Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
[cascardo/linux.git] / drivers / regulator / Kconfig
1 menuconfig REGULATOR
2         bool "Voltage and Current Regulator Support"
3         help
4           Generic Voltage and Current Regulator support.
5
6           This framework is designed to provide a generic interface to voltage
7           and current regulators within the Linux kernel. It's intended to
8           provide voltage and current control to client or consumer drivers and
9           also provide status information to user space applications through a
10           sysfs interface.
11
12           The intention is to allow systems to dynamically control regulator
13           output in order to save power and prolong battery life. This applies
14           to both voltage regulators (where voltage output is controllable) and
15           current sinks (where current output is controllable).
16
17           This framework safely compiles out if not selected so that client
18           drivers can still be used in systems with no software controllable
19           regulators.
20
21           If unsure, say no.
22
23
24 if REGULATOR
25
26 config REGULATOR_DEBUG
27         bool "Regulator debug support"
28         help
29           Say yes here to enable debugging support.
30
31 config REGULATOR_DUMMY
32         bool "Provide a dummy regulator if regulator lookups fail"
33         help
34           If this option is enabled then when a regulator lookup fails
35           and the board has not specified that it has provided full
36           constraints the regulator core will provide an always
37           enabled dummy regulator, allowing consumer drivers to continue.
38
39           A warning will be generated when this substitution is done.
40
41 config REGULATOR_FIXED_VOLTAGE
42         tristate "Fixed voltage regulator support"
43         help
44           This driver provides support for fixed voltage regulators,
45           useful for systems which use a combination of software
46           managed regulators and simple non-configurable regulators.
47
48 config REGULATOR_VIRTUAL_CONSUMER
49         tristate "Virtual regulator consumer support"
50         help
51           This driver provides a virtual consumer for the voltage and
52           current regulator API which provides sysfs controls for
53           configuring the supplies requested.  This is mainly useful
54           for test purposes.
55
56           If unsure, say no.
57
58 config REGULATOR_USERSPACE_CONSUMER
59         tristate "Userspace regulator consumer support"
60         help
61           There are some classes of devices that are controlled entirely
62           from user space. Userspace consumer driver provides ability to
63           control power supplies for such devices.
64
65           If unsure, say no.
66
67 config REGULATOR_GPIO
68         tristate "GPIO regulator support"
69         depends on GENERIC_GPIO
70         help
71           This driver provides support for regulators that can be
72           controlled via gpios.
73           It is capable of supporting current and voltage regulators
74           and the platform has to provide a mapping of GPIO-states
75           to target volts/amps.
76
77 config REGULATOR_AD5398
78         tristate "Analog Devices AD5398/AD5821 regulators"
79         depends on I2C
80         help
81           This driver supports AD5398 and AD5821 current regulator chips.
82           If building into module, its name is ad5398.ko.
83
84 config REGULATOR_AAT2870
85         tristate "AnalogicTech AAT2870 Regulators"
86         depends on MFD_AAT2870_CORE
87         help
88           If you have a AnalogicTech AAT2870 say Y to enable the
89           regulator driver.
90
91 config REGULATOR_ARIZONA
92         tristate "Wolfson Arizona class devices"
93         depends on MFD_ARIZONA
94         help
95           Support for the regulators found on Wolfson Arizona class
96           devices.
97
98 config REGULATOR_DA903X
99         tristate "Dialog Semiconductor DA9030/DA9034 regulators"
100         depends on PMIC_DA903X
101         help
102           Say y here to support the BUCKs and LDOs regulators found on
103           Dialog Semiconductor DA9030/DA9034 PMIC.
104
105 config REGULATOR_DA9052
106         tristate "Dialog Semiconductor DA9052/DA9053 regulators"
107         depends on PMIC_DA9052
108         help
109           This driver supports the voltage regulators of DA9052-BC and
110           DA9053-AA/Bx PMIC.
111
112 config REGULATOR_DA9055
113         tristate "Dialog Semiconductor DA9055 regulators"
114         depends on MFD_DA9055
115         help
116           Say y here to support the BUCKs and LDOs regulators found on
117           Dialog Semiconductor DA9055 PMIC.
118
119           This driver can also be built as a module. If so, the module
120           will be called da9055-regulator.
121
122 config REGULATOR_FAN53555
123         tristate "Fairchild FAN53555 Regulator"
124         depends on I2C
125         select REGMAP_I2C
126         help
127           This driver supports Fairchild FAN53555 Digitally Programmable
128           TinyBuck Regulator. The FAN53555 is a step-down switching voltage
129           regulator that delivers a digitally programmable output from an
130           input voltage supply of 2.5V to 5.5V. The output voltage is
131           programmed through an I2C interface.
132
133 config REGULATOR_ANATOP
134         tristate "Freescale i.MX on-chip ANATOP LDO regulators"
135         depends on MFD_SYSCON
136         help
137           Say y here to support Freescale i.MX on-chip ANATOP LDOs
138           regulators. It is recommended that this option be
139           enabled on i.MX6 platform.
140
141 config REGULATOR_MC13XXX_CORE
142         tristate
143
144 config REGULATOR_MC13783
145         tristate "Freescale MC13783 regulator driver"
146         depends on MFD_MC13783
147         select REGULATOR_MC13XXX_CORE
148         help
149           Say y here to support the regulators found on the Freescale MC13783
150           PMIC.
151
152 config REGULATOR_MC13892
153         tristate "Freescale MC13892 regulator driver"
154         depends on MFD_MC13XXX
155         select REGULATOR_MC13XXX_CORE
156         help
157           Say y here to support the regulators found on the Freescale MC13892
158           PMIC.
159
160 config REGULATOR_ISL6271A
161         tristate "Intersil ISL6271A Power regulator"
162         depends on I2C
163         help
164           This driver supports ISL6271A voltage regulator chip.
165
166 config REGULATOR_88PM8607
167         bool "Marvell 88PM8607 Power regulators"
168         depends on MFD_88PM860X=y
169         help
170           This driver supports 88PM8607 voltage regulator chips.
171
172 config REGULATOR_MAX1586
173         tristate "Maxim 1586/1587 voltage regulator"
174         depends on I2C
175         help
176           This driver controls a Maxim 1586 or 1587 voltage output
177           regulator via I2C bus. The provided regulator is suitable
178           for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
179
180 config REGULATOR_MAX8649
181         tristate "Maxim 8649 voltage regulator"
182         depends on I2C
183         select REGMAP_I2C
184         help
185           This driver controls a Maxim 8649 voltage output regulator via
186           I2C bus.
187
188 config REGULATOR_MAX8660
189         tristate "Maxim 8660/8661 voltage regulator"
190         depends on I2C
191         help
192           This driver controls a Maxim 8660/8661 voltage output
193           regulator via I2C bus.
194
195 config REGULATOR_MAX8907
196         tristate "Maxim 8907 voltage regulator"
197         depends on MFD_MAX8907
198         help
199           This driver controls a Maxim 8907 voltage output regulator
200           via I2C bus. The provided regulator is suitable for Tegra
201           chip to control Step-Down DC-DC and LDOs.
202
203 config REGULATOR_MAX8925
204         tristate "Maxim MAX8925 Power Management IC"
205         depends on MFD_MAX8925
206         help
207           Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
208
209 config REGULATOR_MAX8952
210         tristate "Maxim MAX8952 Power Management IC"
211         depends on I2C
212         help
213           This driver controls a Maxim 8952 voltage output regulator
214           via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
215           modes ranging from 0.77V to 1.40V by 0.01V steps.
216
217 config REGULATOR_MAX8973
218         tristate "Maxim MAX8973 voltage regulator "
219         depends on I2C
220         select REGMAP_I2C
221         help
222           The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
223           switching regulator delievers up to 9A of output current. Each
224           phase operates at a 2MHz fixed frequency with a 120 deg shift
225           from the adjacent phase, allowing the use of small magnetic component.
226
227 config REGULATOR_MAX8997
228         tristate "Maxim 8997/8966 regulator"
229         depends on MFD_MAX8997
230         help
231           This driver controls a Maxim 8997/8966 regulator
232           via I2C bus. The provided regulator is suitable for S5PC110,
233           S5PV210, and Exynos-4 chips to control VCC_CORE and
234           VCC_USIM voltages.
235
236 config REGULATOR_MAX8998
237         tristate "Maxim 8998 voltage regulator"
238         depends on MFD_MAX8998
239         help
240           This driver controls a Maxim 8998 voltage output regulator
241           via I2C bus. The provided regulator is suitable for S3C6410
242           and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
243
244 config REGULATOR_MAX77686
245         tristate "Maxim 77686 regulator"
246         depends on MFD_MAX77686
247         help
248           This driver controls a Maxim 77686 regulator
249           via I2C bus. The provided regulator is suitable for
250           Exynos-4 chips to control VARM and VINT voltages.
251
252 config REGULATOR_PCAP
253         tristate "Motorola PCAP2 regulator driver"
254         depends on EZX_PCAP
255         help
256          This driver provides support for the voltage regulators of the
257          PCAP2 PMIC.
258
259 config REGULATOR_LP3971
260         tristate "National Semiconductors LP3971 PMIC regulator driver"
261         depends on I2C
262         help
263          Say Y here to support the voltage regulators and convertors
264          on National Semiconductors LP3971 PMIC
265
266 config REGULATOR_LP3972
267         tristate "National Semiconductors LP3972 PMIC regulator driver"
268         depends on I2C
269         help
270          Say Y here to support the voltage regulators and convertors
271          on National Semiconductors LP3972 PMIC
272
273 config REGULATOR_LP872X
274         bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
275         depends on I2C=y
276         select REGMAP_I2C
277         help
278           This driver supports LP8720/LP8725 PMIC
279
280 config REGULATOR_LP8788
281         bool "TI LP8788 Power Regulators"
282         depends on MFD_LP8788
283         help
284           This driver supports LP8788 voltage regulator chip.
285
286 config REGULATOR_PCF50633
287         tristate "NXP PCF50633 regulator driver"
288         depends on MFD_PCF50633
289         help
290          Say Y here to support the voltage regulators and convertors
291          on PCF50633
292
293 config REGULATOR_RC5T583
294         tristate "RICOH RC5T583 Power regulators"
295         depends on MFD_RC5T583
296         help
297           Select this option to enable the power regulator of RICOH
298           PMIC RC5T583.
299           This driver supports the control of different power rails of device
300           through regulator interface. The device supports multiple DCDC/LDO
301           outputs which can be controlled by i2c communication.
302
303 config REGULATOR_S2MPS11
304         tristate "Samsung S2MPS11 voltage regulator"
305         depends on MFD_SEC_CORE
306         help
307          This driver supports a Samsung S2MPS11 voltage output regulator
308          via I2C bus. S2MPS11 is comprised of high efficient Buck converters
309          including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
310
311 config REGULATOR_S5M8767
312         tristate "Samsung S5M8767A voltage regulator"
313         depends on MFD_SEC_CORE
314         help
315          This driver supports a Samsung S5M8767A voltage output regulator
316          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
317          supports DVS mode with 8bits of output voltage control.
318
319 config REGULATOR_AB3100
320         tristate "ST-Ericsson AB3100 Regulator functions"
321         depends on AB3100_CORE
322         default y if AB3100_CORE
323         help
324          These regulators correspond to functionality in the
325          AB3100 analog baseband dealing with power regulators
326          for the system.
327
328 config REGULATOR_AB8500
329         bool "ST-Ericsson AB8500 Power Regulators"
330         depends on AB8500_CORE
331         help
332           This driver supports the regulators found on the ST-Ericsson mixed
333           signal AB8500 PMIC
334
335 config REGULATOR_DBX500_PRCMU
336         bool
337
338 config REGULATOR_DB8500_PRCMU
339         bool "ST-Ericsson DB8500 Voltage Domain Regulators"
340         depends on MFD_DB8500_PRCMU
341         select REGULATOR_DBX500_PRCMU
342         help
343           This driver supports the voltage domain regulators controlled by the
344           DB8500 PRCMU
345
346 config REGULATOR_PALMAS
347         tristate "TI Palmas PMIC Regulators"
348         depends on MFD_PALMAS
349         help
350           If you wish to control the regulators on the Palmas series of
351           chips say Y here. This will enable support for all the software
352           controllable SMPS/LDO regulators.
353
354           The regulators available on Palmas series chips vary depending
355           on the muxing. This is handled automatically in the driver by
356           reading the mux info from OTP.
357
358 config REGULATOR_TPS51632
359         tristate "TI TPS51632 Power Regulator"
360         depends on I2C
361         select REGMAP_I2C
362         help
363           This driver supports TPS51632 voltage regulator chip.
364           The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
365           with Serial VID control and DVFS.
366           The voltage output can be configure through I2C interface or PWM
367           interface.
368
369 config REGULATOR_TPS6105X
370         tristate "TI TPS6105X Power regulators"
371         depends on TPS6105X
372         default y if TPS6105X
373         help
374           This driver supports TPS61050/TPS61052 voltage regulator chips.
375           It is a single boost converter primarily for white LEDs and
376           audio amplifiers.
377
378 config REGULATOR_TPS62360
379         tristate "TI TPS6236x Power Regulator"
380         depends on I2C
381         select REGMAP_I2C
382         help
383           This driver supports TPS6236x voltage regulator chip. This
384           regulator is meant for processor core supply. This chip is
385           high-frequency synchronous step down dc-dc converter optimized
386           for battery-powered portable applications.
387
388 config REGULATOR_TPS65023
389         tristate "TI TPS65023 Power regulators"
390         depends on I2C
391         select REGMAP_I2C
392         help
393           This driver supports TPS65023 voltage regulator chips. TPS65023 provides
394           three step-down converters and two general-purpose LDO voltage regulators.
395           It supports TI's software based Class-2 SmartReflex implementation.
396
397 config REGULATOR_TPS6507X
398         tristate "TI TPS6507X Power regulators"
399         depends on I2C
400         help
401           This driver supports TPS6507X voltage regulator chips. TPS6507X provides
402           three step-down converters and two general-purpose LDO voltage regulators.
403           It supports TI's software based Class-2 SmartReflex implementation.
404
405 config REGULATOR_TPS65090
406         tristate "TI TPS65090 Power regulator"
407         depends on MFD_TPS65090
408         help
409           This driver provides support for the voltage regulators on the
410           TI TPS65090 PMIC.
411
412 config REGULATOR_TPS65217
413         tristate "TI TPS65217 Power regulators"
414         depends on MFD_TPS65217
415         help
416           This driver supports TPS65217 voltage regulator chips. TPS65217
417           provides three step-down converters and four general-purpose LDO
418           voltage regulators. It supports software based voltage control
419           for different voltage domains
420
421 config REGULATOR_TPS6524X
422         tristate "TI TPS6524X Power regulators"
423         depends on SPI
424         help
425           This driver supports TPS6524X voltage regulator chips. TPS6524X
426           provides three step-down converters and two general-purpose LDO
427           voltage regulators.  This device is interfaced using a customized
428           serial interface currently supported on the sequencer serial
429           port controller.
430
431 config REGULATOR_TPS6586X
432         tristate "TI TPS6586X Power regulators"
433         depends on MFD_TPS6586X
434         help
435           This driver supports TPS6586X voltage regulator chips.
436
437 config REGULATOR_TPS65910
438         tristate "TI TPS65910/TPS65911 Power Regulators"
439         depends on MFD_TPS65910
440         help
441           This driver supports TPS65910/TPS65911 voltage regulator chips.
442
443 config REGULATOR_TPS65912
444         tristate "TI TPS65912 Power regulator"
445         depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
446         help
447             This driver supports TPS65912 voltage regulator chip.
448
449 config REGULATOR_TPS80031
450         tristate "TI TPS80031/TPS80032 power regualtor driver"
451         depends on MFD_TPS80031
452         help
453           TPS80031/ TPS80032 Fully Integrated Power Management with Power
454           Path and Battery Charger. It has 5 configurable step-down
455           converters, 11 general purpose LDOs, VBUS generator and digital
456           output to control regulators.
457
458 config REGULATOR_TWL4030
459         bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
460         depends on TWL4030_CORE
461         help
462           This driver supports the voltage regulators provided by
463           this family of companion chips.
464
465 config REGULATOR_VEXPRESS
466         tristate "Versatile Express regulators"
467         depends on VEXPRESS_CONFIG
468         help
469           This driver provides support for voltage regulators available
470           on the ARM Ltd's Versatile Express platform.
471
472 config REGULATOR_WM831X
473         tristate "Wolfson Microelectronics WM831x PMIC regulators"
474         depends on MFD_WM831X
475         help
476           Support the voltage and current regulators of the WM831x series
477           of PMIC devices.
478
479 config REGULATOR_WM8350
480         tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
481         depends on MFD_WM8350
482         help
483           This driver provides support for the voltage and current regulators
484           of the WM8350 AudioPlus PMIC.
485
486 config REGULATOR_WM8400
487         tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
488         depends on MFD_WM8400
489         help
490           This driver provides support for the voltage regulators of the
491           WM8400 AudioPlus PMIC.
492
493 config REGULATOR_WM8994
494         tristate "Wolfson Microelectronics WM8994 CODEC"
495         depends on MFD_WM8994
496         help
497           This driver provides support for the voltage regulators on the
498           WM8994 CODEC.
499
500 config REGULATOR_AS3711
501         tristate "AS3711 PMIC"
502         depends on MFD_AS3711
503         help
504           This driver provides support for the voltage regulators on the
505           AS3711 PMIC
506
507 endif
508