drivers/scsi/pm8001/pm8001_init.c

   1 /*
   2  * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
   3  *
   4  * Copyright (c) 2008-2009 USI Co., Ltd.
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions, and the following disclaimer,
  12  *    without modification.
  13  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  14  *    substantially similar to the "NO WARRANTY" disclaimer below
  15  *    ("Disclaimer") and any redistribution must be conditioned upon
  16  *    including a substantially similar Disclaimer requirement for further
  17  *    binary redistribution.
  18  * 3. Neither the names of the above-listed copyright holders nor the names
  19  *    of any contributors may be used to endorse or promote products derived
  20  *    from this software without specific prior written permission.
  21  *
  22  * Alternatively, this software may be distributed under the terms of the
  23  * GNU General Public License ("GPL") version 2 as published by the Free
  24  * Software Foundation.
  25  *
  26  * NO WARRANTY
  27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  30  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  31  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  35  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  36  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  37  * POSSIBILITY OF SUCH DAMAGES.
  38  *
  39  */
  40
  41 #include <linux/slab.h>
  42 #include "pm8001_sas.h"
  43 #include "pm8001_chips.h"
  44
  45 static struct scsi_transport_template *pm8001_stt;
  46
  47 /**
  48  * chip info structure to identify chip key functionality as
  49  * encryption available/not, no of ports, hw specific function ref
  50  */
  51 static const struct pm8001_chip_info pm8001_chips[] = {
  52         [chip_8001] = {0,  8, &pm8001_8001_dispatch,},
  53         [chip_8008] = {0,  8, &pm8001_80xx_dispatch,},
  54         [chip_8009] = {1,  8, &pm8001_80xx_dispatch,},
  55         [chip_8018] = {0,  16, &pm8001_80xx_dispatch,},
  56         [chip_8019] = {1,  16, &pm8001_80xx_dispatch,},
  57         [chip_8074] = {0,  8, &pm8001_80xx_dispatch,},
  58         [chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
  59         [chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
  60 };
  61 static int pm8001_id;
  62
  63 LIST_HEAD(hba_list);
  64
  65 struct workqueue_struct *pm8001_wq;
  66
  67 /**
  68  * The main structure which LLDD must register for scsi core.
  69  */
  70 static struct scsi_host_template pm8001_sht = {
  71         .module                 = THIS_MODULE,
  72         .name                   = DRV_NAME,
  73         .queuecommand           = sas_queuecommand,
  74         .target_alloc           = sas_target_alloc,
  75         .slave_configure        = sas_slave_configure,
  76         .scan_finished          = pm8001_scan_finished,
  77         .scan_start             = pm8001_scan_start,
  78         .change_queue_depth     = sas_change_queue_depth,
  79         .change_queue_type      = sas_change_queue_type,
  80         .bios_param             = sas_bios_param,
  81         .can_queue              = 1,
  82         .cmd_per_lun            = 1,
  83         .this_id                = -1,
  84         .sg_tablesize           = SG_ALL,
  85         .max_sectors            = SCSI_DEFAULT_MAX_SECTORS,
  86         .use_clustering         = ENABLE_CLUSTERING,
  87         .eh_device_reset_handler = sas_eh_device_reset_handler,
  88         .eh_bus_reset_handler   = sas_eh_bus_reset_handler,
  89         .target_destroy         = sas_target_destroy,
  90         .ioctl                  = sas_ioctl,
  91         .shost_attrs            = pm8001_host_attrs,
  92 };
  93
  94 /**
  95  * Sas layer call this function to execute specific task.
  96  */
  97 static struct sas_domain_function_template pm8001_transport_ops = {
  98         .lldd_dev_found         = pm8001_dev_found,
  99         .lldd_dev_gone          = pm8001_dev_gone,
 100
 101         .lldd_execute_task      = pm8001_queue_command,
 102         .lldd_control_phy       = pm8001_phy_control,
 103
 104         .lldd_abort_task        = pm8001_abort_task,
 105         .lldd_abort_task_set    = pm8001_abort_task_set,
 106         .lldd_clear_aca         = pm8001_clear_aca,
 107         .lldd_clear_task_set    = pm8001_clear_task_set,
 108         .lldd_I_T_nexus_reset   = pm8001_I_T_nexus_reset,
 109         .lldd_lu_reset          = pm8001_lu_reset,
 110         .lldd_query_task        = pm8001_query_task,
 111 };
 112
 113 /**
 114  *pm8001_phy_init - initiate our adapter phys
 115  *@pm8001_ha: our hba structure.
 116  *@phy_id: phy id.
 117  */
 118 static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
 119 {
 120         struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
 121         struct asd_sas_phy *sas_phy = &phy->sas_phy;
 122         phy->phy_state = 0;
 123         phy->pm8001_ha = pm8001_ha;
 124         sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
 125         sas_phy->class = SAS;
 126         sas_phy->iproto = SAS_PROTOCOL_ALL;
 127         sas_phy->tproto = 0;
 128         sas_phy->type = PHY_TYPE_PHYSICAL;
 129         sas_phy->role = PHY_ROLE_INITIATOR;
 130         sas_phy->oob_mode = OOB_NOT_CONNECTED;
 131         sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
 132         sas_phy->id = phy_id;
 133         sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
 134         sas_phy->frame_rcvd = &phy->frame_rcvd[0];
 135         sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
 136         sas_phy->lldd_phy = phy;
 137 }
 138
 139 /**
 140  *pm8001_free - free hba
 141  *@pm8001_ha:   our hba structure.
 142  *
 143  */
 144 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 145 {
 146         int i;
 147
 148         if (!pm8001_ha)
 149                 return;
 150
 151         for (i = 0; i < USI_MAX_MEMCNT; i++) {
 152                 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
 153                         pci_free_consistent(pm8001_ha->pdev,
 154                                 (pm8001_ha->memoryMap.region[i].total_len +
 155                                 pm8001_ha->memoryMap.region[i].alignment),
 156                                 pm8001_ha->memoryMap.region[i].virt_ptr,
 157                                 pm8001_ha->memoryMap.region[i].phys_addr);
 158                         }
 159         }
 160         PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
 161         if (pm8001_ha->shost)
 162                 scsi_host_put(pm8001_ha->shost);
 163         flush_workqueue(pm8001_wq);
 164         kfree(pm8001_ha->tags);
 165         kfree(pm8001_ha);
 166 }
 167
 168 #ifdef PM8001_USE_TASKLET
 169
 170 /**
 171  * tasklet for 64 msi-x interrupt handler
 172  * @opaque: the passed general host adapter struct
 173  * Note: pm8001_tasklet is common for pm8001 & pm80xx
 174  */
 175 static void pm8001_tasklet(unsigned long opaque)
 176 {
 177         struct pm8001_hba_info *pm8001_ha;
 178         struct isr_param *irq_vector;
 179
 180         irq_vector = (struct isr_param *)opaque;
 181         pm8001_ha = irq_vector->drv_inst;
 182         if (unlikely(!pm8001_ha))
 183                 BUG_ON(1);
 184         PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 185 }
 186 #endif
 187
 188 /**
 189  * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
 190  * It obtains the vector number and calls the equivalent bottom
 191  * half or services directly.
 192  * @opaque: the passed outbound queue/vector. Host structure is
 193  * retrieved from the same.
 194  */
 195 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
 196 {
 197         struct isr_param *irq_vector;
 198         struct pm8001_hba_info *pm8001_ha;
 199         irqreturn_t ret = IRQ_HANDLED;
 200         irq_vector = (struct isr_param *)opaque;
 201         pm8001_ha = irq_vector->drv_inst;
 202
 203         if (unlikely(!pm8001_ha))
 204                 return IRQ_NONE;
 205         if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
 206                 return IRQ_NONE;
 207 #ifdef PM8001_USE_TASKLET
 208         tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
 209 #else
 210         ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 211 #endif
 212         return ret;
 213 }
 214
 215 /**
 216  * pm8001_interrupt_handler_intx - main INTx interrupt handler.
 217  * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
 218  */
 219
 220 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 221 {
 222         struct pm8001_hba_info *pm8001_ha;
 223         irqreturn_t ret = IRQ_HANDLED;
 224         struct sas_ha_struct *sha = dev_id;
 225         pm8001_ha = sha->lldd_ha;
 226         if (unlikely(!pm8001_ha))
 227                 return IRQ_NONE;
 228         if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
 229                 return IRQ_NONE;
 230
 231 #ifdef PM8001_USE_TASKLET
 232         tasklet_schedule(&pm8001_ha->tasklet[0]);
 233 #else
 234         ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
 235 #endif
 236         return ret;
 237 }
 238
 239 /**
 240  * pm8001_alloc - initiate our hba structure and 6 DMAs area.
 241  * @pm8001_ha:our hba structure.
 242  *
 243  */
 244 static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 245                         const struct pci_device_id *ent)
 246 {
 247         int i;
 248         spin_lock_init(&pm8001_ha->lock);
 249         PM8001_INIT_DBG(pm8001_ha,
 250                 pm8001_printk("pm8001_alloc: PHY:%x\n",
 251                                 pm8001_ha->chip->n_phy));
 252         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 253                 pm8001_phy_init(pm8001_ha, i);
 254                 pm8001_ha->port[i].wide_port_phymap = 0;
 255                 pm8001_ha->port[i].port_attached = 0;
 256                 pm8001_ha->port[i].port_state = 0;
 257                 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
 258         }
 259
 260         pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
 261         if (!pm8001_ha->tags)
 262                 goto err_out;
 263         /* MPI Memory region 1 for AAP Event Log for fw */
 264         pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
 265         pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
 266         pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
 267         pm8001_ha->memoryMap.region[AAP1].alignment = 32;
 268
 269         /* MPI Memory region 2 for IOP Event Log for fw */
 270         pm8001_ha->memoryMap.region[IOP].num_elements = 1;
 271         pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
 272         pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
 273         pm8001_ha->memoryMap.region[IOP].alignment = 32;
 274
 275         for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
 276                 /* MPI Memory region 3 for consumer Index of inbound queues */
 277                 pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
 278                 pm8001_ha->memoryMap.region[CI+i].element_size = 4;
 279                 pm8001_ha->memoryMap.region[CI+i].total_len = 4;
 280                 pm8001_ha->memoryMap.region[CI+i].alignment = 4;
 281
 282                 if ((ent->driver_data) != chip_8001) {
 283                         /* MPI Memory region 5 inbound queues */
 284                         pm8001_ha->memoryMap.region[IB+i].num_elements =
 285                                                 PM8001_MPI_QUEUE;
 286                         pm8001_ha->memoryMap.region[IB+i].element_size = 128;
 287                         pm8001_ha->memoryMap.region[IB+i].total_len =
 288                                                 PM8001_MPI_QUEUE * 128;
 289                         pm8001_ha->memoryMap.region[IB+i].alignment = 128;
 290                 } else {
 291                         pm8001_ha->memoryMap.region[IB+i].num_elements =
 292                                                 PM8001_MPI_QUEUE;
 293                         pm8001_ha->memoryMap.region[IB+i].element_size = 64;
 294                         pm8001_ha->memoryMap.region[IB+i].total_len =
 295                                                 PM8001_MPI_QUEUE * 64;
 296                         pm8001_ha->memoryMap.region[IB+i].alignment = 64;
 297                 }
 298         }
 299
 300         for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
 301                 /* MPI Memory region 4 for producer Index of outbound queues */
 302                 pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
 303                 pm8001_ha->memoryMap.region[PI+i].element_size = 4;
 304                 pm8001_ha->memoryMap.region[PI+i].total_len = 4;
 305                 pm8001_ha->memoryMap.region[PI+i].alignment = 4;
 306
 307                 if (ent->driver_data != chip_8001) {
 308                         /* MPI Memory region 6 Outbound queues */
 309                         pm8001_ha->memoryMap.region[OB+i].num_elements =
 310                                                 PM8001_MPI_QUEUE;
 311                         pm8001_ha->memoryMap.region[OB+i].element_size = 128;
 312                         pm8001_ha->memoryMap.region[OB+i].total_len =
 313                                                 PM8001_MPI_QUEUE * 128;
 314                         pm8001_ha->memoryMap.region[OB+i].alignment = 128;
 315                 } else {
 316                         /* MPI Memory region 6 Outbound queues */
 317                         pm8001_ha->memoryMap.region[OB+i].num_elements =
 318                                                 PM8001_MPI_QUEUE;
 319                         pm8001_ha->memoryMap.region[OB+i].element_size = 64;
 320                         pm8001_ha->memoryMap.region[OB+i].total_len =
 321                                                 PM8001_MPI_QUEUE * 64;
 322                         pm8001_ha->memoryMap.region[OB+i].alignment = 64;
 323                 }
 324
 325         }
 326         /* Memory region write DMA*/
 327         pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
 328         pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
 329         pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
 330         /* Memory region for devices*/
 331         pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
 332         pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
 333                 sizeof(struct pm8001_device);
 334         pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
 335                 sizeof(struct pm8001_device);
 336
 337         /* Memory region for ccb_info*/
 338         pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
 339         pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
 340                 sizeof(struct pm8001_ccb_info);
 341         pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
 342                 sizeof(struct pm8001_ccb_info);
 343
 344         /* Memory region for fw flash */
 345         pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
 346
 347         pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
 348         pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
 349         pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
 350         pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
 351         for (i = 0; i < USI_MAX_MEMCNT; i++) {
 352                 if (pm8001_mem_alloc(pm8001_ha->pdev,
 353                         &pm8001_ha->memoryMap.region[i].virt_ptr,
 354                         &pm8001_ha->memoryMap.region[i].phys_addr,
 355                         &pm8001_ha->memoryMap.region[i].phys_addr_hi,
 356                         &pm8001_ha->memoryMap.region[i].phys_addr_lo,
 357                         pm8001_ha->memoryMap.region[i].total_len,
 358                         pm8001_ha->memoryMap.region[i].alignment) != 0) {
 359                                 PM8001_FAIL_DBG(pm8001_ha,
 360                                         pm8001_printk("Mem%d alloc failed\n",
 361                                         i));
 362                                 goto err_out;
 363                 }
 364         }
 365
 366         pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
 367         for (i = 0; i < PM8001_MAX_DEVICES; i++) {
 368                 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
 369                 pm8001_ha->devices[i].id = i;
 370                 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
 371                 pm8001_ha->devices[i].running_req = 0;
 372         }
 373         pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
 374         for (i = 0; i < PM8001_MAX_CCB; i++) {
 375                 pm8001_ha->ccb_info[i].ccb_dma_handle =
 376                         pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
 377                         i * sizeof(struct pm8001_ccb_info);
 378                 pm8001_ha->ccb_info[i].task = NULL;
 379                 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
 380                 pm8001_ha->ccb_info[i].device = NULL;
 381                 ++pm8001_ha->tags_num;
 382         }
 383         pm8001_ha->flags = PM8001F_INIT_TIME;
 384         /* Initialize tags */
 385         pm8001_tag_init(pm8001_ha);
 386         return 0;
 387 err_out:
 388         return 1;
 389 }
 390
 391 /**
 392  * pm8001_ioremap - remap the pci high physical address to kernal virtual
 393  * address so that we can access them.
 394  * @pm8001_ha:our hba structure.
 395  */
 396 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
 397 {
 398         u32 bar;
 399         u32 logicalBar = 0;
 400         struct pci_dev *pdev;
 401
 402         pdev = pm8001_ha->pdev;
 403         /* map pci mem (PMC pci base 0-3)*/
 404         for (bar = 0; bar < 6; bar++) {
 405                 /*
 406                 ** logical BARs for SPC:
 407                 ** bar 0 and 1 - logical BAR0
 408                 ** bar 2 and 3 - logical BAR1
 409                 ** bar4 - logical BAR2
 410                 ** bar5 - logical BAR3
 411                 ** Skip the appropriate assignments:
 412                 */
 413                 if ((bar == 1) || (bar == 3))
 414                         continue;
 415                 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
 416                         pm8001_ha->io_mem[logicalBar].membase =
 417                                 pci_resource_start(pdev, bar);
 418                         pm8001_ha->io_mem[logicalBar].membase &=
 419                                 (u32)PCI_BASE_ADDRESS_MEM_MASK;
 420                         pm8001_ha->io_mem[logicalBar].memsize =
 421                                 pci_resource_len(pdev, bar);
 422                         pm8001_ha->io_mem[logicalBar].memvirtaddr =
 423                                 ioremap(pm8001_ha->io_mem[logicalBar].membase,
 424                                 pm8001_ha->io_mem[logicalBar].memsize);
 425                         PM8001_INIT_DBG(pm8001_ha,
 426                                 pm8001_printk("PCI: bar %d, logicalBar %d ",
 427                                 bar, logicalBar));
 428                         PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
 429                                 "base addr %llx virt_addr=%llx len=%d\n",
 430                                 (u64)pm8001_ha->io_mem[logicalBar].membase,
 431                                 (u64)(unsigned long)
 432                                 pm8001_ha->io_mem[logicalBar].memvirtaddr,
 433                                 pm8001_ha->io_mem[logicalBar].memsize));
 434                 } else {
 435                         pm8001_ha->io_mem[logicalBar].membase   = 0;
 436                         pm8001_ha->io_mem[logicalBar].memsize   = 0;
 437                         pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
 438                 }
 439                 logicalBar++;
 440         }
 441         return 0;
 442 }
 443
 444 /**
 445  * pm8001_pci_alloc - initialize our ha card structure
 446  * @pdev: pci device.
 447  * @ent: ent
 448  * @shost: scsi host struct which has been initialized before.
 449  */
 450 static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 451                                  const struct pci_device_id *ent,
 452                                 struct Scsi_Host *shost)
 453
 454 {
 455         struct pm8001_hba_info *pm8001_ha;
 456         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 457         int j;
 458
 459         pm8001_ha = sha->lldd_ha;
 460         if (!pm8001_ha)
 461                 return NULL;
 462
 463         pm8001_ha->pdev = pdev;
 464         pm8001_ha->dev = &pdev->dev;
 465         pm8001_ha->chip_id = ent->driver_data;
 466         pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
 467         pm8001_ha->irq = pdev->irq;
 468         pm8001_ha->sas = sha;
 469         pm8001_ha->shost = shost;
 470         pm8001_ha->id = pm8001_id++;
 471         pm8001_ha->logging_level = 0x01;
 472         sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
 473         /* IOMB size is 128 for 8088/89 controllers */
 474         if (pm8001_ha->chip_id != chip_8001)
 475                 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
 476         else
 477                 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
 478
 479 #ifdef PM8001_USE_TASKLET
 480         /* Tasklet for non msi-x interrupt handler */
 481         if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
 482                 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
 483                         (unsigned long)&(pm8001_ha->irq_vector[0]));
 484         else
 485                 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
 486                         tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
 487                                 (unsigned long)&(pm8001_ha->irq_vector[j]));
 488 #endif
 489         pm8001_ioremap(pm8001_ha);
 490         if (!pm8001_alloc(pm8001_ha, ent))
 491                 return pm8001_ha;
 492         pm8001_free(pm8001_ha);
 493         return NULL;
 494 }
 495
 496 /**
 497  * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
 498  * @pdev: pci device.
 499  */
 500 static int pci_go_44(struct pci_dev *pdev)
 501 {
 502         int rc;
 503
 504         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
 505                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
 506                 if (rc) {
 507                         rc = pci_set_consistent_dma_mask(pdev,
 508                                 DMA_BIT_MASK(32));
 509                         if (rc) {
 510                                 dev_printk(KERN_ERR, &pdev->dev,
 511                                         "44-bit DMA enable failed\n");
 512                                 return rc;
 513                         }
 514                 }
 515         } else {
 516                 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 517                 if (rc) {
 518                         dev_printk(KERN_ERR, &pdev->dev,
 519                                 "32-bit DMA enable failed\n");
 520                         return rc;
 521                 }
 522                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 523                 if (rc) {
 524                         dev_printk(KERN_ERR, &pdev->dev,
 525                                 "32-bit consistent DMA enable failed\n");
 526                         return rc;
 527                 }
 528         }
 529         return rc;
 530 }
 531
 532 /**
 533  * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
 534  * @shost: scsi host which has been allocated outside.
 535  * @chip_info: our ha struct.
 536  */
 537 static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
 538                                    const struct pm8001_chip_info *chip_info)
 539 {
 540         int phy_nr, port_nr;
 541         struct asd_sas_phy **arr_phy;
 542         struct asd_sas_port **arr_port;
 543         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 544
 545         phy_nr = chip_info->n_phy;
 546         port_nr = phy_nr;
 547         memset(sha, 0x00, sizeof(*sha));
 548         arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
 549         if (!arr_phy)
 550                 goto exit;
 551         arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
 552         if (!arr_port)
 553                 goto exit_free2;
 554
 555         sha->sas_phy = arr_phy;
 556         sha->sas_port = arr_port;
 557         sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
 558         if (!sha->lldd_ha)
 559                 goto exit_free1;
 560
 561         shost->transportt = pm8001_stt;
 562         shost->max_id = PM8001_MAX_DEVICES;
 563         shost->max_lun = 8;
 564         shost->max_channel = 0;
 565         shost->unique_id = pm8001_id;
 566         shost->max_cmd_len = 16;
 567         shost->can_queue = PM8001_CAN_QUEUE;
 568         shost->cmd_per_lun = 32;
 569         return 0;
 570 exit_free1:
 571         kfree(arr_port);
 572 exit_free2:
 573         kfree(arr_phy);
 574 exit:
 575         return -1;
 576 }
 577
 578 /**
 579  * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
 580  * @shost: scsi host which has been allocated outside
 581  * @chip_info: our ha struct.
 582  */
 583 static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
 584                                      const struct pm8001_chip_info *chip_info)
 585 {
 586         int i = 0;
 587         struct pm8001_hba_info *pm8001_ha;
 588         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 589
 590         pm8001_ha = sha->lldd_ha;
 591         for (i = 0; i < chip_info->n_phy; i++) {
 592                 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
 593                 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
 594         }
 595         sha->sas_ha_name = DRV_NAME;
 596         sha->dev = pm8001_ha->dev;
 597
 598         sha->lldd_module = THIS_MODULE;
 599         sha->sas_addr = &pm8001_ha->sas_addr[0];
 600         sha->num_phys = chip_info->n_phy;
 601         sha->lldd_max_execute_num = 1;
 602         sha->lldd_queue_size = PM8001_CAN_QUEUE;
 603         sha->core.shost = shost;
 604 }
 605
 606 /**
 607  * pm8001_init_sas_add - initialize sas address
 608  * @chip_info: our ha struct.
 609  *
 610  * Currently we just set the fixed SAS address to our HBA,for manufacture,
 611  * it should read from the EEPROM
 612  */
 613 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 614 {
 615         u8 i, j;
 616 #ifdef PM8001_READ_VPD
 617         /* For new SPC controllers WWN is stored in flash vpd
 618         *  For SPC/SPCve controllers WWN is stored in EEPROM
 619         *  For Older SPC WWN is stored in NVMD
 620         */
 621         DECLARE_COMPLETION_ONSTACK(completion);
 622         struct pm8001_ioctl_payload payload;
 623         u16 deviceid;
 624         pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
 625         pm8001_ha->nvmd_completion = &completion;
 626
 627         if (pm8001_ha->chip_id == chip_8001) {
 628                 if (deviceid == 0x8081 || deviceid == 0x0042) {
 629                         payload.minor_function = 4;
 630                         payload.length = 4096;
 631                 } else {
 632                         payload.minor_function = 0;
 633                         payload.length = 128;
 634                 }
 635         } else {
 636                 payload.minor_function = 1;
 637                 payload.length = 4096;
 638         }
 639         payload.offset = 0;
 640         payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
 641         PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 642         wait_for_completion(&completion);
 643
 644         for (i = 0, j = 0; i <= 7; i++, j++) {
 645                 if (pm8001_ha->chip_id == chip_8001) {
 646                         if (deviceid == 0x8081)
 647                                 pm8001_ha->sas_addr[j] =
 648                                         payload.func_specific[0x704 + i];
 649                         else if (deviceid == 0x0042)
 650                                 pm8001_ha->sas_addr[j] =
 651                                         payload.func_specific[0x010 + i];
 652                 } else
 653                         pm8001_ha->sas_addr[j] =
 654                                         payload.func_specific[0x804 + i];
 655         }
 656
 657         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 658                 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
 659                         pm8001_ha->sas_addr, SAS_ADDR_SIZE);
 660                 PM8001_INIT_DBG(pm8001_ha,
 661                         pm8001_printk("phy %d sas_addr = %016llx\n", i,
 662                         pm8001_ha->phy[i].dev_sas_addr));
 663         }
 664 #else
 665         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 666                 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
 667                 pm8001_ha->phy[i].dev_sas_addr =
 668                         cpu_to_be64((u64)
 669                                 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
 670         }
 671         memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
 672                 SAS_ADDR_SIZE);
 673 #endif
 674 }
 675
 676 /*
 677  * pm8001_get_phy_settings_info : Read phy setting values.
 678  * @pm8001_ha : our hba.
 679  */
 680 static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
 681 {
 682
 683 #ifdef PM8001_READ_VPD
 684         /*OPTION ROM FLASH read for the SPC cards */
 685         DECLARE_COMPLETION_ONSTACK(completion);
 686         struct pm8001_ioctl_payload payload;
 687
 688         pm8001_ha->nvmd_completion = &completion;
 689         /* SAS ADDRESS read from flash / EEPROM */
 690         payload.minor_function = 6;
 691         payload.offset = 0;
 692         payload.length = 4096;
 693         payload.func_specific = kzalloc(4096, GFP_KERNEL);
 694         if (!payload.func_specific)
 695                 return -ENOMEM;
 696         /* Read phy setting values from flash */
 697         PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 698         wait_for_completion(&completion);
 699         pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
 700         kfree(payload.func_specific);
 701 #endif
 702         return 0;
 703 }
 704
 705 #ifdef PM8001_USE_MSIX
 706 /**
 707  * pm8001_setup_msix - enable MSI-X interrupt
 708  * @chip_info: our ha struct.
 709  * @irq_handler: irq_handler
 710  */
 711 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 712 {
 713         u32 i = 0, j = 0;
 714         u32 number_of_intr;
 715         int flag = 0;
 716         u32 max_entry;
 717         int rc;
 718         static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
 719
 720         /* SPCv controllers supports 64 msi-x */
 721         if (pm8001_ha->chip_id == chip_8001) {
 722                 number_of_intr = 1;
 723         } else {
 724                 number_of_intr = PM8001_MAX_MSIX_VEC;
 725                 flag &= ~IRQF_SHARED;
 726         }
 727
 728         max_entry = sizeof(pm8001_ha->msix_entries) /
 729                 sizeof(pm8001_ha->msix_entries[0]);
 730         for (i = 0; i < max_entry ; i++)
 731                 pm8001_ha->msix_entries[i].entry = i;
 732         rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
 733                 number_of_intr);
 734         pm8001_ha->number_of_intr = number_of_intr;
 735         if (!rc) {
 736                 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
 737                         "pci_enable_msix request ret:%d no of intr %d\n",
 738                                         rc, pm8001_ha->number_of_intr));
 739
 740
 741                 for (i = 0; i < number_of_intr; i++) {
 742                         snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
 743                                         DRV_NAME"%d", i);
 744                         pm8001_ha->irq_vector[i].irq_id = i;
 745                         pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
 746
 747                         if (request_irq(pm8001_ha->msix_entries[i].vector,
 748                                 pm8001_interrupt_handler_msix, flag,
 749                                 intr_drvname[i], &(pm8001_ha->irq_vector[i]))) {
 750                                 for (j = 0; j < i; j++)
 751                                         free_irq(
 752                                         pm8001_ha->msix_entries[j].vector,
 753                                         &(pm8001_ha->irq_vector[i]));
 754                                 pci_disable_msix(pm8001_ha->pdev);
 755                                 break;
 756                         }
 757                 }
 758         }
 759         return rc;
 760 }
 761 #endif
 762
 763 /**
 764  * pm8001_request_irq - register interrupt
 765  * @chip_info: our ha struct.
 766  */
 767 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 768 {
 769         struct pci_dev *pdev;
 770         int rc;
 771
 772         pdev = pm8001_ha->pdev;
 773
 774 #ifdef PM8001_USE_MSIX
 775         if (pdev->msix_cap)
 776                 return pm8001_setup_msix(pm8001_ha);
 777         else {
 778                 PM8001_INIT_DBG(pm8001_ha,
 779                         pm8001_printk("MSIX not supported!!!\n"));
 780                 goto intx;
 781         }
 782 #endif
 783
 784 intx:
 785         /* initialize the INT-X interrupt */
 786         rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
 787                 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
 788         return rc;
 789 }
 790
 791 /**
 792  * pm8001_pci_probe - probe supported device
 793  * @pdev: pci device which kernel has been prepared for.
 794  * @ent: pci device id
 795  *
 796  * This function is the main initialization function, when register a new
 797  * pci driver it is invoked, all struct an hardware initilization should be done
 798  * here, also, register interrupt
 799  */
 800 static int pm8001_pci_probe(struct pci_dev *pdev,
 801                             const struct pci_device_id *ent)
 802 {
 803         unsigned int rc;
 804         u32     pci_reg;
 805         u8      i = 0;
 806         struct pm8001_hba_info *pm8001_ha;
 807         struct Scsi_Host *shost = NULL;
 808         const struct pm8001_chip_info *chip;
 809
 810         dev_printk(KERN_INFO, &pdev->dev,
 811                 "pm80xx: driver version %s\n", DRV_VERSION);
 812         rc = pci_enable_device(pdev);
 813         if (rc)
 814                 goto err_out_enable;
 815         pci_set_master(pdev);
 816         /*
 817          * Enable pci slot busmaster by setting pci command register.
 818          * This is required by FW for Cyclone card.
 819          */
 820
 821         pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
 822         pci_reg |= 0x157;
 823         pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
 824         rc = pci_request_regions(pdev, DRV_NAME);
 825         if (rc)
 826                 goto err_out_disable;
 827         rc = pci_go_44(pdev);
 828         if (rc)
 829                 goto err_out_regions;
 830
 831         shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
 832         if (!shost) {
 833                 rc = -ENOMEM;
 834                 goto err_out_regions;
 835         }
 836         chip = &pm8001_chips[ent->driver_data];
 837         SHOST_TO_SAS_HA(shost) =
 838                 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
 839         if (!SHOST_TO_SAS_HA(shost)) {
 840                 rc = -ENOMEM;
 841                 goto err_out_free_host;
 842         }
 843
 844         rc = pm8001_prep_sas_ha_init(shost, chip);
 845         if (rc) {
 846                 rc = -ENOMEM;
 847                 goto err_out_free;
 848         }
 849         pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
 850         /* ent->driver variable is used to differentiate between controllers */
 851         pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
 852         if (!pm8001_ha) {
 853                 rc = -ENOMEM;
 854                 goto err_out_free;
 855         }
 856         list_add_tail(&pm8001_ha->list, &hba_list);
 857         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 858         rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
 859         if (rc) {
 860                 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
 861                         "chip_init failed [ret: %d]\n", rc));
 862                 goto err_out_ha_free;
 863         }
 864
 865         rc = scsi_add_host(shost, &pdev->dev);
 866         if (rc)
 867                 goto err_out_ha_free;
 868         rc = pm8001_request_irq(pm8001_ha);
 869         if (rc) {
 870                 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
 871                         "pm8001_request_irq failed [ret: %d]\n", rc));
 872                 goto err_out_shost;
 873         }
 874
 875         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
 876         if (pm8001_ha->chip_id != chip_8001) {
 877                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
 878                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
 879                 /* setup thermal configuration. */
 880                 pm80xx_set_thermal_config(pm8001_ha);
 881         }
 882
 883         pm8001_init_sas_add(pm8001_ha);
 884         /* phy setting support for motherboard controller */
 885         if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
 886                 pdev->subsystem_vendor != 0) {
 887                 rc = pm8001_get_phy_settings_info(pm8001_ha);
 888                 if (rc)
 889                         goto err_out_shost;
 890         }
 891         pm8001_post_sas_ha_init(shost, chip);
 892         rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
 893         if (rc)
 894                 goto err_out_shost;
 895         scsi_scan_host(pm8001_ha->shost);
 896         return 0;
 897
 898 err_out_shost:
 899         scsi_remove_host(pm8001_ha->shost);
 900 err_out_ha_free:
 901         pm8001_free(pm8001_ha);
 902 err_out_free:
 903         kfree(SHOST_TO_SAS_HA(shost));
 904 err_out_free_host:
 905         kfree(shost);
 906 err_out_regions:
 907         pci_release_regions(pdev);
 908 err_out_disable:
 909         pci_disable_device(pdev);
 910 err_out_enable:
 911         return rc;
 912 }
 913
 914 static void pm8001_pci_remove(struct pci_dev *pdev)
 915 {
 916         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 917         struct pm8001_hba_info *pm8001_ha;
 918         int i, j;
 919         pm8001_ha = sha->lldd_ha;
 920         sas_unregister_ha(sha);
 921         sas_remove_host(pm8001_ha->shost);
 922         list_del(&pm8001_ha->list);
 923         scsi_remove_host(pm8001_ha->shost);
 924         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 925         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 926
 927 #ifdef PM8001_USE_MSIX
 928         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 929                 synchronize_irq(pm8001_ha->msix_entries[i].vector);
 930         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 931                 free_irq(pm8001_ha->msix_entries[i].vector,
 932                                 &(pm8001_ha->irq_vector[i]));
 933         pci_disable_msix(pdev);
 934 #else
 935         free_irq(pm8001_ha->irq, sha);
 936 #endif
 937 #ifdef PM8001_USE_TASKLET
 938         /* For non-msix and msix interrupts */
 939         if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
 940                 tasklet_kill(&pm8001_ha->tasklet[0]);
 941         else
 942                 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
 943                         tasklet_kill(&pm8001_ha->tasklet[j]);
 944 #endif
 945         pm8001_free(pm8001_ha);
 946         kfree(sha->sas_phy);
 947         kfree(sha->sas_port);
 948         kfree(sha);
 949         pci_release_regions(pdev);
 950         pci_disable_device(pdev);
 951 }
 952
 953 /**
 954  * pm8001_pci_suspend - power management suspend main entry point
 955  * @pdev: PCI device struct
 956  * @state: PM state change to (usually PCI_D3)
 957  *
 958  * Returns 0 success, anything else error.
 959  */
 960 static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 961 {
 962         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 963         struct pm8001_hba_info *pm8001_ha;
 964         int  i, j;
 965         u32 device_state;
 966         pm8001_ha = sha->lldd_ha;
 967         flush_workqueue(pm8001_wq);
 968         scsi_block_requests(pm8001_ha->shost);
 969         if (!pdev->pm_cap) {
 970                 dev_err(&pdev->dev, " PCI PM not supported\n");
 971                 return -ENODEV;
 972         }
 973         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 974         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 975 #ifdef PM8001_USE_MSIX
 976         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 977                 synchronize_irq(pm8001_ha->msix_entries[i].vector);
 978         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 979                 free_irq(pm8001_ha->msix_entries[i].vector,
 980                                 &(pm8001_ha->irq_vector[i]));
 981         pci_disable_msix(pdev);
 982 #else
 983         free_irq(pm8001_ha->irq, sha);
 984 #endif
 985 #ifdef PM8001_USE_TASKLET
 986         /* For non-msix and msix interrupts */
 987         if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
 988                 tasklet_kill(&pm8001_ha->tasklet[0]);
 989         else
 990                 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
 991                         tasklet_kill(&pm8001_ha->tasklet[j]);
 992 #endif
 993         device_state = pci_choose_state(pdev, state);
 994         pm8001_printk("pdev=0x%p, slot=%s, entering "
 995                       "operating state [D%d]\n", pdev,
 996                       pm8001_ha->name, device_state);
 997         pci_save_state(pdev);
 998         pci_disable_device(pdev);
 999         pci_set_power_state(pdev, device_state);
1000         return 0;
1001 }
1002
1003 /**
1004  * pm8001_pci_resume - power management resume main entry point
1005  * @pdev: PCI device struct
1006  *
1007  * Returns 0 success, anything else error.
1008  */
1009 static int pm8001_pci_resume(struct pci_dev *pdev)
1010 {
1011         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1012         struct pm8001_hba_info *pm8001_ha;
1013         int rc;
1014         u8 i = 0, j;
1015         u32 device_state;
1016         pm8001_ha = sha->lldd_ha;
1017         device_state = pdev->current_state;
1018
1019         pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
1020                 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
1021
1022         pci_set_power_state(pdev, PCI_D0);
1023         pci_enable_wake(pdev, PCI_D0, 0);
1024         pci_restore_state(pdev);
1025         rc = pci_enable_device(pdev);
1026         if (rc) {
1027                 pm8001_printk("slot=%s Enable device failed during resume\n",
1028                               pm8001_ha->name);
1029                 goto err_out_enable;
1030         }
1031
1032         pci_set_master(pdev);
1033         rc = pci_go_44(pdev);
1034         if (rc)
1035                 goto err_out_disable;
1036
1037         /* chip soft rst only for spc */
1038         if (pm8001_ha->chip_id == chip_8001) {
1039                 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1040                 PM8001_INIT_DBG(pm8001_ha,
1041                         pm8001_printk("chip soft reset successful\n"));
1042         }
1043         rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1044         if (rc)
1045                 goto err_out_disable;
1046
1047         /* disable all the interrupt bits */
1048         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1049
1050         rc = pm8001_request_irq(pm8001_ha);
1051         if (rc)
1052                 goto err_out_disable;
1053 #ifdef PM8001_USE_TASKLET
1054         /*  Tasklet for non msi-x interrupt handler */
1055         if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
1056                 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
1057                         (unsigned long)&(pm8001_ha->irq_vector[0]));
1058         else
1059                 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
1060                         tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
1061                                 (unsigned long)&(pm8001_ha->irq_vector[j]));
1062 #endif
1063         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1064         if (pm8001_ha->chip_id != chip_8001) {
1065                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1066                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1067         }
1068         scsi_unblock_requests(pm8001_ha->shost);
1069         return 0;
1070
1071 err_out_disable:
1072         scsi_remove_host(pm8001_ha->shost);
1073         pci_disable_device(pdev);
1074 err_out_enable:
1075         return rc;
1076 }
1077
1078 /* update of pci device, vendor id and driver data with
1079  * unique value for each of the controller
1080  */
1081 static struct pci_device_id pm8001_pci_table[] = {
1082         { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1083         { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1084         /* Support for SPC/SPCv/SPCve controllers */
1085         { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1086         { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1087         { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1088         { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1089         { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1090         { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1091         { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1092         { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1093         { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1094         { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1095         { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1096         { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1097         { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1098         { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1099         { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1100         { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1101                 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1102         { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1103                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1104         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1105                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1106         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1107                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1108         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1109                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1110         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1111                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1112         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1113                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1114         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1115                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1116         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1117                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1118         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1119                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1120         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1121                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1122         { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1123                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1124         { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1125                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1126         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1127                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1128         { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1129                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1130         { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1131                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1132         { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1133                 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1134         { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1135                 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1136         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1137                 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1138         {} /* terminate list */
1139 };
1140
1141 static struct pci_driver pm8001_pci_driver = {
1142         .name           = DRV_NAME,
1143         .id_table       = pm8001_pci_table,
1144         .probe          = pm8001_pci_probe,
1145         .remove         = pm8001_pci_remove,
1146         .suspend        = pm8001_pci_suspend,
1147         .resume         = pm8001_pci_resume,
1148 };
1149
1150 /**
1151  *      pm8001_init - initialize scsi transport template
1152  */
1153 static int __init pm8001_init(void)
1154 {
1155         int rc = -ENOMEM;
1156
1157         pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1158         if (!pm8001_wq)
1159                 goto err;
1160
1161         pm8001_id = 0;
1162         pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1163         if (!pm8001_stt)
1164                 goto err_wq;
1165         rc = pci_register_driver(&pm8001_pci_driver);
1166         if (rc)
1167                 goto err_tp;
1168         return 0;
1169
1170 err_tp:
1171         sas_release_transport(pm8001_stt);
1172 err_wq:
1173         destroy_workqueue(pm8001_wq);
1174 err:
1175         return rc;
1176 }
1177
1178 static void __exit pm8001_exit(void)
1179 {
1180         pci_unregister_driver(&pm8001_pci_driver);
1181         sas_release_transport(pm8001_stt);
1182         destroy_workqueue(pm8001_wq);
1183 }
1184
1185 module_init(pm8001_init);
1186 module_exit(pm8001_exit);
1187
1188 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1189 MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
1190 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
1191 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
1192 MODULE_DESCRIPTION(
1193                 "PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
1194                 "SAS/SATA controller driver");
1195 MODULE_VERSION(DRV_VERSION);
1196 MODULE_LICENSE("GPL");
1197 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
1198