ath6kl: make ath6kl_bmi_[read|write]_hi32() endian safe
[cascardo/linux.git] / net / mac80211 / mesh.c
1 /*
2  * Copyright (c) 2008, 2009 open80211s Ltd.
3  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
4  *             Javier Cardona <javier@cozybit.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
14 #include "mesh.h"
15
16 #define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
17 #define MESHCONF_CAPAB_FORWARDING    0x08
18
19 #define TMR_RUNNING_HK  0
20 #define TMR_RUNNING_MP  1
21 #define TMR_RUNNING_MPR 2
22
23 int mesh_allocated;
24 static struct kmem_cache *rm_cache;
25
26 #ifdef CONFIG_MAC80211_MESH
27 bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
28 {
29         return (mgmt->u.action.u.mesh_action.action_code ==
30                         WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
31 }
32 #else
33 bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
34 { return false; }
35 #endif
36
37 void ieee80211s_init(void)
38 {
39         mesh_pathtbl_init();
40         mesh_allocated = 1;
41         rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
42                                      0, 0, NULL);
43 }
44
45 void ieee80211s_stop(void)
46 {
47         mesh_pathtbl_unregister();
48         kmem_cache_destroy(rm_cache);
49 }
50
51 static void ieee80211_mesh_housekeeping_timer(unsigned long data)
52 {
53         struct ieee80211_sub_if_data *sdata = (void *) data;
54         struct ieee80211_local *local = sdata->local;
55         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
56
57         set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
58
59         if (local->quiescing) {
60                 set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
61                 return;
62         }
63
64         ieee80211_queue_work(&local->hw, &sdata->work);
65 }
66
67 /**
68  * mesh_matches_local - check if the config of a mesh point matches ours
69  *
70  * @ie: information elements of a management frame from the mesh peer
71  * @sdata: local mesh subif
72  *
73  * This function checks if the mesh configuration of a mesh point matches the
74  * local mesh configuration, i.e. if both nodes belong to the same mesh network.
75  */
76 bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata)
77 {
78         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
79         struct ieee80211_local *local = sdata->local;
80
81         /*
82          * As support for each feature is added, check for matching
83          * - On mesh config capabilities
84          *   - Power Save Support En
85          *   - Sync support enabled
86          *   - Sync support active
87          *   - Sync support required from peer
88          *   - MDA enabled
89          * - Power management control on fc
90          */
91         if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
92              memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
93              (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
94              (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
95              (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
96              (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
97              (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
98                 goto mismatch;
99
100         /* disallow peering with mismatched channel types for now */
101         if (ie->ht_info_elem &&
102             (local->_oper_channel_type !=
103              ieee80211_ht_info_to_channel_type(ie->ht_info_elem)))
104                 goto mismatch;
105
106         return true;
107 mismatch:
108         return false;
109 }
110
111 /**
112  * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
113  *
114  * @ie: information elements of a management frame from the mesh peer
115  */
116 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
117 {
118         return (ie->mesh_config->meshconf_cap &
119             MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
120 }
121
122 /**
123  * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
124  *
125  * @sdata: mesh interface in which mesh beacons are going to be updated
126  */
127 void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
128 {
129         bool free_plinks;
130
131         /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
132          * the mesh interface might be able to establish plinks with peers that
133          * are already on the table but are not on PLINK_ESTAB state. However,
134          * in general the mesh interface is not accepting peer link requests
135          * from new peers, and that must be reflected in the beacon
136          */
137         free_plinks = mesh_plink_availables(sdata);
138
139         if (free_plinks != sdata->u.mesh.accepting_plinks)
140                 ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
141 }
142
143 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
144 {
145         int i;
146
147         sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
148         if (!sdata->u.mesh.rmc)
149                 return -ENOMEM;
150         sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
151         for (i = 0; i < RMC_BUCKETS; i++)
152                 INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
153         return 0;
154 }
155
156 void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
157 {
158         struct mesh_rmc *rmc = sdata->u.mesh.rmc;
159         struct rmc_entry *p, *n;
160         int i;
161
162         if (!sdata->u.mesh.rmc)
163                 return;
164
165         for (i = 0; i < RMC_BUCKETS; i++)
166                 list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
167                         list_del(&p->list);
168                         kmem_cache_free(rm_cache, p);
169                 }
170
171         kfree(rmc);
172         sdata->u.mesh.rmc = NULL;
173 }
174
175 /**
176  * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
177  *
178  * @sa:         source address
179  * @mesh_hdr:   mesh_header
180  *
181  * Returns: 0 if the frame is not in the cache, nonzero otherwise.
182  *
183  * Checks using the source address and the mesh sequence number if we have
184  * received this frame lately. If the frame is not in the cache, it is added to
185  * it.
186  */
187 int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
188                    struct ieee80211_sub_if_data *sdata)
189 {
190         struct mesh_rmc *rmc = sdata->u.mesh.rmc;
191         u32 seqnum = 0;
192         int entries = 0;
193         u8 idx;
194         struct rmc_entry *p, *n;
195
196         /* Don't care about endianness since only match matters */
197         memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
198         idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
199         list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
200                 ++entries;
201                 if (time_after(jiffies, p->exp_time) ||
202                                 (entries == RMC_QUEUE_MAX_LEN)) {
203                         list_del(&p->list);
204                         kmem_cache_free(rm_cache, p);
205                         --entries;
206                 } else if ((seqnum == p->seqnum) &&
207                            (memcmp(sa, p->sa, ETH_ALEN) == 0))
208                         return -1;
209         }
210
211         p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
212         if (!p)
213                 return 0;
214
215         p->seqnum = seqnum;
216         p->exp_time = jiffies + RMC_TIMEOUT;
217         memcpy(p->sa, sa, ETH_ALEN);
218         list_add(&p->list, &rmc->bucket[idx].list);
219         return 0;
220 }
221
222 int
223 mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
224 {
225         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
226         u8 *pos, neighbors;
227         u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
228
229         if (skb_tailroom(skb) < 2 + meshconf_len)
230                 return -ENOMEM;
231
232         pos = skb_put(skb, 2 + meshconf_len);
233         *pos++ = WLAN_EID_MESH_CONFIG;
234         *pos++ = meshconf_len;
235
236         /* Active path selection protocol ID */
237         *pos++ = ifmsh->mesh_pp_id;
238         /* Active path selection metric ID   */
239         *pos++ = ifmsh->mesh_pm_id;
240         /* Congestion control mode identifier */
241         *pos++ = ifmsh->mesh_cc_id;
242         /* Synchronization protocol identifier */
243         *pos++ = ifmsh->mesh_sp_id;
244         /* Authentication Protocol identifier */
245         *pos++ = ifmsh->mesh_auth_id;
246         /* Mesh Formation Info - number of neighbors */
247         neighbors = atomic_read(&ifmsh->mshstats.estab_plinks);
248         /* Number of neighbor mesh STAs or 15 whichever is smaller */
249         neighbors = (neighbors > 15) ? 15 : neighbors;
250         *pos++ = neighbors << 1;
251         /* Mesh capability */
252         ifmsh->accepting_plinks = mesh_plink_availables(sdata);
253         *pos = MESHCONF_CAPAB_FORWARDING;
254         *pos++ |= ifmsh->accepting_plinks ?
255             MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
256         *pos++ = 0x00;
257
258         return 0;
259 }
260
261 int
262 mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
263 {
264         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
265         u8 *pos;
266
267         if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
268                 return -ENOMEM;
269
270         pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
271         *pos++ = WLAN_EID_MESH_ID;
272         *pos++ = ifmsh->mesh_id_len;
273         if (ifmsh->mesh_id_len)
274                 memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
275
276         return 0;
277 }
278
279 int
280 mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
281 {
282         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
283         u8 offset, len;
284         const u8 *data;
285
286         if (!ifmsh->ie || !ifmsh->ie_len)
287                 return 0;
288
289         /* fast-forward to vendor IEs */
290         offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
291
292         if (offset) {
293                 len = ifmsh->ie_len - offset;
294                 data = ifmsh->ie + offset;
295                 if (skb_tailroom(skb) < len)
296                         return -ENOMEM;
297                 memcpy(skb_put(skb, len), data, len);
298         }
299
300         return 0;
301 }
302
303 int
304 mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
305 {
306         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
307         u8 len = 0;
308         const u8 *data;
309
310         if (!ifmsh->ie || !ifmsh->ie_len)
311                 return 0;
312
313         /* find RSN IE */
314         data = ifmsh->ie;
315         while (data < ifmsh->ie + ifmsh->ie_len) {
316                 if (*data == WLAN_EID_RSN) {
317                         len = data[1] + 2;
318                         break;
319                 }
320                 data++;
321         }
322
323         if (len) {
324                 if (skb_tailroom(skb) < len)
325                         return -ENOMEM;
326                 memcpy(skb_put(skb, len), data, len);
327         }
328
329         return 0;
330 }
331
332 int mesh_add_ds_params_ie(struct sk_buff *skb,
333                           struct ieee80211_sub_if_data *sdata)
334 {
335         struct ieee80211_local *local = sdata->local;
336         struct ieee80211_supported_band *sband;
337         u8 *pos;
338
339         if (skb_tailroom(skb) < 3)
340                 return -ENOMEM;
341
342         sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
343         if (sband->band == IEEE80211_BAND_2GHZ) {
344                 pos = skb_put(skb, 2 + 1);
345                 *pos++ = WLAN_EID_DS_PARAMS;
346                 *pos++ = 1;
347                 *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
348         }
349
350         return 0;
351 }
352
353 int mesh_add_ht_cap_ie(struct sk_buff *skb,
354                        struct ieee80211_sub_if_data *sdata)
355 {
356         struct ieee80211_local *local = sdata->local;
357         struct ieee80211_supported_band *sband;
358         u8 *pos;
359
360         sband = local->hw.wiphy->bands[local->oper_channel->band];
361         if (!sband->ht_cap.ht_supported ||
362             local->_oper_channel_type == NL80211_CHAN_NO_HT)
363                 return 0;
364
365         if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
366                 return -ENOMEM;
367
368         pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
369         ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
370
371         return 0;
372 }
373
374 int mesh_add_ht_info_ie(struct sk_buff *skb,
375                         struct ieee80211_sub_if_data *sdata)
376 {
377         struct ieee80211_local *local = sdata->local;
378         struct ieee80211_channel *channel = local->oper_channel;
379         enum nl80211_channel_type channel_type = local->_oper_channel_type;
380         struct ieee80211_supported_band *sband =
381                                 local->hw.wiphy->bands[channel->band];
382         struct ieee80211_sta_ht_cap *ht_cap = &sband->ht_cap;
383         u8 *pos;
384
385         if (!ht_cap->ht_supported || channel_type == NL80211_CHAN_NO_HT)
386                 return 0;
387
388         if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_info))
389                 return -ENOMEM;
390
391         pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_info));
392         ieee80211_ie_build_ht_info(pos, ht_cap, channel, channel_type);
393
394         return 0;
395 }
396 static void ieee80211_mesh_path_timer(unsigned long data)
397 {
398         struct ieee80211_sub_if_data *sdata =
399                 (struct ieee80211_sub_if_data *) data;
400         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
401         struct ieee80211_local *local = sdata->local;
402
403         if (local->quiescing) {
404                 set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
405                 return;
406         }
407
408         ieee80211_queue_work(&local->hw, &sdata->work);
409 }
410
411 static void ieee80211_mesh_path_root_timer(unsigned long data)
412 {
413         struct ieee80211_sub_if_data *sdata =
414                 (struct ieee80211_sub_if_data *) data;
415         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
416         struct ieee80211_local *local = sdata->local;
417
418         set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
419
420         if (local->quiescing) {
421                 set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
422                 return;
423         }
424
425         ieee80211_queue_work(&local->hw, &sdata->work);
426 }
427
428 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
429 {
430         if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
431                 set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
432         else {
433                 clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
434                 /* stop running timer */
435                 del_timer_sync(&ifmsh->mesh_path_root_timer);
436         }
437 }
438
439 /**
440  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
441  * @hdr:        802.11 frame header
442  * @fc:         frame control field
443  * @meshda:     destination address in the mesh
444  * @meshsa:     source address address in the mesh.  Same as TA, as frame is
445  *              locally originated.
446  *
447  * Return the length of the 802.11 (does not include a mesh control header)
448  */
449 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
450                                   const u8 *meshda, const u8 *meshsa)
451 {
452         if (is_multicast_ether_addr(meshda)) {
453                 *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
454                 /* DA TA SA */
455                 memcpy(hdr->addr1, meshda, ETH_ALEN);
456                 memcpy(hdr->addr2, meshsa, ETH_ALEN);
457                 memcpy(hdr->addr3, meshsa, ETH_ALEN);
458                 return 24;
459         } else {
460                 *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
461                 /* RA TA DA SA */
462                 memset(hdr->addr1, 0, ETH_ALEN);   /* RA is resolved later */
463                 memcpy(hdr->addr2, meshsa, ETH_ALEN);
464                 memcpy(hdr->addr3, meshda, ETH_ALEN);
465                 memcpy(hdr->addr4, meshsa, ETH_ALEN);
466                 return 30;
467         }
468 }
469
470 /**
471  * ieee80211_new_mesh_header - create a new mesh header
472  * @meshhdr:    uninitialized mesh header
473  * @sdata:      mesh interface to be used
474  * @addr4or5:   1st address in the ae header, which may correspond to address 4
475  *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
476  *              be NULL.
477  * @addr6:      2nd address in the ae header, which corresponds to addr6 of the
478  *              mesh frame
479  *
480  * Return the header length.
481  */
482 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
483                 struct ieee80211_sub_if_data *sdata, char *addr4or5,
484                 char *addr6)
485 {
486         int aelen = 0;
487         BUG_ON(!addr4or5 && addr6);
488         memset(meshhdr, 0, sizeof(*meshhdr));
489         meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
490         put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
491         sdata->u.mesh.mesh_seqnum++;
492         if (addr4or5 && !addr6) {
493                 meshhdr->flags |= MESH_FLAGS_AE_A4;
494                 aelen += ETH_ALEN;
495                 memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
496         } else if (addr4or5 && addr6) {
497                 meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
498                 aelen += 2 * ETH_ALEN;
499                 memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
500                 memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
501         }
502         return 6 + aelen;
503 }
504
505 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
506                            struct ieee80211_if_mesh *ifmsh)
507 {
508         bool free_plinks;
509
510 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
511         printk(KERN_DEBUG "%s: running mesh housekeeping\n",
512                sdata->name);
513 #endif
514
515         ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
516         mesh_path_expire(sdata);
517
518         free_plinks = mesh_plink_availables(sdata);
519         if (free_plinks != sdata->u.mesh.accepting_plinks)
520                 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
521
522         mod_timer(&ifmsh->housekeeping_timer,
523                   round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
524 }
525
526 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
527 {
528         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
529
530         mesh_path_tx_root_frame(sdata);
531         mod_timer(&ifmsh->mesh_path_root_timer,
532                   round_jiffies(TU_TO_EXP_TIME(
533                                   ifmsh->mshcfg.dot11MeshHWMPRannInterval)));
534 }
535
536 #ifdef CONFIG_PM
537 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
538 {
539         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
540
541         /* use atomic bitops in case all timers fire at the same time */
542
543         if (del_timer_sync(&ifmsh->housekeeping_timer))
544                 set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
545         if (del_timer_sync(&ifmsh->mesh_path_timer))
546                 set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
547         if (del_timer_sync(&ifmsh->mesh_path_root_timer))
548                 set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
549 }
550
551 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
552 {
553         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
554
555         if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
556                 add_timer(&ifmsh->housekeeping_timer);
557         if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
558                 add_timer(&ifmsh->mesh_path_timer);
559         if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
560                 add_timer(&ifmsh->mesh_path_root_timer);
561         ieee80211_mesh_root_setup(ifmsh);
562 }
563 #endif
564
565 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
566 {
567         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
568         struct ieee80211_local *local = sdata->local;
569
570         local->fif_other_bss++;
571         /* mesh ifaces must set allmulti to forward mcast traffic */
572         atomic_inc(&local->iff_allmultis);
573         ieee80211_configure_filter(local);
574
575         ifmsh->mesh_cc_id = 0;  /* Disabled */
576         ifmsh->mesh_sp_id = 0;  /* Neighbor Offset */
577         ifmsh->mesh_auth_id = 0;        /* Disabled */
578         set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
579         ieee80211_mesh_root_setup(ifmsh);
580         ieee80211_queue_work(&local->hw, &sdata->work);
581         sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
582         ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
583                                                 BSS_CHANGED_BEACON_ENABLED |
584                                                 BSS_CHANGED_BEACON_INT);
585 }
586
587 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
588 {
589         struct ieee80211_local *local = sdata->local;
590         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
591
592         ifmsh->mesh_id_len = 0;
593         ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
594         sta_info_flush(local, NULL);
595
596         del_timer_sync(&sdata->u.mesh.housekeeping_timer);
597         del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
598         /*
599          * If the timer fired while we waited for it, it will have
600          * requeued the work. Now the work will be running again
601          * but will not rearm the timer again because it checks
602          * whether the interface is running, which, at this point,
603          * it no longer is.
604          */
605         cancel_work_sync(&sdata->work);
606
607         local->fif_other_bss--;
608         atomic_dec(&local->iff_allmultis);
609         ieee80211_configure_filter(local);
610 }
611
612 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
613                                         u16 stype,
614                                         struct ieee80211_mgmt *mgmt,
615                                         size_t len,
616                                         struct ieee80211_rx_status *rx_status)
617 {
618         struct ieee80211_local *local = sdata->local;
619         struct ieee802_11_elems elems;
620         struct ieee80211_channel *channel;
621         u32 supp_rates = 0;
622         size_t baselen;
623         int freq;
624         enum ieee80211_band band = rx_status->band;
625
626         /* ignore ProbeResp to foreign address */
627         if (stype == IEEE80211_STYPE_PROBE_RESP &&
628             compare_ether_addr(mgmt->da, sdata->vif.addr))
629                 return;
630
631         baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
632         if (baselen > len)
633                 return;
634
635         ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
636                                &elems);
637
638         /* ignore beacons from secure mesh peers if our security is off */
639         if (elems.rsn_len && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE)
640                 return;
641
642         if (elems.ds_params && elems.ds_params_len == 1)
643                 freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
644         else
645                 freq = rx_status->freq;
646
647         channel = ieee80211_get_channel(local->hw.wiphy, freq);
648
649         if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
650                 return;
651
652         if (elems.mesh_id && elems.mesh_config &&
653             mesh_matches_local(&elems, sdata)) {
654                 supp_rates = ieee80211_sta_get_rates(local, &elems, band);
655                 mesh_neighbour_update(mgmt->sa, supp_rates, sdata, &elems);
656         }
657 }
658
659 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
660                                           struct ieee80211_mgmt *mgmt,
661                                           size_t len,
662                                           struct ieee80211_rx_status *rx_status)
663 {
664         switch (mgmt->u.action.category) {
665         case WLAN_CATEGORY_SELF_PROTECTED:
666                 switch (mgmt->u.action.u.self_prot.action_code) {
667                 case WLAN_SP_MESH_PEERING_OPEN:
668                 case WLAN_SP_MESH_PEERING_CLOSE:
669                 case WLAN_SP_MESH_PEERING_CONFIRM:
670                         mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
671                         break;
672                 }
673                 break;
674         case WLAN_CATEGORY_MESH_ACTION:
675                 if (mesh_action_is_path_sel(mgmt))
676                         mesh_rx_path_sel_frame(sdata, mgmt, len);
677                 break;
678         }
679 }
680
681 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
682                                    struct sk_buff *skb)
683 {
684         struct ieee80211_rx_status *rx_status;
685         struct ieee80211_mgmt *mgmt;
686         u16 stype;
687
688         rx_status = IEEE80211_SKB_RXCB(skb);
689         mgmt = (struct ieee80211_mgmt *) skb->data;
690         stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
691
692         switch (stype) {
693         case IEEE80211_STYPE_PROBE_RESP:
694         case IEEE80211_STYPE_BEACON:
695                 ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
696                                             rx_status);
697                 break;
698         case IEEE80211_STYPE_ACTION:
699                 ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
700                 break;
701         }
702 }
703
704 void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
705 {
706         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
707
708         if (ifmsh->preq_queue_len &&
709             time_after(jiffies,
710                        ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
711                 mesh_path_start_discovery(sdata);
712
713         if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
714                 mesh_mpath_table_grow();
715
716         if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags))
717                 mesh_mpp_table_grow();
718
719         if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
720                 ieee80211_mesh_housekeeping(sdata, ifmsh);
721
722         if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
723                 ieee80211_mesh_rootpath(sdata);
724 }
725
726 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
727 {
728         struct ieee80211_sub_if_data *sdata;
729
730         rcu_read_lock();
731         list_for_each_entry_rcu(sdata, &local->interfaces, list)
732                 if (ieee80211_vif_is_mesh(&sdata->vif))
733                         ieee80211_queue_work(&local->hw, &sdata->work);
734         rcu_read_unlock();
735 }
736
737 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
738 {
739         struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
740
741         setup_timer(&ifmsh->housekeeping_timer,
742                     ieee80211_mesh_housekeeping_timer,
743                     (unsigned long) sdata);
744
745         ifmsh->accepting_plinks = true;
746         ifmsh->preq_id = 0;
747         ifmsh->sn = 0;
748         ifmsh->num_gates = 0;
749         atomic_set(&ifmsh->mpaths, 0);
750         mesh_rmc_init(sdata);
751         ifmsh->last_preq = jiffies;
752         ifmsh->next_perr = jiffies;
753         /* Allocate all mesh structures when creating the first mesh interface. */
754         if (!mesh_allocated)
755                 ieee80211s_init();
756         setup_timer(&ifmsh->mesh_path_timer,
757                     ieee80211_mesh_path_timer,
758                     (unsigned long) sdata);
759         setup_timer(&ifmsh->mesh_path_root_timer,
760                     ieee80211_mesh_path_root_timer,
761                     (unsigned long) sdata);
762         INIT_LIST_HEAD(&ifmsh->preq_queue.list);
763         spin_lock_init(&ifmsh->mesh_preq_queue_lock);
764 }