif_disable_all_modules(void)
188 /* disable linearization */
190 /* disable other modules here as they are supported */
193 static void isif_enable(int en)
196 /* Before disable isif, disable all ISIF modules */
197 isif_disable_all_modules();
199 * wait for next VD. Assume lowest scan rate is 12 Hz. So
200 * 100 msec delay is good enough
204 reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
207 static void isif_enable_output_to_sdram(int en)
209 reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
212 static void isif_config_culling(struct isif_cul *cul)
216 /* Horizontal pattern */
217 val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
220 /* vertical pattern */
221 regw(cul->vcpat, CULV);
224 reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
225 cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
228 static void isif_config_gain_offset(void)
230 struct isif_gain_offsets_adj *gain_off_p =
231 &isif_cfg.bayer.config_params.gain_offset;
234 val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
235 (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
236 (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
237 (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
238 (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
239 (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
241 reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
243 val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
244 gain_off_p->gain.r_ye.decimal;
247 val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
248 gain_off_p->gain.gr_cy.decimal;
251 val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
252 gain_off_p->gain.gb_g.decimal;
255 val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
256 gain_off_p->gain.b_mg.decimal;
259 regw(gain_off_p->offset, COFSTA);
262 static void isif_restore_defaults(void)
264 enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
266 dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
267 isif_cfg.bayer.config_params = isif_config_defaults;
268 /* Enable clock to ISIF, IPIPEIF and BL */
269 vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
270 vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
271 vpss_enable_clock(VPSS_BL_CLOCK, 1);
272 /* Set default offset and gain */
273 isif_config_gain_offset();
274 vpss_select_ccdc_source(source);
275 dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
278 static int isif_open(struct device *device)
280 isif_restore_defaults();
284 /* This function will configure the window size to be capture in ISIF reg */
285 static void isif_setwin(struct v4l2_rect *image_win,
286 enum ccdc_frmfmt frm_fmt, int ppc)
288 int horz_start, horz_nr_pixels;
289 int vert_start, vert_nr_lines;
292 dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
294 * ppc - per pixel count. indicates how many pixels per cell
295 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
296 * raw capture this is 1
298 horz_start = image_win->left << (ppc - 1);
299 horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
301 /* Writing the horizontal info into the registers */
302 regw(horz_start & START_PX_HOR_MASK, SPH);
303 regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
304 vert_start = image_win->top;
306 if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
307 vert_nr_lines = (image_win->height >> 1) - 1;
309 /* To account for VD since line 0 doesn't have any data */
312 /* To account for VD since line 0 doesn't have any data */
314 vert_nr_lines = image_win->height - 1;
315 /* configure VDINT0 and VDINT1 */
316 mid_img = vert_start + (image_win->height / 2);
317 regw(mid_img, VDINT1);
321 regw(vert_start & START_VER_ONE_MASK, SLV0);
322 regw(vert_start & START_VER_TWO_MASK, SLV1);
323 regw(vert_nr_lines & NUM_LINES_VER, LNV);
326 static void isif_config_bclamp(struct isif_black_clamp *bc)
331 * DC Offset is always added to image data irrespective of bc enable
334 regw(bc->dc_offset, CLDCOFST);
337 val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
339 /* Enable BC and horizontal clamp caculation paramaters */
340 val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
344 if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
346 * Window count for calculation
347 * Base window selection
349 * Horizontal size of window
350 * vertical size of the window
351 * Horizontal start position of the window
352 * Vertical start position of the window
354 val = bc->horz.win_count_calc |
355 ((!!bc->horz.base_win_sel_calc) <<
356 ISIF_HORZ_BC_WIN_SEL_SHIFT) |
357 ((!!bc->horz.clamp_pix_limit) <<
358 ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
359 (bc->horz.win_h_sz_calc <<
360 ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
361 (bc->horz.win_v_sz_calc <<
362 ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
365 regw(bc->horz.win_start_h_calc, CLHWIN1);
366 regw(bc->horz.win_start_v_calc, CLHWIN2);
369 /* vertical clamp caculation paramaters */
371 /* Reset clamp value sel for previous line */
373 (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
374 (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
377 /* Optical Black horizontal start position */
378 regw(bc->vert.ob_start_h, CLVWIN1);
379 /* Optical Black vertical start position */
380 regw(bc->vert.ob_start_v, CLVWIN2);
381 /* Optical Black vertical size for calculation */
382 regw(bc->vert.ob_v_sz_calc, CLVWIN3);
383 /* Vertical start position for BC subtraction */
384 regw(bc->vert_start_sub, CLSV);
388 static void isif_config_linearization(struct isif_linearize *linearize)
392 if (!linearize->en) {
397 /* shift value for correction & enable linearization (set lsb) */
398 val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
402 val = ((!!linearize->scale_fact.integer) <<
403 ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
404 linearize->scale_fact.decimal;
407 for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
409 regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
411 regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
415 static int isif_config_dfc(struct isif_dfc *vdfc)
417 /* initialize retries to loop for max ~ 250 usec */
418 u32 val, count, retries = loops_per_jiffy / (4000/HZ);
424 /* Correction mode */
425 val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
427 /* Correct whole line or partial */
428 if (vdfc->corr_whole_line)
429 val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
431 /* level shift value */
432 val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
436 /* Defect saturation level */
437 regw(vdfc->def_sat_level, VDFSATLV);
439 regw(vdfc->table[0].pos_vert, DFCMEM0);
440 regw(vdfc->table[0].pos_horz, DFCMEM1);
441 if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
442 vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
443 regw(vdfc->table[0].level_at_pos, DFCMEM2);
444 regw(vdfc->table[0].level_up_pixels, DFCMEM3);
445 regw(vdfc->table[0].level_low_pixels, DFCMEM4);
448 /* set DFCMARST and set DFCMWR */
449 val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
450 regw(val, DFCMEMCTL);
453 while (count && (regr(DFCMEMCTL) & 0x1))
457 dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
461 for (i = 1; i < vdfc->num_vdefects; i++) {
462 regw(vdfc->table[i].pos_vert, DFCMEM0);
463 regw(vdfc->table[i].pos_horz, DFCMEM1);
464 if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
465 vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
466 regw(vdfc->table[i].level_at_pos, DFCMEM2);
467 regw(vdfc->table[i].level_up_pixels, DFCMEM3);
468 regw(vdfc->table[i].level_low_pixels, DFCMEM4);
470 val = regr(DFCMEMCTL);
471 /* clear DFCMARST and set DFCMWR */
472 val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
474 regw(val, DFCMEMCTL);
477 while (count && (regr(DFCMEMCTL) & 0x1))
481 dev_err(isif_cfg.dev,
482 "defect table write timeout !!!\n");
486 if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
487 /* Extra cycle needed */
489 regw(0x1FFF, DFCMEM1);
494 reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
499 static void isif_config_csc(struct isif_df_csc *df_csc)
501 u32 val1 = 0, val2 = 0, i;
503 if (!df_csc->csc.en) {
507 for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
510 val1 = (df_csc->csc.coeff[i].integer <<
511 ISIF_CSC_COEF_INTEG_SHIFT) |
512 df_csc->csc.coeff[i].decimal;
516 val2 = (df_csc->csc.coeff[i].integer <<
517 ISIF_CSC_COEF_INTEG_SHIFT) |
518 df_csc->csc.coeff[i].decimal;
519 val2 <<= ISIF_CSCM_MSB_SHIFT;
521 regw(val2, (CSCM0 + ((i - 1) << 1)));
525 /* program the active area */
526 regw(df_csc->start_pix, FMTSPH);
528 * one extra pixel as required for CSC. Actually number of
529 * pixel - 1 should be configured in this register. So we
530 * need to subtract 1 before writing to FMTSPH, but we will
531 * not do this since csc requires one extra pixel
533 regw(df_csc->num_pixels, FMTLNH);
534 regw(df_csc->start_line, FMTSLV);
536 * one extra line as required for CSC. See reason documented for
539 regw(df_csc->num_lines, FMTLNV);
545 static int isif_config_raw(void)
547 struct isif_params_raw *params = &isif_cfg.bayer;
548 struct isif_config_params_raw *module_params =
549 &isif_cfg.bayer.config_params;
550 struct vpss_pg_frame_size frame_size;
551 struct vpss_sync_pol sync;
554 dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
557 * Configure CCDCFG register:-
558 * Set CCD Not to swap input since input is RAW data
559 * Set FID detection function to Latch at V-Sync
560 * Set WENLOG - isif valid area
563 * Packed to 8 or 16 bits
566 val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
567 ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
568 ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
570 dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
574 * Configure the vertical sync polarity(MODESET.VDPOL)
575 * Configure the horizontal sync polarity (MODESET.HDPOL)
576 * Configure frame id polarity (MODESET.FLDPOL)
577 * Configure data polarity
578 * Configure External WEN Selection
579 * Configure frame format(progressive or interlace)
580 * Configure pixel format (Input mode)
581 * Configure the data shift
584 val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
585 (params->hd_pol << ISIF_HD_POL_SHIFT) |
586 (params->fid_pol << ISIF_FID_POL_SHIFT) |
587 (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
588 (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
589 (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
590 (params->pix_fmt << ISIF_INPUT_SHIFT) |
591 (params->config_params.data_shift << ISIF_DATASFT_SHIFT);
594 dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
597 * Configure GAMMAWD register
598 * CFA pattern setting
600 val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
603 if (module_params->compress.alg == ISIF_ALAW)
604 val |= ISIF_ALAW_ENABLE;
606 val |= (params->data_msb << ISIF_ALAW_GAMA_WD_SHIFT);
609 /* Configure DPCM compression settings */
610 if (module_params->compress.alg == ISIF_DPCM) {
611 val = BIT(ISIF_DPCM_EN_SHIFT) |
612 (module_params->compress.pred <<
613 ISIF_DPCM_PREDICTOR_SHIFT);
618 /* Configure Gain & Offset */
619 isif_config_gain_offset();
621 /* Configure Color pattern */
622 val = (params->config_params.col_pat_field0.olop) |
623 (params->config_params.col_pat_field0.olep << 2) |
624 (params->config_params.col_pat_field0.elop << 4) |
625 (params->config_params.col_pat_field0.elep << 6) |
626 (params->config_params.col_pat_field1.olop << 8) |
627 (params->config_params.col_pat_field1.olep << 10) |
628 (params->config_params.col_pat_field1.elop << 12) |
629 (params->config_params.col_pat_field1.elep << 14);
631 dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
633 /* Configure HSIZE register */
634 val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
636 /* calculate line offset in 32 bytes based on pack value */
637 if (isif_cfg.data_pack == ISIF_PACK_8BIT)
638 val |= ((params->win.width + 31) >> 5);
639 else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
640 val |= (((params->win.width +
641 (params->win.width >> 2)) + 31) >> 5);
643 val |= (((params->win.width * 2) + 31) >> 5);
646 /* Configure SDOFST register */
647 if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
648 if (params->image_invert_en) {
649 /* For interlace inverse mode */
650 regw(0x4B6D, SDOFST);
651 dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
653 /* For interlace non inverse mode */
654 regw(0x0B6D, SDOFST);
655 dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
657 } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
658 if (params->image_invert_en) {
659 /* For progressive inverse mode */
660 regw(0x4000, SDOFST);
661 dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
663 /* For progressive non inverse mode */
664 regw(0x0000, SDOFST);
665 dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
669 /* Configure video window */
670 isif_setwin(¶ms->win, params->frm_fmt, 1);
672 /* Configure Black Clamp */
673 isif_config_bclamp(&module_params->bclamp);
675 /* Configure Vertical Defection Pixel Correction */
676 if (isif_config_dfc(&module_params->dfc) < 0)
679 if (!module_params->df_csc.df_or_csc)
680 /* Configure Color Space Conversion */
681 isif_config_csc(&module_params->df_csc);
683 isif_config_linearization(&module_params->linearize);
685 /* Configure Culling */
686 isif_config_culling(&module_params->culling);
688 /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
689 regw(module_params->horz_offset, DATAHOFST);
690 regw(module_params->vert_offset, DATAVOFST);
692 /* Setup test pattern if enabled */
693 if (params->config_params.test_pat_gen) {
694 /* Use the HD/VD pol settings from user */
695 sync.ccdpg_hdpol = params->hd_pol;
696 sync.ccdpg_vdpol = params->vd_pol;
697 dm365_vpss_set_sync_pol(sync);
698 frame_size.hlpfr = isif_cfg.bayer.win.width;
699 frame_size.pplen = isif_cfg.bayer.win.height;
700 dm365_vpss_set_pg_frame_size(frame_size);
701 vpss_select_ccdc_source(VPSS_PGLPBK);
704 dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
708 static int isif_set_buftype(enum ccdc_buftype buf_type)
710 if (isif_cfg.if_type == VPFE_RAW_BAYER)
711 isif_cfg.bayer.buf_type = buf_type;
713 isif_cfg.ycbcr.buf_type = buf_type;
718 static enum ccdc_buftype isif_get_buftype(void)
720 if (isif_cfg.if_type == VPFE_RAW_BAYER)
721 return isif_cfg.bayer.buf_type;
723 return isif_cfg.ycbcr.buf_type;
726 static int isif_enum_pix(u32 *pix, int i)
730 if (isif_cfg.if_type == VPFE_RAW_BAYER) {
731 if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
732 *pix = isif_raw_bayer_pix_formats[i];
736 if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
737 *pix = isif_raw_yuv_pix_formats[i];
745 static int isif_set_pixel_format(unsigned int pixfmt)
747 if (isif_cfg.if_type == VPFE_RAW_BAYER) {
748 if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
749 if ((isif_cfg.bayer.config_params.compress.alg !=
751 (isif_cfg.bayer.config_params.compress.alg !=
753 dev_dbg(isif_cfg.dev,
754 "Either configure A-Law or DPCM\n");
757 isif_cfg.data_pack = ISIF_PACK_8BIT;
758 } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
759 isif_cfg.bayer.config_params.compress.alg =
761 isif_cfg.data_pack = ISIF_PACK_16BIT;
764 isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
766 if (pixfmt == V4L2_PIX_FMT_YUYV)
767 isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
768 else if (pixfmt == V4L2_PIX_FMT_UYVY)
769 isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
772 isif_cfg.data_pack = ISIF_PACK_8BIT;
777 static u32 isif_get_pixel_format(void)
781 if (isif_cfg.if_type == VPFE_RAW_BAYER)
782 if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
783 isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
784 pixfmt = V4L2_PIX_FMT_SBGGR8;
786 pixfmt = V4L2_PIX_FMT_SBGGR16;
788 if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
789 pixfmt = V4L2_PIX_FMT_YUYV;
791 pixfmt = V4L2_PIX_FMT_UYVY;
796 static int isif_set_image_window(struct v4l2_rect *win)
798 if (isif_cfg.if_type == VPFE_RAW_BAYER) {
799 isif_cfg.bayer.win.top = win->top;
800 isif_cfg.bayer.win.left = win->left;
801 isif_cfg.bayer.win.width = win->width;
802 isif_cfg.bayer.win.height = win->height;
804 isif_cfg.ycbcr.win.top = win->top;
805 isif_cfg.ycbcr.win.left = win->left;
806 isif_cfg.ycbcr.win.width = win->width;
807 isif_cfg.ycbcr.win.height = win->height;
812 static void isif_get_image_window(struct v4l2_rect *win)
814 if (isif_cfg.if_type == VPFE_RAW_BAYER)
815 *win = isif_cfg.bayer.win;
817 *win = isif_cfg.ycbcr.win;
820 static unsigned int isif_get_line_length(void)
824 if (isif_cfg.if_type == VPFE_RAW_BAYER) {
825 if (isif_cfg.data_pack == ISIF_PACK_8BIT)
826 len = ((isif_cfg.bayer.win.width));
827 else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
828 len = (((isif_cfg.bayer.win.width * 2) +
829 (isif_cfg.bayer.win.width >> 2)));
831 len = (((isif_cfg.bayer.win.width * 2)));
833 len = (((isif_cfg.ycbcr.win.width * 2)));
834 return ALIGN(len, 32);
837 static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
839 if (isif_cfg.if_type == VPFE_RAW_BAYER)
840 isif_cfg.bayer.frm_fmt = frm_fmt;
842 isif_cfg.ycbcr.frm_fmt = frm_fmt;
845 static enum ccdc_frmfmt isif_get_frame_format(void)
847 if (isif_cfg.if_type == VPFE_RAW_BAYER)
848 return isif_cfg.bayer.frm_fmt;
849 return isif_cfg.ycbcr.frm_fmt;
852 static int isif_getfid(void)
854 return (regr(MODESET) >> 15) & 0x1;
857 /* misc operations */
858 static void isif_setfbaddr(unsigned long addr)
860 regw((addr >> 21) & 0x07ff, CADU);
861 regw((addr >> 5) & 0x0ffff, CADL);
864 static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
866 isif_cfg.if_type = params->if_type;
868 switch (params->if_type) {
870 case VPFE_BT656_10BIT:
871 case VPFE_YCBCR_SYNC_8:
872 isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
873 isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
876 case VPFE_YCBCR_SYNC_16:
877 isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
878 isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
881 isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
884 dev_dbg(isif_cfg.dev, "Invalid interface type\n");
891 /* This function will configure ISIF for YCbCr parameters. */
892 static int isif_config_ycbcr(void)
894 struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
895 struct vpss_pg_frame_size frame_size;
896 u32 modeset = 0, ccdcfg = 0;
897 struct vpss_sync_pol sync;
899 dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
901 /* configure pixel format or input mode */
902 modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
903 (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
904 (params->fid_pol << ISIF_FID_POL_SHIFT) |
905 (params->hd_pol << ISIF_HD_POL_SHIFT) |
906 (params->vd_pol << ISIF_VD_POL_SHIFT);
908 /* pack the data to 8-bit ISIFCFG */
909 switch (isif_cfg.if_type) {
911 if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
912 dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
915 modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
917 ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
919 case VPFE_BT656_10BIT:
920 if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
921 dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
924 /* setup BT.656, embedded sync */
926 /* enable 10 bit mode in ccdcfg */
927 ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
931 if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
932 dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
938 case VPFE_YCBCR_SYNC_8:
939 ccdcfg |= ISIF_DATA_PACK8;
940 ccdcfg |= ISIF_YCINSWP_YCBCR;
941 if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
942 dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
946 case VPFE_YCBCR_SYNC_16:
947 if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
948 dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
953 /* should never come here */
954 dev_dbg(isif_cfg.dev, "Invalid interface type\n");
958 regw(modeset, MODESET);
960 /* Set up pix order */
961 ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
963 regw(ccdcfg, CCDCFG);
965 /* configure video window */
966 if ((isif_cfg.if_type == VPFE_BT1120) ||
967 (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
968 isif_setwin(¶ms->win, params->frm_fmt, 1);
970 isif_setwin(¶ms->win, params->frm_fmt, 2);
973 * configure the horizontal line offset
974 * this is done by rounding up width to a multiple of 16 pixels
975 * and multiply by two to account for y:cb:cr 4:2:2 data
977 regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
979 /* configure the memory line offset */
980 if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
981 (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
982 /* two fields are interleaved in memory */
983 regw(0x00000249, SDOFST);
985 /* Setup test pattern if enabled */
986 if (isif_cfg.bayer.config_params.test_pat_gen) {
987 sync.ccdpg_hdpol = params->hd_pol;
988 sync.ccdpg_vdpol = params->vd_pol;
989 dm365_vpss_set_sync_pol(sync);
990 dm365_vpss_set_pg_frame_size(frame_size);
995 static int isif_configure(void)
997 if (isif_cfg.if_type == VPFE_RAW_BAYER)
998 return isif_config_raw();
999 return isif_config_ycbcr();
1002 static int isif_close(struct device *device)
1004 /* copy defaults to module params */
1005 isif_cfg.bayer.config_params = isif_config_defaults;
1009 static struct ccdc_hw_device isif_hw_dev = {
1011 .owner = THIS_MODULE,
1014 .close = isif_close,
1015 .enable = isif_enable,
1016 .enable_out_to_sdram = isif_enable_output_to_sdram,
1017 .set_hw_if_params = isif_set_hw_if_params,
1018 .configure = isif_configure,
1019 .set_buftype = isif_set_buftype,
1020 .get_buftype = isif_get_buftype,
1021 .enum_pix = isif_enum_pix,
1022 .set_pixel_format = isif_set_pixel_format,
1023 .get_pixel_format = isif_get_pixel_format,
1024 .set_frame_format = isif_set_frame_format,
1025 .get_frame_format = isif_get_frame_format,
1026 .set_image_window = isif_set_image_window,
1027 .get_image_window = isif_get_image_window,
1028 .get_line_length = isif_get_line_length,
1029 .setfbaddr = isif_setfbaddr,
1030 .getfid = isif_getfid,
1034 static int __init isif_probe(struct platform_device *pdev)
1036 void (*setup_pinmux)(void);
1037 struct resource *res;
1042 * first try to register with vpfe. If not correct platform, then we
1043 * don't have to iomap
1045 status = vpfe_register_ccdc_device(&isif_hw_dev);
1049 /* Get and enable Master clock */
1050 isif_cfg.mclk = clk_get(&pdev->dev, "master");
1051 if (IS_ERR(isif_cfg.mclk)) {
1052 status = PTR_ERR(isif_cfg.mclk);
1055 if (clk_enable(isif_cfg.mclk)) {
1060 /* Platform data holds setup_pinmux function ptr */
1061 if (NULL == pdev->dev.platform_data) {
1065 setup_pinmux = pdev->dev.platform_data;
1067 * setup Mux configuration for ccdc which may be different for
1068 * different SoCs using this CCDC
1073 /* Get the ISIF base address, linearization table0 and table1 addr. */
1075 res = platform_get_resource(pdev, IORESOURCE_MEM, i);
1078 goto fail_nobase_res;
1080 res = request_mem_region(res->start, resource_size(res),
1084 goto fail_nobase_res;
1086 addr = ioremap_nocache(res->start, resource_size(res));
1089 goto fail_base_iomap;
1093 /* ISIF base address */
1094 isif_cfg.base_addr = addr;
1097 /* ISIF linear tbl0 address */
1098 isif_cfg.linear_tbl0_addr = addr;
1101 /* ISIF linear tbl0 address */
1102 isif_cfg.linear_tbl1_addr = addr;
1107 isif_cfg.dev = &pdev->dev;
1109 printk(KERN_NOTICE "%s is registered with vpfe.\n",
1113 release_mem_region(res->start, resource_size(res));
1116 if (isif_cfg.base_addr)
1117 iounmap(isif_cfg.base_addr);
1118 if (isif_cfg.linear_tbl0_addr)
1119 iounmap(isif_cfg.linear_tbl0_addr);
1122 res = platform_get_resource(pdev, IORESOURCE_MEM, i);
1123 release_mem_region(res->start, resource_size(res));
1127 clk_put(isif_cfg.mclk);
1128 vpfe_unregister_ccdc_device(&isif_hw_dev);
1132 static int isif_remove(struct platform_device *pdev)
1134 struct resource *res;
1137 iounmap(isif_cfg.base_addr);
1138 iounmap(isif_cfg.linear_tbl0_addr);
1139 iounmap(isif_cfg.linear_tbl1_addr);
1141 res = platform_get_resource(pdev, IORESOURCE_MEM, i);
1143 release_mem_region(res->start, resource_size(res));
1146 vpfe_unregister_ccdc_device(&isif_hw_dev);
1150 static struct platform_driver isif_driver = {
1153 .owner = THIS_MODULE,
1155 .remove = __devexit_p(isif_remove),
1156 .probe = isif_probe,
1159 static int __init isif_init(void)
1161 return platform_driver_register(&isif_driver);
1164 static void isif_exit(void)
1166 platform_driver_unregister(&isif_driver);
1169 module_init(isif_init);
1170 module_exit(isif_exit);
1172 MODULE_LICENSE("GPL");