Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
[cascardo/linux.git] / drivers / net / wireless / iwlwifi / mvm / phy-ctxt.c
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called COPYING.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63
64 #include <net/mac80211.h>
65 #include "fw-api.h"
66 #include "mvm.h"
67
68 /* Maps the driver specific channel width definition to the the fw values */
69 static inline u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef)
70 {
71         switch (chandef->width) {
72         case NL80211_CHAN_WIDTH_20_NOHT:
73         case NL80211_CHAN_WIDTH_20:
74                 return PHY_VHT_CHANNEL_MODE20;
75         case NL80211_CHAN_WIDTH_40:
76                 return PHY_VHT_CHANNEL_MODE40;
77         case NL80211_CHAN_WIDTH_80:
78                 return PHY_VHT_CHANNEL_MODE80;
79         case NL80211_CHAN_WIDTH_160:
80                 return PHY_VHT_CHANNEL_MODE160;
81         default:
82                 WARN(1, "Invalid channel width=%u", chandef->width);
83                 return PHY_VHT_CHANNEL_MODE20;
84         }
85 }
86
87 /*
88  * Maps the driver specific control channel position (relative to the center
89  * freq) definitions to the the fw values
90  */
91 static inline u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef)
92 {
93         switch (chandef->chan->center_freq - chandef->center_freq1) {
94         case -70:
95                 return PHY_VHT_CTRL_POS_4_BELOW;
96         case -50:
97                 return PHY_VHT_CTRL_POS_3_BELOW;
98         case -30:
99                 return PHY_VHT_CTRL_POS_2_BELOW;
100         case -10:
101                 return PHY_VHT_CTRL_POS_1_BELOW;
102         case  10:
103                 return PHY_VHT_CTRL_POS_1_ABOVE;
104         case  30:
105                 return PHY_VHT_CTRL_POS_2_ABOVE;
106         case  50:
107                 return PHY_VHT_CTRL_POS_3_ABOVE;
108         case  70:
109                 return PHY_VHT_CTRL_POS_4_ABOVE;
110         default:
111                 WARN(1, "Invalid channel definition");
112         case 0:
113                 /*
114                  * The FW is expected to check the control channel position only
115                  * when in HT/VHT and the channel width is not 20MHz. Return
116                  * this value as the default one.
117                  */
118                 return PHY_VHT_CTRL_POS_1_BELOW;
119         }
120 }
121
122 /*
123  * Construct the generic fields of the PHY context command
124  */
125 static void iwl_mvm_phy_ctxt_cmd_hdr(struct iwl_mvm_phy_ctxt *ctxt,
126                                      struct iwl_phy_context_cmd *cmd,
127                                      u32 action, u32 apply_time)
128 {
129         memset(cmd, 0, sizeof(struct iwl_phy_context_cmd));
130
131         cmd->id_and_color = cpu_to_le32(FW_CMD_ID_AND_COLOR(ctxt->id,
132                                                             ctxt->color));
133         cmd->action = cpu_to_le32(action);
134         cmd->apply_time = cpu_to_le32(apply_time);
135 }
136
137 /*
138  * Add the phy configuration to the PHY context command
139  */
140 static void iwl_mvm_phy_ctxt_cmd_data(struct iwl_mvm *mvm,
141                                       struct iwl_phy_context_cmd *cmd,
142                                       struct cfg80211_chan_def *chandef,
143                                       u8 chains_static, u8 chains_dynamic)
144 {
145         u8 active_cnt, idle_cnt;
146
147         /* Set the channel info data */
148         cmd->ci.band = (chandef->chan->band == IEEE80211_BAND_2GHZ ?
149               PHY_BAND_24 : PHY_BAND_5);
150
151         cmd->ci.channel = chandef->chan->hw_value;
152         cmd->ci.width = iwl_mvm_get_channel_width(chandef);
153         cmd->ci.ctrl_pos = iwl_mvm_get_ctrl_pos(chandef);
154
155         /* Set rx the chains */
156         idle_cnt = chains_static;
157         active_cnt = chains_dynamic;
158
159         cmd->rxchain_info = cpu_to_le32(iwl_fw_valid_rx_ant(mvm->fw) <<
160                                         PHY_RX_CHAIN_VALID_POS);
161         cmd->rxchain_info |= cpu_to_le32(idle_cnt << PHY_RX_CHAIN_CNT_POS);
162         cmd->rxchain_info |= cpu_to_le32(active_cnt <<
163                                          PHY_RX_CHAIN_MIMO_CNT_POS);
164
165         cmd->txchain_info = cpu_to_le32(iwl_fw_valid_tx_ant(mvm->fw));
166 }
167
168 /*
169  * Send a command to apply the current phy configuration. The command is send
170  * only if something in the configuration changed: in case that this is the
171  * first time that the phy configuration is applied or in case that the phy
172  * configuration changed from the previous apply.
173  */
174 static int iwl_mvm_phy_ctxt_apply(struct iwl_mvm *mvm,
175                                   struct iwl_mvm_phy_ctxt *ctxt,
176                                   struct cfg80211_chan_def *chandef,
177                                   u8 chains_static, u8 chains_dynamic,
178                                   u32 action, u32 apply_time)
179 {
180         struct iwl_phy_context_cmd cmd;
181         int ret;
182
183         /* Set the command header fields */
184         iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, action, apply_time);
185
186         /* Set the command data */
187         iwl_mvm_phy_ctxt_cmd_data(mvm, &cmd, chandef,
188                                   chains_static, chains_dynamic);
189
190         ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC,
191                                    sizeof(struct iwl_phy_context_cmd),
192                                    &cmd);
193         if (ret)
194                 IWL_ERR(mvm, "PHY ctxt cmd error. ret=%d\n", ret);
195         return ret;
196 }
197
198
199 struct phy_ctx_used_data {
200         unsigned long used[BITS_TO_LONGS(NUM_PHY_CTX)];
201 };
202
203 static void iwl_mvm_phy_ctx_used_iter(struct ieee80211_hw *hw,
204                                       struct ieee80211_chanctx_conf *ctx,
205                                       void *_data)
206 {
207         struct phy_ctx_used_data *data = _data;
208         struct iwl_mvm_phy_ctxt *phy_ctxt = (void *)ctx->drv_priv;
209
210         __set_bit(phy_ctxt->id, data->used);
211 }
212
213 /*
214  * Send a command to add a PHY context based on the current HW configuration.
215  */
216 int iwl_mvm_phy_ctxt_add(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
217                          struct cfg80211_chan_def *chandef,
218                          u8 chains_static, u8 chains_dynamic)
219 {
220         struct phy_ctx_used_data data = {
221                 .used = { },
222         };
223
224         /*
225          * If this is a regular PHY context (not the ROC one)
226          * skip the ROC PHY context's ID.
227          */
228         if (ctxt != &mvm->phy_ctxt_roc)
229                 __set_bit(mvm->phy_ctxt_roc.id, data.used);
230
231         lockdep_assert_held(&mvm->mutex);
232         ctxt->color++;
233
234         if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
235                 ieee80211_iter_chan_contexts_atomic(
236                         mvm->hw, iwl_mvm_phy_ctx_used_iter, &data);
237
238                 ctxt->id = find_first_zero_bit(data.used, NUM_PHY_CTX);
239                 if (WARN_ONCE(ctxt->id == NUM_PHY_CTX,
240                               "Failed to init PHY context - no free ID!\n"))
241                         return -EIO;
242         }
243
244         ctxt->channel = chandef->chan;
245         return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
246                                       chains_static, chains_dynamic,
247                                       FW_CTXT_ACTION_ADD, 0);
248 }
249
250 /*
251  * Send a command to modify the PHY context based on the current HW
252  * configuration. Note that the function does not check that the configuration
253  * changed.
254  */
255 int iwl_mvm_phy_ctxt_changed(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt,
256                              struct cfg80211_chan_def *chandef,
257                              u8 chains_static, u8 chains_dynamic)
258 {
259         lockdep_assert_held(&mvm->mutex);
260
261         ctxt->channel = chandef->chan;
262         return iwl_mvm_phy_ctxt_apply(mvm, ctxt, chandef,
263                                       chains_static, chains_dynamic,
264                                       FW_CTXT_ACTION_MODIFY, 0);
265 }
266
267 /*
268  * Send a command to the FW to remove the given phy context.
269  * Once the command is sent, regardless of success or failure, the context is
270  * marked as invalid
271  */
272 void iwl_mvm_phy_ctxt_remove(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)
273 {
274         struct iwl_phy_context_cmd cmd;
275         int ret;
276
277         lockdep_assert_held(&mvm->mutex);
278
279         iwl_mvm_phy_ctxt_cmd_hdr(ctxt, &cmd, FW_CTXT_ACTION_REMOVE, 0);
280         ret = iwl_mvm_send_cmd_pdu(mvm, PHY_CONTEXT_CMD, CMD_SYNC,
281                                    sizeof(struct iwl_phy_context_cmd),
282                                    &cmd);
283         if (ret)
284                 IWL_ERR(mvm, "Failed to send PHY remove: ctxt id=%d\n",
285                         ctxt->id);
286 }