1 /******************************************************************************
3 * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/slab.h>
33 #include <linux/init.h>
35 #include <net/mac80211.h>
37 #include "iwl-eeprom.h"
42 #include "iwl-commands.h"
43 #include "iwl-debug.h"
44 #include "iwl-power.h"
45 #include "iwl-trans.h"
46 #include "iwl-shared.h"
49 * Setting power level allows the card to go to sleep when not busy.
51 * We calculate a sleep command based on the required latency, which
52 * we get from mac80211. In order to handle thermal throttling, we can
53 * also use pre-defined power levels.
57 * This defines the old power levels. They are still used by default
58 * (level 1) and for thermal throttle (levels 3 through 5)
61 struct iwl_power_vec_entry {
62 struct iwl_powertable_cmd cmd;
63 u8 no_dtim; /* number of skip dtim */
66 #define IWL_DTIM_RANGE_0_MAX 2
67 #define IWL_DTIM_RANGE_1_MAX 10
69 #define NOSLP cpu_to_le16(0), 0, 0
70 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
71 #define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \
72 IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
73 IWL_POWER_ADVANCE_PM_ENA_MSK)
74 #define ASLP_TOUT(T) cpu_to_le32(T)
75 #define TU_TO_USEC 1024
76 #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
77 #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
82 /* default power management (not Tx power) table values */
83 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
85 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
86 {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
87 {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
88 {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
89 {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
90 {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
94 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
96 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
97 {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
98 {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
99 {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
100 {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
101 {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
104 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
106 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
107 {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
108 {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
109 {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
110 {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
111 {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
114 /* advance power management */
116 static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
117 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
118 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
119 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
120 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
121 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
122 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
123 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
124 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
125 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
126 SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
130 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
132 static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
133 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
134 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
135 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
136 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
137 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
138 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
139 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
140 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
141 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
142 SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
145 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
147 static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
148 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
149 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
150 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
151 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
152 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
153 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
154 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
155 SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
156 {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
157 SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
160 static void iwl_static_sleep_cmd(struct iwl_priv *priv,
161 struct iwl_powertable_cmd *cmd,
162 enum iwl_power_level lvl, int period)
164 const struct iwl_power_vec_entry *table;
165 int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
170 if (cfg(priv)->adv_pm) {
172 if (period <= IWL_DTIM_RANGE_1_MAX)
174 if (period <= IWL_DTIM_RANGE_0_MAX)
178 if (period <= IWL_DTIM_RANGE_1_MAX)
180 if (period <= IWL_DTIM_RANGE_0_MAX)
184 if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
185 memset(cmd, 0, sizeof(*cmd));
187 *cmd = table[lvl].cmd;
192 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
196 skip = table[lvl].no_dtim;
197 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
198 max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
199 max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
202 slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
203 /* figure out the listen interval based on dtim period and skip */
204 if (slp_itrvl == 0xFF)
205 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
206 cpu_to_le32(period * (skip + 1));
208 slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
209 if (slp_itrvl > period)
210 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
211 cpu_to_le32((slp_itrvl / period) * period);
214 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
216 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
218 if (cfg(priv)->base_params->shadow_reg_enable)
219 cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
221 cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
223 if (iwl_advanced_bt_coexist(priv)) {
224 if (!cfg(priv)->bt_params->bt_sco_disable)
225 cmd->flags |= IWL_POWER_BT_SCO_ENA;
227 cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
231 slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
232 if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
233 cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
234 cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
236 /* enforce max sleep interval */
237 for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
238 if (le32_to_cpu(cmd->sleep_interval[i]) >
239 (max_sleep[i] * period))
240 cmd->sleep_interval[i] =
241 cpu_to_le32(max_sleep[i] * period);
242 if (i != (IWL_POWER_VEC_SIZE - 1)) {
243 if (le32_to_cpu(cmd->sleep_interval[i]) >
244 le32_to_cpu(cmd->sleep_interval[i+1]))
245 cmd->sleep_interval[i] =
246 cmd->sleep_interval[i+1];
250 if (priv->power_data.bus_pm)
251 cmd->flags |= IWL_POWER_PCI_PM_MSK;
253 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
255 IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
257 IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
260 static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
261 struct iwl_powertable_cmd *cmd)
263 memset(cmd, 0, sizeof(*cmd));
265 if (priv->power_data.bus_pm)
266 cmd->flags |= IWL_POWER_PCI_PM_MSK;
268 IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
271 static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
272 struct iwl_powertable_cmd *cmd,
273 int dynps_ms, int wakeup_period)
276 * These are the original power level 3 sleep successions. The
277 * device may behave better with such succession and was also
278 * only tested with that. Just like the original sleep commands,
279 * also adjust the succession here to the wakeup_period below.
280 * The ranges are the same as for the sleep commands, 0-2, 3-9
281 * and >10, which is selected based on the DTIM interval for
282 * the sleep index but here we use the wakeup period since that
283 * is what we need to do for the latency requirements.
285 static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 };
286 static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 };
287 static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF };
288 const u8 *slp_succ = slp_succ_r0;
291 if (wakeup_period > IWL_DTIM_RANGE_0_MAX)
292 slp_succ = slp_succ_r1;
293 if (wakeup_period > IWL_DTIM_RANGE_1_MAX)
294 slp_succ = slp_succ_r2;
296 memset(cmd, 0, sizeof(*cmd));
298 cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK |
299 IWL_POWER_FAST_PD; /* no use seeing frames for others */
301 if (priv->power_data.bus_pm)
302 cmd->flags |= IWL_POWER_PCI_PM_MSK;
304 if (cfg(priv)->base_params->shadow_reg_enable)
305 cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
307 cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
309 if (iwl_advanced_bt_coexist(priv)) {
310 if (!cfg(priv)->bt_params->bt_sco_disable)
311 cmd->flags |= IWL_POWER_BT_SCO_ENA;
313 cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
316 cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
317 cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
319 for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
320 cmd->sleep_interval[i] =
321 cpu_to_le32(min_t(int, slp_succ[i], wakeup_period));
323 IWL_DEBUG_POWER(priv, "Automatic sleep command\n");
326 static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
328 IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
329 IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
330 IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
331 IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
332 IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
333 le32_to_cpu(cmd->sleep_interval[0]),
334 le32_to_cpu(cmd->sleep_interval[1]),
335 le32_to_cpu(cmd->sleep_interval[2]),
336 le32_to_cpu(cmd->sleep_interval[3]),
337 le32_to_cpu(cmd->sleep_interval[4]));
339 return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, CMD_SYNC,
340 sizeof(struct iwl_powertable_cmd), cmd);
343 static void iwl_power_build_cmd(struct iwl_priv *priv,
344 struct iwl_powertable_cmd *cmd)
346 bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
349 dtimper = priv->hw->conf.ps_dtim_period ?: 1;
352 iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
353 else if (!cfg(priv)->base_params->no_idle_support &&
354 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
355 iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
356 else if (iwl_tt_is_low_power_state(priv)) {
357 /* in thermal throttling low power state */
358 iwl_static_sleep_cmd(priv, cmd,
359 iwl_tt_current_power_mode(priv), dtimper);
361 iwl_power_sleep_cam_cmd(priv, cmd);
362 else if (priv->power_data.debug_sleep_level_override >= 0)
363 iwl_static_sleep_cmd(priv, cmd,
364 priv->power_data.debug_sleep_level_override,
366 else if (iwlagn_mod_params.no_sleep_autoadjust) {
367 if (iwlagn_mod_params.power_level > IWL_POWER_INDEX_1 &&
368 iwlagn_mod_params.power_level <= IWL_POWER_INDEX_5)
369 iwl_static_sleep_cmd(priv, cmd,
370 iwlagn_mod_params.power_level, dtimper);
372 iwl_static_sleep_cmd(priv, cmd,
373 IWL_POWER_INDEX_1, dtimper);
375 iwl_power_fill_sleep_cmd(priv, cmd,
376 priv->hw->conf.dynamic_ps_timeout,
377 priv->hw->conf.max_sleep_period);
380 int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
386 lockdep_assert_held(&priv->mutex);
388 /* Don't update the RX chain when chain noise calibration is running */
389 update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
390 priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
392 if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
395 if (!iwl_is_ready_rf(priv))
398 /* scan complete use sleep_power_next, need to be updated */
399 memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
400 if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
401 IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
405 if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
406 set_bit(STATUS_POWER_PMI, &priv->shrd->status);
408 ret = iwl_set_power(priv, cmd);
410 if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
411 clear_bit(STATUS_POWER_PMI, &priv->shrd->status);
414 iwl_update_chain_flags(priv);
416 IWL_DEBUG_POWER(priv,
417 "Cannot update the power, chain noise "
418 "calibration running: %d\n",
419 priv->chain_noise_data.state);
421 memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
423 IWL_ERR(priv, "set power fail, ret = %d", ret);
428 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
430 struct iwl_powertable_cmd cmd;
432 iwl_power_build_cmd(priv, &cmd);
433 return iwl_power_set_mode(priv, &cmd, force);
436 /* initialize to default */
437 void iwl_power_initialize(struct iwl_priv *priv)
439 priv->power_data.bus_pm = trans(priv)->pm_support;
441 priv->power_data.debug_sleep_level_override = -1;
443 memset(&priv->power_data.sleep_cmd, 0,
444 sizeof(priv->power_data.sleep_cmd));