drivers/net/wireless/rt2x00/rt2500pci.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500pci
  23         Abstract: rt2500pci device specific routines.
  24         Supported chipsets: RT2560.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/eeprom_93cx6.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00pci.h"
  37 #include "rt2500pci.h"
  38
  39 /*
  40  * Register access.
  41  * All access to the CSR registers will go through the methods
  42  * rt2x00pci_register_read and rt2x00pci_register_write.
  43  * BBP and RF register require indirect register access,
  44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  45  * These indirect registers work with busy bits,
  46  * and we will try maximal REGISTER_BUSY_COUNT times to access
  47  * the register while taking a REGISTER_BUSY_DELAY us delay
  48  * between each attampt. When the busy bit is still set at that time,
  49  * the access attempt is considered to have failed,
  50  * and we will print an error.
  51  */
  52 static u32 rt2500pci_bbp_check(struct rt2x00_dev *rt2x00dev)
  53 {
  54         u32 reg;
  55         unsigned int i;
  56
  57         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  58                 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
  59                 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
  60                         break;
  61                 udelay(REGISTER_BUSY_DELAY);
  62         }
  63
  64         return reg;
  65 }
  66
  67 static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  68                                 const unsigned int word, const u8 value)
  69 {
  70         u32 reg;
  71
  72         /*
  73          * Wait until the BBP becomes ready.
  74          */
  75         reg = rt2500pci_bbp_check(rt2x00dev);
  76         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
  77                 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
  78                 return;
  79         }
  80
  81         /*
  82          * Write the data into the BBP.
  83          */
  84         reg = 0;
  85         rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
  86         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  87         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  88         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
  89
  90         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  91 }
  92
  93 static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  94                                const unsigned int word, u8 *value)
  95 {
  96         u32 reg;
  97
  98         /*
  99          * Wait until the BBP becomes ready.
 100          */
 101         reg = rt2500pci_bbp_check(rt2x00dev);
 102         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
 103                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
 104                 return;
 105         }
 106
 107         /*
 108          * Write the request into the BBP.
 109          */
 110         reg = 0;
 111         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
 112         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
 113         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
 114
 115         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 116
 117         /*
 118          * Wait until the BBP becomes ready.
 119          */
 120         reg = rt2500pci_bbp_check(rt2x00dev);
 121         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
 122                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
 123                 *value = 0xff;
 124                 return;
 125         }
 126
 127         *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 128 }
 129
 130 static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
 131                                const unsigned int word, const u32 value)
 132 {
 133         u32 reg;
 134         unsigned int i;
 135
 136         if (!word)
 137                 return;
 138
 139         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 140                 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
 141                 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
 142                         goto rf_write;
 143                 udelay(REGISTER_BUSY_DELAY);
 144         }
 145
 146         ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
 147         return;
 148
 149 rf_write:
 150         reg = 0;
 151         rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 152         rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
 153         rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
 154         rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
 155
 156         rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 157         rt2x00_rf_write(rt2x00dev, word, value);
 158 }
 159
 160 static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 161 {
 162         struct rt2x00_dev *rt2x00dev = eeprom->data;
 163         u32 reg;
 164
 165         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
 166
 167         eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
 168         eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
 169         eeprom->reg_data_clock =
 170             !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
 171         eeprom->reg_chip_select =
 172             !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
 173 }
 174
 175 static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 176 {
 177         struct rt2x00_dev *rt2x00dev = eeprom->data;
 178         u32 reg = 0;
 179
 180         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
 181         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
 182         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
 183                            !!eeprom->reg_data_clock);
 184         rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
 185                            !!eeprom->reg_chip_select);
 186
 187         rt2x00pci_register_write(rt2x00dev, CSR21, reg);
 188 }
 189
 190 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 191 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
 192
 193 static void rt2500pci_read_csr(struct rt2x00_dev *rt2x00dev,
 194                                const unsigned int word, u32 *data)
 195 {
 196         rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
 197 }
 198
 199 static void rt2500pci_write_csr(struct rt2x00_dev *rt2x00dev,
 200                                 const unsigned int word, u32 data)
 201 {
 202         rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
 203 }
 204
 205 static const struct rt2x00debug rt2500pci_rt2x00debug = {
 206         .owner  = THIS_MODULE,
 207         .csr    = {
 208                 .read           = rt2500pci_read_csr,
 209                 .write          = rt2500pci_write_csr,
 210                 .word_size      = sizeof(u32),
 211                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 212         },
 213         .eeprom = {
 214                 .read           = rt2x00_eeprom_read,
 215                 .write          = rt2x00_eeprom_write,
 216                 .word_size      = sizeof(u16),
 217                 .word_count     = EEPROM_SIZE / sizeof(u16),
 218         },
 219         .bbp    = {
 220                 .read           = rt2500pci_bbp_read,
 221                 .write          = rt2500pci_bbp_write,
 222                 .word_size      = sizeof(u8),
 223                 .word_count     = BBP_SIZE / sizeof(u8),
 224         },
 225         .rf     = {
 226                 .read           = rt2x00_rf_read,
 227                 .write          = rt2500pci_rf_write,
 228                 .word_size      = sizeof(u32),
 229                 .word_count     = RF_SIZE / sizeof(u32),
 230         },
 231 };
 232 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 233
 234 #ifdef CONFIG_RT2500PCI_RFKILL
 235 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 236 {
 237         u32 reg;
 238
 239         rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 240         return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 241 }
 242 #else
 243 #define rt2500pci_rfkill_poll   NULL
 244 #endif /* CONFIG_RT2500PCI_RFKILL */
 245
 246 #ifdef CONFIG_RT2500PCI_LEDS
 247 static void rt2500pci_led_brightness(struct led_classdev *led_cdev,
 248                                      enum led_brightness brightness)
 249 {
 250         struct rt2x00_led *led =
 251             container_of(led_cdev, struct rt2x00_led, led_dev);
 252         unsigned int enabled = brightness != LED_OFF;
 253         unsigned int activity =
 254             led->rt2x00dev->led_flags & LED_SUPPORT_ACTIVITY;
 255         u32 reg;
 256
 257         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 258
 259         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) {
 260                 rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
 261                 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled && activity);
 262         }
 263
 264         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 265 }
 266 #else
 267 #define rt2500pci_led_brightness        NULL
 268 #endif /* CONFIG_RT2500PCI_LEDS */
 269
 270 /*
 271  * Configuration handlers.
 272  */
 273 static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev,
 274                                     const unsigned int filter_flags)
 275 {
 276         u32 reg;
 277
 278         /*
 279          * Start configuration steps.
 280          * Note that the version error will always be dropped
 281          * and broadcast frames will always be accepted since
 282          * there is no filter for it at this time.
 283          */
 284         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
 285         rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
 286                            !(filter_flags & FIF_FCSFAIL));
 287         rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
 288                            !(filter_flags & FIF_PLCPFAIL));
 289         rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
 290                            !(filter_flags & FIF_CONTROL));
 291         rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
 292                            !(filter_flags & FIF_PROMISC_IN_BSS));
 293         rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
 294                            !(filter_flags & FIF_PROMISC_IN_BSS));
 295         rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
 296         rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
 297                            !(filter_flags & FIF_ALLMULTI));
 298         rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
 299         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
 300 }
 301
 302 static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
 303                                   struct rt2x00_intf *intf,
 304                                   struct rt2x00intf_conf *conf,
 305                                   const unsigned int flags)
 306 {
 307         struct data_queue *queue =
 308             rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON);
 309         unsigned int bcn_preload;
 310         u32 reg;
 311
 312         if (flags & CONFIG_UPDATE_TYPE) {
 313                 /*
 314                  * Enable beacon config
 315                  */
 316                 bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
 317                 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
 318                 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
 319                 rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN, queue->cw_min);
 320                 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
 321
 322                 /*
 323                  * Enable synchronisation.
 324                  */
 325                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 326                 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
 327                 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
 328                 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
 329                 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 330         }
 331
 332         if (flags & CONFIG_UPDATE_MAC)
 333                 rt2x00pci_register_multiwrite(rt2x00dev, CSR3,
 334                                               conf->mac, sizeof(conf->mac));
 335
 336         if (flags & CONFIG_UPDATE_BSSID)
 337                 rt2x00pci_register_multiwrite(rt2x00dev, CSR5,
 338                                               conf->bssid, sizeof(conf->bssid));
 339 }
 340
 341 static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 342                                  struct rt2x00lib_erp *erp)
 343 {
 344         int preamble_mask;
 345         u32 reg;
 346
 347         /*
 348          * When short preamble is enabled, we should set bit 0x08
 349          */
 350         preamble_mask = erp->short_preamble << 3;
 351
 352         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 353         rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
 354                            erp->ack_timeout);
 355         rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 356                            erp->ack_consume_time);
 357         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 358
 359         rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
 360         rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00 | preamble_mask);
 361         rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
 362         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
 363         rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
 364
 365         rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
 366         rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
 367         rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
 368         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
 369         rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
 370
 371         rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
 372         rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
 373         rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
 374         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
 375         rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
 376
 377         rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
 378         rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
 379         rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
 380         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
 381         rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
 382 }
 383
 384 static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev,
 385                                      const int basic_rate_mask)
 386 {
 387         rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask);
 388 }
 389
 390 static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
 391                                      struct rf_channel *rf, const int txpower)
 392 {
 393         u8 r70;
 394
 395         /*
 396          * Set TXpower.
 397          */
 398         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 399
 400         /*
 401          * Switch on tuning bits.
 402          * For RT2523 devices we do not need to update the R1 register.
 403          */
 404         if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
 405                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
 406         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 407
 408         /*
 409          * For RT2525 we should first set the channel to half band higher.
 410          */
 411         if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
 412                 static const u32 vals[] = {
 413                         0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
 414                         0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
 415                         0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
 416                         0x00080d2e, 0x00080d3a
 417                 };
 418
 419                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 420                 rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 421                 rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 422                 if (rf->rf4)
 423                         rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 424         }
 425
 426         rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 427         rt2500pci_rf_write(rt2x00dev, 2, rf->rf2);
 428         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 429         if (rf->rf4)
 430                 rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 431
 432         /*
 433          * Channel 14 requires the Japan filter bit to be set.
 434          */
 435         r70 = 0x46;
 436         rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14);
 437         rt2500pci_bbp_write(rt2x00dev, 70, r70);
 438
 439         msleep(1);
 440
 441         /*
 442          * Switch off tuning bits.
 443          * For RT2523 devices we do not need to update the R1 register.
 444          */
 445         if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
 446                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
 447                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 448         }
 449
 450         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
 451         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 452
 453         /*
 454          * Clear false CRC during channel switch.
 455          */
 456         rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
 457 }
 458
 459 static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 460                                      const int txpower)
 461 {
 462         u32 rf3;
 463
 464         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 465         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 466         rt2500pci_rf_write(rt2x00dev, 3, rf3);
 467 }
 468
 469 static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
 470                                      struct antenna_setup *ant)
 471 {
 472         u32 reg;
 473         u8 r14;
 474         u8 r2;
 475
 476         /*
 477          * We should never come here because rt2x00lib is supposed
 478          * to catch this and send us the correct antenna explicitely.
 479          */
 480         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 481                ant->tx == ANTENNA_SW_DIVERSITY);
 482
 483         rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
 484         rt2500pci_bbp_read(rt2x00dev, 14, &r14);
 485         rt2500pci_bbp_read(rt2x00dev, 2, &r2);
 486
 487         /*
 488          * Configure the TX antenna.
 489          */
 490         switch (ant->tx) {
 491         case ANTENNA_A:
 492                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 493                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
 494                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
 495                 break;
 496         case ANTENNA_B:
 497         default:
 498                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 499                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
 500                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
 501                 break;
 502         }
 503
 504         /*
 505          * Configure the RX antenna.
 506          */
 507         switch (ant->rx) {
 508         case ANTENNA_A:
 509                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 510                 break;
 511         case ANTENNA_B:
 512         default:
 513                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 514                 break;
 515         }
 516
 517         /*
 518          * RT2525E and RT5222 need to flip TX I/Q
 519          */
 520         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 521             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 522                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 523                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
 524                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
 525
 526                 /*
 527                  * RT2525E does not need RX I/Q Flip.
 528                  */
 529                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 530                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 531         } else {
 532                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
 533                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
 534         }
 535
 536         rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
 537         rt2500pci_bbp_write(rt2x00dev, 14, r14);
 538         rt2500pci_bbp_write(rt2x00dev, 2, r2);
 539 }
 540
 541 static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
 542                                       struct rt2x00lib_conf *libconf)
 543 {
 544         u32 reg;
 545
 546         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 547         rt2x00_set_field32(&reg, CSR11_SLOT_TIME, libconf->slot_time);
 548         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 549
 550         rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 551         rt2x00_set_field32(&reg, CSR18_SIFS, libconf->sifs);
 552         rt2x00_set_field32(&reg, CSR18_PIFS, libconf->pifs);
 553         rt2x00pci_register_write(rt2x00dev, CSR18, reg);
 554
 555         rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
 556         rt2x00_set_field32(&reg, CSR19_DIFS, libconf->difs);
 557         rt2x00_set_field32(&reg, CSR19_EIFS, libconf->eifs);
 558         rt2x00pci_register_write(rt2x00dev, CSR19, reg);
 559
 560         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 561         rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 562         rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 563         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 564
 565         rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
 566         rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
 567                            libconf->conf->beacon_int * 16);
 568         rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
 569                            libconf->conf->beacon_int * 16);
 570         rt2x00pci_register_write(rt2x00dev, CSR12, reg);
 571 }
 572
 573 static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
 574                              struct rt2x00lib_conf *libconf,
 575                              const unsigned int flags)
 576 {
 577         if (flags & CONFIG_UPDATE_PHYMODE)
 578                 rt2500pci_config_phymode(rt2x00dev, libconf->basic_rates);
 579         if (flags & CONFIG_UPDATE_CHANNEL)
 580                 rt2500pci_config_channel(rt2x00dev, &libconf->rf,
 581                                          libconf->conf->power_level);
 582         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 583                 rt2500pci_config_txpower(rt2x00dev,
 584                                          libconf->conf->power_level);
 585         if (flags & CONFIG_UPDATE_ANTENNA)
 586                 rt2500pci_config_antenna(rt2x00dev, &libconf->ant);
 587         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 588                 rt2500pci_config_duration(rt2x00dev, libconf);
 589 }
 590
 591 /*
 592  * Link tuning
 593  */
 594 static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev,
 595                                  struct link_qual *qual)
 596 {
 597         u32 reg;
 598
 599         /*
 600          * Update FCS error count from register.
 601          */
 602         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 603         qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
 604
 605         /*
 606          * Update False CCA count from register.
 607          */
 608         rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
 609         qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
 610 }
 611
 612 static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
 613 {
 614         rt2500pci_bbp_write(rt2x00dev, 17, 0x48);
 615         rt2x00dev->link.vgc_level = 0x48;
 616 }
 617
 618 static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 619 {
 620         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 621         u8 r17;
 622
 623         /*
 624          * To prevent collisions with MAC ASIC on chipsets
 625          * up to version C the link tuning should halt after 20
 626          * seconds while being associated.
 627          */
 628         if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
 629             rt2x00dev->intf_associated &&
 630             rt2x00dev->link.count > 20)
 631                 return;
 632
 633         rt2500pci_bbp_read(rt2x00dev, 17, &r17);
 634
 635         /*
 636          * Chipset versions C and lower should directly continue
 637          * to the dynamic CCA tuning. Chipset version D and higher
 638          * should go straight to dynamic CCA tuning when they
 639          * are not associated.
 640          */
 641         if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
 642             !rt2x00dev->intf_associated)
 643                 goto dynamic_cca_tune;
 644
 645         /*
 646          * A too low RSSI will cause too much false CCA which will
 647          * then corrupt the R17 tuning. To remidy this the tuning should
 648          * be stopped (While making sure the R17 value will not exceed limits)
 649          */
 650         if (rssi < -80 && rt2x00dev->link.count > 20) {
 651                 if (r17 >= 0x41) {
 652                         r17 = rt2x00dev->link.vgc_level;
 653                         rt2500pci_bbp_write(rt2x00dev, 17, r17);
 654                 }
 655                 return;
 656         }
 657
 658         /*
 659          * Special big-R17 for short distance
 660          */
 661         if (rssi >= -58) {
 662                 if (r17 != 0x50)
 663                         rt2500pci_bbp_write(rt2x00dev, 17, 0x50);
 664                 return;
 665         }
 666
 667         /*
 668          * Special mid-R17 for middle distance
 669          */
 670         if (rssi >= -74) {
 671                 if (r17 != 0x41)
 672                         rt2500pci_bbp_write(rt2x00dev, 17, 0x41);
 673                 return;
 674         }
 675
 676         /*
 677          * Leave short or middle distance condition, restore r17
 678          * to the dynamic tuning range.
 679          */
 680         if (r17 >= 0x41) {
 681                 rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level);
 682                 return;
 683         }
 684
 685 dynamic_cca_tune:
 686
 687         /*
 688          * R17 is inside the dynamic tuning range,
 689          * start tuning the link based on the false cca counter.
 690          */
 691         if (rt2x00dev->link.qual.false_cca > 512 && r17 < 0x40) {
 692                 rt2500pci_bbp_write(rt2x00dev, 17, ++r17);
 693                 rt2x00dev->link.vgc_level = r17;
 694         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > 0x32) {
 695                 rt2500pci_bbp_write(rt2x00dev, 17, --r17);
 696                 rt2x00dev->link.vgc_level = r17;
 697         }
 698 }
 699
 700 /*
 701  * Initialization functions.
 702  */
 703 static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
 704                                    struct queue_entry *entry)
 705 {
 706         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
 707         u32 word;
 708
 709         rt2x00_desc_read(priv_rx->desc, 1, &word);
 710         rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma);
 711         rt2x00_desc_write(priv_rx->desc, 1, word);
 712
 713         rt2x00_desc_read(priv_rx->desc, 0, &word);
 714         rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
 715         rt2x00_desc_write(priv_rx->desc, 0, word);
 716 }
 717
 718 static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev,
 719                                    struct queue_entry *entry)
 720 {
 721         struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
 722         u32 word;
 723
 724         rt2x00_desc_read(priv_tx->desc, 1, &word);
 725         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma);
 726         rt2x00_desc_write(priv_tx->desc, 1, word);
 727
 728         rt2x00_desc_read(priv_tx->desc, 0, &word);
 729         rt2x00_set_field32(&word, TXD_W0_VALID, 0);
 730         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
 731         rt2x00_desc_write(priv_tx->desc, 0, word);
 732 }
 733
 734 static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
 735 {
 736         struct queue_entry_priv_pci_rx *priv_rx;
 737         struct queue_entry_priv_pci_tx *priv_tx;
 738         u32 reg;
 739
 740         /*
 741          * Initialize registers.
 742          */
 743         rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
 744         rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
 745         rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
 746         rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit);
 747         rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
 748         rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
 749
 750         priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
 751         rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
 752         rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
 753                            priv_tx->desc_dma);
 754         rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
 755
 756         priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
 757         rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
 758         rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
 759                            priv_tx->desc_dma);
 760         rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
 761
 762         priv_tx = rt2x00dev->bcn[1].entries[0].priv_data;
 763         rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
 764         rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
 765                            priv_tx->desc_dma);
 766         rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
 767
 768         priv_tx = rt2x00dev->bcn[0].entries[0].priv_data;
 769         rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
 770         rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
 771                            priv_tx->desc_dma);
 772         rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
 773
 774         rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
 775         rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
 776         rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
 777         rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
 778
 779         priv_rx = rt2x00dev->rx->entries[0].priv_data;
 780         rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
 781         rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER, priv_rx->desc_dma);
 782         rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
 783
 784         return 0;
 785 }
 786
 787 static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
 788 {
 789         u32 reg;
 790
 791         rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
 792         rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
 793         rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
 794         rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
 795
 796         rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
 797         rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
 798         rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
 799         rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
 800         rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
 801
 802         rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
 803         rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
 804                            rt2x00dev->rx->data_size / 128);
 805         rt2x00pci_register_write(rt2x00dev, CSR9, reg);
 806
 807         /*
 808          * Always use CWmin and CWmax set in descriptor.
 809          */
 810         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 811         rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
 812         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 813
 814         rt2x00pci_register_read(rt2x00dev, LEDCSR, &reg);
 815         rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, 70);
 816         rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, 30);
 817         rt2x00pci_register_write(rt2x00dev, LEDCSR, reg);
 818
 819         rt2x00pci_register_write(rt2x00dev, CNT3, 0);
 820
 821         rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
 822         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
 823         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
 824         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
 825         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
 826         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
 827         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
 828         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
 829         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
 830         rt2x00pci_register_write(rt2x00dev, TXCSR8, reg);
 831
 832         rt2x00pci_register_read(rt2x00dev, ARTCSR0, &reg);
 833         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
 834         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
 835         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
 836         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
 837         rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg);
 838
 839         rt2x00pci_register_read(rt2x00dev, ARTCSR1, &reg);
 840         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
 841         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
 842         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
 843         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
 844         rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg);
 845
 846         rt2x00pci_register_read(rt2x00dev, ARTCSR2, &reg);
 847         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
 848         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
 849         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
 850         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
 851         rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg);
 852
 853         rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
 854         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
 855         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
 856         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
 857         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
 858         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
 859         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
 860         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
 861         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
 862         rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
 863
 864         rt2x00pci_register_read(rt2x00dev, PCICSR, &reg);
 865         rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
 866         rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
 867         rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
 868         rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
 869         rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
 870         rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
 871         rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
 872         rt2x00pci_register_write(rt2x00dev, PCICSR, reg);
 873
 874         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
 875
 876         rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
 877         rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
 878
 879         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 880                 return -EBUSY;
 881
 882         rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
 883         rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
 884
 885         rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
 886         rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
 887         rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
 888
 889         rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
 890         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
 891         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
 892         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
 893         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
 894         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
 895         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
 896         rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
 897
 898         rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
 899
 900         rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
 901
 902         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 903         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
 904         rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
 905         rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
 906         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 907
 908         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 909         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
 910         rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
 911         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 912
 913         /*
 914          * We must clear the FCS and FIFO error count.
 915          * These registers are cleared on read,
 916          * so we may pass a useless variable to store the value.
 917          */
 918         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 919         rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
 920
 921         return 0;
 922 }
 923
 924 static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 925 {
 926         unsigned int i;
 927         u16 eeprom;
 928         u8 reg_id;
 929         u8 value;
 930
 931         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 932                 rt2500pci_bbp_read(rt2x00dev, 0, &value);
 933                 if ((value != 0xff) && (value != 0x00))
 934                         goto continue_csr_init;
 935                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
 936                 udelay(REGISTER_BUSY_DELAY);
 937         }
 938
 939         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 940         return -EACCES;
 941
 942 continue_csr_init:
 943         rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
 944         rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
 945         rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
 946         rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
 947         rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
 948         rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
 949         rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
 950         rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
 951         rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
 952         rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
 953         rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
 954         rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
 955         rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
 956         rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
 957         rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
 958         rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
 959         rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
 960         rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
 961         rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
 962         rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
 963         rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
 964         rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
 965         rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
 966         rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
 967         rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
 968         rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
 969         rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
 970         rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
 971         rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
 972         rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
 973
 974         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 975                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 976
 977                 if (eeprom != 0xffff && eeprom != 0x0000) {
 978                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 979                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 980                         rt2500pci_bbp_write(rt2x00dev, reg_id, value);
 981                 }
 982         }
 983
 984         return 0;
 985 }
 986
 987 /*
 988  * Device state switch handlers.
 989  */
 990 static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
 991                                 enum dev_state state)
 992 {
 993         u32 reg;
 994
 995         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
 996         rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
 997                            state == STATE_RADIO_RX_OFF);
 998         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
 999 }
1000
1001 static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1002                                  enum dev_state state)
1003 {
1004         int mask = (state == STATE_RADIO_IRQ_OFF);
1005         u32 reg;
1006
1007         /*
1008          * When interrupts are being enabled, the interrupt registers
1009          * should clear the register to assure a clean state.
1010          */
1011         if (state == STATE_RADIO_IRQ_ON) {
1012                 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1013                 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1014         }
1015
1016         /*
1017          * Only toggle the interrupts bits we are going to use.
1018          * Non-checked interrupt bits are disabled by default.
1019          */
1020         rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1021         rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
1022         rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
1023         rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
1024         rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
1025         rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
1026         rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1027 }
1028
1029 static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1030 {
1031         /*
1032          * Initialize all registers.
1033          */
1034         if (rt2500pci_init_queues(rt2x00dev) ||
1035             rt2500pci_init_registers(rt2x00dev) ||
1036             rt2500pci_init_bbp(rt2x00dev)) {
1037                 ERROR(rt2x00dev, "Register initialization failed.\n");
1038                 return -EIO;
1039         }
1040
1041         /*
1042          * Enable interrupts.
1043          */
1044         rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
1045
1046         return 0;
1047 }
1048
1049 static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1050 {
1051         u32 reg;
1052
1053         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1054
1055         /*
1056          * Disable synchronisation.
1057          */
1058         rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1059
1060         /*
1061          * Cancel RX and TX.
1062          */
1063         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1064         rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1065         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1066
1067         /*
1068          * Disable interrupts.
1069          */
1070         rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
1071 }
1072
1073 static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
1074                                enum dev_state state)
1075 {
1076         u32 reg;
1077         unsigned int i;
1078         char put_to_sleep;
1079         char bbp_state;
1080         char rf_state;
1081
1082         put_to_sleep = (state != STATE_AWAKE);
1083
1084         rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1085         rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1086         rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1087         rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1088         rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1089         rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1090
1091         /*
1092          * Device is not guaranteed to be in the requested state yet.
1093          * We must wait until the register indicates that the
1094          * device has entered the correct state.
1095          */
1096         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1097                 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1098                 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1099                 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1100                 if (bbp_state == state && rf_state == state)
1101                         return 0;
1102                 msleep(10);
1103         }
1104
1105         NOTICE(rt2x00dev, "Device failed to enter state %d, "
1106                "current device state: bbp %d and rf %d.\n",
1107                state, bbp_state, rf_state);
1108
1109         return -EBUSY;
1110 }
1111
1112 static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1113                                       enum dev_state state)
1114 {
1115         int retval = 0;
1116
1117         switch (state) {
1118         case STATE_RADIO_ON:
1119                 retval = rt2500pci_enable_radio(rt2x00dev);
1120                 break;
1121         case STATE_RADIO_OFF:
1122                 rt2500pci_disable_radio(rt2x00dev);
1123                 break;
1124         case STATE_RADIO_RX_ON:
1125         case STATE_RADIO_RX_ON_LINK:
1126                 rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
1127                 break;
1128         case STATE_RADIO_RX_OFF:
1129         case STATE_RADIO_RX_OFF_LINK:
1130                 rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
1131                 break;
1132         case STATE_DEEP_SLEEP:
1133         case STATE_SLEEP:
1134         case STATE_STANDBY:
1135         case STATE_AWAKE:
1136                 retval = rt2500pci_set_state(rt2x00dev, state);
1137                 break;
1138         default:
1139                 retval = -ENOTSUPP;
1140                 break;
1141         }
1142
1143         return retval;
1144 }
1145
1146 /*
1147  * TX descriptor initialization
1148  */
1149 static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1150                                     struct sk_buff *skb,
1151                                     struct txentry_desc *txdesc,
1152                                     struct ieee80211_tx_control *control)
1153 {
1154         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1155         __le32 *txd = skbdesc->desc;
1156         u32 word;
1157
1158         /*
1159          * Start writing the descriptor words.
1160          */
1161         rt2x00_desc_read(txd, 2, &word);
1162         rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
1163         rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs);
1164         rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min);
1165         rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max);
1166         rt2x00_desc_write(txd, 2, word);
1167
1168         rt2x00_desc_read(txd, 3, &word);
1169         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal);
1170         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service);
1171         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, txdesc->length_low);
1172         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, txdesc->length_high);
1173         rt2x00_desc_write(txd, 3, word);
1174
1175         rt2x00_desc_read(txd, 10, &word);
1176         rt2x00_set_field32(&word, TXD_W10_RTS,
1177                            test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
1178         rt2x00_desc_write(txd, 10, word);
1179
1180         rt2x00_desc_read(txd, 0, &word);
1181         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1182         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1183         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1184                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1185         rt2x00_set_field32(&word, TXD_W0_ACK,
1186                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1187         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1188                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1189         rt2x00_set_field32(&word, TXD_W0_OFDM,
1190                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1191         rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
1192         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1193         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1194                            !!(control->flags &
1195                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1196         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
1197         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1198         rt2x00_desc_write(txd, 0, word);
1199 }
1200
1201 /*
1202  * TX data initialization
1203  */
1204 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1205                                     const unsigned int queue)
1206 {
1207         u32 reg;
1208
1209         if (queue == RT2X00_BCN_QUEUE_BEACON) {
1210                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1211                 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1212                         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
1213                         rt2x00_set_field32(&reg, CSR14_TBCN, 1);
1214                         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1215                         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1216                 }
1217                 return;
1218         }
1219
1220         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1221         rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO,
1222                            (queue == IEEE80211_TX_QUEUE_DATA0));
1223         rt2x00_set_field32(&reg, TXCSR0_KICK_TX,
1224                            (queue == IEEE80211_TX_QUEUE_DATA1));
1225         rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM,
1226                            (queue == RT2X00_BCN_QUEUE_ATIM));
1227         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1228 }
1229
1230 /*
1231  * RX control handlers
1232  */
1233 static void rt2500pci_fill_rxdone(struct queue_entry *entry,
1234                                   struct rxdone_entry_desc *rxdesc)
1235 {
1236         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
1237         u32 word0;
1238         u32 word2;
1239
1240         rt2x00_desc_read(priv_rx->desc, 0, &word0);
1241         rt2x00_desc_read(priv_rx->desc, 2, &word2);
1242
1243         rxdesc->flags = 0;
1244         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1245                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1246         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1247                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1248
1249         /*
1250          * Obtain the status about this packet.
1251          * When frame was received with an OFDM bitrate,
1252          * the signal is the PLCP value. If it was received with
1253          * a CCK bitrate the signal is the rate in 100kbit/s.
1254          */
1255         rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1256         rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1257             entry->queue->rt2x00dev->rssi_offset;
1258         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1259
1260         rxdesc->dev_flags = 0;
1261         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1262                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1263         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1264                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1265 }
1266
1267 /*
1268  * Interrupt functions.
1269  */
1270 static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
1271                              const enum ieee80211_tx_queue queue_idx)
1272 {
1273         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
1274         struct queue_entry_priv_pci_tx *priv_tx;
1275         struct queue_entry *entry;
1276         struct txdone_entry_desc txdesc;
1277         u32 word;
1278
1279         while (!rt2x00queue_empty(queue)) {
1280                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1281                 priv_tx = entry->priv_data;
1282                 rt2x00_desc_read(priv_tx->desc, 0, &word);
1283
1284                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1285                     !rt2x00_get_field32(word, TXD_W0_VALID))
1286                         break;
1287
1288                 /*
1289                  * Obtain the status about this packet.
1290                  */
1291                 txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT);
1292                 txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1293
1294                 rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
1295         }
1296 }
1297
1298 static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
1299 {
1300         struct rt2x00_dev *rt2x00dev = dev_instance;
1301         u32 reg;
1302
1303         /*
1304          * Get the interrupt sources & saved to local variable.
1305          * Write register value back to clear pending interrupts.
1306          */
1307         rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1308         rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1309
1310         if (!reg)
1311                 return IRQ_NONE;
1312
1313         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1314                 return IRQ_HANDLED;
1315
1316         /*
1317          * Handle interrupts, walk through all bits
1318          * and run the tasks, the bits are checked in order of
1319          * priority.
1320          */
1321
1322         /*
1323          * 1 - Beacon timer expired interrupt.
1324          */
1325         if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1326                 rt2x00lib_beacondone(rt2x00dev);
1327
1328         /*
1329          * 2 - Rx ring done interrupt.
1330          */
1331         if (rt2x00_get_field32(reg, CSR7_RXDONE))
1332                 rt2x00pci_rxdone(rt2x00dev);
1333
1334         /*
1335          * 3 - Atim ring transmit done interrupt.
1336          */
1337         if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1338                 rt2500pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
1339
1340         /*
1341          * 4 - Priority ring transmit done interrupt.
1342          */
1343         if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1344                 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1345
1346         /*
1347          * 5 - Tx ring transmit done interrupt.
1348          */
1349         if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1350                 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1351
1352         return IRQ_HANDLED;
1353 }
1354
1355 /*
1356  * Device probe functions.
1357  */
1358 static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1359 {
1360         struct eeprom_93cx6 eeprom;
1361         u32 reg;
1362         u16 word;
1363         u8 *mac;
1364
1365         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1366
1367         eeprom.data = rt2x00dev;
1368         eeprom.register_read = rt2500pci_eepromregister_read;
1369         eeprom.register_write = rt2500pci_eepromregister_write;
1370         eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1371             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1372         eeprom.reg_data_in = 0;
1373         eeprom.reg_data_out = 0;
1374         eeprom.reg_data_clock = 0;
1375         eeprom.reg_chip_select = 0;
1376
1377         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1378                                EEPROM_SIZE / sizeof(u16));
1379
1380         /*
1381          * Start validation of the data that has been read.
1382          */
1383         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1384         if (!is_valid_ether_addr(mac)) {
1385                 DECLARE_MAC_BUF(macbuf);
1386
1387                 random_ether_addr(mac);
1388                 EEPROM(rt2x00dev, "MAC: %s\n",
1389                        print_mac(macbuf, mac));
1390         }
1391
1392         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1393         if (word == 0xffff) {
1394                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1395                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1396                                    ANTENNA_SW_DIVERSITY);
1397                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1398                                    ANTENNA_SW_DIVERSITY);
1399                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1400                                    LED_MODE_DEFAULT);
1401                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1402                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1403                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1404                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1405                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1406         }
1407
1408         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1409         if (word == 0xffff) {
1410                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1411                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1412                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1413                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1414                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1415         }
1416
1417         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1418         if (word == 0xffff) {
1419                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1420                                    DEFAULT_RSSI_OFFSET);
1421                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1422                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1423         }
1424
1425         return 0;
1426 }
1427
1428 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1429 {
1430         u32 reg;
1431         u16 value;
1432         u16 eeprom;
1433
1434         /*
1435          * Read EEPROM word for configuration.
1436          */
1437         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1438
1439         /*
1440          * Identify RF chipset.
1441          */
1442         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1443         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1444         rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
1445
1446         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1447             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1448             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1449             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1450             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1451             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1452                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1453                 return -ENODEV;
1454         }
1455
1456         /*
1457          * Identify default antenna configuration.
1458          */
1459         rt2x00dev->default_ant.tx =
1460             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1461         rt2x00dev->default_ant.rx =
1462             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1463
1464         /*
1465          * Store led mode, for correct led behaviour.
1466          */
1467 #ifdef CONFIG_RT2500PCI_LEDS
1468         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1469
1470         switch (value) {
1471         case LED_MODE_ASUS:
1472         case LED_MODE_ALPHA:
1473         case LED_MODE_DEFAULT:
1474                 rt2x00dev->led_flags = LED_SUPPORT_RADIO;
1475                 break;
1476         case LED_MODE_TXRX_ACTIVITY:
1477                 rt2x00dev->led_flags =
1478                     LED_SUPPORT_RADIO | LED_SUPPORT_ACTIVITY;
1479                 break;
1480         case LED_MODE_SIGNAL_STRENGTH:
1481                 rt2x00dev->led_flags = LED_SUPPORT_RADIO;
1482                 break;
1483         }
1484 #endif /* CONFIG_RT2500PCI_LEDS */
1485
1486         /*
1487          * Detect if this device has an hardware controlled radio.
1488          */
1489 #ifdef CONFIG_RT2500PCI_RFKILL
1490         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1491                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1492 #endif /* CONFIG_RT2500PCI_RFKILL */
1493
1494         /*
1495          * Check if the BBP tuning should be enabled.
1496          */
1497         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1498
1499         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1500                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1501
1502         /*
1503          * Read the RSSI <-> dBm offset information.
1504          */
1505         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1506         rt2x00dev->rssi_offset =
1507             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1508
1509         return 0;
1510 }
1511
1512 /*
1513  * RF value list for RF2522
1514  * Supports: 2.4 GHz
1515  */
1516 static const struct rf_channel rf_vals_bg_2522[] = {
1517         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1518         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1519         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1520         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1521         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1522         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1523         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1524         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1525         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1526         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1527         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1528         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1529         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1530         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1531 };
1532
1533 /*
1534  * RF value list for RF2523
1535  * Supports: 2.4 GHz
1536  */
1537 static const struct rf_channel rf_vals_bg_2523[] = {
1538         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1539         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1540         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1541         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1542         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1543         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1544         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1545         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1546         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1547         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1548         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1549         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1550         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1551         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1552 };
1553
1554 /*
1555  * RF value list for RF2524
1556  * Supports: 2.4 GHz
1557  */
1558 static const struct rf_channel rf_vals_bg_2524[] = {
1559         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1560         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1561         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1562         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1563         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1564         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1565         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1566         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1567         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1568         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1569         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1570         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1571         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1572         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1573 };
1574
1575 /*
1576  * RF value list for RF2525
1577  * Supports: 2.4 GHz
1578  */
1579 static const struct rf_channel rf_vals_bg_2525[] = {
1580         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1581         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1582         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1583         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1584         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1585         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1586         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1587         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1588         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1589         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1590         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1591         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1592         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1593         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1594 };
1595
1596 /*
1597  * RF value list for RF2525e
1598  * Supports: 2.4 GHz
1599  */
1600 static const struct rf_channel rf_vals_bg_2525e[] = {
1601         { 1,  0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
1602         { 2,  0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
1603         { 3,  0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
1604         { 4,  0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
1605         { 5,  0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
1606         { 6,  0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
1607         { 7,  0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
1608         { 8,  0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
1609         { 9,  0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
1610         { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
1611         { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
1612         { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
1613         { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
1614         { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
1615 };
1616
1617 /*
1618  * RF value list for RF5222
1619  * Supports: 2.4 GHz & 5.2 GHz
1620  */
1621 static const struct rf_channel rf_vals_5222[] = {
1622         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1623         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1624         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1625         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1626         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1627         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1628         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1629         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1630         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1631         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1632         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1633         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1634         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1635         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1636
1637         /* 802.11 UNI / HyperLan 2 */
1638         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1639         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1640         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1641         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1642         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1643         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1644         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1645         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1646
1647         /* 802.11 HyperLan 2 */
1648         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1649         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1650         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1651         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1652         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1653         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1654         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1655         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1656         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1657         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1658
1659         /* 802.11 UNII */
1660         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1661         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1662         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1663         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1664         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1665 };
1666
1667 static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1668 {
1669         struct hw_mode_spec *spec = &rt2x00dev->spec;
1670         u8 *txpower;
1671         unsigned int i;
1672
1673         /*
1674          * Initialize all hw fields.
1675          */
1676         rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1677         rt2x00dev->hw->extra_tx_headroom = 0;
1678         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1679         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1680         rt2x00dev->hw->queues = 2;
1681
1682         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
1683         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1684                                 rt2x00_eeprom_addr(rt2x00dev,
1685                                                    EEPROM_MAC_ADDR_0));
1686
1687         /*
1688          * Convert tx_power array in eeprom.
1689          */
1690         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1691         for (i = 0; i < 14; i++)
1692                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1693
1694         /*
1695          * Initialize hw_mode information.
1696          */
1697         spec->supported_bands = SUPPORT_BAND_2GHZ;
1698         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1699         spec->tx_power_a = NULL;
1700         spec->tx_power_bg = txpower;
1701         spec->tx_power_default = DEFAULT_TXPOWER;
1702
1703         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1704                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1705                 spec->channels = rf_vals_bg_2522;
1706         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1707                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1708                 spec->channels = rf_vals_bg_2523;
1709         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1710                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1711                 spec->channels = rf_vals_bg_2524;
1712         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1713                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1714                 spec->channels = rf_vals_bg_2525;
1715         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1716                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1717                 spec->channels = rf_vals_bg_2525e;
1718         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1719                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1720                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1721                 spec->channels = rf_vals_5222;
1722         }
1723 }
1724
1725 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1726 {
1727         int retval;
1728
1729         /*
1730          * Allocate eeprom data.
1731          */
1732         retval = rt2500pci_validate_eeprom(rt2x00dev);
1733         if (retval)
1734                 return retval;
1735
1736         retval = rt2500pci_init_eeprom(rt2x00dev);
1737         if (retval)
1738                 return retval;
1739
1740         /*
1741          * Initialize hw specifications.
1742          */
1743         rt2500pci_probe_hw_mode(rt2x00dev);
1744
1745         /*
1746          * This device requires the atim queue
1747          */
1748         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1749
1750         /*
1751          * Set the rssi offset.
1752          */
1753         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1754
1755         return 0;
1756 }
1757
1758 /*
1759  * IEEE80211 stack callback functions.
1760  */
1761 static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw,
1762                                      u32 short_retry, u32 long_retry)
1763 {
1764         struct rt2x00_dev *rt2x00dev = hw->priv;
1765         u32 reg;
1766
1767         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1768         rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1769         rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1770         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1771
1772         return 0;
1773 }
1774
1775 static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
1776 {
1777         struct rt2x00_dev *rt2x00dev = hw->priv;
1778         u64 tsf;
1779         u32 reg;
1780
1781         rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1782         tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1783         rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1784         tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1785
1786         return tsf;
1787 }
1788
1789 static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1790                                    struct ieee80211_tx_control *control)
1791 {
1792         struct rt2x00_dev *rt2x00dev = hw->priv;
1793         struct rt2x00_intf *intf = vif_to_intf(control->vif);
1794         struct queue_entry_priv_pci_tx *priv_tx;
1795         struct skb_frame_desc *skbdesc;
1796         u32 reg;
1797
1798         if (unlikely(!intf->beacon))
1799                 return -ENOBUFS;
1800
1801         priv_tx = intf->beacon->priv_data;
1802
1803         /*
1804          * Fill in skb descriptor
1805          */
1806         skbdesc = get_skb_frame_desc(skb);
1807         memset(skbdesc, 0, sizeof(*skbdesc));
1808         skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
1809         skbdesc->data = skb->data;
1810         skbdesc->data_len = skb->len;
1811         skbdesc->desc = priv_tx->desc;
1812         skbdesc->desc_len = intf->beacon->queue->desc_size;
1813         skbdesc->entry = intf->beacon;
1814
1815         /*
1816          * Disable beaconing while we are reloading the beacon data,
1817          * otherwise we might be sending out invalid data.
1818          */
1819         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1820         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
1821         rt2x00_set_field32(&reg, CSR14_TBCN, 0);
1822         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
1823         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1824
1825         /*
1826          * mac80211 doesn't provide the control->queue variable
1827          * for beacons. Set our own queue identification so
1828          * it can be used during descriptor initialization.
1829          */
1830         control->queue = RT2X00_BCN_QUEUE_BEACON;
1831         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
1832
1833         /*
1834          * Enable beacon generation.
1835          * Write entire beacon with descriptor to register,
1836          * and kick the beacon generator.
1837          */
1838         memcpy(priv_tx->data, skb->data, skb->len);
1839         rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
1840
1841         return 0;
1842 }
1843
1844 static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
1845 {
1846         struct rt2x00_dev *rt2x00dev = hw->priv;
1847         u32 reg;
1848
1849         rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1850         return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1851 }
1852
1853 static const struct ieee80211_ops rt2500pci_mac80211_ops = {
1854         .tx                     = rt2x00mac_tx,
1855         .start                  = rt2x00mac_start,
1856         .stop                   = rt2x00mac_stop,
1857         .add_interface          = rt2x00mac_add_interface,
1858         .remove_interface       = rt2x00mac_remove_interface,
1859         .config                 = rt2x00mac_config,
1860         .config_interface       = rt2x00mac_config_interface,
1861         .configure_filter       = rt2x00mac_configure_filter,
1862         .get_stats              = rt2x00mac_get_stats,
1863         .set_retry_limit        = rt2500pci_set_retry_limit,
1864         .bss_info_changed       = rt2x00mac_bss_info_changed,
1865         .conf_tx                = rt2x00mac_conf_tx,
1866         .get_tx_stats           = rt2x00mac_get_tx_stats,
1867         .get_tsf                = rt2500pci_get_tsf,
1868         .beacon_update          = rt2500pci_beacon_update,
1869         .tx_last_beacon         = rt2500pci_tx_last_beacon,
1870 };
1871
1872 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
1873         .irq_handler            = rt2500pci_interrupt,
1874         .probe_hw               = rt2500pci_probe_hw,
1875         .initialize             = rt2x00pci_initialize,
1876         .uninitialize           = rt2x00pci_uninitialize,
1877         .init_rxentry           = rt2500pci_init_rxentry,
1878         .init_txentry           = rt2500pci_init_txentry,
1879         .set_device_state       = rt2500pci_set_device_state,
1880         .rfkill_poll            = rt2500pci_rfkill_poll,
1881         .link_stats             = rt2500pci_link_stats,
1882         .reset_tuner            = rt2500pci_reset_tuner,
1883         .link_tuner             = rt2500pci_link_tuner,
1884         .led_brightness         = rt2500pci_led_brightness,
1885         .write_tx_desc          = rt2500pci_write_tx_desc,
1886         .write_tx_data          = rt2x00pci_write_tx_data,
1887         .kick_tx_queue          = rt2500pci_kick_tx_queue,
1888         .fill_rxdone            = rt2500pci_fill_rxdone,
1889         .config_filter          = rt2500pci_config_filter,
1890         .config_intf            = rt2500pci_config_intf,
1891         .config_erp             = rt2500pci_config_erp,
1892         .config                 = rt2500pci_config,
1893 };
1894
1895 static const struct data_queue_desc rt2500pci_queue_rx = {
1896         .entry_num              = RX_ENTRIES,
1897         .data_size              = DATA_FRAME_SIZE,
1898         .desc_size              = RXD_DESC_SIZE,
1899         .priv_size              = sizeof(struct queue_entry_priv_pci_rx),
1900 };
1901
1902 static const struct data_queue_desc rt2500pci_queue_tx = {
1903         .entry_num              = TX_ENTRIES,
1904         .data_size              = DATA_FRAME_SIZE,
1905         .desc_size              = TXD_DESC_SIZE,
1906         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1907 };
1908
1909 static const struct data_queue_desc rt2500pci_queue_bcn = {
1910         .entry_num              = BEACON_ENTRIES,
1911         .data_size              = MGMT_FRAME_SIZE,
1912         .desc_size              = TXD_DESC_SIZE,
1913         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1914 };
1915
1916 static const struct data_queue_desc rt2500pci_queue_atim = {
1917         .entry_num              = ATIM_ENTRIES,
1918         .data_size              = DATA_FRAME_SIZE,
1919         .desc_size              = TXD_DESC_SIZE,
1920         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1921 };
1922
1923 static const struct rt2x00_ops rt2500pci_ops = {
1924         .name           = KBUILD_MODNAME,
1925         .max_sta_intf   = 1,
1926         .max_ap_intf    = 1,
1927         .eeprom_size    = EEPROM_SIZE,
1928         .rf_size        = RF_SIZE,
1929         .rx             = &rt2500pci_queue_rx,
1930         .tx             = &rt2500pci_queue_tx,
1931         .bcn            = &rt2500pci_queue_bcn,
1932         .atim           = &rt2500pci_queue_atim,
1933         .lib            = &rt2500pci_rt2x00_ops,
1934         .hw             = &rt2500pci_mac80211_ops,
1935 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1936         .debugfs        = &rt2500pci_rt2x00debug,
1937 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1938 };
1939
1940 /*
1941  * RT2500pci module information.
1942  */
1943 static struct pci_device_id rt2500pci_device_table[] = {
1944         { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
1945         { 0, }
1946 };
1947
1948 MODULE_AUTHOR(DRV_PROJECT);
1949 MODULE_VERSION(DRV_VERSION);
1950 MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
1951 MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
1952 MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
1953 MODULE_LICENSE("GPL");
1954
1955 static struct pci_driver rt2500pci_driver = {
1956         .name           = KBUILD_MODNAME,
1957         .id_table       = rt2500pci_device_table,
1958         .probe          = rt2x00pci_probe,
1959         .remove         = __devexit_p(rt2x00pci_remove),
1960         .suspend        = rt2x00pci_suspend,
1961         .resume         = rt2x00pci_resume,
1962 };
1963
1964 static int __init rt2500pci_init(void)
1965 {
1966         return pci_register_driver(&rt2500pci_driver);
1967 }
1968
1969 static void __exit rt2500pci_exit(void)
1970 {
1971         pci_unregister_driver(&rt2500pci_driver);
1972 }
1973
1974 module_init(rt2500pci_init);
1975 module_exit(rt2500pci_exit);