1 /******************************************************************************
3 * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/slab.h>
33 #include <linux/init.h>
35 #include <net/mac80211.h>
37 #include "iwl-eeprom.h"
41 #include "iwl-commands.h"
42 #include "iwl-debug.h"
43 #include "iwl-power.h"
46 * Setting power level allows the card to go to sleep when not busy.
48 * We calculate a sleep command based on the required latency, which
49 * we get from mac80211. In order to handle thermal throttling, we can
50 * also use pre-defined power levels.
54 * This defines the old power levels. They are still used by default
55 * (level 1) and for thermal throttle (levels 3 through 5)
58 struct il_power_vec_entry {
59 struct il_powertable_cmd cmd;
60 u8 no_dtim; /* number of skip dtim */
63 static void il_power_sleep_cam_cmd(struct il_priv *il,
64 struct il_powertable_cmd *cmd)
66 memset(cmd, 0, sizeof(*cmd));
68 if (il->power_data.pci_pm)
69 cmd->flags |= IL_POWER_PCI_PM_MSK;
71 IL_DEBUG_POWER(il, "Sleep command for CAM\n");
75 il_set_power(struct il_priv *il, struct il_powertable_cmd *cmd)
77 IL_DEBUG_POWER(il, "Sending power/sleep command\n");
78 IL_DEBUG_POWER(il, "Flags value = 0x%08X\n", cmd->flags);
79 IL_DEBUG_POWER(il, "Tx timeout = %u\n",
80 le32_to_cpu(cmd->tx_data_timeout));
81 IL_DEBUG_POWER(il, "Rx timeout = %u\n",
82 le32_to_cpu(cmd->rx_data_timeout));
84 "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
85 le32_to_cpu(cmd->sleep_interval[0]),
86 le32_to_cpu(cmd->sleep_interval[1]),
87 le32_to_cpu(cmd->sleep_interval[2]),
88 le32_to_cpu(cmd->sleep_interval[3]),
89 le32_to_cpu(cmd->sleep_interval[4]));
91 return il_send_cmd_pdu(il, POWER_TABLE_CMD,
92 sizeof(struct il_powertable_cmd), cmd);
96 il_power_set_mode(struct il_priv *il, struct il_powertable_cmd *cmd,
102 lockdep_assert_held(&il->mutex);
104 /* Don't update the RX chain when chain noise calibration is running */
105 update_chains = il->chain_noise_data.state == IL_CHAIN_NOISE_DONE ||
106 il->chain_noise_data.state == IL_CHAIN_NOISE_ALIVE;
108 if (!memcmp(&il->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
111 if (!il_is_ready_rf(il))
114 /* scan complete use sleep_power_next, need to be updated */
115 memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
116 if (test_bit(STATUS_SCANNING, &il->status) && !force) {
117 IL_DEBUG_INFO(il, "Defer power set mode while scanning\n");
121 if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)
122 set_bit(STATUS_POWER_PMI, &il->status);
124 ret = il_set_power(il, cmd);
126 if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK))
127 clear_bit(STATUS_POWER_PMI, &il->status);
129 if (il->cfg->ops->lib->update_chain_flags && update_chains)
130 il->cfg->ops->lib->update_chain_flags(il);
131 else if (il->cfg->ops->lib->update_chain_flags)
133 "Cannot update the power, chain noise "
134 "calibration running: %d\n",
135 il->chain_noise_data.state);
137 memcpy(&il->power_data.sleep_cmd, cmd, sizeof(*cmd));
139 IL_ERR(il, "set power fail, ret = %d", ret);
144 int il_power_update_mode(struct il_priv *il, bool force)
146 struct il_powertable_cmd cmd;
148 il_power_sleep_cam_cmd(il, &cmd);
149 return il_power_set_mode(il, &cmd, force);
151 EXPORT_SYMBOL(il_power_update_mode);
153 /* initialize to default */
154 void il_power_initialize(struct il_priv *il)
156 u16 lctl = il_pcie_link_ctl(il);
158 il->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
160 il->power_data.debug_sleep_level_override = -1;
162 memset(&il->power_data.sleep_cmd, 0,
163 sizeof(il->power_data.sleep_cmd));
165 EXPORT_SYMBOL(il_power_initialize);