1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2012 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
29 #include <linux/netdevice.h>
30 #include <linux/module.h>
31 #include <linux/pci.h>
36 * This is the only thing that needs to be changed to adjust the
37 * maximum number of ports that the driver can manage.
40 #define E1000_MAX_NIC 32
42 #define OPTION_UNSET -1
43 #define OPTION_DISABLED 0
44 #define OPTION_ENABLED 1
46 #define COPYBREAK_DEFAULT 256
47 unsigned int copybreak = COPYBREAK_DEFAULT;
48 module_param(copybreak, uint, 0644);
49 MODULE_PARM_DESC(copybreak,
50 "Maximum size of packet that is copied to a new buffer on receive");
53 * All parameters are treated the same, as an integer array of values.
54 * This macro just reduces the need to repeat the same declaration code
55 * over and over (plus this helps to avoid typo bugs).
58 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
59 #define E1000_PARAM(X, desc) \
60 static int __devinitdata X[E1000_MAX_NIC+1] \
62 static unsigned int num_##X; \
63 module_param_array_named(X, X, int, &num_##X, 0); \
64 MODULE_PARM_DESC(X, desc);
67 * Transmit Interrupt Delay in units of 1.024 microseconds
68 * Tx interrupt delay needs to typically be set to something non-zero
70 * Valid Range: 0-65535
72 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
73 #define DEFAULT_TIDV 8
74 #define MAX_TXDELAY 0xFFFF
78 * Transmit Absolute Interrupt Delay in units of 1.024 microseconds
80 * Valid Range: 0-65535
82 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
83 #define DEFAULT_TADV 32
84 #define MAX_TXABSDELAY 0xFFFF
85 #define MIN_TXABSDELAY 0
88 * Receive Interrupt Delay in units of 1.024 microseconds
89 * hardware will likely hang if you set this to anything but zero.
91 * Valid Range: 0-65535
93 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
94 #define MAX_RXDELAY 0xFFFF
98 * Receive Absolute Interrupt Delay in units of 1.024 microseconds
100 * Valid Range: 0-65535
102 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
103 #define MAX_RXABSDELAY 0xFFFF
104 #define MIN_RXABSDELAY 0
107 * Interrupt Throttle Rate (interrupts/sec)
109 * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
111 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
112 #define DEFAULT_ITR 3
113 #define MAX_ITR 100000
117 * IntMode (Interrupt Mode)
119 * Valid Range: varies depending on kernel configuration & hardware support
121 * legacy=0, MSI=1, MSI-X=2
123 * When MSI/MSI-X support is enabled in kernel-
124 * Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
125 * When MSI/MSI-X support is not enabled in kernel-
126 * Default Value: 0 (legacy)
128 * When a mode is specified that is not allowed/supported, it will be
129 * demoted to the most advanced interrupt mode available.
131 E1000_PARAM(IntMode, "Interrupt Mode");
132 #define MAX_INTMODE 2
133 #define MIN_INTMODE 0
136 * Enable Smart Power Down of the PHY
140 * Default Value: 0 (disabled)
142 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
145 * Enable Kumeran Lock Loss workaround
149 * Default Value: 1 (enabled)
151 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
158 * Default Value: 1 (enabled)
160 E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
163 * Enable CRC Stripping
167 * Default Value: 1 (enabled)
169 E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
172 struct e1000_option {
173 enum { enable_option, range_option, list_option } type;
178 struct { /* range_option info */
182 struct { /* list_option info */
184 struct e1000_opt_list { int i; char *str; } *p;
189 static int __devinit e1000_validate_option(unsigned int *value,
190 const struct e1000_option *opt,
191 struct e1000_adapter *adapter)
193 if (*value == OPTION_UNSET) {
202 e_info("%s Enabled\n", opt->name);
204 case OPTION_DISABLED:
205 e_info("%s Disabled\n", opt->name);
210 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
211 e_info("%s set to %i\n", opt->name, *value);
217 struct e1000_opt_list *ent;
219 for (i = 0; i < opt->arg.l.nr; i++) {
220 ent = &opt->arg.l.p[i];
221 if (*value == ent->i) {
222 if (ent->str[0] != '\0')
223 e_info("%s\n", ent->str);
233 e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
240 * e1000e_check_options - Range Checking for Command Line Parameters
241 * @adapter: board private structure
243 * This routine checks all command line parameters for valid user
244 * input. If an invalid value is given, or if no user specified
245 * value exists, a default value is used. The final value is stored
246 * in a variable in the adapter structure.
248 void __devinit e1000e_check_options(struct e1000_adapter *adapter)
250 struct e1000_hw *hw = &adapter->hw;
251 int bd = adapter->bd_number;
253 if (bd >= E1000_MAX_NIC) {
254 e_notice("Warning: no configuration for board #%i\n", bd);
255 e_notice("Using defaults for all values\n");
258 { /* Transmit Interrupt Delay */
259 static const struct e1000_option opt = {
260 .type = range_option,
261 .name = "Transmit Interrupt Delay",
262 .err = "using default of "
263 __MODULE_STRING(DEFAULT_TIDV),
265 .arg = { .r = { .min = MIN_TXDELAY,
266 .max = MAX_TXDELAY } }
269 if (num_TxIntDelay > bd) {
270 adapter->tx_int_delay = TxIntDelay[bd];
271 e1000_validate_option(&adapter->tx_int_delay, &opt,
274 adapter->tx_int_delay = opt.def;
277 { /* Transmit Absolute Interrupt Delay */
278 static const struct e1000_option opt = {
279 .type = range_option,
280 .name = "Transmit Absolute Interrupt Delay",
281 .err = "using default of "
282 __MODULE_STRING(DEFAULT_TADV),
284 .arg = { .r = { .min = MIN_TXABSDELAY,
285 .max = MAX_TXABSDELAY } }
288 if (num_TxAbsIntDelay > bd) {
289 adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
290 e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
293 adapter->tx_abs_int_delay = opt.def;
296 { /* Receive Interrupt Delay */
297 static struct e1000_option opt = {
298 .type = range_option,
299 .name = "Receive Interrupt Delay",
300 .err = "using default of "
301 __MODULE_STRING(DEFAULT_RDTR),
303 .arg = { .r = { .min = MIN_RXDELAY,
304 .max = MAX_RXDELAY } }
307 if (num_RxIntDelay > bd) {
308 adapter->rx_int_delay = RxIntDelay[bd];
309 e1000_validate_option(&adapter->rx_int_delay, &opt,
312 adapter->rx_int_delay = opt.def;
315 { /* Receive Absolute Interrupt Delay */
316 static const struct e1000_option opt = {
317 .type = range_option,
318 .name = "Receive Absolute Interrupt Delay",
319 .err = "using default of "
320 __MODULE_STRING(DEFAULT_RADV),
322 .arg = { .r = { .min = MIN_RXABSDELAY,
323 .max = MAX_RXABSDELAY } }
326 if (num_RxAbsIntDelay > bd) {
327 adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
328 e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
331 adapter->rx_abs_int_delay = opt.def;
334 { /* Interrupt Throttling Rate */
335 static const struct e1000_option opt = {
336 .type = range_option,
337 .name = "Interrupt Throttling Rate (ints/sec)",
338 .err = "using default of "
339 __MODULE_STRING(DEFAULT_ITR),
341 .arg = { .r = { .min = MIN_ITR,
345 if (num_InterruptThrottleRate > bd) {
346 adapter->itr = InterruptThrottleRate[bd];
347 switch (adapter->itr) {
349 e_info("%s turned off\n", opt.name);
352 e_info("%s set to dynamic mode\n", opt.name);
353 adapter->itr_setting = adapter->itr;
354 adapter->itr = 20000;
357 e_info("%s set to dynamic conservative mode\n",
359 adapter->itr_setting = adapter->itr;
360 adapter->itr = 20000;
363 e_info("%s set to simplified (2000-8000 ints) "
365 adapter->itr_setting = 4;
369 * Save the setting, because the dynamic bits
372 if (e1000_validate_option(&adapter->itr, &opt,
374 (adapter->itr == 3)) {
376 * In case of invalid user value,
377 * default to conservative mode.
379 adapter->itr_setting = adapter->itr;
380 adapter->itr = 20000;
383 * Clear the lower two bits because
384 * they are used as control.
386 adapter->itr_setting =
392 adapter->itr_setting = opt.def;
393 adapter->itr = 20000;
396 { /* Interrupt Mode */
397 static struct e1000_option opt = {
398 .type = range_option,
399 .name = "Interrupt Mode",
400 #ifndef CONFIG_PCI_MSI
401 .err = "defaulting to 0 (legacy)",
402 .def = E1000E_INT_MODE_LEGACY,
403 .arg = { .r = { .min = 0,
408 #ifdef CONFIG_PCI_MSI
409 if (adapter->flags & FLAG_HAS_MSIX) {
410 opt.err = kstrdup("defaulting to 2 (MSI-X)",
412 opt.def = E1000E_INT_MODE_MSIX;
413 opt.arg.r.max = E1000E_INT_MODE_MSIX;
415 opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
416 opt.def = E1000E_INT_MODE_MSI;
417 opt.arg.r.max = E1000E_INT_MODE_MSI;
421 dev_err(&adapter->pdev->dev,
422 "Failed to allocate memory\n");
427 if (num_IntMode > bd) {
428 unsigned int int_mode = IntMode[bd];
429 e1000_validate_option(&int_mode, &opt, adapter);
430 adapter->int_mode = int_mode;
432 adapter->int_mode = opt.def;
435 #ifdef CONFIG_PCI_MSI
439 { /* Smart Power Down */
440 static const struct e1000_option opt = {
441 .type = enable_option,
442 .name = "PHY Smart Power Down",
443 .err = "defaulting to Disabled",
444 .def = OPTION_DISABLED
447 if (num_SmartPowerDownEnable > bd) {
448 unsigned int spd = SmartPowerDownEnable[bd];
449 e1000_validate_option(&spd, &opt, adapter);
450 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
452 adapter->flags |= FLAG_SMART_POWER_DOWN;
455 { /* CRC Stripping */
456 static const struct e1000_option opt = {
457 .type = enable_option,
458 .name = "CRC Stripping",
459 .err = "defaulting to Enabled",
460 .def = OPTION_ENABLED
463 if (num_CrcStripping > bd) {
464 unsigned int crc_stripping = CrcStripping[bd];
465 e1000_validate_option(&crc_stripping, &opt, adapter);
466 if (crc_stripping == OPTION_ENABLED) {
467 adapter->flags2 |= FLAG2_CRC_STRIPPING;
468 adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
471 adapter->flags2 |= FLAG2_CRC_STRIPPING;
472 adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
475 { /* Kumeran Lock Loss Workaround */
476 static const struct e1000_option opt = {
477 .type = enable_option,
478 .name = "Kumeran Lock Loss Workaround",
479 .err = "defaulting to Enabled",
480 .def = OPTION_ENABLED
483 if (num_KumeranLockLoss > bd) {
484 unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
485 e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
486 if (hw->mac.type == e1000_ich8lan)
487 e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
490 if (hw->mac.type == e1000_ich8lan)
491 e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
495 { /* Write-protect NVM */
496 static const struct e1000_option opt = {
497 .type = enable_option,
498 .name = "Write-protect NVM",
499 .err = "defaulting to Enabled",
500 .def = OPTION_ENABLED
503 if (adapter->flags & FLAG_IS_ICH) {
504 if (num_WriteProtectNVM > bd) {
505 unsigned int write_protect_nvm = WriteProtectNVM[bd];
506 e1000_validate_option(&write_protect_nvm, &opt,
508 if (write_protect_nvm)
509 adapter->flags |= FLAG_READ_ONLY_NVM;
512 adapter->flags |= FLAG_READ_ONLY_NVM;