+/*
+ * This type of clock has a glitch-free mux that switches between the output of
+ * the M/N counter and an always on clock source (XO). When clk_set_rate() is
+ * called we need to make sure that we don't switch to the M/N counter if it
+ * isn't clocking because the mux will get stuck and the clock will stop
+ * outputting a clock. This can happen if the framework isn't aware that this
+ * clock is on and so clk_set_rate() doesn't turn on the new parent. To fix
+ * this we switch the mux in the enable/disable ops and reprogram the M/N
+ * counter in the set_rate op. We also make sure to switch away from the M/N
+ * counter in set_rate if software thinks the clock is off.
+ */
+static int clk_rcg_lcc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_rcg *rcg = to_clk_rcg(hw);
+ const struct freq_tbl *f;
+ int ret;
+ u32 gfm = BIT(10);
+
+ f = qcom_find_freq(rcg->freq_tbl, rate);
+ if (!f)
+ return -EINVAL;
+
+ /* Switch to XO to avoid glitches */
+ regmap_update_bits(rcg->clkr.regmap, rcg->ns_reg, gfm, 0);
+ ret = __clk_rcg_set_rate(rcg, f);
+ /* Switch back to M/N if it's clocking */
+ if (__clk_is_enabled(hw->clk))
+ regmap_update_bits(rcg->clkr.regmap, rcg->ns_reg, gfm, gfm);
+
+ return ret;
+}
+
+static int clk_rcg_lcc_enable(struct clk_hw *hw)
+{
+ struct clk_rcg *rcg = to_clk_rcg(hw);
+ u32 gfm = BIT(10);
+
+ /* Use M/N */
+ return regmap_update_bits(rcg->clkr.regmap, rcg->ns_reg, gfm, gfm);
+}
+
+static void clk_rcg_lcc_disable(struct clk_hw *hw)
+{
+ struct clk_rcg *rcg = to_clk_rcg(hw);
+ u32 gfm = BIT(10);
+
+ /* Use XO */
+ regmap_update_bits(rcg->clkr.regmap, rcg->ns_reg, gfm, 0);
+}
+