ath5k: struct ath5k_desc cleanups
[cascardo/linux.git] / drivers / net / wireless / ath5k / ath5k.h
1 /*
2  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3  * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
4  *
5  * Permission to use, copy, modify, and distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #ifndef _ATH5K_H
19 #define _ATH5K_H
20
21 /* Set this to 1 to disable regulatory domain restrictions for channel tests.
22  * WARNING: This is for debuging only and has side effects (eg. scan takes too
23  * long and results timeouts). It's also illegal to tune to some of the
24  * supported frequencies in some countries, so use this at your own risk,
25  * you've been warned. */
26 #define CHAN_DEBUG      0
27
28 #include <linux/io.h>
29 #include <linux/types.h>
30 #include <net/mac80211.h>
31
32 #include "hw.h"
33
34 /* PCI IDs */
35 #define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
36 #define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
37 #define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
38 #define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
39 #define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
40 #define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
41 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
42 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
43 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
44 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
45 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
46 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
47 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
48 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
49 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
50 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
51 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
52 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
53 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
54 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
55 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
56 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
57 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
58 #define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
59 #define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
60 #define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
61 #define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
62 #define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */
63
64 /****************************\
65   GENERIC DRIVER DEFINITIONS
66 \****************************/
67
68 #define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
69
70 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
71         printk(_level "ath5k %s: " _fmt, \
72                 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
73                 ##__VA_ARGS__)
74
75 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
76         if (net_ratelimit()) \
77                 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
78         } while (0)
79
80 #define ATH5K_INFO(_sc, _fmt, ...) \
81         ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
82
83 #define ATH5K_WARN(_sc, _fmt, ...) \
84         ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
85
86 #define ATH5K_ERR(_sc, _fmt, ...) \
87         ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
88
89 /*
90  * Some tuneable values (these should be changeable by the user)
91  */
92 #define AR5K_TUNE_DMA_BEACON_RESP               2
93 #define AR5K_TUNE_SW_BEACON_RESP                10
94 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
95 #define AR5K_TUNE_RADAR_ALERT                   false
96 #define AR5K_TUNE_MIN_TX_FIFO_THRES             1
97 #define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
98 #define AR5K_TUNE_REGISTER_TIMEOUT              20000
99 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
100  * be the max value. */
101 #define AR5K_TUNE_RSSI_THRES                   129
102 /* This must be set when setting the RSSI threshold otherwise it can
103  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
104  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
105  * track of it. Max value depends on harware. For AR5210 this is just 7.
106  * For AR5211+ this seems to be up to 255. */
107 #define AR5K_TUNE_BMISS_THRES                  7
108 #define AR5K_TUNE_REGISTER_DWELL_TIME           20000
109 #define AR5K_TUNE_BEACON_INTERVAL               100
110 #define AR5K_TUNE_AIFS                          2
111 #define AR5K_TUNE_AIFS_11B                      2
112 #define AR5K_TUNE_AIFS_XR                       0
113 #define AR5K_TUNE_CWMIN                         15
114 #define AR5K_TUNE_CWMIN_11B                     31
115 #define AR5K_TUNE_CWMIN_XR                      3
116 #define AR5K_TUNE_CWMAX                         1023
117 #define AR5K_TUNE_CWMAX_11B                     1023
118 #define AR5K_TUNE_CWMAX_XR                      7
119 #define AR5K_TUNE_NOISE_FLOOR                   -72
120 #define AR5K_TUNE_MAX_TXPOWER                   60
121 #define AR5K_TUNE_DEFAULT_TXPOWER               30
122 #define AR5K_TUNE_TPC_TXPOWER                   true
123 #define AR5K_TUNE_ANT_DIVERSITY                 true
124 #define AR5K_TUNE_HWTXTRIES                     4
125
126 /* token to use for aifs, cwmin, cwmax in MadWiFi */
127 #define AR5K_TXQ_USEDEFAULT     ((u32) -1)
128
129 /* GENERIC CHIPSET DEFINITIONS */
130
131 /* MAC Chips */
132 enum ath5k_version {
133         AR5K_AR5210     = 0,
134         AR5K_AR5211     = 1,
135         AR5K_AR5212     = 2,
136 };
137
138 /* PHY Chips */
139 enum ath5k_radio {
140         AR5K_RF5110     = 0,
141         AR5K_RF5111     = 1,
142         AR5K_RF5112     = 2,
143         AR5K_RF2413     = 3,
144         AR5K_RF5413     = 4,
145 };
146
147 /*
148  * Common silicon revision/version values
149  */
150
151 enum ath5k_srev_type {
152         AR5K_VERSION_VER,
153         AR5K_VERSION_RAD,
154 };
155
156 struct ath5k_srev_name {
157         const char              *sr_name;
158         enum ath5k_srev_type    sr_type;
159         u_int                   sr_val;
160 };
161
162 #define AR5K_SREV_UNKNOWN       0xffff
163
164 #define AR5K_SREV_VER_AR5210    0x00
165 #define AR5K_SREV_VER_AR5311    0x10
166 #define AR5K_SREV_VER_AR5311A   0x20
167 #define AR5K_SREV_VER_AR5311B   0x30
168 #define AR5K_SREV_VER_AR5211    0x40
169 #define AR5K_SREV_VER_AR5212    0x50
170 #define AR5K_SREV_VER_AR5213    0x55
171 #define AR5K_SREV_VER_AR5213A   0x59
172 #define AR5K_SREV_VER_AR2413    0x78
173 #define AR5K_SREV_VER_AR2414    0x79
174 #define AR5K_SREV_VER_AR2424    0xa0 /* PCI-E */
175 #define AR5K_SREV_VER_AR5424    0xa3 /* PCI-E */
176 #define AR5K_SREV_VER_AR5413    0xa4
177 #define AR5K_SREV_VER_AR5414    0xa5
178 #define AR5K_SREV_VER_AR5416    0xc0 /* PCI-E */
179 #define AR5K_SREV_VER_AR5418    0xca /* PCI-E */
180 #define AR5K_SREV_VER_AR2425    0xe2 /* PCI-E */
181
182 #define AR5K_SREV_RAD_5110      0x00
183 #define AR5K_SREV_RAD_5111      0x10
184 #define AR5K_SREV_RAD_5111A     0x15
185 #define AR5K_SREV_RAD_2111      0x20
186 #define AR5K_SREV_RAD_5112      0x30
187 #define AR5K_SREV_RAD_5112A     0x35
188 #define AR5K_SREV_RAD_2112      0x40
189 #define AR5K_SREV_RAD_2112A     0x45
190 #define AR5K_SREV_RAD_SC0       0x56    /* Found on 2413/2414 */
191 #define AR5K_SREV_RAD_SC1       0x63    /* Found on 5413/5414 */
192 #define AR5K_SREV_RAD_SC2       0xa2    /* Found on 2424-5/5424 */
193 #define AR5K_SREV_RAD_5133      0xc0    /* MIMO found on 5418 */
194
195 /* IEEE defs */
196
197 #define IEEE80211_MAX_LEN       2500
198
199 /* TODO add support to mac80211 for vendor-specific rates and modes */
200
201 /*
202  * Some of this information is based on Documentation from:
203  *
204  * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
205  *
206  * Modulation for Atheros' eXtended Range - range enhancing extension that is
207  * supposed to double the distance an Atheros client device can keep a
208  * connection with an Atheros access point. This is achieved by increasing
209  * the receiver sensitivity up to, -105dBm, which is about 20dB above what
210  * the 802.11 specifications demand. In addition, new (proprietary) data rates
211  * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
212  *
213  * Please note that can you either use XR or TURBO but you cannot use both,
214  * they are exclusive.
215  *
216  */
217 #define MODULATION_XR           0x00000200
218 /*
219  * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
220  * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
221  * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
222  * channels. To use this feature your Access Point must also suport it.
223  * There is also a distinction between "static" and "dynamic" turbo modes:
224  *
225  * - Static: is the dumb version: devices set to this mode stick to it until
226  *     the mode is turned off.
227  * - Dynamic: is the intelligent version, the network decides itself if it
228  *     is ok to use turbo. As soon as traffic is detected on adjacent channels
229  *     (which would get used in turbo mode), or when a non-turbo station joins
230  *     the network, turbo mode won't be used until the situation changes again.
231  *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
232  *     monitors the used radio band in order to decide whether turbo mode may
233  *     be used or not.
234  *
235  * This article claims Super G sticks to bonding of channels 5 and 6 for
236  * USA:
237  *
238  * http://www.pcworld.com/article/id,113428-page,1/article.html
239  *
240  * The channel bonding seems to be driver specific though. In addition to
241  * deciding what channels will be used, these "Turbo" modes are accomplished
242  * by also enabling the following features:
243  *
244  * - Bursting: allows multiple frames to be sent at once, rather than pausing
245  *     after each frame. Bursting is a standards-compliant feature that can be
246  *     used with any Access Point.
247  * - Fast frames: increases the amount of information that can be sent per
248  *     frame, also resulting in a reduction of transmission overhead. It is a
249  *     proprietary feature that needs to be supported by the Access Point.
250  * - Compression: data frames are compressed in real time using a Lempel Ziv
251  *     algorithm. This is done transparently. Once this feature is enabled,
252  *     compression and decompression takes place inside the chipset, without
253  *     putting additional load on the host CPU.
254  *
255  */
256 #define MODULATION_TURBO        0x00000080
257
258 enum ath5k_driver_mode {
259         AR5K_MODE_11A           =       0,
260         AR5K_MODE_11A_TURBO     =       1,
261         AR5K_MODE_11B           =       2,
262         AR5K_MODE_11G           =       3,
263         AR5K_MODE_11G_TURBO     =       4,
264         AR5K_MODE_XR            =       0,
265         AR5K_MODE_MAX           =       5
266 };
267
268 /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
269 #define AR5K_SET_SHORT_PREAMBLE 0x04
270
271 #define HAS_SHPREAMBLE(_ix) \
272         (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
273 #define SHPREAMBLE_FLAG(_ix) \
274         (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
275
276
277 /****************\
278   TX DEFINITIONS
279 \****************/
280
281 /*
282  * TX Status
283  */
284 struct ath5k_tx_status {
285         u16     ts_seqnum;
286         u16     ts_tstamp;
287         u8      ts_status;
288         u8      ts_rate;
289         s8      ts_rssi;
290         u8      ts_shortretry;
291         u8      ts_longretry;
292         u8      ts_virtcol;
293         u8      ts_antenna;
294 };
295
296 #define AR5K_TXSTAT_ALTRATE     0x80
297 #define AR5K_TXERR_XRETRY       0x01
298 #define AR5K_TXERR_FILT         0x02
299 #define AR5K_TXERR_FIFO         0x04
300
301 /**
302  * enum ath5k_tx_queue - Queue types used to classify tx queues.
303  * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
304  * @AR5K_TX_QUEUE_DATA: A normal data queue
305  * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
306  * @AR5K_TX_QUEUE_BEACON: The beacon queue
307  * @AR5K_TX_QUEUE_CAB: The after-beacon queue
308  * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
309  */
310 enum ath5k_tx_queue {
311         AR5K_TX_QUEUE_INACTIVE = 0,
312         AR5K_TX_QUEUE_DATA,
313         AR5K_TX_QUEUE_XR_DATA,
314         AR5K_TX_QUEUE_BEACON,
315         AR5K_TX_QUEUE_CAB,
316         AR5K_TX_QUEUE_UAPSD,
317 };
318
319 #define AR5K_NUM_TX_QUEUES              10
320 #define AR5K_NUM_TX_QUEUES_NOQCU        2
321
322 /*
323  * Queue syb-types to classify normal data queues.
324  * These are the 4 Access Categories as defined in
325  * WME spec. 0 is the lowest priority and 4 is the
326  * highest. Normal data that hasn't been classified
327  * goes to the Best Effort AC.
328  */
329 enum ath5k_tx_queue_subtype {
330         AR5K_WME_AC_BK = 0,     /*Background traffic*/
331         AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
332         AR5K_WME_AC_VI,         /*Video traffic*/
333         AR5K_WME_AC_VO,         /*Voice traffic*/
334 };
335
336 /*
337  * Queue ID numbers as returned by the hw functions, each number
338  * represents a hw queue. If hw does not support hw queues
339  * (eg 5210) all data goes in one queue. These match
340  * d80211 definitions (net80211/MadWiFi don't use them).
341  */
342 enum ath5k_tx_queue_id {
343         AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
344         AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
345         AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
346         AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
347         AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
348         AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
349         AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
350         AR5K_TX_QUEUE_ID_UAPSD          = 8,
351         AR5K_TX_QUEUE_ID_XR_DATA        = 9,
352 };
353
354
355 /*
356  * Flags to set hw queue's parameters...
357  */
358 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
359 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
360 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
361 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
362 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
363 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0020  /* Disable random post-backoff */
364 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040  /* Enable ready time expiry policy (?)*/
365 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080  /* Enable backoff while bursting */
366 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x0100  /* Disable backoff while bursting */
367 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x0200  /* Enable hw compression -not implemented-*/
368
369 /*
370  * A struct to hold tx queue's parameters
371  */
372 struct ath5k_txq_info {
373         enum ath5k_tx_queue tqi_type;
374         enum ath5k_tx_queue_subtype tqi_subtype;
375         u16     tqi_flags;      /* Tx queue flags (see above) */
376         u32     tqi_aifs;       /* Arbitrated Interframe Space */
377         s32     tqi_cw_min;     /* Minimum Contention Window */
378         s32     tqi_cw_max;     /* Maximum Contention Window */
379         u32     tqi_cbr_period; /* Constant bit rate period */
380         u32     tqi_cbr_overflow_limit;
381         u32     tqi_burst_time;
382         u32     tqi_ready_time; /* Not used */
383 };
384
385 /*
386  * Transmit packet types.
387  * These are not fully used inside OpenHAL yet
388  */
389 enum ath5k_pkt_type {
390         AR5K_PKT_TYPE_NORMAL            = 0,
391         AR5K_PKT_TYPE_ATIM              = 1,
392         AR5K_PKT_TYPE_PSPOLL            = 2,
393         AR5K_PKT_TYPE_BEACON            = 3,
394         AR5K_PKT_TYPE_PROBE_RESP        = 4,
395         AR5K_PKT_TYPE_PIFS              = 5,
396 };
397
398 /*
399  * TX power and TPC settings
400  */
401 #define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
402         ((0 & 1) << ((_v) + 6)) |                               \
403         (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))     \
404 )
405
406 #define AR5K_TXPOWER_CCK(_r, _v)        (                       \
407         (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
408 )
409
410 /*
411  * DMA size definitions (2^n+2)
412  */
413 enum ath5k_dmasize {
414         AR5K_DMASIZE_4B = 0,
415         AR5K_DMASIZE_8B,
416         AR5K_DMASIZE_16B,
417         AR5K_DMASIZE_32B,
418         AR5K_DMASIZE_64B,
419         AR5K_DMASIZE_128B,
420         AR5K_DMASIZE_256B,
421         AR5K_DMASIZE_512B
422 };
423
424
425 /****************\
426   RX DEFINITIONS
427 \****************/
428
429 /*
430  * RX Status
431  */
432 struct ath5k_rx_status {
433         u16     rs_datalen;
434         u16     rs_tstamp;
435         u8      rs_status;
436         u8      rs_phyerr;
437         s8      rs_rssi;
438         u8      rs_keyix;
439         u8      rs_rate;
440         u8      rs_antenna;
441         u8      rs_more;
442 };
443
444 #define AR5K_RXERR_CRC          0x01
445 #define AR5K_RXERR_PHY          0x02
446 #define AR5K_RXERR_FIFO         0x04
447 #define AR5K_RXERR_DECRYPT      0x08
448 #define AR5K_RXERR_MIC          0x10
449 #define AR5K_RXKEYIX_INVALID    ((u8) - 1)
450 #define AR5K_TXKEYIX_INVALID    ((u32) - 1)
451
452 struct ath5k_mib_stats {
453         u32     ackrcv_bad;
454         u32     rts_bad;
455         u32     rts_good;
456         u32     fcs_bad;
457         u32     beacons;
458 };
459
460
461 /**************************\
462  BEACON TIMERS DEFINITIONS
463 \**************************/
464
465 #define AR5K_BEACON_PERIOD      0x0000ffff
466 #define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
467 #define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/
468
469 #if 0
470 /**
471  * struct ath5k_beacon_state - Per-station beacon timer state.
472  * @bs_interval: in TU's, can also include the above flags
473  * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
474  *      Point Coordination Function capable AP
475  */
476 struct ath5k_beacon_state {
477         u32     bs_next_beacon;
478         u32     bs_next_dtim;
479         u32     bs_interval;
480         u8      bs_dtim_period;
481         u8      bs_cfp_period;
482         u16     bs_cfp_max_duration;
483         u16     bs_cfp_du_remain;
484         u16     bs_tim_offset;
485         u16     bs_sleep_duration;
486         u16     bs_bmiss_threshold;
487         u32     bs_cfp_next;
488 };
489 #endif
490
491
492 /*
493  * TSF to TU conversion:
494  *
495  * TSF is a 64bit value in usec (microseconds).
496  * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
497  * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
498  */
499 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
500
501
502 /********************\
503   COMMON DEFINITIONS
504 \********************/
505
506 /*
507  * Atheros hardware descriptor
508  */
509 struct ath5k_desc {
510         u32     ds_link;        /* physical address of the next descriptor */
511         u32     ds_data;        /* physical address of data buffer (skb) */
512
513         union {
514                 struct ath5k_hw_5210_tx_desc    ds_tx5210;
515                 struct ath5k_hw_5212_tx_desc    ds_tx5212;
516                 struct ath5k_hw_all_rx_desc     ds_rx;
517         } ud;
518
519         union {
520                 struct ath5k_rx_status rx;
521                 struct ath5k_tx_status tx;
522         } ds_us;
523
524 #define ds_rxstat ds_us.rx
525 #define ds_txstat ds_us.tx
526
527 } __packed;
528
529 #define AR5K_RXDESC_INTREQ      0x0020
530
531 #define AR5K_TXDESC_CLRDMASK    0x0001
532 #define AR5K_TXDESC_NOACK       0x0002  /*[5211+]*/
533 #define AR5K_TXDESC_RTSENA      0x0004
534 #define AR5K_TXDESC_CTSENA      0x0008
535 #define AR5K_TXDESC_INTREQ      0x0010
536 #define AR5K_TXDESC_VEOL        0x0020  /*[5211+]*/
537
538 #define AR5K_SLOT_TIME_9        396
539 #define AR5K_SLOT_TIME_20       880
540 #define AR5K_SLOT_TIME_MAX      0xffff
541
542 /* channel_flags */
543 #define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
544 #define CHANNEL_TURBO   0x0010  /* Turbo Channel */
545 #define CHANNEL_CCK     0x0020  /* CCK channel */
546 #define CHANNEL_OFDM    0x0040  /* OFDM channel */
547 #define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
548 #define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
549 #define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
550 #define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
551 #define CHANNEL_XR      0x0800  /* XR channel */
552
553 #define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
554 #define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
555 #define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
556 #define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
557 #define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
558 #define CHANNEL_108A    CHANNEL_T
559 #define CHANNEL_108G    CHANNEL_TG
560 #define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
561
562 #define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
563                 CHANNEL_TURBO)
564
565 #define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
566 #define CHANNEL_MODES           CHANNEL_ALL
567
568 /*
569  * Used internaly in OpenHAL (ar5211.c/ar5212.c
570  * for reset_tx_queue). Also see struct struct ieee80211_channel.
571  */
572 #define IS_CHAN_XR(_c)  ((_c.hw_value & CHANNEL_XR) != 0)
573 #define IS_CHAN_B(_c)   ((_c.hw_value & CHANNEL_B) != 0)
574
575 /*
576  * The following structure will be used to map 2GHz channels to
577  * 5GHz Atheros channels.
578  */
579 struct ath5k_athchan_2ghz {
580         u32     a2_flags;
581         u16     a2_athchan;
582 };
583
584 /*
585  * Rate definitions
586  * TODO: Clean them up or move them on mac80211 -most of these infos are
587  *       used by the rate control algorytm on MadWiFi.
588  */
589
590 /* Max number of rates on the rate table and what it seems
591  * Atheros hardware supports */
592 #define AR5K_MAX_RATES 32
593
594 /**
595  * struct ath5k_rate - rate structure
596  * @valid: is this a valid rate for rate control (remove)
597  * @modulation: respective mac80211 modulation
598  * @rate_kbps: rate in kbit/s
599  * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
600  *     &struct ath5k_rx_status.rs_rate and on TX on
601  *     &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
602  *     up to 32 rates, indexed by 1-32. This means we really only need
603  *     6 bits for the rate_code.
604  * @dot11_rate: respective IEEE-802.11 rate value
605  * @control_rate: index of rate assumed to be used to send control frames.
606  *     This can be used to set override the value on the rate duration
607  *     registers. This is only useful if we can override in the harware at
608  *     what rate we want to send control frames at. Note that IEEE-802.11
609  *     Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
610  *     should send ACK/CTS, if we change this value we can be breaking
611  *     the spec.
612  *
613  * This structure is used to get the RX rate or set the TX rate on the
614  * hardware descriptors. It is also used for internal modulation control
615  * and settings.
616  *
617  * On RX after the &struct ath5k_desc is parsed by the appropriate
618  * ah_proc_rx_desc() the respective hardware rate value is set in
619  * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
620  * &struct ath5k_tx_status.ts_rate which is later used to setup the
621  * &struct ath5k_desc correctly. This is the hardware rate map we are
622  * aware of:
623  *
624  * rate_code   1       2       3       4       5       6       7       8
625  * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
626  *
627  * rate_code   9       10      11      12      13      14      15      16
628  * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
629  *
630  * rate_code   17      18      19      20      21      22      23      24
631  * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
632  *
633  * rate_code   25      26      27      28      29      30      31      32
634  * rate_kbps   5500    2000    1000    ?       ?       ?       ?       ?
635  *
636  */
637 struct ath5k_rate {
638         u8      valid;
639         u32     modulation;
640         u16     rate_kbps;
641         u8      rate_code;
642         u8      dot11_rate;
643         u8      control_rate;
644 };
645
646 /* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
647 struct ath5k_rate_table {
648         u16     rate_count;
649         u8      rate_code_to_index[AR5K_MAX_RATES];     /* Back-mapping */
650         struct ath5k_rate rates[AR5K_MAX_RATES];
651 };
652
653 /*
654  * Rate tables...
655  * TODO: CLEAN THIS !!!
656  */
657 #define AR5K_RATES_11A { 8, {                                   \
658         255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
659         7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
660         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
661         { 1, 0, 6000, 11, 140, 0 },             \
662         { 1, 0, 9000, 15, 18, 0 },              \
663         { 1, 0, 12000, 10, 152, 2 },            \
664         { 1, 0, 18000, 14, 36, 2 },             \
665         { 1, 0, 24000, 9, 176, 4 },             \
666         { 1, 0, 36000, 13, 72, 4 },             \
667         { 1, 0, 48000, 8, 96, 4 },              \
668         { 1, 0, 54000, 12, 108, 4 } }           \
669 }
670
671 #define AR5K_RATES_11B { 4, {                                           \
672         255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
673         255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,     \
674         3, 2, 1, 0, 255, 255, 255, 255 }, {                             \
675         { 1, 0, 1000, 27, 130, 0 },     \
676         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
677         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
678         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } }       \
679 }
680
681 #define AR5K_RATES_11G { 12, {                                  \
682         255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4,    \
683         11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
684         3, 2, 1, 0, 255, 255, 255, 255 }, {                     \
685         { 1, 0, 1000, 27, 2, 0 },               \
686         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 },           \
687         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 },          \
688         { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
689         { 0, 0, 6000, 11, 12, 4 },      \
690         { 0, 0, 9000, 15, 18, 4 },      \
691         { 1, 0, 12000, 10, 24, 6 },     \
692         { 1, 0, 18000, 14, 36, 6 },     \
693         { 1, 0, 24000, 9, 48, 8 },      \
694         { 1, 0, 36000, 13, 72, 8 },     \
695         { 1, 0, 48000, 8, 96, 8 },      \
696         { 1, 0, 54000, 12, 108, 8 } }   \
697 }
698
699 #define AR5K_RATES_TURBO { 8, {                                 \
700         255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0,     \
701         7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255,     \
702         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
703         { 1, MODULATION_TURBO, 6000, 11, 140, 0 },      \
704         { 1, MODULATION_TURBO, 9000, 15, 18, 0 },       \
705         { 1, MODULATION_TURBO, 12000, 10, 152, 2 },     \
706         { 1, MODULATION_TURBO, 18000, 14, 36, 2 },      \
707         { 1, MODULATION_TURBO, 24000, 9, 176, 4 },      \
708         { 1, MODULATION_TURBO, 36000, 13, 72, 4 },      \
709         { 1, MODULATION_TURBO, 48000, 8, 96, 4 },       \
710         { 1, MODULATION_TURBO, 54000, 12, 108, 4 } }    \
711 }
712
713 #define AR5K_RATES_XR { 12, {                                   \
714         255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4,            \
715         11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255,    \
716         255, 255, 255, 255, 255, 255, 255, 255 }, {             \
717         { 1, MODULATION_XR, 500, 7, 129, 0 },           \
718         { 1, MODULATION_XR, 1000, 2, 139, 1 },          \
719         { 1, MODULATION_XR, 2000, 6, 150, 2 },          \
720         { 1, MODULATION_XR, 3000, 1, 150, 3 },          \
721         { 1, 0, 6000, 11, 140, 4 },     \
722         { 1, 0, 9000, 15, 18, 4 },      \
723         { 1, 0, 12000, 10, 152, 6 },    \
724         { 1, 0, 18000, 14, 36, 6 },     \
725         { 1, 0, 24000, 9, 176, 8 },     \
726         { 1, 0, 36000, 13, 72, 8 },     \
727         { 1, 0, 48000, 8, 96, 8 },      \
728         { 1, 0, 54000, 12, 108, 8 } }   \
729 }
730
731 /*
732  * Crypto definitions
733  */
734
735 #define AR5K_KEYCACHE_SIZE      8
736
737 /***********************\
738  HW RELATED DEFINITIONS
739 \***********************/
740
741 /*
742  * Misc definitions
743  */
744 #define AR5K_RSSI_EP_MULTIPLIER (1<<7)
745
746 #define AR5K_ASSERT_ENTRY(_e, _s) do {          \
747         if (_e >= _s)                           \
748                 return (false);                 \
749 } while (0)
750
751
752 enum ath5k_ant_setting {
753         AR5K_ANT_VARIABLE       = 0,    /* variable by programming */
754         AR5K_ANT_FIXED_A        = 1,    /* fixed to 11a frequencies */
755         AR5K_ANT_FIXED_B        = 2,    /* fixed to 11b frequencies */
756         AR5K_ANT_MAX            = 3,
757 };
758
759 /*
760  * Hardware interrupt abstraction
761  */
762
763 /**
764  * enum ath5k_int - Hardware interrupt masks helpers
765  *
766  * @AR5K_INT_RX: mask to identify received frame interrupts, of type
767  *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
768  * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
769  * @AR5K_INT_RXNOFRM: No frame received (?)
770  * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
771  *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
772  *      LinkPtr is NULL. For more details, refer to:
773  *      http://www.freepatentsonline.com/20030225739.html
774  * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
775  *      Note that Rx overrun is not always fatal, on some chips we can continue
776  *      operation without reseting the card, that's why int_fatal is not
777  *      common for all chips.
778  * @AR5K_INT_TX: mask to identify received frame interrupts, of type
779  *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
780  * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
781  * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
782  *      We currently do increments on interrupt by
783  *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
784  * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
785  *      checked. We should do this with ath5k_hw_update_mib_counters() but
786  *      it seems we should also then do some noise immunity work.
787  * @AR5K_INT_RXPHY: RX PHY Error
788  * @AR5K_INT_RXKCM: ??
789  * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
790  *      beacon that must be handled in software. The alternative is if you
791  *      have VEOL support, in that case you let the hardware deal with things.
792  * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
793  *      beacons from the AP have associated with, we should probably try to
794  *      reassociate. When in IBSS mode this might mean we have not received
795  *      any beacons from any local stations. Note that every station in an
796  *      IBSS schedules to send beacons at the Target Beacon Transmission Time
797  *      (TBTT) with a random backoff.
798  * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
799  * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
800  *      until properly handled
801  * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
802  *      errors. These types of errors we can enable seem to be of type
803  *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
804  * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
805  * @AR5K_INT_NOCARD: signals the card has been removed
806  * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
807  *      bit value
808  *
809  * These are mapped to take advantage of some common bits
810  * between the MACs, to be able to set intr properties
811  * easier. Some of them are not used yet inside hw.c. Most map
812  * to the respective hw interrupt value as they are common amogst different
813  * MACs.
814  */
815 enum ath5k_int {
816         AR5K_INT_RX     = 0x00000001, /* Not common */
817         AR5K_INT_RXDESC = 0x00000002,
818         AR5K_INT_RXNOFRM = 0x00000008,
819         AR5K_INT_RXEOL  = 0x00000010,
820         AR5K_INT_RXORN  = 0x00000020,
821         AR5K_INT_TX     = 0x00000040, /* Not common */
822         AR5K_INT_TXDESC = 0x00000080,
823         AR5K_INT_TXURN  = 0x00000800,
824         AR5K_INT_MIB    = 0x00001000,
825         AR5K_INT_RXPHY  = 0x00004000,
826         AR5K_INT_RXKCM  = 0x00008000,
827         AR5K_INT_SWBA   = 0x00010000,
828         AR5K_INT_BMISS  = 0x00040000,
829         AR5K_INT_BNR    = 0x00100000, /* Not common */
830         AR5K_INT_GPIO   = 0x01000000,
831         AR5K_INT_FATAL  = 0x40000000, /* Not common */
832         AR5K_INT_GLOBAL = 0x80000000,
833
834         AR5K_INT_COMMON  = AR5K_INT_RXNOFRM
835                         | AR5K_INT_RXDESC
836                         | AR5K_INT_RXEOL
837                         | AR5K_INT_RXORN
838                         | AR5K_INT_TXURN
839                         | AR5K_INT_TXDESC
840                         | AR5K_INT_MIB
841                         | AR5K_INT_RXPHY
842                         | AR5K_INT_RXKCM
843                         | AR5K_INT_SWBA
844                         | AR5K_INT_BMISS
845                         | AR5K_INT_GPIO,
846         AR5K_INT_NOCARD = 0xffffffff
847 };
848
849 /*
850  * Power management
851  */
852 enum ath5k_power_mode {
853         AR5K_PM_UNDEFINED = 0,
854         AR5K_PM_AUTO,
855         AR5K_PM_AWAKE,
856         AR5K_PM_FULL_SLEEP,
857         AR5K_PM_NETWORK_SLEEP,
858 };
859
860 /*
861  * These match net80211 definitions (not used in
862  * d80211).
863  */
864 #define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
865 #define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
866 #define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
867 #define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
868 #define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/
869
870 /* GPIO-controlled software LED */
871 #define AR5K_SOFTLED_PIN        0
872 #define AR5K_SOFTLED_ON         0
873 #define AR5K_SOFTLED_OFF        1
874
875 /*
876  * Chipset capabilities -see ath5k_hw_get_capability-
877  * get_capability function is not yet fully implemented
878  * in OpenHAL so most of these don't work yet...
879  */
880 enum ath5k_capability_type {
881         AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
882         AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
883         AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
884         AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
885         AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
886         AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
887         AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
888         AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
889         AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
890         AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
891         AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
892         AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
893         AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
894         AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
895         AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
896         AR5K_CAP_XR                     = 16,   /* Supports XR mode */
897         AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
898         AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
899         AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
900         AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
901 };
902
903
904 /* XXX: we *may* move cap_range stuff to struct wiphy */
905 struct ath5k_capabilities {
906         /*
907          * Supported PHY modes
908          * (ie. CHANNEL_A, CHANNEL_B, ...)
909          */
910         DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
911
912         /*
913          * Frequency range (without regulation restrictions)
914          */
915         struct {
916                 u16     range_2ghz_min;
917                 u16     range_2ghz_max;
918                 u16     range_5ghz_min;
919                 u16     range_5ghz_max;
920         } cap_range;
921
922         /*
923          * Values stored in the EEPROM (some of them...)
924          */
925         struct ath5k_eeprom_info        cap_eeprom;
926
927         /*
928          * Queue information
929          */
930         struct {
931                 u8      q_tx_num;
932         } cap_queues;
933 };
934
935
936 /***************************************\
937   HARDWARE ABSTRACTION LAYER STRUCTURE
938 \***************************************/
939
940 /*
941  * Misc defines
942  */
943
944 #define AR5K_MAX_GPIO           10
945 #define AR5K_MAX_RF_BANKS       8
946
947 struct ath5k_hw {
948         u32                     ah_magic;
949
950         struct ath5k_softc      *ah_sc;
951         void __iomem            *ah_iobase;
952
953         enum ath5k_int          ah_imr;
954
955         enum ieee80211_if_types ah_op_mode;
956         enum ath5k_power_mode   ah_power_mode;
957         struct ieee80211_channel ah_current_channel;
958         bool                    ah_turbo;
959         bool                    ah_calibration;
960         bool                    ah_running;
961         bool                    ah_single_chip;
962         enum ath5k_rfgain       ah_rf_gain;
963
964         u32                     ah_mac_srev;
965         u16                     ah_mac_version;
966         u16                     ah_mac_revision;
967         u16                     ah_phy_revision;
968         u16                     ah_radio_5ghz_revision;
969         u16                     ah_radio_2ghz_revision;
970         u32                     ah_phy_spending;
971
972         enum ath5k_version      ah_version;
973         enum ath5k_radio        ah_radio;
974         u32                     ah_phy;
975
976         bool                    ah_5ghz;
977         bool                    ah_2ghz;
978
979 #define ah_regdomain            ah_capabilities.cap_regdomain.reg_current
980 #define ah_regdomain_hw         ah_capabilities.cap_regdomain.reg_hw
981 #define ah_modes                ah_capabilities.cap_mode
982 #define ah_ee_version           ah_capabilities.cap_eeprom.ee_version
983
984         u32                     ah_atim_window;
985         u32                     ah_aifs;
986         u32                     ah_cw_min;
987         u32                     ah_cw_max;
988         bool                    ah_software_retry;
989         u32                     ah_limit_tx_retries;
990
991         u32                     ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
992         bool                    ah_ant_diversity;
993
994         u8                      ah_sta_id[ETH_ALEN];
995
996         /* Current BSSID we are trying to assoc to / creating.
997          * This is passed by mac80211 on config_interface() and cached here for
998          * use in resets */
999         u8                      ah_bssid[ETH_ALEN];
1000
1001         u32                     ah_gpio[AR5K_MAX_GPIO];
1002         int                     ah_gpio_npins;
1003
1004         struct ath5k_capabilities ah_capabilities;
1005
1006         struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
1007         u32                     ah_txq_status;
1008         u32                     ah_txq_imr_txok;
1009         u32                     ah_txq_imr_txerr;
1010         u32                     ah_txq_imr_txurn;
1011         u32                     ah_txq_imr_txdesc;
1012         u32                     ah_txq_imr_txeol;
1013         u32                     *ah_rf_banks;
1014         size_t                  ah_rf_banks_size;
1015         struct ath5k_gain       ah_gain;
1016         u32                     ah_offset[AR5K_MAX_RF_BANKS];
1017
1018         struct {
1019                 u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
1020                 u16             txp_rates[AR5K_MAX_RATES];
1021                 s16             txp_min;
1022                 s16             txp_max;
1023                 bool            txp_tpc;
1024                 s16             txp_ofdm;
1025         } ah_txpower;
1026
1027         struct {
1028                 bool            r_enabled;
1029                 int             r_last_alert;
1030                 struct ieee80211_channel r_last_channel;
1031         } ah_radar;
1032
1033         /* noise floor from last periodic calibration */
1034         s32                     ah_noise_floor;
1035
1036         /*
1037          * Function pointers
1038          */
1039         int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1040                 unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
1041                 unsigned int, unsigned int, unsigned int, unsigned int,
1042                 unsigned int, unsigned int, unsigned int);
1043         int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1044                 unsigned int, unsigned int, unsigned int, unsigned int,
1045                 unsigned int, unsigned int);
1046         int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *);
1047         int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *);
1048 };
1049
1050 /*
1051  * Prototypes
1052  */
1053
1054 /* General Functions */
1055 extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
1056 /* Attach/Detach Functions */
1057 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
1058 extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
1059 extern void ath5k_hw_detach(struct ath5k_hw *ah);
1060 /* Reset Functions */
1061 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
1062 /* Power management functions */
1063 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
1064 /* DMA Related Functions */
1065 extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
1066 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1067 extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
1068 extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
1069 extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
1070 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1071 extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
1072 extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
1073 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1074 /* Interrupt handling */
1075 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1076 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1077 extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
1078 /* EEPROM access functions */
1079 extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
1080 /* Protocol Control Unit Functions */
1081 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
1082 /* BSSID Functions */
1083 extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
1084 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1085 extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
1086 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1087 /* Receive start/stop functions */
1088 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1089 extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
1090 /* RX Filter functions */
1091 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1092 extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
1093 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1094 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1095 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1096 /* Beacon related functions */
1097 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
1098 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1099 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1100 extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1101 #if 0
1102 extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
1103 extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
1104 extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
1105 #endif
1106 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ath5k_mib_stats *statistics);
1107 /* ACK bit rate */
1108 void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1109 /* ACK/CTS Timeouts */
1110 extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
1111 extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
1112 extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
1113 extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
1114 /* Key table (WEP) functions */
1115 extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1116 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
1117 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
1118 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1119 /* Queue Control Unit, DFS Control Unit Functions */
1120 extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
1121 extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
1122 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
1123 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1124 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1125 extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1126 extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1127 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
1128 /* Hardware Descriptor Functions */
1129 extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
1130 /* GPIO Functions */
1131 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1132 extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1133 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1134 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1135 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1136 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
1137 /* Misc functions */
1138 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
1139
1140
1141 /* Initial register settings functions */
1142 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1143 /* Initialize RF */
1144 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
1145 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
1146 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
1147 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
1148
1149
1150 /* PHY/RF channel functions */
1151 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1152 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1153 /* PHY calibration */
1154 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1155 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1156 /* Misc PHY functions */
1157 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1158 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
1159 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
1160 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
1161 /* TX power setup */
1162 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
1163 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
1164
1165
1166 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1167 {
1168         return ioread32(ah->ah_iobase + reg);
1169 }
1170
1171 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1172 {
1173         iowrite32(val, ah->ah_iobase + reg);
1174 }
1175
1176 #endif