1 #include "wilc_wfi_cfgoperations.h"
2 #include "linux_wlan_common.h"
3 #include "wilc_wlan_if.h"
6 #include "wilc_wfi_cfgoperations.h"
9 #include "linux_wlan_common.h"
11 #include <linux/slab.h>
12 #include <linux/sched.h>
13 #include <linux/delay.h>
14 #include <linux/workqueue.h>
15 #include <linux/interrupt.h>
16 #include <linux/irq.h>
17 #include <linux/gpio.h>
19 #include <linux/kthread.h>
20 #include <linux/firmware.h>
21 #include <linux/delay.h>
23 #include <linux/init.h>
24 #include <linux/netdevice.h>
25 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
26 #include <linux/inetdevice.h>
28 #include <linux/etherdevice.h>
29 #include <linux/module.h>
30 #include <linux/kernel.h>
31 #include <linux/skbuff.h>
33 #include <linux/version.h>
34 #include <linux/semaphore.h>
37 #include "linux_wlan_sdio.h"
39 #include "linux_wlan_spi.h"
42 #ifdef WILC_FULLY_HOSTING_AP
43 #include "wilc_host_ap.h"
46 #ifdef STATIC_MACADDRESS /* brandy_0724 [[ */
47 #include <linux/vmalloc.h>
49 struct task_struct *wilc_mac_thread;
50 unsigned char mac_add[] = {0x00, 0x80, 0xC2, 0x5E, 0xa2, 0xb2};
51 #endif /* brandy_0724 ]] */
53 #if defined(CUSTOMER_PLATFORM)
55 TODO : Write power control functions as customer platform.
59 #define _linux_wlan_device_power_on() {}
60 #define _linux_wlan_device_power_off() {}
62 #define _linux_wlan_device_detection() {}
63 #define _linux_wlan_device_removal() {}
66 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
67 extern bool g_obtainingIP;
69 extern u16 Set_machw_change_vir_if(bool bValue);
70 extern void resolve_disconnect_aberration(void *drvHandler);
71 extern u8 gau8MulticastMacAddrList[WILC_MULTICAST_TABLE_SIZE][ETH_ALEN];
72 void wilc1000_wlan_deinit(linux_wlan_t *nic);
73 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
74 extern struct timer_list hDuringIpTimer;
77 static int linux_wlan_device_power(int on_off)
79 PRINT_D(INIT_DBG, "linux_wlan_device_power.. (%d)\n", on_off);
82 _linux_wlan_device_power_on();
84 _linux_wlan_device_power_off();
90 static int linux_wlan_device_detection(int on_off)
92 PRINT_D(INIT_DBG, "linux_wlan_device_detection.. (%d)\n", on_off);
96 _linux_wlan_device_detection();
98 _linux_wlan_device_removal();
105 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
106 static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr);
108 static struct notifier_block g_dev_notifier = {
109 .notifier_call = dev_state_ev_handler
113 #define wilc_wlan_deinit(nic) { if (&g_linux_wlan->oup != NULL) \
114 if (g_linux_wlan->oup.wlan_cleanup != NULL) \
115 g_linux_wlan->oup.wlan_cleanup(); }
118 #define STA_FIRMWARE "wifi_firmware.bin"
122 #define AP_FIRMWARE "wifi_firmware_ap.bin"
125 #ifndef P2P_CONCURRENCY_FIRMWARE
126 #define P2P_CONCURRENCY_FIRMWARE "wifi_firmware_p2p_concurrency.bin"
129 typedef struct android_wifi_priv_cmd {
133 } android_wifi_priv_cmd;
136 #define IRQ_NO_WAIT 0
138 * to sync between mac_close and module exit.
139 * don't initialize or de-initialize from init/deinitlocks
140 * to be initialized from module wilc_netdev_init and
141 * deinitialized from mdoule_exit
143 static struct semaphore close_exit_sync;
144 unsigned int int_rcvdU;
145 unsigned int int_rcvdB;
146 unsigned int int_clrd;
148 static int wlan_deinit_locks(linux_wlan_t *nic);
149 static void wlan_deinitialize_threads(linux_wlan_t *nic);
150 static void linux_wlan_lock(void *vp);
151 void linux_wlan_unlock(void *vp);
152 extern void WILC_WFI_monitor_rx(uint8_t *buff, uint32_t size);
153 extern void WILC_WFI_p2p_rx(struct net_device *dev, uint8_t *buff, uint32_t size);
155 static void *internal_alloc(uint32_t size, uint32_t flag);
156 static void linux_wlan_tx_complete(void *priv, int status);
157 void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset);
158 static int mac_init_fn(struct net_device *ndev);
159 int mac_xmit(struct sk_buff *skb, struct net_device *dev);
160 int mac_open(struct net_device *ndev);
161 int mac_close(struct net_device *ndev);
162 static struct net_device_stats *mac_stats(struct net_device *dev);
163 static int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd);
164 static void wilc_set_multicast_list(struct net_device *dev);
167 * for now - in frmw_to_linux there should be private data to be passed to it
168 * and this data should be pointer to net device
170 linux_wlan_t *g_linux_wlan;
171 wilc_wlan_oup_t *gpstrWlanOps;
172 bool bEnablePS = true;
174 static const struct net_device_ops wilc_netdev_ops = {
175 .ndo_init = mac_init_fn,
176 .ndo_open = mac_open,
177 .ndo_stop = mac_close,
178 .ndo_start_xmit = mac_xmit,
179 .ndo_do_ioctl = mac_ioctl,
180 .ndo_get_stats = mac_stats,
181 .ndo_set_rx_mode = wilc_set_multicast_list,
187 extern volatile int timeNo;
189 #define DEGUG_BUFFER_LENGTH 1000
190 volatile int WatchDogdebuggerCounter;
191 char DebugBuffer[DEGUG_BUFFER_LENGTH + 20] = {0};
192 static char *ps8current = DebugBuffer;
194 void printk_later(const char *format, ...)
197 va_start(args, format);
198 ps8current += vsprintf(ps8current, format, args);
200 if ((ps8current - DebugBuffer) > DEGUG_BUFFER_LENGTH)
201 ps8current = DebugBuffer;
207 if (DebugBuffer[0]) {
208 DebugBuffer[DEGUG_BUFFER_LENGTH] = 0;
209 PRINT_INFO(GENERIC_DBG, "early printed\n");
210 PRINT_D(GENERIC_DBG, ps8current + 1);
212 PRINT_INFO(GENERIC_DBG, "latest printed\n");
213 PRINT_D(GENERIC_DBG, DebugBuffer);
215 ps8current = DebugBuffer;
219 void Reset_WatchDogdebugger(void)
221 WatchDogdebuggerCounter = 0;
224 static int DebuggingThreadTask(void *vp)
227 while (!WatchDogdebuggerCounter) {
228 PRINT_D(GENERIC_DBG, "Debug Thread Running %d\n", timeNo);
229 WatchDogdebuggerCounter = 1;
233 WatchDogdebuggerCounter = 0;
238 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
239 static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr)
241 struct in_ifaddr *dev_iface = (struct in_ifaddr *)ptr;
242 struct WILC_WFI_priv *priv;
243 tstrWILC_WFIDrv *pstrWFIDrv;
244 struct net_device *dev;
246 perInterface_wlan_t *nic;
248 char wlan_dev_name[5] = "wlan0";
250 if (dev_iface == NULL || dev_iface->ifa_dev == NULL || dev_iface->ifa_dev->dev == NULL) {
251 PRINT_D(GENERIC_DBG, "dev_iface = NULL\n");
255 if ((memcmp(dev_iface->ifa_label, "wlan0", 5)) && (memcmp(dev_iface->ifa_label, "p2p0", 4))) {
256 PRINT_D(GENERIC_DBG, "Interface is neither WLAN0 nor P2P0\n");
260 dev = (struct net_device *)dev_iface->ifa_dev->dev;
261 if (dev->ieee80211_ptr == NULL || dev->ieee80211_ptr->wiphy == NULL) {
262 PRINT_D(GENERIC_DBG, "No Wireless registerd\n");
265 priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
267 PRINT_D(GENERIC_DBG, "No Wireless Priv\n");
270 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
271 nic = netdev_priv(dev);
272 if (nic == NULL || pstrWFIDrv == NULL) {
273 PRINT_D(GENERIC_DBG, "No Wireless Priv\n");
277 PRINT_INFO(GENERIC_DBG, "dev_state_ev_handler +++\n"); /* tony */
281 PRINT_D(GENERIC_DBG, "dev_state_ev_handler event=NETDEV_UP %p\n", dev); /* tony */
283 PRINT_INFO(GENERIC_DBG, "\n ============== IP Address Obtained ===============\n\n");
285 /*If we are in station mode or client mode*/
286 if (nic->iftype == STATION_MODE || nic->iftype == CLIENT_MODE) {
287 pstrWFIDrv->IFC_UP = 1;
288 g_obtainingIP = false;
289 del_timer(&hDuringIpTimer);
290 PRINT_D(GENERIC_DBG, "IP obtained , enable scan\n");
294 host_int_set_power_mgmt(pstrWFIDrv, 1, 0);
296 PRINT_D(GENERIC_DBG, "[%s] Up IP\n", dev_iface->ifa_label);
298 pIP_Add_buff = (char *) (&(dev_iface->ifa_address));
299 PRINT_D(GENERIC_DBG, "IP add=%d:%d:%d:%d\n", pIP_Add_buff[0], pIP_Add_buff[1], pIP_Add_buff[2], pIP_Add_buff[3]);
300 host_int_setup_ipaddress(pstrWFIDrv, pIP_Add_buff, nic->u8IfIdx);
305 PRINT_D(GENERIC_DBG, "dev_state_ev_handler event=NETDEV_DOWN %p\n", dev); /* tony */
307 PRINT_INFO(GENERIC_DBG, "\n ============== IP Address Released ===============\n\n");
308 if (nic->iftype == STATION_MODE || nic->iftype == CLIENT_MODE) {
309 pstrWFIDrv->IFC_UP = 0;
310 g_obtainingIP = false;
313 if (memcmp(dev_iface->ifa_label, wlan_dev_name, 5) == 0)
314 host_int_set_power_mgmt(pstrWFIDrv, 0, 0);
316 resolve_disconnect_aberration(pstrWFIDrv);
318 PRINT_D(GENERIC_DBG, "[%s] Down IP\n", dev_iface->ifa_label);
320 pIP_Add_buff = null_ip;
321 PRINT_D(GENERIC_DBG, "IP add=%d:%d:%d:%d\n", pIP_Add_buff[0], pIP_Add_buff[1], pIP_Add_buff[2], pIP_Add_buff[3]);
323 host_int_setup_ipaddress(pstrWFIDrv, pIP_Add_buff, nic->u8IfIdx);
328 PRINT_INFO(GENERIC_DBG, "dev_state_ev_handler event=default\n"); /* tony */
329 PRINT_INFO(GENERIC_DBG, "[%s] unknown dev event: %lu\n", dev_iface->ifa_label, event);
340 * Interrupt initialization and handling functions
343 void linux_wlan_enable_irq(void)
346 #if (RX_BH_TYPE != RX_BH_THREADED_IRQ)
347 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
348 PRINT_D(INT_DBG, "Enabling IRQ ...\n");
349 enable_irq(g_linux_wlan->dev_irq_num);
354 void linux_wlan_disable_irq(int wait)
356 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
358 PRINT_D(INT_DBG, "Disabling IRQ ...\n");
359 disable_irq(g_linux_wlan->dev_irq_num);
361 PRINT_D(INT_DBG, "Disabling IRQ ...\n");
362 disable_irq_nosync(g_linux_wlan->dev_irq_num);
367 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
368 static irqreturn_t isr_uh_routine(int irq, void *user_data)
371 #if (RX_BH_TYPE != RX_BH_THREADED_IRQ)
372 linux_wlan_disable_irq(IRQ_NO_WAIT);
374 PRINT_D(INT_DBG, "Interrupt received UH\n");
376 /*While mac is closing cacncel the handling of any interrupts received*/
377 if (g_linux_wlan->close) {
378 PRINT_ER("Driver is CLOSING: Can't handle UH interrupt\n");
379 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
386 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
387 schedule_work(&g_linux_wlan->rx_work_queue);
389 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
390 linux_wlan_unlock(&g_linux_wlan->rx_sem);
392 #elif (RX_BH_TYPE == RX_BH_THREADED_IRQ)
393 return IRQ_WAKE_THREAD;
399 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE || RX_BH_TYPE == RX_BH_THREADED_IRQ)
401 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
402 irqreturn_t isr_bh_routine(int irq, void *userdata)
405 nic = (linux_wlan_t *)userdata;
407 static void isr_bh_routine(struct work_struct *work)
409 perInterface_wlan_t *nic;
410 nic = (perInterface_wlan_t *)container_of(work, linux_wlan_t, rx_work_queue);
413 /*While mac is closing cacncel the handling of any interrupts received*/
414 if (g_linux_wlan->close) {
415 PRINT_ER("Driver is CLOSING: Can't handle BH interrupt\n");
416 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
424 PRINT_D(INT_DBG, "Interrupt received BH\n");
425 if (g_linux_wlan->oup.wlan_handle_rx_isr != 0)
426 g_linux_wlan->oup.wlan_handle_rx_isr();
428 PRINT_ER("wlan_handle_rx_isr() hasn't been initialized\n");
430 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
434 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
435 static int isr_bh_routine(void *vp)
439 nic = (linux_wlan_t *)vp;
442 linux_wlan_lock(&nic->rx_sem);
443 if (g_linux_wlan->close) {
445 while (!kthread_should_stop())
451 PRINT_D(INT_DBG, "Interrupt received BH\n");
452 if (g_linux_wlan->oup.wlan_handle_rx_isr != 0)
453 g_linux_wlan->oup.wlan_handle_rx_isr();
455 PRINT_ER("wlan_handle_rx_isr() hasn't been initialized\n");
462 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
463 static int init_irq(linux_wlan_t *p_nic)
466 linux_wlan_t *nic = p_nic;
468 /*initialize GPIO and register IRQ num*/
470 if ((gpio_request(GPIO_NUM, "WILC_INTR") == 0) &&
471 (gpio_direction_input(GPIO_NUM) == 0)) {
472 #if defined(CUSTOMER_PLATFORM)
474 TODO : save the registerd irq number to the private wilc context in kernel.
476 * ex) nic->dev_irq_num = gpio_to_irq(GPIO_NUM);
478 #elif defined(NM73131_0_BOARD)
479 nic->dev_irq_num = IRQ_WILC1000;
480 #elif defined(PANDA_BOARD)
481 gpio_export(GPIO_NUM, 1);
482 nic->dev_irq_num = OMAP_GPIO_IRQ(GPIO_NUM);
483 irq_set_irq_type(nic->dev_irq_num, IRQ_TYPE_LEVEL_LOW);
485 nic->dev_irq_num = gpio_to_irq(GPIO_NUM);
489 PRINT_ER("could not obtain gpio for WILC_INTR\n");
492 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
493 if ((ret != -1) && (request_threaded_irq(nic->dev_irq_num, isr_uh_routine, isr_bh_routine,
494 IRQF_TRIGGER_LOW | IRQF_ONESHOT, /*Without IRQF_ONESHOT the uh will remain kicked in and dont gave a chance to bh*/
495 "WILC_IRQ", nic)) < 0) {
499 if ((ret != -1) && (request_irq(nic->dev_irq_num, isr_uh_routine,
500 IRQF_TRIGGER_LOW, "WILC_IRQ", nic) < 0)) {
503 PRINT_ER("Failed to request IRQ for GPIO: %d\n", GPIO_NUM);
507 PRINT_D(INIT_DBG, "IRQ request succeeded IRQ-NUM= %d on GPIO: %d\n",
508 nic->dev_irq_num, GPIO_NUM);
515 static void deinit_irq(linux_wlan_t *nic)
517 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
518 /* Deintialize IRQ */
519 if (&nic->dev_irq_num != 0) {
520 free_irq(nic->dev_irq_num, g_linux_wlan);
530 static void linux_wlan_msleep(uint32_t msc)
532 if (msc <= 4000000) {
533 u32 u32Temp = msc * 1000;
534 usleep_range(u32Temp, u32Temp);
540 static void linux_wlan_atomic_msleep(uint32_t msc)
544 static void linux_wlan_dbg(uint8_t *buff)
546 PRINT_D(INIT_DBG, "%d\n", *buff);
549 static void *linux_wlan_malloc_atomic(uint32_t sz)
552 pntr = kmalloc(sz, GFP_ATOMIC);
553 PRINT_D(MEM_DBG, "Allocating %d bytes at address %p\n", sz, pntr);
557 static void *linux_wlan_malloc(uint32_t sz)
560 pntr = kmalloc(sz, GFP_KERNEL);
561 PRINT_D(MEM_DBG, "Allocating %d bytes at address %p\n", sz, pntr);
565 void linux_wlan_free(void *vp)
568 PRINT_D(MEM_DBG, "Freeing %p\n", vp);
573 static void *internal_alloc(uint32_t size, uint32_t flag)
576 pntr = kmalloc(size, flag);
577 PRINT_D(MEM_DBG, "Allocating %d bytes at address %p\n", size, pntr);
581 static void linux_wlan_init_lock(char *lockName, void *plock, int count)
583 sema_init((struct semaphore *)plock, count);
584 PRINT_D(LOCK_DBG, "Initializing [%s][%p]\n", lockName, plock);
588 static void linux_wlan_deinit_lock(void *plock)
590 /* mutex_destroy((struct mutex*)plock); */
593 static void linux_wlan_lock(void *vp)
595 PRINT_D(LOCK_DBG, "Locking %p\n", vp);
597 while (down_interruptible((struct semaphore *) vp))
600 PRINT_ER("Failed, mutex is NULL\n");
604 static int linux_wlan_lock_timeout(void *vp, u32 timeout)
607 PRINT_D(LOCK_DBG, "Locking %p\n", vp);
609 error = down_timeout((struct semaphore *)vp, msecs_to_jiffies(timeout));
611 PRINT_ER("Failed, mutex is NULL\n");
615 void linux_wlan_unlock(void *vp)
617 PRINT_D(LOCK_DBG, "Unlocking %p\n", vp);
619 up((struct semaphore *)vp);
621 PRINT_ER("Failed, mutex is NULL\n");
624 static void linux_wlan_init_mutex(char *lockName, void *plock, int count)
626 mutex_init((struct mutex *)plock);
627 PRINT_D(LOCK_DBG, "Initializing mutex [%s][%p]\n", lockName, plock);
631 static void linux_wlan_deinit_mutex(void *plock)
633 mutex_destroy((struct mutex *)plock);
636 static void linux_wlan_lock_mutex(void *vp)
638 PRINT_D(LOCK_DBG, "Locking mutex %p\n", vp);
641 * if(mutex_is_locked((struct mutex*)vp))
643 * //PRINT_ER("Mutex already locked - %p \n",vp);
646 mutex_lock((struct mutex *)vp);
649 PRINT_ER("Failed, mutex is NULL\n");
653 static void linux_wlan_unlock_mutex(void *vp)
655 PRINT_D(LOCK_DBG, "Unlocking mutex %p\n", vp);
658 if (mutex_is_locked((struct mutex *)vp)) {
659 mutex_unlock((struct mutex *)vp);
661 /* PRINT_ER("Mutex already unlocked - %p\n",vp); */
665 PRINT_ER("Failed, mutex is NULL\n");
669 /*Added by Amr - BugID_4720*/
670 static void linux_wlan_init_spin_lock(char *lockName, void *plock, int count)
672 spin_lock_init((spinlock_t *)plock);
673 PRINT_D(SPIN_DEBUG, "Initializing mutex [%s][%p]\n", lockName, plock);
677 static void linux_wlan_deinit_spin_lock(void *plock)
681 static void linux_wlan_spin_lock(void *vp, unsigned long *flags)
683 unsigned long lflags;
684 PRINT_D(SPIN_DEBUG, "Lock spin %p\n", vp);
686 spin_lock_irqsave((spinlock_t *)vp, lflags);
689 PRINT_ER("Failed, spin lock is NULL\n");
692 static void linux_wlan_spin_unlock(void *vp, unsigned long *flags)
694 unsigned long lflags = *flags;
695 PRINT_D(SPIN_DEBUG, "Unlock spin %p\n", vp);
697 spin_unlock_irqrestore((spinlock_t *)vp, lflags);
700 PRINT_ER("Failed, spin lock is NULL\n");
704 static void linux_wlan_mac_indicate(int flag)
706 /*I have to do it that way becuase there is no mean to encapsulate device pointer
709 linux_wlan_t *pd = g_linux_wlan;
712 if (flag == WILC_MAC_INDICATE_STATUS) {
713 pd->oup.wlan_cfg_get_value(WID_STATUS, (unsigned char *)&status, 4);
714 if (pd->mac_status == WILC_MAC_STATUS_INIT) {
715 pd->mac_status = status;
716 linux_wlan_unlock(&pd->sync_event);
718 pd->mac_status = status;
721 if (pd->mac_status == WILC_MAC_STATUS_CONNECT) { /* Connect */
724 } else if (flag == WILC_MAC_INDICATE_SCAN) {
725 PRINT_D(GENERIC_DBG, "Scanning ...\n");
731 struct net_device *GetIfHandler(uint8_t *pMacHeader)
733 uint8_t *Bssid, *Bssid1;
736 Bssid = pMacHeader + 10;
737 Bssid1 = pMacHeader + 4;
739 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
740 if (!memcmp(Bssid1, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN) ||
741 !memcmp(Bssid, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN)) {
742 return g_linux_wlan->strInterfaceInfo[i].wilc_netdev;
745 PRINT_INFO(INIT_DBG, "Invalide handle\n");
746 for (i = 0; i < 25; i++)
747 PRINT_D(INIT_DBG, "%02x ", pMacHeader[i]);
748 Bssid = pMacHeader + 18;
749 Bssid1 = pMacHeader + 12;
750 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
751 if (!memcmp(Bssid1, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN) ||
752 !memcmp(Bssid, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN)) {
753 PRINT_D(INIT_DBG, "Ctx [%p]\n", g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
754 return g_linux_wlan->strInterfaceInfo[i].wilc_netdev;
757 PRINT_INFO(INIT_DBG, "\n");
761 int linux_wlan_set_bssid(struct net_device *wilc_netdev, uint8_t *pBSSID)
766 PRINT_D(INIT_DBG, "set bssid on[%p]\n", wilc_netdev);
767 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
768 if (g_linux_wlan->strInterfaceInfo[i].wilc_netdev == wilc_netdev) {
769 PRINT_D(INIT_DBG, "set bssid [%x][%x][%x]\n", pBSSID[0], pBSSID[1], pBSSID[2]);
770 memcpy(g_linux_wlan->strInterfaceInfo[i].aBSSID, pBSSID, 6);
779 /*Function to get number of connected interfaces*/
780 int linux_wlan_get_num_conn_ifcs(void)
783 uint8_t null_bssid[6] = {0};
786 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
787 if (memcmp(g_linux_wlan->strInterfaceInfo[i].aBSSID, null_bssid, 6))
793 static int linux_wlan_rxq_task(void *vp)
796 /* inform wilc1000_wlan_init that RXQ task is started. */
797 linux_wlan_unlock(&g_linux_wlan->rxq_thread_started);
799 linux_wlan_lock(&g_linux_wlan->rxq_event);
800 /* wait_for_completion(&g_linux_wlan->rxq_event); */
802 if (g_linux_wlan->close) {
803 /*Unlock the mutex in the mac_close function to indicate the exiting of the RX thread */
804 linux_wlan_unlock(&g_linux_wlan->rxq_thread_started);
806 while (!kthread_should_stop())
809 PRINT_D(RX_DBG, " RX thread stopped\n");
812 PRINT_D(RX_DBG, "Calling wlan_handle_rx_que()\n");
814 g_linux_wlan->oup.wlan_handle_rx_que();
819 #define USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS
821 static int linux_wlan_txq_task(void *vp)
825 #if defined USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS
826 #define TX_BACKOFF_WEIGHT_INCR_STEP (1)
827 #define TX_BACKOFF_WEIGHT_DECR_STEP (1)
828 #define TX_BACKOFF_WEIGHT_MAX (7)
829 #define TX_BACKOFF_WEIGHT_MIN (0)
830 #define TX_BACKOFF_WEIGHT_UNIT_MS (10)
831 int backoff_weight = TX_BACKOFF_WEIGHT_MIN;
834 /* inform wilc1000_wlan_init that TXQ task is started. */
835 linux_wlan_unlock(&g_linux_wlan->txq_thread_started);
838 PRINT_D(TX_DBG, "txq_task Taking a nap :)\n");
839 linux_wlan_lock(&g_linux_wlan->txq_event);
840 /* wait_for_completion(&pd->txq_event); */
841 PRINT_D(TX_DBG, "txq_task Who waked me up :$\n");
843 if (g_linux_wlan->close) {
844 /*Unlock the mutex in the mac_close function to indicate the exiting of the TX thread */
845 linux_wlan_unlock(&g_linux_wlan->txq_thread_started);
847 while (!kthread_should_stop())
850 PRINT_D(TX_DBG, "TX thread stopped\n");
853 PRINT_D(TX_DBG, "txq_task handle the sending packet and let me go to sleep.\n");
854 #if !defined USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS
855 g_linux_wlan->oup.wlan_handle_tx_que();
858 ret = g_linux_wlan->oup.wlan_handle_tx_que(&txq_count);
859 if (txq_count < FLOW_CONTROL_LOWER_THRESHOLD /* && netif_queue_stopped(pd->wilc_netdev)*/) {
860 PRINT_D(TX_DBG, "Waking up queue\n");
861 /* netif_wake_queue(pd->wilc_netdev); */
862 if (netif_queue_stopped(g_linux_wlan->strInterfaceInfo[0].wilc_netdev))
863 netif_wake_queue(g_linux_wlan->strInterfaceInfo[0].wilc_netdev);
864 if (netif_queue_stopped(g_linux_wlan->strInterfaceInfo[1].wilc_netdev))
865 netif_wake_queue(g_linux_wlan->strInterfaceInfo[1].wilc_netdev);
868 if (ret == WILC_TX_ERR_NO_BUF) { /* failed to allocate buffers in chip. */
870 /* Back off from sending packets for some time. */
871 /* schedule_timeout will allow RX task to run and free buffers.*/
872 /* set_current_state(TASK_UNINTERRUPTIBLE); */
873 /* timeout = schedule_timeout(timeout); */
874 msleep(TX_BACKOFF_WEIGHT_UNIT_MS << backoff_weight);
875 } while (/*timeout*/ 0);
876 backoff_weight += TX_BACKOFF_WEIGHT_INCR_STEP;
877 if (backoff_weight > TX_BACKOFF_WEIGHT_MAX)
878 backoff_weight = TX_BACKOFF_WEIGHT_MAX;
880 if (backoff_weight > TX_BACKOFF_WEIGHT_MIN) {
881 backoff_weight -= TX_BACKOFF_WEIGHT_DECR_STEP;
882 if (backoff_weight < TX_BACKOFF_WEIGHT_MIN)
883 backoff_weight = TX_BACKOFF_WEIGHT_MIN;
886 /*TODO: drop packets after a certain time/number of retry count. */
887 } while (ret == WILC_TX_ERR_NO_BUF && !g_linux_wlan->close); /* retry sending packets if no more buffers in chip. */
893 static void linux_wlan_rx_complete(void)
895 PRINT_D(RX_DBG, "RX completed\n");
898 int linux_wlan_get_firmware(perInterface_wlan_t *p_nic)
901 perInterface_wlan_t *nic = p_nic;
903 const struct firmware *wilc_firmware;
906 if (nic->iftype == AP_MODE)
907 firmware = AP_FIRMWARE;
908 else if (nic->iftype == STATION_MODE)
909 firmware = STA_FIRMWARE;
913 PRINT_D(INIT_DBG, "Get P2P_CONCURRENCY_FIRMWARE\n");
914 firmware = P2P_CONCURRENCY_FIRMWARE;
918 PRINT_ER("NIC is NULL\n");
922 if (&nic->wilc_netdev->dev == NULL) {
923 PRINT_ER("&nic->wilc_netdev->dev is NULL\n");
927 /* the firmare should be located in /lib/firmware in
928 * root file system with the name specified above */
931 if (request_firmware(&wilc_firmware, firmware, &g_linux_wlan->wilc_sdio_func->dev) != 0) {
932 PRINT_ER("%s - firmare not available\n", firmware);
937 if (request_firmware(&wilc_firmware, firmware, &g_linux_wlan->wilc_spidev->dev) != 0) {
938 PRINT_ER("%s - firmare not available\n", firmware);
943 g_linux_wlan->wilc_firmware = wilc_firmware; /* Bug 4703 */
951 #ifdef COMPLEMENT_BOOT
952 int repeat_power_cycle(perInterface_wlan_t *nic);
955 static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
960 PRINT_D(INIT_DBG, "Starting Firmware ...\n");
961 ret = g_linux_wlan->oup.wlan_start();
963 PRINT_ER("Failed to start Firmware\n");
967 /* wait for mac ready */
968 PRINT_D(INIT_DBG, "Waiting for Firmware to get ready ...\n");
969 ret = linux_wlan_lock_timeout(&g_linux_wlan->sync_event, 5000);
971 #ifdef COMPLEMENT_BOOT
972 static int timeout = 5;
975 PRINT_D(INIT_DBG, "repeat power cycle[%d]", timeout);
976 ret = repeat_power_cycle(nic);
983 PRINT_D(INIT_DBG, "Firmware start timed out");
987 * TODO: Driver shouoldn't wait forever for firmware to get started -
988 * in case of timeout this should be handled properly
990 PRINT_D(INIT_DBG, "Firmware successfully started\n");
995 static int linux_wlan_firmware_download(linux_wlan_t *p_nic)
1000 if (g_linux_wlan->wilc_firmware == NULL) {
1001 PRINT_ER("Firmware buffer is NULL\n");
1006 * do the firmware download
1008 PRINT_D(INIT_DBG, "Downloading Firmware ...\n");
1009 ret = g_linux_wlan->oup.wlan_firmware_download(g_linux_wlan->wilc_firmware->data, g_linux_wlan->wilc_firmware->size);
1013 /* Freeing FW buffer */
1014 PRINT_D(INIT_DBG, "Freeing FW buffer ...\n");
1015 PRINT_D(INIT_DBG, "Releasing firmware\n");
1016 release_firmware(g_linux_wlan->wilc_firmware);
1017 g_linux_wlan->wilc_firmware = NULL;
1019 PRINT_D(INIT_DBG, "Download Succeeded\n");
1025 /* startup configuration - could be changed later using iconfig*/
1026 static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_nic)
1029 unsigned char c_val[64];
1030 #ifndef STATIC_MACADDRESS
1031 unsigned char mac_add[] = {0x00, 0x80, 0xC2, 0x5E, 0xa2, 0xff};
1035 struct WILC_WFI_priv *priv;
1036 tstrWILC_WFIDrv *pstrWFIDrv;
1038 PRINT_D(TX_DBG, "Start configuring Firmware\n");
1039 #ifndef STATIC_MACADDRESS
1040 get_random_bytes(&mac_add[5], 1);
1041 get_random_bytes(&mac_add[4], 1);
1043 priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
1044 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
1045 PRINT_D(INIT_DBG, "Host = %p\n", pstrWFIDrv);
1047 PRINT_D(INIT_DBG, "MAC address is : %02x-%02x-%02x-%02x-%02x-%02x\n", mac_add[0], mac_add[1], mac_add[2], mac_add[3], mac_add[4], mac_add[5]);
1050 if (g_linux_wlan->oup.wlan_cfg_set == NULL) {
1051 PRINT_D(INIT_DBG, "Null p[ointer\n");
1055 *(int *)c_val = (u32)pstrWFIDrv;
1057 if (!g_linux_wlan->oup.wlan_cfg_set(1, WID_SET_DRV_HANDLER, c_val, 4, 0, 0))
1060 /*to tell fw that we are going to use PC test - WILC specific*/
1062 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_PC_TEST_MODE, c_val, 1, 0, 0))
1065 c_val[0] = INFRASTRUCTURE;
1066 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BSS_TYPE, c_val, 1, 0, 0))
1069 /* c_val[0] = RATE_AUTO; / * bug 4275: Enable autorate and limit it to 24Mbps * / */
1070 c_val[0] = RATE_AUTO;
1071 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0))
1074 c_val[0] = G_MIXED_11B_2_MODE;
1075 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11G_OPERATING_MODE, c_val, 1, 0, 0))
1079 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_CURRENT_CHANNEL, c_val, 1, 0, 0))
1082 c_val[0] = G_SHORT_PREAMBLE;
1083 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_PREAMBLE, c_val, 1, 0, 0))
1086 c_val[0] = AUTO_PROT;
1087 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_PROT_MECH, c_val, 1, 0, 0))
1090 #ifdef SWITCH_LOG_TERMINAL
1091 c_val[0] = AUTO_PROT;
1092 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_LOGTerminal_Switch, c_val, 1, 0, 0))
1096 c_val[0] = ACTIVE_SCAN;
1097 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SCAN_TYPE, c_val, 1, 0, 0))
1100 c_val[0] = SITE_SURVEY_OFF;
1101 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SITE_SURVEY, c_val, 1, 0, 0))
1104 *((int *)c_val) = 0xffff; /* Never use RTS-CTS */
1105 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_RTS_THRESHOLD, c_val, 2, 0, 0))
1108 *((int *)c_val) = 2346;
1109 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_FRAG_THRESHOLD, c_val, 2, 0, 0))
1113 /* -------------------------------------------------------------- */
1114 /* Configuration : String with length less than 32 bytes */
1115 /* Values to set : Any string with length less than 32 bytes */
1116 /* ( In BSS Station Set SSID to "" (null string) */
1117 /* to enable Broadcast SSID suppport ) */
1118 /* -------------------------------------------------------------- */
1119 #ifndef USE_WIRELESS
1120 strcpy(c_val, "nwifi");
1121 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SSID, c_val, (strlen(c_val) + 1), 0, 0))
1126 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BCAST_SSID, c_val, 1, 0, 0))
1130 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_QOS_ENABLE, c_val, 1, 0, 0))
1133 c_val[0] = NO_POWERSAVE;
1134 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_POWER_MANAGEMENT, c_val, 1, 0, 0))
1137 c_val[0] = NO_ENCRYPT; /* NO_ENCRYPT, 0x79 */
1138 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11I_MODE, c_val, 1, 0, 0))
1141 c_val[0] = OPEN_SYSTEM;
1142 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_AUTH_TYPE, c_val, 1, 0, 0))
1145 /* WEP/802 11I Configuration */
1146 /* ------------------------------------------------------------------ */
1147 /* Configuration : WEP Key */
1148 /* Values (0x) : 5 byte for WEP40 and 13 bytes for WEP104 */
1149 /* In case more than 5 bytes are passed on for WEP 40 */
1150 /* only first 5 bytes will be used as the key */
1151 /* ------------------------------------------------------------------ */
1153 strcpy(c_val, "123456790abcdef1234567890");
1154 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_WEP_KEY_VALUE, c_val, (strlen(c_val) + 1), 0, 0))
1157 /* WEP/802 11I Configuration */
1158 /* ------------------------------------------------------------------ */
1159 /* Configuration : AES/TKIP WPA/RSNA Pre-Shared Key */
1160 /* Values to set : Any string with length greater than equal to 8 bytes */
1161 /* and less than 64 bytes */
1162 /* ------------------------------------------------------------------ */
1163 strcpy(c_val, "12345678");
1164 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11I_PSK, c_val, (strlen(c_val)), 0, 0))
1167 /* IEEE802.1X Key Configuration */
1168 /* ------------------------------------------------------------------ */
1169 /* Configuration : Radius Server Access Secret Key */
1170 /* Values to set : Any string with length greater than equal to 8 bytes */
1171 /* and less than 65 bytes */
1172 /* ------------------------------------------------------------------ */
1173 strcpy(c_val, "password");
1174 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_1X_KEY, c_val, (strlen(c_val) + 1), 0, 0))
1177 /* IEEE802.1X Server Address Configuration */
1178 /* ------------------------------------------------------------------ */
1179 /* Configuration : Radius Server IP Address */
1180 /* Values to set : Any valid IP Address */
1181 /* ------------------------------------------------------------------ */
1186 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_1X_SERV_ADDR, c_val, 4, 0, 0))
1190 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_LISTEN_INTERVAL, c_val, 1, 0, 0))
1194 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_DTIM_PERIOD, c_val, 1, 0, 0))
1197 c_val[0] = NORMAL_ACK;
1198 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_ACK_POLICY, c_val, 1, 0, 0))
1202 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_USER_CONTROL_ON_TX_POWER, c_val, 1, 0, 0))
1206 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_TX_POWER_LEVEL_11A, c_val, 1, 0, 0))
1210 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_TX_POWER_LEVEL_11B, c_val, 1, 0, 0))
1213 /* Beacon Interval */
1214 /* -------------------------------------------------------------------- */
1215 /* Configuration : Sets the beacon interval value */
1216 /* Values to set : Any 16-bit value */
1217 /* -------------------------------------------------------------------- */
1219 *((int *)c_val) = 100;
1220 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BEACON_INTERVAL, c_val, 2, 0, 0))
1223 c_val[0] = REKEY_DISABLE;
1224 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_REKEY_POLICY, c_val, 1, 0, 0))
1227 /* Rekey Time (s) (Used only when the Rekey policy is 2 or 4) */
1228 /* -------------------------------------------------------------------- */
1229 /* Configuration : Sets the Rekey Time (s) */
1230 /* Values to set : 32-bit value */
1231 /* -------------------------------------------------------------------- */
1232 *((int *)c_val) = 84600;
1233 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_REKEY_PERIOD, c_val, 4, 0, 0))
1236 /* Rekey Packet Count (in 1000s; used when Rekey Policy is 3) */
1237 /* -------------------------------------------------------------------- */
1238 /* Configuration : Sets Rekey Group Packet count */
1239 /* Values to set : 32-bit Value */
1240 /* -------------------------------------------------------------------- */
1241 *((int *)c_val) = 500;
1242 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_REKEY_PACKET_COUNT, c_val, 4, 0, 0))
1246 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SHORT_SLOT_ALLOWED, c_val, 1, 0, 0))
1249 c_val[0] = G_SELF_CTS_PROT;
1250 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_ERP_PROT_TYPE, c_val, 1, 0, 0))
1253 c_val[0] = 1; /* Enable N */
1254 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_ENABLE, c_val, 1, 0, 0))
1257 c_val[0] = HT_MIXED_MODE;
1258 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_OPERATING_MODE, c_val, 1, 0, 0))
1261 c_val[0] = 1; /* TXOP Prot disable in N mode: No RTS-CTS on TX A-MPDUs to save air-time. */
1262 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_TXOP_PROT_DISABLE, c_val, 1, 0, 0))
1265 memcpy(c_val, mac_add, 6);
1267 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_MAC_ADDR, c_val, 6, 0, 0))
1273 c_val[0] = DETECT_PROTECT_REPORT;
1274 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_OBSS_NONHT_DETECTION, c_val, 1, 0, 0))
1277 c_val[0] = RTS_CTS_NONHT_PROT;
1278 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_HT_PROT_TYPE, c_val, 1, 0, 0))
1282 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_RIFS_PROT_ENABLE, c_val, 1, 0, 0))
1285 c_val[0] = MIMO_MODE;
1286 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_SMPS_MODE, c_val, 1, 0, 0))
1290 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_CURRENT_TX_MCS, c_val, 1, 0, 0))
1293 c_val[0] = 1; /* Enable N with immediate block ack. */
1294 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_IMMEDIATE_BA_ENABLED, c_val, 1, 1, (u32)pstrWFIDrv))
1303 /**************************/
1304 void wilc1000_wlan_deinit(linux_wlan_t *nic)
1307 if (g_linux_wlan->wilc1000_initialized) {
1309 printk("Deinitializing wilc1000 ...\n");
1312 PRINT_ER("nic is NULL\n");
1316 #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
1317 /* johnny : remove */
1318 PRINT_D(INIT_DBG, "skip wilc_bus_set_default_speed\n");
1320 wilc_bus_set_default_speed();
1323 PRINT_D(INIT_DBG, "Disabling IRQ\n");
1324 #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
1325 linux_wlan_disable_irq(IRQ_WAIT);
1327 #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
1330 linux_wlan_lock_mutex((void *)&g_linux_wlan->hif_cs);
1331 disable_sdio_interrupt();
1332 linux_wlan_unlock_mutex((void *)&g_linux_wlan->hif_cs);
1336 /* not sure if the following unlocks are needed or not*/
1337 if (&g_linux_wlan->rxq_event != NULL)
1338 linux_wlan_unlock(&g_linux_wlan->rxq_event);
1340 if (&g_linux_wlan->txq_event != NULL)
1341 linux_wlan_unlock(&g_linux_wlan->txq_event);
1343 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
1344 /*Removing the work struct from the linux kernel workqueue*/
1345 if (&g_linux_wlan->rx_work_queue != NULL)
1346 flush_work(&g_linux_wlan->rx_work_queue);
1348 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
1349 /* if(&nic->rx_sem != NULL) */
1350 /* linux_wlan_unlock(&nic->rx_sem); */
1353 PRINT_D(INIT_DBG, "Deinitializing Threads\n");
1354 wlan_deinitialize_threads(nic);
1356 PRINT_D(INIT_DBG, "Deinitializing IRQ\n");
1357 deinit_irq(g_linux_wlan);
1359 if (&g_linux_wlan->oup != NULL) {
1360 if (g_linux_wlan->oup.wlan_stop != NULL)
1361 g_linux_wlan->oup.wlan_stop();
1364 PRINT_D(INIT_DBG, "Deinitializing WILC Wlan\n");
1365 wilc_wlan_deinit(nic);
1366 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1367 #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
1368 PRINT_D(INIT_DBG, "Disabling IRQ 2\n");
1370 linux_wlan_lock_mutex((void *)&g_linux_wlan->hif_cs);
1371 disable_sdio_interrupt();
1372 linux_wlan_unlock_mutex((void *)&g_linux_wlan->hif_cs);
1376 /*De-Initialize locks*/
1377 PRINT_D(INIT_DBG, "Deinitializing Locks\n");
1378 wlan_deinit_locks(g_linux_wlan);
1380 /* announce that wilc1000 is not initialized */
1381 g_linux_wlan->wilc1000_initialized = 0;
1383 PRINT_D(INIT_DBG, "wilc1000 deinitialization Done\n");
1386 PRINT_D(INIT_DBG, "wilc1000 is not initialized\n");
1390 int wlan_init_locks(linux_wlan_t *p_nic)
1393 PRINT_D(INIT_DBG, "Initializing Locks ...\n");
1395 /*initialize mutexes*/
1396 linux_wlan_init_mutex("hif_lock/hif_cs", &g_linux_wlan->hif_cs, 1);
1397 linux_wlan_init_mutex("rxq_lock/rxq_cs", &g_linux_wlan->rxq_cs, 1);
1398 linux_wlan_init_mutex("txq_lock/txq_cs", &g_linux_wlan->txq_cs, 1);
1400 /*Added by Amr - BugID_4720*/
1401 linux_wlan_init_spin_lock("txq_spin_lock/txq_cs", &g_linux_wlan->txq_spinlock, 1);
1403 /*Added by Amr - BugID_4720*/
1404 linux_wlan_init_lock("txq_add_to_head_lock/txq_cs", &g_linux_wlan->txq_add_to_head_cs, 1);
1406 linux_wlan_init_lock("txq_wait/txq_event", &g_linux_wlan->txq_event, 0);
1407 linux_wlan_init_lock("rxq_wait/rxq_event", &g_linux_wlan->rxq_event, 0);
1409 linux_wlan_init_lock("cfg_wait/cfg_event", &g_linux_wlan->cfg_event, 0);
1410 linux_wlan_init_lock("sync_event", &g_linux_wlan->sync_event, 0);
1412 linux_wlan_init_lock("rxq_lock/rxq_started", &g_linux_wlan->rxq_thread_started, 0);
1413 linux_wlan_init_lock("rxq_lock/txq_started", &g_linux_wlan->txq_thread_started, 0);
1415 #if (RX_BH_TYPE == RX_BH_KTHREAD)
1416 linux_wlan_init_lock("BH_SEM", &g_linux_wlan->rx_sem, 0);
1422 static int wlan_deinit_locks(linux_wlan_t *nic)
1424 PRINT_D(INIT_DBG, "De-Initializing Locks\n");
1426 if (&g_linux_wlan->hif_cs != NULL)
1427 linux_wlan_deinit_mutex(&g_linux_wlan->hif_cs);
1429 if (&g_linux_wlan->rxq_cs != NULL)
1430 linux_wlan_deinit_mutex(&g_linux_wlan->rxq_cs);
1432 if (&g_linux_wlan->txq_cs != NULL)
1433 linux_wlan_deinit_mutex(&g_linux_wlan->txq_cs);
1435 /*Added by Amr - BugID_4720*/
1436 if (&g_linux_wlan->txq_spinlock != NULL)
1437 linux_wlan_deinit_spin_lock(&g_linux_wlan->txq_spinlock);
1439 if (&g_linux_wlan->rxq_event != NULL)
1440 linux_wlan_deinit_lock(&g_linux_wlan->rxq_event);
1442 if (&g_linux_wlan->txq_event != NULL)
1443 linux_wlan_deinit_lock(&g_linux_wlan->txq_event);
1445 /*Added by Amr - BugID_4720*/
1446 if (&g_linux_wlan->txq_add_to_head_cs != NULL)
1447 linux_wlan_deinit_lock(&g_linux_wlan->txq_add_to_head_cs);
1449 if (&g_linux_wlan->rxq_thread_started != NULL)
1450 linux_wlan_deinit_lock(&g_linux_wlan->rxq_thread_started);
1452 if (&g_linux_wlan->txq_thread_started != NULL)
1453 linux_wlan_deinit_lock(&g_linux_wlan->txq_thread_started);
1455 if (&g_linux_wlan->cfg_event != NULL)
1456 linux_wlan_deinit_lock(&g_linux_wlan->cfg_event);
1458 if (&g_linux_wlan->sync_event != NULL)
1459 linux_wlan_deinit_lock(&g_linux_wlan->sync_event);
1463 void linux_to_wlan(wilc_wlan_inp_t *nwi, linux_wlan_t *nic)
1466 PRINT_D(INIT_DBG, "Linux to Wlan services ...\n");
1468 nwi->os_context.hif_critical_section = (void *)&g_linux_wlan->hif_cs;
1469 nwi->os_context.os_private = (void *)nic;
1470 nwi->os_context.tx_buffer_size = LINUX_TX_SIZE;
1471 nwi->os_context.txq_critical_section = (void *)&g_linux_wlan->txq_cs;
1473 /*Added by Amr - BugID_4720*/
1474 nwi->os_context.txq_add_to_head_critical_section = (void *)&g_linux_wlan->txq_add_to_head_cs;
1476 /*Added by Amr - BugID_4720*/
1477 nwi->os_context.txq_spin_lock = (void *)&g_linux_wlan->txq_spinlock;
1479 nwi->os_context.txq_wait_event = (void *)&g_linux_wlan->txq_event;
1481 #if defined(MEMORY_STATIC)
1482 nwi->os_context.rx_buffer_size = LINUX_RX_SIZE;
1484 nwi->os_context.rxq_critical_section = (void *)&g_linux_wlan->rxq_cs;
1485 nwi->os_context.rxq_wait_event = (void *)&g_linux_wlan->rxq_event;
1486 nwi->os_context.cfg_wait_event = (void *)&g_linux_wlan->cfg_event;
1488 nwi->os_func.os_sleep = linux_wlan_msleep;
1489 nwi->os_func.os_atomic_sleep = linux_wlan_atomic_msleep;
1490 nwi->os_func.os_debug = linux_wlan_dbg;
1491 nwi->os_func.os_malloc = linux_wlan_malloc;
1492 nwi->os_func.os_malloc_atomic = linux_wlan_malloc_atomic;
1493 nwi->os_func.os_free = linux_wlan_free;
1494 nwi->os_func.os_lock = linux_wlan_lock;
1495 nwi->os_func.os_unlock = linux_wlan_unlock;
1496 nwi->os_func.os_wait = linux_wlan_lock_timeout;
1497 nwi->os_func.os_signal = linux_wlan_unlock;
1498 nwi->os_func.os_enter_cs = linux_wlan_lock_mutex;
1499 nwi->os_func.os_leave_cs = linux_wlan_unlock_mutex;
1501 /*Added by Amr - BugID_4720*/
1502 nwi->os_func.os_spin_lock = linux_wlan_spin_lock;
1503 nwi->os_func.os_spin_unlock = linux_wlan_spin_unlock;
1506 nwi->io_func.io_type = HIF_SDIO;
1507 nwi->io_func.io_init = linux_sdio_init;
1508 nwi->io_func.io_deinit = linux_sdio_deinit;
1509 nwi->io_func.u.sdio.sdio_cmd52 = linux_sdio_cmd52;
1510 nwi->io_func.u.sdio.sdio_cmd53 = linux_sdio_cmd53;
1511 nwi->io_func.u.sdio.sdio_set_max_speed = linux_sdio_set_max_speed;
1512 nwi->io_func.u.sdio.sdio_set_default_speed = linux_sdio_set_default_speed;
1514 nwi->io_func.io_type = HIF_SPI;
1515 nwi->io_func.io_init = linux_spi_init;
1516 nwi->io_func.io_deinit = linux_spi_deinit;
1517 nwi->io_func.u.spi.spi_tx = linux_spi_write;
1518 nwi->io_func.u.spi.spi_rx = linux_spi_read;
1519 nwi->io_func.u.spi.spi_trx = linux_spi_write_read;
1520 nwi->io_func.u.spi.spi_max_speed = linux_spi_set_max_speed;
1523 /*for now - to be revised*/
1524 #ifdef WILC_FULLY_HOSTING_AP
1525 /* incase of Fully hosted AP, all non cfg pkts are processed here*/
1526 nwi->net_func.rx_indicate = WILC_Process_rx_frame;
1528 nwi->net_func.rx_indicate = frmw_to_linux;
1530 nwi->net_func.rx_complete = linux_wlan_rx_complete;
1531 nwi->indicate_func.mac_indicate = linux_wlan_mac_indicate;
1534 int wlan_initialize_threads(perInterface_wlan_t *nic)
1538 PRINT_D(INIT_DBG, "Initializing Threads ...\n");
1540 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
1541 /*Initialize rx work queue task*/
1542 INIT_WORK(&g_linux_wlan->rx_work_queue, isr_bh_routine);
1543 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
1544 PRINT_D(INIT_DBG, "Creating kthread for Rxq BH\n");
1545 g_linux_wlan->rx_bh_thread = kthread_run(isr_bh_routine, (void *)g_linux_wlan, "K_RXQ_BH");
1546 if (g_linux_wlan->rx_bh_thread == 0) {
1547 PRINT_ER("couldn't create RX BH thread\n");
1553 #ifndef TCP_ENHANCEMENTS
1554 /* create rx task */
1555 PRINT_D(INIT_DBG, "Creating kthread for reception\n");
1556 g_linux_wlan->rxq_thread = kthread_run(linux_wlan_rxq_task, (void *)g_linux_wlan, "K_RXQ_TASK");
1557 if (g_linux_wlan->rxq_thread == 0) {
1558 PRINT_ER("couldn't create RXQ thread\n");
1563 /* wait for RXQ task to start. */
1564 linux_wlan_lock(&g_linux_wlan->rxq_thread_started);
1568 /* create tx task */
1569 PRINT_D(INIT_DBG, "Creating kthread for transmission\n");
1570 g_linux_wlan->txq_thread = kthread_run(linux_wlan_txq_task, (void *)g_linux_wlan, "K_TXQ_TASK");
1571 if (g_linux_wlan->txq_thread == 0) {
1572 PRINT_ER("couldn't create TXQ thread\n");
1577 PRINT_D(INIT_DBG, "Creating kthread for Debugging\n");
1578 g_linux_wlan->txq_thread = kthread_run(DebuggingThreadTask, (void *)g_linux_wlan, "DebugThread");
1579 if (g_linux_wlan->txq_thread == 0) {
1580 PRINT_ER("couldn't create TXQ thread\n");
1585 /* wait for TXQ task to start. */
1586 linux_wlan_lock(&g_linux_wlan->txq_thread_started);
1591 /*De-Initialize 2nd thread*/
1592 g_linux_wlan->close = 1;
1593 linux_wlan_unlock(&g_linux_wlan->rxq_event);
1594 kthread_stop(g_linux_wlan->rxq_thread);
1596 #ifndef TCP_ENHANCEMENTS
1599 #if (RX_BH_TYPE == RX_BH_KTHREAD)
1600 /*De-Initialize 1st thread*/
1601 g_linux_wlan->close = 1;
1602 linux_wlan_unlock(&g_linux_wlan->rx_sem);
1603 kthread_stop(g_linux_wlan->rx_bh_thread);
1606 g_linux_wlan->close = 0;
1610 static void wlan_deinitialize_threads(linux_wlan_t *nic)
1613 g_linux_wlan->close = 1;
1614 PRINT_D(INIT_DBG, "Deinitializing Threads\n");
1615 if (&g_linux_wlan->rxq_event != NULL)
1616 linux_wlan_unlock(&g_linux_wlan->rxq_event);
1618 if (g_linux_wlan->rxq_thread != NULL) {
1619 kthread_stop(g_linux_wlan->rxq_thread);
1620 g_linux_wlan->rxq_thread = NULL;
1623 if (&g_linux_wlan->txq_event != NULL)
1624 linux_wlan_unlock(&g_linux_wlan->txq_event);
1626 if (g_linux_wlan->txq_thread != NULL) {
1627 kthread_stop(g_linux_wlan->txq_thread);
1628 g_linux_wlan->txq_thread = NULL;
1631 #if (RX_BH_TYPE == RX_BH_KTHREAD)
1632 if (&g_linux_wlan->rx_sem != NULL)
1633 linux_wlan_unlock(&g_linux_wlan->rx_sem);
1635 if (g_linux_wlan->rx_bh_thread != NULL) {
1636 kthread_stop(g_linux_wlan->rx_bh_thread);
1637 g_linux_wlan->rx_bh_thread = NULL;
1642 #ifdef STATIC_MACADDRESS
1643 const char *path_string[] = {
1648 static int linux_wlan_read_mac_addr(void *vp)
1651 struct file *fp = (struct file *)-ENOENT;
1652 mm_segment_t old_fs;
1655 int array_size = ARRAY_SIZE(path_string);
1657 /* change to KERNEL_DS address limit */
1661 for (index = 0; index < array_size; index++) {
1662 fp = filp_open(path_string[index], O_WRONLY, 0640);
1668 /*No such file or directory */
1669 if (IS_ERR(fp) || !fp->f_op) {
1670 get_random_bytes(&mac_add[3], 3);
1671 /* open file to write */
1672 fp = filp_open(path_string[index], O_WRONLY | O_CREAT, 0640);
1674 if (!fp || IS_ERR(fp)) {
1678 /* write buf to file */
1679 fp->f_op->write(fp, mac_add, 6, &pos);
1683 /* read file to buf */
1684 fp->f_op->read(fp, mac_add, 6, &pos);
1689 if (index == array_size)
1690 PRINT_ER("random MAC\n");
1693 if (fp && !IS_ERR(fp))
1694 filp_close(fp, NULL);
1702 #ifdef COMPLEMENT_BOOT
1704 extern volatile int probe;
1705 extern uint8_t core_11b_ready(void);
1707 #define READY_CHECK_THRESHOLD 30
1708 extern void wilc_wlan_global_reset(void);
1709 uint8_t wilc1000_prepare_11b_core(wilc_wlan_inp_t *nwi, wilc_wlan_oup_t *nwo, linux_wlan_t *nic)
1712 while ((core_11b_ready() && (READY_CHECK_THRESHOLD > (trials++)))) {
1713 PRINT_D(INIT_DBG, "11b core not ready yet: %u\n", trials);
1714 wilc_wlan_deinit(nic);
1715 wilc_wlan_global_reset();
1716 sdio_unregister_driver(&wilc_bus);
1718 linux_wlan_device_detection(0);
1722 linux_wlan_device_detection(1);
1724 sdio_register_driver(&wilc_bus);
1729 g_linux_wlan->wilc_sdio_func = local_sdio_func;
1730 linux_to_wlan(nwi, nic);
1731 wilc_wlan_init(nwi, nwo);
1734 if (READY_CHECK_THRESHOLD <= trials)
1741 int repeat_power_cycle(perInterface_wlan_t *nic)
1744 wilc_wlan_inp_t nwi;
1745 wilc_wlan_oup_t nwo;
1746 sdio_unregister_driver(&wilc_bus);
1748 linux_wlan_device_detection(0);
1749 linux_wlan_device_power(0);
1751 linux_wlan_device_power(1);
1753 linux_wlan_device_detection(1);
1756 sdio_register_driver(&wilc_bus);
1762 g_linux_wlan->wilc_sdio_func = local_sdio_func;
1763 linux_to_wlan(&nwi, g_linux_wlan);
1764 ret = wilc_wlan_init(&nwi, &nwo);
1766 g_linux_wlan->mac_status = WILC_MAC_STATUS_INIT;
1767 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1768 enable_sdio_interrupt();
1771 if (linux_wlan_get_firmware(nic)) {
1772 PRINT_ER("Can't get firmware\n");
1777 /*Download firmware*/
1778 ret = linux_wlan_firmware_download(g_linux_wlan);
1780 PRINT_ER("Failed to download firmware\n");
1784 ret = linux_wlan_start_firmware(nic);
1786 PRINT_ER("Failed to start firmware\n");
1792 int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
1794 wilc_wlan_inp_t nwi;
1795 wilc_wlan_oup_t nwo;
1796 perInterface_wlan_t *nic = p_nic;
1799 if (!g_linux_wlan->wilc1000_initialized) {
1800 g_linux_wlan->mac_status = WILC_MAC_STATUS_INIT;
1801 g_linux_wlan->close = 0;
1802 g_linux_wlan->wilc1000_initialized = 0;
1804 wlan_init_locks(g_linux_wlan);
1806 #ifdef STATIC_MACADDRESS
1807 wilc_mac_thread = kthread_run(linux_wlan_read_mac_addr, NULL, "wilc_mac_thread");
1808 if (wilc_mac_thread < 0)
1809 PRINT_ER("couldn't create Mac addr thread\n");
1812 linux_to_wlan(&nwi, g_linux_wlan);
1814 ret = wilc_wlan_init(&nwi, &nwo);
1816 PRINT_ER("Initializing WILC_Wlan FAILED\n");
1820 memcpy(&g_linux_wlan->oup, &nwo, sizeof(wilc_wlan_oup_t));
1822 /*Save the oup structre into global pointer*/
1823 gpstrWlanOps = &g_linux_wlan->oup;
1825 ret = wlan_initialize_threads(nic);
1827 PRINT_ER("Initializing Threads FAILED\n");
1829 goto _fail_wilc_wlan_;
1832 #if (defined WILC_SDIO) && (defined COMPLEMENT_BOOT)
1833 if (wilc1000_prepare_11b_core(&nwi, &nwo, g_linux_wlan)) {
1834 PRINT_ER("11b Core is not ready\n");
1836 goto _fail_threads_;
1840 #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
1841 if (init_irq(g_linux_wlan)) {
1842 PRINT_ER("couldn't initialize IRQ\n");
1844 goto _fail_threads_;
1848 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1849 if (enable_sdio_interrupt()) {
1850 PRINT_ER("couldn't initialize IRQ\n");
1852 goto _fail_irq_init_;
1856 if (linux_wlan_get_firmware(nic)) {
1857 PRINT_ER("Can't get firmware\n");
1859 goto _fail_irq_enable_;
1862 /*Download firmware*/
1863 ret = linux_wlan_firmware_download(g_linux_wlan);
1865 PRINT_ER("Failed to download firmware\n");
1867 goto _fail_irq_enable_;
1871 ret = linux_wlan_start_firmware(nic);
1873 PRINT_ER("Failed to start firmware\n");
1875 goto _fail_irq_enable_;
1878 wilc_bus_set_max_speed();
1880 if (g_linux_wlan->oup.wlan_cfg_get(1, WID_FIRMWARE_VERSION, 1, 0)) {
1882 char Firmware_ver[20];
1883 size = g_linux_wlan->oup.wlan_cfg_get_value(
1884 WID_FIRMWARE_VERSION,
1885 Firmware_ver, sizeof(Firmware_ver));
1886 Firmware_ver[size] = '\0';
1887 PRINT_D(INIT_DBG, "***** Firmware Ver = %s *******\n", Firmware_ver);
1889 /* Initialize firmware with default configuration */
1890 ret = linux_wlan_init_test_config(dev, g_linux_wlan);
1893 PRINT_ER("Failed to configure firmware\n");
1895 goto _fail_fw_start_;
1898 g_linux_wlan->wilc1000_initialized = 1;
1899 return 0; /*success*/
1902 if (&g_linux_wlan->oup != NULL) {
1903 if (g_linux_wlan->oup.wlan_stop != NULL)
1904 g_linux_wlan->oup.wlan_stop();
1908 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1909 disable_sdio_interrupt();
1912 #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
1913 deinit_irq(g_linux_wlan);
1917 wlan_deinitialize_threads(g_linux_wlan);
1919 wilc_wlan_deinit(g_linux_wlan);
1921 wlan_deinit_locks(g_linux_wlan);
1922 PRINT_ER("WLAN Iinitialization FAILED\n");
1924 PRINT_D(INIT_DBG, "wilc1000 already initialized\n");
1930 * - this function will be called automatically by OS when module inserted.
1933 #if !defined(NM73131_0_BOARD)
1934 int mac_init_fn(struct net_device *ndev)
1937 /*Why we do this !!!*/
1938 netif_start_queue(ndev); /* ma */
1939 netif_stop_queue(ndev); /* ma */
1944 int mac_init_fn(struct net_device *ndev)
1947 unsigned char mac_add[] = {0x00, 0x50, 0xc2, 0x5e, 0x10, 0x00};
1948 /* TODO: get MAC address whenever the source is EPROM - hardcoded and copy it to ndev*/
1949 memcpy(ndev->dev_addr, mac_add, 6);
1951 if (!is_valid_ether_addr(ndev->dev_addr)) {
1952 PRINT_ER("Error: Wrong MAC address\n");
1960 void WILC_WFI_frame_register(struct wiphy *wiphy, struct net_device *dev,
1961 u16 frame_type, bool reg);
1963 /* This fn is called, when this device is setup using ifconfig */
1964 #if !defined(NM73131_0_BOARD)
1965 int mac_open(struct net_device *ndev)
1967 perInterface_wlan_t *nic;
1970 /*No need for setting mac address here anymore,*/
1971 /*Just set it in init_test_config()*/
1972 unsigned char mac_add[ETH_ALEN] = {0};
1975 struct WILC_WFI_priv *priv;
1977 nic = netdev_priv(ndev);
1978 priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
1979 PRINT_D(INIT_DBG, "MAC OPEN[%p]\n", ndev);
1982 ret = WILC_WFI_InitHostInt(ndev);
1984 PRINT_ER("Failed to initialize host interface\n");
1990 /*initialize platform*/
1991 PRINT_D(INIT_DBG, "*** re-init ***\n");
1992 ret = wilc1000_wlan_init(ndev, nic);
1994 PRINT_ER("Failed to initialize wilc1000\n");
1995 WILC_WFI_DeInitHostInt(ndev);
1999 Set_machw_change_vir_if(false);
2001 host_int_get_MacAddress(priv->hWILCWFIDrv, mac_add);
2002 PRINT_D(INIT_DBG, "Mac address: %x:%x:%x:%x:%x:%x\n", mac_add[0], mac_add[1], mac_add[2],
2003 mac_add[3], mac_add[4], mac_add[5]);
2005 /* loop through the NUM of supported devices and set the MAC address */
2006 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
2007 if (ndev == g_linux_wlan->strInterfaceInfo[i].wilc_netdev) {
2008 memcpy(g_linux_wlan->strInterfaceInfo[i].aSrcAddress, mac_add, ETH_ALEN);
2009 g_linux_wlan->strInterfaceInfo[i].drvHandler = priv->hWILCWFIDrv;
2014 /* TODO: get MAC address whenever the source is EPROM - hardcoded and copy it to ndev*/
2015 memcpy(ndev->dev_addr, g_linux_wlan->strInterfaceInfo[i].aSrcAddress, ETH_ALEN);
2017 if (!is_valid_ether_addr(ndev->dev_addr)) {
2018 PRINT_ER("Error: Wrong MAC address\n");
2023 WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev,
2024 nic->g_struct_frame_reg[0].frame_type, nic->g_struct_frame_reg[0].reg);
2025 WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev,
2026 nic->g_struct_frame_reg[1].frame_type, nic->g_struct_frame_reg[1].reg);
2027 netif_wake_queue(ndev);
2028 g_linux_wlan->open_ifcs++;
2029 nic->mac_opened = 1;
2033 WILC_WFI_DeInitHostInt(ndev);
2034 wilc1000_wlan_deinit(g_linux_wlan);
2038 int mac_open(struct net_device *ndev)
2042 nic = netdev_priv(ndev);
2044 /*initialize platform*/
2045 if (wilc1000_wlan_init(nic)) {
2046 PRINT_ER("Failed to initialize platform\n");
2049 /* Start the network interface queue for this device */
2050 PRINT_D(INIT_DBG, "Starting netifQ\n");
2051 netif_start_queue(ndev);
2052 /* linux_wlan_lock(&close_exit_sync); */
2057 struct net_device_stats *mac_stats(struct net_device *dev)
2059 perInterface_wlan_t *nic = netdev_priv(dev);
2061 return &nic->netstats;
2064 /* Setup the multicast filter */
2065 static void wilc_set_multicast_list(struct net_device *dev)
2068 struct netdev_hw_addr *ha;
2069 struct WILC_WFI_priv *priv;
2070 tstrWILC_WFIDrv *pstrWFIDrv;
2072 priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
2073 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
2078 PRINT_D(INIT_DBG, "Setting Multicast List with count = %d.\n", dev->mc.count);
2080 if (dev->flags & IFF_PROMISC) {
2081 /* Normally, we should configure the chip to retrive all packets
2082 * but we don't wanna support this right now */
2083 /* TODO: add promiscuous mode support */
2084 PRINT_D(INIT_DBG, "Set promiscuous mode ON, retrive all packets\n");
2088 /* If there's more addresses than we handle, get all multicast
2089 * packets and sort them out in software. */
2090 if ((dev->flags & IFF_ALLMULTI) || (dev->mc.count) > WILC_MULTICAST_TABLE_SIZE) {
2091 PRINT_D(INIT_DBG, "Disable multicast filter, retrive all multicast packets\n");
2092 /* get all multicast packets */
2093 host_int_setup_multicast_filter(pstrWFIDrv, false, 0);
2097 /* No multicast? Just get our own stuff */
2098 if ((dev->mc.count) == 0) {
2099 PRINT_D(INIT_DBG, "Enable multicast filter, retrive directed packets only.\n");
2100 host_int_setup_multicast_filter(pstrWFIDrv, true, 0);
2104 /* Store all of the multicast addresses in the hardware filter */
2105 netdev_for_each_mc_addr(ha, dev)
2107 memcpy(gau8MulticastMacAddrList[i], ha->addr, ETH_ALEN);
2108 PRINT_D(INIT_DBG, "Entry[%d]: %x:%x:%x:%x:%x:%x\n", i,
2109 gau8MulticastMacAddrList[i][0], gau8MulticastMacAddrList[i][1], gau8MulticastMacAddrList[i][2], gau8MulticastMacAddrList[i][3], gau8MulticastMacAddrList[i][4], gau8MulticastMacAddrList[i][5]);
2113 host_int_setup_multicast_filter(pstrWFIDrv, true, (dev->mc.count));
2119 static void linux_wlan_tx_complete(void *priv, int status)
2122 struct tx_complete_data *pv_data = (struct tx_complete_data *)priv;
2124 PRINT_D(TX_DBG, "Packet sent successfully - Size = %d - Address = %p - SKB = %p\n", pv_data->size, pv_data->buff, pv_data->skb);
2126 PRINT_D(TX_DBG, "Couldn't send packet - Size = %d - Address = %p - SKB = %p\n", pv_data->size, pv_data->buff, pv_data->skb);
2127 /* Free the SK Buffer, its work is done */
2128 dev_kfree_skb(pv_data->skb);
2129 linux_wlan_free(pv_data);
2132 int mac_xmit(struct sk_buff *skb, struct net_device *ndev)
2134 perInterface_wlan_t *nic;
2135 struct tx_complete_data *tx_data = NULL;
2139 struct ethhdr *eth_h;
2140 nic = netdev_priv(ndev);
2142 PRINT_D(INT_DBG, "\n========\n IntUH: %d - IntBH: %d - IntCld: %d\n========\n", int_rcvdU, int_rcvdB, int_clrd);
2143 PRINT_D(TX_DBG, "Sending packet just received from TCP/IP\n");
2145 /* Stop the network interface queue */
2146 if (skb->dev != ndev) {
2147 PRINT_ER("Packet not destined to this device\n");
2151 tx_data = (struct tx_complete_data *)internal_alloc(sizeof(struct tx_complete_data), GFP_ATOMIC);
2152 if (tx_data == NULL) {
2153 PRINT_ER("Failed to allocate memory for tx_data structure\n");
2155 netif_wake_queue(ndev);
2159 tx_data->buff = skb->data;
2160 tx_data->size = skb->len;
2163 eth_h = (struct ethhdr *)(skb->data);
2164 if (eth_h->h_proto == 0x8e88)
2165 PRINT_D(INIT_DBG, "EAPOL transmitted\n");
2167 /*get source and dest ip addresses*/
2168 ih = (struct iphdr *)(skb->data + sizeof(struct ethhdr));
2170 pu8UdpBuffer = (char *)ih + sizeof(struct iphdr);
2171 if ((pu8UdpBuffer[1] == 68 && pu8UdpBuffer[3] == 67) || (pu8UdpBuffer[1] == 67 && pu8UdpBuffer[3] == 68))
2172 PRINT_D(GENERIC_DBG, "DHCP Message transmitted, type:%x %x %x\n", pu8UdpBuffer[248], pu8UdpBuffer[249], pu8UdpBuffer[250]);
2174 PRINT_D(TX_DBG, "Sending packet - Size = %d - Address = %p - SKB = %p\n", tx_data->size, tx_data->buff, tx_data->skb);
2176 /* Send packet to MAC HW - for now the tx_complete function will be just status
2177 * indicator. still not sure if I need to suspend host transmission till the tx_complete
2178 * function called or not?
2179 * allocated buffer will be freed in tx_complete function.
2181 PRINT_D(TX_DBG, "Adding tx packet to TX Queue\n");
2182 nic->netstats.tx_packets++;
2183 nic->netstats.tx_bytes += tx_data->size;
2184 tx_data->pBssid = g_linux_wlan->strInterfaceInfo[nic->u8IfIdx].aBSSID;
2185 #ifndef WILC_FULLY_HOSTING_AP
2186 QueueCount = g_linux_wlan->oup.wlan_add_to_tx_que((void *)tx_data,
2189 linux_wlan_tx_complete);
2191 QueueCount = WILC_Xmit_data((void *)tx_data, HOST_TO_WLAN);
2192 #endif /* WILC_FULLY_HOSTING_AP */
2194 if (QueueCount > FLOW_CONTROL_UPPER_THRESHOLD) {
2195 netif_stop_queue(g_linux_wlan->strInterfaceInfo[0].wilc_netdev);
2196 netif_stop_queue(g_linux_wlan->strInterfaceInfo[1].wilc_netdev);
2202 int mac_close(struct net_device *ndev)
2204 struct WILC_WFI_priv *priv;
2205 perInterface_wlan_t *nic;
2206 tstrWILC_WFIDrv *pstrWFIDrv;
2208 nic = netdev_priv(ndev);
2210 if ((nic == NULL) || (nic->wilc_netdev == NULL) || (nic->wilc_netdev->ieee80211_ptr == NULL) || (nic->wilc_netdev->ieee80211_ptr->wiphy == NULL)) {
2211 PRINT_ER("nic = NULL\n");
2215 priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
2218 PRINT_ER("priv = NULL\n");
2222 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
2224 PRINT_D(GENERIC_DBG, "Mac close\n");
2226 if (g_linux_wlan == NULL) {
2227 PRINT_ER("g_linux_wlan = NULL\n");
2231 if (pstrWFIDrv == NULL) {
2232 PRINT_ER("pstrWFIDrv = NULL\n");
2236 if ((g_linux_wlan->open_ifcs) > 0) {
2237 g_linux_wlan->open_ifcs--;
2239 PRINT_ER("ERROR: MAC close called while number of opened interfaces is zero\n");
2243 if (nic->wilc_netdev != NULL) {
2244 /* Stop the network interface queue */
2245 netif_stop_queue(nic->wilc_netdev);
2248 WILC_WFI_DeInitHostInt(nic->wilc_netdev);
2252 if (g_linux_wlan->open_ifcs == 0) {
2253 PRINT_D(GENERIC_DBG, "Deinitializing wilc1000\n");
2254 g_linux_wlan->close = 1;
2255 wilc1000_wlan_deinit(g_linux_wlan);
2257 #ifdef WILC_AP_EXTERNAL_MLME
2258 WILC_WFI_deinit_mon_interface();
2263 linux_wlan_unlock(&close_exit_sync);
2264 nic->mac_opened = 0;
2269 int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
2274 u32 size = 0, length = 0;
2275 perInterface_wlan_t *nic;
2276 struct WILC_WFI_priv *priv;
2277 s32 s32Error = WILC_SUCCESS;
2279 /* struct iwreq *wrq = (struct iwreq *) req; // tony moved to case SIOCSIWPRIV */
2281 nic = netdev_priv(ndev);
2283 if (!g_linux_wlan->wilc1000_initialized)
2293 struct iwreq *wrq = (struct iwreq *) req; /* added by tony */
2295 size = wrq->u.data.length;
2297 if (size && wrq->u.data.pointer) {
2299 buff = memdup_user(wrq->u.data.pointer, wrq->u.data.length);
2301 s32Error = PTR_ERR(buff);
2305 if (strncasecmp(buff, "RSSI", length) == 0) {
2308 priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
2309 s32Error = host_int_get_rssi(priv->hWILCWFIDrv, &(rssi));
2311 PRINT_ER("Failed to send get rssi param's message queue ");
2313 PRINT_INFO(GENERIC_DBG, "RSSI :%d\n", rssi);
2315 /*Rounding up the rssi negative value*/
2318 snprintf(buff, size, "rssi %d", rssi);
2320 if (copy_to_user(wrq->u.data.pointer, buff, size)) {
2321 PRINT_ER("%s: failed to copy data to user buffer\n", __func__);
2332 PRINT_INFO(GENERIC_DBG, "Command - %d - has been received\n", cmd);
2333 s32Error = -EOPNOTSUPP;
2345 void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset)
2348 unsigned int frame_len = 0;
2350 unsigned char *buff_to_send = NULL;
2351 struct sk_buff *skb;
2352 #ifndef TCP_ENHANCEMENTS
2356 struct net_device *wilc_netdev;
2357 perInterface_wlan_t *nic;
2359 wilc_netdev = GetIfHandler(buff);
2360 if (wilc_netdev == NULL)
2364 nic = netdev_priv(wilc_netdev);
2369 buff_to_send = buff;
2371 /* Need to send the packet up to the host, allocate a skb buffer */
2372 skb = dev_alloc_skb(frame_len);
2374 PRINT_ER("Low memory - packet droped\n");
2378 skb_reserve(skb, (unsigned int)skb->data & 0x3);
2380 if (g_linux_wlan == NULL || wilc_netdev == NULL)
2381 PRINT_ER("wilc_netdev in g_linux_wlan is NULL");
2382 skb->dev = wilc_netdev;
2384 if (skb->dev == NULL)
2385 PRINT_ER("skb->dev is NULL\n");
2391 * WILC_PRINTF("buff_to_send[%d]=%2x\n",i,buff_to_send[i]);
2395 /* skb_put(skb, frame_len); */
2396 memcpy(skb_put(skb, frame_len), buff_to_send, frame_len);
2398 /* WILC_PRINTF("After MEM_CPY\n"); */
2400 /* nic = netdev_priv(wilc_netdev); */
2403 /* if(nic->monitor_flag)
2405 * WILC_WFI_monitor_rx(nic->wilc_netdev,skb);
2409 skb->protocol = eth_type_trans(skb, wilc_netdev);
2410 #ifndef TCP_ENHANCEMENTS
2411 /*get source and dest ip addresses*/
2412 ih = (struct iphdr *)(skb->data + sizeof(struct ethhdr));
2414 pu8UdpBuffer = (char *)ih + sizeof(struct iphdr);
2415 if (buff_to_send[35] == 67 && buff_to_send[37] == 68)
2416 PRINT_D(RX_DBG, "DHCP Message received\n");
2417 if (buff_to_send[12] == 0x88 && buff_to_send[13] == 0x8e)
2418 PRINT_D(GENERIC_DBG, "eapol received\n");
2420 /* Send the packet to the stack by giving it to the bridge */
2421 nic->netstats.rx_packets++;
2422 nic->netstats.rx_bytes += frame_len;
2423 skb->ip_summed = CHECKSUM_UNNECESSARY;
2424 stats = netif_rx(skb);
2425 PRINT_D(RX_DBG, "netif_rx ret value is: %d\n", stats);
2427 #ifndef TCP_ENHANCEMENTS
2429 PRINT_ER("Discard sending packet with len = %d\n", size);
2433 void WILC_WFI_mgmt_rx(uint8_t *buff, uint32_t size)
2436 perInterface_wlan_t *nic;
2439 /*Pass the frame on the monitor interface, if any.*/
2440 /*Otherwise, pass it on p2p0 netdev, if registered on it*/
2441 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
2442 nic = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2443 if (nic->monitor_flag) {
2444 WILC_WFI_monitor_rx(buff, size);
2450 nic = netdev_priv(g_linux_wlan->strInterfaceInfo[1].wilc_netdev); /* p2p0 */
2451 if ((buff[0] == nic->g_struct_frame_reg[0].frame_type && nic->g_struct_frame_reg[0].reg) ||
2452 (buff[0] == nic->g_struct_frame_reg[1].frame_type && nic->g_struct_frame_reg[1].reg))
2453 WILC_WFI_p2p_rx(g_linux_wlan->strInterfaceInfo[1].wilc_netdev, buff, size);
2457 int wilc_netdev_init(void)
2461 perInterface_wlan_t *nic;
2462 struct net_device *ndev;
2464 linux_wlan_init_lock("close_exit_sync", &close_exit_sync, 0);
2466 /*create the common structure*/
2467 g_linux_wlan = WILC_MALLOC(sizeof(linux_wlan_t));
2468 memset(g_linux_wlan, 0, sizeof(linux_wlan_t));
2470 /*Reset interrupt count debug*/
2474 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
2475 register_inetaddr_notifier(&g_dev_notifier);
2478 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
2479 /*allocate first ethernet device with perinterface_wlan_t as its private data*/
2480 ndev = alloc_etherdev(sizeof(perInterface_wlan_t));
2482 PRINT_ER("Failed to allocate ethernet dev\n");
2486 nic = netdev_priv(ndev);
2487 memset(nic, 0, sizeof(perInterface_wlan_t));
2489 /*Name the Devices*/
2491 #if defined(NM73131) /* tony, 2012-09-20 */
2492 strcpy(ndev->name, "wilc_eth%d");
2493 #elif defined(PLAT_CLM9722) /* rachel */
2494 strcpy(ndev->name, "eth%d");
2495 #else /* PANDA_BOARD, PLAT_ALLWINNER_A10, PLAT_ALLWINNER_A20, PLAT_ALLWINNER_A31, PLAT_AML8726_M3 or PLAT_WMS8304 */
2496 strcpy(ndev->name, "wlan%d");
2499 strcpy(ndev->name, "p2p%d");
2501 nic->u8IfIdx = g_linux_wlan->u8NoIfcs;
2502 nic->wilc_netdev = ndev;
2503 g_linux_wlan->strInterfaceInfo[g_linux_wlan->u8NoIfcs].wilc_netdev = ndev;
2504 g_linux_wlan->u8NoIfcs++;
2505 ndev->netdev_ops = &wilc_netdev_ops;
2509 struct wireless_dev *wdev;
2511 wdev = WILC_WFI_WiphyRegister(ndev);
2514 /* set netdev, tony */
2515 SET_NETDEV_DEV(ndev, &local_sdio_func->dev);
2519 PRINT_ER("Can't register WILC Wiphy\n");
2523 /*linking the wireless_dev structure with the netdevice*/
2524 nic->wilc_netdev->ieee80211_ptr = wdev;
2525 nic->wilc_netdev->ml_priv = nic;
2526 wdev->netdev = nic->wilc_netdev;
2527 nic->netstats.rx_packets = 0;
2528 nic->netstats.tx_packets = 0;
2529 nic->netstats.rx_bytes = 0;
2530 nic->netstats.tx_bytes = 0;
2535 if (register_netdev(ndev)) {
2536 PRINT_ER("Device couldn't be registered - %s\n", ndev->name);
2537 return -1; /* ERROR */
2540 nic->iftype = STATION_MODE;
2541 nic->mac_opened = 0;
2546 if (!linux_spi_init(&g_linux_wlan->wilc_spidev)) {
2547 PRINT_ER("Can't initialize SPI\n");
2548 return -1; /* ERROR */
2550 g_linux_wlan->wilc_spidev = wilc_spi_dev;
2552 g_linux_wlan->wilc_sdio_func = local_sdio_func;
2558 /*The 1st function called after module inserted*/
2559 static int __init init_wilc_driver(void)
2561 #if defined(WILC_DEBUGFS)
2562 if (wilc_debugfs_init() < 0) {
2563 PRINT_D(GENERIC_DBG, "fail to create debugfs for wilc driver\n");
2568 printk("IN INIT FUNCTION\n");
2569 printk("*** WILC1000 driver VERSION=[10.2] FW_VER=[10.2] ***\n");
2571 linux_wlan_device_power(1);
2573 linux_wlan_device_detection(1);
2579 ret = sdio_register_driver(&wilc_bus);
2581 PRINT_D(INIT_DBG, "init_wilc_driver: Failed register sdio driver\n");
2586 PRINT_D(INIT_DBG, "Initializing netdev\n");
2587 if (wilc_netdev_init())
2588 PRINT_ER("Couldn't initialize netdev\n");
2592 late_initcall(init_wilc_driver);
2594 static void __exit exit_wilc_driver(void)
2597 perInterface_wlan_t *nic[NUM_CONCURRENT_IFC] = {NULL,};
2598 #define CLOSE_TIMEOUT (12 * 1000)
2600 if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL)
2601 || ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) {
2602 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
2603 unregister_inetaddr_notifier(&g_dev_notifier);
2606 for (i = 0; i < NUM_CONCURRENT_IFC; i++)
2607 nic[i] = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2610 if ((g_linux_wlan != NULL) && g_linux_wlan->wilc_firmware != NULL) {
2611 release_firmware(g_linux_wlan->wilc_firmware);
2612 g_linux_wlan->wilc_firmware = NULL;
2615 if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL)
2616 || ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) {
2617 PRINT_D(INIT_DBG, "Waiting for mac_close ....\n");
2619 if (linux_wlan_lock_timeout(&close_exit_sync, CLOSE_TIMEOUT) < 0)
2620 PRINT_D(INIT_DBG, "Closed TimedOUT\n");
2622 PRINT_D(INIT_DBG, "mac_closed\n");
2624 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
2625 /* close all opened interfaces */
2626 if (g_linux_wlan->strInterfaceInfo[i].wilc_netdev != NULL) {
2627 if (nic[i]->mac_opened)
2628 mac_close(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2631 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
2632 PRINT_D(INIT_DBG, "Unregistering netdev %p\n", g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2633 unregister_netdev(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2635 PRINT_D(INIT_DBG, "Freeing Wiphy...\n");
2636 WILC_WFI_WiphyFree(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2638 PRINT_D(INIT_DBG, "Freeing netdev...\n");
2639 free_netdev(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2644 #ifdef WILC_AP_EXTERNAL_MLME
2645 /* Bug 4600 : WILC_WFI_deinit_mon_interface was already called at mac_close */
2646 /* WILC_WFI_deinit_mon_interface(); */
2650 /* if(g_linux_wlan->open_ifcs==0) */
2653 PRINT_D(INIT_DBG, "SPI unregsiter...\n");
2654 spi_unregister_driver(&wilc_bus);
2656 PRINT_D(INIT_DBG, "SDIO unregsiter...\n");
2657 sdio_unregister_driver(&wilc_bus);
2660 linux_wlan_deinit_lock(&close_exit_sync);
2661 if (g_linux_wlan != NULL) {
2662 kfree(g_linux_wlan);
2663 g_linux_wlan = NULL;
2665 printk("Module_exit Done.\n");
2667 #if defined(WILC_DEBUGFS)
2668 wilc_debugfs_remove();
2671 linux_wlan_device_detection(0);
2672 linux_wlan_device_power(0);
2675 module_exit(exit_wilc_driver);
2677 MODULE_LICENSE("GPL");