Merge branch 'linus' into locking/urgent, to pick up fixes

[cascardo/linux.git] / arch / arm / Kconfig.debug

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1098e91..a9693b6 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -109,23 +109,41 @@ choice
                    0x80020000      | 0xf0020000     | UART8
                    0x80024000      | 0xf0024000     | UART9
 
-       config DEBUG_AT91_UART
-               bool "Kernel low-level debugging on Atmel SoCs"
-               depends on ARCH_AT91
+       config DEBUG_AT91_RM9200_DBGU
+               bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+               select DEBUG_AT91_UART
+               depends on SOC_AT91RM9200 || SOC_AT91SAM9
                help
-                 Say Y here if you want the debug print routines to direct
-                 their output to the serial port on atmel devices.
+                 Say Y here if you want kernel low-level debugging support
+                 on the DBGU port of:
+                   at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+                   at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
 
-                 SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT
-                 rm9200, 9260/9g20,   0xfffff200        0xfefff200       DBGU
-                 9261/9g10, 9rl
-                 9263, 9g45, sama5d3  0xffffee00        0xfeffee00       DBGU
-                 sama5d4              0xfc00c000        0xfb00c000       USART3
-                 sama5d4              0xfc069000        0xfb069000       DBGU
-                 sama5d2              0xf8020000        0xf7020000       UART1
+       config DEBUG_AT91_SAM9263_DBGU
+               bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+               select DEBUG_AT91_UART
+               depends on SOC_AT91SAM9 || SOC_SAMA5D3
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on the DBGU port of:
+                   at91sam9263, at91sam9g45, at91sam9m10,
+                   sama5d3
 
-                 Please adjust DEBUG_UART_PHYS configuration options based on
-                 your needs.
+       config DEBUG_AT91_SAMA5D2_UART1
+               bool "Kernel low-level debugging on SAMA5D2 UART1"
+               select DEBUG_AT91_UART
+               depends on SOC_SAMA5D2
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on the UART1 port of sama5d2.
+
+       config DEBUG_AT91_SAMA5D4_USART3
+               bool "Kernel low-level debugging on SAMA5D4 USART3"
+               select DEBUG_AT91_UART
+               depends on SOC_SAMA5D4
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on the USART3 port of sama5d4.
 
        config DEBUG_BCM2835
                bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -138,8 +156,8 @@ choice
                select DEBUG_UART_PL01X
 
        config DEBUG_BCM_5301X
-               bool "Kernel low-level debugging on BCM5301X UART1"
-               depends on ARCH_BCM_5301X
+               bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+               depends on ARCH_BCM_5301X || ARCH_BCM_NSP
                select DEBUG_UART_8250
 
        config DEBUG_BCM_KONA_UART
@@ -268,14 +286,6 @@ choice
                  Say Y here if you want kernel low-level debugging support
                  on HI3620 UART.
 
-       config DEBUG_HI3716_UART
-               bool "Hisilicon Hi3716 Debug UART"
-               depends on ARCH_HI3xxx
-               select DEBUG_UART_PL01X
-               help
-                 Say Y here if you want kernel low-level debugging support
-                 on HI3716 UART.
-
        config DEBUG_HIGHBANK_UART
                bool "Kernel low-level debugging messages via Highbank UART"
                depends on ARCH_HIGHBANK
@@ -1304,6 +1314,10 @@ choice
 
 endchoice
 
+config DEBUG_AT91_UART
+       bool
+       depends on ARCH_AT91
+
 config DEBUG_EXYNOS_UART
        bool
 
@@ -1510,8 +1524,10 @@ config DEBUG_UART_PHYS
        default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
        default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
        default 0xf7fc9000 if DEBUG_BERLIN_UART
+       default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
        default 0xf8b00000 if DEBUG_HIX5HD2_UART
        default 0xf991e000 if DEBUG_QCOM_UARTDM
+       default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
        default 0xfcb00000 if DEBUG_HI3620_UART
        default 0xfd883000 if DEBUG_ALPINE_UART0
        default 0xfe800000 if ARCH_IOP32X
@@ -1526,6 +1542,8 @@ config DEBUG_UART_PHYS
        default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
        default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
        default 0xfffe8600 if DEBUG_BCM63XX_UART
+       default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+       default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
        default 0xfffff700 if ARCH_IOP33X
        depends on ARCH_EP93XX || \
                DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1574,13 +1592,17 @@ config DEBUG_UART_VIRT
                                DEBUG_S3C2410_UART1)
        default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
                                DEBUG_S3C2410_UART2)
+       default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
        default 0xf7fc9000 if DEBUG_BERLIN_UART
        default 0xf8007000 if DEBUG_HIP04_UART
        default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
        default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+       default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+       default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
        default 0xfa71e000 if DEBUG_QCOM_UARTDM
        default 0xfb002000 if DEBUG_CNS3XXX
        default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+       default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
        default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
        default 0xfc40ab00 if DEBUG_BRCMSTB_UART
        default 0xfc705000 if DEBUG_ZTE_ZX
@@ -1635,7 +1657,8 @@ config DEBUG_UART_VIRT
                DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
                DEBUG_S3C64XX_UART || \
                DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-               DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+               DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+               DEBUG_AT91_UART
 
 config DEBUG_UART_8250_SHIFT
        int "Register offset shift for the 8250 debug UART"