Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next
[cascardo/linux.git] / include / media / s5p_fimc.h
1 /*
2  * Samsung S5P/Exynos4 SoC series camera interface driver header
3  *
4  * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd.
5  * Sylwester Nawrocki <s.nawrocki@samsung.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #ifndef S5P_FIMC_H_
13 #define S5P_FIMC_H_
14
15 #include <media/media-entity.h>
16
17 /*
18  * Enumeration of the FIMC data bus types.
19  */
20 enum fimc_bus_type {
21         /* Camera parallel bus */
22         FIMC_BUS_TYPE_ITU_601 = 1,
23         /* Camera parallel bus with embedded synchronization */
24         FIMC_BUS_TYPE_ITU_656,
25         /* Camera MIPI-CSI2 serial bus */
26         FIMC_BUS_TYPE_MIPI_CSI2,
27         /* FIFO link from LCD controller (WriteBack A) */
28         FIMC_BUS_TYPE_LCD_WRITEBACK_A,
29         /* FIFO link from LCD controller (WriteBack B) */
30         FIMC_BUS_TYPE_LCD_WRITEBACK_B,
31         /* FIFO link from FIMC-IS */
32         FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B,
33 };
34
35 struct i2c_board_info;
36
37 /**
38  * struct fimc_source_info - video source description required for the host
39  *                           interface configuration
40  *
41  * @board_info: pointer to I2C subdevice's board info
42  * @clk_frequency: frequency of the clock the host interface provides to sensor
43  * @fimc_bus_type: FIMC camera input type
44  * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc.
45  * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*)
46  * @i2c_bus_num: i2c control bus id the sensor is attached to
47  * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
48  * @clk_id: index of the SoC peripheral clock for sensors
49  */
50 struct fimc_source_info {
51         struct i2c_board_info *board_info;
52         unsigned long clk_frequency;
53         enum fimc_bus_type fimc_bus_type;
54         enum fimc_bus_type sensor_bus_type;
55         u16 flags;
56         u16 i2c_bus_num;
57         u16 mux_id;
58         u8 clk_id;
59 };
60
61 /**
62  * struct s5p_platform_fimc - camera host interface platform data
63  *
64  * @source_info: properties of an image source for the host interface setup
65  * @num_clients: the number of attached image sources
66  */
67 struct s5p_platform_fimc {
68         struct fimc_source_info *source_info;
69         int num_clients;
70 };
71
72 /*
73  * v4l2_device notification id. This is only for internal use in the kernel.
74  * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
75  * frame capture mode when there is only one VSYNC pulse issued by the sensor
76  * at begining of the frame transmission.
77  */
78 #define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
79
80 enum fimc_subdev_index {
81         IDX_SENSOR,
82         IDX_CSIS,
83         IDX_FLITE,
84         IDX_FIMC,
85         IDX_MAX,
86 };
87
88 struct media_pipeline;
89 struct v4l2_subdev;
90
91 struct fimc_pipeline {
92         struct v4l2_subdev *subdevs[IDX_MAX];
93         struct media_pipeline *m_pipeline;
94 };
95
96 /*
97  * Media pipeline operations to be called from within the fimc(-lite)
98  * video node when it is the last entity of the pipeline. Implemented
99  * by corresponding media device driver.
100  */
101 struct fimc_pipeline_ops {
102         int (*open)(struct fimc_pipeline *p, struct media_entity *me,
103                           bool resume);
104         int (*close)(struct fimc_pipeline *p);
105         int (*set_stream)(struct fimc_pipeline *p, bool state);
106 };
107
108 #define fimc_pipeline_call(f, op, p, args...)                           \
109         (!(f) ? -ENODEV : (((f)->pipeline_ops && (f)->pipeline_ops->op) ? \
110                             (f)->pipeline_ops->op((p), ##args) : -ENOIOCTLCMD))
111
112 #endif /* S5P_FIMC_H_ */