select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+ select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_XZ
select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_C_RECORDMCOUNT
select HAVE_GENERIC_HARDIRQS
- select HAVE_SPARSE_IRQ
select GENERIC_IRQ_SHOW
select CPU_PM if (SUSPEND || CPU_IDLE)
select GENERIC_PCI_IOMAP
+ select HAVE_BPF_JIT if NET
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
config SYS_SUPPORTS_APM_EMULATION
bool
-config HAVE_SCHED_CLOCK
- bool
-
config GENERIC_GPIO
bool
config NEED_DMA_MAP_STATE
def_bool y
+config ARCH_HAS_DMA_SET_COHERENT_MASK
+ bool
+
config GENERIC_ISA_DMA
bool
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
+config NEED_MACH_IO_H
+ bool
+ help
+ Select this when mach/io.h is required to provide special
+ definitions for this platform. The need for mach/io.h should
+ be avoided when possible.
+
config NEED_MACH_MEMORY_H
bool
help
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for ARM's Integrator platform.
select HAVE_CLK
select HAVE_PATA_PLATFORM
select ICST
+ select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
help
select HAVE_CLK
select CLKDEV_LOOKUP
select IRQ_DOMAIN
+ select NEED_MACH_IO_H if PCCARD
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 processors.
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_SMP
+ select SPARSE_IRQ
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
select ISA
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
This is an evaluation board for the StrongARM processor available
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
select HAVE_IDE
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select HAVE_SCHED_CLOCK
select MULTI_IRQ_HANDLER
help
Support for Freescale MXC/iMX-based family of processors
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
help
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
Support for Intel's IXP23xx (XScale) family of processors.
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
+ select ARCH_HAS_DMA_SET_COHERENT_MASK
select CLKSRC_MMIO
select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_CLOCKEVENTS
- select HAVE_SCHED_CLOCK
select MIGHT_HAVE_PCI
+ select NEED_MACH_IO_H
select DMABOUNCE if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the Marvell Dove SoC 88AP510
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Kirkwood series SoCs:
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell MV78xx0 series SoCs:
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select GPIO_PXA
- select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
- select HAVE_SCHED_CLOCK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
select DW_APB_TIMER
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
- select HAVE_SCHED_CLOCK
select HAVE_TCM
select NO_IOPORT
select SPARSE_IRQ
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select GPIO_PXA
- select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
select HAVE_IDE
+ select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
select CPU_FREQ
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
- select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_IO_H
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
select CLKSRC_MMIO
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select GENERIC_CLOCKEVENTS
- select HAVE_SCHED_CLOCK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
help
select CLKSRC_MMIO
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
- select HAVE_SCHED_CLOCK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select PCI
select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_MEMORY_H
+ select NEED_MACH_IO_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
depends on MMU
select CLKSRC_MMIO
select CPU_ARM926T
- select HAVE_SCHED_CLOCK
select HAVE_TCM
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARCH_HAS_CPUFREQ
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
- select HAVE_SCHED_CLOCK
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1/2/3/4).
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
- select HAVE_SCHED_CLOCK
config PLAT_ORION
bool
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select HAVE_SCHED_CLOCK
config PLAT_PXA
bool
projects / cascardo / linux.git / blobdiff