drivers/staging/slicoss/slicoss.c

   1 /**************************************************************************
   2  *
   3  * Copyright  2000-2006 Alacritech, Inc.  All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  *
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above
  12  *    copyright notice, this list of conditions and the following
  13  *    disclaimer in the documentation and/or other materials provided
  14  *    with the distribution.
  15  *
  16  * Alternatively, this software may be distributed under the terms of the
  17  * GNU General Public License ("GPL") version 2 as published by the Free
  18  * Software Foundation.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
  21  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ALACRITECH, INC. OR
  24  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  27  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  28  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  30  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  31  * SUCH DAMAGE.
  32  *
  33  * The views and conclusions contained in the software and documentation
  34  * are those of the authors and should not be interpreted as representing
  35  * official policies, either expressed or implied, of Alacritech, Inc.
  36  *
  37  **************************************************************************/
  38
  39 /*
  40  * FILENAME: slicoss.c
  41  *
  42  * The SLICOSS driver for Alacritech's IS-NIC products.
  43  *
  44  * This driver is supposed to support:
  45  *
  46  *      Mojave cards (single port PCI Gigabit) both copper and fiber
  47  *      Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
  48  *      Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
  49  *
  50  * The driver was actually tested on Oasis and Kalahari cards.
  51  *
  52  *
  53  * NOTE: This is the standard, non-accelerated version of Alacritech's
  54  *       IS-NIC driver.
  55  */
  56
  57
  58 #define KLUDGE_FOR_4GB_BOUNDARY         1
  59 #define DEBUG_MICROCODE                 1
  60 #define DBG                             1
  61 #define SLIC_INTERRUPT_PROCESS_LIMIT    1
  62 #define SLIC_OFFLOAD_IP_CHECKSUM                1
  63 #define STATS_TIMER_INTERVAL                    2
  64 #define PING_TIMER_INTERVAL                         1
  65 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  66
  67 #include <linux/kernel.h>
  68 #include <linux/string.h>
  69 #include <linux/errno.h>
  70 #include <linux/ioport.h>
  71 #include <linux/slab.h>
  72 #include <linux/interrupt.h>
  73 #include <linux/timer.h>
  74 #include <linux/pci.h>
  75 #include <linux/spinlock.h>
  76 #include <linux/init.h>
  77 #include <linux/bitops.h>
  78 #include <linux/io.h>
  79 #include <linux/netdevice.h>
  80 #include <linux/crc32.h>
  81 #include <linux/etherdevice.h>
  82 #include <linux/skbuff.h>
  83 #include <linux/delay.h>
  84 #include <linux/seq_file.h>
  85 #include <linux/kthread.h>
  86 #include <linux/module.h>
  87 #include <linux/moduleparam.h>
  88
  89 #include <linux/firmware.h>
  90 #include <linux/types.h>
  91 #include <linux/dma-mapping.h>
  92 #include <linux/mii.h>
  93 #include <linux/if_vlan.h>
  94 #include <asm/unaligned.h>
  95
  96 #include <linux/ethtool.h>
  97 #include <linux/uaccess.h>
  98 #include "slichw.h"
  99 #include "slic.h"
 100
 101 static uint slic_first_init = 1;
 102 static char *slic_banner = "Alacritech SLIC Technology(tm) Server "
 103                 "and Storage Accelerator (Non-Accelerated)";
 104
 105 static char *slic_proc_version = "2.0.351  2006/07/14 12:26:00";
 106
 107 static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
 108 static int intagg_delay = 100;
 109 static u32 dynamic_intagg;
 110 static unsigned int rcv_count;
 111
 112 #define DRV_NAME          "slicoss"
 113 #define DRV_VERSION       "2.0.1"
 114 #define DRV_AUTHOR        "Alacritech, Inc. Engineering"
 115 #define DRV_DESCRIPTION   "Alacritech SLIC Techonology(tm) "\
 116                 "Non-Accelerated Driver"
 117 #define DRV_COPYRIGHT     "Copyright  2000-2006 Alacritech, Inc. "\
 118                 "All rights reserved."
 119 #define PFX                DRV_NAME " "
 120
 121 MODULE_AUTHOR(DRV_AUTHOR);
 122 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 123 MODULE_LICENSE("Dual BSD/GPL");
 124
 125 module_param(dynamic_intagg, int, 0);
 126 MODULE_PARM_DESC(dynamic_intagg, "Dynamic Interrupt Aggregation Setting");
 127 module_param(intagg_delay, int, 0);
 128 MODULE_PARM_DESC(intagg_delay, "uSec Interrupt Aggregation Delay");
 129
 130 static const struct pci_device_id slic_pci_tbl[] = {
 131         { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_1GB_DEVICE_ID) },
 132         { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_2GB_DEVICE_ID) },
 133         { 0 }
 134 };
 135
 136 MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
 137
 138 static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
 139 {
 140         writel(value, reg);
 141         if (flush)
 142                 mb();
 143 }
 144
 145 static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
 146                                     u32 value, void __iomem *regh, u32 paddrh,
 147                                     bool flush)
 148 {
 149         spin_lock_irqsave(&adapter->bit64reglock.lock,
 150                                 adapter->bit64reglock.flags);
 151         if (paddrh != adapter->curaddrupper) {
 152                 adapter->curaddrupper = paddrh;
 153                 writel(paddrh, regh);
 154         }
 155         writel(value, reg);
 156         if (flush)
 157                 mb();
 158         spin_unlock_irqrestore(&adapter->bit64reglock.lock,
 159                                 adapter->bit64reglock.flags);
 160 }
 161
 162 static void slic_mcast_set_bit(struct adapter *adapter, char *address)
 163 {
 164         unsigned char crcpoly;
 165
 166         /* Get the CRC polynomial for the mac address */
 167         /* we use bits 1-8 (lsb), bitwise reversed,
 168          * msb (= lsb bit 0 before bitrev) is automatically discarded */
 169         crcpoly = (ether_crc(ETH_ALEN, address)>>23);
 170
 171         /* We only have space on the SLIC for 64 entries.  Lop
 172          * off the top two bits. (2^6 = 64)
 173          */
 174         crcpoly &= 0x3F;
 175
 176         /* OR in the new bit into our 64 bit mask. */
 177         adapter->mcastmask |= (u64) 1 << crcpoly;
 178 }
 179
 180 static void slic_mcast_set_mask(struct adapter *adapter)
 181 {
 182         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 183
 184         if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
 185                 /* Turn on all multicast addresses. We have to do this for
 186                  * promiscuous mode as well as ALLMCAST mode.  It saves the
 187                  * Microcode from having to keep state about the MAC
 188                  * configuration.
 189                  */
 190                 slic_reg32_write(&slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
 191                 slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
 192                                  FLUSH);
 193         } else {
 194                 /* Commit our multicast mast to the SLIC by writing to the
 195                  * multicast address mask registers
 196                  */
 197                 slic_reg32_write(&slic_regs->slic_mcastlow,
 198                         (u32)(adapter->mcastmask & 0xFFFFFFFF), FLUSH);
 199                 slic_reg32_write(&slic_regs->slic_mcasthigh,
 200                         (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF), FLUSH);
 201         }
 202 }
 203
 204 static void slic_timer_ping(ulong dev)
 205 {
 206         struct adapter *adapter;
 207         struct sliccard *card;
 208
 209         adapter = netdev_priv((struct net_device *)dev);
 210         card = adapter->card;
 211
 212         adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
 213         add_timer(&adapter->pingtimer);
 214 }
 215
 216 static void slic_unmap_mmio_space(struct adapter *adapter)
 217 {
 218         if (adapter->slic_regs)
 219                 iounmap(adapter->slic_regs);
 220         adapter->slic_regs = NULL;
 221 }
 222
 223 /*
 224  *  slic_link_config
 225  *
 226  *  Write phy control to configure link duplex/speed
 227  *
 228  */
 229 static void slic_link_config(struct adapter *adapter,
 230                       u32 linkspeed, u32 linkduplex)
 231 {
 232         u32 __iomem *wphy;
 233         u32 speed;
 234         u32 duplex;
 235         u32 phy_config;
 236         u32 phy_advreg;
 237         u32 phy_gctlreg;
 238
 239         if (adapter->state != ADAPT_UP)
 240                 return;
 241
 242         if (linkspeed > LINK_1000MB)
 243                 linkspeed = LINK_AUTOSPEED;
 244         if (linkduplex > LINK_AUTOD)
 245                 linkduplex = LINK_AUTOD;
 246
 247         wphy = &adapter->slic_regs->slic_wphy;
 248
 249         if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
 250                 if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
 251                         /*  We've got a fiber gigabit interface, and register
 252                          *  4 is different in fiber mode than in copper mode
 253                          */
 254
 255                         /* advertise FD only @1000 Mb */
 256                         phy_advreg = (MIICR_REG_4 | (PAR_ADV1000XFD));
 257                         /* enable PAUSE frames        */
 258                         phy_advreg |= PAR_ASYMPAUSE_FIBER;
 259                         slic_reg32_write(wphy, phy_advreg, FLUSH);
 260
 261                         if (linkspeed == LINK_AUTOSPEED) {
 262                                 /* reset phy, enable auto-neg  */
 263                                 phy_config =
 264                                     (MIICR_REG_PCR |
 265                                      (PCR_RESET | PCR_AUTONEG |
 266                                       PCR_AUTONEG_RST));
 267                                 slic_reg32_write(wphy, phy_config, FLUSH);
 268                         } else {        /* forced 1000 Mb FD*/
 269                                 /* power down phy to break link
 270                                    this may not work) */
 271                                 phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
 272                                 slic_reg32_write(wphy, phy_config, FLUSH);
 273                                 /* wait, Marvell says 1 sec,
 274                                    try to get away with 10 ms  */
 275                                 mdelay(10);
 276
 277                                 /* disable auto-neg, set speed/duplex,
 278                                    soft reset phy, powerup */
 279                                 phy_config =
 280                                     (MIICR_REG_PCR |
 281                                      (PCR_RESET | PCR_SPEED_1000 |
 282                                       PCR_DUPLEX_FULL));
 283                                 slic_reg32_write(wphy, phy_config, FLUSH);
 284                         }
 285                 } else {        /* copper gigabit */
 286
 287                         /* Auto-Negotiate or 1000 Mb must be auto negotiated
 288                          * We've got a copper gigabit interface, and
 289                          * register 4 is different in copper mode than
 290                          * in fiber mode
 291                          */
 292                         if (linkspeed == LINK_AUTOSPEED) {
 293                                 /* advertise 10/100 Mb modes   */
 294                                 phy_advreg =
 295                                     (MIICR_REG_4 |
 296                                      (PAR_ADV100FD | PAR_ADV100HD | PAR_ADV10FD
 297                                       | PAR_ADV10HD));
 298                         } else {
 299                         /* linkspeed == LINK_1000MB -
 300                            don't advertise 10/100 Mb modes  */
 301                                 phy_advreg = MIICR_REG_4;
 302                         }
 303                         /* enable PAUSE frames  */
 304                         phy_advreg |= PAR_ASYMPAUSE;
 305                         /* required by the Cicada PHY  */
 306                         phy_advreg |= PAR_802_3;
 307                         slic_reg32_write(wphy, phy_advreg, FLUSH);
 308                         /* advertise FD only @1000 Mb  */
 309                         phy_gctlreg = (MIICR_REG_9 | (PGC_ADV1000FD));
 310                         slic_reg32_write(wphy, phy_gctlreg, FLUSH);
 311
 312                         if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 313                                 /* if a Marvell PHY
 314                                    enable auto crossover */
 315                                 phy_config =
 316                                     (MIICR_REG_16 | (MRV_REG16_XOVERON));
 317                                 slic_reg32_write(wphy, phy_config, FLUSH);
 318
 319                                 /* reset phy, enable auto-neg  */
 320                                 phy_config =
 321                                     (MIICR_REG_PCR |
 322                                      (PCR_RESET | PCR_AUTONEG |
 323                                       PCR_AUTONEG_RST));
 324                                 slic_reg32_write(wphy, phy_config, FLUSH);
 325                         } else {        /* it's a Cicada PHY  */
 326                                 /* enable and restart auto-neg (don't reset)  */
 327                                 phy_config =
 328                                     (MIICR_REG_PCR |
 329                                      (PCR_AUTONEG | PCR_AUTONEG_RST));
 330                                 slic_reg32_write(wphy, phy_config, FLUSH);
 331                         }
 332                 }
 333         } else {
 334                 /* Forced 10/100  */
 335                 if (linkspeed == LINK_10MB)
 336                         speed = 0;
 337                 else
 338                         speed = PCR_SPEED_100;
 339                 if (linkduplex == LINK_HALFD)
 340                         duplex = 0;
 341                 else
 342                         duplex = PCR_DUPLEX_FULL;
 343
 344                 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 345                         /* if a Marvell PHY
 346                            disable auto crossover  */
 347                         phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
 348                         slic_reg32_write(wphy, phy_config, FLUSH);
 349                 }
 350
 351                 /* power down phy to break link (this may not work)  */
 352                 phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN | speed | duplex));
 353                 slic_reg32_write(wphy, phy_config, FLUSH);
 354
 355                 /* wait, Marvell says 1 sec, try to get away with 10 ms */
 356                 mdelay(10);
 357
 358                 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 359                         /* if a Marvell PHY
 360                            disable auto-neg, set speed,
 361                            soft reset phy, powerup */
 362                         phy_config =
 363                             (MIICR_REG_PCR | (PCR_RESET | speed | duplex));
 364                         slic_reg32_write(wphy, phy_config, FLUSH);
 365                 } else {        /* it's a Cicada PHY  */
 366                         /* disable auto-neg, set speed, powerup  */
 367                         phy_config = (MIICR_REG_PCR | (speed | duplex));
 368                         slic_reg32_write(wphy, phy_config, FLUSH);
 369                 }
 370         }
 371 }
 372
 373 static int slic_card_download_gbrcv(struct adapter *adapter)
 374 {
 375         const struct firmware *fw;
 376         const char *file = "";
 377         int ret;
 378         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 379         u32 codeaddr;
 380         u32 instruction;
 381         int index = 0;
 382         u32 rcvucodelen = 0;
 383
 384         switch (adapter->devid) {
 385         case SLIC_2GB_DEVICE_ID:
 386                 file = "slicoss/oasisrcvucode.sys";
 387                 break;
 388         case SLIC_1GB_DEVICE_ID:
 389                 file = "slicoss/gbrcvucode.sys";
 390                 break;
 391         default:
 392                 return -ENOENT;
 393         }
 394
 395         ret = request_firmware(&fw, file, &adapter->pcidev->dev);
 396         if (ret) {
 397                 dev_err(&adapter->pcidev->dev,
 398                         "Failed to load firmware %s\n", file);
 399                 return ret;
 400         }
 401
 402         rcvucodelen = *(u32 *)(fw->data + index);
 403         index += 4;
 404         switch (adapter->devid) {
 405         case SLIC_2GB_DEVICE_ID:
 406                 if (rcvucodelen != OasisRcvUCodeLen) {
 407                         release_firmware(fw);
 408                         return -EINVAL;
 409                 }
 410                 break;
 411         case SLIC_1GB_DEVICE_ID:
 412                 if (rcvucodelen != GBRcvUCodeLen) {
 413                         release_firmware(fw);
 414                         return -EINVAL;
 415                 }
 416                 break;
 417         }
 418         /* start download */
 419         slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
 420         /* download the rcv sequencer ucode */
 421         for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
 422                 /* write out instruction address */
 423                 slic_reg32_write(&slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
 424
 425                 instruction = *(u32 *)(fw->data + index);
 426                 index += 4;
 427                 /* write out the instruction data low addr */
 428                 slic_reg32_write(&slic_regs->slic_rcv_wcs, instruction, FLUSH);
 429
 430                 instruction = *(u8 *)(fw->data + index);
 431                 index++;
 432                 /* write out the instruction data high addr */
 433                 slic_reg32_write(&slic_regs->slic_rcv_wcs, (u8)instruction,
 434                                  FLUSH);
 435         }
 436
 437         /* download finished */
 438         release_firmware(fw);
 439         slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
 440         return 0;
 441 }
 442
 443 MODULE_FIRMWARE("slicoss/oasisrcvucode.sys");
 444 MODULE_FIRMWARE("slicoss/gbrcvucode.sys");
 445
 446 static int slic_card_download(struct adapter *adapter)
 447 {
 448         const struct firmware *fw;
 449         const char *file = "";
 450         int ret;
 451         u32 section;
 452         int thissectionsize;
 453         int codeaddr;
 454         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 455         u32 instruction;
 456         u32 baseaddress;
 457         u32 i;
 458         u32 numsects = 0;
 459         u32 sectsize[3];
 460         u32 sectstart[3];
 461         int ucode_start, index = 0;
 462
 463         switch (adapter->devid) {
 464         case SLIC_2GB_DEVICE_ID:
 465                 file = "slicoss/oasisdownload.sys";
 466                 break;
 467         case SLIC_1GB_DEVICE_ID:
 468                 file = "slicoss/gbdownload.sys";
 469                 break;
 470         default:
 471                 return -ENOENT;
 472         }
 473         ret = request_firmware(&fw, file, &adapter->pcidev->dev);
 474         if (ret) {
 475                 dev_err(&adapter->pcidev->dev,
 476                         "Failed to load firmware %s\n", file);
 477                 return ret;
 478         }
 479         numsects = *(u32 *)(fw->data + index);
 480         index += 4;
 481         for (i = 0; i < numsects; i++) {
 482                 sectsize[i] = *(u32 *)(fw->data + index);
 483                 index += 4;
 484         }
 485         for (i = 0; i < numsects; i++) {
 486                 sectstart[i] = *(u32 *)(fw->data + index);
 487                 index += 4;
 488         }
 489         ucode_start = index;
 490         instruction = *(u32 *)(fw->data + index);
 491         index += 4;
 492         for (section = 0; section < numsects; section++) {
 493                 baseaddress = sectstart[section];
 494                 thissectionsize = sectsize[section] >> 3;
 495
 496                 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
 497                         /* Write out instruction address */
 498                         slic_reg32_write(&slic_regs->slic_wcs,
 499                                          baseaddress + codeaddr, FLUSH);
 500                         /* Write out instruction to low addr */
 501                         slic_reg32_write(&slic_regs->slic_wcs,
 502                                         instruction, FLUSH);
 503                         instruction = *(u32 *)(fw->data + index);
 504                         index += 4;
 505
 506                         /* Write out instruction to high addr */
 507                         slic_reg32_write(&slic_regs->slic_wcs,
 508                                         instruction, FLUSH);
 509                         instruction = *(u32 *)(fw->data + index);
 510                         index += 4;
 511                 }
 512         }
 513         index = ucode_start;
 514         for (section = 0; section < numsects; section++) {
 515                 instruction = *(u32 *)(fw->data + index);
 516                 baseaddress = sectstart[section];
 517                 if (baseaddress < 0x8000)
 518                         continue;
 519                 thissectionsize = sectsize[section] >> 3;
 520
 521                 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
 522                         /* Write out instruction address */
 523                         slic_reg32_write(&slic_regs->slic_wcs,
 524                                 SLIC_WCS_COMPARE | (baseaddress + codeaddr),
 525                                 FLUSH);
 526                         /* Write out instruction to low addr */
 527                         slic_reg32_write(&slic_regs->slic_wcs, instruction,
 528                                          FLUSH);
 529                         instruction = *(u32 *)(fw->data + index);
 530                         index += 4;
 531                         /* Write out instruction to high addr */
 532                         slic_reg32_write(&slic_regs->slic_wcs, instruction,
 533                                          FLUSH);
 534                         instruction = *(u32 *)(fw->data + index);
 535                         index += 4;
 536
 537                         /* Check SRAM location zero. If it is non-zero. Abort.*/
 538 /*                      failure = readl((u32 __iomem *)&slic_regs->slic_reset);
 539                         if (failure) {
 540                                 release_firmware(fw);
 541                                 return -EIO;
 542                         }*/
 543                 }
 544         }
 545         release_firmware(fw);
 546         /* Everything OK, kick off the card */
 547         mdelay(10);
 548         slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
 549
 550         /* stall for 20 ms, long enough for ucode to init card
 551            and reach mainloop */
 552         mdelay(20);
 553
 554         return 0;
 555 }
 556
 557 MODULE_FIRMWARE("slicoss/oasisdownload.sys");
 558 MODULE_FIRMWARE("slicoss/gbdownload.sys");
 559
 560 static void slic_adapter_set_hwaddr(struct adapter *adapter)
 561 {
 562         struct sliccard *card = adapter->card;
 563
 564         if ((adapter->card) && (card->config_set)) {
 565                 memcpy(adapter->macaddr,
 566                        card->config.MacInfo[adapter->functionnumber].macaddrA,
 567                        sizeof(struct slic_config_mac));
 568                 if (is_zero_ether_addr(adapter->currmacaddr))
 569                         memcpy(adapter->currmacaddr, adapter->macaddr,
 570                                ETH_ALEN);
 571                 if (adapter->netdev)
 572                         memcpy(adapter->netdev->dev_addr, adapter->currmacaddr,
 573                                ETH_ALEN);
 574         }
 575 }
 576
 577 static void slic_intagg_set(struct adapter *adapter, u32 value)
 578 {
 579         slic_reg32_write(&adapter->slic_regs->slic_intagg, value, FLUSH);
 580         adapter->card->loadlevel_current = value;
 581 }
 582
 583 static void slic_soft_reset(struct adapter *adapter)
 584 {
 585         if (adapter->card->state == CARD_UP) {
 586                 slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
 587                 mdelay(1);
 588         }
 589
 590         slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
 591                          FLUSH);
 592         mdelay(1);
 593 }
 594
 595 static void slic_mac_address_config(struct adapter *adapter)
 596 {
 597         u32 value;
 598         u32 value2;
 599         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 600
 601         value = ntohl(*(__be32 *) &adapter->currmacaddr[2]);
 602         slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
 603         slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
 604
 605         value2 = (u32) ((adapter->currmacaddr[0] << 8 |
 606                              adapter->currmacaddr[1]) & 0xFFFF);
 607
 608         slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
 609         slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
 610
 611         /* Write our multicast mask out to the card.  This is done */
 612         /* here in addition to the slic_mcast_addr_set routine     */
 613         /* because ALL_MCAST may have been enabled or disabled     */
 614         slic_mcast_set_mask(adapter);
 615 }
 616
 617 static void slic_mac_config(struct adapter *adapter)
 618 {
 619         u32 value;
 620         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 621
 622         /* Setup GMAC gaps */
 623         if (adapter->linkspeed == LINK_1000MB) {
 624                 value = ((GMCR_GAPBB_1000 << GMCR_GAPBB_SHIFT) |
 625                          (GMCR_GAPR1_1000 << GMCR_GAPR1_SHIFT) |
 626                          (GMCR_GAPR2_1000 << GMCR_GAPR2_SHIFT));
 627         } else {
 628                 value = ((GMCR_GAPBB_100 << GMCR_GAPBB_SHIFT) |
 629                          (GMCR_GAPR1_100 << GMCR_GAPR1_SHIFT) |
 630                          (GMCR_GAPR2_100 << GMCR_GAPR2_SHIFT));
 631         }
 632
 633         /* enable GMII */
 634         if (adapter->linkspeed == LINK_1000MB)
 635                 value |= GMCR_GBIT;
 636
 637         /* enable fullduplex */
 638         if ((adapter->linkduplex == LINK_FULLD)
 639             || (adapter->macopts & MAC_LOOPBACK)) {
 640                 value |= GMCR_FULLD;
 641         }
 642
 643         /* write mac config */
 644         slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
 645
 646         /* setup mac addresses */
 647         slic_mac_address_config(adapter);
 648 }
 649
 650 static void slic_config_set(struct adapter *adapter, bool linkchange)
 651 {
 652         u32 value;
 653         u32 RcrReset;
 654         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 655
 656         if (linkchange) {
 657                 /* Setup MAC */
 658                 slic_mac_config(adapter);
 659                 RcrReset = GRCR_RESET;
 660         } else {
 661                 slic_mac_address_config(adapter);
 662                 RcrReset = 0;
 663         }
 664
 665         if (adapter->linkduplex == LINK_FULLD) {
 666                 /* setup xmtcfg */
 667                 value = (GXCR_RESET |   /* Always reset     */
 668                          GXCR_XMTEN |   /* Enable transmit  */
 669                          GXCR_PAUSEEN); /* Enable pause     */
 670
 671                 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 672
 673                 /* Setup rcvcfg last */
 674                 value = (RcrReset |     /* Reset, if linkchange */
 675                          GRCR_CTLEN |   /* Enable CTL frames    */
 676                          GRCR_ADDRAEN | /* Address A enable     */
 677                          GRCR_RCVBAD |  /* Rcv bad frames       */
 678                          (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 679         } else {
 680                 /* setup xmtcfg */
 681                 value = (GXCR_RESET |   /* Always reset     */
 682                          GXCR_XMTEN);   /* Enable transmit  */
 683
 684                 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 685
 686                 /* Setup rcvcfg last */
 687                 value = (RcrReset |     /* Reset, if linkchange */
 688                          GRCR_ADDRAEN | /* Address A enable     */
 689                          GRCR_RCVBAD |  /* Rcv bad frames       */
 690                          (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 691         }
 692
 693         if (adapter->state != ADAPT_DOWN) {
 694                 /* Only enable receive if we are restarting or running */
 695                 value |= GRCR_RCVEN;
 696         }
 697
 698         if (adapter->macopts & MAC_PROMISC)
 699                 value |= GRCR_RCVALL;
 700
 701         slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
 702 }
 703
 704 /*
 705  *  Turn off RCV and XMT, power down PHY
 706  */
 707 static void slic_config_clear(struct adapter *adapter)
 708 {
 709         u32 value;
 710         u32 phy_config;
 711         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 712
 713         /* Setup xmtcfg */
 714         value = (GXCR_RESET |   /* Always reset */
 715                  GXCR_PAUSEEN); /* Enable pause */
 716
 717         slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 718
 719         value = (GRCR_RESET |   /* Always reset      */
 720                  GRCR_CTLEN |   /* Enable CTL frames */
 721                  GRCR_ADDRAEN | /* Address A enable  */
 722                  (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 723
 724         slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
 725
 726         /* power down phy */
 727         phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN));
 728         slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
 729 }
 730
 731 static bool slic_mac_filter(struct adapter *adapter,
 732                         struct ether_header *ether_frame)
 733 {
 734         struct net_device *netdev = adapter->netdev;
 735         u32 opts = adapter->macopts;
 736
 737         if (opts & MAC_PROMISC)
 738                 return true;
 739
 740         if (is_broadcast_ether_addr(ether_frame->ether_dhost)) {
 741                 if (opts & MAC_BCAST) {
 742                         adapter->rcv_broadcasts++;
 743                         return true;
 744                 }
 745
 746                 return false;
 747         }
 748
 749         if (is_multicast_ether_addr(ether_frame->ether_dhost)) {
 750                 if (opts & MAC_ALLMCAST) {
 751                         adapter->rcv_multicasts++;
 752                         netdev->stats.multicast++;
 753                         return true;
 754                 }
 755                 if (opts & MAC_MCAST) {
 756                         struct mcast_address *mcaddr = adapter->mcastaddrs;
 757
 758                         while (mcaddr) {
 759                                 if (ether_addr_equal(mcaddr->address,
 760                                                      ether_frame->ether_dhost)) {
 761                                         adapter->rcv_multicasts++;
 762                                         netdev->stats.multicast++;
 763                                         return true;
 764                                 }
 765                                 mcaddr = mcaddr->next;
 766                         }
 767
 768                         return false;
 769                 }
 770
 771                 return false;
 772         }
 773         if (opts & MAC_DIRECTED) {
 774                 adapter->rcv_unicasts++;
 775                 return true;
 776         }
 777         return false;
 778
 779 }
 780
 781 static int slic_mac_set_address(struct net_device *dev, void *ptr)
 782 {
 783         struct adapter *adapter = netdev_priv(dev);
 784         struct sockaddr *addr = ptr;
 785
 786         if (netif_running(dev))
 787                 return -EBUSY;
 788         if (!adapter)
 789                 return -EBUSY;
 790
 791         if (!is_valid_ether_addr(addr->sa_data))
 792                 return -EINVAL;
 793
 794         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 795         memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
 796
 797         slic_config_set(adapter, true);
 798         return 0;
 799 }
 800
 801 static void slic_timer_load_check(ulong cardaddr)
 802 {
 803         struct sliccard *card = (struct sliccard *)cardaddr;
 804         struct adapter *adapter = card->master;
 805         u32 __iomem *intagg;
 806         u32 load = card->events;
 807         u32 level = 0;
 808
 809         if ((adapter) && (adapter->state == ADAPT_UP) &&
 810             (card->state == CARD_UP) && (slic_global.dynamic_intagg)) {
 811                 intagg = &adapter->slic_regs->slic_intagg;
 812                 if (adapter->devid == SLIC_1GB_DEVICE_ID) {
 813                         if (adapter->linkspeed == LINK_1000MB)
 814                                 level = 100;
 815                         else {
 816                                 if (load > SLIC_LOAD_5)
 817                                         level = SLIC_INTAGG_5;
 818                                 else if (load > SLIC_LOAD_4)
 819                                         level = SLIC_INTAGG_4;
 820                                 else if (load > SLIC_LOAD_3)
 821                                         level = SLIC_INTAGG_3;
 822                                 else if (load > SLIC_LOAD_2)
 823                                         level = SLIC_INTAGG_2;
 824                                 else if (load > SLIC_LOAD_1)
 825                                         level = SLIC_INTAGG_1;
 826                                 else
 827                                         level = SLIC_INTAGG_0;
 828                         }
 829                         if (card->loadlevel_current != level) {
 830                                 card->loadlevel_current = level;
 831                                 slic_reg32_write(intagg, level, FLUSH);
 832                         }
 833                 } else {
 834                         if (load > SLIC_LOAD_5)
 835                                 level = SLIC_INTAGG_5;
 836                         else if (load > SLIC_LOAD_4)
 837                                 level = SLIC_INTAGG_4;
 838                         else if (load > SLIC_LOAD_3)
 839                                 level = SLIC_INTAGG_3;
 840                         else if (load > SLIC_LOAD_2)
 841                                 level = SLIC_INTAGG_2;
 842                         else if (load > SLIC_LOAD_1)
 843                                 level = SLIC_INTAGG_1;
 844                         else
 845                                 level = SLIC_INTAGG_0;
 846                         if (card->loadlevel_current != level) {
 847                                 card->loadlevel_current = level;
 848                                 slic_reg32_write(intagg, level, FLUSH);
 849                         }
 850                 }
 851         }
 852         card->events = 0;
 853         card->loadtimer.expires = jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
 854         add_timer(&card->loadtimer);
 855 }
 856
 857 static int slic_upr_queue_request(struct adapter *adapter,
 858                            u32 upr_request,
 859                            u32 upr_data,
 860                            u32 upr_data_h,
 861                            u32 upr_buffer, u32 upr_buffer_h)
 862 {
 863         struct slic_upr *upr;
 864         struct slic_upr *uprqueue;
 865
 866         upr = kmalloc(sizeof(struct slic_upr), GFP_ATOMIC);
 867         if (!upr)
 868                 return -ENOMEM;
 869
 870         upr->adapter = adapter->port;
 871         upr->upr_request = upr_request;
 872         upr->upr_data = upr_data;
 873         upr->upr_buffer = upr_buffer;
 874         upr->upr_data_h = upr_data_h;
 875         upr->upr_buffer_h = upr_buffer_h;
 876         upr->next = NULL;
 877         if (adapter->upr_list) {
 878                 uprqueue = adapter->upr_list;
 879
 880                 while (uprqueue->next)
 881                         uprqueue = uprqueue->next;
 882                 uprqueue->next = upr;
 883         } else {
 884                 adapter->upr_list = upr;
 885         }
 886         return 0;
 887 }
 888
 889 static void slic_upr_start(struct adapter *adapter)
 890 {
 891         struct slic_upr *upr;
 892         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 893 /*
 894     char * ptr1;
 895     char * ptr2;
 896     uint cmdoffset;
 897 */
 898         upr = adapter->upr_list;
 899         if (!upr)
 900                 return;
 901         if (adapter->upr_busy)
 902                 return;
 903         adapter->upr_busy = 1;
 904
 905         switch (upr->upr_request) {
 906         case SLIC_UPR_STATS:
 907                 if (upr->upr_data_h == 0) {
 908                         slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
 909                                          FLUSH);
 910                 } else {
 911                         slic_reg64_write(adapter, &slic_regs->slic_stats64,
 912                                          upr->upr_data,
 913                                          &slic_regs->slic_addr_upper,
 914                                          upr->upr_data_h, FLUSH);
 915                 }
 916                 break;
 917
 918         case SLIC_UPR_RLSR:
 919                 slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
 920                                  &slic_regs->slic_addr_upper, upr->upr_data_h,
 921                                  FLUSH);
 922                 break;
 923
 924         case SLIC_UPR_RCONFIG:
 925                 slic_reg64_write(adapter, &slic_regs->slic_rconfig,
 926                                  upr->upr_data, &slic_regs->slic_addr_upper,
 927                                  upr->upr_data_h, FLUSH);
 928                 break;
 929         case SLIC_UPR_PING:
 930                 slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
 931                 break;
 932         }
 933 }
 934
 935 static int slic_upr_request(struct adapter *adapter,
 936                      u32 upr_request,
 937                      u32 upr_data,
 938                      u32 upr_data_h,
 939                      u32 upr_buffer, u32 upr_buffer_h)
 940 {
 941         int rc;
 942
 943         spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
 944         rc = slic_upr_queue_request(adapter,
 945                                         upr_request,
 946                                         upr_data,
 947                                         upr_data_h, upr_buffer, upr_buffer_h);
 948         if (rc)
 949                 goto err_unlock_irq;
 950
 951         slic_upr_start(adapter);
 952 err_unlock_irq:
 953         spin_unlock_irqrestore(&adapter->upr_lock.lock,
 954                                 adapter->upr_lock.flags);
 955         return rc;
 956 }
 957
 958 static void slic_link_upr_complete(struct adapter *adapter, u32 isr)
 959 {
 960         u32 linkstatus = adapter->pshmem->linkstatus;
 961         uint linkup;
 962         unsigned char linkspeed;
 963         unsigned char linkduplex;
 964
 965         if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
 966                 struct slic_shmem *pshmem;
 967
 968                 pshmem = (struct slic_shmem *)(unsigned long)
 969                          adapter->phys_shmem;
 970 #if BITS_PER_LONG == 64
 971                 slic_upr_queue_request(adapter,
 972                                        SLIC_UPR_RLSR,
 973                                        SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
 974                                        SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
 975                                        0, 0);
 976 #else
 977                 slic_upr_queue_request(adapter,
 978                                        SLIC_UPR_RLSR,
 979                                        (u32) &pshmem->linkstatus,
 980                                        SLIC_GET_ADDR_HIGH(pshmem), 0, 0);
 981 #endif
 982                 return;
 983         }
 984         if (adapter->state != ADAPT_UP)
 985                 return;
 986
 987         linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
 988         if (linkstatus & GIG_SPEED_1000)
 989                 linkspeed = LINK_1000MB;
 990         else if (linkstatus & GIG_SPEED_100)
 991                 linkspeed = LINK_100MB;
 992         else
 993                 linkspeed = LINK_10MB;
 994
 995         if (linkstatus & GIG_FULLDUPLEX)
 996                 linkduplex = LINK_FULLD;
 997         else
 998                 linkduplex = LINK_HALFD;
 999
1000         if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
1001                 return;
1002
1003         /* link up event, but nothing has changed */
1004         if ((adapter->linkstate == LINK_UP) &&
1005             (linkup == LINK_UP) &&
1006             (adapter->linkspeed == linkspeed) &&
1007             (adapter->linkduplex == linkduplex))
1008                 return;
1009
1010         /* link has changed at this point */
1011
1012         /* link has gone from up to down */
1013         if (linkup == LINK_DOWN) {
1014                 adapter->linkstate = LINK_DOWN;
1015                 return;
1016         }
1017
1018         /* link has gone from down to up */
1019         adapter->linkspeed = linkspeed;
1020         adapter->linkduplex = linkduplex;
1021
1022         if (adapter->linkstate != LINK_UP) {
1023                 /* setup the mac */
1024                 slic_config_set(adapter, true);
1025                 adapter->linkstate = LINK_UP;
1026                 netif_start_queue(adapter->netdev);
1027         }
1028 }
1029
1030 static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
1031 {
1032         struct sliccard *card = adapter->card;
1033         struct slic_upr *upr;
1034
1035         spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
1036         upr = adapter->upr_list;
1037         if (!upr) {
1038                 spin_unlock_irqrestore(&adapter->upr_lock.lock,
1039                                         adapter->upr_lock.flags);
1040                 return;
1041         }
1042         adapter->upr_list = upr->next;
1043         upr->next = NULL;
1044         adapter->upr_busy = 0;
1045         switch (upr->upr_request) {
1046         case SLIC_UPR_STATS:
1047                 {
1048                         struct slic_stats *slicstats =
1049                             (struct slic_stats *) &adapter->pshmem->inicstats;
1050                         struct slic_stats *newstats = slicstats;
1051                         struct slic_stats  *old = &adapter->inicstats_prev;
1052                         struct slicnet_stats *stst = &adapter->slic_stats;
1053
1054                         if (isr & ISR_UPCERR) {
1055                                 dev_err(&adapter->netdev->dev,
1056                                         "SLIC_UPR_STATS command failed isr[%x]\n",
1057                                         isr);
1058
1059                                 break;
1060                         }
1061                         UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs,
1062                                         newstats->xmit_tcp_segs_gb,
1063                                         old->xmit_tcp_segs_gb);
1064
1065                         UPDATE_STATS_GB(stst->tcp.xmit_tcp_bytes,
1066                                         newstats->xmit_tcp_bytes_gb,
1067                                         old->xmit_tcp_bytes_gb);
1068
1069                         UPDATE_STATS_GB(stst->tcp.rcv_tcp_segs,
1070                                         newstats->rcv_tcp_segs_gb,
1071                                         old->rcv_tcp_segs_gb);
1072
1073                         UPDATE_STATS_GB(stst->tcp.rcv_tcp_bytes,
1074                                         newstats->rcv_tcp_bytes_gb,
1075                                         old->rcv_tcp_bytes_gb);
1076
1077                         UPDATE_STATS_GB(stst->iface.xmt_bytes,
1078                                         newstats->xmit_bytes_gb,
1079                                         old->xmit_bytes_gb);
1080
1081                         UPDATE_STATS_GB(stst->iface.xmt_ucast,
1082                                         newstats->xmit_unicasts_gb,
1083                                         old->xmit_unicasts_gb);
1084
1085                         UPDATE_STATS_GB(stst->iface.rcv_bytes,
1086                                         newstats->rcv_bytes_gb,
1087                                         old->rcv_bytes_gb);
1088
1089                         UPDATE_STATS_GB(stst->iface.rcv_ucast,
1090                                         newstats->rcv_unicasts_gb,
1091                                         old->rcv_unicasts_gb);
1092
1093                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1094                                         newstats->xmit_collisions_gb,
1095                                         old->xmit_collisions_gb);
1096
1097                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1098                                         newstats->xmit_excess_collisions_gb,
1099                                         old->xmit_excess_collisions_gb);
1100
1101                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1102                                         newstats->xmit_other_error_gb,
1103                                         old->xmit_other_error_gb);
1104
1105                         UPDATE_STATS_GB(stst->iface.rcv_errors,
1106                                         newstats->rcv_other_error_gb,
1107                                         old->rcv_other_error_gb);
1108
1109                         UPDATE_STATS_GB(stst->iface.rcv_discards,
1110                                         newstats->rcv_drops_gb,
1111                                         old->rcv_drops_gb);
1112
1113                         if (newstats->rcv_drops_gb > old->rcv_drops_gb) {
1114                                 adapter->rcv_drops +=
1115                                     (newstats->rcv_drops_gb -
1116                                      old->rcv_drops_gb);
1117                         }
1118                         memcpy(old, newstats, sizeof(struct slic_stats));
1119                         break;
1120                 }
1121         case SLIC_UPR_RLSR:
1122                 slic_link_upr_complete(adapter, isr);
1123                 break;
1124         case SLIC_UPR_RCONFIG:
1125                 break;
1126         case SLIC_UPR_PING:
1127                 card->pingstatus |= (isr & ISR_PINGDSMASK);
1128                 break;
1129         }
1130         kfree(upr);
1131         slic_upr_start(adapter);
1132         spin_unlock_irqrestore(&adapter->upr_lock.lock,
1133                                 adapter->upr_lock.flags);
1134 }
1135
1136 static int slic_config_get(struct adapter *adapter, u32 config, u32 config_h)
1137 {
1138         return slic_upr_request(adapter, SLIC_UPR_RCONFIG, config, config_h,
1139                                 0, 0);
1140 }
1141
1142 /*
1143  * Compute a checksum of the EEPROM according to RFC 1071.
1144  */
1145 static u16 slic_eeprom_cksum(void *eeprom, unsigned len)
1146 {
1147         u16 *wp = eeprom;
1148         u32 checksum = 0;
1149
1150         while (len > 1) {
1151                 checksum += *(wp++);
1152                 len -= 2;
1153         }
1154
1155         if (len > 0)
1156                 checksum += *(u8 *) wp;
1157
1158
1159         while (checksum >> 16)
1160                 checksum = (checksum & 0xFFFF) + ((checksum >> 16) & 0xFFFF);
1161
1162         return ~checksum;
1163 }
1164
1165 static void slic_rspqueue_free(struct adapter *adapter)
1166 {
1167         int i;
1168         struct slic_rspqueue *rspq = &adapter->rspqueue;
1169
1170         for (i = 0; i < rspq->num_pages; i++) {
1171                 if (rspq->vaddr[i]) {
1172                         pci_free_consistent(adapter->pcidev, PAGE_SIZE,
1173                                             rspq->vaddr[i], rspq->paddr[i]);
1174                 }
1175                 rspq->vaddr[i] = NULL;
1176                 rspq->paddr[i] = 0;
1177         }
1178         rspq->offset = 0;
1179         rspq->pageindex = 0;
1180         rspq->rspbuf = NULL;
1181 }
1182
1183 static int slic_rspqueue_init(struct adapter *adapter)
1184 {
1185         int i;
1186         struct slic_rspqueue *rspq = &adapter->rspqueue;
1187         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
1188         u32 paddrh = 0;
1189
1190         memset(rspq, 0, sizeof(struct slic_rspqueue));
1191
1192         rspq->num_pages = SLIC_RSPQ_PAGES_GB;
1193
1194         for (i = 0; i < rspq->num_pages; i++) {
1195                 rspq->vaddr[i] = pci_zalloc_consistent(adapter->pcidev,
1196                                                        PAGE_SIZE,
1197                                                        &rspq->paddr[i]);
1198                 if (!rspq->vaddr[i]) {
1199                         dev_err(&adapter->pcidev->dev,
1200                                 "pci_alloc_consistent failed\n");
1201                         slic_rspqueue_free(adapter);
1202                         return -ENOMEM;
1203                 }
1204
1205                 if (paddrh == 0) {
1206                         slic_reg32_write(&slic_regs->slic_rbar,
1207                                 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1208                                 DONT_FLUSH);
1209                 } else {
1210                         slic_reg64_write(adapter, &slic_regs->slic_rbar64,
1211                                 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1212                                 &slic_regs->slic_addr_upper,
1213                                 paddrh, DONT_FLUSH);
1214                 }
1215         }
1216         rspq->offset = 0;
1217         rspq->pageindex = 0;
1218         rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
1219         return 0;
1220 }
1221
1222 static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter)
1223 {
1224         struct slic_rspqueue *rspq = &adapter->rspqueue;
1225         struct slic_rspbuf *buf;
1226
1227         if (!(rspq->rspbuf->status))
1228                 return NULL;
1229
1230         buf = rspq->rspbuf;
1231         if (++rspq->offset < SLIC_RSPQ_BUFSINPAGE) {
1232                 rspq->rspbuf++;
1233         } else {
1234                 slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
1235                         (rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
1236                         &adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
1237                 rspq->pageindex = (rspq->pageindex + 1) % rspq->num_pages;
1238                 rspq->offset = 0;
1239                 rspq->rspbuf = (struct slic_rspbuf *)
1240                                                 rspq->vaddr[rspq->pageindex];
1241         }
1242
1243         return buf;
1244 }
1245
1246 static void slic_cmdqmem_free(struct adapter *adapter)
1247 {
1248         struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1249         int i;
1250
1251         for (i = 0; i < SLIC_CMDQ_MAXPAGES; i++) {
1252                 if (cmdqmem->pages[i]) {
1253                         pci_free_consistent(adapter->pcidev,
1254                                             PAGE_SIZE,
1255                                             (void *) cmdqmem->pages[i],
1256                                             cmdqmem->dma_pages[i]);
1257                 }
1258         }
1259         memset(cmdqmem, 0, sizeof(struct slic_cmdqmem));
1260 }
1261
1262 static u32 *slic_cmdqmem_addpage(struct adapter *adapter)
1263 {
1264         struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1265         u32 *pageaddr;
1266
1267         if (cmdqmem->pagecnt >= SLIC_CMDQ_MAXPAGES)
1268                 return NULL;
1269         pageaddr = pci_alloc_consistent(adapter->pcidev,
1270                                         PAGE_SIZE,
1271                                         &cmdqmem->dma_pages[cmdqmem->pagecnt]);
1272         if (!pageaddr)
1273                 return NULL;
1274
1275         cmdqmem->pages[cmdqmem->pagecnt] = pageaddr;
1276         cmdqmem->pagecnt++;
1277         return pageaddr;
1278 }
1279
1280 static void slic_cmdq_free(struct adapter *adapter)
1281 {
1282         struct slic_hostcmd *cmd;
1283
1284         cmd = adapter->cmdq_all.head;
1285         while (cmd) {
1286                 if (cmd->busy) {
1287                         struct sk_buff *tempskb;
1288
1289                         tempskb = cmd->skb;
1290                         if (tempskb) {
1291                                 cmd->skb = NULL;
1292                                 dev_kfree_skb_irq(tempskb);
1293                         }
1294                 }
1295                 cmd = cmd->next_all;
1296         }
1297         memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1298         memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1299         memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1300         slic_cmdqmem_free(adapter);
1301 }
1302
1303 static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
1304 {
1305         struct slic_hostcmd *cmd;
1306         struct slic_hostcmd *prev;
1307         struct slic_hostcmd *tail;
1308         struct slic_cmdqueue *cmdq;
1309         int cmdcnt;
1310         void *cmdaddr;
1311         ulong phys_addr;
1312         u32 phys_addrl;
1313         u32 phys_addrh;
1314         struct slic_handle *pslic_handle;
1315
1316         cmdaddr = page;
1317         cmd = (struct slic_hostcmd *)cmdaddr;
1318         cmdcnt = 0;
1319
1320         phys_addr = virt_to_bus((void *)page);
1321         phys_addrl = SLIC_GET_ADDR_LOW(phys_addr);
1322         phys_addrh = SLIC_GET_ADDR_HIGH(phys_addr);
1323
1324         prev = NULL;
1325         tail = cmd;
1326         while ((cmdcnt < SLIC_CMDQ_CMDSINPAGE) &&
1327                (adapter->slic_handle_ix < 256)) {
1328                 /* Allocate and initialize a SLIC_HANDLE for this command */
1329                 spin_lock_irqsave(&adapter->handle_lock.lock,
1330                                 adapter->handle_lock.flags);
1331                 pslic_handle  =  adapter->pfree_slic_handles;
1332                 adapter->pfree_slic_handles = pslic_handle->next;
1333                 spin_unlock_irqrestore(&adapter->handle_lock.lock,
1334                                 adapter->handle_lock.flags);
1335                 pslic_handle->type = SLIC_HANDLE_CMD;
1336                 pslic_handle->address = (void *) cmd;
1337                 pslic_handle->offset = (ushort) adapter->slic_handle_ix++;
1338                 pslic_handle->other_handle = NULL;
1339                 pslic_handle->next = NULL;
1340
1341                 cmd->pslic_handle = pslic_handle;
1342                 cmd->cmd64.hosthandle = pslic_handle->token.handle_token;
1343                 cmd->busy = false;
1344                 cmd->paddrl = phys_addrl;
1345                 cmd->paddrh = phys_addrh;
1346                 cmd->next_all = prev;
1347                 cmd->next = prev;
1348                 prev = cmd;
1349                 phys_addrl += SLIC_HOSTCMD_SIZE;
1350                 cmdaddr += SLIC_HOSTCMD_SIZE;
1351
1352                 cmd = (struct slic_hostcmd *)cmdaddr;
1353                 cmdcnt++;
1354         }
1355
1356         cmdq = &adapter->cmdq_all;
1357         cmdq->count += cmdcnt;  /*  SLIC_CMDQ_CMDSINPAGE;   mooktodo */
1358         tail->next_all = cmdq->head;
1359         cmdq->head = prev;
1360         cmdq = &adapter->cmdq_free;
1361         spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
1362         cmdq->count += cmdcnt;  /*  SLIC_CMDQ_CMDSINPAGE;   mooktodo */
1363         tail->next = cmdq->head;
1364         cmdq->head = prev;
1365         spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
1366 }
1367
1368 static int slic_cmdq_init(struct adapter *adapter)
1369 {
1370         int i;
1371         u32 *pageaddr;
1372
1373         memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1374         memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1375         memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1376         spin_lock_init(&adapter->cmdq_all.lock.lock);
1377         spin_lock_init(&adapter->cmdq_free.lock.lock);
1378         spin_lock_init(&adapter->cmdq_done.lock.lock);
1379         memset(&adapter->cmdqmem, 0, sizeof(struct slic_cmdqmem));
1380         adapter->slic_handle_ix = 1;
1381         for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
1382                 pageaddr = slic_cmdqmem_addpage(adapter);
1383                 if (!pageaddr) {
1384                         slic_cmdq_free(adapter);
1385                         return -ENOMEM;
1386                 }
1387                 slic_cmdq_addcmdpage(adapter, pageaddr);
1388         }
1389         adapter->slic_handle_ix = 1;
1390
1391         return 0;
1392 }
1393
1394 static void slic_cmdq_reset(struct adapter *adapter)
1395 {
1396         struct slic_hostcmd *hcmd;
1397         struct sk_buff *skb;
1398         u32 outstanding;
1399
1400         spin_lock_irqsave(&adapter->cmdq_free.lock.lock,
1401                         adapter->cmdq_free.lock.flags);
1402         spin_lock_irqsave(&adapter->cmdq_done.lock.lock,
1403                         adapter->cmdq_done.lock.flags);
1404         outstanding = adapter->cmdq_all.count - adapter->cmdq_done.count;
1405         outstanding -= adapter->cmdq_free.count;
1406         hcmd = adapter->cmdq_all.head;
1407         while (hcmd) {
1408                 if (hcmd->busy) {
1409                         skb = hcmd->skb;
1410                         hcmd->busy = 0;
1411                         hcmd->skb = NULL;
1412                         dev_kfree_skb_irq(skb);
1413                 }
1414                 hcmd = hcmd->next_all;
1415         }
1416         adapter->cmdq_free.count = 0;
1417         adapter->cmdq_free.head = NULL;
1418         adapter->cmdq_free.tail = NULL;
1419         adapter->cmdq_done.count = 0;
1420         adapter->cmdq_done.head = NULL;
1421         adapter->cmdq_done.tail = NULL;
1422         adapter->cmdq_free.head = adapter->cmdq_all.head;
1423         hcmd = adapter->cmdq_all.head;
1424         while (hcmd) {
1425                 adapter->cmdq_free.count++;
1426                 hcmd->next = hcmd->next_all;
1427                 hcmd = hcmd->next_all;
1428         }
1429         if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
1430                 dev_err(&adapter->netdev->dev,
1431                         "free_count %d != all count %d\n",
1432                         adapter->cmdq_free.count, adapter->cmdq_all.count);
1433         }
1434         spin_unlock_irqrestore(&adapter->cmdq_done.lock.lock,
1435                                 adapter->cmdq_done.lock.flags);
1436         spin_unlock_irqrestore(&adapter->cmdq_free.lock.lock,
1437                                 adapter->cmdq_free.lock.flags);
1438 }
1439
1440 static void slic_cmdq_getdone(struct adapter *adapter)
1441 {
1442         struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
1443         struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
1444
1445         spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
1446
1447         free_cmdq->head = done_cmdq->head;
1448         free_cmdq->count = done_cmdq->count;
1449         done_cmdq->head = NULL;
1450         done_cmdq->tail = NULL;
1451         done_cmdq->count = 0;
1452         spin_unlock_irqrestore(&done_cmdq->lock.lock, done_cmdq->lock.flags);
1453 }
1454
1455 static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter)
1456 {
1457         struct slic_cmdqueue *cmdq = &adapter->cmdq_free;
1458         struct slic_hostcmd *cmd = NULL;
1459
1460 lock_and_retry:
1461         spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
1462 retry:
1463         cmd = cmdq->head;
1464         if (cmd) {
1465                 cmdq->head = cmd->next;
1466                 cmdq->count--;
1467                 spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
1468         } else {
1469                 slic_cmdq_getdone(adapter);
1470                 cmd = cmdq->head;
1471                 if (cmd) {
1472                         goto retry;
1473                 } else {
1474                         u32 *pageaddr;
1475
1476                         spin_unlock_irqrestore(&cmdq->lock.lock,
1477                                                 cmdq->lock.flags);
1478                         pageaddr = slic_cmdqmem_addpage(adapter);
1479                         if (pageaddr) {
1480                                 slic_cmdq_addcmdpage(adapter, pageaddr);
1481                                 goto lock_and_retry;
1482                         }
1483                 }
1484         }
1485         return cmd;
1486 }
1487
1488 static void slic_cmdq_putdone_irq(struct adapter *adapter,
1489                                 struct slic_hostcmd *cmd)
1490 {
1491         struct slic_cmdqueue *cmdq = &adapter->cmdq_done;
1492
1493         spin_lock(&cmdq->lock.lock);
1494         cmd->busy = 0;
1495         cmd->next = cmdq->head;
1496         cmdq->head = cmd;
1497         cmdq->count++;
1498         if ((adapter->xmitq_full) && (cmdq->count > 10))
1499                 netif_wake_queue(adapter->netdev);
1500         spin_unlock(&cmdq->lock.lock);
1501 }
1502
1503 static int slic_rcvqueue_fill(struct adapter *adapter)
1504 {
1505         void *paddr;
1506         u32 paddrl;
1507         u32 paddrh;
1508         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1509         int i = 0;
1510         struct device *dev = &adapter->netdev->dev;
1511
1512         while (i < SLIC_RCVQ_FILLENTRIES) {
1513                 struct slic_rcvbuf *rcvbuf;
1514                 struct sk_buff *skb;
1515 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1516 retry_rcvqfill:
1517 #endif
1518                 skb = alloc_skb(SLIC_RCVQ_RCVBUFSIZE, GFP_ATOMIC);
1519                 if (skb) {
1520                         paddr = (void *)(unsigned long)
1521                                 pci_map_single(adapter->pcidev,
1522                                                skb->data,
1523                                                SLIC_RCVQ_RCVBUFSIZE,
1524                                                PCI_DMA_FROMDEVICE);
1525                         paddrl = SLIC_GET_ADDR_LOW(paddr);
1526                         paddrh = SLIC_GET_ADDR_HIGH(paddr);
1527
1528                         skb->len = SLIC_RCVBUF_HEADSIZE;
1529                         rcvbuf = (struct slic_rcvbuf *)skb->head;
1530                         rcvbuf->status = 0;
1531                         skb->next = NULL;
1532 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1533                         if (paddrl == 0) {
1534                                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1535                                         __func__);
1536                                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1537                                 dev_err(dev, "         skbdata[%p]\n",
1538                                                 skb->data);
1539                                 dev_err(dev, "         skblen[%x]\n", skb->len);
1540                                 dev_err(dev, "         paddr[%p]\n", paddr);
1541                                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1542                                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1543                                 dev_err(dev, "         rcvq->head[%p]\n",
1544                                                 rcvq->head);
1545                                 dev_err(dev, "         rcvq->tail[%p]\n",
1546                                                 rcvq->tail);
1547                                 dev_err(dev, "         rcvq->count[%x]\n",
1548                                                 rcvq->count);
1549                                 dev_err(dev, "SKIP THIS SKB!!!!!!!!\n");
1550                                 goto retry_rcvqfill;
1551                         }
1552 #else
1553                         if (paddrl == 0) {
1554                                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1555                                         __func__);
1556                                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1557                                 dev_err(dev, "         skbdata[%p]\n",
1558                                                 skb->data);
1559                                 dev_err(dev, "         skblen[%x]\n", skb->len);
1560                                 dev_err(dev, "         paddr[%p]\n", paddr);
1561                                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1562                                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1563                                 dev_err(dev, "         rcvq->head[%p]\n",
1564                                                 rcvq->head);
1565                                 dev_err(dev, "         rcvq->tail[%p]\n",
1566                                                 rcvq->tail);
1567                                 dev_err(dev, "         rcvq->count[%x]\n",
1568                                                 rcvq->count);
1569                                 dev_err(dev, "GIVE TO CARD ANYWAY\n");
1570                         }
1571 #endif
1572                         if (paddrh == 0) {
1573                                 slic_reg32_write(&adapter->slic_regs->slic_hbar,
1574                                                  (u32)paddrl, DONT_FLUSH);
1575                         } else {
1576                                 slic_reg64_write(adapter,
1577                                         &adapter->slic_regs->slic_hbar64,
1578                                         paddrl,
1579                                         &adapter->slic_regs->slic_addr_upper,
1580                                         paddrh, DONT_FLUSH);
1581                         }
1582                         if (rcvq->head)
1583                                 rcvq->tail->next = skb;
1584                         else
1585                                 rcvq->head = skb;
1586                         rcvq->tail = skb;
1587                         rcvq->count++;
1588                         i++;
1589                 } else {
1590                         dev_err(&adapter->netdev->dev,
1591                                 "slic_rcvqueue_fill could only get [%d] skbuffs\n",
1592                                 i);
1593                         break;
1594                 }
1595         }
1596         return i;
1597 }
1598
1599 static void slic_rcvqueue_free(struct adapter *adapter)
1600 {
1601         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1602         struct sk_buff *skb;
1603
1604         while (rcvq->head) {
1605                 skb = rcvq->head;
1606                 rcvq->head = rcvq->head->next;
1607                 dev_kfree_skb(skb);
1608         }
1609         rcvq->tail = NULL;
1610         rcvq->head = NULL;
1611         rcvq->count = 0;
1612 }
1613
1614 static int slic_rcvqueue_init(struct adapter *adapter)
1615 {
1616         int i, count;
1617         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1618
1619         rcvq->tail = NULL;
1620         rcvq->head = NULL;
1621         rcvq->size = SLIC_RCVQ_ENTRIES;
1622         rcvq->errors = 0;
1623         rcvq->count = 0;
1624         i = SLIC_RCVQ_ENTRIES / SLIC_RCVQ_FILLENTRIES;
1625         count = 0;
1626         while (i) {
1627                 count += slic_rcvqueue_fill(adapter);
1628                 i--;
1629         }
1630         if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
1631                 slic_rcvqueue_free(adapter);
1632                 return -ENOMEM;
1633         }
1634         return 0;
1635 }
1636
1637 static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter)
1638 {
1639         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1640         struct sk_buff *skb;
1641         struct slic_rcvbuf *rcvbuf;
1642         int count;
1643
1644         if (rcvq->count) {
1645                 skb = rcvq->head;
1646                 rcvbuf = (struct slic_rcvbuf *)skb->head;
1647
1648                 if (rcvbuf->status & IRHDDR_SVALID) {
1649                         rcvq->head = rcvq->head->next;
1650                         skb->next = NULL;
1651                         rcvq->count--;
1652                 } else {
1653                         skb = NULL;
1654                 }
1655         } else {
1656                 dev_err(&adapter->netdev->dev,
1657                         "RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
1658                 skb = NULL;
1659         }
1660         while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
1661                 count = slic_rcvqueue_fill(adapter);
1662                 if (!count)
1663                         break;
1664         }
1665         if (skb)
1666                 rcvq->errors = 0;
1667         return skb;
1668 }
1669
1670 static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
1671 {
1672         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1673         void *paddr;
1674         u32 paddrl;
1675         u32 paddrh;
1676         struct slic_rcvbuf *rcvbuf = (struct slic_rcvbuf *)skb->head;
1677         struct device *dev;
1678
1679         paddr = (void *)(unsigned long)
1680                 pci_map_single(adapter->pcidev, skb->head,
1681                                SLIC_RCVQ_RCVBUFSIZE, PCI_DMA_FROMDEVICE);
1682         rcvbuf->status = 0;
1683         skb->next = NULL;
1684
1685         paddrl = SLIC_GET_ADDR_LOW(paddr);
1686         paddrh = SLIC_GET_ADDR_HIGH(paddr);
1687
1688         if (paddrl == 0) {
1689                 dev = &adapter->netdev->dev;
1690                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1691                         __func__);
1692                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1693                 dev_err(dev, "         skbdata[%p]\n", skb->data);
1694                 dev_err(dev, "         skblen[%x]\n", skb->len);
1695                 dev_err(dev, "         paddr[%p]\n", paddr);
1696                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1697                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1698                 dev_err(dev, "         rcvq->head[%p]\n", rcvq->head);
1699                 dev_err(dev, "         rcvq->tail[%p]\n", rcvq->tail);
1700                 dev_err(dev, "         rcvq->count[%x]\n", rcvq->count);
1701         }
1702         if (paddrh == 0) {
1703                 slic_reg32_write(&adapter->slic_regs->slic_hbar, (u32)paddrl,
1704                                  DONT_FLUSH);
1705         } else {
1706                 slic_reg64_write(adapter, &adapter->slic_regs->slic_hbar64,
1707                                  paddrl, &adapter->slic_regs->slic_addr_upper,
1708                                  paddrh, DONT_FLUSH);
1709         }
1710         if (rcvq->head)
1711                 rcvq->tail->next = skb;
1712         else
1713                 rcvq->head = skb;
1714         rcvq->tail = skb;
1715         rcvq->count++;
1716         return rcvq->count;
1717 }
1718
1719 /*
1720  * slic_link_event_handler -
1721  *
1722  * Initiate a link configuration sequence.  The link configuration begins
1723  * by issuing a READ_LINK_STATUS command to the Utility Processor on the
1724  * SLIC.  Since the command finishes asynchronously, the slic_upr_comlete
1725  * routine will follow it up witha UP configuration write command, which
1726  * will also complete asynchronously.
1727  *
1728  */
1729 static void slic_link_event_handler(struct adapter *adapter)
1730 {
1731         int status;
1732         struct slic_shmem *pshmem;
1733
1734         if (adapter->state != ADAPT_UP) {
1735                 /* Adapter is not operational.  Ignore.  */
1736                 return;
1737         }
1738
1739         pshmem = (struct slic_shmem *)(unsigned long)adapter->phys_shmem;
1740
1741 #if BITS_PER_LONG == 64
1742         status = slic_upr_request(adapter,
1743                                   SLIC_UPR_RLSR,
1744                                   SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
1745                                   SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
1746                                   0, 0);
1747 #else
1748         status = slic_upr_request(adapter, SLIC_UPR_RLSR,
1749                 (u32) &pshmem->linkstatus,      /* no 4GB wrap guaranteed */
1750                                   0, 0, 0);
1751 #endif
1752 }
1753
1754 static void slic_init_cleanup(struct adapter *adapter)
1755 {
1756         if (adapter->intrregistered) {
1757                 adapter->intrregistered = 0;
1758                 free_irq(adapter->netdev->irq, adapter->netdev);
1759
1760         }
1761         if (adapter->pshmem) {
1762                 pci_free_consistent(adapter->pcidev,
1763                                     sizeof(struct slic_shmem),
1764                                     adapter->pshmem, adapter->phys_shmem);
1765                 adapter->pshmem = NULL;
1766                 adapter->phys_shmem = (dma_addr_t)(unsigned long)NULL;
1767         }
1768
1769         if (adapter->pingtimerset) {
1770                 adapter->pingtimerset = 0;
1771                 del_timer(&adapter->pingtimer);
1772         }
1773
1774         slic_rspqueue_free(adapter);
1775         slic_cmdq_free(adapter);
1776         slic_rcvqueue_free(adapter);
1777 }
1778
1779 /*
1780  *  Allocate a mcast_address structure to hold the multicast address.
1781  *  Link it in.
1782  */
1783 static int slic_mcast_add_list(struct adapter *adapter, char *address)
1784 {
1785         struct mcast_address *mcaddr, *mlist;
1786
1787         /* Check to see if it already exists */
1788         mlist = adapter->mcastaddrs;
1789         while (mlist) {
1790                 if (ether_addr_equal(mlist->address, address))
1791                         return 0;
1792                 mlist = mlist->next;
1793         }
1794
1795         /* Doesn't already exist.  Allocate a structure to hold it */
1796         mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
1797         if (mcaddr == NULL)
1798                 return 1;
1799
1800         ether_addr_copy(mcaddr->address, address);
1801
1802         mcaddr->next = adapter->mcastaddrs;
1803         adapter->mcastaddrs = mcaddr;
1804
1805         return 0;
1806 }
1807
1808 static void slic_mcast_set_list(struct net_device *dev)
1809 {
1810         struct adapter *adapter = netdev_priv(dev);
1811         int status = 0;
1812         char *addresses;
1813         struct netdev_hw_addr *ha;
1814
1815         netdev_for_each_mc_addr(ha, dev) {
1816                 addresses = (char *) &ha->addr;
1817                 status = slic_mcast_add_list(adapter, addresses);
1818                 if (status != 0)
1819                         break;
1820                 slic_mcast_set_bit(adapter, addresses);
1821         }
1822
1823         if (adapter->devflags_prev != dev->flags) {
1824                 adapter->macopts = MAC_DIRECTED;
1825                 if (dev->flags) {
1826                         if (dev->flags & IFF_BROADCAST)
1827                                 adapter->macopts |= MAC_BCAST;
1828                         if (dev->flags & IFF_PROMISC)
1829                                 adapter->macopts |= MAC_PROMISC;
1830                         if (dev->flags & IFF_ALLMULTI)
1831                                 adapter->macopts |= MAC_ALLMCAST;
1832                         if (dev->flags & IFF_MULTICAST)
1833                                 adapter->macopts |= MAC_MCAST;
1834                 }
1835                 adapter->devflags_prev = dev->flags;
1836                 slic_config_set(adapter, true);
1837         } else {
1838                 if (status == 0)
1839                         slic_mcast_set_mask(adapter);
1840         }
1841 }
1842
1843 #define  XMIT_FAIL_LINK_STATE               1
1844 #define  XMIT_FAIL_ZERO_LENGTH              2
1845 #define  XMIT_FAIL_HOSTCMD_FAIL             3
1846
1847 static void slic_xmit_build_request(struct adapter *adapter,
1848                              struct slic_hostcmd *hcmd, struct sk_buff *skb)
1849 {
1850         struct slic_host64_cmd *ihcmd;
1851         ulong phys_addr;
1852
1853         ihcmd = &hcmd->cmd64;
1854
1855         ihcmd->flags = (adapter->port << IHFLG_IFSHFT);
1856         ihcmd->command = IHCMD_XMT_REQ;
1857         ihcmd->u.slic_buffers.totlen = skb->len;
1858         phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
1859                         PCI_DMA_TODEVICE);
1860         ihcmd->u.slic_buffers.bufs[0].paddrl = SLIC_GET_ADDR_LOW(phys_addr);
1861         ihcmd->u.slic_buffers.bufs[0].paddrh = SLIC_GET_ADDR_HIGH(phys_addr);
1862         ihcmd->u.slic_buffers.bufs[0].length = skb->len;
1863 #if BITS_PER_LONG == 64
1864         hcmd->cmdsize = (u32) ((((u64)&ihcmd->u.slic_buffers.bufs[1] -
1865                                      (u64) hcmd) + 31) >> 5);
1866 #else
1867         hcmd->cmdsize = ((((u32) &ihcmd->u.slic_buffers.bufs[1] -
1868                            (u32) hcmd) + 31) >> 5);
1869 #endif
1870 }
1871
1872 static void slic_xmit_fail(struct adapter *adapter,
1873                     struct sk_buff *skb,
1874                     void *cmd, u32 skbtype, u32 status)
1875 {
1876         if (adapter->xmitq_full)
1877                 netif_stop_queue(adapter->netdev);
1878         if ((cmd == NULL) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
1879                 switch (status) {
1880                 case XMIT_FAIL_LINK_STATE:
1881                         dev_err(&adapter->netdev->dev,
1882                                 "reject xmit skb[%p: %x] linkstate[%s] adapter[%s:%d] card[%s:%d]\n",
1883                                 skb, skb->pkt_type,
1884                                 SLIC_LINKSTATE(adapter->linkstate),
1885                                 SLIC_ADAPTER_STATE(adapter->state),
1886                                 adapter->state,
1887                                 SLIC_CARD_STATE(adapter->card->state),
1888                                 adapter->card->state);
1889                         break;
1890                 case XMIT_FAIL_ZERO_LENGTH:
1891                         dev_err(&adapter->netdev->dev,
1892                                 "xmit_start skb->len == 0 skb[%p] type[%x]\n",
1893                                 skb, skb->pkt_type);
1894                         break;
1895                 case XMIT_FAIL_HOSTCMD_FAIL:
1896                         dev_err(&adapter->netdev->dev,
1897                                 "xmit_start skb[%p] type[%x] No host commands available\n",
1898                                 skb, skb->pkt_type);
1899                         break;
1900                 }
1901         }
1902         dev_kfree_skb(skb);
1903         adapter->netdev->stats.tx_dropped++;
1904 }
1905
1906 static void slic_rcv_handle_error(struct adapter *adapter,
1907                                         struct slic_rcvbuf *rcvbuf)
1908 {
1909         struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
1910         struct net_device *netdev = adapter->netdev;
1911
1912         if (adapter->devid != SLIC_1GB_DEVICE_ID) {
1913                 if (hdr->frame_status14 & VRHSTAT_802OE)
1914                         adapter->if_events.oflow802++;
1915                 if (hdr->frame_status14 & VRHSTAT_TPOFLO)
1916                         adapter->if_events.Tprtoflow++;
1917                 if (hdr->frame_status_b14 & VRHSTATB_802UE)
1918                         adapter->if_events.uflow802++;
1919                 if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
1920                         adapter->if_events.rcvearly++;
1921                         netdev->stats.rx_fifo_errors++;
1922                 }
1923                 if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
1924                         adapter->if_events.Bufov++;
1925                         netdev->stats.rx_over_errors++;
1926                 }
1927                 if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
1928                         adapter->if_events.Carre++;
1929                         netdev->stats.tx_carrier_errors++;
1930                 }
1931                 if (hdr->frame_status_b14 & VRHSTATB_LONGE)
1932                         adapter->if_events.Longe++;
1933                 if (hdr->frame_status_b14 & VRHSTATB_PREA)
1934                         adapter->if_events.Invp++;
1935                 if (hdr->frame_status_b14 & VRHSTATB_CRC) {
1936                         adapter->if_events.Crc++;
1937                         netdev->stats.rx_crc_errors++;
1938                 }
1939                 if (hdr->frame_status_b14 & VRHSTATB_DRBL)
1940                         adapter->if_events.Drbl++;
1941                 if (hdr->frame_status_b14 & VRHSTATB_CODE)
1942                         adapter->if_events.Code++;
1943                 if (hdr->frame_status_b14 & VRHSTATB_TPCSUM)
1944                         adapter->if_events.TpCsum++;
1945                 if (hdr->frame_status_b14 & VRHSTATB_TPHLEN)
1946                         adapter->if_events.TpHlen++;
1947                 if (hdr->frame_status_b14 & VRHSTATB_IPCSUM)
1948                         adapter->if_events.IpCsum++;
1949                 if (hdr->frame_status_b14 & VRHSTATB_IPLERR)
1950                         adapter->if_events.IpLen++;
1951                 if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
1952                         adapter->if_events.IpHlen++;
1953         } else {
1954                 if (hdr->frame_statusGB & VGBSTAT_XPERR) {
1955                         u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
1956
1957                         if (xerr == VGBSTAT_XCSERR)
1958                                 adapter->if_events.TpCsum++;
1959                         if (xerr == VGBSTAT_XUFLOW)
1960                                 adapter->if_events.Tprtoflow++;
1961                         if (xerr == VGBSTAT_XHLEN)
1962                                 adapter->if_events.TpHlen++;
1963                 }
1964                 if (hdr->frame_statusGB & VGBSTAT_NETERR) {
1965                         u32 nerr =
1966                             (hdr->
1967                              frame_statusGB >> VGBSTAT_NERRSHFT) &
1968                             VGBSTAT_NERRMSK;
1969                         if (nerr == VGBSTAT_NCSERR)
1970                                 adapter->if_events.IpCsum++;
1971                         if (nerr == VGBSTAT_NUFLOW)
1972                                 adapter->if_events.IpLen++;
1973                         if (nerr == VGBSTAT_NHLEN)
1974                                 adapter->if_events.IpHlen++;
1975                 }
1976                 if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
1977                         u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
1978
1979                         if (lerr == VGBSTAT_LDEARLY)
1980                                 adapter->if_events.rcvearly++;
1981                         if (lerr == VGBSTAT_LBOFLO)
1982                                 adapter->if_events.Bufov++;
1983                         if (lerr == VGBSTAT_LCODERR)
1984                                 adapter->if_events.Code++;
1985                         if (lerr == VGBSTAT_LDBLNBL)
1986                                 adapter->if_events.Drbl++;
1987                         if (lerr == VGBSTAT_LCRCERR)
1988                                 adapter->if_events.Crc++;
1989                         if (lerr == VGBSTAT_LOFLO)
1990                                 adapter->if_events.oflow802++;
1991                         if (lerr == VGBSTAT_LUFLO)
1992                                 adapter->if_events.uflow802++;
1993                 }
1994         }
1995 }
1996
1997 #define TCP_OFFLOAD_FRAME_PUSHFLAG  0x10000000
1998 #define M_FAST_PATH                 0x0040
1999
2000 static void slic_rcv_handler(struct adapter *adapter)
2001 {
2002         struct net_device *netdev = adapter->netdev;
2003         struct sk_buff *skb;
2004         struct slic_rcvbuf *rcvbuf;
2005         u32 frames = 0;
2006
2007         while ((skb = slic_rcvqueue_getnext(adapter))) {
2008                 u32 rx_bytes;
2009
2010                 rcvbuf = (struct slic_rcvbuf *)skb->head;
2011                 adapter->card->events++;
2012                 if (rcvbuf->status & IRHDDR_ERR) {
2013                         adapter->rx_errors++;
2014                         slic_rcv_handle_error(adapter, rcvbuf);
2015                         slic_rcvqueue_reinsert(adapter, skb);
2016                         continue;
2017                 }
2018
2019                 if (!slic_mac_filter(adapter, (struct ether_header *)
2020                                         rcvbuf->data)) {
2021                         slic_rcvqueue_reinsert(adapter, skb);
2022                         continue;
2023                 }
2024                 skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
2025                 rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
2026                 skb_put(skb, rx_bytes);
2027                 netdev->stats.rx_packets++;
2028                 netdev->stats.rx_bytes += rx_bytes;
2029 #if SLIC_OFFLOAD_IP_CHECKSUM
2030                 skb->ip_summed = CHECKSUM_UNNECESSARY;
2031 #endif
2032
2033                 skb->dev = adapter->netdev;
2034                 skb->protocol = eth_type_trans(skb, skb->dev);
2035                 netif_rx(skb);
2036
2037                 ++frames;
2038 #if SLIC_INTERRUPT_PROCESS_LIMIT
2039                 if (frames >= SLIC_RCVQ_MAX_PROCESS_ISR) {
2040                         adapter->rcv_interrupt_yields++;
2041                         break;
2042                 }
2043 #endif
2044         }
2045         adapter->max_isr_rcvs = max(adapter->max_isr_rcvs, frames);
2046 }
2047
2048 static void slic_xmit_complete(struct adapter *adapter)
2049 {
2050         struct slic_hostcmd *hcmd;
2051         struct slic_rspbuf *rspbuf;
2052         u32 frames = 0;
2053         struct slic_handle_word slic_handle_word;
2054
2055         do {
2056                 rspbuf = slic_rspqueue_getnext(adapter);
2057                 if (!rspbuf)
2058                         break;
2059                 adapter->xmit_completes++;
2060                 adapter->card->events++;
2061                 /*
2062                  Get the complete host command buffer
2063                 */
2064                 slic_handle_word.handle_token = rspbuf->hosthandle;
2065                 hcmd =
2066                     (struct slic_hostcmd *)
2067                         adapter->slic_handles[slic_handle_word.handle_index].
2068                                                                         address;
2069 /*      hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
2070                 if (hcmd->type == SLIC_CMD_DUMB) {
2071                         if (hcmd->skb)
2072                                 dev_kfree_skb_irq(hcmd->skb);
2073                         slic_cmdq_putdone_irq(adapter, hcmd);
2074                 }
2075                 rspbuf->status = 0;
2076                 rspbuf->hosthandle = 0;
2077                 frames++;
2078         } while (1);
2079         adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
2080 }
2081
2082 static void slic_interrupt_card_up(u32 isr, struct adapter *adapter,
2083                         struct net_device *dev)
2084 {
2085         if (isr & ~ISR_IO) {
2086                 if (isr & ISR_ERR) {
2087                         adapter->error_interrupts++;
2088                         if (isr & ISR_RMISS) {
2089                                 int count;
2090                                 int pre_count;
2091                                 int errors;
2092
2093                                 struct slic_rcvqueue *rcvq =
2094                                         &adapter->rcvqueue;
2095
2096                                 adapter->error_rmiss_interrupts++;
2097
2098                                 if (!rcvq->errors)
2099                                         rcv_count = rcvq->count;
2100                                 pre_count = rcvq->count;
2101                                 errors = rcvq->errors;
2102
2103                                 while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
2104                                         count = slic_rcvqueue_fill(adapter);
2105                                         if (!count)
2106                                                 break;
2107                                 }
2108                         } else if (isr & ISR_XDROP) {
2109                                 dev_err(&dev->dev,
2110                                                 "isr & ISR_ERR [%x] ISR_XDROP\n",
2111                                                 isr);
2112                         } else {
2113                                 dev_err(&dev->dev,
2114                                                 "isr & ISR_ERR [%x]\n",
2115                                                 isr);
2116                         }
2117                 }
2118
2119                 if (isr & ISR_LEVENT) {
2120                         adapter->linkevent_interrupts++;
2121                         slic_link_event_handler(adapter);
2122                 }
2123
2124                 if ((isr & ISR_UPC) || (isr & ISR_UPCERR) ||
2125                     (isr & ISR_UPCBSY)) {
2126                         adapter->upr_interrupts++;
2127                         slic_upr_request_complete(adapter, isr);
2128                 }
2129         }
2130
2131         if (isr & ISR_RCV) {
2132                 adapter->rcv_interrupts++;
2133                 slic_rcv_handler(adapter);
2134         }
2135
2136         if (isr & ISR_CMD) {
2137                 adapter->xmit_interrupts++;
2138                 slic_xmit_complete(adapter);
2139         }
2140 }
2141
2142
2143 static irqreturn_t slic_interrupt(int irq, void *dev_id)
2144 {
2145         struct net_device *dev = (struct net_device *)dev_id;
2146         struct adapter *adapter = netdev_priv(dev);
2147         u32 isr;
2148
2149         if ((adapter->pshmem) && (adapter->pshmem->isr)) {
2150                 slic_reg32_write(&adapter->slic_regs->slic_icr,
2151                                  ICR_INT_MASK, FLUSH);
2152                 isr = adapter->isrcopy = adapter->pshmem->isr;
2153                 adapter->pshmem->isr = 0;
2154                 adapter->num_isrs++;
2155                 switch (adapter->card->state) {
2156                 case CARD_UP:
2157                         slic_interrupt_card_up(isr, adapter, dev);
2158                         break;
2159
2160                 case CARD_DOWN:
2161                         if ((isr & ISR_UPC) ||
2162                             (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
2163                                 adapter->upr_interrupts++;
2164                                 slic_upr_request_complete(adapter, isr);
2165                         }
2166                         break;
2167                 }
2168
2169                 adapter->isrcopy = 0;
2170                 adapter->all_reg_writes += 2;
2171                 adapter->isr_reg_writes++;
2172                 slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
2173         } else {
2174                 adapter->false_interrupts++;
2175         }
2176         return IRQ_HANDLED;
2177 }
2178
2179 #define NORMAL_ETHFRAME     0
2180
2181 static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
2182 {
2183         struct sliccard *card;
2184         struct adapter *adapter = netdev_priv(dev);
2185         struct slic_hostcmd *hcmd = NULL;
2186         u32 status = 0;
2187         void *offloadcmd = NULL;
2188
2189         card = adapter->card;
2190         if ((adapter->linkstate != LINK_UP) ||
2191             (adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
2192                 status = XMIT_FAIL_LINK_STATE;
2193                 goto xmit_fail;
2194
2195         } else if (skb->len == 0) {
2196                 status = XMIT_FAIL_ZERO_LENGTH;
2197                 goto xmit_fail;
2198         }
2199
2200         hcmd = slic_cmdq_getfree(adapter);
2201         if (!hcmd) {
2202                 adapter->xmitq_full = 1;
2203                 status = XMIT_FAIL_HOSTCMD_FAIL;
2204                 goto xmit_fail;
2205         }
2206         hcmd->skb = skb;
2207         hcmd->busy = 1;
2208         hcmd->type = SLIC_CMD_DUMB;
2209         slic_xmit_build_request(adapter, hcmd, skb);
2210         dev->stats.tx_packets++;
2211         dev->stats.tx_bytes += skb->len;
2212
2213 #ifdef DEBUG_DUMP
2214         if (adapter->kill_card) {
2215                 struct slic_host64_cmd ihcmd;
2216
2217                 ihcmd = &hcmd->cmd64;
2218
2219                 ihcmd->flags |= 0x40;
2220                 adapter->kill_card = 0; /* only do this once */
2221         }
2222 #endif
2223         if (hcmd->paddrh == 0) {
2224                 slic_reg32_write(&adapter->slic_regs->slic_cbar,
2225                                  (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
2226         } else {
2227                 slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
2228                                  (hcmd->paddrl | hcmd->cmdsize),
2229                                  &adapter->slic_regs->slic_addr_upper,
2230                                  hcmd->paddrh, DONT_FLUSH);
2231         }
2232 xmit_done:
2233         return NETDEV_TX_OK;
2234 xmit_fail:
2235         slic_xmit_fail(adapter, skb, offloadcmd, NORMAL_ETHFRAME, status);
2236         goto xmit_done;
2237 }
2238
2239
2240 static void slic_adapter_freeresources(struct adapter *adapter)
2241 {
2242         slic_init_cleanup(adapter);
2243         adapter->error_interrupts = 0;
2244         adapter->rcv_interrupts = 0;
2245         adapter->xmit_interrupts = 0;
2246         adapter->linkevent_interrupts = 0;
2247         adapter->upr_interrupts = 0;
2248         adapter->num_isrs = 0;
2249         adapter->xmit_completes = 0;
2250         adapter->rcv_broadcasts = 0;
2251         adapter->rcv_multicasts = 0;
2252         adapter->rcv_unicasts = 0;
2253 }
2254
2255 static int slic_adapter_allocresources(struct adapter *adapter)
2256 {
2257         if (!adapter->intrregistered) {
2258                 int retval;
2259
2260                 spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2261                                         slic_global.driver_lock.flags);
2262
2263                 retval = request_irq(adapter->netdev->irq,
2264                                      &slic_interrupt,
2265                                      IRQF_SHARED,
2266                                      adapter->netdev->name, adapter->netdev);
2267
2268                 spin_lock_irqsave(&slic_global.driver_lock.lock,
2269                                         slic_global.driver_lock.flags);
2270
2271                 if (retval) {
2272                         dev_err(&adapter->netdev->dev,
2273                                 "request_irq (%s) FAILED [%x]\n",
2274                                 adapter->netdev->name, retval);
2275                         return retval;
2276                 }
2277                 adapter->intrregistered = 1;
2278         }
2279         return 0;
2280 }
2281
2282 /*
2283  *  slic_if_init
2284  *
2285  *  Perform initialization of our slic interface.
2286  *
2287  */
2288 static int slic_if_init(struct adapter *adapter)
2289 {
2290         struct sliccard *card = adapter->card;
2291         struct net_device *dev = adapter->netdev;
2292         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2293         struct slic_shmem *pshmem;
2294         int rc;
2295
2296         /* adapter should be down at this point */
2297         if (adapter->state != ADAPT_DOWN) {
2298                 dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
2299                         __func__);
2300                 rc = -EIO;
2301                 goto err;
2302         }
2303
2304         adapter->devflags_prev = dev->flags;
2305         adapter->macopts = MAC_DIRECTED;
2306         if (dev->flags) {
2307                 if (dev->flags & IFF_BROADCAST)
2308                         adapter->macopts |= MAC_BCAST;
2309                 if (dev->flags & IFF_PROMISC)
2310                         adapter->macopts |= MAC_PROMISC;
2311                 if (dev->flags & IFF_ALLMULTI)
2312                         adapter->macopts |= MAC_ALLMCAST;
2313                 if (dev->flags & IFF_MULTICAST)
2314                         adapter->macopts |= MAC_MCAST;
2315         }
2316         rc = slic_adapter_allocresources(adapter);
2317         if (rc) {
2318                 dev_err(&dev->dev,
2319                         "%s: slic_adapter_allocresources FAILED %x\n",
2320                         __func__, rc);
2321                 slic_adapter_freeresources(adapter);
2322                 goto err;
2323         }
2324
2325         if (!adapter->queues_initialized) {
2326                 rc = slic_rspqueue_init(adapter);
2327                 if (rc)
2328                         goto err;
2329                 rc = slic_cmdq_init(adapter);
2330                 if (rc)
2331                         goto err;
2332                 rc = slic_rcvqueue_init(adapter);
2333                 if (rc)
2334                         goto err;
2335                 adapter->queues_initialized = 1;
2336         }
2337
2338         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2339         mdelay(1);
2340
2341         if (!adapter->isp_initialized) {
2342                 pshmem = (struct slic_shmem *)(unsigned long)
2343                          adapter->phys_shmem;
2344
2345                 spin_lock_irqsave(&adapter->bit64reglock.lock,
2346                                         adapter->bit64reglock.flags);
2347
2348 #if BITS_PER_LONG == 64
2349                 slic_reg32_write(&slic_regs->slic_addr_upper,
2350                                  SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
2351                 slic_reg32_write(&slic_regs->slic_isp,
2352                                  SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
2353 #else
2354                 slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
2355                 slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr,
2356                                 FLUSH);
2357 #endif
2358                 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
2359                                         adapter->bit64reglock.flags);
2360                 adapter->isp_initialized = 1;
2361         }
2362
2363         adapter->state = ADAPT_UP;
2364         if (!card->loadtimerset) {
2365                 init_timer(&card->loadtimer);
2366                 card->loadtimer.expires =
2367                     jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
2368                 card->loadtimer.data = (ulong) card;
2369                 card->loadtimer.function = &slic_timer_load_check;
2370                 add_timer(&card->loadtimer);
2371
2372                 card->loadtimerset = 1;
2373         }
2374
2375         if (!adapter->pingtimerset) {
2376                 init_timer(&adapter->pingtimer);
2377                 adapter->pingtimer.expires =
2378                     jiffies + (PING_TIMER_INTERVAL * HZ);
2379                 adapter->pingtimer.data = (ulong) dev;
2380                 adapter->pingtimer.function = &slic_timer_ping;
2381                 add_timer(&adapter->pingtimer);
2382                 adapter->pingtimerset = 1;
2383                 adapter->card->pingstatus = ISR_PINGMASK;
2384         }
2385
2386         /*
2387          *    clear any pending events, then enable interrupts
2388          */
2389         adapter->isrcopy = 0;
2390         adapter->pshmem->isr = 0;
2391         slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
2392         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
2393
2394         slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
2395         slic_link_event_handler(adapter);
2396
2397 err:
2398         return rc;
2399 }
2400
2401 static int slic_entry_open(struct net_device *dev)
2402 {
2403         struct adapter *adapter = netdev_priv(dev);
2404         struct sliccard *card = adapter->card;
2405         int status;
2406
2407         netif_stop_queue(adapter->netdev);
2408
2409         spin_lock_irqsave(&slic_global.driver_lock.lock,
2410                                 slic_global.driver_lock.flags);
2411         if (!adapter->activated) {
2412                 card->adapters_activated++;
2413                 slic_global.num_slic_ports_active++;
2414                 adapter->activated = 1;
2415         }
2416         status = slic_if_init(adapter);
2417
2418         if (status != 0) {
2419                 if (adapter->activated) {
2420                         card->adapters_activated--;
2421                         slic_global.num_slic_ports_active--;
2422                         adapter->activated = 0;
2423                 }
2424                 goto spin_unlock;
2425         }
2426         if (!card->master)
2427                 card->master = adapter;
2428
2429 spin_unlock:
2430         spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2431                                slic_global.driver_lock.flags);
2432         return status;
2433 }
2434
2435 static void slic_card_cleanup(struct sliccard *card)
2436 {
2437         if (card->loadtimerset) {
2438                 card->loadtimerset = 0;
2439                 del_timer_sync(&card->loadtimer);
2440         }
2441
2442         kfree(card);
2443 }
2444
2445 static void slic_entry_remove(struct pci_dev *pcidev)
2446 {
2447         struct net_device *dev = pci_get_drvdata(pcidev);
2448         struct adapter *adapter = netdev_priv(dev);
2449         struct sliccard *card;
2450         struct mcast_address *mcaddr, *mlist;
2451
2452         unregister_netdev(dev);
2453
2454         slic_adapter_freeresources(adapter);
2455         slic_unmap_mmio_space(adapter);
2456
2457         /* free multicast addresses */
2458         mlist = adapter->mcastaddrs;
2459         while (mlist) {
2460                 mcaddr = mlist;
2461                 mlist = mlist->next;
2462                 kfree(mcaddr);
2463         }
2464         card = adapter->card;
2465         card->adapters_allocated--;
2466         adapter->allocated = 0;
2467         if (!card->adapters_allocated) {
2468                 struct sliccard *curr_card = slic_global.slic_card;
2469
2470                 if (curr_card == card) {
2471                         slic_global.slic_card = card->next;
2472                 } else {
2473                         while (curr_card->next != card)
2474                                 curr_card = curr_card->next;
2475                         curr_card->next = card->next;
2476                 }
2477                 slic_global.num_slic_cards--;
2478                 slic_card_cleanup(card);
2479         }
2480         free_netdev(dev);
2481         pci_release_regions(pcidev);
2482         pci_disable_device(pcidev);
2483 }
2484
2485 static int slic_entry_halt(struct net_device *dev)
2486 {
2487         struct adapter *adapter = netdev_priv(dev);
2488         struct sliccard *card = adapter->card;
2489         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2490
2491         spin_lock_irqsave(&slic_global.driver_lock.lock,
2492                                 slic_global.driver_lock.flags);
2493         netif_stop_queue(adapter->netdev);
2494         adapter->state = ADAPT_DOWN;
2495         adapter->linkstate = LINK_DOWN;
2496         adapter->upr_list = NULL;
2497         adapter->upr_busy = 0;
2498         adapter->devflags_prev = 0;
2499         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2500         adapter->all_reg_writes++;
2501         adapter->icr_reg_writes++;
2502         slic_config_clear(adapter);
2503         if (adapter->activated) {
2504                 card->adapters_activated--;
2505                 slic_global.num_slic_ports_active--;
2506                 adapter->activated = 0;
2507         }
2508 #ifdef AUTOMATIC_RESET
2509         slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
2510 #endif
2511         /*
2512          *  Reset the adapter's cmd queues
2513          */
2514         slic_cmdq_reset(adapter);
2515
2516 #ifdef AUTOMATIC_RESET
2517         if (!card->adapters_activated)
2518                 slic_card_init(card, adapter);
2519 #endif
2520
2521         spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2522                                 slic_global.driver_lock.flags);
2523         return 0;
2524 }
2525
2526 static struct net_device_stats *slic_get_stats(struct net_device *dev)
2527 {
2528         struct adapter *adapter = netdev_priv(dev);
2529
2530         dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
2531         dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
2532         dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
2533         dev->stats.rx_missed_errors = adapter->slic_stats.iface.rcv_discards;
2534         dev->stats.tx_heartbeat_errors = 0;
2535         dev->stats.tx_aborted_errors = 0;
2536         dev->stats.tx_window_errors = 0;
2537         dev->stats.tx_fifo_errors = 0;
2538         dev->stats.rx_frame_errors = 0;
2539         dev->stats.rx_length_errors = 0;
2540
2541         return &dev->stats;
2542 }
2543
2544 static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2545 {
2546         struct adapter *adapter = netdev_priv(dev);
2547         struct ethtool_cmd edata;
2548         struct ethtool_cmd ecmd;
2549         u32 data[7];
2550         u32 intagg;
2551
2552         switch (cmd) {
2553         case SIOCSLICSETINTAGG:
2554                 if (copy_from_user(data, rq->ifr_data, 28))
2555                         return -EFAULT;
2556                 intagg = data[0];
2557                 dev_err(&dev->dev, "%s: set interrupt aggregation to %d\n",
2558                         __func__, intagg);
2559                 slic_intagg_set(adapter, intagg);
2560                 return 0;
2561
2562 #ifdef SLIC_TRACE_DUMP_ENABLED
2563         case SIOCSLICTRACEDUMP:
2564                 {
2565                         u32 value;
2566
2567                         DBG_IOCTL("slic_ioctl  SIOCSLIC_TRACE_DUMP\n");
2568
2569                         if (copy_from_user(data, rq->ifr_data, 28)) {
2570                                 PRINT_ERROR
2571                                     ("slic: copy_from_user FAILED getting initial simba param\n");
2572                                 return -EFAULT;
2573                         }
2574
2575                         value = data[0];
2576                         if (tracemon_request == SLIC_DUMP_DONE) {
2577                                 PRINT_ERROR
2578                                     ("ATK Diagnostic Trace Dump Requested\n");
2579                                 tracemon_request = SLIC_DUMP_REQUESTED;
2580                                 tracemon_request_type = value;
2581                                 tracemon_timestamp = jiffies;
2582                         } else if ((tracemon_request == SLIC_DUMP_REQUESTED) ||
2583                                    (tracemon_request ==
2584                                     SLIC_DUMP_IN_PROGRESS)) {
2585                                 PRINT_ERROR
2586                                     ("ATK Diagnostic Trace Dump Requested but already in progress... ignore\n");
2587                         } else {
2588                                 PRINT_ERROR
2589                                     ("ATK Diagnostic Trace Dump Requested\n");
2590                                 tracemon_request = SLIC_DUMP_REQUESTED;
2591                                 tracemon_request_type = value;
2592                                 tracemon_timestamp = jiffies;
2593                         }
2594                         return 0;
2595                 }
2596 #endif
2597         case SIOCETHTOOL:
2598                 if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
2599                         return -EFAULT;
2600
2601                 if (ecmd.cmd == ETHTOOL_GSET) {
2602                         memset(&edata, 0, sizeof(edata));
2603                         edata.supported = (SUPPORTED_10baseT_Half |
2604                                            SUPPORTED_10baseT_Full |
2605                                            SUPPORTED_100baseT_Half |
2606                                            SUPPORTED_100baseT_Full |
2607                                            SUPPORTED_Autoneg | SUPPORTED_MII);
2608                         edata.port = PORT_MII;
2609                         edata.transceiver = XCVR_INTERNAL;
2610                         edata.phy_address = 0;
2611                         if (adapter->linkspeed == LINK_100MB)
2612                                 edata.speed = SPEED_100;
2613                         else if (adapter->linkspeed == LINK_10MB)
2614                                 edata.speed = SPEED_10;
2615                         else
2616                                 edata.speed = 0;
2617
2618                         if (adapter->linkduplex == LINK_FULLD)
2619                                 edata.duplex = DUPLEX_FULL;
2620                         else
2621                                 edata.duplex = DUPLEX_HALF;
2622
2623                         edata.autoneg = AUTONEG_ENABLE;
2624                         edata.maxtxpkt = 1;
2625                         edata.maxrxpkt = 1;
2626                         if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
2627                                 return -EFAULT;
2628
2629                 } else if (ecmd.cmd == ETHTOOL_SSET) {
2630                         if (!capable(CAP_NET_ADMIN))
2631                                 return -EPERM;
2632
2633                         if (adapter->linkspeed == LINK_100MB)
2634                                 edata.speed = SPEED_100;
2635                         else if (adapter->linkspeed == LINK_10MB)
2636                                 edata.speed = SPEED_10;
2637                         else
2638                                 edata.speed = 0;
2639
2640                         if (adapter->linkduplex == LINK_FULLD)
2641                                 edata.duplex = DUPLEX_FULL;
2642                         else
2643                                 edata.duplex = DUPLEX_HALF;
2644
2645                         edata.autoneg = AUTONEG_ENABLE;
2646                         edata.maxtxpkt = 1;
2647                         edata.maxrxpkt = 1;
2648                         if ((ecmd.speed != edata.speed) ||
2649                             (ecmd.duplex != edata.duplex)) {
2650                                 u32 speed;
2651                                 u32 duplex;
2652
2653                                 if (ecmd.speed == SPEED_10)
2654                                         speed = 0;
2655                                 else
2656                                         speed = PCR_SPEED_100;
2657                                 if (ecmd.duplex == DUPLEX_FULL)
2658                                         duplex = PCR_DUPLEX_FULL;
2659                                 else
2660                                         duplex = 0;
2661                                 slic_link_config(adapter, speed, duplex);
2662                                 slic_link_event_handler(adapter);
2663                         }
2664                 }
2665                 return 0;
2666         default:
2667                 return -EOPNOTSUPP;
2668         }
2669 }
2670
2671 static void slic_config_pci(struct pci_dev *pcidev)
2672 {
2673         u16 pci_command;
2674         u16 new_command;
2675
2676         pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
2677
2678         new_command = pci_command | PCI_COMMAND_MASTER
2679             | PCI_COMMAND_MEMORY
2680             | PCI_COMMAND_INVALIDATE
2681             | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
2682         if (pci_command != new_command)
2683                 pci_write_config_word(pcidev, PCI_COMMAND, new_command);
2684 }
2685
2686 static int slic_card_init(struct sliccard *card, struct adapter *adapter)
2687 {
2688         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2689         struct slic_eeprom *peeprom;
2690         struct oslic_eeprom *pOeeprom;
2691         dma_addr_t phys_config;
2692         u32 phys_configh;
2693         u32 phys_configl;
2694         u32 i = 0;
2695         struct slic_shmem *pshmem;
2696         int status;
2697         uint macaddrs = card->card_size;
2698         ushort eecodesize;
2699         ushort dramsize;
2700         ushort ee_chksum;
2701         ushort calc_chksum;
2702         struct slic_config_mac *pmac;
2703         unsigned char fruformat;
2704         unsigned char oemfruformat;
2705         struct atk_fru *patkfru;
2706         union oemfru *poemfru;
2707
2708         /* Reset everything except PCI configuration space */
2709         slic_soft_reset(adapter);
2710
2711         /* Download the microcode */
2712         status = slic_card_download(adapter);
2713         if (status)
2714                 return status;
2715
2716         if (!card->config_set) {
2717                 peeprom = pci_alloc_consistent(adapter->pcidev,
2718                                                sizeof(struct slic_eeprom),
2719                                                &phys_config);
2720
2721                 phys_configl = SLIC_GET_ADDR_LOW(phys_config);
2722                 phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
2723
2724                 if (!peeprom) {
2725                         dev_err(&adapter->pcidev->dev,
2726                                 "Failed to allocate DMA memory for EEPROM.\n");
2727                         return -ENOMEM;
2728                 }
2729
2730                 memset(peeprom, 0, sizeof(struct slic_eeprom));
2731
2732                 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2733                 mdelay(1);
2734                 pshmem = (struct slic_shmem *)(unsigned long)
2735                          adapter->phys_shmem;
2736
2737                 spin_lock_irqsave(&adapter->bit64reglock.lock,
2738                                         adapter->bit64reglock.flags);
2739                 slic_reg32_write(&slic_regs->slic_addr_upper,
2740                                  SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
2741                 slic_reg32_write(&slic_regs->slic_isp,
2742                                  SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
2743                 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
2744                                         adapter->bit64reglock.flags);
2745
2746                 status = slic_config_get(adapter, phys_configl, phys_configh);
2747                 if (status) {
2748                         dev_err(&adapter->pcidev->dev,
2749                                 "Failed to fetch config data from device.\n");
2750                         goto card_init_err;
2751                 }
2752
2753                 for (;;) {
2754                         if (adapter->pshmem->isr) {
2755                                 if (adapter->pshmem->isr & ISR_UPC) {
2756                                         adapter->pshmem->isr = 0;
2757                                         slic_reg64_write(adapter,
2758                                                 &slic_regs->slic_isp, 0,
2759                                                 &slic_regs->slic_addr_upper,
2760                                                 0, FLUSH);
2761                                         slic_reg32_write(&slic_regs->slic_isr,
2762                                                          0, FLUSH);
2763
2764                                         slic_upr_request_complete(adapter, 0);
2765                                         break;
2766                                 }
2767
2768                                 adapter->pshmem->isr = 0;
2769                                 slic_reg32_write(&slic_regs->slic_isr,
2770                                                  0, FLUSH);
2771                         } else {
2772                                 mdelay(1);
2773                                 i++;
2774                                 if (i > 5000) {
2775                                         dev_err(&adapter->pcidev->dev,
2776                                                 "Fetch of config data timed out.\n");
2777                                         slic_reg64_write(adapter,
2778                                                 &slic_regs->slic_isp, 0,
2779                                                 &slic_regs->slic_addr_upper,
2780                                                 0, FLUSH);
2781                                         status = -EINVAL;
2782                                         goto card_init_err;
2783                                 }
2784                         }
2785                 }
2786
2787                 switch (adapter->devid) {
2788                 /* Oasis card */
2789                 case SLIC_2GB_DEVICE_ID:
2790                         /* extract EEPROM data and pointers to EEPROM data */
2791                         pOeeprom = (struct oslic_eeprom *) peeprom;
2792                         eecodesize = pOeeprom->EecodeSize;
2793                         dramsize = pOeeprom->DramSize;
2794                         pmac = pOeeprom->MacInfo;
2795                         fruformat = pOeeprom->FruFormat;
2796                         patkfru = &pOeeprom->AtkFru;
2797                         oemfruformat = pOeeprom->OemFruFormat;
2798                         poemfru = &pOeeprom->OemFru;
2799                         macaddrs = 2;
2800                         /* Minor kludge for Oasis card
2801                              get 2 MAC addresses from the
2802                              EEPROM to ensure that function 1
2803                              gets the Port 1 MAC address */
2804                         break;
2805                 default:
2806                         /* extract EEPROM data and pointers to EEPROM data */
2807                         eecodesize = peeprom->EecodeSize;
2808                         dramsize = peeprom->DramSize;
2809                         pmac = peeprom->u2.mac.MacInfo;
2810                         fruformat = peeprom->FruFormat;
2811                         patkfru = &peeprom->AtkFru;
2812                         oemfruformat = peeprom->OemFruFormat;
2813                         poemfru = &peeprom->OemFru;
2814                         break;
2815                 }
2816
2817                 card->config.EepromValid = false;
2818
2819                 /*  see if the EEPROM is valid by checking it's checksum */
2820                 if ((eecodesize <= MAX_EECODE_SIZE) &&
2821                     (eecodesize >= MIN_EECODE_SIZE)) {
2822
2823                         ee_chksum =
2824                             *(u16 *) ((char *) peeprom + (eecodesize - 2));
2825                         /*
2826                             calculate the EEPROM checksum
2827                         */
2828                         calc_chksum = slic_eeprom_cksum(peeprom,
2829                                                         eecodesize - 2);
2830                         /*
2831                             if the ucdoe chksum flag bit worked,
2832                             we wouldn't need this
2833                         */
2834                         if (ee_chksum == calc_chksum)
2835                                 card->config.EepromValid = true;
2836                 }
2837                 /*  copy in the DRAM size */
2838                 card->config.DramSize = dramsize;
2839
2840                 /*  copy in the MAC address(es) */
2841                 for (i = 0; i < macaddrs; i++) {
2842                         memcpy(&card->config.MacInfo[i],
2843                                &pmac[i], sizeof(struct slic_config_mac));
2844                 }
2845
2846                 /*  copy the Alacritech FRU information */
2847                 card->config.FruFormat = fruformat;
2848                 memcpy(&card->config.AtkFru, patkfru,
2849                                                 sizeof(struct atk_fru));
2850
2851                 pci_free_consistent(adapter->pcidev,
2852                                     sizeof(struct slic_eeprom),
2853                                     peeprom, phys_config);
2854
2855                 if (!card->config.EepromValid) {
2856                         slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
2857                                          &slic_regs->slic_addr_upper,
2858                                          0, FLUSH);
2859                         dev_err(&adapter->pcidev->dev, "EEPROM invalid.\n");
2860                         return -EINVAL;
2861                 }
2862
2863                 card->config_set = 1;
2864         }
2865
2866         status = slic_card_download_gbrcv(adapter);
2867         if (status)
2868                 return status;
2869
2870         if (slic_global.dynamic_intagg)
2871                 slic_intagg_set(adapter, 0);
2872         else
2873                 slic_intagg_set(adapter, intagg_delay);
2874
2875         /*
2876          *  Initialize ping status to "ok"
2877          */
2878         card->pingstatus = ISR_PINGMASK;
2879
2880         /*
2881          * Lastly, mark our card state as up and return success
2882          */
2883         card->state = CARD_UP;
2884         card->reset_in_progress = 0;
2885
2886         return 0;
2887
2888 card_init_err:
2889         pci_free_consistent(adapter->pcidev, sizeof(struct slic_eeprom),
2890                             peeprom, phys_config);
2891         return status;
2892 }
2893
2894 static void slic_init_driver(void)
2895 {
2896         if (slic_first_init) {
2897                 slic_first_init = 0;
2898                 spin_lock_init(&slic_global.driver_lock.lock);
2899         }
2900 }
2901
2902 static void slic_init_adapter(struct net_device *netdev,
2903                               struct pci_dev *pcidev,
2904                               const struct pci_device_id *pci_tbl_entry,
2905                               void __iomem *memaddr, int chip_idx)
2906 {
2907         ushort index;
2908         struct slic_handle *pslic_handle;
2909         struct adapter *adapter = netdev_priv(netdev);
2910
2911 /*      adapter->pcidev = pcidev;*/
2912         adapter->vendid = pci_tbl_entry->vendor;
2913         adapter->devid = pci_tbl_entry->device;
2914         adapter->subsysid = pci_tbl_entry->subdevice;
2915         adapter->busnumber = pcidev->bus->number;
2916         adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
2917         adapter->functionnumber = (pcidev->devfn & 0x7);
2918         adapter->slic_regs = (__iomem struct slic_regs *)memaddr;
2919         adapter->irq = pcidev->irq;
2920 /*      adapter->netdev = netdev;*/
2921         adapter->chipid = chip_idx;
2922         adapter->port = 0;      /*adapter->functionnumber;*/
2923         adapter->cardindex = adapter->port;
2924         spin_lock_init(&adapter->upr_lock.lock);
2925         spin_lock_init(&adapter->bit64reglock.lock);
2926         spin_lock_init(&adapter->adapter_lock.lock);
2927         spin_lock_init(&adapter->reset_lock.lock);
2928         spin_lock_init(&adapter->handle_lock.lock);
2929
2930         adapter->card_size = 1;
2931         /*
2932           Initialize slic_handle array
2933         */
2934         /*
2935          Start with 1.  0 is an invalid host handle.
2936         */
2937         for (index = 1, pslic_handle = &adapter->slic_handles[1];
2938              index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
2939
2940                 pslic_handle->token.handle_index = index;
2941                 pslic_handle->type = SLIC_HANDLE_FREE;
2942                 pslic_handle->next = adapter->pfree_slic_handles;
2943                 adapter->pfree_slic_handles = pslic_handle;
2944         }
2945         adapter->pshmem = (struct slic_shmem *)
2946                                         pci_alloc_consistent(adapter->pcidev,
2947                                         sizeof(struct slic_shmem),
2948                                         &adapter->
2949                                         phys_shmem);
2950         if (adapter->pshmem)
2951                 memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
2952 }
2953
2954 static const struct net_device_ops slic_netdev_ops = {
2955         .ndo_open               = slic_entry_open,
2956         .ndo_stop               = slic_entry_halt,
2957         .ndo_start_xmit         = slic_xmit_start,
2958         .ndo_do_ioctl           = slic_ioctl,
2959         .ndo_set_mac_address    = slic_mac_set_address,
2960         .ndo_get_stats          = slic_get_stats,
2961         .ndo_set_rx_mode        = slic_mcast_set_list,
2962         .ndo_validate_addr      = eth_validate_addr,
2963         .ndo_change_mtu         = eth_change_mtu,
2964 };
2965
2966 static u32 slic_card_locate(struct adapter *adapter)
2967 {
2968         struct sliccard *card = slic_global.slic_card;
2969         struct physcard *physcard = slic_global.phys_card;
2970         ushort card_hostid;
2971         u16 __iomem *hostid_reg;
2972         uint i;
2973         uint rdhostid_offset = 0;
2974
2975         switch (adapter->devid) {
2976         case SLIC_2GB_DEVICE_ID:
2977                 rdhostid_offset = SLIC_RDHOSTID_2GB;
2978                 break;
2979         case SLIC_1GB_DEVICE_ID:
2980                 rdhostid_offset = SLIC_RDHOSTID_1GB;
2981                 break;
2982         default:
2983                 return -ENODEV;
2984         }
2985
2986         hostid_reg =
2987             (u16 __iomem *) (((u8 __iomem *) (adapter->slic_regs)) +
2988             rdhostid_offset);
2989
2990         /* read the 16 bit hostid from SRAM */
2991         card_hostid = (ushort) readw(hostid_reg);
2992
2993         /* Initialize a new card structure if need be */
2994         if (card_hostid == SLIC_HOSTID_DEFAULT) {
2995                 card = kzalloc(sizeof(struct sliccard), GFP_KERNEL);
2996                 if (card == NULL)
2997                         return -ENOMEM;
2998
2999                 card->next = slic_global.slic_card;
3000                 slic_global.slic_card = card;
3001                 card->busnumber = adapter->busnumber;
3002                 card->slotnumber = adapter->slotnumber;
3003
3004                 /* Find an available cardnum */
3005                 for (i = 0; i < SLIC_MAX_CARDS; i++) {
3006                         if (slic_global.cardnuminuse[i] == 0) {
3007                                 slic_global.cardnuminuse[i] = 1;
3008                                 card->cardnum = i;
3009                                 break;
3010                         }
3011                 }
3012                 slic_global.num_slic_cards++;
3013         } else {
3014                 /* Card exists, find the card this adapter belongs to */
3015                 while (card) {
3016                         if (card->cardnum == card_hostid)
3017                                 break;
3018                         card = card->next;
3019                 }
3020         }
3021
3022         if (!card)
3023                 return -ENXIO;
3024         /* Put the adapter in the card's adapter list */
3025         if (!card->adapter[adapter->port]) {
3026                 card->adapter[adapter->port] = adapter;
3027                 adapter->card = card;
3028         }
3029
3030         card->card_size = 1;    /* one port per *logical* card */
3031
3032         while (physcard) {
3033                 for (i = 0; i < SLIC_MAX_PORTS; i++) {
3034                         if (physcard->adapter[i])
3035                                 break;
3036                 }
3037                 if (i == SLIC_MAX_PORTS)
3038                         break;
3039
3040                 if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
3041                         break;
3042                 physcard = physcard->next;
3043         }
3044         if (!physcard) {
3045                 /* no structure allocated for this physical card yet */
3046                 physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
3047                 if (!physcard) {
3048                         if (card_hostid == SLIC_HOSTID_DEFAULT)
3049                                 kfree(card);
3050                         return -ENOMEM;
3051                 }
3052
3053                 physcard->next = slic_global.phys_card;
3054                 slic_global.phys_card = physcard;
3055                 physcard->adapters_allocd = 1;
3056         } else {
3057                 physcard->adapters_allocd++;
3058         }
3059         /* Note - this is ZERO relative */
3060         adapter->physport = physcard->adapters_allocd - 1;
3061
3062         physcard->adapter[adapter->physport] = adapter;
3063         adapter->physcard = physcard;
3064
3065         return 0;
3066 }
3067
3068 static int slic_entry_probe(struct pci_dev *pcidev,
3069                                const struct pci_device_id *pci_tbl_entry)
3070 {
3071         static int cards_found;
3072         static int did_version;
3073         int err = -ENODEV;
3074         struct net_device *netdev;
3075         struct adapter *adapter;
3076         void __iomem *memmapped_ioaddr = NULL;
3077         ulong mmio_start = 0;
3078         ulong mmio_len = 0;
3079         struct sliccard *card = NULL;
3080         int pci_using_dac = 0;
3081
3082         slic_global.dynamic_intagg = dynamic_intagg;
3083
3084         err = pci_enable_device(pcidev);
3085
3086         if (err)
3087                 return err;
3088
3089         if (did_version++ == 0) {
3090                 dev_info(&pcidev->dev, "%s\n", slic_banner);
3091                 dev_info(&pcidev->dev, "%s\n", slic_proc_version);
3092         }
3093
3094         if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
3095                 pci_using_dac = 1;
3096                 err = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64));
3097                 if (err) {
3098                         dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for consistent allocations\n");
3099                         goto err_out_disable_pci;
3100                 }
3101         } else {
3102                 err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
3103                 if (err) {
3104                         dev_err(&pcidev->dev, "no usable DMA configuration\n");
3105                         goto err_out_disable_pci;
3106                 }
3107                 pci_using_dac = 0;
3108                 pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
3109         }
3110
3111         err = pci_request_regions(pcidev, DRV_NAME);
3112         if (err) {
3113                 dev_err(&pcidev->dev, "can't obtain PCI resources\n");
3114                 goto err_out_disable_pci;
3115         }
3116
3117         pci_set_master(pcidev);
3118
3119         netdev = alloc_etherdev(sizeof(struct adapter));
3120         if (!netdev) {
3121                 err = -ENOMEM;
3122                 goto err_out_exit_slic_probe;
3123         }
3124
3125         SET_NETDEV_DEV(netdev, &pcidev->dev);
3126
3127         pci_set_drvdata(pcidev, netdev);
3128         adapter = netdev_priv(netdev);
3129         adapter->netdev = netdev;
3130         adapter->pcidev = pcidev;
3131         if (pci_using_dac)
3132                 netdev->features |= NETIF_F_HIGHDMA;
3133
3134         mmio_start = pci_resource_start(pcidev, 0);
3135         mmio_len = pci_resource_len(pcidev, 0);
3136
3137
3138 /*      memmapped_ioaddr =  (u32)ioremap_nocache(mmio_start, mmio_len);*/
3139         memmapped_ioaddr = ioremap(mmio_start, mmio_len);
3140         if (!memmapped_ioaddr) {
3141                 dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
3142                         mmio_len, mmio_start);
3143                 err = -ENOMEM;
3144                 goto err_out_free_netdev;
3145         }
3146
3147         slic_config_pci(pcidev);
3148
3149         slic_init_driver();
3150
3151         slic_init_adapter(netdev,
3152                           pcidev, pci_tbl_entry, memmapped_ioaddr, cards_found);
3153
3154         err = slic_card_locate(adapter);
3155         if (err) {
3156                 dev_err(&pcidev->dev, "cannot locate card\n");
3157                 goto err_out_unmap;
3158         }
3159
3160         card = adapter->card;
3161
3162         if (!adapter->allocated) {
3163                 card->adapters_allocated++;
3164                 adapter->allocated = 1;
3165         }
3166
3167         err = slic_card_init(card, adapter);
3168         if (err)
3169                 goto err_out_unmap;
3170
3171         slic_adapter_set_hwaddr(adapter);
3172
3173         netdev->base_addr = (unsigned long) memmapped_ioaddr;
3174         netdev->irq = adapter->irq;
3175         netdev->netdev_ops = &slic_netdev_ops;
3176
3177         strcpy(netdev->name, "eth%d");
3178         err = register_netdev(netdev);
3179         if (err) {
3180                 dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
3181                 goto err_out_unmap;
3182         }
3183
3184         cards_found++;
3185
3186         return 0;
3187
3188 err_out_unmap:
3189         iounmap(memmapped_ioaddr);
3190 err_out_free_netdev:
3191         free_netdev(netdev);
3192 err_out_exit_slic_probe:
3193         pci_release_regions(pcidev);
3194 err_out_disable_pci:
3195         pci_disable_device(pcidev);
3196         return err;
3197 }
3198
3199 static struct pci_driver slic_driver = {
3200         .name = DRV_NAME,
3201         .id_table = slic_pci_tbl,
3202         .probe = slic_entry_probe,
3203         .remove = slic_entry_remove,
3204 };
3205
3206 static int __init slic_module_init(void)
3207 {
3208         slic_init_driver();
3209
3210         return pci_register_driver(&slic_driver);
3211 }
3212
3213 static void __exit slic_module_cleanup(void)
3214 {
3215         pci_unregister_driver(&slic_driver);
3216 }
3217
3218 module_init(slic_module_init);
3219 module_exit(slic_module_cleanup);