netlink: Always copy on mmap TX.
[cascardo/linux.git] / net / mac80211 / agg-tx.c
1 /*
2  * HT handling
3  *
4  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
5  * Copyright 2002-2005, Instant802 Networks, Inc.
6  * Copyright 2005-2006, Devicescape Software, Inc.
7  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
8  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9  * Copyright 2007-2010, Intel Corporation
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License version 2 as
13  * published by the Free Software Foundation.
14  */
15
16 #include <linux/ieee80211.h>
17 #include <linux/slab.h>
18 #include <linux/export.h>
19 #include <net/mac80211.h>
20 #include "ieee80211_i.h"
21 #include "driver-ops.h"
22 #include "wme.h"
23
24 /**
25  * DOC: TX A-MPDU aggregation
26  *
27  * Aggregation on the TX side requires setting the hardware flag
28  * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
29  * packets with a flag indicating A-MPDU aggregation. The driver
30  * or device is responsible for actually aggregating the frames,
31  * as well as deciding how many and which to aggregate.
32  *
33  * When TX aggregation is started by some subsystem (usually the rate
34  * control algorithm would be appropriate) by calling the
35  * ieee80211_start_tx_ba_session() function, the driver will be
36  * notified via its @ampdu_action function, with the
37  * %IEEE80211_AMPDU_TX_START action.
38  *
39  * In response to that, the driver is later required to call the
40  * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
41  * start the aggregation session after the peer has also responded.
42  * If the peer responds negatively, the session will be stopped
43  * again right away. Note that it is possible for the aggregation
44  * session to be stopped before the driver has indicated that it
45  * is done setting it up, in which case it must not indicate the
46  * setup completion.
47  *
48  * Also note that, since we also need to wait for a response from
49  * the peer, the driver is notified of the completion of the
50  * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
51  * @ampdu_action callback.
52  *
53  * Similarly, when the aggregation session is stopped by the peer
54  * or something calling ieee80211_stop_tx_ba_session(), the driver's
55  * @ampdu_action function will be called with the action
56  * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
57  * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
58  * Note that the sta can get destroyed before the BA tear down is
59  * complete.
60  */
61
62 static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
63                                          const u8 *da, u16 tid,
64                                          u8 dialog_token, u16 start_seq_num,
65                                          u16 agg_size, u16 timeout)
66 {
67         struct ieee80211_local *local = sdata->local;
68         struct sk_buff *skb;
69         struct ieee80211_mgmt *mgmt;
70         u16 capab;
71
72         skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
73
74         if (!skb)
75                 return;
76
77         skb_reserve(skb, local->hw.extra_tx_headroom);
78         mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
79         memset(mgmt, 0, 24);
80         memcpy(mgmt->da, da, ETH_ALEN);
81         memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
82         if (sdata->vif.type == NL80211_IFTYPE_AP ||
83             sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
84             sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
85                 memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
86         else if (sdata->vif.type == NL80211_IFTYPE_STATION)
87                 memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
88         else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
89                 memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
90
91         mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
92                                           IEEE80211_STYPE_ACTION);
93
94         skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
95
96         mgmt->u.action.category = WLAN_CATEGORY_BACK;
97         mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
98
99         mgmt->u.action.u.addba_req.dialog_token = dialog_token;
100         capab = (u16)(1 << 1);          /* bit 1 aggregation policy */
101         capab |= (u16)(tid << 2);       /* bit 5:2 TID number */
102         capab |= (u16)(agg_size << 6);  /* bit 15:6 max size of aggergation */
103
104         mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab);
105
106         mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout);
107         mgmt->u.action.u.addba_req.start_seq_num =
108                                         cpu_to_le16(start_seq_num << 4);
109
110         ieee80211_tx_skb(sdata, skb);
111 }
112
113 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
114 {
115         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
116         struct ieee80211_local *local = sdata->local;
117         struct sk_buff *skb;
118         struct ieee80211_bar *bar;
119         u16 bar_control = 0;
120
121         skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
122         if (!skb)
123                 return;
124
125         skb_reserve(skb, local->hw.extra_tx_headroom);
126         bar = (struct ieee80211_bar *)skb_put(skb, sizeof(*bar));
127         memset(bar, 0, sizeof(*bar));
128         bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
129                                          IEEE80211_STYPE_BACK_REQ);
130         memcpy(bar->ra, ra, ETH_ALEN);
131         memcpy(bar->ta, sdata->vif.addr, ETH_ALEN);
132         bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
133         bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
134         bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT);
135         bar->control = cpu_to_le16(bar_control);
136         bar->start_seq_num = cpu_to_le16(ssn);
137
138         IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
139                                         IEEE80211_TX_CTL_REQ_TX_STATUS;
140         ieee80211_tx_skb_tid(sdata, skb, tid);
141 }
142 EXPORT_SYMBOL(ieee80211_send_bar);
143
144 void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
145                              struct tid_ampdu_tx *tid_tx)
146 {
147         lockdep_assert_held(&sta->ampdu_mlme.mtx);
148         lockdep_assert_held(&sta->lock);
149         rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
150 }
151
152 /*
153  * When multiple aggregation sessions on multiple stations
154  * are being created/destroyed simultaneously, we need to
155  * refcount the global queue stop caused by that in order
156  * to not get into a situation where one of the aggregation
157  * setup or teardown re-enables queues before the other is
158  * ready to handle that.
159  *
160  * These two functions take care of this issue by keeping
161  * a global "agg_queue_stop" refcount.
162  */
163 static void __acquires(agg_queue)
164 ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
165 {
166         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
167
168         /* we do refcounting here, so don't use the queue reason refcounting */
169
170         if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1)
171                 ieee80211_stop_queue_by_reason(
172                         &sdata->local->hw, queue,
173                         IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
174                         false);
175         __acquire(agg_queue);
176 }
177
178 static void __releases(agg_queue)
179 ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
180 {
181         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
182
183         if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0)
184                 ieee80211_wake_queue_by_reason(
185                         &sdata->local->hw, queue,
186                         IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
187                         false);
188         __release(agg_queue);
189 }
190
191 /*
192  * splice packets from the STA's pending to the local pending,
193  * requires a call to ieee80211_agg_splice_finish later
194  */
195 static void __acquires(agg_queue)
196 ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
197                              struct tid_ampdu_tx *tid_tx, u16 tid)
198 {
199         struct ieee80211_local *local = sdata->local;
200         int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
201         unsigned long flags;
202
203         ieee80211_stop_queue_agg(sdata, tid);
204
205         if (WARN(!tid_tx,
206                  "TID %d gone but expected when splicing aggregates from the pending queue\n",
207                  tid))
208                 return;
209
210         if (!skb_queue_empty(&tid_tx->pending)) {
211                 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
212                 /* copy over remaining packets */
213                 skb_queue_splice_tail_init(&tid_tx->pending,
214                                            &local->pending[queue]);
215                 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
216         }
217 }
218
219 static void __releases(agg_queue)
220 ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid)
221 {
222         ieee80211_wake_queue_agg(sdata, tid);
223 }
224
225 static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
226 {
227         struct tid_ampdu_tx *tid_tx;
228
229         lockdep_assert_held(&sta->ampdu_mlme.mtx);
230         lockdep_assert_held(&sta->lock);
231
232         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
233
234         /*
235          * When we get here, the TX path will not be lockless any more wrt.
236          * aggregation, since the OPERATIONAL bit has long been cleared.
237          * Thus it will block on getting the lock, if it occurs. So if we
238          * stop the queue now, we will not get any more packets, and any
239          * that might be being processed will wait for us here, thereby
240          * guaranteeing that no packets go to the tid_tx pending queue any
241          * more.
242          */
243
244         ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
245
246         /* future packets must not find the tid_tx struct any more */
247         ieee80211_assign_tid_tx(sta, tid, NULL);
248
249         ieee80211_agg_splice_finish(sta->sdata, tid);
250
251         kfree_rcu(tid_tx, rcu_head);
252 }
253
254 int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
255                                     enum ieee80211_agg_stop_reason reason)
256 {
257         struct ieee80211_local *local = sta->local;
258         struct tid_ampdu_tx *tid_tx;
259         enum ieee80211_ampdu_mlme_action action;
260         int ret;
261
262         lockdep_assert_held(&sta->ampdu_mlme.mtx);
263
264         switch (reason) {
265         case AGG_STOP_DECLINED:
266         case AGG_STOP_LOCAL_REQUEST:
267         case AGG_STOP_PEER_REQUEST:
268                 action = IEEE80211_AMPDU_TX_STOP_CONT;
269                 break;
270         case AGG_STOP_DESTROY_STA:
271                 action = IEEE80211_AMPDU_TX_STOP_FLUSH;
272                 break;
273         default:
274                 WARN_ON_ONCE(1);
275                 return -EINVAL;
276         }
277
278         spin_lock_bh(&sta->lock);
279
280         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
281         if (!tid_tx) {
282                 spin_unlock_bh(&sta->lock);
283                 return -ENOENT;
284         }
285
286         /*
287          * if we're already stopping ignore any new requests to stop
288          * unless we're destroying it in which case notify the driver
289          */
290         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
291                 spin_unlock_bh(&sta->lock);
292                 if (reason != AGG_STOP_DESTROY_STA)
293                         return -EALREADY;
294                 ret = drv_ampdu_action(local, sta->sdata,
295                                        IEEE80211_AMPDU_TX_STOP_FLUSH_CONT,
296                                        &sta->sta, tid, NULL, 0);
297                 WARN_ON_ONCE(ret);
298                 return 0;
299         }
300
301         if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
302                 /* not even started yet! */
303                 ieee80211_assign_tid_tx(sta, tid, NULL);
304                 spin_unlock_bh(&sta->lock);
305                 kfree_rcu(tid_tx, rcu_head);
306                 return 0;
307         }
308
309         set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
310
311         spin_unlock_bh(&sta->lock);
312
313         ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
314                sta->sta.addr, tid);
315
316         del_timer_sync(&tid_tx->addba_resp_timer);
317         del_timer_sync(&tid_tx->session_timer);
318
319         /*
320          * After this packets are no longer handed right through
321          * to the driver but are put onto tid_tx->pending instead,
322          * with locking to ensure proper access.
323          */
324         clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
325
326         /*
327          * There might be a few packets being processed right now (on
328          * another CPU) that have already gotten past the aggregation
329          * check when it was still OPERATIONAL and consequently have
330          * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
331          * call into the driver at the same time or even before the
332          * TX paths calls into it, which could confuse the driver.
333          *
334          * Wait for all currently running TX paths to finish before
335          * telling the driver. New packets will not go through since
336          * the aggregation session is no longer OPERATIONAL.
337          */
338         synchronize_net();
339
340         tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ?
341                                         WLAN_BACK_RECIPIENT :
342                                         WLAN_BACK_INITIATOR;
343         tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST;
344
345         ret = drv_ampdu_action(local, sta->sdata, action,
346                                &sta->sta, tid, NULL, 0);
347
348         /* HW shall not deny going back to legacy */
349         if (WARN_ON(ret)) {
350                 /*
351                  * We may have pending packets get stuck in this case...
352                  * Not bothering with a workaround for now.
353                  */
354         }
355
356         /*
357          * In the case of AGG_STOP_DESTROY_STA, the driver won't
358          * necessarily call ieee80211_stop_tx_ba_cb(), so this may
359          * seem like we can leave the tid_tx data pending forever.
360          * This is true, in a way, but "forever" is only until the
361          * station struct is actually destroyed. In the meantime,
362          * leaving it around ensures that we don't transmit packets
363          * to the driver on this TID which might confuse it.
364          */
365
366         return 0;
367 }
368
369 /*
370  * After sending add Block Ack request we activated a timer until
371  * add Block Ack response will arrive from the recipient.
372  * If this timer expires sta_addba_resp_timer_expired will be executed.
373  */
374 static void sta_addba_resp_timer_expired(unsigned long data)
375 {
376         /* not an elegant detour, but there is no choice as the timer passes
377          * only one argument, and both sta_info and TID are needed, so init
378          * flow in sta_info_create gives the TID as data, while the timer_to_id
379          * array gives the sta through container_of */
380         u16 tid = *(u8 *)data;
381         struct sta_info *sta = container_of((void *)data,
382                 struct sta_info, timer_to_tid[tid]);
383         struct tid_ampdu_tx *tid_tx;
384
385         /* check if the TID waits for addBA response */
386         rcu_read_lock();
387         tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
388         if (!tid_tx ||
389             test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
390                 rcu_read_unlock();
391                 ht_dbg(sta->sdata,
392                        "timer expired on %pM tid %d but we are not (or no longer) expecting addBA response there\n",
393                        sta->sta.addr, tid);
394                 return;
395         }
396
397         ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
398                sta->sta.addr, tid);
399
400         ieee80211_stop_tx_ba_session(&sta->sta, tid);
401         rcu_read_unlock();
402 }
403
404 void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
405 {
406         struct tid_ampdu_tx *tid_tx;
407         struct ieee80211_local *local = sta->local;
408         struct ieee80211_sub_if_data *sdata = sta->sdata;
409         u16 start_seq_num;
410         int ret;
411
412         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
413
414         /*
415          * Start queuing up packets for this aggregation session.
416          * We're going to release them once the driver is OK with
417          * that.
418          */
419         clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
420
421         /*
422          * Make sure no packets are being processed. This ensures that
423          * we have a valid starting sequence number and that in-flight
424          * packets have been flushed out and no packets for this TID
425          * will go into the driver during the ampdu_action call.
426          */
427         synchronize_net();
428
429         start_seq_num = sta->tid_seq[tid] >> 4;
430
431         ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
432                                &sta->sta, tid, &start_seq_num, 0);
433         if (ret) {
434                 ht_dbg(sdata,
435                        "BA request denied - HW unavailable for %pM tid %d\n",
436                        sta->sta.addr, tid);
437                 spin_lock_bh(&sta->lock);
438                 ieee80211_agg_splice_packets(sdata, tid_tx, tid);
439                 ieee80211_assign_tid_tx(sta, tid, NULL);
440                 ieee80211_agg_splice_finish(sdata, tid);
441                 spin_unlock_bh(&sta->lock);
442
443                 kfree_rcu(tid_tx, rcu_head);
444                 return;
445         }
446
447         /* activate the timer for the recipient's addBA response */
448         mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
449         ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
450                sta->sta.addr, tid);
451
452         spin_lock_bh(&sta->lock);
453         sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
454         sta->ampdu_mlme.addba_req_num[tid]++;
455         spin_unlock_bh(&sta->lock);
456
457         /* send AddBA request */
458         ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
459                                      tid_tx->dialog_token, start_seq_num,
460                                      local->hw.max_tx_aggregation_subframes,
461                                      tid_tx->timeout);
462 }
463
464 /*
465  * After accepting the AddBA Response we activated a timer,
466  * resetting it after each frame that we send.
467  */
468 static void sta_tx_agg_session_timer_expired(unsigned long data)
469 {
470         /* not an elegant detour, but there is no choice as the timer passes
471          * only one argument, and various sta_info are needed here, so init
472          * flow in sta_info_create gives the TID as data, while the timer_to_id
473          * array gives the sta through container_of */
474         u8 *ptid = (u8 *)data;
475         u8 *timer_to_id = ptid - *ptid;
476         struct sta_info *sta = container_of(timer_to_id, struct sta_info,
477                                          timer_to_tid[0]);
478         struct tid_ampdu_tx *tid_tx;
479         unsigned long timeout;
480
481         rcu_read_lock();
482         tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[*ptid]);
483         if (!tid_tx || test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
484                 rcu_read_unlock();
485                 return;
486         }
487
488         timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout);
489         if (time_is_after_jiffies(timeout)) {
490                 mod_timer(&tid_tx->session_timer, timeout);
491                 rcu_read_unlock();
492                 return;
493         }
494
495         rcu_read_unlock();
496
497         ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
498                sta->sta.addr, (u16)*ptid);
499
500         ieee80211_stop_tx_ba_session(&sta->sta, *ptid);
501 }
502
503 int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
504                                   u16 timeout)
505 {
506         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
507         struct ieee80211_sub_if_data *sdata = sta->sdata;
508         struct ieee80211_local *local = sdata->local;
509         struct tid_ampdu_tx *tid_tx;
510         int ret = 0;
511
512         if (WARN(sta->reserved_tid == tid,
513                  "Requested to start BA session on reserved tid=%d", tid))
514                 return -EINVAL;
515
516         trace_api_start_tx_ba_session(pubsta, tid);
517
518         if (WARN_ON_ONCE(!local->ops->ampdu_action))
519                 return -EINVAL;
520
521         if ((tid >= IEEE80211_NUM_TIDS) ||
522             !(local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION) ||
523             (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW))
524                 return -EINVAL;
525
526         ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
527                pubsta->addr, tid);
528
529         if (sdata->vif.type != NL80211_IFTYPE_STATION &&
530             sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
531             sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
532             sdata->vif.type != NL80211_IFTYPE_AP &&
533             sdata->vif.type != NL80211_IFTYPE_ADHOC)
534                 return -EINVAL;
535
536         if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
537                 ht_dbg(sdata,
538                        "BA sessions blocked - Denying BA session request %pM tid %d\n",
539                        sta->sta.addr, tid);
540                 return -EINVAL;
541         }
542
543         /*
544          * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
545          * member of an IBSS, and has no other existing Block Ack agreement
546          * with the recipient STA, then the initiating STA shall transmit a
547          * Probe Request frame to the recipient STA and shall not transmit an
548          * ADDBA Request frame unless it receives a Probe Response frame
549          * from the recipient within dot11ADDBAFailureTimeout.
550          *
551          * The probe request mechanism for ADDBA is currently not implemented,
552          * but we only build up Block Ack session with HT STAs. This information
553          * is set when we receive a bss info from a probe response or a beacon.
554          */
555         if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
556             !sta->sta.ht_cap.ht_supported) {
557                 ht_dbg(sdata,
558                        "BA request denied - IBSS STA %pM does not advertise HT support\n",
559                        pubsta->addr);
560                 return -EINVAL;
561         }
562
563         spin_lock_bh(&sta->lock);
564
565         /* we have tried too many times, receiver does not want A-MPDU */
566         if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
567                 ret = -EBUSY;
568                 goto err_unlock_sta;
569         }
570
571         /*
572          * if we have tried more than HT_AGG_BURST_RETRIES times we
573          * will spread our requests in time to avoid stalling connection
574          * for too long
575          */
576         if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
577             time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
578                         HT_AGG_RETRIES_PERIOD)) {
579                 ht_dbg(sdata,
580                        "BA request denied - waiting a grace period after %d failed requests on %pM tid %u\n",
581                        sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
582                 ret = -EBUSY;
583                 goto err_unlock_sta;
584         }
585
586         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
587         /* check if the TID is not in aggregation flow already */
588         if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
589                 ht_dbg(sdata,
590                        "BA request denied - session is not idle on %pM tid %u\n",
591                        sta->sta.addr, tid);
592                 ret = -EAGAIN;
593                 goto err_unlock_sta;
594         }
595
596         /* prepare A-MPDU MLME for Tx aggregation */
597         tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
598         if (!tid_tx) {
599                 ret = -ENOMEM;
600                 goto err_unlock_sta;
601         }
602
603         skb_queue_head_init(&tid_tx->pending);
604         __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
605
606         tid_tx->timeout = timeout;
607
608         /* response timer */
609         tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired;
610         tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid];
611         init_timer(&tid_tx->addba_resp_timer);
612
613         /* tx timer */
614         tid_tx->session_timer.function = sta_tx_agg_session_timer_expired;
615         tid_tx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid];
616         init_timer_deferrable(&tid_tx->session_timer);
617
618         /* assign a dialog token */
619         sta->ampdu_mlme.dialog_token_allocator++;
620         tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
621
622         /*
623          * Finally, assign it to the start array; the work item will
624          * collect it and move it to the normal array.
625          */
626         sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
627
628         ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
629
630         /* this flow continues off the work */
631  err_unlock_sta:
632         spin_unlock_bh(&sta->lock);
633         return ret;
634 }
635 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
636
637 static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
638                                          struct sta_info *sta, u16 tid)
639 {
640         struct tid_ampdu_tx *tid_tx;
641
642         lockdep_assert_held(&sta->ampdu_mlme.mtx);
643
644         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
645
646         ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
647                sta->sta.addr, tid);
648
649         drv_ampdu_action(local, sta->sdata,
650                          IEEE80211_AMPDU_TX_OPERATIONAL,
651                          &sta->sta, tid, NULL, tid_tx->buf_size);
652
653         /*
654          * synchronize with TX path, while splicing the TX path
655          * should block so it won't put more packets onto pending.
656          */
657         spin_lock_bh(&sta->lock);
658
659         ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
660         /*
661          * Now mark as operational. This will be visible
662          * in the TX path, and lets it go lock-free in
663          * the common case.
664          */
665         set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
666         ieee80211_agg_splice_finish(sta->sdata, tid);
667
668         spin_unlock_bh(&sta->lock);
669 }
670
671 void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
672 {
673         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
674         struct ieee80211_local *local = sdata->local;
675         struct sta_info *sta;
676         struct tid_ampdu_tx *tid_tx;
677
678         trace_api_start_tx_ba_cb(sdata, ra, tid);
679
680         if (tid >= IEEE80211_NUM_TIDS) {
681                 ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
682                        tid, IEEE80211_NUM_TIDS);
683                 return;
684         }
685
686         mutex_lock(&local->sta_mtx);
687         sta = sta_info_get_bss(sdata, ra);
688         if (!sta) {
689                 mutex_unlock(&local->sta_mtx);
690                 ht_dbg(sdata, "Could not find station: %pM\n", ra);
691                 return;
692         }
693
694         mutex_lock(&sta->ampdu_mlme.mtx);
695         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
696
697         if (WARN_ON(!tid_tx)) {
698                 ht_dbg(sdata, "addBA was not requested!\n");
699                 goto unlock;
700         }
701
702         if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
703                 goto unlock;
704
705         if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
706                 ieee80211_agg_tx_operational(local, sta, tid);
707
708  unlock:
709         mutex_unlock(&sta->ampdu_mlme.mtx);
710         mutex_unlock(&local->sta_mtx);
711 }
712
713 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
714                                       const u8 *ra, u16 tid)
715 {
716         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
717         struct ieee80211_local *local = sdata->local;
718         struct ieee80211_ra_tid *ra_tid;
719         struct sk_buff *skb = dev_alloc_skb(0);
720
721         if (unlikely(!skb))
722                 return;
723
724         ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
725         memcpy(&ra_tid->ra, ra, ETH_ALEN);
726         ra_tid->tid = tid;
727
728         skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_START;
729         skb_queue_tail(&sdata->skb_queue, skb);
730         ieee80211_queue_work(&local->hw, &sdata->work);
731 }
732 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
733
734 int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
735                                    enum ieee80211_agg_stop_reason reason)
736 {
737         int ret;
738
739         mutex_lock(&sta->ampdu_mlme.mtx);
740
741         ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason);
742
743         mutex_unlock(&sta->ampdu_mlme.mtx);
744
745         return ret;
746 }
747
748 int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
749 {
750         struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
751         struct ieee80211_sub_if_data *sdata = sta->sdata;
752         struct ieee80211_local *local = sdata->local;
753         struct tid_ampdu_tx *tid_tx;
754         int ret = 0;
755
756         trace_api_stop_tx_ba_session(pubsta, tid);
757
758         if (!local->ops->ampdu_action)
759                 return -EINVAL;
760
761         if (tid >= IEEE80211_NUM_TIDS)
762                 return -EINVAL;
763
764         spin_lock_bh(&sta->lock);
765         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
766
767         if (!tid_tx) {
768                 ret = -ENOENT;
769                 goto unlock;
770         }
771
772         WARN(sta->reserved_tid == tid,
773              "Requested to stop BA session on reserved tid=%d", tid);
774
775         if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
776                 /* already in progress stopping it */
777                 ret = 0;
778                 goto unlock;
779         }
780
781         set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
782         ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
783
784  unlock:
785         spin_unlock_bh(&sta->lock);
786         return ret;
787 }
788 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
789
790 void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
791 {
792         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
793         struct ieee80211_local *local = sdata->local;
794         struct sta_info *sta;
795         struct tid_ampdu_tx *tid_tx;
796
797         trace_api_stop_tx_ba_cb(sdata, ra, tid);
798
799         if (tid >= IEEE80211_NUM_TIDS) {
800                 ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
801                        tid, IEEE80211_NUM_TIDS);
802                 return;
803         }
804
805         ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n", ra, tid);
806
807         mutex_lock(&local->sta_mtx);
808
809         sta = sta_info_get_bss(sdata, ra);
810         if (!sta) {
811                 ht_dbg(sdata, "Could not find station: %pM\n", ra);
812                 goto unlock;
813         }
814
815         mutex_lock(&sta->ampdu_mlme.mtx);
816         spin_lock_bh(&sta->lock);
817         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
818
819         if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
820                 ht_dbg(sdata,
821                        "unexpected callback to A-MPDU stop for %pM tid %d\n",
822                        sta->sta.addr, tid);
823                 goto unlock_sta;
824         }
825
826         if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop)
827                 ieee80211_send_delba(sta->sdata, ra, tid,
828                         WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
829
830         ieee80211_remove_tid_tx(sta, tid);
831
832  unlock_sta:
833         spin_unlock_bh(&sta->lock);
834         mutex_unlock(&sta->ampdu_mlme.mtx);
835  unlock:
836         mutex_unlock(&local->sta_mtx);
837 }
838
839 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
840                                      const u8 *ra, u16 tid)
841 {
842         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
843         struct ieee80211_local *local = sdata->local;
844         struct ieee80211_ra_tid *ra_tid;
845         struct sk_buff *skb = dev_alloc_skb(0);
846
847         if (unlikely(!skb))
848                 return;
849
850         ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
851         memcpy(&ra_tid->ra, ra, ETH_ALEN);
852         ra_tid->tid = tid;
853
854         skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_STOP;
855         skb_queue_tail(&sdata->skb_queue, skb);
856         ieee80211_queue_work(&local->hw, &sdata->work);
857 }
858 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
859
860
861 void ieee80211_process_addba_resp(struct ieee80211_local *local,
862                                   struct sta_info *sta,
863                                   struct ieee80211_mgmt *mgmt,
864                                   size_t len)
865 {
866         struct tid_ampdu_tx *tid_tx;
867         u16 capab, tid;
868         u8 buf_size;
869
870         capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
871         tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
872         buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
873
874         mutex_lock(&sta->ampdu_mlme.mtx);
875
876         tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
877         if (!tid_tx)
878                 goto out;
879
880         if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
881                 ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
882                        sta->sta.addr, tid);
883                 goto out;
884         }
885
886         del_timer_sync(&tid_tx->addba_resp_timer);
887
888         ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
889                sta->sta.addr, tid);
890
891         /*
892          * addba_resp_timer may have fired before we got here, and
893          * caused WANT_STOP to be set. If the stop then was already
894          * processed further, STOPPING might be set.
895          */
896         if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
897             test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
898                 ht_dbg(sta->sdata,
899                        "got addBA resp for %pM tid %d but we already gave up\n",
900                        sta->sta.addr, tid);
901                 goto out;
902         }
903
904         /*
905          * IEEE 802.11-2007 7.3.1.14:
906          * In an ADDBA Response frame, when the Status Code field
907          * is set to 0, the Buffer Size subfield is set to a value
908          * of at least 1.
909          */
910         if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
911                         == WLAN_STATUS_SUCCESS && buf_size) {
912                 if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
913                                      &tid_tx->state)) {
914                         /* ignore duplicate response */
915                         goto out;
916                 }
917
918                 tid_tx->buf_size = buf_size;
919
920                 if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
921                         ieee80211_agg_tx_operational(local, sta, tid);
922
923                 sta->ampdu_mlme.addba_req_num[tid] = 0;
924
925                 if (tid_tx->timeout) {
926                         mod_timer(&tid_tx->session_timer,
927                                   TU_TO_EXP_TIME(tid_tx->timeout));
928                         tid_tx->last_tx = jiffies;
929                 }
930
931         } else {
932                 ___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED);
933         }
934
935  out:
936         mutex_unlock(&sta->ampdu_mlme.mtx);
937 }