drivers/phy/phy-tusb1210.c

   1 /**
   2  * tusb1210.c - TUSB1210 USB ULPI PHY driver
   3  *
   4  * Copyright (C) 2015 Intel Corporation
   5  *
   6  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12 #include <linux/module.h>
  13 #include <linux/ulpi/driver.h>
  14 #include <linux/gpio/consumer.h>
  15
  16 #include "ulpi_phy.h"
  17
  18 #define TUSB1210_VENDOR_SPECIFIC2               0x80
  19 #define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT   0
  20 #define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT  4
  21 #define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT      6
  22
  23 struct tusb1210 {
  24         struct ulpi *ulpi;
  25         struct phy *phy;
  26         struct gpio_desc *gpio_reset;
  27         struct gpio_desc *gpio_cs;
  28         u8 vendor_specific2;
  29 };
  30
  31 static int tusb1210_power_on(struct phy *phy)
  32 {
  33         struct tusb1210 *tusb = phy_get_drvdata(phy);
  34
  35         gpiod_set_value_cansleep(tusb->gpio_reset, 1);
  36         gpiod_set_value_cansleep(tusb->gpio_cs, 1);
  37
  38         /* Restore the optional eye diagram optimization value */
  39         if (tusb->vendor_specific2)
  40                 ulpi_write(tusb->ulpi, TUSB1210_VENDOR_SPECIFIC2,
  41                            tusb->vendor_specific2);
  42
  43         return 0;
  44 }
  45
  46 static int tusb1210_power_off(struct phy *phy)
  47 {
  48         struct tusb1210 *tusb = phy_get_drvdata(phy);
  49
  50         gpiod_set_value_cansleep(tusb->gpio_reset, 0);
  51         gpiod_set_value_cansleep(tusb->gpio_cs, 0);
  52
  53         return 0;
  54 }
  55
  56 static const struct phy_ops phy_ops = {
  57         .power_on = tusb1210_power_on,
  58         .power_off = tusb1210_power_off,
  59         .owner = THIS_MODULE,
  60 };
  61
  62 static int tusb1210_probe(struct ulpi *ulpi)
  63 {
  64         struct gpio_desc *gpio;
  65         struct tusb1210 *tusb;
  66         u8 val, reg;
  67         int ret;
  68
  69         tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
  70         if (!tusb)
  71                 return -ENOMEM;
  72
  73         gpio = devm_gpiod_get(&ulpi->dev, "reset");
  74         if (!IS_ERR(gpio)) {
  75                 ret = gpiod_direction_output(gpio, 0);
  76                 if (ret)
  77                         return ret;
  78                 gpiod_set_value_cansleep(gpio, 1);
  79                 tusb->gpio_reset = gpio;
  80         }
  81
  82         gpio = devm_gpiod_get(&ulpi->dev, "cs");
  83         if (!IS_ERR(gpio)) {
  84                 ret = gpiod_direction_output(gpio, 0);
  85                 if (ret)
  86                         return ret;
  87                 gpiod_set_value_cansleep(gpio, 1);
  88                 tusb->gpio_cs = gpio;
  89         }
  90
  91         /*
  92          * VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
  93          * diagram optimization and DP/DM swap.
  94          */
  95
  96         /* High speed output drive strength configuration */
  97         device_property_read_u8(&ulpi->dev, "ihstx", &val);
  98         reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT;
  99
 100         /* High speed output impedance configuration */
 101         device_property_read_u8(&ulpi->dev, "zhsdrv", &val);
 102         reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT;
 103
 104         /* DP/DM swap control */
 105         device_property_read_u8(&ulpi->dev, "datapolarity", &val);
 106         reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT;
 107
 108         if (reg) {
 109                 ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg);
 110                 tusb->vendor_specific2 = reg;
 111         }
 112
 113         tusb->phy = ulpi_phy_create(ulpi, &phy_ops);
 114         if (IS_ERR(tusb->phy))
 115                 return PTR_ERR(tusb->phy);
 116
 117         tusb->ulpi = ulpi;
 118
 119         phy_set_drvdata(tusb->phy, tusb);
 120         ulpi_set_drvdata(ulpi, tusb);
 121         return 0;
 122 }
 123
 124 static void tusb1210_remove(struct ulpi *ulpi)
 125 {
 126         struct tusb1210 *tusb = ulpi_get_drvdata(ulpi);
 127
 128         ulpi_phy_destroy(ulpi, tusb->phy);
 129 }
 130
 131 #define TI_VENDOR_ID 0x0451
 132
 133 static const struct ulpi_device_id tusb1210_ulpi_id[] = {
 134         { TI_VENDOR_ID, 0x1507, },
 135         { },
 136 };
 137 MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id);
 138
 139 static struct ulpi_driver tusb1210_driver = {
 140         .id_table = tusb1210_ulpi_id,
 141         .probe = tusb1210_probe,
 142         .remove = tusb1210_remove,
 143         .driver = {
 144                 .name = "tusb1210",
 145                 .owner = THIS_MODULE,
 146         },
 147 };
 148
 149 module_ulpi_driver(tusb1210_driver);
 150
 151 MODULE_AUTHOR("Intel Corporation");
 152 MODULE_LICENSE("GPL v2");
 153 MODULE_DESCRIPTION("TUSB1210 ULPI PHY driver");