[media] doc-rst: Move v4l docs to media/v4l-drivers

[cascardo/linux.git] / Documentation / video4linux / README.cx88

diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88
deleted file mode 100644 (file)
index b09ce36..0000000
--- a/Documentation/video4linux/README.cx88
+++ /dev/null
@@ -1,67 +0,0 @@
-cx8800 release notes
-====================
-
-This is a v4l2 device driver for the cx2388x chip.
-
-
-current status
-==============
-
-video
-       - Basically works.
-       - For now, only capture and read(). Overlay isn't supported.
-
-audio
-       - The chip specs for the on-chip TV sound decoder are next
-         to useless :-/
-       - Neverless the builtin TV sound decoder starts working now,
-         at least for some standards.
-         FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE
-         USING.
-       - Most tuner chips do provide mono sound, which may or may not
-         be useable depending on the board design.  With the Hauppauge
-         cards it works, so there is mono sound available as fallback.
-       - audio data dma (i.e. recording without loopback cable to the
-         sound card) is supported via cx88-alsa.
-
-vbi
-       - Code present. Works for NTSC closed caption. PAL and other
-         TV norms may or may not work.
-
-
-how to add support for new cards
-================================
-
-The driver needs some config info for the TV cards.  This stuff is in
-cx88-cards.c.  If the driver doesn't work well you likely need a new
-entry for your card in that file.  Check the kernel log (using dmesg)
-to see whenever the driver knows your card or not.  There is a line
-like this one:
-
-       cx8800[0]: subsystem: 0070:3400, board: Hauppauge WinTV \
-               34xxx models [card=1,autodetected]
-
-If your card is listed as "board: UNKNOWN/GENERIC" it is unknown to
-the driver.  What to do then?
-
- (1) Try upgrading to the latest snapshot, maybe it has been added
-     meanwhile.
- (2) You can try to create a new entry yourself, have a look at
-     cx88-cards.c.  If that worked, mail me your changes as unified
-     diff ("diff -u").
- (3) Or you can mail me the config information.  I need at least the
-     following information to add the card:
-
-     * the PCI Subsystem ID ("0070:3400" from the line above,
-       "lspci -v" output is fine too).
-     * the tuner type used by the card.  You can try to find one by
-       trial-and-error using the tuner=<n> insmod option.  If you
-       know which one the card has you can also have a look at the
-       list in CARDLIST.tuner
-
-Have fun,
-
-  Gerd
-
---
-Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]