drivers/video/fbdev/omap2/dss/hdmi_phy.c

   1 /*
   2  * HDMI PHY
   3  *
   4  * Copyright (C) 2013 Texas Instruments Incorporated
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License version 2 as published by
   8  * the Free Software Foundation.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/err.h>
  13 #include <linux/io.h>
  14 #include <linux/platform_device.h>
  15 #include <video/omapdss.h>
  16
  17 #include "dss.h"
  18 #include "hdmi.h"
  19
  20 void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
  21 {
  22 #define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
  23                 hdmi_read_reg(phy->base, r))
  24
  25         DUMPPHY(HDMI_TXPHY_TX_CTRL);
  26         DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
  27         DUMPPHY(HDMI_TXPHY_POWER_CTRL);
  28         DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
  29 }
  30
  31 static irqreturn_t hdmi_irq_handler(int irq, void *data)
  32 {
  33         struct hdmi_wp_data *wp = data;
  34         u32 irqstatus;
  35
  36         irqstatus = hdmi_wp_get_irqstatus(wp);
  37         hdmi_wp_set_irqstatus(wp, irqstatus);
  38
  39         if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
  40                         irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
  41                 /*
  42                  * If we get both connect and disconnect interrupts at the same
  43                  * time, turn off the PHY, clear interrupts, and restart, which
  44                  * raises connect interrupt if a cable is connected, or nothing
  45                  * if cable is not connected.
  46                  */
  47                 hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
  48
  49                 hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
  50                                 HDMI_IRQ_LINK_DISCONNECT);
  51
  52                 hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
  53         } else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
  54                 hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
  55         } else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
  56                 hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
  57         }
  58
  59         return IRQ_HANDLED;
  60 }
  61
  62 int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
  63                         struct hdmi_config *cfg)
  64 {
  65         u16 r = 0;
  66         u32 irqstatus;
  67
  68         hdmi_wp_clear_irqenable(wp, 0xffffffff);
  69
  70         irqstatus = hdmi_wp_get_irqstatus(wp);
  71         hdmi_wp_set_irqstatus(wp, irqstatus);
  72
  73         r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
  74         if (r)
  75                 return r;
  76
  77         /*
  78          * Read address 0 in order to get the SCP reset done completed
  79          * Dummy access performed to make sure reset is done
  80          */
  81         hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
  82
  83         /*
  84          * Write to phy address 0 to configure the clock
  85          * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
  86          */
  87         REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
  88
  89         /* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
  90         hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
  91
  92         /* Setup max LDO voltage */
  93         REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
  94
  95         /* Write to phy address 3 to change the polarity control */
  96         REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
  97
  98         r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler,
  99                                 IRQF_ONESHOT, "OMAP HDMI", wp);
 100         if (r) {
 101                 DSSERR("HDMI IRQ request failed\n");
 102                 hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
 103                 return r;
 104         }
 105
 106         hdmi_wp_set_irqenable(wp,
 107                 HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
 108
 109         return 0;
 110 }
 111
 112 void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp)
 113 {
 114         free_irq(phy->irq, wp);
 115
 116         hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
 117 }
 118
 119 #define PHY_OFFSET      0x300
 120 #define PHY_SIZE        0x100
 121
 122 int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
 123 {
 124         struct resource *res;
 125         struct resource temp_res;
 126
 127         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
 128         if (!res) {
 129                 DSSDBG("can't get PHY mem resource by name\n");
 130                 /*
 131                  * if hwmod/DT doesn't have the memory resource information
 132                  * split into HDMI sub blocks by name, we try again by getting
 133                  * the platform's first resource. this code will be removed when
 134                  * the driver can get the mem resources by name
 135                  */
 136                 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 137                 if (!res) {
 138                         DSSERR("can't get PHY mem resource\n");
 139                         return -EINVAL;
 140                 }
 141
 142                 temp_res.start = res->start + PHY_OFFSET;
 143                 temp_res.end = temp_res.start + PHY_SIZE - 1;
 144                 res = &temp_res;
 145         }
 146
 147         phy->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 148         if (!phy->base) {
 149                 DSSERR("can't ioremap TX PHY\n");
 150                 return -ENOMEM;
 151         }
 152
 153         phy->irq = platform_get_irq(pdev, 0);
 154         if (phy->irq < 0) {
 155                 DSSERR("platform_get_irq failed\n");
 156                 return -ENODEV;
 157         }
 158
 159         return 0;
 160 }