drivers/scsi/isci/request.c

   1 /*
   2  * This file is provided under a dual BSD/GPLv2 license.  When using or
   3  * redistributing this file, you may do so under either license.
   4  *
   5  * GPL LICENSE SUMMARY
   6  *
   7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of version 2 of the GNU General Public License as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called LICENSE.GPL.
  23  *
  24  * BSD LICENSE
  25  *
  26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  27  * All rights reserved.
  28  *
  29  * Redistribution and use in source and binary forms, with or without
  30  * modification, are permitted provided that the following conditions
  31  * are met:
  32  *
  33  *   * Redistributions of source code must retain the above copyright
  34  *     notice, this list of conditions and the following disclaimer.
  35  *   * Redistributions in binary form must reproduce the above copyright
  36  *     notice, this list of conditions and the following disclaimer in
  37  *     the documentation and/or other materials provided with the
  38  *     distribution.
  39  *   * Neither the name of Intel Corporation nor the names of its
  40  *     contributors may be used to endorse or promote products derived
  41  *     from this software without specific prior written permission.
  42  *
  43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  54  */
  55
  56 #include "isci.h"
  57 #include "task.h"
  58 #include "request.h"
  59 #include "sata.h"
  60 #include "scu_completion_codes.h"
  61 #include "scu_event_codes.h"
  62 #include "sas.h"
  63
  64 /**
  65  * This method returns the sgl element pair for the specificed sgl_pair index.
  66  * @sci_req: This parameter specifies the IO request for which to retrieve
  67  *    the Scatter-Gather List element pair.
  68  * @sgl_pair_index: This parameter specifies the index into the SGL element
  69  *    pair to be retrieved.
  70  *
  71  * This method returns a pointer to an struct scu_sgl_element_pair.
  72  */
  73 static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair(
  74         struct scic_sds_request *sci_req,
  75         u32 sgl_pair_index
  76         ) {
  77         struct scu_task_context *task_context;
  78
  79         task_context = (struct scu_task_context *)sci_req->task_context_buffer;
  80
  81         if (sgl_pair_index == 0) {
  82                 return &task_context->sgl_pair_ab;
  83         } else if (sgl_pair_index == 1) {
  84                 return &task_context->sgl_pair_cd;
  85         }
  86
  87         return &sci_req->sg_table[sgl_pair_index - 2];
  88 }
  89
  90 /**
  91  * This function will build the SGL list for an IO request.
  92  * @sci_req: This parameter specifies the IO request for which to build
  93  *    the Scatter-Gather List.
  94  *
  95  */
  96 static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request)
  97 {
  98         struct isci_request *isci_request = sci_req_to_ireq(sds_request);
  99         struct isci_host *isci_host = isci_request->isci_host;
 100         struct sas_task *task = isci_request_access_task(isci_request);
 101         struct scatterlist *sg = NULL;
 102         dma_addr_t dma_addr;
 103         u32 sg_idx = 0;
 104         struct scu_sgl_element_pair *scu_sg   = NULL;
 105         struct scu_sgl_element_pair *prev_sg  = NULL;
 106
 107         if (task->num_scatter > 0) {
 108                 sg = task->scatter;
 109
 110                 while (sg) {
 111                         scu_sg = scic_sds_request_get_sgl_element_pair(
 112                                         sds_request,
 113                                         sg_idx);
 114
 115                         SCU_SGL_COPY(scu_sg->A, sg);
 116
 117                         sg = sg_next(sg);
 118
 119                         if (sg) {
 120                                 SCU_SGL_COPY(scu_sg->B, sg);
 121                                 sg = sg_next(sg);
 122                         } else
 123                                 SCU_SGL_ZERO(scu_sg->B);
 124
 125                         if (prev_sg) {
 126                                 dma_addr =
 127                                         scic_io_request_get_dma_addr(
 128                                                         sds_request,
 129                                                         scu_sg);
 130
 131                                 prev_sg->next_pair_upper =
 132                                         upper_32_bits(dma_addr);
 133                                 prev_sg->next_pair_lower =
 134                                         lower_32_bits(dma_addr);
 135                         }
 136
 137                         prev_sg = scu_sg;
 138                         sg_idx++;
 139                 }
 140         } else {        /* handle when no sg */
 141                 scu_sg = scic_sds_request_get_sgl_element_pair(sds_request,
 142                                                                sg_idx);
 143
 144                 dma_addr = dma_map_single(&isci_host->pdev->dev,
 145                                           task->scatter,
 146                                           task->total_xfer_len,
 147                                           task->data_dir);
 148
 149                 isci_request->zero_scatter_daddr = dma_addr;
 150
 151                 scu_sg->A.length = task->total_xfer_len;
 152                 scu_sg->A.address_upper = upper_32_bits(dma_addr);
 153                 scu_sg->A.address_lower = lower_32_bits(dma_addr);
 154         }
 155
 156         if (scu_sg) {
 157                 scu_sg->next_pair_upper = 0;
 158                 scu_sg->next_pair_lower = 0;
 159         }
 160 }
 161
 162 static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req)
 163 {
 164         struct ssp_cmd_iu *cmd_iu;
 165         struct isci_request *ireq = sci_req_to_ireq(sci_req);
 166         struct sas_task *task = isci_request_access_task(ireq);
 167
 168         cmd_iu = &sci_req->ssp.cmd;
 169
 170         memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8);
 171         cmd_iu->add_cdb_len = 0;
 172         cmd_iu->_r_a = 0;
 173         cmd_iu->_r_b = 0;
 174         cmd_iu->en_fburst = 0; /* unsupported */
 175         cmd_iu->task_prio = task->ssp_task.task_prio;
 176         cmd_iu->task_attr = task->ssp_task.task_attr;
 177         cmd_iu->_r_c = 0;
 178
 179         sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb,
 180                        sizeof(task->ssp_task.cdb) / sizeof(u32));
 181 }
 182
 183 static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req)
 184 {
 185         struct ssp_task_iu *task_iu;
 186         struct isci_request *ireq = sci_req_to_ireq(sci_req);
 187         struct sas_task *task = isci_request_access_task(ireq);
 188         struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq);
 189
 190         task_iu = &sci_req->ssp.tmf;
 191
 192         memset(task_iu, 0, sizeof(struct ssp_task_iu));
 193
 194         memcpy(task_iu->LUN, task->ssp_task.LUN, 8);
 195
 196         task_iu->task_func = isci_tmf->tmf_code;
 197         task_iu->task_tag =
 198                 (ireq->ttype == tmf_task) ?
 199                 isci_tmf->io_tag :
 200                 SCI_CONTROLLER_INVALID_IO_TAG;
 201 }
 202
 203 /**
 204  * This method is will fill in the SCU Task Context for any type of SSP request.
 205  * @sci_req:
 206  * @task_context:
 207  *
 208  */
 209 static void scu_ssp_reqeust_construct_task_context(
 210         struct scic_sds_request *sds_request,
 211         struct scu_task_context *task_context)
 212 {
 213         dma_addr_t dma_addr;
 214         struct scic_sds_remote_device *target_device;
 215         struct scic_sds_port *target_port;
 216
 217         target_device = scic_sds_request_get_device(sds_request);
 218         target_port = scic_sds_request_get_port(sds_request);
 219
 220         /* Fill in the TC with the its required data */
 221         task_context->abort = 0;
 222         task_context->priority = 0;
 223         task_context->initiator_request = 1;
 224         task_context->connection_rate = target_device->connection_rate;
 225         task_context->protocol_engine_index =
 226                 scic_sds_controller_get_protocol_engine_group(controller);
 227         task_context->logical_port_index =
 228                 scic_sds_port_get_index(target_port);
 229         task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
 230         task_context->valid = SCU_TASK_CONTEXT_VALID;
 231         task_context->context_type = SCU_TASK_CONTEXT_TYPE;
 232
 233         task_context->remote_node_index =
 234                 scic_sds_remote_device_get_index(sds_request->target_device);
 235         task_context->command_code = 0;
 236
 237         task_context->link_layer_control = 0;
 238         task_context->do_not_dma_ssp_good_response = 1;
 239         task_context->strict_ordering = 0;
 240         task_context->control_frame = 0;
 241         task_context->timeout_enable = 0;
 242         task_context->block_guard_enable = 0;
 243
 244         task_context->address_modifier = 0;
 245
 246         /* task_context->type.ssp.tag = sci_req->io_tag; */
 247         task_context->task_phase = 0x01;
 248
 249         if (sds_request->was_tag_assigned_by_user) {
 250                 /*
 251                  * Build the task context now since we have already read
 252                  * the data
 253                  */
 254                 sds_request->post_context =
 255                         (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
 256                          (scic_sds_controller_get_protocol_engine_group(
 257                                                         controller) <<
 258                           SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
 259                          (scic_sds_port_get_index(target_port) <<
 260                           SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
 261                          scic_sds_io_tag_get_index(sds_request->io_tag));
 262         } else {
 263                 /*
 264                  * Build the task context now since we have already read
 265                  * the data
 266                  *
 267                  * I/O tag index is not assigned because we have to wait
 268                  * until we get a TCi
 269                  */
 270                 sds_request->post_context =
 271                         (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
 272                          (scic_sds_controller_get_protocol_engine_group(
 273                                                         owning_controller) <<
 274                           SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
 275                          (scic_sds_port_get_index(target_port) <<
 276                           SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
 277         }
 278
 279         /*
 280          * Copy the physical address for the command buffer to the
 281          * SCU Task Context
 282          */
 283         dma_addr = scic_io_request_get_dma_addr(sds_request,
 284                                                 &sds_request->ssp.cmd);
 285
 286         task_context->command_iu_upper = upper_32_bits(dma_addr);
 287         task_context->command_iu_lower = lower_32_bits(dma_addr);
 288
 289         /*
 290          * Copy the physical address for the response buffer to the
 291          * SCU Task Context
 292          */
 293         dma_addr = scic_io_request_get_dma_addr(sds_request,
 294                                                 &sds_request->ssp.rsp);
 295
 296         task_context->response_iu_upper = upper_32_bits(dma_addr);
 297         task_context->response_iu_lower = lower_32_bits(dma_addr);
 298 }
 299
 300 /**
 301  * This method is will fill in the SCU Task Context for a SSP IO request.
 302  * @sci_req:
 303  *
 304  */
 305 static void scu_ssp_io_request_construct_task_context(
 306         struct scic_sds_request *sci_req,
 307         enum dma_data_direction dir,
 308         u32 len)
 309 {
 310         struct scu_task_context *task_context;
 311
 312         task_context = scic_sds_request_get_task_context(sci_req);
 313
 314         scu_ssp_reqeust_construct_task_context(sci_req, task_context);
 315
 316         task_context->ssp_command_iu_length =
 317                 sizeof(struct ssp_cmd_iu) / sizeof(u32);
 318         task_context->type.ssp.frame_type = SSP_COMMAND;
 319
 320         switch (dir) {
 321         case DMA_FROM_DEVICE:
 322         case DMA_NONE:
 323         default:
 324                 task_context->task_type = SCU_TASK_TYPE_IOREAD;
 325                 break;
 326         case DMA_TO_DEVICE:
 327                 task_context->task_type = SCU_TASK_TYPE_IOWRITE;
 328                 break;
 329         }
 330
 331         task_context->transfer_length_bytes = len;
 332
 333         if (task_context->transfer_length_bytes > 0)
 334                 scic_sds_request_build_sgl(sci_req);
 335 }
 336
 337 /**
 338  * This method will fill in the SCU Task Context for a SSP Task request.  The
 339  *    following important settings are utilized: -# priority ==
 340  *    SCU_TASK_PRIORITY_HIGH.  This ensures that the task request is issued
 341  *    ahead of other task destined for the same Remote Node. -# task_type ==
 342  *    SCU_TASK_TYPE_IOREAD.  This simply indicates that a normal request type
 343  *    (i.e. non-raw frame) is being utilized to perform task management. -#
 344  *    control_frame == 1.  This ensures that the proper endianess is set so
 345  *    that the bytes are transmitted in the right order for a task frame.
 346  * @sci_req: This parameter specifies the task request object being
 347  *    constructed.
 348  *
 349  */
 350 static void scu_ssp_task_request_construct_task_context(
 351         struct scic_sds_request *sci_req)
 352 {
 353         struct scu_task_context *task_context;
 354
 355         task_context = scic_sds_request_get_task_context(sci_req);
 356
 357         scu_ssp_reqeust_construct_task_context(sci_req, task_context);
 358
 359         task_context->control_frame                = 1;
 360         task_context->priority                     = SCU_TASK_PRIORITY_HIGH;
 361         task_context->task_type                    = SCU_TASK_TYPE_RAW_FRAME;
 362         task_context->transfer_length_bytes        = 0;
 363         task_context->type.ssp.frame_type          = SSP_TASK;
 364         task_context->ssp_command_iu_length =
 365                 sizeof(struct ssp_task_iu) / sizeof(u32);
 366 }
 367
 368 /**
 369  * This method is will fill in the SCU Task Context for any type of SATA
 370  *    request.  This is called from the various SATA constructors.
 371  * @sci_req: The general IO request object which is to be used in
 372  *    constructing the SCU task context.
 373  * @task_context: The buffer pointer for the SCU task context which is being
 374  *    constructed.
 375  *
 376  * The general io request construction is complete. The buffer assignment for
 377  * the command buffer is complete. none Revisit task context construction to
 378  * determine what is common for SSP/SMP/STP task context structures.
 379  */
 380 static void scu_sata_reqeust_construct_task_context(
 381         struct scic_sds_request *sci_req,
 382         struct scu_task_context *task_context)
 383 {
 384         dma_addr_t dma_addr;
 385         struct scic_sds_remote_device *target_device;
 386         struct scic_sds_port *target_port;
 387
 388         target_device = scic_sds_request_get_device(sci_req);
 389         target_port = scic_sds_request_get_port(sci_req);
 390
 391         /* Fill in the TC with the its required data */
 392         task_context->abort = 0;
 393         task_context->priority = SCU_TASK_PRIORITY_NORMAL;
 394         task_context->initiator_request = 1;
 395         task_context->connection_rate = target_device->connection_rate;
 396         task_context->protocol_engine_index =
 397                 scic_sds_controller_get_protocol_engine_group(controller);
 398         task_context->logical_port_index =
 399                 scic_sds_port_get_index(target_port);
 400         task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP;
 401         task_context->valid = SCU_TASK_CONTEXT_VALID;
 402         task_context->context_type = SCU_TASK_CONTEXT_TYPE;
 403
 404         task_context->remote_node_index =
 405                 scic_sds_remote_device_get_index(sci_req->target_device);
 406         task_context->command_code = 0;
 407
 408         task_context->link_layer_control = 0;
 409         task_context->do_not_dma_ssp_good_response = 1;
 410         task_context->strict_ordering = 0;
 411         task_context->control_frame = 0;
 412         task_context->timeout_enable = 0;
 413         task_context->block_guard_enable = 0;
 414
 415         task_context->address_modifier = 0;
 416         task_context->task_phase = 0x01;
 417
 418         task_context->ssp_command_iu_length =
 419                 (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32);
 420
 421         /* Set the first word of the H2D REG FIS */
 422         task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd;
 423
 424         if (sci_req->was_tag_assigned_by_user) {
 425                 /*
 426                  * Build the task context now since we have already read
 427                  * the data
 428                  */
 429                 sci_req->post_context =
 430                         (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
 431                          (scic_sds_controller_get_protocol_engine_group(
 432                                                         controller) <<
 433                           SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
 434                          (scic_sds_port_get_index(target_port) <<
 435                           SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
 436                          scic_sds_io_tag_get_index(sci_req->io_tag));
 437         } else {
 438                 /*
 439                  * Build the task context now since we have already read
 440                  * the data.
 441                  * I/O tag index is not assigned because we have to wait
 442                  * until we get a TCi.
 443                  */
 444                 sci_req->post_context =
 445                         (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
 446                          (scic_sds_controller_get_protocol_engine_group(
 447                                                         controller) <<
 448                           SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
 449                          (scic_sds_port_get_index(target_port) <<
 450                           SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
 451         }
 452
 453         /*
 454          * Copy the physical address for the command buffer to the SCU Task
 455          * Context. We must offset the command buffer by 4 bytes because the
 456          * first 4 bytes are transfered in the body of the TC.
 457          */
 458         dma_addr = scic_io_request_get_dma_addr(sci_req,
 459                                                 ((char *) &sci_req->stp.cmd) +
 460                                                 sizeof(u32));
 461
 462         task_context->command_iu_upper = upper_32_bits(dma_addr);
 463         task_context->command_iu_lower = lower_32_bits(dma_addr);
 464
 465         /* SATA Requests do not have a response buffer */
 466         task_context->response_iu_upper = 0;
 467         task_context->response_iu_lower = 0;
 468 }
 469
 470
 471
 472 /**
 473  * scu_stp_raw_request_construct_task_context -
 474  * @sci_req: This parameter specifies the STP request object for which to
 475  *    construct a RAW command frame task context.
 476  * @task_context: This parameter specifies the SCU specific task context buffer
 477  *    to construct.
 478  *
 479  * This method performs the operations common to all SATA/STP requests
 480  * utilizing the raw frame method. none
 481  */
 482 static void scu_stp_raw_request_construct_task_context(struct scic_sds_stp_request *stp_req,
 483                                                        struct scu_task_context *task_context)
 484 {
 485         struct scic_sds_request *sci_req = to_sci_req(stp_req);
 486
 487         scu_sata_reqeust_construct_task_context(sci_req, task_context);
 488
 489         task_context->control_frame         = 0;
 490         task_context->priority              = SCU_TASK_PRIORITY_NORMAL;
 491         task_context->task_type             = SCU_TASK_TYPE_SATA_RAW_FRAME;
 492         task_context->type.stp.fis_type     = FIS_REGH2D;
 493         task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32);
 494 }
 495
 496 static enum sci_status
 497 scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req,
 498                                    bool copy_rx_frame)
 499 {
 500         struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
 501         struct scic_sds_stp_pio_request *pio = &stp_req->type.pio;
 502
 503         scu_stp_raw_request_construct_task_context(stp_req,
 504                                                    sci_req->task_context_buffer);
 505
 506         pio->current_transfer_bytes = 0;
 507         pio->ending_error = 0;
 508         pio->ending_status = 0;
 509
 510         pio->request_current.sgl_offset = 0;
 511         pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A;
 512
 513         if (copy_rx_frame) {
 514                 scic_sds_request_build_sgl(sci_req);
 515                 /* Since the IO request copy of the TC contains the same data as
 516                  * the actual TC this pointer is vaild for either.
 517                  */
 518                 pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab;
 519         } else {
 520                 /* The user does not want the data copied to the SGL buffer location */
 521                 pio->request_current.sgl_pair = NULL;
 522         }
 523
 524         return SCI_SUCCESS;
 525 }
 526
 527 /**
 528  *
 529  * @sci_req: This parameter specifies the request to be constructed as an
 530  *    optimized request.
 531  * @optimized_task_type: This parameter specifies whether the request is to be
 532  *    an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A
 533  *    value of 1 indicates NCQ.
 534  *
 535  * This method will perform request construction common to all types of STP
 536  * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method
 537  * returns an indication as to whether the construction was successful.
 538  */
 539 static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req,
 540                                                      u8 optimized_task_type,
 541                                                      u32 len,
 542                                                      enum dma_data_direction dir)
 543 {
 544         struct scu_task_context *task_context = sci_req->task_context_buffer;
 545
 546         /* Build the STP task context structure */
 547         scu_sata_reqeust_construct_task_context(sci_req, task_context);
 548
 549         /* Copy over the SGL elements */
 550         scic_sds_request_build_sgl(sci_req);
 551
 552         /* Copy over the number of bytes to be transfered */
 553         task_context->transfer_length_bytes = len;
 554
 555         if (dir == DMA_TO_DEVICE) {
 556                 /*
 557                  * The difference between the DMA IN and DMA OUT request task type
 558                  * values are consistent with the difference between FPDMA READ
 559                  * and FPDMA WRITE values.  Add the supplied task type parameter
 560                  * to this difference to set the task type properly for this
 561                  * DATA OUT (WRITE) case. */
 562                 task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT
 563                                                                  - SCU_TASK_TYPE_DMA_IN);
 564         } else {
 565                 /*
 566                  * For the DATA IN (READ) case, simply save the supplied
 567                  * optimized task type. */
 568                 task_context->task_type = optimized_task_type;
 569         }
 570 }
 571
 572
 573
 574 static enum sci_status
 575 scic_io_request_construct_sata(struct scic_sds_request *sci_req,
 576                                u32 len,
 577                                enum dma_data_direction dir,
 578                                bool copy)
 579 {
 580         enum sci_status status = SCI_SUCCESS;
 581         struct isci_request *ireq = sci_req_to_ireq(sci_req);
 582         struct sas_task *task = isci_request_access_task(ireq);
 583
 584         /* check for management protocols */
 585         if (ireq->ttype == tmf_task) {
 586                 struct isci_tmf *tmf = isci_request_access_tmf(ireq);
 587
 588                 if (tmf->tmf_code == isci_tmf_sata_srst_high ||
 589                     tmf->tmf_code == isci_tmf_sata_srst_low) {
 590                         scu_stp_raw_request_construct_task_context(&sci_req->stp.req,
 591                                                                    sci_req->task_context_buffer);
 592                         return SCI_SUCCESS;
 593                 } else {
 594                         dev_err(scic_to_dev(sci_req->owning_controller),
 595                                 "%s: Request 0x%p received un-handled SAT "
 596                                 "management protocol 0x%x.\n",
 597                                 __func__, sci_req, tmf->tmf_code);
 598
 599                         return SCI_FAILURE;
 600                 }
 601         }
 602
 603         if (!sas_protocol_ata(task->task_proto)) {
 604                 dev_err(scic_to_dev(sci_req->owning_controller),
 605                         "%s: Non-ATA protocol in SATA path: 0x%x\n",
 606                         __func__,
 607                         task->task_proto);
 608                 return SCI_FAILURE;
 609
 610         }
 611
 612         /* non data */
 613         if (task->data_dir == DMA_NONE) {
 614                 scu_stp_raw_request_construct_task_context(&sci_req->stp.req,
 615                                                            sci_req->task_context_buffer);
 616                 return SCI_SUCCESS;
 617         }
 618
 619         /* NCQ */
 620         if (task->ata_task.use_ncq) {
 621                 scic_sds_stp_optimized_request_construct(sci_req,
 622                                                          SCU_TASK_TYPE_FPDMAQ_READ,
 623                                                          len, dir);
 624                 return SCI_SUCCESS;
 625         }
 626
 627         /* DMA */
 628         if (task->ata_task.dma_xfer) {
 629                 scic_sds_stp_optimized_request_construct(sci_req,
 630                                                          SCU_TASK_TYPE_DMA_IN,
 631                                                          len, dir);
 632                 return SCI_SUCCESS;
 633         } else /* PIO */
 634                 return scic_sds_stp_pio_request_construct(sci_req, copy);
 635
 636         return status;
 637 }
 638
 639 static enum sci_status scic_io_request_construct_basic_ssp(struct scic_sds_request *sci_req)
 640 {
 641         struct isci_request *ireq = sci_req_to_ireq(sci_req);
 642         struct sas_task *task = isci_request_access_task(ireq);
 643
 644         sci_req->protocol = SCIC_SSP_PROTOCOL;
 645
 646         scu_ssp_io_request_construct_task_context(sci_req,
 647                                                   task->data_dir,
 648                                                   task->total_xfer_len);
 649
 650         scic_sds_io_request_build_ssp_command_iu(sci_req);
 651
 652         sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);
 653
 654         return SCI_SUCCESS;
 655 }
 656
 657 enum sci_status scic_task_request_construct_ssp(
 658         struct scic_sds_request *sci_req)
 659 {
 660         /* Construct the SSP Task SCU Task Context */
 661         scu_ssp_task_request_construct_task_context(sci_req);
 662
 663         /* Fill in the SSP Task IU */
 664         scic_sds_task_request_build_ssp_task_iu(sci_req);
 665
 666         sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);
 667
 668         return SCI_SUCCESS;
 669 }
 670
 671 static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req)
 672 {
 673         enum sci_status status;
 674         bool copy = false;
 675         struct isci_request *isci_request = sci_req_to_ireq(sci_req);
 676         struct sas_task *task = isci_request_access_task(isci_request);
 677
 678         sci_req->protocol = SCIC_STP_PROTOCOL;
 679
 680         copy = (task->data_dir == DMA_NONE) ? false : true;
 681
 682         status = scic_io_request_construct_sata(sci_req,
 683                                                 task->total_xfer_len,
 684                                                 task->data_dir,
 685                                                 copy);
 686
 687         if (status == SCI_SUCCESS)
 688                 sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);
 689
 690         return status;
 691 }
 692
 693 enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req)
 694 {
 695         enum sci_status status = SCI_SUCCESS;
 696         struct isci_request *ireq = sci_req_to_ireq(sci_req);
 697
 698         /* check for management protocols */
 699         if (ireq->ttype == tmf_task) {
 700                 struct isci_tmf *tmf = isci_request_access_tmf(ireq);
 701
 702                 if (tmf->tmf_code == isci_tmf_sata_srst_high ||
 703                     tmf->tmf_code == isci_tmf_sata_srst_low) {
 704                         scu_stp_raw_request_construct_task_context(&sci_req->stp.req,
 705                                                                    sci_req->task_context_buffer);
 706                 } else {
 707                         dev_err(scic_to_dev(sci_req->owning_controller),
 708                                 "%s: Request 0x%p received un-handled SAT "
 709                                 "Protocol 0x%x.\n",
 710                                 __func__, sci_req, tmf->tmf_code);
 711
 712                         return SCI_FAILURE;
 713                 }
 714         }
 715
 716         if (status != SCI_SUCCESS)
 717                 return status;
 718         sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);
 719
 720         return status;
 721 }
 722
 723 /**
 724  * sci_req_tx_bytes - bytes transferred when reply underruns request
 725  * @sci_req: request that was terminated early
 726  */
 727 #define SCU_TASK_CONTEXT_SRAM 0x200000
 728 static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req)
 729 {
 730         struct scic_sds_controller *scic = sci_req->owning_controller;
 731         u32 ret_val = 0;
 732
 733         if (readl(&scic->smu_registers->address_modifier) == 0) {
 734                 void __iomem *scu_reg_base = scic->scu_registers;
 735
 736                 /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where
 737                  *   BAR1 is the scu_registers
 738                  *   0x20002C = 0x200000 + 0x2c
 739                  *            = start of task context SRAM + offset of (type.ssp.data_offset)
 740                  *   TCi is the io_tag of struct scic_sds_request
 741                  */
 742                 ret_val = readl(scu_reg_base +
 743                                 (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) +
 744                                 ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(sci_req->io_tag)));
 745         }
 746
 747         return ret_val;
 748 }
 749
 750 enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req)
 751 {
 752         struct scic_sds_controller *scic = sci_req->owning_controller;
 753         struct scu_task_context *task_context;
 754         enum sci_base_request_states state;
 755
 756         if (sci_req->device_sequence !=
 757             scic_sds_remote_device_get_sequence(sci_req->target_device))
 758                 return SCI_FAILURE;
 759
 760         state = sci_req->sm.current_state_id;
 761         if (state != SCI_REQ_CONSTRUCTED) {
 762                 dev_warn(scic_to_dev(scic),
 763                         "%s: SCIC IO Request requested to start while in wrong "
 764                          "state %d\n", __func__, state);
 765                 return SCI_FAILURE_INVALID_STATE;
 766         }
 767
 768         /* if necessary, allocate a TCi for the io request object and then will,
 769          * if necessary, copy the constructed TC data into the actual TC buffer.
 770          * If everything is successful the post context field is updated with
 771          * the TCi so the controller can post the request to the hardware.
 772          */
 773         if (sci_req->io_tag == SCI_CONTROLLER_INVALID_IO_TAG)
 774                 sci_req->io_tag = scic_controller_allocate_io_tag(scic);
 775
 776         /* Record the IO Tag in the request */
 777         if (sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) {
 778                 task_context = sci_req->task_context_buffer;
 779
 780                 task_context->task_index = scic_sds_io_tag_get_index(sci_req->io_tag);
 781
 782                 switch (task_context->protocol_type) {
 783                 case SCU_TASK_CONTEXT_PROTOCOL_SMP:
 784                 case SCU_TASK_CONTEXT_PROTOCOL_SSP:
 785                         /* SSP/SMP Frame */
 786                         task_context->type.ssp.tag = sci_req->io_tag;
 787                         task_context->type.ssp.target_port_transfer_tag =
 788                                 0xFFFF;
 789                         break;
 790
 791                 case SCU_TASK_CONTEXT_PROTOCOL_STP:
 792                         /* STP/SATA Frame
 793                          * task_context->type.stp.ncq_tag = sci_req->ncq_tag;
 794                          */
 795                         break;
 796
 797                 case SCU_TASK_CONTEXT_PROTOCOL_NONE:
 798                         /* / @todo When do we set no protocol type? */
 799                         break;
 800
 801                 default:
 802                         /* This should never happen since we build the IO
 803                          * requests */
 804                         break;
 805                 }
 806
 807                 /*
 808                  * Check to see if we need to copy the task context buffer
 809                  * or have been building into the task context buffer */
 810                 if (sci_req->was_tag_assigned_by_user == false)
 811                         scic_sds_controller_copy_task_context(scic, sci_req);
 812
 813                 /* Add to the post_context the io tag value */
 814                 sci_req->post_context |= scic_sds_io_tag_get_index(sci_req->io_tag);
 815
 816                 /* Everything is good go ahead and change state */
 817                 sci_change_state(&sci_req->sm, SCI_REQ_STARTED);
 818
 819                 return SCI_SUCCESS;
 820         }
 821
 822         return SCI_FAILURE_INSUFFICIENT_RESOURCES;
 823 }
 824
 825 enum sci_status
 826 scic_sds_io_request_terminate(struct scic_sds_request *sci_req)
 827 {
 828         enum sci_base_request_states state;
 829
 830         state = sci_req->sm.current_state_id;
 831
 832         switch (state) {
 833         case SCI_REQ_CONSTRUCTED:
 834                 scic_sds_request_set_status(sci_req,
 835                         SCU_TASK_DONE_TASK_ABORT,
 836                         SCI_FAILURE_IO_TERMINATED);
 837
 838                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
 839                 return SCI_SUCCESS;
 840         case SCI_REQ_STARTED:
 841         case SCI_REQ_TASK_WAIT_TC_COMP:
 842         case SCI_REQ_SMP_WAIT_RESP:
 843         case SCI_REQ_SMP_WAIT_TC_COMP:
 844         case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
 845         case SCI_REQ_STP_UDMA_WAIT_D2H:
 846         case SCI_REQ_STP_NON_DATA_WAIT_H2D:
 847         case SCI_REQ_STP_NON_DATA_WAIT_D2H:
 848         case SCI_REQ_STP_PIO_WAIT_H2D:
 849         case SCI_REQ_STP_PIO_WAIT_FRAME:
 850         case SCI_REQ_STP_PIO_DATA_IN:
 851         case SCI_REQ_STP_PIO_DATA_OUT:
 852         case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
 853         case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
 854         case SCI_REQ_STP_SOFT_RESET_WAIT_D2H:
 855                 sci_change_state(&sci_req->sm, SCI_REQ_ABORTING);
 856                 return SCI_SUCCESS;
 857         case SCI_REQ_TASK_WAIT_TC_RESP:
 858                 sci_change_state(&sci_req->sm, SCI_REQ_ABORTING);
 859                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
 860                 return SCI_SUCCESS;
 861         case SCI_REQ_ABORTING:
 862                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
 863                 return SCI_SUCCESS;
 864         case SCI_REQ_COMPLETED:
 865         default:
 866                 dev_warn(scic_to_dev(sci_req->owning_controller),
 867                          "%s: SCIC IO Request requested to abort while in wrong "
 868                          "state %d\n",
 869                          __func__,
 870                          sci_req->sm.current_state_id);
 871                 break;
 872         }
 873
 874         return SCI_FAILURE_INVALID_STATE;
 875 }
 876
 877 enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req)
 878 {
 879         enum sci_base_request_states state;
 880         struct scic_sds_controller *scic = sci_req->owning_controller;
 881
 882         state = sci_req->sm.current_state_id;
 883         if (WARN_ONCE(state != SCI_REQ_COMPLETED,
 884                       "isci: request completion from wrong state (%d)\n", state))
 885                 return SCI_FAILURE_INVALID_STATE;
 886
 887         if (!sci_req->was_tag_assigned_by_user)
 888                 scic_controller_free_io_tag(scic, sci_req->io_tag);
 889
 890         if (sci_req->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX)
 891                 scic_sds_controller_release_frame(scic,
 892                                                   sci_req->saved_rx_frame_index);
 893
 894         /* XXX can we just stop the machine and remove the 'final' state? */
 895         sci_change_state(&sci_req->sm, SCI_REQ_FINAL);
 896         return SCI_SUCCESS;
 897 }
 898
 899 enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req,
 900                                                   u32 event_code)
 901 {
 902         enum sci_base_request_states state;
 903         struct scic_sds_controller *scic = sci_req->owning_controller;
 904
 905         state = sci_req->sm.current_state_id;
 906
 907         if (state != SCI_REQ_STP_PIO_DATA_IN) {
 908                 dev_warn(scic_to_dev(scic), "%s: (%x) in wrong state %d\n",
 909                          __func__, event_code, state);
 910
 911                 return SCI_FAILURE_INVALID_STATE;
 912         }
 913
 914         switch (scu_get_event_specifier(event_code)) {
 915         case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT:
 916                 /* We are waiting for data and the SCU has R_ERR the data frame.
 917                  * Go back to waiting for the D2H Register FIS
 918                  */
 919                 sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
 920                 return SCI_SUCCESS;
 921         default:
 922                 dev_err(scic_to_dev(scic),
 923                         "%s: pio request unexpected event %#x\n",
 924                         __func__, event_code);
 925
 926                 /* TODO Should we fail the PIO request when we get an
 927                  * unexpected event?
 928                  */
 929                 return SCI_FAILURE;
 930         }
 931 }
 932
 933 /*
 934  * This function copies response data for requests returning response data
 935  *    instead of sense data.
 936  * @sci_req: This parameter specifies the request object for which to copy
 937  *    the response data.
 938  */
 939 static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req)
 940 {
 941         void *resp_buf;
 942         u32 len;
 943         struct ssp_response_iu *ssp_response;
 944         struct isci_request *ireq = sci_req_to_ireq(sci_req);
 945         struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq);
 946
 947         ssp_response = &sci_req->ssp.rsp;
 948
 949         resp_buf = &isci_tmf->resp.resp_iu;
 950
 951         len = min_t(u32,
 952                     SSP_RESP_IU_MAX_SIZE,
 953                     be32_to_cpu(ssp_response->response_data_len));
 954
 955         memcpy(resp_buf, ssp_response->resp_data, len);
 956 }
 957
 958 static enum sci_status
 959 request_started_state_tc_event(struct scic_sds_request *sci_req,
 960                                u32 completion_code)
 961 {
 962         struct ssp_response_iu *resp_iu;
 963         u8 datapres;
 964
 965         /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000
 966          * to determine SDMA status
 967          */
 968         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
 969         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
 970                 scic_sds_request_set_status(sci_req,
 971                                             SCU_TASK_DONE_GOOD,
 972                                             SCI_SUCCESS);
 973                 break;
 974         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): {
 975                 /* There are times when the SCU hardware will return an early
 976                  * response because the io request specified more data than is
 977                  * returned by the target device (mode pages, inquiry data,
 978                  * etc.).  We must check the response stats to see if this is
 979                  * truly a failed request or a good request that just got
 980                  * completed early.
 981                  */
 982                 struct ssp_response_iu *resp = &sci_req->ssp.rsp;
 983                 ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);
 984
 985                 sci_swab32_cpy(&sci_req->ssp.rsp,
 986                                &sci_req->ssp.rsp,
 987                                word_cnt);
 988
 989                 if (resp->status == 0) {
 990                         scic_sds_request_set_status(sci_req,
 991                                                     SCU_TASK_DONE_GOOD,
 992                                                     SCI_SUCCESS_IO_DONE_EARLY);
 993                 } else {
 994                         scic_sds_request_set_status(sci_req,
 995                                                     SCU_TASK_DONE_CHECK_RESPONSE,
 996                                                     SCI_FAILURE_IO_RESPONSE_VALID);
 997                 }
 998                 break;
 999         }
1000         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): {
1001                 ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);
1002
1003                 sci_swab32_cpy(&sci_req->ssp.rsp,
1004                                &sci_req->ssp.rsp,
1005                                word_cnt);
1006
1007                 scic_sds_request_set_status(sci_req,
1008                                             SCU_TASK_DONE_CHECK_RESPONSE,
1009                                             SCI_FAILURE_IO_RESPONSE_VALID);
1010                 break;
1011         }
1012
1013         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR):
1014                 /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame
1015                  * guaranteed to be received before this completion status is
1016                  * posted?
1017                  */
1018                 resp_iu = &sci_req->ssp.rsp;
1019                 datapres = resp_iu->datapres;
1020
1021                 if (datapres == 1 || datapres == 2) {
1022                         scic_sds_request_set_status(sci_req,
1023                                                     SCU_TASK_DONE_CHECK_RESPONSE,
1024                                                     SCI_FAILURE_IO_RESPONSE_VALID);
1025                 } else
1026                         scic_sds_request_set_status(sci_req,
1027                                                     SCU_TASK_DONE_GOOD,
1028                                                     SCI_SUCCESS);
1029                 break;
1030         /* only stp device gets suspended. */
1031         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
1032         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR):
1033         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR):
1034         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR):
1035         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR):
1036         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN):
1037         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
1038         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP):
1039         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS):
1040         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
1041         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR):
1042                 if (sci_req->protocol == SCIC_STP_PROTOCOL) {
1043                         scic_sds_request_set_status(sci_req,
1044                                 SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
1045                                 SCU_COMPLETION_TL_STATUS_SHIFT,
1046                                 SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED);
1047                 } else {
1048                         scic_sds_request_set_status(sci_req,
1049                                 SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
1050                                 SCU_COMPLETION_TL_STATUS_SHIFT,
1051                                 SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1052                 }
1053                 break;
1054
1055         /* both stp/ssp device gets suspended */
1056         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR):
1057         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION):
1058         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1):
1059         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2):
1060         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3):
1061         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION):
1062         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION):
1063         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY):
1064         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED):
1065         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED):
1066                 scic_sds_request_set_status(sci_req,
1067                                             SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
1068                                             SCU_COMPLETION_TL_STATUS_SHIFT,
1069                                             SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED);
1070                 break;
1071
1072         /* neither ssp nor stp gets suspended. */
1073         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR):
1074         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR):
1075         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR):
1076         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR):
1077         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR):
1078         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA):
1079         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
1080         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
1081         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
1082         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
1083         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA):
1084         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL):
1085         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV):
1086         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV):
1087         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND):
1088         default:
1089                 scic_sds_request_set_status(
1090                         sci_req,
1091                         SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
1092                         SCU_COMPLETION_TL_STATUS_SHIFT,
1093                         SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1094                 break;
1095         }
1096
1097         /*
1098          * TODO: This is probably wrong for ACK/NAK timeout conditions
1099          */
1100
1101         /* In all cases we will treat this as the completion of the IO req. */
1102         sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1103         return SCI_SUCCESS;
1104 }
1105
1106 static enum sci_status
1107 request_aborting_state_tc_event(struct scic_sds_request *sci_req,
1108                                 u32 completion_code)
1109 {
1110         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1111         case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
1112         case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT):
1113                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_TASK_ABORT,
1114                                             SCI_FAILURE_IO_TERMINATED);
1115
1116                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1117                 break;
1118
1119         default:
1120                 /* Unless we get some strange error wait for the task abort to complete
1121                  * TODO: Should there be a state change for this completion?
1122                  */
1123                 break;
1124         }
1125
1126         return SCI_SUCCESS;
1127 }
1128
1129 static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request *sci_req,
1130                                                        u32 completion_code)
1131 {
1132         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1133         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
1134                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
1135                                             SCI_SUCCESS);
1136
1137                 sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP);
1138                 break;
1139         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
1140                 /* Currently, the decision is to simply allow the task request
1141                  * to timeout if the task IU wasn't received successfully.
1142                  * There is a potential for receiving multiple task responses if
1143                  * we decide to send the task IU again.
1144                  */
1145                 dev_warn(scic_to_dev(sci_req->owning_controller),
1146                          "%s: TaskRequest:0x%p CompletionCode:%x - "
1147                          "ACK/NAK timeout\n", __func__, sci_req,
1148                          completion_code);
1149
1150                 sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP);
1151                 break;
1152         default:
1153                 /*
1154                  * All other completion status cause the IO to be complete.
1155                  * If a NAK was received, then it is up to the user to retry
1156                  * the request.
1157                  */
1158                 scic_sds_request_set_status(sci_req,
1159                         SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
1160                         SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1161
1162                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1163                 break;
1164         }
1165
1166         return SCI_SUCCESS;
1167 }
1168
1169 static enum sci_status
1170 smp_request_await_response_tc_event(struct scic_sds_request *sci_req,
1171                                     u32 completion_code)
1172 {
1173         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1174         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
1175                 /* In the AWAIT RESPONSE state, any TC completion is
1176                  * unexpected.  but if the TC has success status, we
1177                  * complete the IO anyway.
1178                  */
1179                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
1180                                             SCI_SUCCESS);
1181
1182                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1183                 break;
1184
1185         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
1186         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
1187         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
1188         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
1189                 /* These status has been seen in a specific LSI
1190                  * expander, which sometimes is not able to send smp
1191                  * response within 2 ms. This causes our hardware break
1192                  * the connection and set TC completion with one of
1193                  * these SMP_XXX_XX_ERR status. For these type of error,
1194                  * we ask scic user to retry the request.
1195                  */
1196                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR,
1197                                             SCI_FAILURE_RETRY_REQUIRED);
1198
1199                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1200                 break;
1201
1202         default:
1203                 /* All other completion status cause the IO to be complete.  If a NAK
1204                  * was received, then it is up to the user to retry the request
1205                  */
1206                 scic_sds_request_set_status(sci_req,
1207                                             SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
1208                                             SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1209
1210                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1211                 break;
1212         }
1213
1214         return SCI_SUCCESS;
1215 }
1216
1217 static enum sci_status
1218 smp_request_await_tc_event(struct scic_sds_request *sci_req,
1219                            u32 completion_code)
1220 {
1221         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1222         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
1223                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
1224                                             SCI_SUCCESS);
1225
1226                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1227                 break;
1228         default:
1229                 /* All other completion status cause the IO to be
1230                  * complete.  If a NAK was received, then it is up to
1231                  * the user to retry the request.
1232                  */
1233                 scic_sds_request_set_status(sci_req,
1234                                             SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
1235                                             SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1236
1237                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1238                 break;
1239         }
1240
1241         return SCI_SUCCESS;
1242 }
1243
1244 void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *req,
1245                                      u16 ncq_tag)
1246 {
1247         /**
1248          * @note This could be made to return an error to the user if the user
1249          *       attempts to set the NCQ tag in the wrong state.
1250          */
1251         req->task_context_buffer->type.stp.ncq_tag = ncq_tag;
1252 }
1253
1254 /**
1255  *
1256  * @sci_req:
1257  *
1258  * Get the next SGL element from the request. - Check on which SGL element pair
1259  * we are working - if working on SLG pair element A - advance to element B -
1260  * else - check to see if there are more SGL element pairs for this IO request
1261  * - if there are more SGL element pairs - advance to the next pair and return
1262  * element A struct scu_sgl_element*
1263  */
1264 static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req)
1265 {
1266         struct scu_sgl_element *current_sgl;
1267         struct scic_sds_request *sci_req = to_sci_req(stp_req);
1268         struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current;
1269
1270         if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) {
1271                 if (pio_sgl->sgl_pair->B.address_lower == 0 &&
1272                     pio_sgl->sgl_pair->B.address_upper == 0) {
1273                         current_sgl = NULL;
1274                 } else {
1275                         pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B;
1276                         current_sgl = &pio_sgl->sgl_pair->B;
1277                 }
1278         } else {
1279                 if (pio_sgl->sgl_pair->next_pair_lower == 0 &&
1280                     pio_sgl->sgl_pair->next_pair_upper == 0) {
1281                         current_sgl = NULL;
1282                 } else {
1283                         u64 phys_addr;
1284
1285                         phys_addr = pio_sgl->sgl_pair->next_pair_upper;
1286                         phys_addr <<= 32;
1287                         phys_addr |= pio_sgl->sgl_pair->next_pair_lower;
1288
1289                         pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr);
1290                         pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A;
1291                         current_sgl = &pio_sgl->sgl_pair->A;
1292                 }
1293         }
1294
1295         return current_sgl;
1296 }
1297
1298 static enum sci_status
1299 stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req,
1300                                         u32 completion_code)
1301 {
1302         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1303         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
1304                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
1305                                             SCI_SUCCESS);
1306
1307                 sci_change_state(&sci_req->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H);
1308                 break;
1309
1310         default:
1311                 /* All other completion status cause the IO to be
1312                  * complete.  If a NAK was received, then it is up to
1313                  * the user to retry the request.
1314                  */
1315                 scic_sds_request_set_status(sci_req,
1316                                             SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
1317                                             SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1318
1319                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1320                 break;
1321         }
1322
1323         return SCI_SUCCESS;
1324 }
1325
1326 #define SCU_MAX_FRAME_BUFFER_SIZE  0x400  /* 1K is the maximum SCU frame data payload */
1327
1328 /* transmit DATA_FIS from (current sgl + offset) for input
1329  * parameter length. current sgl and offset is alreay stored in the IO request
1330  */
1331 static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame(
1332         struct scic_sds_request *sci_req,
1333         u32 length)
1334 {
1335         struct scic_sds_controller *scic = sci_req->owning_controller;
1336         struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
1337         struct scu_task_context *task_context;
1338         struct scu_sgl_element *current_sgl;
1339
1340         /* Recycle the TC and reconstruct it for sending out DATA FIS containing
1341          * for the data from current_sgl+offset for the input length
1342          */
1343         task_context = scic_sds_controller_get_task_context_buffer(scic,
1344                                                                    sci_req->io_tag);
1345
1346         if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A)
1347                 current_sgl = &stp_req->type.pio.request_current.sgl_pair->A;
1348         else
1349                 current_sgl = &stp_req->type.pio.request_current.sgl_pair->B;
1350
1351         /* update the TC */
1352         task_context->command_iu_upper = current_sgl->address_upper;
1353         task_context->command_iu_lower = current_sgl->address_lower;
1354         task_context->transfer_length_bytes = length;
1355         task_context->type.stp.fis_type = FIS_DATA;
1356
1357         /* send the new TC out. */
1358         return scic_controller_continue_io(sci_req);
1359 }
1360
1361 static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req)
1362 {
1363
1364         struct scu_sgl_element *current_sgl;
1365         u32 sgl_offset;
1366         u32 remaining_bytes_in_current_sgl = 0;
1367         enum sci_status status = SCI_SUCCESS;
1368         struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
1369
1370         sgl_offset = stp_req->type.pio.request_current.sgl_offset;
1371
1372         if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) {
1373                 current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A);
1374                 remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset;
1375         } else {
1376                 current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B);
1377                 remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset;
1378         }
1379
1380
1381         if (stp_req->type.pio.pio_transfer_bytes > 0) {
1382                 if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) {
1383                         /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */
1384                         status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl);
1385                         if (status == SCI_SUCCESS) {
1386                                 stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl;
1387
1388                                 /* update the current sgl, sgl_offset and save for future */
1389                                 current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req);
1390                                 sgl_offset = 0;
1391                         }
1392                 } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) {
1393                         /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */
1394                         scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes);
1395
1396                         if (status == SCI_SUCCESS) {
1397                                 /* Sgl offset will be adjusted and saved for future */
1398                                 sgl_offset += stp_req->type.pio.pio_transfer_bytes;
1399                                 current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes;
1400                                 stp_req->type.pio.pio_transfer_bytes = 0;
1401                         }
1402                 }
1403         }
1404
1405         if (status == SCI_SUCCESS) {
1406                 stp_req->type.pio.request_current.sgl_offset = sgl_offset;
1407         }
1408
1409         return status;
1410 }
1411
1412 /**
1413  *
1414  * @stp_request: The request that is used for the SGL processing.
1415  * @data_buffer: The buffer of data to be copied.
1416  * @length: The length of the data transfer.
1417  *
1418  * Copy the data from the buffer for the length specified to the IO reqeust SGL
1419  * specified data region. enum sci_status
1420  */
1421 static enum sci_status
1422 scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req,
1423                                                   u8 *data_buf, u32 len)
1424 {
1425         struct scic_sds_request *sci_req;
1426         struct isci_request *ireq;
1427         u8 *src_addr;
1428         int copy_len;
1429         struct sas_task *task;
1430         struct scatterlist *sg;
1431         void *kaddr;
1432         int total_len = len;
1433
1434         sci_req = to_sci_req(stp_req);
1435         ireq = sci_req_to_ireq(sci_req);
1436         task = isci_request_access_task(ireq);
1437         src_addr = data_buf;
1438
1439         if (task->num_scatter > 0) {
1440                 sg = task->scatter;
1441
1442                 while (total_len > 0) {
1443                         struct page *page = sg_page(sg);
1444
1445                         copy_len = min_t(int, total_len, sg_dma_len(sg));
1446                         kaddr = kmap_atomic(page, KM_IRQ0);
1447                         memcpy(kaddr + sg->offset, src_addr, copy_len);
1448                         kunmap_atomic(kaddr, KM_IRQ0);
1449                         total_len -= copy_len;
1450                         src_addr += copy_len;
1451                         sg = sg_next(sg);
1452                 }
1453         } else {
1454                 BUG_ON(task->total_xfer_len < total_len);
1455                 memcpy(task->scatter, src_addr, total_len);
1456         }
1457
1458         return SCI_SUCCESS;
1459 }
1460
1461 /**
1462  *
1463  * @sci_req: The PIO DATA IN request that is to receive the data.
1464  * @data_buffer: The buffer to copy from.
1465  *
1466  * Copy the data buffer to the io request data region. enum sci_status
1467  */
1468 static enum sci_status scic_sds_stp_request_pio_data_in_copy_data(
1469         struct scic_sds_stp_request *sci_req,
1470         u8 *data_buffer)
1471 {
1472         enum sci_status status;
1473
1474         /*
1475          * If there is less than 1K remaining in the transfer request
1476          * copy just the data for the transfer */
1477         if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) {
1478                 status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
1479                         sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes);
1480
1481                 if (status == SCI_SUCCESS)
1482                         sci_req->type.pio.pio_transfer_bytes = 0;
1483         } else {
1484                 /* We are transfering the whole frame so copy */
1485                 status = scic_sds_stp_request_pio_data_in_copy_data_buffer(
1486                         sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE);
1487
1488                 if (status == SCI_SUCCESS)
1489                         sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE;
1490         }
1491
1492         return status;
1493 }
1494
1495 static enum sci_status
1496 stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req,
1497                                               u32 completion_code)
1498 {
1499         enum sci_status status = SCI_SUCCESS;
1500
1501         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1502         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
1503                 scic_sds_request_set_status(sci_req,
1504                                             SCU_TASK_DONE_GOOD,
1505                                             SCI_SUCCESS);
1506
1507                 sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
1508                 break;
1509
1510         default:
1511                 /* All other completion status cause the IO to be
1512                  * complete.  If a NAK was received, then it is up to
1513                  * the user to retry the request.
1514                  */
1515                 scic_sds_request_set_status(sci_req,
1516                                             SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
1517                                             SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1518
1519                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1520                 break;
1521         }
1522
1523         return status;
1524 }
1525
1526 static enum sci_status
1527 pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req,
1528                               u32 completion_code)
1529 {
1530         enum sci_status status = SCI_SUCCESS;
1531         bool all_frames_transferred = false;
1532         struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
1533
1534         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
1535         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
1536                 /* Transmit data */
1537                 if (stp_req->type.pio.pio_transfer_bytes != 0) {
1538                         status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req);
1539                         if (status == SCI_SUCCESS) {
1540                                 if (stp_req->type.pio.pio_transfer_bytes == 0)
1541                                         all_frames_transferred = true;
1542                         }
1543                 } else if (stp_req->type.pio.pio_transfer_bytes == 0) {
1544                         /*
1545                          * this will happen if the all data is written at the
1546                          * first time after the pio setup fis is received
1547                          */
1548                         all_frames_transferred  = true;
1549                 }
1550
1551                 /* all data transferred. */
1552                 if (all_frames_transferred) {
1553                         /*
1554                          * Change the state to SCI_REQ_STP_PIO_DATA_IN
1555                          * and wait for PIO_SETUP fis / or D2H REg fis. */
1556                         sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
1557                 }
1558                 break;
1559
1560         default:
1561                 /*
1562                  * All other completion status cause the IO to be complete.
1563                  * If a NAK was received, then it is up to the user to retry
1564                  * the request.
1565                  */
1566                 scic_sds_request_set_status(
1567                         sci_req,
1568                         SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
1569                         SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1570
1571                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1572                 break;
1573         }
1574
1575         return status;
1576 }
1577
1578 static void scic_sds_stp_request_udma_complete_request(
1579         struct scic_sds_request *request,
1580         u32 scu_status,
1581         enum sci_status sci_status)
1582 {
1583         scic_sds_request_set_status(request, scu_status, sci_status);
1584         sci_change_state(&request->sm, SCI_REQ_COMPLETED);
1585 }
1586
1587 static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req,
1588                                                                        u32 frame_index)
1589 {
1590         struct scic_sds_controller *scic = sci_req->owning_controller;
1591         struct dev_to_host_fis *frame_header;
1592         enum sci_status status;
1593         u32 *frame_buffer;
1594
1595         status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1596                                                                frame_index,
1597                                                                (void **)&frame_header);
1598
1599         if ((status == SCI_SUCCESS) &&
1600             (frame_header->fis_type == FIS_REGD2H)) {
1601                 scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1602                                                               frame_index,
1603                                                               (void **)&frame_buffer);
1604
1605                 scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
1606                                                        frame_header,
1607                                                        frame_buffer);
1608         }
1609
1610         scic_sds_controller_release_frame(scic, frame_index);
1611
1612         return status;
1613 }
1614
1615 enum sci_status
1616 scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req,
1617                                   u32 frame_index)
1618 {
1619         struct scic_sds_controller *scic = sci_req->owning_controller;
1620         struct scic_sds_stp_request *stp_req = &sci_req->stp.req;
1621         enum sci_base_request_states state;
1622         enum sci_status status;
1623         ssize_t word_cnt;
1624
1625         state = sci_req->sm.current_state_id;
1626         switch (state)  {
1627         case SCI_REQ_STARTED: {
1628                 struct ssp_frame_hdr ssp_hdr;
1629                 void *frame_header;
1630
1631                 scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1632                                                               frame_index,
1633                                                               &frame_header);
1634
1635                 word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32);
1636                 sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt);
1637
1638                 if (ssp_hdr.frame_type == SSP_RESPONSE) {
1639                         struct ssp_response_iu *resp_iu;
1640                         ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);
1641
1642                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1643                                                                       frame_index,
1644                                                                       (void **)&resp_iu);
1645
1646                         sci_swab32_cpy(&sci_req->ssp.rsp, resp_iu, word_cnt);
1647
1648                         resp_iu = &sci_req->ssp.rsp;
1649
1650                         if (resp_iu->datapres == 0x01 ||
1651                             resp_iu->datapres == 0x02) {
1652                                 scic_sds_request_set_status(sci_req,
1653                                                             SCU_TASK_DONE_CHECK_RESPONSE,
1654                                                             SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1655                         } else
1656                                 scic_sds_request_set_status(sci_req,
1657                                                             SCU_TASK_DONE_GOOD,
1658                                                             SCI_SUCCESS);
1659                 } else {
1660                         /* not a response frame, why did it get forwarded? */
1661                         dev_err(scic_to_dev(scic),
1662                                 "%s: SCIC IO Request 0x%p received unexpected "
1663                                 "frame %d type 0x%02x\n", __func__, sci_req,
1664                                 frame_index, ssp_hdr.frame_type);
1665                 }
1666
1667                 /*
1668                  * In any case we are done with this frame buffer return it to
1669                  * the controller
1670                  */
1671                 scic_sds_controller_release_frame(scic, frame_index);
1672
1673                 return SCI_SUCCESS;
1674         }
1675
1676         case SCI_REQ_TASK_WAIT_TC_RESP:
1677                 scic_sds_io_request_copy_response(sci_req);
1678                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1679                 scic_sds_controller_release_frame(scic,frame_index);
1680                 return SCI_SUCCESS;
1681
1682         case SCI_REQ_SMP_WAIT_RESP: {
1683                 struct smp_resp *rsp_hdr = &sci_req->smp.rsp;
1684                 void *frame_header;
1685
1686                 scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1687                                                               frame_index,
1688                                                               &frame_header);
1689
1690                 /* byte swap the header. */
1691                 word_cnt = SMP_RESP_HDR_SZ / sizeof(u32);
1692                 sci_swab32_cpy(rsp_hdr, frame_header, word_cnt);
1693
1694                 if (rsp_hdr->frame_type == SMP_RESPONSE) {
1695                         void *smp_resp;
1696
1697                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1698                                                                       frame_index,
1699                                                                       &smp_resp);
1700
1701                         word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) /
1702                                 sizeof(u32);
1703
1704                         sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ,
1705                                        smp_resp, word_cnt);
1706
1707                         scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
1708                                                     SCI_SUCCESS);
1709
1710                         sci_change_state(&sci_req->sm, SCI_REQ_SMP_WAIT_TC_COMP);
1711                 } else {
1712                         /*
1713                          * This was not a response frame why did it get
1714                          * forwarded?
1715                          */
1716                         dev_err(scic_to_dev(scic),
1717                                 "%s: SCIC SMP Request 0x%p received unexpected "
1718                                 "frame %d type 0x%02x\n",
1719                                 __func__,
1720                                 sci_req,
1721                                 frame_index,
1722                                 rsp_hdr->frame_type);
1723
1724                         scic_sds_request_set_status(sci_req,
1725                                                     SCU_TASK_DONE_SMP_FRM_TYPE_ERR,
1726                                                     SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
1727
1728                         sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1729                 }
1730
1731                 scic_sds_controller_release_frame(scic, frame_index);
1732
1733                 return SCI_SUCCESS;
1734         }
1735
1736         case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
1737                 return scic_sds_stp_request_udma_general_frame_handler(sci_req,
1738                                                                        frame_index);
1739
1740         case SCI_REQ_STP_UDMA_WAIT_D2H:
1741                 /* Use the general frame handler to copy the resposne data */
1742                 status = scic_sds_stp_request_udma_general_frame_handler(sci_req,
1743                                                                          frame_index);
1744
1745                 if (status != SCI_SUCCESS)
1746                         return status;
1747
1748                 scic_sds_stp_request_udma_complete_request(sci_req,
1749                                                            SCU_TASK_DONE_CHECK_RESPONSE,
1750                                                            SCI_FAILURE_IO_RESPONSE_VALID);
1751
1752                 return SCI_SUCCESS;
1753
1754         case SCI_REQ_STP_NON_DATA_WAIT_D2H: {
1755                 struct dev_to_host_fis *frame_header;
1756                 u32 *frame_buffer;
1757
1758                 status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1759                                                                        frame_index,
1760                                                                        (void **)&frame_header);
1761
1762                 if (status != SCI_SUCCESS) {
1763                         dev_err(scic_to_dev(scic),
1764                                 "%s: SCIC IO Request 0x%p could not get frame "
1765                                 "header for frame index %d, status %x\n",
1766                                 __func__,
1767                                 stp_req,
1768                                 frame_index,
1769                                 status);
1770
1771                         return status;
1772                 }
1773
1774                 switch (frame_header->fis_type) {
1775                 case FIS_REGD2H:
1776                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1777                                                                       frame_index,
1778                                                                       (void **)&frame_buffer);
1779
1780                         scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
1781                                                                frame_header,
1782                                                                frame_buffer);
1783
1784                         /* The command has completed with error */
1785                         scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE,
1786                                                     SCI_FAILURE_IO_RESPONSE_VALID);
1787                         break;
1788
1789                 default:
1790                         dev_warn(scic_to_dev(scic),
1791                                  "%s: IO Request:0x%p Frame Id:%d protocol "
1792                                   "violation occurred\n", __func__, stp_req,
1793                                   frame_index);
1794
1795                         scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS,
1796                                                     SCI_FAILURE_PROTOCOL_VIOLATION);
1797                         break;
1798                 }
1799
1800                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1801
1802                 /* Frame has been decoded return it to the controller */
1803                 scic_sds_controller_release_frame(scic, frame_index);
1804
1805                 return status;
1806         }
1807
1808         case SCI_REQ_STP_PIO_WAIT_FRAME: {
1809                 struct isci_request *ireq = sci_req_to_ireq(sci_req);
1810                 struct sas_task *task = isci_request_access_task(ireq);
1811                 struct dev_to_host_fis *frame_header;
1812                 u32 *frame_buffer;
1813
1814                 status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1815                                                                        frame_index,
1816                                                                        (void **)&frame_header);
1817
1818                 if (status != SCI_SUCCESS) {
1819                         dev_err(scic_to_dev(scic),
1820                                 "%s: SCIC IO Request 0x%p could not get frame "
1821                                 "header for frame index %d, status %x\n",
1822                                 __func__, stp_req, frame_index, status);
1823                         return status;
1824                 }
1825
1826                 switch (frame_header->fis_type) {
1827                 case FIS_PIO_SETUP:
1828                         /* Get from the frame buffer the PIO Setup Data */
1829                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1830                                                                       frame_index,
1831                                                                       (void **)&frame_buffer);
1832
1833                         /* Get the data from the PIO Setup The SCU Hardware
1834                          * returns first word in the frame_header and the rest
1835                          * of the data is in the frame buffer so we need to
1836                          * back up one dword
1837                          */
1838
1839                         /* transfer_count: first 16bits in the 4th dword */
1840                         stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff;
1841
1842                         /* ending_status: 4th byte in the 3rd dword */
1843                         stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff;
1844
1845                         scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
1846                                                                frame_header,
1847                                                                frame_buffer);
1848
1849                         sci_req->stp.rsp.status = stp_req->type.pio.ending_status;
1850
1851                         /* The next state is dependent on whether the
1852                          * request was PIO Data-in or Data out
1853                          */
1854                         if (task->data_dir == DMA_FROM_DEVICE) {
1855                                 sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_IN);
1856                         } else if (task->data_dir == DMA_TO_DEVICE) {
1857                                 /* Transmit data */
1858                                 status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req);
1859                                 if (status != SCI_SUCCESS)
1860                                         break;
1861                                 sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_OUT);
1862                         }
1863                         break;
1864
1865                 case FIS_SETDEVBITS:
1866                         sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
1867                         break;
1868
1869                 case FIS_REGD2H:
1870                         if (frame_header->status & ATA_BUSY) {
1871                                 /*
1872                                  * Now why is the drive sending a D2H Register
1873                                  * FIS when it is still busy?  Do nothing since
1874                                  * we are still in the right state.
1875                                  */
1876                                 dev_dbg(scic_to_dev(scic),
1877                                         "%s: SCIC PIO Request 0x%p received "
1878                                         "D2H Register FIS with BSY status "
1879                                         "0x%x\n",
1880                                         __func__,
1881                                         stp_req,
1882                                         frame_header->status);
1883                                 break;
1884                         }
1885
1886                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1887                                                                       frame_index,
1888                                                                       (void **)&frame_buffer);
1889
1890                         scic_sds_controller_copy_sata_response(&sci_req->stp.req,
1891                                                                frame_header,
1892                                                                frame_buffer);
1893
1894                         scic_sds_request_set_status(sci_req,
1895                                                     SCU_TASK_DONE_CHECK_RESPONSE,
1896                                                     SCI_FAILURE_IO_RESPONSE_VALID);
1897
1898                         sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1899                         break;
1900
1901                 default:
1902                         /* FIXME: what do we do here? */
1903                         break;
1904                 }
1905
1906                 /* Frame is decoded return it to the controller */
1907                 scic_sds_controller_release_frame(scic, frame_index);
1908
1909                 return status;
1910         }
1911
1912         case SCI_REQ_STP_PIO_DATA_IN: {
1913                 struct dev_to_host_fis *frame_header;
1914                 struct sata_fis_data *frame_buffer;
1915
1916                 status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1917                                                                        frame_index,
1918                                                                        (void **)&frame_header);
1919
1920                 if (status != SCI_SUCCESS) {
1921                         dev_err(scic_to_dev(scic),
1922                                 "%s: SCIC IO Request 0x%p could not get frame "
1923                                 "header for frame index %d, status %x\n",
1924                                 __func__,
1925                                 stp_req,
1926                                 frame_index,
1927                                 status);
1928                         return status;
1929                 }
1930
1931                 if (frame_header->fis_type != FIS_DATA) {
1932                         dev_err(scic_to_dev(scic),
1933                                 "%s: SCIC PIO Request 0x%p received frame %d "
1934                                 "with fis type 0x%02x when expecting a data "
1935                                 "fis.\n",
1936                                 __func__,
1937                                 stp_req,
1938                                 frame_index,
1939                                 frame_header->fis_type);
1940
1941                         scic_sds_request_set_status(sci_req,
1942                                                     SCU_TASK_DONE_GOOD,
1943                                                     SCI_FAILURE_IO_REQUIRES_SCSI_ABORT);
1944
1945                         sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1946
1947                         /* Frame is decoded return it to the controller */
1948                         scic_sds_controller_release_frame(scic, frame_index);
1949                         return status;
1950                 }
1951
1952                 if (stp_req->type.pio.request_current.sgl_pair == NULL) {
1953                         sci_req->saved_rx_frame_index = frame_index;
1954                         stp_req->type.pio.pio_transfer_bytes = 0;
1955                 } else {
1956                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
1957                                                                       frame_index,
1958                                                                       (void **)&frame_buffer);
1959
1960                         status = scic_sds_stp_request_pio_data_in_copy_data(stp_req,
1961                                                                             (u8 *)frame_buffer);
1962
1963                         /* Frame is decoded return it to the controller */
1964                         scic_sds_controller_release_frame(scic, frame_index);
1965                 }
1966
1967                 /* Check for the end of the transfer, are there more
1968                  * bytes remaining for this data transfer
1969                  */
1970                 if (status != SCI_SUCCESS ||
1971                     stp_req->type.pio.pio_transfer_bytes != 0)
1972                         return status;
1973
1974                 if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) {
1975                         scic_sds_request_set_status(sci_req,
1976                                                     SCU_TASK_DONE_CHECK_RESPONSE,
1977                                                     SCI_FAILURE_IO_RESPONSE_VALID);
1978
1979                         sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
1980                 } else {
1981                         sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
1982                 }
1983                 return status;
1984         }
1985
1986         case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: {
1987                 struct dev_to_host_fis *frame_header;
1988                 u32 *frame_buffer;
1989
1990                 status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
1991                                                                        frame_index,
1992                                                                        (void **)&frame_header);
1993                 if (status != SCI_SUCCESS) {
1994                         dev_err(scic_to_dev(scic),
1995                                 "%s: SCIC IO Request 0x%p could not get frame "
1996                                 "header for frame index %d, status %x\n",
1997                                 __func__,
1998                                 stp_req,
1999                                 frame_index,
2000                                 status);
2001                         return status;
2002                 }
2003
2004                 switch (frame_header->fis_type) {
2005                 case FIS_REGD2H:
2006                         scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control,
2007                                                                       frame_index,
2008                                                                       (void **)&frame_buffer);
2009
2010                         scic_sds_controller_copy_sata_response(&sci_req->stp.rsp,
2011                                                                frame_header,
2012                                                                frame_buffer);
2013
2014                         /* The command has completed with error */
2015                         scic_sds_request_set_status(sci_req,
2016                                                     SCU_TASK_DONE_CHECK_RESPONSE,
2017                                                     SCI_FAILURE_IO_RESPONSE_VALID);
2018                         break;
2019
2020                 default:
2021                         dev_warn(scic_to_dev(scic),
2022                                  "%s: IO Request:0x%p Frame Id:%d protocol "
2023                                  "violation occurred\n",
2024                                  __func__,
2025                                  stp_req,
2026                                  frame_index);
2027
2028                         scic_sds_request_set_status(sci_req,
2029                                                     SCU_TASK_DONE_UNEXP_FIS,
2030                                                     SCI_FAILURE_PROTOCOL_VIOLATION);
2031                         break;
2032                 }
2033
2034                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
2035
2036                 /* Frame has been decoded return it to the controller */
2037                 scic_sds_controller_release_frame(scic, frame_index);
2038
2039                 return status;
2040         }
2041         case SCI_REQ_ABORTING:
2042                 /*
2043                  * TODO: Is it even possible to get an unsolicited frame in the
2044                  * aborting state?
2045                  */
2046                 scic_sds_controller_release_frame(scic, frame_index);
2047                 return SCI_SUCCESS;
2048
2049         default:
2050                 dev_warn(scic_to_dev(scic),
2051                          "%s: SCIC IO Request given unexpected frame %x while "
2052                          "in state %d\n",
2053                          __func__,
2054                          frame_index,
2055                          state);
2056
2057                 scic_sds_controller_release_frame(scic, frame_index);
2058                 return SCI_FAILURE_INVALID_STATE;
2059         }
2060 }
2061
2062 static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request *sci_req,
2063                                                        u32 completion_code)
2064 {
2065         enum sci_status status = SCI_SUCCESS;
2066
2067         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
2068         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
2069                 scic_sds_stp_request_udma_complete_request(sci_req,
2070                                                            SCU_TASK_DONE_GOOD,
2071                                                            SCI_SUCCESS);
2072                 break;
2073         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS):
2074         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
2075                 /* We must check ther response buffer to see if the D2H
2076                  * Register FIS was received before we got the TC
2077                  * completion.
2078                  */
2079                 if (sci_req->stp.rsp.fis_type == FIS_REGD2H) {
2080                         scic_sds_remote_device_suspend(sci_req->target_device,
2081                                 SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
2082
2083                         scic_sds_stp_request_udma_complete_request(sci_req,
2084                                                                    SCU_TASK_DONE_CHECK_RESPONSE,
2085                                                                    SCI_FAILURE_IO_RESPONSE_VALID);
2086                 } else {
2087                         /* If we have an error completion status for the
2088                          * TC then we can expect a D2H register FIS from
2089                          * the device so we must change state to wait
2090                          * for it
2091                          */
2092                         sci_change_state(&sci_req->sm, SCI_REQ_STP_UDMA_WAIT_D2H);
2093                 }
2094                 break;
2095
2096         /* TODO Check to see if any of these completion status need to
2097          * wait for the device to host register fis.
2098          */
2099         /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR
2100          * - this comes only for B0
2101          */
2102         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN):
2103         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
2104         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
2105         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
2106         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
2107                 scic_sds_remote_device_suspend(sci_req->target_device,
2108                         SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
2109         /* Fall through to the default case */
2110         default:
2111                 /* All other completion status cause the IO to be complete. */
2112                 scic_sds_stp_request_udma_complete_request(sci_req,
2113                                         SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
2114                                         SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
2115                 break;
2116         }
2117
2118         return status;
2119 }
2120
2121 static enum sci_status
2122 stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_req,
2123                                                    u32 completion_code)
2124 {
2125         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
2126         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
2127                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
2128                                             SCI_SUCCESS);
2129
2130                 sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG);
2131                 break;
2132
2133         default:
2134                 /*
2135                  * All other completion status cause the IO to be complete.
2136                  * If a NAK was received, then it is up to the user to retry
2137                  * the request.
2138                  */
2139                 scic_sds_request_set_status(sci_req,
2140                                             SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
2141                                             SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
2142
2143                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
2144                 break;
2145         }
2146
2147         return SCI_SUCCESS;
2148 }
2149
2150 static enum sci_status
2151 stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct scic_sds_request *sci_req,
2152                                                      u32 completion_code)
2153 {
2154         switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
2155         case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
2156                 scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD,
2157                                             SCI_SUCCESS);
2158
2159                 sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H);
2160                 break;
2161
2162         default:
2163                 /* All other completion status cause the IO to be complete.  If
2164                  * a NAK was received, then it is up to the user to retry the
2165                  * request.
2166                  */
2167                 scic_sds_request_set_status(sci_req,
2168                         SCU_NORMALIZE_COMPLETION_STATUS(completion_code),
2169                         SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR);
2170
2171                 sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED);
2172                 break;
2173         }
2174
2175         return SCI_SUCCESS;
2176 }
2177
2178 enum sci_status
2179 scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req,
2180                                   u32 completion_code)
2181 {
2182         enum sci_base_request_states state;
2183         struct scic_sds_controller *scic = sci_req->owning_controller;
2184
2185         state = sci_req->sm.current_state_id;
2186
2187         switch (state) {
2188         case SCI_REQ_STARTED:
2189                 return request_started_state_tc_event(sci_req, completion_code);
2190
2191         case SCI_REQ_TASK_WAIT_TC_COMP:
2192                 return ssp_task_request_await_tc_event(sci_req,
2193                                                        completion_code);
2194
2195         case SCI_REQ_SMP_WAIT_RESP:
2196                 return smp_request_await_response_tc_event(sci_req,
2197                                                            completion_code);
2198
2199         case SCI_REQ_SMP_WAIT_TC_COMP:
2200                 return smp_request_await_tc_event(sci_req, completion_code);
2201
2202         case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
2203                 return stp_request_udma_await_tc_event(sci_req,
2204                                                        completion_code);
2205
2206         case SCI_REQ_STP_NON_DATA_WAIT_H2D:
2207                 return stp_request_non_data_await_h2d_tc_event(sci_req,
2208                                                                completion_code);
2209
2210         case SCI_REQ_STP_PIO_WAIT_H2D:
2211                 return stp_request_pio_await_h2d_completion_tc_event(sci_req,
2212                                                                      completion_code);
2213
2214         case SCI_REQ_STP_PIO_DATA_OUT:
2215                 return pio_data_out_tx_done_tc_event(sci_req, completion_code);
2216
2217         case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
2218                 return stp_request_soft_reset_await_h2d_asserted_tc_event(sci_req,
2219                                                                           completion_code);
2220
2221         case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
2222                 return stp_request_soft_reset_await_h2d_diagnostic_tc_event(sci_req,
2223                                                                             completion_code);
2224
2225         case SCI_REQ_ABORTING:
2226                 return request_aborting_state_tc_event(sci_req,
2227                                                        completion_code);
2228
2229         default:
2230                 dev_warn(scic_to_dev(scic),
2231                          "%s: SCIC IO Request given task completion "
2232                          "notification %x while in wrong state %d\n",
2233                          __func__,
2234                          completion_code,
2235                          state);
2236                 return SCI_FAILURE_INVALID_STATE;
2237         }
2238 }
2239
2240 /**
2241  * isci_request_process_response_iu() - This function sets the status and
2242  *    response iu, in the task struct, from the request object for the upper
2243  *    layer driver.
2244  * @sas_task: This parameter is the task struct from the upper layer driver.
2245  * @resp_iu: This parameter points to the response iu of the completed request.
2246  * @dev: This parameter specifies the linux device struct.
2247  *
2248  * none.
2249  */
2250 static void isci_request_process_response_iu(
2251         struct sas_task *task,
2252         struct ssp_response_iu *resp_iu,
2253         struct device *dev)
2254 {
2255         dev_dbg(dev,
2256                 "%s: resp_iu = %p "
2257                 "resp_iu->status = 0x%x,\nresp_iu->datapres = %d "
2258                 "resp_iu->response_data_len = %x, "
2259                 "resp_iu->sense_data_len = %x\nrepsonse data: ",
2260                 __func__,
2261                 resp_iu,
2262                 resp_iu->status,
2263                 resp_iu->datapres,
2264                 resp_iu->response_data_len,
2265                 resp_iu->sense_data_len);
2266
2267         task->task_status.stat = resp_iu->status;
2268
2269         /* libsas updates the task status fields based on the response iu. */
2270         sas_ssp_task_response(dev, task, resp_iu);
2271 }
2272
2273 /**
2274  * isci_request_set_open_reject_status() - This function prepares the I/O
2275  *    completion for OPEN_REJECT conditions.
2276  * @request: This parameter is the completed isci_request object.
2277  * @response_ptr: This parameter specifies the service response for the I/O.
2278  * @status_ptr: This parameter specifies the exec status for the I/O.
2279  * @complete_to_host_ptr: This parameter specifies the action to be taken by
2280  *    the LLDD with respect to completing this request or forcing an abort
2281  *    condition on the I/O.
2282  * @open_rej_reason: This parameter specifies the encoded reason for the
2283  *    abandon-class reject.
2284  *
2285  * none.
2286  */
2287 static void isci_request_set_open_reject_status(
2288         struct isci_request *request,
2289         struct sas_task *task,
2290         enum service_response *response_ptr,
2291         enum exec_status *status_ptr,
2292         enum isci_completion_selection *complete_to_host_ptr,
2293         enum sas_open_rej_reason open_rej_reason)
2294 {
2295         /* Task in the target is done. */
2296         request->complete_in_target       = true;
2297         *response_ptr                     = SAS_TASK_UNDELIVERED;
2298         *status_ptr                       = SAS_OPEN_REJECT;
2299         *complete_to_host_ptr             = isci_perform_normal_io_completion;
2300         task->task_status.open_rej_reason = open_rej_reason;
2301 }
2302
2303 /**
2304  * isci_request_handle_controller_specific_errors() - This function decodes
2305  *    controller-specific I/O completion error conditions.
2306  * @request: This parameter is the completed isci_request object.
2307  * @response_ptr: This parameter specifies the service response for the I/O.
2308  * @status_ptr: This parameter specifies the exec status for the I/O.
2309  * @complete_to_host_ptr: This parameter specifies the action to be taken by
2310  *    the LLDD with respect to completing this request or forcing an abort
2311  *    condition on the I/O.
2312  *
2313  * none.
2314  */
2315 static void isci_request_handle_controller_specific_errors(
2316         struct isci_remote_device *isci_device,
2317         struct isci_request *request,
2318         struct sas_task *task,
2319         enum service_response *response_ptr,
2320         enum exec_status *status_ptr,
2321         enum isci_completion_selection *complete_to_host_ptr)
2322 {
2323         unsigned int cstatus;
2324
2325         cstatus = request->sci.scu_status;
2326
2327         dev_dbg(&request->isci_host->pdev->dev,
2328                 "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR "
2329                 "- controller status = 0x%x\n",
2330                 __func__, request, cstatus);
2331
2332         /* Decode the controller-specific errors; most
2333          * important is to recognize those conditions in which
2334          * the target may still have a task outstanding that
2335          * must be aborted.
2336          *
2337          * Note that there are SCU completion codes being
2338          * named in the decode below for which SCIC has already
2339          * done work to handle them in a way other than as
2340          * a controller-specific completion code; these are left
2341          * in the decode below for completeness sake.
2342          */
2343         switch (cstatus) {
2344         case SCU_TASK_DONE_DMASETUP_DIRERR:
2345         /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */
2346         case SCU_TASK_DONE_XFERCNT_ERR:
2347                 /* Also SCU_TASK_DONE_SMP_UFI_ERR: */
2348                 if (task->task_proto == SAS_PROTOCOL_SMP) {
2349                         /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */
2350                         *response_ptr = SAS_TASK_COMPLETE;
2351
2352                         /* See if the device has been/is being stopped. Note
2353                          * that we ignore the quiesce state, since we are
2354                          * concerned about the actual device state.
2355                          */
2356                         if ((isci_device->status == isci_stopping) ||
2357                             (isci_device->status == isci_stopped))
2358                                 *status_ptr = SAS_DEVICE_UNKNOWN;
2359                         else
2360                                 *status_ptr = SAS_ABORTED_TASK;
2361
2362                         request->complete_in_target = true;
2363
2364                         *complete_to_host_ptr =
2365                                 isci_perform_normal_io_completion;
2366                 } else {
2367                         /* Task in the target is not done. */
2368                         *response_ptr = SAS_TASK_UNDELIVERED;
2369
2370                         if ((isci_device->status == isci_stopping) ||
2371                             (isci_device->status == isci_stopped))
2372                                 *status_ptr = SAS_DEVICE_UNKNOWN;
2373                         else
2374                                 *status_ptr = SAM_STAT_TASK_ABORTED;
2375
2376                         request->complete_in_target = false;
2377
2378                         *complete_to_host_ptr =
2379                                 isci_perform_error_io_completion;
2380                 }
2381
2382                 break;
2383
2384         case SCU_TASK_DONE_CRC_ERR:
2385         case SCU_TASK_DONE_NAK_CMD_ERR:
2386         case SCU_TASK_DONE_EXCESS_DATA:
2387         case SCU_TASK_DONE_UNEXP_FIS:
2388         /* Also SCU_TASK_DONE_UNEXP_RESP: */
2389         case SCU_TASK_DONE_VIIT_ENTRY_NV:       /* TODO - conditions? */
2390         case SCU_TASK_DONE_IIT_ENTRY_NV:        /* TODO - conditions? */
2391         case SCU_TASK_DONE_RNCNV_OUTBOUND:      /* TODO - conditions? */
2392                 /* These are conditions in which the target
2393                  * has completed the task, so that no cleanup
2394                  * is necessary.
2395                  */
2396                 *response_ptr = SAS_TASK_COMPLETE;
2397
2398                 /* See if the device has been/is being stopped. Note
2399                  * that we ignore the quiesce state, since we are
2400                  * concerned about the actual device state.
2401                  */
2402                 if ((isci_device->status == isci_stopping) ||
2403                     (isci_device->status == isci_stopped))
2404                         *status_ptr = SAS_DEVICE_UNKNOWN;
2405                 else
2406                         *status_ptr = SAS_ABORTED_TASK;
2407
2408                 request->complete_in_target = true;
2409
2410                 *complete_to_host_ptr = isci_perform_normal_io_completion;
2411                 break;
2412
2413
2414         /* Note that the only open reject completion codes seen here will be
2415          * abandon-class codes; all others are automatically retried in the SCU.
2416          */
2417         case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION:
2418
2419                 isci_request_set_open_reject_status(
2420                         request, task, response_ptr, status_ptr,
2421                         complete_to_host_ptr, SAS_OREJ_WRONG_DEST);
2422                 break;
2423
2424         case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION:
2425
2426                 /* Note - the return of AB0 will change when
2427                  * libsas implements detection of zone violations.
2428                  */
2429                 isci_request_set_open_reject_status(
2430                         request, task, response_ptr, status_ptr,
2431                         complete_to_host_ptr, SAS_OREJ_RESV_AB0);
2432                 break;
2433
2434         case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1:
2435
2436                 isci_request_set_open_reject_status(
2437                         request, task, response_ptr, status_ptr,
2438                         complete_to_host_ptr, SAS_OREJ_RESV_AB1);
2439                 break;
2440
2441         case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2:
2442
2443                 isci_request_set_open_reject_status(
2444                         request, task, response_ptr, status_ptr,
2445                         complete_to_host_ptr, SAS_OREJ_RESV_AB2);
2446                 break;
2447
2448         case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3:
2449
2450                 isci_request_set_open_reject_status(
2451                         request, task, response_ptr, status_ptr,
2452                         complete_to_host_ptr, SAS_OREJ_RESV_AB3);
2453                 break;
2454
2455         case SCU_TASK_OPEN_REJECT_BAD_DESTINATION:
2456
2457                 isci_request_set_open_reject_status(
2458                         request, task, response_ptr, status_ptr,
2459                         complete_to_host_ptr, SAS_OREJ_BAD_DEST);
2460                 break;
2461
2462         case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY:
2463
2464                 isci_request_set_open_reject_status(
2465                         request, task, response_ptr, status_ptr,
2466                         complete_to_host_ptr, SAS_OREJ_STP_NORES);
2467                 break;
2468
2469         case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED:
2470
2471                 isci_request_set_open_reject_status(
2472                         request, task, response_ptr, status_ptr,
2473                         complete_to_host_ptr, SAS_OREJ_EPROTO);
2474                 break;
2475
2476         case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED:
2477
2478                 isci_request_set_open_reject_status(
2479                         request, task, response_ptr, status_ptr,
2480                         complete_to_host_ptr, SAS_OREJ_CONN_RATE);
2481                 break;
2482
2483         case SCU_TASK_DONE_LL_R_ERR:
2484         /* Also SCU_TASK_DONE_ACK_NAK_TO: */
2485         case SCU_TASK_DONE_LL_PERR:
2486         case SCU_TASK_DONE_LL_SY_TERM:
2487         /* Also SCU_TASK_DONE_NAK_ERR:*/
2488         case SCU_TASK_DONE_LL_LF_TERM:
2489         /* Also SCU_TASK_DONE_DATA_LEN_ERR: */
2490         case SCU_TASK_DONE_LL_ABORT_ERR:
2491         case SCU_TASK_DONE_SEQ_INV_TYPE:
2492         /* Also SCU_TASK_DONE_UNEXP_XR: */
2493         case SCU_TASK_DONE_XR_IU_LEN_ERR:
2494         case SCU_TASK_DONE_INV_FIS_LEN:
2495         /* Also SCU_TASK_DONE_XR_WD_LEN: */
2496         case SCU_TASK_DONE_SDMA_ERR:
2497         case SCU_TASK_DONE_OFFSET_ERR:
2498         case SCU_TASK_DONE_MAX_PLD_ERR:
2499         case SCU_TASK_DONE_LF_ERR:
2500         case SCU_TASK_DONE_SMP_RESP_TO_ERR:  /* Escalate to dev reset? */
2501         case SCU_TASK_DONE_SMP_LL_RX_ERR:
2502         case SCU_TASK_DONE_UNEXP_DATA:
2503         case SCU_TASK_DONE_UNEXP_SDBFIS:
2504         case SCU_TASK_DONE_REG_ERR:
2505         case SCU_TASK_DONE_SDB_ERR:
2506         case SCU_TASK_DONE_TASK_ABORT:
2507         default:
2508                 /* Task in the target is not done. */
2509                 *response_ptr = SAS_TASK_UNDELIVERED;
2510                 *status_ptr = SAM_STAT_TASK_ABORTED;
2511                 request->complete_in_target = false;
2512
2513                 *complete_to_host_ptr = isci_perform_error_io_completion;
2514                 break;
2515         }
2516 }
2517
2518 /**
2519  * isci_task_save_for_upper_layer_completion() - This function saves the
2520  *    request for later completion to the upper layer driver.
2521  * @host: This parameter is a pointer to the host on which the the request
2522  *    should be queued (either as an error or success).
2523  * @request: This parameter is the completed request.
2524  * @response: This parameter is the response code for the completed task.
2525  * @status: This parameter is the status code for the completed task.
2526  *
2527  * none.
2528  */
2529 static void isci_task_save_for_upper_layer_completion(
2530         struct isci_host *host,
2531         struct isci_request *request,
2532         enum service_response response,
2533         enum exec_status status,
2534         enum isci_completion_selection task_notification_selection)
2535 {
2536         struct sas_task *task = isci_request_access_task(request);
2537
2538         task_notification_selection
2539                 = isci_task_set_completion_status(task, response, status,
2540                                                   task_notification_selection);
2541
2542         /* Tasks aborted specifically by a call to the lldd_abort_task
2543          * function should not be completed to the host in the regular path.
2544          */
2545         switch (task_notification_selection) {
2546
2547         case isci_perform_normal_io_completion:
2548
2549                 /* Normal notification (task_done) */
2550                 dev_dbg(&host->pdev->dev,
2551                         "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n",
2552                         __func__,
2553                         task,
2554                         task->task_status.resp, response,
2555                         task->task_status.stat, status);
2556                 /* Add to the completed list. */
2557                 list_add(&request->completed_node,
2558                          &host->requests_to_complete);
2559
2560                 /* Take the request off the device's pending request list. */
2561                 list_del_init(&request->dev_node);
2562                 break;
2563
2564         case isci_perform_aborted_io_completion:
2565                 /* No notification to libsas because this request is
2566                  * already in the abort path.
2567                  */
2568                 dev_warn(&host->pdev->dev,
2569                          "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n",
2570                          __func__,
2571                          task,
2572                          task->task_status.resp, response,
2573                          task->task_status.stat, status);
2574
2575                 /* Wake up whatever process was waiting for this
2576                  * request to complete.
2577                  */
2578                 WARN_ON(request->io_request_completion == NULL);
2579
2580                 if (request->io_request_completion != NULL) {
2581
2582                         /* Signal whoever is waiting that this
2583                         * request is complete.
2584                         */
2585                         complete(request->io_request_completion);
2586                 }
2587                 break;
2588
2589         case isci_perform_error_io_completion:
2590                 /* Use sas_task_abort */
2591                 dev_warn(&host->pdev->dev,
2592                          "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n",
2593                          __func__,
2594                          task,
2595                          task->task_status.resp, response,
2596                          task->task_status.stat, status);
2597                 /* Add to the aborted list. */
2598                 list_add(&request->completed_node,
2599                          &host->requests_to_errorback);
2600                 break;
2601
2602         default:
2603                 dev_warn(&host->pdev->dev,
2604                          "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n",
2605                          __func__,
2606                          task,
2607                          task->task_status.resp, response,
2608                          task->task_status.stat, status);
2609
2610                 /* Add to the error to libsas list. */
2611                 list_add(&request->completed_node,
2612                          &host->requests_to_errorback);
2613                 break;
2614         }
2615 }
2616
2617 static void isci_request_io_request_complete(struct isci_host *isci_host,
2618                                              struct isci_request *request,
2619                                              enum sci_io_status completion_status)
2620 {
2621         struct sas_task *task = isci_request_access_task(request);
2622         struct ssp_response_iu *resp_iu;
2623         void *resp_buf;
2624         unsigned long task_flags;
2625         struct isci_remote_device *isci_device   = request->isci_device;
2626         enum service_response response       = SAS_TASK_UNDELIVERED;
2627         enum exec_status status         = SAS_ABORTED_TASK;
2628         enum isci_request_status request_status;
2629         enum isci_completion_selection complete_to_host
2630                 = isci_perform_normal_io_completion;
2631
2632         dev_dbg(&isci_host->pdev->dev,
2633                 "%s: request = %p, task = %p,\n"
2634                 "task->data_dir = %d completion_status = 0x%x\n",
2635                 __func__,
2636                 request,
2637                 task,
2638                 task->data_dir,
2639                 completion_status);
2640
2641         spin_lock(&request->state_lock);
2642         request_status = isci_request_get_state(request);
2643
2644         /* Decode the request status.  Note that if the request has been
2645          * aborted by a task management function, we don't care
2646          * what the status is.
2647          */
2648         switch (request_status) {
2649
2650         case aborted:
2651                 /* "aborted" indicates that the request was aborted by a task
2652                  * management function, since once a task management request is
2653                  * perfomed by the device, the request only completes because
2654                  * of the subsequent driver terminate.
2655                  *
2656                  * Aborted also means an external thread is explicitly managing
2657                  * this request, so that we do not complete it up the stack.
2658                  *
2659                  * The target is still there (since the TMF was successful).
2660                  */
2661                 request->complete_in_target = true;
2662                 response = SAS_TASK_COMPLETE;
2663
2664                 /* See if the device has been/is being stopped. Note
2665                  * that we ignore the quiesce state, since we are
2666                  * concerned about the actual device state.
2667                  */
2668                 if ((isci_device->status == isci_stopping)
2669                     || (isci_device->status == isci_stopped)
2670                     )
2671                         status = SAS_DEVICE_UNKNOWN;
2672                 else
2673                         status = SAS_ABORTED_TASK;
2674
2675                 complete_to_host = isci_perform_aborted_io_completion;
2676                 /* This was an aborted request. */
2677
2678                 spin_unlock(&request->state_lock);
2679                 break;
2680
2681         case aborting:
2682                 /* aborting means that the task management function tried and
2683                  * failed to abort the request. We need to note the request
2684                  * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the
2685                  * target as down.
2686                  *
2687                  * Aborting also means an external thread is explicitly managing
2688                  * this request, so that we do not complete it up the stack.
2689                  */
2690                 request->complete_in_target = true;
2691                 response = SAS_TASK_UNDELIVERED;
2692
2693                 if ((isci_device->status == isci_stopping) ||
2694                     (isci_device->status == isci_stopped))
2695                         /* The device has been /is being stopped. Note that
2696                          * we ignore the quiesce state, since we are
2697                          * concerned about the actual device state.
2698                          */
2699                         status = SAS_DEVICE_UNKNOWN;
2700                 else
2701                         status = SAS_PHY_DOWN;
2702
2703                 complete_to_host = isci_perform_aborted_io_completion;
2704
2705                 /* This was an aborted request. */
2706
2707                 spin_unlock(&request->state_lock);
2708                 break;
2709
2710         case terminating:
2711
2712                 /* This was an terminated request.  This happens when
2713                  * the I/O is being terminated because of an action on
2714                  * the device (reset, tear down, etc.), and the I/O needs
2715                  * to be completed up the stack.
2716                  */
2717                 request->complete_in_target = true;
2718                 response = SAS_TASK_UNDELIVERED;
2719
2720                 /* See if the device has been/is being stopped. Note
2721                  * that we ignore the quiesce state, since we are
2722                  * concerned about the actual device state.
2723                  */
2724                 if ((isci_device->status == isci_stopping) ||
2725                     (isci_device->status == isci_stopped))
2726                         status = SAS_DEVICE_UNKNOWN;
2727                 else
2728                         status = SAS_ABORTED_TASK;
2729
2730                 complete_to_host = isci_perform_aborted_io_completion;
2731
2732                 /* This was a terminated request. */
2733
2734                 spin_unlock(&request->state_lock);
2735                 break;
2736
2737         default:
2738
2739                 /* The request is done from an SCU HW perspective. */
2740                 request->status = completed;
2741
2742                 spin_unlock(&request->state_lock);
2743
2744                 /* This is an active request being completed from the core. */
2745                 switch (completion_status) {
2746
2747                 case SCI_IO_FAILURE_RESPONSE_VALID:
2748                         dev_dbg(&isci_host->pdev->dev,
2749                                 "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n",
2750                                 __func__,
2751                                 request,
2752                                 task);
2753
2754                         if (sas_protocol_ata(task->task_proto)) {
2755                                 resp_buf = &request->sci.stp.rsp;
2756                                 isci_request_process_stp_response(task,
2757                                                                   resp_buf);
2758                         } else if (SAS_PROTOCOL_SSP == task->task_proto) {
2759
2760                                 /* crack the iu response buffer. */
2761                                 resp_iu = &request->sci.ssp.rsp;
2762                                 isci_request_process_response_iu(task, resp_iu,
2763                                                                  &isci_host->pdev->dev);
2764
2765                         } else if (SAS_PROTOCOL_SMP == task->task_proto) {
2766
2767                                 dev_err(&isci_host->pdev->dev,
2768                                         "%s: SCI_IO_FAILURE_RESPONSE_VALID: "
2769                                         "SAS_PROTOCOL_SMP protocol\n",
2770                                         __func__);
2771
2772                         } else
2773                                 dev_err(&isci_host->pdev->dev,
2774                                         "%s: unknown protocol\n", __func__);
2775
2776                         /* use the task status set in the task struct by the
2777                          * isci_request_process_response_iu call.
2778                          */
2779                         request->complete_in_target = true;
2780                         response = task->task_status.resp;
2781                         status = task->task_status.stat;
2782                         break;
2783
2784                 case SCI_IO_SUCCESS:
2785                 case SCI_IO_SUCCESS_IO_DONE_EARLY:
2786
2787                         response = SAS_TASK_COMPLETE;
2788                         status   = SAM_STAT_GOOD;
2789                         request->complete_in_target = true;
2790
2791                         if (task->task_proto == SAS_PROTOCOL_SMP) {
2792                                 void *rsp = &request->sci.smp.rsp;
2793
2794                                 dev_dbg(&isci_host->pdev->dev,
2795                                         "%s: SMP protocol completion\n",
2796                                         __func__);
2797
2798                                 sg_copy_from_buffer(
2799                                         &task->smp_task.smp_resp, 1,
2800                                         rsp, sizeof(struct smp_resp));
2801                         } else if (completion_status
2802                                    == SCI_IO_SUCCESS_IO_DONE_EARLY) {
2803
2804                                 /* This was an SSP / STP / SATA transfer.
2805                                  * There is a possibility that less data than
2806                                  * the maximum was transferred.
2807                                  */
2808                                 u32 transferred_length = sci_req_tx_bytes(&request->sci);
2809
2810                                 task->task_status.residual
2811                                         = task->total_xfer_len - transferred_length;
2812
2813                                 /* If there were residual bytes, call this an
2814                                  * underrun.
2815                                  */
2816                                 if (task->task_status.residual != 0)
2817                                         status = SAS_DATA_UNDERRUN;
2818
2819                                 dev_dbg(&isci_host->pdev->dev,
2820                                         "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n",
2821                                         __func__,
2822                                         status);
2823
2824                         } else
2825                                 dev_dbg(&isci_host->pdev->dev,
2826                                         "%s: SCI_IO_SUCCESS\n",
2827                                         __func__);
2828
2829                         break;
2830
2831                 case SCI_IO_FAILURE_TERMINATED:
2832                         dev_dbg(&isci_host->pdev->dev,
2833                                 "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n",
2834                                 __func__,
2835                                 request,
2836                                 task);
2837
2838                         /* The request was terminated explicitly.  No handling
2839                          * is needed in the SCSI error handler path.
2840                          */
2841                         request->complete_in_target = true;
2842                         response = SAS_TASK_UNDELIVERED;
2843
2844                         /* See if the device has been/is being stopped. Note
2845                          * that we ignore the quiesce state, since we are
2846                          * concerned about the actual device state.
2847                          */
2848                         if ((isci_device->status == isci_stopping) ||
2849                             (isci_device->status == isci_stopped))
2850                                 status = SAS_DEVICE_UNKNOWN;
2851                         else
2852                                 status = SAS_ABORTED_TASK;
2853
2854                         complete_to_host = isci_perform_normal_io_completion;
2855                         break;
2856
2857                 case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR:
2858
2859                         isci_request_handle_controller_specific_errors(
2860                                 isci_device, request, task, &response, &status,
2861                                 &complete_to_host);
2862
2863                         break;
2864
2865                 case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED:
2866                         /* This is a special case, in that the I/O completion
2867                          * is telling us that the device needs a reset.
2868                          * In order for the device reset condition to be
2869                          * noticed, the I/O has to be handled in the error
2870                          * handler.  Set the reset flag and cause the
2871                          * SCSI error thread to be scheduled.
2872                          */
2873                         spin_lock_irqsave(&task->task_state_lock, task_flags);
2874                         task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
2875                         spin_unlock_irqrestore(&task->task_state_lock, task_flags);
2876
2877                         /* Fail the I/O. */
2878                         response = SAS_TASK_UNDELIVERED;
2879                         status = SAM_STAT_TASK_ABORTED;
2880
2881                         complete_to_host = isci_perform_error_io_completion;
2882                         request->complete_in_target = false;
2883                         break;
2884
2885                 default:
2886                         /* Catch any otherwise unhandled error codes here. */
2887                         dev_warn(&isci_host->pdev->dev,
2888                                  "%s: invalid completion code: 0x%x - "
2889                                  "isci_request = %p\n",
2890                                  __func__, completion_status, request);
2891
2892                         response = SAS_TASK_UNDELIVERED;
2893
2894                         /* See if the device has been/is being stopped. Note
2895                          * that we ignore the quiesce state, since we are
2896                          * concerned about the actual device state.
2897                          */
2898                         if ((isci_device->status == isci_stopping) ||
2899                             (isci_device->status == isci_stopped))
2900                                 status = SAS_DEVICE_UNKNOWN;
2901                         else
2902                                 status = SAS_ABORTED_TASK;
2903
2904                         complete_to_host = isci_perform_error_io_completion;
2905                         request->complete_in_target = false;
2906                         break;
2907                 }
2908                 break;
2909         }
2910
2911         isci_request_unmap_sgl(request, isci_host->pdev);
2912
2913         /* Put the completed request on the correct list */
2914         isci_task_save_for_upper_layer_completion(isci_host, request, response,
2915                                                   status, complete_to_host
2916                                                   );
2917
2918         /* complete the io request to the core. */
2919         scic_controller_complete_io(&isci_host->sci,
2920                                     &isci_device->sci,
2921                                     &request->sci);
2922         /* set terminated handle so it cannot be completed or
2923          * terminated again, and to cause any calls into abort
2924          * task to recognize the already completed case.
2925          */
2926         request->terminated = true;
2927
2928         isci_host_can_dequeue(isci_host, 1);
2929 }
2930
2931 static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm)
2932 {
2933         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
2934         struct isci_request *ireq = sci_req_to_ireq(sci_req);
2935         struct domain_device *dev = sci_dev_to_domain(sci_req->target_device);
2936         struct sas_task *task;
2937
2938         /* XXX as hch said always creating an internal sas_task for tmf
2939          * requests would simplify the driver
2940          */
2941         task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL;
2942
2943         /* all unaccelerated request types (non ssp or ncq) handled with
2944          * substates
2945          */
2946         if (!task && dev->dev_type == SAS_END_DEV) {
2947                 sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP);
2948         } else if (!task &&
2949                    (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high ||
2950                     isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) {
2951                 sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED);
2952         } else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
2953                 sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP);
2954         } else if (task && sas_protocol_ata(task->task_proto) &&
2955                    !task->ata_task.use_ncq) {
2956                 u32 state;
2957
2958                 if (task->data_dir == DMA_NONE)
2959                         state = SCI_REQ_STP_NON_DATA_WAIT_H2D;
2960                 else if (task->ata_task.dma_xfer)
2961                         state = SCI_REQ_STP_UDMA_WAIT_TC_COMP;
2962                 else /* PIO */
2963                         state = SCI_REQ_STP_PIO_WAIT_H2D;
2964
2965                 sci_change_state(sm, state);
2966         }
2967 }
2968
2969 static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm)
2970 {
2971         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
2972         struct scic_sds_controller *scic = sci_req->owning_controller;
2973         struct isci_host *ihost = scic_to_ihost(scic);
2974         struct isci_request *ireq = sci_req_to_ireq(sci_req);
2975
2976         /* Tell the SCI_USER that the IO request is complete */
2977         if (sci_req->is_task_management_request == false)
2978                 isci_request_io_request_complete(ihost, ireq,
2979                                                  sci_req->sci_status);
2980         else
2981                 isci_task_request_complete(ihost, ireq, sci_req->sci_status);
2982 }
2983
2984 static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine *sm)
2985 {
2986         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
2987
2988         /* Setting the abort bit in the Task Context is required by the silicon. */
2989         sci_req->task_context_buffer->abort = 1;
2990 }
2991
2992 static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm)
2993 {
2994         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
2995
2996         scic_sds_remote_device_set_working_request(sci_req->target_device,
2997                                                    sci_req);
2998 }
2999
3000 static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm)
3001 {
3002         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
3003
3004         scic_sds_remote_device_set_working_request(sci_req->target_device,
3005                                                    sci_req);
3006 }
3007
3008 static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm)
3009 {
3010         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
3011
3012         scic_sds_remote_device_set_working_request(sci_req->target_device,
3013                                                    sci_req);
3014 }
3015
3016 static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm)
3017 {
3018         struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm);
3019         struct scu_task_context *task_context;
3020         struct host_to_dev_fis *h2d_fis;
3021         enum sci_status status;
3022
3023         /* Clear the SRST bit */
3024         h2d_fis = &sci_req->stp.cmd;
3025         h2d_fis->control = 0;
3026
3027         /* Clear the TC control bit */
3028         task_context = scic_sds_controller_get_task_context_buffer(
3029                 sci_req->owning_controller, sci_req->io_tag);
3030         task_context->control_frame = 0;
3031
3032         status = scic_controller_continue_io(sci_req);
3033         WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n");
3034 }
3035
3036 static const struct sci_base_state scic_sds_request_state_table[] = {
3037         [SCI_REQ_INIT] = { },
3038         [SCI_REQ_CONSTRUCTED] = { },
3039         [SCI_REQ_STARTED] = {
3040                 .enter_state = scic_sds_request_started_state_enter,
3041         },
3042         [SCI_REQ_STP_NON_DATA_WAIT_H2D] = {
3043                 .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter,
3044         },
3045         [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { },
3046         [SCI_REQ_STP_PIO_WAIT_H2D] = {
3047                 .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter,
3048         },
3049         [SCI_REQ_STP_PIO_WAIT_FRAME] = { },
3050         [SCI_REQ_STP_PIO_DATA_IN] = { },
3051         [SCI_REQ_STP_PIO_DATA_OUT] = { },
3052         [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { },
3053         [SCI_REQ_STP_UDMA_WAIT_D2H] = { },
3054         [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = {
3055                 .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter,
3056         },
3057         [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = {
3058                 .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter,
3059         },
3060         [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { },
3061         [SCI_REQ_TASK_WAIT_TC_COMP] = { },
3062         [SCI_REQ_TASK_WAIT_TC_RESP] = { },
3063         [SCI_REQ_SMP_WAIT_RESP] = { },
3064         [SCI_REQ_SMP_WAIT_TC_COMP] = { },
3065         [SCI_REQ_COMPLETED] = {
3066                 .enter_state = scic_sds_request_completed_state_enter,
3067         },
3068         [SCI_REQ_ABORTING] = {
3069                 .enter_state = scic_sds_request_aborting_state_enter,
3070         },
3071         [SCI_REQ_FINAL] = { },
3072 };
3073
3074 static void
3075 scic_sds_general_request_construct(struct scic_sds_controller *scic,
3076                                    struct scic_sds_remote_device *sci_dev,
3077                                    u16 io_tag,
3078                                    struct scic_sds_request *sci_req)
3079 {
3080         sci_init_sm(&sci_req->sm, scic_sds_request_state_table, SCI_REQ_INIT);
3081
3082         sci_req->io_tag = io_tag;
3083         sci_req->owning_controller = scic;
3084         sci_req->target_device = sci_dev;
3085         sci_req->protocol = SCIC_NO_PROTOCOL;
3086         sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX;
3087         sci_req->device_sequence = scic_sds_remote_device_get_sequence(sci_dev);
3088
3089         sci_req->sci_status   = SCI_SUCCESS;
3090         sci_req->scu_status   = 0;
3091         sci_req->post_context = 0xFFFFFFFF;
3092
3093         sci_req->is_task_management_request = false;
3094
3095         if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) {
3096                 sci_req->was_tag_assigned_by_user = false;
3097                 sci_req->task_context_buffer = &sci_req->tc;
3098         } else {
3099                 sci_req->was_tag_assigned_by_user = true;
3100
3101                 sci_req->task_context_buffer =
3102                         scic_sds_controller_get_task_context_buffer(scic, io_tag);
3103         }
3104 }
3105
3106 static enum sci_status
3107 scic_io_request_construct(struct scic_sds_controller *scic,
3108                           struct scic_sds_remote_device *sci_dev,
3109                           u16 io_tag, struct scic_sds_request *sci_req)
3110 {
3111         struct domain_device *dev = sci_dev_to_domain(sci_dev);
3112         enum sci_status status = SCI_SUCCESS;
3113
3114         /* Build the common part of the request */
3115         scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req);
3116
3117         if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
3118                 return SCI_FAILURE_INVALID_REMOTE_DEVICE;
3119
3120         if (dev->dev_type == SAS_END_DEV)
3121                 /* pass */;
3122         else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))
3123                 memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd));
3124         else if (dev_is_expander(dev))
3125                 memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd));
3126         else
3127                 return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
3128
3129         memset(sci_req->task_context_buffer, 0,
3130                offsetof(struct scu_task_context, sgl_pair_ab));
3131
3132         return status;
3133 }
3134
3135 enum sci_status scic_task_request_construct(struct scic_sds_controller *scic,
3136                                             struct scic_sds_remote_device *sci_dev,
3137                                             u16 io_tag, struct scic_sds_request *sci_req)
3138 {
3139         struct domain_device *dev = sci_dev_to_domain(sci_dev);
3140         enum sci_status status = SCI_SUCCESS;
3141
3142         /* Build the common part of the request */
3143         scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req);
3144
3145         if (dev->dev_type == SAS_END_DEV ||
3146             dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
3147                 sci_req->is_task_management_request = true;
3148                 memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context));
3149         } else
3150                 status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
3151
3152         return status;
3153 }
3154
3155 static enum sci_status isci_request_ssp_request_construct(
3156         struct isci_request *request)
3157 {
3158         enum sci_status status;
3159
3160         dev_dbg(&request->isci_host->pdev->dev,
3161                 "%s: request = %p\n",
3162                 __func__,
3163                 request);
3164         status = scic_io_request_construct_basic_ssp(&request->sci);
3165         return status;
3166 }
3167
3168 static enum sci_status isci_request_stp_request_construct(
3169         struct isci_request *request)
3170 {
3171         struct sas_task *task = isci_request_access_task(request);
3172         enum sci_status status;
3173         struct host_to_dev_fis *register_fis;
3174
3175         dev_dbg(&request->isci_host->pdev->dev,
3176                 "%s: request = %p\n",
3177                 __func__,
3178                 request);
3179
3180         /* Get the host_to_dev_fis from the core and copy
3181          * the fis from the task into it.
3182          */
3183         register_fis = isci_sata_task_to_fis_copy(task);
3184
3185         status = scic_io_request_construct_basic_sata(&request->sci);
3186
3187         /* Set the ncq tag in the fis, from the queue
3188          * command in the task.
3189          */
3190         if (isci_sata_is_task_ncq(task)) {
3191
3192                 isci_sata_set_ncq_tag(
3193                         register_fis,
3194                         task
3195                         );
3196         }
3197
3198         return status;
3199 }
3200
3201 /*
3202  * This function will fill in the SCU Task Context for a SMP request. The
3203  *    following important settings are utilized: -# task_type ==
3204  *    SCU_TASK_TYPE_SMP.  This simply indicates that a normal request type
3205  *    (i.e. non-raw frame) is being utilized to perform task management. -#
3206  *    control_frame == 1.  This ensures that the proper endianess is set so
3207  *    that the bytes are transmitted in the right order for a smp request frame.
3208  * @sci_req: This parameter specifies the smp request object being
3209  *    constructed.
3210  *
3211  */
3212 static void
3213 scu_smp_request_construct_task_context(struct scic_sds_request *sci_req,
3214                                        ssize_t req_len)
3215 {
3216         dma_addr_t dma_addr;
3217         struct scic_sds_remote_device *sci_dev;
3218         struct scic_sds_port *sci_port;
3219         struct scu_task_context *task_context;
3220         ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32);
3221
3222         /* byte swap the smp request. */
3223         sci_swab32_cpy(&sci_req->smp.cmd, &sci_req->smp.cmd,
3224                        word_cnt);
3225
3226         task_context = scic_sds_request_get_task_context(sci_req);
3227
3228         sci_dev = scic_sds_request_get_device(sci_req);
3229         sci_port = scic_sds_request_get_port(sci_req);
3230
3231         /*
3232          * Fill in the TC with the its required data
3233          * 00h
3234          */
3235         task_context->priority = 0;
3236         task_context->initiator_request = 1;
3237         task_context->connection_rate = sci_dev->connection_rate;
3238         task_context->protocol_engine_index =
3239                 scic_sds_controller_get_protocol_engine_group(scic);
3240         task_context->logical_port_index = scic_sds_port_get_index(sci_port);
3241         task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP;
3242         task_context->abort = 0;
3243         task_context->valid = SCU_TASK_CONTEXT_VALID;
3244         task_context->context_type = SCU_TASK_CONTEXT_TYPE;
3245
3246         /* 04h */
3247         task_context->remote_node_index = sci_dev->rnc.remote_node_index;
3248         task_context->command_code = 0;
3249         task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST;
3250
3251         /* 08h */
3252         task_context->link_layer_control = 0;
3253         task_context->do_not_dma_ssp_good_response = 1;
3254         task_context->strict_ordering = 0;
3255         task_context->control_frame = 1;
3256         task_context->timeout_enable = 0;
3257         task_context->block_guard_enable = 0;
3258
3259         /* 0ch */
3260         task_context->address_modifier = 0;
3261
3262         /* 10h */
3263         task_context->ssp_command_iu_length = req_len;
3264
3265         /* 14h */
3266         task_context->transfer_length_bytes = 0;
3267
3268         /*
3269          * 18h ~ 30h, protocol specific
3270          * since commandIU has been build by framework at this point, we just
3271          * copy the frist DWord from command IU to this location. */
3272         memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32));
3273
3274         /*
3275          * 40h
3276          * "For SMP you could program it to zero. We would prefer that way
3277          * so that done code will be consistent." - Venki
3278          */
3279         task_context->task_phase = 0;
3280
3281         if (sci_req->was_tag_assigned_by_user) {
3282                 /*
3283                  * Build the task context now since we have already read
3284                  * the data
3285                  */
3286                 sci_req->post_context =
3287                         (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
3288                          (scic_sds_controller_get_protocol_engine_group(scic) <<
3289                           SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
3290                          (scic_sds_port_get_index(sci_port) <<
3291                           SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
3292                          scic_sds_io_tag_get_index(sci_req->io_tag));
3293         } else {
3294                 /*
3295                  * Build the task context now since we have already read
3296                  * the data.
3297                  * I/O tag index is not assigned because we have to wait
3298                  * until we get a TCi.
3299                  */
3300                 sci_req->post_context =
3301                         (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
3302                          (scic_sds_controller_get_protocol_engine_group(scic) <<
3303                           SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
3304                          (scic_sds_port_get_index(sci_port) <<
3305                           SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT));
3306         }
3307
3308         /*
3309          * Copy the physical address for the command buffer to the SCU Task
3310          * Context command buffer should not contain command header.
3311          */
3312         dma_addr = scic_io_request_get_dma_addr(sci_req,
3313                                                 ((char *) &sci_req->smp.cmd) +
3314                                                 sizeof(u32));
3315
3316         task_context->command_iu_upper = upper_32_bits(dma_addr);
3317         task_context->command_iu_lower = lower_32_bits(dma_addr);
3318
3319         /* SMP response comes as UF, so no need to set response IU address. */
3320         task_context->response_iu_upper = 0;
3321         task_context->response_iu_lower = 0;
3322 }
3323
3324 static enum sci_status
3325 scic_io_request_construct_smp(struct scic_sds_request *sci_req)
3326 {
3327         struct smp_req *smp_req = &sci_req->smp.cmd;
3328
3329         sci_req->protocol = SCIC_SMP_PROTOCOL;
3330
3331         /*
3332          * Look at the SMP requests' header fields; for certain SAS 1.x SMP
3333          * functions under SAS 2.0, a zero request length really indicates
3334          * a non-zero default length.
3335          */
3336         if (smp_req->req_len == 0) {
3337                 switch (smp_req->func) {
3338                 case SMP_DISCOVER:
3339                 case SMP_REPORT_PHY_ERR_LOG:
3340                 case SMP_REPORT_PHY_SATA:
3341                 case SMP_REPORT_ROUTE_INFO:
3342                         smp_req->req_len = 2;
3343                         break;
3344                 case SMP_CONF_ROUTE_INFO:
3345                 case SMP_PHY_CONTROL:
3346                 case SMP_PHY_TEST_FUNCTION:
3347                         smp_req->req_len = 9;
3348                         break;
3349                         /* Default - zero is a valid default for 2.0. */
3350                 }
3351         }
3352
3353         scu_smp_request_construct_task_context(sci_req, smp_req->req_len);
3354
3355         sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED);
3356
3357         return SCI_SUCCESS;
3358 }
3359
3360 /*
3361  * isci_smp_request_build() - This function builds the smp request.
3362  * @ireq: This parameter points to the isci_request allocated in the
3363  *    request construct function.
3364  *
3365  * SCI_SUCCESS on successfull completion, or specific failure code.
3366  */
3367 static enum sci_status isci_smp_request_build(struct isci_request *ireq)
3368 {
3369         enum sci_status status = SCI_FAILURE;
3370         struct sas_task *task = isci_request_access_task(ireq);
3371         struct scic_sds_request *sci_req = &ireq->sci;
3372
3373         dev_dbg(&ireq->isci_host->pdev->dev,
3374                 "%s: request = %p\n", __func__, ireq);
3375
3376         dev_dbg(&ireq->isci_host->pdev->dev,
3377                 "%s: smp_req len = %d\n",
3378                 __func__,
3379                 task->smp_task.smp_req.length);
3380
3381         /* copy the smp_command to the address; */
3382         sg_copy_to_buffer(&task->smp_task.smp_req, 1,
3383                           &sci_req->smp.cmd,
3384                           sizeof(struct smp_req));
3385
3386         status = scic_io_request_construct_smp(sci_req);
3387         if (status != SCI_SUCCESS)
3388                 dev_warn(&ireq->isci_host->pdev->dev,
3389                          "%s: failed with status = %d\n",
3390                          __func__,
3391                          status);
3392
3393         return status;
3394 }
3395
3396 /**
3397  * isci_io_request_build() - This function builds the io request object.
3398  * @isci_host: This parameter specifies the ISCI host object
3399  * @request: This parameter points to the isci_request object allocated in the
3400  *    request construct function.
3401  * @sci_device: This parameter is the handle for the sci core's remote device
3402  *    object that is the destination for this request.
3403  *
3404  * SCI_SUCCESS on successfull completion, or specific failure code.
3405  */
3406 static enum sci_status isci_io_request_build(
3407         struct isci_host *isci_host,
3408         struct isci_request *request,
3409         struct isci_remote_device *isci_device)
3410 {
3411         enum sci_status status = SCI_SUCCESS;
3412         struct sas_task *task = isci_request_access_task(request);
3413         struct scic_sds_remote_device *sci_device = &isci_device->sci;
3414
3415         dev_dbg(&isci_host->pdev->dev,
3416                 "%s: isci_device = 0x%p; request = %p, "
3417                 "num_scatter = %d\n",
3418                 __func__,
3419                 isci_device,
3420                 request,
3421                 task->num_scatter);
3422
3423         /* map the sgl addresses, if present.
3424          * libata does the mapping for sata devices
3425          * before we get the request.
3426          */
3427         if (task->num_scatter &&
3428             !sas_protocol_ata(task->task_proto) &&
3429             !(SAS_PROTOCOL_SMP & task->task_proto)) {
3430
3431                 request->num_sg_entries = dma_map_sg(
3432                         &isci_host->pdev->dev,
3433                         task->scatter,
3434                         task->num_scatter,
3435                         task->data_dir
3436                         );
3437
3438                 if (request->num_sg_entries == 0)
3439                         return SCI_FAILURE_INSUFFICIENT_RESOURCES;
3440         }
3441
3442         /* build the common request object. For now,
3443          * we will let the core allocate the IO tag.
3444          */
3445         status = scic_io_request_construct(&isci_host->sci, sci_device,
3446                                            SCI_CONTROLLER_INVALID_IO_TAG,
3447                                            &request->sci);
3448
3449         if (status != SCI_SUCCESS) {
3450                 dev_warn(&isci_host->pdev->dev,
3451                          "%s: failed request construct\n",
3452                          __func__);
3453                 return SCI_FAILURE;
3454         }
3455
3456         switch (task->task_proto) {
3457         case SAS_PROTOCOL_SMP:
3458                 status = isci_smp_request_build(request);
3459                 break;
3460         case SAS_PROTOCOL_SSP:
3461                 status = isci_request_ssp_request_construct(request);
3462                 break;
3463         case SAS_PROTOCOL_SATA:
3464         case SAS_PROTOCOL_STP:
3465         case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
3466                 status = isci_request_stp_request_construct(request);
3467                 break;
3468         default:
3469                 dev_warn(&isci_host->pdev->dev,
3470                          "%s: unknown protocol\n", __func__);
3471                 return SCI_FAILURE;
3472         }
3473
3474         return SCI_SUCCESS;
3475 }
3476
3477 /**
3478  * isci_request_alloc_core() - This function gets the request object from the
3479  *    isci_host dma cache.
3480  * @isci_host: This parameter specifies the ISCI host object
3481  * @isci_request: This parameter will contain the pointer to the new
3482  *    isci_request object.
3483  * @isci_device: This parameter is the pointer to the isci remote device object
3484  *    that is the destination for this request.
3485  * @gfp_flags: This parameter specifies the os allocation flags.
3486  *
3487  * SCI_SUCCESS on successfull completion, or specific failure code.
3488  */
3489 static int isci_request_alloc_core(
3490         struct isci_host *isci_host,
3491         struct isci_request **isci_request,
3492         struct isci_remote_device *isci_device,
3493         gfp_t gfp_flags)
3494 {
3495         int ret = 0;
3496         dma_addr_t handle;
3497         struct isci_request *request;
3498
3499
3500         /* get pointer to dma memory. This actually points
3501          * to both the isci_remote_device object and the
3502          * sci object. The isci object is at the beginning
3503          * of the memory allocated here.
3504          */
3505         request = dma_pool_alloc(isci_host->dma_pool, gfp_flags, &handle);
3506         if (!request) {
3507                 dev_warn(&isci_host->pdev->dev,
3508                          "%s: dma_pool_alloc returned NULL\n", __func__);
3509                 return -ENOMEM;
3510         }
3511
3512         /* initialize the request object.       */
3513         spin_lock_init(&request->state_lock);
3514         request->request_daddr = handle;
3515         request->isci_host = isci_host;
3516         request->isci_device = isci_device;
3517         request->io_request_completion = NULL;
3518         request->terminated = false;
3519
3520         request->num_sg_entries = 0;
3521
3522         request->complete_in_target = false;
3523
3524         INIT_LIST_HEAD(&request->completed_node);
3525         INIT_LIST_HEAD(&request->dev_node);
3526
3527         *isci_request = request;
3528         isci_request_change_state(request, allocated);
3529
3530         return ret;
3531 }
3532
3533 static int isci_request_alloc_io(
3534         struct isci_host *isci_host,
3535         struct sas_task *task,
3536         struct isci_request **isci_request,
3537         struct isci_remote_device *isci_device,
3538         gfp_t gfp_flags)
3539 {
3540         int retval = isci_request_alloc_core(isci_host, isci_request,
3541                                              isci_device, gfp_flags);
3542
3543         if (!retval) {
3544                 (*isci_request)->ttype_ptr.io_task_ptr = task;
3545                 (*isci_request)->ttype                 = io_task;
3546
3547                 task->lldd_task = *isci_request;
3548         }
3549         return retval;
3550 }
3551
3552 /**
3553  * isci_request_alloc_tmf() - This function gets the request object from the
3554  *    isci_host dma cache and initializes the relevant fields as a sas_task.
3555  * @isci_host: This parameter specifies the ISCI host object
3556  * @sas_task: This parameter is the task struct from the upper layer driver.
3557  * @isci_request: This parameter will contain the pointer to the new
3558  *    isci_request object.
3559  * @isci_device: This parameter is the pointer to the isci remote device object
3560  *    that is the destination for this request.
3561  * @gfp_flags: This parameter specifies the os allocation flags.
3562  *
3563  * SCI_SUCCESS on successfull completion, or specific failure code.
3564  */
3565 int isci_request_alloc_tmf(
3566         struct isci_host *isci_host,
3567         struct isci_tmf *isci_tmf,
3568         struct isci_request **isci_request,
3569         struct isci_remote_device *isci_device,
3570         gfp_t gfp_flags)
3571 {
3572         int retval = isci_request_alloc_core(isci_host, isci_request,
3573                                              isci_device, gfp_flags);
3574
3575         if (!retval) {
3576
3577                 (*isci_request)->ttype_ptr.tmf_task_ptr = isci_tmf;
3578                 (*isci_request)->ttype = tmf_task;
3579         }
3580         return retval;
3581 }
3582
3583 /**
3584  * isci_request_execute() - This function allocates the isci_request object,
3585  *    all fills in some common fields.
3586  * @isci_host: This parameter specifies the ISCI host object
3587  * @sas_task: This parameter is the task struct from the upper layer driver.
3588  * @isci_request: This parameter will contain the pointer to the new
3589  *    isci_request object.
3590  * @gfp_flags: This parameter specifies the os allocation flags.
3591  *
3592  * SCI_SUCCESS on successfull completion, or specific failure code.
3593  */
3594 int isci_request_execute(
3595         struct isci_host *isci_host,
3596         struct sas_task *task,
3597         struct isci_request **isci_request,
3598         gfp_t gfp_flags)
3599 {
3600         int ret = 0;
3601         struct scic_sds_remote_device *sci_device;
3602         enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
3603         struct isci_remote_device *isci_device;
3604         struct isci_request *request;
3605         unsigned long flags;
3606
3607         isci_device = task->dev->lldd_dev;
3608         sci_device = &isci_device->sci;
3609
3610         /* do common allocation and init of request object. */
3611         ret = isci_request_alloc_io(
3612                 isci_host,
3613                 task,
3614                 &request,
3615                 isci_device,
3616                 gfp_flags
3617                 );
3618
3619         if (ret)
3620                 goto out;
3621
3622         status = isci_io_request_build(isci_host, request, isci_device);
3623         if (status != SCI_SUCCESS) {
3624                 dev_warn(&isci_host->pdev->dev,
3625                          "%s: request_construct failed - status = 0x%x\n",
3626                          __func__,
3627                          status);
3628                 goto out;
3629         }
3630
3631         spin_lock_irqsave(&isci_host->scic_lock, flags);
3632
3633         /* send the request, let the core assign the IO TAG.    */
3634         status = scic_controller_start_io(&isci_host->sci, sci_device,
3635                                           &request->sci,
3636                                           SCI_CONTROLLER_INVALID_IO_TAG);
3637         if (status != SCI_SUCCESS &&
3638             status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
3639                 dev_warn(&isci_host->pdev->dev,
3640                          "%s: failed request start (0x%x)\n",
3641                          __func__, status);
3642                 spin_unlock_irqrestore(&isci_host->scic_lock, flags);
3643                 goto out;
3644         }
3645
3646         /* Either I/O started OK, or the core has signaled that
3647          * the device needs a target reset.
3648          *
3649          * In either case, hold onto the I/O for later.
3650          *
3651          * Update it's status and add it to the list in the
3652          * remote device object.
3653          */
3654         isci_request_change_state(request, started);
3655         list_add(&request->dev_node, &isci_device->reqs_in_process);
3656
3657         if (status == SCI_SUCCESS) {
3658                 /* Save the tag for possible task mgmt later. */
3659                 request->io_tag = request->sci.io_tag;
3660         } else {
3661                 /* The request did not really start in the
3662                  * hardware, so clear the request handle
3663                  * here so no terminations will be done.
3664                  */
3665                 request->terminated = true;
3666         }
3667         spin_unlock_irqrestore(&isci_host->scic_lock, flags);
3668
3669         if (status ==
3670             SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
3671                 /* Signal libsas that we need the SCSI error
3672                 * handler thread to work on this I/O and that
3673                 * we want a device reset.
3674                 */
3675                 spin_lock_irqsave(&task->task_state_lock, flags);
3676                 task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
3677                 spin_unlock_irqrestore(&task->task_state_lock, flags);
3678
3679                 /* Cause this task to be scheduled in the SCSI error
3680                 * handler thread.
3681                 */
3682                 isci_execpath_callback(isci_host, task,
3683                                        sas_task_abort);
3684
3685                 /* Change the status, since we are holding
3686                 * the I/O until it is managed by the SCSI
3687                 * error handler.
3688                 */
3689                 status = SCI_SUCCESS;
3690         }
3691
3692  out:
3693         if (status != SCI_SUCCESS) {
3694                 /* release dma memory on failure. */
3695                 isci_request_free(isci_host, request);
3696                 request = NULL;
3697                 ret = SCI_FAILURE;
3698         }
3699
3700         *isci_request = request;
3701         return ret;
3702 }