drivers/mmc/host/atmel-mci.c

   1 /*
   2  * Atmel MultiMedia Card Interface driver
   3  *
   4  * Copyright (C) 2004-2008 Atmel Corporation
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/blkdev.h>
  11 #include <linux/clk.h>
  12 #include <linux/debugfs.h>
  13 #include <linux/device.h>
  14 #include <linux/dmaengine.h>
  15 #include <linux/dma-mapping.h>
  16 #include <linux/err.h>
  17 #include <linux/gpio.h>
  18 #include <linux/init.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/ioport.h>
  21 #include <linux/module.h>
  22 #include <linux/of.h>
  23 #include <linux/of_device.h>
  24 #include <linux/of_gpio.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/scatterlist.h>
  27 #include <linux/seq_file.h>
  28 #include <linux/slab.h>
  29 #include <linux/stat.h>
  30 #include <linux/types.h>
  31 #include <linux/platform_data/atmel.h>
  32
  33 #include <linux/mmc/host.h>
  34 #include <linux/mmc/sdio.h>
  35
  36 #include <mach/atmel-mci.h>
  37 #include <linux/atmel-mci.h>
  38 #include <linux/atmel_pdc.h>
  39
  40 #include <asm/io.h>
  41 #include <asm/unaligned.h>
  42
  43 #include "atmel-mci-regs.h"
  44
  45 #define ATMCI_DATA_ERROR_FLAGS  (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
  46 #define ATMCI_DMA_THRESHOLD     16
  47
  48 enum {
  49         EVENT_CMD_RDY = 0,
  50         EVENT_XFER_COMPLETE,
  51         EVENT_NOTBUSY,
  52         EVENT_DATA_ERROR,
  53 };
  54
  55 enum atmel_mci_state {
  56         STATE_IDLE = 0,
  57         STATE_SENDING_CMD,
  58         STATE_DATA_XFER,
  59         STATE_WAITING_NOTBUSY,
  60         STATE_SENDING_STOP,
  61         STATE_END_REQUEST,
  62 };
  63
  64 enum atmci_xfer_dir {
  65         XFER_RECEIVE = 0,
  66         XFER_TRANSMIT,
  67 };
  68
  69 enum atmci_pdc_buf {
  70         PDC_FIRST_BUF = 0,
  71         PDC_SECOND_BUF,
  72 };
  73
  74 struct atmel_mci_caps {
  75         bool    has_dma_conf_reg;
  76         bool    has_pdc;
  77         bool    has_cfg_reg;
  78         bool    has_cstor_reg;
  79         bool    has_highspeed;
  80         bool    has_rwproof;
  81         bool    has_odd_clk_div;
  82         bool    has_bad_data_ordering;
  83         bool    need_reset_after_xfer;
  84         bool    need_blksz_mul_4;
  85         bool    need_notbusy_for_read_ops;
  86 };
  87
  88 struct atmel_mci_dma {
  89         struct dma_chan                 *chan;
  90         struct dma_async_tx_descriptor  *data_desc;
  91 };
  92
  93 /**
  94  * struct atmel_mci - MMC controller state shared between all slots
  95  * @lock: Spinlock protecting the queue and associated data.
  96  * @regs: Pointer to MMIO registers.
  97  * @sg: Scatterlist entry currently being processed by PIO or PDC code.
  98  * @pio_offset: Offset into the current scatterlist entry.
  99  * @buffer: Buffer used if we don't have the r/w proof capability. We
 100  *      don't have the time to switch pdc buffers so we have to use only
 101  *      one buffer for the full transaction.
 102  * @buf_size: size of the buffer.
 103  * @phys_buf_addr: buffer address needed for pdc.
 104  * @cur_slot: The slot which is currently using the controller.
 105  * @mrq: The request currently being processed on @cur_slot,
 106  *      or NULL if the controller is idle.
 107  * @cmd: The command currently being sent to the card, or NULL.
 108  * @data: The data currently being transferred, or NULL if no data
 109  *      transfer is in progress.
 110  * @data_size: just data->blocks * data->blksz.
 111  * @dma: DMA client state.
 112  * @data_chan: DMA channel being used for the current data transfer.
 113  * @cmd_status: Snapshot of SR taken upon completion of the current
 114  *      command. Only valid when EVENT_CMD_COMPLETE is pending.
 115  * @data_status: Snapshot of SR taken upon completion of the current
 116  *      data transfer. Only valid when EVENT_DATA_COMPLETE or
 117  *      EVENT_DATA_ERROR is pending.
 118  * @stop_cmdr: Value to be loaded into CMDR when the stop command is
 119  *      to be sent.
 120  * @tasklet: Tasklet running the request state machine.
 121  * @pending_events: Bitmask of events flagged by the interrupt handler
 122  *      to be processed by the tasklet.
 123  * @completed_events: Bitmask of events which the state machine has
 124  *      processed.
 125  * @state: Tasklet state.
 126  * @queue: List of slots waiting for access to the controller.
 127  * @need_clock_update: Update the clock rate before the next request.
 128  * @need_reset: Reset controller before next request.
 129  * @timer: Timer to balance the data timeout error flag which cannot rise.
 130  * @mode_reg: Value of the MR register.
 131  * @cfg_reg: Value of the CFG register.
 132  * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
 133  *      rate and timeout calculations.
 134  * @mapbase: Physical address of the MMIO registers.
 135  * @mck: The peripheral bus clock hooked up to the MMC controller.
 136  * @pdev: Platform device associated with the MMC controller.
 137  * @slot: Slots sharing this MMC controller.
 138  * @caps: MCI capabilities depending on MCI version.
 139  * @prepare_data: function to setup MCI before data transfer which
 140  * depends on MCI capabilities.
 141  * @submit_data: function to start data transfer which depends on MCI
 142  * capabilities.
 143  * @stop_transfer: function to stop data transfer which depends on MCI
 144  * capabilities.
 145  *
 146  * Locking
 147  * =======
 148  *
 149  * @lock is a softirq-safe spinlock protecting @queue as well as
 150  * @cur_slot, @mrq and @state. These must always be updated
 151  * at the same time while holding @lock.
 152  *
 153  * @lock also protects mode_reg and need_clock_update since these are
 154  * used to synchronize mode register updates with the queue
 155  * processing.
 156  *
 157  * The @mrq field of struct atmel_mci_slot is also protected by @lock,
 158  * and must always be written at the same time as the slot is added to
 159  * @queue.
 160  *
 161  * @pending_events and @completed_events are accessed using atomic bit
 162  * operations, so they don't need any locking.
 163  *
 164  * None of the fields touched by the interrupt handler need any
 165  * locking. However, ordering is important: Before EVENT_DATA_ERROR or
 166  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
 167  * interrupts must be disabled and @data_status updated with a
 168  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
 169  * CMDRDY interrupt must be disabled and @cmd_status updated with a
 170  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
 171  * bytes_xfered field of @data must be written. This is ensured by
 172  * using barriers.
 173  */
 174 struct atmel_mci {
 175         spinlock_t              lock;
 176         void __iomem            *regs;
 177
 178         struct scatterlist      *sg;
 179         unsigned int            sg_len;
 180         unsigned int            pio_offset;
 181         unsigned int            *buffer;
 182         unsigned int            buf_size;
 183         dma_addr_t              buf_phys_addr;
 184
 185         struct atmel_mci_slot   *cur_slot;
 186         struct mmc_request      *mrq;
 187         struct mmc_command      *cmd;
 188         struct mmc_data         *data;
 189         unsigned int            data_size;
 190
 191         struct atmel_mci_dma    dma;
 192         struct dma_chan         *data_chan;
 193         struct dma_slave_config dma_conf;
 194
 195         u32                     cmd_status;
 196         u32                     data_status;
 197         u32                     stop_cmdr;
 198
 199         struct tasklet_struct   tasklet;
 200         unsigned long           pending_events;
 201         unsigned long           completed_events;
 202         enum atmel_mci_state    state;
 203         struct list_head        queue;
 204
 205         bool                    need_clock_update;
 206         bool                    need_reset;
 207         struct timer_list       timer;
 208         u32                     mode_reg;
 209         u32                     cfg_reg;
 210         unsigned long           bus_hz;
 211         unsigned long           mapbase;
 212         struct clk              *mck;
 213         struct platform_device  *pdev;
 214
 215         struct atmel_mci_slot   *slot[ATMCI_MAX_NR_SLOTS];
 216
 217         struct atmel_mci_caps   caps;
 218
 219         u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data);
 220         void (*submit_data)(struct atmel_mci *host, struct mmc_data *data);
 221         void (*stop_transfer)(struct atmel_mci *host);
 222 };
 223
 224 /**
 225  * struct atmel_mci_slot - MMC slot state
 226  * @mmc: The mmc_host representing this slot.
 227  * @host: The MMC controller this slot is using.
 228  * @sdc_reg: Value of SDCR to be written before using this slot.
 229  * @sdio_irq: SDIO irq mask for this slot.
 230  * @mrq: mmc_request currently being processed or waiting to be
 231  *      processed, or NULL when the slot is idle.
 232  * @queue_node: List node for placing this node in the @queue list of
 233  *      &struct atmel_mci.
 234  * @clock: Clock rate configured by set_ios(). Protected by host->lock.
 235  * @flags: Random state bits associated with the slot.
 236  * @detect_pin: GPIO pin used for card detection, or negative if not
 237  *      available.
 238  * @wp_pin: GPIO pin used for card write protect sending, or negative
 239  *      if not available.
 240  * @detect_is_active_high: The state of the detect pin when it is active.
 241  * @detect_timer: Timer used for debouncing @detect_pin interrupts.
 242  */
 243 struct atmel_mci_slot {
 244         struct mmc_host         *mmc;
 245         struct atmel_mci        *host;
 246
 247         u32                     sdc_reg;
 248         u32                     sdio_irq;
 249
 250         struct mmc_request      *mrq;
 251         struct list_head        queue_node;
 252
 253         unsigned int            clock;
 254         unsigned long           flags;
 255 #define ATMCI_CARD_PRESENT      0
 256 #define ATMCI_CARD_NEED_INIT    1
 257 #define ATMCI_SHUTDOWN          2
 258
 259         int                     detect_pin;
 260         int                     wp_pin;
 261         bool                    detect_is_active_high;
 262
 263         struct timer_list       detect_timer;
 264 };
 265
 266 #define atmci_test_and_clear_pending(host, event)               \
 267         test_and_clear_bit(event, &host->pending_events)
 268 #define atmci_set_completed(host, event)                        \
 269         set_bit(event, &host->completed_events)
 270 #define atmci_set_pending(host, event)                          \
 271         set_bit(event, &host->pending_events)
 272
 273 /*
 274  * The debugfs stuff below is mostly optimized away when
 275  * CONFIG_DEBUG_FS is not set.
 276  */
 277 static int atmci_req_show(struct seq_file *s, void *v)
 278 {
 279         struct atmel_mci_slot   *slot = s->private;
 280         struct mmc_request      *mrq;
 281         struct mmc_command      *cmd;
 282         struct mmc_command      *stop;
 283         struct mmc_data         *data;
 284
 285         /* Make sure we get a consistent snapshot */
 286         spin_lock_bh(&slot->host->lock);
 287         mrq = slot->mrq;
 288
 289         if (mrq) {
 290                 cmd = mrq->cmd;
 291                 data = mrq->data;
 292                 stop = mrq->stop;
 293
 294                 if (cmd)
 295                         seq_printf(s,
 296                                 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 297                                 cmd->opcode, cmd->arg, cmd->flags,
 298                                 cmd->resp[0], cmd->resp[1], cmd->resp[2],
 299                                 cmd->resp[3], cmd->error);
 300                 if (data)
 301                         seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
 302                                 data->bytes_xfered, data->blocks,
 303                                 data->blksz, data->flags, data->error);
 304                 if (stop)
 305                         seq_printf(s,
 306                                 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
 307                                 stop->opcode, stop->arg, stop->flags,
 308                                 stop->resp[0], stop->resp[1], stop->resp[2],
 309                                 stop->resp[3], stop->error);
 310         }
 311
 312         spin_unlock_bh(&slot->host->lock);
 313
 314         return 0;
 315 }
 316
 317 static int atmci_req_open(struct inode *inode, struct file *file)
 318 {
 319         return single_open(file, atmci_req_show, inode->i_private);
 320 }
 321
 322 static const struct file_operations atmci_req_fops = {
 323         .owner          = THIS_MODULE,
 324         .open           = atmci_req_open,
 325         .read           = seq_read,
 326         .llseek         = seq_lseek,
 327         .release        = single_release,
 328 };
 329
 330 static void atmci_show_status_reg(struct seq_file *s,
 331                 const char *regname, u32 value)
 332 {
 333         static const char       *sr_bit[] = {
 334                 [0]     = "CMDRDY",
 335                 [1]     = "RXRDY",
 336                 [2]     = "TXRDY",
 337                 [3]     = "BLKE",
 338                 [4]     = "DTIP",
 339                 [5]     = "NOTBUSY",
 340                 [6]     = "ENDRX",
 341                 [7]     = "ENDTX",
 342                 [8]     = "SDIOIRQA",
 343                 [9]     = "SDIOIRQB",
 344                 [12]    = "SDIOWAIT",
 345                 [14]    = "RXBUFF",
 346                 [15]    = "TXBUFE",
 347                 [16]    = "RINDE",
 348                 [17]    = "RDIRE",
 349                 [18]    = "RCRCE",
 350                 [19]    = "RENDE",
 351                 [20]    = "RTOE",
 352                 [21]    = "DCRCE",
 353                 [22]    = "DTOE",
 354                 [23]    = "CSTOE",
 355                 [24]    = "BLKOVRE",
 356                 [25]    = "DMADONE",
 357                 [26]    = "FIFOEMPTY",
 358                 [27]    = "XFRDONE",
 359                 [30]    = "OVRE",
 360                 [31]    = "UNRE",
 361         };
 362         unsigned int            i;
 363
 364         seq_printf(s, "%s:\t0x%08x", regname, value);
 365         for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
 366                 if (value & (1 << i)) {
 367                         if (sr_bit[i])
 368                                 seq_printf(s, " %s", sr_bit[i]);
 369                         else
 370                                 seq_puts(s, " UNKNOWN");
 371                 }
 372         }
 373         seq_putc(s, '\n');
 374 }
 375
 376 static int atmci_regs_show(struct seq_file *s, void *v)
 377 {
 378         struct atmel_mci        *host = s->private;
 379         u32                     *buf;
 380         int                     ret = 0;
 381
 382
 383         buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
 384         if (!buf)
 385                 return -ENOMEM;
 386
 387         /*
 388          * Grab a more or less consistent snapshot. Note that we're
 389          * not disabling interrupts, so IMR and SR may not be
 390          * consistent.
 391          */
 392         ret = clk_prepare_enable(host->mck);
 393         if (ret)
 394                 goto out;
 395
 396         spin_lock_bh(&host->lock);
 397         memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
 398         spin_unlock_bh(&host->lock);
 399
 400         clk_disable_unprepare(host->mck);
 401
 402         seq_printf(s, "MR:\t0x%08x%s%s ",
 403                         buf[ATMCI_MR / 4],
 404                         buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
 405                         buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "");
 406         if (host->caps.has_odd_clk_div)
 407                 seq_printf(s, "{CLKDIV,CLKODD}=%u\n",
 408                                 ((buf[ATMCI_MR / 4] & 0xff) << 1)
 409                                 | ((buf[ATMCI_MR / 4] >> 16) & 1));
 410         else
 411                 seq_printf(s, "CLKDIV=%u\n",
 412                                 (buf[ATMCI_MR / 4] & 0xff));
 413         seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
 414         seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
 415         seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
 416         seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
 417                         buf[ATMCI_BLKR / 4],
 418                         buf[ATMCI_BLKR / 4] & 0xffff,
 419                         (buf[ATMCI_BLKR / 4] >> 16) & 0xffff);
 420         if (host->caps.has_cstor_reg)
 421                 seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]);
 422
 423         /* Don't read RSPR and RDR; it will consume the data there */
 424
 425         atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
 426         atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
 427
 428         if (host->caps.has_dma_conf_reg) {
 429                 u32 val;
 430
 431                 val = buf[ATMCI_DMA / 4];
 432                 seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
 433                                 val, val & 3,
 434                                 ((val >> 4) & 3) ?
 435                                         1 << (((val >> 4) & 3) + 1) : 1,
 436                                 val & ATMCI_DMAEN ? " DMAEN" : "");
 437         }
 438         if (host->caps.has_cfg_reg) {
 439                 u32 val;
 440
 441                 val = buf[ATMCI_CFG / 4];
 442                 seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
 443                                 val,
 444                                 val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
 445                                 val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
 446                                 val & ATMCI_CFG_HSMODE ? " HSMODE" : "",
 447                                 val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
 448         }
 449
 450 out:
 451         kfree(buf);
 452
 453         return ret;
 454 }
 455
 456 static int atmci_regs_open(struct inode *inode, struct file *file)
 457 {
 458         return single_open(file, atmci_regs_show, inode->i_private);
 459 }
 460
 461 static const struct file_operations atmci_regs_fops = {
 462         .owner          = THIS_MODULE,
 463         .open           = atmci_regs_open,
 464         .read           = seq_read,
 465         .llseek         = seq_lseek,
 466         .release        = single_release,
 467 };
 468
 469 static void atmci_init_debugfs(struct atmel_mci_slot *slot)
 470 {
 471         struct mmc_host         *mmc = slot->mmc;
 472         struct atmel_mci        *host = slot->host;
 473         struct dentry           *root;
 474         struct dentry           *node;
 475
 476         root = mmc->debugfs_root;
 477         if (!root)
 478                 return;
 479
 480         node = debugfs_create_file("regs", S_IRUSR, root, host,
 481                         &atmci_regs_fops);
 482         if (IS_ERR(node))
 483                 return;
 484         if (!node)
 485                 goto err;
 486
 487         node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
 488         if (!node)
 489                 goto err;
 490
 491         node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
 492         if (!node)
 493                 goto err;
 494
 495         node = debugfs_create_x32("pending_events", S_IRUSR, root,
 496                                      (u32 *)&host->pending_events);
 497         if (!node)
 498                 goto err;
 499
 500         node = debugfs_create_x32("completed_events", S_IRUSR, root,
 501                                      (u32 *)&host->completed_events);
 502         if (!node)
 503                 goto err;
 504
 505         return;
 506
 507 err:
 508         dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
 509 }
 510
 511 #if defined(CONFIG_OF)
 512 static const struct of_device_id atmci_dt_ids[] = {
 513         { .compatible = "atmel,hsmci" },
 514         { /* sentinel */ }
 515 };
 516
 517 MODULE_DEVICE_TABLE(of, atmci_dt_ids);
 518
 519 static struct mci_platform_data*
 520 atmci_of_init(struct platform_device *pdev)
 521 {
 522         struct device_node *np = pdev->dev.of_node;
 523         struct device_node *cnp;
 524         struct mci_platform_data *pdata;
 525         u32 slot_id;
 526
 527         if (!np) {
 528                 dev_err(&pdev->dev, "device node not found\n");
 529                 return ERR_PTR(-EINVAL);
 530         }
 531
 532         pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 533         if (!pdata) {
 534                 dev_err(&pdev->dev, "could not allocate memory for pdata\n");
 535                 return ERR_PTR(-ENOMEM);
 536         }
 537
 538         for_each_child_of_node(np, cnp) {
 539                 if (of_property_read_u32(cnp, "reg", &slot_id)) {
 540                         dev_warn(&pdev->dev, "reg property is missing for %s\n",
 541                                  cnp->full_name);
 542                         continue;
 543                 }
 544
 545                 if (slot_id >= ATMCI_MAX_NR_SLOTS) {
 546                         dev_warn(&pdev->dev, "can't have more than %d slots\n",
 547                                  ATMCI_MAX_NR_SLOTS);
 548                         break;
 549                 }
 550
 551                 if (of_property_read_u32(cnp, "bus-width",
 552                                          &pdata->slot[slot_id].bus_width))
 553                         pdata->slot[slot_id].bus_width = 1;
 554
 555                 pdata->slot[slot_id].detect_pin =
 556                         of_get_named_gpio(cnp, "cd-gpios", 0);
 557
 558                 pdata->slot[slot_id].detect_is_active_high =
 559                         of_property_read_bool(cnp, "cd-inverted");
 560
 561                 pdata->slot[slot_id].wp_pin =
 562                         of_get_named_gpio(cnp, "wp-gpios", 0);
 563         }
 564
 565         return pdata;
 566 }
 567 #else /* CONFIG_OF */
 568 static inline struct mci_platform_data*
 569 atmci_of_init(struct platform_device *dev)
 570 {
 571         return ERR_PTR(-EINVAL);
 572 }
 573 #endif
 574
 575 static inline unsigned int atmci_get_version(struct atmel_mci *host)
 576 {
 577         return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
 578 }
 579
 580 static void atmci_timeout_timer(unsigned long data)
 581 {
 582         struct atmel_mci *host;
 583
 584         host = (struct atmel_mci *)data;
 585
 586         dev_dbg(&host->pdev->dev, "software timeout\n");
 587
 588         if (host->mrq->cmd->data) {
 589                 host->mrq->cmd->data->error = -ETIMEDOUT;
 590                 host->data = NULL;
 591                 /*
 592                  * With some SDIO modules, sometimes DMA transfer hangs. If
 593                  * stop_transfer() is not called then the DMA request is not
 594                  * removed, following ones are queued and never computed.
 595                  */
 596                 if (host->state == STATE_DATA_XFER)
 597                         host->stop_transfer(host);
 598         } else {
 599                 host->mrq->cmd->error = -ETIMEDOUT;
 600                 host->cmd = NULL;
 601         }
 602         host->need_reset = 1;
 603         host->state = STATE_END_REQUEST;
 604         smp_wmb();
 605         tasklet_schedule(&host->tasklet);
 606 }
 607
 608 static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host,
 609                                         unsigned int ns)
 610 {
 611         /*
 612          * It is easier here to use us instead of ns for the timeout,
 613          * it prevents from overflows during calculation.
 614          */
 615         unsigned int us = DIV_ROUND_UP(ns, 1000);
 616
 617         /* Maximum clock frequency is host->bus_hz/2 */
 618         return us * (DIV_ROUND_UP(host->bus_hz, 2000000));
 619 }
 620
 621 static void atmci_set_timeout(struct atmel_mci *host,
 622                 struct atmel_mci_slot *slot, struct mmc_data *data)
 623 {
 624         static unsigned dtomul_to_shift[] = {
 625                 0, 4, 7, 8, 10, 12, 16, 20
 626         };
 627         unsigned        timeout;
 628         unsigned        dtocyc;
 629         unsigned        dtomul;
 630
 631         timeout = atmci_ns_to_clocks(host, data->timeout_ns)
 632                 + data->timeout_clks;
 633
 634         for (dtomul = 0; dtomul < 8; dtomul++) {
 635                 unsigned shift = dtomul_to_shift[dtomul];
 636                 dtocyc = (timeout + (1 << shift) - 1) >> shift;
 637                 if (dtocyc < 15)
 638                         break;
 639         }
 640
 641         if (dtomul >= 8) {
 642                 dtomul = 7;
 643                 dtocyc = 15;
 644         }
 645
 646         dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
 647                         dtocyc << dtomul_to_shift[dtomul]);
 648         atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
 649 }
 650
 651 /*
 652  * Return mask with command flags to be enabled for this command.
 653  */
 654 static u32 atmci_prepare_command(struct mmc_host *mmc,
 655                                  struct mmc_command *cmd)
 656 {
 657         struct mmc_data *data;
 658         u32             cmdr;
 659
 660         cmd->error = -EINPROGRESS;
 661
 662         cmdr = ATMCI_CMDR_CMDNB(cmd->opcode);
 663
 664         if (cmd->flags & MMC_RSP_PRESENT) {
 665                 if (cmd->flags & MMC_RSP_136)
 666                         cmdr |= ATMCI_CMDR_RSPTYP_136BIT;
 667                 else
 668                         cmdr |= ATMCI_CMDR_RSPTYP_48BIT;
 669         }
 670
 671         /*
 672          * This should really be MAXLAT_5 for CMD2 and ACMD41, but
 673          * it's too difficult to determine whether this is an ACMD or
 674          * not. Better make it 64.
 675          */
 676         cmdr |= ATMCI_CMDR_MAXLAT_64CYC;
 677
 678         if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
 679                 cmdr |= ATMCI_CMDR_OPDCMD;
 680
 681         data = cmd->data;
 682         if (data) {
 683                 cmdr |= ATMCI_CMDR_START_XFER;
 684
 685                 if (cmd->opcode == SD_IO_RW_EXTENDED) {
 686                         cmdr |= ATMCI_CMDR_SDIO_BLOCK;
 687                 } else {
 688                         if (data->flags & MMC_DATA_STREAM)
 689                                 cmdr |= ATMCI_CMDR_STREAM;
 690                         else if (data->blocks > 1)
 691                                 cmdr |= ATMCI_CMDR_MULTI_BLOCK;
 692                         else
 693                                 cmdr |= ATMCI_CMDR_BLOCK;
 694                 }
 695
 696                 if (data->flags & MMC_DATA_READ)
 697                         cmdr |= ATMCI_CMDR_TRDIR_READ;
 698         }
 699
 700         return cmdr;
 701 }
 702
 703 static void atmci_send_command(struct atmel_mci *host,
 704                 struct mmc_command *cmd, u32 cmd_flags)
 705 {
 706         WARN_ON(host->cmd);
 707         host->cmd = cmd;
 708
 709         dev_vdbg(&host->pdev->dev,
 710                         "start command: ARGR=0x%08x CMDR=0x%08x\n",
 711                         cmd->arg, cmd_flags);
 712
 713         atmci_writel(host, ATMCI_ARGR, cmd->arg);
 714         atmci_writel(host, ATMCI_CMDR, cmd_flags);
 715 }
 716
 717 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
 718 {
 719         dev_dbg(&host->pdev->dev, "send stop command\n");
 720         atmci_send_command(host, data->stop, host->stop_cmdr);
 721         atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
 722 }
 723
 724 /*
 725  * Configure given PDC buffer taking care of alignement issues.
 726  * Update host->data_size and host->sg.
 727  */
 728 static void atmci_pdc_set_single_buf(struct atmel_mci *host,
 729         enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb)
 730 {
 731         u32 pointer_reg, counter_reg;
 732         unsigned int buf_size;
 733
 734         if (dir == XFER_RECEIVE) {
 735                 pointer_reg = ATMEL_PDC_RPR;
 736                 counter_reg = ATMEL_PDC_RCR;
 737         } else {
 738                 pointer_reg = ATMEL_PDC_TPR;
 739                 counter_reg = ATMEL_PDC_TCR;
 740         }
 741
 742         if (buf_nb == PDC_SECOND_BUF) {
 743                 pointer_reg += ATMEL_PDC_SCND_BUF_OFF;
 744                 counter_reg += ATMEL_PDC_SCND_BUF_OFF;
 745         }
 746
 747         if (!host->caps.has_rwproof) {
 748                 buf_size = host->buf_size;
 749                 atmci_writel(host, pointer_reg, host->buf_phys_addr);
 750         } else {
 751                 buf_size = sg_dma_len(host->sg);
 752                 atmci_writel(host, pointer_reg, sg_dma_address(host->sg));
 753         }
 754
 755         if (host->data_size <= buf_size) {
 756                 if (host->data_size & 0x3) {
 757                         /* If size is different from modulo 4, transfer bytes */
 758                         atmci_writel(host, counter_reg, host->data_size);
 759                         atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE);
 760                 } else {
 761                         /* Else transfer 32-bits words */
 762                         atmci_writel(host, counter_reg, host->data_size / 4);
 763                 }
 764                 host->data_size = 0;
 765         } else {
 766                 /* We assume the size of a page is 32-bits aligned */
 767                 atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4);
 768                 host->data_size -= sg_dma_len(host->sg);
 769                 if (host->data_size)
 770                         host->sg = sg_next(host->sg);
 771         }
 772 }
 773
 774 /*
 775  * Configure PDC buffer according to the data size ie configuring one or two
 776  * buffers. Don't use this function if you want to configure only the second
 777  * buffer. In this case, use atmci_pdc_set_single_buf.
 778  */
 779 static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir)
 780 {
 781         atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF);
 782         if (host->data_size)
 783                 atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF);
 784 }
 785
 786 /*
 787  * Unmap sg lists, called when transfer is finished.
 788  */
 789 static void atmci_pdc_cleanup(struct atmel_mci *host)
 790 {
 791         struct mmc_data         *data = host->data;
 792
 793         if (data)
 794                 dma_unmap_sg(&host->pdev->dev,
 795                                 data->sg, data->sg_len,
 796                                 ((data->flags & MMC_DATA_WRITE)
 797                                  ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
 798 }
 799
 800 /*
 801  * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after
 802  * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY
 803  * interrupt needed for both transfer directions.
 804  */
 805 static void atmci_pdc_complete(struct atmel_mci *host)
 806 {
 807         int transfer_size = host->data->blocks * host->data->blksz;
 808         int i;
 809
 810         atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 811
 812         if ((!host->caps.has_rwproof)
 813             && (host->data->flags & MMC_DATA_READ)) {
 814                 if (host->caps.has_bad_data_ordering)
 815                         for (i = 0; i < transfer_size; i++)
 816                                 host->buffer[i] = swab32(host->buffer[i]);
 817                 sg_copy_from_buffer(host->data->sg, host->data->sg_len,
 818                                     host->buffer, transfer_size);
 819         }
 820
 821         atmci_pdc_cleanup(host);
 822
 823         dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__);
 824         atmci_set_pending(host, EVENT_XFER_COMPLETE);
 825         tasklet_schedule(&host->tasklet);
 826 }
 827
 828 static void atmci_dma_cleanup(struct atmel_mci *host)
 829 {
 830         struct mmc_data                 *data = host->data;
 831
 832         if (data)
 833                 dma_unmap_sg(host->dma.chan->device->dev,
 834                                 data->sg, data->sg_len,
 835                                 ((data->flags & MMC_DATA_WRITE)
 836                                  ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
 837 }
 838
 839 /*
 840  * This function is called by the DMA driver from tasklet context.
 841  */
 842 static void atmci_dma_complete(void *arg)
 843 {
 844         struct atmel_mci        *host = arg;
 845         struct mmc_data         *data = host->data;
 846
 847         dev_vdbg(&host->pdev->dev, "DMA complete\n");
 848
 849         if (host->caps.has_dma_conf_reg)
 850                 /* Disable DMA hardware handshaking on MCI */
 851                 atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
 852
 853         atmci_dma_cleanup(host);
 854
 855         /*
 856          * If the card was removed, data will be NULL. No point trying
 857          * to send the stop command or waiting for NBUSY in this case.
 858          */
 859         if (data) {
 860                 dev_dbg(&host->pdev->dev,
 861                         "(%s) set pending xfer complete\n", __func__);
 862                 atmci_set_pending(host, EVENT_XFER_COMPLETE);
 863                 tasklet_schedule(&host->tasklet);
 864
 865                 /*
 866                  * Regardless of what the documentation says, we have
 867                  * to wait for NOTBUSY even after block read
 868                  * operations.
 869                  *
 870                  * When the DMA transfer is complete, the controller
 871                  * may still be reading the CRC from the card, i.e.
 872                  * the data transfer is still in progress and we
 873                  * haven't seen all the potential error bits yet.
 874                  *
 875                  * The interrupt handler will schedule a different
 876                  * tasklet to finish things up when the data transfer
 877                  * is completely done.
 878                  *
 879                  * We may not complete the mmc request here anyway
 880                  * because the mmc layer may call back and cause us to
 881                  * violate the "don't submit new operations from the
 882                  * completion callback" rule of the dma engine
 883                  * framework.
 884                  */
 885                 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 886         }
 887 }
 888
 889 /*
 890  * Returns a mask of interrupt flags to be enabled after the whole
 891  * request has been prepared.
 892  */
 893 static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
 894 {
 895         u32 iflags;
 896
 897         data->error = -EINPROGRESS;
 898
 899         host->sg = data->sg;
 900         host->sg_len = data->sg_len;
 901         host->data = data;
 902         host->data_chan = NULL;
 903
 904         iflags = ATMCI_DATA_ERROR_FLAGS;
 905
 906         /*
 907          * Errata: MMC data write operation with less than 12
 908          * bytes is impossible.
 909          *
 910          * Errata: MCI Transmit Data Register (TDR) FIFO
 911          * corruption when length is not multiple of 4.
 912          */
 913         if (data->blocks * data->blksz < 12
 914                         || (data->blocks * data->blksz) & 3)
 915                 host->need_reset = true;
 916
 917         host->pio_offset = 0;
 918         if (data->flags & MMC_DATA_READ)
 919                 iflags |= ATMCI_RXRDY;
 920         else
 921                 iflags |= ATMCI_TXRDY;
 922
 923         return iflags;
 924 }
 925
 926 /*
 927  * Set interrupt flags and set block length into the MCI mode register even
 928  * if this value is also accessible in the MCI block register. It seems to be
 929  * necessary before the High Speed MCI version. It also map sg and configure
 930  * PDC registers.
 931  */
 932 static u32
 933 atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
 934 {
 935         u32 iflags, tmp;
 936         unsigned int sg_len;
 937         enum dma_data_direction dir;
 938         int i;
 939
 940         data->error = -EINPROGRESS;
 941
 942         host->data = data;
 943         host->sg = data->sg;
 944         iflags = ATMCI_DATA_ERROR_FLAGS;
 945
 946         /* Enable pdc mode */
 947         atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE);
 948
 949         if (data->flags & MMC_DATA_READ) {
 950                 dir = DMA_FROM_DEVICE;
 951                 iflags |= ATMCI_ENDRX | ATMCI_RXBUFF;
 952         } else {
 953                 dir = DMA_TO_DEVICE;
 954                 iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE;
 955         }
 956
 957         /* Set BLKLEN */
 958         tmp = atmci_readl(host, ATMCI_MR);
 959         tmp &= 0x0000ffff;
 960         tmp |= ATMCI_BLKLEN(data->blksz);
 961         atmci_writel(host, ATMCI_MR, tmp);
 962
 963         /* Configure PDC */
 964         host->data_size = data->blocks * data->blksz;
 965         sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir);
 966
 967         if ((!host->caps.has_rwproof)
 968             && (host->data->flags & MMC_DATA_WRITE)) {
 969                 sg_copy_to_buffer(host->data->sg, host->data->sg_len,
 970                                   host->buffer, host->data_size);
 971                 if (host->caps.has_bad_data_ordering)
 972                         for (i = 0; i < host->data_size; i++)
 973                                 host->buffer[i] = swab32(host->buffer[i]);
 974         }
 975
 976         if (host->data_size)
 977                 atmci_pdc_set_both_buf(host,
 978                         ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT));
 979
 980         return iflags;
 981 }
 982
 983 static u32
 984 atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
 985 {
 986         struct dma_chan                 *chan;
 987         struct dma_async_tx_descriptor  *desc;
 988         struct scatterlist              *sg;
 989         unsigned int                    i;
 990         enum dma_data_direction         direction;
 991         enum dma_transfer_direction     slave_dirn;
 992         unsigned int                    sglen;
 993         u32                             maxburst;
 994         u32 iflags;
 995
 996         data->error = -EINPROGRESS;
 997
 998         WARN_ON(host->data);
 999         host->sg = NULL;
1000         host->data = data;
1001
1002         iflags = ATMCI_DATA_ERROR_FLAGS;
1003
1004         /*
1005          * We don't do DMA on "complex" transfers, i.e. with
1006          * non-word-aligned buffers or lengths. Also, we don't bother
1007          * with all the DMA setup overhead for short transfers.
1008          */
1009         if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
1010                 return atmci_prepare_data(host, data);
1011         if (data->blksz & 3)
1012                 return atmci_prepare_data(host, data);
1013
1014         for_each_sg(data->sg, sg, data->sg_len, i) {
1015                 if (sg->offset & 3 || sg->length & 3)
1016                         return atmci_prepare_data(host, data);
1017         }
1018
1019         /* If we don't have a channel, we can't do DMA */
1020         chan = host->dma.chan;
1021         if (chan)
1022                 host->data_chan = chan;
1023
1024         if (!chan)
1025                 return -ENODEV;
1026
1027         if (data->flags & MMC_DATA_READ) {
1028                 direction = DMA_FROM_DEVICE;
1029                 host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
1030                 maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
1031         } else {
1032                 direction = DMA_TO_DEVICE;
1033                 host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
1034                 maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
1035         }
1036
1037         if (host->caps.has_dma_conf_reg)
1038                 atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) |
1039                         ATMCI_DMAEN);
1040
1041         sglen = dma_map_sg(chan->device->dev, data->sg,
1042                         data->sg_len, direction);
1043
1044         dmaengine_slave_config(chan, &host->dma_conf);
1045         desc = dmaengine_prep_slave_sg(chan,
1046                         data->sg, sglen, slave_dirn,
1047                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1048         if (!desc)
1049                 goto unmap_exit;
1050
1051         host->dma.data_desc = desc;
1052         desc->callback = atmci_dma_complete;
1053         desc->callback_param = host;
1054
1055         return iflags;
1056 unmap_exit:
1057         dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction);
1058         return -ENOMEM;
1059 }
1060
1061 static void
1062 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
1063 {
1064         return;
1065 }
1066
1067 /*
1068  * Start PDC according to transfer direction.
1069  */
1070 static void
1071 atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data)
1072 {
1073         if (data->flags & MMC_DATA_READ)
1074                 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
1075         else
1076                 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
1077 }
1078
1079 static void
1080 atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
1081 {
1082         struct dma_chan                 *chan = host->data_chan;
1083         struct dma_async_tx_descriptor  *desc = host->dma.data_desc;
1084
1085         if (chan) {
1086                 dmaengine_submit(desc);
1087                 dma_async_issue_pending(chan);
1088         }
1089 }
1090
1091 static void atmci_stop_transfer(struct atmel_mci *host)
1092 {
1093         dev_dbg(&host->pdev->dev,
1094                 "(%s) set pending xfer complete\n", __func__);
1095         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1096         atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1097 }
1098
1099 /*
1100  * Stop data transfer because error(s) occurred.
1101  */
1102 static void atmci_stop_transfer_pdc(struct atmel_mci *host)
1103 {
1104         atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
1105 }
1106
1107 static void atmci_stop_transfer_dma(struct atmel_mci *host)
1108 {
1109         struct dma_chan *chan = host->data_chan;
1110
1111         if (chan) {
1112                 dmaengine_terminate_all(chan);
1113                 atmci_dma_cleanup(host);
1114         } else {
1115                 /* Data transfer was stopped by the interrupt handler */
1116                 dev_dbg(&host->pdev->dev,
1117                         "(%s) set pending xfer complete\n", __func__);
1118                 atmci_set_pending(host, EVENT_XFER_COMPLETE);
1119                 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1120         }
1121 }
1122
1123 /*
1124  * Start a request: prepare data if needed, prepare the command and activate
1125  * interrupts.
1126  */
1127 static void atmci_start_request(struct atmel_mci *host,
1128                 struct atmel_mci_slot *slot)
1129 {
1130         struct mmc_request      *mrq;
1131         struct mmc_command      *cmd;
1132         struct mmc_data         *data;
1133         u32                     iflags;
1134         u32                     cmdflags;
1135
1136         mrq = slot->mrq;
1137         host->cur_slot = slot;
1138         host->mrq = mrq;
1139
1140         host->pending_events = 0;
1141         host->completed_events = 0;
1142         host->cmd_status = 0;
1143         host->data_status = 0;
1144
1145         dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode);
1146
1147         if (host->need_reset || host->caps.need_reset_after_xfer) {
1148                 iflags = atmci_readl(host, ATMCI_IMR);
1149                 iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
1150                 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
1151                 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
1152                 atmci_writel(host, ATMCI_MR, host->mode_reg);
1153                 if (host->caps.has_cfg_reg)
1154                         atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1155                 atmci_writel(host, ATMCI_IER, iflags);
1156                 host->need_reset = false;
1157         }
1158         atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
1159
1160         iflags = atmci_readl(host, ATMCI_IMR);
1161         if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
1162                 dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
1163                                 iflags);
1164
1165         if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
1166                 /* Send init sequence (74 clock cycles) */
1167                 atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT);
1168                 while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY))
1169                         cpu_relax();
1170         }
1171         iflags = 0;
1172         data = mrq->data;
1173         if (data) {
1174                 atmci_set_timeout(host, slot, data);
1175
1176                 /* Must set block count/size before sending command */
1177                 atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks)
1178                                 | ATMCI_BLKLEN(data->blksz));
1179                 dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
1180                         ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz));
1181
1182                 iflags |= host->prepare_data(host, data);
1183         }
1184
1185         iflags |= ATMCI_CMDRDY;
1186         cmd = mrq->cmd;
1187         cmdflags = atmci_prepare_command(slot->mmc, cmd);
1188
1189         /*
1190          * DMA transfer should be started before sending the command to avoid
1191          * unexpected errors especially for read operations in SDIO mode.
1192          * Unfortunately, in PDC mode, command has to be sent before starting
1193          * the transfer.
1194          */
1195         if (host->submit_data != &atmci_submit_data_dma)
1196                 atmci_send_command(host, cmd, cmdflags);
1197
1198         if (data)
1199                 host->submit_data(host, data);
1200
1201         if (host->submit_data == &atmci_submit_data_dma)
1202                 atmci_send_command(host, cmd, cmdflags);
1203
1204         if (mrq->stop) {
1205                 host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
1206                 host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
1207                 if (!(data->flags & MMC_DATA_WRITE))
1208                         host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ;
1209                 if (data->flags & MMC_DATA_STREAM)
1210                         host->stop_cmdr |= ATMCI_CMDR_STREAM;
1211                 else
1212                         host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK;
1213         }
1214
1215         /*
1216          * We could have enabled interrupts earlier, but I suspect
1217          * that would open up a nice can of interesting race
1218          * conditions (e.g. command and data complete, but stop not
1219          * prepared yet.)
1220          */
1221         atmci_writel(host, ATMCI_IER, iflags);
1222
1223         mod_timer(&host->timer, jiffies +  msecs_to_jiffies(2000));
1224 }
1225
1226 static void atmci_queue_request(struct atmel_mci *host,
1227                 struct atmel_mci_slot *slot, struct mmc_request *mrq)
1228 {
1229         dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
1230                         host->state);
1231
1232         spin_lock_bh(&host->lock);
1233         slot->mrq = mrq;
1234         if (host->state == STATE_IDLE) {
1235                 host->state = STATE_SENDING_CMD;
1236                 atmci_start_request(host, slot);
1237         } else {
1238                 dev_dbg(&host->pdev->dev, "queue request\n");
1239                 list_add_tail(&slot->queue_node, &host->queue);
1240         }
1241         spin_unlock_bh(&host->lock);
1242 }
1243
1244 static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1245 {
1246         struct atmel_mci_slot   *slot = mmc_priv(mmc);
1247         struct atmel_mci        *host = slot->host;
1248         struct mmc_data         *data;
1249
1250         WARN_ON(slot->mrq);
1251         dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
1252
1253         /*
1254          * We may "know" the card is gone even though there's still an
1255          * electrical connection. If so, we really need to communicate
1256          * this to the MMC core since there won't be any more
1257          * interrupts as the card is completely removed. Otherwise,
1258          * the MMC core might believe the card is still there even
1259          * though the card was just removed very slowly.
1260          */
1261         if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
1262                 mrq->cmd->error = -ENOMEDIUM;
1263                 mmc_request_done(mmc, mrq);
1264                 return;
1265         }
1266
1267         /* We don't support multiple blocks of weird lengths. */
1268         data = mrq->data;
1269         if (data && data->blocks > 1 && data->blksz & 3) {
1270                 mrq->cmd->error = -EINVAL;
1271                 mmc_request_done(mmc, mrq);
1272         }
1273
1274         atmci_queue_request(host, slot, mrq);
1275 }
1276
1277 static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1278 {
1279         struct atmel_mci_slot   *slot = mmc_priv(mmc);
1280         struct atmel_mci        *host = slot->host;
1281         unsigned int            i;
1282         bool                    unprepare_clk;
1283
1284         slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
1285         switch (ios->bus_width) {
1286         case MMC_BUS_WIDTH_1:
1287                 slot->sdc_reg |= ATMCI_SDCBUS_1BIT;
1288                 break;
1289         case MMC_BUS_WIDTH_4:
1290                 slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
1291                 break;
1292         }
1293
1294         if (ios->clock) {
1295                 unsigned int clock_min = ~0U;
1296                 u32 clkdiv;
1297
1298                 clk_prepare(host->mck);
1299                 unprepare_clk = true;
1300
1301                 spin_lock_bh(&host->lock);
1302                 if (!host->mode_reg) {
1303                         clk_enable(host->mck);
1304                         unprepare_clk = false;
1305                         atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
1306                         atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
1307                         if (host->caps.has_cfg_reg)
1308                                 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1309                 }
1310
1311                 /*
1312                  * Use mirror of ios->clock to prevent race with mmc
1313                  * core ios update when finding the minimum.
1314                  */
1315                 slot->clock = ios->clock;
1316                 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
1317                         if (host->slot[i] && host->slot[i]->clock
1318                                         && host->slot[i]->clock < clock_min)
1319                                 clock_min = host->slot[i]->clock;
1320                 }
1321
1322                 /* Calculate clock divider */
1323                 if (host->caps.has_odd_clk_div) {
1324                         clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
1325                         if (clkdiv > 511) {
1326                                 dev_warn(&mmc->class_dev,
1327                                          "clock %u too slow; using %lu\n",
1328                                          clock_min, host->bus_hz / (511 + 2));
1329                                 clkdiv = 511;
1330                         }
1331                         host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
1332                                          | ATMCI_MR_CLKODD(clkdiv & 1);
1333                 } else {
1334                         clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
1335                         if (clkdiv > 255) {
1336                                 dev_warn(&mmc->class_dev,
1337                                          "clock %u too slow; using %lu\n",
1338                                          clock_min, host->bus_hz / (2 * 256));
1339                                 clkdiv = 255;
1340                         }
1341                         host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
1342                 }
1343
1344                 /*
1345                  * WRPROOF and RDPROOF prevent overruns/underruns by
1346                  * stopping the clock when the FIFO is full/empty.
1347                  * This state is not expected to last for long.
1348                  */
1349                 if (host->caps.has_rwproof)
1350                         host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF);
1351
1352                 if (host->caps.has_cfg_reg) {
1353                         /* setup High Speed mode in relation with card capacity */
1354                         if (ios->timing == MMC_TIMING_SD_HS)
1355                                 host->cfg_reg |= ATMCI_CFG_HSMODE;
1356                         else
1357                                 host->cfg_reg &= ~ATMCI_CFG_HSMODE;
1358                 }
1359
1360                 if (list_empty(&host->queue)) {
1361                         atmci_writel(host, ATMCI_MR, host->mode_reg);
1362                         if (host->caps.has_cfg_reg)
1363                                 atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1364                 } else {
1365                         host->need_clock_update = true;
1366                 }
1367
1368                 spin_unlock_bh(&host->lock);
1369         } else {
1370                 bool any_slot_active = false;
1371
1372                 unprepare_clk = false;
1373
1374                 spin_lock_bh(&host->lock);
1375                 slot->clock = 0;
1376                 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
1377                         if (host->slot[i] && host->slot[i]->clock) {
1378                                 any_slot_active = true;
1379                                 break;
1380                         }
1381                 }
1382                 if (!any_slot_active) {
1383                         atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
1384                         if (host->mode_reg) {
1385                                 atmci_readl(host, ATMCI_MR);
1386                                 clk_disable(host->mck);
1387                                 unprepare_clk = true;
1388                         }
1389                         host->mode_reg = 0;
1390                 }
1391                 spin_unlock_bh(&host->lock);
1392         }
1393
1394         if (unprepare_clk)
1395                 clk_unprepare(host->mck);
1396
1397         switch (ios->power_mode) {
1398         case MMC_POWER_OFF:
1399                 if (!IS_ERR(mmc->supply.vmmc))
1400                         mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
1401                 break;
1402         case MMC_POWER_UP:
1403                 set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
1404                 if (!IS_ERR(mmc->supply.vmmc))
1405                         mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
1406                 break;
1407         default:
1408                 /*
1409                  * TODO: None of the currently available AVR32-based
1410                  * boards allow MMC power to be turned off. Implement
1411                  * power control when this can be tested properly.
1412                  *
1413                  * We also need to hook this into the clock management
1414                  * somehow so that newly inserted cards aren't
1415                  * subjected to a fast clock before we have a chance
1416                  * to figure out what the maximum rate is. Currently,
1417                  * there's no way to avoid this, and there never will
1418                  * be for boards that don't support power control.
1419                  */
1420                 break;
1421         }
1422 }
1423
1424 static int atmci_get_ro(struct mmc_host *mmc)
1425 {
1426         int                     read_only = -ENOSYS;
1427         struct atmel_mci_slot   *slot = mmc_priv(mmc);
1428
1429         if (gpio_is_valid(slot->wp_pin)) {
1430                 read_only = gpio_get_value(slot->wp_pin);
1431                 dev_dbg(&mmc->class_dev, "card is %s\n",
1432                                 read_only ? "read-only" : "read-write");
1433         }
1434
1435         return read_only;
1436 }
1437
1438 static int atmci_get_cd(struct mmc_host *mmc)
1439 {
1440         int                     present = -ENOSYS;
1441         struct atmel_mci_slot   *slot = mmc_priv(mmc);
1442
1443         if (gpio_is_valid(slot->detect_pin)) {
1444                 present = !(gpio_get_value(slot->detect_pin) ^
1445                             slot->detect_is_active_high);
1446                 dev_dbg(&mmc->class_dev, "card is %spresent\n",
1447                                 present ? "" : "not ");
1448         }
1449
1450         return present;
1451 }
1452
1453 static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1454 {
1455         struct atmel_mci_slot   *slot = mmc_priv(mmc);
1456         struct atmel_mci        *host = slot->host;
1457
1458         if (enable)
1459                 atmci_writel(host, ATMCI_IER, slot->sdio_irq);
1460         else
1461                 atmci_writel(host, ATMCI_IDR, slot->sdio_irq);
1462 }
1463
1464 static const struct mmc_host_ops atmci_ops = {
1465         .request        = atmci_request,
1466         .set_ios        = atmci_set_ios,
1467         .get_ro         = atmci_get_ro,
1468         .get_cd         = atmci_get_cd,
1469         .enable_sdio_irq = atmci_enable_sdio_irq,
1470 };
1471
1472 /* Called with host->lock held */
1473 static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
1474         __releases(&host->lock)
1475         __acquires(&host->lock)
1476 {
1477         struct atmel_mci_slot   *slot = NULL;
1478         struct mmc_host         *prev_mmc = host->cur_slot->mmc;
1479
1480         WARN_ON(host->cmd || host->data);
1481
1482         /*
1483          * Update the MMC clock rate if necessary. This may be
1484          * necessary if set_ios() is called when a different slot is
1485          * busy transferring data.
1486          */
1487         if (host->need_clock_update) {
1488                 atmci_writel(host, ATMCI_MR, host->mode_reg);
1489                 if (host->caps.has_cfg_reg)
1490                         atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1491         }
1492
1493         host->cur_slot->mrq = NULL;
1494         host->mrq = NULL;
1495         if (!list_empty(&host->queue)) {
1496                 slot = list_entry(host->queue.next,
1497                                 struct atmel_mci_slot, queue_node);
1498                 list_del(&slot->queue_node);
1499                 dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
1500                                 mmc_hostname(slot->mmc));
1501                 host->state = STATE_SENDING_CMD;
1502                 atmci_start_request(host, slot);
1503         } else {
1504                 dev_vdbg(&host->pdev->dev, "list empty\n");
1505                 host->state = STATE_IDLE;
1506         }
1507
1508         del_timer(&host->timer);
1509
1510         spin_unlock(&host->lock);
1511         mmc_request_done(prev_mmc, mrq);
1512         spin_lock(&host->lock);
1513 }
1514
1515 static void atmci_command_complete(struct atmel_mci *host,
1516                         struct mmc_command *cmd)
1517 {
1518         u32             status = host->cmd_status;
1519
1520         /* Read the response from the card (up to 16 bytes) */
1521         cmd->resp[0] = atmci_readl(host, ATMCI_RSPR);
1522         cmd->resp[1] = atmci_readl(host, ATMCI_RSPR);
1523         cmd->resp[2] = atmci_readl(host, ATMCI_RSPR);
1524         cmd->resp[3] = atmci_readl(host, ATMCI_RSPR);
1525
1526         if (status & ATMCI_RTOE)
1527                 cmd->error = -ETIMEDOUT;
1528         else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE))
1529                 cmd->error = -EILSEQ;
1530         else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE))
1531                 cmd->error = -EIO;
1532         else if (host->mrq->data && (host->mrq->data->blksz & 3)) {
1533                 if (host->caps.need_blksz_mul_4) {
1534                         cmd->error = -EINVAL;
1535                         host->need_reset = 1;
1536                 }
1537         } else
1538                 cmd->error = 0;
1539 }
1540
1541 static void atmci_detect_change(unsigned long data)
1542 {
1543         struct atmel_mci_slot   *slot = (struct atmel_mci_slot *)data;
1544         bool                    present;
1545         bool                    present_old;
1546
1547         /*
1548          * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
1549          * freeing the interrupt. We must not re-enable the interrupt
1550          * if it has been freed, and if we're shutting down, it
1551          * doesn't really matter whether the card is present or not.
1552          */
1553         smp_rmb();
1554         if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
1555                 return;
1556
1557         enable_irq(gpio_to_irq(slot->detect_pin));
1558         present = !(gpio_get_value(slot->detect_pin) ^
1559                     slot->detect_is_active_high);
1560         present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
1561
1562         dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
1563                         present, present_old);
1564
1565         if (present != present_old) {
1566                 struct atmel_mci        *host = slot->host;
1567                 struct mmc_request      *mrq;
1568
1569                 dev_dbg(&slot->mmc->class_dev, "card %s\n",
1570                         present ? "inserted" : "removed");
1571
1572                 spin_lock(&host->lock);
1573
1574                 if (!present)
1575                         clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
1576                 else
1577                         set_bit(ATMCI_CARD_PRESENT, &slot->flags);
1578
1579                 /* Clean up queue if present */
1580                 mrq = slot->mrq;
1581                 if (mrq) {
1582                         if (mrq == host->mrq) {
1583                                 /*
1584                                  * Reset controller to terminate any ongoing
1585                                  * commands or data transfers.
1586                                  */
1587                                 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
1588                                 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
1589                                 atmci_writel(host, ATMCI_MR, host->mode_reg);
1590                                 if (host->caps.has_cfg_reg)
1591                                         atmci_writel(host, ATMCI_CFG, host->cfg_reg);
1592
1593                                 host->data = NULL;
1594                                 host->cmd = NULL;
1595
1596                                 switch (host->state) {
1597                                 case STATE_IDLE:
1598                                         break;
1599                                 case STATE_SENDING_CMD:
1600                                         mrq->cmd->error = -ENOMEDIUM;
1601                                         if (mrq->data)
1602                                                 host->stop_transfer(host);
1603                                         break;
1604                                 case STATE_DATA_XFER:
1605                                         mrq->data->error = -ENOMEDIUM;
1606                                         host->stop_transfer(host);
1607                                         break;
1608                                 case STATE_WAITING_NOTBUSY:
1609                                         mrq->data->error = -ENOMEDIUM;
1610                                         break;
1611                                 case STATE_SENDING_STOP:
1612                                         mrq->stop->error = -ENOMEDIUM;
1613                                         break;
1614                                 case STATE_END_REQUEST:
1615                                         break;
1616                                 }
1617
1618                                 atmci_request_end(host, mrq);
1619                         } else {
1620                                 list_del(&slot->queue_node);
1621                                 mrq->cmd->error = -ENOMEDIUM;
1622                                 if (mrq->data)
1623                                         mrq->data->error = -ENOMEDIUM;
1624                                 if (mrq->stop)
1625                                         mrq->stop->error = -ENOMEDIUM;
1626
1627                                 spin_unlock(&host->lock);
1628                                 mmc_request_done(slot->mmc, mrq);
1629                                 spin_lock(&host->lock);
1630                         }
1631                 }
1632                 spin_unlock(&host->lock);
1633
1634                 mmc_detect_change(slot->mmc, 0);
1635         }
1636 }
1637
1638 static void atmci_tasklet_func(unsigned long priv)
1639 {
1640         struct atmel_mci        *host = (struct atmel_mci *)priv;
1641         struct mmc_request      *mrq = host->mrq;
1642         struct mmc_data         *data = host->data;
1643         enum atmel_mci_state    state = host->state;
1644         enum atmel_mci_state    prev_state;
1645         u32                     status;
1646
1647         spin_lock(&host->lock);
1648
1649         state = host->state;
1650
1651         dev_vdbg(&host->pdev->dev,
1652                 "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
1653                 state, host->pending_events, host->completed_events,
1654                 atmci_readl(host, ATMCI_IMR));
1655
1656         do {
1657                 prev_state = state;
1658                 dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state);
1659
1660                 switch (state) {
1661                 case STATE_IDLE:
1662                         break;
1663
1664                 case STATE_SENDING_CMD:
1665                         /*
1666                          * Command has been sent, we are waiting for command
1667                          * ready. Then we have three next states possible:
1668                          * END_REQUEST by default, WAITING_NOTBUSY if it's a
1669                          * command needing it or DATA_XFER if there is data.
1670                          */
1671                         dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
1672                         if (!atmci_test_and_clear_pending(host,
1673                                                 EVENT_CMD_RDY))
1674                                 break;
1675
1676                         dev_dbg(&host->pdev->dev, "set completed cmd ready\n");
1677                         host->cmd = NULL;
1678                         atmci_set_completed(host, EVENT_CMD_RDY);
1679                         atmci_command_complete(host, mrq->cmd);
1680                         if (mrq->data) {
1681                                 dev_dbg(&host->pdev->dev,
1682                                         "command with data transfer");
1683                                 /*
1684                                  * If there is a command error don't start
1685                                  * data transfer.
1686                                  */
1687                                 if (mrq->cmd->error) {
1688                                         host->stop_transfer(host);
1689                                         host->data = NULL;
1690                                         atmci_writel(host, ATMCI_IDR,
1691                                                      ATMCI_TXRDY | ATMCI_RXRDY
1692                                                      | ATMCI_DATA_ERROR_FLAGS);
1693                                         state = STATE_END_REQUEST;
1694                                 } else
1695                                         state = STATE_DATA_XFER;
1696                         } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) {
1697                                 dev_dbg(&host->pdev->dev,
1698                                         "command response need waiting notbusy");
1699                                 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1700                                 state = STATE_WAITING_NOTBUSY;
1701                         } else
1702                                 state = STATE_END_REQUEST;
1703
1704                         break;
1705
1706                 case STATE_DATA_XFER:
1707                         if (atmci_test_and_clear_pending(host,
1708                                                 EVENT_DATA_ERROR)) {
1709                                 dev_dbg(&host->pdev->dev, "set completed data error\n");
1710                                 atmci_set_completed(host, EVENT_DATA_ERROR);
1711                                 state = STATE_END_REQUEST;
1712                                 break;
1713                         }
1714
1715                         /*
1716                          * A data transfer is in progress. The event expected
1717                          * to move to the next state depends of data transfer
1718                          * type (PDC or DMA). Once transfer done we can move
1719                          * to the next step which is WAITING_NOTBUSY in write
1720                          * case and directly SENDING_STOP in read case.
1721                          */
1722                         dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n");
1723                         if (!atmci_test_and_clear_pending(host,
1724                                                 EVENT_XFER_COMPLETE))
1725                                 break;
1726
1727                         dev_dbg(&host->pdev->dev,
1728                                 "(%s) set completed xfer complete\n",
1729                                 __func__);
1730                         atmci_set_completed(host, EVENT_XFER_COMPLETE);
1731
1732                         if (host->caps.need_notbusy_for_read_ops ||
1733                            (host->data->flags & MMC_DATA_WRITE)) {
1734                                 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1735                                 state = STATE_WAITING_NOTBUSY;
1736                         } else if (host->mrq->stop) {
1737                                 atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
1738                                 atmci_send_stop_cmd(host, data);
1739                                 state = STATE_SENDING_STOP;
1740                         } else {
1741                                 host->data = NULL;
1742                                 data->bytes_xfered = data->blocks * data->blksz;
1743                                 data->error = 0;
1744                                 state = STATE_END_REQUEST;
1745                         }
1746                         break;
1747
1748                 case STATE_WAITING_NOTBUSY:
1749                         /*
1750                          * We can be in the state for two reasons: a command
1751                          * requiring waiting not busy signal (stop command
1752                          * included) or a write operation. In the latest case,
1753                          * we need to send a stop command.
1754                          */
1755                         dev_dbg(&host->pdev->dev, "FSM: not busy?\n");
1756                         if (!atmci_test_and_clear_pending(host,
1757                                                 EVENT_NOTBUSY))
1758                                 break;
1759
1760                         dev_dbg(&host->pdev->dev, "set completed not busy\n");
1761                         atmci_set_completed(host, EVENT_NOTBUSY);
1762
1763                         if (host->data) {
1764                                 /*
1765                                  * For some commands such as CMD53, even if
1766                                  * there is data transfer, there is no stop
1767                                  * command to send.
1768                                  */
1769                                 if (host->mrq->stop) {
1770                                         atmci_writel(host, ATMCI_IER,
1771                                                      ATMCI_CMDRDY);
1772                                         atmci_send_stop_cmd(host, data);
1773                                         state = STATE_SENDING_STOP;
1774                                 } else {
1775                                         host->data = NULL;
1776                                         data->bytes_xfered = data->blocks
1777                                                              * data->blksz;
1778                                         data->error = 0;
1779                                         state = STATE_END_REQUEST;
1780                                 }
1781                         } else
1782                                 state = STATE_END_REQUEST;
1783                         break;
1784
1785                 case STATE_SENDING_STOP:
1786                         /*
1787                          * In this state, it is important to set host->data to
1788                          * NULL (which is tested in the waiting notbusy state)
1789                          * in order to go to the end request state instead of
1790                          * sending stop again.
1791                          */
1792                         dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
1793                         if (!atmci_test_and_clear_pending(host,
1794                                                 EVENT_CMD_RDY))
1795                                 break;
1796
1797                         dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
1798                         host->cmd = NULL;
1799                         data->bytes_xfered = data->blocks * data->blksz;
1800                         data->error = 0;
1801                         atmci_command_complete(host, mrq->stop);
1802                         if (mrq->stop->error) {
1803                                 host->stop_transfer(host);
1804                                 atmci_writel(host, ATMCI_IDR,
1805                                              ATMCI_TXRDY | ATMCI_RXRDY
1806                                              | ATMCI_DATA_ERROR_FLAGS);
1807                                 state = STATE_END_REQUEST;
1808                         } else {
1809                                 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1810                                 state = STATE_WAITING_NOTBUSY;
1811                         }
1812                         host->data = NULL;
1813                         break;
1814
1815                 case STATE_END_REQUEST:
1816                         atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY
1817                                            | ATMCI_DATA_ERROR_FLAGS);
1818                         status = host->data_status;
1819                         if (unlikely(status)) {
1820                                 host->stop_transfer(host);
1821                                 host->data = NULL;
1822                                 if (data) {
1823                                         if (status & ATMCI_DTOE) {
1824                                                 data->error = -ETIMEDOUT;
1825                                         } else if (status & ATMCI_DCRCE) {
1826                                                 data->error = -EILSEQ;
1827                                         } else {
1828                                                 data->error = -EIO;
1829                                         }
1830                                 }
1831                         }
1832
1833                         atmci_request_end(host, host->mrq);
1834                         state = STATE_IDLE;
1835                         break;
1836                 }
1837         } while (state != prev_state);
1838
1839         host->state = state;
1840
1841         spin_unlock(&host->lock);
1842 }
1843
1844 static void atmci_read_data_pio(struct atmel_mci *host)
1845 {
1846         struct scatterlist      *sg = host->sg;
1847         void                    *buf = sg_virt(sg);
1848         unsigned int            offset = host->pio_offset;
1849         struct mmc_data         *data = host->data;
1850         u32                     value;
1851         u32                     status;
1852         unsigned int            nbytes = 0;
1853
1854         do {
1855                 value = atmci_readl(host, ATMCI_RDR);
1856                 if (likely(offset + 4 <= sg->length)) {
1857                         put_unaligned(value, (u32 *)(buf + offset));
1858
1859                         offset += 4;
1860                         nbytes += 4;
1861
1862                         if (offset == sg->length) {
1863                                 flush_dcache_page(sg_page(sg));
1864                                 host->sg = sg = sg_next(sg);
1865                                 host->sg_len--;
1866                                 if (!sg || !host->sg_len)
1867                                         goto done;
1868
1869                                 offset = 0;
1870                                 buf = sg_virt(sg);
1871                         }
1872                 } else {
1873                         unsigned int remaining = sg->length - offset;
1874                         memcpy(buf + offset, &value, remaining);
1875                         nbytes += remaining;
1876
1877                         flush_dcache_page(sg_page(sg));
1878                         host->sg = sg = sg_next(sg);
1879                         host->sg_len--;
1880                         if (!sg || !host->sg_len)
1881                                 goto done;
1882
1883                         offset = 4 - remaining;
1884                         buf = sg_virt(sg);
1885                         memcpy(buf, (u8 *)&value + remaining, offset);
1886                         nbytes += offset;
1887                 }
1888
1889                 status = atmci_readl(host, ATMCI_SR);
1890                 if (status & ATMCI_DATA_ERROR_FLAGS) {
1891                         atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
1892                                                 | ATMCI_DATA_ERROR_FLAGS));
1893                         host->data_status = status;
1894                         data->bytes_xfered += nbytes;
1895                         return;
1896                 }
1897         } while (status & ATMCI_RXRDY);
1898
1899         host->pio_offset = offset;
1900         data->bytes_xfered += nbytes;
1901
1902         return;
1903
1904 done:
1905         atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY);
1906         atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1907         data->bytes_xfered += nbytes;
1908         smp_wmb();
1909         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1910 }
1911
1912 static void atmci_write_data_pio(struct atmel_mci *host)
1913 {
1914         struct scatterlist      *sg = host->sg;
1915         void                    *buf = sg_virt(sg);
1916         unsigned int            offset = host->pio_offset;
1917         struct mmc_data         *data = host->data;
1918         u32                     value;
1919         u32                     status;
1920         unsigned int            nbytes = 0;
1921
1922         do {
1923                 if (likely(offset + 4 <= sg->length)) {
1924                         value = get_unaligned((u32 *)(buf + offset));
1925                         atmci_writel(host, ATMCI_TDR, value);
1926
1927                         offset += 4;
1928                         nbytes += 4;
1929                         if (offset == sg->length) {
1930                                 host->sg = sg = sg_next(sg);
1931                                 host->sg_len--;
1932                                 if (!sg || !host->sg_len)
1933                                         goto done;
1934
1935                                 offset = 0;
1936                                 buf = sg_virt(sg);
1937                         }
1938                 } else {
1939                         unsigned int remaining = sg->length - offset;
1940
1941                         value = 0;
1942                         memcpy(&value, buf + offset, remaining);
1943                         nbytes += remaining;
1944
1945                         host->sg = sg = sg_next(sg);
1946                         host->sg_len--;
1947                         if (!sg || !host->sg_len) {
1948                                 atmci_writel(host, ATMCI_TDR, value);
1949                                 goto done;
1950                         }
1951
1952                         offset = 4 - remaining;
1953                         buf = sg_virt(sg);
1954                         memcpy((u8 *)&value + remaining, buf, offset);
1955                         atmci_writel(host, ATMCI_TDR, value);
1956                         nbytes += offset;
1957                 }
1958
1959                 status = atmci_readl(host, ATMCI_SR);
1960                 if (status & ATMCI_DATA_ERROR_FLAGS) {
1961                         atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
1962                                                 | ATMCI_DATA_ERROR_FLAGS));
1963                         host->data_status = status;
1964                         data->bytes_xfered += nbytes;
1965                         return;
1966                 }
1967         } while (status & ATMCI_TXRDY);
1968
1969         host->pio_offset = offset;
1970         data->bytes_xfered += nbytes;
1971
1972         return;
1973
1974 done:
1975         atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY);
1976         atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
1977         data->bytes_xfered += nbytes;
1978         smp_wmb();
1979         atmci_set_pending(host, EVENT_XFER_COMPLETE);
1980 }
1981
1982 static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)
1983 {
1984         int     i;
1985
1986         for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
1987                 struct atmel_mci_slot *slot = host->slot[i];
1988                 if (slot && (status & slot->sdio_irq)) {
1989                         mmc_signal_sdio_irq(slot->mmc);
1990                 }
1991         }
1992 }
1993
1994
1995 static irqreturn_t atmci_interrupt(int irq, void *dev_id)
1996 {
1997         struct atmel_mci        *host = dev_id;
1998         u32                     status, mask, pending;
1999         unsigned int            pass_count = 0;
2000
2001         do {
2002                 status = atmci_readl(host, ATMCI_SR);
2003                 mask = atmci_readl(host, ATMCI_IMR);
2004                 pending = status & mask;
2005                 if (!pending)
2006                         break;
2007
2008                 if (pending & ATMCI_DATA_ERROR_FLAGS) {
2009                         dev_dbg(&host->pdev->dev, "IRQ: data error\n");
2010                         atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
2011                                         | ATMCI_RXRDY | ATMCI_TXRDY
2012                                         | ATMCI_ENDRX | ATMCI_ENDTX
2013                                         | ATMCI_RXBUFF | ATMCI_TXBUFE);
2014
2015                         host->data_status = status;
2016                         dev_dbg(&host->pdev->dev, "set pending data error\n");
2017                         smp_wmb();
2018                         atmci_set_pending(host, EVENT_DATA_ERROR);
2019                         tasklet_schedule(&host->tasklet);
2020                 }
2021
2022                 if (pending & ATMCI_TXBUFE) {
2023                         dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n");
2024                         atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE);
2025                         atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
2026                         /*
2027                          * We can receive this interruption before having configured
2028                          * the second pdc buffer, so we need to reconfigure first and
2029                          * second buffers again
2030                          */
2031                         if (host->data_size) {
2032                                 atmci_pdc_set_both_buf(host, XFER_TRANSMIT);
2033                                 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
2034                                 atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE);
2035                         } else {
2036                                 atmci_pdc_complete(host);
2037                         }
2038                 } else if (pending & ATMCI_ENDTX) {
2039                         dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n");
2040                         atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
2041
2042                         if (host->data_size) {
2043                                 atmci_pdc_set_single_buf(host,
2044                                                 XFER_TRANSMIT, PDC_SECOND_BUF);
2045                                 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
2046                         }
2047                 }
2048
2049                 if (pending & ATMCI_RXBUFF) {
2050                         dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n");
2051                         atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF);
2052                         atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
2053                         /*
2054                          * We can receive this interruption before having configured
2055                          * the second pdc buffer, so we need to reconfigure first and
2056                          * second buffers again
2057                          */
2058                         if (host->data_size) {
2059                                 atmci_pdc_set_both_buf(host, XFER_RECEIVE);
2060                                 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
2061                                 atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF);
2062                         } else {
2063                                 atmci_pdc_complete(host);
2064                         }
2065                 } else if (pending & ATMCI_ENDRX) {
2066                         dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n");
2067                         atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
2068
2069                         if (host->data_size) {
2070                                 atmci_pdc_set_single_buf(host,
2071                                                 XFER_RECEIVE, PDC_SECOND_BUF);
2072                                 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
2073                         }
2074                 }
2075
2076                 /*
2077                  * First mci IPs, so mainly the ones having pdc, have some
2078                  * issues with the notbusy signal. You can't get it after
2079                  * data transmission if you have not sent a stop command.
2080                  * The appropriate workaround is to use the BLKE signal.
2081                  */
2082                 if (pending & ATMCI_BLKE) {
2083                         dev_dbg(&host->pdev->dev, "IRQ: blke\n");
2084                         atmci_writel(host, ATMCI_IDR, ATMCI_BLKE);
2085                         smp_wmb();
2086                         dev_dbg(&host->pdev->dev, "set pending notbusy\n");
2087                         atmci_set_pending(host, EVENT_NOTBUSY);
2088                         tasklet_schedule(&host->tasklet);
2089                 }
2090
2091                 if (pending & ATMCI_NOTBUSY) {
2092                         dev_dbg(&host->pdev->dev, "IRQ: not_busy\n");
2093                         atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY);
2094                         smp_wmb();
2095                         dev_dbg(&host->pdev->dev, "set pending notbusy\n");
2096                         atmci_set_pending(host, EVENT_NOTBUSY);
2097                         tasklet_schedule(&host->tasklet);
2098                 }
2099
2100                 if (pending & ATMCI_RXRDY)
2101                         atmci_read_data_pio(host);
2102                 if (pending & ATMCI_TXRDY)
2103                         atmci_write_data_pio(host);
2104
2105                 if (pending & ATMCI_CMDRDY) {
2106                         dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n");
2107                         atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
2108                         host->cmd_status = status;
2109                         smp_wmb();
2110                         dev_dbg(&host->pdev->dev, "set pending cmd rdy\n");
2111                         atmci_set_pending(host, EVENT_CMD_RDY);
2112                         tasklet_schedule(&host->tasklet);
2113                 }
2114
2115                 if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
2116                         atmci_sdio_interrupt(host, status);
2117
2118         } while (pass_count++ < 5);
2119
2120         return pass_count ? IRQ_HANDLED : IRQ_NONE;
2121 }
2122
2123 static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
2124 {
2125         struct atmel_mci_slot   *slot = dev_id;
2126
2127         /*
2128          * Disable interrupts until the pin has stabilized and check
2129          * the state then. Use mod_timer() since we may be in the
2130          * middle of the timer routine when this interrupt triggers.
2131          */
2132         disable_irq_nosync(irq);
2133         mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
2134
2135         return IRQ_HANDLED;
2136 }
2137
2138 static int __init atmci_init_slot(struct atmel_mci *host,
2139                 struct mci_slot_pdata *slot_data, unsigned int id,
2140                 u32 sdc_reg, u32 sdio_irq)
2141 {
2142         struct mmc_host                 *mmc;
2143         struct atmel_mci_slot           *slot;
2144
2145         mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
2146         if (!mmc)
2147                 return -ENOMEM;
2148
2149         slot = mmc_priv(mmc);
2150         slot->mmc = mmc;
2151         slot->host = host;
2152         slot->detect_pin = slot_data->detect_pin;
2153         slot->wp_pin = slot_data->wp_pin;
2154         slot->detect_is_active_high = slot_data->detect_is_active_high;
2155         slot->sdc_reg = sdc_reg;
2156         slot->sdio_irq = sdio_irq;
2157
2158         dev_dbg(&mmc->class_dev,
2159                 "slot[%u]: bus_width=%u, detect_pin=%d, "
2160                 "detect_is_active_high=%s, wp_pin=%d\n",
2161                 id, slot_data->bus_width, slot_data->detect_pin,
2162                 slot_data->detect_is_active_high ? "true" : "false",
2163                 slot_data->wp_pin);
2164
2165         mmc->ops = &atmci_ops;
2166         mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
2167         mmc->f_max = host->bus_hz / 2;
2168         mmc->ocr_avail  = MMC_VDD_32_33 | MMC_VDD_33_34;
2169         if (sdio_irq)
2170                 mmc->caps |= MMC_CAP_SDIO_IRQ;
2171         if (host->caps.has_highspeed)
2172                 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
2173         /*
2174          * Without the read/write proof capability, it is strongly suggested to
2175          * use only one bit for data to prevent fifo underruns and overruns
2176          * which will corrupt data.
2177          */
2178         if ((slot_data->bus_width >= 4) && host->caps.has_rwproof)
2179                 mmc->caps |= MMC_CAP_4_BIT_DATA;
2180
2181         if (atmci_get_version(host) < 0x200) {
2182                 mmc->max_segs = 256;
2183                 mmc->max_blk_size = 4095;
2184                 mmc->max_blk_count = 256;
2185                 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
2186                 mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs;
2187         } else {
2188                 mmc->max_segs = 64;
2189                 mmc->max_req_size = 32768 * 512;
2190                 mmc->max_blk_size = 32768;
2191                 mmc->max_blk_count = 512;
2192         }
2193
2194         /* Assume card is present initially */
2195         set_bit(ATMCI_CARD_PRESENT, &slot->flags);
2196         if (gpio_is_valid(slot->detect_pin)) {
2197                 if (gpio_request(slot->detect_pin, "mmc_detect")) {
2198                         dev_dbg(&mmc->class_dev, "no detect pin available\n");
2199                         slot->detect_pin = -EBUSY;
2200                 } else if (gpio_get_value(slot->detect_pin) ^
2201                                 slot->detect_is_active_high) {
2202                         clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
2203                 }
2204         }
2205
2206         if (!gpio_is_valid(slot->detect_pin))
2207                 mmc->caps |= MMC_CAP_NEEDS_POLL;
2208
2209         if (gpio_is_valid(slot->wp_pin)) {
2210                 if (gpio_request(slot->wp_pin, "mmc_wp")) {
2211                         dev_dbg(&mmc->class_dev, "no WP pin available\n");
2212                         slot->wp_pin = -EBUSY;
2213                 }
2214         }
2215
2216         host->slot[id] = slot;
2217         mmc_regulator_get_supply(mmc);
2218         mmc_add_host(mmc);
2219
2220         if (gpio_is_valid(slot->detect_pin)) {
2221                 int ret;
2222
2223                 setup_timer(&slot->detect_timer, atmci_detect_change,
2224                                 (unsigned long)slot);
2225
2226                 ret = request_irq(gpio_to_irq(slot->detect_pin),
2227                                 atmci_detect_interrupt,
2228                                 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
2229                                 "mmc-detect", slot);
2230                 if (ret) {
2231                         dev_dbg(&mmc->class_dev,
2232                                 "could not request IRQ %d for detect pin\n",
2233                                 gpio_to_irq(slot->detect_pin));
2234                         gpio_free(slot->detect_pin);
2235                         slot->detect_pin = -EBUSY;
2236                 }
2237         }
2238
2239         atmci_init_debugfs(slot);
2240
2241         return 0;
2242 }
2243
2244 static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
2245                 unsigned int id)
2246 {
2247         /* Debugfs stuff is cleaned up by mmc core */
2248
2249         set_bit(ATMCI_SHUTDOWN, &slot->flags);
2250         smp_wmb();
2251
2252         mmc_remove_host(slot->mmc);
2253
2254         if (gpio_is_valid(slot->detect_pin)) {
2255                 int pin = slot->detect_pin;
2256
2257                 free_irq(gpio_to_irq(pin), slot);
2258                 del_timer_sync(&slot->detect_timer);
2259                 gpio_free(pin);
2260         }
2261         if (gpio_is_valid(slot->wp_pin))
2262                 gpio_free(slot->wp_pin);
2263
2264         slot->host->slot[id] = NULL;
2265         mmc_free_host(slot->mmc);
2266 }
2267
2268 static bool atmci_filter(struct dma_chan *chan, void *pdata)
2269 {
2270         struct mci_platform_data *sl_pdata = pdata;
2271         struct mci_dma_data *sl;
2272
2273         if (!sl_pdata)
2274                 return false;
2275
2276         sl = sl_pdata->dma_slave;
2277         if (sl && find_slave_dev(sl) == chan->device->dev) {
2278                 chan->private = slave_data_ptr(sl);
2279                 return true;
2280         } else {
2281                 return false;
2282         }
2283 }
2284
2285 static bool atmci_configure_dma(struct atmel_mci *host)
2286 {
2287         struct mci_platform_data        *pdata;
2288         dma_cap_mask_t mask;
2289
2290         if (host == NULL)
2291                 return false;
2292
2293         pdata = host->pdev->dev.platform_data;
2294
2295         dma_cap_zero(mask);
2296         dma_cap_set(DMA_SLAVE, mask);
2297
2298         host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
2299                                                           &host->pdev->dev, "rxtx");
2300         if (!host->dma.chan) {
2301                 dev_warn(&host->pdev->dev, "no DMA channel available\n");
2302                 return false;
2303         } else {
2304                 dev_info(&host->pdev->dev,
2305                                         "using %s for DMA transfers\n",
2306                                         dma_chan_name(host->dma.chan));
2307
2308                 host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
2309                 host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
2310                 host->dma_conf.src_maxburst = 1;
2311                 host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
2312                 host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
2313                 host->dma_conf.dst_maxburst = 1;
2314                 host->dma_conf.device_fc = false;
2315                 return true;
2316         }
2317 }
2318
2319 /*
2320  * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
2321  * HSMCI provides DMA support and a new config register but no more supports
2322  * PDC.
2323  */
2324 static void __init atmci_get_cap(struct atmel_mci *host)
2325 {
2326         unsigned int version;
2327
2328         version = atmci_get_version(host);
2329         dev_info(&host->pdev->dev,
2330                         "version: 0x%x\n", version);
2331
2332         host->caps.has_dma_conf_reg = 0;
2333         host->caps.has_pdc = ATMCI_PDC_CONNECTED;
2334         host->caps.has_cfg_reg = 0;
2335         host->caps.has_cstor_reg = 0;
2336         host->caps.has_highspeed = 0;
2337         host->caps.has_rwproof = 0;
2338         host->caps.has_odd_clk_div = 0;
2339         host->caps.has_bad_data_ordering = 1;
2340         host->caps.need_reset_after_xfer = 1;
2341         host->caps.need_blksz_mul_4 = 1;
2342         host->caps.need_notbusy_for_read_ops = 0;
2343
2344         /* keep only major version number */
2345         switch (version & 0xf00) {
2346         case 0x500:
2347                 host->caps.has_odd_clk_div = 1;
2348         case 0x400:
2349         case 0x300:
2350                 host->caps.has_dma_conf_reg = 1;
2351                 host->caps.has_pdc = 0;
2352                 host->caps.has_cfg_reg = 1;
2353                 host->caps.has_cstor_reg = 1;
2354                 host->caps.has_highspeed = 1;
2355         case 0x200:
2356                 host->caps.has_rwproof = 1;
2357                 host->caps.need_blksz_mul_4 = 0;
2358                 host->caps.need_notbusy_for_read_ops = 1;
2359         case 0x100:
2360                 host->caps.has_bad_data_ordering = 0;
2361                 host->caps.need_reset_after_xfer = 0;
2362         case 0x0:
2363                 break;
2364         default:
2365                 host->caps.has_pdc = 0;
2366                 dev_warn(&host->pdev->dev,
2367                                 "Unmanaged mci version, set minimum capabilities\n");
2368                 break;
2369         }
2370 }
2371
2372 static int __init atmci_probe(struct platform_device *pdev)
2373 {
2374         struct mci_platform_data        *pdata;
2375         struct atmel_mci                *host;
2376         struct resource                 *regs;
2377         unsigned int                    nr_slots;
2378         int                             irq;
2379         int                             ret;
2380
2381         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2382         if (!regs)
2383                 return -ENXIO;
2384         pdata = pdev->dev.platform_data;
2385         if (!pdata) {
2386                 pdata = atmci_of_init(pdev);
2387                 if (IS_ERR(pdata)) {
2388                         dev_err(&pdev->dev, "platform data not available\n");
2389                         return PTR_ERR(pdata);
2390                 }
2391         }
2392
2393         irq = platform_get_irq(pdev, 0);
2394         if (irq < 0)
2395                 return irq;
2396
2397         host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL);
2398         if (!host)
2399                 return -ENOMEM;
2400
2401         host->pdev = pdev;
2402         spin_lock_init(&host->lock);
2403         INIT_LIST_HEAD(&host->queue);
2404
2405         host->mck = clk_get(&pdev->dev, "mci_clk");
2406         if (IS_ERR(host->mck)) {
2407                 ret = PTR_ERR(host->mck);
2408                 goto err_clk_get;
2409         }
2410
2411         ret = -ENOMEM;
2412         host->regs = ioremap(regs->start, resource_size(regs));
2413         if (!host->regs)
2414                 goto err_ioremap;
2415
2416         ret = clk_prepare_enable(host->mck);
2417         if (ret)
2418                 goto err_request_irq;
2419         atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
2420         host->bus_hz = clk_get_rate(host->mck);
2421         clk_disable_unprepare(host->mck);
2422
2423         host->mapbase = regs->start;
2424
2425         tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
2426
2427         ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
2428         if (ret)
2429                 goto err_request_irq;
2430
2431         /* Get MCI capabilities and set operations according to it */
2432         atmci_get_cap(host);
2433         if (atmci_configure_dma(host)) {
2434                 host->prepare_data = &atmci_prepare_data_dma;
2435                 host->submit_data = &atmci_submit_data_dma;
2436                 host->stop_transfer = &atmci_stop_transfer_dma;
2437         } else if (host->caps.has_pdc) {
2438                 dev_info(&pdev->dev, "using PDC\n");
2439                 host->prepare_data = &atmci_prepare_data_pdc;
2440                 host->submit_data = &atmci_submit_data_pdc;
2441                 host->stop_transfer = &atmci_stop_transfer_pdc;
2442         } else {
2443                 dev_info(&pdev->dev, "using PIO\n");
2444                 host->prepare_data = &atmci_prepare_data;
2445                 host->submit_data = &atmci_submit_data;
2446                 host->stop_transfer = &atmci_stop_transfer;
2447         }
2448
2449         platform_set_drvdata(pdev, host);
2450
2451         setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
2452
2453         /* We need at least one slot to succeed */
2454         nr_slots = 0;
2455         ret = -ENODEV;
2456         if (pdata->slot[0].bus_width) {
2457                 ret = atmci_init_slot(host, &pdata->slot[0],
2458                                 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA);
2459                 if (!ret) {
2460                         nr_slots++;
2461                         host->buf_size = host->slot[0]->mmc->max_req_size;
2462                 }
2463         }
2464         if (pdata->slot[1].bus_width) {
2465                 ret = atmci_init_slot(host, &pdata->slot[1],
2466                                 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB);
2467                 if (!ret) {
2468                         nr_slots++;
2469                         if (host->slot[1]->mmc->max_req_size > host->buf_size)
2470                                 host->buf_size =
2471                                         host->slot[1]->mmc->max_req_size;
2472                 }
2473         }
2474
2475         if (!nr_slots) {
2476                 dev_err(&pdev->dev, "init failed: no slot defined\n");
2477                 goto err_init_slot;
2478         }
2479
2480         if (!host->caps.has_rwproof) {
2481                 host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size,
2482                                                   &host->buf_phys_addr,
2483                                                   GFP_KERNEL);
2484                 if (!host->buffer) {
2485                         ret = -ENOMEM;
2486                         dev_err(&pdev->dev, "buffer allocation failed\n");
2487                         goto err_init_slot;
2488                 }
2489         }
2490
2491         dev_info(&pdev->dev,
2492                         "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
2493                         host->mapbase, irq, nr_slots);
2494
2495         return 0;
2496
2497 err_init_slot:
2498         if (host->dma.chan)
2499                 dma_release_channel(host->dma.chan);
2500         free_irq(irq, host);
2501 err_request_irq:
2502         iounmap(host->regs);
2503 err_ioremap:
2504         clk_put(host->mck);
2505 err_clk_get:
2506         kfree(host);
2507         return ret;
2508 }
2509
2510 static int __exit atmci_remove(struct platform_device *pdev)
2511 {
2512         struct atmel_mci        *host = platform_get_drvdata(pdev);
2513         unsigned int            i;
2514
2515         if (host->buffer)
2516                 dma_free_coherent(&pdev->dev, host->buf_size,
2517                                   host->buffer, host->buf_phys_addr);
2518
2519         for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
2520                 if (host->slot[i])
2521                         atmci_cleanup_slot(host->slot[i], i);
2522         }
2523
2524         clk_prepare_enable(host->mck);
2525         atmci_writel(host, ATMCI_IDR, ~0UL);
2526         atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
2527         atmci_readl(host, ATMCI_SR);
2528         clk_disable_unprepare(host->mck);
2529
2530         if (host->dma.chan)
2531                 dma_release_channel(host->dma.chan);
2532
2533         free_irq(platform_get_irq(pdev, 0), host);
2534         iounmap(host->regs);
2535
2536         clk_put(host->mck);
2537         kfree(host);
2538
2539         return 0;
2540 }
2541
2542 static struct platform_driver atmci_driver = {
2543         .remove         = __exit_p(atmci_remove),
2544         .driver         = {
2545                 .name           = "atmel_mci",
2546                 .of_match_table = of_match_ptr(atmci_dt_ids),
2547         },
2548 };
2549
2550 static int __init atmci_init(void)
2551 {
2552         return platform_driver_probe(&atmci_driver, atmci_probe);
2553 }
2554
2555 static void __exit atmci_exit(void)
2556 {
2557         platform_driver_unregister(&atmci_driver);
2558 }
2559
2560 late_initcall(atmci_init); /* try to load after dma driver when built-in */
2561 module_exit(atmci_exit);
2562
2563 MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
2564 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
2565 MODULE_LICENSE("GPL v2");