drivers/net/e1000/e1000_main.c

   1 /*******************************************************************************
   2
   3
   4   Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms of the GNU General Public License as published by the Free
   8   Software Foundation; either version 2 of the License, or (at your option)
   9   any later version.
  10
  11   This program is distributed in the hope that it will be useful, but WITHOUT
  12   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14   more details.
  15
  16   You should have received a copy of the GNU General Public License along with
  17   this program; if not, write to the Free Software Foundation, Inc., 59
  18   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  19
  20   The full GNU General Public License is included in this distribution in the
  21   file called LICENSE.
  22
  23   Contact Information:
  24   Linux NICS <linux.nics@intel.com>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include "e1000.h"
  30
  31 /* Change Log
  32  * 6.0.58       4/20/05
  33  *   o Accepted ethtool cleanup patch from Stephen Hemminger
  34  * 6.0.44+      2/15/05
  35  *   o applied Anton's patch to resolve tx hang in hardware
  36  *   o Applied Andrew Mortons patch - e1000 stops working after resume
  37  */
  38
  39 char e1000_driver_name[] = "e1000";
  40 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
  41 #ifndef CONFIG_E1000_NAPI
  42 #define DRIVERNAPI
  43 #else
  44 #define DRIVERNAPI "-NAPI"
  45 #endif
  46 #define DRV_VERSION "6.1.16-k2"DRIVERNAPI
  47 char e1000_driver_version[] = DRV_VERSION;
  48 static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
  49
  50 /* e1000_pci_tbl - PCI Device ID Table
  51  *
  52  * Last entry must be all 0s
  53  *
  54  * Macro expands to...
  55  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  56  */
  57 static struct pci_device_id e1000_pci_tbl[] = {
  58         INTEL_E1000_ETHERNET_DEVICE(0x1000),
  59         INTEL_E1000_ETHERNET_DEVICE(0x1001),
  60         INTEL_E1000_ETHERNET_DEVICE(0x1004),
  61         INTEL_E1000_ETHERNET_DEVICE(0x1008),
  62         INTEL_E1000_ETHERNET_DEVICE(0x1009),
  63         INTEL_E1000_ETHERNET_DEVICE(0x100C),
  64         INTEL_E1000_ETHERNET_DEVICE(0x100D),
  65         INTEL_E1000_ETHERNET_DEVICE(0x100E),
  66         INTEL_E1000_ETHERNET_DEVICE(0x100F),
  67         INTEL_E1000_ETHERNET_DEVICE(0x1010),
  68         INTEL_E1000_ETHERNET_DEVICE(0x1011),
  69         INTEL_E1000_ETHERNET_DEVICE(0x1012),
  70         INTEL_E1000_ETHERNET_DEVICE(0x1013),
  71         INTEL_E1000_ETHERNET_DEVICE(0x1014),
  72         INTEL_E1000_ETHERNET_DEVICE(0x1015),
  73         INTEL_E1000_ETHERNET_DEVICE(0x1016),
  74         INTEL_E1000_ETHERNET_DEVICE(0x1017),
  75         INTEL_E1000_ETHERNET_DEVICE(0x1018),
  76         INTEL_E1000_ETHERNET_DEVICE(0x1019),
  77         INTEL_E1000_ETHERNET_DEVICE(0x101A),
  78         INTEL_E1000_ETHERNET_DEVICE(0x101D),
  79         INTEL_E1000_ETHERNET_DEVICE(0x101E),
  80         INTEL_E1000_ETHERNET_DEVICE(0x1026),
  81         INTEL_E1000_ETHERNET_DEVICE(0x1027),
  82         INTEL_E1000_ETHERNET_DEVICE(0x1028),
  83         INTEL_E1000_ETHERNET_DEVICE(0x105E),
  84         INTEL_E1000_ETHERNET_DEVICE(0x105F),
  85         INTEL_E1000_ETHERNET_DEVICE(0x1060),
  86         INTEL_E1000_ETHERNET_DEVICE(0x1075),
  87         INTEL_E1000_ETHERNET_DEVICE(0x1076),
  88         INTEL_E1000_ETHERNET_DEVICE(0x1077),
  89         INTEL_E1000_ETHERNET_DEVICE(0x1078),
  90         INTEL_E1000_ETHERNET_DEVICE(0x1079),
  91         INTEL_E1000_ETHERNET_DEVICE(0x107A),
  92         INTEL_E1000_ETHERNET_DEVICE(0x107B),
  93         INTEL_E1000_ETHERNET_DEVICE(0x107C),
  94         INTEL_E1000_ETHERNET_DEVICE(0x107D),
  95         INTEL_E1000_ETHERNET_DEVICE(0x107E),
  96         INTEL_E1000_ETHERNET_DEVICE(0x107F),
  97         INTEL_E1000_ETHERNET_DEVICE(0x108A),
  98         INTEL_E1000_ETHERNET_DEVICE(0x108B),
  99         INTEL_E1000_ETHERNET_DEVICE(0x108C),
 100         INTEL_E1000_ETHERNET_DEVICE(0x109A),
 101         /* required last entry */
 102         {0,}
 103 };
 104
 105 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 106
 107 int e1000_up(struct e1000_adapter *adapter);
 108 void e1000_down(struct e1000_adapter *adapter);
 109 void e1000_reset(struct e1000_adapter *adapter);
 110 int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
 111 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 112 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 113 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 114 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 115 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 116                                     struct e1000_tx_ring *txdr);
 117 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 118                                     struct e1000_rx_ring *rxdr);
 119 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
 120                                     struct e1000_tx_ring *tx_ring);
 121 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
 122                                     struct e1000_rx_ring *rx_ring);
 123 void e1000_update_stats(struct e1000_adapter *adapter);
 124
 125 /* Local Function Prototypes */
 126
 127 static int e1000_init_module(void);
 128 static void e1000_exit_module(void);
 129 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 130 static void __devexit e1000_remove(struct pci_dev *pdev);
 131 static int e1000_alloc_queues(struct e1000_adapter *adapter);
 132 #ifdef CONFIG_E1000_MQ
 133 static void e1000_setup_queue_mapping(struct e1000_adapter *adapter);
 134 #endif
 135 static int e1000_sw_init(struct e1000_adapter *adapter);
 136 static int e1000_open(struct net_device *netdev);
 137 static int e1000_close(struct net_device *netdev);
 138 static void e1000_configure_tx(struct e1000_adapter *adapter);
 139 static void e1000_configure_rx(struct e1000_adapter *adapter);
 140 static void e1000_setup_rctl(struct e1000_adapter *adapter);
 141 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 142 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
 143 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 144                                 struct e1000_tx_ring *tx_ring);
 145 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 146                                 struct e1000_rx_ring *rx_ring);
 147 static void e1000_set_multi(struct net_device *netdev);
 148 static void e1000_update_phy_info(unsigned long data);
 149 static void e1000_watchdog(unsigned long data);
 150 static void e1000_watchdog_task(struct e1000_adapter *adapter);
 151 static void e1000_82547_tx_fifo_stall(unsigned long data);
 152 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 153 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 154 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 155 static int e1000_set_mac(struct net_device *netdev, void *p);
 156 static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs);
 157 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
 158                                     struct e1000_tx_ring *tx_ring);
 159 #ifdef CONFIG_E1000_NAPI
 160 static int e1000_clean(struct net_device *poll_dev, int *budget);
 161 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 162                                     struct e1000_rx_ring *rx_ring,
 163                                     int *work_done, int work_to_do);
 164 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 165                                        struct e1000_rx_ring *rx_ring,
 166                                        int *work_done, int work_to_do);
 167 #else
 168 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 169                                     struct e1000_rx_ring *rx_ring);
 170 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 171                                        struct e1000_rx_ring *rx_ring);
 172 #endif
 173 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 174                                    struct e1000_rx_ring *rx_ring);
 175 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 176                                       struct e1000_rx_ring *rx_ring);
 177 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 178 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 179                            int cmd);
 180 void e1000_set_ethtool_ops(struct net_device *netdev);
 181 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
 182 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
 183 static void e1000_tx_timeout(struct net_device *dev);
 184 static void e1000_tx_timeout_task(struct net_device *dev);
 185 static void e1000_smartspeed(struct e1000_adapter *adapter);
 186 static inline int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 187                                               struct sk_buff *skb);
 188
 189 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 190 static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 191 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 192 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 193
 194 #ifdef CONFIG_PM
 195 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 196 static int e1000_resume(struct pci_dev *pdev);
 197 #endif
 198
 199 #ifdef CONFIG_NET_POLL_CONTROLLER
 200 /* for netdump / net console */
 201 static void e1000_netpoll (struct net_device *netdev);
 202 #endif
 203
 204 #ifdef CONFIG_E1000_MQ
 205 /* for multiple Rx queues */
 206 void e1000_rx_schedule(void *data);
 207 #endif
 208
 209 /* Exported from other modules */
 210
 211 extern void e1000_check_options(struct e1000_adapter *adapter);
 212
 213 static struct pci_driver e1000_driver = {
 214         .name     = e1000_driver_name,
 215         .id_table = e1000_pci_tbl,
 216         .probe    = e1000_probe,
 217         .remove   = __devexit_p(e1000_remove),
 218         /* Power Managment Hooks */
 219 #ifdef CONFIG_PM
 220         .suspend  = e1000_suspend,
 221         .resume   = e1000_resume
 222 #endif
 223 };
 224
 225 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 226 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 227 MODULE_LICENSE("GPL");
 228 MODULE_VERSION(DRV_VERSION);
 229
 230 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
 231 module_param(debug, int, 0);
 232 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 233
 234 /**
 235  * e1000_init_module - Driver Registration Routine
 236  *
 237  * e1000_init_module is the first routine called when the driver is
 238  * loaded. All it does is register with the PCI subsystem.
 239  **/
 240
 241 static int __init
 242 e1000_init_module(void)
 243 {
 244         int ret;
 245         printk(KERN_INFO "%s - version %s\n",
 246                e1000_driver_string, e1000_driver_version);
 247
 248         printk(KERN_INFO "%s\n", e1000_copyright);
 249
 250         ret = pci_module_init(&e1000_driver);
 251
 252         return ret;
 253 }
 254
 255 module_init(e1000_init_module);
 256
 257 /**
 258  * e1000_exit_module - Driver Exit Cleanup Routine
 259  *
 260  * e1000_exit_module is called just before the driver is removed
 261  * from memory.
 262  **/
 263
 264 static void __exit
 265 e1000_exit_module(void)
 266 {
 267         pci_unregister_driver(&e1000_driver);
 268 }
 269
 270 module_exit(e1000_exit_module);
 271
 272 /**
 273  * e1000_irq_disable - Mask off interrupt generation on the NIC
 274  * @adapter: board private structure
 275  **/
 276
 277 static inline void
 278 e1000_irq_disable(struct e1000_adapter *adapter)
 279 {
 280         atomic_inc(&adapter->irq_sem);
 281         E1000_WRITE_REG(&adapter->hw, IMC, ~0);
 282         E1000_WRITE_FLUSH(&adapter->hw);
 283         synchronize_irq(adapter->pdev->irq);
 284 }
 285
 286 /**
 287  * e1000_irq_enable - Enable default interrupt generation settings
 288  * @adapter: board private structure
 289  **/
 290
 291 static inline void
 292 e1000_irq_enable(struct e1000_adapter *adapter)
 293 {
 294         if(likely(atomic_dec_and_test(&adapter->irq_sem))) {
 295                 E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
 296                 E1000_WRITE_FLUSH(&adapter->hw);
 297         }
 298 }
 299
 300 static void
 301 e1000_update_mng_vlan(struct e1000_adapter *adapter)
 302 {
 303         struct net_device *netdev = adapter->netdev;
 304         uint16_t vid = adapter->hw.mng_cookie.vlan_id;
 305         uint16_t old_vid = adapter->mng_vlan_id;
 306         if(adapter->vlgrp) {
 307                 if(!adapter->vlgrp->vlan_devices[vid]) {
 308                         if(adapter->hw.mng_cookie.status &
 309                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
 310                                 e1000_vlan_rx_add_vid(netdev, vid);
 311                                 adapter->mng_vlan_id = vid;
 312                         } else
 313                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 314
 315                         if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
 316                                         (vid != old_vid) &&
 317                                         !adapter->vlgrp->vlan_devices[old_vid])
 318                                 e1000_vlan_rx_kill_vid(netdev, old_vid);
 319                 }
 320         }
 321 }
 322
 323 int
 324 e1000_up(struct e1000_adapter *adapter)
 325 {
 326         struct net_device *netdev = adapter->netdev;
 327         int i, err;
 328
 329         /* hardware has been reset, we need to reload some things */
 330
 331         /* Reset the PHY if it was previously powered down */
 332         if(adapter->hw.media_type == e1000_media_type_copper) {
 333                 uint16_t mii_reg;
 334                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 335                 if(mii_reg & MII_CR_POWER_DOWN)
 336                         e1000_phy_reset(&adapter->hw);
 337         }
 338
 339         e1000_set_multi(netdev);
 340
 341         e1000_restore_vlan(adapter);
 342
 343         e1000_configure_tx(adapter);
 344         e1000_setup_rctl(adapter);
 345         e1000_configure_rx(adapter);
 346         for (i = 0; i < adapter->num_queues; i++)
 347                 adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
 348
 349 #ifdef CONFIG_PCI_MSI
 350         if(adapter->hw.mac_type > e1000_82547_rev_2) {
 351                 adapter->have_msi = TRUE;
 352                 if((err = pci_enable_msi(adapter->pdev))) {
 353                         DPRINTK(PROBE, ERR,
 354                          "Unable to allocate MSI interrupt Error: %d\n", err);
 355                         adapter->have_msi = FALSE;
 356                 }
 357         }
 358 #endif
 359         if((err = request_irq(adapter->pdev->irq, &e1000_intr,
 360                               SA_SHIRQ | SA_SAMPLE_RANDOM,
 361                               netdev->name, netdev))) {
 362                 DPRINTK(PROBE, ERR,
 363                     "Unable to allocate interrupt Error: %d\n", err);
 364                 return err;
 365         }
 366
 367         mod_timer(&adapter->watchdog_timer, jiffies);
 368
 369 #ifdef CONFIG_E1000_NAPI
 370         netif_poll_enable(netdev);
 371 #endif
 372         e1000_irq_enable(adapter);
 373
 374         return 0;
 375 }
 376
 377 void
 378 e1000_down(struct e1000_adapter *adapter)
 379 {
 380         struct net_device *netdev = adapter->netdev;
 381
 382         e1000_irq_disable(adapter);
 383 #ifdef CONFIG_E1000_MQ
 384         while (atomic_read(&adapter->rx_sched_call_data.count) != 0);
 385 #endif
 386         free_irq(adapter->pdev->irq, netdev);
 387 #ifdef CONFIG_PCI_MSI
 388         if(adapter->hw.mac_type > e1000_82547_rev_2 &&
 389            adapter->have_msi == TRUE)
 390                 pci_disable_msi(adapter->pdev);
 391 #endif
 392         del_timer_sync(&adapter->tx_fifo_stall_timer);
 393         del_timer_sync(&adapter->watchdog_timer);
 394         del_timer_sync(&adapter->phy_info_timer);
 395
 396 #ifdef CONFIG_E1000_NAPI
 397         netif_poll_disable(netdev);
 398 #endif
 399         adapter->link_speed = 0;
 400         adapter->link_duplex = 0;
 401         netif_carrier_off(netdev);
 402         netif_stop_queue(netdev);
 403
 404         e1000_reset(adapter);
 405         e1000_clean_all_tx_rings(adapter);
 406         e1000_clean_all_rx_rings(adapter);
 407
 408         /* If WoL is not enabled and management mode is not IAMT
 409          * Power down the PHY so no link is implied when interface is down */
 410         if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
 411            adapter->hw.media_type == e1000_media_type_copper &&
 412            !e1000_check_mng_mode(&adapter->hw) &&
 413            !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)) {
 414                 uint16_t mii_reg;
 415                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 416                 mii_reg |= MII_CR_POWER_DOWN;
 417                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 418                 mdelay(1);
 419         }
 420 }
 421
 422 void
 423 e1000_reset(struct e1000_adapter *adapter)
 424 {
 425         struct net_device *netdev = adapter->netdev;
 426         uint32_t pba, manc;
 427         uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 428         uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
 429
 430         /* Repartition Pba for greater than 9k mtu
 431          * To take effect CTRL.RST is required.
 432          */
 433
 434         switch (adapter->hw.mac_type) {
 435         case e1000_82547:
 436         case e1000_82547_rev_2:
 437                 pba = E1000_PBA_30K;
 438                 break;
 439         case e1000_82571:
 440         case e1000_82572:
 441                 pba = E1000_PBA_38K;
 442                 break;
 443         case e1000_82573:
 444                 pba = E1000_PBA_12K;
 445                 break;
 446         default:
 447                 pba = E1000_PBA_48K;
 448                 break;
 449         }
 450
 451         if((adapter->hw.mac_type != e1000_82573) &&
 452            (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) {
 453                 pba -= 8; /* allocate more FIFO for Tx */
 454                 /* send an XOFF when there is enough space in the
 455                  * Rx FIFO to hold one extra full size Rx packet
 456                 */
 457                 fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE +
 458                                         ETHERNET_FCS_SIZE + 1;
 459                 fc_low_water_mark = fc_high_water_mark + 8;
 460         }
 461
 462
 463         if(adapter->hw.mac_type == e1000_82547) {
 464                 adapter->tx_fifo_head = 0;
 465                 adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
 466                 adapter->tx_fifo_size =
 467                         (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
 468                 atomic_set(&adapter->tx_fifo_stall, 0);
 469         }
 470
 471         E1000_WRITE_REG(&adapter->hw, PBA, pba);
 472
 473         /* flow control settings */
 474         adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
 475                                     fc_high_water_mark;
 476         adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
 477                                    fc_low_water_mark;
 478         adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
 479         adapter->hw.fc_send_xon = 1;
 480         adapter->hw.fc = adapter->hw.original_fc;
 481
 482         /* Allow time for pending master requests to run */
 483         e1000_reset_hw(&adapter->hw);
 484         if(adapter->hw.mac_type >= e1000_82544)
 485                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
 486         if(e1000_init_hw(&adapter->hw))
 487                 DPRINTK(PROBE, ERR, "Hardware Error\n");
 488         e1000_update_mng_vlan(adapter);
 489         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 490         E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
 491
 492         e1000_reset_adaptive(&adapter->hw);
 493         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
 494         if (adapter->en_mng_pt) {
 495                 manc = E1000_READ_REG(&adapter->hw, MANC);
 496                 manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
 497                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 498         }
 499 }
 500
 501 /**
 502  * e1000_probe - Device Initialization Routine
 503  * @pdev: PCI device information struct
 504  * @ent: entry in e1000_pci_tbl
 505  *
 506  * Returns 0 on success, negative on failure
 507  *
 508  * e1000_probe initializes an adapter identified by a pci_dev structure.
 509  * The OS initialization, configuring of the adapter private structure,
 510  * and a hardware reset occur.
 511  **/
 512
 513 static int __devinit
 514 e1000_probe(struct pci_dev *pdev,
 515             const struct pci_device_id *ent)
 516 {
 517         struct net_device *netdev;
 518         struct e1000_adapter *adapter;
 519         unsigned long mmio_start, mmio_len;
 520         uint32_t ctrl_ext;
 521         uint32_t swsm;
 522
 523         static int cards_found = 0;
 524         int i, err, pci_using_dac;
 525         uint16_t eeprom_data;
 526         uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
 527         if((err = pci_enable_device(pdev)))
 528                 return err;
 529
 530         if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
 531                 pci_using_dac = 1;
 532         } else {
 533                 if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
 534                         E1000_ERR("No usable DMA configuration, aborting\n");
 535                         return err;
 536                 }
 537                 pci_using_dac = 0;
 538         }
 539
 540         if((err = pci_request_regions(pdev, e1000_driver_name)))
 541                 return err;
 542
 543         pci_set_master(pdev);
 544
 545         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
 546         if(!netdev) {
 547                 err = -ENOMEM;
 548                 goto err_alloc_etherdev;
 549         }
 550
 551         SET_MODULE_OWNER(netdev);
 552         SET_NETDEV_DEV(netdev, &pdev->dev);
 553
 554         pci_set_drvdata(pdev, netdev);
 555         adapter = netdev_priv(netdev);
 556         adapter->netdev = netdev;
 557         adapter->pdev = pdev;
 558         adapter->hw.back = adapter;
 559         adapter->msg_enable = (1 << debug) - 1;
 560
 561         mmio_start = pci_resource_start(pdev, BAR_0);
 562         mmio_len = pci_resource_len(pdev, BAR_0);
 563
 564         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
 565         if(!adapter->hw.hw_addr) {
 566                 err = -EIO;
 567                 goto err_ioremap;
 568         }
 569
 570         for(i = BAR_1; i <= BAR_5; i++) {
 571                 if(pci_resource_len(pdev, i) == 0)
 572                         continue;
 573                 if(pci_resource_flags(pdev, i) & IORESOURCE_IO) {
 574                         adapter->hw.io_base = pci_resource_start(pdev, i);
 575                         break;
 576                 }
 577         }
 578
 579         netdev->open = &e1000_open;
 580         netdev->stop = &e1000_close;
 581         netdev->hard_start_xmit = &e1000_xmit_frame;
 582         netdev->get_stats = &e1000_get_stats;
 583         netdev->set_multicast_list = &e1000_set_multi;
 584         netdev->set_mac_address = &e1000_set_mac;
 585         netdev->change_mtu = &e1000_change_mtu;
 586         netdev->do_ioctl = &e1000_ioctl;
 587         e1000_set_ethtool_ops(netdev);
 588         netdev->tx_timeout = &e1000_tx_timeout;
 589         netdev->watchdog_timeo = 5 * HZ;
 590 #ifdef CONFIG_E1000_NAPI
 591         netdev->poll = &e1000_clean;
 592         netdev->weight = 64;
 593 #endif
 594         netdev->vlan_rx_register = e1000_vlan_rx_register;
 595         netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
 596         netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
 597 #ifdef CONFIG_NET_POLL_CONTROLLER
 598         netdev->poll_controller = e1000_netpoll;
 599 #endif
 600         strcpy(netdev->name, pci_name(pdev));
 601
 602         netdev->mem_start = mmio_start;
 603         netdev->mem_end = mmio_start + mmio_len;
 604         netdev->base_addr = adapter->hw.io_base;
 605
 606         adapter->bd_number = cards_found;
 607
 608         /* setup the private structure */
 609
 610         if((err = e1000_sw_init(adapter)))
 611                 goto err_sw_init;
 612
 613         if((err = e1000_check_phy_reset_block(&adapter->hw)))
 614                 DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 615
 616         if(adapter->hw.mac_type >= e1000_82543) {
 617                 netdev->features = NETIF_F_SG |
 618                                    NETIF_F_HW_CSUM |
 619                                    NETIF_F_HW_VLAN_TX |
 620                                    NETIF_F_HW_VLAN_RX |
 621                                    NETIF_F_HW_VLAN_FILTER;
 622         }
 623
 624 #ifdef NETIF_F_TSO
 625         if((adapter->hw.mac_type >= e1000_82544) &&
 626            (adapter->hw.mac_type != e1000_82547))
 627                 netdev->features |= NETIF_F_TSO;
 628
 629 #ifdef NETIF_F_TSO_IPV6
 630         if(adapter->hw.mac_type > e1000_82547_rev_2)
 631                 netdev->features |= NETIF_F_TSO_IPV6;
 632 #endif
 633 #endif
 634         if(pci_using_dac)
 635                 netdev->features |= NETIF_F_HIGHDMA;
 636
 637         /* hard_start_xmit is safe against parallel locking */
 638         netdev->features |= NETIF_F_LLTX;
 639
 640         adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
 641
 642         /* before reading the EEPROM, reset the controller to
 643          * put the device in a known good starting state */
 644
 645         e1000_reset_hw(&adapter->hw);
 646
 647         /* make sure the EEPROM is good */
 648
 649         if(e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
 650                 DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
 651                 err = -EIO;
 652                 goto err_eeprom;
 653         }
 654
 655         /* copy the MAC address out of the EEPROM */
 656
 657         if(e1000_read_mac_addr(&adapter->hw))
 658                 DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
 659         memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
 660         memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
 661
 662         if(!is_valid_ether_addr(netdev->perm_addr)) {
 663                 DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
 664                 err = -EIO;
 665                 goto err_eeprom;
 666         }
 667
 668         e1000_read_part_num(&adapter->hw, &(adapter->part_num));
 669
 670         e1000_get_bus_info(&adapter->hw);
 671
 672         init_timer(&adapter->tx_fifo_stall_timer);
 673         adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
 674         adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
 675
 676         init_timer(&adapter->watchdog_timer);
 677         adapter->watchdog_timer.function = &e1000_watchdog;
 678         adapter->watchdog_timer.data = (unsigned long) adapter;
 679
 680         INIT_WORK(&adapter->watchdog_task,
 681                 (void (*)(void *))e1000_watchdog_task, adapter);
 682
 683         init_timer(&adapter->phy_info_timer);
 684         adapter->phy_info_timer.function = &e1000_update_phy_info;
 685         adapter->phy_info_timer.data = (unsigned long) adapter;
 686
 687         INIT_WORK(&adapter->tx_timeout_task,
 688                 (void (*)(void *))e1000_tx_timeout_task, netdev);
 689
 690         /* we're going to reset, so assume we have no link for now */
 691
 692         netif_carrier_off(netdev);
 693         netif_stop_queue(netdev);
 694
 695         e1000_check_options(adapter);
 696
 697         /* Initial Wake on LAN setting
 698          * If APM wake is enabled in the EEPROM,
 699          * enable the ACPI Magic Packet filter
 700          */
 701
 702         switch(adapter->hw.mac_type) {
 703         case e1000_82542_rev2_0:
 704         case e1000_82542_rev2_1:
 705         case e1000_82543:
 706                 break;
 707         case e1000_82544:
 708                 e1000_read_eeprom(&adapter->hw,
 709                         EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 710                 eeprom_apme_mask = E1000_EEPROM_82544_APM;
 711                 break;
 712         case e1000_82546:
 713         case e1000_82546_rev_3:
 714                 if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
 715                    && (adapter->hw.media_type == e1000_media_type_copper)) {
 716                         e1000_read_eeprom(&adapter->hw,
 717                                 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
 718                         break;
 719                 }
 720                 /* Fall Through */
 721         default:
 722                 e1000_read_eeprom(&adapter->hw,
 723                         EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
 724                 break;
 725         }
 726         if(eeprom_data & eeprom_apme_mask)
 727                 adapter->wol |= E1000_WUFC_MAG;
 728
 729         /* reset the hardware with the new settings */
 730         e1000_reset(adapter);
 731
 732         /* Let firmware know the driver has taken over */
 733         switch(adapter->hw.mac_type) {
 734         case e1000_82571:
 735         case e1000_82572:
 736                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 737                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 738                                 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 739                 break;
 740         case e1000_82573:
 741                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 742                 E1000_WRITE_REG(&adapter->hw, SWSM,
 743                                 swsm | E1000_SWSM_DRV_LOAD);
 744                 break;
 745         default:
 746                 break;
 747         }
 748
 749         strcpy(netdev->name, "eth%d");
 750         if((err = register_netdev(netdev)))
 751                 goto err_register;
 752
 753         DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
 754
 755         cards_found++;
 756         return 0;
 757
 758 err_register:
 759 err_sw_init:
 760 err_eeprom:
 761         iounmap(adapter->hw.hw_addr);
 762 err_ioremap:
 763         free_netdev(netdev);
 764 err_alloc_etherdev:
 765         pci_release_regions(pdev);
 766         return err;
 767 }
 768
 769 /**
 770  * e1000_remove - Device Removal Routine
 771  * @pdev: PCI device information struct
 772  *
 773  * e1000_remove is called by the PCI subsystem to alert the driver
 774  * that it should release a PCI device.  The could be caused by a
 775  * Hot-Plug event, or because the driver is going to be removed from
 776  * memory.
 777  **/
 778
 779 static void __devexit
 780 e1000_remove(struct pci_dev *pdev)
 781 {
 782         struct net_device *netdev = pci_get_drvdata(pdev);
 783         struct e1000_adapter *adapter = netdev_priv(netdev);
 784         uint32_t ctrl_ext;
 785         uint32_t manc, swsm;
 786 #ifdef CONFIG_E1000_NAPI
 787         int i;
 788 #endif
 789
 790         flush_scheduled_work();
 791
 792         if(adapter->hw.mac_type >= e1000_82540 &&
 793            adapter->hw.media_type == e1000_media_type_copper) {
 794                 manc = E1000_READ_REG(&adapter->hw, MANC);
 795                 if(manc & E1000_MANC_SMBUS_EN) {
 796                         manc |= E1000_MANC_ARP_EN;
 797                         E1000_WRITE_REG(&adapter->hw, MANC, manc);
 798                 }
 799         }
 800
 801         switch(adapter->hw.mac_type) {
 802         case e1000_82571:
 803         case e1000_82572:
 804                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 805                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 806                                 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 807                 break;
 808         case e1000_82573:
 809                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 810                 E1000_WRITE_REG(&adapter->hw, SWSM,
 811                                 swsm & ~E1000_SWSM_DRV_LOAD);
 812                 break;
 813
 814         default:
 815                 break;
 816         }
 817
 818         unregister_netdev(netdev);
 819 #ifdef CONFIG_E1000_NAPI
 820         for (i = 0; i < adapter->num_queues; i++)
 821                 __dev_put(&adapter->polling_netdev[i]);
 822 #endif
 823
 824         if(!e1000_check_phy_reset_block(&adapter->hw))
 825                 e1000_phy_hw_reset(&adapter->hw);
 826
 827         kfree(adapter->tx_ring);
 828         kfree(adapter->rx_ring);
 829 #ifdef CONFIG_E1000_NAPI
 830         kfree(adapter->polling_netdev);
 831 #endif
 832
 833         iounmap(adapter->hw.hw_addr);
 834         pci_release_regions(pdev);
 835
 836 #ifdef CONFIG_E1000_MQ
 837         free_percpu(adapter->cpu_netdev);
 838         free_percpu(adapter->cpu_tx_ring);
 839 #endif
 840         free_netdev(netdev);
 841
 842         pci_disable_device(pdev);
 843 }
 844
 845 /**
 846  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
 847  * @adapter: board private structure to initialize
 848  *
 849  * e1000_sw_init initializes the Adapter private data structure.
 850  * Fields are initialized based on PCI device information and
 851  * OS network device settings (MTU size).
 852  **/
 853
 854 static int __devinit
 855 e1000_sw_init(struct e1000_adapter *adapter)
 856 {
 857         struct e1000_hw *hw = &adapter->hw;
 858         struct net_device *netdev = adapter->netdev;
 859         struct pci_dev *pdev = adapter->pdev;
 860 #ifdef CONFIG_E1000_NAPI
 861         int i;
 862 #endif
 863
 864         /* PCI config space info */
 865
 866         hw->vendor_id = pdev->vendor;
 867         hw->device_id = pdev->device;
 868         hw->subsystem_vendor_id = pdev->subsystem_vendor;
 869         hw->subsystem_id = pdev->subsystem_device;
 870
 871         pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
 872
 873         pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
 874
 875         adapter->rx_buffer_len = E1000_RXBUFFER_2048;
 876         adapter->rx_ps_bsize0 = E1000_RXBUFFER_256;
 877         hw->max_frame_size = netdev->mtu +
 878                              ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
 879         hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
 880
 881         /* identify the MAC */
 882
 883         if(e1000_set_mac_type(hw)) {
 884                 DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
 885                 return -EIO;
 886         }
 887
 888         /* initialize eeprom parameters */
 889
 890         if(e1000_init_eeprom_params(hw)) {
 891                 E1000_ERR("EEPROM initialization failed\n");
 892                 return -EIO;
 893         }
 894
 895         switch(hw->mac_type) {
 896         default:
 897                 break;
 898         case e1000_82541:
 899         case e1000_82547:
 900         case e1000_82541_rev_2:
 901         case e1000_82547_rev_2:
 902                 hw->phy_init_script = 1;
 903                 break;
 904         }
 905
 906         e1000_set_media_type(hw);
 907
 908         hw->wait_autoneg_complete = FALSE;
 909         hw->tbi_compatibility_en = TRUE;
 910         hw->adaptive_ifs = TRUE;
 911
 912         /* Copper options */
 913
 914         if(hw->media_type == e1000_media_type_copper) {
 915                 hw->mdix = AUTO_ALL_MODES;
 916                 hw->disable_polarity_correction = FALSE;
 917                 hw->master_slave = E1000_MASTER_SLAVE;
 918         }
 919
 920 #ifdef CONFIG_E1000_MQ
 921         /* Number of supported queues */
 922         switch (hw->mac_type) {
 923         case e1000_82571:
 924         case e1000_82572:
 925                 adapter->num_queues = 2;
 926                 break;
 927         default:
 928                 adapter->num_queues = 1;
 929                 break;
 930         }
 931         adapter->num_queues = min(adapter->num_queues, num_online_cpus());
 932 #else
 933         adapter->num_queues = 1;
 934 #endif
 935
 936         if (e1000_alloc_queues(adapter)) {
 937                 DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
 938                 return -ENOMEM;
 939         }
 940
 941 #ifdef CONFIG_E1000_NAPI
 942         for (i = 0; i < adapter->num_queues; i++) {
 943                 adapter->polling_netdev[i].priv = adapter;
 944                 adapter->polling_netdev[i].poll = &e1000_clean;
 945                 adapter->polling_netdev[i].weight = 64;
 946                 dev_hold(&adapter->polling_netdev[i]);
 947                 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
 948         }
 949 #endif
 950
 951 #ifdef CONFIG_E1000_MQ
 952         e1000_setup_queue_mapping(adapter);
 953 #endif
 954
 955         atomic_set(&adapter->irq_sem, 1);
 956         spin_lock_init(&adapter->stats_lock);
 957
 958         return 0;
 959 }
 960
 961 /**
 962  * e1000_alloc_queues - Allocate memory for all rings
 963  * @adapter: board private structure to initialize
 964  *
 965  * We allocate one ring per queue at run-time since we don't know the
 966  * number of queues at compile-time.  The polling_netdev array is
 967  * intended for Multiqueue, but should work fine with a single queue.
 968  **/
 969
 970 static int __devinit
 971 e1000_alloc_queues(struct e1000_adapter *adapter)
 972 {
 973         int size;
 974
 975         size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
 976         adapter->tx_ring = kmalloc(size, GFP_KERNEL);
 977         if (!adapter->tx_ring)
 978                 return -ENOMEM;
 979         memset(adapter->tx_ring, 0, size);
 980
 981         size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
 982         adapter->rx_ring = kmalloc(size, GFP_KERNEL);
 983         if (!adapter->rx_ring) {
 984                 kfree(adapter->tx_ring);
 985                 return -ENOMEM;
 986         }
 987         memset(adapter->rx_ring, 0, size);
 988
 989 #ifdef CONFIG_E1000_NAPI
 990         size = sizeof(struct net_device) * adapter->num_queues;
 991         adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
 992         if (!adapter->polling_netdev) {
 993                 kfree(adapter->tx_ring);
 994                 kfree(adapter->rx_ring);
 995                 return -ENOMEM;
 996         }
 997         memset(adapter->polling_netdev, 0, size);
 998 #endif
 999
1000         return E1000_SUCCESS;
1001 }
1002
1003 #ifdef CONFIG_E1000_MQ
1004 static void __devinit
1005 e1000_setup_queue_mapping(struct e1000_adapter *adapter)
1006 {
1007         int i, cpu;
1008
1009         adapter->rx_sched_call_data.func = e1000_rx_schedule;
1010         adapter->rx_sched_call_data.info = adapter->netdev;
1011         cpus_clear(adapter->rx_sched_call_data.cpumask);
1012
1013         adapter->cpu_netdev = alloc_percpu(struct net_device *);
1014         adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *);
1015
1016         lock_cpu_hotplug();
1017         i = 0;
1018         for_each_online_cpu(cpu) {
1019                 *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues];
1020                 /* This is incomplete because we'd like to assign separate
1021                  * physical cpus to these netdev polling structures and
1022                  * avoid saturating a subset of cpus.
1023                  */
1024                 if (i < adapter->num_queues) {
1025                         *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i];
1026                         adapter->cpu_for_queue[i] = cpu;
1027                 } else
1028                         *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
1029
1030                 i++;
1031         }
1032         unlock_cpu_hotplug();
1033 }
1034 #endif
1035
1036 /**
1037  * e1000_open - Called when a network interface is made active
1038  * @netdev: network interface device structure
1039  *
1040  * Returns 0 on success, negative value on failure
1041  *
1042  * The open entry point is called when a network interface is made
1043  * active by the system (IFF_UP).  At this point all resources needed
1044  * for transmit and receive operations are allocated, the interrupt
1045  * handler is registered with the OS, the watchdog timer is started,
1046  * and the stack is notified that the interface is ready.
1047  **/
1048
1049 static int
1050 e1000_open(struct net_device *netdev)
1051 {
1052         struct e1000_adapter *adapter = netdev_priv(netdev);
1053         int err;
1054
1055         /* allocate transmit descriptors */
1056
1057         if ((err = e1000_setup_all_tx_resources(adapter)))
1058                 goto err_setup_tx;
1059
1060         /* allocate receive descriptors */
1061
1062         if ((err = e1000_setup_all_rx_resources(adapter)))
1063                 goto err_setup_rx;
1064
1065         if((err = e1000_up(adapter)))
1066                 goto err_up;
1067         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1068         if((adapter->hw.mng_cookie.status &
1069                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1070                 e1000_update_mng_vlan(adapter);
1071         }
1072
1073         return E1000_SUCCESS;
1074
1075 err_up:
1076         e1000_free_all_rx_resources(adapter);
1077 err_setup_rx:
1078         e1000_free_all_tx_resources(adapter);
1079 err_setup_tx:
1080         e1000_reset(adapter);
1081
1082         return err;
1083 }
1084
1085 /**
1086  * e1000_close - Disables a network interface
1087  * @netdev: network interface device structure
1088  *
1089  * Returns 0, this is not allowed to fail
1090  *
1091  * The close entry point is called when an interface is de-activated
1092  * by the OS.  The hardware is still under the drivers control, but
1093  * needs to be disabled.  A global MAC reset is issued to stop the
1094  * hardware, and all transmit and receive resources are freed.
1095  **/
1096
1097 static int
1098 e1000_close(struct net_device *netdev)
1099 {
1100         struct e1000_adapter *adapter = netdev_priv(netdev);
1101
1102         e1000_down(adapter);
1103
1104         e1000_free_all_tx_resources(adapter);
1105         e1000_free_all_rx_resources(adapter);
1106
1107         if((adapter->hw.mng_cookie.status &
1108                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1109                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1110         }
1111         return 0;
1112 }
1113
1114 /**
1115  * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1116  * @adapter: address of board private structure
1117  * @start: address of beginning of memory
1118  * @len: length of memory
1119  **/
1120 static inline boolean_t
1121 e1000_check_64k_bound(struct e1000_adapter *adapter,
1122                       void *start, unsigned long len)
1123 {
1124         unsigned long begin = (unsigned long) start;
1125         unsigned long end = begin + len;
1126
1127         /* First rev 82545 and 82546 need to not allow any memory
1128          * write location to cross 64k boundary due to errata 23 */
1129         if (adapter->hw.mac_type == e1000_82545 ||
1130             adapter->hw.mac_type == e1000_82546) {
1131                 return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
1132         }
1133
1134         return TRUE;
1135 }
1136
1137 /**
1138  * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1139  * @adapter: board private structure
1140  * @txdr:    tx descriptor ring (for a specific queue) to setup
1141  *
1142  * Return 0 on success, negative on failure
1143  **/
1144
1145 static int
1146 e1000_setup_tx_resources(struct e1000_adapter *adapter,
1147                          struct e1000_tx_ring *txdr)
1148 {
1149         struct pci_dev *pdev = adapter->pdev;
1150         int size;
1151
1152         size = sizeof(struct e1000_buffer) * txdr->count;
1153
1154         txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
1155         if(!txdr->buffer_info) {
1156                 DPRINTK(PROBE, ERR,
1157                 "Unable to allocate memory for the transmit descriptor ring\n");
1158                 return -ENOMEM;
1159         }
1160         memset(txdr->buffer_info, 0, size);
1161         memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer));
1162
1163         /* round up to nearest 4K */
1164
1165         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1166         E1000_ROUNDUP(txdr->size, 4096);
1167
1168         txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1169         if(!txdr->desc) {
1170 setup_tx_desc_die:
1171                 vfree(txdr->buffer_info);
1172                 DPRINTK(PROBE, ERR,
1173                 "Unable to allocate memory for the transmit descriptor ring\n");
1174                 return -ENOMEM;
1175         }
1176
1177         /* Fix for errata 23, can't cross 64kB boundary */
1178         if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1179                 void *olddesc = txdr->desc;
1180                 dma_addr_t olddma = txdr->dma;
1181                 DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
1182                                      "at %p\n", txdr->size, txdr->desc);
1183                 /* Try again, without freeing the previous */
1184                 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1185                 if(!txdr->desc) {
1186                 /* Failed allocation, critical failure */
1187                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1188                         goto setup_tx_desc_die;
1189                 }
1190
1191                 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1192                         /* give up */
1193                         pci_free_consistent(pdev, txdr->size, txdr->desc,
1194                                             txdr->dma);
1195                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1196                         DPRINTK(PROBE, ERR,
1197                                 "Unable to allocate aligned memory "
1198                                 "for the transmit descriptor ring\n");
1199                         vfree(txdr->buffer_info);
1200                         return -ENOMEM;
1201                 } else {
1202                         /* Free old allocation, new allocation was successful */
1203                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1204                 }
1205         }
1206         memset(txdr->desc, 0, txdr->size);
1207
1208         txdr->next_to_use = 0;
1209         txdr->next_to_clean = 0;
1210         spin_lock_init(&txdr->tx_lock);
1211
1212         return 0;
1213 }
1214
1215 /**
1216  * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1217  *                                (Descriptors) for all queues
1218  * @adapter: board private structure
1219  *
1220  * If this function returns with an error, then it's possible one or
1221  * more of the rings is populated (while the rest are not).  It is the
1222  * callers duty to clean those orphaned rings.
1223  *
1224  * Return 0 on success, negative on failure
1225  **/
1226
1227 int
1228 e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1229 {
1230         int i, err = 0;
1231
1232         for (i = 0; i < adapter->num_queues; i++) {
1233                 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1234                 if (err) {
1235                         DPRINTK(PROBE, ERR,
1236                                 "Allocation for Tx Queue %u failed\n", i);
1237                         break;
1238                 }
1239         }
1240
1241         return err;
1242 }
1243
1244 /**
1245  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1246  * @adapter: board private structure
1247  *
1248  * Configure the Tx unit of the MAC after a reset.
1249  **/
1250
1251 static void
1252 e1000_configure_tx(struct e1000_adapter *adapter)
1253 {
1254         uint64_t tdba;
1255         struct e1000_hw *hw = &adapter->hw;
1256         uint32_t tdlen, tctl, tipg, tarc;
1257
1258         /* Setup the HW Tx Head and Tail descriptor pointers */
1259
1260         switch (adapter->num_queues) {
1261         case 2:
1262                 tdba = adapter->tx_ring[1].dma;
1263                 tdlen = adapter->tx_ring[1].count *
1264                         sizeof(struct e1000_tx_desc);
1265                 E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
1266                 E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32));
1267                 E1000_WRITE_REG(hw, TDLEN1, tdlen);
1268                 E1000_WRITE_REG(hw, TDH1, 0);
1269                 E1000_WRITE_REG(hw, TDT1, 0);
1270                 adapter->tx_ring[1].tdh = E1000_TDH1;
1271                 adapter->tx_ring[1].tdt = E1000_TDT1;
1272                 /* Fall Through */
1273         case 1:
1274         default:
1275                 tdba = adapter->tx_ring[0].dma;
1276                 tdlen = adapter->tx_ring[0].count *
1277                         sizeof(struct e1000_tx_desc);
1278                 E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
1279                 E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
1280                 E1000_WRITE_REG(hw, TDLEN, tdlen);
1281                 E1000_WRITE_REG(hw, TDH, 0);
1282                 E1000_WRITE_REG(hw, TDT, 0);
1283                 adapter->tx_ring[0].tdh = E1000_TDH;
1284                 adapter->tx_ring[0].tdt = E1000_TDT;
1285                 break;
1286         }
1287
1288         /* Set the default values for the Tx Inter Packet Gap timer */
1289
1290         switch (hw->mac_type) {
1291         case e1000_82542_rev2_0:
1292         case e1000_82542_rev2_1:
1293                 tipg = DEFAULT_82542_TIPG_IPGT;
1294                 tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
1295                 tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
1296                 break;
1297         default:
1298                 if (hw->media_type == e1000_media_type_fiber ||
1299                     hw->media_type == e1000_media_type_internal_serdes)
1300                         tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1301                 else
1302                         tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1303                 tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
1304                 tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
1305         }
1306         E1000_WRITE_REG(hw, TIPG, tipg);
1307
1308         /* Set the Tx Interrupt Delay register */
1309
1310         E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
1311         if (hw->mac_type >= e1000_82540)
1312                 E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
1313
1314         /* Program the Transmit Control Register */
1315
1316         tctl = E1000_READ_REG(hw, TCTL);
1317
1318         tctl &= ~E1000_TCTL_CT;
1319         tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
1320                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1321
1322         E1000_WRITE_REG(hw, TCTL, tctl);
1323
1324         if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
1325                 tarc = E1000_READ_REG(hw, TARC0);
1326                 tarc |= ((1 << 25) | (1 << 21));
1327                 E1000_WRITE_REG(hw, TARC0, tarc);
1328                 tarc = E1000_READ_REG(hw, TARC1);
1329                 tarc |= (1 << 25);
1330                 if (tctl & E1000_TCTL_MULR)
1331                         tarc &= ~(1 << 28);
1332                 else
1333                         tarc |= (1 << 28);
1334                 E1000_WRITE_REG(hw, TARC1, tarc);
1335         }
1336
1337         e1000_config_collision_dist(hw);
1338
1339         /* Setup Transmit Descriptor Settings for eop descriptor */
1340         adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
1341                 E1000_TXD_CMD_IFCS;
1342
1343         if (hw->mac_type < e1000_82543)
1344                 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1345         else
1346                 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1347
1348         /* Cache if we're 82544 running in PCI-X because we'll
1349          * need this to apply a workaround later in the send path. */
1350         if (hw->mac_type == e1000_82544 &&
1351             hw->bus_type == e1000_bus_type_pcix)
1352                 adapter->pcix_82544 = 1;
1353 }
1354
1355 /**
1356  * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1357  * @adapter: board private structure
1358  * @rxdr:    rx descriptor ring (for a specific queue) to setup
1359  *
1360  * Returns 0 on success, negative on failure
1361  **/
1362
1363 static int
1364 e1000_setup_rx_resources(struct e1000_adapter *adapter,
1365                          struct e1000_rx_ring *rxdr)
1366 {
1367         struct pci_dev *pdev = adapter->pdev;
1368         int size, desc_len;
1369
1370         size = sizeof(struct e1000_buffer) * rxdr->count;
1371         rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
1372         if (!rxdr->buffer_info) {
1373                 DPRINTK(PROBE, ERR,
1374                 "Unable to allocate memory for the receive descriptor ring\n");
1375                 return -ENOMEM;
1376         }
1377         memset(rxdr->buffer_info, 0, size);
1378
1379         size = sizeof(struct e1000_ps_page) * rxdr->count;
1380         rxdr->ps_page = kmalloc(size, GFP_KERNEL);
1381         if(!rxdr->ps_page) {
1382                 vfree(rxdr->buffer_info);
1383                 DPRINTK(PROBE, ERR,
1384                 "Unable to allocate memory for the receive descriptor ring\n");
1385                 return -ENOMEM;
1386         }
1387         memset(rxdr->ps_page, 0, size);
1388
1389         size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
1390         rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
1391         if(!rxdr->ps_page_dma) {
1392                 vfree(rxdr->buffer_info);
1393                 kfree(rxdr->ps_page);
1394                 DPRINTK(PROBE, ERR,
1395                 "Unable to allocate memory for the receive descriptor ring\n");
1396                 return -ENOMEM;
1397         }
1398         memset(rxdr->ps_page_dma, 0, size);
1399
1400         if(adapter->hw.mac_type <= e1000_82547_rev_2)
1401                 desc_len = sizeof(struct e1000_rx_desc);
1402         else
1403                 desc_len = sizeof(union e1000_rx_desc_packet_split);
1404
1405         /* Round up to nearest 4K */
1406
1407         rxdr->size = rxdr->count * desc_len;
1408         E1000_ROUNDUP(rxdr->size, 4096);
1409
1410         rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1411
1412         if (!rxdr->desc) {
1413                 DPRINTK(PROBE, ERR,
1414                 "Unable to allocate memory for the receive descriptor ring\n");
1415 setup_rx_desc_die:
1416                 vfree(rxdr->buffer_info);
1417                 kfree(rxdr->ps_page);
1418                 kfree(rxdr->ps_page_dma);
1419                 return -ENOMEM;
1420         }
1421
1422         /* Fix for errata 23, can't cross 64kB boundary */
1423         if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1424                 void *olddesc = rxdr->desc;
1425                 dma_addr_t olddma = rxdr->dma;
1426                 DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
1427                                      "at %p\n", rxdr->size, rxdr->desc);
1428                 /* Try again, without freeing the previous */
1429                 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1430                 /* Failed allocation, critical failure */
1431                 if (!rxdr->desc) {
1432                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1433                         DPRINTK(PROBE, ERR,
1434                                 "Unable to allocate memory "
1435                                 "for the receive descriptor ring\n");
1436                         goto setup_rx_desc_die;
1437                 }
1438
1439                 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1440                         /* give up */
1441                         pci_free_consistent(pdev, rxdr->size, rxdr->desc,
1442                                             rxdr->dma);
1443                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1444                         DPRINTK(PROBE, ERR,
1445                                 "Unable to allocate aligned memory "
1446                                 "for the receive descriptor ring\n");
1447                         goto setup_rx_desc_die;
1448                 } else {
1449                         /* Free old allocation, new allocation was successful */
1450                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1451                 }
1452         }
1453         memset(rxdr->desc, 0, rxdr->size);
1454
1455         rxdr->next_to_clean = 0;
1456         rxdr->next_to_use = 0;
1457
1458         return 0;
1459 }
1460
1461 /**
1462  * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1463  *                                (Descriptors) for all queues
1464  * @adapter: board private structure
1465  *
1466  * If this function returns with an error, then it's possible one or
1467  * more of the rings is populated (while the rest are not).  It is the
1468  * callers duty to clean those orphaned rings.
1469  *
1470  * Return 0 on success, negative on failure
1471  **/
1472
1473 int
1474 e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1475 {
1476         int i, err = 0;
1477
1478         for (i = 0; i < adapter->num_queues; i++) {
1479                 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1480                 if (err) {
1481                         DPRINTK(PROBE, ERR,
1482                                 "Allocation for Rx Queue %u failed\n", i);
1483                         break;
1484                 }
1485         }
1486
1487         return err;
1488 }
1489
1490 /**
1491  * e1000_setup_rctl - configure the receive control registers
1492  * @adapter: Board private structure
1493  **/
1494 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1495                         (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1496 static void
1497 e1000_setup_rctl(struct e1000_adapter *adapter)
1498 {
1499         uint32_t rctl, rfctl;
1500         uint32_t psrctl = 0;
1501 #ifdef CONFIG_E1000_PACKET_SPLIT
1502         uint32_t pages = 0;
1503 #endif
1504
1505         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1506
1507         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1508
1509         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1510                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1511                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1512
1513         if(adapter->hw.tbi_compatibility_on == 1)
1514                 rctl |= E1000_RCTL_SBP;
1515         else
1516                 rctl &= ~E1000_RCTL_SBP;
1517
1518         if (adapter->netdev->mtu <= ETH_DATA_LEN)
1519                 rctl &= ~E1000_RCTL_LPE;
1520         else
1521                 rctl |= E1000_RCTL_LPE;
1522
1523         /* Setup buffer sizes */
1524         if(adapter->hw.mac_type >= e1000_82571) {
1525                 /* We can now specify buffers in 1K increments.
1526                  * BSIZE and BSEX are ignored in this case. */
1527                 rctl |= adapter->rx_buffer_len << 0x11;
1528         } else {
1529                 rctl &= ~E1000_RCTL_SZ_4096;
1530                 rctl |= E1000_RCTL_BSEX;
1531                 switch (adapter->rx_buffer_len) {
1532                 case E1000_RXBUFFER_2048:
1533                 default:
1534                         rctl |= E1000_RCTL_SZ_2048;
1535                         rctl &= ~E1000_RCTL_BSEX;
1536                         break;
1537                 case E1000_RXBUFFER_4096:
1538                         rctl |= E1000_RCTL_SZ_4096;
1539                         break;
1540                 case E1000_RXBUFFER_8192:
1541                         rctl |= E1000_RCTL_SZ_8192;
1542                         break;
1543                 case E1000_RXBUFFER_16384:
1544                         rctl |= E1000_RCTL_SZ_16384;
1545                         break;
1546                 }
1547         }
1548
1549 #ifdef CONFIG_E1000_PACKET_SPLIT
1550         /* 82571 and greater support packet-split where the protocol
1551          * header is placed in skb->data and the packet data is
1552          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
1553          * In the case of a non-split, skb->data is linearly filled,
1554          * followed by the page buffers.  Therefore, skb->data is
1555          * sized to hold the largest protocol header.
1556          */
1557         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
1558         if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) &&
1559             PAGE_SIZE <= 16384)
1560                 adapter->rx_ps_pages = pages;
1561         else
1562                 adapter->rx_ps_pages = 0;
1563 #endif
1564         if (adapter->rx_ps_pages) {
1565                 /* Configure extra packet-split registers */
1566                 rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
1567                 rfctl |= E1000_RFCTL_EXTEN;
1568                 /* disable IPv6 packet split support */
1569                 rfctl |= E1000_RFCTL_IPV6_DIS;
1570                 E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
1571
1572                 rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
1573
1574                 psrctl |= adapter->rx_ps_bsize0 >>
1575                         E1000_PSRCTL_BSIZE0_SHIFT;
1576
1577                 switch (adapter->rx_ps_pages) {
1578                 case 3:
1579                         psrctl |= PAGE_SIZE <<
1580                                 E1000_PSRCTL_BSIZE3_SHIFT;
1581                 case 2:
1582                         psrctl |= PAGE_SIZE <<
1583                                 E1000_PSRCTL_BSIZE2_SHIFT;
1584                 case 1:
1585                         psrctl |= PAGE_SIZE >>
1586                                 E1000_PSRCTL_BSIZE1_SHIFT;
1587                         break;
1588                 }
1589
1590                 E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
1591         }
1592
1593         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1594 }
1595
1596 /**
1597  * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1598  * @adapter: board private structure
1599  *
1600  * Configure the Rx unit of the MAC after a reset.
1601  **/
1602
1603 static void
1604 e1000_configure_rx(struct e1000_adapter *adapter)
1605 {
1606         uint64_t rdba;
1607         struct e1000_hw *hw = &adapter->hw;
1608         uint32_t rdlen, rctl, rxcsum, ctrl_ext;
1609 #ifdef CONFIG_E1000_MQ
1610         uint32_t reta, mrqc;
1611         int i;
1612 #endif
1613
1614         if (adapter->rx_ps_pages) {
1615                 rdlen = adapter->rx_ring[0].count *
1616                         sizeof(union e1000_rx_desc_packet_split);
1617                 adapter->clean_rx = e1000_clean_rx_irq_ps;
1618                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
1619         } else {
1620                 rdlen = adapter->rx_ring[0].count *
1621                         sizeof(struct e1000_rx_desc);
1622                 adapter->clean_rx = e1000_clean_rx_irq;
1623                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
1624         }
1625
1626         /* disable receives while setting up the descriptors */
1627         rctl = E1000_READ_REG(hw, RCTL);
1628         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
1629
1630         /* set the Receive Delay Timer Register */
1631         E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
1632
1633         if (hw->mac_type >= e1000_82540) {
1634                 E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
1635                 if(adapter->itr > 1)
1636                         E1000_WRITE_REG(hw, ITR,
1637                                 1000000000 / (adapter->itr * 256));
1638         }
1639
1640         if (hw->mac_type >= e1000_82571) {
1641                 /* Reset delay timers after every interrupt */
1642                 ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
1643                 ctrl_ext |= E1000_CTRL_EXT_CANC;
1644                 E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
1645                 E1000_WRITE_FLUSH(hw);
1646         }
1647
1648         /* Setup the HW Rx Head and Tail Descriptor Pointers and
1649          * the Base and Length of the Rx Descriptor Ring */
1650         switch (adapter->num_queues) {
1651 #ifdef CONFIG_E1000_MQ
1652         case 2:
1653                 rdba = adapter->rx_ring[1].dma;
1654                 E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
1655                 E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32));
1656                 E1000_WRITE_REG(hw, RDLEN1, rdlen);
1657                 E1000_WRITE_REG(hw, RDH1, 0);
1658                 E1000_WRITE_REG(hw, RDT1, 0);
1659                 adapter->rx_ring[1].rdh = E1000_RDH1;
1660                 adapter->rx_ring[1].rdt = E1000_RDT1;
1661                 /* Fall Through */
1662 #endif
1663         case 1:
1664         default:
1665                 rdba = adapter->rx_ring[0].dma;
1666                 E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
1667                 E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
1668                 E1000_WRITE_REG(hw, RDLEN, rdlen);
1669                 E1000_WRITE_REG(hw, RDH, 0);
1670                 E1000_WRITE_REG(hw, RDT, 0);
1671                 adapter->rx_ring[0].rdh = E1000_RDH;
1672                 adapter->rx_ring[0].rdt = E1000_RDT;
1673                 break;
1674         }
1675
1676 #ifdef CONFIG_E1000_MQ
1677         if (adapter->num_queues > 1) {
1678                 uint32_t random[10];
1679
1680                 get_random_bytes(&random[0], 40);
1681
1682                 if (hw->mac_type <= e1000_82572) {
1683                         E1000_WRITE_REG(hw, RSSIR, 0);
1684                         E1000_WRITE_REG(hw, RSSIM, 0);
1685                 }
1686
1687                 switch (adapter->num_queues) {
1688                 case 2:
1689                 default:
1690                         reta = 0x00800080;
1691                         mrqc = E1000_MRQC_ENABLE_RSS_2Q;
1692                         break;
1693                 }
1694
1695                 /* Fill out redirection table */
1696                 for (i = 0; i < 32; i++)
1697                         E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
1698                 /* Fill out hash function seeds */
1699                 for (i = 0; i < 10; i++)
1700                         E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
1701
1702                 mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
1703                          E1000_MRQC_RSS_FIELD_IPV4_TCP);
1704                 E1000_WRITE_REG(hw, MRQC, mrqc);
1705         }
1706
1707         /* Multiqueue and packet checksumming are mutually exclusive. */
1708         if (hw->mac_type >= e1000_82571) {
1709                 rxcsum = E1000_READ_REG(hw, RXCSUM);
1710                 rxcsum |= E1000_RXCSUM_PCSD;
1711                 E1000_WRITE_REG(hw, RXCSUM, rxcsum);
1712         }
1713
1714 #else
1715
1716         /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1717         if (hw->mac_type >= e1000_82543) {
1718                 rxcsum = E1000_READ_REG(hw, RXCSUM);
1719                 if(adapter->rx_csum == TRUE) {
1720                         rxcsum |= E1000_RXCSUM_TUOFL;
1721
1722                         /* Enable 82571 IPv4 payload checksum for UDP fragments
1723                          * Must be used in conjunction with packet-split. */
1724                         if ((hw->mac_type >= e1000_82571) &&
1725                            (adapter->rx_ps_pages)) {
1726                                 rxcsum |= E1000_RXCSUM_IPPCSE;
1727                         }
1728                 } else {
1729                         rxcsum &= ~E1000_RXCSUM_TUOFL;
1730                         /* don't need to clear IPPCSE as it defaults to 0 */
1731                 }
1732                 E1000_WRITE_REG(hw, RXCSUM, rxcsum);
1733         }
1734 #endif /* CONFIG_E1000_MQ */
1735
1736         if (hw->mac_type == e1000_82573)
1737                 E1000_WRITE_REG(hw, ERT, 0x0100);
1738
1739         /* Enable Receives */
1740         E1000_WRITE_REG(hw, RCTL, rctl);
1741 }
1742
1743 /**
1744  * e1000_free_tx_resources - Free Tx Resources per Queue
1745  * @adapter: board private structure
1746  * @tx_ring: Tx descriptor ring for a specific queue
1747  *
1748  * Free all transmit software resources
1749  **/
1750
1751 static void
1752 e1000_free_tx_resources(struct e1000_adapter *adapter,
1753                         struct e1000_tx_ring *tx_ring)
1754 {
1755         struct pci_dev *pdev = adapter->pdev;
1756
1757         e1000_clean_tx_ring(adapter, tx_ring);
1758
1759         vfree(tx_ring->buffer_info);
1760         tx_ring->buffer_info = NULL;
1761
1762         pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
1763
1764         tx_ring->desc = NULL;
1765 }
1766
1767 /**
1768  * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1769  * @adapter: board private structure
1770  *
1771  * Free all transmit software resources
1772  **/
1773
1774 void
1775 e1000_free_all_tx_resources(struct e1000_adapter *adapter)
1776 {
1777         int i;
1778
1779         for (i = 0; i < adapter->num_queues; i++)
1780                 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
1781 }
1782
1783 static inline void
1784 e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
1785                         struct e1000_buffer *buffer_info)
1786 {
1787         if(buffer_info->dma) {
1788                 pci_unmap_page(adapter->pdev,
1789                                 buffer_info->dma,
1790                                 buffer_info->length,
1791                                 PCI_DMA_TODEVICE);
1792                 buffer_info->dma = 0;
1793         }
1794         if(buffer_info->skb) {
1795                 dev_kfree_skb_any(buffer_info->skb);
1796                 buffer_info->skb = NULL;
1797         }
1798 }
1799
1800 /**
1801  * e1000_clean_tx_ring - Free Tx Buffers
1802  * @adapter: board private structure
1803  * @tx_ring: ring to be cleaned
1804  **/
1805
1806 static void
1807 e1000_clean_tx_ring(struct e1000_adapter *adapter,
1808                     struct e1000_tx_ring *tx_ring)
1809 {
1810         struct e1000_buffer *buffer_info;
1811         unsigned long size;
1812         unsigned int i;
1813
1814         /* Free all the Tx ring sk_buffs */
1815
1816         if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
1817                 e1000_unmap_and_free_tx_resource(adapter,
1818                                 &tx_ring->previous_buffer_info);
1819         }
1820
1821         for(i = 0; i < tx_ring->count; i++) {
1822                 buffer_info = &tx_ring->buffer_info[i];
1823                 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
1824         }
1825
1826         size = sizeof(struct e1000_buffer) * tx_ring->count;
1827         memset(tx_ring->buffer_info, 0, size);
1828
1829         /* Zero out the descriptor ring */
1830
1831         memset(tx_ring->desc, 0, tx_ring->size);
1832
1833         tx_ring->next_to_use = 0;
1834         tx_ring->next_to_clean = 0;
1835
1836         writel(0, adapter->hw.hw_addr + tx_ring->tdh);
1837         writel(0, adapter->hw.hw_addr + tx_ring->tdt);
1838 }
1839
1840 /**
1841  * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
1842  * @adapter: board private structure
1843  **/
1844
1845 static void
1846 e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
1847 {
1848         int i;
1849
1850         for (i = 0; i < adapter->num_queues; i++)
1851                 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
1852 }
1853
1854 /**
1855  * e1000_free_rx_resources - Free Rx Resources
1856  * @adapter: board private structure
1857  * @rx_ring: ring to clean the resources from
1858  *
1859  * Free all receive software resources
1860  **/
1861
1862 static void
1863 e1000_free_rx_resources(struct e1000_adapter *adapter,
1864                         struct e1000_rx_ring *rx_ring)
1865 {
1866         struct pci_dev *pdev = adapter->pdev;
1867
1868         e1000_clean_rx_ring(adapter, rx_ring);
1869
1870         vfree(rx_ring->buffer_info);
1871         rx_ring->buffer_info = NULL;
1872         kfree(rx_ring->ps_page);
1873         rx_ring->ps_page = NULL;
1874         kfree(rx_ring->ps_page_dma);
1875         rx_ring->ps_page_dma = NULL;
1876
1877         pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
1878
1879         rx_ring->desc = NULL;
1880 }
1881
1882 /**
1883  * e1000_free_all_rx_resources - Free Rx Resources for All Queues
1884  * @adapter: board private structure
1885  *
1886  * Free all receive software resources
1887  **/
1888
1889 void
1890 e1000_free_all_rx_resources(struct e1000_adapter *adapter)
1891 {
1892         int i;
1893
1894         for (i = 0; i < adapter->num_queues; i++)
1895                 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
1896 }
1897
1898 /**
1899  * e1000_clean_rx_ring - Free Rx Buffers per Queue
1900  * @adapter: board private structure
1901  * @rx_ring: ring to free buffers from
1902  **/
1903
1904 static void
1905 e1000_clean_rx_ring(struct e1000_adapter *adapter,
1906                     struct e1000_rx_ring *rx_ring)
1907 {
1908         struct e1000_buffer *buffer_info;
1909         struct e1000_ps_page *ps_page;
1910         struct e1000_ps_page_dma *ps_page_dma;
1911         struct pci_dev *pdev = adapter->pdev;
1912         unsigned long size;
1913         unsigned int i, j;
1914
1915         /* Free all the Rx ring sk_buffs */
1916
1917         for(i = 0; i < rx_ring->count; i++) {
1918                 buffer_info = &rx_ring->buffer_info[i];
1919                 if(buffer_info->skb) {
1920                         ps_page = &rx_ring->ps_page[i];
1921                         ps_page_dma = &rx_ring->ps_page_dma[i];
1922                         pci_unmap_single(pdev,
1923                                          buffer_info->dma,
1924                                          buffer_info->length,
1925                                          PCI_DMA_FROMDEVICE);
1926
1927                         dev_kfree_skb(buffer_info->skb);
1928                         buffer_info->skb = NULL;
1929
1930                         for(j = 0; j < adapter->rx_ps_pages; j++) {
1931                                 if(!ps_page->ps_page[j]) break;
1932                                 pci_unmap_single(pdev,
1933                                                  ps_page_dma->ps_page_dma[j],
1934                                                  PAGE_SIZE, PCI_DMA_FROMDEVICE);
1935                                 ps_page_dma->ps_page_dma[j] = 0;
1936                                 put_page(ps_page->ps_page[j]);
1937                                 ps_page->ps_page[j] = NULL;
1938                         }
1939                 }
1940         }
1941
1942         size = sizeof(struct e1000_buffer) * rx_ring->count;
1943         memset(rx_ring->buffer_info, 0, size);
1944         size = sizeof(struct e1000_ps_page) * rx_ring->count;
1945         memset(rx_ring->ps_page, 0, size);
1946         size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
1947         memset(rx_ring->ps_page_dma, 0, size);
1948
1949         /* Zero out the descriptor ring */
1950
1951         memset(rx_ring->desc, 0, rx_ring->size);
1952
1953         rx_ring->next_to_clean = 0;
1954         rx_ring->next_to_use = 0;
1955
1956         writel(0, adapter->hw.hw_addr + rx_ring->rdh);
1957         writel(0, adapter->hw.hw_addr + rx_ring->rdt);
1958 }
1959
1960 /**
1961  * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
1962  * @adapter: board private structure
1963  **/
1964
1965 static void
1966 e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
1967 {
1968         int i;
1969
1970         for (i = 0; i < adapter->num_queues; i++)
1971                 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
1972 }
1973
1974 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
1975  * and memory write and invalidate disabled for certain operations
1976  */
1977 static void
1978 e1000_enter_82542_rst(struct e1000_adapter *adapter)
1979 {
1980         struct net_device *netdev = adapter->netdev;
1981         uint32_t rctl;
1982
1983         e1000_pci_clear_mwi(&adapter->hw);
1984
1985         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1986         rctl |= E1000_RCTL_RST;
1987         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1988         E1000_WRITE_FLUSH(&adapter->hw);
1989         mdelay(5);
1990
1991         if(netif_running(netdev))
1992                 e1000_clean_all_rx_rings(adapter);
1993 }
1994
1995 static void
1996 e1000_leave_82542_rst(struct e1000_adapter *adapter)
1997 {
1998         struct net_device *netdev = adapter->netdev;
1999         uint32_t rctl;
2000
2001         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2002         rctl &= ~E1000_RCTL_RST;
2003         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2004         E1000_WRITE_FLUSH(&adapter->hw);
2005         mdelay(5);
2006
2007         if(adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
2008                 e1000_pci_set_mwi(&adapter->hw);
2009
2010         if(netif_running(netdev)) {
2011                 e1000_configure_rx(adapter);
2012                 e1000_alloc_rx_buffers(adapter, &adapter->rx_ring[0]);
2013         }
2014 }
2015
2016 /**
2017  * e1000_set_mac - Change the Ethernet Address of the NIC
2018  * @netdev: network interface device structure
2019  * @p: pointer to an address structure
2020  *
2021  * Returns 0 on success, negative on failure
2022  **/
2023
2024 static int
2025 e1000_set_mac(struct net_device *netdev, void *p)
2026 {
2027         struct e1000_adapter *adapter = netdev_priv(netdev);
2028         struct sockaddr *addr = p;
2029
2030         if(!is_valid_ether_addr(addr->sa_data))
2031                 return -EADDRNOTAVAIL;
2032
2033         /* 82542 2.0 needs to be in reset to write receive address registers */
2034
2035         if(adapter->hw.mac_type == e1000_82542_rev2_0)
2036                 e1000_enter_82542_rst(adapter);
2037
2038         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2039         memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
2040
2041         e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2042
2043         /* With 82571 controllers, LAA may be overwritten (with the default)
2044          * due to controller reset from the other port. */
2045         if (adapter->hw.mac_type == e1000_82571) {
2046                 /* activate the work around */
2047                 adapter->hw.laa_is_present = 1;
2048
2049                 /* Hold a copy of the LAA in RAR[14] This is done so that
2050                  * between the time RAR[0] gets clobbered  and the time it
2051                  * gets fixed (in e1000_watchdog), the actual LAA is in one
2052                  * of the RARs and no incoming packets directed to this port
2053                  * are dropped. Eventaully the LAA will be in RAR[0] and
2054                  * RAR[14] */
2055                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
2056                                         E1000_RAR_ENTRIES - 1);
2057         }
2058
2059         if(adapter->hw.mac_type == e1000_82542_rev2_0)
2060                 e1000_leave_82542_rst(adapter);
2061
2062         return 0;
2063 }
2064
2065 /**
2066  * e1000_set_multi - Multicast and Promiscuous mode set
2067  * @netdev: network interface device structure
2068  *
2069  * The set_multi entry point is called whenever the multicast address
2070  * list or the network interface flags are updated.  This routine is
2071  * responsible for configuring the hardware for proper multicast,
2072  * promiscuous mode, and all-multi behavior.
2073  **/
2074
2075 static void
2076 e1000_set_multi(struct net_device *netdev)
2077 {
2078         struct e1000_adapter *adapter = netdev_priv(netdev);
2079         struct e1000_hw *hw = &adapter->hw;
2080         struct dev_mc_list *mc_ptr;
2081         uint32_t rctl;
2082         uint32_t hash_value;
2083         int i, rar_entries = E1000_RAR_ENTRIES;
2084
2085         /* reserve RAR[14] for LAA over-write work-around */
2086         if (adapter->hw.mac_type == e1000_82571)
2087                 rar_entries--;
2088
2089         /* Check for Promiscuous and All Multicast modes */
2090
2091         rctl = E1000_READ_REG(hw, RCTL);
2092
2093         if(netdev->flags & IFF_PROMISC) {
2094                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2095         } else if(netdev->flags & IFF_ALLMULTI) {
2096                 rctl |= E1000_RCTL_MPE;
2097                 rctl &= ~E1000_RCTL_UPE;
2098         } else {
2099                 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2100         }
2101
2102         E1000_WRITE_REG(hw, RCTL, rctl);
2103
2104         /* 82542 2.0 needs to be in reset to write receive address registers */
2105
2106         if(hw->mac_type == e1000_82542_rev2_0)
2107                 e1000_enter_82542_rst(adapter);
2108
2109         /* load the first 14 multicast address into the exact filters 1-14
2110          * RAR 0 is used for the station MAC adddress
2111          * if there are not 14 addresses, go ahead and clear the filters
2112          * -- with 82571 controllers only 0-13 entries are filled here
2113          */
2114         mc_ptr = netdev->mc_list;
2115
2116         for(i = 1; i < rar_entries; i++) {
2117                 if (mc_ptr) {
2118                         e1000_rar_set(hw, mc_ptr->dmi_addr, i);
2119                         mc_ptr = mc_ptr->next;
2120                 } else {
2121                         E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2122                         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2123                 }
2124         }
2125
2126         /* clear the old settings from the multicast hash table */
2127
2128         for(i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
2129                 E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
2130
2131         /* load any remaining addresses into the hash table */
2132
2133         for(; mc_ptr; mc_ptr = mc_ptr->next) {
2134                 hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
2135                 e1000_mta_set(hw, hash_value);
2136         }
2137
2138         if(hw->mac_type == e1000_82542_rev2_0)
2139                 e1000_leave_82542_rst(adapter);
2140 }
2141
2142 /* Need to wait a few seconds after link up to get diagnostic information from
2143  * the phy */
2144
2145 static void
2146 e1000_update_phy_info(unsigned long data)
2147 {
2148         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2149         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
2150 }
2151
2152 /**
2153  * e1000_82547_tx_fifo_stall - Timer Call-back
2154  * @data: pointer to adapter cast into an unsigned long
2155  **/
2156
2157 static void
2158 e1000_82547_tx_fifo_stall(unsigned long data)
2159 {
2160         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2161         struct net_device *netdev = adapter->netdev;
2162         uint32_t tctl;
2163
2164         if(atomic_read(&adapter->tx_fifo_stall)) {
2165                 if((E1000_READ_REG(&adapter->hw, TDT) ==
2166                     E1000_READ_REG(&adapter->hw, TDH)) &&
2167                    (E1000_READ_REG(&adapter->hw, TDFT) ==
2168                     E1000_READ_REG(&adapter->hw, TDFH)) &&
2169                    (E1000_READ_REG(&adapter->hw, TDFTS) ==
2170                     E1000_READ_REG(&adapter->hw, TDFHS))) {
2171                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2172                         E1000_WRITE_REG(&adapter->hw, TCTL,
2173                                         tctl & ~E1000_TCTL_EN);
2174                         E1000_WRITE_REG(&adapter->hw, TDFT,
2175                                         adapter->tx_head_addr);
2176                         E1000_WRITE_REG(&adapter->hw, TDFH,
2177                                         adapter->tx_head_addr);
2178                         E1000_WRITE_REG(&adapter->hw, TDFTS,
2179                                         adapter->tx_head_addr);
2180                         E1000_WRITE_REG(&adapter->hw, TDFHS,
2181                                         adapter->tx_head_addr);
2182                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2183                         E1000_WRITE_FLUSH(&adapter->hw);
2184
2185                         adapter->tx_fifo_head = 0;
2186                         atomic_set(&adapter->tx_fifo_stall, 0);
2187                         netif_wake_queue(netdev);
2188                 } else {
2189                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2190                 }
2191         }
2192 }
2193
2194 /**
2195  * e1000_watchdog - Timer Call-back
2196  * @data: pointer to adapter cast into an unsigned long
2197  **/
2198 static void
2199 e1000_watchdog(unsigned long data)
2200 {
2201         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2202
2203         /* Do the rest outside of interrupt context */
2204         schedule_work(&adapter->watchdog_task);
2205 }
2206
2207 static void
2208 e1000_watchdog_task(struct e1000_adapter *adapter)
2209 {
2210         struct net_device *netdev = adapter->netdev;
2211         struct e1000_tx_ring *txdr = &adapter->tx_ring[0];
2212         uint32_t link;
2213
2214         e1000_check_for_link(&adapter->hw);
2215         if (adapter->hw.mac_type == e1000_82573) {
2216                 e1000_enable_tx_pkt_filtering(&adapter->hw);
2217                 if(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
2218                         e1000_update_mng_vlan(adapter);
2219         }
2220
2221         if((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
2222            !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
2223                 link = !adapter->hw.serdes_link_down;
2224         else
2225                 link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
2226
2227         if(link) {
2228                 if(!netif_carrier_ok(netdev)) {
2229                         e1000_get_speed_and_duplex(&adapter->hw,
2230                                                    &adapter->link_speed,
2231                                                    &adapter->link_duplex);
2232
2233                         DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
2234                                adapter->link_speed,
2235                                adapter->link_duplex == FULL_DUPLEX ?
2236                                "Full Duplex" : "Half Duplex");
2237
2238                         netif_carrier_on(netdev);
2239                         netif_wake_queue(netdev);
2240                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2241                         adapter->smartspeed = 0;
2242                 }
2243         } else {
2244                 if(netif_carrier_ok(netdev)) {
2245                         adapter->link_speed = 0;
2246                         adapter->link_duplex = 0;
2247                         DPRINTK(LINK, INFO, "NIC Link is Down\n");
2248                         netif_carrier_off(netdev);
2249                         netif_stop_queue(netdev);
2250                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2251                 }
2252
2253                 e1000_smartspeed(adapter);
2254         }
2255
2256         e1000_update_stats(adapter);
2257
2258         adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2259         adapter->tpt_old = adapter->stats.tpt;
2260         adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
2261         adapter->colc_old = adapter->stats.colc;
2262
2263         adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2264         adapter->gorcl_old = adapter->stats.gorcl;
2265         adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2266         adapter->gotcl_old = adapter->stats.gotcl;
2267
2268         e1000_update_adaptive(&adapter->hw);
2269
2270         if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) {
2271                 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2272                         /* We've lost link, so the controller stops DMA,
2273                          * but we've got queued Tx work that's never going
2274                          * to get done, so reset controller to flush Tx.
2275                          * (Do the reset outside of interrupt context). */
2276                         schedule_work(&adapter->tx_timeout_task);
2277                 }
2278         }
2279
2280         /* Dynamic mode for Interrupt Throttle Rate (ITR) */
2281         if(adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
2282                 /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
2283                  * asymmetrical Tx or Rx gets ITR=8000; everyone
2284                  * else is between 2000-8000. */
2285                 uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
2286                 uint32_t dif = (adapter->gotcl > adapter->gorcl ?
2287                         adapter->gotcl - adapter->gorcl :
2288                         adapter->gorcl - adapter->gotcl) / 10000;
2289                 uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
2290                 E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256));
2291         }
2292
2293         /* Cause software interrupt to ensure rx ring is cleaned */
2294         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
2295
2296         /* Force detection of hung controller every watchdog period */
2297         adapter->detect_tx_hung = TRUE;
2298
2299         /* With 82571 controllers, LAA may be overwritten due to controller
2300          * reset from the other port. Set the appropriate LAA in RAR[0] */
2301         if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
2302                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2303
2304         /* Reset the timer */
2305         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
2306 }
2307
2308 #define E1000_TX_FLAGS_CSUM             0x00000001
2309 #define E1000_TX_FLAGS_VLAN             0x00000002
2310 #define E1000_TX_FLAGS_TSO              0x00000004
2311 #define E1000_TX_FLAGS_IPV4             0x00000008
2312 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
2313 #define E1000_TX_FLAGS_VLAN_SHIFT       16
2314
2315 static inline int
2316 e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2317           struct sk_buff *skb)
2318 {
2319 #ifdef NETIF_F_TSO
2320         struct e1000_context_desc *context_desc;
2321         unsigned int i;
2322         uint32_t cmd_length = 0;
2323         uint16_t ipcse = 0, tucse, mss;
2324         uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
2325         int err;
2326
2327         if(skb_shinfo(skb)->tso_size) {
2328                 if (skb_header_cloned(skb)) {
2329                         err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2330                         if (err)
2331                                 return err;
2332                 }
2333
2334                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
2335                 mss = skb_shinfo(skb)->tso_size;
2336                 if(skb->protocol == ntohs(ETH_P_IP)) {
2337                         skb->nh.iph->tot_len = 0;
2338                         skb->nh.iph->check = 0;
2339                         skb->h.th->check =
2340                                 ~csum_tcpudp_magic(skb->nh.iph->saddr,
2341                                                    skb->nh.iph->daddr,
2342                                                    0,
2343                                                    IPPROTO_TCP,
2344                                                    0);
2345                         cmd_length = E1000_TXD_CMD_IP;
2346                         ipcse = skb->h.raw - skb->data - 1;
2347 #ifdef NETIF_F_TSO_IPV6
2348                 } else if(skb->protocol == ntohs(ETH_P_IPV6)) {
2349                         skb->nh.ipv6h->payload_len = 0;
2350                         skb->h.th->check =
2351                                 ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
2352                                                  &skb->nh.ipv6h->daddr,
2353                                                  0,
2354                                                  IPPROTO_TCP,
2355                                                  0);
2356                         ipcse = 0;
2357 #endif
2358                 }
2359                 ipcss = skb->nh.raw - skb->data;
2360                 ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
2361                 tucss = skb->h.raw - skb->data;
2362                 tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
2363                 tucse = 0;
2364
2365                 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2366                                E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2367
2368                 i = tx_ring->next_to_use;
2369                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2370
2371                 context_desc->lower_setup.ip_fields.ipcss  = ipcss;
2372                 context_desc->lower_setup.ip_fields.ipcso  = ipcso;
2373                 context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
2374                 context_desc->upper_setup.tcp_fields.tucss = tucss;
2375                 context_desc->upper_setup.tcp_fields.tucso = tucso;
2376                 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2377                 context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
2378                 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2379                 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2380
2381                 if (++i == tx_ring->count) i = 0;
2382                 tx_ring->next_to_use = i;
2383
2384                 return 1;
2385         }
2386 #endif
2387
2388         return 0;
2389 }
2390
2391 static inline boolean_t
2392 e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2393               struct sk_buff *skb)
2394 {
2395         struct e1000_context_desc *context_desc;
2396         unsigned int i;
2397         uint8_t css;
2398
2399         if(likely(skb->ip_summed == CHECKSUM_HW)) {
2400                 css = skb->h.raw - skb->data;
2401
2402                 i = tx_ring->next_to_use;
2403                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2404
2405                 context_desc->upper_setup.tcp_fields.tucss = css;
2406                 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
2407                 context_desc->upper_setup.tcp_fields.tucse = 0;
2408                 context_desc->tcp_seg_setup.data = 0;
2409                 context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
2410
2411                 if (unlikely(++i == tx_ring->count)) i = 0;
2412                 tx_ring->next_to_use = i;
2413
2414                 return TRUE;
2415         }
2416
2417         return FALSE;
2418 }
2419
2420 #define E1000_MAX_TXD_PWR       12
2421 #define E1000_MAX_DATA_PER_TXD  (1<<E1000_MAX_TXD_PWR)
2422
2423 static inline int
2424 e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2425              struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
2426              unsigned int nr_frags, unsigned int mss)
2427 {
2428         struct e1000_buffer *buffer_info;
2429         unsigned int len = skb->len;
2430         unsigned int offset = 0, size, count = 0, i;
2431         unsigned int f;
2432         len -= skb->data_len;
2433
2434         i = tx_ring->next_to_use;
2435
2436         while(len) {
2437                 buffer_info = &tx_ring->buffer_info[i];
2438                 size = min(len, max_per_txd);
2439 #ifdef NETIF_F_TSO
2440                 /* Workaround for premature desc write-backs
2441                  * in TSO mode.  Append 4-byte sentinel desc */
2442                 if(unlikely(mss && !nr_frags && size == len && size > 8))
2443                         size -= 4;
2444 #endif
2445                 /* work-around for errata 10 and it applies
2446                  * to all controllers in PCI-X mode
2447                  * The fix is to make sure that the first descriptor of a
2448                  * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2449                  */
2450                 if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
2451                                 (size > 2015) && count == 0))
2452                         size = 2015;
2453
2454                 /* Workaround for potential 82544 hang in PCI-X.  Avoid
2455                  * terminating buffers within evenly-aligned dwords. */
2456                 if(unlikely(adapter->pcix_82544 &&
2457                    !((unsigned long)(skb->data + offset + size - 1) & 4) &&
2458                    size > 4))
2459                         size -= 4;
2460
2461                 buffer_info->length = size;
2462                 buffer_info->dma =
2463                         pci_map_single(adapter->pdev,
2464                                 skb->data + offset,
2465                                 size,
2466                                 PCI_DMA_TODEVICE);
2467                 buffer_info->time_stamp = jiffies;
2468
2469                 len -= size;
2470                 offset += size;
2471                 count++;
2472                 if(unlikely(++i == tx_ring->count)) i = 0;
2473         }
2474
2475         for(f = 0; f < nr_frags; f++) {
2476                 struct skb_frag_struct *frag;
2477
2478                 frag = &skb_shinfo(skb)->frags[f];
2479                 len = frag->size;
2480                 offset = frag->page_offset;
2481
2482                 while(len) {
2483                         buffer_info = &tx_ring->buffer_info[i];
2484                         size = min(len, max_per_txd);
2485 #ifdef NETIF_F_TSO
2486                         /* Workaround for premature desc write-backs
2487                          * in TSO mode.  Append 4-byte sentinel desc */
2488                         if(unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
2489                                 size -= 4;
2490 #endif
2491                         /* Workaround for potential 82544 hang in PCI-X.
2492                          * Avoid terminating buffers within evenly-aligned
2493                          * dwords. */
2494                         if(unlikely(adapter->pcix_82544 &&
2495                            !((unsigned long)(frag->page+offset+size-1) & 4) &&
2496                            size > 4))
2497                                 size -= 4;
2498
2499                         buffer_info->length = size;
2500                         buffer_info->dma =
2501                                 pci_map_page(adapter->pdev,
2502                                         frag->page,
2503                                         offset,
2504                                         size,
2505                                         PCI_DMA_TODEVICE);
2506                         buffer_info->time_stamp = jiffies;
2507
2508                         len -= size;
2509                         offset += size;
2510                         count++;
2511                         if(unlikely(++i == tx_ring->count)) i = 0;
2512                 }
2513         }
2514
2515         i = (i == 0) ? tx_ring->count - 1 : i - 1;
2516         tx_ring->buffer_info[i].skb = skb;
2517         tx_ring->buffer_info[first].next_to_watch = i;
2518
2519         return count;
2520 }
2521
2522 static inline void
2523 e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2524                int tx_flags, int count)
2525 {
2526         struct e1000_tx_desc *tx_desc = NULL;
2527         struct e1000_buffer *buffer_info;
2528         uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
2529         unsigned int i;
2530
2531         if(likely(tx_flags & E1000_TX_FLAGS_TSO)) {
2532                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
2533                              E1000_TXD_CMD_TSE;
2534                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2535
2536                 if(likely(tx_flags & E1000_TX_FLAGS_IPV4))
2537                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
2538         }
2539
2540         if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
2541                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
2542                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2543         }
2544
2545         if(unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
2546                 txd_lower |= E1000_TXD_CMD_VLE;
2547                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
2548         }
2549
2550         i = tx_ring->next_to_use;
2551
2552         while(count--) {
2553                 buffer_info = &tx_ring->buffer_info[i];
2554                 tx_desc = E1000_TX_DESC(*tx_ring, i);
2555                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
2556                 tx_desc->lower.data =
2557                         cpu_to_le32(txd_lower | buffer_info->length);
2558                 tx_desc->upper.data = cpu_to_le32(txd_upper);
2559                 if(unlikely(++i == tx_ring->count)) i = 0;
2560         }
2561
2562         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
2563
2564         /* Force memory writes to complete before letting h/w
2565          * know there are new descriptors to fetch.  (Only
2566          * applicable for weak-ordered memory model archs,
2567          * such as IA-64). */
2568         wmb();
2569
2570         tx_ring->next_to_use = i;
2571         writel(i, adapter->hw.hw_addr + tx_ring->tdt);
2572 }
2573
2574 /**
2575  * 82547 workaround to avoid controller hang in half-duplex environment.
2576  * The workaround is to avoid queuing a large packet that would span
2577  * the internal Tx FIFO ring boundary by notifying the stack to resend
2578  * the packet at a later time.  This gives the Tx FIFO an opportunity to
2579  * flush all packets.  When that occurs, we reset the Tx FIFO pointers
2580  * to the beginning of the Tx FIFO.
2581  **/
2582
2583 #define E1000_FIFO_HDR                  0x10
2584 #define E1000_82547_PAD_LEN             0x3E0
2585
2586 static inline int
2587 e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
2588 {
2589         uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
2590         uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
2591
2592         E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
2593
2594         if(adapter->link_duplex != HALF_DUPLEX)
2595                 goto no_fifo_stall_required;
2596
2597         if(atomic_read(&adapter->tx_fifo_stall))
2598                 return 1;
2599
2600         if(skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
2601                 atomic_set(&adapter->tx_fifo_stall, 1);
2602                 return 1;
2603         }
2604
2605 no_fifo_stall_required:
2606         adapter->tx_fifo_head += skb_fifo_len;
2607         if(adapter->tx_fifo_head >= adapter->tx_fifo_size)
2608                 adapter->tx_fifo_head -= adapter->tx_fifo_size;
2609         return 0;
2610 }
2611
2612 #define MINIMUM_DHCP_PACKET_SIZE 282
2613 static inline int
2614 e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
2615 {
2616         struct e1000_hw *hw =  &adapter->hw;
2617         uint16_t length, offset;
2618         if(vlan_tx_tag_present(skb)) {
2619                 if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
2620                         ( adapter->hw.mng_cookie.status &
2621                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
2622                         return 0;
2623         }
2624         if(htons(ETH_P_IP) == skb->protocol) {
2625                 const struct iphdr *ip = skb->nh.iph;
2626                 if(IPPROTO_UDP == ip->protocol) {
2627                         struct udphdr *udp = (struct udphdr *)(skb->h.uh);
2628                         if(ntohs(udp->dest) == 67) {
2629                                 offset = (uint8_t *)udp + 8 - skb->data;
2630                                 length = skb->len - offset;
2631
2632                                 return e1000_mng_write_dhcp_info(hw,
2633                                                 (uint8_t *)udp + 8, length);
2634                         }
2635                 }
2636         } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) {
2637                 struct ethhdr *eth = (struct ethhdr *) skb->data;
2638                 if((htons(ETH_P_IP) == eth->h_proto)) {
2639                         const struct iphdr *ip =
2640                                 (struct iphdr *)((uint8_t *)skb->data+14);
2641                         if(IPPROTO_UDP == ip->protocol) {
2642                                 struct udphdr *udp =
2643                                         (struct udphdr *)((uint8_t *)ip +
2644                                                 (ip->ihl << 2));
2645                                 if(ntohs(udp->dest) == 67) {
2646                                         offset = (uint8_t *)udp + 8 - skb->data;
2647                                         length = skb->len - offset;
2648
2649                                         return e1000_mng_write_dhcp_info(hw,
2650                                                         (uint8_t *)udp + 8,
2651                                                         length);
2652                                 }
2653                         }
2654                 }
2655         }
2656         return 0;
2657 }
2658
2659 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
2660 static int
2661 e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
2662 {
2663         struct e1000_adapter *adapter = netdev_priv(netdev);
2664         struct e1000_tx_ring *tx_ring;
2665         unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
2666         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
2667         unsigned int tx_flags = 0;
2668         unsigned int len = skb->len;
2669         unsigned long flags;
2670         unsigned int nr_frags = 0;
2671         unsigned int mss = 0;
2672         int count = 0;
2673         int tso;
2674         unsigned int f;
2675         len -= skb->data_len;
2676
2677 #ifdef CONFIG_E1000_MQ
2678         tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
2679 #else
2680         tx_ring = adapter->tx_ring;
2681 #endif
2682
2683         if (unlikely(skb->len <= 0)) {
2684                 dev_kfree_skb_any(skb);
2685                 return NETDEV_TX_OK;
2686         }
2687
2688 #ifdef NETIF_F_TSO
2689         mss = skb_shinfo(skb)->tso_size;
2690         /* The controller does a simple calculation to
2691          * make sure there is enough room in the FIFO before
2692          * initiating the DMA for each buffer.  The calc is:
2693          * 4 = ceil(buffer len/mss).  To make sure we don't
2694          * overrun the FIFO, adjust the max buffer len if mss
2695          * drops. */
2696         if(mss) {
2697                 max_per_txd = min(mss << 2, max_per_txd);
2698                 max_txd_pwr = fls(max_per_txd) - 1;
2699         }
2700
2701         if((mss) || (skb->ip_summed == CHECKSUM_HW))
2702                 count++;
2703         count++;
2704 #else
2705         if(skb->ip_summed == CHECKSUM_HW)
2706                 count++;
2707 #endif
2708         count += TXD_USE_COUNT(len, max_txd_pwr);
2709
2710         if(adapter->pcix_82544)
2711                 count++;
2712
2713         /* work-around for errata 10 and it applies to all controllers
2714          * in PCI-X mode, so add one more descriptor to the count
2715          */
2716         if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
2717                         (len > 2015)))
2718                 count++;
2719
2720         nr_frags = skb_shinfo(skb)->nr_frags;
2721         for(f = 0; f < nr_frags; f++)
2722                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
2723                                        max_txd_pwr);
2724         if(adapter->pcix_82544)
2725                 count += nr_frags;
2726
2727 #ifdef NETIF_F_TSO
2728         /* TSO Workaround for 82571/2 Controllers -- if skb->data
2729          * points to just header, pull a few bytes of payload from
2730          * frags into skb->data */
2731         if (skb_shinfo(skb)->tso_size) {
2732                 uint8_t hdr_len;
2733                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
2734                 if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) &&
2735                         (adapter->hw.mac_type == e1000_82571 ||
2736                         adapter->hw.mac_type == e1000_82572)) {
2737                         unsigned int pull_size;
2738                         pull_size = min((unsigned int)4, skb->data_len);
2739                         if (!__pskb_pull_tail(skb, pull_size)) {
2740                                 printk(KERN_ERR "__pskb_pull_tail failed.\n");
2741                                 dev_kfree_skb_any(skb);
2742                                 return -EFAULT;
2743                         }
2744                 }
2745         }
2746 #endif
2747
2748         if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
2749                 e1000_transfer_dhcp_info(adapter, skb);
2750
2751         local_irq_save(flags);
2752         if (!spin_trylock(&tx_ring->tx_lock)) {
2753                 /* Collision - tell upper layer to requeue */
2754                 local_irq_restore(flags);
2755                 return NETDEV_TX_LOCKED;
2756         }
2757
2758         /* need: count + 2 desc gap to keep tail from touching
2759          * head, otherwise try next time */
2760         if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) {
2761                 netif_stop_queue(netdev);
2762                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
2763                 return NETDEV_TX_BUSY;
2764         }
2765
2766         if(unlikely(adapter->hw.mac_type == e1000_82547)) {
2767                 if(unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
2768                         netif_stop_queue(netdev);
2769                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
2770                         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
2771                         return NETDEV_TX_BUSY;
2772                 }
2773         }
2774
2775         if(unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
2776                 tx_flags |= E1000_TX_FLAGS_VLAN;
2777                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
2778         }
2779
2780         first = tx_ring->next_to_use;
2781
2782         tso = e1000_tso(adapter, tx_ring, skb);
2783         if (tso < 0) {
2784                 dev_kfree_skb_any(skb);
2785                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
2786                 return NETDEV_TX_OK;
2787         }
2788
2789         if (likely(tso))
2790                 tx_flags |= E1000_TX_FLAGS_TSO;
2791         else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
2792                 tx_flags |= E1000_TX_FLAGS_CSUM;
2793
2794         /* Old method was to assume IPv4 packet by default if TSO was enabled.
2795          * 82571 hardware supports TSO capabilities for IPv6 as well...
2796          * no longer assume, we must. */
2797         if (likely(skb->protocol == ntohs(ETH_P_IP)))
2798                 tx_flags |= E1000_TX_FLAGS_IPV4;
2799
2800         e1000_tx_queue(adapter, tx_ring, tx_flags,
2801                        e1000_tx_map(adapter, tx_ring, skb, first,
2802                                     max_per_txd, nr_frags, mss));
2803
2804         netdev->trans_start = jiffies;
2805
2806         /* Make sure there is space in the ring for the next send. */
2807         if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2))
2808                 netif_stop_queue(netdev);
2809
2810         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
2811         return NETDEV_TX_OK;
2812 }
2813
2814 /**
2815  * e1000_tx_timeout - Respond to a Tx Hang
2816  * @netdev: network interface device structure
2817  **/
2818
2819 static void
2820 e1000_tx_timeout(struct net_device *netdev)
2821 {
2822         struct e1000_adapter *adapter = netdev_priv(netdev);
2823
2824         /* Do the reset outside of interrupt context */
2825         schedule_work(&adapter->tx_timeout_task);
2826 }
2827
2828 static void
2829 e1000_tx_timeout_task(struct net_device *netdev)
2830 {
2831         struct e1000_adapter *adapter = netdev_priv(netdev);
2832
2833         e1000_down(adapter);
2834         e1000_up(adapter);
2835 }
2836
2837 /**
2838  * e1000_get_stats - Get System Network Statistics
2839  * @netdev: network interface device structure
2840  *
2841  * Returns the address of the device statistics structure.
2842  * The statistics are actually updated from the timer callback.
2843  **/
2844
2845 static struct net_device_stats *
2846 e1000_get_stats(struct net_device *netdev)
2847 {
2848         struct e1000_adapter *adapter = netdev_priv(netdev);
2849
2850         e1000_update_stats(adapter);
2851         return &adapter->net_stats;
2852 }
2853
2854 /**
2855  * e1000_change_mtu - Change the Maximum Transfer Unit
2856  * @netdev: network interface device structure
2857  * @new_mtu: new value for maximum frame size
2858  *
2859  * Returns 0 on success, negative on failure
2860  **/
2861
2862 static int
2863 e1000_change_mtu(struct net_device *netdev, int new_mtu)
2864 {
2865         struct e1000_adapter *adapter = netdev_priv(netdev);
2866         int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
2867
2868         if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
2869                 (max_frame > MAX_JUMBO_FRAME_SIZE)) {
2870                         DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
2871                         return -EINVAL;
2872         }
2873
2874 #define MAX_STD_JUMBO_FRAME_SIZE 9234
2875         /* might want this to be bigger enum check... */
2876         /* 82571 controllers limit jumbo frame size to 10500 bytes */
2877         if ((adapter->hw.mac_type == e1000_82571 ||
2878              adapter->hw.mac_type == e1000_82572) &&
2879             max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
2880                 DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported "
2881                                     "on 82571 and 82572 controllers.\n");
2882                 return -EINVAL;
2883         }
2884
2885         if(adapter->hw.mac_type == e1000_82573 &&
2886             max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
2887                 DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
2888                                     "on 82573\n");
2889                 return -EINVAL;
2890         }
2891
2892         if(adapter->hw.mac_type > e1000_82547_rev_2) {
2893                 adapter->rx_buffer_len = max_frame;
2894                 E1000_ROUNDUP(adapter->rx_buffer_len, 1024);
2895         } else {
2896                 if(unlikely((adapter->hw.mac_type < e1000_82543) &&
2897                    (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
2898                         DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
2899                                             "on 82542\n");
2900                         return -EINVAL;
2901
2902                 } else {
2903                         if(max_frame <= E1000_RXBUFFER_2048) {
2904                                 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
2905                         } else if(max_frame <= E1000_RXBUFFER_4096) {
2906                                 adapter->rx_buffer_len = E1000_RXBUFFER_4096;
2907                         } else if(max_frame <= E1000_RXBUFFER_8192) {
2908                                 adapter->rx_buffer_len = E1000_RXBUFFER_8192;
2909                         } else if(max_frame <= E1000_RXBUFFER_16384) {
2910                                 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
2911                         }
2912                 }
2913         }
2914
2915         netdev->mtu = new_mtu;
2916
2917         if(netif_running(netdev)) {
2918                 e1000_down(adapter);
2919                 e1000_up(adapter);
2920         }
2921
2922         adapter->hw.max_frame_size = max_frame;
2923
2924         return 0;
2925 }
2926
2927 /**
2928  * e1000_update_stats - Update the board statistics counters
2929  * @adapter: board private structure
2930  **/
2931
2932 void
2933 e1000_update_stats(struct e1000_adapter *adapter)
2934 {
2935         struct e1000_hw *hw = &adapter->hw;
2936         unsigned long flags;
2937         uint16_t phy_tmp;
2938
2939 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
2940
2941         spin_lock_irqsave(&adapter->stats_lock, flags);
2942
2943         /* these counters are modified from e1000_adjust_tbi_stats,
2944          * called from the interrupt context, so they must only
2945          * be written while holding adapter->stats_lock
2946          */
2947
2948         adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
2949         adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
2950         adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
2951         adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
2952         adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
2953         adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
2954         adapter->stats.roc += E1000_READ_REG(hw, ROC);
2955         adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
2956         adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
2957         adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
2958         adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
2959         adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
2960         adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
2961
2962         adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
2963         adapter->stats.mpc += E1000_READ_REG(hw, MPC);
2964         adapter->stats.scc += E1000_READ_REG(hw, SCC);
2965         adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
2966         adapter->stats.mcc += E1000_READ_REG(hw, MCC);
2967         adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
2968         adapter->stats.dc += E1000_READ_REG(hw, DC);
2969         adapter->stats.sec += E1000_READ_REG(hw, SEC);
2970         adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
2971         adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
2972         adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
2973         adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
2974         adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
2975         adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
2976         adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
2977         adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
2978         adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
2979         adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
2980         adapter->stats.ruc += E1000_READ_REG(hw, RUC);
2981         adapter->stats.rfc += E1000_READ_REG(hw, RFC);
2982         adapter->stats.rjc += E1000_READ_REG(hw, RJC);
2983         adapter->stats.torl += E1000_READ_REG(hw, TORL);
2984         adapter->stats.torh += E1000_READ_REG(hw, TORH);
2985         adapter->stats.totl += E1000_READ_REG(hw, TOTL);
2986         adapter->stats.toth += E1000_READ_REG(hw, TOTH);
2987         adapter->stats.tpr += E1000_READ_REG(hw, TPR);
2988         adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
2989         adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
2990         adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
2991         adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
2992         adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
2993         adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
2994         adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
2995         adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
2996
2997         /* used for adaptive IFS */
2998
2999         hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
3000         adapter->stats.tpt += hw->tx_packet_delta;
3001         hw->collision_delta = E1000_READ_REG(hw, COLC);
3002         adapter->stats.colc += hw->collision_delta;
3003
3004         if(hw->mac_type >= e1000_82543) {
3005                 adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
3006                 adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
3007                 adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
3008                 adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
3009                 adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
3010                 adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
3011         }
3012         if(hw->mac_type > e1000_82547_rev_2) {
3013                 adapter->stats.iac += E1000_READ_REG(hw, IAC);
3014                 adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
3015                 adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
3016                 adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
3017                 adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
3018                 adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
3019                 adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
3020                 adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
3021                 adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
3022         }
3023
3024         /* Fill out the OS statistics structure */
3025
3026         adapter->net_stats.rx_packets = adapter->stats.gprc;
3027         adapter->net_stats.tx_packets = adapter->stats.gptc;
3028         adapter->net_stats.rx_bytes = adapter->stats.gorcl;
3029         adapter->net_stats.tx_bytes = adapter->stats.gotcl;
3030         adapter->net_stats.multicast = adapter->stats.mprc;
3031         adapter->net_stats.collisions = adapter->stats.colc;
3032
3033         /* Rx Errors */
3034
3035         adapter->net_stats.rx_errors = adapter->stats.rxerrc +
3036                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3037                 adapter->stats.rlec + adapter->stats.mpc +
3038                 adapter->stats.cexterr;
3039         adapter->net_stats.rx_length_errors = adapter->stats.rlec;
3040         adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
3041         adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
3042         adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
3043         adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
3044
3045         /* Tx Errors */
3046
3047         adapter->net_stats.tx_errors = adapter->stats.ecol +
3048                                        adapter->stats.latecol;
3049         adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
3050         adapter->net_stats.tx_window_errors = adapter->stats.latecol;
3051         adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
3052
3053         /* Tx Dropped needs to be maintained elsewhere */
3054
3055         /* Phy Stats */
3056
3057         if(hw->media_type == e1000_media_type_copper) {
3058                 if((adapter->link_speed == SPEED_1000) &&
3059                    (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3060                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3061                         adapter->phy_stats.idle_errors += phy_tmp;
3062                 }
3063
3064                 if((hw->mac_type <= e1000_82546) &&
3065                    (hw->phy_type == e1000_phy_m88) &&
3066                    !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3067                         adapter->phy_stats.receive_errors += phy_tmp;
3068         }
3069
3070         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3071 }
3072
3073 #ifdef CONFIG_E1000_MQ
3074 void
3075 e1000_rx_schedule(void *data)
3076 {
3077         struct net_device *poll_dev, *netdev = data;
3078         struct e1000_adapter *adapter = netdev->priv;
3079         int this_cpu = get_cpu();
3080
3081         poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
3082         if (poll_dev == NULL) {
3083                 put_cpu();
3084                 return;
3085         }
3086
3087         if (likely(netif_rx_schedule_prep(poll_dev)))
3088                 __netif_rx_schedule(poll_dev);
3089         else
3090                 e1000_irq_enable(adapter);
3091
3092         put_cpu();
3093 }
3094 #endif
3095
3096 /**
3097  * e1000_intr - Interrupt Handler
3098  * @irq: interrupt number
3099  * @data: pointer to a network interface device structure
3100  * @pt_regs: CPU registers structure
3101  **/
3102
3103 static irqreturn_t
3104 e1000_intr(int irq, void *data, struct pt_regs *regs)
3105 {
3106         struct net_device *netdev = data;
3107         struct e1000_adapter *adapter = netdev_priv(netdev);
3108         struct e1000_hw *hw = &adapter->hw;
3109         uint32_t icr = E1000_READ_REG(hw, ICR);
3110 #if defined(CONFIG_E1000_NAPI) && defined(CONFIG_E1000_MQ) || !defined(CONFIG_E1000_NAPI)
3111         int i;
3112 #endif
3113
3114         if(unlikely(!icr))
3115                 return IRQ_NONE;  /* Not our interrupt */
3116
3117         if(unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3118                 hw->get_link_status = 1;
3119                 mod_timer(&adapter->watchdog_timer, jiffies);
3120         }
3121
3122 #ifdef CONFIG_E1000_NAPI
3123         atomic_inc(&adapter->irq_sem);
3124         E1000_WRITE_REG(hw, IMC, ~0);
3125         E1000_WRITE_FLUSH(hw);
3126 #ifdef CONFIG_E1000_MQ
3127         if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
3128                 cpu_set(adapter->cpu_for_queue[0],
3129                         adapter->rx_sched_call_data.cpumask);
3130                 for (i = 1; i < adapter->num_queues; i++) {
3131                         cpu_set(adapter->cpu_for_queue[i],
3132                                 adapter->rx_sched_call_data.cpumask);
3133                         atomic_inc(&adapter->irq_sem);
3134                 }
3135                 atomic_set(&adapter->rx_sched_call_data.count, i);
3136                 smp_call_async_mask(&adapter->rx_sched_call_data);
3137         } else {
3138                 printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count));
3139         }
3140 #else /* if !CONFIG_E1000_MQ */
3141         if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
3142                 __netif_rx_schedule(&adapter->polling_netdev[0]);
3143         else
3144                 e1000_irq_enable(adapter);
3145 #endif /* CONFIG_E1000_MQ */
3146
3147 #else /* if !CONFIG_E1000_NAPI */
3148         /* Writing IMC and IMS is needed for 82547.
3149            Due to Hub Link bus being occupied, an interrupt
3150            de-assertion message is not able to be sent.
3151            When an interrupt assertion message is generated later,
3152            two messages are re-ordered and sent out.
3153            That causes APIC to think 82547 is in de-assertion
3154            state, while 82547 is in assertion state, resulting
3155            in dead lock. Writing IMC forces 82547 into
3156            de-assertion state.
3157         */
3158         if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){
3159                 atomic_inc(&adapter->irq_sem);
3160                 E1000_WRITE_REG(hw, IMC, ~0);
3161         }
3162
3163         for(i = 0; i < E1000_MAX_INTR; i++)
3164                 if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3165                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3166                         break;
3167
3168         if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
3169                 e1000_irq_enable(adapter);
3170
3171 #endif /* CONFIG_E1000_NAPI */
3172
3173         return IRQ_HANDLED;
3174 }
3175
3176 #ifdef CONFIG_E1000_NAPI
3177 /**
3178  * e1000_clean - NAPI Rx polling callback
3179  * @adapter: board private structure
3180  **/
3181
3182 static int
3183 e1000_clean(struct net_device *poll_dev, int *budget)
3184 {
3185         struct e1000_adapter *adapter;
3186         int work_to_do = min(*budget, poll_dev->quota);
3187         int tx_cleaned, i = 0, work_done = 0;
3188
3189         /* Must NOT use netdev_priv macro here. */
3190         adapter = poll_dev->priv;
3191
3192         /* Keep link state information with original netdev */
3193         if (!netif_carrier_ok(adapter->netdev))
3194                 goto quit_polling;
3195
3196         while (poll_dev != &adapter->polling_netdev[i]) {
3197                 i++;
3198                 if (unlikely(i == adapter->num_queues))
3199                         BUG();
3200         }
3201
3202         tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]);
3203         adapter->clean_rx(adapter, &adapter->rx_ring[i],
3204                           &work_done, work_to_do);
3205
3206         *budget -= work_done;
3207         poll_dev->quota -= work_done;
3208
3209         /* If no Tx and not enough Rx work done, exit the polling mode */
3210         if((!tx_cleaned && (work_done == 0)) ||
3211            !netif_running(adapter->netdev)) {
3212 quit_polling:
3213                 netif_rx_complete(poll_dev);
3214                 e1000_irq_enable(adapter);
3215                 return 0;
3216         }
3217
3218         return 1;
3219 }
3220
3221 #endif
3222 /**
3223  * e1000_clean_tx_irq - Reclaim resources after transmit completes
3224  * @adapter: board private structure
3225  **/
3226
3227 static boolean_t
3228 e1000_clean_tx_irq(struct e1000_adapter *adapter,
3229                    struct e1000_tx_ring *tx_ring)
3230 {
3231         struct net_device *netdev = adapter->netdev;
3232         struct e1000_tx_desc *tx_desc, *eop_desc;
3233         struct e1000_buffer *buffer_info;
3234         unsigned int i, eop;
3235         boolean_t cleaned = FALSE;
3236
3237         i = tx_ring->next_to_clean;
3238         eop = tx_ring->buffer_info[i].next_to_watch;
3239         eop_desc = E1000_TX_DESC(*tx_ring, eop);
3240
3241         while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
3242                 /* Premature writeback of Tx descriptors clear (free buffers
3243                  * and unmap pci_mapping) previous_buffer_info */
3244                 if (likely(tx_ring->previous_buffer_info.skb != NULL)) {
3245                         e1000_unmap_and_free_tx_resource(adapter,
3246                                         &tx_ring->previous_buffer_info);
3247                 }
3248
3249                 for(cleaned = FALSE; !cleaned; ) {
3250                         tx_desc = E1000_TX_DESC(*tx_ring, i);
3251                         buffer_info = &tx_ring->buffer_info[i];
3252                         cleaned = (i == eop);
3253
3254 #ifdef NETIF_F_TSO
3255                         if (!(netdev->features & NETIF_F_TSO)) {
3256 #endif
3257                                 e1000_unmap_and_free_tx_resource(adapter,
3258                                                                  buffer_info);
3259 #ifdef NETIF_F_TSO
3260                         } else {
3261                                 if (cleaned) {
3262                                         memcpy(&tx_ring->previous_buffer_info,
3263                                                buffer_info,
3264                                                sizeof(struct e1000_buffer));
3265                                         memset(buffer_info, 0,
3266                                                sizeof(struct e1000_buffer));
3267                                 } else {
3268                                         e1000_unmap_and_free_tx_resource(
3269                                             adapter, buffer_info);
3270                                 }
3271                         }
3272 #endif
3273
3274                         tx_desc->buffer_addr = 0;
3275                         tx_desc->lower.data = 0;
3276                         tx_desc->upper.data = 0;
3277
3278                         if(unlikely(++i == tx_ring->count)) i = 0;
3279                 }
3280
3281                 tx_ring->pkt++;
3282
3283                 eop = tx_ring->buffer_info[i].next_to_watch;
3284                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3285         }
3286
3287         tx_ring->next_to_clean = i;
3288
3289         spin_lock(&tx_ring->tx_lock);
3290
3291         if(unlikely(cleaned && netif_queue_stopped(netdev) &&
3292                     netif_carrier_ok(netdev)))
3293                 netif_wake_queue(netdev);
3294
3295         spin_unlock(&tx_ring->tx_lock);
3296
3297         if (adapter->detect_tx_hung) {
3298                 /* Detect a transmit hang in hardware, this serializes the
3299                  * check with the clearing of time_stamp and movement of i */
3300                 adapter->detect_tx_hung = FALSE;
3301                 if (tx_ring->buffer_info[i].dma &&
3302                     time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ)
3303                     && !(E1000_READ_REG(&adapter->hw, STATUS) &
3304                         E1000_STATUS_TXOFF)) {
3305
3306                         /* detected Tx unit hang */
3307                         i = tx_ring->next_to_clean;
3308                         eop = tx_ring->buffer_info[i].next_to_watch;
3309                         eop_desc = E1000_TX_DESC(*tx_ring, eop);
3310                         DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
3311                                         "  TDH                  <%x>\n"
3312                                         "  TDT                  <%x>\n"
3313                                         "  next_to_use          <%x>\n"
3314                                         "  next_to_clean        <%x>\n"
3315                                         "buffer_info[next_to_clean]\n"
3316                                         "  dma                  <%llx>\n"
3317                                         "  time_stamp           <%lx>\n"
3318                                         "  next_to_watch        <%x>\n"
3319                                         "  jiffies              <%lx>\n"
3320                                         "  next_to_watch.status <%x>\n",
3321                                 readl(adapter->hw.hw_addr + tx_ring->tdh),
3322                                 readl(adapter->hw.hw_addr + tx_ring->tdt),
3323                                 tx_ring->next_to_use,
3324                                 i,
3325                                 (unsigned long long)tx_ring->buffer_info[i].dma,
3326                                 tx_ring->buffer_info[i].time_stamp,
3327                                 eop,
3328                                 jiffies,
3329                                 eop_desc->upper.fields.status);
3330                         netif_stop_queue(netdev);
3331                 }
3332         }
3333 #ifdef NETIF_F_TSO
3334         if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
3335             time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ)))
3336                 e1000_unmap_and_free_tx_resource(
3337                     adapter, &tx_ring->previous_buffer_info);
3338 #endif
3339         return cleaned;
3340 }
3341
3342 /**
3343  * e1000_rx_checksum - Receive Checksum Offload for 82543
3344  * @adapter:     board private structure
3345  * @status_err:  receive descriptor status and error fields
3346  * @csum:        receive descriptor csum field
3347  * @sk_buff:     socket buffer with received data
3348  **/
3349
3350 static inline void
3351 e1000_rx_checksum(struct e1000_adapter *adapter,
3352                   uint32_t status_err, uint32_t csum,
3353                   struct sk_buff *skb)
3354 {
3355         uint16_t status = (uint16_t)status_err;
3356         uint8_t errors = (uint8_t)(status_err >> 24);
3357         skb->ip_summed = CHECKSUM_NONE;
3358
3359         /* 82543 or newer only */
3360         if(unlikely(adapter->hw.mac_type < e1000_82543)) return;
3361         /* Ignore Checksum bit is set */
3362         if(unlikely(status & E1000_RXD_STAT_IXSM)) return;
3363         /* TCP/UDP checksum error bit is set */
3364         if(unlikely(errors & E1000_RXD_ERR_TCPE)) {
3365                 /* let the stack verify checksum errors */
3366                 adapter->hw_csum_err++;
3367                 return;
3368         }
3369         /* TCP/UDP Checksum has not been calculated */
3370         if(adapter->hw.mac_type <= e1000_82547_rev_2) {
3371                 if(!(status & E1000_RXD_STAT_TCPCS))
3372                         return;
3373         } else {
3374                 if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
3375                         return;
3376         }
3377         /* It must be a TCP or UDP packet with a valid checksum */
3378         if (likely(status & E1000_RXD_STAT_TCPCS)) {
3379                 /* TCP checksum is good */
3380                 skb->ip_summed = CHECKSUM_UNNECESSARY;
3381         } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
3382                 /* IP fragment with UDP payload */
3383                 /* Hardware complements the payload checksum, so we undo it
3384                  * and then put the value in host order for further stack use.
3385                  */
3386                 csum = ntohl(csum ^ 0xFFFF);
3387                 skb->csum = csum;
3388                 skb->ip_summed = CHECKSUM_HW;
3389         }
3390         adapter->hw_csum_good++;
3391 }
3392
3393 /**
3394  * e1000_clean_rx_irq - Send received data up the network stack; legacy
3395  * @adapter: board private structure
3396  **/
3397
3398 static boolean_t
3399 #ifdef CONFIG_E1000_NAPI
3400 e1000_clean_rx_irq(struct e1000_adapter *adapter,
3401                    struct e1000_rx_ring *rx_ring,
3402                    int *work_done, int work_to_do)
3403 #else
3404 e1000_clean_rx_irq(struct e1000_adapter *adapter,
3405                    struct e1000_rx_ring *rx_ring)
3406 #endif
3407 {
3408         struct net_device *netdev = adapter->netdev;
3409         struct pci_dev *pdev = adapter->pdev;
3410         struct e1000_rx_desc *rx_desc;
3411         struct e1000_buffer *buffer_info;
3412         struct sk_buff *skb;
3413         unsigned long flags;
3414         uint32_t length;
3415         uint8_t last_byte;
3416         unsigned int i;
3417         boolean_t cleaned = FALSE;
3418
3419         i = rx_ring->next_to_clean;
3420         rx_desc = E1000_RX_DESC(*rx_ring, i);
3421
3422         while(rx_desc->status & E1000_RXD_STAT_DD) {
3423                 buffer_info = &rx_ring->buffer_info[i];
3424 #ifdef CONFIG_E1000_NAPI
3425                 if(*work_done >= work_to_do)
3426                         break;
3427                 (*work_done)++;
3428 #endif
3429                 cleaned = TRUE;
3430
3431                 pci_unmap_single(pdev,
3432                                  buffer_info->dma,
3433                                  buffer_info->length,
3434                                  PCI_DMA_FROMDEVICE);
3435
3436                 skb = buffer_info->skb;
3437                 length = le16_to_cpu(rx_desc->length);
3438
3439                 if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) {
3440                         /* All receives must fit into a single buffer */
3441                         E1000_DBG("%s: Receive packet consumed multiple"
3442                                   " buffers\n", netdev->name);
3443                         dev_kfree_skb_irq(skb);
3444                         goto next_desc;
3445                 }
3446
3447                 if(unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
3448                         last_byte = *(skb->data + length - 1);
3449                         if(TBI_ACCEPT(&adapter->hw, rx_desc->status,
3450                                       rx_desc->errors, length, last_byte)) {
3451                                 spin_lock_irqsave(&adapter->stats_lock, flags);
3452                                 e1000_tbi_adjust_stats(&adapter->hw,
3453                                                        &adapter->stats,
3454                                                        length, skb->data);
3455                                 spin_unlock_irqrestore(&adapter->stats_lock,
3456                                                        flags);
3457                                 length--;
3458                         } else {
3459                                 dev_kfree_skb_irq(skb);
3460                                 goto next_desc;
3461                         }
3462                 }
3463
3464                 /* Good Receive */
3465                 skb_put(skb, length - ETHERNET_FCS_SIZE);
3466
3467                 /* Receive Checksum Offload */
3468                 e1000_rx_checksum(adapter,
3469                                   (uint32_t)(rx_desc->status) |
3470                                   ((uint32_t)(rx_desc->errors) << 24),
3471                                   rx_desc->csum, skb);
3472                 skb->protocol = eth_type_trans(skb, netdev);
3473 #ifdef CONFIG_E1000_NAPI
3474                 if(unlikely(adapter->vlgrp &&
3475                             (rx_desc->status & E1000_RXD_STAT_VP))) {
3476                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
3477                                                  le16_to_cpu(rx_desc->special) &
3478                                                  E1000_RXD_SPC_VLAN_MASK);
3479                 } else {
3480                         netif_receive_skb(skb);
3481                 }
3482 #else /* CONFIG_E1000_NAPI */
3483                 if(unlikely(adapter->vlgrp &&
3484                             (rx_desc->status & E1000_RXD_STAT_VP))) {
3485                         vlan_hwaccel_rx(skb, adapter->vlgrp,
3486                                         le16_to_cpu(rx_desc->special) &
3487                                         E1000_RXD_SPC_VLAN_MASK);
3488                 } else {
3489                         netif_rx(skb);
3490                 }
3491 #endif /* CONFIG_E1000_NAPI */
3492                 netdev->last_rx = jiffies;
3493                 rx_ring->pkt++;
3494
3495 next_desc:
3496                 rx_desc->status = 0;
3497                 buffer_info->skb = NULL;
3498                 if(unlikely(++i == rx_ring->count)) i = 0;
3499
3500                 rx_desc = E1000_RX_DESC(*rx_ring, i);
3501         }
3502         rx_ring->next_to_clean = i;
3503         adapter->alloc_rx_buf(adapter, rx_ring);
3504
3505         return cleaned;
3506 }
3507
3508 /**
3509  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
3510  * @adapter: board private structure
3511  **/
3512
3513 static boolean_t
3514 #ifdef CONFIG_E1000_NAPI
3515 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
3516                       struct e1000_rx_ring *rx_ring,
3517                       int *work_done, int work_to_do)
3518 #else
3519 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
3520                       struct e1000_rx_ring *rx_ring)
3521 #endif
3522 {
3523         union e1000_rx_desc_packet_split *rx_desc;
3524         struct net_device *netdev = adapter->netdev;
3525         struct pci_dev *pdev = adapter->pdev;
3526         struct e1000_buffer *buffer_info;
3527         struct e1000_ps_page *ps_page;
3528         struct e1000_ps_page_dma *ps_page_dma;
3529         struct sk_buff *skb;
3530         unsigned int i, j;
3531         uint32_t length, staterr;
3532         boolean_t cleaned = FALSE;
3533
3534         i = rx_ring->next_to_clean;
3535         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
3536         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
3537
3538         while(staterr & E1000_RXD_STAT_DD) {
3539                 buffer_info = &rx_ring->buffer_info[i];
3540                 ps_page = &rx_ring->ps_page[i];
3541                 ps_page_dma = &rx_ring->ps_page_dma[i];
3542 #ifdef CONFIG_E1000_NAPI
3543                 if(unlikely(*work_done >= work_to_do))
3544                         break;
3545                 (*work_done)++;
3546 #endif
3547                 cleaned = TRUE;
3548                 pci_unmap_single(pdev, buffer_info->dma,
3549                                  buffer_info->length,
3550                                  PCI_DMA_FROMDEVICE);
3551
3552                 skb = buffer_info->skb;
3553
3554                 if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
3555                         E1000_DBG("%s: Packet Split buffers didn't pick up"
3556                                   " the full packet\n", netdev->name);
3557                         dev_kfree_skb_irq(skb);
3558                         goto next_desc;
3559                 }
3560
3561                 if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
3562                         dev_kfree_skb_irq(skb);
3563                         goto next_desc;
3564                 }
3565
3566                 length = le16_to_cpu(rx_desc->wb.middle.length0);
3567
3568                 if(unlikely(!length)) {
3569                         E1000_DBG("%s: Last part of the packet spanning"
3570                                   " multiple descriptors\n", netdev->name);
3571                         dev_kfree_skb_irq(skb);
3572                         goto next_desc;
3573                 }
3574
3575                 /* Good Receive */
3576                 skb_put(skb, length);
3577
3578                 for(j = 0; j < adapter->rx_ps_pages; j++) {
3579                         if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j])))
3580                                 break;
3581
3582                         pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
3583                                         PAGE_SIZE, PCI_DMA_FROMDEVICE);
3584                         ps_page_dma->ps_page_dma[j] = 0;
3585                         skb_shinfo(skb)->frags[j].page =
3586                                 ps_page->ps_page[j];
3587                         ps_page->ps_page[j] = NULL;
3588                         skb_shinfo(skb)->frags[j].page_offset = 0;
3589                         skb_shinfo(skb)->frags[j].size = length;
3590                         skb_shinfo(skb)->nr_frags++;
3591                         skb->len += length;
3592                         skb->data_len += length;
3593                 }
3594
3595                 e1000_rx_checksum(adapter, staterr,
3596                                   rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
3597                 skb->protocol = eth_type_trans(skb, netdev);
3598
3599                 if(likely(rx_desc->wb.upper.header_status &
3600                           E1000_RXDPS_HDRSTAT_HDRSP)) {
3601                         adapter->rx_hdr_split++;
3602 #ifdef HAVE_RX_ZERO_COPY
3603                         skb_shinfo(skb)->zero_copy = TRUE;
3604 #endif
3605                 }
3606 #ifdef CONFIG_E1000_NAPI
3607                 if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
3608                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
3609                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
3610                                 E1000_RXD_SPC_VLAN_MASK);
3611                 } else {
3612                         netif_receive_skb(skb);
3613                 }
3614 #else /* CONFIG_E1000_NAPI */
3615                 if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
3616                         vlan_hwaccel_rx(skb, adapter->vlgrp,
3617                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
3618                                 E1000_RXD_SPC_VLAN_MASK);
3619                 } else {
3620                         netif_rx(skb);
3621                 }
3622 #endif /* CONFIG_E1000_NAPI */
3623                 netdev->last_rx = jiffies;
3624                 rx_ring->pkt++;
3625
3626 next_desc:
3627                 rx_desc->wb.middle.status_error &= ~0xFF;
3628                 buffer_info->skb = NULL;
3629                 if(unlikely(++i == rx_ring->count)) i = 0;
3630
3631                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
3632                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
3633         }
3634         rx_ring->next_to_clean = i;
3635         adapter->alloc_rx_buf(adapter, rx_ring);
3636
3637         return cleaned;
3638 }
3639
3640 /**
3641  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
3642  * @adapter: address of board private structure
3643  **/
3644
3645 static void
3646 e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
3647                        struct e1000_rx_ring *rx_ring)
3648 {
3649         struct net_device *netdev = adapter->netdev;
3650         struct pci_dev *pdev = adapter->pdev;
3651         struct e1000_rx_desc *rx_desc;
3652         struct e1000_buffer *buffer_info;
3653         struct sk_buff *skb;
3654         unsigned int i;
3655         unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
3656
3657         i = rx_ring->next_to_use;
3658         buffer_info = &rx_ring->buffer_info[i];
3659
3660         while(!buffer_info->skb) {
3661                 skb = dev_alloc_skb(bufsz);
3662
3663                 if(unlikely(!skb)) {
3664                         /* Better luck next round */
3665                         break;
3666                 }
3667
3668                 /* Fix for errata 23, can't cross 64kB boundary */
3669                 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
3670                         struct sk_buff *oldskb = skb;
3671                         DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
3672                                              "at %p\n", bufsz, skb->data);
3673                         /* Try again, without freeing the previous */
3674                         skb = dev_alloc_skb(bufsz);
3675                         /* Failed allocation, critical failure */
3676                         if (!skb) {
3677                                 dev_kfree_skb(oldskb);
3678                                 break;
3679                         }
3680
3681                         if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
3682                                 /* give up */
3683                                 dev_kfree_skb(skb);
3684                                 dev_kfree_skb(oldskb);
3685                                 break; /* while !buffer_info->skb */
3686                         } else {
3687                                 /* Use new allocation */
3688                                 dev_kfree_skb(oldskb);
3689                         }
3690                 }
3691                 /* Make buffer alignment 2 beyond a 16 byte boundary
3692                  * this will result in a 16 byte aligned IP header after
3693                  * the 14 byte MAC header is removed
3694                  */
3695                 skb_reserve(skb, NET_IP_ALIGN);
3696
3697                 skb->dev = netdev;
3698
3699                 buffer_info->skb = skb;
3700                 buffer_info->length = adapter->rx_buffer_len;
3701                 buffer_info->dma = pci_map_single(pdev,
3702                                                   skb->data,
3703                                                   adapter->rx_buffer_len,
3704                                                   PCI_DMA_FROMDEVICE);
3705
3706                 /* Fix for errata 23, can't cross 64kB boundary */
3707                 if (!e1000_check_64k_bound(adapter,
3708                                         (void *)(unsigned long)buffer_info->dma,
3709                                         adapter->rx_buffer_len)) {
3710                         DPRINTK(RX_ERR, ERR,
3711                                 "dma align check failed: %u bytes at %p\n",
3712                                 adapter->rx_buffer_len,
3713                                 (void *)(unsigned long)buffer_info->dma);
3714                         dev_kfree_skb(skb);
3715                         buffer_info->skb = NULL;
3716
3717                         pci_unmap_single(pdev, buffer_info->dma,
3718                                          adapter->rx_buffer_len,
3719                                          PCI_DMA_FROMDEVICE);
3720
3721                         break; /* while !buffer_info->skb */
3722                 }
3723                 rx_desc = E1000_RX_DESC(*rx_ring, i);
3724                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
3725
3726                 if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) {
3727                         /* Force memory writes to complete before letting h/w
3728                          * know there are new descriptors to fetch.  (Only
3729                          * applicable for weak-ordered memory model archs,
3730                          * such as IA-64). */
3731                         wmb();
3732                         writel(i, adapter->hw.hw_addr + rx_ring->rdt);
3733                 }
3734
3735                 if(unlikely(++i == rx_ring->count)) i = 0;
3736                 buffer_info = &rx_ring->buffer_info[i];
3737         }
3738
3739         rx_ring->next_to_use = i;
3740 }
3741
3742 /**
3743  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
3744  * @adapter: address of board private structure
3745  **/
3746
3747 static void
3748 e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
3749                           struct e1000_rx_ring *rx_ring)
3750 {
3751         struct net_device *netdev = adapter->netdev;
3752         struct pci_dev *pdev = adapter->pdev;
3753         union e1000_rx_desc_packet_split *rx_desc;
3754         struct e1000_buffer *buffer_info;
3755         struct e1000_ps_page *ps_page;
3756         struct e1000_ps_page_dma *ps_page_dma;
3757         struct sk_buff *skb;
3758         unsigned int i, j;
3759
3760         i = rx_ring->next_to_use;
3761         buffer_info = &rx_ring->buffer_info[i];
3762         ps_page = &rx_ring->ps_page[i];
3763         ps_page_dma = &rx_ring->ps_page_dma[i];
3764
3765         while(!buffer_info->skb) {
3766                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
3767
3768                 for(j = 0; j < PS_PAGE_BUFFERS; j++) {
3769                         if (j < adapter->rx_ps_pages) {
3770                                 if (likely(!ps_page->ps_page[j])) {
3771                                         ps_page->ps_page[j] =
3772                                                 alloc_page(GFP_ATOMIC);
3773                                         if (unlikely(!ps_page->ps_page[j]))
3774                                                 goto no_buffers;
3775                                         ps_page_dma->ps_page_dma[j] =
3776                                                 pci_map_page(pdev,
3777                                                             ps_page->ps_page[j],
3778                                                             0, PAGE_SIZE,
3779                                                             PCI_DMA_FROMDEVICE);
3780                                 }
3781                                 /* Refresh the desc even if buffer_addrs didn't
3782                                  * change because each write-back erases
3783                                  * this info.
3784                                  */
3785                                 rx_desc->read.buffer_addr[j+1] =
3786                                      cpu_to_le64(ps_page_dma->ps_page_dma[j]);
3787                         } else
3788                                 rx_desc->read.buffer_addr[j+1] = ~0;
3789                 }
3790
3791                 skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN);
3792
3793                 if(unlikely(!skb))
3794                         break;
3795
3796                 /* Make buffer alignment 2 beyond a 16 byte boundary
3797                  * this will result in a 16 byte aligned IP header after
3798                  * the 14 byte MAC header is removed
3799                  */
3800                 skb_reserve(skb, NET_IP_ALIGN);
3801
3802                 skb->dev = netdev;
3803
3804                 buffer_info->skb = skb;
3805                 buffer_info->length = adapter->rx_ps_bsize0;
3806                 buffer_info->dma = pci_map_single(pdev, skb->data,
3807                                                   adapter->rx_ps_bsize0,
3808                                                   PCI_DMA_FROMDEVICE);
3809
3810                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
3811
3812                 if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) {
3813                         /* Force memory writes to complete before letting h/w
3814                          * know there are new descriptors to fetch.  (Only
3815                          * applicable for weak-ordered memory model archs,
3816                          * such as IA-64). */
3817                         wmb();
3818                         /* Hardware increments by 16 bytes, but packet split
3819                          * descriptors are 32 bytes...so we increment tail
3820                          * twice as much.
3821                          */
3822                         writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
3823                 }
3824
3825                 if(unlikely(++i == rx_ring->count)) i = 0;
3826                 buffer_info = &rx_ring->buffer_info[i];
3827                 ps_page = &rx_ring->ps_page[i];
3828                 ps_page_dma = &rx_ring->ps_page_dma[i];
3829         }
3830
3831 no_buffers:
3832         rx_ring->next_to_use = i;
3833 }
3834
3835 /**
3836  * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
3837  * @adapter:
3838  **/
3839
3840 static void
3841 e1000_smartspeed(struct e1000_adapter *adapter)
3842 {
3843         uint16_t phy_status;
3844         uint16_t phy_ctrl;
3845
3846         if((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
3847            !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
3848                 return;
3849
3850         if(adapter->smartspeed == 0) {
3851                 /* If Master/Slave config fault is asserted twice,
3852                  * we assume back-to-back */
3853                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
3854                 if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
3855                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
3856                 if(!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
3857                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
3858                 if(phy_ctrl & CR_1000T_MS_ENABLE) {
3859                         phy_ctrl &= ~CR_1000T_MS_ENABLE;
3860                         e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
3861                                             phy_ctrl);
3862                         adapter->smartspeed++;
3863                         if(!e1000_phy_setup_autoneg(&adapter->hw) &&
3864                            !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
3865                                                &phy_ctrl)) {
3866                                 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
3867                                              MII_CR_RESTART_AUTO_NEG);
3868                                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
3869                                                     phy_ctrl);
3870                         }
3871                 }
3872                 return;
3873         } else if(adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
3874                 /* If still no link, perhaps using 2/3 pair cable */
3875                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
3876                 phy_ctrl |= CR_1000T_MS_ENABLE;
3877                 e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
3878                 if(!e1000_phy_setup_autoneg(&adapter->hw) &&
3879                    !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
3880                         phy_ctrl |= (MII_CR_AUTO_NEG_EN |
3881                                      MII_CR_RESTART_AUTO_NEG);
3882                         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
3883                 }
3884         }
3885         /* Restart process after E1000_SMARTSPEED_MAX iterations */
3886         if(adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
3887                 adapter->smartspeed = 0;
3888 }
3889
3890 /**
3891  * e1000_ioctl -
3892  * @netdev:
3893  * @ifreq:
3894  * @cmd:
3895  **/
3896
3897 static int
3898 e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
3899 {
3900         switch (cmd) {
3901         case SIOCGMIIPHY:
3902         case SIOCGMIIREG:
3903         case SIOCSMIIREG:
3904                 return e1000_mii_ioctl(netdev, ifr, cmd);
3905         default:
3906                 return -EOPNOTSUPP;
3907         }
3908 }
3909
3910 /**
3911  * e1000_mii_ioctl -
3912  * @netdev:
3913  * @ifreq:
3914  * @cmd:
3915  **/
3916
3917 static int
3918 e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
3919 {
3920         struct e1000_adapter *adapter = netdev_priv(netdev);
3921         struct mii_ioctl_data *data = if_mii(ifr);
3922         int retval;
3923         uint16_t mii_reg;
3924         uint16_t spddplx;
3925         unsigned long flags;
3926
3927         if(adapter->hw.media_type != e1000_media_type_copper)
3928                 return -EOPNOTSUPP;
3929
3930         switch (cmd) {
3931         case SIOCGMIIPHY:
3932                 data->phy_id = adapter->hw.phy_addr;
3933                 break;
3934         case SIOCGMIIREG:
3935                 if(!capable(CAP_NET_ADMIN))
3936                         return -EPERM;
3937                 spin_lock_irqsave(&adapter->stats_lock, flags);
3938                 if(e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
3939                                    &data->val_out)) {
3940                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3941                         return -EIO;
3942                 }
3943                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
3944                 break;
3945         case SIOCSMIIREG:
3946                 if(!capable(CAP_NET_ADMIN))
3947                         return -EPERM;
3948                 if(data->reg_num & ~(0x1F))
3949                         return -EFAULT;
3950                 mii_reg = data->val_in;
3951                 spin_lock_irqsave(&adapter->stats_lock, flags);
3952                 if(e1000_write_phy_reg(&adapter->hw, data->reg_num,
3953                                         mii_reg)) {
3954                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3955                         return -EIO;
3956                 }
3957                 if(adapter->hw.phy_type == e1000_phy_m88) {
3958                         switch (data->reg_num) {
3959                         case PHY_CTRL:
3960                                 if(mii_reg & MII_CR_POWER_DOWN)
3961                                         break;
3962                                 if(mii_reg & MII_CR_AUTO_NEG_EN) {
3963                                         adapter->hw.autoneg = 1;
3964                                         adapter->hw.autoneg_advertised = 0x2F;
3965                                 } else {
3966                                         if (mii_reg & 0x40)
3967                                                 spddplx = SPEED_1000;
3968                                         else if (mii_reg & 0x2000)
3969                                                 spddplx = SPEED_100;
3970                                         else
3971                                                 spddplx = SPEED_10;
3972                                         spddplx += (mii_reg & 0x100)
3973                                                    ? FULL_DUPLEX :
3974                                                    HALF_DUPLEX;
3975                                         retval = e1000_set_spd_dplx(adapter,
3976                                                                     spddplx);
3977                                         if(retval) {
3978                                                 spin_unlock_irqrestore(
3979                                                         &adapter->stats_lock,
3980                                                         flags);
3981                                                 return retval;
3982                                         }
3983                                 }
3984                                 if(netif_running(adapter->netdev)) {
3985                                         e1000_down(adapter);
3986                                         e1000_up(adapter);
3987                                 } else
3988                                         e1000_reset(adapter);
3989                                 break;
3990                         case M88E1000_PHY_SPEC_CTRL:
3991                         case M88E1000_EXT_PHY_SPEC_CTRL:
3992                                 if(e1000_phy_reset(&adapter->hw)) {
3993                                         spin_unlock_irqrestore(
3994                                                 &adapter->stats_lock, flags);
3995                                         return -EIO;
3996                                 }
3997                                 break;
3998                         }
3999                 } else {
4000                         switch (data->reg_num) {
4001                         case PHY_CTRL:
4002                                 if(mii_reg & MII_CR_POWER_DOWN)
4003                                         break;
4004                                 if(netif_running(adapter->netdev)) {
4005                                         e1000_down(adapter);
4006                                         e1000_up(adapter);
4007                                 } else
4008                                         e1000_reset(adapter);
4009                                 break;
4010                         }
4011                 }
4012                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4013                 break;
4014         default:
4015                 return -EOPNOTSUPP;
4016         }
4017         return E1000_SUCCESS;
4018 }
4019
4020 void
4021 e1000_pci_set_mwi(struct e1000_hw *hw)
4022 {
4023         struct e1000_adapter *adapter = hw->back;
4024         int ret_val = pci_set_mwi(adapter->pdev);
4025
4026         if(ret_val)
4027                 DPRINTK(PROBE, ERR, "Error in setting MWI\n");
4028 }
4029
4030 void
4031 e1000_pci_clear_mwi(struct e1000_hw *hw)
4032 {
4033         struct e1000_adapter *adapter = hw->back;
4034
4035         pci_clear_mwi(adapter->pdev);
4036 }
4037
4038 void
4039 e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4040 {
4041         struct e1000_adapter *adapter = hw->back;
4042
4043         pci_read_config_word(adapter->pdev, reg, value);
4044 }
4045
4046 void
4047 e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4048 {
4049         struct e1000_adapter *adapter = hw->back;
4050
4051         pci_write_config_word(adapter->pdev, reg, *value);
4052 }
4053
4054 uint32_t
4055 e1000_io_read(struct e1000_hw *hw, unsigned long port)
4056 {
4057         return inl(port);
4058 }
4059
4060 void
4061 e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
4062 {
4063         outl(value, port);
4064 }
4065
4066 static void
4067 e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
4068 {
4069         struct e1000_adapter *adapter = netdev_priv(netdev);
4070         uint32_t ctrl, rctl;
4071
4072         e1000_irq_disable(adapter);
4073         adapter->vlgrp = grp;
4074
4075         if(grp) {
4076                 /* enable VLAN tag insert/strip */
4077                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4078                 ctrl |= E1000_CTRL_VME;
4079                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4080
4081                 /* enable VLAN receive filtering */
4082                 rctl = E1000_READ_REG(&adapter->hw, RCTL);
4083                 rctl |= E1000_RCTL_VFE;
4084                 rctl &= ~E1000_RCTL_CFIEN;
4085                 E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4086                 e1000_update_mng_vlan(adapter);
4087         } else {
4088                 /* disable VLAN tag insert/strip */
4089                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4090                 ctrl &= ~E1000_CTRL_VME;
4091                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4092
4093                 /* disable VLAN filtering */
4094                 rctl = E1000_READ_REG(&adapter->hw, RCTL);
4095                 rctl &= ~E1000_RCTL_VFE;
4096                 E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4097                 if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
4098                         e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
4099                         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4100                 }
4101         }
4102
4103         e1000_irq_enable(adapter);
4104 }
4105
4106 static void
4107 e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
4108 {
4109         struct e1000_adapter *adapter = netdev_priv(netdev);
4110         uint32_t vfta, index;
4111         if((adapter->hw.mng_cookie.status &
4112                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4113                 (vid == adapter->mng_vlan_id))
4114                 return;
4115         /* add VID to filter table */
4116         index = (vid >> 5) & 0x7F;
4117         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
4118         vfta |= (1 << (vid & 0x1F));
4119         e1000_write_vfta(&adapter->hw, index, vfta);
4120 }
4121
4122 static void
4123 e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
4124 {
4125         struct e1000_adapter *adapter = netdev_priv(netdev);
4126         uint32_t vfta, index;
4127
4128         e1000_irq_disable(adapter);
4129
4130         if(adapter->vlgrp)
4131                 adapter->vlgrp->vlan_devices[vid] = NULL;
4132
4133         e1000_irq_enable(adapter);
4134
4135         if((adapter->hw.mng_cookie.status &
4136                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4137                 (vid == adapter->mng_vlan_id))
4138                 return;
4139         /* remove VID from filter table */
4140         index = (vid >> 5) & 0x7F;
4141         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
4142         vfta &= ~(1 << (vid & 0x1F));
4143         e1000_write_vfta(&adapter->hw, index, vfta);
4144 }
4145
4146 static void
4147 e1000_restore_vlan(struct e1000_adapter *adapter)
4148 {
4149         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
4150
4151         if(adapter->vlgrp) {
4152                 uint16_t vid;
4153                 for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
4154                         if(!adapter->vlgrp->vlan_devices[vid])
4155                                 continue;
4156                         e1000_vlan_rx_add_vid(adapter->netdev, vid);
4157                 }
4158         }
4159 }
4160
4161 int
4162 e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
4163 {
4164         adapter->hw.autoneg = 0;
4165
4166         /* Fiber NICs only allow 1000 gbps Full duplex */
4167         if((adapter->hw.media_type == e1000_media_type_fiber) &&
4168                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
4169                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4170                 return -EINVAL;
4171         }
4172
4173         switch(spddplx) {
4174         case SPEED_10 + DUPLEX_HALF:
4175                 adapter->hw.forced_speed_duplex = e1000_10_half;
4176                 break;
4177         case SPEED_10 + DUPLEX_FULL:
4178                 adapter->hw.forced_speed_duplex = e1000_10_full;
4179                 break;
4180         case SPEED_100 + DUPLEX_HALF:
4181                 adapter->hw.forced_speed_duplex = e1000_100_half;
4182                 break;
4183         case SPEED_100 + DUPLEX_FULL:
4184                 adapter->hw.forced_speed_duplex = e1000_100_full;
4185                 break;
4186         case SPEED_1000 + DUPLEX_FULL:
4187                 adapter->hw.autoneg = 1;
4188                 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
4189                 break;
4190         case SPEED_1000 + DUPLEX_HALF: /* not supported */
4191         default:
4192                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4193                 return -EINVAL;
4194         }
4195         return 0;
4196 }
4197
4198 #ifdef CONFIG_PM
4199 static int
4200 e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4201 {
4202         struct net_device *netdev = pci_get_drvdata(pdev);
4203         struct e1000_adapter *adapter = netdev_priv(netdev);
4204         uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm;
4205         uint32_t wufc = adapter->wol;
4206
4207         netif_device_detach(netdev);
4208
4209         if(netif_running(netdev))
4210                 e1000_down(adapter);
4211
4212         status = E1000_READ_REG(&adapter->hw, STATUS);
4213         if(status & E1000_STATUS_LU)
4214                 wufc &= ~E1000_WUFC_LNKC;
4215
4216         if(wufc) {
4217                 e1000_setup_rctl(adapter);
4218                 e1000_set_multi(netdev);
4219
4220                 /* turn on all-multi mode if wake on multicast is enabled */
4221                 if(adapter->wol & E1000_WUFC_MC) {
4222                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4223                         rctl |= E1000_RCTL_MPE;
4224                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4225                 }
4226
4227                 if(adapter->hw.mac_type >= e1000_82540) {
4228                         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4229                         /* advertise wake from D3Cold */
4230                         #define E1000_CTRL_ADVD3WUC 0x00100000
4231                         /* phy power management enable */
4232                         #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4233                         ctrl |= E1000_CTRL_ADVD3WUC |
4234                                 E1000_CTRL_EN_PHY_PWR_MGMT;
4235                         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4236                 }
4237
4238                 if(adapter->hw.media_type == e1000_media_type_fiber ||
4239                    adapter->hw.media_type == e1000_media_type_internal_serdes) {
4240                         /* keep the laser running in D3 */
4241                         ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
4242                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
4243                         E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
4244                 }
4245
4246                 /* Allow time for pending master requests to run */
4247                 e1000_disable_pciex_master(&adapter->hw);
4248
4249                 E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
4250                 E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
4251                 pci_enable_wake(pdev, 3, 1);
4252                 pci_enable_wake(pdev, 4, 1); /* 4 == D3 cold */
4253         } else {
4254                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
4255                 E1000_WRITE_REG(&adapter->hw, WUFC, 0);
4256                 pci_enable_wake(pdev, 3, 0);
4257                 pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */
4258         }
4259
4260         pci_save_state(pdev);
4261
4262         if(adapter->hw.mac_type >= e1000_82540 &&
4263            adapter->hw.media_type == e1000_media_type_copper) {
4264                 manc = E1000_READ_REG(&adapter->hw, MANC);
4265                 if(manc & E1000_MANC_SMBUS_EN) {
4266                         manc |= E1000_MANC_ARP_EN;
4267                         E1000_WRITE_REG(&adapter->hw, MANC, manc);
4268                         pci_enable_wake(pdev, 3, 1);
4269                         pci_enable_wake(pdev, 4, 1); /* 4 == D3 cold */
4270                 }
4271         }
4272
4273         switch(adapter->hw.mac_type) {
4274         case e1000_82571:
4275         case e1000_82572:
4276                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
4277                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
4278                                 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
4279                 break;
4280         case e1000_82573:
4281                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
4282                 E1000_WRITE_REG(&adapter->hw, SWSM,
4283                                 swsm & ~E1000_SWSM_DRV_LOAD);
4284                 break;
4285         default:
4286                 break;
4287         }
4288
4289         pci_disable_device(pdev);
4290         pci_set_power_state(pdev, pci_choose_state(pdev, state));
4291
4292         return 0;
4293 }
4294
4295 static int
4296 e1000_resume(struct pci_dev *pdev)
4297 {
4298         struct net_device *netdev = pci_get_drvdata(pdev);
4299         struct e1000_adapter *adapter = netdev_priv(netdev);
4300         uint32_t manc, ret_val, swsm;
4301         uint32_t ctrl_ext;
4302
4303         pci_set_power_state(pdev, PCI_D0);
4304         pci_restore_state(pdev);
4305         ret_val = pci_enable_device(pdev);
4306         pci_set_master(pdev);
4307
4308         pci_enable_wake(pdev, PCI_D3hot, 0);
4309         pci_enable_wake(pdev, PCI_D3cold, 0);
4310
4311         e1000_reset(adapter);
4312         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
4313
4314         if(netif_running(netdev))
4315                 e1000_up(adapter);
4316
4317         netif_device_attach(netdev);
4318
4319         if(adapter->hw.mac_type >= e1000_82540 &&
4320            adapter->hw.media_type == e1000_media_type_copper) {
4321                 manc = E1000_READ_REG(&adapter->hw, MANC);
4322                 manc &= ~(E1000_MANC_ARP_EN);
4323                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
4324         }
4325
4326         switch(adapter->hw.mac_type) {
4327         case e1000_82571:
4328         case e1000_82572:
4329                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
4330                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
4331                                 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
4332                 break;
4333         case e1000_82573:
4334                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
4335                 E1000_WRITE_REG(&adapter->hw, SWSM,
4336                                 swsm | E1000_SWSM_DRV_LOAD);
4337                 break;
4338         default:
4339                 break;
4340         }
4341
4342         return 0;
4343 }
4344 #endif
4345 #ifdef CONFIG_NET_POLL_CONTROLLER
4346 /*
4347  * Polling 'interrupt' - used by things like netconsole to send skbs
4348  * without having to re-enable interrupts. It's not called while
4349  * the interrupt routine is executing.
4350  */
4351 static void
4352 e1000_netpoll(struct net_device *netdev)
4353 {
4354         struct e1000_adapter *adapter = netdev_priv(netdev);
4355         disable_irq(adapter->pdev->irq);
4356         e1000_intr(adapter->pdev->irq, netdev, NULL);
4357         e1000_clean_tx_irq(adapter, adapter->tx_ring);
4358         enable_irq(adapter->pdev->irq);
4359 }
4360 #endif
4361
4362 /* e1000_main.c */