drivers/net/wireless/ath/ath10k/wmi.h

   1 /*
   2  * Copyright (c) 2005-2011 Atheros Communications Inc.
   3  * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  */
  17
  18 #ifndef _WMI_H_
  19 #define _WMI_H_
  20
  21 #include <linux/types.h>
  22 #include <net/mac80211.h>
  23
  24 /*
  25  * This file specifies the WMI interface for the Unified Software
  26  * Architecture.
  27  *
  28  * It includes definitions of all the commands and events. Commands are
  29  * messages from the host to the target. Events and Replies are messages
  30  * from the target to the host.
  31  *
  32  * Ownership of correctness in regards to WMI commands belongs to the host
  33  * driver and the target is not required to validate parameters for value,
  34  * proper range, or any other checking.
  35  *
  36  * Guidelines for extending this interface are below.
  37  *
  38  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
  39  *
  40  * 2. Use ONLY u32 type for defining member variables within WMI
  41  *    command/event structures. Do not use u8, u16, bool or
  42  *    enum types within these structures.
  43  *
  44  * 3. DO NOT define bit fields within structures. Implement bit fields
  45  *    using masks if necessary. Do not use the programming language's bit
  46  *    field definition.
  47  *
  48  * 4. Define macros for encode/decode of u8, u16 fields within
  49  *    the u32 variables. Use these macros for set/get of these fields.
  50  *    Try to use this to optimize the structure without bloating it with
  51  *    u32 variables for every lower sized field.
  52  *
  53  * 5. Do not use PACK/UNPACK attributes for the structures as each member
  54  *    variable is already 4-byte aligned by virtue of being a u32
  55  *    type.
  56  *
  57  * 6. Comment each parameter part of the WMI command/event structure by
  58  *    using the 2 stars at the begining of C comment instead of one star to
  59  *    enable HTML document generation using Doxygen.
  60  *
  61  */
  62
  63 /* Control Path */
  64 struct wmi_cmd_hdr {
  65         __le32 cmd_id;
  66 } __packed;
  67
  68 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
  69 #define WMI_CMD_HDR_CMD_ID_LSB    0
  70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
  71 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
  72
  73 #define HTC_PROTOCOL_VERSION    0x0002
  74 #define WMI_PROTOCOL_VERSION    0x0002
  75
  76 /*
  77  * There is no signed version of __le32, so for a temporary solution come
  78  * up with our own version. The idea is from fs/ntfs/types.h.
  79  *
  80  * Use a_ prefix so that it doesn't conflict if we get proper support to
  81  * linux/types.h.
  82  */
  83 typedef __s32 __bitwise a_sle32;
  84
  85 static inline a_sle32 a_cpu_to_sle32(s32 val)
  86 {
  87         return (__force a_sle32)cpu_to_le32(val);
  88 }
  89
  90 static inline s32 a_sle32_to_cpu(a_sle32 val)
  91 {
  92         return le32_to_cpu((__force __le32)val);
  93 }
  94
  95 enum wmi_service {
  96         WMI_SERVICE_BEACON_OFFLOAD = 0,
  97         WMI_SERVICE_SCAN_OFFLOAD,
  98         WMI_SERVICE_ROAM_OFFLOAD,
  99         WMI_SERVICE_BCN_MISS_OFFLOAD,
 100         WMI_SERVICE_STA_PWRSAVE,
 101         WMI_SERVICE_STA_ADVANCED_PWRSAVE,
 102         WMI_SERVICE_AP_UAPSD,
 103         WMI_SERVICE_AP_DFS,
 104         WMI_SERVICE_11AC,
 105         WMI_SERVICE_BLOCKACK,
 106         WMI_SERVICE_PHYERR,
 107         WMI_SERVICE_BCN_FILTER,
 108         WMI_SERVICE_RTT,
 109         WMI_SERVICE_RATECTRL,
 110         WMI_SERVICE_WOW,
 111         WMI_SERVICE_RATECTRL_CACHE,
 112         WMI_SERVICE_IRAM_TIDS,
 113         WMI_SERVICE_ARPNS_OFFLOAD,
 114         WMI_SERVICE_NLO,
 115         WMI_SERVICE_GTK_OFFLOAD,
 116         WMI_SERVICE_SCAN_SCH,
 117         WMI_SERVICE_CSA_OFFLOAD,
 118         WMI_SERVICE_CHATTER,
 119         WMI_SERVICE_COEX_FREQAVOID,
 120         WMI_SERVICE_PACKET_POWER_SAVE,
 121         WMI_SERVICE_FORCE_FW_HANG,
 122         WMI_SERVICE_GPIO,
 123         WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 124         WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 125         WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 126         WMI_SERVICE_STA_KEEP_ALIVE,
 127         WMI_SERVICE_TX_ENCAP,
 128         WMI_SERVICE_BURST,
 129         WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 130         WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 131         WMI_SERVICE_ROAM_SCAN_OFFLOAD,
 132         WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 133         WMI_SERVICE_EARLY_RX,
 134         WMI_SERVICE_STA_SMPS,
 135         WMI_SERVICE_FWTEST,
 136         WMI_SERVICE_STA_WMMAC,
 137         WMI_SERVICE_TDLS,
 138         WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
 139         WMI_SERVICE_ADAPTIVE_OCS,
 140         WMI_SERVICE_BA_SSN_SUPPORT,
 141         WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
 142         WMI_SERVICE_WLAN_HB,
 143         WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
 144         WMI_SERVICE_BATCH_SCAN,
 145         WMI_SERVICE_QPOWER,
 146         WMI_SERVICE_PLMREQ,
 147         WMI_SERVICE_THERMAL_MGMT,
 148         WMI_SERVICE_RMC,
 149         WMI_SERVICE_MHF_OFFLOAD,
 150         WMI_SERVICE_COEX_SAR,
 151         WMI_SERVICE_BCN_TXRATE_OVERRIDE,
 152         WMI_SERVICE_NAN,
 153         WMI_SERVICE_L1SS_STAT,
 154         WMI_SERVICE_ESTIMATE_LINKSPEED,
 155         WMI_SERVICE_OBSS_SCAN,
 156         WMI_SERVICE_TDLS_OFFCHAN,
 157         WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
 158         WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
 159         WMI_SERVICE_IBSS_PWRSAVE,
 160         WMI_SERVICE_LPASS,
 161         WMI_SERVICE_EXTSCAN,
 162         WMI_SERVICE_D0WOW,
 163         WMI_SERVICE_HSOFFLOAD,
 164         WMI_SERVICE_ROAM_HO_OFFLOAD,
 165         WMI_SERVICE_RX_FULL_REORDER,
 166         WMI_SERVICE_DHCP_OFFLOAD,
 167         WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
 168         WMI_SERVICE_MDNS_OFFLOAD,
 169         WMI_SERVICE_SAP_AUTH_OFFLOAD,
 170         WMI_SERVICE_ATF,
 171         WMI_SERVICE_COEX_GPIO,
 172         WMI_SERVICE_ENHANCED_PROXY_STA,
 173         WMI_SERVICE_TT,
 174         WMI_SERVICE_PEER_CACHING,
 175         WMI_SERVICE_AUX_SPECTRAL_INTF,
 176         WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 177         WMI_SERVICE_BSS_CHANNEL_INFO_64,
 178         WMI_SERVICE_EXT_RES_CFG_SUPPORT,
 179         WMI_SERVICE_MESH_11S,
 180         WMI_SERVICE_MESH_NON_11S,
 181         WMI_SERVICE_PEER_STATS,
 182         WMI_SERVICE_RESTRT_CHNL_SUPPORT,
 183
 184         /* keep last */
 185         WMI_SERVICE_MAX,
 186 };
 187
 188 enum wmi_10x_service {
 189         WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
 190         WMI_10X_SERVICE_SCAN_OFFLOAD,
 191         WMI_10X_SERVICE_ROAM_OFFLOAD,
 192         WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 193         WMI_10X_SERVICE_STA_PWRSAVE,
 194         WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 195         WMI_10X_SERVICE_AP_UAPSD,
 196         WMI_10X_SERVICE_AP_DFS,
 197         WMI_10X_SERVICE_11AC,
 198         WMI_10X_SERVICE_BLOCKACK,
 199         WMI_10X_SERVICE_PHYERR,
 200         WMI_10X_SERVICE_BCN_FILTER,
 201         WMI_10X_SERVICE_RTT,
 202         WMI_10X_SERVICE_RATECTRL,
 203         WMI_10X_SERVICE_WOW,
 204         WMI_10X_SERVICE_RATECTRL_CACHE,
 205         WMI_10X_SERVICE_IRAM_TIDS,
 206         WMI_10X_SERVICE_BURST,
 207
 208         /* introduced in 10.2 */
 209         WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 210         WMI_10X_SERVICE_FORCE_FW_HANG,
 211         WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 212         WMI_10X_SERVICE_ATF,
 213         WMI_10X_SERVICE_COEX_GPIO,
 214         WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 215         WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 216         WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 217         WMI_10X_SERVICE_MESH,
 218         WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 219         WMI_10X_SERVICE_PEER_STATS,
 220 };
 221
 222 enum wmi_main_service {
 223         WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
 224         WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 225         WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 226         WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 227         WMI_MAIN_SERVICE_STA_PWRSAVE,
 228         WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 229         WMI_MAIN_SERVICE_AP_UAPSD,
 230         WMI_MAIN_SERVICE_AP_DFS,
 231         WMI_MAIN_SERVICE_11AC,
 232         WMI_MAIN_SERVICE_BLOCKACK,
 233         WMI_MAIN_SERVICE_PHYERR,
 234         WMI_MAIN_SERVICE_BCN_FILTER,
 235         WMI_MAIN_SERVICE_RTT,
 236         WMI_MAIN_SERVICE_RATECTRL,
 237         WMI_MAIN_SERVICE_WOW,
 238         WMI_MAIN_SERVICE_RATECTRL_CACHE,
 239         WMI_MAIN_SERVICE_IRAM_TIDS,
 240         WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 241         WMI_MAIN_SERVICE_NLO,
 242         WMI_MAIN_SERVICE_GTK_OFFLOAD,
 243         WMI_MAIN_SERVICE_SCAN_SCH,
 244         WMI_MAIN_SERVICE_CSA_OFFLOAD,
 245         WMI_MAIN_SERVICE_CHATTER,
 246         WMI_MAIN_SERVICE_COEX_FREQAVOID,
 247         WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 248         WMI_MAIN_SERVICE_FORCE_FW_HANG,
 249         WMI_MAIN_SERVICE_GPIO,
 250         WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 251         WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 252         WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 253         WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 254         WMI_MAIN_SERVICE_TX_ENCAP,
 255 };
 256
 257 enum wmi_10_4_service {
 258         WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
 259         WMI_10_4_SERVICE_SCAN_OFFLOAD,
 260         WMI_10_4_SERVICE_ROAM_OFFLOAD,
 261         WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 262         WMI_10_4_SERVICE_STA_PWRSAVE,
 263         WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 264         WMI_10_4_SERVICE_AP_UAPSD,
 265         WMI_10_4_SERVICE_AP_DFS,
 266         WMI_10_4_SERVICE_11AC,
 267         WMI_10_4_SERVICE_BLOCKACK,
 268         WMI_10_4_SERVICE_PHYERR,
 269         WMI_10_4_SERVICE_BCN_FILTER,
 270         WMI_10_4_SERVICE_RTT,
 271         WMI_10_4_SERVICE_RATECTRL,
 272         WMI_10_4_SERVICE_WOW,
 273         WMI_10_4_SERVICE_RATECTRL_CACHE,
 274         WMI_10_4_SERVICE_IRAM_TIDS,
 275         WMI_10_4_SERVICE_BURST,
 276         WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 277         WMI_10_4_SERVICE_GTK_OFFLOAD,
 278         WMI_10_4_SERVICE_SCAN_SCH,
 279         WMI_10_4_SERVICE_CSA_OFFLOAD,
 280         WMI_10_4_SERVICE_CHATTER,
 281         WMI_10_4_SERVICE_COEX_FREQAVOID,
 282         WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 283         WMI_10_4_SERVICE_FORCE_FW_HANG,
 284         WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 285         WMI_10_4_SERVICE_GPIO,
 286         WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 287         WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 288         WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 289         WMI_10_4_SERVICE_TX_ENCAP,
 290         WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 291         WMI_10_4_SERVICE_EARLY_RX,
 292         WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 293         WMI_10_4_SERVICE_TT,
 294         WMI_10_4_SERVICE_ATF,
 295         WMI_10_4_SERVICE_PEER_CACHING,
 296         WMI_10_4_SERVICE_COEX_GPIO,
 297         WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 298         WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 299         WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 300         WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 301         WMI_10_4_SERVICE_MESH_NON_11S,
 302         WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 303         WMI_10_4_SERVICE_PEER_STATS,
 304         WMI_10_4_SERVICE_MESH_11S,
 305 };
 306
 307 static inline char *wmi_service_name(int service_id)
 308 {
 309 #define SVCSTR(x) case x: return #x
 310
 311         switch (service_id) {
 312         SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
 313         SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
 314         SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
 315         SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
 316         SVCSTR(WMI_SERVICE_STA_PWRSAVE);
 317         SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
 318         SVCSTR(WMI_SERVICE_AP_UAPSD);
 319         SVCSTR(WMI_SERVICE_AP_DFS);
 320         SVCSTR(WMI_SERVICE_11AC);
 321         SVCSTR(WMI_SERVICE_BLOCKACK);
 322         SVCSTR(WMI_SERVICE_PHYERR);
 323         SVCSTR(WMI_SERVICE_BCN_FILTER);
 324         SVCSTR(WMI_SERVICE_RTT);
 325         SVCSTR(WMI_SERVICE_RATECTRL);
 326         SVCSTR(WMI_SERVICE_WOW);
 327         SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
 328         SVCSTR(WMI_SERVICE_IRAM_TIDS);
 329         SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
 330         SVCSTR(WMI_SERVICE_NLO);
 331         SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
 332         SVCSTR(WMI_SERVICE_SCAN_SCH);
 333         SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
 334         SVCSTR(WMI_SERVICE_CHATTER);
 335         SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
 336         SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
 337         SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
 338         SVCSTR(WMI_SERVICE_GPIO);
 339         SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
 340         SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
 341         SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
 342         SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
 343         SVCSTR(WMI_SERVICE_TX_ENCAP);
 344         SVCSTR(WMI_SERVICE_BURST);
 345         SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 346         SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
 347         SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
 348         SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
 349         SVCSTR(WMI_SERVICE_EARLY_RX);
 350         SVCSTR(WMI_SERVICE_STA_SMPS);
 351         SVCSTR(WMI_SERVICE_FWTEST);
 352         SVCSTR(WMI_SERVICE_STA_WMMAC);
 353         SVCSTR(WMI_SERVICE_TDLS);
 354         SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
 355         SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
 356         SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
 357         SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
 358         SVCSTR(WMI_SERVICE_WLAN_HB);
 359         SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
 360         SVCSTR(WMI_SERVICE_BATCH_SCAN);
 361         SVCSTR(WMI_SERVICE_QPOWER);
 362         SVCSTR(WMI_SERVICE_PLMREQ);
 363         SVCSTR(WMI_SERVICE_THERMAL_MGMT);
 364         SVCSTR(WMI_SERVICE_RMC);
 365         SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
 366         SVCSTR(WMI_SERVICE_COEX_SAR);
 367         SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
 368         SVCSTR(WMI_SERVICE_NAN);
 369         SVCSTR(WMI_SERVICE_L1SS_STAT);
 370         SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
 371         SVCSTR(WMI_SERVICE_OBSS_SCAN);
 372         SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
 373         SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
 374         SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
 375         SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
 376         SVCSTR(WMI_SERVICE_LPASS);
 377         SVCSTR(WMI_SERVICE_EXTSCAN);
 378         SVCSTR(WMI_SERVICE_D0WOW);
 379         SVCSTR(WMI_SERVICE_HSOFFLOAD);
 380         SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
 381         SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
 382         SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
 383         SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
 384         SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
 385         SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 386         SVCSTR(WMI_SERVICE_ATF);
 387         SVCSTR(WMI_SERVICE_COEX_GPIO);
 388         SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
 389         SVCSTR(WMI_SERVICE_TT);
 390         SVCSTR(WMI_SERVICE_PEER_CACHING);
 391         SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
 392         SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 393         SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 394         SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
 395         SVCSTR(WMI_SERVICE_MESH_11S);
 396         SVCSTR(WMI_SERVICE_MESH_NON_11S);
 397         SVCSTR(WMI_SERVICE_PEER_STATS);
 398         SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
 399         default:
 400                 return NULL;
 401         }
 402
 403 #undef SVCSTR
 404 }
 405
 406 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 407         ((svc_id) < (len) && \
 408          __le32_to_cpu((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \
 409          BIT((svc_id)%(sizeof(u32))))
 410
 411 #define SVCMAP(x, y, len) \
 412         do { \
 413                 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \
 414                         __set_bit(y, out); \
 415         } while (0)
 416
 417 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 418                                    size_t len)
 419 {
 420         SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
 421                WMI_SERVICE_BEACON_OFFLOAD, len);
 422         SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
 423                WMI_SERVICE_SCAN_OFFLOAD, len);
 424         SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
 425                WMI_SERVICE_ROAM_OFFLOAD, len);
 426         SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 427                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 428         SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
 429                WMI_SERVICE_STA_PWRSAVE, len);
 430         SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 431                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 432         SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
 433                WMI_SERVICE_AP_UAPSD, len);
 434         SVCMAP(WMI_10X_SERVICE_AP_DFS,
 435                WMI_SERVICE_AP_DFS, len);
 436         SVCMAP(WMI_10X_SERVICE_11AC,
 437                WMI_SERVICE_11AC, len);
 438         SVCMAP(WMI_10X_SERVICE_BLOCKACK,
 439                WMI_SERVICE_BLOCKACK, len);
 440         SVCMAP(WMI_10X_SERVICE_PHYERR,
 441                WMI_SERVICE_PHYERR, len);
 442         SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
 443                WMI_SERVICE_BCN_FILTER, len);
 444         SVCMAP(WMI_10X_SERVICE_RTT,
 445                WMI_SERVICE_RTT, len);
 446         SVCMAP(WMI_10X_SERVICE_RATECTRL,
 447                WMI_SERVICE_RATECTRL, len);
 448         SVCMAP(WMI_10X_SERVICE_WOW,
 449                WMI_SERVICE_WOW, len);
 450         SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
 451                WMI_SERVICE_RATECTRL_CACHE, len);
 452         SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
 453                WMI_SERVICE_IRAM_TIDS, len);
 454         SVCMAP(WMI_10X_SERVICE_BURST,
 455                WMI_SERVICE_BURST, len);
 456         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 457                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 458         SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
 459                WMI_SERVICE_FORCE_FW_HANG, len);
 460         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 461                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 462         SVCMAP(WMI_10X_SERVICE_ATF,
 463                WMI_SERVICE_ATF, len);
 464         SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
 465                WMI_SERVICE_COEX_GPIO, len);
 466         SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 467                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 468         SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 469                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 470         SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 471                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 472         SVCMAP(WMI_10X_SERVICE_MESH,
 473                WMI_SERVICE_MESH_11S, len);
 474         SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 475                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 476         SVCMAP(WMI_10X_SERVICE_PEER_STATS,
 477                WMI_SERVICE_PEER_STATS, len);
 478 }
 479
 480 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
 481                                     size_t len)
 482 {
 483         SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
 484                WMI_SERVICE_BEACON_OFFLOAD, len);
 485         SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 486                WMI_SERVICE_SCAN_OFFLOAD, len);
 487         SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 488                WMI_SERVICE_ROAM_OFFLOAD, len);
 489         SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 490                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 491         SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
 492                WMI_SERVICE_STA_PWRSAVE, len);
 493         SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 494                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 495         SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
 496                WMI_SERVICE_AP_UAPSD, len);
 497         SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
 498                WMI_SERVICE_AP_DFS, len);
 499         SVCMAP(WMI_MAIN_SERVICE_11AC,
 500                WMI_SERVICE_11AC, len);
 501         SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
 502                WMI_SERVICE_BLOCKACK, len);
 503         SVCMAP(WMI_MAIN_SERVICE_PHYERR,
 504                WMI_SERVICE_PHYERR, len);
 505         SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
 506                WMI_SERVICE_BCN_FILTER, len);
 507         SVCMAP(WMI_MAIN_SERVICE_RTT,
 508                WMI_SERVICE_RTT, len);
 509         SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
 510                WMI_SERVICE_RATECTRL, len);
 511         SVCMAP(WMI_MAIN_SERVICE_WOW,
 512                WMI_SERVICE_WOW, len);
 513         SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
 514                WMI_SERVICE_RATECTRL_CACHE, len);
 515         SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
 516                WMI_SERVICE_IRAM_TIDS, len);
 517         SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 518                WMI_SERVICE_ARPNS_OFFLOAD, len);
 519         SVCMAP(WMI_MAIN_SERVICE_NLO,
 520                WMI_SERVICE_NLO, len);
 521         SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
 522                WMI_SERVICE_GTK_OFFLOAD, len);
 523         SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
 524                WMI_SERVICE_SCAN_SCH, len);
 525         SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
 526                WMI_SERVICE_CSA_OFFLOAD, len);
 527         SVCMAP(WMI_MAIN_SERVICE_CHATTER,
 528                WMI_SERVICE_CHATTER, len);
 529         SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
 530                WMI_SERVICE_COEX_FREQAVOID, len);
 531         SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 532                WMI_SERVICE_PACKET_POWER_SAVE, len);
 533         SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
 534                WMI_SERVICE_FORCE_FW_HANG, len);
 535         SVCMAP(WMI_MAIN_SERVICE_GPIO,
 536                WMI_SERVICE_GPIO, len);
 537         SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 538                WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
 539         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 540                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 541         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 542                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 543         SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 544                WMI_SERVICE_STA_KEEP_ALIVE, len);
 545         SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
 546                WMI_SERVICE_TX_ENCAP, len);
 547 }
 548
 549 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 550                                     size_t len)
 551 {
 552         SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
 553                WMI_SERVICE_BEACON_OFFLOAD, len);
 554         SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
 555                WMI_SERVICE_SCAN_OFFLOAD, len);
 556         SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
 557                WMI_SERVICE_ROAM_OFFLOAD, len);
 558         SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 559                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 560         SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
 561                WMI_SERVICE_STA_PWRSAVE, len);
 562         SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 563                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 564         SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
 565                WMI_SERVICE_AP_UAPSD, len);
 566         SVCMAP(WMI_10_4_SERVICE_AP_DFS,
 567                WMI_SERVICE_AP_DFS, len);
 568         SVCMAP(WMI_10_4_SERVICE_11AC,
 569                WMI_SERVICE_11AC, len);
 570         SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
 571                WMI_SERVICE_BLOCKACK, len);
 572         SVCMAP(WMI_10_4_SERVICE_PHYERR,
 573                WMI_SERVICE_PHYERR, len);
 574         SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
 575                WMI_SERVICE_BCN_FILTER, len);
 576         SVCMAP(WMI_10_4_SERVICE_RTT,
 577                WMI_SERVICE_RTT, len);
 578         SVCMAP(WMI_10_4_SERVICE_RATECTRL,
 579                WMI_SERVICE_RATECTRL, len);
 580         SVCMAP(WMI_10_4_SERVICE_WOW,
 581                WMI_SERVICE_WOW, len);
 582         SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
 583                WMI_SERVICE_RATECTRL_CACHE, len);
 584         SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
 585                WMI_SERVICE_IRAM_TIDS, len);
 586         SVCMAP(WMI_10_4_SERVICE_BURST,
 587                WMI_SERVICE_BURST, len);
 588         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 589                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 590         SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
 591                WMI_SERVICE_GTK_OFFLOAD, len);
 592         SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
 593                WMI_SERVICE_SCAN_SCH, len);
 594         SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
 595                WMI_SERVICE_CSA_OFFLOAD, len);
 596         SVCMAP(WMI_10_4_SERVICE_CHATTER,
 597                WMI_SERVICE_CHATTER, len);
 598         SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
 599                WMI_SERVICE_COEX_FREQAVOID, len);
 600         SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 601                WMI_SERVICE_PACKET_POWER_SAVE, len);
 602         SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
 603                WMI_SERVICE_FORCE_FW_HANG, len);
 604         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 605                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 606         SVCMAP(WMI_10_4_SERVICE_GPIO,
 607                WMI_SERVICE_GPIO, len);
 608         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 609                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 610         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 611                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 612         SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 613                WMI_SERVICE_STA_KEEP_ALIVE, len);
 614         SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
 615                WMI_SERVICE_TX_ENCAP, len);
 616         SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 617                WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
 618         SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
 619                WMI_SERVICE_EARLY_RX, len);
 620         SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 621                WMI_SERVICE_ENHANCED_PROXY_STA, len);
 622         SVCMAP(WMI_10_4_SERVICE_TT,
 623                WMI_SERVICE_TT, len);
 624         SVCMAP(WMI_10_4_SERVICE_ATF,
 625                WMI_SERVICE_ATF, len);
 626         SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
 627                WMI_SERVICE_PEER_CACHING, len);
 628         SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
 629                WMI_SERVICE_COEX_GPIO, len);
 630         SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 631                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 632         SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 633                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 634         SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 635                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 636         SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 637                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 638         SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
 639                WMI_SERVICE_MESH_NON_11S, len);
 640         SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 641                WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
 642         SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
 643                WMI_SERVICE_PEER_STATS, len);
 644         SVCMAP(WMI_10_4_SERVICE_MESH_11S,
 645                WMI_SERVICE_MESH_11S, len);
 646 }
 647
 648 #undef SVCMAP
 649
 650 /* 2 word representation of MAC addr */
 651 struct wmi_mac_addr {
 652         union {
 653                 u8 addr[6];
 654                 struct {
 655                         u32 word0;
 656                         u32 word1;
 657                 } __packed;
 658         } __packed;
 659 } __packed;
 660
 661 struct wmi_cmd_map {
 662         u32 init_cmdid;
 663         u32 start_scan_cmdid;
 664         u32 stop_scan_cmdid;
 665         u32 scan_chan_list_cmdid;
 666         u32 scan_sch_prio_tbl_cmdid;
 667         u32 pdev_set_regdomain_cmdid;
 668         u32 pdev_set_channel_cmdid;
 669         u32 pdev_set_param_cmdid;
 670         u32 pdev_pktlog_enable_cmdid;
 671         u32 pdev_pktlog_disable_cmdid;
 672         u32 pdev_set_wmm_params_cmdid;
 673         u32 pdev_set_ht_cap_ie_cmdid;
 674         u32 pdev_set_vht_cap_ie_cmdid;
 675         u32 pdev_set_dscp_tid_map_cmdid;
 676         u32 pdev_set_quiet_mode_cmdid;
 677         u32 pdev_green_ap_ps_enable_cmdid;
 678         u32 pdev_get_tpc_config_cmdid;
 679         u32 pdev_set_base_macaddr_cmdid;
 680         u32 vdev_create_cmdid;
 681         u32 vdev_delete_cmdid;
 682         u32 vdev_start_request_cmdid;
 683         u32 vdev_restart_request_cmdid;
 684         u32 vdev_up_cmdid;
 685         u32 vdev_stop_cmdid;
 686         u32 vdev_down_cmdid;
 687         u32 vdev_set_param_cmdid;
 688         u32 vdev_install_key_cmdid;
 689         u32 peer_create_cmdid;
 690         u32 peer_delete_cmdid;
 691         u32 peer_flush_tids_cmdid;
 692         u32 peer_set_param_cmdid;
 693         u32 peer_assoc_cmdid;
 694         u32 peer_add_wds_entry_cmdid;
 695         u32 peer_remove_wds_entry_cmdid;
 696         u32 peer_mcast_group_cmdid;
 697         u32 bcn_tx_cmdid;
 698         u32 pdev_send_bcn_cmdid;
 699         u32 bcn_tmpl_cmdid;
 700         u32 bcn_filter_rx_cmdid;
 701         u32 prb_req_filter_rx_cmdid;
 702         u32 mgmt_tx_cmdid;
 703         u32 prb_tmpl_cmdid;
 704         u32 addba_clear_resp_cmdid;
 705         u32 addba_send_cmdid;
 706         u32 addba_status_cmdid;
 707         u32 delba_send_cmdid;
 708         u32 addba_set_resp_cmdid;
 709         u32 send_singleamsdu_cmdid;
 710         u32 sta_powersave_mode_cmdid;
 711         u32 sta_powersave_param_cmdid;
 712         u32 sta_mimo_ps_mode_cmdid;
 713         u32 pdev_dfs_enable_cmdid;
 714         u32 pdev_dfs_disable_cmdid;
 715         u32 roam_scan_mode;
 716         u32 roam_scan_rssi_threshold;
 717         u32 roam_scan_period;
 718         u32 roam_scan_rssi_change_threshold;
 719         u32 roam_ap_profile;
 720         u32 ofl_scan_add_ap_profile;
 721         u32 ofl_scan_remove_ap_profile;
 722         u32 ofl_scan_period;
 723         u32 p2p_dev_set_device_info;
 724         u32 p2p_dev_set_discoverability;
 725         u32 p2p_go_set_beacon_ie;
 726         u32 p2p_go_set_probe_resp_ie;
 727         u32 p2p_set_vendor_ie_data_cmdid;
 728         u32 ap_ps_peer_param_cmdid;
 729         u32 ap_ps_peer_uapsd_coex_cmdid;
 730         u32 peer_rate_retry_sched_cmdid;
 731         u32 wlan_profile_trigger_cmdid;
 732         u32 wlan_profile_set_hist_intvl_cmdid;
 733         u32 wlan_profile_get_profile_data_cmdid;
 734         u32 wlan_profile_enable_profile_id_cmdid;
 735         u32 wlan_profile_list_profile_id_cmdid;
 736         u32 pdev_suspend_cmdid;
 737         u32 pdev_resume_cmdid;
 738         u32 add_bcn_filter_cmdid;
 739         u32 rmv_bcn_filter_cmdid;
 740         u32 wow_add_wake_pattern_cmdid;
 741         u32 wow_del_wake_pattern_cmdid;
 742         u32 wow_enable_disable_wake_event_cmdid;
 743         u32 wow_enable_cmdid;
 744         u32 wow_hostwakeup_from_sleep_cmdid;
 745         u32 rtt_measreq_cmdid;
 746         u32 rtt_tsf_cmdid;
 747         u32 vdev_spectral_scan_configure_cmdid;
 748         u32 vdev_spectral_scan_enable_cmdid;
 749         u32 request_stats_cmdid;
 750         u32 set_arp_ns_offload_cmdid;
 751         u32 network_list_offload_config_cmdid;
 752         u32 gtk_offload_cmdid;
 753         u32 csa_offload_enable_cmdid;
 754         u32 csa_offload_chanswitch_cmdid;
 755         u32 chatter_set_mode_cmdid;
 756         u32 peer_tid_addba_cmdid;
 757         u32 peer_tid_delba_cmdid;
 758         u32 sta_dtim_ps_method_cmdid;
 759         u32 sta_uapsd_auto_trig_cmdid;
 760         u32 sta_keepalive_cmd;
 761         u32 echo_cmdid;
 762         u32 pdev_utf_cmdid;
 763         u32 dbglog_cfg_cmdid;
 764         u32 pdev_qvit_cmdid;
 765         u32 pdev_ftm_intg_cmdid;
 766         u32 vdev_set_keepalive_cmdid;
 767         u32 vdev_get_keepalive_cmdid;
 768         u32 force_fw_hang_cmdid;
 769         u32 gpio_config_cmdid;
 770         u32 gpio_output_cmdid;
 771         u32 pdev_get_temperature_cmdid;
 772         u32 vdev_set_wmm_params_cmdid;
 773         u32 tdls_set_state_cmdid;
 774         u32 tdls_peer_update_cmdid;
 775         u32 adaptive_qcs_cmdid;
 776         u32 scan_update_request_cmdid;
 777         u32 vdev_standby_response_cmdid;
 778         u32 vdev_resume_response_cmdid;
 779         u32 wlan_peer_caching_add_peer_cmdid;
 780         u32 wlan_peer_caching_evict_peer_cmdid;
 781         u32 wlan_peer_caching_restore_peer_cmdid;
 782         u32 wlan_peer_caching_print_all_peers_info_cmdid;
 783         u32 peer_update_wds_entry_cmdid;
 784         u32 peer_add_proxy_sta_entry_cmdid;
 785         u32 rtt_keepalive_cmdid;
 786         u32 oem_req_cmdid;
 787         u32 nan_cmdid;
 788         u32 vdev_ratemask_cmdid;
 789         u32 qboost_cfg_cmdid;
 790         u32 pdev_smart_ant_enable_cmdid;
 791         u32 pdev_smart_ant_set_rx_antenna_cmdid;
 792         u32 peer_smart_ant_set_tx_antenna_cmdid;
 793         u32 peer_smart_ant_set_train_info_cmdid;
 794         u32 peer_smart_ant_set_node_config_ops_cmdid;
 795         u32 pdev_set_antenna_switch_table_cmdid;
 796         u32 pdev_set_ctl_table_cmdid;
 797         u32 pdev_set_mimogain_table_cmdid;
 798         u32 pdev_ratepwr_table_cmdid;
 799         u32 pdev_ratepwr_chainmsk_table_cmdid;
 800         u32 pdev_fips_cmdid;
 801         u32 tt_set_conf_cmdid;
 802         u32 fwtest_cmdid;
 803         u32 vdev_atf_request_cmdid;
 804         u32 peer_atf_request_cmdid;
 805         u32 pdev_get_ani_cck_config_cmdid;
 806         u32 pdev_get_ani_ofdm_config_cmdid;
 807         u32 pdev_reserve_ast_entry_cmdid;
 808         u32 pdev_get_nfcal_power_cmdid;
 809         u32 pdev_get_tpc_cmdid;
 810         u32 pdev_get_ast_info_cmdid;
 811         u32 vdev_set_dscp_tid_map_cmdid;
 812         u32 pdev_get_info_cmdid;
 813         u32 vdev_get_info_cmdid;
 814         u32 vdev_filter_neighbor_rx_packets_cmdid;
 815         u32 mu_cal_start_cmdid;
 816         u32 set_cca_params_cmdid;
 817         u32 pdev_bss_chan_info_request_cmdid;
 818         u32 pdev_enable_adaptive_cca_cmdid;
 819 };
 820
 821 /*
 822  * wmi command groups.
 823  */
 824 enum wmi_cmd_group {
 825         /* 0 to 2 are reserved */
 826         WMI_GRP_START = 0x3,
 827         WMI_GRP_SCAN = WMI_GRP_START,
 828         WMI_GRP_PDEV,
 829         WMI_GRP_VDEV,
 830         WMI_GRP_PEER,
 831         WMI_GRP_MGMT,
 832         WMI_GRP_BA_NEG,
 833         WMI_GRP_STA_PS,
 834         WMI_GRP_DFS,
 835         WMI_GRP_ROAM,
 836         WMI_GRP_OFL_SCAN,
 837         WMI_GRP_P2P,
 838         WMI_GRP_AP_PS,
 839         WMI_GRP_RATE_CTRL,
 840         WMI_GRP_PROFILE,
 841         WMI_GRP_SUSPEND,
 842         WMI_GRP_BCN_FILTER,
 843         WMI_GRP_WOW,
 844         WMI_GRP_RTT,
 845         WMI_GRP_SPECTRAL,
 846         WMI_GRP_STATS,
 847         WMI_GRP_ARP_NS_OFL,
 848         WMI_GRP_NLO_OFL,
 849         WMI_GRP_GTK_OFL,
 850         WMI_GRP_CSA_OFL,
 851         WMI_GRP_CHATTER,
 852         WMI_GRP_TID_ADDBA,
 853         WMI_GRP_MISC,
 854         WMI_GRP_GPIO,
 855 };
 856
 857 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
 858 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
 859
 860 #define WMI_CMD_UNSUPPORTED 0
 861
 862 /* Command IDs and command events for MAIN FW. */
 863 enum wmi_cmd_id {
 864         WMI_INIT_CMDID = 0x1,
 865
 866         /* Scan specific commands */
 867         WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
 868         WMI_STOP_SCAN_CMDID,
 869         WMI_SCAN_CHAN_LIST_CMDID,
 870         WMI_SCAN_SCH_PRIO_TBL_CMDID,
 871
 872         /* PDEV (physical device) specific commands */
 873         WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
 874         WMI_PDEV_SET_CHANNEL_CMDID,
 875         WMI_PDEV_SET_PARAM_CMDID,
 876         WMI_PDEV_PKTLOG_ENABLE_CMDID,
 877         WMI_PDEV_PKTLOG_DISABLE_CMDID,
 878         WMI_PDEV_SET_WMM_PARAMS_CMDID,
 879         WMI_PDEV_SET_HT_CAP_IE_CMDID,
 880         WMI_PDEV_SET_VHT_CAP_IE_CMDID,
 881         WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
 882         WMI_PDEV_SET_QUIET_MODE_CMDID,
 883         WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
 884         WMI_PDEV_GET_TPC_CONFIG_CMDID,
 885         WMI_PDEV_SET_BASE_MACADDR_CMDID,
 886
 887         /* VDEV (virtual device) specific commands */
 888         WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
 889         WMI_VDEV_DELETE_CMDID,
 890         WMI_VDEV_START_REQUEST_CMDID,
 891         WMI_VDEV_RESTART_REQUEST_CMDID,
 892         WMI_VDEV_UP_CMDID,
 893         WMI_VDEV_STOP_CMDID,
 894         WMI_VDEV_DOWN_CMDID,
 895         WMI_VDEV_SET_PARAM_CMDID,
 896         WMI_VDEV_INSTALL_KEY_CMDID,
 897
 898         /* peer specific commands */
 899         WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
 900         WMI_PEER_DELETE_CMDID,
 901         WMI_PEER_FLUSH_TIDS_CMDID,
 902         WMI_PEER_SET_PARAM_CMDID,
 903         WMI_PEER_ASSOC_CMDID,
 904         WMI_PEER_ADD_WDS_ENTRY_CMDID,
 905         WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
 906         WMI_PEER_MCAST_GROUP_CMDID,
 907
 908         /* beacon/management specific commands */
 909         WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
 910         WMI_PDEV_SEND_BCN_CMDID,
 911         WMI_BCN_TMPL_CMDID,
 912         WMI_BCN_FILTER_RX_CMDID,
 913         WMI_PRB_REQ_FILTER_RX_CMDID,
 914         WMI_MGMT_TX_CMDID,
 915         WMI_PRB_TMPL_CMDID,
 916
 917         /* commands to directly control BA negotiation directly from host. */
 918         WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
 919         WMI_ADDBA_SEND_CMDID,
 920         WMI_ADDBA_STATUS_CMDID,
 921         WMI_DELBA_SEND_CMDID,
 922         WMI_ADDBA_SET_RESP_CMDID,
 923         WMI_SEND_SINGLEAMSDU_CMDID,
 924
 925         /* Station power save specific config */
 926         WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
 927         WMI_STA_POWERSAVE_PARAM_CMDID,
 928         WMI_STA_MIMO_PS_MODE_CMDID,
 929
 930         /** DFS-specific commands */
 931         WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
 932         WMI_PDEV_DFS_DISABLE_CMDID,
 933
 934         /* Roaming specific  commands */
 935         WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
 936         WMI_ROAM_SCAN_RSSI_THRESHOLD,
 937         WMI_ROAM_SCAN_PERIOD,
 938         WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
 939         WMI_ROAM_AP_PROFILE,
 940
 941         /* offload scan specific commands */
 942         WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
 943         WMI_OFL_SCAN_REMOVE_AP_PROFILE,
 944         WMI_OFL_SCAN_PERIOD,
 945
 946         /* P2P specific commands */
 947         WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
 948         WMI_P2P_DEV_SET_DISCOVERABILITY,
 949         WMI_P2P_GO_SET_BEACON_IE,
 950         WMI_P2P_GO_SET_PROBE_RESP_IE,
 951         WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
 952
 953         /* AP power save specific config */
 954         WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
 955         WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
 956
 957         /* Rate-control specific commands */
 958         WMI_PEER_RATE_RETRY_SCHED_CMDID =
 959         WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
 960
 961         /* WLAN Profiling commands. */
 962         WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
 963         WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
 964         WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
 965         WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
 966         WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
 967
 968         /* Suspend resume command Ids */
 969         WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
 970         WMI_PDEV_RESUME_CMDID,
 971
 972         /* Beacon filter commands */
 973         WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
 974         WMI_RMV_BCN_FILTER_CMDID,
 975
 976         /* WOW Specific WMI commands*/
 977         WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
 978         WMI_WOW_DEL_WAKE_PATTERN_CMDID,
 979         WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
 980         WMI_WOW_ENABLE_CMDID,
 981         WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
 982
 983         /* RTT measurement related cmd */
 984         WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
 985         WMI_RTT_TSF_CMDID,
 986
 987         /* spectral scan commands */
 988         WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
 989         WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
 990
 991         /* F/W stats */
 992         WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
 993
 994         /* ARP OFFLOAD REQUEST*/
 995         WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
 996
 997         /* NS offload confid*/
 998         WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
 999
1000         /* GTK offload Specific WMI commands*/
1001         WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1002
1003         /* CSA offload Specific WMI commands*/
1004         WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1005         WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1006
1007         /* Chatter commands*/
1008         WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1009
1010         /* addba specific commands */
1011         WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1012         WMI_PEER_TID_DELBA_CMDID,
1013
1014         /* set station mimo powersave method */
1015         WMI_STA_DTIM_PS_METHOD_CMDID,
1016         /* Configure the Station UAPSD AC Auto Trigger Parameters */
1017         WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1018
1019         /* STA Keep alive parameter configuration,
1020            Requires WMI_SERVICE_STA_KEEP_ALIVE */
1021         WMI_STA_KEEPALIVE_CMD,
1022
1023         /* misc command group */
1024         WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1025         WMI_PDEV_UTF_CMDID,
1026         WMI_DBGLOG_CFG_CMDID,
1027         WMI_PDEV_QVIT_CMDID,
1028         WMI_PDEV_FTM_INTG_CMDID,
1029         WMI_VDEV_SET_KEEPALIVE_CMDID,
1030         WMI_VDEV_GET_KEEPALIVE_CMDID,
1031         WMI_FORCE_FW_HANG_CMDID,
1032
1033         /* GPIO Configuration */
1034         WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1035         WMI_GPIO_OUTPUT_CMDID,
1036 };
1037
1038 enum wmi_event_id {
1039         WMI_SERVICE_READY_EVENTID = 0x1,
1040         WMI_READY_EVENTID,
1041
1042         /* Scan specific events */
1043         WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1044
1045         /* PDEV specific events */
1046         WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1047         WMI_CHAN_INFO_EVENTID,
1048         WMI_PHYERR_EVENTID,
1049
1050         /* VDEV specific events */
1051         WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1052         WMI_VDEV_STOPPED_EVENTID,
1053         WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1054
1055         /* peer specific events */
1056         WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1057
1058         /* beacon/mgmt specific events */
1059         WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1060         WMI_HOST_SWBA_EVENTID,
1061         WMI_TBTTOFFSET_UPDATE_EVENTID,
1062
1063         /* ADDBA Related WMI Events*/
1064         WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1065         WMI_TX_ADDBA_COMPLETE_EVENTID,
1066
1067         /* Roam event to trigger roaming on host */
1068         WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1069         WMI_PROFILE_MATCH,
1070
1071         /* WoW */
1072         WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1073
1074         /* RTT */
1075         WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1076         WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1077         WMI_RTT_ERROR_REPORT_EVENTID,
1078
1079         /* GTK offload */
1080         WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1081         WMI_GTK_REKEY_FAIL_EVENTID,
1082
1083         /* CSA IE received event */
1084         WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1085
1086         /* Misc events */
1087         WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1088         WMI_PDEV_UTF_EVENTID,
1089         WMI_DEBUG_MESG_EVENTID,
1090         WMI_UPDATE_STATS_EVENTID,
1091         WMI_DEBUG_PRINT_EVENTID,
1092         WMI_DCS_INTERFERENCE_EVENTID,
1093         WMI_PDEV_QVIT_EVENTID,
1094         WMI_WLAN_PROFILE_DATA_EVENTID,
1095         WMI_PDEV_FTM_INTG_EVENTID,
1096         WMI_WLAN_FREQ_AVOID_EVENTID,
1097         WMI_VDEV_GET_KEEPALIVE_EVENTID,
1098
1099         /* GPIO Event */
1100         WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1101 };
1102
1103 /* Command IDs and command events for 10.X firmware */
1104 enum wmi_10x_cmd_id {
1105         WMI_10X_START_CMDID = 0x9000,
1106         WMI_10X_END_CMDID = 0x9FFF,
1107
1108         /* initialize the wlan sub system */
1109         WMI_10X_INIT_CMDID,
1110
1111         /* Scan specific commands */
1112
1113         WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1114         WMI_10X_STOP_SCAN_CMDID,
1115         WMI_10X_SCAN_CHAN_LIST_CMDID,
1116         WMI_10X_ECHO_CMDID,
1117
1118         /* PDEV(physical device) specific commands */
1119         WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1120         WMI_10X_PDEV_SET_CHANNEL_CMDID,
1121         WMI_10X_PDEV_SET_PARAM_CMDID,
1122         WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1123         WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1124         WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1125         WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1126         WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1127         WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1128         WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1129         WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1130         WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1131         WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1132
1133         /* VDEV(virtual device) specific commands */
1134         WMI_10X_VDEV_CREATE_CMDID,
1135         WMI_10X_VDEV_DELETE_CMDID,
1136         WMI_10X_VDEV_START_REQUEST_CMDID,
1137         WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1138         WMI_10X_VDEV_UP_CMDID,
1139         WMI_10X_VDEV_STOP_CMDID,
1140         WMI_10X_VDEV_DOWN_CMDID,
1141         WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1142         WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1143         WMI_10X_VDEV_SET_PARAM_CMDID,
1144         WMI_10X_VDEV_INSTALL_KEY_CMDID,
1145
1146         /* peer specific commands */
1147         WMI_10X_PEER_CREATE_CMDID,
1148         WMI_10X_PEER_DELETE_CMDID,
1149         WMI_10X_PEER_FLUSH_TIDS_CMDID,
1150         WMI_10X_PEER_SET_PARAM_CMDID,
1151         WMI_10X_PEER_ASSOC_CMDID,
1152         WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1153         WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1154         WMI_10X_PEER_MCAST_GROUP_CMDID,
1155
1156         /* beacon/management specific commands */
1157
1158         WMI_10X_BCN_TX_CMDID,
1159         WMI_10X_BCN_PRB_TMPL_CMDID,
1160         WMI_10X_BCN_FILTER_RX_CMDID,
1161         WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1162         WMI_10X_MGMT_TX_CMDID,
1163
1164         /* commands to directly control ba negotiation directly from host. */
1165         WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1166         WMI_10X_ADDBA_SEND_CMDID,
1167         WMI_10X_ADDBA_STATUS_CMDID,
1168         WMI_10X_DELBA_SEND_CMDID,
1169         WMI_10X_ADDBA_SET_RESP_CMDID,
1170         WMI_10X_SEND_SINGLEAMSDU_CMDID,
1171
1172         /* Station power save specific config */
1173         WMI_10X_STA_POWERSAVE_MODE_CMDID,
1174         WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1175         WMI_10X_STA_MIMO_PS_MODE_CMDID,
1176
1177         /* set debug log config */
1178         WMI_10X_DBGLOG_CFG_CMDID,
1179
1180         /* DFS-specific commands */
1181         WMI_10X_PDEV_DFS_ENABLE_CMDID,
1182         WMI_10X_PDEV_DFS_DISABLE_CMDID,
1183
1184         /* QVIT specific command id */
1185         WMI_10X_PDEV_QVIT_CMDID,
1186
1187         /* Offload Scan and Roaming related  commands */
1188         WMI_10X_ROAM_SCAN_MODE,
1189         WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1190         WMI_10X_ROAM_SCAN_PERIOD,
1191         WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1192         WMI_10X_ROAM_AP_PROFILE,
1193         WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1194         WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1195         WMI_10X_OFL_SCAN_PERIOD,
1196
1197         /* P2P specific commands */
1198         WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1199         WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1200         WMI_10X_P2P_GO_SET_BEACON_IE,
1201         WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1202
1203         /* AP power save specific config */
1204         WMI_10X_AP_PS_PEER_PARAM_CMDID,
1205         WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1206
1207         /* Rate-control specific commands */
1208         WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1209
1210         /* WLAN Profiling commands. */
1211         WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1212         WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1213         WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1214         WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1215         WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1216
1217         /* Suspend resume command Ids */
1218         WMI_10X_PDEV_SUSPEND_CMDID,
1219         WMI_10X_PDEV_RESUME_CMDID,
1220
1221         /* Beacon filter commands */
1222         WMI_10X_ADD_BCN_FILTER_CMDID,
1223         WMI_10X_RMV_BCN_FILTER_CMDID,
1224
1225         /* WOW Specific WMI commands*/
1226         WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1227         WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1228         WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1229         WMI_10X_WOW_ENABLE_CMDID,
1230         WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1231
1232         /* RTT measurement related cmd */
1233         WMI_10X_RTT_MEASREQ_CMDID,
1234         WMI_10X_RTT_TSF_CMDID,
1235
1236         /* transmit beacon by value */
1237         WMI_10X_PDEV_SEND_BCN_CMDID,
1238
1239         /* F/W stats */
1240         WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1241         WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1242         WMI_10X_REQUEST_STATS_CMDID,
1243
1244         /* GPIO Configuration */
1245         WMI_10X_GPIO_CONFIG_CMDID,
1246         WMI_10X_GPIO_OUTPUT_CMDID,
1247
1248         WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1249 };
1250
1251 enum wmi_10x_event_id {
1252         WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1253         WMI_10X_READY_EVENTID,
1254         WMI_10X_START_EVENTID = 0x9000,
1255         WMI_10X_END_EVENTID = 0x9FFF,
1256
1257         /* Scan specific events */
1258         WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1259         WMI_10X_ECHO_EVENTID,
1260         WMI_10X_DEBUG_MESG_EVENTID,
1261         WMI_10X_UPDATE_STATS_EVENTID,
1262
1263         /* Instantaneous RSSI event */
1264         WMI_10X_INST_RSSI_STATS_EVENTID,
1265
1266         /* VDEV specific events */
1267         WMI_10X_VDEV_START_RESP_EVENTID,
1268         WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1269         WMI_10X_VDEV_RESUME_REQ_EVENTID,
1270         WMI_10X_VDEV_STOPPED_EVENTID,
1271
1272         /* peer  specific events */
1273         WMI_10X_PEER_STA_KICKOUT_EVENTID,
1274
1275         /* beacon/mgmt specific events */
1276         WMI_10X_HOST_SWBA_EVENTID,
1277         WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1278         WMI_10X_MGMT_RX_EVENTID,
1279
1280         /* Channel stats event */
1281         WMI_10X_CHAN_INFO_EVENTID,
1282
1283         /* PHY Error specific WMI event */
1284         WMI_10X_PHYERR_EVENTID,
1285
1286         /* Roam event to trigger roaming on host */
1287         WMI_10X_ROAM_EVENTID,
1288
1289         /* matching AP found from list of profiles */
1290         WMI_10X_PROFILE_MATCH,
1291
1292         /* debug print message used for tracing FW code while debugging */
1293         WMI_10X_DEBUG_PRINT_EVENTID,
1294         /* VI spoecific event */
1295         WMI_10X_PDEV_QVIT_EVENTID,
1296         /* FW code profile data in response to profile request */
1297         WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1298
1299         /*RTT related event ID*/
1300         WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1301         WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1302         WMI_10X_RTT_ERROR_REPORT_EVENTID,
1303
1304         WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1305         WMI_10X_DCS_INTERFERENCE_EVENTID,
1306
1307         /* TPC config for the current operating channel */
1308         WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1309
1310         WMI_10X_GPIO_INPUT_EVENTID,
1311         WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1,
1312 };
1313
1314 enum wmi_10_2_cmd_id {
1315         WMI_10_2_START_CMDID = 0x9000,
1316         WMI_10_2_END_CMDID = 0x9FFF,
1317         WMI_10_2_INIT_CMDID,
1318         WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1319         WMI_10_2_STOP_SCAN_CMDID,
1320         WMI_10_2_SCAN_CHAN_LIST_CMDID,
1321         WMI_10_2_ECHO_CMDID,
1322         WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1323         WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1324         WMI_10_2_PDEV_SET_PARAM_CMDID,
1325         WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1326         WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1327         WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1328         WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1329         WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1330         WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1331         WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1332         WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1333         WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1334         WMI_10_2_VDEV_CREATE_CMDID,
1335         WMI_10_2_VDEV_DELETE_CMDID,
1336         WMI_10_2_VDEV_START_REQUEST_CMDID,
1337         WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1338         WMI_10_2_VDEV_UP_CMDID,
1339         WMI_10_2_VDEV_STOP_CMDID,
1340         WMI_10_2_VDEV_DOWN_CMDID,
1341         WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1342         WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1343         WMI_10_2_VDEV_SET_PARAM_CMDID,
1344         WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1345         WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1346         WMI_10_2_PEER_CREATE_CMDID,
1347         WMI_10_2_PEER_DELETE_CMDID,
1348         WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1349         WMI_10_2_PEER_SET_PARAM_CMDID,
1350         WMI_10_2_PEER_ASSOC_CMDID,
1351         WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1352         WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1353         WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1354         WMI_10_2_PEER_MCAST_GROUP_CMDID,
1355         WMI_10_2_BCN_TX_CMDID,
1356         WMI_10_2_BCN_PRB_TMPL_CMDID,
1357         WMI_10_2_BCN_FILTER_RX_CMDID,
1358         WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1359         WMI_10_2_MGMT_TX_CMDID,
1360         WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1361         WMI_10_2_ADDBA_SEND_CMDID,
1362         WMI_10_2_ADDBA_STATUS_CMDID,
1363         WMI_10_2_DELBA_SEND_CMDID,
1364         WMI_10_2_ADDBA_SET_RESP_CMDID,
1365         WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1366         WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1367         WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1368         WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1369         WMI_10_2_DBGLOG_CFG_CMDID,
1370         WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1371         WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1372         WMI_10_2_PDEV_QVIT_CMDID,
1373         WMI_10_2_ROAM_SCAN_MODE,
1374         WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1375         WMI_10_2_ROAM_SCAN_PERIOD,
1376         WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1377         WMI_10_2_ROAM_AP_PROFILE,
1378         WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1379         WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1380         WMI_10_2_OFL_SCAN_PERIOD,
1381         WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1382         WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1383         WMI_10_2_P2P_GO_SET_BEACON_IE,
1384         WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1385         WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1386         WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1387         WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1388         WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1389         WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1390         WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1391         WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1392         WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1393         WMI_10_2_PDEV_SUSPEND_CMDID,
1394         WMI_10_2_PDEV_RESUME_CMDID,
1395         WMI_10_2_ADD_BCN_FILTER_CMDID,
1396         WMI_10_2_RMV_BCN_FILTER_CMDID,
1397         WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1398         WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1399         WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1400         WMI_10_2_WOW_ENABLE_CMDID,
1401         WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1402         WMI_10_2_RTT_MEASREQ_CMDID,
1403         WMI_10_2_RTT_TSF_CMDID,
1404         WMI_10_2_RTT_KEEPALIVE_CMDID,
1405         WMI_10_2_PDEV_SEND_BCN_CMDID,
1406         WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1407         WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1408         WMI_10_2_REQUEST_STATS_CMDID,
1409         WMI_10_2_GPIO_CONFIG_CMDID,
1410         WMI_10_2_GPIO_OUTPUT_CMDID,
1411         WMI_10_2_VDEV_RATEMASK_CMDID,
1412         WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1413         WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1414         WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1415         WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1416         WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1417         WMI_10_2_FORCE_FW_HANG_CMDID,
1418         WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1419         WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1420         WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1421         WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1422         WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1423         WMI_10_2_PDEV_GET_INFO,
1424         WMI_10_2_VDEV_GET_INFO,
1425         WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1426         WMI_10_2_PEER_ATF_REQUEST_CMDID,
1427         WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1428         WMI_10_2_MU_CAL_START_CMDID,
1429         WMI_10_2_SET_LTEU_CONFIG_CMDID,
1430         WMI_10_2_SET_CCA_PARAMS,
1431         WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1432 };
1433
1434 enum wmi_10_2_event_id {
1435         WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1436         WMI_10_2_READY_EVENTID,
1437         WMI_10_2_DEBUG_MESG_EVENTID,
1438         WMI_10_2_START_EVENTID = 0x9000,
1439         WMI_10_2_END_EVENTID = 0x9FFF,
1440         WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1441         WMI_10_2_ECHO_EVENTID,
1442         WMI_10_2_UPDATE_STATS_EVENTID,
1443         WMI_10_2_INST_RSSI_STATS_EVENTID,
1444         WMI_10_2_VDEV_START_RESP_EVENTID,
1445         WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1446         WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1447         WMI_10_2_VDEV_STOPPED_EVENTID,
1448         WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1449         WMI_10_2_HOST_SWBA_EVENTID,
1450         WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1451         WMI_10_2_MGMT_RX_EVENTID,
1452         WMI_10_2_CHAN_INFO_EVENTID,
1453         WMI_10_2_PHYERR_EVENTID,
1454         WMI_10_2_ROAM_EVENTID,
1455         WMI_10_2_PROFILE_MATCH,
1456         WMI_10_2_DEBUG_PRINT_EVENTID,
1457         WMI_10_2_PDEV_QVIT_EVENTID,
1458         WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1459         WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1460         WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1461         WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1462         WMI_10_2_RTT_KEEPALIVE_EVENTID,
1463         WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1464         WMI_10_2_DCS_INTERFERENCE_EVENTID,
1465         WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1466         WMI_10_2_GPIO_INPUT_EVENTID,
1467         WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1468         WMI_10_2_GENERIC_BUFFER_EVENTID,
1469         WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1470         WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1471         WMI_10_2_WDS_PEER_EVENTID,
1472         WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1473         WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1474         WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1475 };
1476
1477 enum wmi_10_4_cmd_id {
1478         WMI_10_4_START_CMDID = 0x9000,
1479         WMI_10_4_END_CMDID = 0x9FFF,
1480         WMI_10_4_INIT_CMDID,
1481         WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1482         WMI_10_4_STOP_SCAN_CMDID,
1483         WMI_10_4_SCAN_CHAN_LIST_CMDID,
1484         WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1485         WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1486         WMI_10_4_ECHO_CMDID,
1487         WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1488         WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1489         WMI_10_4_PDEV_SET_PARAM_CMDID,
1490         WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1491         WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1492         WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1493         WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1494         WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1495         WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1496         WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1497         WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1498         WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1499         WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1500         WMI_10_4_VDEV_CREATE_CMDID,
1501         WMI_10_4_VDEV_DELETE_CMDID,
1502         WMI_10_4_VDEV_START_REQUEST_CMDID,
1503         WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1504         WMI_10_4_VDEV_UP_CMDID,
1505         WMI_10_4_VDEV_STOP_CMDID,
1506         WMI_10_4_VDEV_DOWN_CMDID,
1507         WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1508         WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1509         WMI_10_4_VDEV_SET_PARAM_CMDID,
1510         WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1511         WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1512         WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1513         WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1514         WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1515         WMI_10_4_PEER_CREATE_CMDID,
1516         WMI_10_4_PEER_DELETE_CMDID,
1517         WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1518         WMI_10_4_PEER_SET_PARAM_CMDID,
1519         WMI_10_4_PEER_ASSOC_CMDID,
1520         WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1521         WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1522         WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1523         WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1524         WMI_10_4_PEER_MCAST_GROUP_CMDID,
1525         WMI_10_4_BCN_TX_CMDID,
1526         WMI_10_4_PDEV_SEND_BCN_CMDID,
1527         WMI_10_4_BCN_PRB_TMPL_CMDID,
1528         WMI_10_4_BCN_FILTER_RX_CMDID,
1529         WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1530         WMI_10_4_MGMT_TX_CMDID,
1531         WMI_10_4_PRB_TMPL_CMDID,
1532         WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1533         WMI_10_4_ADDBA_SEND_CMDID,
1534         WMI_10_4_ADDBA_STATUS_CMDID,
1535         WMI_10_4_DELBA_SEND_CMDID,
1536         WMI_10_4_ADDBA_SET_RESP_CMDID,
1537         WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1538         WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1539         WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1540         WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1541         WMI_10_4_DBGLOG_CFG_CMDID,
1542         WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1543         WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1544         WMI_10_4_PDEV_QVIT_CMDID,
1545         WMI_10_4_ROAM_SCAN_MODE,
1546         WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1547         WMI_10_4_ROAM_SCAN_PERIOD,
1548         WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1549         WMI_10_4_ROAM_AP_PROFILE,
1550         WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1551         WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1552         WMI_10_4_OFL_SCAN_PERIOD,
1553         WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1554         WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1555         WMI_10_4_P2P_GO_SET_BEACON_IE,
1556         WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1557         WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1558         WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1559         WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1560         WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1561         WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1562         WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1563         WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1564         WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1565         WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1566         WMI_10_4_PDEV_SUSPEND_CMDID,
1567         WMI_10_4_PDEV_RESUME_CMDID,
1568         WMI_10_4_ADD_BCN_FILTER_CMDID,
1569         WMI_10_4_RMV_BCN_FILTER_CMDID,
1570         WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1571         WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1572         WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1573         WMI_10_4_WOW_ENABLE_CMDID,
1574         WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1575         WMI_10_4_RTT_MEASREQ_CMDID,
1576         WMI_10_4_RTT_TSF_CMDID,
1577         WMI_10_4_RTT_KEEPALIVE_CMDID,
1578         WMI_10_4_OEM_REQ_CMDID,
1579         WMI_10_4_NAN_CMDID,
1580         WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1581         WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1582         WMI_10_4_REQUEST_STATS_CMDID,
1583         WMI_10_4_GPIO_CONFIG_CMDID,
1584         WMI_10_4_GPIO_OUTPUT_CMDID,
1585         WMI_10_4_VDEV_RATEMASK_CMDID,
1586         WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1587         WMI_10_4_GTK_OFFLOAD_CMDID,
1588         WMI_10_4_QBOOST_CFG_CMDID,
1589         WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1590         WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1591         WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1592         WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1593         WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1594         WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1595         WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1596         WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1597         WMI_10_4_FORCE_FW_HANG_CMDID,
1598         WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1599         WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1600         WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1601         WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1602         WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1603         WMI_10_4_PDEV_FIPS_CMDID,
1604         WMI_10_4_TT_SET_CONF_CMDID,
1605         WMI_10_4_FWTEST_CMDID,
1606         WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1607         WMI_10_4_PEER_ATF_REQUEST_CMDID,
1608         WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1609         WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1610         WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1611         WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1612         WMI_10_4_PDEV_GET_TPC_CMDID,
1613         WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1614         WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1615         WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1616         WMI_10_4_PDEV_GET_INFO_CMDID,
1617         WMI_10_4_VDEV_GET_INFO_CMDID,
1618         WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1619         WMI_10_4_MU_CAL_START_CMDID,
1620         WMI_10_4_SET_CCA_PARAMS_CMDID,
1621         WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1622         WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1623         WMI_10_4_VDEV_SET_IE_CMDID,
1624         WMI_10_4_SET_LTEU_CONFIG_CMDID,
1625         WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1626 };
1627
1628 enum wmi_10_4_event_id {
1629         WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1630         WMI_10_4_READY_EVENTID,
1631         WMI_10_4_DEBUG_MESG_EVENTID,
1632         WMI_10_4_START_EVENTID = 0x9000,
1633         WMI_10_4_END_EVENTID = 0x9FFF,
1634         WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1635         WMI_10_4_ECHO_EVENTID,
1636         WMI_10_4_UPDATE_STATS_EVENTID,
1637         WMI_10_4_INST_RSSI_STATS_EVENTID,
1638         WMI_10_4_VDEV_START_RESP_EVENTID,
1639         WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1640         WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1641         WMI_10_4_VDEV_STOPPED_EVENTID,
1642         WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1643         WMI_10_4_HOST_SWBA_EVENTID,
1644         WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1645         WMI_10_4_MGMT_RX_EVENTID,
1646         WMI_10_4_CHAN_INFO_EVENTID,
1647         WMI_10_4_PHYERR_EVENTID,
1648         WMI_10_4_ROAM_EVENTID,
1649         WMI_10_4_PROFILE_MATCH,
1650         WMI_10_4_DEBUG_PRINT_EVENTID,
1651         WMI_10_4_PDEV_QVIT_EVENTID,
1652         WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1653         WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1654         WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1655         WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1656         WMI_10_4_RTT_KEEPALIVE_EVENTID,
1657         WMI_10_4_OEM_CAPABILITY_EVENTID,
1658         WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1659         WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1660         WMI_10_4_NAN_EVENTID,
1661         WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1662         WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1663         WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1664         WMI_10_4_DCS_INTERFERENCE_EVENTID,
1665         WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1666         WMI_10_4_CSA_HANDLING_EVENTID,
1667         WMI_10_4_GPIO_INPUT_EVENTID,
1668         WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1669         WMI_10_4_GENERIC_BUFFER_EVENTID,
1670         WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1671         WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1672         WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1673         WMI_10_4_WDS_PEER_EVENTID,
1674         WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1675         WMI_10_4_PDEV_FIPS_EVENTID,
1676         WMI_10_4_TT_STATS_EVENTID,
1677         WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1678         WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1679         WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1680         WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1681         WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1682         WMI_10_4_PDEV_TPC_EVENTID,
1683         WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1684         WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1685         WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1686         WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1687         WMI_10_4_MU_REPORT_EVENTID,
1688         WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1689 };
1690
1691 enum wmi_phy_mode {
1692         MODE_11A        = 0,   /* 11a Mode */
1693         MODE_11G        = 1,   /* 11b/g Mode */
1694         MODE_11B        = 2,   /* 11b Mode */
1695         MODE_11GONLY    = 3,   /* 11g only Mode */
1696         MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1697         MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1698         MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1699         MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1700         MODE_11AC_VHT20 = 8,
1701         MODE_11AC_VHT40 = 9,
1702         MODE_11AC_VHT80 = 10,
1703         /*    MODE_11AC_VHT160 = 11, */
1704         MODE_11AC_VHT20_2G = 11,
1705         MODE_11AC_VHT40_2G = 12,
1706         MODE_11AC_VHT80_2G = 13,
1707         MODE_UNKNOWN    = 14,
1708         MODE_MAX        = 14
1709 };
1710
1711 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1712 {
1713         switch (mode) {
1714         case MODE_11A:
1715                 return "11a";
1716         case MODE_11G:
1717                 return "11g";
1718         case MODE_11B:
1719                 return "11b";
1720         case MODE_11GONLY:
1721                 return "11gonly";
1722         case MODE_11NA_HT20:
1723                 return "11na-ht20";
1724         case MODE_11NG_HT20:
1725                 return "11ng-ht20";
1726         case MODE_11NA_HT40:
1727                 return "11na-ht40";
1728         case MODE_11NG_HT40:
1729                 return "11ng-ht40";
1730         case MODE_11AC_VHT20:
1731                 return "11ac-vht20";
1732         case MODE_11AC_VHT40:
1733                 return "11ac-vht40";
1734         case MODE_11AC_VHT80:
1735                 return "11ac-vht80";
1736         case MODE_11AC_VHT20_2G:
1737                 return "11ac-vht20-2g";
1738         case MODE_11AC_VHT40_2G:
1739                 return "11ac-vht40-2g";
1740         case MODE_11AC_VHT80_2G:
1741                 return "11ac-vht80-2g";
1742         case MODE_UNKNOWN:
1743                 /* skip */
1744                 break;
1745
1746                 /* no default handler to allow compiler to check that the
1747                  * enum is fully handled */
1748         };
1749
1750         return "<unknown>";
1751 }
1752
1753 #define WMI_CHAN_LIST_TAG       0x1
1754 #define WMI_SSID_LIST_TAG       0x2
1755 #define WMI_BSSID_LIST_TAG      0x3
1756 #define WMI_IE_TAG              0x4
1757
1758 struct wmi_channel {
1759         __le32 mhz;
1760         __le32 band_center_freq1;
1761         __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
1762         union {
1763                 __le32 flags; /* WMI_CHAN_FLAG_ */
1764                 struct {
1765                         u8 mode; /* only 6 LSBs */
1766                 } __packed;
1767         } __packed;
1768         union {
1769                 __le32 reginfo0;
1770                 struct {
1771                         /* note: power unit is 0.5 dBm */
1772                         u8 min_power;
1773                         u8 max_power;
1774                         u8 reg_power;
1775                         u8 reg_classid;
1776                 } __packed;
1777         } __packed;
1778         union {
1779                 __le32 reginfo1;
1780                 struct {
1781                         u8 antenna_max;
1782                 } __packed;
1783         } __packed;
1784 } __packed;
1785
1786 struct wmi_channel_arg {
1787         u32 freq;
1788         u32 band_center_freq1;
1789         bool passive;
1790         bool allow_ibss;
1791         bool allow_ht;
1792         bool allow_vht;
1793         bool ht40plus;
1794         bool chan_radar;
1795         /* note: power unit is 0.5 dBm */
1796         u32 min_power;
1797         u32 max_power;
1798         u32 max_reg_power;
1799         u32 max_antenna_gain;
1800         u32 reg_class_id;
1801         enum wmi_phy_mode mode;
1802 };
1803
1804 enum wmi_channel_change_cause {
1805         WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
1806         WMI_CHANNEL_CHANGE_CAUSE_CSA,
1807 };
1808
1809 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
1810 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
1811 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
1812 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
1813 #define WMI_CHAN_FLAG_DFS            (1 << 10)
1814 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
1815 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
1816
1817 /* Indicate reason for channel switch */
1818 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
1819
1820 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
1821
1822 /* HT Capabilities*/
1823 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
1824 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
1825 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
1826 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
1827 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
1828 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
1829 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
1830 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
1831 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
1832 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
1833 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
1834 #define WMI_HT_CAP_HT40_SGI               0x0800
1835
1836 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
1837                                 WMI_HT_CAP_HT20_SGI      | \
1838                                 WMI_HT_CAP_HT40_SGI      | \
1839                                 WMI_HT_CAP_TX_STBC       | \
1840                                 WMI_HT_CAP_RX_STBC       | \
1841                                 WMI_HT_CAP_LDPC)
1842
1843 /*
1844  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
1845  * field. The fields not defined here are not supported, or reserved.
1846  * Do not change these masks and if you have to add new one follow the
1847  * bitmask as specified by 802.11ac draft.
1848  */
1849
1850 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
1851 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
1852 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
1853 #define WMI_VHT_CAP_TX_STBC                      0x00000080
1854 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
1855 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
1856 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
1857 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
1858 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
1859 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
1860
1861 /* The following also refer for max HT AMSDU */
1862 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
1863 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
1864 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
1865
1866 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
1867                                  WMI_VHT_CAP_RX_LDPC             | \
1868                                  WMI_VHT_CAP_SGI_80MHZ           | \
1869                                  WMI_VHT_CAP_TX_STBC             | \
1870                                  WMI_VHT_CAP_RX_STBC_MASK        | \
1871                                  WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
1872                                  WMI_VHT_CAP_RX_FIXED_ANT        | \
1873                                  WMI_VHT_CAP_TX_FIXED_ANT)
1874
1875 /*
1876  * Interested readers refer to Rx/Tx MCS Map definition as defined in
1877  * 802.11ac
1878  */
1879 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
1880 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
1881 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
1882
1883 enum {
1884         REGDMN_MODE_11A              = 0x00001, /* 11a channels */
1885         REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
1886         REGDMN_MODE_11B              = 0x00004, /* 11b channels */
1887         REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
1888         REGDMN_MODE_11G              = 0x00008, /* XXX historical */
1889         REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
1890         REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
1891         REGDMN_MODE_XR               = 0x00100, /* XR channels */
1892         REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
1893         REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
1894         REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
1895         REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
1896         REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
1897         REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
1898         REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
1899         REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
1900         REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
1901         REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
1902         REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
1903         REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
1904         REGDMN_MODE_ALL              = 0xffffffff
1905 };
1906
1907 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
1908 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
1909 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
1910
1911 /* regulatory capabilities */
1912 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
1913 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
1914 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
1915 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
1916 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
1917 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
1918
1919 struct hal_reg_capabilities {
1920         /* regdomain value specified in EEPROM */
1921         __le32 eeprom_rd;
1922         /*regdomain */
1923         __le32 eeprom_rd_ext;
1924         /* CAP1 capabilities bit map. */
1925         __le32 regcap1;
1926         /* REGDMN EEPROM CAP. */
1927         __le32 regcap2;
1928         /* REGDMN MODE */
1929         __le32 wireless_modes;
1930         __le32 low_2ghz_chan;
1931         __le32 high_2ghz_chan;
1932         __le32 low_5ghz_chan;
1933         __le32 high_5ghz_chan;
1934 } __packed;
1935
1936 enum wlan_mode_capability {
1937         WHAL_WLAN_11A_CAPABILITY   = 0x1,
1938         WHAL_WLAN_11G_CAPABILITY   = 0x2,
1939         WHAL_WLAN_11AG_CAPABILITY  = 0x3,
1940 };
1941
1942 /* structure used by FW for requesting host memory */
1943 struct wlan_host_mem_req {
1944         /* ID of the request */
1945         __le32 req_id;
1946         /* size of the  of each unit */
1947         __le32 unit_size;
1948         /* flags to  indicate that
1949          * the number units is dependent
1950          * on number of resources(num vdevs num peers .. etc)
1951          */
1952         __le32 num_unit_info;
1953         /*
1954          * actual number of units to allocate . if flags in the num_unit_info
1955          * indicate that number of units is tied to number of a particular
1956          * resource to allocate then  num_units filed is set to 0 and host
1957          * will derive the number units from number of the resources it is
1958          * requesting.
1959          */
1960         __le32 num_units;
1961 } __packed;
1962
1963 /*
1964  * The following struct holds optional payload for
1965  * wmi_service_ready_event,e.g., 11ac pass some of the
1966  * device capability to the host.
1967  */
1968 struct wmi_service_ready_event {
1969         __le32 sw_version;
1970         __le32 sw_version_1;
1971         __le32 abi_version;
1972         /* WMI_PHY_CAPABILITY */
1973         __le32 phy_capability;
1974         /* Maximum number of frag table entries that SW will populate less 1 */
1975         __le32 max_frag_entry;
1976         __le32 wmi_service_bitmap[16];
1977         __le32 num_rf_chains;
1978         /*
1979          * The following field is only valid for service type
1980          * WMI_SERVICE_11AC
1981          */
1982         __le32 ht_cap_info; /* WMI HT Capability */
1983         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
1984         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
1985         __le32 hw_min_tx_power;
1986         __le32 hw_max_tx_power;
1987         struct hal_reg_capabilities hal_reg_capabilities;
1988         __le32 sys_cap_info;
1989         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
1990         /*
1991          * Max beacon and Probe Response IE offload size
1992          * (includes optional P2P IEs)
1993          */
1994         __le32 max_bcn_ie_size;
1995         /*
1996          * request to host to allocate a chuck of memory and pss it down to FW
1997          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
1998          * data structures. Only valid for low latency interfaces like PCIE
1999          * where FW can access this memory directly (or) by DMA.
2000          */
2001         __le32 num_mem_reqs;
2002         struct wlan_host_mem_req mem_reqs[0];
2003 } __packed;
2004
2005 /* This is the definition from 10.X firmware branch */
2006 struct wmi_10x_service_ready_event {
2007         __le32 sw_version;
2008         __le32 abi_version;
2009
2010         /* WMI_PHY_CAPABILITY */
2011         __le32 phy_capability;
2012
2013         /* Maximum number of frag table entries that SW will populate less 1 */
2014         __le32 max_frag_entry;
2015         __le32 wmi_service_bitmap[16];
2016         __le32 num_rf_chains;
2017
2018         /*
2019          * The following field is only valid for service type
2020          * WMI_SERVICE_11AC
2021          */
2022         __le32 ht_cap_info; /* WMI HT Capability */
2023         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2024         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2025         __le32 hw_min_tx_power;
2026         __le32 hw_max_tx_power;
2027
2028         struct hal_reg_capabilities hal_reg_capabilities;
2029
2030         __le32 sys_cap_info;
2031         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2032
2033         /*
2034          * request to host to allocate a chuck of memory and pss it down to FW
2035          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2036          * data structures. Only valid for low latency interfaces like PCIE
2037          * where FW can access this memory directly (or) by DMA.
2038          */
2039         __le32 num_mem_reqs;
2040
2041         struct wlan_host_mem_req mem_reqs[0];
2042 } __packed;
2043
2044 #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ)
2045 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ)
2046
2047 struct wmi_ready_event {
2048         __le32 sw_version;
2049         __le32 abi_version;
2050         struct wmi_mac_addr mac_addr;
2051         __le32 status;
2052 } __packed;
2053
2054 struct wmi_resource_config {
2055         /* number of virtual devices (VAPs) to support */
2056         __le32 num_vdevs;
2057
2058         /* number of peer nodes to support */
2059         __le32 num_peers;
2060
2061         /*
2062          * In offload mode target supports features like WOW, chatter and
2063          * other protocol offloads. In order to support them some
2064          * functionalities like reorder buffering, PN checking need to be
2065          * done in target. This determines maximum number of peers suported
2066          * by target in offload mode
2067          */
2068         __le32 num_offload_peers;
2069
2070         /* For target-based RX reordering */
2071         __le32 num_offload_reorder_bufs;
2072
2073         /* number of keys per peer */
2074         __le32 num_peer_keys;
2075
2076         /* total number of TX/RX data TIDs */
2077         __le32 num_tids;
2078
2079         /*
2080          * max skid for resolving hash collisions
2081          *
2082          *   The address search table is sparse, so that if two MAC addresses
2083          *   result in the same hash value, the second of these conflicting
2084          *   entries can slide to the next index in the address search table,
2085          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2086          *   specifies the upper bound on how many subsequent indices to search
2087          *   over to find an unoccupied space.
2088          */
2089         __le32 ast_skid_limit;
2090
2091         /*
2092          * the nominal chain mask for transmit
2093          *
2094          *   The chain mask may be modified dynamically, e.g. to operate AP
2095          *   tx with a reduced number of chains if no clients are associated.
2096          *   This configuration parameter specifies the nominal chain-mask that
2097          *   should be used when not operating with a reduced set of tx chains.
2098          */
2099         __le32 tx_chain_mask;
2100
2101         /*
2102          * the nominal chain mask for receive
2103          *
2104          *   The chain mask may be modified dynamically, e.g. for a client
2105          *   to use a reduced number of chains for receive if the traffic to
2106          *   the client is low enough that it doesn't require downlink MIMO
2107          *   or antenna diversity.
2108          *   This configuration parameter specifies the nominal chain-mask that
2109          *   should be used when not operating with a reduced set of rx chains.
2110          */
2111         __le32 rx_chain_mask;
2112
2113         /*
2114          * what rx reorder timeout (ms) to use for the AC
2115          *
2116          *   Each WMM access class (voice, video, best-effort, background) will
2117          *   have its own timeout value to dictate how long to wait for missing
2118          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2119          *   already been received.
2120          *   This parameter specifies the timeout in milliseconds for each
2121          *   class.
2122          */
2123         __le32 rx_timeout_pri_vi;
2124         __le32 rx_timeout_pri_vo;
2125         __le32 rx_timeout_pri_be;
2126         __le32 rx_timeout_pri_bk;
2127
2128         /*
2129          * what mode the rx should decap packets to
2130          *
2131          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2132          *   THis setting also determines the default TX behavior, however TX
2133          *   behavior can be modified on a per VAP basis during VAP init
2134          */
2135         __le32 rx_decap_mode;
2136
2137         /* what is the maximum number of scan requests that can be queued */
2138         __le32 scan_max_pending_reqs;
2139
2140         /* maximum VDEV that could use BMISS offload */
2141         __le32 bmiss_offload_max_vdev;
2142
2143         /* maximum VDEV that could use offload roaming */
2144         __le32 roam_offload_max_vdev;
2145
2146         /* maximum AP profiles that would push to offload roaming */
2147         __le32 roam_offload_max_ap_profiles;
2148
2149         /*
2150          * how many groups to use for mcast->ucast conversion
2151          *
2152          *   The target's WAL maintains a table to hold information regarding
2153          *   which peers belong to a given multicast group, so that if
2154          *   multicast->unicast conversion is enabled, the target can convert
2155          *   multicast tx frames to a series of unicast tx frames, to each
2156          *   peer within the multicast group.
2157              This num_mcast_groups configuration parameter tells the target how
2158          *   many multicast groups to provide storage for within its multicast
2159          *   group membership table.
2160          */
2161         __le32 num_mcast_groups;
2162
2163         /*
2164          * size to alloc for the mcast membership table
2165          *
2166          *   This num_mcast_table_elems configuration parameter tells the
2167          *   target how many peer elements it needs to provide storage for in
2168          *   its multicast group membership table.
2169          *   These multicast group membership table elements are shared by the
2170          *   multicast groups stored within the table.
2171          */
2172         __le32 num_mcast_table_elems;
2173
2174         /*
2175          * whether/how to do multicast->unicast conversion
2176          *
2177          *   This configuration parameter specifies whether the target should
2178          *   perform multicast --> unicast conversion on transmit, and if so,
2179          *   what to do if it finds no entries in its multicast group
2180          *   membership table for the multicast IP address in the tx frame.
2181          *   Configuration value:
2182          *   0 -> Do not perform multicast to unicast conversion.
2183          *   1 -> Convert multicast frames to unicast, if the IP multicast
2184          *        address from the tx frame is found in the multicast group
2185          *        membership table.  If the IP multicast address is not found,
2186          *        drop the frame.
2187          *   2 -> Convert multicast frames to unicast, if the IP multicast
2188          *        address from the tx frame is found in the multicast group
2189          *        membership table.  If the IP multicast address is not found,
2190          *        transmit the frame as multicast.
2191          */
2192         __le32 mcast2ucast_mode;
2193
2194         /*
2195          * how much memory to allocate for a tx PPDU dbg log
2196          *
2197          *   This parameter controls how much memory the target will allocate
2198          *   to store a log of tx PPDU meta-information (how large the PPDU
2199          *   was, when it was sent, whether it was successful, etc.)
2200          */
2201         __le32 tx_dbg_log_size;
2202
2203         /* how many AST entries to be allocated for WDS */
2204         __le32 num_wds_entries;
2205
2206         /*
2207          * MAC DMA burst size, e.g., For target PCI limit can be
2208          * 0 -default, 1 256B
2209          */
2210         __le32 dma_burst_size;
2211
2212         /*
2213          * Fixed delimiters to be inserted after every MPDU to
2214          * account for interface latency to avoid underrun.
2215          */
2216         __le32 mac_aggr_delim;
2217
2218         /*
2219          *   determine whether target is responsible for detecting duplicate
2220          *   non-aggregate MPDU and timing out stale fragments.
2221          *
2222          *   A-MPDU reordering is always performed on the target.
2223          *
2224          *   0: target responsible for frag timeout and dup checking
2225          *   1: host responsible for frag timeout and dup checking
2226          */
2227         __le32 rx_skip_defrag_timeout_dup_detection_check;
2228
2229         /*
2230          * Configuration for VoW :
2231          * No of Video Nodes to be supported
2232          * and Max no of descriptors for each Video link (node).
2233          */
2234         __le32 vow_config;
2235
2236         /* maximum VDEV that could use GTK offload */
2237         __le32 gtk_offload_max_vdev;
2238
2239         /* Number of msdu descriptors target should use */
2240         __le32 num_msdu_desc;
2241
2242         /*
2243          * Max. number of Tx fragments per MSDU
2244          *  This parameter controls the max number of Tx fragments per MSDU.
2245          *  This is sent by the target as part of the WMI_SERVICE_READY event
2246          *  and is overriden by the OS shim as required.
2247          */
2248         __le32 max_frag_entries;
2249 } __packed;
2250
2251 struct wmi_resource_config_10x {
2252         /* number of virtual devices (VAPs) to support */
2253         __le32 num_vdevs;
2254
2255         /* number of peer nodes to support */
2256         __le32 num_peers;
2257
2258         /* number of keys per peer */
2259         __le32 num_peer_keys;
2260
2261         /* total number of TX/RX data TIDs */
2262         __le32 num_tids;
2263
2264         /*
2265          * max skid for resolving hash collisions
2266          *
2267          *   The address search table is sparse, so that if two MAC addresses
2268          *   result in the same hash value, the second of these conflicting
2269          *   entries can slide to the next index in the address search table,
2270          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2271          *   specifies the upper bound on how many subsequent indices to search
2272          *   over to find an unoccupied space.
2273          */
2274         __le32 ast_skid_limit;
2275
2276         /*
2277          * the nominal chain mask for transmit
2278          *
2279          *   The chain mask may be modified dynamically, e.g. to operate AP
2280          *   tx with a reduced number of chains if no clients are associated.
2281          *   This configuration parameter specifies the nominal chain-mask that
2282          *   should be used when not operating with a reduced set of tx chains.
2283          */
2284         __le32 tx_chain_mask;
2285
2286         /*
2287          * the nominal chain mask for receive
2288          *
2289          *   The chain mask may be modified dynamically, e.g. for a client
2290          *   to use a reduced number of chains for receive if the traffic to
2291          *   the client is low enough that it doesn't require downlink MIMO
2292          *   or antenna diversity.
2293          *   This configuration parameter specifies the nominal chain-mask that
2294          *   should be used when not operating with a reduced set of rx chains.
2295          */
2296         __le32 rx_chain_mask;
2297
2298         /*
2299          * what rx reorder timeout (ms) to use for the AC
2300          *
2301          *   Each WMM access class (voice, video, best-effort, background) will
2302          *   have its own timeout value to dictate how long to wait for missing
2303          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2304          *   already been received.
2305          *   This parameter specifies the timeout in milliseconds for each
2306          *   class.
2307          */
2308         __le32 rx_timeout_pri_vi;
2309         __le32 rx_timeout_pri_vo;
2310         __le32 rx_timeout_pri_be;
2311         __le32 rx_timeout_pri_bk;
2312
2313         /*
2314          * what mode the rx should decap packets to
2315          *
2316          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2317          *   THis setting also determines the default TX behavior, however TX
2318          *   behavior can be modified on a per VAP basis during VAP init
2319          */
2320         __le32 rx_decap_mode;
2321
2322         /* what is the maximum number of scan requests that can be queued */
2323         __le32 scan_max_pending_reqs;
2324
2325         /* maximum VDEV that could use BMISS offload */
2326         __le32 bmiss_offload_max_vdev;
2327
2328         /* maximum VDEV that could use offload roaming */
2329         __le32 roam_offload_max_vdev;
2330
2331         /* maximum AP profiles that would push to offload roaming */
2332         __le32 roam_offload_max_ap_profiles;
2333
2334         /*
2335          * how many groups to use for mcast->ucast conversion
2336          *
2337          *   The target's WAL maintains a table to hold information regarding
2338          *   which peers belong to a given multicast group, so that if
2339          *   multicast->unicast conversion is enabled, the target can convert
2340          *   multicast tx frames to a series of unicast tx frames, to each
2341          *   peer within the multicast group.
2342              This num_mcast_groups configuration parameter tells the target how
2343          *   many multicast groups to provide storage for within its multicast
2344          *   group membership table.
2345          */
2346         __le32 num_mcast_groups;
2347
2348         /*
2349          * size to alloc for the mcast membership table
2350          *
2351          *   This num_mcast_table_elems configuration parameter tells the
2352          *   target how many peer elements it needs to provide storage for in
2353          *   its multicast group membership table.
2354          *   These multicast group membership table elements are shared by the
2355          *   multicast groups stored within the table.
2356          */
2357         __le32 num_mcast_table_elems;
2358
2359         /*
2360          * whether/how to do multicast->unicast conversion
2361          *
2362          *   This configuration parameter specifies whether the target should
2363          *   perform multicast --> unicast conversion on transmit, and if so,
2364          *   what to do if it finds no entries in its multicast group
2365          *   membership table for the multicast IP address in the tx frame.
2366          *   Configuration value:
2367          *   0 -> Do not perform multicast to unicast conversion.
2368          *   1 -> Convert multicast frames to unicast, if the IP multicast
2369          *        address from the tx frame is found in the multicast group
2370          *        membership table.  If the IP multicast address is not found,
2371          *        drop the frame.
2372          *   2 -> Convert multicast frames to unicast, if the IP multicast
2373          *        address from the tx frame is found in the multicast group
2374          *        membership table.  If the IP multicast address is not found,
2375          *        transmit the frame as multicast.
2376          */
2377         __le32 mcast2ucast_mode;
2378
2379         /*
2380          * how much memory to allocate for a tx PPDU dbg log
2381          *
2382          *   This parameter controls how much memory the target will allocate
2383          *   to store a log of tx PPDU meta-information (how large the PPDU
2384          *   was, when it was sent, whether it was successful, etc.)
2385          */
2386         __le32 tx_dbg_log_size;
2387
2388         /* how many AST entries to be allocated for WDS */
2389         __le32 num_wds_entries;
2390
2391         /*
2392          * MAC DMA burst size, e.g., For target PCI limit can be
2393          * 0 -default, 1 256B
2394          */
2395         __le32 dma_burst_size;
2396
2397         /*
2398          * Fixed delimiters to be inserted after every MPDU to
2399          * account for interface latency to avoid underrun.
2400          */
2401         __le32 mac_aggr_delim;
2402
2403         /*
2404          *   determine whether target is responsible for detecting duplicate
2405          *   non-aggregate MPDU and timing out stale fragments.
2406          *
2407          *   A-MPDU reordering is always performed on the target.
2408          *
2409          *   0: target responsible for frag timeout and dup checking
2410          *   1: host responsible for frag timeout and dup checking
2411          */
2412         __le32 rx_skip_defrag_timeout_dup_detection_check;
2413
2414         /*
2415          * Configuration for VoW :
2416          * No of Video Nodes to be supported
2417          * and Max no of descriptors for each Video link (node).
2418          */
2419         __le32 vow_config;
2420
2421         /* Number of msdu descriptors target should use */
2422         __le32 num_msdu_desc;
2423
2424         /*
2425          * Max. number of Tx fragments per MSDU
2426          *  This parameter controls the max number of Tx fragments per MSDU.
2427          *  This is sent by the target as part of the WMI_SERVICE_READY event
2428          *  and is overriden by the OS shim as required.
2429          */
2430         __le32 max_frag_entries;
2431 } __packed;
2432
2433 enum wmi_10_2_feature_mask {
2434         WMI_10_2_RX_BATCH_MODE = BIT(0),
2435         WMI_10_2_ATF_CONFIG    = BIT(1),
2436         WMI_10_2_COEX_GPIO     = BIT(3),
2437         WMI_10_2_PEER_STATS    = BIT(7),
2438 };
2439
2440 struct wmi_resource_config_10_2 {
2441         struct wmi_resource_config_10x common;
2442         __le32 max_peer_ext_stats;
2443         __le32 smart_ant_cap; /* 0-disable, 1-enable */
2444         __le32 bk_min_free;
2445         __le32 be_min_free;
2446         __le32 vi_min_free;
2447         __le32 vo_min_free;
2448         __le32 feature_mask;
2449 } __packed;
2450
2451 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2452 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2453 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2454
2455 struct wmi_resource_config_10_4 {
2456         /* Number of virtual devices (VAPs) to support */
2457         __le32 num_vdevs;
2458
2459         /* Number of peer nodes to support */
2460         __le32 num_peers;
2461
2462         /* Number of active peer nodes to support */
2463         __le32 num_active_peers;
2464
2465         /* In offload mode, target supports features like WOW, chatter and other
2466          * protocol offloads. In order to support them some functionalities like
2467          * reorder buffering, PN checking need to be done in target.
2468          * This determines maximum number of peers supported by target in
2469          * offload mode.
2470          */
2471         __le32 num_offload_peers;
2472
2473         /* Number of reorder buffers available for doing target based reorder
2474          * Rx reorder buffering
2475          */
2476         __le32 num_offload_reorder_buffs;
2477
2478         /* Number of keys per peer */
2479         __le32 num_peer_keys;
2480
2481         /* Total number of TX/RX data TIDs */
2482         __le32 num_tids;
2483
2484         /* Max skid for resolving hash collisions.
2485          * The address search table is sparse, so that if two MAC addresses
2486          * result in the same hash value, the second of these conflicting
2487          * entries can slide to the next index in the address search table,
2488          * and use it, if it is unoccupied.  This ast_skid_limit parameter
2489          * specifies the upper bound on how many subsequent indices to search
2490          * over to find an unoccupied space.
2491          */
2492         __le32 ast_skid_limit;
2493
2494         /* The nominal chain mask for transmit.
2495          * The chain mask may be modified dynamically, e.g. to operate AP tx
2496          * with a reduced number of chains if no clients are associated.
2497          * This configuration parameter specifies the nominal chain-mask that
2498          * should be used when not operating with a reduced set of tx chains.
2499          */
2500         __le32 tx_chain_mask;
2501
2502         /* The nominal chain mask for receive.
2503          * The chain mask may be modified dynamically, e.g. for a client to use
2504          * a reduced number of chains for receive if the traffic to the client
2505          * is low enough that it doesn't require downlink MIMO or antenna
2506          * diversity. This configuration parameter specifies the nominal
2507          * chain-mask that should be used when not operating with a reduced
2508          * set of rx chains.
2509          */
2510         __le32 rx_chain_mask;
2511
2512         /* What rx reorder timeout (ms) to use for the AC.
2513          * Each WMM access class (voice, video, best-effort, background) will
2514          * have its own timeout value to dictate how long to wait for missing
2515          * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2516          * been received. This parameter specifies the timeout in milliseconds
2517          * for each class.
2518          */
2519         __le32 rx_timeout_pri[4];
2520
2521         /* What mode the rx should decap packets to.
2522          * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2523          * This setting also determines the default TX behavior, however TX
2524          * behavior can be modified on a per VAP basis during VAP init
2525          */
2526         __le32 rx_decap_mode;
2527
2528         __le32 scan_max_pending_req;
2529
2530         __le32 bmiss_offload_max_vdev;
2531
2532         __le32 roam_offload_max_vdev;
2533
2534         __le32 roam_offload_max_ap_profiles;
2535
2536         /* How many groups to use for mcast->ucast conversion.
2537          * The target's WAL maintains a table to hold information regarding
2538          * which peers belong to a given multicast group, so that if
2539          * multicast->unicast conversion is enabled, the target can convert
2540          * multicast tx frames to a series of unicast tx frames, to each peer
2541          * within the multicast group. This num_mcast_groups configuration
2542          * parameter tells the target how many multicast groups to provide
2543          * storage for within its multicast group membership table.
2544          */
2545         __le32 num_mcast_groups;
2546
2547         /* Size to alloc for the mcast membership table.
2548          * This num_mcast_table_elems configuration parameter tells the target
2549          * how many peer elements it needs to provide storage for in its
2550          * multicast group membership table. These multicast group membership
2551          * table elements are shared by the multicast groups stored within
2552          * the table.
2553          */
2554         __le32 num_mcast_table_elems;
2555
2556         /* Whether/how to do multicast->unicast conversion.
2557          * This configuration parameter specifies whether the target should
2558          * perform multicast --> unicast conversion on transmit, and if so,
2559          * what to do if it finds no entries in its multicast group membership
2560          * table for the multicast IP address in the tx frame.
2561          * Configuration value:
2562          * 0 -> Do not perform multicast to unicast conversion.
2563          * 1 -> Convert multicast frames to unicast, if the IP multicast address
2564          *      from the tx frame is found in the multicast group membership
2565          *      table.  If the IP multicast address is not found, drop the frame
2566          * 2 -> Convert multicast frames to unicast, if the IP multicast address
2567          *      from the tx frame is found in the multicast group membership
2568          *      table.  If the IP multicast address is not found, transmit the
2569          *      frame as multicast.
2570          */
2571         __le32 mcast2ucast_mode;
2572
2573         /* How much memory to allocate for a tx PPDU dbg log.
2574          * This parameter controls how much memory the target will allocate to
2575          * store a log of tx PPDU meta-information (how large the PPDU was,
2576          * when it was sent, whether it was successful, etc.)
2577          */
2578         __le32 tx_dbg_log_size;
2579
2580         /* How many AST entries to be allocated for WDS */
2581         __le32 num_wds_entries;
2582
2583         /* MAC DMA burst size. 0 -default, 1 -256B */
2584         __le32 dma_burst_size;
2585
2586         /* Fixed delimiters to be inserted after every MPDU to account for
2587          * interface latency to avoid underrun.
2588          */
2589         __le32 mac_aggr_delim;
2590
2591         /* Determine whether target is responsible for detecting duplicate
2592          * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2593          * is always performed on the target.
2594          *
2595          * 0: target responsible for frag timeout and dup checking
2596          * 1: host responsible for frag timeout and dup checking
2597          */
2598         __le32 rx_skip_defrag_timeout_dup_detection_check;
2599
2600         /* Configuration for VoW : No of Video nodes to be supported and max
2601          * no of descriptors for each video link (node).
2602          */
2603         __le32 vow_config;
2604
2605         /* Maximum vdev that could use gtk offload */
2606         __le32 gtk_offload_max_vdev;
2607
2608         /* Number of msdu descriptors target should use */
2609         __le32 num_msdu_desc;
2610
2611         /* Max number of tx fragments per MSDU.
2612          * This parameter controls the max number of tx fragments per MSDU.
2613          * This will passed by target as part of the WMI_SERVICE_READY event
2614          * and is overridden by the OS shim as required.
2615          */
2616         __le32 max_frag_entries;
2617
2618         /* Max number of extended peer stats.
2619          * This parameter controls the max number of peers for which extended
2620          * statistics are supported by target
2621          */
2622         __le32 max_peer_ext_stats;
2623
2624         /* Smart antenna capabilities information.
2625          * 1 - Smart antenna is enabled
2626          * 0 - Smart antenna is disabled
2627          * In future this can contain smart antenna specific capabilities.
2628          */
2629         __le32 smart_ant_cap;
2630
2631         /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2632          * during init.
2633          */
2634         __le32 bk_minfree;
2635         __le32 be_minfree;
2636         __le32 vi_minfree;
2637         __le32 vo_minfree;
2638
2639         /* Rx batch mode capability.
2640          * 1 - Rx batch mode enabled
2641          * 0 - Rx batch mode disabled
2642          */
2643         __le32 rx_batchmode;
2644
2645         /* Thermal throttling capability.
2646          * 1 - Capable of thermal throttling
2647          * 0 - Not capable of thermal throttling
2648          */
2649         __le32 tt_support;
2650
2651         /* ATF configuration.
2652          * 1  - Enable ATF
2653          * 0  - Disable ATF
2654          */
2655         __le32 atf_config;
2656
2657         /* Configure padding to manage IP header un-alignment
2658          * 1  - Enable padding
2659          * 0  - Disable padding
2660          */
2661         __le32 iphdr_pad_config;
2662
2663         /* qwrap configuration
2664          * 1  - This is qwrap configuration
2665          * 0  - This is not qwrap
2666          */
2667         __le32 qwrap_config;
2668 } __packed;
2669
2670 /* strucutre describing host memory chunk. */
2671 struct host_memory_chunk {
2672         /* id of the request that is passed up in service ready */
2673         __le32 req_id;
2674         /* the physical address the memory chunk */
2675         __le32 ptr;
2676         /* size of the chunk */
2677         __le32 size;
2678 } __packed;
2679
2680 struct wmi_host_mem_chunks {
2681         __le32 count;
2682         /* some fw revisions require at least 1 chunk regardless of count */
2683         struct host_memory_chunk items[1];
2684 } __packed;
2685
2686 struct wmi_init_cmd {
2687         struct wmi_resource_config resource_config;
2688         struct wmi_host_mem_chunks mem_chunks;
2689 } __packed;
2690
2691 /* _10x stucture is from 10.X FW API */
2692 struct wmi_init_cmd_10x {
2693         struct wmi_resource_config_10x resource_config;
2694         struct wmi_host_mem_chunks mem_chunks;
2695 } __packed;
2696
2697 struct wmi_init_cmd_10_2 {
2698         struct wmi_resource_config_10_2 resource_config;
2699         struct wmi_host_mem_chunks mem_chunks;
2700 } __packed;
2701
2702 struct wmi_init_cmd_10_4 {
2703         struct wmi_resource_config_10_4 resource_config;
2704         struct wmi_host_mem_chunks mem_chunks;
2705 } __packed;
2706
2707 struct wmi_chan_list_entry {
2708         __le16 freq;
2709         u8 phy_mode; /* valid for 10.2 only */
2710         u8 reserved;
2711 } __packed;
2712
2713 /* TLV for channel list */
2714 struct wmi_chan_list {
2715         __le32 tag; /* WMI_CHAN_LIST_TAG */
2716         __le32 num_chan;
2717         struct wmi_chan_list_entry channel_list[0];
2718 } __packed;
2719
2720 struct wmi_bssid_list {
2721         __le32 tag; /* WMI_BSSID_LIST_TAG */
2722         __le32 num_bssid;
2723         struct wmi_mac_addr bssid_list[0];
2724 } __packed;
2725
2726 struct wmi_ie_data {
2727         __le32 tag; /* WMI_IE_TAG */
2728         __le32 ie_len;
2729         u8 ie_data[0];
2730 } __packed;
2731
2732 struct wmi_ssid {
2733         __le32 ssid_len;
2734         u8 ssid[32];
2735 } __packed;
2736
2737 struct wmi_ssid_list {
2738         __le32 tag; /* WMI_SSID_LIST_TAG */
2739         __le32 num_ssids;
2740         struct wmi_ssid ssids[0];
2741 } __packed;
2742
2743 /* prefix used by scan requestor ids on the host */
2744 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
2745
2746 /* prefix used by scan request ids generated on the host */
2747 /* host cycles through the lower 12 bits to generate ids */
2748 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
2749
2750 #define WLAN_SCAN_PARAMS_MAX_SSID    16
2751 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
2752 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
2753
2754 /* Values lower than this may be refused by some firmware revisions with a scan
2755  * completion with a timedout reason.
2756  */
2757 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
2758
2759 /* Scan priority numbers must be sequential, starting with 0 */
2760 enum wmi_scan_priority {
2761         WMI_SCAN_PRIORITY_VERY_LOW = 0,
2762         WMI_SCAN_PRIORITY_LOW,
2763         WMI_SCAN_PRIORITY_MEDIUM,
2764         WMI_SCAN_PRIORITY_HIGH,
2765         WMI_SCAN_PRIORITY_VERY_HIGH,
2766         WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
2767 };
2768
2769 struct wmi_start_scan_common {
2770         /* Scan ID */
2771         __le32 scan_id;
2772         /* Scan requestor ID */
2773         __le32 scan_req_id;
2774         /* VDEV id(interface) that is requesting scan */
2775         __le32 vdev_id;
2776         /* Scan Priority, input to scan scheduler */
2777         __le32 scan_priority;
2778         /* Scan events subscription */
2779         __le32 notify_scan_events;
2780         /* dwell time in msec on active channels */
2781         __le32 dwell_time_active;
2782         /* dwell time in msec on passive channels */
2783         __le32 dwell_time_passive;
2784         /*
2785          * min time in msec on the BSS channel,only valid if atleast one
2786          * VDEV is active
2787          */
2788         __le32 min_rest_time;
2789         /*
2790          * max rest time in msec on the BSS channel,only valid if at least
2791          * one VDEV is active
2792          */
2793         /*
2794          * the scanner will rest on the bss channel at least min_rest_time
2795          * after min_rest_time the scanner will start checking for tx/rx
2796          * activity on all VDEVs. if there is no activity the scanner will
2797          * switch to off channel. if there is activity the scanner will let
2798          * the radio on the bss channel until max_rest_time expires.at
2799          * max_rest_time scanner will switch to off channel irrespective of
2800          * activity. activity is determined by the idle_time parameter.
2801          */
2802         __le32 max_rest_time;
2803         /*
2804          * time before sending next set of probe requests.
2805          * The scanner keeps repeating probe requests transmission with
2806          * period specified by repeat_probe_time.
2807          * The number of probe requests specified depends on the ssid_list
2808          * and bssid_list
2809          */
2810         __le32 repeat_probe_time;
2811         /* time in msec between 2 consequetive probe requests with in a set. */
2812         __le32 probe_spacing_time;
2813         /*
2814          * data inactivity time in msec on bss channel that will be used by
2815          * scanner for measuring the inactivity.
2816          */
2817         __le32 idle_time;
2818         /* maximum time in msec allowed for scan  */
2819         __le32 max_scan_time;
2820         /*
2821          * delay in msec before sending first probe request after switching
2822          * to a channel
2823          */
2824         __le32 probe_delay;
2825         /* Scan control flags */
2826         __le32 scan_ctrl_flags;
2827 } __packed;
2828
2829 struct wmi_start_scan_tlvs {
2830         /* TLV parameters. These includes channel list, ssid list, bssid list,
2831          * extra ies.
2832          */
2833         u8 tlvs[0];
2834 } __packed;
2835
2836 struct wmi_start_scan_cmd {
2837         struct wmi_start_scan_common common;
2838         __le32 burst_duration_ms;
2839         struct wmi_start_scan_tlvs tlvs;
2840 } __packed;
2841
2842 /* This is the definition from 10.X firmware branch */
2843 struct wmi_10x_start_scan_cmd {
2844         struct wmi_start_scan_common common;
2845         struct wmi_start_scan_tlvs tlvs;
2846 } __packed;
2847
2848 struct wmi_ssid_arg {
2849         int len;
2850         const u8 *ssid;
2851 };
2852
2853 struct wmi_bssid_arg {
2854         const u8 *bssid;
2855 };
2856
2857 struct wmi_start_scan_arg {
2858         u32 scan_id;
2859         u32 scan_req_id;
2860         u32 vdev_id;
2861         u32 scan_priority;
2862         u32 notify_scan_events;
2863         u32 dwell_time_active;
2864         u32 dwell_time_passive;
2865         u32 min_rest_time;
2866         u32 max_rest_time;
2867         u32 repeat_probe_time;
2868         u32 probe_spacing_time;
2869         u32 idle_time;
2870         u32 max_scan_time;
2871         u32 probe_delay;
2872         u32 scan_ctrl_flags;
2873         u32 burst_duration_ms;
2874
2875         u32 ie_len;
2876         u32 n_channels;
2877         u32 n_ssids;
2878         u32 n_bssids;
2879
2880         u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
2881         u16 channels[64];
2882         struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
2883         struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
2884 };
2885
2886 /* scan control flags */
2887
2888 /* passively scan all channels including active channels */
2889 #define WMI_SCAN_FLAG_PASSIVE        0x1
2890 /* add wild card ssid probe request even though ssid_list is specified. */
2891 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
2892 /* add cck rates to rates/xrate ie for the generated probe request */
2893 #define WMI_SCAN_ADD_CCK_RATES 0x4
2894 /* add ofdm rates to rates/xrate ie for the generated probe request */
2895 #define WMI_SCAN_ADD_OFDM_RATES 0x8
2896 /* To enable indication of Chan load and Noise floor to host */
2897 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
2898 /* Filter Probe request frames  */
2899 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
2900 /* When set, DFS channels will not be scanned */
2901 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
2902 /* Different FW scan engine may choose to bail out on errors.
2903  * Allow the driver to have influence over that. */
2904 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
2905
2906 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
2907 #define WMI_SCAN_CLASS_MASK 0xFF000000
2908
2909 enum wmi_stop_scan_type {
2910         WMI_SCAN_STOP_ONE       = 0x00000000, /* stop by scan_id */
2911         WMI_SCAN_STOP_VDEV_ALL  = 0x01000000, /* stop by vdev_id */
2912         WMI_SCAN_STOP_ALL       = 0x04000000, /* stop all scans */
2913 };
2914
2915 struct wmi_stop_scan_cmd {
2916         __le32 scan_req_id;
2917         __le32 scan_id;
2918         __le32 req_type;
2919         __le32 vdev_id;
2920 } __packed;
2921
2922 struct wmi_stop_scan_arg {
2923         u32 req_id;
2924         enum wmi_stop_scan_type req_type;
2925         union {
2926                 u32 scan_id;
2927                 u32 vdev_id;
2928         } u;
2929 };
2930
2931 struct wmi_scan_chan_list_cmd {
2932         __le32 num_scan_chans;
2933         struct wmi_channel chan_info[0];
2934 } __packed;
2935
2936 struct wmi_scan_chan_list_arg {
2937         u32 n_channels;
2938         struct wmi_channel_arg *channels;
2939 };
2940
2941 enum wmi_bss_filter {
2942         WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
2943         WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
2944         WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
2945         WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
2946         WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
2947         WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
2948         WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
2949         WMI_BSS_FILTER_LAST_BSS,        /* marker only */
2950 };
2951
2952 enum wmi_scan_event_type {
2953         WMI_SCAN_EVENT_STARTED              = BIT(0),
2954         WMI_SCAN_EVENT_COMPLETED            = BIT(1),
2955         WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
2956         WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
2957         WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
2958         /* possibly by high-prio scan */
2959         WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
2960         WMI_SCAN_EVENT_START_FAILED         = BIT(6),
2961         WMI_SCAN_EVENT_RESTARTED            = BIT(7),
2962         WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
2963         WMI_SCAN_EVENT_MAX                  = BIT(15),
2964 };
2965
2966 enum wmi_scan_completion_reason {
2967         WMI_SCAN_REASON_COMPLETED,
2968         WMI_SCAN_REASON_CANCELLED,
2969         WMI_SCAN_REASON_PREEMPTED,
2970         WMI_SCAN_REASON_TIMEDOUT,
2971         WMI_SCAN_REASON_INTERNAL_FAILURE,
2972         WMI_SCAN_REASON_MAX,
2973 };
2974
2975 struct wmi_scan_event {
2976         __le32 event_type; /* %WMI_SCAN_EVENT_ */
2977         __le32 reason; /* %WMI_SCAN_REASON_ */
2978         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
2979         __le32 scan_req_id;
2980         __le32 scan_id;
2981         __le32 vdev_id;
2982 } __packed;
2983
2984 /*
2985  * This defines how much headroom is kept in the
2986  * receive frame between the descriptor and the
2987  * payload, in order for the WMI PHY error and
2988  * management handler to insert header contents.
2989  *
2990  * This is in bytes.
2991  */
2992 #define WMI_MGMT_RX_HDR_HEADROOM    52
2993
2994 /*
2995  * This event will be used for sending scan results
2996  * as well as rx mgmt frames to the host. The rx buffer
2997  * will be sent as part of this WMI event. It would be a
2998  * good idea to pass all the fields in the RX status
2999  * descriptor up to the host.
3000  */
3001 struct wmi_mgmt_rx_hdr_v1 {
3002         __le32 channel;
3003         __le32 snr;
3004         __le32 rate;
3005         __le32 phy_mode;
3006         __le32 buf_len;
3007         __le32 status; /* %WMI_RX_STATUS_ */
3008 } __packed;
3009
3010 struct wmi_mgmt_rx_hdr_v2 {
3011         struct wmi_mgmt_rx_hdr_v1 v1;
3012         __le32 rssi_ctl[4];
3013 } __packed;
3014
3015 struct wmi_mgmt_rx_event_v1 {
3016         struct wmi_mgmt_rx_hdr_v1 hdr;
3017         u8 buf[0];
3018 } __packed;
3019
3020 struct wmi_mgmt_rx_event_v2 {
3021         struct wmi_mgmt_rx_hdr_v2 hdr;
3022         u8 buf[0];
3023 } __packed;
3024
3025 struct wmi_10_4_mgmt_rx_hdr {
3026         __le32 channel;
3027         __le32 snr;
3028             u8 rssi_ctl[4];
3029         __le32 rate;
3030         __le32 phy_mode;
3031         __le32 buf_len;
3032         __le32 status;
3033 } __packed;
3034
3035 struct wmi_10_4_mgmt_rx_event {
3036         struct wmi_10_4_mgmt_rx_hdr hdr;
3037         u8 buf[0];
3038 } __packed;
3039
3040 #define WMI_RX_STATUS_OK                        0x00
3041 #define WMI_RX_STATUS_ERR_CRC                   0x01
3042 #define WMI_RX_STATUS_ERR_DECRYPT               0x08
3043 #define WMI_RX_STATUS_ERR_MIC                   0x10
3044 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS        0x20
3045
3046 #define PHY_ERROR_GEN_SPECTRAL_SCAN             0x26
3047 #define PHY_ERROR_GEN_FALSE_RADAR_EXT           0x24
3048 #define PHY_ERROR_GEN_RADAR                     0x05
3049
3050 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3051 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3052
3053 enum phy_err_type {
3054         PHY_ERROR_UNKNOWN,
3055         PHY_ERROR_SPECTRAL_SCAN,
3056         PHY_ERROR_FALSE_RADAR_EXT,
3057         PHY_ERROR_RADAR
3058 };
3059
3060 struct wmi_phyerr {
3061         __le32 tsf_timestamp;
3062         __le16 freq1;
3063         __le16 freq2;
3064         u8 rssi_combined;
3065         u8 chan_width_mhz;
3066         u8 phy_err_code;
3067         u8 rsvd0;
3068         __le32 rssi_chains[4];
3069         __le16 nf_chains[4];
3070         __le32 buf_len;
3071         u8 buf[0];
3072 } __packed;
3073
3074 struct wmi_phyerr_event {
3075         __le32 num_phyerrs;
3076         __le32 tsf_l32;
3077         __le32 tsf_u32;
3078         struct wmi_phyerr phyerrs[0];
3079 } __packed;
3080
3081 struct wmi_10_4_phyerr_event {
3082         __le32 tsf_l32;
3083         __le32 tsf_u32;
3084         __le16 freq1;
3085         __le16 freq2;
3086         u8 rssi_combined;
3087         u8 chan_width_mhz;
3088         u8 phy_err_code;
3089         u8 rsvd0;
3090         __le32 rssi_chains[4];
3091         __le16 nf_chains[4];
3092         __le32 phy_err_mask[2];
3093         __le32 tsf_timestamp;
3094         __le32 buf_len;
3095         u8 buf[0];
3096 } __packed;
3097
3098 #define PHYERR_TLV_SIG                          0xBB
3099 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT        0xFB
3100 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY      0xF8
3101 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT  0xF9
3102
3103 struct phyerr_radar_report {
3104         __le32 reg0; /* RADAR_REPORT_REG0_* */
3105         __le32 reg1; /* REDAR_REPORT_REG1_* */
3106 } __packed;
3107
3108 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK           0x80000000
3109 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB            31
3110
3111 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK       0x40000000
3112 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB        30
3113
3114 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK           0x3FF00000
3115 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB            20
3116
3117 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK         0x000F0000
3118 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB          16
3119
3120 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK         0x0000FC00
3121 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB          10
3122
3123 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK               0x000003FF
3124 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB                0
3125
3126 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK     0x80000000
3127 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB      31
3128
3129 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK        0x7F000000
3130 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB         24
3131
3132 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK       0x00FF0000
3133 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB        16
3134
3135 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK         0x0000FF00
3136 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB          8
3137
3138 #define RADAR_REPORT_REG1_PULSE_DUR_MASK                0x000000FF
3139 #define RADAR_REPORT_REG1_PULSE_DUR_LSB                 0
3140
3141 struct phyerr_fft_report {
3142         __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3143         __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3144 } __packed;
3145
3146 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK       0xFF800000
3147 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB        23
3148
3149 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK         0x007FC000
3150 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB          14
3151
3152 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK         0x00003000
3153 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB          12
3154
3155 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK           0x00000FFF
3156 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB            0
3157
3158 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK           0xFC000000
3159 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB            26
3160
3161 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK           0x03FC0000
3162 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB            18
3163
3164 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK            0x0003FF00
3165 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB             8
3166
3167 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK     0x000000FF
3168 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB      0
3169
3170 struct phyerr_tlv {
3171         __le16 len;
3172         u8 tag;
3173         u8 sig;
3174 } __packed;
3175
3176 #define DFS_RSSI_POSSIBLY_FALSE                 50
3177 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE       40
3178
3179 struct wmi_mgmt_tx_hdr {
3180         __le32 vdev_id;
3181         struct wmi_mac_addr peer_macaddr;
3182         __le32 tx_rate;
3183         __le32 tx_power;
3184         __le32 buf_len;
3185 } __packed;
3186
3187 struct wmi_mgmt_tx_cmd {
3188         struct wmi_mgmt_tx_hdr hdr;
3189         u8 buf[0];
3190 } __packed;
3191
3192 struct wmi_echo_event {
3193         __le32 value;
3194 } __packed;
3195
3196 struct wmi_echo_cmd {
3197         __le32 value;
3198 } __packed;
3199
3200 struct wmi_pdev_set_regdomain_cmd {
3201         __le32 reg_domain;
3202         __le32 reg_domain_2G;
3203         __le32 reg_domain_5G;
3204         __le32 conformance_test_limit_2G;
3205         __le32 conformance_test_limit_5G;
3206 } __packed;
3207
3208 enum wmi_dfs_region {
3209         /* Uninitialized dfs domain */
3210         WMI_UNINIT_DFS_DOMAIN = 0,
3211
3212         /* FCC3 dfs domain */
3213         WMI_FCC_DFS_DOMAIN = 1,
3214
3215         /* ETSI dfs domain */
3216         WMI_ETSI_DFS_DOMAIN = 2,
3217
3218         /*Japan dfs domain */
3219         WMI_MKK4_DFS_DOMAIN = 3,
3220 };
3221
3222 struct wmi_pdev_set_regdomain_cmd_10x {
3223         __le32 reg_domain;
3224         __le32 reg_domain_2G;
3225         __le32 reg_domain_5G;
3226         __le32 conformance_test_limit_2G;
3227         __le32 conformance_test_limit_5G;
3228
3229         /* dfs domain from wmi_dfs_region */
3230         __le32 dfs_domain;
3231 } __packed;
3232
3233 /* Command to set/unset chip in quiet mode */
3234 struct wmi_pdev_set_quiet_cmd {
3235         /* period in TUs */
3236         __le32 period;
3237
3238         /* duration in TUs */
3239         __le32 duration;
3240
3241         /* offset in TUs */
3242         __le32 next_start;
3243
3244         /* enable/disable */
3245         __le32 enabled;
3246 } __packed;
3247
3248 /*
3249  * 802.11g protection mode.
3250  */
3251 enum ath10k_protmode {
3252         ATH10K_PROT_NONE     = 0,    /* no protection */
3253         ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3254         ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3255 };
3256
3257 enum wmi_rtscts_profile {
3258         WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3259         WMI_RTSCTS_FOR_SECOND_RATESERIES,
3260         WMI_RTSCTS_ACROSS_SW_RETRIES
3261 };
3262
3263 #define WMI_RTSCTS_ENABLED              1
3264 #define WMI_RTSCTS_SET_MASK             0x0f
3265 #define WMI_RTSCTS_SET_LSB              0
3266
3267 #define WMI_RTSCTS_PROFILE_MASK         0xf0
3268 #define WMI_RTSCTS_PROFILE_LSB          4
3269
3270 enum wmi_beacon_gen_mode {
3271         WMI_BEACON_STAGGERED_MODE = 0,
3272         WMI_BEACON_BURST_MODE = 1
3273 };
3274
3275 enum wmi_csa_event_ies_present_flag {
3276         WMI_CSA_IE_PRESENT = 0x00000001,
3277         WMI_XCSA_IE_PRESENT = 0x00000002,
3278         WMI_WBW_IE_PRESENT = 0x00000004,
3279         WMI_CSWARP_IE_PRESENT = 0x00000008,
3280 };
3281
3282 /* wmi CSA receive event from beacon frame */
3283 struct wmi_csa_event {
3284         __le32 i_fc_dur;
3285         /* Bit 0-15: FC */
3286         /* Bit 16-31: DUR */
3287         struct wmi_mac_addr i_addr1;
3288         struct wmi_mac_addr i_addr2;
3289         __le32 csa_ie[2];
3290         __le32 xcsa_ie[2];
3291         __le32 wb_ie[2];
3292         __le32 cswarp_ie;
3293         __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3294 } __packed;
3295
3296 /* the definition of different PDEV parameters */
3297 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3298 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3299 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3300
3301 struct wmi_pdev_param_map {
3302         u32 tx_chain_mask;
3303         u32 rx_chain_mask;
3304         u32 txpower_limit2g;
3305         u32 txpower_limit5g;
3306         u32 txpower_scale;
3307         u32 beacon_gen_mode;
3308         u32 beacon_tx_mode;
3309         u32 resmgr_offchan_mode;
3310         u32 protection_mode;
3311         u32 dynamic_bw;
3312         u32 non_agg_sw_retry_th;
3313         u32 agg_sw_retry_th;
3314         u32 sta_kickout_th;
3315         u32 ac_aggrsize_scaling;
3316         u32 ltr_enable;
3317         u32 ltr_ac_latency_be;
3318         u32 ltr_ac_latency_bk;
3319         u32 ltr_ac_latency_vi;
3320         u32 ltr_ac_latency_vo;
3321         u32 ltr_ac_latency_timeout;
3322         u32 ltr_sleep_override;
3323         u32 ltr_rx_override;
3324         u32 ltr_tx_activity_timeout;
3325         u32 l1ss_enable;
3326         u32 dsleep_enable;
3327         u32 pcielp_txbuf_flush;
3328         u32 pcielp_txbuf_watermark;
3329         u32 pcielp_txbuf_tmo_en;
3330         u32 pcielp_txbuf_tmo_value;
3331         u32 pdev_stats_update_period;
3332         u32 vdev_stats_update_period;
3333         u32 peer_stats_update_period;
3334         u32 bcnflt_stats_update_period;
3335         u32 pmf_qos;
3336         u32 arp_ac_override;
3337         u32 dcs;
3338         u32 ani_enable;
3339         u32 ani_poll_period;
3340         u32 ani_listen_period;
3341         u32 ani_ofdm_level;
3342         u32 ani_cck_level;
3343         u32 dyntxchain;
3344         u32 proxy_sta;
3345         u32 idle_ps_config;
3346         u32 power_gating_sleep;
3347         u32 fast_channel_reset;
3348         u32 burst_dur;
3349         u32 burst_enable;
3350         u32 cal_period;
3351         u32 aggr_burst;
3352         u32 rx_decap_mode;
3353         u32 smart_antenna_default_antenna;
3354         u32 igmpmld_override;
3355         u32 igmpmld_tid;
3356         u32 antenna_gain;
3357         u32 rx_filter;
3358         u32 set_mcast_to_ucast_tid;
3359         u32 proxy_sta_mode;
3360         u32 set_mcast2ucast_mode;
3361         u32 set_mcast2ucast_buffer;
3362         u32 remove_mcast2ucast_buffer;
3363         u32 peer_sta_ps_statechg_enable;
3364         u32 igmpmld_ac_override;
3365         u32 block_interbss;
3366         u32 set_disable_reset_cmdid;
3367         u32 set_msdu_ttl_cmdid;
3368         u32 set_ppdu_duration_cmdid;
3369         u32 txbf_sound_period_cmdid;
3370         u32 set_promisc_mode_cmdid;
3371         u32 set_burst_mode_cmdid;
3372         u32 en_stats;
3373         u32 mu_group_policy;
3374         u32 noise_detection;
3375         u32 noise_threshold;
3376         u32 dpd_enable;
3377         u32 set_mcast_bcast_echo;
3378         u32 atf_strict_sch;
3379         u32 atf_sched_duration;
3380         u32 ant_plzn;
3381         u32 mgmt_retry_limit;
3382         u32 sensitivity_level;
3383         u32 signed_txpower_2g;
3384         u32 signed_txpower_5g;
3385         u32 enable_per_tid_amsdu;
3386         u32 enable_per_tid_ampdu;
3387         u32 cca_threshold;
3388         u32 rts_fixed_rate;
3389         u32 pdev_reset;
3390         u32 wapi_mbssid_offset;
3391         u32 arp_srcaddr;
3392         u32 arp_dstaddr;
3393 };
3394
3395 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3396
3397 enum wmi_pdev_param {
3398         /* TX chain mask */
3399         WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3400         /* RX chain mask */
3401         WMI_PDEV_PARAM_RX_CHAIN_MASK,
3402         /* TX power limit for 2G Radio */
3403         WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3404         /* TX power limit for 5G Radio */
3405         WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3406         /* TX power scale */
3407         WMI_PDEV_PARAM_TXPOWER_SCALE,
3408         /* Beacon generation mode . 0: host, 1: target   */
3409         WMI_PDEV_PARAM_BEACON_GEN_MODE,
3410         /* Beacon generation mode . 0: staggered 1: bursted   */
3411         WMI_PDEV_PARAM_BEACON_TX_MODE,
3412         /*
3413          * Resource manager off chan mode .
3414          * 0: turn off off chan mode. 1: turn on offchan mode
3415          */
3416         WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3417         /*
3418          * Protection mode:
3419          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3420          */
3421         WMI_PDEV_PARAM_PROTECTION_MODE,
3422         /*
3423          * Dynamic bandwidth - 0: disable, 1: enable
3424          *
3425          * When enabled HW rate control tries different bandwidths when
3426          * retransmitting frames.
3427          */
3428         WMI_PDEV_PARAM_DYNAMIC_BW,
3429         /* Non aggregrate/ 11g sw retry threshold.0-disable */
3430         WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3431         /* aggregrate sw retry threshold. 0-disable*/
3432         WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3433         /* Station kickout threshold (non of consecutive failures).0-disable */
3434         WMI_PDEV_PARAM_STA_KICKOUT_TH,
3435         /* Aggerate size scaling configuration per AC */
3436         WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3437         /* LTR enable */
3438         WMI_PDEV_PARAM_LTR_ENABLE,
3439         /* LTR latency for BE, in us */
3440         WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3441         /* LTR latency for BK, in us */
3442         WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3443         /* LTR latency for VI, in us */
3444         WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3445         /* LTR latency for VO, in us  */
3446         WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3447         /* LTR AC latency timeout, in ms */
3448         WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3449         /* LTR platform latency override, in us */
3450         WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3451         /* LTR-RX override, in us */
3452         WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3453         /* Tx activity timeout for LTR, in us */
3454         WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3455         /* L1SS state machine enable */
3456         WMI_PDEV_PARAM_L1SS_ENABLE,
3457         /* Deep sleep state machine enable */
3458         WMI_PDEV_PARAM_DSLEEP_ENABLE,
3459         /* RX buffering flush enable */
3460         WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3461         /* RX buffering matermark */
3462         WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3463         /* RX buffering timeout enable */
3464         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3465         /* RX buffering timeout value */
3466         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3467         /* pdev level stats update period in ms */
3468         WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3469         /* vdev level stats update period in ms */
3470         WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3471         /* peer level stats update period in ms */
3472         WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3473         /* beacon filter status update period */
3474         WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3475         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3476         WMI_PDEV_PARAM_PMF_QOS,
3477         /* Access category on which ARP frames are sent */
3478         WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3479         /* DCS configuration */
3480         WMI_PDEV_PARAM_DCS,
3481         /* Enable/Disable ANI on target */
3482         WMI_PDEV_PARAM_ANI_ENABLE,
3483         /* configure the ANI polling period */
3484         WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3485         /* configure the ANI listening period */
3486         WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3487         /* configure OFDM immunity level */
3488         WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3489         /* configure CCK immunity level */
3490         WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3491         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3492         WMI_PDEV_PARAM_DYNTXCHAIN,
3493         /* Enable/Disable proxy STA */
3494         WMI_PDEV_PARAM_PROXY_STA,
3495         /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3496         WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3497         /* Enable/Disable power gating sleep */
3498         WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3499 };
3500
3501 enum wmi_10x_pdev_param {
3502         /* TX chian mask */
3503         WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3504         /* RX chian mask */
3505         WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3506         /* TX power limit for 2G Radio */
3507         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3508         /* TX power limit for 5G Radio */
3509         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3510         /* TX power scale */
3511         WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3512         /* Beacon generation mode . 0: host, 1: target   */
3513         WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3514         /* Beacon generation mode . 0: staggered 1: bursted   */
3515         WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3516         /*
3517          * Resource manager off chan mode .
3518          * 0: turn off off chan mode. 1: turn on offchan mode
3519          */
3520         WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3521         /*
3522          * Protection mode:
3523          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3524          */
3525         WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3526         /* Dynamic bandwidth 0: disable 1: enable */
3527         WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3528         /* Non aggregrate/ 11g sw retry threshold.0-disable */
3529         WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3530         /* aggregrate sw retry threshold. 0-disable*/
3531         WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3532         /* Station kickout threshold (non of consecutive failures).0-disable */
3533         WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3534         /* Aggerate size scaling configuration per AC */
3535         WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3536         /* LTR enable */
3537         WMI_10X_PDEV_PARAM_LTR_ENABLE,
3538         /* LTR latency for BE, in us */
3539         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3540         /* LTR latency for BK, in us */
3541         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3542         /* LTR latency for VI, in us */
3543         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3544         /* LTR latency for VO, in us  */
3545         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3546         /* LTR AC latency timeout, in ms */
3547         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3548         /* LTR platform latency override, in us */
3549         WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3550         /* LTR-RX override, in us */
3551         WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3552         /* Tx activity timeout for LTR, in us */
3553         WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3554         /* L1SS state machine enable */
3555         WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3556         /* Deep sleep state machine enable */
3557         WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3558         /* pdev level stats update period in ms */
3559         WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3560         /* vdev level stats update period in ms */
3561         WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3562         /* peer level stats update period in ms */
3563         WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3564         /* beacon filter status update period */
3565         WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3566         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3567         WMI_10X_PDEV_PARAM_PMF_QOS,
3568         /* Access category on which ARP and DHCP frames are sent */
3569         WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3570         /* DCS configuration */
3571         WMI_10X_PDEV_PARAM_DCS,
3572         /* Enable/Disable ANI on target */
3573         WMI_10X_PDEV_PARAM_ANI_ENABLE,
3574         /* configure the ANI polling period */
3575         WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3576         /* configure the ANI listening period */
3577         WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
3578         /* configure OFDM immunity level */
3579         WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
3580         /* configure CCK immunity level */
3581         WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
3582         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3583         WMI_10X_PDEV_PARAM_DYNTXCHAIN,
3584         /* Enable/Disable Fast channel reset*/
3585         WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
3586         /* Set Bursting DUR */
3587         WMI_10X_PDEV_PARAM_BURST_DUR,
3588         /* Set Bursting Enable*/
3589         WMI_10X_PDEV_PARAM_BURST_ENABLE,
3590
3591         /* following are available as of firmware 10.2 */
3592         WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3593         WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
3594         WMI_10X_PDEV_PARAM_IGMPMLD_TID,
3595         WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
3596         WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
3597         WMI_10X_PDEV_PARAM_RX_FILTER,
3598         WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
3599         WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
3600         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3601         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3602         WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3603         WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
3604         WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
3605         WMI_10X_PDEV_PARAM_CAL_PERIOD
3606 };
3607
3608 enum wmi_10_4_pdev_param {
3609         WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3610         WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
3611         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
3612         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
3613         WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
3614         WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
3615         WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
3616         WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3617         WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
3618         WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
3619         WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3620         WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
3621         WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
3622         WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3623         WMI_10_4_PDEV_PARAM_LTR_ENABLE,
3624         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
3625         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
3626         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
3627         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
3628         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3629         WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3630         WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
3631         WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3632         WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
3633         WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
3634         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3635         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3636         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3637         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3638         WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3639         WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3640         WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3641         WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3642         WMI_10_4_PDEV_PARAM_PMF_QOS,
3643         WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
3644         WMI_10_4_PDEV_PARAM_DCS,
3645         WMI_10_4_PDEV_PARAM_ANI_ENABLE,
3646         WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
3647         WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
3648         WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
3649         WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
3650         WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
3651         WMI_10_4_PDEV_PARAM_PROXY_STA,
3652         WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
3653         WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
3654         WMI_10_4_PDEV_PARAM_AGGR_BURST,
3655         WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
3656         WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
3657         WMI_10_4_PDEV_PARAM_BURST_DUR,
3658         WMI_10_4_PDEV_PARAM_BURST_ENABLE,
3659         WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3660         WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
3661         WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
3662         WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
3663         WMI_10_4_PDEV_PARAM_RX_FILTER,
3664         WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
3665         WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
3666         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3667         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3668         WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3669         WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
3670         WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
3671         WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
3672         WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
3673         WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
3674         WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
3675         WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
3676         WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
3677         WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
3678         WMI_10_4_PDEV_PARAM_EN_STATS,
3679         WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
3680         WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
3681         WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
3682         WMI_10_4_PDEV_PARAM_DPD_ENABLE,
3683         WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
3684         WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
3685         WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
3686         WMI_10_4_PDEV_PARAM_ANT_PLZN,
3687         WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
3688         WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
3689         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
3690         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
3691         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
3692         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
3693         WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
3694         WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
3695         WMI_10_4_PDEV_PARAM_CAL_PERIOD,
3696         WMI_10_4_PDEV_PARAM_PDEV_RESET,
3697         WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
3698         WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
3699         WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
3700         WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
3701         WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
3702         WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
3703         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
3704         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
3705         WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
3706 };
3707
3708 struct wmi_pdev_set_param_cmd {
3709         __le32 param_id;
3710         __le32 param_value;
3711 } __packed;
3712
3713 /* valid period is 1 ~ 60000ms, unit in millisecond */
3714 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
3715
3716 struct wmi_pdev_get_tpc_config_cmd {
3717         /* parameter   */
3718         __le32 param;
3719 } __packed;
3720
3721 #define WMI_TPC_CONFIG_PARAM            1
3722 #define WMI_TPC_RATE_MAX                160
3723 #define WMI_TPC_TX_N_CHAIN              4
3724 #define WMI_TPC_PREAM_TABLE_MAX         10
3725 #define WMI_TPC_FLAG                    3
3726 #define WMI_TPC_BUF_SIZE                10
3727
3728 enum wmi_tpc_table_type {
3729         WMI_TPC_TABLE_TYPE_CDD = 0,
3730         WMI_TPC_TABLE_TYPE_STBC = 1,
3731         WMI_TPC_TABLE_TYPE_TXBF = 2,
3732 };
3733
3734 enum wmi_tpc_config_event_flag {
3735         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD     = 0x1,
3736         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC    = 0x2,
3737         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF    = 0x4,
3738 };
3739
3740 struct wmi_pdev_tpc_config_event {
3741         __le32 reg_domain;
3742         __le32 chan_freq;
3743         __le32 phy_mode;
3744         __le32 twice_antenna_reduction;
3745         __le32 twice_max_rd_power;
3746         a_sle32 twice_antenna_gain;
3747         __le32 power_limit;
3748         __le32 rate_max;
3749         __le32 num_tx_chain;
3750         __le32 ctl;
3751         __le32 flags;
3752         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
3753         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3754         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3755         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
3756         u8 rates_array[WMI_TPC_RATE_MAX];
3757 } __packed;
3758
3759 /* Transmit power scale factor. */
3760 enum wmi_tp_scale {
3761         WMI_TP_SCALE_MAX    = 0,        /* no scaling (default) */
3762         WMI_TP_SCALE_50     = 1,        /* 50% of max (-3 dBm) */
3763         WMI_TP_SCALE_25     = 2,        /* 25% of max (-6 dBm) */
3764         WMI_TP_SCALE_12     = 3,        /* 12% of max (-9 dBm) */
3765         WMI_TP_SCALE_MIN    = 4,        /* min, but still on   */
3766         WMI_TP_SCALE_SIZE   = 5,        /* max num of enum     */
3767 };
3768
3769 struct wmi_pdev_chanlist_update_event {
3770         /* number of channels */
3771         __le32 num_chan;
3772         /* array of channels */
3773         struct wmi_channel channel_list[1];
3774 } __packed;
3775
3776 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
3777
3778 struct wmi_debug_mesg_event {
3779         /* message buffer, NULL terminated */
3780         char bufp[WMI_MAX_DEBUG_MESG];
3781 } __packed;
3782
3783 enum {
3784         /* P2P device */
3785         VDEV_SUBTYPE_P2PDEV = 0,
3786         /* P2P client */
3787         VDEV_SUBTYPE_P2PCLI,
3788         /* P2P GO */
3789         VDEV_SUBTYPE_P2PGO,
3790         /* BT3.0 HS */
3791         VDEV_SUBTYPE_BT,
3792 };
3793
3794 struct wmi_pdev_set_channel_cmd {
3795         /* idnore power , only use flags , mode and freq */
3796         struct wmi_channel chan;
3797 } __packed;
3798
3799 struct wmi_pdev_pktlog_enable_cmd {
3800         __le32 ev_bitmap;
3801 } __packed;
3802
3803 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
3804 #define WMI_DSCP_MAP_MAX    (64)
3805 struct wmi_pdev_set_dscp_tid_map_cmd {
3806         /* map indicating DSCP to TID conversion */
3807         __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
3808 } __packed;
3809
3810 enum mcast_bcast_rate_id {
3811         WMI_SET_MCAST_RATE,
3812         WMI_SET_BCAST_RATE
3813 };
3814
3815 struct mcast_bcast_rate {
3816         enum mcast_bcast_rate_id rate_id;
3817         __le32 rate;
3818 } __packed;
3819
3820 struct wmi_wmm_params {
3821         __le32 cwmin;
3822         __le32 cwmax;
3823         __le32 aifs;
3824         __le32 txop;
3825         __le32 acm;
3826         __le32 no_ack;
3827 } __packed;
3828
3829 struct wmi_pdev_set_wmm_params {
3830         struct wmi_wmm_params ac_be;
3831         struct wmi_wmm_params ac_bk;
3832         struct wmi_wmm_params ac_vi;
3833         struct wmi_wmm_params ac_vo;
3834 } __packed;
3835
3836 struct wmi_wmm_params_arg {
3837         u32 cwmin;
3838         u32 cwmax;
3839         u32 aifs;
3840         u32 txop;
3841         u32 acm;
3842         u32 no_ack;
3843 };
3844
3845 struct wmi_wmm_params_all_arg {
3846         struct wmi_wmm_params_arg ac_be;
3847         struct wmi_wmm_params_arg ac_bk;
3848         struct wmi_wmm_params_arg ac_vi;
3849         struct wmi_wmm_params_arg ac_vo;
3850 };
3851
3852 struct wmi_pdev_stats_tx {
3853         /* Num HTT cookies queued to dispatch list */
3854         __le32 comp_queued;
3855
3856         /* Num HTT cookies dispatched */
3857         __le32 comp_delivered;
3858
3859         /* Num MSDU queued to WAL */
3860         __le32 msdu_enqued;
3861
3862         /* Num MPDU queue to WAL */
3863         __le32 mpdu_enqued;
3864
3865         /* Num MSDUs dropped by WMM limit */
3866         __le32 wmm_drop;
3867
3868         /* Num Local frames queued */
3869         __le32 local_enqued;
3870
3871         /* Num Local frames done */
3872         __le32 local_freed;
3873
3874         /* Num queued to HW */
3875         __le32 hw_queued;
3876
3877         /* Num PPDU reaped from HW */
3878         __le32 hw_reaped;
3879
3880         /* Num underruns */
3881         __le32 underrun;
3882
3883         /* Num PPDUs cleaned up in TX abort */
3884         __le32 tx_abort;
3885
3886         /* Num MPDUs requed by SW */
3887         __le32 mpdus_requed;
3888
3889         /* excessive retries */
3890         __le32 tx_ko;
3891
3892         /* data hw rate code */
3893         __le32 data_rc;
3894
3895         /* Scheduler self triggers */
3896         __le32 self_triggers;
3897
3898         /* frames dropped due to excessive sw retries */
3899         __le32 sw_retry_failure;
3900
3901         /* illegal rate phy errors  */
3902         __le32 illgl_rate_phy_err;
3903
3904         /* wal pdev continous xretry */
3905         __le32 pdev_cont_xretry;
3906
3907         /* wal pdev continous xretry */
3908         __le32 pdev_tx_timeout;
3909
3910         /* wal pdev resets  */
3911         __le32 pdev_resets;
3912
3913         /* frames dropped due to non-availability of stateless TIDs */
3914         __le32 stateless_tid_alloc_failure;
3915
3916         __le32 phy_underrun;
3917
3918         /* MPDU is more than txop limit */
3919         __le32 txop_ovf;
3920 } __packed;
3921
3922 struct wmi_10_4_pdev_stats_tx {
3923         /* Num HTT cookies queued to dispatch list */
3924         __le32 comp_queued;
3925
3926         /* Num HTT cookies dispatched */
3927         __le32 comp_delivered;
3928
3929         /* Num MSDU queued to WAL */
3930         __le32 msdu_enqued;
3931
3932         /* Num MPDU queue to WAL */
3933         __le32 mpdu_enqued;
3934
3935         /* Num MSDUs dropped by WMM limit */
3936         __le32 wmm_drop;
3937
3938         /* Num Local frames queued */
3939         __le32 local_enqued;
3940
3941         /* Num Local frames done */
3942         __le32 local_freed;
3943
3944         /* Num queued to HW */
3945         __le32 hw_queued;
3946
3947         /* Num PPDU reaped from HW */
3948         __le32 hw_reaped;
3949
3950         /* Num underruns */
3951         __le32 underrun;
3952
3953         /* HW Paused. */
3954         __le32  hw_paused;
3955
3956         /* Num PPDUs cleaned up in TX abort */
3957         __le32 tx_abort;
3958
3959         /* Num MPDUs requed by SW */
3960         __le32 mpdus_requed;
3961
3962         /* excessive retries */
3963         __le32 tx_ko;
3964
3965         /* data hw rate code */
3966         __le32 data_rc;
3967
3968         /* Scheduler self triggers */
3969         __le32 self_triggers;
3970
3971         /* frames dropped due to excessive sw retries */
3972         __le32 sw_retry_failure;
3973
3974         /* illegal rate phy errors  */
3975         __le32 illgl_rate_phy_err;
3976
3977         /* wal pdev continuous xretry */
3978         __le32 pdev_cont_xretry;
3979
3980         /* wal pdev tx timeouts */
3981         __le32 pdev_tx_timeout;
3982
3983         /* wal pdev resets  */
3984         __le32 pdev_resets;
3985
3986         /* frames dropped due to non-availability of stateless TIDs */
3987         __le32 stateless_tid_alloc_failure;
3988
3989         __le32 phy_underrun;
3990
3991         /* MPDU is more than txop limit */
3992         __le32 txop_ovf;
3993
3994         /* Number of Sequences posted */
3995         __le32 seq_posted;
3996
3997         /* Number of Sequences failed queueing */
3998         __le32 seq_failed_queueing;
3999
4000         /* Number of Sequences completed */
4001         __le32 seq_completed;
4002
4003         /* Number of Sequences restarted */
4004         __le32 seq_restarted;
4005
4006         /* Number of MU Sequences posted */
4007         __le32 mu_seq_posted;
4008
4009         /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4010         __le32 mpdus_sw_flush;
4011
4012         /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4013         __le32 mpdus_hw_filter;
4014
4015         /* Num MPDUs truncated by PDG
4016          * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4017          */
4018         __le32 mpdus_truncated;
4019
4020         /* Num MPDUs that was tried but didn't receive ACK or BA */
4021         __le32 mpdus_ack_failed;
4022
4023         /* Num MPDUs that was dropped due to expiry. */
4024         __le32 mpdus_expired;
4025 } __packed;
4026
4027 struct wmi_pdev_stats_rx {
4028         /* Cnts any change in ring routing mid-ppdu */
4029         __le32 mid_ppdu_route_change;
4030
4031         /* Total number of statuses processed */
4032         __le32 status_rcvd;
4033
4034         /* Extra frags on rings 0-3 */
4035         __le32 r0_frags;
4036         __le32 r1_frags;
4037         __le32 r2_frags;
4038         __le32 r3_frags;
4039
4040         /* MSDUs / MPDUs delivered to HTT */
4041         __le32 htt_msdus;
4042         __le32 htt_mpdus;
4043
4044         /* MSDUs / MPDUs delivered to local stack */
4045         __le32 loc_msdus;
4046         __le32 loc_mpdus;
4047
4048         /* AMSDUs that have more MSDUs than the status ring size */
4049         __le32 oversize_amsdu;
4050
4051         /* Number of PHY errors */
4052         __le32 phy_errs;
4053
4054         /* Number of PHY errors drops */
4055         __le32 phy_err_drop;
4056
4057         /* Number of mpdu errors - FCS, MIC, ENC etc. */
4058         __le32 mpdu_errs;
4059 } __packed;
4060
4061 struct wmi_pdev_stats_peer {
4062         /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4063         __le32 dummy;
4064 } __packed;
4065
4066 enum wmi_stats_id {
4067         WMI_STAT_PEER = BIT(0),
4068         WMI_STAT_AP = BIT(1),
4069         WMI_STAT_PDEV = BIT(2),
4070         WMI_STAT_VDEV = BIT(3),
4071         WMI_STAT_BCNFLT = BIT(4),
4072         WMI_STAT_VDEV_RATE = BIT(5),
4073 };
4074
4075 struct wlan_inst_rssi_args {
4076         __le16 cfg_retry_count;
4077         __le16 retry_count;
4078 };
4079
4080 struct wmi_request_stats_cmd {
4081         __le32 stats_id;
4082
4083         __le32 vdev_id;
4084
4085         /* peer MAC address */
4086         struct wmi_mac_addr peer_macaddr;
4087
4088         /* Instantaneous RSSI arguments */
4089         struct wlan_inst_rssi_args inst_rssi_args;
4090 } __packed;
4091
4092 /* Suspend option */
4093 enum {
4094         /* suspend */
4095         WMI_PDEV_SUSPEND,
4096
4097         /* suspend and disable all interrupts */
4098         WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4099 };
4100
4101 struct wmi_pdev_suspend_cmd {
4102         /* suspend option sent to target */
4103         __le32 suspend_opt;
4104 } __packed;
4105
4106 struct wmi_stats_event {
4107         __le32 stats_id; /* WMI_STAT_ */
4108         /*
4109          * number of pdev stats event structures
4110          * (wmi_pdev_stats) 0 or 1
4111          */
4112         __le32 num_pdev_stats;
4113         /*
4114          * number of vdev stats event structures
4115          * (wmi_vdev_stats) 0 or max vdevs
4116          */
4117         __le32 num_vdev_stats;
4118         /*
4119          * number of peer stats event structures
4120          * (wmi_peer_stats) 0 or max peers
4121          */
4122         __le32 num_peer_stats;
4123         __le32 num_bcnflt_stats;
4124         /*
4125          * followed by
4126          *   num_pdev_stats * size of(struct wmi_pdev_stats)
4127          *   num_vdev_stats * size of(struct wmi_vdev_stats)
4128          *   num_peer_stats * size of(struct wmi_peer_stats)
4129          *
4130          *  By having a zero sized array, the pointer to data area
4131          *  becomes available without increasing the struct size
4132          */
4133         u8 data[0];
4134 } __packed;
4135
4136 struct wmi_10_2_stats_event {
4137         __le32 stats_id; /* %WMI_REQUEST_ */
4138         __le32 num_pdev_stats;
4139         __le32 num_pdev_ext_stats;
4140         __le32 num_vdev_stats;
4141         __le32 num_peer_stats;
4142         __le32 num_bcnflt_stats;
4143         u8 data[0];
4144 } __packed;
4145
4146 /*
4147  * PDEV statistics
4148  * TODO: add all PDEV stats here
4149  */
4150 struct wmi_pdev_stats_base {
4151         __le32 chan_nf;
4152         __le32 tx_frame_count;
4153         __le32 rx_frame_count;
4154         __le32 rx_clear_count;
4155         __le32 cycle_count;
4156         __le32 phy_err_count;
4157         __le32 chan_tx_pwr;
4158 } __packed;
4159
4160 struct wmi_pdev_stats {
4161         struct wmi_pdev_stats_base base;
4162         struct wmi_pdev_stats_tx tx;
4163         struct wmi_pdev_stats_rx rx;
4164         struct wmi_pdev_stats_peer peer;
4165 } __packed;
4166
4167 struct wmi_pdev_stats_extra {
4168         __le32 ack_rx_bad;
4169         __le32 rts_bad;
4170         __le32 rts_good;
4171         __le32 fcs_bad;
4172         __le32 no_beacons;
4173         __le32 mib_int_count;
4174 } __packed;
4175
4176 struct wmi_10x_pdev_stats {
4177         struct wmi_pdev_stats_base base;
4178         struct wmi_pdev_stats_tx tx;
4179         struct wmi_pdev_stats_rx rx;
4180         struct wmi_pdev_stats_peer peer;
4181         struct wmi_pdev_stats_extra extra;
4182 } __packed;
4183
4184 struct wmi_pdev_stats_mem {
4185         __le32 dram_free;
4186         __le32 iram_free;
4187 } __packed;
4188
4189 struct wmi_10_2_pdev_stats {
4190         struct wmi_pdev_stats_base base;
4191         struct wmi_pdev_stats_tx tx;
4192         __le32 mc_drop;
4193         struct wmi_pdev_stats_rx rx;
4194         __le32 pdev_rx_timeout;
4195         struct wmi_pdev_stats_mem mem;
4196         struct wmi_pdev_stats_peer peer;
4197         struct wmi_pdev_stats_extra extra;
4198 } __packed;
4199
4200 struct wmi_10_4_pdev_stats {
4201         struct wmi_pdev_stats_base base;
4202         struct wmi_10_4_pdev_stats_tx tx;
4203         struct wmi_pdev_stats_rx rx;
4204         __le32 rx_ovfl_errs;
4205         struct wmi_pdev_stats_mem mem;
4206         __le32 sram_free_size;
4207         struct wmi_pdev_stats_extra extra;
4208 } __packed;
4209
4210 /*
4211  * VDEV statistics
4212  * TODO: add all VDEV stats here
4213  */
4214 struct wmi_vdev_stats {
4215         __le32 vdev_id;
4216 } __packed;
4217
4218 /*
4219  * peer statistics.
4220  * TODO: add more stats
4221  */
4222 struct wmi_peer_stats {
4223         struct wmi_mac_addr peer_macaddr;
4224         __le32 peer_rssi;
4225         __le32 peer_tx_rate;
4226 } __packed;
4227
4228 struct wmi_10x_peer_stats {
4229         struct wmi_peer_stats old;
4230         __le32 peer_rx_rate;
4231 } __packed;
4232
4233 struct wmi_10_2_peer_stats {
4234         struct wmi_peer_stats old;
4235         __le32 peer_rx_rate;
4236         __le32 current_per;
4237         __le32 retries;
4238         __le32 tx_rate_count;
4239         __le32 max_4ms_frame_len;
4240         __le32 total_sub_frames;
4241         __le32 tx_bytes;
4242         __le32 num_pkt_loss_overflow[4];
4243         __le32 num_pkt_loss_excess_retry[4];
4244 } __packed;
4245
4246 struct wmi_10_2_4_peer_stats {
4247         struct wmi_10_2_peer_stats common;
4248         __le32 peer_rssi_changed;
4249 } __packed;
4250
4251 struct wmi_10_2_4_ext_peer_stats {
4252         struct wmi_10_2_peer_stats common;
4253         __le32 peer_rssi_changed;
4254         __le32 rx_duration;
4255 } __packed;
4256
4257 struct wmi_10_4_peer_stats {
4258         struct wmi_mac_addr peer_macaddr;
4259         __le32 peer_rssi;
4260         __le32 peer_rssi_seq_num;
4261         __le32 peer_tx_rate;
4262         __le32 peer_rx_rate;
4263         __le32 current_per;
4264         __le32 retries;
4265         __le32 tx_rate_count;
4266         __le32 max_4ms_frame_len;
4267         __le32 total_sub_frames;
4268         __le32 tx_bytes;
4269         __le32 num_pkt_loss_overflow[4];
4270         __le32 num_pkt_loss_excess_retry[4];
4271         __le32 peer_rssi_changed;
4272 } __packed;
4273
4274 struct wmi_10_2_pdev_ext_stats {
4275         __le32 rx_rssi_comb;
4276         __le32 rx_rssi[4];
4277         __le32 rx_mcs[10];
4278         __le32 tx_mcs[10];
4279         __le32 ack_rssi;
4280 } __packed;
4281
4282 struct wmi_vdev_create_cmd {
4283         __le32 vdev_id;
4284         __le32 vdev_type;
4285         __le32 vdev_subtype;
4286         struct wmi_mac_addr vdev_macaddr;
4287 } __packed;
4288
4289 enum wmi_vdev_type {
4290         WMI_VDEV_TYPE_AP      = 1,
4291         WMI_VDEV_TYPE_STA     = 2,
4292         WMI_VDEV_TYPE_IBSS    = 3,
4293         WMI_VDEV_TYPE_MONITOR = 4,
4294 };
4295
4296 enum wmi_vdev_subtype {
4297         WMI_VDEV_SUBTYPE_NONE,
4298         WMI_VDEV_SUBTYPE_P2P_DEVICE,
4299         WMI_VDEV_SUBTYPE_P2P_CLIENT,
4300         WMI_VDEV_SUBTYPE_P2P_GO,
4301         WMI_VDEV_SUBTYPE_PROXY_STA,
4302         WMI_VDEV_SUBTYPE_MESH_11S,
4303         WMI_VDEV_SUBTYPE_MESH_NON_11S,
4304 };
4305
4306 enum wmi_vdev_subtype_legacy {
4307         WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
4308         WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
4309         WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
4310         WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
4311         WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4312 };
4313
4314 enum wmi_vdev_subtype_10_2_4 {
4315         WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
4316         WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
4317         WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
4318         WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
4319         WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4320         WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
4321 };
4322
4323 enum wmi_vdev_subtype_10_4 {
4324         WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
4325         WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
4326         WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
4327         WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
4328         WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
4329         WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4330         WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
4331 };
4332
4333 /* values for vdev_subtype */
4334
4335 /* values for vdev_start_request flags */
4336 /*
4337  * Indicates that AP VDEV uses hidden ssid. only valid for
4338  *  AP/GO */
4339 #define WMI_VDEV_START_HIDDEN_SSID  (1<<0)
4340 /*
4341  * Indicates if robust management frame/management frame
4342  *  protection is enabled. For GO/AP vdevs, it indicates that
4343  *  it may support station/client associations with RMF enabled.
4344  *  For STA/client vdevs, it indicates that sta will
4345  *  associate with AP with RMF enabled. */
4346 #define WMI_VDEV_START_PMF_ENABLED  (1<<1)
4347
4348 struct wmi_p2p_noa_descriptor {
4349         __le32 type_count; /* 255: continuous schedule, 0: reserved */
4350         __le32 duration;  /* Absent period duration in micro seconds */
4351         __le32 interval;   /* Absent period interval in micro seconds */
4352         __le32 start_time; /* 32 bit tsf time when in starts */
4353 } __packed;
4354
4355 struct wmi_vdev_start_request_cmd {
4356         /* WMI channel */
4357         struct wmi_channel chan;
4358         /* unique id identifying the VDEV, generated by the caller */
4359         __le32 vdev_id;
4360         /* requestor id identifying the caller module */
4361         __le32 requestor_id;
4362         /* beacon interval from received beacon */
4363         __le32 beacon_interval;
4364         /* DTIM Period from the received beacon */
4365         __le32 dtim_period;
4366         /* Flags */
4367         __le32 flags;
4368         /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4369         struct wmi_ssid ssid;
4370         /* beacon/probe reponse xmit rate. Applicable for SoftAP. */
4371         __le32 bcn_tx_rate;
4372         /* beacon/probe reponse xmit power. Applicable for SoftAP. */
4373         __le32 bcn_tx_power;
4374         /* number of p2p NOA descriptor(s) from scan entry */
4375         __le32 num_noa_descriptors;
4376         /*
4377          * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4378          * During CAC, Our HW shouldn't ack ditected frames
4379          */
4380         __le32 disable_hw_ack;
4381         /* actual p2p NOA descriptor from scan entry */
4382         struct wmi_p2p_noa_descriptor noa_descriptors[2];
4383 } __packed;
4384
4385 struct wmi_vdev_restart_request_cmd {
4386         struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4387 } __packed;
4388
4389 struct wmi_vdev_start_request_arg {
4390         u32 vdev_id;
4391         struct wmi_channel_arg channel;
4392         u32 bcn_intval;
4393         u32 dtim_period;
4394         u8 *ssid;
4395         u32 ssid_len;
4396         u32 bcn_tx_rate;
4397         u32 bcn_tx_power;
4398         bool disable_hw_ack;
4399         bool hidden_ssid;
4400         bool pmf_enabled;
4401 };
4402
4403 struct wmi_vdev_delete_cmd {
4404         /* unique id identifying the VDEV, generated by the caller */
4405         __le32 vdev_id;
4406 } __packed;
4407
4408 struct wmi_vdev_up_cmd {
4409         __le32 vdev_id;
4410         __le32 vdev_assoc_id;
4411         struct wmi_mac_addr vdev_bssid;
4412 } __packed;
4413
4414 struct wmi_vdev_stop_cmd {
4415         __le32 vdev_id;
4416 } __packed;
4417
4418 struct wmi_vdev_down_cmd {
4419         __le32 vdev_id;
4420 } __packed;
4421
4422 struct wmi_vdev_standby_response_cmd {
4423         /* unique id identifying the VDEV, generated by the caller */
4424         __le32 vdev_id;
4425 } __packed;
4426
4427 struct wmi_vdev_resume_response_cmd {
4428         /* unique id identifying the VDEV, generated by the caller */
4429         __le32 vdev_id;
4430 } __packed;
4431
4432 struct wmi_vdev_set_param_cmd {
4433         __le32 vdev_id;
4434         __le32 param_id;
4435         __le32 param_value;
4436 } __packed;
4437
4438 #define WMI_MAX_KEY_INDEX   3
4439 #define WMI_MAX_KEY_LEN     32
4440
4441 #define WMI_KEY_PAIRWISE 0x00
4442 #define WMI_KEY_GROUP    0x01
4443 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
4444
4445 struct wmi_key_seq_counter {
4446         __le32 key_seq_counter_l;
4447         __le32 key_seq_counter_h;
4448 } __packed;
4449
4450 #define WMI_CIPHER_NONE     0x0 /* clear key */
4451 #define WMI_CIPHER_WEP      0x1
4452 #define WMI_CIPHER_TKIP     0x2
4453 #define WMI_CIPHER_AES_OCB  0x3
4454 #define WMI_CIPHER_AES_CCM  0x4
4455 #define WMI_CIPHER_WAPI     0x5
4456 #define WMI_CIPHER_CKIP     0x6
4457 #define WMI_CIPHER_AES_CMAC 0x7
4458
4459 struct wmi_vdev_install_key_cmd {
4460         __le32 vdev_id;
4461         struct wmi_mac_addr peer_macaddr;
4462         __le32 key_idx;
4463         __le32 key_flags;
4464         __le32 key_cipher; /* %WMI_CIPHER_ */
4465         struct wmi_key_seq_counter key_rsc_counter;
4466         struct wmi_key_seq_counter key_global_rsc_counter;
4467         struct wmi_key_seq_counter key_tsc_counter;
4468         u8 wpi_key_rsc_counter[16];
4469         u8 wpi_key_tsc_counter[16];
4470         __le32 key_len;
4471         __le32 key_txmic_len;
4472         __le32 key_rxmic_len;
4473
4474         /* contains key followed by tx mic followed by rx mic */
4475         u8 key_data[0];
4476 } __packed;
4477
4478 struct wmi_vdev_install_key_arg {
4479         u32 vdev_id;
4480         const u8 *macaddr;
4481         u32 key_idx;
4482         u32 key_flags;
4483         u32 key_cipher;
4484         u32 key_len;
4485         u32 key_txmic_len;
4486         u32 key_rxmic_len;
4487         const void *key_data;
4488 };
4489
4490 /*
4491  * vdev fixed rate format:
4492  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
4493  * - nss      - b5:b4 - ss number (0 mean 1ss)
4494  * - rate_mcs - b3:b0 - as below
4495  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
4496  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
4497  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
4498  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
4499  *    HT/VHT: MCS index
4500  */
4501
4502 /* Preamble types to be used with VDEV fixed rate configuration */
4503 enum wmi_rate_preamble {
4504         WMI_RATE_PREAMBLE_OFDM,
4505         WMI_RATE_PREAMBLE_CCK,
4506         WMI_RATE_PREAMBLE_HT,
4507         WMI_RATE_PREAMBLE_VHT,
4508 };
4509
4510 #define ATH10K_HW_NSS(rate)             (1 + (((rate) >> 4) & 0x3))
4511 #define ATH10K_HW_PREAMBLE(rate)        (((rate) >> 6) & 0x3)
4512 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
4513         (((preamble) << 6) | ((nss) << 4) | (rate))
4514
4515 /* Value to disable fixed rate setting */
4516 #define WMI_FIXED_RATE_NONE    (0xff)
4517
4518 struct wmi_vdev_param_map {
4519         u32 rts_threshold;
4520         u32 fragmentation_threshold;
4521         u32 beacon_interval;
4522         u32 listen_interval;
4523         u32 multicast_rate;
4524         u32 mgmt_tx_rate;
4525         u32 slot_time;
4526         u32 preamble;
4527         u32 swba_time;
4528         u32 wmi_vdev_stats_update_period;
4529         u32 wmi_vdev_pwrsave_ageout_time;
4530         u32 wmi_vdev_host_swba_interval;
4531         u32 dtim_period;
4532         u32 wmi_vdev_oc_scheduler_air_time_limit;
4533         u32 wds;
4534         u32 atim_window;
4535         u32 bmiss_count_max;
4536         u32 bmiss_first_bcnt;
4537         u32 bmiss_final_bcnt;
4538         u32 feature_wmm;
4539         u32 chwidth;
4540         u32 chextoffset;
4541         u32 disable_htprotection;
4542         u32 sta_quickkickout;
4543         u32 mgmt_rate;
4544         u32 protection_mode;
4545         u32 fixed_rate;
4546         u32 sgi;
4547         u32 ldpc;
4548         u32 tx_stbc;
4549         u32 rx_stbc;
4550         u32 intra_bss_fwd;
4551         u32 def_keyid;
4552         u32 nss;
4553         u32 bcast_data_rate;
4554         u32 mcast_data_rate;
4555         u32 mcast_indicate;
4556         u32 dhcp_indicate;
4557         u32 unknown_dest_indicate;
4558         u32 ap_keepalive_min_idle_inactive_time_secs;
4559         u32 ap_keepalive_max_idle_inactive_time_secs;
4560         u32 ap_keepalive_max_unresponsive_time_secs;
4561         u32 ap_enable_nawds;
4562         u32 mcast2ucast_set;
4563         u32 enable_rtscts;
4564         u32 txbf;
4565         u32 packet_powersave;
4566         u32 drop_unencry;
4567         u32 tx_encap_type;
4568         u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
4569         u32 rc_num_retries;
4570         u32 cabq_maxdur;
4571         u32 mfptest_set;
4572         u32 rts_fixed_rate;
4573         u32 vht_sgimask;
4574         u32 vht80_ratemask;
4575         u32 early_rx_adjust_enable;
4576         u32 early_rx_tgt_bmiss_num;
4577         u32 early_rx_bmiss_sample_cycle;
4578         u32 early_rx_slop_step;
4579         u32 early_rx_init_slop;
4580         u32 early_rx_adjust_pause;
4581         u32 proxy_sta;
4582         u32 meru_vc;
4583         u32 rx_decap_type;
4584         u32 bw_nss_ratemask;
4585 };
4586
4587 #define WMI_VDEV_PARAM_UNSUPPORTED 0
4588
4589 /* the definition of different VDEV parameters */
4590 enum wmi_vdev_param {
4591         /* RTS Threshold */
4592         WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4593         /* Fragmentation threshold */
4594         WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4595         /* beacon interval in TUs */
4596         WMI_VDEV_PARAM_BEACON_INTERVAL,
4597         /* Listen interval in TUs */
4598         WMI_VDEV_PARAM_LISTEN_INTERVAL,
4599         /* muticast rate in Mbps */
4600         WMI_VDEV_PARAM_MULTICAST_RATE,
4601         /* management frame rate in Mbps */
4602         WMI_VDEV_PARAM_MGMT_TX_RATE,
4603         /* slot time (long vs short) */
4604         WMI_VDEV_PARAM_SLOT_TIME,
4605         /* preamble (long vs short) */
4606         WMI_VDEV_PARAM_PREAMBLE,
4607         /* SWBA time (time before tbtt in msec) */
4608         WMI_VDEV_PARAM_SWBA_TIME,
4609         /* time period for updating VDEV stats */
4610         WMI_VDEV_STATS_UPDATE_PERIOD,
4611         /* age out time in msec for frames queued for station in power save */
4612         WMI_VDEV_PWRSAVE_AGEOUT_TIME,
4613         /*
4614          * Host SWBA interval (time in msec before tbtt for SWBA event
4615          * generation).
4616          */
4617         WMI_VDEV_HOST_SWBA_INTERVAL,
4618         /* DTIM period (specified in units of num beacon intervals) */
4619         WMI_VDEV_PARAM_DTIM_PERIOD,
4620         /*
4621          * scheduler air time limit for this VDEV. used by off chan
4622          * scheduler.
4623          */
4624         WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4625         /* enable/dsiable WDS for this VDEV  */
4626         WMI_VDEV_PARAM_WDS,
4627         /* ATIM Window */
4628         WMI_VDEV_PARAM_ATIM_WINDOW,
4629         /* BMISS max */
4630         WMI_VDEV_PARAM_BMISS_COUNT_MAX,
4631         /* BMISS first time */
4632         WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
4633         /* BMISS final time */
4634         WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
4635         /* WMM enables/disabled */
4636         WMI_VDEV_PARAM_FEATURE_WMM,
4637         /* Channel width */
4638         WMI_VDEV_PARAM_CHWIDTH,
4639         /* Channel Offset */
4640         WMI_VDEV_PARAM_CHEXTOFFSET,
4641         /* Disable HT Protection */
4642         WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
4643         /* Quick STA Kickout */
4644         WMI_VDEV_PARAM_STA_QUICKKICKOUT,
4645         /* Rate to be used with Management frames */
4646         WMI_VDEV_PARAM_MGMT_RATE,
4647         /* Protection Mode */
4648         WMI_VDEV_PARAM_PROTECTION_MODE,
4649         /* Fixed rate setting */
4650         WMI_VDEV_PARAM_FIXED_RATE,
4651         /* Short GI Enable/Disable */
4652         WMI_VDEV_PARAM_SGI,
4653         /* Enable LDPC */
4654         WMI_VDEV_PARAM_LDPC,
4655         /* Enable Tx STBC */
4656         WMI_VDEV_PARAM_TX_STBC,
4657         /* Enable Rx STBC */
4658         WMI_VDEV_PARAM_RX_STBC,
4659         /* Intra BSS forwarding  */
4660         WMI_VDEV_PARAM_INTRA_BSS_FWD,
4661         /* Setting Default xmit key for Vdev */
4662         WMI_VDEV_PARAM_DEF_KEYID,
4663         /* NSS width */
4664         WMI_VDEV_PARAM_NSS,
4665         /* Set the custom rate for the broadcast data frames */
4666         WMI_VDEV_PARAM_BCAST_DATA_RATE,
4667         /* Set the custom rate (rate-code) for multicast data frames */
4668         WMI_VDEV_PARAM_MCAST_DATA_RATE,
4669         /* Tx multicast packet indicate Enable/Disable */
4670         WMI_VDEV_PARAM_MCAST_INDICATE,
4671         /* Tx DHCP packet indicate Enable/Disable */
4672         WMI_VDEV_PARAM_DHCP_INDICATE,
4673         /* Enable host inspection of Tx unicast packet to unknown destination */
4674         WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4675
4676         /* The minimum amount of time AP begins to consider STA inactive */
4677         WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4678
4679         /*
4680          * An associated STA is considered inactive when there is no recent
4681          * TX/RX activity and no downlink frames are buffered for it. Once a
4682          * STA exceeds the maximum idle inactive time, the AP will send an
4683          * 802.11 data-null as a keep alive to verify the STA is still
4684          * associated. If the STA does ACK the data-null, or if the data-null
4685          * is buffered and the STA does not retrieve it, the STA will be
4686          * considered unresponsive
4687          * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4688          */
4689         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4690
4691         /*
4692          * An associated STA is considered unresponsive if there is no recent
4693          * TX/RX activity and downlink frames are buffered for it. Once a STA
4694          * exceeds the maximum unresponsive time, the AP will send a
4695          * WMI_STA_KICKOUT event to the host so the STA can be deleted. */
4696         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4697
4698         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4699         WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
4700         /* Enable/Disable RTS-CTS */
4701         WMI_VDEV_PARAM_ENABLE_RTSCTS,
4702         /* Enable TXBFee/er */
4703         WMI_VDEV_PARAM_TXBF,
4704
4705         /* Set packet power save */
4706         WMI_VDEV_PARAM_PACKET_POWERSAVE,
4707
4708         /*
4709          * Drops un-encrypted packets if eceived in an encrypted connection
4710          * otherwise forwards to host.
4711          */
4712         WMI_VDEV_PARAM_DROP_UNENCRY,
4713
4714         /*
4715          * Set the encapsulation type for frames.
4716          */
4717         WMI_VDEV_PARAM_TX_ENCAP_TYPE,
4718 };
4719
4720 /* the definition of different VDEV parameters */
4721 enum wmi_10x_vdev_param {
4722         /* RTS Threshold */
4723         WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4724         /* Fragmentation threshold */
4725         WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4726         /* beacon interval in TUs */
4727         WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
4728         /* Listen interval in TUs */
4729         WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
4730         /* muticast rate in Mbps */
4731         WMI_10X_VDEV_PARAM_MULTICAST_RATE,
4732         /* management frame rate in Mbps */
4733         WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
4734         /* slot time (long vs short) */
4735         WMI_10X_VDEV_PARAM_SLOT_TIME,
4736         /* preamble (long vs short) */
4737         WMI_10X_VDEV_PARAM_PREAMBLE,
4738         /* SWBA time (time before tbtt in msec) */
4739         WMI_10X_VDEV_PARAM_SWBA_TIME,
4740         /* time period for updating VDEV stats */
4741         WMI_10X_VDEV_STATS_UPDATE_PERIOD,
4742         /* age out time in msec for frames queued for station in power save */
4743         WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
4744         /*
4745          * Host SWBA interval (time in msec before tbtt for SWBA event
4746          * generation).
4747          */
4748         WMI_10X_VDEV_HOST_SWBA_INTERVAL,
4749         /* DTIM period (specified in units of num beacon intervals) */
4750         WMI_10X_VDEV_PARAM_DTIM_PERIOD,
4751         /*
4752          * scheduler air time limit for this VDEV. used by off chan
4753          * scheduler.
4754          */
4755         WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4756         /* enable/dsiable WDS for this VDEV  */
4757         WMI_10X_VDEV_PARAM_WDS,
4758         /* ATIM Window */
4759         WMI_10X_VDEV_PARAM_ATIM_WINDOW,
4760         /* BMISS max */
4761         WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
4762         /* WMM enables/disabled */
4763         WMI_10X_VDEV_PARAM_FEATURE_WMM,
4764         /* Channel width */
4765         WMI_10X_VDEV_PARAM_CHWIDTH,
4766         /* Channel Offset */
4767         WMI_10X_VDEV_PARAM_CHEXTOFFSET,
4768         /* Disable HT Protection */
4769         WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
4770         /* Quick STA Kickout */
4771         WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
4772         /* Rate to be used with Management frames */
4773         WMI_10X_VDEV_PARAM_MGMT_RATE,
4774         /* Protection Mode */
4775         WMI_10X_VDEV_PARAM_PROTECTION_MODE,
4776         /* Fixed rate setting */
4777         WMI_10X_VDEV_PARAM_FIXED_RATE,
4778         /* Short GI Enable/Disable */
4779         WMI_10X_VDEV_PARAM_SGI,
4780         /* Enable LDPC */
4781         WMI_10X_VDEV_PARAM_LDPC,
4782         /* Enable Tx STBC */
4783         WMI_10X_VDEV_PARAM_TX_STBC,
4784         /* Enable Rx STBC */
4785         WMI_10X_VDEV_PARAM_RX_STBC,
4786         /* Intra BSS forwarding  */
4787         WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
4788         /* Setting Default xmit key for Vdev */
4789         WMI_10X_VDEV_PARAM_DEF_KEYID,
4790         /* NSS width */
4791         WMI_10X_VDEV_PARAM_NSS,
4792         /* Set the custom rate for the broadcast data frames */
4793         WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
4794         /* Set the custom rate (rate-code) for multicast data frames */
4795         WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
4796         /* Tx multicast packet indicate Enable/Disable */
4797         WMI_10X_VDEV_PARAM_MCAST_INDICATE,
4798         /* Tx DHCP packet indicate Enable/Disable */
4799         WMI_10X_VDEV_PARAM_DHCP_INDICATE,
4800         /* Enable host inspection of Tx unicast packet to unknown destination */
4801         WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4802
4803         /* The minimum amount of time AP begins to consider STA inactive */
4804         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4805
4806         /*
4807          * An associated STA is considered inactive when there is no recent
4808          * TX/RX activity and no downlink frames are buffered for it. Once a
4809          * STA exceeds the maximum idle inactive time, the AP will send an
4810          * 802.11 data-null as a keep alive to verify the STA is still
4811          * associated. If the STA does ACK the data-null, or if the data-null
4812          * is buffered and the STA does not retrieve it, the STA will be
4813          * considered unresponsive
4814          * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4815          */
4816         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4817
4818         /*
4819          * An associated STA is considered unresponsive if there is no recent
4820          * TX/RX activity and downlink frames are buffered for it. Once a STA
4821          * exceeds the maximum unresponsive time, the AP will send a
4822          * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */
4823         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4824
4825         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4826         WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
4827
4828         WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
4829         /* Enable/Disable RTS-CTS */
4830         WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
4831
4832         WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4833
4834         /* following are available as of firmware 10.2 */
4835         WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
4836         WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
4837         WMI_10X_VDEV_PARAM_MFPTEST_SET,
4838         WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
4839         WMI_10X_VDEV_PARAM_VHT_SGIMASK,
4840         WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
4841 };
4842
4843 enum wmi_10_4_vdev_param {
4844         WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
4845         WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4846         WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
4847         WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
4848         WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
4849         WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
4850         WMI_10_4_VDEV_PARAM_SLOT_TIME,
4851         WMI_10_4_VDEV_PARAM_PREAMBLE,
4852         WMI_10_4_VDEV_PARAM_SWBA_TIME,
4853         WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
4854         WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
4855         WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
4856         WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
4857         WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4858         WMI_10_4_VDEV_PARAM_WDS,
4859         WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
4860         WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
4861         WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
4862         WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
4863         WMI_10_4_VDEV_PARAM_FEATURE_WMM,
4864         WMI_10_4_VDEV_PARAM_CHWIDTH,
4865         WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
4866         WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
4867         WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
4868         WMI_10_4_VDEV_PARAM_MGMT_RATE,
4869         WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
4870         WMI_10_4_VDEV_PARAM_FIXED_RATE,
4871         WMI_10_4_VDEV_PARAM_SGI,
4872         WMI_10_4_VDEV_PARAM_LDPC,
4873         WMI_10_4_VDEV_PARAM_TX_STBC,
4874         WMI_10_4_VDEV_PARAM_RX_STBC,
4875         WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
4876         WMI_10_4_VDEV_PARAM_DEF_KEYID,
4877         WMI_10_4_VDEV_PARAM_NSS,
4878         WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
4879         WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
4880         WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
4881         WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
4882         WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4883         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4884         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4885         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4886         WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
4887         WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
4888         WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
4889         WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
4890         WMI_10_4_VDEV_PARAM_TXBF,
4891         WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
4892         WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
4893         WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
4894         WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4895         WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
4896         WMI_10_4_VDEV_PARAM_MFPTEST_SET,
4897         WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
4898         WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
4899         WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
4900         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
4901         WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
4902         WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
4903         WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
4904         WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
4905         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
4906         WMI_10_4_VDEV_PARAM_PROXY_STA,
4907         WMI_10_4_VDEV_PARAM_MERU_VC,
4908         WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
4909         WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
4910 };
4911
4912 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
4913 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
4914 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
4915 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
4916
4917 #define WMI_TXBF_STS_CAP_OFFSET_LSB     4
4918 #define WMI_TXBF_STS_CAP_OFFSET_MASK    0xf0
4919 #define WMI_BF_SOUND_DIM_OFFSET_LSB     8
4920 #define WMI_BF_SOUND_DIM_OFFSET_MASK    0xf00
4921
4922 /* slot time long */
4923 #define WMI_VDEV_SLOT_TIME_LONG         0x1
4924 /* slot time short */
4925 #define WMI_VDEV_SLOT_TIME_SHORT        0x2
4926 /* preablbe long */
4927 #define WMI_VDEV_PREAMBLE_LONG          0x1
4928 /* preablbe short */
4929 #define WMI_VDEV_PREAMBLE_SHORT         0x2
4930
4931 enum wmi_start_event_param {
4932         WMI_VDEV_RESP_START_EVENT = 0,
4933         WMI_VDEV_RESP_RESTART_EVENT,
4934 };
4935
4936 struct wmi_vdev_start_response_event {
4937         __le32 vdev_id;
4938         __le32 req_id;
4939         __le32 resp_type; /* %WMI_VDEV_RESP_ */
4940         __le32 status;
4941 } __packed;
4942
4943 struct wmi_vdev_standby_req_event {
4944         /* unique id identifying the VDEV, generated by the caller */
4945         __le32 vdev_id;
4946 } __packed;
4947
4948 struct wmi_vdev_resume_req_event {
4949         /* unique id identifying the VDEV, generated by the caller */
4950         __le32 vdev_id;
4951 } __packed;
4952
4953 struct wmi_vdev_stopped_event {
4954         /* unique id identifying the VDEV, generated by the caller */
4955         __le32 vdev_id;
4956 } __packed;
4957
4958 /*
4959  * common structure used for simple events
4960  * (stopped, resume_req, standby response)
4961  */
4962 struct wmi_vdev_simple_event {
4963         /* unique id identifying the VDEV, generated by the caller */
4964         __le32 vdev_id;
4965 } __packed;
4966
4967 /* VDEV start response status codes */
4968 /* VDEV succesfully started */
4969 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS  0x0
4970
4971 /* requested VDEV not found */
4972 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID  0x1
4973
4974 /* unsupported VDEV combination */
4975 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED   0x2
4976
4977 /* TODO: please add more comments if you have in-depth information */
4978 struct wmi_vdev_spectral_conf_cmd {
4979         __le32 vdev_id;
4980
4981         /* number of fft samples to send (0 for infinite) */
4982         __le32 scan_count;
4983         __le32 scan_period;
4984         __le32 scan_priority;
4985
4986         /* number of bins in the FFT: 2^(fft_size - bin_scale) */
4987         __le32 scan_fft_size;
4988         __le32 scan_gc_ena;
4989         __le32 scan_restart_ena;
4990         __le32 scan_noise_floor_ref;
4991         __le32 scan_init_delay;
4992         __le32 scan_nb_tone_thr;
4993         __le32 scan_str_bin_thr;
4994         __le32 scan_wb_rpt_mode;
4995         __le32 scan_rssi_rpt_mode;
4996         __le32 scan_rssi_thr;
4997         __le32 scan_pwr_format;
4998
4999         /* rpt_mode: Format of FFT report to software for spectral scan
5000          * triggered FFTs:
5001          *      0: No FFT report (only spectral scan summary report)
5002          *      1: 2-dword summary of metrics for each completed FFT + spectral
5003          *         scan summary report
5004          *      2: 2-dword summary of metrics for each completed FFT +
5005          *         1x- oversampled bins(in-band) per FFT + spectral scan summary
5006          *         report
5007          *      3: 2-dword summary of metrics for each completed FFT +
5008          *         2x- oversampled bins (all) per FFT + spectral scan summary
5009          */
5010         __le32 scan_rpt_mode;
5011         __le32 scan_bin_scale;
5012         __le32 scan_dbm_adj;
5013         __le32 scan_chn_mask;
5014 } __packed;
5015
5016 struct wmi_vdev_spectral_conf_arg {
5017         u32 vdev_id;
5018         u32 scan_count;
5019         u32 scan_period;
5020         u32 scan_priority;
5021         u32 scan_fft_size;
5022         u32 scan_gc_ena;
5023         u32 scan_restart_ena;
5024         u32 scan_noise_floor_ref;
5025         u32 scan_init_delay;
5026         u32 scan_nb_tone_thr;
5027         u32 scan_str_bin_thr;
5028         u32 scan_wb_rpt_mode;
5029         u32 scan_rssi_rpt_mode;
5030         u32 scan_rssi_thr;
5031         u32 scan_pwr_format;
5032         u32 scan_rpt_mode;
5033         u32 scan_bin_scale;
5034         u32 scan_dbm_adj;
5035         u32 scan_chn_mask;
5036 };
5037
5038 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
5039 #define WMI_SPECTRAL_COUNT_DEFAULT               0
5040 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
5041 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
5042 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
5043 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
5044 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
5045 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
5046 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
5047 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
5048 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
5049 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
5050 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
5051 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
5052 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
5053 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
5054 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
5055 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
5056 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
5057
5058 struct wmi_vdev_spectral_enable_cmd {
5059         __le32 vdev_id;
5060         __le32 trigger_cmd;
5061         __le32 enable_cmd;
5062 } __packed;
5063
5064 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
5065 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
5066 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
5067 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
5068
5069 /* Beacon processing related command and event structures */
5070 struct wmi_bcn_tx_hdr {
5071         __le32 vdev_id;
5072         __le32 tx_rate;
5073         __le32 tx_power;
5074         __le32 bcn_len;
5075 } __packed;
5076
5077 struct wmi_bcn_tx_cmd {
5078         struct wmi_bcn_tx_hdr hdr;
5079         u8 *bcn[0];
5080 } __packed;
5081
5082 struct wmi_bcn_tx_arg {
5083         u32 vdev_id;
5084         u32 tx_rate;
5085         u32 tx_power;
5086         u32 bcn_len;
5087         const void *bcn;
5088 };
5089
5090 enum wmi_bcn_tx_ref_flags {
5091         WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5092         WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5093 };
5094
5095 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5096  * chainmask yields no beacons on the air at all.
5097  */
5098 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5099
5100 struct wmi_bcn_tx_ref_cmd {
5101         __le32 vdev_id;
5102         __le32 data_len;
5103         /* physical address of the frame - dma pointer */
5104         __le32 data_ptr;
5105         /* id for host to track */
5106         __le32 msdu_id;
5107         /* frame ctrl to setup PPDU desc */
5108         __le32 frame_control;
5109         /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5110         __le32 flags;
5111         /* introduced in 10.2 */
5112         __le32 antenna_mask;
5113 } __packed;
5114
5115 /* Beacon filter */
5116 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5117 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5118 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5119 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5120 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5121
5122 struct wmi_bcn_filter_rx_cmd {
5123         /* Filter ID */
5124         __le32 bcn_filter_id;
5125         /* Filter type - wmi_bcn_filter */
5126         __le32 bcn_filter;
5127         /* Buffer len */
5128         __le32 bcn_filter_len;
5129         /* Filter info (threshold, BSSID, RSSI) */
5130         u8 *bcn_filter_buf;
5131 } __packed;
5132
5133 /* Capabilities and IEs to be passed to firmware */
5134 struct wmi_bcn_prb_info {
5135         /* Capabilities */
5136         __le32 caps;
5137         /* ERP info */
5138         __le32 erp;
5139         /* Advanced capabilities */
5140         /* HT capabilities */
5141         /* HT Info */
5142         /* ibss_dfs */
5143         /* wpa Info */
5144         /* rsn Info */
5145         /* rrm info */
5146         /* ath_ext */
5147         /* app IE */
5148 } __packed;
5149
5150 struct wmi_bcn_tmpl_cmd {
5151         /* unique id identifying the VDEV, generated by the caller */
5152         __le32 vdev_id;
5153         /* TIM IE offset from the beginning of the template. */
5154         __le32 tim_ie_offset;
5155         /* beacon probe capabilities and IEs */
5156         struct wmi_bcn_prb_info bcn_prb_info;
5157         /* beacon buffer length */
5158         __le32 buf_len;
5159         /* variable length data */
5160         u8 data[1];
5161 } __packed;
5162
5163 struct wmi_prb_tmpl_cmd {
5164         /* unique id identifying the VDEV, generated by the caller */
5165         __le32 vdev_id;
5166         /* beacon probe capabilities and IEs */
5167         struct wmi_bcn_prb_info bcn_prb_info;
5168         /* beacon buffer length */
5169         __le32 buf_len;
5170         /* Variable length data */
5171         u8 data[1];
5172 } __packed;
5173
5174 enum wmi_sta_ps_mode {
5175         /* enable power save for the given STA VDEV */
5176         WMI_STA_PS_MODE_DISABLED = 0,
5177         /* disable power save  for a given STA VDEV */
5178         WMI_STA_PS_MODE_ENABLED = 1,
5179 };
5180
5181 struct wmi_sta_powersave_mode_cmd {
5182         /* unique id identifying the VDEV, generated by the caller */
5183         __le32 vdev_id;
5184
5185         /*
5186          * Power save mode
5187          * (see enum wmi_sta_ps_mode)
5188          */
5189         __le32 sta_ps_mode;
5190 } __packed;
5191
5192 enum wmi_csa_offload_en {
5193         WMI_CSA_OFFLOAD_DISABLE = 0,
5194         WMI_CSA_OFFLOAD_ENABLE = 1,
5195 };
5196
5197 struct wmi_csa_offload_enable_cmd {
5198         __le32 vdev_id;
5199         __le32 csa_offload_enable;
5200 } __packed;
5201
5202 struct wmi_csa_offload_chanswitch_cmd {
5203         __le32 vdev_id;
5204         struct wmi_channel chan;
5205 } __packed;
5206
5207 /*
5208  * This parameter controls the policy for retrieving frames from AP while the
5209  * STA is in sleep state.
5210  *
5211  * Only takes affect if the sta_ps_mode is enabled
5212  */
5213 enum wmi_sta_ps_param_rx_wake_policy {
5214         /*
5215          * Wake up when ever there is an  RX activity on the VDEV. In this mode
5216          * the Power save SM(state machine) will come out of sleep by either
5217          * sending null frame (or) a data frame (with PS==0) in response to TIM
5218          * bit set in the received beacon frame from AP.
5219          */
5220         WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5221
5222         /*
5223          * Here the power save state machine will not wakeup in response to TIM
5224          * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5225          * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5226          * access categories are delivery-enabled, the station will send a
5227          * UAPSD trigger frame, otherwise it will send a PS-Poll.
5228          */
5229         WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5230 };
5231
5232 /*
5233  * Number of tx frames/beacon  that cause the power save SM to wake up.
5234  *
5235  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5236  * meaning, It will cause the SM to never wake up. This is useful if you want
5237  * to keep the system to sleep all the time for some kind of test mode . host
5238  * can change this parameter any time.  It will affect at the next tx frame.
5239  */
5240 enum wmi_sta_ps_param_tx_wake_threshold {
5241         WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5242         WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5243
5244         /*
5245          * Values greater than one indicate that many TX attempts per beacon
5246          * interval before the STA will wake up
5247          */
5248 };
5249
5250 /*
5251  * The maximum number of PS-Poll frames the FW will send in response to
5252  * traffic advertised in TIM before waking up (by sending a null frame with PS
5253  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5254  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5255  * parameter is used when the RX wake policy is
5256  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5257  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5258  */
5259 enum wmi_sta_ps_param_pspoll_count {
5260         WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5261         /*
5262          * Values greater than 0 indicate the maximum numer of PS-Poll frames
5263          * FW will send before waking up.
5264          */
5265
5266         /* When u-APSD is enabled the firmware will be very reluctant to exit
5267          * STA PS. This could result in very poor Rx performance with STA doing
5268          * PS-Poll for each and every buffered frame. This value is a bit
5269          * arbitrary.
5270          */
5271         WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5272 };
5273
5274 /*
5275  * This will include the delivery and trigger enabled state for every AC.
5276  * This is the negotiated state with AP. The host MLME needs to set this based
5277  * on AP capability and the state Set in the association request by the
5278  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5279  */
5280 #define WMI_UAPSD_AC_TYPE_DELI 0
5281 #define WMI_UAPSD_AC_TYPE_TRIG 1
5282
5283 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5284         ((type ==  WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1)))
5285
5286 enum wmi_sta_ps_param_uapsd {
5287         WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5288         WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5289         WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5290         WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5291         WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5292         WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5293         WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5294         WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5295 };
5296
5297 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5298
5299 struct wmi_sta_uapsd_auto_trig_param {
5300         __le32 wmm_ac;
5301         __le32 user_priority;
5302         __le32 service_interval;
5303         __le32 suspend_interval;
5304         __le32 delay_interval;
5305 };
5306
5307 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5308         __le32 vdev_id;
5309         struct wmi_mac_addr peer_macaddr;
5310         __le32 num_ac;
5311 };
5312
5313 struct wmi_sta_uapsd_auto_trig_arg {
5314         u32 wmm_ac;
5315         u32 user_priority;
5316         u32 service_interval;
5317         u32 suspend_interval;
5318         u32 delay_interval;
5319 };
5320
5321 enum wmi_sta_powersave_param {
5322         /*
5323          * Controls how frames are retrievd from AP while STA is sleeping
5324          *
5325          * (see enum wmi_sta_ps_param_rx_wake_policy)
5326          */
5327         WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5328
5329         /*
5330          * The STA will go active after this many TX
5331          *
5332          * (see enum wmi_sta_ps_param_tx_wake_threshold)
5333          */
5334         WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5335
5336         /*
5337          * Number of PS-Poll to send before STA wakes up
5338          *
5339          * (see enum wmi_sta_ps_param_pspoll_count)
5340          *
5341          */
5342         WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5343
5344         /*
5345          * TX/RX inactivity time in msec before going to sleep.
5346          *
5347          * The power save SM will monitor tx/rx activity on the VDEV, if no
5348          * activity for the specified msec of the parameter the Power save
5349          * SM will go to sleep.
5350          */
5351         WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5352
5353         /*
5354          * Set uapsd configuration.
5355          *
5356          * (see enum wmi_sta_ps_param_uapsd)
5357          */
5358         WMI_STA_PS_PARAM_UAPSD = 4,
5359 };
5360
5361 struct wmi_sta_powersave_param_cmd {
5362         __le32 vdev_id;
5363         __le32 param_id; /* %WMI_STA_PS_PARAM_ */
5364         __le32 param_value;
5365 } __packed;
5366
5367 /* No MIMO power save */
5368 #define WMI_STA_MIMO_PS_MODE_DISABLE
5369 /* mimo powersave mode static*/
5370 #define WMI_STA_MIMO_PS_MODE_STATIC
5371 /* mimo powersave mode dynamic */
5372 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
5373
5374 struct wmi_sta_mimo_ps_mode_cmd {
5375         /* unique id identifying the VDEV, generated by the caller */
5376         __le32 vdev_id;
5377         /* mimo powersave mode as defined above */
5378         __le32 mimo_pwrsave_mode;
5379 } __packed;
5380
5381 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
5382 enum wmi_ap_ps_param_uapsd {
5383         WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5384         WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5385         WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5386         WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5387         WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5388         WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5389         WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5390         WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5391 };
5392
5393 /* U-APSD maximum service period of peer station */
5394 enum wmi_ap_ps_peer_param_max_sp {
5395         WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
5396         WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
5397         WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
5398         WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
5399         MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
5400 };
5401
5402 /*
5403  * AP power save parameter
5404  * Set a power save specific parameter for a peer station
5405  */
5406 enum wmi_ap_ps_peer_param {
5407         /* Set uapsd configuration for a given peer.
5408          *
5409          * Include the delivery and trigger enabled state for every AC.
5410          * The host  MLME needs to set this based on AP capability and stations
5411          * request Set in the association request  received from the station.
5412          *
5413          * Lower 8 bits of the value specify the UAPSD configuration.
5414          *
5415          * (see enum wmi_ap_ps_param_uapsd)
5416          * The default value is 0.
5417          */
5418         WMI_AP_PS_PEER_PARAM_UAPSD = 0,
5419
5420         /*
5421          * Set the service period for a UAPSD capable station
5422          *
5423          * The service period from wme ie in the (re)assoc request frame.
5424          *
5425          * (see enum wmi_ap_ps_peer_param_max_sp)
5426          */
5427         WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
5428
5429         /* Time in seconds for aging out buffered frames for STA in PS */
5430         WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
5431 };
5432
5433 struct wmi_ap_ps_peer_cmd {
5434         /* unique id identifying the VDEV, generated by the caller */
5435         __le32 vdev_id;
5436
5437         /* peer MAC address */
5438         struct wmi_mac_addr peer_macaddr;
5439
5440         /* AP powersave param (see enum wmi_ap_ps_peer_param) */
5441         __le32 param_id;
5442
5443         /* AP powersave param value */
5444         __le32 param_value;
5445 } __packed;
5446
5447 /* 128 clients = 4 words */
5448 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
5449
5450 struct wmi_tim_info {
5451         __le32 tim_len;
5452         __le32 tim_mcast;
5453         __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
5454         __le32 tim_changed;
5455         __le32 tim_num_ps_pending;
5456 } __packed;
5457
5458 struct wmi_tim_info_arg {
5459         __le32 tim_len;
5460         __le32 tim_mcast;
5461         const __le32 *tim_bitmap;
5462         __le32 tim_changed;
5463         __le32 tim_num_ps_pending;
5464 } __packed;
5465
5466 /* Maximum number of NOA Descriptors supported */
5467 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
5468 #define WMI_P2P_OPPPS_ENABLE_BIT        BIT(0)
5469 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET   1
5470 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
5471
5472 struct wmi_p2p_noa_info {
5473         /* Bit 0 - Flag to indicate an update in NOA schedule
5474            Bits 7-1 - Reserved */
5475         u8 changed;
5476         /* NOA index */
5477         u8 index;
5478         /* Bit 0 - Opp PS state of the AP
5479            Bits 1-7 - Ctwindow in TUs */
5480         u8 ctwindow_oppps;
5481         /* Number of NOA descriptors */
5482         u8 num_descriptors;
5483
5484         struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
5485 } __packed;
5486
5487 struct wmi_bcn_info {
5488         struct wmi_tim_info tim_info;
5489         struct wmi_p2p_noa_info p2p_noa_info;
5490 } __packed;
5491
5492 struct wmi_host_swba_event {
5493         __le32 vdev_map;
5494         struct wmi_bcn_info bcn_info[0];
5495 } __packed;
5496
5497 struct wmi_10_2_4_bcn_info {
5498         struct wmi_tim_info tim_info;
5499         /* The 10.2.4 FW doesn't have p2p NOA info */
5500 } __packed;
5501
5502 struct wmi_10_2_4_host_swba_event {
5503         __le32 vdev_map;
5504         struct wmi_10_2_4_bcn_info bcn_info[0];
5505 } __packed;
5506
5507 /* 16 words = 512 client + 1 word = for guard */
5508 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
5509
5510 struct wmi_10_4_tim_info {
5511         __le32 tim_len;
5512         __le32 tim_mcast;
5513         __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
5514         __le32 tim_changed;
5515         __le32 tim_num_ps_pending;
5516 } __packed;
5517
5518 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
5519
5520 struct wmi_10_4_p2p_noa_info {
5521         /* Bit 0 - Flag to indicate an update in NOA schedule
5522          * Bits 7-1 - Reserved
5523          */
5524         u8 changed;
5525         /* NOA index */
5526         u8 index;
5527         /* Bit 0 - Opp PS state of the AP
5528          * Bits 1-7 - Ctwindow in TUs
5529          */
5530         u8 ctwindow_oppps;
5531         /* Number of NOA descriptors */
5532         u8 num_descriptors;
5533
5534         struct wmi_p2p_noa_descriptor
5535                 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
5536 } __packed;
5537
5538 struct wmi_10_4_bcn_info {
5539         struct wmi_10_4_tim_info tim_info;
5540         struct wmi_10_4_p2p_noa_info p2p_noa_info;
5541 } __packed;
5542
5543 struct wmi_10_4_host_swba_event {
5544         __le32 vdev_map;
5545         struct wmi_10_4_bcn_info bcn_info[0];
5546 } __packed;
5547
5548 #define WMI_MAX_AP_VDEV 16
5549
5550 struct wmi_tbtt_offset_event {
5551         __le32 vdev_map;
5552         __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
5553 } __packed;
5554
5555 struct wmi_peer_create_cmd {
5556         __le32 vdev_id;
5557         struct wmi_mac_addr peer_macaddr;
5558 } __packed;
5559
5560 enum wmi_peer_type {
5561         WMI_PEER_TYPE_DEFAULT = 0,
5562         WMI_PEER_TYPE_BSS = 1,
5563         WMI_PEER_TYPE_TDLS = 2,
5564 };
5565
5566 struct wmi_peer_delete_cmd {
5567         __le32 vdev_id;
5568         struct wmi_mac_addr peer_macaddr;
5569 } __packed;
5570
5571 struct wmi_peer_flush_tids_cmd {
5572         __le32 vdev_id;
5573         struct wmi_mac_addr peer_macaddr;
5574         __le32 peer_tid_bitmap;
5575 } __packed;
5576
5577 struct wmi_fixed_rate {
5578         /*
5579          * rate mode . 0: disable fixed rate (auto rate)
5580          *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
5581          *   2: ht20 11n rate  specified as mcs index
5582          *   3: ht40 11n rate  specified as mcs index
5583          */
5584         __le32  rate_mode;
5585         /*
5586          * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
5587          * and series 3 is stored at byte 3 (MSB)
5588          */
5589         __le32  rate_series;
5590         /*
5591          * 4 retry counts for 4 rate series. retry count for rate 0 is stored
5592          * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
5593          * (MSB)
5594          */
5595         __le32  rate_retries;
5596 } __packed;
5597
5598 struct wmi_peer_fixed_rate_cmd {
5599         /* unique id identifying the VDEV, generated by the caller */
5600         __le32 vdev_id;
5601         /* peer MAC address */
5602         struct wmi_mac_addr peer_macaddr;
5603         /* fixed rate */
5604         struct wmi_fixed_rate peer_fixed_rate;
5605 } __packed;
5606
5607 #define WMI_MGMT_TID    17
5608
5609 struct wmi_addba_clear_resp_cmd {
5610         /* unique id identifying the VDEV, generated by the caller */
5611         __le32 vdev_id;
5612         /* peer MAC address */
5613         struct wmi_mac_addr peer_macaddr;
5614 } __packed;
5615
5616 struct wmi_addba_send_cmd {
5617         /* unique id identifying the VDEV, generated by the caller */
5618         __le32 vdev_id;
5619         /* peer MAC address */
5620         struct wmi_mac_addr peer_macaddr;
5621         /* Tid number */
5622         __le32 tid;
5623         /* Buffer/Window size*/
5624         __le32 buffersize;
5625 } __packed;
5626
5627 struct wmi_delba_send_cmd {
5628         /* unique id identifying the VDEV, generated by the caller */
5629         __le32 vdev_id;
5630         /* peer MAC address */
5631         struct wmi_mac_addr peer_macaddr;
5632         /* Tid number */
5633         __le32 tid;
5634         /* Is Initiator */
5635         __le32 initiator;
5636         /* Reason code */
5637         __le32 reasoncode;
5638 } __packed;
5639
5640 struct wmi_addba_setresponse_cmd {
5641         /* unique id identifying the vdev, generated by the caller */
5642         __le32 vdev_id;
5643         /* peer mac address */
5644         struct wmi_mac_addr peer_macaddr;
5645         /* Tid number */
5646         __le32 tid;
5647         /* status code */
5648         __le32 statuscode;
5649 } __packed;
5650
5651 struct wmi_send_singleamsdu_cmd {
5652         /* unique id identifying the vdev, generated by the caller */
5653         __le32 vdev_id;
5654         /* peer mac address */
5655         struct wmi_mac_addr peer_macaddr;
5656         /* Tid number */
5657         __le32 tid;
5658 } __packed;
5659
5660 enum wmi_peer_smps_state {
5661         WMI_PEER_SMPS_PS_NONE = 0x0,
5662         WMI_PEER_SMPS_STATIC  = 0x1,
5663         WMI_PEER_SMPS_DYNAMIC = 0x2
5664 };
5665
5666 enum wmi_peer_chwidth {
5667         WMI_PEER_CHWIDTH_20MHZ = 0,
5668         WMI_PEER_CHWIDTH_40MHZ = 1,
5669         WMI_PEER_CHWIDTH_80MHZ = 2,
5670 };
5671
5672 enum wmi_peer_param {
5673         WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
5674         WMI_PEER_AMPDU      = 0x2,
5675         WMI_PEER_AUTHORIZE  = 0x3,
5676         WMI_PEER_CHAN_WIDTH = 0x4,
5677         WMI_PEER_NSS        = 0x5,
5678         WMI_PEER_USE_4ADDR  = 0x6,
5679         WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
5680 };
5681
5682 struct wmi_peer_set_param_cmd {
5683         __le32 vdev_id;
5684         struct wmi_mac_addr peer_macaddr;
5685         __le32 param_id;
5686         __le32 param_value;
5687 } __packed;
5688
5689 #define MAX_SUPPORTED_RATES 128
5690
5691 struct wmi_rate_set {
5692         /* total number of rates */
5693         __le32 num_rates;
5694         /*
5695          * rates (each 8bit value) packed into a 32 bit word.
5696          * the rates are filled from least significant byte to most
5697          * significant byte.
5698          */
5699         __le32 rates[(MAX_SUPPORTED_RATES/4)+1];
5700 } __packed;
5701
5702 struct wmi_rate_set_arg {
5703         unsigned int num_rates;
5704         u8 rates[MAX_SUPPORTED_RATES];
5705 };
5706
5707 /*
5708  * NOTE: It would bea good idea to represent the Tx MCS
5709  * info in one word and Rx in another word. This is split
5710  * into multiple words for convenience
5711  */
5712 struct wmi_vht_rate_set {
5713         __le32 rx_max_rate; /* Max Rx data rate */
5714         __le32 rx_mcs_set;  /* Negotiated RX VHT rates */
5715         __le32 tx_max_rate; /* Max Tx data rate */
5716         __le32 tx_mcs_set;  /* Negotiated TX VHT rates */
5717 } __packed;
5718
5719 struct wmi_vht_rate_set_arg {
5720         u32 rx_max_rate;
5721         u32 rx_mcs_set;
5722         u32 tx_max_rate;
5723         u32 tx_mcs_set;
5724 };
5725
5726 struct wmi_peer_set_rates_cmd {
5727         /* peer MAC address */
5728         struct wmi_mac_addr peer_macaddr;
5729         /* legacy rate set */
5730         struct wmi_rate_set peer_legacy_rates;
5731         /* ht rate set */
5732         struct wmi_rate_set peer_ht_rates;
5733 } __packed;
5734
5735 struct wmi_peer_set_q_empty_callback_cmd {
5736         /* unique id identifying the VDEV, generated by the caller */
5737         __le32 vdev_id;
5738         /* peer MAC address */
5739         struct wmi_mac_addr peer_macaddr;
5740         __le32 callback_enable;
5741 } __packed;
5742
5743 struct wmi_peer_flags_map {
5744         u32 auth;
5745         u32 qos;
5746         u32 need_ptk_4_way;
5747         u32 need_gtk_2_way;
5748         u32 apsd;
5749         u32 ht;
5750         u32 bw40;
5751         u32 stbc;
5752         u32 ldbc;
5753         u32 dyn_mimops;
5754         u32 static_mimops;
5755         u32 spatial_mux;
5756         u32 vht;
5757         u32 bw80;
5758         u32 vht_2g;
5759         u32 pmf;
5760 };
5761
5762 enum wmi_peer_flags {
5763         WMI_PEER_AUTH = 0x00000001,
5764         WMI_PEER_QOS = 0x00000002,
5765         WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
5766         WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
5767         WMI_PEER_APSD = 0x00000800,
5768         WMI_PEER_HT = 0x00001000,
5769         WMI_PEER_40MHZ = 0x00002000,
5770         WMI_PEER_STBC = 0x00008000,
5771         WMI_PEER_LDPC = 0x00010000,
5772         WMI_PEER_DYN_MIMOPS = 0x00020000,
5773         WMI_PEER_STATIC_MIMOPS = 0x00040000,
5774         WMI_PEER_SPATIAL_MUX = 0x00200000,
5775         WMI_PEER_VHT = 0x02000000,
5776         WMI_PEER_80MHZ = 0x04000000,
5777         WMI_PEER_VHT_2G = 0x08000000,
5778         WMI_PEER_PMF = 0x10000000,
5779 };
5780
5781 enum wmi_10x_peer_flags {
5782         WMI_10X_PEER_AUTH = 0x00000001,
5783         WMI_10X_PEER_QOS = 0x00000002,
5784         WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
5785         WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
5786         WMI_10X_PEER_APSD = 0x00000800,
5787         WMI_10X_PEER_HT = 0x00001000,
5788         WMI_10X_PEER_40MHZ = 0x00002000,
5789         WMI_10X_PEER_STBC = 0x00008000,
5790         WMI_10X_PEER_LDPC = 0x00010000,
5791         WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
5792         WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
5793         WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
5794         WMI_10X_PEER_VHT = 0x02000000,
5795         WMI_10X_PEER_80MHZ = 0x04000000,
5796 };
5797
5798 enum wmi_10_2_peer_flags {
5799         WMI_10_2_PEER_AUTH = 0x00000001,
5800         WMI_10_2_PEER_QOS = 0x00000002,
5801         WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
5802         WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
5803         WMI_10_2_PEER_APSD = 0x00000800,
5804         WMI_10_2_PEER_HT = 0x00001000,
5805         WMI_10_2_PEER_40MHZ = 0x00002000,
5806         WMI_10_2_PEER_STBC = 0x00008000,
5807         WMI_10_2_PEER_LDPC = 0x00010000,
5808         WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
5809         WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
5810         WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
5811         WMI_10_2_PEER_VHT = 0x02000000,
5812         WMI_10_2_PEER_80MHZ = 0x04000000,
5813         WMI_10_2_PEER_VHT_2G = 0x08000000,
5814         WMI_10_2_PEER_PMF = 0x10000000,
5815 };
5816
5817 /*
5818  * Peer rate capabilities.
5819  *
5820  * This is of interest to the ratecontrol
5821  * module which resides in the firmware. The bit definitions are
5822  * consistent with that defined in if_athrate.c.
5823  */
5824 #define WMI_RC_DS_FLAG          0x01
5825 #define WMI_RC_CW40_FLAG        0x02
5826 #define WMI_RC_SGI_FLAG         0x04
5827 #define WMI_RC_HT_FLAG          0x08
5828 #define WMI_RC_RTSCTS_FLAG      0x10
5829 #define WMI_RC_TX_STBC_FLAG     0x20
5830 #define WMI_RC_RX_STBC_FLAG     0xC0
5831 #define WMI_RC_RX_STBC_FLAG_S   6
5832 #define WMI_RC_WEP_TKIP_FLAG    0x100
5833 #define WMI_RC_TS_FLAG          0x200
5834 #define WMI_RC_UAPSD_FLAG       0x400
5835
5836 /* Maximum listen interval supported by hw in units of beacon interval */
5837 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
5838
5839 struct wmi_common_peer_assoc_complete_cmd {
5840         struct wmi_mac_addr peer_macaddr;
5841         __le32 vdev_id;
5842         __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
5843         __le32 peer_associd; /* 16 LSBs */
5844         __le32 peer_flags;
5845         __le32 peer_caps; /* 16 LSBs */
5846         __le32 peer_listen_intval;
5847         __le32 peer_ht_caps;
5848         __le32 peer_max_mpdu;
5849         __le32 peer_mpdu_density; /* 0..16 */
5850         __le32 peer_rate_caps;
5851         struct wmi_rate_set peer_legacy_rates;
5852         struct wmi_rate_set peer_ht_rates;
5853         __le32 peer_nss; /* num of spatial streams */
5854         __le32 peer_vht_caps;
5855         __le32 peer_phymode;
5856         struct wmi_vht_rate_set peer_vht_rates;
5857 };
5858
5859 struct wmi_main_peer_assoc_complete_cmd {
5860         struct wmi_common_peer_assoc_complete_cmd cmd;
5861
5862         /* HT Operation Element of the peer. Five bytes packed in 2
5863          *  INT32 array and filled from lsb to msb. */
5864         __le32 peer_ht_info[2];
5865 } __packed;
5866
5867 struct wmi_10_1_peer_assoc_complete_cmd {
5868         struct wmi_common_peer_assoc_complete_cmd cmd;
5869 } __packed;
5870
5871 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
5872 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
5873 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
5874 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
5875
5876 struct wmi_10_2_peer_assoc_complete_cmd {
5877         struct wmi_common_peer_assoc_complete_cmd cmd;
5878         __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
5879 } __packed;
5880
5881 struct wmi_10_4_peer_assoc_complete_cmd {
5882         struct wmi_10_2_peer_assoc_complete_cmd cmd;
5883         __le32 peer_bw_rxnss_override;
5884 } __packed;
5885
5886 struct wmi_peer_assoc_complete_arg {
5887         u8 addr[ETH_ALEN];
5888         u32 vdev_id;
5889         bool peer_reassoc;
5890         u16 peer_aid;
5891         u32 peer_flags; /* see %WMI_PEER_ */
5892         u16 peer_caps;
5893         u32 peer_listen_intval;
5894         u32 peer_ht_caps;
5895         u32 peer_max_mpdu;
5896         u32 peer_mpdu_density; /* 0..16 */
5897         u32 peer_rate_caps; /* see %WMI_RC_ */
5898         struct wmi_rate_set_arg peer_legacy_rates;
5899         struct wmi_rate_set_arg peer_ht_rates;
5900         u32 peer_num_spatial_streams;
5901         u32 peer_vht_caps;
5902         enum wmi_phy_mode peer_phymode;
5903         struct wmi_vht_rate_set_arg peer_vht_rates;
5904 };
5905
5906 struct wmi_peer_add_wds_entry_cmd {
5907         /* peer MAC address */
5908         struct wmi_mac_addr peer_macaddr;
5909         /* wds MAC addr */
5910         struct wmi_mac_addr wds_macaddr;
5911 } __packed;
5912
5913 struct wmi_peer_remove_wds_entry_cmd {
5914         /* wds MAC addr */
5915         struct wmi_mac_addr wds_macaddr;
5916 } __packed;
5917
5918 struct wmi_peer_q_empty_callback_event {
5919         /* peer MAC address */
5920         struct wmi_mac_addr peer_macaddr;
5921 } __packed;
5922
5923 /*
5924  * Channel info WMI event
5925  */
5926 struct wmi_chan_info_event {
5927         __le32 err_code;
5928         __le32 freq;
5929         __le32 cmd_flags;
5930         __le32 noise_floor;
5931         __le32 rx_clear_count;
5932         __le32 cycle_count;
5933 } __packed;
5934
5935 struct wmi_10_4_chan_info_event {
5936         __le32 err_code;
5937         __le32 freq;
5938         __le32 cmd_flags;
5939         __le32 noise_floor;
5940         __le32 rx_clear_count;
5941         __le32 cycle_count;
5942         __le32 chan_tx_pwr_range;
5943         __le32 chan_tx_pwr_tp;
5944         __le32 rx_frame_count;
5945 } __packed;
5946
5947 struct wmi_peer_sta_kickout_event {
5948         struct wmi_mac_addr peer_macaddr;
5949 } __packed;
5950
5951 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
5952 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
5953
5954 /* Beacon filter wmi command info */
5955 #define BCN_FLT_MAX_SUPPORTED_IES       256
5956 #define BCN_FLT_MAX_ELEMS_IE_LIST       (BCN_FLT_MAX_SUPPORTED_IES / 32)
5957
5958 struct bss_bcn_stats {
5959         __le32 vdev_id;
5960         __le32 bss_bcnsdropped;
5961         __le32 bss_bcnsdelivered;
5962 } __packed;
5963
5964 struct bcn_filter_stats {
5965         __le32 bcns_dropped;
5966         __le32 bcns_delivered;
5967         __le32 activefilters;
5968         struct bss_bcn_stats bss_stats;
5969 } __packed;
5970
5971 struct wmi_add_bcn_filter_cmd {
5972         u32 vdev_id;
5973         u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
5974 } __packed;
5975
5976 enum wmi_sta_keepalive_method {
5977         WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
5978         WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
5979 };
5980
5981 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
5982
5983 /* Firmware crashes if keepalive interval exceeds this limit */
5984 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
5985
5986 /* note: ip4 addresses are in network byte order, i.e. big endian */
5987 struct wmi_sta_keepalive_arp_resp {
5988         __be32 src_ip4_addr;
5989         __be32 dest_ip4_addr;
5990         struct wmi_mac_addr dest_mac_addr;
5991 } __packed;
5992
5993 struct wmi_sta_keepalive_cmd {
5994         __le32 vdev_id;
5995         __le32 enabled;
5996         __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
5997         __le32 interval; /* in seconds */
5998         struct wmi_sta_keepalive_arp_resp arp_resp;
5999 } __packed;
6000
6001 struct wmi_sta_keepalive_arg {
6002         u32 vdev_id;
6003         u32 enabled;
6004         u32 method;
6005         u32 interval;
6006         __be32 src_ip4_addr;
6007         __be32 dest_ip4_addr;
6008         const u8 dest_mac_addr[ETH_ALEN];
6009 };
6010
6011 enum wmi_force_fw_hang_type {
6012         WMI_FORCE_FW_HANG_ASSERT = 1,
6013         WMI_FORCE_FW_HANG_NO_DETECT,
6014         WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6015         WMI_FORCE_FW_HANG_EMPTY_POINT,
6016         WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6017         WMI_FORCE_FW_HANG_INFINITE_LOOP,
6018 };
6019
6020 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6021
6022 struct wmi_force_fw_hang_cmd {
6023         __le32 type;
6024         __le32 delay_ms;
6025 } __packed;
6026
6027 enum ath10k_dbglog_level {
6028         ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6029         ATH10K_DBGLOG_LEVEL_INFO = 1,
6030         ATH10K_DBGLOG_LEVEL_WARN = 2,
6031         ATH10K_DBGLOG_LEVEL_ERR = 3,
6032 };
6033
6034 /* VAP ids to enable dbglog */
6035 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB           0
6036 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK          0x0000ffff
6037
6038 /* to enable dbglog in the firmware */
6039 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB  16
6040 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6041
6042 /* timestamp resolution */
6043 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB        17
6044 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK       0x000E0000
6045
6046 /* number of queued messages before sending them to the host */
6047 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB       20
6048 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK      0x0ff00000
6049
6050 /*
6051  * Log levels to enable. This defines the minimum level to enable, this is
6052  * not a bitmask. See enum ath10k_dbglog_level for the values.
6053  */
6054 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB           28
6055 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK          0x70000000
6056
6057 /*
6058  * Note: this is a cleaned up version of a struct firmware uses. For
6059  * example, config_valid was hidden inside an array.
6060  */
6061 struct wmi_dbglog_cfg_cmd {
6062         /* bitmask to hold mod id config*/
6063         __le32 module_enable;
6064
6065         /* see ATH10K_DBGLOG_CFG_ */
6066         __le32 config_enable;
6067
6068         /* mask of module id bits to be changed */
6069         __le32 module_valid;
6070
6071         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6072         __le32 config_valid;
6073 } __packed;
6074
6075 enum wmi_roam_reason {
6076         WMI_ROAM_REASON_BETTER_AP = 1,
6077         WMI_ROAM_REASON_BEACON_MISS = 2,
6078         WMI_ROAM_REASON_LOW_RSSI = 3,
6079         WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6080         WMI_ROAM_REASON_HO_FAILED = 5,
6081
6082         /* keep last */
6083         WMI_ROAM_REASON_MAX,
6084 };
6085
6086 struct wmi_roam_ev {
6087         __le32 vdev_id;
6088         __le32 reason;
6089 } __packed;
6090
6091 #define ATH10K_FRAGMT_THRESHOLD_MIN     540
6092 #define ATH10K_FRAGMT_THRESHOLD_MAX     2346
6093
6094 #define WMI_MAX_EVENT 0x1000
6095 /* Maximum number of pending TXed WMI packets */
6096 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6097
6098 /* By default disable power save for IBSS */
6099 #define ATH10K_DEFAULT_ATIM 0
6100
6101 #define WMI_MAX_MEM_REQS 16
6102
6103 struct wmi_scan_ev_arg {
6104         __le32 event_type; /* %WMI_SCAN_EVENT_ */
6105         __le32 reason; /* %WMI_SCAN_REASON_ */
6106         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6107         __le32 scan_req_id;
6108         __le32 scan_id;
6109         __le32 vdev_id;
6110 };
6111
6112 struct wmi_mgmt_rx_ev_arg {
6113         __le32 channel;
6114         __le32 snr;
6115         __le32 rate;
6116         __le32 phy_mode;
6117         __le32 buf_len;
6118         __le32 status; /* %WMI_RX_STATUS_ */
6119 };
6120
6121 struct wmi_ch_info_ev_arg {
6122         __le32 err_code;
6123         __le32 freq;
6124         __le32 cmd_flags;
6125         __le32 noise_floor;
6126         __le32 rx_clear_count;
6127         __le32 cycle_count;
6128         __le32 chan_tx_pwr_range;
6129         __le32 chan_tx_pwr_tp;
6130         __le32 rx_frame_count;
6131 };
6132
6133 struct wmi_vdev_start_ev_arg {
6134         __le32 vdev_id;
6135         __le32 req_id;
6136         __le32 resp_type; /* %WMI_VDEV_RESP_ */
6137         __le32 status;
6138 };
6139
6140 struct wmi_peer_kick_ev_arg {
6141         const u8 *mac_addr;
6142 };
6143
6144 struct wmi_swba_ev_arg {
6145         __le32 vdev_map;
6146         struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6147         const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6148 };
6149
6150 struct wmi_phyerr_ev_arg {
6151         u32 tsf_timestamp;
6152         u16 freq1;
6153         u16 freq2;
6154         u8 rssi_combined;
6155         u8 chan_width_mhz;
6156         u8 phy_err_code;
6157         u16 nf_chains[4];
6158         u32 buf_len;
6159         const u8 *buf;
6160         u8 hdr_len;
6161 };
6162
6163 struct wmi_phyerr_hdr_arg {
6164         u32 num_phyerrs;
6165         u32 tsf_l32;
6166         u32 tsf_u32;
6167         u32 buf_len;
6168         const void *phyerrs;
6169 };
6170
6171 struct wmi_svc_rdy_ev_arg {
6172         __le32 min_tx_power;
6173         __le32 max_tx_power;
6174         __le32 ht_cap;
6175         __le32 vht_cap;
6176         __le32 sw_ver0;
6177         __le32 sw_ver1;
6178         __le32 fw_build;
6179         __le32 phy_capab;
6180         __le32 num_rf_chains;
6181         __le32 eeprom_rd;
6182         __le32 num_mem_reqs;
6183         const __le32 *service_map;
6184         size_t service_map_len;
6185         const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6186 };
6187
6188 struct wmi_rdy_ev_arg {
6189         __le32 sw_version;
6190         __le32 abi_version;
6191         __le32 status;
6192         const u8 *mac_addr;
6193 };
6194
6195 struct wmi_roam_ev_arg {
6196         __le32 vdev_id;
6197         __le32 reason;
6198         __le32 rssi;
6199 };
6200
6201 struct wmi_pdev_temperature_event {
6202         /* temperature value in Celcius degree */
6203         __le32 temperature;
6204 } __packed;
6205
6206 /* WOW structures */
6207 enum wmi_wow_wakeup_event {
6208         WOW_BMISS_EVENT = 0,
6209         WOW_BETTER_AP_EVENT,
6210         WOW_DEAUTH_RECVD_EVENT,
6211         WOW_MAGIC_PKT_RECVD_EVENT,
6212         WOW_GTK_ERR_EVENT,
6213         WOW_FOURWAY_HSHAKE_EVENT,
6214         WOW_EAPOL_RECVD_EVENT,
6215         WOW_NLO_DETECTED_EVENT,
6216         WOW_DISASSOC_RECVD_EVENT,
6217         WOW_PATTERN_MATCH_EVENT,
6218         WOW_CSA_IE_EVENT,
6219         WOW_PROBE_REQ_WPS_IE_EVENT,
6220         WOW_AUTH_REQ_EVENT,
6221         WOW_ASSOC_REQ_EVENT,
6222         WOW_HTT_EVENT,
6223         WOW_RA_MATCH_EVENT,
6224         WOW_HOST_AUTO_SHUTDOWN_EVENT,
6225         WOW_IOAC_MAGIC_EVENT,
6226         WOW_IOAC_SHORT_EVENT,
6227         WOW_IOAC_EXTEND_EVENT,
6228         WOW_IOAC_TIMER_EVENT,
6229         WOW_DFS_PHYERR_RADAR_EVENT,
6230         WOW_BEACON_EVENT,
6231         WOW_CLIENT_KICKOUT_EVENT,
6232         WOW_EVENT_MAX,
6233 };
6234
6235 #define C2S(x) case x: return #x
6236
6237 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6238 {
6239         switch (ev) {
6240         C2S(WOW_BMISS_EVENT);
6241         C2S(WOW_BETTER_AP_EVENT);
6242         C2S(WOW_DEAUTH_RECVD_EVENT);
6243         C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6244         C2S(WOW_GTK_ERR_EVENT);
6245         C2S(WOW_FOURWAY_HSHAKE_EVENT);
6246         C2S(WOW_EAPOL_RECVD_EVENT);
6247         C2S(WOW_NLO_DETECTED_EVENT);
6248         C2S(WOW_DISASSOC_RECVD_EVENT);
6249         C2S(WOW_PATTERN_MATCH_EVENT);
6250         C2S(WOW_CSA_IE_EVENT);
6251         C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
6252         C2S(WOW_AUTH_REQ_EVENT);
6253         C2S(WOW_ASSOC_REQ_EVENT);
6254         C2S(WOW_HTT_EVENT);
6255         C2S(WOW_RA_MATCH_EVENT);
6256         C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
6257         C2S(WOW_IOAC_MAGIC_EVENT);
6258         C2S(WOW_IOAC_SHORT_EVENT);
6259         C2S(WOW_IOAC_EXTEND_EVENT);
6260         C2S(WOW_IOAC_TIMER_EVENT);
6261         C2S(WOW_DFS_PHYERR_RADAR_EVENT);
6262         C2S(WOW_BEACON_EVENT);
6263         C2S(WOW_CLIENT_KICKOUT_EVENT);
6264         C2S(WOW_EVENT_MAX);
6265         default:
6266                 return NULL;
6267         }
6268 }
6269
6270 enum wmi_wow_wake_reason {
6271         WOW_REASON_UNSPECIFIED = -1,
6272         WOW_REASON_NLOD = 0,
6273         WOW_REASON_AP_ASSOC_LOST,
6274         WOW_REASON_LOW_RSSI,
6275         WOW_REASON_DEAUTH_RECVD,
6276         WOW_REASON_DISASSOC_RECVD,
6277         WOW_REASON_GTK_HS_ERR,
6278         WOW_REASON_EAP_REQ,
6279         WOW_REASON_FOURWAY_HS_RECV,
6280         WOW_REASON_TIMER_INTR_RECV,
6281         WOW_REASON_PATTERN_MATCH_FOUND,
6282         WOW_REASON_RECV_MAGIC_PATTERN,
6283         WOW_REASON_P2P_DISC,
6284         WOW_REASON_WLAN_HB,
6285         WOW_REASON_CSA_EVENT,
6286         WOW_REASON_PROBE_REQ_WPS_IE_RECV,
6287         WOW_REASON_AUTH_REQ_RECV,
6288         WOW_REASON_ASSOC_REQ_RECV,
6289         WOW_REASON_HTT_EVENT,
6290         WOW_REASON_RA_MATCH,
6291         WOW_REASON_HOST_AUTO_SHUTDOWN,
6292         WOW_REASON_IOAC_MAGIC_EVENT,
6293         WOW_REASON_IOAC_SHORT_EVENT,
6294         WOW_REASON_IOAC_EXTEND_EVENT,
6295         WOW_REASON_IOAC_TIMER_EVENT,
6296         WOW_REASON_ROAM_HO,
6297         WOW_REASON_DFS_PHYERR_RADADR_EVENT,
6298         WOW_REASON_BEACON_RECV,
6299         WOW_REASON_CLIENT_KICKOUT_EVENT,
6300         WOW_REASON_DEBUG_TEST = 0xFF,
6301 };
6302
6303 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
6304 {
6305         switch (reason) {
6306         C2S(WOW_REASON_UNSPECIFIED);
6307         C2S(WOW_REASON_NLOD);
6308         C2S(WOW_REASON_AP_ASSOC_LOST);
6309         C2S(WOW_REASON_LOW_RSSI);
6310         C2S(WOW_REASON_DEAUTH_RECVD);
6311         C2S(WOW_REASON_DISASSOC_RECVD);
6312         C2S(WOW_REASON_GTK_HS_ERR);
6313         C2S(WOW_REASON_EAP_REQ);
6314         C2S(WOW_REASON_FOURWAY_HS_RECV);
6315         C2S(WOW_REASON_TIMER_INTR_RECV);
6316         C2S(WOW_REASON_PATTERN_MATCH_FOUND);
6317         C2S(WOW_REASON_RECV_MAGIC_PATTERN);
6318         C2S(WOW_REASON_P2P_DISC);
6319         C2S(WOW_REASON_WLAN_HB);
6320         C2S(WOW_REASON_CSA_EVENT);
6321         C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
6322         C2S(WOW_REASON_AUTH_REQ_RECV);
6323         C2S(WOW_REASON_ASSOC_REQ_RECV);
6324         C2S(WOW_REASON_HTT_EVENT);
6325         C2S(WOW_REASON_RA_MATCH);
6326         C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
6327         C2S(WOW_REASON_IOAC_MAGIC_EVENT);
6328         C2S(WOW_REASON_IOAC_SHORT_EVENT);
6329         C2S(WOW_REASON_IOAC_EXTEND_EVENT);
6330         C2S(WOW_REASON_IOAC_TIMER_EVENT);
6331         C2S(WOW_REASON_ROAM_HO);
6332         C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
6333         C2S(WOW_REASON_BEACON_RECV);
6334         C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
6335         C2S(WOW_REASON_DEBUG_TEST);
6336         default:
6337                 return NULL;
6338         }
6339 }
6340
6341 #undef C2S
6342
6343 struct wmi_wow_ev_arg {
6344         u32 vdev_id;
6345         u32 flag;
6346         enum wmi_wow_wake_reason wake_reason;
6347         u32 data_len;
6348 };
6349
6350 #define WOW_MIN_PATTERN_SIZE    1
6351 #define WOW_MAX_PATTERN_SIZE    148
6352 #define WOW_MAX_PKT_OFFSET      128
6353
6354 enum wmi_tdls_state {
6355         WMI_TDLS_DISABLE,
6356         WMI_TDLS_ENABLE_PASSIVE,
6357         WMI_TDLS_ENABLE_ACTIVE,
6358 };
6359
6360 enum wmi_tdls_peer_state {
6361         WMI_TDLS_PEER_STATE_PEERING,
6362         WMI_TDLS_PEER_STATE_CONNECTED,
6363         WMI_TDLS_PEER_STATE_TEARDOWN,
6364 };
6365
6366 struct wmi_tdls_peer_update_cmd_arg {
6367         u32 vdev_id;
6368         enum wmi_tdls_peer_state peer_state;
6369         u8 addr[ETH_ALEN];
6370 };
6371
6372 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
6373
6374 struct wmi_tdls_peer_capab_arg {
6375         u8 peer_uapsd_queues;
6376         u8 peer_max_sp;
6377         u32 buff_sta_support;
6378         u32 off_chan_support;
6379         u32 peer_curr_operclass;
6380         u32 self_curr_operclass;
6381         u32 peer_chan_len;
6382         u32 peer_operclass_len;
6383         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
6384         u32 is_peer_responder;
6385         u32 pref_offchan_num;
6386         u32 pref_offchan_bw;
6387 };
6388
6389 enum wmi_txbf_conf {
6390         WMI_TXBF_CONF_UNSUPPORTED,
6391         WMI_TXBF_CONF_BEFORE_ASSOC,
6392         WMI_TXBF_CONF_AFTER_ASSOC,
6393 };
6394
6395 #define WMI_CCA_DETECT_LEVEL_AUTO       0
6396 #define WMI_CCA_DETECT_MARGIN_AUTO      0
6397
6398 struct wmi_pdev_set_adaptive_cca_params {
6399         __le32 enable;
6400         __le32 cca_detect_level;
6401         __le32 cca_detect_margin;
6402 } __packed;
6403
6404 struct ath10k;
6405 struct ath10k_vif;
6406 struct ath10k_fw_stats_pdev;
6407 struct ath10k_fw_stats_peer;
6408 struct ath10k_fw_stats;
6409
6410 int ath10k_wmi_attach(struct ath10k *ar);
6411 void ath10k_wmi_detach(struct ath10k *ar);
6412 void ath10k_wmi_free_host_mem(struct ath10k *ar);
6413 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
6414 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
6415
6416 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
6417 int ath10k_wmi_connect(struct ath10k *ar);
6418
6419 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
6420 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
6421 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
6422                                u32 cmd_id);
6423 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
6424
6425 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
6426                                      struct ath10k_fw_stats_pdev *dst);
6427 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
6428                                    struct ath10k_fw_stats_pdev *dst);
6429 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
6430                                    struct ath10k_fw_stats_pdev *dst);
6431 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
6432                                       struct ath10k_fw_stats_pdev *dst);
6433 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
6434                                 struct ath10k_fw_stats_peer *dst);
6435 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
6436                                     struct wmi_host_mem_chunks *chunks);
6437 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
6438                                       const struct wmi_start_scan_arg *arg);
6439 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
6440                               const struct wmi_wmm_params_arg *arg);
6441 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
6442                                 const struct wmi_channel_arg *arg);
6443 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
6444
6445 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
6446 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
6447 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
6448 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
6449 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
6450 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
6451 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
6452 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
6453 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
6454 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
6455 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
6456 void ath10k_wmi_event_dfs(struct ath10k *ar,
6457                           struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
6458 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
6459                                     struct wmi_phyerr_ev_arg *phyerr,
6460                                     u64 tsf);
6461 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
6462 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
6463 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
6464 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
6465 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
6466 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
6467 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
6468                                              struct sk_buff *skb);
6469 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
6470                                              struct sk_buff *skb);
6471 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
6472 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
6473 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
6474 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
6475 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
6476 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
6477                                          struct sk_buff *skb);
6478 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
6479 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
6480 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
6481 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
6482                                                 struct sk_buff *skb);
6483 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
6484 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
6485 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
6486 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
6487 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
6488 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
6489                                  int left_len, struct wmi_phyerr_ev_arg *arg);
6490 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
6491                                       struct ath10k_fw_stats *fw_stats,
6492                                       char *buf);
6493 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
6494                                      struct ath10k_fw_stats *fw_stats,
6495                                      char *buf);
6496 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
6497 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
6498 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
6499                                       struct ath10k_fw_stats *fw_stats,
6500                                       char *buf);
6501 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
6502                                    enum wmi_vdev_subtype subtype);
6503
6504 #endif /* _WMI_H_ */