* published by the Free Software Foundation.
*/
-#include "skeleton.dtsi"
+#include "exynos54xx.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "samsung,exynos5410", "samsung,exynos5";
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- CPU0: cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
clock-frequency = <1600000000>;
};
- CPU1: cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
clock-frequency = <1600000000>;
};
- CPU2: cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
clock-frequency = <1600000000>;
};
- CPU3: cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
#size-cells = <1>;
ranges;
- combiner: interrupt-controller@10440000 {
- compatible = "samsung,exynos4210-combiner";
- #interrupt-cells = <2>;
- interrupt-controller;
- samsung,combiner-nr = <32>;
- reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
- };
-
- gic: interrupt-controller@10481000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
- <0x10484000 0x2000>,
- <0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
- reg = <0x10000000 0x100>;
- };
-
- sromc: memory-controller@12250000 {
- compatible = "samsung,exynos4210-srom";
- reg = <0x12250000 0x14>;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x04000000 0x20000
- 1 0 0x05000000 0x20000
- 2 0 0x06000000 0x20000
- 3 0 0x07000000 0x20000>;
- };
-
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5410-pmu", "syscon";
reg = <0x10040000 0x5000>;
+ clock-names = "clkout16";
+ clocks = <&fin_pll>;
+ #clock-cells = <1>;
};
- mct: mct@101C0000 {
- compatible = "samsung,exynos4210-mct";
- reg = <0x101C0000 0xB00>;
- interrupt-parent = <&interrupt_map>;
- interrupts = <0>, <1>, <2>, <3>,
- <4>, <5>, <6>, <7>,
- <8>, <9>, <10>, <11>;
- clocks = <&fin_pll>, <&clock CLK_MCT>;
- clock-names = "fin_pll", "mct";
-
- interrupt_map: interrupt-map {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0 &combiner 23 3>,
- <1 &combiner 23 4>,
- <2 &combiner 25 2>,
- <3 &combiner 25 3>,
- <4 &gic 0 120 0>,
- <5 &gic 0 121 0>,
- <6 &gic 0 122 0>,
- <7 &gic 0 123 0>,
- <8 &gic 0 128 0>,
- <9 &gic 0 129 0>,
- <10 &gic 0 130 0>,
- <11 &gic 0 131 0>;
- };
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5410-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
};
- sysram@02020000 {
- compatible = "mmio-sram";
- reg = <0x02020000 0x54000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x02020000 0x54000>;
+ tmu_cpu0: tmu@10060000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 65 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
- smp-sysram@0 {
- compatible = "samsung,exynos4210-sysram";
- reg = <0x0 0x1000>;
- };
+ tmu_cpu1: tmu@10064000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10064000 0x100>;
+ interrupts = <GIC_SPI 183 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
- smp-sysram@53000 {
- compatible = "samsung,exynos4210-sysram-ns";
- reg = <0x53000 0x1000>;
- };
+ tmu_cpu2: tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10068000 0x100>;
+ interrupts = <GIC_SPI 184 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
- clock: clock-controller@10010000 {
- compatible = "samsung,exynos5410-clock";
- reg = <0x10010000 0x30000>;
- #clock-cells = <1>;
+ tmu_cpu3: tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x1006c000 0x100>;
+ interrupts = <GIC_SPI 185 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
mmc_0: mmc@12200000 {
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
+ };
- uart0: serial@12C00000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0>;
+ #include "exynos5420-trip-points.dtsi"
};
-
- uart1: serial@12C10000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1>;
+ #include "exynos5420-trip-points.dtsi"
};
-
- uart2: serial@12C20000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2>;
+ #include "exynos5420-trip-points.dtsi"
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3>;
+ #include "exynos5420-trip-points.dtsi"
};
};
};
+&i2c_0 {
+ clocks = <&clock CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+ clocks = <&clock CLK_I2C1>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+ clocks = <&clock CLK_I2C2>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+ clocks = <&clock CLK_I2C3>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+ clocks = <&clock CLK_USI0>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+ clocks = <&clock CLK_USI1>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+ clocks = <&clock CLK_USI2>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+ clocks = <&clock CLK_USI3>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+ clocks = <&fin_pll>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+ clocks = <&clock CLK_PWM>;
+ clock-names = "timers";
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&sss {
+ clocks = <&clock CLK_SSS>;
+ clock-names = "secss";
+};
+
+&sromc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000 0x20000
+ 1 0 0x05000000 0x20000
+ 2 0 0x06000000 0x20000
+ 3 0 0x07000000 0x20000>;
+};
+
+&usbdrd3_0 {
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+ interrupts = <GIC_SPI 200 0>;
+};
+
+&usbdrd_phy1 {
+ clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usbhost2 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usb2_phy {
+ clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
#include "exynos5410-pinctrl.dtsi"
projects / cascardo / linux.git / blobdiff