5.1 Joystick Event Reporting
-In this mode, the ikbd generates a record whever the joystick position is
+In this mode, the ikbd generates a record whenever the joystick position is
changed (i.e. for each opening or closing of a joystick switch or trigger).
The joystick event record is two bytes of the form:
the mouse. After any joystick command, the ikbd assumes that joysticks are
connected to both Joystick0 and Joystick1. Any mouse command (except MOUSE
DISABLE) then causes port 0 to again be scanned as if it were a mouse, and
-both buttons are logically connected to it. If a mouse diable command is
+both buttons are logically connected to it. If a mouse disable command is
received while port 0 is presumed to be a mouse, the button is logically
-assigned to Joystick1 ( until the mouse is reenabled by another mouse command).
+assigned to Joystick1 (until the mouse is reenabled by another mouse command).
9. ikbd Command Set
9.7 SET MOUSE SCALE
0x0C
- X ; horizontal mouse ticks per internel X
- Y ; vertical mouse ticks per internel Y
+ X ; horizontal mouse ticks per internal X
+ Y ; vertical mouse ticks per internal Y
This command sets the scale factor for the ABSOLUTE MOUSE POSITIONING mode.
In this mode, the specified number of mouse phase changes ('clicks') must
0x0F
This command makes the origin of the Y axis to be at the bottom of the
-logical coordinate system internel to the ikbd for all relative or absolute
+logical coordinate system internal to the ikbd for all relative or absolute
mouse motion. This causes mouse motion toward the user to be negative in sign
and away from the user to be positive.
10. SCAN CODES
-The key scan codes return by the ikbd are chosen to simplify the
-implementaion of GSX.
+The key scan codes returned by the ikbd are chosen to simplify the
+implementation of GSX.
GSX Standard Keyboard Mapping.