batman-adv: remove duplicate code from function is_bidirectional_neigh()
[cascardo/linux.git] / drivers / net / wireless / rtlwifi / usb.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2009-2011  Realtek Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  * wlanfae <wlanfae@realtek.com>
23  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
24  * Hsinchu 300, Taiwan.
25  *
26  *****************************************************************************/
27
28 #ifndef __RTL_USB_H__
29 #define __RTL_USB_H__
30
31 #include <linux/usb.h>
32 #include <linux/skbuff.h>
33
34 #define RTL_USB_DEVICE(vend, prod, cfg) \
35         .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
36         .idVendor = (vend), \
37         .idProduct = (prod), \
38         .driver_info = (kernel_ulong_t)&(cfg)
39
40 #define USB_HIGH_SPEED_BULK_SIZE        512
41 #define USB_FULL_SPEED_BULK_SIZE        64
42
43
44 #define RTL_USB_MAX_TXQ_NUM             4               /* max tx queue */
45 #define RTL_USB_MAX_EP_NUM              6               /* max ep number */
46 #define RTL_USB_MAX_TX_URBS_NUM         8
47
48 enum rtl_txq {
49         /* These definitions shall be consistent with value
50          * returned by skb_get_queue_mapping
51          *------------------------------------*/
52         RTL_TXQ_BK,
53         RTL_TXQ_BE,
54         RTL_TXQ_VI,
55         RTL_TXQ_VO,
56         /*------------------------------------*/
57         RTL_TXQ_BCN,
58         RTL_TXQ_MGT,
59         RTL_TXQ_HI,
60
61         /* Must be last */
62         __RTL_TXQ_NUM,
63 };
64
65 struct rtl_ep_map {
66         u32 ep_mapping[__RTL_TXQ_NUM];
67 };
68
69 struct _trx_info {
70         struct rtl_usb *rtlusb;
71         u32 ep_num;
72 };
73
74 static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb,
75                                          struct sk_buff *skb,
76                                          u32 ep_num)
77 {
78         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
79         info->rate_driver_data[0] = rtlusb;
80         info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num;
81 }
82
83
84 /*  Add suspend/resume later */
85 enum rtl_usb_state {
86         USB_STATE_STOP  = 0,
87         USB_STATE_START = 1,
88 };
89
90 #define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state)
91 #define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state)
92 #define SET_USB_STOP(rtlusb_ptr) \
93         do {                                                    \
94                 (rtlusb_ptr)->state = USB_STATE_STOP;           \
95         } while (0)
96
97 #define SET_USB_START(rtlusb_ptr)                               \
98         do { \
99                 (rtlusb_ptr)->state = USB_STATE_START;          \
100         } while (0)
101
102 struct rtl_usb {
103         struct usb_device *udev;
104         struct usb_interface *intf;
105         enum rtl_usb_state state;
106
107         /* Bcn control register setting */
108         u32 reg_bcn_ctrl_val;
109         /* for 88/92cu card disable */
110         u8      disableHWSM;
111         /*QOS & EDCA */
112         enum acm_method acm_method;
113         /* irq  . HIMR,HIMR_EX */
114         u32 irq_mask[2];
115         bool irq_enabled;
116
117         u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index);
118
119         /* Tx */
120         u8 out_ep_nums ;
121         u8 out_queue_sel;
122         struct rtl_ep_map ep_map;
123
124         u32 max_bulk_out_size;
125         u32 tx_submitted_urbs;
126         struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM];
127
128         struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM];
129         struct usb_anchor tx_submitted;
130
131         struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *,
132                                                 struct sk_buff_head *);
133         int (*usb_tx_post_hdl)(struct ieee80211_hw *,
134                                struct urb *, struct sk_buff *);
135         void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *);
136
137         /* Rx */
138         u8 in_ep_nums ;
139         u32 in_ep;              /* Bulk IN endpoint number */
140         u32 rx_max_size;        /* Bulk IN max buffer size */
141         u32 rx_urb_num;         /* How many Bulk INs are submitted to host. */
142         struct usb_anchor       rx_submitted;
143         void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *,
144                                      struct sk_buff_head *);
145         void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *);
146 };
147
148 struct rtl_usb_priv {
149         struct rtl_usb dev;
150         struct rtl_led_ctl ledctl;
151 };
152
153 #define rtl_usbpriv(hw)  (((struct rtl_usb_priv *)(rtl_priv(hw))->priv))
154 #define rtl_usbdev(usbpriv)     (&((usbpriv)->dev))
155
156
157
158 int __devinit rtl_usb_probe(struct usb_interface *intf,
159                             const struct usb_device_id *id);
160 void rtl_usb_disconnect(struct usb_interface *intf);
161 int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
162 int rtl_usb_resume(struct usb_interface *pusb_intf);
163
164 #endif