+static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+{
+ s64 rc = OPAL_HARDWARE;
+
+ while (1) {
+ rc = opal_pci_poll(phb->opal_id);
+ if (rc <= 0)
+ break;
+
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * rc);
+ else
+ msleep(rc);
+ }
+
+ return rc;
+}
+
+int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
+{
+ struct pnv_phb *phb = hose->private_data;
+ s64 rc = OPAL_HARDWARE;
+
+ pr_debug("%s: Reset PHB#%x, option=%d\n",
+ __func__, hose->global_number, option);
+
+ /* Issue PHB complete reset request */
+ if (option == EEH_RESET_FUNDAMENTAL ||
+ option == EEH_RESET_HOT)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_COMPLETE,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_DEACTIVATE)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PHB_COMPLETE,
+ OPAL_DEASSERT_RESET);
+ if (rc < 0)
+ goto out;
+
+ /*
+ * Poll state of the PHB until the request is done
+ * successfully. The PHB reset is usually PHB complete
+ * reset followed by hot reset on root bus. So we also
+ * need the PCI bus settlement delay.
+ */
+ rc = pnv_eeh_phb_poll(phb);
+ if (option == EEH_RESET_DEACTIVATE) {
+ if (system_state < SYSTEM_RUNNING)
+ udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+ else
+ msleep(EEH_PE_RST_SETTLE_TIME);
+ }
+out:
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+
+static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
+{
+ struct pnv_phb *phb = hose->private_data;
+ s64 rc = OPAL_HARDWARE;
+
+ pr_debug("%s: Reset PHB#%x, option=%d\n",
+ __func__, hose->global_number, option);
+
+ /*
+ * During the reset deassert time, we needn't care
+ * the reset scope because the firmware does nothing
+ * for fundamental or hot reset during deassert phase.
+ */
+ if (option == EEH_RESET_FUNDAMENTAL)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PCI_FUNDAMENTAL,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_HOT)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PCI_HOT,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_DEACTIVATE)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_RESET_PCI_HOT,
+ OPAL_DEASSERT_RESET);
+ if (rc < 0)
+ goto out;
+
+ /* Poll state of the PHB until the request is done */
+ rc = pnv_eeh_phb_poll(phb);
+ if (option == EEH_RESET_DEACTIVATE)
+ msleep(EEH_PE_RST_SETTLE_TIME);
+out:
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+
+static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+{
+ struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+ int aer = edev ? edev->aer_cap : 0;
+ u32 ctrl;
+
+ pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
+ __func__, pci_domain_nr(dev->bus),
+ dev->bus->number, option);
+
+ switch (option) {
+ case EEH_RESET_FUNDAMENTAL:
+ case EEH_RESET_HOT:
+ /* Don't report linkDown event */
+ if (aer) {
+ eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, &ctrl);
+ ctrl |= PCI_ERR_UNC_SURPDN;
+ eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, ctrl);
+ }
+
+ eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+ msleep(EEH_PE_RST_HOLD_TIME);
+ break;
+ case EEH_RESET_DEACTIVATE:
+ eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &ctrl);
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ eeh_ops->write_config(pdn, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+ msleep(EEH_PE_RST_SETTLE_TIME);
+
+ /* Continue reporting linkDown event */
+ if (aer) {
+ eeh_ops->read_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, &ctrl);
+ ctrl &= ~PCI_ERR_UNC_SURPDN;
+ eeh_ops->write_config(pdn, aer + PCI_ERR_UNCOR_MASK,
+ 4, ctrl);
+ }
+
+ break;
+ }
+
+ return 0;
+}
+
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+
+ if (pci_is_root_bus(dev->bus)) {
+ hose = pci_bus_to_host(dev->bus);
+ pnv_eeh_root_reset(hose, EEH_RESET_HOT);
+ pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+ } else {
+ pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
+ pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+ }
+}
+